[UTC 2018-12-12 17:36:12] 17:36:13 Received message from Master: op=Log open serial=98045 17:36:13 Log file open: Observatory C:\PKZPrograms\Logs\20181211 \ PKZ20181212173613_Observatory.txt 17:36:13 Previous log file: 17:36:17 Received message from Master: op=Log directory change serial=98047 17:36:17 Log file directory changed from C:\PKZPrograms\Logs\20181211 to C:\PKZPrograms\Logs\20181212 17:36:17 Log file name is PKZ20181212173617_Observatory.txt 17:45:28 Received message from Master: op=Identify serial=98055 17:55:28 No messages received for 10 min. 6355 sent since last one of these. 17:55:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 17:55:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 17:55:28 MsgArea S: [UTC 2018-12-12 17:55:54] 18:05:28 No messages received for 10 min. 0 sent since last one of these. 18:05:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 18:05:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:05:28 MsgArea S: 18:15:28 No messages received for 10 min. 0 sent since last one of these. 18:15:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 18:15:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:15:28 MsgArea S: [UTC 2018-12-12 18:15:54] 18:25:28 No messages received for 10 min. 0 sent since last one of these. 18:25:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 18:25:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:25:28 MsgArea S: 18:35:28 No messages received for 10 min. 0 sent since last one of these. 18:35:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 18:35:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:35:28 MsgArea S: [UTC 2018-12-12 18:35:53] 18:45:28 No messages received for 10 min. 0 sent since last one of these. 18:45:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 18:45:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:45:28 MsgArea S: 18:55:28 No messages received for 10 min. 0 sent since last one of these. 18:55:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 18:55:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:55:28 MsgArea S: [UTC 2018-12-12 18:55:53] 19:05:28 No messages received for 10 min. 0 sent since last one of these. 19:05:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 19:05:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:05:28 MsgArea S: 19:15:28 No messages received for 10 min. 0 sent since last one of these. 19:15:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 19:15:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:15:28 MsgArea S: [UTC 2018-12-12 19:15:53] 19:25:28 No messages received for 10 min. 0 sent since last one of these. 19:25:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 19:25:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:25:28 MsgArea S: 19:35:28 No messages received for 10 min. 0 sent since last one of these. 19:35:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 19:35:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:35:28 MsgArea S: [UTC 2018-12-12 19:35:53] 19:45:28 No messages received for 10 min. 0 sent since last one of these. 19:45:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 19:45:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:45:28 MsgArea S: 19:55:28 No messages received for 10 min. 0 sent since last one of these. 19:55:28 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 19:55:28 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:55:28 MsgArea S: [UTC 2018-12-12 19:55:53] 20:05:27 No messages received for 10 min. 0 sent since last one of these. 20:05:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 20:05:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:05:27 MsgArea S: 20:15:27 No messages received for 10 min. 0 sent since last one of these. 20:15:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 20:15:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:15:27 MsgArea S: [UTC 2018-12-12 20:15:53] 20:25:27 No messages received for 10 min. 0 sent since last one of these. 20:25:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 20:25:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:25:27 MsgArea S: 20:35:27 No messages received for 10 min. 0 sent since last one of these. 20:35:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 20:35:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:35:27 MsgArea S: [UTC 2018-12-12 20:35:53] 20:45:27 No messages received for 10 min. 0 sent since last one of these. 20:45:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 20:45:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:45:27 MsgArea S: 20:55:27 No messages received for 10 min. 0 sent since last one of these. 20:55:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 20:55:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:55:27 MsgArea S: [UTC 2018-12-12 20:55:53] 21:05:27 No messages received for 10 min. 0 sent since last one of these. 21:05:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 21:05:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:05:27 MsgArea S: 21:15:27 No messages received for 10 min. 0 sent since last one of these. 21:15:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 21:15:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:15:27 MsgArea S: [UTC 2018-12-12 21:15:53] 21:25:27 No messages received for 10 min. 0 sent since last one of these. 21:25:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 21:25:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:25:27 MsgArea S: 21:35:27 No messages received for 10 min. 0 sent since last one of these. 21:35:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 21:35:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:35:27 MsgArea S: [UTC 2018-12-12 21:35:53] 21:45:27 No messages received for 10 min. 0 sent since last one of these. 21:45:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 21:45:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:45:27 MsgArea S: 21:55:27 No messages received for 10 min. 0 sent since last one of these. 21:55:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 21:55:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:55:27 MsgArea S: [UTC 2018-12-12 21:55:53] 22:05:27 No messages received for 10 min. 0 sent since last one of these. 22:05:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 22:05:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:05:27 MsgArea S: 22:15:27 No messages received for 10 min. 0 sent since last one of these. 22:15:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 22:15:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:15:27 MsgArea S: [UTC 2018-12-12 22:15:53] 22:25:27 No messages received for 10 min. 0 sent since last one of these. 22:25:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 22:25:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:25:27 MsgArea S: 22:35:27 No messages received for 10 min. 0 sent since last one of these. 22:35:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 22:35:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:35:27 MsgArea S: [UTC 2018-12-12 22:35:53] 22:45:27 No messages received for 10 min. 0 sent since last one of these. 22:45:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 22:45:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:45:27 MsgArea S: 22:55:27 No messages received for 10 min. 0 sent since last one of these. 22:55:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 22:55:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:55:27 MsgArea S: [UTC 2018-12-12 22:55:53] 23:05:27 No messages received for 10 min. 0 sent since last one of these. 23:05:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 23:05:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:05:27 MsgArea S: 23:15:27 No messages received for 10 min. 0 sent since last one of these. 23:15:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 23:15:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:15:27 MsgArea S: [UTC 2018-12-12 23:15:53] 23:25:27 No messages received for 10 min. 0 sent since last one of these. 23:25:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 23:25:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:25:27 MsgArea S: 23:35:27 No messages received for 10 min. 0 sent since last one of these. 23:35:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 23:35:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:35:27 MsgArea S: [UTC 2018-12-12 23:35:53] 23:45:27 No messages received for 10 min. 0 sent since last one of these. 23:45:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 23:45:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:45:27 MsgArea S: 23:55:27 No messages received for 10 min. 0 sent since last one of these. 23:55:27 MsgArea H: nextMessageSerial=98058 startMsgs=68 nextFree=47940 maxMsg=65468 23:55:27 MsgArea Q: Master=47328:47736 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:55:27 MsgArea S: [UTC 2018-12-12 23:55:53] 23:57:52 Received message from Master: op=PointingHead serial=98059 23:57:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:57:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:57:52 Point started: ret=0 23:57:52 point_skyscan result=0 23:57:53 Check angles 23:57:53 SkyScan query 23:57:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:57:53 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:57:53 Message to Master queued w/err=0: serial=98059 error=0 23:57:58 Received message from Master: op=Filter serial=98060 23:57:58 Color wheel filter change from 2 to 2 23:57:58 FLIGetFilterPos err=0 currentPosition=2 23:57:58 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:58 Filter is already there-color wheel unchanged 23:57:58 Received message from Master: op=Shutter serial=98061 23:57:58 Shutter LASER close 23:58:00 Received message from Camera: op=State serial=98063 23:58:00 GetSingleValue result=40 Value=cccccccc 23:58:00 SkyScan query 23:58:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:58:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:00 Parameters OK 23:58:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:00 Set A/D data flow result=40 23:58:00 Set A/D channel type result=40 23:58:00 Set A/D encoding result=40 23:58:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:00 Set channel filter=0.000000e+000 result=40 23:58:00 Config A/D Result=40 23:58:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:00 Get A/D filter: -9.255963e+061 result=40 23:58:00 Get A/D value=-858993460 result=40 23:58:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:00 Parameters OK 23:58:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:00 Set A/D data flow result=40 23:58:00 Set A/D channel type result=40 23:58:00 Set A/D encoding result=40 23:58:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:00 Set channel filter=0.000000e+000 result=40 23:58:00 Config A/D Result=40 23:58:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:00 Get A/D filter: -9.255963e+061 result=40 23:58:00 Get A/D value=-858993460 result=40 23:58:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:58:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:58:00 Aux= 23:58:00 Message to Camera, serial 98063 queued 23:58:06 Received message from Master: op=PointingHead serial=98074 23:58:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:58:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:58:07 Point started: ret=0 23:58:07 point_skyscan result=0 23:58:07 Check angles 23:58:07 SkyScan query 23:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:58:08 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:58:08 Message to Master queued w/err=0: serial=98074 error=0 23:58:13 Received message from Master: op=Filter serial=98075 23:58:13 Color wheel filter change from 2 to 2 23:58:13 FLIGetFilterPos err=0 currentPosition=2 23:58:13 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:13 Filter is already there-color wheel unchanged 23:58:13 Received message from Master: op=Shutter serial=98076 23:58:13 Shutter LASER close 23:58:13 Received message from Camera: op=State serial=98078 23:58:13 GetSingleValue result=40 Value=cccccccc 23:58:13 SkyScan query 23:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:58:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:14 Parameters OK 23:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:14 Set A/D data flow result=40 23:58:14 Set A/D channel type result=40 23:58:14 Set A/D encoding result=40 23:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:14 Set channel filter=0.000000e+000 result=40 23:58:14 Config A/D Result=40 23:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:14 Get A/D filter: -9.255963e+061 result=40 23:58:14 Get A/D value=-858993460 result=40 23:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:14 Parameters OK 23:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:14 Set A/D data flow result=40 23:58:14 Set A/D channel type result=40 23:58:14 Set A/D encoding result=40 23:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:14 Set channel filter=0.000000e+000 result=40 23:58:14 Config A/D Result=40 23:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:14 Get A/D filter: -9.255963e+061 result=40 23:58:14 Get A/D value=-858993460 result=40 23:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:58:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:58:14 Aux= 23:58:14 Message to Camera, serial 98078 queued 23:58:50 Received message from Master: op=PointingHead serial=98090 23:58:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:58:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:58:50 Point started: ret=0 23:58:50 point_skyscan result=0 23:58:51 Check angles 23:58:51 SkyScan query 23:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:58:51 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:58:51 Message to Master queued w/err=0: serial=98090 error=0 23:58:56 Received message from Master: op=Filter serial=98091 23:58:56 Color wheel filter change from 2 to 2 23:58:56 FLIGetFilterPos err=0 currentPosition=2 23:58:56 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:56 Filter is already there-color wheel unchanged 23:58:56 Received message from Master: op=Shutter serial=98092 23:58:56 Shutter LASER open 23:58:57 Received message from Camera: op=State serial=98094 23:58:57 GetSingleValue result=40 Value=cccccccc 23:58:57 SkyScan query 23:58:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:58:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:57 Parameters OK 23:58:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:57 Set A/D data flow result=40 23:58:57 Set A/D channel type result=40 23:58:57 Set A/D encoding result=40 23:58:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:57 Set channel filter=0.000000e+000 result=40 23:58:57 Config A/D Result=40 23:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:57 Get A/D filter: -9.255963e+061 result=40 23:58:57 Get A/D value=-858993460 result=40 23:58:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:57 Parameters OK 23:58:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:57 Set A/D data flow result=40 23:58:57 Set A/D channel type result=40 23:58:57 Set A/D encoding result=40 23:58:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:57 Set channel filter=0.000000e+000 result=40 23:58:57 Config A/D Result=40 23:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:57 Get A/D filter: -9.255963e+061 result=40 23:58:57 Get A/D value=-858993460 result=40 23:58:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:58:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:58:57 Aux= 23:58:57 Message to Camera, serial 98094 queued 23:59:06 Received message from Master: op=Shutter serial=98104 23:59:06 Shutter LASER close 23:59:06 Received message from Master: op=PointingHead serial=98108 23:59:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:59:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:59:06 Point started: ret=0 23:59:06 point_skyscan result=0 23:59:07 Check angles 23:59:07 SkyScan query 23:59:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:59:08 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:59:08 Message to Master queued w/err=0: serial=98108 error=0 23:59:13 Received message from Master: op=Filter serial=98109 23:59:13 Color wheel filter change from 2 to 2 23:59:13 FLIGetFilterPos err=0 currentPosition=2 23:59:13 FLIGetStepsRemaining err=0 RemainingSteps=0 23:59:13 Filter is already there-color wheel unchanged 23:59:13 Received message from Master: op=Shutter serial=98110 23:59:13 Shutter LASER close 23:59:13 Received message from Camera: op=State serial=98112 23:59:13 GetSingleValue result=40 Value=cccccccc 23:59:13 SkyScan query 23:59:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:59:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:14 Parameters OK 23:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:14 Set A/D data flow result=40 23:59:14 Set A/D channel type result=40 23:59:14 Set A/D encoding result=40 23:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:14 Set channel filter=0.000000e+000 result=40 23:59:14 Config A/D Result=40 23:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:14 Get A/D filter: -9.255963e+061 result=40 23:59:14 Get A/D value=-858993460 result=40 23:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:14 Parameters OK 23:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:14 Set A/D data flow result=40 23:59:14 Set A/D channel type result=40 23:59:14 Set A/D encoding result=40 23:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:14 Set channel filter=0.000000e+000 result=40 23:59:14 Config A/D Result=40 23:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:14 Get A/D filter: -9.255963e+061 result=40 23:59:14 Get A/D value=-858993460 result=40 23:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:59:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:59:14 Aux= 23:59:14 Message to Camera, serial 98112 queued 23:59:22 Received message from Master: op=PointingHead serial=98124 23:59:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 23:59:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 23:59:22 Point started: ret=0 23:59:22 point_skyscan result=0 23:59:23 Check angles 23:59:23 SkyScan query 23:59:23 SkyScan query done: ret=0 az=136.2<-9080 ze=-142.905<-21527 Statuses=0009 0009 23:59:23 Msec=0 True Az=136.2 Ze=-142.905 Az status=0009 Ze status=0009 23:59:23 Check angles 23:59:23 SkyScan query 23:59:24 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.95<-20130 Statuses=0009 0009 23:59:24 Msec=750 True Az=153.75 Ze=-121.95 Az status=0009 Ze status=0009 23:59:24 Check angles 23:59:24 SkyScan query 23:59:25 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.575<-18705 Statuses=0009 0009 23:59:25 Msec=1500 True Az=171.585 Ze=-100.575 Az status=0009 Ze status=0009 23:59:25 Check angles 23:59:25 SkyScan query 23:59:26 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.605<-17307 Statuses=0008 0009 23:59:26 Msec=2250 True Az=176.025 Ze=-79.605 Az status=0008 Ze status=0009 23:59:26 Check angles 23:59:26 SkyScan query 23:59:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.665<-15911 Statuses=0008 0009 23:59:26 Msec=3000 True Az=175.995 Ze=-58.665 Az status=0008 Ze status=0009 23:59:26 Check angles 23:59:26 SkyScan query 23:59:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 23:59:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 23:59:27 Message to Master queued w/err=0: serial=98124 error=0 23:59:32 Received message from Master: op=Filter serial=98125 23:59:32 Color wheel filter change from 2 to 0 23:59:32 FLIGetFilterPos err=0 currentPosition=2 23:59:32 FLIGetStepsRemaining err=0 RemainingSteps=0 23:59:38 FLISetFilterPos err=0 rqPosition=0 23:59:38 FLIGetStepsRemaining err=0 RemainingSteps=0 23:59:38 Check after 0.00 sec for filter wheel DIn/CWh=0 23:59:38 FLIGetFilterPos err=0 currentPosition=0 23:59:38 FLIGetStepsRemaining err=0 RemainingSteps=0 23:59:38 Received message from Master: op=Shutter serial=98126 23:59:38 Shutter LASER close 23:59:39 Received message from Camera: op=State serial=98128 23:59:39 GetSingleValue result=40 Value=cccccccc 23:59:39 SkyScan query 23:59:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 23:59:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:39 Parameters OK 23:59:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:39 Set A/D data flow result=40 23:59:39 Set A/D channel type result=40 23:59:39 Set A/D encoding result=40 23:59:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:39 Set channel filter=0.000000e+000 result=40 23:59:39 Config A/D Result=40 23:59:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:39 Get A/D filter: -9.255963e+061 result=40 23:59:39 Get A/D value=-858993460 result=40 23:59:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:39 Parameters OK 23:59:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:39 Set A/D data flow result=40 23:59:39 Set A/D channel type result=40 23:59:39 Set A/D encoding result=40 23:59:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:39 Set channel filter=0.000000e+000 result=40 23:59:39 Config A/D Result=40 23:59:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:39 Get A/D filter: -9.255963e+061 result=40 23:59:39 Get A/D value=-858993460 result=40 23:59:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:59:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:59:39 Aux= 23:59:39 Message to Camera, serial 98128 queued 00:00:16 Received message from Master: op=PointingHead serial=98141 00:00:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:00:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:00:16 Point started: ret=0 00:00:16 point_skyscan result=0 00:00:17 Check angles 00:00:17 SkyScan query 00:00:18 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.51<-13434 Statuses=0009 0009 00:00:18 Msec=0 True Az=152.79 Ze=-21.51 Az status=0009 Ze status=0009 00:00:18 Check angles 00:00:18 SkyScan query 00:00:18 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.525<-12035 Statuses=0009 0009 00:00:18 Msec=750 True Az=135.39 Ze=-0.525 Az status=0009 Ze status=0009 00:00:19 Check angles 00:00:19 SkyScan query 00:00:19 SkyScan query done: ret=0 az=117.42<-7828 ze=20.85<-10610 Statuses=0009 0009 00:00:19 Msec=1500 True Az=117.42 Ze=20.85 Az status=0009 Ze status=0009 00:00:19 Check angles 00:00:19 SkyScan query 00:00:20 SkyScan query done: ret=0 az=100.08<-6672 ze=41.805<-9213 Statuses=0009 0009 00:00:20 Msec=2250 True Az=100.08 Ze=41.805 Az status=0009 Ze status=0009 00:00:20 Check angles 00:00:20 SkyScan query 00:00:21 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:00:21 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:00:21 Check angles 00:00:21 SkyScan query 00:00:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:00:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:00:21 Message to Master queued w/err=0: serial=98141 error=0 00:00:26 Received message from Master: op=Filter serial=98142 00:00:26 Color wheel filter change from 0 to 0 00:00:26 FLIGetFilterPos err=0 currentPosition=0 00:00:26 FLIGetStepsRemaining err=0 RemainingSteps=0 00:00:26 Filter is already there-color wheel unchanged 00:00:27 Received message from Master: op=Shutter serial=98143 00:00:27 Shutter LASER close 00:00:27 Received message from Camera: op=State serial=98145 00:00:27 GetSingleValue result=40 Value=cccccccc 00:00:27 SkyScan query 00:00:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:00:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:27 Parameters OK 00:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:27 Set A/D data flow result=40 00:00:27 Set A/D channel type result=40 00:00:27 Set A/D encoding result=40 00:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:27 Set channel filter=0.000000e+000 result=40 00:00:27 Config A/D Result=40 00:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:27 Get A/D filter: -9.255963e+061 result=40 00:00:27 Get A/D value=-858993460 result=40 00:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:27 Parameters OK 00:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:27 Set A/D data flow result=40 00:00:27 Set A/D channel type result=40 00:00:27 Set A/D encoding result=40 00:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:27 Set channel filter=0.000000e+000 result=40 00:00:27 Config A/D Result=40 00:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:27 Get A/D filter: -9.255963e+061 result=40 00:00:27 Get A/D value=-858993460 result=40 00:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:00:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:00:27 Aux= 00:00:27 Message to Camera, serial 98145 queued 00:01:04 Received message from Master: op=PointingHead serial=98158 00:01:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:01:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:01:04 Point started: ret=0 00:01:04 point_skyscan result=0 00:01:05 Check angles 00:01:05 SkyScan query 00:01:06 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 00:01:06 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 00:01:06 Check angles 00:01:06 SkyScan query 00:01:07 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 00:01:07 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 00:01:07 Check angles 00:01:07 SkyScan query 00:01:07 SkyScan query done: ret=0 az=144.585<-9639 ze=38.505<-9433 Statuses=0009 0008 00:01:07 Msec=1500 True Az=144.585 Ze=38.505 Az status=0009 Ze status=0008 00:01:07 Check angles 00:01:07 SkyScan query 00:01:08 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 00:01:08 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 00:01:08 Check angles 00:01:08 SkyScan query 00:01:09 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:01:09 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:01:09 Check angles 00:01:09 SkyScan query 00:01:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:01:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:01:10 Message to Master queued w/err=0: serial=98158 error=0 00:01:15 Received message from Master: op=Filter serial=98159 00:01:15 Color wheel filter change from 0 to 0 00:01:15 FLIGetFilterPos err=0 currentPosition=0 00:01:15 FLIGetStepsRemaining err=0 RemainingSteps=0 00:01:15 Filter is already there-color wheel unchanged 00:01:15 Received message from Master: op=Shutter serial=98160 00:01:15 Shutter LASER close 00:01:15 Received message from Camera: op=State serial=98162 00:01:15 GetSingleValue result=40 Value=cccccccc 00:01:15 SkyScan query 00:01:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:01:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:15 Parameters OK 00:01:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:15 Set A/D data flow result=40 00:01:15 Set A/D channel type result=40 00:01:15 Set A/D encoding result=40 00:01:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:15 Set channel filter=0.000000e+000 result=40 00:01:15 Config A/D Result=40 00:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:15 Get A/D filter: -9.255963e+061 result=40 00:01:15 Get A/D value=-858993460 result=40 00:01:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:15 Parameters OK 00:01:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:15 Set A/D data flow result=40 00:01:15 Set A/D channel type result=40 00:01:15 Set A/D encoding result=40 00:01:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:15 Set channel filter=0.000000e+000 result=40 00:01:15 Config A/D Result=40 00:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:15 Get A/D filter: -9.255963e+061 result=40 00:01:15 Get A/D value=-858993460 result=40 00:01:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:01:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:01:15 Aux= 00:01:15 Message to Camera, serial 98162 queued 00:01:52 Received message from Master: op=PointingHead serial=98175 00:01:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:01:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:01:53 Point started: ret=0 00:01:53 point_skyscan result=0 00:01:53 Check angles 00:01:53 SkyScan query 00:01:54 SkyScan query done: ret=0 az=152.76<-10184 ze=8.295<-11447 Statuses=0009 0009 00:01:54 Msec=0 True Az=152.76 Ze=8.295 Az status=0009 Ze status=0009 00:01:54 Check angles 00:01:54 SkyScan query 00:01:55 SkyScan query done: ret=0 az=134.865<-8991 ze=-13.08<-12872 Statuses=0009 0009 00:01:55 Msec=750 True Az=134.865 Ze=-13.08 Az status=0009 Ze status=0009 00:01:55 Check angles 00:01:55 SkyScan query 00:01:55 SkyScan query done: ret=0 az=117.36<-7824 ze=-34.02<-14268 Statuses=0009 0009 00:01:55 Msec=1500 True Az=117.36 Ze=-34.02 Az status=0009 Ze status=0009 00:01:56 Check angles 00:01:56 SkyScan query 00:01:56 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.555<-15437 Statuses=0009 0009 00:01:56 Msec=2250 True Az=100.035 Ze=-51.555 Az status=0009 Ze status=0009 00:01:56 Check angles 00:01:56 SkyScan query 00:01:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 00:01:57 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 00:01:57 Check angles 00:01:57 SkyScan query 00:01:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:01:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:01:58 Message to Master queued w/err=0: serial=98175 error=0 00:02:03 Received message from Master: op=Filter serial=98176 00:02:03 Color wheel filter change from 0 to 0 00:02:03 FLIGetFilterPos err=0 currentPosition=0 00:02:03 FLIGetStepsRemaining err=0 RemainingSteps=0 00:02:03 Filter is already there-color wheel unchanged 00:02:03 Received message from Master: op=Shutter serial=98177 00:02:03 Shutter LASER close 00:02:03 Received message from Camera: op=State serial=98179 00:02:03 GetSingleValue result=40 Value=cccccccc 00:02:03 SkyScan query 00:02:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:02:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:03 Parameters OK 00:02:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:03 Set A/D data flow result=40 00:02:03 Set A/D channel type result=40 00:02:03 Set A/D encoding result=40 00:02:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:03 Set channel filter=0.000000e+000 result=40 00:02:03 Config A/D Result=40 00:02:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:03 Get A/D filter: -9.255963e+061 result=40 00:02:03 Get A/D value=-858993460 result=40 00:02:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:03 Parameters OK 00:02:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:03 Set A/D data flow result=40 00:02:03 Set A/D channel type result=40 00:02:03 Set A/D encoding result=40 00:02:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:03 Set channel filter=0.000000e+000 result=40 00:02:03 Config A/D Result=40 00:02:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:03 Get A/D filter: -9.255963e+061 result=40 00:02:03 Get A/D value=-858993460 result=40 00:02:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:02:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:02:03 Aux= 00:02:03 Message to Camera, serial 98179 queued 00:02:40 Received message from Master: op=PointingHead serial=98192 00:02:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:02:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:02:41 Point started: ret=0 00:02:41 point_skyscan result=0 00:02:41 Check angles 00:02:41 SkyScan query 00:02:42 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.015<-17401 Statuses=0009 0009 00:02:42 Msec=0 True Az=108.795 Ze=-81.015 Az status=0009 Ze status=0009 00:02:42 Check angles 00:02:42 SkyScan query 00:02:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-101.985<-18799 Statuses=0008 0009 00:02:43 Msec=750 True Az=113.01 Ze=-101.985 Az status=0008 Ze status=0009 00:02:43 Check angles 00:02:43 SkyScan query 00:02:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-122.94<-20196 Statuses=0008 0009 00:02:43 Msec=1500 True Az=113.01 Ze=-122.94 Az status=0008 Ze status=0009 00:02:44 Check angles 00:02:44 SkyScan query 00:02:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.88<-21592 Statuses=0008 0009 00:02:44 Msec=2250 True Az=112.995 Ze=-143.88 Az status=0008 Ze status=0009 00:02:44 Check angles 00:02:44 SkyScan query 00:02:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.835<-22989 Statuses=0008 0009 00:02:45 Msec=3000 True Az=112.995 Ze=-164.835 Az status=0008 Ze status=0009 00:02:45 Check angles 00:02:45 SkyScan query 00:02:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:02:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:02:46 Message to Master queued w/err=0: serial=98192 error=0 00:02:51 Received message from Master: op=Filter serial=98193 00:02:51 Color wheel filter change from 0 to 0 00:02:51 FLIGetFilterPos err=0 currentPosition=0 00:02:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:02:51 Filter is already there-color wheel unchanged 00:02:51 Received message from Master: op=Shutter serial=98194 00:02:51 Shutter LASER open 00:02:51 Received message from Camera: op=State serial=98196 00:02:51 GetSingleValue result=40 Value=cccccccc 00:02:51 SkyScan query 00:02:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:02:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:52 Parameters OK 00:02:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:52 Set A/D data flow result=40 00:02:52 Set A/D channel type result=40 00:02:52 Set A/D encoding result=40 00:02:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:52 Set channel filter=0.000000e+000 result=40 00:02:52 Config A/D Result=40 00:02:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:52 Get A/D filter: -9.255963e+061 result=40 00:02:52 Get A/D value=-858993460 result=40 00:02:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:52 Parameters OK 00:02:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:52 Set A/D data flow result=40 00:02:52 Set A/D channel type result=40 00:02:52 Set A/D encoding result=40 00:02:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:52 Set channel filter=0.000000e+000 result=40 00:02:52 Config A/D Result=40 00:02:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:52 Get A/D filter: -9.255963e+061 result=40 00:02:52 Get A/D value=-858993460 result=40 00:02:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:02:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:02:52 Aux= 00:02:52 Message to Camera, serial 98196 queued 00:03:00 Received message from Master: op=Shutter serial=98206 00:03:00 Shutter LASER close 00:03:00 Received message from Master: op=PointingHead serial=98210 00:03:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:03:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:03:01 Point started: ret=0 00:03:01 point_skyscan result=0 00:03:02 Check angles 00:03:02 SkyScan query 00:03:02 SkyScan query done: ret=0 az=90.03<-6002 ze=157.38<-1508 Statuses=0009 0009 00:03:02 Msec=0 True Az=90.03 Ze=157.38 Az status=0009 Ze status=0009 00:03:02 Check angles 00:03:02 SkyScan query 00:03:03 SkyScan query done: ret=0 az=72.075<-4805 ze=135.99<-2934 Statuses=0009 0009 00:03:03 Msec=750 True Az=72.075 Ze=135.99 Az status=0009 Ze status=0009 00:03:03 Check angles 00:03:03 SkyScan query 00:03:04 SkyScan query done: ret=0 az=54.84<-3656 ze=115.065<-4329 Statuses=0009 0009 00:03:04 Msec=1500 True Az=54.84 Ze=115.065 Az status=0009 Ze status=0009 00:03:04 Check angles 00:03:04 SkyScan query 00:03:04 SkyScan query done: ret=0 az=40.875<-2725 ze=94.08<-5728 Statuses=0009 0009 00:03:04 Msec=2250 True Az=40.875 Ze=94.08 Az status=0009 Ze status=0009 00:03:05 Check angles 00:03:05 SkyScan query 00:03:05 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 00:03:05 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 00:03:05 Check angles 00:03:05 SkyScan query 00:03:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 00:03:06 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 00:03:06 Check angles 00:03:06 SkyScan query 00:03:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:03:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:03:07 Message to Master queued w/err=0: serial=98210 error=0 00:03:12 Received message from Master: op=Filter serial=98211 00:03:12 Color wheel filter change from 0 to 0 00:03:12 FLIGetFilterPos err=0 currentPosition=0 00:03:12 FLIGetStepsRemaining err=0 RemainingSteps=0 00:03:12 Filter is already there-color wheel unchanged 00:03:12 Received message from Master: op=Shutter serial=98212 00:03:12 Shutter LASER close 00:03:12 Received message from Camera: op=State serial=98214 00:03:12 GetSingleValue result=40 Value=cccccccc 00:03:12 SkyScan query 00:03:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:03:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:13 Parameters OK 00:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:13 Set A/D data flow result=40 00:03:13 Set A/D channel type result=40 00:03:13 Set A/D encoding result=40 00:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:13 Set channel filter=0.000000e+000 result=40 00:03:13 Config A/D Result=40 00:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:13 Get A/D filter: -9.255963e+061 result=40 00:03:13 Get A/D value=-858993460 result=40 00:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:13 Parameters OK 00:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:13 Set A/D data flow result=40 00:03:13 Set A/D channel type result=40 00:03:13 Set A/D encoding result=40 00:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:13 Set channel filter=0.000000e+000 result=40 00:03:13 Config A/D Result=40 00:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:13 Get A/D filter: -9.255963e+061 result=40 00:03:13 Get A/D value=-858993460 result=40 00:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:03:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:03:13 Aux= 00:03:13 Message to Camera, serial 98214 queued 00:03:49 Received message from Master: op=PointingHead serial=98226 00:03:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:03:49 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:03:49 Point started: ret=0 00:03:49 point_skyscan result=0 00:03:50 Check angles 00:03:50 SkyScan query 00:03:50 SkyScan query done: ret=0 az=40.995<-2733 ze=21.525<-10565 Statuses=0008 0009 00:03:50 Msec=0 True Az=40.995 Ze=21.525 Az status=0008 Ze status=0009 00:03:51 Check angles 00:03:51 SkyScan query 00:03:51 SkyScan query done: ret=0 az=40.995<-2733 ze=0.555<-11963 Statuses=0008 0009 00:03:51 Msec=750 True Az=40.995 Ze=0.555 Az status=0008 Ze status=0009 00:03:51 Check angles 00:03:51 SkyScan query 00:03:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.415<-13361 Statuses=0008 0009 00:03:52 Msec=1500 True Az=40.995 Ze=-20.415 Az status=0008 Ze status=0009 00:03:52 Check angles 00:03:52 SkyScan query 00:03:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 00:03:53 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 00:03:53 Check angles 00:03:53 SkyScan query 00:03:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:03:53 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:03:53 Message to Master queued w/err=0: serial=98226 error=0 00:03:58 Received message from Master: op=Filter serial=98227 00:03:58 Color wheel filter change from 0 to 0 00:03:58 FLIGetFilterPos err=0 currentPosition=0 00:03:58 FLIGetStepsRemaining err=0 RemainingSteps=0 00:03:58 Filter is already there-color wheel unchanged 00:03:59 Received message from Master: op=Shutter serial=98228 00:03:59 Shutter LASER close 00:03:59 Received message from Camera: op=State serial=98230 00:03:59 GetSingleValue result=40 Value=cccccccc 00:03:59 SkyScan query 00:03:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:03:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:59 Parameters OK 00:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:59 Set A/D data flow result=40 00:03:59 Set A/D channel type result=40 00:03:59 Set A/D encoding result=40 00:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:59 Set channel filter=0.000000e+000 result=40 00:03:59 Config A/D Result=40 00:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:59 Get A/D filter: -9.255963e+061 result=40 00:03:59 Get A/D value=-858993460 result=40 00:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:59 Parameters OK 00:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:59 Set A/D data flow result=40 00:03:59 Set A/D channel type result=40 00:03:59 Set A/D encoding result=40 00:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:59 Set channel filter=0.000000e+000 result=40 00:03:59 Config A/D Result=40 00:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:59 Get A/D filter: -9.255963e+061 result=40 00:03:59 Get A/D value=-858993460 result=40 00:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:03:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:03:59 Aux= 00:03:59 Message to Camera, serial 98230 queued 00:04:36 Received message from Master: op=PointingHead serial=98243 00:04:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:04:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:04:36 Point started: ret=0 00:04:36 point_skyscan result=0 00:04:37 Check angles 00:04:37 SkyScan query 00:04:38 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.52<-16568 Statuses=0009 0009 00:04:38 Msec=0 True Az=64.05 Ze=-68.52 Az status=0009 Ze status=0009 00:04:38 Check angles 00:04:38 SkyScan query 00:04:38 SkyScan query done: ret=0 az=82.11<-5474 ze=-89.88<-17992 Statuses=0009 0009 00:04:38 Msec=750 True Az=82.11 Ze=-89.88 Az status=0009 Ze status=0009 00:04:39 Check angles 00:04:39 SkyScan query 00:04:39 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.85<-19390 Statuses=0009 0009 00:04:39 Msec=1500 True Az=99.54 Ze=-110.85 Az status=0009 Ze status=0009 00:04:39 Check angles 00:04:39 SkyScan query 00:04:40 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.805<-20787 Statuses=0009 0009 00:04:40 Msec=2250 True Az=117.045 Ze=-131.805 Az status=0009 Ze status=0009 00:04:40 Check angles 00:04:40 SkyScan query 00:04:41 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 00:04:41 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 00:04:41 Check angles 00:04:41 SkyScan query 00:04:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:04:41 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:04:41 Message to Master queued w/err=0: serial=98243 error=0 00:04:46 Received message from Master: op=Filter serial=98244 00:04:46 Color wheel filter change from 0 to 0 00:04:46 FLIGetFilterPos err=0 currentPosition=0 00:04:46 FLIGetStepsRemaining err=0 RemainingSteps=0 00:04:46 Filter is already there-color wheel unchanged 00:04:47 Received message from Master: op=Shutter serial=98245 00:04:47 Shutter LASER close 00:04:47 Received message from Camera: op=State serial=98247 00:04:47 GetSingleValue result=40 Value=cccccccc 00:04:47 SkyScan query 00:04:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:04:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:47 Parameters OK 00:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:47 Set A/D data flow result=40 00:04:47 Set A/D channel type result=40 00:04:47 Set A/D encoding result=40 00:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:47 Set channel filter=0.000000e+000 result=40 00:04:47 Config A/D Result=40 00:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:47 Get A/D filter: -9.255963e+061 result=40 00:04:47 Get A/D value=-858993460 result=40 00:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:47 Parameters OK 00:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:47 Set A/D data flow result=40 00:04:47 Set A/D channel type result=40 00:04:47 Set A/D encoding result=40 00:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:47 Set channel filter=0.000000e+000 result=40 00:04:47 Config A/D Result=40 00:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:47 Get A/D filter: -9.255963e+061 result=40 00:04:47 Get A/D value=-858993460 result=40 00:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:04:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:04:47 Aux= 00:04:47 Message to Camera, serial 98247 queued 00:05:24 Received message from Master: op=PointingHead serial=98260 00:05:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:05:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:05:24 Point started: ret=0 00:05:24 point_skyscan result=0 00:05:25 Check angles 00:05:25 SkyScan query 00:05:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 00:05:26 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 00:05:26 Check angles 00:05:26 SkyScan query 00:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:05:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:05:26 Message to Master queued w/err=0: serial=98260 error=0 00:05:31 Received message from Master: op=Filter serial=98261 00:05:31 Color wheel filter change from 0 to 0 00:05:31 FLIGetFilterPos err=0 currentPosition=0 00:05:31 FLIGetStepsRemaining err=0 RemainingSteps=0 00:05:31 Filter is already there-color wheel unchanged 00:05:32 Received message from Master: op=Shutter serial=98262 00:05:32 Shutter LASER open 00:05:32 Received message from Camera: op=State serial=98264 00:05:32 GetSingleValue result=40 Value=cccccccc 00:05:32 SkyScan query 00:05:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:05:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:32 Parameters OK 00:05:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:32 Set A/D data flow result=40 00:05:32 Set A/D channel type result=40 00:05:32 Set A/D encoding result=40 00:05:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:32 Set channel filter=0.000000e+000 result=40 00:05:32 Config A/D Result=40 00:05:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:32 Get A/D filter: -9.255963e+061 result=40 00:05:32 Get A/D value=-858993460 result=40 00:05:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:32 Parameters OK 00:05:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:32 Set A/D data flow result=40 00:05:32 Set A/D channel type result=40 00:05:32 Set A/D encoding result=40 00:05:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:32 Set channel filter=0.000000e+000 result=40 00:05:32 Config A/D Result=40 00:05:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:32 Get A/D filter: -9.255963e+061 result=40 00:05:32 Get A/D value=-858993460 result=40 00:05:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:05:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:05:32 Aux= 00:05:32 Message to Camera, serial 98264 queued 00:05:41 Received message from Master: op=Shutter serial=98274 00:05:41 Shutter LASER close 00:05:41 Received message from Master: op=PointingHead serial=98278 00:05:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:05:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:05:42 Point started: ret=0 00:05:42 point_skyscan result=0 00:05:42 Check angles 00:05:42 SkyScan query 00:05:43 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.46<-21564 Statuses=0009 0009 00:05:43 Msec=0 True Az=135.765 Ze=-143.46 Az status=0009 Ze status=0009 00:05:43 Check angles 00:05:43 SkyScan query 00:05:44 SkyScan query done: ret=0 az=153.255<-10217 ze=-122.49<-20166 Statuses=0009 0009 00:05:44 Msec=750 True Az=153.255 Ze=-122.49 Az status=0009 Ze status=0009 00:05:44 Check angles 00:05:44 SkyScan query 00:05:45 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.13<-18742 Statuses=0009 0009 00:05:45 Msec=1500 True Az=171.09 Ze=-101.13 Az status=0009 Ze status=0009 00:05:45 Check angles 00:05:45 SkyScan query 00:05:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.19<-17346 Statuses=0008 0009 00:05:45 Msec=2250 True Az=176.01 Ze=-80.19 Az status=0008 Ze status=0009 00:05:45 Check angles 00:05:45 SkyScan query 00:05:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 00:05:46 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 00:05:46 Check angles 00:05:46 SkyScan query 00:05:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:05:47 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:05:47 Message to Master queued w/err=0: serial=98278 error=0 00:05:52 Received message from Master: op=Filter serial=98279 00:05:52 Color wheel filter change from 0 to 0 00:05:52 FLIGetFilterPos err=0 currentPosition=0 00:05:52 FLIGetStepsRemaining err=0 RemainingSteps=0 00:05:52 Filter is already there-color wheel unchanged 00:05:52 Received message from Master: op=Shutter serial=98280 00:05:52 Shutter LASER close 00:05:52 Received message from Camera: op=State serial=98282 00:05:52 GetSingleValue result=40 Value=cccccccc 00:05:52 SkyScan query 00:05:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:05:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:53 Parameters OK 00:05:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:53 Set A/D data flow result=40 00:05:53 Set A/D channel type result=40 00:05:53 Set A/D encoding result=40 00:05:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:53 Set channel filter=0.000000e+000 result=40 00:05:53 Config A/D Result=40 00:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:53 Get A/D filter: -9.255963e+061 result=40 00:05:53 Get A/D value=-858993460 result=40 00:05:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:53 Parameters OK 00:05:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:53 Set A/D data flow result=40 00:05:53 Set A/D channel type result=40 00:05:53 Set A/D encoding result=40 00:05:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:53 Set channel filter=0.000000e+000 result=40 00:05:53 Config A/D Result=40 00:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:53 Get A/D filter: -9.255963e+061 result=40 00:05:53 Get A/D value=-858993460 result=40 00:05:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:05:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:05:53 Aux= 00:05:53 Message to Camera, serial 98282 queued 00:06:30 Received message from Master: op=PointingHead serial=98295 00:06:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:06:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:06:30 Point started: ret=0 00:06:30 point_skyscan result=0 00:06:31 Check angles 00:06:31 SkyScan query 00:06:31 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.825<-13455 Statuses=0009 0009 00:06:31 Msec=0 True Az=153.12 Ze=-21.825 Az status=0009 Ze status=0009 00:06:31 Check angles 00:06:31 SkyScan query 00:06:32 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.495<-12033 Statuses=0009 0009 00:06:32 Msec=750 True Az=135.345 Ze=-0.495 Az status=0009 Ze status=0009 00:06:32 Check angles 00:06:32 SkyScan query 00:06:33 SkyScan query done: ret=0 az=117.36<-7824 ze=20.865<-10609 Statuses=0009 0009 00:06:33 Msec=1500 True Az=117.36 Ze=20.865 Az status=0009 Ze status=0009 00:06:33 Check angles 00:06:33 SkyScan query 00:06:34 SkyScan query done: ret=0 az=99.96<-6664 ze=41.85<-9210 Statuses=0009 0009 00:06:34 Msec=2250 True Az=99.96 Ze=41.85 Az status=0009 Ze status=0009 00:06:34 Check angles 00:06:34 SkyScan query 00:06:34 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 00:06:34 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 00:06:34 Check angles 00:06:34 SkyScan query 00:06:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:06:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:06:35 Message to Master queued w/err=0: serial=98295 error=0 00:06:40 Received message from Master: op=Filter serial=98296 00:06:40 Color wheel filter change from 0 to 0 00:06:40 FLIGetFilterPos err=0 currentPosition=0 00:06:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:06:40 Filter is already there-color wheel unchanged 00:06:40 Received message from Master: op=Shutter serial=98297 00:06:40 Shutter LASER close 00:06:40 Received message from Camera: op=State serial=98299 00:06:40 GetSingleValue result=40 Value=cccccccc 00:06:40 SkyScan query 00:06:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:06:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:41 Parameters OK 00:06:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:41 Set A/D data flow result=40 00:06:41 Set A/D channel type result=40 00:06:41 Set A/D encoding result=40 00:06:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:41 Set channel filter=0.000000e+000 result=40 00:06:41 Config A/D Result=40 00:06:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:41 Get A/D filter: -9.255963e+061 result=40 00:06:41 Get A/D value=-858993460 result=40 00:06:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:41 Parameters OK 00:06:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:41 Set A/D data flow result=40 00:06:41 Set A/D channel type result=40 00:06:41 Set A/D encoding result=40 00:06:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:41 Set channel filter=0.000000e+000 result=40 00:06:41 Config A/D Result=40 00:06:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:41 Get A/D filter: -9.255963e+061 result=40 00:06:41 Get A/D value=-858993460 result=40 00:06:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:06:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:06:41 Aux= 00:06:41 Message to Camera, serial 98299 queued 00:07:18 Received message from Master: op=PointingHead serial=98312 00:07:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:07:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:07:18 Point started: ret=0 00:07:18 point_skyscan result=0 00:07:19 Check angles 00:07:19 SkyScan query 00:07:19 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 00:07:19 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 00:07:19 Check angles 00:07:19 SkyScan query 00:07:20 SkyScan query done: ret=0 az=126.45<-8430 ze=38.505<-9433 Statuses=0009 0008 00:07:20 Msec=750 True Az=126.45 Ze=38.505 Az status=0009 Ze status=0008 00:07:20 Check angles 00:07:20 SkyScan query 00:07:21 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 00:07:21 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 00:07:21 Check angles 00:07:21 SkyScan query 00:07:22 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 [UTC 2018-12-13 00:07:22] 00:07:22 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 00:07:22 Check angles 00:07:22 SkyScan query 00:07:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:07:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:07:23 Check angles 00:07:23 SkyScan query 00:07:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:07:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:07:23 Message to Master queued w/err=0: serial=98312 error=0 00:07:28 Received message from Master: op=Filter serial=98313 00:07:28 Color wheel filter change from 0 to 0 00:07:28 FLIGetFilterPos err=0 currentPosition=0 00:07:28 FLIGetStepsRemaining err=0 RemainingSteps=0 00:07:28 Filter is already there-color wheel unchanged 00:07:28 Received message from Master: op=Shutter serial=98314 00:07:28 Shutter LASER close 00:07:28 Received message from Camera: op=State serial=98316 00:07:28 GetSingleValue result=40 Value=cccccccc 00:07:28 SkyScan query 00:07:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:07:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:29 Parameters OK 00:07:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:29 Set A/D data flow result=40 00:07:29 Set A/D channel type result=40 00:07:29 Set A/D encoding result=40 00:07:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:29 Set channel filter=0.000000e+000 result=40 00:07:29 Config A/D Result=40 00:07:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:29 Get A/D filter: -9.255963e+061 result=40 00:07:29 Get A/D value=-858993460 result=40 00:07:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:29 Parameters OK 00:07:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:29 Set A/D data flow result=40 00:07:29 Set A/D channel type result=40 00:07:29 Set A/D encoding result=40 00:07:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:29 Set channel filter=0.000000e+000 result=40 00:07:29 Config A/D Result=40 00:07:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:29 Get A/D filter: -9.255963e+061 result=40 00:07:29 Get A/D value=-858993460 result=40 00:07:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:07:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:07:29 Aux= 00:07:29 Message to Camera, serial 98316 queued 00:08:06 Received message from Master: op=PointingHead serial=98329 00:08:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:08:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:08:06 Point started: ret=0 00:08:06 point_skyscan result=0 00:08:07 Check angles 00:08:07 SkyScan query 00:08:08 SkyScan query done: ret=0 az=152.67<-10178 ze=8.265<-11449 Statuses=0009 0009 00:08:08 Msec=0 True Az=152.67 Ze=8.265 Az status=0009 Ze status=0009 00:08:08 Check angles 00:08:08 SkyScan query 00:08:08 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.72<-12848 Statuses=0009 0009 00:08:08 Msec=750 True Az=135.135 Ze=-12.72 Az status=0009 Ze status=0009 00:08:08 Check angles 00:08:08 SkyScan query 00:08:09 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.63<-14242 Statuses=0009 0009 00:08:09 Msec=1500 True Az=117.6 Ze=-33.63 Az status=0009 Ze status=0009 00:08:09 Check angles 00:08:09 SkyScan query 00:08:10 SkyScan query done: ret=0 az=100.305<-6687 ze=-51.555<-15437 Statuses=0009 0009 00:08:10 Msec=2250 True Az=100.305 Ze=-51.555 Az status=0009 Ze status=0009 00:08:10 Check angles 00:08:10 SkyScan query 00:08:11 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 00:08:11 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 00:08:11 Check angles 00:08:11 SkyScan query 00:08:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:08:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:08:11 Message to Master queued w/err=0: serial=98329 error=0 00:08:16 Received message from Master: op=Filter serial=98330 00:08:16 Color wheel filter change from 0 to 0 00:08:16 FLIGetFilterPos err=0 currentPosition=0 00:08:16 FLIGetStepsRemaining err=0 RemainingSteps=0 00:08:16 Filter is already there-color wheel unchanged 00:08:16 Received message from Master: op=Shutter serial=98331 00:08:16 Shutter LASER close 00:08:16 Received message from Camera: op=State serial=98333 00:08:16 GetSingleValue result=40 Value=cccccccc 00:08:16 SkyScan query 00:08:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:08:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:17 Parameters OK 00:08:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:17 Set A/D data flow result=40 00:08:17 Set A/D channel type result=40 00:08:17 Set A/D encoding result=40 00:08:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:17 Set channel filter=0.000000e+000 result=40 00:08:17 Config A/D Result=40 00:08:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:17 Get A/D filter: -9.255963e+061 result=40 00:08:17 Get A/D value=-858993460 result=40 00:08:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:17 Parameters OK 00:08:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:17 Set A/D data flow result=40 00:08:17 Set A/D channel type result=40 00:08:17 Set A/D encoding result=40 00:08:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:17 Set channel filter=0.000000e+000 result=40 00:08:17 Config A/D Result=40 00:08:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:17 Get A/D filter: -9.255963e+061 result=40 00:08:17 Get A/D value=-858993460 result=40 00:08:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:08:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:08:17 Aux= 00:08:17 Message to Camera, serial 98333 queued 00:08:54 Received message from Master: op=PointingHead serial=98346 00:08:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:08:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:08:54 Point started: ret=0 00:08:54 point_skyscan result=0 00:08:55 Check angles 00:08:55 SkyScan query 00:08:56 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.03<-17402 Statuses=0009 0009 00:08:56 Msec=0 True Az=108.9 Ze=-81.03 Az status=0009 Ze status=0009 00:08:56 Check angles 00:08:56 SkyScan query 00:08:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 00:08:56 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 00:08:56 Check angles 00:08:56 SkyScan query 00:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 00:08:57 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 00:08:57 Check angles 00:08:57 SkyScan query 00:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 00:08:58 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 00:08:58 Check angles 00:08:58 SkyScan query 00:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 00:08:59 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 00:08:59 Check angles 00:08:59 SkyScan query 00:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:08:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:08:59 Message to Master queued w/err=0: serial=98346 error=0 00:09:04 Received message from Master: op=Filter serial=98347 00:09:04 Color wheel filter change from 0 to 0 00:09:04 FLIGetFilterPos err=0 currentPosition=0 00:09:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:09:04 Filter is already there-color wheel unchanged 00:09:04 Received message from Master: op=Shutter serial=98348 00:09:04 Shutter LASER open 00:09:05 Received message from Camera: op=State serial=98350 00:09:05 GetSingleValue result=40 Value=cccccccc 00:09:05 SkyScan query 00:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:09:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:05 Parameters OK 00:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:05 Set A/D data flow result=40 00:09:05 Set A/D channel type result=40 00:09:05 Set A/D encoding result=40 00:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:05 Set channel filter=0.000000e+000 result=40 00:09:05 Config A/D Result=40 00:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:05 Get A/D filter: -9.255963e+061 result=40 00:09:05 Get A/D value=-858993460 result=40 00:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:05 Parameters OK 00:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:05 Set A/D data flow result=40 00:09:05 Set A/D channel type result=40 00:09:05 Set A/D encoding result=40 00:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:05 Set channel filter=0.000000e+000 result=40 00:09:05 Config A/D Result=40 00:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:05 Get A/D filter: -9.255963e+061 result=40 00:09:05 Get A/D value=-858993460 result=40 00:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:09:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:09:05 Aux= 00:09:05 Message to Camera, serial 98350 queued 00:09:14 Received message from Master: op=Shutter serial=98360 00:09:14 Shutter LASER close 00:09:14 Received message from Master: op=PointingHead serial=98364 00:09:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:09:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:09:14 Point started: ret=0 00:09:14 point_skyscan result=0 00:09:15 Check angles 00:09:15 SkyScan query 00:09:16 SkyScan query done: ret=0 az=89.655<-5977 ze=157.05<-1530 Statuses=0009 0009 00:09:16 Msec=0 True Az=89.655 Ze=157.05 Az status=0009 Ze status=0009 00:09:16 Check angles 00:09:16 SkyScan query 00:09:17 SkyScan query done: ret=0 az=72.3<-4820 ze=136.05<-2930 Statuses=0009 0009 00:09:17 Msec=750 True Az=72.3 Ze=136.05 Az status=0009 Ze status=0009 00:09:17 Check angles 00:09:17 SkyScan query 00:09:17 SkyScan query done: ret=0 az=54.645<-3643 ze=114.705<-4353 Statuses=0009 0009 00:09:17 Msec=1500 True Az=54.645 Ze=114.705 Az status=0009 Ze status=0009 00:09:17 Check angles 00:09:17 SkyScan query 00:09:18 SkyScan query done: ret=0 az=40.92<-2728 ze=93.735<-5751 Statuses=0009 0009 00:09:18 Msec=2250 True Az=40.92 Ze=93.735 Az status=0009 Ze status=0009 00:09:18 Check angles 00:09:18 SkyScan query 00:09:19 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 00:09:19 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 00:09:19 Check angles 00:09:19 SkyScan query 00:09:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 00:09:20 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 00:09:20 Check angles 00:09:20 SkyScan query 00:09:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:09:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:09:20 Message to Master queued w/err=0: serial=98364 error=0 00:09:25 Received message from Master: op=Filter serial=98365 00:09:25 Color wheel filter change from 0 to 0 00:09:25 FLIGetFilterPos err=0 currentPosition=0 00:09:25 FLIGetStepsRemaining err=0 RemainingSteps=0 00:09:25 Filter is already there-color wheel unchanged 00:09:25 Received message from Master: op=Shutter serial=98366 00:09:25 Shutter LASER close 00:09:26 Received message from Camera: op=State serial=98368 00:09:26 GetSingleValue result=40 Value=cccccccc 00:09:26 SkyScan query 00:09:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:09:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:26 Parameters OK 00:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:26 Set A/D data flow result=40 00:09:26 Set A/D channel type result=40 00:09:26 Set A/D encoding result=40 00:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:26 Set channel filter=0.000000e+000 result=40 00:09:26 Config A/D Result=40 00:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:26 Get A/D filter: -9.255963e+061 result=40 00:09:26 Get A/D value=-858993460 result=40 00:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:26 Parameters OK 00:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:26 Set A/D data flow result=40 00:09:26 Set A/D channel type result=40 00:09:26 Set A/D encoding result=40 00:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:26 Set channel filter=0.000000e+000 result=40 00:09:26 Config A/D Result=40 00:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:26 Get A/D filter: -9.255963e+061 result=40 00:09:26 Get A/D value=-858993460 result=40 00:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:09:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:09:26 Aux= 00:09:26 Message to Camera, serial 98368 queued 00:10:03 Received message from Master: op=PointingHead serial=98381 00:10:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:10:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:10:04 Point started: ret=0 00:10:04 point_skyscan result=0 00:10:04 Check angles 00:10:04 SkyScan query 00:10:05 SkyScan query done: ret=0 az=40.995<-2733 ze=21.78<-10548 Statuses=0008 0009 00:10:05 Msec=0 True Az=40.995 Ze=21.78 Az status=0008 Ze status=0009 00:10:05 Check angles 00:10:05 SkyScan query 00:10:06 SkyScan query done: ret=0 az=40.995<-2733 ze=0.78<-11948 Statuses=0008 0009 00:10:06 Msec=750 True Az=40.995 Ze=0.78 Az status=0008 Ze status=0009 00:10:06 Check angles 00:10:06 SkyScan query 00:10:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.16<-13344 Statuses=0008 0009 00:10:06 Msec=1500 True Az=40.995 Ze=-20.16 Az status=0008 Ze status=0009 00:10:07 Check angles 00:10:07 SkyScan query 00:10:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 00:10:07 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 00:10:07 Check angles 00:10:07 SkyScan query 00:10:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:10:08 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:10:08 Message to Master queued w/err=0: serial=98381 error=0 00:10:13 Received message from Master: op=Filter serial=98382 00:10:13 Color wheel filter change from 0 to 0 00:10:13 FLIGetFilterPos err=0 currentPosition=0 00:10:13 FLIGetStepsRemaining err=0 RemainingSteps=0 00:10:13 Filter is already there-color wheel unchanged 00:10:13 Received message from Master: op=Shutter serial=98383 00:10:13 Shutter LASER close 00:10:13 Received message from Camera: op=State serial=98385 00:10:13 GetSingleValue result=40 Value=cccccccc 00:10:13 SkyScan query 00:10:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:10:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:14 Parameters OK 00:10:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:14 Set A/D data flow result=40 00:10:14 Set A/D channel type result=40 00:10:14 Set A/D encoding result=40 00:10:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:14 Set channel filter=0.000000e+000 result=40 00:10:14 Config A/D Result=40 00:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:14 Get A/D filter: -9.255963e+061 result=40 00:10:14 Get A/D value=-858993460 result=40 00:10:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:14 Parameters OK 00:10:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:14 Set A/D data flow result=40 00:10:14 Set A/D channel type result=40 00:10:14 Set A/D encoding result=40 00:10:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:14 Set channel filter=0.000000e+000 result=40 00:10:14 Config A/D Result=40 00:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:14 Get A/D filter: -9.255963e+061 result=40 00:10:14 Get A/D value=-858993460 result=40 00:10:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:10:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:10:14 Aux= 00:10:14 Message to Camera, serial 98385 queued 00:10:51 Received message from Master: op=PointingHead serial=98398 00:10:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:10:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:10:51 Point started: ret=0 00:10:51 point_skyscan result=0 00:10:52 Check angles 00:10:52 SkyScan query 00:10:52 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.25<-16550 Statuses=0009 0009 00:10:52 Msec=0 True Az=63.78 Ze=-68.25 Az status=0009 Ze status=0009 00:10:52 Check angles 00:10:52 SkyScan query 00:10:53 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.19<-17946 Statuses=0009 0009 00:10:53 Msec=750 True Az=81.435 Ze=-89.19 Az status=0009 Ze status=0009 00:10:53 Check angles 00:10:53 SkyScan query 00:10:54 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.145<-19343 Statuses=0009 0009 00:10:54 Msec=1500 True Az=98.865 Ze=-110.145 Az status=0009 Ze status=0009 00:10:54 Check angles 00:10:54 SkyScan query 00:10:54 SkyScan query done: ret=0 az=116.25<-7750 ze=-131.07<-20738 Statuses=0009 0009 00:10:54 Msec=2250 True Az=116.25 Ze=-131.07 Az status=0009 Ze status=0009 00:10:55 Check angles 00:10:55 SkyScan query 00:10:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 00:10:55 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 00:10:55 Check angles 00:10:55 SkyScan query 00:10:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:10:56 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:10:56 Message to Master queued w/err=0: serial=98398 error=0 00:11:01 Received message from Master: op=Filter serial=98399 00:11:01 Color wheel filter change from 0 to 0 00:11:01 FLIGetFilterPos err=0 currentPosition=0 00:11:01 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:01 Filter is already there-color wheel unchanged 00:11:01 Received message from Master: op=Shutter serial=98400 00:11:01 Shutter LASER close 00:11:01 Received message from Camera: op=State serial=98402 00:11:01 GetSingleValue result=40 Value=cccccccc 00:11:01 SkyScan query 00:11:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:11:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:02 Parameters OK 00:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:02 Set A/D data flow result=40 00:11:02 Set A/D channel type result=40 00:11:02 Set A/D encoding result=40 00:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:02 Set channel filter=0.000000e+000 result=40 00:11:02 Config A/D Result=40 00:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:02 Get A/D filter: -9.255963e+061 result=40 00:11:02 Get A/D value=-858993460 result=40 00:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:02 Parameters OK 00:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:02 Set A/D data flow result=40 00:11:02 Set A/D channel type result=40 00:11:02 Set A/D encoding result=40 00:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:02 Set channel filter=0.000000e+000 result=40 00:11:02 Config A/D Result=40 00:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:02 Get A/D filter: -9.255963e+061 result=40 00:11:02 Get A/D value=-858993460 result=40 00:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:02 Aux= 00:11:02 Message to Camera, serial 98402 queued 00:11:39 Received message from Master: op=PointingHead serial=98415 00:11:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:11:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:11:39 Point started: ret=0 00:11:39 point_skyscan result=0 00:11:40 Check angles 00:11:40 SkyScan query 00:11:40 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 00:11:40 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 00:11:40 Check angles 00:11:40 SkyScan query 00:11:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:11:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:11:41 Message to Master queued w/err=0: serial=98415 error=0 00:11:46 Received message from Master: op=Filter serial=98416 00:11:46 Color wheel filter change from 0 to 0 00:11:46 FLIGetFilterPos err=0 currentPosition=0 00:11:46 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:46 Filter is already there-color wheel unchanged 00:11:46 Received message from Master: op=Shutter serial=98417 00:11:46 Shutter LASER open 00:11:46 Received message from Camera: op=State serial=98419 00:11:46 GetSingleValue result=40 Value=cccccccc 00:11:46 SkyScan query 00:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:11:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:47 Parameters OK 00:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:47 Set A/D data flow result=40 00:11:47 Set A/D channel type result=40 00:11:47 Set A/D encoding result=40 00:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:47 Set channel filter=0.000000e+000 result=40 00:11:47 Config A/D Result=40 00:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:47 Get A/D filter: -9.255963e+061 result=40 00:11:47 Get A/D value=-858993460 result=40 00:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:47 Parameters OK 00:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:47 Set A/D data flow result=40 00:11:47 Set A/D channel type result=40 00:11:47 Set A/D encoding result=40 00:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:47 Set channel filter=0.000000e+000 result=40 00:11:47 Config A/D Result=40 00:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:47 Get A/D filter: -9.255963e+061 result=40 00:11:47 Get A/D value=-858993460 result=40 00:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:47 Aux= 00:11:47 Message to Camera, serial 98419 queued 00:11:54 Received message from Master: op=Shutter serial=98428 00:11:54 Shutter LASER close 00:11:55 Received message from Master: op=PointingHead serial=98432 00:11:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:11:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:11:55 Point started: ret=0 00:11:55 point_skyscan result=0 00:11:56 Check angles 00:11:56 SkyScan query 00:11:57 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.875<-21525 Statuses=0009 0009 00:11:57 Msec=0 True Az=136.38 Ze=-142.875 Az status=0009 Ze status=0009 00:11:57 Check angles 00:11:57 SkyScan query 00:11:57 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.89<-20126 Statuses=0009 0009 00:11:57 Msec=750 True Az=153.81 Ze=-121.89 Az status=0009 Ze status=0009 00:11:58 Check angles 00:11:58 SkyScan query 00:11:58 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.01<-18734 Statuses=0009 0009 00:11:58 Msec=1500 True Az=171.24 Ze=-101.01 Az status=0009 Ze status=0009 00:11:58 Check angles 00:11:58 SkyScan query 00:11:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.59<-17306 Statuses=0008 0009 00:11:59 Msec=2250 True Az=176.01 Ze=-79.59 Az status=0008 Ze status=0009 00:11:59 Check angles 00:11:59 SkyScan query 00:12:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.605<-15907 Statuses=0008 0009 00:12:00 Msec=3000 True Az=176.01 Ze=-58.605 Az status=0008 Ze status=0009 00:12:00 Check angles 00:12:00 SkyScan query 00:12:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:12:00 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:12:00 Message to Master queued w/err=0: serial=98432 error=0 00:12:05 Received message from Master: op=Filter serial=98433 00:12:05 Color wheel filter change from 0 to 0 00:12:05 FLIGetFilterPos err=0 currentPosition=0 00:12:05 FLIGetStepsRemaining err=0 RemainingSteps=0 00:12:05 Filter is already there-color wheel unchanged 00:12:06 Received message from Master: op=Shutter serial=98434 00:12:06 Shutter LASER close 00:12:06 Received message from Camera: op=State serial=98436 00:12:06 GetSingleValue result=40 Value=cccccccc 00:12:06 SkyScan query 00:12:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:12:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:06 Parameters OK 00:12:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:06 Set A/D data flow result=40 00:12:06 Set A/D channel type result=40 00:12:06 Set A/D encoding result=40 00:12:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:06 Set channel filter=0.000000e+000 result=40 00:12:06 Config A/D Result=40 00:12:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:06 Get A/D filter: -9.255963e+061 result=40 00:12:06 Get A/D value=-858993460 result=40 00:12:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:06 Parameters OK 00:12:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:06 Set A/D data flow result=40 00:12:06 Set A/D channel type result=40 00:12:06 Set A/D encoding result=40 00:12:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:06 Set channel filter=0.000000e+000 result=40 00:12:06 Config A/D Result=40 00:12:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:06 Get A/D filter: -9.255963e+061 result=40 00:12:06 Get A/D value=-858993460 result=40 00:12:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:12:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:12:06 Aux= 00:12:06 Message to Camera, serial 98436 queued 00:12:42 Received message from Master: op=PointingHead serial=98448 00:12:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:12:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:12:43 Point started: ret=0 00:12:43 point_skyscan result=0 00:12:43 Check angles 00:12:43 SkyScan query 00:12:44 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.855<-13457 Statuses=0009 0009 00:12:44 Msec=0 True Az=153.12 Ze=-21.855 Az status=0009 Ze status=0009 00:12:44 Check angles 00:12:44 SkyScan query 00:12:45 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.87<-12058 Statuses=0009 0009 00:12:45 Msec=750 True Az=135.63 Ze=-0.87 Az status=0009 Ze status=0009 00:12:45 Check angles 00:12:45 SkyScan query 00:12:45 SkyScan query done: ret=0 az=118.11<-7874 ze=20.115<-10659 Statuses=0009 0009 00:12:45 Msec=1500 True Az=118.11 Ze=20.115 Az status=0009 Ze status=0009 00:12:46 Check angles 00:12:46 SkyScan query 00:12:46 SkyScan query done: ret=0 az=100.38<-6692 ze=41.49<-9234 Statuses=0009 0009 00:12:46 Msec=2250 True Az=100.38 Ze=41.49 Az status=0009 Ze status=0009 00:12:46 Check angles 00:12:46 SkyScan query 00:12:47 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 00:12:47 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 00:12:47 Check angles 00:12:47 SkyScan query 00:12:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:12:48 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:12:48 Message to Master queued w/err=0: serial=98448 error=0 00:12:53 Received message from Master: op=Filter serial=98449 00:12:53 Color wheel filter change from 0 to 0 00:12:53 FLIGetFilterPos err=0 currentPosition=0 00:12:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:12:53 Filter is already there-color wheel unchanged 00:12:53 Received message from Master: op=Shutter serial=98450 00:12:53 Shutter LASER close 00:12:53 Received message from Camera: op=State serial=98452 00:12:53 GetSingleValue result=40 Value=cccccccc 00:12:53 SkyScan query 00:12:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:12:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:54 Parameters OK 00:12:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:54 Set A/D data flow result=40 00:12:54 Set A/D channel type result=40 00:12:54 Set A/D encoding result=40 00:12:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:54 Set channel filter=0.000000e+000 result=40 00:12:54 Config A/D Result=40 00:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:54 Get A/D filter: -9.255963e+061 result=40 00:12:54 Get A/D value=-858993460 result=40 00:12:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:54 Parameters OK 00:12:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:54 Set A/D data flow result=40 00:12:54 Set A/D channel type result=40 00:12:54 Set A/D encoding result=40 00:12:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:54 Set channel filter=0.000000e+000 result=40 00:12:54 Config A/D Result=40 00:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:54 Get A/D filter: -9.255963e+061 result=40 00:12:54 Get A/D value=-858993460 result=40 00:12:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:12:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:12:54 Aux= 00:12:54 Message to Camera, serial 98452 queued 00:13:30 Received message from Master: op=PointingHead serial=98465 00:13:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:13:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:13:31 Point started: ret=0 00:13:31 point_skyscan result=0 00:13:31 Check angles 00:13:31 SkyScan query 00:13:32 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 00:13:32 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 00:13:32 Check angles 00:13:32 SkyScan query 00:13:33 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 00:13:33 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 00:13:33 Check angles 00:13:33 SkyScan query 00:13:34 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 00:13:34 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 00:13:34 Check angles 00:13:34 SkyScan query 00:13:34 SkyScan query done: ret=0 az=161.61<-10774 ze=38.505<-9433 Statuses=0009 0008 00:13:34 Msec=2250 True Az=161.61 Ze=38.505 Az status=0009 Ze status=0008 00:13:34 Check angles 00:13:34 SkyScan query 00:13:35 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:13:35 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:13:35 Check angles 00:13:35 SkyScan query 00:13:36 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:13:36 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:13:36 Message to Master queued w/err=0: serial=98465 error=0 00:13:41 Received message from Master: op=Filter serial=98466 00:13:41 Color wheel filter change from 0 to 0 00:13:41 FLIGetFilterPos err=0 currentPosition=0 00:13:41 FLIGetStepsRemaining err=0 RemainingSteps=0 00:13:41 Filter is already there-color wheel unchanged 00:13:41 Received message from Master: op=Shutter serial=98467 00:13:41 Shutter LASER close 00:13:41 Received message from Camera: op=State serial=98469 00:13:41 GetSingleValue result=40 Value=cccccccc 00:13:41 SkyScan query 00:13:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:13:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:42 Parameters OK 00:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:42 Set A/D data flow result=40 00:13:42 Set A/D channel type result=40 00:13:42 Set A/D encoding result=40 00:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:42 Set channel filter=0.000000e+000 result=40 00:13:42 Config A/D Result=40 00:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:42 Get A/D filter: -9.255963e+061 result=40 00:13:42 Get A/D value=-858993460 result=40 00:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:42 Parameters OK 00:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:42 Set A/D data flow result=40 00:13:42 Set A/D channel type result=40 00:13:42 Set A/D encoding result=40 00:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:42 Set channel filter=0.000000e+000 result=40 00:13:42 Config A/D Result=40 00:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:42 Get A/D filter: -9.255963e+061 result=40 00:13:42 Get A/D value=-858993460 result=40 00:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:13:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:13:42 Aux= 00:13:42 Message to Camera, serial 98469 queued 00:14:18 Received message from Master: op=PointingHead serial=98482 00:14:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:14:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:14:19 Point started: ret=0 00:14:19 point_skyscan result=0 00:14:19 Check angles 00:14:19 SkyScan query 00:14:20 SkyScan query done: ret=0 az=152.94<-10196 ze=8.535<-11431 Statuses=0009 0009 00:14:20 Msec=0 True Az=152.94 Ze=8.535 Az status=0009 Ze status=0009 00:14:20 Check angles 00:14:20 SkyScan query 00:14:21 SkyScan query done: ret=0 az=135.075<-9005 ze=-12.825<-12855 Statuses=0009 0009 00:14:21 Msec=750 True Az=135.075 Ze=-12.825 Az status=0009 Ze status=0009 00:14:21 Check angles 00:14:21 SkyScan query 00:14:22 SkyScan query done: ret=0 az=117.165<-7811 ze=-34.23<-14282 Statuses=0009 0009 00:14:22 Msec=1500 True Az=117.165 Ze=-34.23 Az status=0009 Ze status=0009 00:14:22 Check angles 00:14:22 SkyScan query 00:14:22 SkyScan query done: ret=0 az=99.72<-6648 ze=-51.555<-15437 Statuses=0009 0009 00:14:22 Msec=2250 True Az=99.72 Ze=-51.555 Az status=0009 Ze status=0009 00:14:23 Check angles 00:14:23 SkyScan query 00:14:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 00:14:23 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 00:14:23 Check angles 00:14:23 SkyScan query 00:14:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:14:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:14:24 Message to Master queued w/err=0: serial=98482 error=0 00:14:29 Received message from Master: op=Filter serial=98483 00:14:29 Color wheel filter change from 0 to 0 00:14:29 FLIGetFilterPos err=0 currentPosition=0 00:14:29 FLIGetStepsRemaining err=0 RemainingSteps=0 00:14:29 Filter is already there-color wheel unchanged 00:14:29 Received message from Master: op=Shutter serial=98484 00:14:29 Shutter LASER close 00:14:29 Received message from Camera: op=State serial=98486 00:14:29 GetSingleValue result=40 Value=cccccccc 00:14:29 SkyScan query 00:14:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:14:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:30 Parameters OK 00:14:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:30 Set A/D data flow result=40 00:14:30 Set A/D channel type result=40 00:14:30 Set A/D encoding result=40 00:14:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:30 Set channel filter=0.000000e+000 result=40 00:14:30 Config A/D Result=40 00:14:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:30 Get A/D filter: -9.255963e+061 result=40 00:14:30 Get A/D value=-858993460 result=40 00:14:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:30 Parameters OK 00:14:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:30 Set A/D data flow result=40 00:14:30 Set A/D channel type result=40 00:14:30 Set A/D encoding result=40 00:14:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:30 Set channel filter=0.000000e+000 result=40 00:14:30 Config A/D Result=40 00:14:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:30 Get A/D filter: -9.255963e+061 result=40 00:14:30 Get A/D value=-858993460 result=40 00:14:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:14:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:14:30 Aux= 00:14:30 Message to Camera, serial 98486 queued 00:15:06 Received message from Master: op=PointingHead serial=98499 00:15:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:15:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:15:07 Point started: ret=0 00:15:07 point_skyscan result=0 00:15:08 Check angles 00:15:08 SkyScan query 00:15:08 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.465<-17431 Statuses=0009 0009 00:15:08 Msec=0 True Az=109.2 Ze=-81.465 Az status=0009 Ze status=0009 00:15:08 Check angles 00:15:08 SkyScan query 00:15:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 00:15:09 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 00:15:09 Check angles 00:15:09 SkyScan query 00:15:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 00:15:10 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 00:15:10 Check angles 00:15:10 SkyScan query 00:15:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 00:15:10 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 00:15:11 Check angles 00:15:11 SkyScan query 00:15:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 00:15:11 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 00:15:11 Check angles 00:15:11 SkyScan query 00:15:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:15:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:15:12 Message to Master queued w/err=0: serial=98499 error=0 00:15:17 Received message from Master: op=Filter serial=98500 00:15:17 Color wheel filter change from 0 to 0 00:15:17 FLIGetFilterPos err=0 currentPosition=0 00:15:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:15:17 Filter is already there-color wheel unchanged 00:15:17 Received message from Master: op=Shutter serial=98501 00:15:17 Shutter LASER open 00:15:17 Received message from Camera: op=State serial=98503 00:15:17 GetSingleValue result=40 Value=cccccccc 00:15:17 SkyScan query 00:15:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:15:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:18 Parameters OK 00:15:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:18 Set A/D data flow result=40 00:15:18 Set A/D channel type result=40 00:15:18 Set A/D encoding result=40 00:15:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:18 Set channel filter=0.000000e+000 result=40 00:15:18 Config A/D Result=40 00:15:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:18 Get A/D filter: -9.255963e+061 result=40 00:15:18 Get A/D value=-858993460 result=40 00:15:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:18 Parameters OK 00:15:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:18 Set A/D data flow result=40 00:15:18 Set A/D channel type result=40 00:15:18 Set A/D encoding result=40 00:15:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:18 Set channel filter=0.000000e+000 result=40 00:15:18 Config A/D Result=40 00:15:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:18 Get A/D filter: -9.255963e+061 result=40 00:15:18 Get A/D value=-858993460 result=40 00:15:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:15:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:15:18 Aux= 00:15:18 Message to Camera, serial 98503 queued 00:15:26 Received message from Master: op=Shutter serial=98513 00:15:26 Shutter LASER close 00:15:27 Received message from Master: op=PointingHead serial=98517 00:15:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:15:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:15:27 Point started: ret=0 00:15:27 point_skyscan result=0 00:15:27 Received message from Master: op=Identify serial=98518 00:15:28 Check angles 00:15:28 SkyScan query 00:15:28 SkyScan query done: ret=0 az=89.865<-5991 ze=157.26<-1516 Statuses=0009 0009 00:15:28 Msec=0 True Az=89.865 Ze=157.26 Az status=0009 Ze status=0009 00:15:28 Check angles 00:15:28 SkyScan query 00:15:29 SkyScan query done: ret=0 az=72.465<-4831 ze=136.275<-2915 Statuses=0009 0009 00:15:29 Msec=750 True Az=72.465 Ze=136.275 Az status=0009 Ze status=0009 00:15:29 Check angles 00:15:29 SkyScan query 00:15:30 SkyScan query done: ret=0 az=55.05<-3670 ze=115.365<-4309 Statuses=0009 0009 00:15:30 Msec=1500 True Az=55.05 Ze=115.365 Az status=0009 Ze status=0009 00:15:30 Check angles 00:15:30 SkyScan query 00:15:31 SkyScan query done: ret=0 az=40.845<-2723 ze=94.35<-5710 Statuses=0009 0009 00:15:31 Msec=2250 True Az=40.845 Ze=94.35 Az status=0009 Ze status=0009 00:15:31 Check angles 00:15:31 SkyScan query 00:15:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.41<-7106 Statuses=0008 0009 00:15:31 Msec=3000 True Az=40.995 Ze=73.41 Az status=0008 Ze status=0009 00:15:31 Check angles 00:15:31 SkyScan query 00:15:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 00:15:32 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 00:15:32 Check angles 00:15:32 SkyScan query 00:15:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:15:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:15:33 Message to Master queued w/err=0: serial=98517 error=0 00:15:38 Received message from Master: op=Filter serial=98521 00:15:38 Color wheel filter change from 0 to 0 00:15:38 FLIGetFilterPos err=0 currentPosition=0 00:15:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:15:38 Filter is already there-color wheel unchanged 00:15:38 Received message from Master: op=Shutter serial=98522 00:15:38 Shutter LASER close 00:15:38 Received message from Camera: op=State serial=98524 00:15:38 GetSingleValue result=40 Value=cccccccc 00:15:38 SkyScan query 00:15:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:39 Parameters OK 00:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:39 Set A/D data flow result=40 00:15:39 Set A/D channel type result=40 00:15:39 Set A/D encoding result=40 00:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:39 Set channel filter=0.000000e+000 result=40 00:15:39 Config A/D Result=40 00:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:39 Get A/D filter: -9.255963e+061 result=40 00:15:39 Get A/D value=-858993460 result=40 00:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:39 Parameters OK 00:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:39 Set A/D data flow result=40 00:15:39 Set A/D channel type result=40 00:15:39 Set A/D encoding result=40 00:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:39 Set channel filter=0.000000e+000 result=40 00:15:39 Config A/D Result=40 00:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:39 Get A/D filter: -9.255963e+061 result=40 00:15:39 Get A/D value=-858993460 result=40 00:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:15:39 Aux= 00:15:39 Message to Camera, serial 98524 queued [UTC 2018-12-13 00:15:53] 00:16:16 Received message from Master: op=PointingHead serial=98537 00:16:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:16:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:16:16 Point started: ret=0 00:16:16 point_skyscan result=0 00:16:17 Check angles 00:16:17 SkyScan query 00:16:17 SkyScan query done: ret=0 az=40.995<-2733 ze=21.87<-10542 Statuses=0008 0009 00:16:17 Msec=0 True Az=40.995 Ze=21.87 Az status=0008 Ze status=0009 00:16:18 Check angles 00:16:18 SkyScan query 00:16:18 SkyScan query done: ret=0 az=40.995<-2733 ze=0.45<-11970 Statuses=0008 0009 00:16:18 Msec=750 True Az=40.995 Ze=0.45 Az status=0008 Ze status=0009 00:16:18 Check angles 00:16:18 SkyScan query 00:16:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.985<-13399 Statuses=0008 0009 00:16:19 Msec=1500 True Az=40.995 Ze=-20.985 Az status=0008 Ze status=0009 00:16:19 Check angles 00:16:19 SkyScan query 00:16:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:16:20 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:16:20 Check angles 00:16:20 SkyScan query 00:16:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:16:20 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:16:20 Message to Master queued w/err=0: serial=98537 error=0 00:16:25 Received message from Master: op=Filter serial=98538 00:16:25 Color wheel filter change from 0 to 0 00:16:25 FLIGetFilterPos err=0 currentPosition=0 00:16:25 FLIGetStepsRemaining err=0 RemainingSteps=0 00:16:25 Filter is already there-color wheel unchanged 00:16:26 Received message from Master: op=Shutter serial=98539 00:16:26 Shutter LASER close 00:16:26 Received message from Camera: op=State serial=98541 00:16:26 GetSingleValue result=40 Value=cccccccc 00:16:26 SkyScan query 00:16:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:16:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:26 Parameters OK 00:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:26 Set A/D data flow result=40 00:16:26 Set A/D channel type result=40 00:16:26 Set A/D encoding result=40 00:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:26 Set channel filter=0.000000e+000 result=40 00:16:26 Config A/D Result=40 00:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:26 Get A/D filter: -9.255963e+061 result=40 00:16:26 Get A/D value=-858993460 result=40 00:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:26 Parameters OK 00:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:26 Set A/D data flow result=40 00:16:26 Set A/D channel type result=40 00:16:26 Set A/D encoding result=40 00:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:26 Set channel filter=0.000000e+000 result=40 00:16:26 Config A/D Result=40 00:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:26 Get A/D filter: -9.255963e+061 result=40 00:16:26 Get A/D value=-858993460 result=40 00:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:16:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:16:26 Aux= 00:16:26 Message to Camera, serial 98541 queued 00:17:03 Received message from Master: op=PointingHead serial=98554 00:17:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:17:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:17:03 Point started: ret=0 00:17:03 point_skyscan result=0 00:17:04 Check angles 00:17:04 SkyScan query 00:17:05 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.205<-16547 Statuses=0009 0009 00:17:05 Msec=0 True Az=63.81 Ze=-68.205 Az status=0009 Ze status=0009 00:17:05 Check angles 00:17:05 SkyScan query 00:17:06 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.19<-17946 Statuses=0009 0009 00:17:06 Msec=750 True Az=81.375 Ze=-89.19 Az status=0009 Ze status=0009 00:17:06 Check angles 00:17:06 SkyScan query 00:17:06 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.1<-19340 Statuses=0009 0009 00:17:06 Msec=1500 True Az=98.91 Ze=-110.1 Az status=0009 Ze status=0009 00:17:06 Check angles 00:17:06 SkyScan query 00:17:07 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.49<-20766 Statuses=0009 0009 00:17:07 Msec=2250 True Az=116.715 Ze=-131.49 Az status=0009 Ze status=0009 00:17:07 Check angles 00:17:07 SkyScan query 00:17:08 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 00:17:08 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 00:17:08 Check angles 00:17:08 SkyScan query 00:17:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:17:09 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:17:09 Message to Master queued w/err=0: serial=98554 error=0 00:17:14 Received message from Master: op=Filter serial=98555 00:17:14 Color wheel filter change from 0 to 0 00:17:14 FLIGetFilterPos err=0 currentPosition=0 00:17:14 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:14 Filter is already there-color wheel unchanged 00:17:14 Received message from Master: op=Shutter serial=98556 00:17:14 Shutter LASER close 00:17:14 Received message from Camera: op=State serial=98558 00:17:14 GetSingleValue result=40 Value=cccccccc 00:17:14 SkyScan query 00:17:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:17:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:14 Parameters OK 00:17:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:14 Set A/D data flow result=40 00:17:14 Set A/D channel type result=40 00:17:14 Set A/D encoding result=40 00:17:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:14 Set channel filter=0.000000e+000 result=40 00:17:14 Config A/D Result=40 00:17:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:14 Get A/D filter: -9.255963e+061 result=40 00:17:14 Get A/D value=-858993460 result=40 00:17:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:14 Parameters OK 00:17:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:14 Set A/D data flow result=40 00:17:14 Set A/D channel type result=40 00:17:14 Set A/D encoding result=40 00:17:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:14 Set channel filter=0.000000e+000 result=40 00:17:14 Config A/D Result=40 00:17:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:14 Get A/D filter: -9.255963e+061 result=40 00:17:14 Get A/D value=-858993460 result=40 00:17:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:14 Aux= 00:17:14 Message to Camera, serial 98558 queued 00:17:51 Received message from Master: op=PointingHead serial=98571 00:17:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:17:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:17:52 Point started: ret=0 00:17:52 point_skyscan result=0 00:17:52 Check angles 00:17:52 SkyScan query 00:17:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 00:17:53 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 00:17:53 Check angles 00:17:53 SkyScan query 00:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:17:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:17:54 Message to Master queued w/err=0: serial=98571 error=0 00:17:59 Received message from Master: op=Filter serial=98572 00:17:59 Color wheel filter change from 0 to 0 00:17:59 FLIGetFilterPos err=0 currentPosition=0 00:17:59 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:59 Filter is already there-color wheel unchanged 00:17:59 Received message from Master: op=Shutter serial=98573 00:17:59 Shutter LASER open 00:17:59 Received message from Camera: op=State serial=98575 00:17:59 GetSingleValue result=40 Value=cccccccc 00:17:59 SkyScan query 00:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:18:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:00 Parameters OK 00:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:00 Set A/D data flow result=40 00:18:00 Set A/D channel type result=40 00:18:00 Set A/D encoding result=40 00:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:00 Set channel filter=0.000000e+000 result=40 00:18:00 Config A/D Result=40 00:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:00 Get A/D filter: -9.255963e+061 result=40 00:18:00 Get A/D value=-858993460 result=40 00:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:00 Parameters OK 00:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:00 Set A/D data flow result=40 00:18:00 Set A/D channel type result=40 00:18:00 Set A/D encoding result=40 00:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:00 Set channel filter=0.000000e+000 result=40 00:18:00 Config A/D Result=40 00:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:00 Get A/D filter: -9.255963e+061 result=40 00:18:00 Get A/D value=-858993460 result=40 00:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:18:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:18:00 Aux= 00:18:00 Message to Camera, serial 98575 queued 00:18:08 Received message from Master: op=Shutter serial=98585 00:18:08 Shutter LASER close 00:18:09 Received message from Master: op=PointingHead serial=98589 00:18:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:18:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:18:09 Point started: ret=0 00:18:09 point_skyscan result=0 00:18:10 Check angles 00:18:10 SkyScan query 00:18:10 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.07<-21538 Statuses=0009 0009 00:18:10 Msec=0 True Az=136.17 Ze=-143.07 Az status=0009 Ze status=0009 00:18:10 Check angles 00:18:10 SkyScan query 00:18:11 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.085<-20139 Statuses=0009 0009 00:18:11 Msec=750 True Az=153.57 Ze=-122.085 Az status=0009 Ze status=0009 00:18:11 Check angles 00:18:11 SkyScan query 00:18:12 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.19<-18746 Statuses=0009 0009 00:18:12 Msec=1500 True Az=171.09 Ze=-101.19 Az status=0009 Ze status=0009 00:18:12 Check angles 00:18:12 SkyScan query 00:18:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.815<-17321 Statuses=0008 0009 00:18:13 Msec=2250 True Az=176.01 Ze=-79.815 Az status=0008 Ze status=0009 00:18:13 Check angles 00:18:13 SkyScan query 00:18:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.32<-15888 Statuses=0008 0009 00:18:13 Msec=3000 True Az=176.01 Ze=-58.32 Az status=0008 Ze status=0009 00:18:13 Check angles 00:18:13 SkyScan query 00:18:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:18:14 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:18:14 Message to Master queued w/err=0: serial=98589 error=0 00:18:19 Received message from Master: op=Filter serial=98590 00:18:19 Color wheel filter change from 0 to 0 00:18:19 FLIGetFilterPos err=0 currentPosition=0 00:18:19 FLIGetStepsRemaining err=0 RemainingSteps=0 00:18:19 Filter is already there-color wheel unchanged 00:18:19 Received message from Master: op=Shutter serial=98591 00:18:19 Shutter LASER close 00:18:19 Received message from Camera: op=State serial=98593 00:18:19 GetSingleValue result=40 Value=cccccccc 00:18:19 SkyScan query 00:18:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:18:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:20 Parameters OK 00:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:20 Set A/D data flow result=40 00:18:20 Set A/D channel type result=40 00:18:20 Set A/D encoding result=40 00:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:20 Set channel filter=0.000000e+000 result=40 00:18:20 Config A/D Result=40 00:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:20 Get A/D filter: -9.255963e+061 result=40 00:18:20 Get A/D value=-858993460 result=40 00:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:20 Parameters OK 00:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:20 Set A/D data flow result=40 00:18:20 Set A/D channel type result=40 00:18:20 Set A/D encoding result=40 00:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:20 Set channel filter=0.000000e+000 result=40 00:18:20 Config A/D Result=40 00:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:20 Get A/D filter: -9.255963e+061 result=40 00:18:20 Get A/D value=-858993460 result=40 00:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:18:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:18:20 Aux= 00:18:20 Message to Camera, serial 98593 queued 00:18:57 Received message from Master: op=PointingHead serial=98606 00:18:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:18:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:18:57 Point started: ret=0 00:18:57 point_skyscan result=0 00:18:58 Check angles 00:18:58 SkyScan query 00:18:58 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.795<-13453 Statuses=0009 0009 00:18:58 Msec=0 True Az=152.94 Ze=-21.795 Az status=0009 Ze status=0009 00:18:59 Check angles 00:18:59 SkyScan query 00:18:59 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.39<-12026 Statuses=0009 0009 00:18:59 Msec=750 True Az=135.165 Ze=-0.39 Az status=0009 Ze status=0009 00:18:59 Check angles 00:18:59 SkyScan query 00:19:00 SkyScan query done: ret=0 az=117.57<-7838 ze=20.55<-10630 Statuses=0009 0009 00:19:00 Msec=1500 True Az=117.57 Ze=20.55 Az status=0009 Ze status=0009 00:19:00 Check angles 00:19:00 SkyScan query 00:19:01 SkyScan query done: ret=0 az=100.29<-6686 ze=41.535<-9231 Statuses=0009 0009 00:19:01 Msec=2250 True Az=100.29 Ze=41.535 Az status=0009 Ze status=0009 00:19:01 Check angles 00:19:01 SkyScan query 00:19:01 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:19:01 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:19:02 Check angles 00:19:02 SkyScan query 00:19:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:19:02 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:19:02 Message to Master queued w/err=0: serial=98606 error=0 00:19:07 Received message from Master: op=Filter serial=98607 00:19:07 Color wheel filter change from 0 to 0 00:19:07 FLIGetFilterPos err=0 currentPosition=0 00:19:07 FLIGetStepsRemaining err=0 RemainingSteps=0 00:19:07 Filter is already there-color wheel unchanged 00:19:07 Received message from Master: op=Shutter serial=98608 00:19:07 Shutter LASER close 00:19:07 Received message from Camera: op=State serial=98610 00:19:07 GetSingleValue result=40 Value=cccccccc 00:19:07 SkyScan query 00:19:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:19:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:08 Parameters OK 00:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:08 Set A/D data flow result=40 00:19:08 Set A/D channel type result=40 00:19:08 Set A/D encoding result=40 00:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:08 Set channel filter=0.000000e+000 result=40 00:19:08 Config A/D Result=40 00:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:08 Get A/D filter: -9.255963e+061 result=40 00:19:08 Get A/D value=-858993460 result=40 00:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:08 Parameters OK 00:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:08 Set A/D data flow result=40 00:19:08 Set A/D channel type result=40 00:19:08 Set A/D encoding result=40 00:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:08 Set channel filter=0.000000e+000 result=40 00:19:08 Config A/D Result=40 00:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:08 Get A/D filter: -9.255963e+061 result=40 00:19:08 Get A/D value=-858993460 result=40 00:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:19:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:19:08 Aux= 00:19:08 Message to Camera, serial 98610 queued 00:19:45 Received message from Master: op=PointingHead serial=98623 00:19:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:19:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:19:45 Point started: ret=0 00:19:45 point_skyscan result=0 00:19:46 Check angles 00:19:46 SkyScan query 00:19:47 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 00:19:47 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 00:19:47 Check angles 00:19:47 SkyScan query 00:19:47 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 00:19:47 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 00:19:47 Check angles 00:19:47 SkyScan query 00:19:48 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 00:19:48 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 00:19:48 Check angles 00:19:48 SkyScan query 00:19:49 SkyScan query done: ret=0 az=161.805<-10787 ze=38.505<-9433 Statuses=0009 0008 00:19:49 Msec=2250 True Az=161.805 Ze=38.505 Az status=0009 Ze status=0008 00:19:49 Check angles 00:19:49 SkyScan query 00:19:50 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:19:50 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:19:50 Check angles 00:19:50 SkyScan query 00:19:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:19:50 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:19:50 Message to Master queued w/err=0: serial=98623 error=0 00:19:55 Received message from Master: op=Filter serial=98624 00:19:55 Color wheel filter change from 0 to 0 00:19:55 FLIGetFilterPos err=0 currentPosition=0 00:19:55 FLIGetStepsRemaining err=0 RemainingSteps=0 00:19:55 Filter is already there-color wheel unchanged 00:19:55 Received message from Master: op=Shutter serial=98625 00:19:55 Shutter LASER close 00:19:56 Received message from Camera: op=State serial=98627 00:19:56 GetSingleValue result=40 Value=cccccccc 00:19:56 SkyScan query 00:19:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:19:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:56 Parameters OK 00:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:56 Set A/D data flow result=40 00:19:56 Set A/D channel type result=40 00:19:56 Set A/D encoding result=40 00:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:56 Set channel filter=0.000000e+000 result=40 00:19:56 Config A/D Result=40 00:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:56 Get A/D filter: -9.255963e+061 result=40 00:19:56 Get A/D value=-858993460 result=40 00:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:56 Parameters OK 00:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:56 Set A/D data flow result=40 00:19:56 Set A/D channel type result=40 00:19:56 Set A/D encoding result=40 00:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:56 Set channel filter=0.000000e+000 result=40 00:19:56 Config A/D Result=40 00:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:56 Get A/D filter: -9.255963e+061 result=40 00:19:56 Get A/D value=-858993460 result=40 00:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:19:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:19:56 Aux= 00:19:56 Message to Camera, serial 98627 queued 00:20:33 Received message from Master: op=PointingHead serial=98640 00:20:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:20:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:20:33 Point started: ret=0 00:20:33 point_skyscan result=0 00:20:34 Check angles 00:20:34 SkyScan query 00:20:35 SkyScan query done: ret=0 az=152.595<-10173 ze=8.145<-11457 Statuses=0009 0009 00:20:35 Msec=0 True Az=152.595 Ze=8.145 Az status=0009 Ze status=0009 00:20:35 Check angles 00:20:35 SkyScan query 00:20:35 SkyScan query done: ret=0 az=134.64<-8976 ze=-13.26<-12884 Statuses=0009 0009 00:20:35 Msec=750 True Az=134.64 Ze=-13.26 Az status=0009 Ze status=0009 00:20:36 Check angles 00:20:36 SkyScan query 00:20:36 SkyScan query done: ret=0 az=117.15<-7810 ze=-34.2<-14280 Statuses=0009 0009 00:20:36 Msec=1500 True Az=117.15 Ze=-34.2 Az status=0009 Ze status=0009 00:20:36 Check angles 00:20:36 SkyScan query 00:20:37 SkyScan query done: ret=0 az=99.69<-6646 ze=-51.57<-15438 Statuses=0009 0009 00:20:37 Msec=2250 True Az=99.69 Ze=-51.57 Az status=0009 Ze status=0009 00:20:37 Check angles 00:20:37 SkyScan query 00:20:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 00:20:38 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 00:20:38 Check angles 00:20:38 SkyScan query 00:20:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:20:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:20:38 Message to Master queued w/err=0: serial=98640 error=0 00:20:43 Received message from Master: op=Filter serial=98641 00:20:43 Color wheel filter change from 0 to 0 00:20:43 FLIGetFilterPos err=0 currentPosition=0 00:20:43 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:43 Filter is already there-color wheel unchanged 00:20:44 Received message from Master: op=Shutter serial=98642 00:20:44 Shutter LASER close 00:20:44 Received message from Camera: op=State serial=98644 00:20:44 GetSingleValue result=40 Value=cccccccc 00:20:44 SkyScan query 00:20:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:20:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:44 Parameters OK 00:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:44 Set A/D data flow result=40 00:20:44 Set A/D channel type result=40 00:20:44 Set A/D encoding result=40 00:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:44 Set channel filter=0.000000e+000 result=40 00:20:44 Config A/D Result=40 00:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:44 Get A/D filter: -9.255963e+061 result=40 00:20:44 Get A/D value=-858993460 result=40 00:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:44 Parameters OK 00:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:44 Set A/D data flow result=40 00:20:44 Set A/D channel type result=40 00:20:44 Set A/D encoding result=40 00:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:44 Set channel filter=0.000000e+000 result=40 00:20:44 Config A/D Result=40 00:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:44 Get A/D filter: -9.255963e+061 result=40 00:20:44 Get A/D value=-858993460 result=40 00:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:44 Aux= 00:20:44 Message to Camera, serial 98644 queued 00:21:21 Received message from Master: op=PointingHead serial=98657 00:21:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:21:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:21:21 Point started: ret=0 00:21:21 point_skyscan result=0 00:21:22 Check angles 00:21:22 SkyScan query 00:21:23 SkyScan query done: ret=0 az=109.455<-7297 ze=-81.75<-17450 Statuses=0009 0009 00:21:23 Msec=0 True Az=109.455 Ze=-81.75 Az status=0009 Ze status=0009 00:21:23 Check angles 00:21:23 SkyScan query 00:21:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 00:21:23 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 00:21:24 Check angles 00:21:24 SkyScan query 00:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 00:21:24 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 00:21:24 Check angles 00:21:24 SkyScan query 00:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 00:21:25 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 00:21:25 Check angles 00:21:25 SkyScan query 00:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 00:21:26 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 00:21:26 Check angles 00:21:26 SkyScan query 00:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:21:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:21:27 Message to Master queued w/err=0: serial=98657 error=0 00:21:32 Received message from Master: op=Filter serial=98658 00:21:32 Color wheel filter change from 0 to 0 00:21:32 FLIGetFilterPos err=0 currentPosition=0 00:21:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:21:32 Filter is already there-color wheel unchanged 00:21:32 Received message from Master: op=Shutter serial=98659 00:21:32 Shutter LASER open 00:21:32 Received message from Camera: op=State serial=98661 00:21:32 GetSingleValue result=40 Value=cccccccc 00:21:32 SkyScan query 00:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:21:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:32 Parameters OK 00:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:32 Set A/D data flow result=40 00:21:32 Set A/D channel type result=40 00:21:32 Set A/D encoding result=40 00:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:32 Set channel filter=0.000000e+000 result=40 00:21:32 Config A/D Result=40 00:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:32 Get A/D filter: -9.255963e+061 result=40 00:21:32 Get A/D value=-858993460 result=40 00:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:32 Parameters OK 00:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:32 Set A/D data flow result=40 00:21:32 Set A/D channel type result=40 00:21:32 Set A/D encoding result=40 00:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:32 Set channel filter=0.000000e+000 result=40 00:21:32 Config A/D Result=40 00:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:32 Get A/D filter: -9.255963e+061 result=40 00:21:32 Get A/D value=-858993460 result=40 00:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:21:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:21:32 Aux= 00:21:32 Message to Camera, serial 98661 queued 00:21:40 Received message from Master: op=Shutter serial=98670 00:21:40 Shutter LASER close 00:21:40 Received message from Master: op=PointingHead serial=98674 00:21:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:21:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:21:41 Point started: ret=0 00:21:41 point_skyscan result=0 00:21:41 Check angles 00:21:41 SkyScan query 00:21:42 SkyScan query done: ret=0 az=89.82<-5988 ze=157.14<-1524 Statuses=0009 0009 00:21:42 Msec=0 True Az=89.82 Ze=157.14 Az status=0009 Ze status=0009 00:21:42 Check angles 00:21:42 SkyScan query 00:21:43 SkyScan query done: ret=0 az=72.315<-4821 ze=136.155<-2923 Statuses=0009 0009 00:21:43 Msec=750 True Az=72.315 Ze=136.155 Az status=0009 Ze status=0009 00:21:43 Check angles 00:21:43 SkyScan query 00:21:44 SkyScan query done: ret=0 az=54.975<-3665 ze=115.23<-4318 Statuses=0009 0009 00:21:44 Msec=1500 True Az=54.975 Ze=115.23 Az status=0009 Ze status=0009 00:21:44 Check angles 00:21:44 SkyScan query 00:21:44 SkyScan query done: ret=0 az=40.845<-2723 ze=94.245<-5717 Statuses=0009 0009 00:21:44 Msec=2250 True Az=40.845 Ze=94.245 Az status=0009 Ze status=0009 00:21:44 Check angles 00:21:44 SkyScan query 00:21:45 SkyScan query done: ret=0 az=40.995<-2733 ze=73.305<-7113 Statuses=0008 0009 00:21:45 Msec=3000 True Az=40.995 Ze=73.305 Az status=0008 Ze status=0009 00:21:45 Check angles 00:21:45 SkyScan query 00:21:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 00:21:46 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 00:21:46 Check angles 00:21:46 SkyScan query 00:21:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:21:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:21:47 Message to Master queued w/err=0: serial=98674 error=0 00:21:52 Received message from Master: op=Filter serial=98675 00:21:52 Color wheel filter change from 0 to 0 00:21:52 FLIGetFilterPos err=0 currentPosition=0 00:21:52 FLIGetStepsRemaining err=0 RemainingSteps=0 00:21:52 Filter is already there-color wheel unchanged 00:21:52 Received message from Master: op=Shutter serial=98676 00:21:52 Shutter LASER close 00:21:52 Received message from Camera: op=State serial=98678 00:21:52 GetSingleValue result=40 Value=cccccccc 00:21:52 SkyScan query 00:21:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:21:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:52 Parameters OK 00:21:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:52 Set A/D data flow result=40 00:21:52 Set A/D channel type result=40 00:21:52 Set A/D encoding result=40 00:21:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:52 Set channel filter=0.000000e+000 result=40 00:21:52 Config A/D Result=40 00:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:52 Get A/D filter: -9.255963e+061 result=40 00:21:52 Get A/D value=-858993460 result=40 00:21:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:52 Parameters OK 00:21:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:52 Set A/D data flow result=40 00:21:52 Set A/D channel type result=40 00:21:52 Set A/D encoding result=40 00:21:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:52 Set channel filter=0.000000e+000 result=40 00:21:52 Config A/D Result=40 00:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:52 Get A/D filter: -9.255963e+061 result=40 00:21:52 Get A/D value=-858993460 result=40 00:21:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:21:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:21:52 Aux= 00:21:52 Message to Camera, serial 98678 queued 00:22:29 Received message from Master: op=PointingHead serial=98691 00:22:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:22:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:22:30 Point started: ret=0 00:22:30 point_skyscan result=0 00:22:31 Check angles 00:22:31 SkyScan query 00:22:31 SkyScan query done: ret=0 az=40.995<-2733 ze=21.255<-10583 Statuses=0008 0009 00:22:31 Msec=0 True Az=40.995 Ze=21.255 Az status=0008 Ze status=0009 00:22:31 Check angles 00:22:31 SkyScan query 00:22:32 SkyScan query done: ret=0 az=40.995<-2733 ze=0.27<-11982 Statuses=0008 0009 00:22:32 Msec=750 True Az=40.995 Ze=0.27 Az status=0008 Ze status=0009 00:22:32 Check angles 00:22:32 SkyScan query 00:22:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.67<-13378 Statuses=0008 0009 00:22:33 Msec=1500 True Az=40.995 Ze=-20.67 Az status=0008 Ze status=0009 00:22:33 Check angles 00:22:33 SkyScan query 00:22:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:22:33 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:22:34 Check angles 00:22:34 SkyScan query 00:22:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:22:34 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:22:34 Message to Master queued w/err=0: serial=98691 error=0 00:22:39 Received message from Master: op=Filter serial=98692 00:22:39 Color wheel filter change from 0 to 0 00:22:39 FLIGetFilterPos err=0 currentPosition=0 00:22:39 FLIGetStepsRemaining err=0 RemainingSteps=0 00:22:39 Filter is already there-color wheel unchanged 00:22:39 Received message from Master: op=Shutter serial=98693 00:22:39 Shutter LASER close 00:22:39 Received message from Camera: op=State serial=98695 00:22:39 GetSingleValue result=40 Value=cccccccc 00:22:39 SkyScan query 00:22:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:22:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:40 Parameters OK 00:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:40 Set A/D data flow result=40 00:22:40 Set A/D channel type result=40 00:22:40 Set A/D encoding result=40 00:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:40 Set channel filter=0.000000e+000 result=40 00:22:40 Config A/D Result=40 00:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:40 Get A/D filter: -9.255963e+061 result=40 00:22:40 Get A/D value=-858993460 result=40 00:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:40 Parameters OK 00:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:40 Set A/D data flow result=40 00:22:40 Set A/D channel type result=40 00:22:40 Set A/D encoding result=40 00:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:40 Set channel filter=0.000000e+000 result=40 00:22:40 Config A/D Result=40 00:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:40 Get A/D filter: -9.255963e+061 result=40 00:22:40 Get A/D value=-858993460 result=40 00:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:22:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:22:40 Aux= 00:22:40 Message to Camera, serial 98695 queued 00:23:17 Received message from Master: op=PointingHead serial=98708 00:23:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:23:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:23:17 Point started: ret=0 00:23:17 point_skyscan result=0 00:23:18 Check angles 00:23:18 SkyScan query 00:23:18 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.1<-16540 Statuses=0009 0009 00:23:18 Msec=0 True Az=63.765 Ze=-68.1 Az status=0009 Ze status=0009 00:23:19 Check angles 00:23:19 SkyScan query 00:23:19 SkyScan query done: ret=0 az=81.75<-5450 ze=-89.475<-17965 Statuses=0009 0009 00:23:19 Msec=750 True Az=81.75 Ze=-89.475 Az status=0009 Ze status=0009 00:23:19 Check angles 00:23:19 SkyScan query 00:23:20 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.49<-19366 Statuses=0009 0009 00:23:20 Msec=1500 True Az=99.165 Ze=-110.49 Az status=0009 Ze status=0009 00:23:20 Check angles 00:23:20 SkyScan query 00:23:21 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.37<-20758 Statuses=0009 0009 00:23:21 Msec=2250 True Az=116.55 Ze=-131.37 Az status=0009 Ze status=0009 00:23:21 Check angles 00:23:21 SkyScan query 00:23:21 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 00:23:21 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 00:23:22 Check angles 00:23:22 SkyScan query 00:23:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:23:22 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:23:22 Message to Master queued w/err=0: serial=98708 error=0 00:23:27 Received message from Master: op=Filter serial=98709 00:23:27 Color wheel filter change from 0 to 0 00:23:27 FLIGetFilterPos err=0 currentPosition=0 00:23:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:23:27 Filter is already there-color wheel unchanged 00:23:27 Received message from Master: op=Shutter serial=98710 00:23:27 Shutter LASER close 00:23:27 Received message from Camera: op=State serial=98712 00:23:27 GetSingleValue result=40 Value=cccccccc 00:23:27 SkyScan query 00:23:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:23:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:28 Parameters OK 00:23:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:28 Set A/D data flow result=40 00:23:28 Set A/D channel type result=40 00:23:28 Set A/D encoding result=40 00:23:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:28 Set channel filter=0.000000e+000 result=40 00:23:28 Config A/D Result=40 00:23:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:28 Get A/D filter: -9.255963e+061 result=40 00:23:28 Get A/D value=-858993460 result=40 00:23:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:28 Parameters OK 00:23:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:28 Set A/D data flow result=40 00:23:28 Set A/D channel type result=40 00:23:28 Set A/D encoding result=40 00:23:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:28 Set channel filter=0.000000e+000 result=40 00:23:28 Config A/D Result=40 00:23:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:28 Get A/D filter: -9.255963e+061 result=40 00:23:28 Get A/D value=-858993460 result=40 00:23:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:23:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:23:28 Aux= 00:23:28 Message to Camera, serial 98712 queued 00:24:05 Received message from Master: op=PointingHead serial=98725 00:24:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:24:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:24:05 Point started: ret=0 00:24:05 point_skyscan result=0 00:24:06 Check angles 00:24:06 SkyScan query 00:24:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0009 0009 00:24:06 Msec=0 True Az=112.995 Ze=-171.42 Az status=0009 Ze status=0009 00:24:07 Check angles 00:24:07 SkyScan query 00:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:24:07 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:24:07 Message to Master queued w/err=0: serial=98725 error=0 00:24:12 Received message from Master: op=Filter serial=98726 00:24:12 Color wheel filter change from 0 to 0 00:24:12 FLIGetFilterPos err=0 currentPosition=0 00:24:12 FLIGetStepsRemaining err=0 RemainingSteps=0 00:24:12 Filter is already there-color wheel unchanged 00:24:12 Received message from Master: op=Shutter serial=98727 00:24:12 Shutter LASER open 00:24:13 Received message from Camera: op=State serial=98729 00:24:13 GetSingleValue result=40 Value=cccccccc 00:24:13 SkyScan query 00:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:24:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:13 Parameters OK 00:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:13 Set A/D data flow result=40 00:24:13 Set A/D channel type result=40 00:24:13 Set A/D encoding result=40 00:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:13 Set channel filter=0.000000e+000 result=40 00:24:13 Config A/D Result=40 00:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:13 Get A/D filter: -9.255963e+061 result=40 00:24:13 Get A/D value=-858993460 result=40 00:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:13 Parameters OK 00:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:13 Set A/D data flow result=40 00:24:13 Set A/D channel type result=40 00:24:13 Set A/D encoding result=40 00:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:13 Set channel filter=0.000000e+000 result=40 00:24:13 Config A/D Result=40 00:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:13 Get A/D filter: -9.255963e+061 result=40 00:24:13 Get A/D value=-858993460 result=40 00:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:24:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:24:13 Aux= 00:24:13 Message to Camera, serial 98729 queued 00:24:22 Received message from Master: op=Shutter serial=98739 00:24:22 Shutter LASER close 00:24:22 Received message from Master: op=PointingHead serial=98743 00:24:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:24:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:24:23 Point started: ret=0 00:24:23 point_skyscan result=0 00:24:23 Check angles 00:24:23 SkyScan query 00:24:24 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.235<-21549 Statuses=0009 0009 00:24:24 Msec=0 True Az=135.96 Ze=-143.235 Az status=0009 Ze status=0009 00:24:24 Check angles 00:24:24 SkyScan query 00:24:25 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.235<-20149 Statuses=0009 0009 00:24:25 Msec=750 True Az=153.435 Ze=-122.235 Az status=0009 Ze status=0009 00:24:25 Check angles 00:24:25 SkyScan query 00:24:25 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.37<-18758 Statuses=0009 0009 00:24:25 Msec=1500 True Az=170.895 Ze=-101.37 Az status=0009 Ze status=0009 00:24:26 Check angles 00:24:26 SkyScan query 00:24:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.37<-17358 Statuses=0008 0009 00:24:26 Msec=2250 True Az=176.01 Ze=-80.37 Az status=0008 Ze status=0009 00:24:26 Check angles 00:24:26 SkyScan query 00:24:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.43<-15962 Statuses=0008 0009 00:24:27 Msec=3000 True Az=176.01 Ze=-59.43 Az status=0008 Ze status=0009 00:24:27 Check angles 00:24:27 SkyScan query 00:24:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:24:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:24:28 Message to Master queued w/err=0: serial=98743 error=0 00:24:33 Received message from Master: op=Filter serial=98744 00:24:33 Color wheel filter change from 0 to 0 00:24:33 FLIGetFilterPos err=0 currentPosition=0 00:24:33 FLIGetStepsRemaining err=0 RemainingSteps=0 00:24:33 Filter is already there-color wheel unchanged 00:24:33 Received message from Master: op=Shutter serial=98745 00:24:33 Shutter LASER close 00:24:33 Received message from Camera: op=State serial=98747 00:24:33 GetSingleValue result=40 Value=cccccccc 00:24:33 SkyScan query 00:24:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:24:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:34 Parameters OK 00:24:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:34 Set A/D data flow result=40 00:24:34 Set A/D channel type result=40 00:24:34 Set A/D encoding result=40 00:24:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:34 Set channel filter=0.000000e+000 result=40 00:24:34 Config A/D Result=40 00:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:34 Get A/D filter: -9.255963e+061 result=40 00:24:34 Get A/D value=-858993460 result=40 00:24:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:34 Parameters OK 00:24:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:34 Set A/D data flow result=40 00:24:34 Set A/D channel type result=40 00:24:34 Set A/D encoding result=40 00:24:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:34 Set channel filter=0.000000e+000 result=40 00:24:34 Config A/D Result=40 00:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:34 Get A/D filter: -9.255963e+061 result=40 00:24:34 Get A/D value=-858993460 result=40 00:24:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:24:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:24:34 Aux= 00:24:34 Message to Camera, serial 98747 queued 00:25:10 Received message from Master: op=PointingHead serial=98760 00:25:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:25:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:25:11 Point started: ret=0 00:25:11 point_skyscan result=0 00:25:11 Check angles 00:25:11 SkyScan query 00:25:12 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.225<-13415 Statuses=0009 0009 00:25:12 Msec=0 True Az=152.58 Ze=-21.225 Az status=0009 Ze status=0009 00:25:12 Check angles 00:25:12 SkyScan query 00:25:13 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.255<-12017 Statuses=0009 0009 00:25:13 Msec=750 True Az=135.135 Ze=-0.255 Az status=0009 Ze status=0009 00:25:13 Check angles 00:25:13 SkyScan query 00:25:14 SkyScan query done: ret=0 az=117.54<-7836 ze=20.655<-10623 Statuses=0009 0009 00:25:14 Msec=1500 True Az=117.54 Ze=20.655 Az status=0009 Ze status=0009 00:25:14 Check angles 00:25:14 SkyScan query 00:25:14 SkyScan query done: ret=0 az=99.84<-6656 ze=42.105<-9193 Statuses=0009 0009 00:25:14 Msec=2250 True Az=99.84 Ze=42.105 Az status=0009 Ze status=0009 00:25:14 Check angles 00:25:14 SkyScan query 00:25:15 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:25:15 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:25:15 Check angles 00:25:15 SkyScan query 00:25:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:25:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:25:16 Message to Master queued w/err=0: serial=98760 error=0 00:25:21 Received message from Master: op=Filter serial=98761 00:25:21 Color wheel filter change from 0 to 0 00:25:21 FLIGetFilterPos err=0 currentPosition=0 00:25:21 FLIGetStepsRemaining err=0 RemainingSteps=0 00:25:21 Filter is already there-color wheel unchanged 00:25:21 Received message from Master: op=Shutter serial=98762 00:25:21 Shutter LASER close 00:25:21 Received message from Camera: op=State serial=98764 00:25:21 GetSingleValue result=40 Value=cccccccc 00:25:21 SkyScan query 00:25:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:25:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:22 Parameters OK 00:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:22 Set A/D data flow result=40 00:25:22 Set A/D channel type result=40 00:25:22 Set A/D encoding result=40 00:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:22 Set channel filter=0.000000e+000 result=40 00:25:22 Config A/D Result=40 00:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:22 Get A/D filter: -9.255963e+061 result=40 00:25:22 Get A/D value=-858993460 result=40 00:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:22 Parameters OK 00:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:22 Set A/D data flow result=40 00:25:22 Set A/D channel type result=40 00:25:22 Set A/D encoding result=40 00:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:22 Set channel filter=0.000000e+000 result=40 00:25:22 Config A/D Result=40 00:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:22 Get A/D filter: -9.255963e+061 result=40 00:25:22 Get A/D value=-858993460 result=40 00:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:25:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:25:22 Aux= 00:25:22 Message to Camera, serial 98764 queued 00:25:59 Received message from Master: op=PointingHead serial=98777 00:25:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:25:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:25:59 Point started: ret=0 00:25:59 point_skyscan result=0 00:26:00 Check angles 00:26:00 SkyScan query 00:26:00 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 00:26:00 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 00:26:00 Check angles 00:26:00 SkyScan query 00:26:01 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 00:26:01 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 00:26:01 Check angles 00:26:01 SkyScan query 00:26:02 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 00:26:02 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 00:26:02 Check angles 00:26:02 SkyScan query 00:26:02 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 00:26:02 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 00:26:03 Check angles 00:26:03 SkyScan query 00:26:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:26:03 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:26:03 Check angles 00:26:03 SkyScan query 00:26:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:26:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:26:04 Message to Master queued w/err=0: serial=98777 error=0 00:26:09 Received message from Master: op=Filter serial=98778 00:26:09 Color wheel filter change from 0 to 0 00:26:09 FLIGetFilterPos err=0 currentPosition=0 00:26:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:26:09 Filter is already there-color wheel unchanged [UTC 2018-12-13 00:26:09] 00:26:09 Received message from Master: op=Shutter serial=98779 00:26:09 Shutter LASER close 00:26:09 Received message from Camera: op=State serial=98781 00:26:09 GetSingleValue result=40 Value=cccccccc 00:26:09 SkyScan query 00:26:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:26:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:10 Parameters OK 00:26:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:10 Set A/D data flow result=40 00:26:10 Set A/D channel type result=40 00:26:10 Set A/D encoding result=40 00:26:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:10 Set channel filter=0.000000e+000 result=40 00:26:10 Config A/D Result=40 00:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:10 Get A/D filter: -9.255963e+061 result=40 00:26:10 Get A/D value=-858993460 result=40 00:26:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:10 Parameters OK 00:26:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:10 Set A/D data flow result=40 00:26:10 Set A/D channel type result=40 00:26:10 Set A/D encoding result=40 00:26:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:10 Set channel filter=0.000000e+000 result=40 00:26:10 Config A/D Result=40 00:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:10 Get A/D filter: -9.255963e+061 result=40 00:26:10 Get A/D value=-858993460 result=40 00:26:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:26:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:26:10 Aux= 00:26:10 Message to Camera, serial 98781 queued 00:26:47 Received message from Master: op=PointingHead serial=98794 00:26:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:26:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:26:47 Point started: ret=0 00:26:47 point_skyscan result=0 00:26:48 Check angles 00:26:48 SkyScan query 00:26:48 SkyScan query done: ret=0 az=152.955<-10197 ze=8.64<-11424 Statuses=0009 0009 00:26:48 Msec=0 True Az=152.955 Ze=8.64 Az status=0009 Ze status=0009 00:26:48 Check angles 00:26:48 SkyScan query 00:26:49 SkyScan query done: ret=0 az=135.555<-9037 ze=-12.285<-12819 Statuses=0009 0009 00:26:49 Msec=750 True Az=135.555 Ze=-12.285 Az status=0009 Ze status=0009 00:26:49 Check angles 00:26:49 SkyScan query 00:26:50 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.24<-14216 Statuses=0009 0009 00:26:50 Msec=1500 True Az=118.02 Ze=-33.24 Az status=0009 Ze status=0009 00:26:50 Check angles 00:26:50 SkyScan query 00:26:50 SkyScan query done: ret=0 az=100.65<-6710 ze=-51.525<-15435 Statuses=0009 0009 00:26:50 Msec=2250 True Az=100.65 Ze=-51.525 Az status=0009 Ze status=0009 00:26:51 Check angles 00:26:51 SkyScan query 00:26:51 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 00:26:51 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 00:26:51 Check angles 00:26:51 SkyScan query 00:26:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:26:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:26:52 Message to Master queued w/err=0: serial=98794 error=0 00:26:57 Received message from Master: op=Filter serial=98795 00:26:57 Color wheel filter change from 0 to 0 00:26:57 FLIGetFilterPos err=0 currentPosition=0 00:26:57 FLIGetStepsRemaining err=0 RemainingSteps=0 00:26:57 Filter is already there-color wheel unchanged 00:26:57 Received message from Master: op=Shutter serial=98796 00:26:57 Shutter LASER close 00:26:57 Received message from Camera: op=State serial=98798 00:26:57 GetSingleValue result=40 Value=cccccccc 00:26:57 SkyScan query 00:26:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:26:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:58 Parameters OK 00:26:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:58 Set A/D data flow result=40 00:26:58 Set A/D channel type result=40 00:26:58 Set A/D encoding result=40 00:26:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:58 Set channel filter=0.000000e+000 result=40 00:26:58 Config A/D Result=40 00:26:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:58 Get A/D filter: -9.255963e+061 result=40 00:26:58 Get A/D value=-858993460 result=40 00:26:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:58 Parameters OK 00:26:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:58 Set A/D data flow result=40 00:26:58 Set A/D channel type result=40 00:26:58 Set A/D encoding result=40 00:26:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:58 Set channel filter=0.000000e+000 result=40 00:26:58 Config A/D Result=40 00:26:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:58 Get A/D filter: -9.255963e+061 result=40 00:26:58 Get A/D value=-858993460 result=40 00:26:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:26:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:26:58 Aux= 00:26:58 Message to Camera, serial 98798 queued 00:27:35 Received message from Master: op=PointingHead serial=98811 00:27:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:27:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:27:35 Point started: ret=0 00:27:35 point_skyscan result=0 00:27:36 Check angles 00:27:36 SkyScan query 00:27:36 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.12<-17408 Statuses=0009 0009 00:27:36 Msec=0 True Az=108.885 Ze=-81.12 Az status=0009 Ze status=0009 00:27:36 Check angles 00:27:36 SkyScan query 00:27:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 00:27:37 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 00:27:37 Check angles 00:27:37 SkyScan query 00:27:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 00:27:38 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 00:27:38 Check angles 00:27:38 SkyScan query 00:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 00:27:39 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 00:27:39 Check angles 00:27:39 SkyScan query 00:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 00:27:39 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 00:27:39 Check angles 00:27:39 SkyScan query 00:27:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:27:40 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:27:40 Message to Master queued w/err=0: serial=98811 error=0 00:27:45 Received message from Master: op=Filter serial=98812 00:27:45 Color wheel filter change from 0 to 0 00:27:45 FLIGetFilterPos err=0 currentPosition=0 00:27:45 FLIGetStepsRemaining err=0 RemainingSteps=0 00:27:45 Filter is already there-color wheel unchanged 00:27:45 Received message from Master: op=Shutter serial=98813 00:27:45 Shutter LASER open 00:27:45 Received message from Camera: op=State serial=98815 00:27:45 GetSingleValue result=40 Value=cccccccc 00:27:45 SkyScan query 00:27:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:27:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:46 Parameters OK 00:27:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:46 Set A/D data flow result=40 00:27:46 Set A/D channel type result=40 00:27:46 Set A/D encoding result=40 00:27:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:46 Set channel filter=0.000000e+000 result=40 00:27:46 Config A/D Result=40 00:27:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:46 Get A/D filter: -9.255963e+061 result=40 00:27:46 Get A/D value=-858993460 result=40 00:27:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:46 Parameters OK 00:27:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:46 Set A/D data flow result=40 00:27:46 Set A/D channel type result=40 00:27:46 Set A/D encoding result=40 00:27:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:46 Set channel filter=0.000000e+000 result=40 00:27:46 Config A/D Result=40 00:27:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:46 Get A/D filter: -9.255963e+061 result=40 00:27:46 Get A/D value=-858993460 result=40 00:27:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:27:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:27:46 Aux= 00:27:46 Message to Camera, serial 98815 queued 00:27:53 Received message from Master: op=Shutter serial=98824 00:27:53 Shutter LASER close 00:27:54 Received message from Master: op=PointingHead serial=98828 00:27:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:27:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:27:54 Point started: ret=0 00:27:54 point_skyscan result=0 00:27:55 Check angles 00:27:55 SkyScan query 00:27:56 SkyScan query done: ret=0 az=89.655<-5977 ze=157.005<-1533 Statuses=0009 0009 00:27:56 Msec=0 True Az=89.655 Ze=157.005 Az status=0009 Ze status=0009 00:27:56 Check angles 00:27:56 SkyScan query 00:27:56 SkyScan query done: ret=0 az=72.225<-4815 ze=136.02<-2932 Statuses=0009 0009 00:27:56 Msec=750 True Az=72.225 Ze=136.02 Az status=0009 Ze status=0009 00:27:57 Check angles 00:27:57 SkyScan query 00:27:57 SkyScan query done: ret=0 az=54.84<-3656 ze=115.11<-4326 Statuses=0009 0009 00:27:57 Msec=1500 True Az=54.84 Ze=115.11 Az status=0009 Ze status=0009 00:27:57 Check angles 00:27:57 SkyScan query 00:27:58 SkyScan query done: ret=0 az=40.875<-2725 ze=94.08<-5728 Statuses=0009 0009 00:27:58 Msec=2250 True Az=40.875 Ze=94.08 Az status=0009 Ze status=0009 00:27:58 Check angles 00:27:58 SkyScan query 00:27:59 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 00:27:59 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 00:27:59 Check angles 00:27:59 SkyScan query 00:27:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 00:27:59 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 00:28:00 Check angles 00:28:00 SkyScan query 00:28:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:28:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:28:00 Message to Master queued w/err=0: serial=98828 error=0 00:28:05 Received message from Master: op=Filter serial=98829 00:28:05 Color wheel filter change from 0 to 0 00:28:05 FLIGetFilterPos err=0 currentPosition=0 00:28:05 FLIGetStepsRemaining err=0 RemainingSteps=0 00:28:05 Filter is already there-color wheel unchanged 00:28:05 Received message from Master: op=Shutter serial=98830 00:28:05 Shutter LASER close 00:28:05 Received message from Camera: op=State serial=98832 00:28:05 GetSingleValue result=40 Value=cccccccc 00:28:05 SkyScan query 00:28:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:28:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:06 Parameters OK 00:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:06 Set A/D data flow result=40 00:28:06 Set A/D channel type result=40 00:28:06 Set A/D encoding result=40 00:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:06 Set channel filter=0.000000e+000 result=40 00:28:06 Config A/D Result=40 00:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:06 Get A/D filter: -9.255963e+061 result=40 00:28:06 Get A/D value=-858993460 result=40 00:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:06 Parameters OK 00:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:06 Set A/D data flow result=40 00:28:06 Set A/D channel type result=40 00:28:06 Set A/D encoding result=40 00:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:06 Set channel filter=0.000000e+000 result=40 00:28:06 Config A/D Result=40 00:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:06 Get A/D filter: -9.255963e+061 result=40 00:28:06 Get A/D value=-858993460 result=40 00:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:28:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:28:06 Aux= 00:28:06 Message to Camera, serial 98832 queued 00:28:43 Received message from Master: op=PointingHead serial=98845 00:28:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:28:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:28:43 Point started: ret=0 00:28:43 point_skyscan result=0 00:28:44 Check angles 00:28:44 SkyScan query 00:28:45 SkyScan query done: ret=0 az=40.995<-2733 ze=21.78<-10548 Statuses=0008 0009 00:28:45 Msec=0 True Az=40.995 Ze=21.78 Az status=0008 Ze status=0009 00:28:45 Check angles 00:28:45 SkyScan query 00:28:45 SkyScan query done: ret=0 az=40.995<-2733 ze=0.405<-11973 Statuses=0008 0009 00:28:45 Msec=750 True Az=40.995 Ze=0.405 Az status=0008 Ze status=0009 00:28:46 Check angles 00:28:46 SkyScan query 00:28:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.97<-13398 Statuses=0008 0009 00:28:46 Msec=1500 True Az=40.995 Ze=-20.97 Az status=0008 Ze status=0009 00:28:46 Check angles 00:28:46 SkyScan query 00:28:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:28:47 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:28:47 Check angles 00:28:47 SkyScan query 00:28:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:28:48 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:28:48 Message to Master queued w/err=0: serial=98845 error=0 00:28:53 Received message from Master: op=Filter serial=98846 00:28:53 Color wheel filter change from 0 to 0 00:28:53 FLIGetFilterPos err=0 currentPosition=0 00:28:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:28:53 Filter is already there-color wheel unchanged 00:28:53 Received message from Master: op=Shutter serial=98847 00:28:53 Shutter LASER close 00:28:53 Received message from Camera: op=State serial=98849 00:28:53 GetSingleValue result=40 Value=cccccccc 00:28:53 SkyScan query 00:28:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:28:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:54 Parameters OK 00:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:54 Set A/D data flow result=40 00:28:54 Set A/D channel type result=40 00:28:54 Set A/D encoding result=40 00:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:54 Set channel filter=0.000000e+000 result=40 00:28:54 Config A/D Result=40 00:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:54 Get A/D filter: -9.255963e+061 result=40 00:28:54 Get A/D value=-858993460 result=40 00:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:54 Parameters OK 00:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:54 Set A/D data flow result=40 00:28:54 Set A/D channel type result=40 00:28:54 Set A/D encoding result=40 00:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:54 Set channel filter=0.000000e+000 result=40 00:28:54 Config A/D Result=40 00:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:54 Get A/D filter: -9.255963e+061 result=40 00:28:54 Get A/D value=-858993460 result=40 00:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:28:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:28:54 Aux= 00:28:54 Message to Camera, serial 98849 queued 00:29:30 Received message from Master: op=PointingHead serial=98862 00:29:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:29:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:29:31 Point started: ret=0 00:29:31 point_skyscan result=0 00:29:31 Check angles 00:29:31 SkyScan query 00:29:32 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.28<-16552 Statuses=0009 0009 00:29:32 Msec=0 True Az=63.855 Ze=-68.28 Az status=0009 Ze status=0009 00:29:32 Check angles 00:29:32 SkyScan query 00:29:33 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.235<-17949 Statuses=0009 0009 00:29:33 Msec=750 True Az=81.39 Ze=-89.235 Az status=0009 Ze status=0009 00:29:33 Check angles 00:29:33 SkyScan query 00:29:34 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.175<-19345 Statuses=0009 0009 00:29:34 Msec=1500 True Az=99.06 Ze=-110.175 Az status=0009 Ze status=0009 00:29:34 Check angles 00:29:34 SkyScan query 00:29:34 SkyScan query done: ret=0 az=116.295<-7753 ze=-131.13<-20742 Statuses=0009 0009 00:29:34 Msec=2250 True Az=116.295 Ze=-131.13 Az status=0009 Ze status=0009 00:29:34 Check angles 00:29:34 SkyScan query 00:29:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 00:29:35 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 00:29:35 Check angles 00:29:35 SkyScan query 00:29:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:29:36 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:29:36 Message to Master queued w/err=0: serial=98862 error=0 00:29:41 Received message from Master: op=Filter serial=98863 00:29:41 Color wheel filter change from 0 to 0 00:29:41 FLIGetFilterPos err=0 currentPosition=0 00:29:41 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:41 Filter is already there-color wheel unchanged 00:29:41 Received message from Master: op=Shutter serial=98864 00:29:41 Shutter LASER close 00:29:41 Received message from Camera: op=State serial=98866 00:29:41 GetSingleValue result=40 Value=cccccccc 00:29:41 SkyScan query 00:29:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:29:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:42 Parameters OK 00:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:42 Set A/D data flow result=40 00:29:42 Set A/D channel type result=40 00:29:42 Set A/D encoding result=40 00:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:42 Set channel filter=0.000000e+000 result=40 00:29:42 Config A/D Result=40 00:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:42 Get A/D filter: -9.255963e+061 result=40 00:29:42 Get A/D value=-858993460 result=40 00:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:42 Parameters OK 00:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:42 Set A/D data flow result=40 00:29:42 Set A/D channel type result=40 00:29:42 Set A/D encoding result=40 00:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:42 Set channel filter=0.000000e+000 result=40 00:29:42 Config A/D Result=40 00:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:42 Get A/D filter: -9.255963e+061 result=40 00:29:42 Get A/D value=-858993460 result=40 00:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:42 Aux= 00:29:42 Message to Camera, serial 98866 queued 00:30:18 Received message from Master: op=PointingHead serial=98879 00:30:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:30:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:30:19 Point started: ret=0 00:30:19 point_skyscan result=0 00:30:20 Check angles 00:30:20 SkyScan query 00:30:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 00:30:20 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 00:30:20 Check angles 00:30:20 SkyScan query 00:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:30:21 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:30:21 Message to Master queued w/err=0: serial=98879 error=0 00:30:26 Received message from Master: op=Filter serial=98880 00:30:26 Color wheel filter change from 0 to 0 00:30:26 FLIGetFilterPos err=0 currentPosition=0 00:30:26 FLIGetStepsRemaining err=0 RemainingSteps=0 00:30:26 Filter is already there-color wheel unchanged 00:30:26 Received message from Master: op=Shutter serial=98881 00:30:26 Shutter LASER open 00:30:26 Received message from Camera: op=State serial=98883 00:30:26 GetSingleValue result=40 Value=cccccccc 00:30:26 SkyScan query 00:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:30:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:27 Parameters OK 00:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:27 Set A/D data flow result=40 00:30:27 Set A/D channel type result=40 00:30:27 Set A/D encoding result=40 00:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:27 Set channel filter=0.000000e+000 result=40 00:30:27 Config A/D Result=40 00:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:27 Get A/D filter: -9.255963e+061 result=40 00:30:27 Get A/D value=-858993460 result=40 00:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:27 Parameters OK 00:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:27 Set A/D data flow result=40 00:30:27 Set A/D channel type result=40 00:30:27 Set A/D encoding result=40 00:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:27 Set channel filter=0.000000e+000 result=40 00:30:27 Config A/D Result=40 00:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:27 Get A/D filter: -9.255963e+061 result=40 00:30:27 Get A/D value=-858993460 result=40 00:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:30:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:30:27 Aux= 00:30:27 Message to Camera, serial 98883 queued 00:30:34 Received message from Master: op=Shutter serial=98892 00:30:34 Shutter LASER close 00:30:35 Received message from Master: op=PointingHead serial=98896 00:30:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:30:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:30:35 Point started: ret=0 00:30:35 point_skyscan result=0 00:30:36 Check angles 00:30:36 SkyScan query 00:30:37 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.28<-21552 Statuses=0009 0009 00:30:37 Msec=0 True Az=135.9 Ze=-143.28 Az status=0009 Ze status=0009 00:30:37 Check angles 00:30:37 SkyScan query 00:30:37 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.295<-20153 Statuses=0009 0009 00:30:37 Msec=750 True Az=153.42 Ze=-122.295 Az status=0009 Ze status=0009 00:30:37 Check angles 00:30:37 SkyScan query 00:30:38 SkyScan query done: ret=0 az=170.865<-11391 ze=-101.415<-18761 Statuses=0009 0009 00:30:38 Msec=1500 True Az=170.865 Ze=-101.415 Az status=0009 Ze status=0009 00:30:38 Check angles 00:30:38 SkyScan query 00:30:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.4<-17360 Statuses=0008 0009 00:30:39 Msec=2250 True Az=176.01 Ze=-80.4 Az status=0008 Ze status=0009 00:30:39 Check angles 00:30:39 SkyScan query 00:30:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.475<-15965 Statuses=0008 0009 00:30:40 Msec=3000 True Az=176.01 Ze=-59.475 Az status=0008 Ze status=0009 00:30:40 Check angles 00:30:40 SkyScan query 00:30:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:30:40 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:30:40 Message to Master queued w/err=0: serial=98896 error=0 00:30:45 Received message from Master: op=Filter serial=98897 00:30:45 Color wheel filter change from 0 to 0 00:30:45 FLIGetFilterPos err=0 currentPosition=0 00:30:45 FLIGetStepsRemaining err=0 RemainingSteps=0 00:30:45 Filter is already there-color wheel unchanged 00:30:45 Received message from Master: op=Shutter serial=98898 00:30:45 Shutter LASER close 00:30:46 Received message from Camera: op=State serial=98900 00:30:46 GetSingleValue result=40 Value=cccccccc 00:30:46 SkyScan query 00:30:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:30:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:46 Parameters OK 00:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:46 Set A/D data flow result=40 00:30:46 Set A/D channel type result=40 00:30:46 Set A/D encoding result=40 00:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:46 Set channel filter=0.000000e+000 result=40 00:30:46 Config A/D Result=40 00:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:46 Get A/D filter: -9.255963e+061 result=40 00:30:46 Get A/D value=-858993460 result=40 00:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:46 Parameters OK 00:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:46 Set A/D data flow result=40 00:30:46 Set A/D channel type result=40 00:30:46 Set A/D encoding result=40 00:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:46 Set channel filter=0.000000e+000 result=40 00:30:46 Config A/D Result=40 00:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:46 Get A/D filter: -9.255963e+061 result=40 00:30:46 Get A/D value=-858993460 result=40 00:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:30:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:30:46 Aux= 00:30:46 Message to Camera, serial 98900 queued 00:31:23 Received message from Master: op=PointingHead serial=98913 00:31:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:31:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:31:23 Point started: ret=0 00:31:23 point_skyscan result=0 00:31:24 Check angles 00:31:24 SkyScan query 00:31:25 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.69<-13446 Statuses=0009 0009 00:31:25 Msec=0 True Az=152.925 Ze=-21.69 Az status=0009 Ze status=0009 00:31:25 Check angles 00:31:25 SkyScan query 00:31:25 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.255<-12017 Statuses=0009 0009 00:31:25 Msec=750 True Az=135.12 Ze=-0.255 Az status=0009 Ze status=0009 00:31:26 Check angles 00:31:26 SkyScan query 00:31:26 SkyScan query done: ret=0 az=117.585<-7839 ze=20.685<-10621 Statuses=0009 0009 00:31:26 Msec=1500 True Az=117.585 Ze=20.685 Az status=0009 Ze status=0009 00:31:26 Check angles 00:31:26 SkyScan query 00:31:27 SkyScan query done: ret=0 az=100.215<-6681 ze=41.685<-9221 Statuses=0009 0009 00:31:27 Msec=2250 True Az=100.215 Ze=41.685 Az status=0009 Ze status=0009 00:31:27 Check angles 00:31:27 SkyScan query 00:31:28 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 00:31:28 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 00:31:28 Check angles 00:31:28 SkyScan query 00:31:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:31:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:31:29 Message to Master queued w/err=0: serial=98913 error=0 00:31:34 Received message from Master: op=Filter serial=98914 00:31:34 Color wheel filter change from 0 to 0 00:31:34 FLIGetFilterPos err=0 currentPosition=0 00:31:34 FLIGetStepsRemaining err=0 RemainingSteps=0 00:31:34 Filter is already there-color wheel unchanged 00:31:34 Received message from Master: op=Shutter serial=98915 00:31:34 Shutter LASER close 00:31:34 Received message from Camera: op=State serial=98917 00:31:34 GetSingleValue result=40 Value=cccccccc 00:31:34 SkyScan query 00:31:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:31:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:34 Parameters OK 00:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:34 Set A/D data flow result=40 00:31:34 Set A/D channel type result=40 00:31:34 Set A/D encoding result=40 00:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:34 Set channel filter=0.000000e+000 result=40 00:31:34 Config A/D Result=40 00:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:34 Get A/D filter: -9.255963e+061 result=40 00:31:34 Get A/D value=-858993460 result=40 00:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:34 Parameters OK 00:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:34 Set A/D data flow result=40 00:31:34 Set A/D channel type result=40 00:31:34 Set A/D encoding result=40 00:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:34 Set channel filter=0.000000e+000 result=40 00:31:34 Config A/D Result=40 00:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:34 Get A/D filter: -9.255963e+061 result=40 00:31:34 Get A/D value=-858993460 result=40 00:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:31:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:31:34 Aux= 00:31:34 Message to Camera, serial 98917 queued 00:32:11 Received message from Master: op=PointingHead serial=98930 00:32:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:32:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:32:11 Point started: ret=0 00:32:11 point_skyscan result=0 00:32:12 Check angles 00:32:12 SkyScan query 00:32:13 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 00:32:13 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 00:32:13 Check angles 00:32:13 SkyScan query 00:32:14 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 00:32:14 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 00:32:14 Check angles 00:32:14 SkyScan query 00:32:14 SkyScan query done: ret=0 az=143.805<-9587 ze=38.505<-9433 Statuses=0009 0008 00:32:14 Msec=1500 True Az=143.805 Ze=38.505 Az status=0009 Ze status=0008 00:32:14 Check angles 00:32:14 SkyScan query 00:32:15 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 00:32:15 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 00:32:15 Check angles 00:32:15 SkyScan query 00:32:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:32:16 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:32:16 Check angles 00:32:16 SkyScan query 00:32:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:32:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:32:17 Message to Master queued w/err=0: serial=98930 error=0 00:32:22 Received message from Master: op=Filter serial=98931 00:32:22 Color wheel filter change from 0 to 0 00:32:22 FLIGetFilterPos err=0 currentPosition=0 00:32:22 FLIGetStepsRemaining err=0 RemainingSteps=0 00:32:22 Filter is already there-color wheel unchanged 00:32:22 Received message from Master: op=Shutter serial=98932 00:32:22 Shutter LASER close 00:32:22 Received message from Camera: op=State serial=98934 00:32:22 GetSingleValue result=40 Value=cccccccc 00:32:22 SkyScan query 00:32:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:32:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:22 Parameters OK 00:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:22 Set A/D data flow result=40 00:32:22 Set A/D channel type result=40 00:32:22 Set A/D encoding result=40 00:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:22 Set channel filter=0.000000e+000 result=40 00:32:22 Config A/D Result=40 00:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:22 Get A/D filter: -9.255963e+061 result=40 00:32:22 Get A/D value=-858993460 result=40 00:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:22 Parameters OK 00:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:22 Set A/D data flow result=40 00:32:22 Set A/D channel type result=40 00:32:22 Set A/D encoding result=40 00:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:22 Set channel filter=0.000000e+000 result=40 00:32:22 Config A/D Result=40 00:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:22 Get A/D filter: -9.255963e+061 result=40 00:32:22 Get A/D value=-858993460 result=40 00:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:32:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:32:22 Aux= 00:32:22 Message to Camera, serial 98934 queued 00:32:59 Received message from Master: op=PointingHead serial=98947 00:32:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:32:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:33:00 Point started: ret=0 00:33:00 point_skyscan result=0 00:33:00 Check angles 00:33:00 SkyScan query 00:33:01 SkyScan query done: ret=0 az=152.775<-10185 ze=8.385<-11441 Statuses=0009 0009 00:33:01 Msec=0 True Az=152.775 Ze=8.385 Az status=0009 Ze status=0009 00:33:01 Check angles 00:33:01 SkyScan query 00:33:02 SkyScan query done: ret=0 az=135.195<-9013 ze=-12.6<-12840 Statuses=0009 0009 00:33:02 Msec=750 True Az=135.195 Ze=-12.6 Az status=0009 Ze status=0009 00:33:02 Check angles 00:33:02 SkyScan query 00:33:02 SkyScan query done: ret=0 az=117.72<-7848 ze=-33.525<-14235 Statuses=0009 0009 00:33:02 Msec=1500 True Az=117.72 Ze=-33.525 Az status=0009 Ze status=0009 00:33:03 Check angles 00:33:03 SkyScan query 00:33:03 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 00:33:03 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 00:33:03 Check angles 00:33:03 SkyScan query 00:33:04 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 00:33:04 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 00:33:04 Check angles 00:33:04 SkyScan query 00:33:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:33:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:33:05 Message to Master queued w/err=0: serial=98947 error=0 00:33:10 Received message from Master: op=Filter serial=98948 00:33:10 Color wheel filter change from 0 to 0 00:33:10 FLIGetFilterPos err=0 currentPosition=0 00:33:10 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:10 Filter is already there-color wheel unchanged 00:33:10 Received message from Master: op=Shutter serial=98949 00:33:10 Shutter LASER close 00:33:10 Received message from Camera: op=State serial=98951 00:33:10 GetSingleValue result=40 Value=cccccccc 00:33:10 SkyScan query 00:33:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:33:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:10 Parameters OK 00:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:10 Set A/D data flow result=40 00:33:10 Set A/D channel type result=40 00:33:10 Set A/D encoding result=40 00:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:10 Set channel filter=0.000000e+000 result=40 00:33:10 Config A/D Result=40 00:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:10 Get A/D filter: -9.255963e+061 result=40 00:33:10 Get A/D value=-858993460 result=40 00:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:10 Parameters OK 00:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:10 Set A/D data flow result=40 00:33:10 Set A/D channel type result=40 00:33:10 Set A/D encoding result=40 00:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:10 Set channel filter=0.000000e+000 result=40 00:33:10 Config A/D Result=40 00:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:10 Get A/D filter: -9.255963e+061 result=40 00:33:10 Get A/D value=-858993460 result=40 00:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:10 Aux= 00:33:10 Message to Camera, serial 98951 queued 00:33:47 Received message from Master: op=PointingHead serial=98964 00:33:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:33:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:33:48 Point started: ret=0 00:33:48 point_skyscan result=0 00:33:48 Check angles 00:33:48 SkyScan query 00:33:49 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.405<-17427 Statuses=0009 0009 00:33:49 Msec=0 True Az=109.125 Ze=-81.405 Az status=0009 Ze status=0009 00:33:49 Check angles 00:33:49 SkyScan query 00:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 00:33:50 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 00:33:50 Check angles 00:33:50 SkyScan query 00:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 00:33:50 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 00:33:51 Check angles 00:33:51 SkyScan query 00:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 00:33:51 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 00:33:51 Check angles 00:33:51 SkyScan query 00:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 00:33:52 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 00:33:52 Check angles 00:33:52 SkyScan query 00:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:33:53 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:33:53 Message to Master queued w/err=0: serial=98964 error=0 00:33:58 Received message from Master: op=Filter serial=98965 00:33:58 Color wheel filter change from 0 to 0 00:33:58 FLIGetFilterPos err=0 currentPosition=0 00:33:58 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:58 Filter is already there-color wheel unchanged 00:33:58 Received message from Master: op=Shutter serial=98966 00:33:58 Shutter LASER open 00:33:58 Received message from Camera: op=State serial=98968 00:33:58 GetSingleValue result=40 Value=cccccccc 00:33:58 SkyScan query 00:33:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:33:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:59 Parameters OK 00:33:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:59 Set A/D data flow result=40 00:33:59 Set A/D channel type result=40 00:33:59 Set A/D encoding result=40 00:33:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:59 Set channel filter=0.000000e+000 result=40 00:33:59 Config A/D Result=40 00:33:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:59 Get A/D filter: -9.255963e+061 result=40 00:33:59 Get A/D value=-858993460 result=40 00:33:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:59 Parameters OK 00:33:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:59 Set A/D data flow result=40 00:33:59 Set A/D channel type result=40 00:33:59 Set A/D encoding result=40 00:33:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:59 Set channel filter=0.000000e+000 result=40 00:33:59 Config A/D Result=40 00:33:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:59 Get A/D filter: -9.255963e+061 result=40 00:33:59 Get A/D value=-858993460 result=40 00:33:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:59 Aux= 00:33:59 Message to Camera, serial 98968 queued 00:34:07 Received message from Master: op=Shutter serial=98978 00:34:07 Shutter LASER close 00:34:07 Received message from Master: op=PointingHead serial=98982 00:34:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:34:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:34:08 Point started: ret=0 00:34:08 point_skyscan result=0 00:34:09 Check angles 00:34:09 SkyScan query 00:34:09 SkyScan query done: ret=0 az=89.895<-5993 ze=157.2<-1520 Statuses=0009 0009 00:34:09 Msec=0 True Az=89.895 Ze=157.2 Az status=0009 Ze status=0009 00:34:09 Check angles 00:34:09 SkyScan query 00:34:10 SkyScan query done: ret=0 az=72.33<-4822 ze=136.17<-2922 Statuses=0009 0009 00:34:10 Msec=750 True Az=72.33 Ze=136.17 Az status=0009 Ze status=0009 00:34:10 Check angles 00:34:10 SkyScan query 00:34:11 SkyScan query done: ret=0 az=55.005<-3667 ze=115.305<-4313 Statuses=0009 0009 00:34:11 Msec=1500 True Az=55.005 Ze=115.305 Az status=0009 Ze status=0009 00:34:11 Check angles 00:34:11 SkyScan query 00:34:11 SkyScan query done: ret=0 az=40.845<-2723 ze=94.335<-5711 Statuses=0009 0009 00:34:11 Msec=2250 True Az=40.845 Ze=94.335 Az status=0009 Ze status=0009 00:34:12 Check angles 00:34:12 SkyScan query 00:34:12 SkyScan query done: ret=0 az=40.995<-2733 ze=73.365<-7109 Statuses=0008 0009 00:34:12 Msec=3000 True Az=40.995 Ze=73.365 Az status=0008 Ze status=0009 00:34:12 Check angles 00:34:12 SkyScan query 00:34:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 00:34:13 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 00:34:13 Check angles 00:34:13 SkyScan query 00:34:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:34:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:34:14 Message to Master queued w/err=0: serial=98982 error=0 00:34:19 Received message from Master: op=Filter serial=98983 00:34:19 Color wheel filter change from 0 to 0 00:34:19 FLIGetFilterPos err=0 currentPosition=0 00:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 00:34:19 Filter is already there-color wheel unchanged 00:34:19 Received message from Master: op=Shutter serial=98984 00:34:19 Shutter LASER close 00:34:19 Received message from Camera: op=State serial=98986 00:34:19 GetSingleValue result=40 Value=cccccccc 00:34:19 SkyScan query 00:34:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:20 Parameters OK 00:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:20 Set A/D data flow result=40 00:34:20 Set A/D channel type result=40 00:34:20 Set A/D encoding result=40 00:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:20 Set channel filter=0.000000e+000 result=40 00:34:20 Config A/D Result=40 00:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:20 Get A/D filter: -9.255963e+061 result=40 00:34:20 Get A/D value=-858993460 result=40 00:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:20 Parameters OK 00:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:20 Set A/D data flow result=40 00:34:20 Set A/D channel type result=40 00:34:20 Set A/D encoding result=40 00:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:20 Set channel filter=0.000000e+000 result=40 00:34:20 Config A/D Result=40 00:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:20 Get A/D filter: -9.255963e+061 result=40 00:34:20 Get A/D value=-858993460 result=40 00:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:34:20 Aux= 00:34:20 Message to Camera, serial 98986 queued 00:34:57 Received message from Master: op=PointingHead serial=98999 00:34:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:34:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:34:57 Point started: ret=0 00:34:57 point_skyscan result=0 00:34:58 Check angles 00:34:58 SkyScan query 00:34:58 SkyScan query done: ret=0 az=40.995<-2733 ze=21.135<-10591 Statuses=0008 0009 00:34:58 Msec=0 True Az=40.995 Ze=21.135 Az status=0008 Ze status=0009 00:34:58 Check angles 00:34:58 SkyScan query 00:34:59 SkyScan query done: ret=0 az=40.995<-2733 ze=0.18<-11988 Statuses=0008 0009 00:34:59 Msec=750 True Az=40.995 Ze=0.18 Az status=0008 Ze status=0009 00:34:59 Check angles 00:34:59 SkyScan query 00:35:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.76<-13384 Statuses=0008 0009 00:35:00 Msec=1500 True Az=40.995 Ze=-20.76 Az status=0008 Ze status=0009 00:35:00 Check angles 00:35:00 SkyScan query 00:35:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:35:01 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:35:01 Check angles 00:35:01 SkyScan query 00:35:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:35:01 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:35:01 Message to Master queued w/err=0: serial=98999 error=0 00:35:06 Received message from Master: op=Filter serial=99000 00:35:06 Color wheel filter change from 0 to 0 00:35:06 FLIGetFilterPos err=0 currentPosition=0 00:35:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:35:06 Filter is already there-color wheel unchanged 00:35:06 Received message from Master: op=Shutter serial=99001 00:35:06 Shutter LASER close 00:35:07 Received message from Camera: op=State serial=99003 00:35:07 GetSingleValue result=40 Value=cccccccc 00:35:07 SkyScan query 00:35:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:35:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:07 Parameters OK 00:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:07 Set A/D data flow result=40 00:35:07 Set A/D channel type result=40 00:35:07 Set A/D encoding result=40 00:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:07 Set channel filter=0.000000e+000 result=40 00:35:07 Config A/D Result=40 00:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:07 Get A/D filter: -9.255963e+061 result=40 00:35:07 Get A/D value=-858993460 result=40 00:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:07 Parameters OK 00:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:07 Set A/D data flow result=40 00:35:07 Set A/D channel type result=40 00:35:07 Set A/D encoding result=40 00:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:07 Set channel filter=0.000000e+000 result=40 00:35:07 Config A/D Result=40 00:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:07 Get A/D filter: -9.255963e+061 result=40 00:35:07 Get A/D value=-858993460 result=40 00:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:35:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:35:07 Aux= 00:35:07 Message to Camera, serial 99003 queued 00:35:44 Received message from Master: op=PointingHead serial=99016 00:35:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:35:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:35:44 Point started: ret=0 00:35:44 point_skyscan result=0 00:35:45 Check angles 00:35:45 SkyScan query 00:35:46 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.115<-16541 Statuses=0009 0009 00:35:46 Msec=0 True Az=63.78 Ze=-68.115 Az status=0009 Ze status=0009 00:35:46 Check angles 00:35:46 SkyScan query 00:35:46 SkyScan query done: ret=0 az=81.24<-5416 ze=-89.07<-17938 Statuses=0009 0009 00:35:46 Msec=750 True Az=81.24 Ze=-89.07 Az status=0009 Ze status=0009 00:35:47 Check angles 00:35:47 SkyScan query 00:35:47 SkyScan query done: ret=0 az=98.82<-6588 ze=-109.995<-19333 Statuses=0009 0009 00:35:47 Msec=1500 True Az=98.82 Ze=-109.995 Az status=0009 Ze status=0009 00:35:47 Check angles 00:35:47 SkyScan query 00:35:48 SkyScan query done: ret=0 az=116.175<-7745 ze=-130.965<-20731 Statuses=0009 0009 00:35:48 Msec=2250 True Az=116.175 Ze=-130.965 Az status=0009 Ze status=0009 00:35:48 Check angles 00:35:48 SkyScan query 00:35:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 00:35:49 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 00:35:49 Check angles 00:35:49 SkyScan query 00:35:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:35:49 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:35:49 Message to Master queued w/err=0: serial=99016 error=0 [UTC 2018-12-13 00:35:53] 00:35:54 Received message from Master: op=Filter serial=99017 00:35:54 Color wheel filter change from 0 to 0 00:35:54 FLIGetFilterPos err=0 currentPosition=0 00:35:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:35:54 Filter is already there-color wheel unchanged 00:35:55 Received message from Master: op=Shutter serial=99018 00:35:55 Shutter LASER close 00:35:55 Received message from Camera: op=State serial=99020 00:35:55 GetSingleValue result=40 Value=cccccccc 00:35:55 SkyScan query 00:35:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:35:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:55 Parameters OK 00:35:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:55 Set A/D data flow result=40 00:35:55 Set A/D channel type result=40 00:35:55 Set A/D encoding result=40 00:35:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:55 Set channel filter=0.000000e+000 result=40 00:35:55 Config A/D Result=40 00:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:55 Get A/D filter: -9.255963e+061 result=40 00:35:55 Get A/D value=-858993460 result=40 00:35:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:55 Parameters OK 00:35:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:55 Set A/D data flow result=40 00:35:55 Set A/D channel type result=40 00:35:55 Set A/D encoding result=40 00:35:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:55 Set channel filter=0.000000e+000 result=40 00:35:55 Config A/D Result=40 00:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:55 Get A/D filter: -9.255963e+061 result=40 00:35:55 Get A/D value=-858993460 result=40 00:35:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:35:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:35:55 Aux= 00:35:55 Message to Camera, serial 99020 queued 00:36:32 Received message from Master: op=PointingHead serial=99033 00:36:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:36:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:36:32 Point started: ret=0 00:36:32 point_skyscan result=0 00:36:33 Check angles 00:36:33 SkyScan query 00:36:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 00:36:34 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 00:36:34 Check angles 00:36:34 SkyScan query 00:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:36:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:36:34 Message to Master queued w/err=0: serial=99033 error=0 00:36:39 Received message from Master: op=Filter serial=99034 00:36:39 Color wheel filter change from 0 to 0 00:36:39 FLIGetFilterPos err=0 currentPosition=0 00:36:39 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:39 Filter is already there-color wheel unchanged 00:36:40 Received message from Master: op=Shutter serial=99035 00:36:40 Shutter LASER open 00:36:40 Received message from Camera: op=State serial=99037 00:36:40 GetSingleValue result=40 Value=cccccccc 00:36:40 SkyScan query 00:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:36:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:40 Parameters OK 00:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:40 Set A/D data flow result=40 00:36:40 Set A/D channel type result=40 00:36:40 Set A/D encoding result=40 00:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:40 Set channel filter=0.000000e+000 result=40 00:36:40 Config A/D Result=40 00:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:40 Get A/D filter: -9.255963e+061 result=40 00:36:40 Get A/D value=-858993460 result=40 00:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:40 Parameters OK 00:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:40 Set A/D data flow result=40 00:36:40 Set A/D channel type result=40 00:36:40 Set A/D encoding result=40 00:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:40 Set channel filter=0.000000e+000 result=40 00:36:40 Config A/D Result=40 00:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:40 Get A/D filter: -9.255963e+061 result=40 00:36:40 Get A/D value=-858993460 result=40 00:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:40 Aux= 00:36:40 Message to Camera, serial 99037 queued 00:36:49 Received message from Master: op=Shutter serial=99047 00:36:49 Shutter LASER close 00:36:49 Received message from Master: op=PointingHead serial=99051 00:36:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:36:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:36:50 Point started: ret=0 00:36:50 point_skyscan result=0 00:36:50 Check angles 00:36:50 SkyScan query 00:36:51 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.145<-21543 Statuses=0009 0009 00:36:51 Msec=0 True Az=136.02 Ze=-143.145 Az status=0009 Ze status=0009 00:36:51 Check angles 00:36:51 SkyScan query 00:36:52 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.175<-20145 Statuses=0009 0009 00:36:52 Msec=750 True Az=153.57 Ze=-122.175 Az status=0009 Ze status=0009 00:36:52 Check angles 00:36:52 SkyScan query 00:36:53 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.8<-18720 Statuses=0009 0009 00:36:53 Msec=1500 True Az=171.435 Ze=-100.8 Az status=0009 Ze status=0009 00:36:53 Check angles 00:36:53 SkyScan query 00:36:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.425<-17295 Statuses=0008 0009 00:36:53 Msec=2250 True Az=176.01 Ze=-79.425 Az status=0008 Ze status=0009 00:36:53 Check angles 00:36:53 SkyScan query 00:36:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.41<-15894 Statuses=0008 0009 00:36:54 Msec=3000 True Az=176.01 Ze=-58.41 Az status=0008 Ze status=0009 00:36:54 Check angles 00:36:54 SkyScan query 00:36:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 00:36:55 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 00:36:55 Message to Master queued w/err=0: serial=99051 error=0 00:37:00 Received message from Master: op=Filter serial=99052 00:37:00 Color wheel filter change from 0 to 0 00:37:00 FLIGetFilterPos err=0 currentPosition=0 00:37:00 FLIGetStepsRemaining err=0 RemainingSteps=0 00:37:00 Filter is already there-color wheel unchanged 00:37:00 Received message from Master: op=Shutter serial=99053 00:37:00 Shutter LASER close 00:37:00 Received message from Camera: op=State serial=99055 00:37:00 GetSingleValue result=40 Value=cccccccc 00:37:00 SkyScan query 00:37:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:37:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:01 Parameters OK 00:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:01 Set A/D data flow result=40 00:37:01 Set A/D channel type result=40 00:37:01 Set A/D encoding result=40 00:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:01 Set channel filter=0.000000e+000 result=40 00:37:01 Config A/D Result=40 00:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:01 Get A/D filter: -9.255963e+061 result=40 00:37:01 Get A/D value=-858993460 result=40 00:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:01 Parameters OK 00:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:01 Set A/D data flow result=40 00:37:01 Set A/D channel type result=40 00:37:01 Set A/D encoding result=40 00:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:01 Set channel filter=0.000000e+000 result=40 00:37:01 Config A/D Result=40 00:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:01 Get A/D filter: -9.255963e+061 result=40 00:37:01 Get A/D value=-858993460 result=40 00:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:37:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:37:01 Aux= 00:37:01 Message to Camera, serial 99055 queued 00:37:38 Received message from Master: op=PointingHead serial=99068 00:37:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:37:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:37:38 Point started: ret=0 00:37:38 point_skyscan result=0 00:37:39 Check angles 00:37:39 SkyScan query 00:37:39 SkyScan query done: ret=0 az=152.445<-10163 ze=-21.165<-13411 Statuses=0009 0009 00:37:39 Msec=0 True Az=152.445 Ze=-21.165 Az status=0009 Ze status=0009 00:37:39 Check angles 00:37:39 SkyScan query 00:37:40 SkyScan query done: ret=0 az=134.535<-8969 ze=0.18<-11988 Statuses=0009 0009 00:37:40 Msec=750 True Az=134.535 Ze=0.18 Az status=0009 Ze status=0009 00:37:40 Check angles 00:37:40 SkyScan query 00:37:41 SkyScan query done: ret=0 az=117.105<-7807 ze=21.15<-10590 Statuses=0009 0009 00:37:41 Msec=1500 True Az=117.105 Ze=21.15 Az status=0009 Ze status=0009 00:37:41 Check angles 00:37:41 SkyScan query 00:37:41 SkyScan query done: ret=0 az=99.645<-6643 ze=42.09<-9194 Statuses=0009 0009 00:37:41 Msec=2250 True Az=99.645 Ze=42.09 Az status=0009 Ze status=0009 00:37:42 Check angles 00:37:42 SkyScan query 00:37:42 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 00:37:42 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 00:37:42 Check angles 00:37:42 SkyScan query 00:37:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:37:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:37:43 Message to Master queued w/err=0: serial=99068 error=0 00:37:48 Received message from Master: op=Filter serial=99069 00:37:48 Color wheel filter change from 0 to 0 00:37:48 FLIGetFilterPos err=0 currentPosition=0 00:37:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:37:48 Filter is already there-color wheel unchanged 00:37:48 Received message from Master: op=Shutter serial=99070 00:37:48 Shutter LASER close 00:37:48 Received message from Camera: op=State serial=99072 00:37:48 GetSingleValue result=40 Value=cccccccc 00:37:48 SkyScan query 00:37:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:37:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:49 Parameters OK 00:37:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:49 Set A/D data flow result=40 00:37:49 Set A/D channel type result=40 00:37:49 Set A/D encoding result=40 00:37:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:49 Set channel filter=0.000000e+000 result=40 00:37:49 Config A/D Result=40 00:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:49 Get A/D filter: -9.255963e+061 result=40 00:37:49 Get A/D value=-858993460 result=40 00:37:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:49 Parameters OK 00:37:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:49 Set A/D data flow result=40 00:37:49 Set A/D channel type result=40 00:37:49 Set A/D encoding result=40 00:37:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:49 Set channel filter=0.000000e+000 result=40 00:37:49 Config A/D Result=40 00:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:49 Get A/D filter: -9.255963e+061 result=40 00:37:49 Get A/D value=-858993460 result=40 00:37:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:37:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:37:49 Aux= 00:37:49 Message to Camera, serial 99072 queued 00:38:26 Received message from Master: op=PointingHead serial=99085 00:38:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:38:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:38:26 Point started: ret=0 00:38:26 point_skyscan result=0 00:38:27 Check angles 00:38:27 SkyScan query 00:38:27 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 00:38:27 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 00:38:27 Check angles 00:38:27 SkyScan query 00:38:28 SkyScan query done: ret=0 az=126.96<-8464 ze=38.505<-9433 Statuses=0009 0008 00:38:28 Msec=750 True Az=126.96 Ze=38.505 Az status=0009 Ze status=0008 00:38:28 Check angles 00:38:28 SkyScan query 00:38:29 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 00:38:29 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 00:38:29 Check angles 00:38:29 SkyScan query 00:38:30 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 00:38:30 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 00:38:30 Check angles 00:38:30 SkyScan query 00:38:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:38:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:38:30 Check angles 00:38:30 SkyScan query 00:38:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:38:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:38:31 Message to Master queued w/err=0: serial=99085 error=0 00:38:36 Received message from Master: op=Filter serial=99086 00:38:36 Color wheel filter change from 0 to 0 00:38:36 FLIGetFilterPos err=0 currentPosition=0 00:38:36 FLIGetStepsRemaining err=0 RemainingSteps=0 00:38:36 Filter is already there-color wheel unchanged 00:38:36 Received message from Master: op=Shutter serial=99087 00:38:36 Shutter LASER close 00:38:36 Received message from Camera: op=State serial=99089 00:38:36 GetSingleValue result=40 Value=cccccccc 00:38:36 SkyScan query 00:38:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:38:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:37 Parameters OK 00:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:37 Set A/D data flow result=40 00:38:37 Set A/D channel type result=40 00:38:37 Set A/D encoding result=40 00:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:37 Set channel filter=0.000000e+000 result=40 00:38:37 Config A/D Result=40 00:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:37 Get A/D filter: -9.255963e+061 result=40 00:38:37 Get A/D value=-858993460 result=40 00:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:37 Parameters OK 00:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:37 Set A/D data flow result=40 00:38:37 Set A/D channel type result=40 00:38:37 Set A/D encoding result=40 00:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:37 Set channel filter=0.000000e+000 result=40 00:38:37 Config A/D Result=40 00:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:37 Get A/D filter: -9.255963e+061 result=40 00:38:37 Get A/D value=-858993460 result=40 00:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:38:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:38:37 Aux= 00:38:37 Message to Camera, serial 99089 queued 00:39:14 Received message from Master: op=PointingHead serial=99102 00:39:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:39:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:39:14 Point started: ret=0 00:39:14 point_skyscan result=0 00:39:15 Check angles 00:39:15 SkyScan query 00:39:15 SkyScan query done: ret=0 az=152.985<-10199 ze=8.76<-11416 Statuses=0009 0009 00:39:15 Msec=0 True Az=152.985 Ze=8.76 Az status=0009 Ze status=0009 00:39:16 Check angles 00:39:16 SkyScan query 00:39:16 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.195<-12813 Statuses=0009 0009 00:39:16 Msec=750 True Az=135.705 Ze=-12.195 Az status=0009 Ze status=0009 00:39:16 Check angles 00:39:16 SkyScan query 00:39:17 SkyScan query done: ret=0 az=118.095<-7873 ze=-33.105<-14207 Statuses=0009 0009 00:39:17 Msec=1500 True Az=118.095 Ze=-33.105 Az status=0009 Ze status=0009 00:39:17 Check angles 00:39:17 SkyScan query 00:39:18 SkyScan query done: ret=0 az=100.68<-6712 ze=-51.525<-15435 Statuses=0009 0009 00:39:18 Msec=2250 True Az=100.68 Ze=-51.525 Az status=0009 Ze status=0009 00:39:18 Check angles 00:39:18 SkyScan query 00:39:18 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:39:18 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:39:19 Check angles 00:39:19 SkyScan query 00:39:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:39:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:39:19 Message to Master queued w/err=0: serial=99102 error=0 00:39:24 Received message from Master: op=Filter serial=99103 00:39:24 Color wheel filter change from 0 to 0 00:39:24 FLIGetFilterPos err=0 currentPosition=0 00:39:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:39:24 Filter is already there-color wheel unchanged 00:39:24 Received message from Master: op=Shutter serial=99104 00:39:24 Shutter LASER close 00:39:24 Received message from Camera: op=State serial=99106 00:39:24 GetSingleValue result=40 Value=cccccccc 00:39:24 SkyScan query 00:39:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:39:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:25 Parameters OK 00:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:25 Set A/D data flow result=40 00:39:25 Set A/D channel type result=40 00:39:25 Set A/D encoding result=40 00:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:25 Set channel filter=0.000000e+000 result=40 00:39:25 Config A/D Result=40 00:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:25 Get A/D filter: -9.255963e+061 result=40 00:39:25 Get A/D value=-858993460 result=40 00:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:25 Parameters OK 00:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:25 Set A/D data flow result=40 00:39:25 Set A/D channel type result=40 00:39:25 Set A/D encoding result=40 00:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:25 Set channel filter=0.000000e+000 result=40 00:39:25 Config A/D Result=40 00:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:25 Get A/D filter: -9.255963e+061 result=40 00:39:25 Get A/D value=-858993460 result=40 00:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:39:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:39:25 Aux= 00:39:25 Message to Camera, serial 99106 queued 00:40:01 Received message from Master: op=PointingHead serial=99118 00:40:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:40:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:40:01 Point started: ret=0 00:40:01 point_skyscan result=0 00:40:02 Check angles 00:40:02 SkyScan query 00:40:03 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.795<-17453 Statuses=0009 0009 00:40:03 Msec=0 True Az=109.38 Ze=-81.795 Az status=0009 Ze status=0009 00:40:03 Check angles 00:40:03 SkyScan query 00:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.185<-18879 Statuses=0008 0009 00:40:03 Msec=750 True Az=112.995 Ze=-103.185 Az status=0008 Ze status=0009 00:40:03 Check angles 00:40:03 SkyScan query 00:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.17<-20278 Statuses=0008 0009 00:40:04 Msec=1500 True Az=112.995 Ze=-124.17 Az status=0008 Ze status=0009 00:40:04 Check angles 00:40:04 SkyScan query 00:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 00:40:05 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 00:40:05 Check angles 00:40:05 SkyScan query 00:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.515<-23101 Statuses=0008 0009 00:40:06 Msec=3000 True Az=112.995 Ze=-166.515 Az status=0008 Ze status=0009 00:40:06 Check angles 00:40:06 SkyScan query 00:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:40:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:40:06 Message to Master queued w/err=0: serial=99118 error=0 00:40:11 Received message from Master: op=Filter serial=99119 00:40:11 Color wheel filter change from 0 to 0 00:40:11 FLIGetFilterPos err=0 currentPosition=0 00:40:11 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:11 Filter is already there-color wheel unchanged 00:40:11 Received message from Master: op=Shutter serial=99120 00:40:11 Shutter LASER open 00:40:12 Received message from Camera: op=State serial=99122 00:40:12 GetSingleValue result=40 Value=cccccccc 00:40:12 SkyScan query 00:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:40:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:12 Parameters OK 00:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:12 Set A/D data flow result=40 00:40:12 Set A/D channel type result=40 00:40:12 Set A/D encoding result=40 00:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:12 Set channel filter=0.000000e+000 result=40 00:40:12 Config A/D Result=40 00:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:12 Get A/D filter: -9.255963e+061 result=40 00:40:12 Get A/D value=-858993460 result=40 00:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:12 Parameters OK 00:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:12 Set A/D data flow result=40 00:40:12 Set A/D channel type result=40 00:40:12 Set A/D encoding result=40 00:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:12 Set channel filter=0.000000e+000 result=40 00:40:12 Config A/D Result=40 00:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:12 Get A/D filter: -9.255963e+061 result=40 00:40:12 Get A/D value=-858993460 result=40 00:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:12 Aux= 00:40:12 Message to Camera, serial 99122 queued 00:40:21 Received message from Master: op=Shutter serial=99132 00:40:21 Shutter LASER close 00:40:21 Received message from Master: op=PointingHead serial=99136 00:40:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:40:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:40:21 Point started: ret=0 00:40:21 point_skyscan result=0 00:40:22 Check angles 00:40:22 SkyScan query 00:40:23 SkyScan query done: ret=0 az=89.82<-5988 ze=157.155<-1523 Statuses=0009 0009 00:40:23 Msec=0 True Az=89.82 Ze=157.155 Az status=0009 Ze status=0009 00:40:23 Check angles 00:40:23 SkyScan query 00:40:24 SkyScan query done: ret=0 az=71.91<-4794 ze=135.75<-2950 Statuses=0009 0009 00:40:24 Msec=750 True Az=71.91 Ze=135.75 Az status=0009 Ze status=0009 00:40:24 Check angles 00:40:24 SkyScan query 00:40:24 SkyScan query done: ret=0 az=54.675<-3645 ze=114.795<-4347 Statuses=0009 0009 00:40:24 Msec=1500 True Az=54.675 Ze=114.795 Az status=0009 Ze status=0009 00:40:24 Check angles 00:40:24 SkyScan query 00:40:25 SkyScan query done: ret=0 az=40.905<-2727 ze=93.84<-5744 Statuses=0009 0009 00:40:25 Msec=2250 True Az=40.905 Ze=93.84 Az status=0009 Ze status=0009 00:40:25 Check angles 00:40:25 SkyScan query 00:40:26 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 00:40:26 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 00:40:26 Check angles 00:40:26 SkyScan query 00:40:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 00:40:27 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 00:40:27 Check angles 00:40:27 SkyScan query 00:40:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:40:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:40:27 Message to Master queued w/err=0: serial=99136 error=0 00:40:32 Received message from Master: op=Filter serial=99137 00:40:32 Color wheel filter change from 0 to 0 00:40:32 FLIGetFilterPos err=0 currentPosition=0 00:40:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:32 Filter is already there-color wheel unchanged 00:40:32 Received message from Master: op=Shutter serial=99138 00:40:32 Shutter LASER close 00:40:33 Received message from Camera: op=State serial=99140 00:40:33 GetSingleValue result=40 Value=cccccccc 00:40:33 SkyScan query 00:40:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:40:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:33 Parameters OK 00:40:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:33 Set A/D data flow result=40 00:40:33 Set A/D channel type result=40 00:40:33 Set A/D encoding result=40 00:40:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:33 Set channel filter=0.000000e+000 result=40 00:40:33 Config A/D Result=40 00:40:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:33 Get A/D filter: -9.255963e+061 result=40 00:40:33 Get A/D value=-858993460 result=40 00:40:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:33 Parameters OK 00:40:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:33 Set A/D data flow result=40 00:40:33 Set A/D channel type result=40 00:40:33 Set A/D encoding result=40 00:40:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:33 Set channel filter=0.000000e+000 result=40 00:40:33 Config A/D Result=40 00:40:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:33 Get A/D filter: -9.255963e+061 result=40 00:40:33 Get A/D value=-858993460 result=40 00:40:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:33 Aux= 00:40:33 Message to Camera, serial 99140 queued 00:41:10 Received message from Master: op=PointingHead serial=99153 00:41:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:41:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:41:11 Point started: ret=0 00:41:11 point_skyscan result=0 00:41:11 Check angles 00:41:11 SkyScan query 00:41:12 SkyScan query done: ret=0 az=40.995<-2733 ze=21.405<-10573 Statuses=0008 0009 00:41:12 Msec=0 True Az=40.995 Ze=21.405 Az status=0008 Ze status=0009 00:41:12 Check angles 00:41:12 SkyScan query 00:41:13 SkyScan query done: ret=0 az=41.01<-2734 ze=0.015<-11999 Statuses=0008 0009 00:41:13 Msec=750 True Az=41.01 Ze=0.015 Az status=0008 Ze status=0009 00:41:13 Check angles 00:41:13 SkyScan query 00:41:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.94<-13396 Statuses=0008 0009 00:41:13 Msec=1500 True Az=40.995 Ze=-20.94 Az status=0008 Ze status=0009 00:41:14 Check angles 00:41:14 SkyScan query 00:41:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:41:14 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:41:14 Check angles 00:41:14 SkyScan query 00:41:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:41:15 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:41:15 Message to Master queued w/err=0: serial=99153 error=0 00:41:20 Received message from Master: op=Filter serial=99154 00:41:20 Color wheel filter change from 0 to 0 00:41:20 FLIGetFilterPos err=0 currentPosition=0 00:41:20 FLIGetStepsRemaining err=0 RemainingSteps=0 00:41:20 Filter is already there-color wheel unchanged 00:41:20 Received message from Master: op=Shutter serial=99155 00:41:20 Shutter LASER close 00:41:20 Received message from Camera: op=State serial=99157 00:41:20 GetSingleValue result=40 Value=cccccccc 00:41:20 SkyScan query 00:41:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:41:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:21 Parameters OK 00:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:21 Set A/D data flow result=40 00:41:21 Set A/D channel type result=40 00:41:21 Set A/D encoding result=40 00:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:21 Set channel filter=0.000000e+000 result=40 00:41:21 Config A/D Result=40 00:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:21 Get A/D filter: -9.255963e+061 result=40 00:41:21 Get A/D value=-858993460 result=40 00:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:21 Parameters OK 00:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:21 Set A/D data flow result=40 00:41:21 Set A/D channel type result=40 00:41:21 Set A/D encoding result=40 00:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:21 Set channel filter=0.000000e+000 result=40 00:41:21 Config A/D Result=40 00:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:21 Get A/D filter: -9.255963e+061 result=40 00:41:21 Get A/D value=-858993460 result=40 00:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:41:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:41:21 Aux= 00:41:21 Message to Camera, serial 99157 queued 00:41:58 Received message from Master: op=PointingHead serial=99170 00:41:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:41:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:41:58 Point started: ret=0 00:41:58 point_skyscan result=0 00:41:59 Check angles 00:41:59 SkyScan query 00:41:59 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.19<-16546 Statuses=0009 0009 00:41:59 Msec=0 True Az=63.87 Ze=-68.19 Az status=0009 Ze status=0009 00:41:59 Check angles 00:41:59 SkyScan query 00:42:00 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.175<-17945 Statuses=0009 0009 00:42:00 Msec=750 True Az=81.435 Ze=-89.175 Az status=0009 Ze status=0009 00:42:00 Check angles 00:42:00 SkyScan query 00:42:01 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.1<-19340 Statuses=0009 0009 00:42:01 Msec=1500 True Az=98.895 Ze=-110.1 Az status=0009 Ze status=0009 00:42:01 Check angles 00:42:01 SkyScan query 00:42:01 SkyScan query done: ret=0 az=116.235<-7749 ze=-131.04<-20736 Statuses=0009 0009 00:42:01 Msec=2250 True Az=116.235 Ze=-131.04 Az status=0009 Ze status=0009 00:42:02 Check angles 00:42:02 SkyScan query 00:42:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 00:42:02 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 00:42:02 Check angles 00:42:02 SkyScan query 00:42:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:42:03 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:42:03 Message to Master queued w/err=0: serial=99170 error=0 00:42:08 Received message from Master: op=Filter serial=99171 00:42:08 Color wheel filter change from 0 to 0 00:42:08 FLIGetFilterPos err=0 currentPosition=0 00:42:08 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:08 Filter is already there-color wheel unchanged 00:42:08 Received message from Master: op=Shutter serial=99172 00:42:08 Shutter LASER close 00:42:08 Received message from Camera: op=State serial=99174 00:42:08 GetSingleValue result=40 Value=cccccccc 00:42:08 SkyScan query 00:42:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:42:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:09 Parameters OK 00:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:09 Set A/D data flow result=40 00:42:09 Set A/D channel type result=40 00:42:09 Set A/D encoding result=40 00:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:09 Set channel filter=0.000000e+000 result=40 00:42:09 Config A/D Result=40 00:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:09 Get A/D filter: -9.255963e+061 result=40 00:42:09 Get A/D value=-858993460 result=40 00:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:09 Parameters OK 00:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:09 Set A/D data flow result=40 00:42:09 Set A/D channel type result=40 00:42:09 Set A/D encoding result=40 00:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:09 Set channel filter=0.000000e+000 result=40 00:42:09 Config A/D Result=40 00:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:09 Get A/D filter: -9.255963e+061 result=40 00:42:09 Get A/D value=-858993460 result=40 00:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:09 Aux= 00:42:09 Message to Camera, serial 99174 queued 00:42:46 Received message from Master: op=PointingHead serial=99187 00:42:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:42:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:42:46 Point started: ret=0 00:42:46 point_skyscan result=0 00:42:47 Check angles 00:42:47 SkyScan query 00:42:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 00:42:47 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 00:42:47 Check angles 00:42:47 SkyScan query 00:42:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:42:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:42:48 Message to Master queued w/err=0: serial=99187 error=0 00:42:53 Received message from Master: op=Filter serial=99188 00:42:53 Color wheel filter change from 0 to 0 00:42:53 FLIGetFilterPos err=0 currentPosition=0 00:42:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:53 Filter is already there-color wheel unchanged 00:42:53 Received message from Master: op=Shutter serial=99189 00:42:53 Shutter LASER open 00:42:53 Received message from Camera: op=State serial=99191 00:42:53 GetSingleValue result=40 Value=cccccccc 00:42:53 SkyScan query 00:42:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:42:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:54 Parameters OK 00:42:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:54 Set A/D data flow result=40 00:42:54 Set A/D channel type result=40 00:42:54 Set A/D encoding result=40 00:42:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:54 Set channel filter=0.000000e+000 result=40 00:42:54 Config A/D Result=40 00:42:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:54 Get A/D filter: -9.255963e+061 result=40 00:42:54 Get A/D value=-858993460 result=40 00:42:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:54 Parameters OK 00:42:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:54 Set A/D data flow result=40 00:42:54 Set A/D channel type result=40 00:42:54 Set A/D encoding result=40 00:42:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:54 Set channel filter=0.000000e+000 result=40 00:42:54 Config A/D Result=40 00:42:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:54 Get A/D filter: -9.255963e+061 result=40 00:42:54 Get A/D value=-858993460 result=40 00:42:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:54 Aux= 00:42:54 Message to Camera, serial 99191 queued 00:43:02 Received message from Master: op=Shutter serial=99201 00:43:02 Shutter LASER close 00:43:03 Received message from Master: op=PointingHead serial=99205 00:43:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:43:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:43:03 Point started: ret=0 00:43:03 point_skyscan result=0 00:43:04 Check angles 00:43:04 SkyScan query 00:43:05 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.43<-21562 Statuses=0009 0009 00:43:05 Msec=0 True Az=135.75 Ze=-143.43 Az status=0009 Ze status=0009 00:43:05 Check angles 00:43:05 SkyScan query 00:43:05 SkyScan query done: ret=0 az=153.615<-10241 ze=-121.995<-20133 Statuses=0009 0009 00:43:05 Msec=750 True Az=153.615 Ze=-121.995 Az status=0009 Ze status=0009 00:43:06 Check angles 00:43:06 SkyScan query 00:43:06 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.115<-18741 Statuses=0009 0009 00:43:06 Msec=1500 True Az=171.045 Ze=-101.115 Az status=0009 Ze status=0009 00:43:06 Check angles 00:43:06 SkyScan query 00:43:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.16<-17344 Statuses=0008 0009 00:43:07 Msec=2250 True Az=176.01 Ze=-80.16 Az status=0008 Ze status=0009 00:43:07 Check angles 00:43:07 SkyScan query 00:43:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.725<-15915 Statuses=0008 0009 00:43:08 Msec=3000 True Az=176.01 Ze=-58.725 Az status=0008 Ze status=0009 00:43:08 Check angles 00:43:08 SkyScan query 00:43:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:43:08 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:43:08 Message to Master queued w/err=0: serial=99205 error=0 00:43:13 Received message from Master: op=Filter serial=99206 00:43:13 Color wheel filter change from 0 to 0 00:43:13 FLIGetFilterPos err=0 currentPosition=0 00:43:13 FLIGetStepsRemaining err=0 RemainingSteps=0 00:43:13 Filter is already there-color wheel unchanged 00:43:14 Received message from Master: op=Shutter serial=99207 00:43:14 Shutter LASER close 00:43:14 Received message from Camera: op=State serial=99209 00:43:14 GetSingleValue result=40 Value=cccccccc 00:43:14 SkyScan query 00:43:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:43:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:14 Parameters OK 00:43:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:14 Set A/D data flow result=40 00:43:14 Set A/D channel type result=40 00:43:14 Set A/D encoding result=40 00:43:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:14 Set channel filter=0.000000e+000 result=40 00:43:14 Config A/D Result=40 00:43:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:14 Get A/D filter: -9.255963e+061 result=40 00:43:14 Get A/D value=-858993460 result=40 00:43:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:14 Parameters OK 00:43:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:14 Set A/D data flow result=40 00:43:14 Set A/D channel type result=40 00:43:14 Set A/D encoding result=40 00:43:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:14 Set channel filter=0.000000e+000 result=40 00:43:14 Config A/D Result=40 00:43:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:14 Get A/D filter: -9.255963e+061 result=40 00:43:14 Get A/D value=-858993460 result=40 00:43:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:43:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:43:14 Aux= 00:43:14 Message to Camera, serial 99209 queued 00:43:51 Received message from Master: op=PointingHead serial=99222 00:43:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:43:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:43:52 Point started: ret=0 00:43:52 point_skyscan result=0 00:43:52 Check angles 00:43:52 SkyScan query 00:43:53 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.9<-13460 Statuses=0009 0009 00:43:53 Msec=0 True Az=152.97 Ze=-21.9 Az status=0009 Ze status=0009 00:43:53 Check angles 00:43:53 SkyScan query 00:43:54 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.855<-12057 Statuses=0009 0009 00:43:54 Msec=750 True Az=135.615 Ze=-0.855 Az status=0009 Ze status=0009 00:43:54 Check angles 00:43:54 SkyScan query 00:43:55 SkyScan query done: ret=0 az=118.065<-7871 ze=20.055<-10663 Statuses=0009 0009 00:43:55 Msec=1500 True Az=118.065 Ze=20.055 Az status=0009 Ze status=0009 00:43:55 Check angles 00:43:55 SkyScan query 00:43:55 SkyScan query done: ret=0 az=100.68<-6712 ze=41.04<-9264 Statuses=0009 0009 00:43:55 Msec=2250 True Az=100.68 Ze=41.04 Az status=0009 Ze status=0009 00:43:55 Check angles 00:43:55 SkyScan query 00:43:56 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 00:43:56 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 00:43:56 Check angles 00:43:56 SkyScan query 00:43:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:43:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:43:57 Message to Master queued w/err=0: serial=99222 error=0 00:44:02 Received message from Master: op=Filter serial=99223 00:44:02 Color wheel filter change from 0 to 0 00:44:02 FLIGetFilterPos err=0 currentPosition=0 00:44:02 FLIGetStepsRemaining err=0 RemainingSteps=0 00:44:02 Filter is already there-color wheel unchanged 00:44:02 Received message from Master: op=Shutter serial=99224 00:44:02 Shutter LASER close 00:44:02 Received message from Camera: op=State serial=99226 00:44:02 GetSingleValue result=40 Value=cccccccc 00:44:02 SkyScan query 00:44:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:44:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:03 Parameters OK 00:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:03 Set A/D data flow result=40 00:44:03 Set A/D channel type result=40 00:44:03 Set A/D encoding result=40 00:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:03 Set channel filter=0.000000e+000 result=40 00:44:03 Config A/D Result=40 00:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:03 Get A/D filter: -9.255963e+061 result=40 00:44:03 Get A/D value=-858993460 result=40 00:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:03 Parameters OK 00:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:03 Set A/D data flow result=40 00:44:03 Set A/D channel type result=40 00:44:03 Set A/D encoding result=40 00:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:03 Set channel filter=0.000000e+000 result=40 00:44:03 Config A/D Result=40 00:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:03 Get A/D filter: -9.255963e+061 result=40 00:44:03 Get A/D value=-858993460 result=40 00:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:44:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:44:03 Aux= 00:44:03 Message to Camera, serial 99226 queued 00:44:39 Received message from Master: op=PointingHead serial=99239 00:44:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:44:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:44:40 Point started: ret=0 00:44:40 point_skyscan result=0 00:44:41 Check angles 00:44:41 SkyScan query 00:44:41 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 00:44:41 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 00:44:41 Check angles 00:44:41 SkyScan query 00:44:42 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 00:44:42 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 00:44:42 Check angles 00:44:42 SkyScan query 00:44:43 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 00:44:43 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 00:44:43 Check angles 00:44:43 SkyScan query 00:44:43 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 00:44:43 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 00:44:44 Check angles 00:44:44 SkyScan query 00:44:44 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:44:44 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:44:44 Check angles 00:44:44 SkyScan query 00:44:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:44:45 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:44:45 Message to Master queued w/err=0: serial=99239 error=0 00:44:50 Received message from Master: op=Filter serial=99240 00:44:50 Color wheel filter change from 0 to 0 00:44:50 FLIGetFilterPos err=0 currentPosition=0 00:44:50 FLIGetStepsRemaining err=0 RemainingSteps=0 00:44:50 Filter is already there-color wheel unchanged 00:44:50 Received message from Master: op=Shutter serial=99241 00:44:50 Shutter LASER close 00:44:50 Received message from Camera: op=State serial=99243 00:44:50 GetSingleValue result=40 Value=cccccccc 00:44:50 SkyScan query 00:44:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:44:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:51 Parameters OK 00:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:51 Set A/D data flow result=40 00:44:51 Set A/D channel type result=40 00:44:51 Set A/D encoding result=40 00:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:51 Set channel filter=0.000000e+000 result=40 00:44:51 Config A/D Result=40 00:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:51 Get A/D filter: -9.255963e+061 result=40 00:44:51 Get A/D value=-858993460 result=40 00:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:51 Parameters OK 00:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:51 Set A/D data flow result=40 00:44:51 Set A/D channel type result=40 00:44:51 Set A/D encoding result=40 00:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:51 Set channel filter=0.000000e+000 result=40 00:44:51 Config A/D Result=40 00:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:51 Get A/D filter: -9.255963e+061 result=40 00:44:51 Get A/D value=-858993460 result=40 00:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:44:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:44:51 Aux= 00:44:51 Message to Camera, serial 99243 queued 00:45:27 Received message from Master: op=Identify serial=99254 00:45:27 Received message from Master: op=PointingHead serial=99259 00:45:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:45:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:45:28 Point started: ret=0 00:45:28 point_skyscan result=0 00:45:29 Check angles 00:45:29 SkyScan query 00:45:29 SkyScan query done: ret=0 az=152.91<-10194 ze=8.73<-11418 Statuses=0009 0009 00:45:29 Msec=0 True Az=152.91 Ze=8.73 Az status=0009 Ze status=0009 00:45:29 Check angles 00:45:29 SkyScan query 00:45:30 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.24<-12816 Statuses=0009 0009 00:45:30 Msec=750 True Az=135.405 Ze=-12.24 Az status=0009 Ze status=0009 00:45:30 Check angles 00:45:30 SkyScan query 00:45:31 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.15<-14210 Statuses=0009 0009 00:45:31 Msec=1500 True Az=117.93 Ze=-33.15 Az status=0009 Ze status=0009 00:45:31 Check angles 00:45:31 SkyScan query 00:45:31 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.555<-15437 Statuses=0009 0009 00:45:31 Msec=2250 True Az=100.185 Ze=-51.555 Az status=0009 Ze status=0009 00:45:32 Check angles 00:45:32 SkyScan query 00:45:32 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 00:45:32 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 00:45:32 Check angles 00:45:32 SkyScan query 00:45:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:45:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:45:33 Message to Master queued w/err=0: serial=99259 error=0 00:45:38 Received message from Master: op=Filter serial=99260 00:45:38 Color wheel filter change from 0 to 0 00:45:38 FLIGetFilterPos err=0 currentPosition=0 00:45:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:38 Filter is already there-color wheel unchanged 00:45:38 Received message from Master: op=Shutter serial=99261 00:45:38 Shutter LASER close 00:45:38 Received message from Camera: op=State serial=99263 00:45:38 GetSingleValue result=40 Value=cccccccc 00:45:38 SkyScan query 00:45:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:45:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:39 Parameters OK 00:45:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:39 Set A/D data flow result=40 00:45:39 Set A/D channel type result=40 00:45:39 Set A/D encoding result=40 00:45:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:39 Set channel filter=0.000000e+000 result=40 00:45:39 Config A/D Result=40 00:45:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:39 Get A/D filter: -9.255963e+061 result=40 00:45:39 Get A/D value=-858993460 result=40 00:45:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:39 Parameters OK 00:45:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:39 Set A/D data flow result=40 00:45:39 Set A/D channel type result=40 00:45:39 Set A/D encoding result=40 [UTC 2018-12-13 00:45:39] 00:45:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:39 Set channel filter=0.000000e+000 result=40 00:45:39 Config A/D Result=40 00:45:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:39 Get A/D filter: -9.255963e+061 result=40 00:45:39 Get A/D value=-858993460 result=40 00:45:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:39 Aux= 00:45:39 Message to Camera, serial 99263 queued 00:46:16 Received message from Master: op=PointingHead serial=99276 00:46:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:46:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:46:16 Point started: ret=0 00:46:16 point_skyscan result=0 00:46:17 Check angles 00:46:17 SkyScan query 00:46:17 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.555<-17437 Statuses=0009 0009 00:46:17 Msec=0 True Az=109.335 Ze=-81.555 Az status=0009 Ze status=0009 00:46:17 Check angles 00:46:17 SkyScan query 00:46:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.975<-18865 Statuses=0008 0009 00:46:18 Msec=750 True Az=112.995 Ze=-102.975 Az status=0008 Ze status=0009 00:46:18 Check angles 00:46:18 SkyScan query 00:46:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 00:46:19 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 00:46:19 Check angles 00:46:19 SkyScan query 00:46:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.87<-21658 Statuses=0008 0009 00:46:19 Msec=2250 True Az=112.995 Ze=-144.87 Az status=0008 Ze status=0009 00:46:20 Check angles 00:46:20 SkyScan query 00:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.275<-23085 Statuses=0008 0009 00:46:20 Msec=3000 True Az=112.995 Ze=-166.275 Az status=0008 Ze status=0009 00:46:20 Check angles 00:46:20 SkyScan query 00:46:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:46:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:46:21 Message to Master queued w/err=0: serial=99276 error=0 00:46:26 Received message from Master: op=Filter serial=99277 00:46:26 Color wheel filter change from 0 to 0 00:46:26 FLIGetFilterPos err=0 currentPosition=0 00:46:26 FLIGetStepsRemaining err=0 RemainingSteps=0 00:46:26 Filter is already there-color wheel unchanged 00:46:26 Received message from Master: op=Shutter serial=99278 00:46:26 Shutter LASER open 00:46:26 Received message from Camera: op=State serial=99280 00:46:26 GetSingleValue result=40 Value=cccccccc 00:46:26 SkyScan query 00:46:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:46:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:27 Parameters OK 00:46:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:27 Set A/D data flow result=40 00:46:27 Set A/D channel type result=40 00:46:27 Set A/D encoding result=40 00:46:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:27 Set channel filter=0.000000e+000 result=40 00:46:27 Config A/D Result=40 00:46:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:27 Get A/D filter: -9.255963e+061 result=40 00:46:27 Get A/D value=-858993460 result=40 00:46:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:27 Parameters OK 00:46:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:27 Set A/D data flow result=40 00:46:27 Set A/D channel type result=40 00:46:27 Set A/D encoding result=40 00:46:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:27 Set channel filter=0.000000e+000 result=40 00:46:27 Config A/D Result=40 00:46:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:27 Get A/D filter: -9.255963e+061 result=40 00:46:27 Get A/D value=-858993460 result=40 00:46:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:46:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:46:27 Aux= 00:46:27 Message to Camera, serial 99280 queued 00:46:35 Received message from Master: op=Shutter serial=99290 00:46:35 Shutter LASER close 00:46:36 Received message from Master: op=PointingHead serial=99294 00:46:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:46:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:46:36 Point started: ret=0 00:46:36 point_skyscan result=0 00:46:37 Check angles 00:46:37 SkyScan query 00:46:37 SkyScan query done: ret=0 az=90.12<-6008 ze=157.485<-1501 Statuses=0009 0009 00:46:37 Msec=0 True Az=90.12 Ze=157.485 Az status=0009 Ze status=0009 00:46:38 Check angles 00:46:38 SkyScan query 00:46:38 SkyScan query done: ret=0 az=72.255<-4817 ze=136.08<-2928 Statuses=0009 0009 00:46:38 Msec=750 True Az=72.255 Ze=136.08 Az status=0009 Ze status=0009 00:46:38 Check angles 00:46:38 SkyScan query 00:46:39 SkyScan query done: ret=0 az=54.66<-3644 ze=114.645<-4357 Statuses=0009 0009 00:46:39 Msec=1500 True Az=54.66 Ze=114.645 Az status=0009 Ze status=0009 00:46:39 Check angles 00:46:39 SkyScan query 00:46:40 SkyScan query done: ret=0 az=40.92<-2728 ze=93.735<-5751 Statuses=0009 0009 00:46:40 Msec=2250 True Az=40.92 Ze=93.735 Az status=0009 Ze status=0009 00:46:40 Check angles 00:46:40 SkyScan query 00:46:40 SkyScan query done: ret=0 az=40.995<-2733 ze=72.75<-7150 Statuses=0008 0009 00:46:40 Msec=3000 True Az=40.995 Ze=72.75 Az status=0008 Ze status=0009 00:46:41 Check angles 00:46:41 SkyScan query 00:46:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 00:46:41 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 00:46:41 Check angles 00:46:41 SkyScan query 00:46:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:46:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:46:42 Message to Master queued w/err=0: serial=99294 error=0 00:46:47 Received message from Master: op=Filter serial=99295 00:46:47 Color wheel filter change from 0 to 0 00:46:47 FLIGetFilterPos err=0 currentPosition=0 00:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 00:46:47 Filter is already there-color wheel unchanged 00:46:47 Received message from Master: op=Shutter serial=99296 00:46:47 Shutter LASER close 00:46:47 Received message from Camera: op=State serial=99298 00:46:47 GetSingleValue result=40 Value=cccccccc 00:46:47 SkyScan query 00:46:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:46:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:48 Parameters OK 00:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:48 Set A/D data flow result=40 00:46:48 Set A/D channel type result=40 00:46:48 Set A/D encoding result=40 00:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:48 Set channel filter=0.000000e+000 result=40 00:46:48 Config A/D Result=40 00:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:48 Get A/D filter: -9.255963e+061 result=40 00:46:48 Get A/D value=-858993460 result=40 00:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:48 Parameters OK 00:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:48 Set A/D data flow result=40 00:46:48 Set A/D channel type result=40 00:46:48 Set A/D encoding result=40 00:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:48 Set channel filter=0.000000e+000 result=40 00:46:48 Config A/D Result=40 00:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:48 Get A/D filter: -9.255963e+061 result=40 00:46:48 Get A/D value=-858993460 result=40 00:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:46:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:46:48 Aux= 00:46:48 Message to Camera, serial 99298 queued 00:47:25 Received message from Master: op=PointingHead serial=99311 00:47:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:47:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:47:25 Point started: ret=0 00:47:25 point_skyscan result=0 00:47:26 Check angles 00:47:26 SkyScan query 00:47:27 SkyScan query done: ret=0 az=40.995<-2733 ze=21.69<-10554 Statuses=0008 0009 00:47:27 Msec=0 True Az=40.995 Ze=21.69 Az status=0008 Ze status=0009 00:47:27 Check angles 00:47:27 SkyScan query 00:47:27 SkyScan query done: ret=0 az=40.995<-2733 ze=0.75<-11950 Statuses=0008 0009 00:47:27 Msec=750 True Az=40.995 Ze=0.75 Az status=0008 Ze status=0009 00:47:27 Check angles 00:47:27 SkyScan query 00:47:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.235<-13349 Statuses=0008 0009 00:47:28 Msec=1500 True Az=40.995 Ze=-20.235 Az status=0008 Ze status=0009 00:47:28 Check angles 00:47:28 SkyScan query 00:47:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 00:47:29 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 00:47:29 Check angles 00:47:29 SkyScan query 00:47:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:47:30 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:47:30 Message to Master queued w/err=0: serial=99311 error=0 00:47:35 Received message from Master: op=Filter serial=99312 00:47:35 Color wheel filter change from 0 to 0 00:47:35 FLIGetFilterPos err=0 currentPosition=0 00:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 00:47:35 Filter is already there-color wheel unchanged 00:47:35 Received message from Master: op=Shutter serial=99313 00:47:35 Shutter LASER close 00:47:35 Received message from Camera: op=State serial=99315 00:47:35 GetSingleValue result=40 Value=cccccccc 00:47:35 SkyScan query 00:47:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:47:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:35 Parameters OK 00:47:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:35 Set A/D data flow result=40 00:47:35 Set A/D channel type result=40 00:47:35 Set A/D encoding result=40 00:47:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:35 Set channel filter=0.000000e+000 result=40 00:47:35 Config A/D Result=40 00:47:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:35 Get A/D filter: -9.255963e+061 result=40 00:47:35 Get A/D value=-858993460 result=40 00:47:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:35 Parameters OK 00:47:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:35 Set A/D data flow result=40 00:47:35 Set A/D channel type result=40 00:47:35 Set A/D encoding result=40 00:47:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:35 Set channel filter=0.000000e+000 result=40 00:47:35 Config A/D Result=40 00:47:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:35 Get A/D filter: -9.255963e+061 result=40 00:47:35 Get A/D value=-858993460 result=40 00:47:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:47:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:47:35 Aux= 00:47:35 Message to Camera, serial 99315 queued 00:48:12 Received message from Master: op=PointingHead serial=99328 00:48:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:48:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:48:13 Point started: ret=0 00:48:13 point_skyscan result=0 00:48:13 Check angles 00:48:13 SkyScan query 00:48:14 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.82<-16588 Statuses=0009 0009 00:48:14 Msec=0 True Az=64.2 Ze=-68.82 Az status=0009 Ze status=0009 00:48:14 Check angles 00:48:14 SkyScan query 00:48:15 SkyScan query done: ret=0 az=81.975<-5465 ze=-89.67<-17978 Statuses=0009 0009 00:48:15 Msec=750 True Az=81.975 Ze=-89.67 Az status=0009 Ze status=0009 00:48:15 Check angles 00:48:15 SkyScan query 00:48:15 SkyScan query done: ret=0 az=99.735<-6649 ze=-111.06<-19404 Statuses=0009 0009 00:48:15 Msec=1500 True Az=99.735 Ze=-111.06 Az status=0009 Ze status=0009 00:48:16 Check angles 00:48:16 SkyScan query 00:48:16 SkyScan query done: ret=0 az=117.33<-7822 ze=-132.015<-20801 Statuses=0009 0009 00:48:16 Msec=2250 True Az=117.33 Ze=-132.015 Az status=0009 Ze status=0009 00:48:16 Check angles 00:48:16 SkyScan query 00:48:17 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 00:48:17 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 00:48:17 Check angles 00:48:17 SkyScan query 00:48:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:48:18 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:48:18 Message to Master queued w/err=0: serial=99328 error=0 00:48:23 Received message from Master: op=Filter serial=99329 00:48:23 Color wheel filter change from 0 to 0 00:48:23 FLIGetFilterPos err=0 currentPosition=0 00:48:23 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:23 Filter is already there-color wheel unchanged 00:48:23 Received message from Master: op=Shutter serial=99330 00:48:23 Shutter LASER close 00:48:23 Received message from Camera: op=State serial=99332 00:48:23 GetSingleValue result=40 Value=cccccccc 00:48:23 SkyScan query 00:48:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:48:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:23 Parameters OK 00:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:23 Set A/D data flow result=40 00:48:23 Set A/D channel type result=40 00:48:23 Set A/D encoding result=40 00:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:23 Set channel filter=0.000000e+000 result=40 00:48:23 Config A/D Result=40 00:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:23 Get A/D filter: -9.255963e+061 result=40 00:48:23 Get A/D value=-858993460 result=40 00:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:23 Parameters OK 00:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:23 Set A/D data flow result=40 00:48:23 Set A/D channel type result=40 00:48:23 Set A/D encoding result=40 00:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:23 Set channel filter=0.000000e+000 result=40 00:48:23 Config A/D Result=40 00:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:23 Get A/D filter: -9.255963e+061 result=40 00:48:23 Get A/D value=-858993460 result=40 00:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:48:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:48:23 Aux= 00:48:23 Message to Camera, serial 99332 queued 00:48:59 Received message from Master: op=PointingHead serial=99344 00:48:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:48:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:49:00 Point started: ret=0 00:49:00 point_skyscan result=0 00:49:00 Check angles 00:49:00 SkyScan query 00:49:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 00:49:01 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 00:49:01 Check angles 00:49:01 SkyScan query 00:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:49:02 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:49:02 Message to Master queued w/err=0: serial=99344 error=0 00:49:07 Received message from Master: op=Filter serial=99345 00:49:07 Color wheel filter change from 0 to 0 00:49:07 FLIGetFilterPos err=0 currentPosition=0 00:49:07 FLIGetStepsRemaining err=0 RemainingSteps=0 00:49:07 Filter is already there-color wheel unchanged 00:49:07 Received message from Master: op=Shutter serial=99346 00:49:07 Shutter LASER open 00:49:07 Received message from Camera: op=State serial=99348 00:49:07 GetSingleValue result=40 Value=cccccccc 00:49:07 SkyScan query 00:49:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:49:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:08 Parameters OK 00:49:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:08 Set A/D data flow result=40 00:49:08 Set A/D channel type result=40 00:49:08 Set A/D encoding result=40 00:49:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:08 Set channel filter=0.000000e+000 result=40 00:49:08 Config A/D Result=40 00:49:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:08 Get A/D filter: -9.255963e+061 result=40 00:49:08 Get A/D value=-858993460 result=40 00:49:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:08 Parameters OK 00:49:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:08 Set A/D data flow result=40 00:49:08 Set A/D channel type result=40 00:49:08 Set A/D encoding result=40 00:49:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:08 Set channel filter=0.000000e+000 result=40 00:49:08 Config A/D Result=40 00:49:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:08 Get A/D filter: -9.255963e+061 result=40 00:49:08 Get A/D value=-858993460 result=40 00:49:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:49:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:49:08 Aux= 00:49:08 Message to Camera, serial 99348 queued 00:49:16 Received message from Master: op=Shutter serial=99358 00:49:16 Shutter LASER close 00:49:17 Received message from Master: op=PointingHead serial=99362 00:49:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:49:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:49:17 Point started: ret=0 00:49:17 point_skyscan result=0 00:49:18 Check angles 00:49:18 SkyScan query 00:49:18 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.295<-21553 Statuses=0009 0009 00:49:18 Msec=0 True Az=135.9 Ze=-143.295 Az status=0009 Ze status=0009 00:49:19 Check angles 00:49:19 SkyScan query 00:49:19 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.325<-20155 Statuses=0009 0009 00:49:19 Msec=750 True Az=153.42 Ze=-122.325 Az status=0009 Ze status=0009 00:49:19 Check angles 00:49:19 SkyScan query 00:49:20 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.95<-18730 Statuses=0009 0009 00:49:20 Msec=1500 True Az=171.27 Ze=-100.95 Az status=0009 Ze status=0009 00:49:20 Check angles 00:49:20 SkyScan query 00:49:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 00:49:21 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 00:49:21 Check angles 00:49:21 SkyScan query 00:49:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.055<-15937 Statuses=0008 0009 00:49:21 Msec=3000 True Az=176.01 Ze=-59.055 Az status=0008 Ze status=0009 00:49:22 Check angles 00:49:22 SkyScan query 00:49:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:49:22 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:49:22 Message to Master queued w/err=0: serial=99362 error=0 00:49:27 Received message from Master: op=Filter serial=99363 00:49:27 Color wheel filter change from 0 to 0 00:49:27 FLIGetFilterPos err=0 currentPosition=0 00:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:49:27 Filter is already there-color wheel unchanged 00:49:27 Received message from Master: op=Shutter serial=99364 00:49:27 Shutter LASER close 00:49:28 Received message from Camera: op=State serial=99366 00:49:28 GetSingleValue result=40 Value=cccccccc 00:49:28 SkyScan query 00:49:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:28 Parameters OK 00:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:28 Set A/D data flow result=40 00:49:28 Set A/D channel type result=40 00:49:28 Set A/D encoding result=40 00:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:28 Set channel filter=0.000000e+000 result=40 00:49:28 Config A/D Result=40 00:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:28 Get A/D filter: -9.255963e+061 result=40 00:49:28 Get A/D value=-858993460 result=40 00:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:28 Parameters OK 00:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:28 Set A/D data flow result=40 00:49:28 Set A/D channel type result=40 00:49:28 Set A/D encoding result=40 00:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:28 Set channel filter=0.000000e+000 result=40 00:49:28 Config A/D Result=40 00:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:28 Get A/D filter: -9.255963e+061 result=40 00:49:28 Get A/D value=-858993460 result=40 00:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:49:28 Aux= 00:49:28 Message to Camera, serial 99366 queued 00:50:05 Received message from Master: op=PointingHead serial=99379 00:50:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:50:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:50:05 Point started: ret=0 00:50:05 point_skyscan result=0 00:50:06 Check angles 00:50:06 SkyScan query 00:50:07 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.735<-13449 Statuses=0009 0009 00:50:07 Msec=0 True Az=152.955 Ze=-21.735 Az status=0009 Ze status=0009 00:50:07 Check angles 00:50:07 SkyScan query 00:50:07 SkyScan query done: ret=0 az=135.075<-9005 ze=-0.285<-12019 Statuses=0009 0009 00:50:07 Msec=750 True Az=135.075 Ze=-0.285 Az status=0009 Ze status=0009 00:50:08 Check angles 00:50:08 SkyScan query 00:50:08 SkyScan query done: ret=0 az=117.525<-7835 ze=20.64<-10624 Statuses=0009 0009 00:50:08 Msec=1500 True Az=117.525 Ze=20.64 Az status=0009 Ze status=0009 00:50:08 Check angles 00:50:08 SkyScan query 00:50:09 SkyScan query done: ret=0 az=100.17<-6678 ze=41.625<-9225 Statuses=0009 0009 00:50:09 Msec=2250 True Az=100.17 Ze=41.625 Az status=0009 Ze status=0009 00:50:09 Check angles 00:50:09 SkyScan query 00:50:10 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:50:10 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:50:10 Check angles 00:50:10 SkyScan query 00:50:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:50:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:50:10 Message to Master queued w/err=0: serial=99379 error=0 00:50:15 Received message from Master: op=Filter serial=99380 00:50:15 Color wheel filter change from 0 to 0 00:50:15 FLIGetFilterPos err=0 currentPosition=0 00:50:15 FLIGetStepsRemaining err=0 RemainingSteps=0 00:50:15 Filter is already there-color wheel unchanged 00:50:16 Received message from Master: op=Shutter serial=99381 00:50:16 Shutter LASER close 00:50:16 Received message from Camera: op=State serial=99383 00:50:16 GetSingleValue result=40 Value=cccccccc 00:50:16 SkyScan query 00:50:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:50:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:16 Parameters OK 00:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:16 Set A/D data flow result=40 00:50:16 Set A/D channel type result=40 00:50:16 Set A/D encoding result=40 00:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:16 Set channel filter=0.000000e+000 result=40 00:50:16 Config A/D Result=40 00:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:16 Get A/D filter: -9.255963e+061 result=40 00:50:16 Get A/D value=-858993460 result=40 00:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:16 Parameters OK 00:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:16 Set A/D data flow result=40 00:50:16 Set A/D channel type result=40 00:50:16 Set A/D encoding result=40 00:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:16 Set channel filter=0.000000e+000 result=40 00:50:16 Config A/D Result=40 00:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:16 Get A/D filter: -9.255963e+061 result=40 00:50:16 Get A/D value=-858993460 result=40 00:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:50:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:50:16 Aux= 00:50:16 Message to Camera, serial 99383 queued 00:50:53 Received message from Master: op=PointingHead serial=99396 00:50:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:50:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:50:53 Point started: ret=0 00:50:53 point_skyscan result=0 00:50:54 Check angles 00:50:54 SkyScan query 00:50:55 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 00:50:55 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 00:50:55 Check angles 00:50:55 SkyScan query 00:50:55 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 00:50:55 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 00:50:56 Check angles 00:50:56 SkyScan query 00:50:56 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 00:50:56 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 00:50:56 Check angles 00:50:56 SkyScan query 00:50:57 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 00:50:57 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 00:50:57 Check angles 00:50:57 SkyScan query 00:50:58 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:50:58 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:50:58 Check angles 00:50:58 SkyScan query 00:50:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:50:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:50:58 Message to Master queued w/err=0: serial=99396 error=0 00:51:03 Received message from Master: op=Filter serial=99397 00:51:03 Color wheel filter change from 0 to 0 00:51:03 FLIGetFilterPos err=0 currentPosition=0 00:51:03 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:03 Filter is already there-color wheel unchanged 00:51:04 Received message from Master: op=Shutter serial=99398 00:51:04 Shutter LASER close 00:51:04 Received message from Camera: op=State serial=99400 00:51:04 GetSingleValue result=40 Value=cccccccc 00:51:04 SkyScan query 00:51:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:51:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:04 Parameters OK 00:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:04 Set A/D data flow result=40 00:51:04 Set A/D channel type result=40 00:51:04 Set A/D encoding result=40 00:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:04 Set channel filter=0.000000e+000 result=40 00:51:04 Config A/D Result=40 00:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:04 Get A/D filter: -9.255963e+061 result=40 00:51:04 Get A/D value=-858993460 result=40 00:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:04 Parameters OK 00:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:04 Set A/D data flow result=40 00:51:04 Set A/D channel type result=40 00:51:04 Set A/D encoding result=40 00:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:04 Set channel filter=0.000000e+000 result=40 00:51:04 Config A/D Result=40 00:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:04 Get A/D filter: -9.255963e+061 result=40 00:51:04 Get A/D value=-858993460 result=40 00:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:04 Aux= 00:51:04 Message to Camera, serial 99400 queued 00:51:41 Received message from Master: op=PointingHead serial=99413 00:51:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:51:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:51:41 Point started: ret=0 00:51:41 point_skyscan result=0 00:51:42 Check angles 00:51:42 SkyScan query 00:51:43 SkyScan query done: ret=0 az=153.12<-10208 ze=8.805<-11413 Statuses=0009 0009 00:51:43 Msec=0 True Az=153.12 Ze=8.805 Az status=0009 Ze status=0009 00:51:43 Check angles 00:51:43 SkyScan query 00:51:43 SkyScan query done: ret=0 az=135.75<-9050 ze=-12.165<-12811 Statuses=0009 0009 00:51:43 Msec=750 True Az=135.75 Ze=-12.165 Az status=0009 Ze status=0009 00:51:44 Check angles 00:51:44 SkyScan query 00:51:44 SkyScan query done: ret=0 az=118.17<-7878 ze=-33.09<-14206 Statuses=0009 0009 00:51:44 Msec=1500 True Az=118.17 Ze=-33.09 Az status=0009 Ze status=0009 00:51:44 Check angles 00:51:44 SkyScan query 00:51:45 SkyScan query done: ret=0 az=100.785<-6719 ze=-51.525<-15435 Statuses=0009 0009 00:51:45 Msec=2250 True Az=100.785 Ze=-51.525 Az status=0009 Ze status=0009 00:51:45 Check angles 00:51:45 SkyScan query 00:51:46 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:51:46 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:51:46 Check angles 00:51:46 SkyScan query 00:51:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:51:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:51:46 Message to Master queued w/err=0: serial=99413 error=0 00:51:51 Received message from Master: op=Filter serial=99414 00:51:51 Color wheel filter change from 0 to 0 00:51:51 FLIGetFilterPos err=0 currentPosition=0 00:51:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:51 Filter is already there-color wheel unchanged 00:51:52 Received message from Master: op=Shutter serial=99415 00:51:52 Shutter LASER close 00:51:52 Received message from Camera: op=State serial=99417 00:51:52 GetSingleValue result=40 Value=cccccccc 00:51:52 SkyScan query 00:51:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:51:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:52 Parameters OK 00:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:52 Set A/D data flow result=40 00:51:52 Set A/D channel type result=40 00:51:52 Set A/D encoding result=40 00:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:52 Set channel filter=0.000000e+000 result=40 00:51:52 Config A/D Result=40 00:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:52 Get A/D filter: -9.255963e+061 result=40 00:51:52 Get A/D value=-858993460 result=40 00:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:52 Parameters OK 00:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:52 Set A/D data flow result=40 00:51:52 Set A/D channel type result=40 00:51:52 Set A/D encoding result=40 00:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:52 Set channel filter=0.000000e+000 result=40 00:51:52 Config A/D Result=40 00:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:52 Get A/D filter: -9.255963e+061 result=40 00:51:52 Get A/D value=-858993460 result=40 00:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:52 Aux= 00:51:52 Message to Camera, serial 99417 queued 00:52:29 Received message from Master: op=PointingHead serial=99430 00:52:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:52:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:52:29 Point started: ret=0 00:52:29 point_skyscan result=0 00:52:30 Check angles 00:52:30 SkyScan query 00:52:31 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.285<-17419 Statuses=0009 0009 00:52:31 Msec=0 True Az=109.005 Ze=-81.285 Az status=0009 Ze status=0009 00:52:31 Check angles 00:52:31 SkyScan query 00:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 00:52:31 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 00:52:32 Check angles 00:52:32 SkyScan query 00:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.21<-20214 Statuses=0008 0009 00:52:32 Msec=1500 True Az=112.995 Ze=-123.21 Az status=0008 Ze status=0009 00:52:32 Check angles 00:52:32 SkyScan query 00:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 00:52:33 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 00:52:33 Check angles 00:52:33 SkyScan query 00:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.96<-23064 Statuses=0008 0009 00:52:34 Msec=3000 True Az=112.995 Ze=-165.96 Az status=0008 Ze status=0009 00:52:34 Check angles 00:52:34 SkyScan query 00:52:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:52:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:52:35 Message to Master queued w/err=0: serial=99430 error=0 00:52:40 Received message from Master: op=Filter serial=99431 00:52:40 Color wheel filter change from 0 to 0 00:52:40 FLIGetFilterPos err=0 currentPosition=0 00:52:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:52:40 Filter is already there-color wheel unchanged 00:52:40 Received message from Master: op=Shutter serial=99432 00:52:40 Shutter LASER open 00:52:40 Received message from Camera: op=State serial=99434 00:52:40 GetSingleValue result=40 Value=cccccccc 00:52:40 SkyScan query 00:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:52:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:40 Parameters OK 00:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:40 Set A/D data flow result=40 00:52:40 Set A/D channel type result=40 00:52:40 Set A/D encoding result=40 00:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:40 Set channel filter=0.000000e+000 result=40 00:52:40 Config A/D Result=40 00:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:40 Get A/D filter: -9.255963e+061 result=40 00:52:40 Get A/D value=-858993460 result=40 00:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:40 Parameters OK 00:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:40 Set A/D data flow result=40 00:52:40 Set A/D channel type result=40 00:52:40 Set A/D encoding result=40 00:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:40 Set channel filter=0.000000e+000 result=40 00:52:40 Config A/D Result=40 00:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:40 Get A/D filter: -9.255963e+061 result=40 00:52:40 Get A/D value=-858993460 result=40 00:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:52:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:52:40 Aux= 00:52:40 Message to Camera, serial 99434 queued 00:52:49 Received message from Master: op=Shutter serial=99444 00:52:49 Shutter LASER close 00:52:49 Received message from Master: op=PointingHead serial=99448 00:52:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:52:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:52:50 Point started: ret=0 00:52:50 point_skyscan result=0 00:52:50 Check angles 00:52:50 SkyScan query 00:52:51 SkyScan query done: ret=0 az=90.135<-6009 ze=157.455<-1503 Statuses=0009 0009 00:52:51 Msec=0 True Az=90.135 Ze=157.455 Az status=0009 Ze status=0009 00:52:51 Check angles 00:52:51 SkyScan query 00:52:52 SkyScan query done: ret=0 az=72.69<-4846 ze=136.455<-2903 Statuses=0009 0009 00:52:52 Msec=750 True Az=72.69 Ze=136.455 Az status=0009 Ze status=0009 00:52:52 Check angles 00:52:52 SkyScan query 00:52:53 SkyScan query done: ret=0 az=55.155<-3677 ze=115.545<-4297 Statuses=0009 0009 00:52:53 Msec=1500 True Az=55.155 Ze=115.545 Az status=0009 Ze status=0009 00:52:53 Check angles 00:52:53 SkyScan query 00:52:53 SkyScan query done: ret=0 az=40.86<-2724 ze=94.125<-5725 Statuses=0009 0009 00:52:53 Msec=2250 True Az=40.86 Ze=94.125 Az status=0009 Ze status=0009 00:52:54 Check angles 00:52:54 SkyScan query 00:52:54 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 00:52:54 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 00:52:54 Check angles 00:52:54 SkyScan query 00:52:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 00:52:55 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 00:52:55 Check angles 00:52:55 SkyScan query 00:52:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:52:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:52:56 Message to Master queued w/err=0: serial=99448 error=0 00:53:01 Received message from Master: op=Filter serial=99449 00:53:01 Color wheel filter change from 0 to 0 00:53:01 FLIGetFilterPos err=0 currentPosition=0 00:53:01 FLIGetStepsRemaining err=0 RemainingSteps=0 00:53:01 Filter is already there-color wheel unchanged 00:53:01 Received message from Master: op=Shutter serial=99450 00:53:01 Shutter LASER close 00:53:01 Received message from Camera: op=State serial=99452 00:53:01 GetSingleValue result=40 Value=cccccccc 00:53:01 SkyScan query 00:53:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:53:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:02 Parameters OK 00:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:02 Set A/D data flow result=40 00:53:02 Set A/D channel type result=40 00:53:02 Set A/D encoding result=40 00:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:02 Set channel filter=0.000000e+000 result=40 00:53:02 Config A/D Result=40 00:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:02 Get A/D filter: -9.255963e+061 result=40 00:53:02 Get A/D value=-858993460 result=40 00:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:02 Parameters OK 00:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:02 Set A/D data flow result=40 00:53:02 Set A/D channel type result=40 00:53:02 Set A/D encoding result=40 00:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:02 Set channel filter=0.000000e+000 result=40 00:53:02 Config A/D Result=40 00:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:02 Get A/D filter: -9.255963e+061 result=40 00:53:02 Get A/D value=-858993460 result=40 00:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:53:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:53:02 Aux= 00:53:02 Message to Camera, serial 99452 queued 00:53:38 Received message from Master: op=PointingHead serial=99465 00:53:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:53:38 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:53:39 Point started: ret=0 00:53:39 point_skyscan result=0 00:53:40 Check angles 00:53:40 SkyScan query 00:53:40 SkyScan query done: ret=0 az=40.995<-2733 ze=21.51<-10566 Statuses=0008 0009 00:53:40 Msec=0 True Az=40.995 Ze=21.51 Az status=0008 Ze status=0009 00:53:40 Check angles 00:53:40 SkyScan query 00:53:41 SkyScan query done: ret=0 az=40.995<-2733 ze=0.465<-11969 Statuses=0008 0009 00:53:41 Msec=750 True Az=40.995 Ze=0.465 Az status=0008 Ze status=0009 00:53:41 Check angles 00:53:41 SkyScan query 00:53:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.82<-13388 Statuses=0008 0009 00:53:42 Msec=1500 True Az=40.995 Ze=-20.82 Az status=0008 Ze status=0009 00:53:42 Check angles 00:53:42 SkyScan query 00:53:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:53:42 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:53:43 Check angles 00:53:43 SkyScan query 00:53:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:53:43 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:53:43 Message to Master queued w/err=0: serial=99465 error=0 00:53:48 Received message from Master: op=Filter serial=99466 00:53:48 Color wheel filter change from 0 to 0 00:53:48 FLIGetFilterPos err=0 currentPosition=0 00:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:53:48 Filter is already there-color wheel unchanged 00:53:48 Received message from Master: op=Shutter serial=99467 00:53:48 Shutter LASER close 00:53:48 Received message from Camera: op=State serial=99469 00:53:48 GetSingleValue result=40 Value=cccccccc 00:53:48 SkyScan query 00:53:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:53:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:49 Parameters OK 00:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:49 Set A/D data flow result=40 00:53:49 Set A/D channel type result=40 00:53:49 Set A/D encoding result=40 00:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:49 Set channel filter=0.000000e+000 result=40 00:53:49 Config A/D Result=40 00:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:49 Get A/D filter: -9.255963e+061 result=40 00:53:49 Get A/D value=-858993460 result=40 00:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:49 Parameters OK 00:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:49 Set A/D data flow result=40 00:53:49 Set A/D channel type result=40 00:53:49 Set A/D encoding result=40 00:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:49 Set channel filter=0.000000e+000 result=40 00:53:49 Config A/D Result=40 00:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:49 Get A/D filter: -9.255963e+061 result=40 00:53:49 Get A/D value=-858993460 result=40 00:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:53:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:53:49 Aux= 00:53:49 Message to Camera, serial 99469 queued 00:54:26 Received message from Master: op=PointingHead serial=99482 00:54:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:54:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:54:26 Point started: ret=0 00:54:26 point_skyscan result=0 00:54:27 Check angles 00:54:27 SkyScan query 00:54:27 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.055<-16537 Statuses=0009 0009 00:54:27 Msec=0 True Az=63.765 Ze=-68.055 Az status=0009 Ze status=0009 00:54:28 Check angles 00:54:28 SkyScan query 00:54:28 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.055<-17937 Statuses=0009 0009 00:54:28 Msec=750 True Az=81.315 Ze=-89.055 Az status=0009 Ze status=0009 00:54:28 Check angles 00:54:28 SkyScan query 00:54:29 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.445<-19363 Statuses=0009 0009 00:54:29 Msec=1500 True Az=99.195 Ze=-110.445 Az status=0009 Ze status=0009 00:54:29 Check angles 00:54:29 SkyScan query 00:54:30 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.37<-20758 Statuses=0009 0009 00:54:30 Msec=2250 True Az=116.7 Ze=-131.37 Az status=0009 Ze status=0009 00:54:30 Check angles 00:54:30 SkyScan query 00:54:30 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 00:54:30 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 00:54:31 Check angles 00:54:31 SkyScan query 00:54:31 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:54:31 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:54:31 Message to Master queued w/err=0: serial=99482 error=0 00:54:36 Received message from Master: op=Filter serial=99483 00:54:36 Color wheel filter change from 0 to 0 00:54:36 FLIGetFilterPos err=0 currentPosition=0 00:54:36 FLIGetStepsRemaining err=0 RemainingSteps=0 00:54:36 Filter is already there-color wheel unchanged 00:54:36 Received message from Master: op=Shutter serial=99484 00:54:36 Shutter LASER close 00:54:36 Received message from Camera: op=State serial=99486 00:54:36 GetSingleValue result=40 Value=cccccccc 00:54:36 SkyScan query 00:54:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:54:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:37 Parameters OK 00:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:37 Set A/D data flow result=40 00:54:37 Set A/D channel type result=40 00:54:37 Set A/D encoding result=40 00:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:37 Set channel filter=0.000000e+000 result=40 00:54:37 Config A/D Result=40 00:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:37 Get A/D filter: -9.255963e+061 result=40 00:54:37 Get A/D value=-858993460 result=40 00:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:37 Parameters OK 00:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:37 Set A/D data flow result=40 00:54:37 Set A/D channel type result=40 00:54:37 Set A/D encoding result=40 00:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:37 Set channel filter=0.000000e+000 result=40 00:54:37 Config A/D Result=40 00:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:37 Get A/D filter: -9.255963e+061 result=40 00:54:37 Get A/D value=-858993460 result=40 00:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:54:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:54:37 Aux= 00:54:37 Message to Camera, serial 99486 queued 00:55:14 Received message from Master: op=PointingHead serial=99499 00:55:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:55:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:55:14 Point started: ret=0 00:55:14 point_skyscan result=0 00:55:15 Check angles 00:55:15 SkyScan query 00:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0009 0009 00:55:16 Msec=0 True Az=112.995 Ze=-171.525 Az status=0009 Ze status=0009 00:55:16 Check angles 00:55:16 SkyScan query 00:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:55:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:55:16 Message to Master queued w/err=0: serial=99499 error=0 00:55:21 Received message from Master: op=Filter serial=99500 00:55:21 Color wheel filter change from 0 to 0 00:55:21 FLIGetFilterPos err=0 currentPosition=0 00:55:21 FLIGetStepsRemaining err=0 RemainingSteps=0 00:55:21 Filter is already there-color wheel unchanged 00:55:21 Received message from Master: op=Shutter serial=99501 00:55:21 Shutter LASER open 00:55:22 Received message from Camera: op=State serial=99503 00:55:22 GetSingleValue result=40 Value=cccccccc 00:55:22 SkyScan query 00:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:55:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:22 Parameters OK 00:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:22 Set A/D data flow result=40 00:55:22 Set A/D channel type result=40 00:55:22 Set A/D encoding result=40 00:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:22 Set channel filter=0.000000e+000 result=40 00:55:22 Config A/D Result=40 00:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:22 Get A/D filter: -9.255963e+061 result=40 00:55:22 Get A/D value=-858993460 result=40 00:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:22 Parameters OK 00:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:22 Set A/D data flow result=40 00:55:22 Set A/D channel type result=40 00:55:22 Set A/D encoding result=40 00:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:22 Set channel filter=0.000000e+000 result=40 00:55:22 Config A/D Result=40 00:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:22 Get A/D filter: -9.255963e+061 result=40 00:55:22 Get A/D value=-858993460 result=40 00:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:55:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:55:22 Aux= 00:55:22 Message to Camera, serial 99503 queued 00:55:31 Received message from Master: op=Shutter serial=99513 00:55:31 Shutter LASER close 00:55:31 Received message from Master: op=PointingHead serial=99517 00:55:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:55:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:55:32 Point started: ret=0 00:55:32 point_skyscan result=0 00:55:32 Check angles 00:55:32 SkyScan query 00:55:33 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.325<-21555 Statuses=0009 0009 00:55:33 Msec=0 True Az=135.9 Ze=-143.325 Az status=0009 Ze status=0009 00:55:33 Check angles 00:55:33 SkyScan query 00:55:34 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.905<-20127 Statuses=0009 0009 00:55:34 Msec=750 True Az=153.765 Ze=-121.905 Az status=0009 Ze status=0009 00:55:34 Check angles 00:55:34 SkyScan query 00:55:34 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.995<-18733 Statuses=0009 0009 00:55:34 Msec=1500 True Az=171.225 Ze=-100.995 Az status=0009 Ze status=0009 00:55:35 Check angles [UTC 2018-12-13 00:55:35] 00:55:35 SkyScan query 00:55:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-78.27<-17218 Statuses=0008 0009 00:55:35 Msec=2250 True Az=176.01 Ze=-78.27 Az status=0008 Ze status=0009 00:55:35 Check angles 00:55:35 SkyScan query 00:55:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.085<-15939 Statuses=0008 0009 00:55:36 Msec=3000 True Az=176.01 Ze=-59.085 Az status=0008 Ze status=0009 00:55:36 Check angles 00:55:36 SkyScan query 00:55:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:55:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:55:37 Message to Master queued w/err=0: serial=99517 error=0 00:55:42 Received message from Master: op=Filter serial=99518 00:55:42 Color wheel filter change from 0 to 0 00:55:42 FLIGetFilterPos err=0 currentPosition=0 00:55:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:55:42 Filter is already there-color wheel unchanged 00:55:42 Received message from Master: op=Shutter serial=99519 00:55:42 Shutter LASER close 00:55:42 Received message from Camera: op=State serial=99521 00:55:42 GetSingleValue result=40 Value=cccccccc 00:55:42 SkyScan query 00:55:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:55:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:43 Parameters OK 00:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:43 Set A/D data flow result=40 00:55:43 Set A/D channel type result=40 00:55:43 Set A/D encoding result=40 00:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:43 Set channel filter=0.000000e+000 result=40 00:55:43 Config A/D Result=40 00:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:43 Get A/D filter: -9.255963e+061 result=40 00:55:43 Get A/D value=-858993460 result=40 00:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:43 Parameters OK 00:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:43 Set A/D data flow result=40 00:55:43 Set A/D channel type result=40 00:55:43 Set A/D encoding result=40 00:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:43 Set channel filter=0.000000e+000 result=40 00:55:43 Config A/D Result=40 00:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:43 Get A/D filter: -9.255963e+061 result=40 00:55:43 Get A/D value=-858993460 result=40 00:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:55:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:55:43 Aux= 00:55:43 Message to Camera, serial 99521 queued [UTC 2018-12-13 00:55:53] 00:56:19 Received message from Master: op=PointingHead serial=99534 00:56:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:56:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:56:20 Point started: ret=0 00:56:20 point_skyscan result=0 00:56:21 Check angles 00:56:21 SkyScan query 00:56:21 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.27<-13418 Statuses=0009 0009 00:56:21 Msec=0 True Az=152.655 Ze=-21.27 Az status=0009 Ze status=0009 00:56:21 Check angles 00:56:21 SkyScan query 00:56:22 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.3<-12020 Statuses=0009 0009 00:56:22 Msec=750 True Az=135.135 Ze=-0.3 Az status=0009 Ze status=0009 00:56:22 Check angles 00:56:22 SkyScan query 00:56:23 SkyScan query done: ret=0 az=117.57<-7838 ze=20.625<-10625 Statuses=0009 0009 00:56:23 Msec=1500 True Az=117.57 Ze=20.625 Az status=0009 Ze status=0009 00:56:23 Check angles 00:56:23 SkyScan query 00:56:23 SkyScan query done: ret=0 az=100.29<-6686 ze=41.625<-9225 Statuses=0009 0009 00:56:23 Msec=2250 True Az=100.29 Ze=41.625 Az status=0009 Ze status=0009 00:56:24 Check angles 00:56:24 SkyScan query 00:56:24 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:56:24 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:56:24 Check angles 00:56:24 SkyScan query 00:56:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:56:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:56:25 Message to Master queued w/err=0: serial=99534 error=0 00:56:30 Received message from Master: op=Filter serial=99535 00:56:30 Color wheel filter change from 0 to 0 00:56:30 FLIGetFilterPos err=0 currentPosition=0 00:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:56:30 Filter is already there-color wheel unchanged 00:56:30 Received message from Master: op=Shutter serial=99536 00:56:30 Shutter LASER close 00:56:30 Received message from Camera: op=State serial=99538 00:56:30 GetSingleValue result=40 Value=cccccccc 00:56:30 SkyScan query 00:56:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:56:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:31 Parameters OK 00:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:31 Set A/D data flow result=40 00:56:31 Set A/D channel type result=40 00:56:31 Set A/D encoding result=40 00:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:31 Set channel filter=0.000000e+000 result=40 00:56:31 Config A/D Result=40 00:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:31 Get A/D filter: -9.255963e+061 result=40 00:56:31 Get A/D value=-858993460 result=40 00:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:31 Parameters OK 00:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:31 Set A/D data flow result=40 00:56:31 Set A/D channel type result=40 00:56:31 Set A/D encoding result=40 00:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:31 Set channel filter=0.000000e+000 result=40 00:56:31 Config A/D Result=40 00:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:31 Get A/D filter: -9.255963e+061 result=40 00:56:31 Get A/D value=-858993460 result=40 00:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:56:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:56:31 Aux= 00:56:31 Message to Camera, serial 99538 queued 00:57:07 Received message from Master: op=PointingHead serial=99551 00:57:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:57:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:57:08 Point started: ret=0 00:57:08 point_skyscan result=0 00:57:09 Check angles 00:57:09 SkyScan query 00:57:09 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 00:57:09 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 00:57:09 Check angles 00:57:09 SkyScan query 00:57:10 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 00:57:10 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 00:57:10 Check angles 00:57:10 SkyScan query 00:57:11 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 00:57:11 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 00:57:11 Check angles 00:57:11 SkyScan query 00:57:11 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 00:57:11 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 00:57:12 Check angles 00:57:12 SkyScan query 00:57:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:57:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:57:12 Check angles 00:57:12 SkyScan query 00:57:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:57:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:57:13 Message to Master queued w/err=0: serial=99551 error=0 00:57:18 Received message from Master: op=Filter serial=99552 00:57:18 Color wheel filter change from 0 to 0 00:57:18 FLIGetFilterPos err=0 currentPosition=0 00:57:18 FLIGetStepsRemaining err=0 RemainingSteps=0 00:57:18 Filter is already there-color wheel unchanged 00:57:18 Received message from Master: op=Shutter serial=99553 00:57:18 Shutter LASER close 00:57:18 Received message from Camera: op=State serial=99555 00:57:18 GetSingleValue result=40 Value=cccccccc 00:57:18 SkyScan query 00:57:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:57:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:19 Parameters OK 00:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:19 Set A/D data flow result=40 00:57:19 Set A/D channel type result=40 00:57:19 Set A/D encoding result=40 00:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:19 Set channel filter=0.000000e+000 result=40 00:57:19 Config A/D Result=40 00:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:19 Get A/D filter: -9.255963e+061 result=40 00:57:19 Get A/D value=-858993460 result=40 00:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:19 Parameters OK 00:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:19 Set A/D data flow result=40 00:57:19 Set A/D channel type result=40 00:57:19 Set A/D encoding result=40 00:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:19 Set channel filter=0.000000e+000 result=40 00:57:19 Config A/D Result=40 00:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:19 Get A/D filter: -9.255963e+061 result=40 00:57:19 Get A/D value=-858993460 result=40 00:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:57:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:57:19 Aux= 00:57:19 Message to Camera, serial 99555 queued 00:57:55 Received message from Master: op=PointingHead serial=99567 00:57:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:57:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:57:55 Point started: ret=0 00:57:55 point_skyscan result=0 00:57:56 Check angles 00:57:56 SkyScan query 00:57:56 SkyScan query done: ret=0 az=152.61<-10174 ze=8.115<-11459 Statuses=0009 0009 00:57:56 Msec=0 True Az=152.61 Ze=8.115 Az status=0009 Ze status=0009 00:57:57 Check angles 00:57:57 SkyScan query 00:57:57 SkyScan query done: ret=0 az=134.625<-8975 ze=-13.26<-12884 Statuses=0009 0009 00:57:57 Msec=750 True Az=134.625 Ze=-13.26 Az status=0009 Ze status=0009 00:57:57 Check angles 00:57:57 SkyScan query 00:57:58 SkyScan query done: ret=0 az=117.12<-7808 ze=-34.245<-14283 Statuses=0009 0009 00:57:58 Msec=1500 True Az=117.12 Ze=-34.245 Az status=0009 Ze status=0009 00:57:58 Check angles 00:57:58 SkyScan query 00:57:59 SkyScan query done: ret=0 az=99.825<-6655 ze=-51.555<-15437 Statuses=0009 0009 00:57:59 Msec=2250 True Az=99.825 Ze=-51.555 Az status=0009 Ze status=0009 00:57:59 Check angles 00:57:59 SkyScan query 00:57:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 00:57:59 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 00:58:00 Check angles 00:58:00 SkyScan query 00:58:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:58:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:58:00 Message to Master queued w/err=0: serial=99567 error=0 00:58:05 Received message from Master: op=Filter serial=99568 00:58:05 Color wheel filter change from 0 to 0 00:58:05 FLIGetFilterPos err=0 currentPosition=0 00:58:05 FLIGetStepsRemaining err=0 RemainingSteps=0 00:58:05 Filter is already there-color wheel unchanged 00:58:05 Received message from Master: op=Shutter serial=99569 00:58:05 Shutter LASER close 00:58:05 Received message from Camera: op=State serial=99571 00:58:05 GetSingleValue result=40 Value=cccccccc 00:58:05 SkyScan query 00:58:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:58:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:06 Parameters OK 00:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:06 Set A/D data flow result=40 00:58:06 Set A/D channel type result=40 00:58:06 Set A/D encoding result=40 00:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:06 Set channel filter=0.000000e+000 result=40 00:58:06 Config A/D Result=40 00:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:06 Get A/D filter: -9.255963e+061 result=40 00:58:06 Get A/D value=-858993460 result=40 00:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:06 Parameters OK 00:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:06 Set A/D data flow result=40 00:58:06 Set A/D channel type result=40 00:58:06 Set A/D encoding result=40 00:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:06 Set channel filter=0.000000e+000 result=40 00:58:06 Config A/D Result=40 00:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:06 Get A/D filter: -9.255963e+061 result=40 00:58:06 Get A/D value=-858993460 result=40 00:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:58:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:58:06 Aux= 00:58:06 Message to Camera, serial 99571 queued 00:58:43 Received message from Master: op=PointingHead serial=99584 00:58:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:58:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:58:43 Point started: ret=0 00:58:43 point_skyscan result=0 00:58:44 Check angles 00:58:44 SkyScan query 00:58:44 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.675<-17445 Statuses=0009 0009 00:58:44 Msec=0 True Az=109.35 Ze=-81.675 Az status=0009 Ze status=0009 00:58:45 Check angles 00:58:45 SkyScan query 00:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 00:58:45 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 00:58:45 Check angles 00:58:45 SkyScan query 00:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.57<-20238 Statuses=0008 0009 00:58:46 Msec=1500 True Az=112.995 Ze=-123.57 Az status=0008 Ze status=0009 00:58:46 Check angles 00:58:46 SkyScan query 00:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 00:58:47 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 00:58:47 Check angles 00:58:47 SkyScan query 00:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 00:58:47 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 00:58:48 Check angles 00:58:48 SkyScan query 00:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:58:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:58:48 Message to Master queued w/err=0: serial=99584 error=0 00:58:53 Received message from Master: op=Filter serial=99585 00:58:53 Color wheel filter change from 0 to 0 00:58:53 FLIGetFilterPos err=0 currentPosition=0 00:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:58:53 Filter is already there-color wheel unchanged 00:58:53 Received message from Master: op=Shutter serial=99586 00:58:53 Shutter LASER open 00:58:54 Received message from Camera: op=State serial=99588 00:58:54 GetSingleValue result=40 Value=cccccccc 00:58:54 SkyScan query 00:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:54 Parameters OK 00:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:54 Set A/D data flow result=40 00:58:54 Set A/D channel type result=40 00:58:54 Set A/D encoding result=40 00:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:54 Set channel filter=0.000000e+000 result=40 00:58:54 Config A/D Result=40 00:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:54 Get A/D filter: -9.255963e+061 result=40 00:58:54 Get A/D value=-858993460 result=40 00:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:54 Parameters OK 00:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:54 Set A/D data flow result=40 00:58:54 Set A/D channel type result=40 00:58:54 Set A/D encoding result=40 00:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:54 Set channel filter=0.000000e+000 result=40 00:58:54 Config A/D Result=40 00:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:54 Get A/D filter: -9.255963e+061 result=40 00:58:54 Get A/D value=-858993460 result=40 00:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:58:54 Aux= 00:58:54 Message to Camera, serial 99588 queued 00:59:03 Received message from Master: op=Shutter serial=99598 00:59:03 Shutter LASER close 00:59:03 Received message from Master: op=PointingHead serial=99602 00:59:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:59:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:59:03 Point started: ret=0 00:59:03 point_skyscan result=0 00:59:04 Check angles 00:59:04 SkyScan query 00:59:05 SkyScan query done: ret=0 az=90.18<-6012 ze=157.53<-1498 Statuses=0009 0009 00:59:05 Msec=0 True Az=90.18 Ze=157.53 Az status=0009 Ze status=0009 00:59:05 Check angles 00:59:05 SkyScan query 00:59:05 SkyScan query done: ret=0 az=72.27<-4818 ze=136.095<-2927 Statuses=0009 0009 00:59:05 Msec=750 True Az=72.27 Ze=136.095 Az status=0009 Ze status=0009 00:59:06 Check angles 00:59:06 SkyScan query 00:59:06 SkyScan query done: ret=0 az=54.645<-3643 ze=114.72<-4352 Statuses=0009 0009 00:59:06 Msec=1500 True Az=54.645 Ze=114.72 Az status=0009 Ze status=0009 00:59:06 Check angles 00:59:06 SkyScan query 00:59:07 SkyScan query done: ret=0 az=40.905<-2727 ze=93.765<-5749 Statuses=0009 0009 00:59:07 Msec=2250 True Az=40.905 Ze=93.765 Az status=0009 Ze status=0009 00:59:07 Check angles 00:59:07 SkyScan query 00:59:08 SkyScan query done: ret=0 az=41.01<-2734 ze=72.795<-7147 Statuses=0008 0009 00:59:08 Msec=3000 True Az=41.01 Ze=72.795 Az status=0008 Ze status=0009 00:59:08 Check angles 00:59:08 SkyScan query 00:59:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 00:59:08 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 00:59:09 Check angles 00:59:09 SkyScan query 00:59:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:59:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:59:09 Message to Master queued w/err=0: serial=99602 error=0 00:59:14 Received message from Master: op=Filter serial=99603 00:59:14 Color wheel filter change from 0 to 0 00:59:14 FLIGetFilterPos err=0 currentPosition=0 00:59:14 FLIGetStepsRemaining err=0 RemainingSteps=0 00:59:14 Filter is already there-color wheel unchanged 00:59:14 Received message from Master: op=Shutter serial=99604 00:59:14 Shutter LASER close 00:59:15 Received message from Camera: op=State serial=99606 00:59:15 GetSingleValue result=40 Value=cccccccc 00:59:15 SkyScan query 00:59:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:59:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:15 Parameters OK 00:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:15 Set A/D data flow result=40 00:59:15 Set A/D channel type result=40 00:59:15 Set A/D encoding result=40 00:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:15 Set channel filter=0.000000e+000 result=40 00:59:15 Config A/D Result=40 00:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:15 Get A/D filter: -9.255963e+061 result=40 00:59:15 Get A/D value=-858993460 result=40 00:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:15 Parameters OK 00:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:15 Set A/D data flow result=40 00:59:15 Set A/D channel type result=40 00:59:15 Set A/D encoding result=40 00:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:15 Set channel filter=0.000000e+000 result=40 00:59:15 Config A/D Result=40 00:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:15 Get A/D filter: -9.255963e+061 result=40 00:59:15 Get A/D value=-858993460 result=40 00:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:59:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:59:15 Aux= 00:59:15 Message to Camera, serial 99606 queued 00:59:52 Received message from Master: op=PointingHead serial=99619 00:59:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:59:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:59:52 Point started: ret=0 00:59:52 point_skyscan result=0 00:59:53 Check angles 00:59:53 SkyScan query 00:59:54 SkyScan query done: ret=0 az=40.995<-2733 ze=21.555<-10563 Statuses=0008 0009 00:59:54 Msec=0 True Az=40.995 Ze=21.555 Az status=0008 Ze status=0009 00:59:54 Check angles 00:59:54 SkyScan query 00:59:55 SkyScan query done: ret=0 az=41.01<-2734 ze=0.15<-11990 Statuses=0008 0009 00:59:55 Msec=750 True Az=41.01 Ze=0.15 Az status=0008 Ze status=0009 00:59:55 Check angles 00:59:55 SkyScan query 00:59:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.79<-13386 Statuses=0008 0009 00:59:55 Msec=1500 True Az=40.995 Ze=-20.79 Az status=0008 Ze status=0009 00:59:55 Check angles 00:59:55 SkyScan query 00:59:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:59:56 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:59:56 Check angles 00:59:56 SkyScan query 00:59:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:59:57 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:59:57 Message to Master queued w/err=0: serial=99619 error=0 01:00:02 Received message from Master: op=Filter serial=99620 01:00:02 Color wheel filter change from 0 to 0 01:00:02 FLIGetFilterPos err=0 currentPosition=0 01:00:02 FLIGetStepsRemaining err=0 RemainingSteps=0 01:00:02 Filter is already there-color wheel unchanged 01:00:02 Received message from Master: op=Shutter serial=99621 01:00:02 Shutter LASER close 01:00:02 Received message from Camera: op=State serial=99623 01:00:02 GetSingleValue result=40 Value=cccccccc 01:00:02 SkyScan query 01:00:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:00:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:03 Parameters OK 01:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:03 Set A/D data flow result=40 01:00:03 Set A/D channel type result=40 01:00:03 Set A/D encoding result=40 01:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:03 Set channel filter=0.000000e+000 result=40 01:00:03 Config A/D Result=40 01:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:03 Get A/D filter: -9.255963e+061 result=40 01:00:03 Get A/D value=-858993460 result=40 01:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:03 Parameters OK 01:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:03 Set A/D data flow result=40 01:00:03 Set A/D channel type result=40 01:00:03 Set A/D encoding result=40 01:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:03 Set channel filter=0.000000e+000 result=40 01:00:03 Config A/D Result=40 01:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:03 Get A/D filter: -9.255963e+061 result=40 01:00:03 Get A/D value=-858993460 result=40 01:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:00:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:00:03 Aux= 01:00:03 Message to Camera, serial 99623 queued 01:00:39 Received message from Master: op=PointingHead serial=99636 01:00:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:00:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:00:40 Point started: ret=0 01:00:40 point_skyscan result=0 01:00:40 Check angles 01:00:40 SkyScan query 01:00:41 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.46<-16564 Statuses=0009 0009 01:00:41 Msec=0 True Az=64.17 Ze=-68.46 Az status=0009 Ze status=0009 01:00:41 Check angles 01:00:41 SkyScan query 01:00:42 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.43<-17962 Statuses=0009 0009 01:00:42 Msec=750 True Az=81.78 Ze=-89.43 Az status=0009 Ze status=0009 01:00:42 Check angles 01:00:42 SkyScan query 01:00:43 SkyScan query done: ret=0 az=99.765<-6651 ze=-110.805<-19387 Statuses=0009 0009 01:00:43 Msec=1500 True Az=99.765 Ze=-110.805 Az status=0009 Ze status=0009 01:00:43 Check angles 01:00:43 SkyScan query 01:00:43 SkyScan query done: ret=0 az=117.45<-7830 ze=-132.195<-20813 Statuses=0009 0009 01:00:43 Msec=2250 True Az=117.45 Ze=-132.195 Az status=0009 Ze status=0009 01:00:44 Check angles 01:00:44 SkyScan query 01:00:44 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 01:00:44 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 01:00:44 Check angles 01:00:44 SkyScan query 01:00:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:00:45 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:00:45 Message to Master queued w/err=0: serial=99636 error=0 01:00:50 Received message from Master: op=Filter serial=99637 01:00:50 Color wheel filter change from 0 to 0 01:00:50 FLIGetFilterPos err=0 currentPosition=0 01:00:50 FLIGetStepsRemaining err=0 RemainingSteps=0 01:00:50 Filter is already there-color wheel unchanged 01:00:50 Received message from Master: op=Shutter serial=99638 01:00:50 Shutter LASER close 01:00:50 Received message from Camera: op=State serial=99640 01:00:50 GetSingleValue result=40 Value=cccccccc 01:00:50 SkyScan query 01:00:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:00:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:51 Parameters OK 01:00:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:51 Set A/D data flow result=40 01:00:51 Set A/D channel type result=40 01:00:51 Set A/D encoding result=40 01:00:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:51 Set channel filter=0.000000e+000 result=40 01:00:51 Config A/D Result=40 01:00:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:51 Get A/D filter: -9.255963e+061 result=40 01:00:51 Get A/D value=-858993460 result=40 01:00:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:51 Parameters OK 01:00:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:51 Set A/D data flow result=40 01:00:51 Set A/D channel type result=40 01:00:51 Set A/D encoding result=40 01:00:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:51 Set channel filter=0.000000e+000 result=40 01:00:51 Config A/D Result=40 01:00:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:51 Get A/D filter: -9.255963e+061 result=40 01:00:51 Get A/D value=-858993460 result=40 01:00:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:00:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:00:51 Aux= 01:00:51 Message to Camera, serial 99640 queued 01:01:27 Received message from Master: op=PointingHead serial=99653 01:01:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:01:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:01:28 Point started: ret=0 01:01:28 point_skyscan result=0 01:01:29 Check angles 01:01:29 SkyScan query 01:01:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 01:01:29 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 01:01:29 Check angles 01:01:29 SkyScan query 01:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:01:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:01:30 Message to Master queued w/err=0: serial=99653 error=0 01:01:35 Received message from Master: op=Filter serial=99654 01:01:35 Color wheel filter change from 0 to 0 01:01:35 FLIGetFilterPos err=0 currentPosition=0 01:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 01:01:35 Filter is already there-color wheel unchanged 01:01:35 Received message from Master: op=Shutter serial=99655 01:01:35 Shutter LASER open 01:01:35 Received message from Camera: op=State serial=99657 01:01:35 GetSingleValue result=40 Value=cccccccc 01:01:35 SkyScan query 01:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:36 Parameters OK 01:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:36 Set A/D data flow result=40 01:01:36 Set A/D channel type result=40 01:01:36 Set A/D encoding result=40 01:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:36 Set channel filter=0.000000e+000 result=40 01:01:36 Config A/D Result=40 01:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:36 Get A/D filter: -9.255963e+061 result=40 01:01:36 Get A/D value=-858993460 result=40 01:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:36 Parameters OK 01:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:36 Set A/D data flow result=40 01:01:36 Set A/D channel type result=40 01:01:36 Set A/D encoding result=40 01:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:36 Set channel filter=0.000000e+000 result=40 01:01:36 Config A/D Result=40 01:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:36 Get A/D filter: -9.255963e+061 result=40 01:01:36 Get A/D value=-858993460 result=40 01:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:01:36 Aux= 01:01:36 Message to Camera, serial 99657 queued 01:01:44 Received message from Master: op=Shutter serial=99667 01:01:44 Shutter LASER close 01:01:45 Received message from Master: op=PointingHead serial=99671 01:01:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:01:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:01:45 Point started: ret=0 01:01:45 point_skyscan result=0 01:01:46 Check angles 01:01:46 SkyScan query 01:01:47 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.19<-21546 Statuses=0009 0009 01:01:47 Msec=0 True Az=135.96 Ze=-143.19 Az status=0009 Ze status=0009 01:01:47 Check angles 01:01:47 SkyScan query 01:01:47 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.8<-20120 Statuses=0009 0009 01:01:47 Msec=750 True Az=153.825 Ze=-121.8 Az status=0009 Ze status=0009 01:01:48 Check angles 01:01:48 SkyScan query 01:01:48 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.35<-18690 Statuses=0009 0009 01:01:48 Msec=1500 True Az=171.69 Ze=-100.35 Az status=0009 Ze status=0009 01:01:48 Check angles 01:01:48 SkyScan query 01:01:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.005<-17267 Statuses=0008 0009 01:01:49 Msec=2250 True Az=176.01 Ze=-79.005 Az status=0008 Ze status=0009 01:01:49 Check angles 01:01:49 SkyScan query 01:01:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.05<-15870 Statuses=0008 0009 01:01:50 Msec=3000 True Az=176.01 Ze=-58.05 Az status=0008 Ze status=0009 01:01:50 Check angles 01:01:50 SkyScan query 01:01:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 01:01:50 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 01:01:50 Message to Master queued w/err=0: serial=99671 error=0 01:01:55 Received message from Master: op=Filter serial=99672 01:01:55 Color wheel filter change from 0 to 0 01:01:55 FLIGetFilterPos err=0 currentPosition=0 01:01:55 FLIGetStepsRemaining err=0 RemainingSteps=0 01:01:55 Filter is already there-color wheel unchanged 01:01:56 Received message from Master: op=Shutter serial=99673 01:01:56 Shutter LASER close 01:01:56 Received message from Camera: op=State serial=99675 01:01:56 GetSingleValue result=40 Value=cccccccc 01:01:56 SkyScan query 01:01:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:56 Parameters OK 01:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:56 Set A/D data flow result=40 01:01:56 Set A/D channel type result=40 01:01:56 Set A/D encoding result=40 01:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:56 Set channel filter=0.000000e+000 result=40 01:01:56 Config A/D Result=40 01:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:56 Get A/D filter: -9.255963e+061 result=40 01:01:56 Get A/D value=-858993460 result=40 01:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:56 Parameters OK 01:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:56 Set A/D data flow result=40 01:01:56 Set A/D channel type result=40 01:01:56 Set A/D encoding result=40 01:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:56 Set channel filter=0.000000e+000 result=40 01:01:56 Config A/D Result=40 01:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:56 Get A/D filter: -9.255963e+061 result=40 01:01:56 Get A/D value=-858993460 result=40 01:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:01:56 Aux= 01:01:56 Message to Camera, serial 99675 queued 01:02:33 Received message from Master: op=PointingHead serial=99688 01:02:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:02:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:02:33 Point started: ret=0 01:02:33 point_skyscan result=0 01:02:34 Check angles 01:02:34 SkyScan query 01:02:35 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.69<-13446 Statuses=0009 0009 01:02:35 Msec=0 True Az=152.97 Ze=-21.69 Az status=0009 Ze status=0009 01:02:35 Check angles 01:02:35 SkyScan query 01:02:36 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.675<-12045 Statuses=0009 0009 01:02:36 Msec=750 True Az=135.42 Ze=-0.675 Az status=0009 Ze status=0009 01:02:36 Check angles 01:02:36 SkyScan query 01:02:36 SkyScan query done: ret=0 az=117.57<-7838 ze=20.655<-10623 Statuses=0009 0009 01:02:36 Msec=1500 True Az=117.57 Ze=20.655 Az status=0009 Ze status=0009 01:02:37 Check angles 01:02:37 SkyScan query 01:02:37 SkyScan query done: ret=0 az=99.9<-6660 ze=42.075<-9195 Statuses=0009 0009 01:02:37 Msec=2250 True Az=99.9 Ze=42.075 Az status=0009 Ze status=0009 01:02:37 Check angles 01:02:37 SkyScan query 01:02:38 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:02:38 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:02:38 Check angles 01:02:38 SkyScan query 01:02:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:02:39 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:02:39 Message to Master queued w/err=0: serial=99688 error=0 01:02:44 Received message from Master: op=Filter serial=99689 01:02:44 Color wheel filter change from 0 to 0 01:02:44 FLIGetFilterPos err=0 currentPosition=0 01:02:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:02:44 Filter is already there-color wheel unchanged 01:02:44 Received message from Master: op=Shutter serial=99690 01:02:44 Shutter LASER close 01:02:44 Received message from Camera: op=State serial=99692 01:02:44 GetSingleValue result=40 Value=cccccccc 01:02:44 SkyScan query 01:02:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:02:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:44 Parameters OK 01:02:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:44 Set A/D data flow result=40 01:02:44 Set A/D channel type result=40 01:02:44 Set A/D encoding result=40 01:02:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:44 Set channel filter=0.000000e+000 result=40 01:02:44 Config A/D Result=40 01:02:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:44 Get A/D filter: -9.255963e+061 result=40 01:02:44 Get A/D value=-858993460 result=40 01:02:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:44 Parameters OK 01:02:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:44 Set A/D data flow result=40 01:02:44 Set A/D channel type result=40 01:02:44 Set A/D encoding result=40 01:02:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:44 Set channel filter=0.000000e+000 result=40 01:02:44 Config A/D Result=40 01:02:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:44 Get A/D filter: -9.255963e+061 result=40 01:02:44 Get A/D value=-858993460 result=40 01:02:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:02:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:02:44 Aux= 01:02:44 Message to Camera, serial 99692 queued 01:03:21 Received message from Master: op=PointingHead serial=99705 01:03:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:03:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:03:22 Point started: ret=0 01:03:22 point_skyscan result=0 01:03:22 Check angles 01:03:22 SkyScan query 01:03:23 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 01:03:23 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 01:03:23 Check angles 01:03:23 SkyScan query 01:03:24 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 01:03:24 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 01:03:24 Check angles 01:03:24 SkyScan query 01:03:24 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 01:03:24 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 01:03:25 Check angles 01:03:25 SkyScan query 01:03:25 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 01:03:25 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 01:03:25 Check angles 01:03:25 SkyScan query 01:03:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:03:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:03:26 Check angles 01:03:26 SkyScan query 01:03:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:03:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:03:27 Message to Master queued w/err=0: serial=99705 error=0 01:03:32 Received message from Master: op=Filter serial=99706 01:03:32 Color wheel filter change from 0 to 0 01:03:32 FLIGetFilterPos err=0 currentPosition=0 01:03:32 FLIGetStepsRemaining err=0 RemainingSteps=0 01:03:32 Filter is already there-color wheel unchanged 01:03:32 Received message from Master: op=Shutter serial=99707 01:03:32 Shutter LASER close 01:03:32 Received message from Camera: op=State serial=99709 01:03:32 GetSingleValue result=40 Value=cccccccc 01:03:32 SkyScan query 01:03:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:03:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:32 Parameters OK 01:03:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:32 Set A/D data flow result=40 01:03:32 Set A/D channel type result=40 01:03:32 Set A/D encoding result=40 01:03:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:32 Set channel filter=0.000000e+000 result=40 01:03:32 Config A/D Result=40 01:03:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:32 Get A/D filter: -9.255963e+061 result=40 01:03:32 Get A/D value=-858993460 result=40 01:03:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:32 Parameters OK 01:03:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:32 Set A/D data flow result=40 01:03:32 Set A/D channel type result=40 01:03:32 Set A/D encoding result=40 01:03:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:32 Set channel filter=0.000000e+000 result=40 01:03:32 Config A/D Result=40 01:03:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:32 Get A/D filter: -9.255963e+061 result=40 01:03:32 Get A/D value=-858993460 result=40 01:03:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:03:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:03:32 Aux= 01:03:32 Message to Camera, serial 99709 queued 01:04:09 Received message from Master: op=PointingHead serial=99722 01:04:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:04:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:04:10 Point started: ret=0 01:04:10 point_skyscan result=0 01:04:10 Check angles 01:04:10 SkyScan query 01:04:11 SkyScan query done: ret=0 az=152.97<-10198 ze=8.61<-11426 Statuses=0009 0009 01:04:11 Msec=0 True Az=152.97 Ze=8.61 Az status=0009 Ze status=0009 01:04:11 Check angles 01:04:11 SkyScan query 01:04:12 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.75<-12850 Statuses=0009 0009 01:04:12 Msec=750 True Az=135.135 Ze=-12.75 Az status=0009 Ze status=0009 01:04:12 Check angles 01:04:12 SkyScan query 01:04:12 SkyScan query done: ret=0 az=117.3<-7820 ze=-34.185<-14279 Statuses=0009 0009 01:04:12 Msec=1500 True Az=117.3 Ze=-34.185 Az status=0009 Ze status=0009 01:04:13 Check angles 01:04:13 SkyScan query 01:04:13 SkyScan query done: ret=0 az=99.495<-6633 ze=-51.57<-15438 Statuses=0009 0009 01:04:13 Msec=2250 True Az=99.495 Ze=-51.57 Az status=0009 Ze status=0009 01:04:13 Check angles 01:04:13 SkyScan query 01:04:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 01:04:14 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 01:04:14 Check angles 01:04:14 SkyScan query 01:04:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:04:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:04:15 Message to Master queued w/err=0: serial=99722 error=0 01:04:20 Received message from Master: op=Filter serial=99723 01:04:20 Color wheel filter change from 0 to 0 01:04:20 FLIGetFilterPos err=0 currentPosition=0 01:04:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:04:20 Filter is already there-color wheel unchanged 01:04:20 Received message from Master: op=Shutter serial=99724 01:04:20 Shutter LASER close 01:04:20 Received message from Camera: op=State serial=99726 01:04:20 GetSingleValue result=40 Value=cccccccc 01:04:20 SkyScan query 01:04:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:04:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:21 Parameters OK 01:04:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:21 Set A/D data flow result=40 01:04:21 Set A/D channel type result=40 01:04:21 Set A/D encoding result=40 01:04:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:21 Set channel filter=0.000000e+000 result=40 01:04:21 Config A/D Result=40 01:04:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:21 Get A/D filter: -9.255963e+061 result=40 01:04:21 Get A/D value=-858993460 result=40 01:04:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:21 Parameters OK 01:04:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:21 Set A/D data flow result=40 01:04:21 Set A/D channel type result=40 01:04:21 Set A/D encoding result=40 01:04:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:21 Set channel filter=0.000000e+000 result=40 01:04:21 Config A/D Result=40 01:04:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:21 Get A/D filter: -9.255963e+061 result=40 01:04:21 Get A/D value=-858993460 result=40 01:04:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:04:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:04:21 Aux= 01:04:21 Message to Camera, serial 99726 queued 01:04:57 Received message from Master: op=PointingHead serial=99739 01:04:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:04:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:04:58 Point started: ret=0 01:04:58 point_skyscan result=0 01:04:58 Check angles 01:04:58 SkyScan query 01:04:59 SkyScan query done: ret=0 az=108.825<-7255 ze=-81<-17400 Statuses=0009 0009 01:04:59 Msec=0 True Az=108.825 Ze=-81 Az status=0009 Ze status=0009 01:04:59 Check angles 01:04:59 SkyScan query 01:05:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.39<-18826 Statuses=0008 0009 01:05:00 Msec=750 True Az=112.995 Ze=-102.39 Az status=0008 Ze status=0009 01:05:00 Check angles 01:05:00 SkyScan query 01:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 01:05:01 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 01:05:01 Check angles 01:05:01 SkyScan query 01:05:01 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.735<-21649 Statuses=0008 0009 01:05:01 Msec=2250 True Az=112.98 Ze=-144.735 Az status=0008 Ze status=0009 01:05:02 Check angles 01:05:02 SkyScan query 01:05:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.69<-23046 Statuses=0008 0009 01:05:02 Msec=3000 True Az=112.995 Ze=-165.69 Az status=0008 Ze status=0009 01:05:02 Check angles 01:05:02 SkyScan query 01:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:05:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:05:03 Message to Master queued w/err=0: serial=99739 error=0 01:05:08 Received message from Master: op=Filter serial=99740 01:05:08 Color wheel filter change from 0 to 0 01:05:08 FLIGetFilterPos err=0 currentPosition=0 01:05:08 FLIGetStepsRemaining err=0 RemainingSteps=0 01:05:08 Filter is already there-color wheel unchanged 01:05:08 Received message from Master: op=Shutter serial=99741 01:05:08 Shutter LASER open 01:05:08 Received message from Camera: op=State serial=99743 01:05:08 GetSingleValue result=40 Value=cccccccc 01:05:08 SkyScan query 01:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:05:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:09 Parameters OK 01:05:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:09 Set A/D data flow result=40 01:05:09 Set A/D channel type result=40 01:05:09 Set A/D encoding result=40 01:05:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:09 Set channel filter=0.000000e+000 result=40 01:05:09 Config A/D Result=40 01:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:09 Get A/D filter: -9.255963e+061 result=40 01:05:09 Get A/D value=-858993460 result=40 01:05:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:09 Parameters OK 01:05:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:09 Set A/D data flow result=40 01:05:09 Set A/D channel type result=40 01:05:09 Set A/D encoding result=40 01:05:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:09 Set channel filter=0.000000e+000 result=40 01:05:09 Config A/D Result=40 01:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:09 Get A/D filter: -9.255963e+061 result=40 01:05:09 Get A/D value=-858993460 result=40 01:05:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:05:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:05:09 Aux= 01:05:09 Message to Camera, serial 99743 queued 01:05:17 Received message from Master: op=Shutter serial=99753 01:05:17 Shutter LASER close 01:05:18 Received message from Master: op=PointingHead serial=99757 01:05:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:05:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:05:18 Point started: ret=0 01:05:18 point_skyscan result=0 01:05:19 Check angles 01:05:19 SkyScan query 01:05:19 SkyScan query done: ret=0 az=89.88<-5992 ze=157.215<-1519 Statuses=0009 0009 01:05:19 Msec=0 True Az=89.88 Ze=157.215 Az status=0009 Ze status=0009 01:05:19 Check angles 01:05:19 SkyScan query 01:05:20 SkyScan query done: ret=0 az=72.33<-4822 ze=136.26<-2916 Statuses=0009 0009 01:05:20 Msec=750 True Az=72.33 Ze=136.26 Az status=0009 Ze status=0009 01:05:20 Check angles 01:05:20 SkyScan query 01:05:21 SkyScan query done: ret=0 az=54.975<-3665 ze=115.335<-4311 Statuses=0009 0009 01:05:21 Msec=1500 True Az=54.975 Ze=115.335 Az status=0009 Ze status=0009 01:05:21 Check angles 01:05:21 SkyScan query 01:05:22 SkyScan query done: ret=0 az=40.86<-2724 ze=94.335<-5711 Statuses=0009 0009 01:05:22 Msec=2250 True Az=40.86 Ze=94.335 Az status=0009 Ze status=0009 01:05:22 Check angles 01:05:22 SkyScan query 01:05:22 SkyScan query done: ret=0 az=40.995<-2733 ze=73.395<-7107 Statuses=0008 0009 01:05:22 Msec=3000 True Az=40.995 Ze=73.395 Az status=0008 Ze status=0009 01:05:22 Check angles 01:05:22 SkyScan query 01:05:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.815<-8479 Statuses=0008 0009 01:05:23 Msec=3750 True Az=40.995 Ze=52.815 Az status=0008 Ze status=0009 01:05:23 Check angles 01:05:23 SkyScan query 01:05:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:05:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:05:24 Message to Master queued w/err=0: serial=99757 error=0 01:05:29 Received message from Master: op=Filter serial=99758 01:05:29 Color wheel filter change from 0 to 0 01:05:29 FLIGetFilterPos err=0 currentPosition=0 01:05:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:05:29 Filter is already there-color wheel unchanged 01:05:29 Received message from Master: op=Shutter serial=99759 01:05:29 Shutter LASER close 01:05:29 Received message from Camera: op=State serial=99761 01:05:29 GetSingleValue result=40 Value=cccccccc 01:05:29 SkyScan query 01:05:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:05:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:30 Parameters OK 01:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:30 Set A/D data flow result=40 01:05:30 Set A/D channel type result=40 01:05:30 Set A/D encoding result=40 01:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:30 Set channel filter=0.000000e+000 result=40 01:05:30 Config A/D Result=40 01:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:30 Get A/D filter: -9.255963e+061 result=40 01:05:30 Get A/D value=-858993460 result=40 01:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:30 Parameters OK 01:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:30 Set A/D data flow result=40 01:05:30 Set A/D channel type result=40 01:05:30 Set A/D encoding result=40 01:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:30 Set channel filter=0.000000e+000 result=40 01:05:30 Config A/D Result=40 01:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:30 Get A/D filter: -9.255963e+061 result=40 01:05:30 Get A/D value=-858993460 result=40 01:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:05:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:05:30 Aux= 01:05:30 Message to Camera, serial 99761 queued 01:06:07 Received message from Master: op=PointingHead serial=99774 01:06:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:06:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:06:07 Point started: ret=0 01:06:07 point_skyscan result=0 01:06:08 Check angles 01:06:08 SkyScan query 01:06:08 SkyScan query done: ret=0 az=40.995<-2733 ze=21.45<-10570 Statuses=0008 0009 01:06:08 Msec=0 True Az=40.995 Ze=21.45 Az status=0008 Ze status=0009 01:06:09 Check angles 01:06:09 SkyScan query [UTC 2018-12-13 01:06:09] 01:06:09 SkyScan query done: ret=0 az=41.01<-2734 ze=0.03<-11998 Statuses=0008 0009 01:06:09 Msec=750 True Az=41.01 Ze=0.03 Az status=0008 Ze status=0009 01:06:09 Check angles 01:06:09 SkyScan query 01:06:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.925<-13395 Statuses=0008 0009 01:06:10 Msec=1500 True Az=40.995 Ze=-20.925 Az status=0008 Ze status=0009 01:06:10 Check angles 01:06:10 SkyScan query 01:06:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:06:11 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:06:11 Check angles 01:06:11 SkyScan query 01:06:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:06:11 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:06:11 Message to Master queued w/err=0: serial=99774 error=0 01:06:16 Received message from Master: op=Filter serial=99775 01:06:16 Color wheel filter change from 0 to 0 01:06:16 FLIGetFilterPos err=0 currentPosition=0 01:06:16 FLIGetStepsRemaining err=0 RemainingSteps=0 01:06:16 Filter is already there-color wheel unchanged 01:06:17 Received message from Master: op=Shutter serial=99776 01:06:17 Shutter LASER close 01:06:17 Received message from Camera: op=State serial=99778 01:06:17 GetSingleValue result=40 Value=cccccccc 01:06:17 SkyScan query 01:06:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:06:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:17 Parameters OK 01:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:17 Set A/D data flow result=40 01:06:17 Set A/D channel type result=40 01:06:17 Set A/D encoding result=40 01:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:17 Set channel filter=0.000000e+000 result=40 01:06:17 Config A/D Result=40 01:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:17 Get A/D filter: -9.255963e+061 result=40 01:06:17 Get A/D value=-858993460 result=40 01:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:17 Parameters OK 01:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:17 Set A/D data flow result=40 01:06:17 Set A/D channel type result=40 01:06:17 Set A/D encoding result=40 01:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:17 Set channel filter=0.000000e+000 result=40 01:06:17 Config A/D Result=40 01:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:17 Get A/D filter: -9.255963e+061 result=40 01:06:17 Get A/D value=-858993460 result=40 01:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:06:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:06:17 Aux= 01:06:17 Message to Camera, serial 99778 queued 01:06:53 Received message from Master: op=PointingHead serial=99790 01:06:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:06:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:06:53 Point started: ret=0 01:06:53 point_skyscan result=0 01:06:54 Check angles 01:06:54 SkyScan query 01:06:55 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.085<-16539 Statuses=0009 0009 01:06:55 Msec=0 True Az=63.78 Ze=-68.085 Az status=0009 Ze status=0009 01:06:55 Check angles 01:06:55 SkyScan query 01:06:56 SkyScan query done: ret=0 az=81.135<-5409 ze=-89.055<-17937 Statuses=0009 0009 01:06:56 Msec=750 True Az=81.135 Ze=-89.055 Az status=0009 Ze status=0009 01:06:56 Check angles 01:06:56 SkyScan query 01:06:56 SkyScan query done: ret=0 az=98.73<-6582 ze=-109.98<-19332 Statuses=0009 0009 01:06:56 Msec=1500 True Az=98.73 Ze=-109.98 Az status=0009 Ze status=0009 01:06:56 Check angles 01:06:56 SkyScan query 01:06:57 SkyScan query done: ret=0 az=116.565<-7771 ze=-131.385<-20759 Statuses=0009 0009 01:06:57 Msec=2250 True Az=116.565 Ze=-131.385 Az status=0009 Ze status=0009 01:06:57 Check angles 01:06:57 SkyScan query 01:06:58 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 01:06:58 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 01:06:58 Check angles 01:06:58 SkyScan query 01:06:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:06:59 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:06:59 Message to Master queued w/err=0: serial=99790 error=0 01:07:04 Received message from Master: op=Filter serial=99791 01:07:04 Color wheel filter change from 0 to 0 01:07:04 FLIGetFilterPos err=0 currentPosition=0 01:07:04 FLIGetStepsRemaining err=0 RemainingSteps=0 01:07:04 Filter is already there-color wheel unchanged 01:07:04 Received message from Master: op=Shutter serial=99792 01:07:04 Shutter LASER close 01:07:04 Received message from Camera: op=State serial=99794 01:07:04 GetSingleValue result=40 Value=cccccccc 01:07:04 SkyScan query 01:07:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:07:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:04 Parameters OK 01:07:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:04 Set A/D data flow result=40 01:07:04 Set A/D channel type result=40 01:07:04 Set A/D encoding result=40 01:07:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:04 Set channel filter=0.000000e+000 result=40 01:07:04 Config A/D Result=40 01:07:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:04 Get A/D filter: -9.255963e+061 result=40 01:07:04 Get A/D value=-858993460 result=40 01:07:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:04 Parameters OK 01:07:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:04 Set A/D data flow result=40 01:07:04 Set A/D channel type result=40 01:07:04 Set A/D encoding result=40 01:07:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:04 Set channel filter=0.000000e+000 result=40 01:07:04 Config A/D Result=40 01:07:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:04 Get A/D filter: -9.255963e+061 result=40 01:07:04 Get A/D value=-858993460 result=40 01:07:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:07:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:07:04 Aux= 01:07:04 Message to Camera, serial 99794 queued 01:07:41 Received message from Master: op=PointingHead serial=99807 01:07:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:07:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:07:42 Point started: ret=0 01:07:42 point_skyscan result=0 01:07:42 Check angles 01:07:42 SkyScan query 01:07:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 01:07:43 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 01:07:43 Check angles 01:07:43 SkyScan query 01:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:07:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:07:44 Message to Master queued w/err=0: serial=99807 error=0 01:07:49 Received message from Master: op=Filter serial=99808 01:07:49 Color wheel filter change from 0 to 0 01:07:49 FLIGetFilterPos err=0 currentPosition=0 01:07:49 FLIGetStepsRemaining err=0 RemainingSteps=0 01:07:49 Filter is already there-color wheel unchanged 01:07:49 Received message from Master: op=Shutter serial=99809 01:07:49 Shutter LASER open 01:07:49 Received message from Camera: op=State serial=99811 01:07:49 GetSingleValue result=40 Value=cccccccc 01:07:49 SkyScan query 01:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:07:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:50 Parameters OK 01:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:50 Set A/D data flow result=40 01:07:50 Set A/D channel type result=40 01:07:50 Set A/D encoding result=40 01:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:50 Set channel filter=0.000000e+000 result=40 01:07:50 Config A/D Result=40 01:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:50 Get A/D filter: -9.255963e+061 result=40 01:07:50 Get A/D value=-858993460 result=40 01:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:50 Parameters OK 01:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:50 Set A/D data flow result=40 01:07:50 Set A/D channel type result=40 01:07:50 Set A/D encoding result=40 01:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:50 Set channel filter=0.000000e+000 result=40 01:07:50 Config A/D Result=40 01:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:50 Get A/D filter: -9.255963e+061 result=40 01:07:50 Get A/D value=-858993460 result=40 01:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:07:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:07:50 Aux= 01:07:50 Message to Camera, serial 99811 queued 01:07:58 Received message from Master: op=Shutter serial=99821 01:07:58 Shutter LASER close 01:07:58 Received message from Master: op=PointingHead serial=99825 01:07:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:07:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:07:59 Point started: ret=0 01:07:59 point_skyscan result=0 01:08:00 Check angles 01:08:00 SkyScan query 01:08:00 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.415<-21561 Statuses=0009 0009 01:08:00 Msec=0 True Az=135.735 Ze=-143.415 Az status=0009 Ze status=0009 01:08:00 Check angles 01:08:00 SkyScan query 01:08:01 SkyScan query done: ret=0 az=153.195<-10213 ze=-122.49<-20166 Statuses=0009 0009 01:08:01 Msec=750 True Az=153.195 Ze=-122.49 Az status=0009 Ze status=0009 01:08:01 Check angles 01:08:01 SkyScan query 01:08:02 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.58<-18772 Statuses=0009 0009 01:08:02 Msec=1500 True Az=170.79 Ze=-101.58 Az status=0009 Ze status=0009 01:08:02 Check angles 01:08:02 SkyScan query 01:08:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.58<-17372 Statuses=0008 0009 01:08:02 Msec=2250 True Az=176.01 Ze=-80.58 Az status=0008 Ze status=0009 01:08:03 Check angles 01:08:03 SkyScan query 01:08:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.64<-15976 Statuses=0008 0009 01:08:03 Msec=3000 True Az=176.01 Ze=-59.64 Az status=0008 Ze status=0009 01:08:03 Check angles 01:08:03 SkyScan query 01:08:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:08:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:08:04 Message to Master queued w/err=0: serial=99825 error=0 01:08:09 Received message from Master: op=Filter serial=99826 01:08:09 Color wheel filter change from 0 to 0 01:08:09 FLIGetFilterPos err=0 currentPosition=0 01:08:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:08:09 Filter is already there-color wheel unchanged 01:08:09 Received message from Master: op=Shutter serial=99827 01:08:09 Shutter LASER close 01:08:09 Received message from Camera: op=State serial=99829 01:08:09 GetSingleValue result=40 Value=cccccccc 01:08:09 SkyScan query 01:08:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:08:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:10 Parameters OK 01:08:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:10 Set A/D data flow result=40 01:08:10 Set A/D channel type result=40 01:08:10 Set A/D encoding result=40 01:08:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:10 Set channel filter=0.000000e+000 result=40 01:08:10 Config A/D Result=40 01:08:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:10 Get A/D filter: -9.255963e+061 result=40 01:08:10 Get A/D value=-858993460 result=40 01:08:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:10 Parameters OK 01:08:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:10 Set A/D data flow result=40 01:08:10 Set A/D channel type result=40 01:08:10 Set A/D encoding result=40 01:08:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:10 Set channel filter=0.000000e+000 result=40 01:08:10 Config A/D Result=40 01:08:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:10 Get A/D filter: -9.255963e+061 result=40 01:08:10 Get A/D value=-858993460 result=40 01:08:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:08:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:08:10 Aux= 01:08:10 Message to Camera, serial 99829 queued 01:08:47 Received message from Master: op=PointingHead serial=99842 01:08:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:08:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:08:47 Point started: ret=0 01:08:47 point_skyscan result=0 01:08:48 Check angles 01:08:48 SkyScan query 01:08:48 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.525<-13435 Statuses=0009 0009 01:08:48 Msec=0 True Az=152.745 Ze=-21.525 Az status=0009 Ze status=0009 01:08:49 Check angles 01:08:49 SkyScan query 01:08:49 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.54<-12036 Statuses=0009 0009 01:08:49 Msec=750 True Az=135.36 Ze=-0.54 Az status=0009 Ze status=0009 01:08:49 Check angles 01:08:49 SkyScan query 01:08:50 SkyScan query done: ret=0 az=117.795<-7853 ze=20.385<-10641 Statuses=0009 0009 01:08:50 Msec=1500 True Az=117.795 Ze=20.385 Az status=0009 Ze status=0009 01:08:50 Check angles 01:08:50 SkyScan query 01:08:51 SkyScan query done: ret=0 az=100.41<-6694 ze=41.385<-9241 Statuses=0009 0009 01:08:51 Msec=2250 True Az=100.41 Ze=41.385 Az status=0009 Ze status=0009 01:08:51 Check angles 01:08:51 SkyScan query 01:08:51 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 01:08:51 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 01:08:52 Check angles 01:08:52 SkyScan query 01:08:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:08:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:08:52 Message to Master queued w/err=0: serial=99842 error=0 01:08:57 Received message from Master: op=Filter serial=99843 01:08:57 Color wheel filter change from 0 to 0 01:08:57 FLIGetFilterPos err=0 currentPosition=0 01:08:57 FLIGetStepsRemaining err=0 RemainingSteps=0 01:08:57 Filter is already there-color wheel unchanged 01:08:57 Received message from Master: op=Shutter serial=99844 01:08:57 Shutter LASER close 01:08:57 Received message from Camera: op=State serial=99846 01:08:57 GetSingleValue result=40 Value=cccccccc 01:08:57 SkyScan query 01:08:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:08:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:58 Parameters OK 01:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:58 Set A/D data flow result=40 01:08:58 Set A/D channel type result=40 01:08:58 Set A/D encoding result=40 01:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:58 Set channel filter=0.000000e+000 result=40 01:08:58 Config A/D Result=40 01:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:58 Get A/D filter: -9.255963e+061 result=40 01:08:58 Get A/D value=-858993460 result=40 01:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:58 Parameters OK 01:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:58 Set A/D data flow result=40 01:08:58 Set A/D channel type result=40 01:08:58 Set A/D encoding result=40 01:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:58 Set channel filter=0.000000e+000 result=40 01:08:58 Config A/D Result=40 01:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:58 Get A/D filter: -9.255963e+061 result=40 01:08:58 Get A/D value=-858993460 result=40 01:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:08:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:08:58 Aux= 01:08:58 Message to Camera, serial 99846 queued 01:09:35 Received message from Master: op=PointingHead serial=99859 01:09:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:09:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:09:35 Point started: ret=0 01:09:35 point_skyscan result=0 01:09:36 Check angles 01:09:36 SkyScan query 01:09:36 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 01:09:36 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 01:09:37 Check angles 01:09:37 SkyScan query 01:09:37 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 01:09:37 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 01:09:37 Check angles 01:09:37 SkyScan query 01:09:38 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 01:09:38 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 01:09:38 Check angles 01:09:38 SkyScan query 01:09:39 SkyScan query done: ret=0 az=162.12<-10808 ze=38.505<-9433 Statuses=0009 0008 01:09:39 Msec=2250 True Az=162.12 Ze=38.505 Az status=0009 Ze status=0008 01:09:39 Check angles 01:09:39 SkyScan query 01:09:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:09:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:09:40 Check angles 01:09:40 SkyScan query 01:09:40 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:09:40 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:09:40 Message to Master queued w/err=0: serial=99859 error=0 01:09:45 Received message from Master: op=Filter serial=99860 01:09:45 Color wheel filter change from 0 to 0 01:09:45 FLIGetFilterPos err=0 currentPosition=0 01:09:45 FLIGetStepsRemaining err=0 RemainingSteps=0 01:09:45 Filter is already there-color wheel unchanged 01:09:45 Received message from Master: op=Shutter serial=99861 01:09:45 Shutter LASER close 01:09:45 Received message from Camera: op=State serial=99863 01:09:45 GetSingleValue result=40 Value=cccccccc 01:09:45 SkyScan query 01:09:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:09:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:46 Parameters OK 01:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:46 Set A/D data flow result=40 01:09:46 Set A/D channel type result=40 01:09:46 Set A/D encoding result=40 01:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:46 Set channel filter=0.000000e+000 result=40 01:09:46 Config A/D Result=40 01:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:46 Get A/D filter: -9.255963e+061 result=40 01:09:46 Get A/D value=-858993460 result=40 01:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:46 Parameters OK 01:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:46 Set A/D data flow result=40 01:09:46 Set A/D channel type result=40 01:09:46 Set A/D encoding result=40 01:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:46 Set channel filter=0.000000e+000 result=40 01:09:46 Config A/D Result=40 01:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:46 Get A/D filter: -9.255963e+061 result=40 01:09:46 Get A/D value=-858993460 result=40 01:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:09:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:09:46 Aux= 01:09:46 Message to Camera, serial 99863 queued 01:10:23 Received message from Master: op=PointingHead serial=99876 01:10:23 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:10:23 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:10:23 Point started: ret=0 01:10:23 point_skyscan result=0 01:10:24 Check angles 01:10:24 SkyScan query 01:10:25 SkyScan query done: ret=0 az=152.97<-10198 ze=8.685<-11421 Statuses=0009 0009 01:10:25 Msec=0 True Az=152.97 Ze=8.685 Az status=0009 Ze status=0009 01:10:25 Check angles 01:10:25 SkyScan query 01:10:25 SkyScan query done: ret=0 az=135.615<-9041 ze=-12.255<-12817 Statuses=0009 0009 01:10:25 Msec=750 True Az=135.615 Ze=-12.255 Az status=0009 Ze status=0009 01:10:25 Check angles 01:10:25 SkyScan query 01:10:26 SkyScan query done: ret=0 az=118.05<-7870 ze=-33.195<-14213 Statuses=0009 0009 01:10:26 Msec=1500 True Az=118.05 Ze=-33.195 Az status=0009 Ze status=0009 01:10:26 Check angles 01:10:26 SkyScan query 01:10:27 SkyScan query done: ret=0 az=100.335<-6689 ze=-51.555<-15437 Statuses=0009 0009 01:10:27 Msec=2250 True Az=100.335 Ze=-51.555 Az status=0009 Ze status=0009 01:10:27 Check angles 01:10:27 SkyScan query 01:10:28 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:10:28 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:10:28 Check angles 01:10:28 SkyScan query 01:10:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:10:28 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:10:28 Message to Master queued w/err=0: serial=99876 error=0 01:10:33 Received message from Master: op=Filter serial=99877 01:10:33 Color wheel filter change from 0 to 0 01:10:33 FLIGetFilterPos err=0 currentPosition=0 01:10:33 FLIGetStepsRemaining err=0 RemainingSteps=0 01:10:33 Filter is already there-color wheel unchanged 01:10:33 Received message from Master: op=Shutter serial=99878 01:10:33 Shutter LASER close 01:10:34 Received message from Camera: op=State serial=99880 01:10:34 GetSingleValue result=40 Value=cccccccc 01:10:34 SkyScan query 01:10:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:10:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:34 Parameters OK 01:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:34 Set A/D data flow result=40 01:10:34 Set A/D channel type result=40 01:10:34 Set A/D encoding result=40 01:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:34 Set channel filter=0.000000e+000 result=40 01:10:34 Config A/D Result=40 01:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:34 Get A/D filter: -9.255963e+061 result=40 01:10:34 Get A/D value=-858993460 result=40 01:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:34 Parameters OK 01:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:34 Set A/D data flow result=40 01:10:34 Set A/D channel type result=40 01:10:34 Set A/D encoding result=40 01:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:34 Set channel filter=0.000000e+000 result=40 01:10:34 Config A/D Result=40 01:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:34 Get A/D filter: -9.255963e+061 result=40 01:10:34 Get A/D value=-858993460 result=40 01:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:10:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:10:34 Aux= 01:10:34 Message to Camera, serial 99880 queued 01:11:11 Received message from Master: op=PointingHead serial=99893 01:11:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:11:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:11:11 Point started: ret=0 01:11:11 point_skyscan result=0 01:11:12 Check angles 01:11:12 SkyScan query 01:11:13 SkyScan query done: ret=0 az=108.795<-7253 ze=-80.985<-17399 Statuses=0009 0009 01:11:13 Msec=0 True Az=108.795 Ze=-80.985 Az status=0009 Ze status=0009 01:11:13 Check angles 01:11:13 SkyScan query 01:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.925<-18795 Statuses=0008 0009 01:11:13 Msec=750 True Az=112.995 Ze=-101.925 Az status=0008 Ze status=0009 01:11:14 Check angles 01:11:14 SkyScan query 01:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 01:11:14 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 01:11:14 Check angles 01:11:14 SkyScan query 01:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.835<-21589 Statuses=0008 0009 01:11:15 Msec=2250 True Az=112.995 Ze=-143.835 Az status=0008 Ze status=0009 01:11:15 Check angles 01:11:15 SkyScan query 01:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.79<-22986 Statuses=0008 0009 01:11:16 Msec=3000 True Az=112.995 Ze=-164.79 Az status=0008 Ze status=0009 01:11:16 Check angles 01:11:16 SkyScan query 01:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:11:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:11:16 Message to Master queued w/err=0: serial=99893 error=0 01:11:21 Received message from Master: op=Filter serial=99894 01:11:21 Color wheel filter change from 0 to 0 01:11:21 FLIGetFilterPos err=0 currentPosition=0 01:11:21 FLIGetStepsRemaining err=0 RemainingSteps=0 01:11:21 Filter is already there-color wheel unchanged 01:11:22 Received message from Master: op=Shutter serial=99895 01:11:22 Shutter LASER open 01:11:22 Received message from Camera: op=State serial=99897 01:11:22 GetSingleValue result=40 Value=cccccccc 01:11:22 SkyScan query 01:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:11:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:22 Parameters OK 01:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:22 Set A/D data flow result=40 01:11:22 Set A/D channel type result=40 01:11:22 Set A/D encoding result=40 01:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:22 Set channel filter=0.000000e+000 result=40 01:11:22 Config A/D Result=40 01:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:22 Get A/D filter: -9.255963e+061 result=40 01:11:22 Get A/D value=-858993460 result=40 01:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:22 Parameters OK 01:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:22 Set A/D data flow result=40 01:11:22 Set A/D channel type result=40 01:11:22 Set A/D encoding result=40 01:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:22 Set channel filter=0.000000e+000 result=40 01:11:22 Config A/D Result=40 01:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:22 Get A/D filter: -9.255963e+061 result=40 01:11:22 Get A/D value=-858993460 result=40 01:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:11:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:11:22 Aux= 01:11:22 Message to Camera, serial 99897 queued 01:11:31 Received message from Master: op=Shutter serial=99907 01:11:31 Shutter LASER close 01:11:31 Received message from Master: op=PointingHead serial=99911 01:11:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:11:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:11:32 Point started: ret=0 01:11:32 point_skyscan result=0 01:11:32 Check angles 01:11:32 SkyScan query 01:11:33 SkyScan query done: ret=0 az=90.12<-6008 ze=157.515<-1499 Statuses=0009 0009 01:11:33 Msec=0 True Az=90.12 Ze=157.515 Az status=0009 Ze status=0009 01:11:33 Check angles 01:11:33 SkyScan query 01:11:34 SkyScan query done: ret=0 az=72.705<-4847 ze=136.53<-2898 Statuses=0009 0009 01:11:34 Msec=750 True Az=72.705 Ze=136.53 Az status=0009 Ze status=0009 01:11:34 Check angles 01:11:34 SkyScan query 01:11:34 SkyScan query done: ret=0 az=55.155<-3677 ze=115.605<-4293 Statuses=0009 0009 01:11:34 Msec=1500 True Az=55.155 Ze=115.605 Az status=0009 Ze status=0009 01:11:35 Check angles 01:11:35 SkyScan query 01:11:35 SkyScan query done: ret=0 az=40.86<-2724 ze=94.185<-5721 Statuses=0009 0009 01:11:35 Msec=2250 True Az=40.86 Ze=94.185 Az status=0009 Ze status=0009 01:11:35 Check angles 01:11:35 SkyScan query 01:11:36 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 01:11:36 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 01:11:36 Check angles 01:11:36 SkyScan query 01:11:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 01:11:37 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 01:11:37 Check angles 01:11:37 SkyScan query 01:11:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:11:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:11:37 Message to Master queued w/err=0: serial=99911 error=0 01:11:42 Received message from Master: op=Filter serial=99912 01:11:42 Color wheel filter change from 0 to 0 01:11:42 FLIGetFilterPos err=0 currentPosition=0 01:11:42 FLIGetStepsRemaining err=0 RemainingSteps=0 01:11:42 Filter is already there-color wheel unchanged 01:11:43 Received message from Master: op=Shutter serial=99913 01:11:43 Shutter LASER close 01:11:43 Received message from Camera: op=State serial=99915 01:11:43 GetSingleValue result=40 Value=cccccccc 01:11:43 SkyScan query 01:11:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:11:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:43 Parameters OK 01:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:43 Set A/D data flow result=40 01:11:43 Set A/D channel type result=40 01:11:43 Set A/D encoding result=40 01:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:43 Set channel filter=0.000000e+000 result=40 01:11:43 Config A/D Result=40 01:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:43 Get A/D filter: -9.255963e+061 result=40 01:11:43 Get A/D value=-858993460 result=40 01:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:43 Parameters OK 01:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:43 Set A/D data flow result=40 01:11:43 Set A/D channel type result=40 01:11:43 Set A/D encoding result=40 01:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:43 Set channel filter=0.000000e+000 result=40 01:11:43 Config A/D Result=40 01:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:43 Get A/D filter: -9.255963e+061 result=40 01:11:43 Get A/D value=-858993460 result=40 01:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:11:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:11:43 Aux= 01:11:43 Message to Camera, serial 99915 queued 01:12:20 Received message from Master: op=PointingHead serial=99928 01:12:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:12:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:12:21 Point started: ret=0 01:12:21 point_skyscan result=0 01:12:21 Check angles 01:12:21 SkyScan query 01:12:22 SkyScan query done: ret=0 az=40.995<-2733 ze=21.24<-10584 Statuses=0008 0009 01:12:22 Msec=0 True Az=40.995 Ze=21.24 Az status=0008 Ze status=0009 01:12:22 Check angles 01:12:22 SkyScan query 01:12:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.165<-12011 Statuses=0008 0009 01:12:23 Msec=750 True Az=40.995 Ze=-0.165 Az status=0008 Ze status=0009 01:12:23 Check angles 01:12:23 SkyScan query 01:12:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.105<-13407 Statuses=0008 0009 01:12:23 Msec=1500 True Az=40.995 Ze=-21.105 Az status=0008 Ze status=0009 01:12:24 Check angles 01:12:24 SkyScan query 01:12:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 01:12:24 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 01:12:24 Check angles 01:12:24 SkyScan query 01:12:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:12:25 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:12:25 Message to Master queued w/err=0: serial=99928 error=0 01:12:30 Received message from Master: op=Filter serial=99929 01:12:30 Color wheel filter change from 0 to 0 01:12:30 FLIGetFilterPos err=0 currentPosition=0 01:12:30 FLIGetStepsRemaining err=0 RemainingSteps=0 01:12:30 Filter is already there-color wheel unchanged 01:12:30 Received message from Master: op=Shutter serial=99930 01:12:30 Shutter LASER close 01:12:30 Received message from Camera: op=State serial=99932 01:12:30 GetSingleValue result=40 Value=cccccccc 01:12:30 SkyScan query 01:12:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:12:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:31 Parameters OK 01:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:31 Set A/D data flow result=40 01:12:31 Set A/D channel type result=40 01:12:31 Set A/D encoding result=40 01:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:31 Set channel filter=0.000000e+000 result=40 01:12:31 Config A/D Result=40 01:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:31 Get A/D filter: -9.255963e+061 result=40 01:12:31 Get A/D value=-858993460 result=40 01:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:31 Parameters OK 01:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:31 Set A/D data flow result=40 01:12:31 Set A/D channel type result=40 01:12:31 Set A/D encoding result=40 01:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:31 Set channel filter=0.000000e+000 result=40 01:12:31 Config A/D Result=40 01:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:31 Get A/D filter: -9.255963e+061 result=40 01:12:31 Get A/D value=-858993460 result=40 01:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:12:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:12:31 Aux= 01:12:31 Message to Camera, serial 99932 queued 01:13:08 Received message from Master: op=PointingHead serial=99945 01:13:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:13:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:13:08 Point started: ret=0 01:13:08 point_skyscan result=0 01:13:09 Check angles 01:13:09 SkyScan query 01:13:09 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.07<-16538 Statuses=0009 0009 01:13:09 Msec=0 True Az=63.765 Ze=-68.07 Az status=0009 Ze status=0009 01:13:09 Check angles 01:13:09 SkyScan query 01:13:10 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.49<-17966 Statuses=0009 0009 01:13:10 Msec=750 True Az=81.615 Ze=-89.49 Az status=0009 Ze status=0009 01:13:10 Check angles 01:13:10 SkyScan query 01:13:11 SkyScan query done: ret=0 az=99.555<-6637 ze=-110.865<-19391 Statuses=0009 0009 01:13:11 Msec=1500 True Az=99.555 Ze=-110.865 Az status=0009 Ze status=0009 01:13:11 Check angles 01:13:11 SkyScan query 01:13:12 SkyScan query done: ret=0 az=117.465<-7831 ze=-132.225<-20815 Statuses=0009 0009 01:13:12 Msec=2250 True Az=117.465 Ze=-132.225 Az status=0009 Ze status=0009 01:13:12 Check angles 01:13:12 SkyScan query 01:13:12 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 01:13:12 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 01:13:12 Check angles 01:13:12 SkyScan query 01:13:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:13:13 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:13:13 Message to Master queued w/err=0: serial=99945 error=0 01:13:18 Received message from Master: op=Filter serial=99946 01:13:18 Color wheel filter change from 0 to 0 01:13:18 FLIGetFilterPos err=0 currentPosition=0 01:13:18 FLIGetStepsRemaining err=0 RemainingSteps=0 01:13:18 Filter is already there-color wheel unchanged 01:13:18 Received message from Master: op=Shutter serial=99947 01:13:18 Shutter LASER close 01:13:18 Received message from Camera: op=State serial=99949 01:13:18 GetSingleValue result=40 Value=cccccccc 01:13:18 SkyScan query 01:13:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:13:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:19 Parameters OK 01:13:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:19 Set A/D data flow result=40 01:13:19 Set A/D channel type result=40 01:13:19 Set A/D encoding result=40 01:13:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:19 Set channel filter=0.000000e+000 result=40 01:13:19 Config A/D Result=40 01:13:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:19 Get A/D filter: -9.255963e+061 result=40 01:13:19 Get A/D value=-858993460 result=40 01:13:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:19 Parameters OK 01:13:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:19 Set A/D data flow result=40 01:13:19 Set A/D channel type result=40 01:13:19 Set A/D encoding result=40 01:13:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:19 Set channel filter=0.000000e+000 result=40 01:13:19 Config A/D Result=40 01:13:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:19 Get A/D filter: -9.255963e+061 result=40 01:13:19 Get A/D value=-858993460 result=40 01:13:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:13:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:13:19 Aux= 01:13:19 Message to Camera, serial 99949 queued 01:13:56 Received message from Master: op=PointingHead serial=99962 01:13:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:13:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:13:56 Point started: ret=0 01:13:56 point_skyscan result=0 01:13:57 Check angles 01:13:57 SkyScan query 01:13:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.345<-23423 Statuses=0009 0009 01:13:57 Msec=0 True Az=113.01 Ze=-171.345 Az status=0009 Ze status=0009 01:13:58 Check angles 01:13:58 SkyScan query 01:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:13:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:13:58 Message to Master queued w/err=0: serial=99962 error=0 01:14:03 Received message from Master: op=Filter serial=99963 01:14:03 Color wheel filter change from 0 to 0 01:14:03 FLIGetFilterPos err=0 currentPosition=0 01:14:03 FLIGetStepsRemaining err=0 RemainingSteps=0 01:14:03 Filter is already there-color wheel unchanged 01:14:03 Received message from Master: op=Shutter serial=99964 01:14:03 Shutter LASER open 01:14:03 Received message from Camera: op=State serial=99966 01:14:03 GetSingleValue result=40 Value=cccccccc 01:14:03 SkyScan query 01:14:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:14:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:04 Parameters OK 01:14:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:04 Set A/D data flow result=40 01:14:04 Set A/D channel type result=40 01:14:04 Set A/D encoding result=40 01:14:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:04 Set channel filter=0.000000e+000 result=40 01:14:04 Config A/D Result=40 01:14:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:04 Get A/D filter: -9.255963e+061 result=40 01:14:04 Get A/D value=-858993460 result=40 01:14:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:04 Parameters OK 01:14:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:04 Set A/D data flow result=40 01:14:04 Set A/D channel type result=40 01:14:04 Set A/D encoding result=40 01:14:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:04 Set channel filter=0.000000e+000 result=40 01:14:04 Config A/D Result=40 01:14:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:04 Get A/D filter: -9.255963e+061 result=40 01:14:04 Get A/D value=-858993460 result=40 01:14:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:14:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:14:04 Aux= 01:14:04 Message to Camera, serial 99966 queued 01:14:12 Received message from Master: op=Shutter serial=99976 01:14:12 Shutter LASER close 01:14:13 Received message from Master: op=PointingHead serial=99980 01:14:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:14:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:14:13 Point started: ret=0 01:14:13 point_skyscan result=0 01:14:14 Check angles 01:14:14 SkyScan query 01:14:15 SkyScan query done: ret=0 az=136.035<-9069 ze=-143.16<-21544 Statuses=0009 0009 01:14:15 Msec=0 True Az=136.035 Ze=-143.16 Az status=0009 Ze status=0009 01:14:15 Check angles 01:14:15 SkyScan query 01:14:15 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.74<-20116 Statuses=0009 0009 01:14:15 Msec=750 True Az=153.9 Ze=-121.74 Az status=0009 Ze status=0009 01:14:16 Check angles 01:14:16 SkyScan query 01:14:16 SkyScan query done: ret=0 az=171.795<-11453 ze=-100.29<-18686 Statuses=0009 0009 01:14:16 Msec=1500 True Az=171.795 Ze=-100.29 Az status=0009 Ze status=0009 01:14:16 Check angles 01:14:16 SkyScan query 01:14:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.365<-17291 Statuses=0008 0009 01:14:17 Msec=2250 True Az=176.01 Ze=-79.365 Az status=0008 Ze status=0009 01:14:17 Check angles 01:14:17 SkyScan query 01:14:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.41<-15894 Statuses=0008 0009 01:14:18 Msec=3000 True Az=176.01 Ze=-58.41 Az status=0008 Ze status=0009 01:14:18 Check angles 01:14:18 SkyScan query 01:14:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:14:18 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:14:18 Message to Master queued w/err=0: serial=99980 error=0 01:14:23 Received message from Master: op=Filter serial=99981 01:14:23 Color wheel filter change from 0 to 0 01:14:23 FLIGetFilterPos err=0 currentPosition=0 01:14:23 FLIGetStepsRemaining err=0 RemainingSteps=0 01:14:23 Filter is already there-color wheel unchanged 01:14:24 Received message from Master: op=Shutter serial=99982 01:14:24 Shutter LASER close 01:14:24 Received message from Camera: op=State serial=99984 01:14:24 GetSingleValue result=40 Value=cccccccc 01:14:24 SkyScan query 01:14:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:14:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:24 Parameters OK 01:14:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:24 Set A/D data flow result=40 01:14:24 Set A/D channel type result=40 01:14:24 Set A/D encoding result=40 01:14:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:24 Set channel filter=0.000000e+000 result=40 01:14:24 Config A/D Result=40 01:14:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:24 Get A/D filter: -9.255963e+061 result=40 01:14:24 Get A/D value=-858993460 result=40 01:14:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:24 Parameters OK 01:14:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:24 Set A/D data flow result=40 01:14:24 Set A/D channel type result=40 01:14:24 Set A/D encoding result=40 01:14:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:24 Set channel filter=0.000000e+000 result=40 01:14:24 Config A/D Result=40 01:14:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:24 Get A/D filter: -9.255963e+061 result=40 01:14:24 Get A/D value=-858993460 result=40 01:14:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:14:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:14:24 Aux= 01:14:24 Message to Camera, serial 99984 queued 01:15:00 Received message from Master: op=PointingHead serial=99996 01:15:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:15:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:15:01 Point started: ret=0 01:15:01 point_skyscan result=0 01:15:01 Check angles 01:15:01 SkyScan query 01:15:02 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.375<-13425 Statuses=0009 0009 01:15:02 Msec=0 True Az=152.73 Ze=-21.375 Az status=0009 Ze status=0009 01:15:02 Check angles 01:15:02 SkyScan query 01:15:03 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.39<-12026 Statuses=0009 0009 01:15:03 Msec=750 True Az=135.195 Ze=-0.39 Az status=0009 Ze status=0009 01:15:03 Check angles 01:15:03 SkyScan query 01:15:04 SkyScan query done: ret=0 az=117.315<-7821 ze=21<-10600 Statuses=0009 0009 01:15:04 Msec=1500 True Az=117.315 Ze=21 Az status=0009 Ze status=0009 01:15:04 Check angles 01:15:04 SkyScan query 01:15:04 SkyScan query done: ret=0 az=99.9<-6660 ze=41.955<-9203 Statuses=0009 0009 01:15:04 Msec=2250 True Az=99.9 Ze=41.955 Az status=0009 Ze status=0009 01:15:04 Check angles 01:15:04 SkyScan query 01:15:05 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:15:05 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:15:05 Check angles 01:15:05 SkyScan query 01:15:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:15:06 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:15:06 Message to Master queued w/err=0: serial=99996 error=0 01:15:11 Received message from Master: op=Filter serial=99997 01:15:11 Color wheel filter change from 0 to 0 01:15:11 FLIGetFilterPos err=0 currentPosition=0 01:15:11 FLIGetStepsRemaining err=0 RemainingSteps=0 01:15:11 Filter is already there-color wheel unchanged 01:15:11 Received message from Master: op=Shutter serial=99998 01:15:11 Shutter LASER close 01:15:11 Received message from Camera: op=State serial=100000 01:15:11 GetSingleValue result=40 Value=cccccccc 01:15:11 SkyScan query 01:15:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:15:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:12 Parameters OK 01:15:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:12 Set A/D data flow result=40 01:15:12 Set A/D channel type result=40 01:15:12 Set A/D encoding result=40 01:15:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:12 Set channel filter=0.000000e+000 result=40 01:15:12 Config A/D Result=40 01:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:12 Get A/D filter: -9.255963e+061 result=40 01:15:12 Get A/D value=-858993460 result=40 01:15:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:12 Parameters OK 01:15:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:12 Set A/D data flow result=40 01:15:12 Set A/D channel type result=40 01:15:12 Set A/D encoding result=40 01:15:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:12 Set channel filter=0.000000e+000 result=40 01:15:12 Config A/D Result=40 01:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:12 Get A/D filter: -9.255963e+061 result=40 01:15:12 Get A/D value=-858993460 result=40 01:15:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:15:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:15:12 Aux= 01:15:12 Message to Camera, serial 100000 queued 01:15:27 Received message from Master: op=Identify serial=100001 01:15:47 Received message from Master: op=PointingHead serial=100015 01:15:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:15:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:15:48 Point started: ret=0 01:15:48 point_skyscan result=0 01:15:49 Check angles 01:15:49 SkyScan query 01:15:49 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 01:15:49 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 01:15:49 Check angles 01:15:49 SkyScan query 01:15:50 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 01:15:50 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 01:15:50 Check angles 01:15:50 SkyScan query 01:15:51 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 01:15:51 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 01:15:51 Check angles 01:15:51 SkyScan query 01:15:51 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 01:15:51 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 01:15:52 Check angles 01:15:52 SkyScan query 01:15:52 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:15:52 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:15:52 Check angles 01:15:52 SkyScan query 01:15:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:15:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:15:53 Message to Master queued w/err=0: serial=100015 error=0 [UTC 2018-12-13 01:15:53] 01:15:58 Received message from Master: op=Filter serial=100016 01:15:58 Color wheel filter change from 0 to 0 01:15:58 FLIGetFilterPos err=0 currentPosition=0 01:15:58 FLIGetStepsRemaining err=0 RemainingSteps=0 01:15:58 Filter is already there-color wheel unchanged 01:15:58 Received message from Master: op=Shutter serial=100017 01:15:58 Shutter LASER close 01:15:58 Received message from Camera: op=State serial=100019 01:15:58 GetSingleValue result=40 Value=cccccccc 01:15:58 SkyScan query 01:15:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:15:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:59 Parameters OK 01:15:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:59 Set A/D data flow result=40 01:15:59 Set A/D channel type result=40 01:15:59 Set A/D encoding result=40 01:15:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:59 Set channel filter=0.000000e+000 result=40 01:15:59 Config A/D Result=40 01:15:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:59 Get A/D filter: -9.255963e+061 result=40 01:15:59 Get A/D value=-858993460 result=40 01:15:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:59 Parameters OK 01:15:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:59 Set A/D data flow result=40 01:15:59 Set A/D channel type result=40 01:15:59 Set A/D encoding result=40 01:15:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:59 Set channel filter=0.000000e+000 result=40 01:15:59 Config A/D Result=40 01:15:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:59 Get A/D filter: -9.255963e+061 result=40 01:15:59 Get A/D value=-858993460 result=40 01:15:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:15:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:15:59 Aux= 01:15:59 Message to Camera, serial 100019 queued 01:16:36 Received message from Master: op=PointingHead serial=100032 01:16:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:16:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:16:36 Point started: ret=0 01:16:36 point_skyscan result=0 01:16:37 Check angles 01:16:37 SkyScan query 01:16:37 SkyScan query done: ret=0 az=153.225<-10215 ze=8.925<-11405 Statuses=0009 0009 01:16:37 Msec=0 True Az=153.225 Ze=8.925 Az status=0009 Ze status=0009 01:16:37 Check angles 01:16:37 SkyScan query 01:16:38 SkyScan query done: ret=0 az=135.795<-9053 ze=-12.03<-12802 Statuses=0009 0009 01:16:38 Msec=750 True Az=135.795 Ze=-12.03 Az status=0009 Ze status=0009 01:16:38 Check angles 01:16:38 SkyScan query 01:16:39 SkyScan query done: ret=0 az=118.05<-7870 ze=-33.675<-14245 Statuses=0009 0009 01:16:39 Msec=1500 True Az=118.05 Ze=-33.675 Az status=0009 Ze status=0009 01:16:39 Check angles 01:16:39 SkyScan query 01:16:39 SkyScan query done: ret=0 az=100.74<-6716 ze=-51.54<-15436 Statuses=0009 0009 01:16:39 Msec=2250 True Az=100.74 Ze=-51.54 Az status=0009 Ze status=0009 01:16:40 Check angles 01:16:40 SkyScan query 01:16:40 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 01:16:40 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 01:16:40 Check angles 01:16:40 SkyScan query 01:16:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:16:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:16:41 Message to Master queued w/err=0: serial=100032 error=0 01:16:46 Received message from Master: op=Filter serial=100033 01:16:46 Color wheel filter change from 0 to 0 01:16:46 FLIGetFilterPos err=0 currentPosition=0 01:16:46 FLIGetStepsRemaining err=0 RemainingSteps=0 01:16:46 Filter is already there-color wheel unchanged 01:16:46 Received message from Master: op=Shutter serial=100034 01:16:46 Shutter LASER close 01:16:46 Received message from Camera: op=State serial=100036 01:16:46 GetSingleValue result=40 Value=cccccccc 01:16:46 SkyScan query 01:16:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:16:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:47 Parameters OK 01:16:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:47 Set A/D data flow result=40 01:16:47 Set A/D channel type result=40 01:16:47 Set A/D encoding result=40 01:16:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:47 Set channel filter=0.000000e+000 result=40 01:16:47 Config A/D Result=40 01:16:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:47 Get A/D filter: -9.255963e+061 result=40 01:16:47 Get A/D value=-858993460 result=40 01:16:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:47 Parameters OK 01:16:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:47 Set A/D data flow result=40 01:16:47 Set A/D channel type result=40 01:16:47 Set A/D encoding result=40 01:16:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:47 Set channel filter=0.000000e+000 result=40 01:16:47 Config A/D Result=40 01:16:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:47 Get A/D filter: -9.255963e+061 result=40 01:16:47 Get A/D value=-858993460 result=40 01:16:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:16:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:16:47 Aux= 01:16:47 Message to Camera, serial 100036 queued 01:17:24 Received message from Master: op=PointingHead serial=100049 01:17:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:17:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:17:24 Point started: ret=0 01:17:24 point_skyscan result=0 01:17:25 Check angles 01:17:25 SkyScan query 01:17:25 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.615<-17441 Statuses=0009 0009 01:17:25 Msec=0 True Az=109.395 Ze=-81.615 Az status=0009 Ze status=0009 01:17:25 Check angles 01:17:25 SkyScan query 01:17:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.005<-18867 Statuses=0008 0009 01:17:26 Msec=750 True Az=112.995 Ze=-103.005 Az status=0008 Ze status=0009 01:17:26 Check angles 01:17:26 SkyScan query 01:17:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.96<-20264 Statuses=0008 0009 01:17:27 Msec=1500 True Az=112.995 Ze=-123.96 Az status=0008 Ze status=0009 01:17:27 Check angles 01:17:27 SkyScan query 01:17:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.9<-21660 Statuses=0008 0009 01:17:28 Msec=2250 True Az=112.995 Ze=-144.9 Az status=0008 Ze status=0009 01:17:28 Check angles 01:17:28 SkyScan query 01:17:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.29<-23086 Statuses=0008 0009 01:17:28 Msec=3000 True Az=112.995 Ze=-166.29 Az status=0008 Ze status=0009 01:17:29 Check angles 01:17:29 SkyScan query 01:17:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:17:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:17:29 Message to Master queued w/err=0: serial=100049 error=0 01:17:34 Received message from Master: op=Filter serial=100050 01:17:34 Color wheel filter change from 0 to 0 01:17:34 FLIGetFilterPos err=0 currentPosition=0 01:17:34 FLIGetStepsRemaining err=0 RemainingSteps=0 01:17:34 Filter is already there-color wheel unchanged 01:17:34 Received message from Master: op=Shutter serial=100051 01:17:34 Shutter LASER open 01:17:34 Received message from Camera: op=State serial=100053 01:17:34 GetSingleValue result=40 Value=cccccccc 01:17:34 SkyScan query 01:17:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:17:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:35 Parameters OK 01:17:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:35 Set A/D data flow result=40 01:17:35 Set A/D channel type result=40 01:17:35 Set A/D encoding result=40 01:17:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:35 Set channel filter=0.000000e+000 result=40 01:17:35 Config A/D Result=40 01:17:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:35 Get A/D filter: -9.255963e+061 result=40 01:17:35 Get A/D value=-858993460 result=40 01:17:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:35 Parameters OK 01:17:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:35 Set A/D data flow result=40 01:17:35 Set A/D channel type result=40 01:17:35 Set A/D encoding result=40 01:17:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:35 Set channel filter=0.000000e+000 result=40 01:17:35 Config A/D Result=40 01:17:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:35 Get A/D filter: -9.255963e+061 result=40 01:17:35 Get A/D value=-858993460 result=40 01:17:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:17:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:17:35 Aux= 01:17:35 Message to Camera, serial 100053 queued 01:17:43 Received message from Master: op=Shutter serial=100063 01:17:43 Shutter LASER close 01:17:44 Received message from Master: op=PointingHead serial=100067 01:17:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:17:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:17:44 Point started: ret=0 01:17:44 point_skyscan result=0 01:17:45 Check angles 01:17:45 SkyScan query 01:17:46 SkyScan query done: ret=0 az=90.03<-6002 ze=157.335<-1511 Statuses=0009 0009 01:17:46 Msec=0 True Az=90.03 Ze=157.335 Az status=0009 Ze status=0009 01:17:46 Check angles 01:17:46 SkyScan query 01:17:46 SkyScan query done: ret=0 az=72.645<-4843 ze=136.35<-2910 Statuses=0009 0009 01:17:46 Msec=750 True Az=72.645 Ze=136.35 Az status=0009 Ze status=0009 01:17:46 Check angles 01:17:46 SkyScan query 01:17:47 SkyScan query done: ret=0 az=55.11<-3674 ze=115.44<-4304 Statuses=0009 0009 01:17:47 Msec=1500 True Az=55.11 Ze=115.44 Az status=0009 Ze status=0009 01:17:47 Check angles 01:17:47 SkyScan query 01:17:48 SkyScan query done: ret=0 az=40.845<-2723 ze=94.425<-5705 Statuses=0009 0009 01:17:48 Msec=2250 True Az=40.845 Ze=94.425 Az status=0009 Ze status=0009 01:17:48 Check angles 01:17:48 SkyScan query 01:17:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.515<-7099 Statuses=0008 0009 01:17:49 Msec=3000 True Az=40.995 Ze=73.515 Az status=0008 Ze status=0009 01:17:49 Check angles 01:17:49 SkyScan query 01:17:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 01:17:49 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 01:17:49 Check angles 01:17:49 SkyScan query 01:17:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:17:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:17:50 Message to Master queued w/err=0: serial=100067 error=0 01:17:55 Received message from Master: op=Filter serial=100068 01:17:55 Color wheel filter change from 0 to 0 01:17:55 FLIGetFilterPos err=0 currentPosition=0 01:17:55 FLIGetStepsRemaining err=0 RemainingSteps=0 01:17:55 Filter is already there-color wheel unchanged 01:17:55 Received message from Master: op=Shutter serial=100069 01:17:55 Shutter LASER close 01:17:55 Received message from Camera: op=State serial=100071 01:17:55 GetSingleValue result=40 Value=cccccccc 01:17:55 SkyScan query 01:17:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:17:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:56 Parameters OK 01:17:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:56 Set A/D data flow result=40 01:17:56 Set A/D channel type result=40 01:17:56 Set A/D encoding result=40 01:17:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:56 Set channel filter=0.000000e+000 result=40 01:17:56 Config A/D Result=40 01:17:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:56 Get A/D filter: -9.255963e+061 result=40 01:17:56 Get A/D value=-858993460 result=40 01:17:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:56 Parameters OK 01:17:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:56 Set A/D data flow result=40 01:17:56 Set A/D channel type result=40 01:17:56 Set A/D encoding result=40 01:17:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:56 Set channel filter=0.000000e+000 result=40 01:17:56 Config A/D Result=40 01:17:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:56 Get A/D filter: -9.255963e+061 result=40 01:17:56 Get A/D value=-858993460 result=40 01:17:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:17:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:17:56 Aux= 01:17:56 Message to Camera, serial 100071 queued 01:18:33 Received message from Master: op=PointingHead serial=100084 01:18:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:18:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:18:33 Point started: ret=0 01:18:33 point_skyscan result=0 01:18:34 Check angles 01:18:34 SkyScan query 01:18:35 SkyScan query done: ret=0 az=40.995<-2733 ze=21.78<-10548 Statuses=0008 0009 01:18:35 Msec=0 True Az=40.995 Ze=21.78 Az status=0008 Ze status=0009 01:18:35 Check angles 01:18:35 SkyScan query 01:18:35 SkyScan query done: ret=0 az=40.995<-2733 ze=0.81<-11946 Statuses=0008 0009 01:18:35 Msec=750 True Az=40.995 Ze=0.81 Az status=0008 Ze status=0009 01:18:36 Check angles 01:18:36 SkyScan query 01:18:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.145<-13343 Statuses=0008 0009 01:18:36 Msec=1500 True Az=40.995 Ze=-20.145 Az status=0008 Ze status=0009 01:18:36 Check angles 01:18:36 SkyScan query 01:18:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 01:18:37 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 01:18:37 Check angles 01:18:37 SkyScan query 01:18:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:18:38 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:18:38 Message to Master queued w/err=0: serial=100084 error=0 01:18:43 Received message from Master: op=Filter serial=100085 01:18:43 Color wheel filter change from 0 to 0 01:18:43 FLIGetFilterPos err=0 currentPosition=0 01:18:43 FLIGetStepsRemaining err=0 RemainingSteps=0 01:18:43 Filter is already there-color wheel unchanged 01:18:43 Received message from Master: op=Shutter serial=100086 01:18:43 Shutter LASER close 01:18:43 Received message from Camera: op=State serial=100088 01:18:43 GetSingleValue result=40 Value=cccccccc 01:18:43 SkyScan query 01:18:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:18:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:43 Parameters OK 01:18:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:43 Set A/D data flow result=40 01:18:43 Set A/D channel type result=40 01:18:43 Set A/D encoding result=40 01:18:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:43 Set channel filter=0.000000e+000 result=40 01:18:43 Config A/D Result=40 01:18:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:43 Get A/D filter: -9.255963e+061 result=40 01:18:43 Get A/D value=-858993460 result=40 01:18:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:43 Parameters OK 01:18:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:43 Set A/D data flow result=40 01:18:43 Set A/D channel type result=40 01:18:43 Set A/D encoding result=40 01:18:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:43 Set channel filter=0.000000e+000 result=40 01:18:43 Config A/D Result=40 01:18:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:43 Get A/D filter: -9.255963e+061 result=40 01:18:43 Get A/D value=-858993460 result=40 01:18:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:18:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:18:43 Aux= 01:18:43 Message to Camera, serial 100088 queued 01:19:20 Received message from Master: op=PointingHead serial=100101 01:19:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:19:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:19:21 Point started: ret=0 01:19:21 point_skyscan result=0 01:19:21 Check angles 01:19:21 SkyScan query 01:19:22 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.46<-16564 Statuses=0009 0009 01:19:22 Msec=0 True Az=63.99 Ze=-68.46 Az status=0009 Ze status=0009 01:19:22 Check angles 01:19:22 SkyScan query 01:19:23 SkyScan query done: ret=0 az=82.05<-5470 ze=-89.895<-17993 Statuses=0009 0009 01:19:23 Msec=750 True Az=82.05 Ze=-89.895 Az status=0009 Ze status=0009 01:19:23 Check angles 01:19:23 SkyScan query 01:19:23 SkyScan query done: ret=0 az=99.57<-6638 ze=-110.85<-19390 Statuses=0009 0009 01:19:23 Msec=1500 True Az=99.57 Ze=-110.85 Az status=0009 Ze status=0009 01:19:24 Check angles 01:19:24 SkyScan query 01:19:24 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.79<-20786 Statuses=0009 0009 01:19:24 Msec=2250 True Az=117.015 Ze=-131.79 Az status=0009 Ze status=0009 01:19:24 Check angles 01:19:24 SkyScan query 01:19:25 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 01:19:25 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 01:19:25 Check angles 01:19:25 SkyScan query 01:19:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:19:26 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:19:26 Message to Master queued w/err=0: serial=100101 error=0 01:19:31 Received message from Master: op=Filter serial=100102 01:19:31 Color wheel filter change from 0 to 0 01:19:31 FLIGetFilterPos err=0 currentPosition=0 01:19:31 FLIGetStepsRemaining err=0 RemainingSteps=0 01:19:31 Filter is already there-color wheel unchanged 01:19:31 Received message from Master: op=Shutter serial=100103 01:19:31 Shutter LASER close 01:19:31 Received message from Camera: op=State serial=100105 01:19:31 GetSingleValue result=40 Value=cccccccc 01:19:31 SkyScan query 01:19:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:19:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:32 Parameters OK 01:19:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:32 Set A/D data flow result=40 01:19:32 Set A/D channel type result=40 01:19:32 Set A/D encoding result=40 01:19:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:32 Set channel filter=0.000000e+000 result=40 01:19:32 Config A/D Result=40 01:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:32 Get A/D filter: -9.255963e+061 result=40 01:19:32 Get A/D value=-858993460 result=40 01:19:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:32 Parameters OK 01:19:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:32 Set A/D data flow result=40 01:19:32 Set A/D channel type result=40 01:19:32 Set A/D encoding result=40 01:19:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:32 Set channel filter=0.000000e+000 result=40 01:19:32 Config A/D Result=40 01:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:32 Get A/D filter: -9.255963e+061 result=40 01:19:32 Get A/D value=-858993460 result=40 01:19:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:32 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:19:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:19:32 Aux= 01:19:32 Message to Camera, serial 100105 queued 01:20:08 Received message from Master: op=PointingHead serial=100118 01:20:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:20:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:20:09 Point started: ret=0 01:20:09 point_skyscan result=0 01:20:09 Check angles 01:20:09 SkyScan query 01:20:10 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 01:20:10 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 01:20:10 Check angles 01:20:10 SkyScan query 01:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:20:11 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:20:11 Message to Master queued w/err=0: serial=100118 error=0 01:20:16 Received message from Master: op=Filter serial=100119 01:20:16 Color wheel filter change from 0 to 0 01:20:16 FLIGetFilterPos err=0 currentPosition=0 01:20:16 FLIGetStepsRemaining err=0 RemainingSteps=0 01:20:16 Filter is already there-color wheel unchanged 01:20:16 Received message from Master: op=Shutter serial=100120 01:20:16 Shutter LASER open 01:20:16 Received message from Camera: op=State serial=100122 01:20:16 GetSingleValue result=40 Value=cccccccc 01:20:16 SkyScan query 01:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:20:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:17 Parameters OK 01:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:17 Set A/D data flow result=40 01:20:17 Set A/D channel type result=40 01:20:17 Set A/D encoding result=40 01:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:17 Set channel filter=0.000000e+000 result=40 01:20:17 Config A/D Result=40 01:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:17 Get A/D filter: -9.255963e+061 result=40 01:20:17 Get A/D value=-858993460 result=40 01:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:17 Parameters OK 01:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:17 Set A/D data flow result=40 01:20:17 Set A/D channel type result=40 01:20:17 Set A/D encoding result=40 01:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:17 Set channel filter=0.000000e+000 result=40 01:20:17 Config A/D Result=40 01:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:17 Get A/D filter: -9.255963e+061 result=40 01:20:17 Get A/D value=-858993460 result=40 01:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:20:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:20:17 Aux= 01:20:17 Message to Camera, serial 100122 queued 01:20:25 Received message from Master: op=Shutter serial=100132 01:20:25 Shutter LASER close 01:20:26 Received message from Master: op=PointingHead serial=100136 01:20:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:20:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:20:26 Point started: ret=0 01:20:26 point_skyscan result=0 01:20:27 Check angles 01:20:27 SkyScan query 01:20:27 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.995<-21533 Statuses=0009 0009 01:20:27 Msec=0 True Az=136.17 Ze=-142.995 Az status=0009 Ze status=0009 01:20:28 Check angles 01:20:28 SkyScan query 01:20:28 SkyScan query done: ret=0 az=154.035<-10269 ze=-121.62<-20108 Statuses=0009 0009 01:20:28 Msec=750 True Az=154.035 Ze=-121.62 Az status=0009 Ze status=0009 01:20:28 Check angles 01:20:28 SkyScan query 01:20:29 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.65<-18710 Statuses=0009 0009 01:20:29 Msec=1500 True Az=171.48 Ze=-100.65 Az status=0009 Ze status=0009 01:20:29 Check angles 01:20:29 SkyScan query 01:20:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 01:20:30 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 01:20:30 Check angles 01:20:30 SkyScan query 01:20:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.29<-15886 Statuses=0008 0009 01:20:31 Msec=3000 True Az=176.01 Ze=-58.29 Az status=0008 Ze status=0009 01:20:31 Check angles 01:20:31 SkyScan query 01:20:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:20:31 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:20:31 Message to Master queued w/err=0: serial=100136 error=0 01:20:36 Received message from Master: op=Filter serial=100137 01:20:36 Color wheel filter change from 0 to 0 01:20:36 FLIGetFilterPos err=0 currentPosition=0 01:20:36 FLIGetStepsRemaining err=0 RemainingSteps=0 01:20:36 Filter is already there-color wheel unchanged 01:20:36 Received message from Master: op=Shutter serial=100138 01:20:36 Shutter LASER close 01:20:37 Received message from Camera: op=State serial=100140 01:20:37 GetSingleValue result=40 Value=cccccccc 01:20:37 SkyScan query 01:20:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:20:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:37 Parameters OK 01:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:37 Set A/D data flow result=40 01:20:37 Set A/D channel type result=40 01:20:37 Set A/D encoding result=40 01:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:37 Set channel filter=0.000000e+000 result=40 01:20:37 Config A/D Result=40 01:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:37 Get A/D filter: -9.255963e+061 result=40 01:20:37 Get A/D value=-858993460 result=40 01:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:37 Parameters OK 01:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:37 Set A/D data flow result=40 01:20:37 Set A/D channel type result=40 01:20:37 Set A/D encoding result=40 01:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:37 Set channel filter=0.000000e+000 result=40 01:20:37 Config A/D Result=40 01:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:37 Get A/D filter: -9.255963e+061 result=40 01:20:37 Get A/D value=-858993460 result=40 01:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:20:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:20:37 Aux= 01:20:37 Message to Camera, serial 100140 queued 01:21:14 Received message from Master: op=PointingHead serial=100153 01:21:14 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:21:14 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:21:14 Point started: ret=0 01:21:14 point_skyscan result=0 01:21:15 Check angles 01:21:15 SkyScan query 01:21:16 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.48<-13432 Statuses=0009 0009 01:21:16 Msec=0 True Az=152.76 Ze=-21.48 Az status=0009 Ze status=0009 01:21:16 Check angles 01:21:16 SkyScan query 01:21:16 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.48<-12032 Statuses=0009 0009 01:21:16 Msec=750 True Az=135.345 Ze=-0.48 Az status=0009 Ze status=0009 01:21:17 Check angles 01:21:17 SkyScan query 01:21:17 SkyScan query done: ret=0 az=117.45<-7830 ze=20.865<-10609 Statuses=0009 0009 01:21:17 Msec=1500 True Az=117.45 Ze=20.865 Az status=0009 Ze status=0009 01:21:17 Check angles 01:21:17 SkyScan query 01:21:18 SkyScan query done: ret=0 az=100.05<-6670 ze=41.865<-9209 Statuses=0009 0009 01:21:18 Msec=2250 True Az=100.05 Ze=41.865 Az status=0009 Ze status=0009 01:21:18 Check angles 01:21:18 SkyScan query 01:21:19 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 01:21:19 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 01:21:19 Check angles 01:21:19 SkyScan query 01:21:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:21:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:21:20 Message to Master queued w/err=0: serial=100153 error=0 01:21:25 Received message from Master: op=Filter serial=100154 01:21:25 Color wheel filter change from 0 to 0 01:21:25 FLIGetFilterPos err=0 currentPosition=0 01:21:25 FLIGetStepsRemaining err=0 RemainingSteps=0 01:21:25 Filter is already there-color wheel unchanged 01:21:25 Received message from Master: op=Shutter serial=100155 01:21:25 Shutter LASER close 01:21:25 Received message from Camera: op=State serial=100157 01:21:25 GetSingleValue result=40 Value=cccccccc 01:21:25 SkyScan query 01:21:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:21:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:25 Parameters OK 01:21:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:25 Set A/D data flow result=40 01:21:25 Set A/D channel type result=40 01:21:25 Set A/D encoding result=40 01:21:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:25 Set channel filter=0.000000e+000 result=40 01:21:25 Config A/D Result=40 01:21:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:25 Get A/D filter: -9.255963e+061 result=40 01:21:25 Get A/D value=-858993460 result=40 01:21:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:25 Parameters OK 01:21:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:25 Set A/D data flow result=40 01:21:25 Set A/D channel type result=40 01:21:25 Set A/D encoding result=40 01:21:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:25 Set channel filter=0.000000e+000 result=40 01:21:25 Config A/D Result=40 01:21:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:25 Get A/D filter: -9.255963e+061 result=40 01:21:25 Get A/D value=-858993460 result=40 01:21:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:21:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:21:25 Aux= 01:21:25 Message to Camera, serial 100157 queued 01:22:02 Received message from Master: op=PointingHead serial=100170 01:22:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:22:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:22:02 Point started: ret=0 01:22:02 point_skyscan result=0 01:22:03 Check angles 01:22:03 SkyScan query 01:22:04 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 01:22:04 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 01:22:04 Check angles 01:22:04 SkyScan query 01:22:05 SkyScan query done: ret=0 az=126.96<-8464 ze=38.49<-9434 Statuses=0009 0008 01:22:05 Msec=750 True Az=126.96 Ze=38.49 Az status=0009 Ze status=0008 01:22:05 Check angles 01:22:05 SkyScan query 01:22:05 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 01:22:05 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 01:22:05 Check angles 01:22:05 SkyScan query 01:22:06 SkyScan query done: ret=0 az=161.91<-10794 ze=38.505<-9433 Statuses=0009 0008 01:22:06 Msec=2250 True Az=161.91 Ze=38.505 Az status=0009 Ze status=0008 01:22:06 Check angles 01:22:06 SkyScan query 01:22:07 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:22:07 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:22:07 Check angles 01:22:07 SkyScan query 01:22:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:22:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:22:08 Message to Master queued w/err=0: serial=100170 error=0 01:22:13 Received message from Master: op=Filter serial=100171 01:22:13 Color wheel filter change from 0 to 0 01:22:13 FLIGetFilterPos err=0 currentPosition=0 01:22:13 FLIGetStepsRemaining err=0 RemainingSteps=0 01:22:13 Filter is already there-color wheel unchanged 01:22:13 Received message from Master: op=Shutter serial=100172 01:22:13 Shutter LASER close 01:22:13 Received message from Camera: op=State serial=100174 01:22:13 GetSingleValue result=40 Value=cccccccc 01:22:13 SkyScan query 01:22:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:22:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:13 Parameters OK 01:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:13 Set A/D data flow result=40 01:22:13 Set A/D channel type result=40 01:22:13 Set A/D encoding result=40 01:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:13 Set channel filter=0.000000e+000 result=40 01:22:13 Config A/D Result=40 01:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:13 Get A/D filter: -9.255963e+061 result=40 01:22:13 Get A/D value=-858993460 result=40 01:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:13 Parameters OK 01:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:13 Set A/D data flow result=40 01:22:13 Set A/D channel type result=40 01:22:13 Set A/D encoding result=40 01:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:13 Set channel filter=0.000000e+000 result=40 01:22:13 Config A/D Result=40 01:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:13 Get A/D filter: -9.255963e+061 result=40 01:22:13 Get A/D value=-858993460 result=40 01:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:22:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:22:13 Aux= 01:22:13 Message to Camera, serial 100174 queued 01:22:50 Received message from Master: op=PointingHead serial=100187 01:22:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:22:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:22:51 Point started: ret=0 01:22:51 point_skyscan result=0 01:22:51 Check angles 01:22:51 SkyScan query 01:22:52 SkyScan query done: ret=0 az=152.79<-10186 ze=8.46<-11436 Statuses=0009 0009 01:22:52 Msec=0 True Az=152.79 Ze=8.46 Az status=0009 Ze status=0009 01:22:52 Check angles 01:22:52 SkyScan query 01:22:53 SkyScan query done: ret=0 az=134.985<-8999 ze=-12.93<-12862 Statuses=0009 0009 01:22:53 Msec=750 True Az=134.985 Ze=-12.93 Az status=0009 Ze status=0009 01:22:53 Check angles 01:22:53 SkyScan query 01:22:53 SkyScan query done: ret=0 az=117.42<-7828 ze=-33.885<-14259 Statuses=0009 0009 01:22:53 Msec=1500 True Az=117.42 Ze=-33.885 Az status=0009 Ze status=0009 01:22:54 Check angles 01:22:54 SkyScan query 01:22:54 SkyScan query done: ret=0 az=100.11<-6674 ze=-51.555<-15437 Statuses=0009 0009 01:22:54 Msec=2250 True Az=100.11 Ze=-51.555 Az status=0009 Ze status=0009 01:22:54 Check angles 01:22:54 SkyScan query 01:22:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 01:22:55 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 01:22:55 Check angles 01:22:55 SkyScan query 01:22:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:22:56 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:22:56 Message to Master queued w/err=0: serial=100187 error=0 01:23:01 Received message from Master: op=Filter serial=100188 01:23:01 Color wheel filter change from 0 to 0 01:23:01 FLIGetFilterPos err=0 currentPosition=0 01:23:01 FLIGetStepsRemaining err=0 RemainingSteps=0 01:23:01 Filter is already there-color wheel unchanged 01:23:01 Received message from Master: op=Shutter serial=100189 01:23:01 Shutter LASER close 01:23:01 Received message from Camera: op=State serial=100191 01:23:01 GetSingleValue result=40 Value=cccccccc 01:23:01 SkyScan query 01:23:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:23:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:01 Parameters OK 01:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:01 Set A/D data flow result=40 01:23:01 Set A/D channel type result=40 01:23:01 Set A/D encoding result=40 01:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:01 Set channel filter=0.000000e+000 result=40 01:23:01 Config A/D Result=40 01:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:01 Get A/D filter: -9.255963e+061 result=40 01:23:01 Get A/D value=-858993460 result=40 01:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:01 Parameters OK 01:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:01 Set A/D data flow result=40 01:23:01 Set A/D channel type result=40 01:23:01 Set A/D encoding result=40 01:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:01 Set channel filter=0.000000e+000 result=40 01:23:01 Config A/D Result=40 01:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:01 Get A/D filter: -9.255963e+061 result=40 01:23:01 Get A/D value=-858993460 result=40 01:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:23:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:23:01 Aux= 01:23:01 Message to Camera, serial 100191 queued 01:23:38 Received message from Master: op=PointingHead serial=100204 01:23:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:23:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:23:39 Point started: ret=0 01:23:39 point_skyscan result=0 01:23:39 Check angles 01:23:39 SkyScan query 01:23:40 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.645<-17443 Statuses=0009 0009 01:23:40 Msec=0 True Az=109.185 Ze=-81.645 Az status=0009 Ze status=0009 01:23:40 Check angles 01:23:40 SkyScan query 01:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.585<-18839 Statuses=0008 0009 01:23:41 Msec=750 True Az=112.995 Ze=-102.585 Az status=0008 Ze status=0009 01:23:41 Check angles 01:23:41 SkyScan query 01:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 01:23:41 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 01:23:42 Check angles 01:23:42 SkyScan query 01:23:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 01:23:42 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 01:23:42 Check angles 01:23:42 SkyScan query 01:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.435<-23029 Statuses=0008 0009 01:23:43 Msec=3000 True Az=112.995 Ze=-165.435 Az status=0008 Ze status=0009 01:23:43 Check angles 01:23:43 SkyScan query 01:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:23:44 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:23:44 Message to Master queued w/err=0: serial=100204 error=0 01:23:49 Received message from Master: op=Filter serial=100205 01:23:49 Color wheel filter change from 0 to 0 01:23:49 FLIGetFilterPos err=0 currentPosition=0 01:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 01:23:49 Filter is already there-color wheel unchanged 01:23:49 Received message from Master: op=Shutter serial=100206 01:23:49 Shutter LASER open 01:23:49 Received message from Camera: op=State serial=100208 01:23:49 GetSingleValue result=40 Value=cccccccc 01:23:49 SkyScan query 01:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:50 Parameters OK 01:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:50 Set A/D data flow result=40 01:23:50 Set A/D channel type result=40 01:23:50 Set A/D encoding result=40 01:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:50 Set channel filter=0.000000e+000 result=40 01:23:50 Config A/D Result=40 01:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:50 Get A/D filter: -9.255963e+061 result=40 01:23:50 Get A/D value=-858993460 result=40 01:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:50 Parameters OK 01:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:50 Set A/D data flow result=40 01:23:50 Set A/D channel type result=40 01:23:50 Set A/D encoding result=40 01:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:50 Set channel filter=0.000000e+000 result=40 01:23:50 Config A/D Result=40 01:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:50 Get A/D filter: -9.255963e+061 result=40 01:23:50 Get A/D value=-858993460 result=40 01:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:23:50 Aux= 01:23:50 Message to Camera, serial 100208 queued 01:23:58 Received message from Master: op=Shutter serial=100218 01:23:58 Shutter LASER close 01:23:58 Received message from Master: op=PointingHead serial=100222 01:23:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:23:58 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:23:59 Point started: ret=0 01:23:59 point_skyscan result=0 01:24:00 Check angles 01:24:00 SkyScan query 01:24:00 SkyScan query done: ret=0 az=89.895<-5993 ze=157.17<-1522 Statuses=0009 0009 01:24:00 Msec=0 True Az=89.895 Ze=157.17 Az status=0009 Ze status=0009 01:24:00 Check angles 01:24:00 SkyScan query 01:24:01 SkyScan query done: ret=0 az=72.345<-4823 ze=136.215<-2919 Statuses=0009 0009 01:24:01 Msec=750 True Az=72.345 Ze=136.215 Az status=0009 Ze status=0009 01:24:01 Check angles 01:24:01 SkyScan query 01:24:02 SkyScan query done: ret=0 az=54.975<-3665 ze=115.29<-4314 Statuses=0009 0009 01:24:02 Msec=1500 True Az=54.975 Ze=115.29 Az status=0009 Ze status=0009 01:24:02 Check angles 01:24:02 SkyScan query 01:24:02 SkyScan query done: ret=0 az=40.845<-2723 ze=94.29<-5714 Statuses=0009 0009 01:24:02 Msec=2250 True Az=40.845 Ze=94.29 Az status=0009 Ze status=0009 01:24:03 Check angles 01:24:03 SkyScan query 01:24:03 SkyScan query done: ret=0 az=40.995<-2733 ze=73.335<-7111 Statuses=0008 0009 01:24:03 Msec=3000 True Az=40.995 Ze=73.335 Az status=0008 Ze status=0009 01:24:03 Check angles 01:24:03 SkyScan query 01:24:04 SkyScan query done: ret=0 az=40.995<-2733 ze=52.785<-8481 Statuses=0008 0009 01:24:04 Msec=3750 True Az=40.995 Ze=52.785 Az status=0008 Ze status=0009 01:24:04 Check angles 01:24:04 SkyScan query 01:24:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:24:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:24:05 Message to Master queued w/err=0: serial=100222 error=0 01:24:10 Received message from Master: op=Filter serial=100223 01:24:10 Color wheel filter change from 0 to 0 01:24:10 FLIGetFilterPos err=0 currentPosition=0 01:24:10 FLIGetStepsRemaining err=0 RemainingSteps=0 01:24:10 Filter is already there-color wheel unchanged 01:24:10 Received message from Master: op=Shutter serial=100224 01:24:10 Shutter LASER close 01:24:10 Received message from Camera: op=State serial=100226 01:24:10 GetSingleValue result=40 Value=cccccccc 01:24:10 SkyScan query 01:24:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:24:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:11 Parameters OK 01:24:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:11 Set A/D data flow result=40 01:24:11 Set A/D channel type result=40 01:24:11 Set A/D encoding result=40 01:24:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:11 Set channel filter=0.000000e+000 result=40 01:24:11 Config A/D Result=40 01:24:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:11 Get A/D filter: -9.255963e+061 result=40 01:24:11 Get A/D value=-858993460 result=40 01:24:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:11 Parameters OK 01:24:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:11 Set A/D data flow result=40 01:24:11 Set A/D channel type result=40 01:24:11 Set A/D encoding result=40 01:24:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:11 Set channel filter=0.000000e+000 result=40 01:24:11 Config A/D Result=40 01:24:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:11 Get A/D filter: -9.255963e+061 result=40 01:24:11 Get A/D value=-858993460 result=40 01:24:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:24:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:24:11 Aux= 01:24:11 Message to Camera, serial 100226 queued 01:24:48 Received message from Master: op=PointingHead serial=100239 01:24:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:24:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:24:48 Point started: ret=0 01:24:48 point_skyscan result=0 01:24:49 Check angles 01:24:49 SkyScan query 01:24:49 SkyScan query done: ret=0 az=40.995<-2733 ze=21.855<-10543 Statuses=0008 0009 01:24:49 Msec=0 True Az=40.995 Ze=21.855 Az status=0008 Ze status=0009 01:24:49 Check angles 01:24:49 SkyScan query 01:24:50 SkyScan query done: ret=0 az=40.995<-2733 ze=0.915<-11939 Statuses=0008 0009 01:24:50 Msec=750 True Az=40.995 Ze=0.915 Az status=0008 Ze status=0009 01:24:50 Check angles 01:24:50 SkyScan query 01:24:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.055<-13337 Statuses=0008 0009 01:24:51 Msec=1500 True Az=40.995 Ze=-20.055 Az status=0008 Ze status=0009 01:24:51 Check angles 01:24:51 SkyScan query 01:24:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.52<-14568 Statuses=0008 0009 01:24:52 Msec=2250 True Az=40.995 Ze=-38.52 Az status=0008 Ze status=0009 01:24:52 Check angles 01:24:52 SkyScan query 01:24:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:24:52 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:24:52 Message to Master queued w/err=0: serial=100239 error=0 01:24:57 Received message from Master: op=Filter serial=100240 01:24:57 Color wheel filter change from 0 to 0 01:24:57 FLIGetFilterPos err=0 currentPosition=0 01:24:57 FLIGetStepsRemaining err=0 RemainingSteps=0 01:24:57 Filter is already there-color wheel unchanged 01:24:57 Received message from Master: op=Shutter serial=100241 01:24:57 Shutter LASER close 01:24:57 Received message from Camera: op=State serial=100243 01:24:57 GetSingleValue result=40 Value=cccccccc 01:24:57 SkyScan query 01:24:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:24:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:58 Parameters OK 01:24:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:58 Set A/D data flow result=40 01:24:58 Set A/D channel type result=40 01:24:58 Set A/D encoding result=40 01:24:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:58 Set channel filter=0.000000e+000 result=40 01:24:58 Config A/D Result=40 01:24:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:58 Get A/D filter: -9.255963e+061 result=40 01:24:58 Get A/D value=-858993460 result=40 01:24:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:58 Parameters OK 01:24:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:58 Set A/D data flow result=40 01:24:58 Set A/D channel type result=40 01:24:58 Set A/D encoding result=40 01:24:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:58 Set channel filter=0.000000e+000 result=40 01:24:58 Config A/D Result=40 01:24:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:58 Get A/D filter: -9.255963e+061 result=40 01:24:58 Get A/D value=-858993460 result=40 01:24:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:24:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:24:58 Aux= 01:24:58 Message to Camera, serial 100243 queued 01:25:35 Received message from Master: op=PointingHead serial=100256 01:25:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:25:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:25:35 Point started: ret=0 01:25:35 point_skyscan result=0 01:25:36 Check angles 01:25:36 SkyScan query 01:25:37 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.325<-16555 Statuses=0009 0009 01:25:37 Msec=0 True Az=63.975 Ze=-68.325 Az status=0009 Ze status=0009 01:25:37 Check angles 01:25:37 SkyScan query 01:25:37 SkyScan query done: ret=0 az=81.915<-5461 ze=-89.73<-17982 Statuses=0009 0009 01:25:37 Msec=750 True Az=81.915 Ze=-89.73 Az status=0009 Ze status=0009 01:25:38 Check angles 01:25:38 SkyScan query 01:25:38 SkyScan query done: ret=0 az=99.765<-6651 ze=-111.12<-19408 Statuses=0009 0009 01:25:38 Msec=1500 True Az=99.765 Ze=-111.12 Az status=0009 Ze status=0009 01:25:38 Check angles 01:25:38 SkyScan query 01:25:39 SkyScan query done: ret=0 az=117.6<-7840 ze=-132.495<-20833 Statuses=0009 0009 01:25:39 Msec=2250 True Az=117.6 Ze=-132.495 Az status=0009 Ze status=0009 01:25:39 Check angles 01:25:39 SkyScan query 01:25:40 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 01:25:40 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 01:25:40 Check angles 01:25:40 SkyScan query 01:25:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:25:40 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:25:40 Message to Master queued w/err=0: serial=100256 error=0 01:25:45 Received message from Master: op=Filter serial=100257 01:25:45 Color wheel filter change from 0 to 0 01:25:45 FLIGetFilterPos err=0 currentPosition=0 01:25:45 FLIGetStepsRemaining err=0 RemainingSteps=0 01:25:45 Filter is already there-color wheel unchanged 01:25:46 Received message from Master: op=Shutter serial=100258 01:25:46 Shutter LASER close 01:25:46 Received message from Camera: op=State serial=100260 01:25:46 GetSingleValue result=40 Value=cccccccc 01:25:46 SkyScan query 01:25:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:25:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:46 Parameters OK 01:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:46 Set A/D data flow result=40 [UTC 2018-12-13 01:25:46] 01:25:46 Set A/D channel type result=40 01:25:46 Set A/D encoding result=40 01:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:46 Set channel filter=0.000000e+000 result=40 01:25:46 Config A/D Result=40 01:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:46 Get A/D filter: -9.255963e+061 result=40 01:25:46 Get A/D value=-858993460 result=40 01:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:46 Parameters OK 01:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:46 Set A/D data flow result=40 01:25:46 Set A/D channel type result=40 01:25:46 Set A/D encoding result=40 01:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:46 Set channel filter=0.000000e+000 result=40 01:25:46 Config A/D Result=40 01:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:46 Get A/D filter: -9.255963e+061 result=40 01:25:46 Get A/D value=-858993460 result=40 01:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:25:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:25:46 Aux= 01:25:46 Message to Camera, serial 100260 queued 01:26:23 Received message from Master: op=PointingHead serial=100273 01:26:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:26:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:26:23 Point started: ret=0 01:26:23 point_skyscan result=0 01:26:24 Check angles 01:26:24 SkyScan query 01:26:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 01:26:25 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 01:26:25 Check angles 01:26:25 SkyScan query 01:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:26:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:26:25 Message to Master queued w/err=0: serial=100273 error=0 01:26:30 Received message from Master: op=Filter serial=100274 01:26:30 Color wheel filter change from 0 to 0 01:26:30 FLIGetFilterPos err=0 currentPosition=0 01:26:30 FLIGetStepsRemaining err=0 RemainingSteps=0 01:26:30 Filter is already there-color wheel unchanged 01:26:31 Received message from Master: op=Shutter serial=100275 01:26:31 Shutter LASER open 01:26:31 Received message from Camera: op=State serial=100277 01:26:31 GetSingleValue result=40 Value=cccccccc 01:26:31 SkyScan query 01:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:26:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:31 Parameters OK 01:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:31 Set A/D data flow result=40 01:26:31 Set A/D channel type result=40 01:26:31 Set A/D encoding result=40 01:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:31 Set channel filter=0.000000e+000 result=40 01:26:31 Config A/D Result=40 01:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:31 Get A/D filter: -9.255963e+061 result=40 01:26:31 Get A/D value=-858993460 result=40 01:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:31 Parameters OK 01:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:31 Set A/D data flow result=40 01:26:31 Set A/D channel type result=40 01:26:31 Set A/D encoding result=40 01:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:31 Set channel filter=0.000000e+000 result=40 01:26:31 Config A/D Result=40 01:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:31 Get A/D filter: -9.255963e+061 result=40 01:26:31 Get A/D value=-858993460 result=40 01:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:26:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:26:31 Aux= 01:26:31 Message to Camera, serial 100277 queued 01:26:40 Received message from Master: op=Shutter serial=100287 01:26:40 Shutter LASER close 01:26:40 Received message from Master: op=PointingHead serial=100291 01:26:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:26:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:26:41 Point started: ret=0 01:26:41 point_skyscan result=0 01:26:42 Check angles 01:26:42 SkyScan query 01:26:42 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.085<-21539 Statuses=0009 0009 01:26:42 Msec=0 True Az=136.17 Ze=-143.085 Az status=0009 Ze status=0009 01:26:42 Check angles 01:26:42 SkyScan query 01:26:43 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.1<-20140 Statuses=0009 0009 01:26:43 Msec=750 True Az=153.555 Ze=-122.1 Az status=0009 Ze status=0009 01:26:43 Check angles 01:26:43 SkyScan query 01:26:44 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.205<-18747 Statuses=0009 0009 01:26:44 Msec=1500 True Az=171.09 Ze=-101.205 Az status=0009 Ze status=0009 01:26:44 Check angles 01:26:44 SkyScan query 01:26:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.815<-17321 Statuses=0008 0009 01:26:44 Msec=2250 True Az=176.01 Ze=-79.815 Az status=0008 Ze status=0009 01:26:45 Check angles 01:26:45 SkyScan query 01:26:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.365<-15891 Statuses=0008 0009 01:26:45 Msec=3000 True Az=176.01 Ze=-58.365 Az status=0008 Ze status=0009 01:26:45 Check angles 01:26:45 SkyScan query 01:26:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:26:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:26:46 Message to Master queued w/err=0: serial=100291 error=0 01:26:51 Received message from Master: op=Filter serial=100292 01:26:51 Color wheel filter change from 0 to 0 01:26:51 FLIGetFilterPos err=0 currentPosition=0 01:26:51 FLIGetStepsRemaining err=0 RemainingSteps=0 01:26:51 Filter is already there-color wheel unchanged 01:26:51 Received message from Master: op=Shutter serial=100293 01:26:51 Shutter LASER close 01:26:51 Received message from Camera: op=State serial=100295 01:26:51 GetSingleValue result=40 Value=cccccccc 01:26:51 SkyScan query 01:26:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:26:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:52 Parameters OK 01:26:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:52 Set A/D data flow result=40 01:26:52 Set A/D channel type result=40 01:26:52 Set A/D encoding result=40 01:26:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:52 Set channel filter=0.000000e+000 result=40 01:26:52 Config A/D Result=40 01:26:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:52 Get A/D filter: -9.255963e+061 result=40 01:26:52 Get A/D value=-858993460 result=40 01:26:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:52 Parameters OK 01:26:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:52 Set A/D data flow result=40 01:26:52 Set A/D channel type result=40 01:26:52 Set A/D encoding result=40 01:26:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:52 Set channel filter=0.000000e+000 result=40 01:26:52 Config A/D Result=40 01:26:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:52 Get A/D filter: -9.255963e+061 result=40 01:26:52 Get A/D value=-858993460 result=40 01:26:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:26:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:26:52 Aux= 01:26:52 Message to Camera, serial 100295 queued 01:27:29 Received message from Master: op=PointingHead serial=100308 01:27:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:27:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:27:29 Point started: ret=0 01:27:29 point_skyscan result=0 01:27:30 Check angles 01:27:30 SkyScan query 01:27:30 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.825<-13455 Statuses=0009 0009 01:27:30 Msec=0 True Az=152.97 Ze=-21.825 Az status=0009 Ze status=0009 01:27:30 Check angles 01:27:30 SkyScan query 01:27:31 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.84<-12056 Statuses=0009 0009 01:27:31 Msec=750 True Az=135.42 Ze=-0.84 Az status=0009 Ze status=0009 01:27:31 Check angles 01:27:31 SkyScan query 01:27:32 SkyScan query done: ret=0 az=117.96<-7864 ze=20.115<-10659 Statuses=0009 0009 01:27:32 Msec=1500 True Az=117.96 Ze=20.115 Az status=0009 Ze status=0009 01:27:32 Check angles 01:27:32 SkyScan query 01:27:33 SkyScan query done: ret=0 az=100.56<-6704 ze=41.07<-9262 Statuses=0009 0009 01:27:33 Msec=2250 True Az=100.56 Ze=41.07 Az status=0009 Ze status=0009 01:27:33 Check angles 01:27:33 SkyScan query 01:27:33 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 01:27:33 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 01:27:33 Check angles 01:27:33 SkyScan query 01:27:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:27:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:27:34 Message to Master queued w/err=0: serial=100308 error=0 01:27:39 Received message from Master: op=Filter serial=100309 01:27:39 Color wheel filter change from 0 to 0 01:27:39 FLIGetFilterPos err=0 currentPosition=0 01:27:39 FLIGetStepsRemaining err=0 RemainingSteps=0 01:27:39 Filter is already there-color wheel unchanged 01:27:39 Received message from Master: op=Shutter serial=100310 01:27:39 Shutter LASER close 01:27:39 Received message from Camera: op=State serial=100312 01:27:39 GetSingleValue result=40 Value=cccccccc 01:27:39 SkyScan query 01:27:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:27:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:40 Parameters OK 01:27:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:40 Set A/D data flow result=40 01:27:40 Set A/D channel type result=40 01:27:40 Set A/D encoding result=40 01:27:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:40 Set channel filter=0.000000e+000 result=40 01:27:40 Config A/D Result=40 01:27:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:40 Get A/D filter: -9.255963e+061 result=40 01:27:40 Get A/D value=-858993460 result=40 01:27:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:40 Parameters OK 01:27:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:40 Set A/D data flow result=40 01:27:40 Set A/D channel type result=40 01:27:40 Set A/D encoding result=40 01:27:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:40 Set channel filter=0.000000e+000 result=40 01:27:40 Config A/D Result=40 01:27:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:40 Get A/D filter: -9.255963e+061 result=40 01:27:40 Get A/D value=-858993460 result=40 01:27:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:27:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:27:40 Aux= 01:27:40 Message to Camera, serial 100312 queued 01:28:17 Received message from Master: op=PointingHead serial=100325 01:28:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:28:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:28:17 Point started: ret=0 01:28:17 point_skyscan result=0 01:28:18 Check angles 01:28:18 SkyScan query 01:28:18 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 01:28:18 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 01:28:19 Check angles 01:28:19 SkyScan query 01:28:19 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 01:28:19 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 01:28:19 Check angles 01:28:19 SkyScan query 01:28:20 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 01:28:20 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 01:28:20 Check angles 01:28:20 SkyScan query 01:28:21 SkyScan query done: ret=0 az=162.135<-10809 ze=38.505<-9433 Statuses=0009 0008 01:28:21 Msec=2250 True Az=162.135 Ze=38.505 Az status=0009 Ze status=0008 01:28:21 Check angles 01:28:21 SkyScan query 01:28:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:28:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:28:22 Check angles 01:28:22 SkyScan query 01:28:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:28:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:28:22 Message to Master queued w/err=0: serial=100325 error=0 01:28:27 Received message from Master: op=Filter serial=100326 01:28:27 Color wheel filter change from 0 to 0 01:28:27 FLIGetFilterPos err=0 currentPosition=0 01:28:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:28:27 Filter is already there-color wheel unchanged 01:28:27 Received message from Master: op=Shutter serial=100327 01:28:27 Shutter LASER close 01:28:27 Received message from Camera: op=State serial=100329 01:28:27 GetSingleValue result=40 Value=cccccccc 01:28:27 SkyScan query 01:28:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:28:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:28 Parameters OK 01:28:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:28 Set A/D data flow result=40 01:28:28 Set A/D channel type result=40 01:28:28 Set A/D encoding result=40 01:28:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:28 Set channel filter=0.000000e+000 result=40 01:28:28 Config A/D Result=40 01:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:28 Get A/D filter: -9.255963e+061 result=40 01:28:28 Get A/D value=-858993460 result=40 01:28:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:28 Parameters OK 01:28:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:28 Set A/D data flow result=40 01:28:28 Set A/D channel type result=40 01:28:28 Set A/D encoding result=40 01:28:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:28 Set channel filter=0.000000e+000 result=40 01:28:28 Config A/D Result=40 01:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:28 Get A/D filter: -9.255963e+061 result=40 01:28:28 Get A/D value=-858993460 result=40 01:28:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:28:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:28:28 Aux= 01:28:28 Message to Camera, serial 100329 queued 01:29:05 Received message from Master: op=PointingHead serial=100342 01:29:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:29:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:29:05 Point started: ret=0 01:29:05 point_skyscan result=0 01:29:06 Check angles 01:29:06 SkyScan query 01:29:06 SkyScan query done: ret=0 az=152.955<-10197 ze=8.64<-11424 Statuses=0009 0009 01:29:06 Msec=0 True Az=152.955 Ze=8.64 Az status=0009 Ze status=0009 01:29:07 Check angles 01:29:07 SkyScan query 01:29:07 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.27<-12818 Statuses=0009 0009 01:29:07 Msec=750 True Az=135.405 Ze=-12.27 Az status=0009 Ze status=0009 01:29:07 Check angles 01:29:07 SkyScan query 01:29:08 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.225<-14215 Statuses=0009 0009 01:29:08 Msec=1500 True Az=118.005 Ze=-33.225 Az status=0009 Ze status=0009 01:29:08 Check angles 01:29:08 SkyScan query 01:29:09 SkyScan query done: ret=0 az=100.605<-6707 ze=-51.525<-15435 Statuses=0009 0009 01:29:09 Msec=2250 True Az=100.605 Ze=-51.525 Az status=0009 Ze status=0009 01:29:09 Check angles 01:29:09 SkyScan query 01:29:10 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:29:10 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:29:10 Check angles 01:29:10 SkyScan query 01:29:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:29:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:29:10 Message to Master queued w/err=0: serial=100342 error=0 01:29:15 Received message from Master: op=Filter serial=100343 01:29:15 Color wheel filter change from 0 to 0 01:29:15 FLIGetFilterPos err=0 currentPosition=0 01:29:15 FLIGetStepsRemaining err=0 RemainingSteps=0 01:29:15 Filter is already there-color wheel unchanged 01:29:15 Received message from Master: op=Shutter serial=100344 01:29:15 Shutter LASER close 01:29:15 Received message from Camera: op=State serial=100346 01:29:15 GetSingleValue result=40 Value=cccccccc 01:29:15 SkyScan query 01:29:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:29:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:16 Parameters OK 01:29:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:16 Set A/D data flow result=40 01:29:16 Set A/D channel type result=40 01:29:16 Set A/D encoding result=40 01:29:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:16 Set channel filter=0.000000e+000 result=40 01:29:16 Config A/D Result=40 01:29:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:16 Get A/D filter: -9.255963e+061 result=40 01:29:16 Get A/D value=-858993460 result=40 01:29:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:16 Parameters OK 01:29:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:16 Set A/D data flow result=40 01:29:16 Set A/D channel type result=40 01:29:16 Set A/D encoding result=40 01:29:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:16 Set channel filter=0.000000e+000 result=40 01:29:16 Config A/D Result=40 01:29:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:16 Get A/D filter: -9.255963e+061 result=40 01:29:16 Get A/D value=-858993460 result=40 01:29:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:29:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:29:16 Aux= 01:29:16 Message to Camera, serial 100346 queued 01:29:53 Received message from Master: op=PointingHead serial=100359 01:29:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:29:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:29:53 Point started: ret=0 01:29:53 point_skyscan result=0 01:29:54 Check angles 01:29:54 SkyScan query 01:29:55 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.585<-17439 Statuses=0009 0009 01:29:55 Msec=0 True Az=109.35 Ze=-81.585 Az status=0009 Ze status=0009 01:29:55 Check angles 01:29:55 SkyScan query 01:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 01:29:55 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 01:29:56 Check angles 01:29:56 SkyScan query 01:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 01:29:56 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 01:29:56 Check angles 01:29:56 SkyScan query 01:29:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.32<-21688 Statuses=0008 0009 01:29:57 Msec=2250 True Az=112.995 Ze=-145.32 Az status=0008 Ze status=0009 01:29:57 Check angles 01:29:57 SkyScan query 01:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.74<-23116 Statuses=0008 0009 01:29:58 Msec=3000 True Az=112.995 Ze=-166.74 Az status=0008 Ze status=0009 01:29:58 Check angles 01:29:58 SkyScan query 01:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:29:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:29:58 Message to Master queued w/err=0: serial=100359 error=0 01:30:03 Received message from Master: op=Filter serial=100360 01:30:03 Color wheel filter change from 0 to 0 01:30:03 FLIGetFilterPos err=0 currentPosition=0 01:30:03 FLIGetStepsRemaining err=0 RemainingSteps=0 01:30:03 Filter is already there-color wheel unchanged 01:30:04 Received message from Master: op=Shutter serial=100361 01:30:04 Shutter LASER open 01:30:04 Received message from Camera: op=State serial=100363 01:30:04 GetSingleValue result=40 Value=cccccccc 01:30:04 SkyScan query 01:30:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:30:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:04 Parameters OK 01:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:04 Set A/D data flow result=40 01:30:04 Set A/D channel type result=40 01:30:04 Set A/D encoding result=40 01:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:04 Set channel filter=0.000000e+000 result=40 01:30:04 Config A/D Result=40 01:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:04 Get A/D filter: -9.255963e+061 result=40 01:30:04 Get A/D value=-858993460 result=40 01:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:04 Parameters OK 01:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:04 Set A/D data flow result=40 01:30:04 Set A/D channel type result=40 01:30:04 Set A/D encoding result=40 01:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:04 Set channel filter=0.000000e+000 result=40 01:30:04 Config A/D Result=40 01:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:04 Get A/D filter: -9.255963e+061 result=40 01:30:04 Get A/D value=-858993460 result=40 01:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:30:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:30:04 Aux= 01:30:04 Message to Camera, serial 100363 queued 01:30:13 Received message from Master: op=Shutter serial=100373 01:30:13 Shutter LASER close 01:30:13 Received message from Master: op=PointingHead serial=100377 01:30:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:30:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:30:13 Point started: ret=0 01:30:13 point_skyscan result=0 01:30:14 Check angles 01:30:14 SkyScan query 01:30:15 SkyScan query done: ret=0 az=90.045<-6003 ze=157.425<-1505 Statuses=0009 0009 01:30:15 Msec=0 True Az=90.045 Ze=157.425 Az status=0009 Ze status=0009 01:30:15 Check angles 01:30:15 SkyScan query 01:30:16 SkyScan query done: ret=0 az=72.6<-4840 ze=136.425<-2905 Statuses=0009 0009 01:30:16 Msec=750 True Az=72.6 Ze=136.425 Az status=0009 Ze status=0009 01:30:16 Check angles 01:30:16 SkyScan query 01:30:16 SkyScan query done: ret=0 az=55.095<-3673 ze=115.515<-4299 Statuses=0009 0009 01:30:16 Msec=1500 True Az=55.095 Ze=115.515 Az status=0009 Ze status=0009 01:30:17 Check angles 01:30:17 SkyScan query 01:30:17 SkyScan query done: ret=0 az=40.875<-2725 ze=94.08<-5728 Statuses=0009 0009 01:30:17 Msec=2250 True Az=40.875 Ze=94.08 Az status=0009 Ze status=0009 01:30:17 Check angles 01:30:17 SkyScan query 01:30:18 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 01:30:18 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 01:30:18 Check angles 01:30:18 SkyScan query 01:30:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 01:30:19 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 01:30:19 Check angles 01:30:19 SkyScan query 01:30:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:30:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:30:19 Message to Master queued w/err=0: serial=100377 error=0 01:30:24 Received message from Master: op=Filter serial=100378 01:30:24 Color wheel filter change from 0 to 0 01:30:24 FLIGetFilterPos err=0 currentPosition=0 01:30:24 FLIGetStepsRemaining err=0 RemainingSteps=0 01:30:24 Filter is already there-color wheel unchanged 01:30:25 Received message from Master: op=Shutter serial=100379 01:30:25 Shutter LASER close 01:30:25 Received message from Camera: op=State serial=100381 01:30:25 GetSingleValue result=40 Value=cccccccc 01:30:25 SkyScan query 01:30:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:30:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:25 Parameters OK 01:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:25 Set A/D data flow result=40 01:30:25 Set A/D channel type result=40 01:30:25 Set A/D encoding result=40 01:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:25 Set channel filter=0.000000e+000 result=40 01:30:25 Config A/D Result=40 01:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:25 Get A/D filter: -9.255963e+061 result=40 01:30:25 Get A/D value=-858993460 result=40 01:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:25 Parameters OK 01:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:25 Set A/D data flow result=40 01:30:25 Set A/D channel type result=40 01:30:25 Set A/D encoding result=40 01:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:25 Set channel filter=0.000000e+000 result=40 01:30:25 Config A/D Result=40 01:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:25 Get A/D filter: -9.255963e+061 result=40 01:30:25 Get A/D value=-858993460 result=40 01:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:30:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:30:25 Aux= 01:30:25 Message to Camera, serial 100381 queued 01:31:01 Received message from Master: op=PointingHead serial=100393 01:31:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:31:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:31:02 Point started: ret=0 01:31:02 point_skyscan result=0 01:31:02 Check angles 01:31:02 SkyScan query 01:31:03 SkyScan query done: ret=0 az=40.995<-2733 ze=21.45<-10570 Statuses=0008 0009 01:31:03 Msec=0 True Az=40.995 Ze=21.45 Az status=0008 Ze status=0009 01:31:03 Check angles 01:31:03 SkyScan query 01:31:04 SkyScan query done: ret=0 az=40.995<-2733 ze=0.48<-11968 Statuses=0008 0009 01:31:04 Msec=750 True Az=40.995 Ze=0.48 Az status=0008 Ze status=0009 01:31:04 Check angles 01:31:04 SkyScan query 01:31:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.475<-13365 Statuses=0008 0009 01:31:04 Msec=1500 True Az=40.995 Ze=-20.475 Az status=0008 Ze status=0009 01:31:05 Check angles 01:31:05 SkyScan query 01:31:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:31:05 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:31:05 Check angles 01:31:05 SkyScan query 01:31:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:31:06 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:31:06 Message to Master queued w/err=0: serial=100393 error=0 01:31:11 Received message from Master: op=Filter serial=100394 01:31:11 Color wheel filter change from 0 to 0 01:31:11 FLIGetFilterPos err=0 currentPosition=0 01:31:11 FLIGetStepsRemaining err=0 RemainingSteps=0 01:31:11 Filter is already there-color wheel unchanged 01:31:11 Received message from Master: op=Shutter serial=100395 01:31:11 Shutter LASER close 01:31:11 Received message from Camera: op=State serial=100397 01:31:11 GetSingleValue result=40 Value=cccccccc 01:31:11 SkyScan query 01:31:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:31:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:12 Parameters OK 01:31:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:12 Set A/D data flow result=40 01:31:12 Set A/D channel type result=40 01:31:12 Set A/D encoding result=40 01:31:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:12 Set channel filter=0.000000e+000 result=40 01:31:12 Config A/D Result=40 01:31:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:12 Get A/D filter: -9.255963e+061 result=40 01:31:12 Get A/D value=-858993460 result=40 01:31:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:12 Parameters OK 01:31:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:12 Set A/D data flow result=40 01:31:12 Set A/D channel type result=40 01:31:12 Set A/D encoding result=40 01:31:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:12 Set channel filter=0.000000e+000 result=40 01:31:12 Config A/D Result=40 01:31:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:12 Get A/D filter: -9.255963e+061 result=40 01:31:12 Get A/D value=-858993460 result=40 01:31:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:31:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:31:12 Aux= 01:31:12 Message to Camera, serial 100397 queued 01:31:49 Received message from Master: op=PointingHead serial=100410 01:31:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:31:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:31:49 Point started: ret=0 01:31:49 point_skyscan result=0 01:31:50 Check angles 01:31:50 SkyScan query 01:31:50 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.22<-16548 Statuses=0009 0009 01:31:50 Msec=0 True Az=63.945 Ze=-68.22 Az status=0009 Ze status=0009 01:31:50 Check angles 01:31:50 SkyScan query 01:31:51 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.205<-17947 Statuses=0009 0009 01:31:51 Msec=750 True Az=81.54 Ze=-89.205 Az status=0009 Ze status=0009 01:31:51 Check angles 01:31:51 SkyScan query 01:31:52 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.595<-19373 Statuses=0009 0009 01:31:52 Msec=1500 True Az=99.51 Ze=-110.595 Az status=0009 Ze status=0009 01:31:52 Check angles 01:31:52 SkyScan query 01:31:53 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.535<-20769 Statuses=0009 0009 01:31:53 Msec=2250 True Az=116.895 Ze=-131.535 Az status=0009 Ze status=0009 01:31:53 Check angles 01:31:53 SkyScan query 01:31:53 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 01:31:53 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 01:31:53 Check angles 01:31:53 SkyScan query 01:31:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:31:54 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:31:54 Message to Master queued w/err=0: serial=100410 error=0 01:31:59 Received message from Master: op=Filter serial=100411 01:31:59 Color wheel filter change from 0 to 0 01:31:59 FLIGetFilterPos err=0 currentPosition=0 01:31:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:31:59 Filter is already there-color wheel unchanged 01:31:59 Received message from Master: op=Shutter serial=100412 01:31:59 Shutter LASER close 01:31:59 Received message from Camera: op=State serial=100414 01:31:59 GetSingleValue result=40 Value=cccccccc 01:31:59 SkyScan query 01:32:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:32:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:00 Parameters OK 01:32:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:00 Set A/D data flow result=40 01:32:00 Set A/D channel type result=40 01:32:00 Set A/D encoding result=40 01:32:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:00 Set channel filter=0.000000e+000 result=40 01:32:00 Config A/D Result=40 01:32:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:00 Get A/D filter: -9.255963e+061 result=40 01:32:00 Get A/D value=-858993460 result=40 01:32:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:00 Parameters OK 01:32:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:00 Set A/D data flow result=40 01:32:00 Set A/D channel type result=40 01:32:00 Set A/D encoding result=40 01:32:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:00 Set channel filter=0.000000e+000 result=40 01:32:00 Config A/D Result=40 01:32:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:00 Get A/D filter: -9.255963e+061 result=40 01:32:00 Get A/D value=-858993460 result=40 01:32:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:32:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:32:00 Aux= 01:32:00 Message to Camera, serial 100414 queued 01:32:37 Received message from Master: op=PointingHead serial=100427 01:32:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:32:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:32:37 Point started: ret=0 01:32:37 point_skyscan result=0 01:32:38 Check angles 01:32:38 SkyScan query 01:32:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 01:32:38 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 01:32:39 Check angles 01:32:39 SkyScan query 01:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:32:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:32:39 Message to Master queued w/err=0: serial=100427 error=0 01:32:44 Received message from Master: op=Filter serial=100428 01:32:44 Color wheel filter change from 0 to 0 01:32:44 FLIGetFilterPos err=0 currentPosition=0 01:32:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:32:44 Filter is already there-color wheel unchanged 01:32:44 Received message from Master: op=Shutter serial=100429 01:32:44 Shutter LASER open 01:32:44 Received message from Camera: op=State serial=100431 01:32:44 GetSingleValue result=40 Value=cccccccc 01:32:44 SkyScan query 01:32:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:32:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:45 Parameters OK 01:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:45 Set A/D data flow result=40 01:32:45 Set A/D channel type result=40 01:32:45 Set A/D encoding result=40 01:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:45 Set channel filter=0.000000e+000 result=40 01:32:45 Config A/D Result=40 01:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:45 Get A/D filter: -9.255963e+061 result=40 01:32:45 Get A/D value=-858993460 result=40 01:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:45 Parameters OK 01:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:45 Set A/D data flow result=40 01:32:45 Set A/D channel type result=40 01:32:45 Set A/D encoding result=40 01:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:45 Set channel filter=0.000000e+000 result=40 01:32:45 Config A/D Result=40 01:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:45 Get A/D filter: -9.255963e+061 result=40 01:32:45 Get A/D value=-858993460 result=40 01:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:32:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:32:45 Aux= 01:32:45 Message to Camera, serial 100431 queued 01:32:53 Received message from Master: op=Shutter serial=100441 01:32:53 Shutter LASER close 01:32:54 Received message from Master: op=PointingHead serial=100445 01:32:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:32:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:32:54 Point started: ret=0 01:32:54 point_skyscan result=0 01:32:55 Check angles 01:32:55 SkyScan query 01:32:56 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.025<-21535 Statuses=0009 0009 01:32:56 Msec=0 True Az=136.17 Ze=-143.025 Az status=0009 Ze status=0009 01:32:56 Check angles 01:32:56 SkyScan query 01:32:56 SkyScan query done: ret=0 az=154.05<-10270 ze=-121.62<-20108 Statuses=0009 0009 01:32:56 Msec=750 True Az=154.05 Ze=-121.62 Az status=0009 Ze status=0009 01:32:57 Check angles 01:32:57 SkyScan query 01:32:57 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.575<-18705 Statuses=0009 0009 01:32:57 Msec=1500 True Az=171.57 Ze=-100.575 Az status=0009 Ze status=0009 01:32:57 Check angles 01:32:57 SkyScan query 01:32:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.635<-17309 Statuses=0008 0009 01:32:58 Msec=2250 True Az=176.01 Ze=-79.635 Az status=0008 Ze status=0009 01:32:58 Check angles 01:32:58 SkyScan query 01:32:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.695<-15913 Statuses=0008 0009 01:32:59 Msec=3000 True Az=176.01 Ze=-58.695 Az status=0008 Ze status=0009 01:32:59 Check angles 01:32:59 SkyScan query 01:32:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 01:32:59 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 01:32:59 Message to Master queued w/err=0: serial=100445 error=0 01:33:04 Received message from Master: op=Filter serial=100446 01:33:04 Color wheel filter change from 0 to 0 01:33:04 FLIGetFilterPos err=0 currentPosition=0 01:33:04 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:04 Filter is already there-color wheel unchanged 01:33:05 Received message from Master: op=Shutter serial=100447 01:33:05 Shutter LASER close 01:33:05 Received message from Camera: op=State serial=100449 01:33:05 GetSingleValue result=40 Value=cccccccc 01:33:05 SkyScan query 01:33:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:33:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:05 Parameters OK 01:33:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:05 Set A/D data flow result=40 01:33:05 Set A/D channel type result=40 01:33:05 Set A/D encoding result=40 01:33:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:05 Set channel filter=0.000000e+000 result=40 01:33:05 Config A/D Result=40 01:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:05 Get A/D filter: -9.255963e+061 result=40 01:33:05 Get A/D value=-858993460 result=40 01:33:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:05 Parameters OK 01:33:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:05 Set A/D data flow result=40 01:33:05 Set A/D channel type result=40 01:33:05 Set A/D encoding result=40 01:33:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:05 Set channel filter=0.000000e+000 result=40 01:33:05 Config A/D Result=40 01:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:05 Get A/D filter: -9.255963e+061 result=40 01:33:05 Get A/D value=-858993460 result=40 01:33:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:33:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:33:05 Aux= 01:33:05 Message to Camera, serial 100449 queued 01:33:41 Received message from Master: op=PointingHead serial=100461 01:33:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:33:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:33:42 Point started: ret=0 01:33:42 point_skyscan result=0 01:33:42 Check angles 01:33:42 SkyScan query 01:33:43 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.96<-13464 Statuses=0009 0009 01:33:43 Msec=0 True Az=153.165 Ze=-21.96 Az status=0009 Ze status=0009 01:33:43 Check angles 01:33:43 SkyScan query 01:33:44 SkyScan query done: ret=0 az=135.33<-9022 ze=-0.525<-12035 Statuses=0009 0009 01:33:44 Msec=750 True Az=135.33 Ze=-0.525 Az status=0009 Ze status=0009 01:33:44 Check angles 01:33:44 SkyScan query 01:33:45 SkyScan query done: ret=0 az=117.42<-7828 ze=20.85<-10610 Statuses=0009 0009 01:33:45 Msec=1500 True Az=117.42 Ze=20.85 Az status=0009 Ze status=0009 01:33:45 Check angles 01:33:45 SkyScan query 01:33:45 SkyScan query done: ret=0 az=100.035<-6669 ze=41.82<-9212 Statuses=0009 0009 01:33:45 Msec=2250 True Az=100.035 Ze=41.82 Az status=0009 Ze status=0009 01:33:45 Check angles 01:33:45 SkyScan query 01:33:46 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 01:33:46 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 01:33:46 Check angles 01:33:46 SkyScan query 01:33:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:33:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:33:47 Message to Master queued w/err=0: serial=100461 error=0 01:33:52 Received message from Master: op=Filter serial=100462 01:33:52 Color wheel filter change from 0 to 0 01:33:52 FLIGetFilterPos err=0 currentPosition=0 01:33:52 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:52 Filter is already there-color wheel unchanged 01:33:52 Received message from Master: op=Shutter serial=100463 01:33:52 Shutter LASER close 01:33:52 Received message from Camera: op=State serial=100465 01:33:52 GetSingleValue result=40 Value=cccccccc 01:33:52 SkyScan query 01:33:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:33:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:53 Parameters OK 01:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:53 Set A/D data flow result=40 01:33:53 Set A/D channel type result=40 01:33:53 Set A/D encoding result=40 01:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:53 Set channel filter=0.000000e+000 result=40 01:33:53 Config A/D Result=40 01:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:53 Get A/D filter: -9.255963e+061 result=40 01:33:53 Get A/D value=-858993460 result=40 01:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:53 Parameters OK 01:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:53 Set A/D data flow result=40 01:33:53 Set A/D channel type result=40 01:33:53 Set A/D encoding result=40 01:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:53 Set channel filter=0.000000e+000 result=40 01:33:53 Config A/D Result=40 01:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:53 Get A/D filter: -9.255963e+061 result=40 01:33:53 Get A/D value=-858993460 result=40 01:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:33:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:33:53 Aux= 01:33:53 Message to Camera, serial 100465 queued 01:34:30 Received message from Master: op=PointingHead serial=100478 01:34:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:34:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:34:30 Point started: ret=0 01:34:30 point_skyscan result=0 01:34:31 Check angles 01:34:31 SkyScan query 01:34:31 SkyScan query done: ret=0 az=85.995<-5733 ze=21.975<-10535 Statuses=0008 0009 01:34:31 Msec=0 True Az=85.995 Ze=21.975 Az status=0008 Ze status=0009 01:34:31 Check angles 01:34:31 SkyScan query 01:34:32 SkyScan query done: ret=0 az=85.995<-5733 ze=0.57<-11962 Statuses=0008 0009 01:34:32 Msec=750 True Az=85.995 Ze=0.57 Az status=0008 Ze status=0009 01:34:32 Check angles 01:34:32 SkyScan query 01:34:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.385<-13359 Statuses=0008 0009 01:34:33 Msec=1500 True Az=85.995 Ze=-20.385 Az status=0008 Ze status=0009 01:34:33 Check angles 01:34:33 SkyScan query 01:34:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.76<-14784 Statuses=0008 0009 01:34:33 Msec=2250 True Az=85.995 Ze=-41.76 Az status=0008 Ze status=0009 01:34:34 Check angles 01:34:34 SkyScan query 01:34:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 01:34:34 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 01:34:34 Message to Master queued w/err=0: serial=100478 error=0 01:34:39 Received message from Master: op=Filter serial=100479 01:34:39 Color wheel filter change from 0 to 0 01:34:39 FLIGetFilterPos err=0 currentPosition=0 01:34:39 FLIGetStepsRemaining err=0 RemainingSteps=0 01:34:39 Filter is already there-color wheel unchanged 01:34:39 Received message from Master: op=Shutter serial=100480 01:34:39 Shutter LASER close 01:34:39 Received message from Camera: op=State serial=100482 01:34:39 GetSingleValue result=40 Value=cccccccc 01:34:39 SkyScan query 01:34:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:34:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:40 Parameters OK 01:34:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:40 Set A/D data flow result=40 01:34:40 Set A/D channel type result=40 01:34:40 Set A/D encoding result=40 01:34:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:40 Set channel filter=0.000000e+000 result=40 01:34:40 Config A/D Result=40 01:34:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:40 Get A/D filter: -9.255963e+061 result=40 01:34:40 Get A/D value=-858993460 result=40 01:34:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:40 Parameters OK 01:34:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:40 Set A/D data flow result=40 01:34:40 Set A/D channel type result=40 01:34:40 Set A/D encoding result=40 01:34:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:40 Set channel filter=0.000000e+000 result=40 01:34:40 Config A/D Result=40 01:34:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:40 Get A/D filter: -9.255963e+061 result=40 01:34:40 Get A/D value=-858993460 result=40 01:34:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:34:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:34:40 Aux= 01:34:40 Message to Camera, serial 100482 queued 01:35:17 Received message from Master: op=PointingHead serial=100495 01:35:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:35:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:35:17 Point started: ret=0 01:35:17 point_skyscan result=0 01:35:18 Check angles 01:35:18 SkyScan query 01:35:19 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.105<-17407 Statuses=0009 0009 01:35:19 Msec=0 True Az=108.885 Ze=-81.105 Az status=0009 Ze status=0009 01:35:19 Check angles 01:35:19 SkyScan query 01:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 01:35:19 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 01:35:19 Check angles 01:35:19 SkyScan query 01:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 01:35:20 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 01:35:20 Check angles 01:35:20 SkyScan query 01:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 01:35:21 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 01:35:21 Check angles 01:35:21 SkyScan query 01:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 01:35:22 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 01:35:22 Check angles 01:35:22 SkyScan query 01:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:35:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:35:22 Message to Master queued w/err=0: serial=100495 error=0 01:35:27 Received message from Master: op=Filter serial=100496 01:35:27 Color wheel filter change from 0 to 0 01:35:27 FLIGetFilterPos err=0 currentPosition=0 01:35:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:27 Filter is already there-color wheel unchanged 01:35:27 Received message from Master: op=Shutter serial=100497 01:35:27 Shutter LASER open 01:35:28 Received message from Camera: op=State serial=100499 01:35:28 GetSingleValue result=40 Value=cccccccc 01:35:28 SkyScan query 01:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:35:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:28 Parameters OK 01:35:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:28 Set A/D data flow result=40 01:35:28 Set A/D channel type result=40 01:35:28 Set A/D encoding result=40 01:35:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:28 Set channel filter=0.000000e+000 result=40 01:35:28 Config A/D Result=40 01:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:28 Get A/D filter: -9.255963e+061 result=40 01:35:28 Get A/D value=-858993460 result=40 01:35:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:28 Parameters OK 01:35:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:28 Set A/D data flow result=40 01:35:28 Set A/D channel type result=40 01:35:28 Set A/D encoding result=40 01:35:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:28 Set channel filter=0.000000e+000 result=40 01:35:28 Config A/D Result=40 01:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:28 Get A/D filter: -9.255963e+061 result=40 01:35:28 Get A/D value=-858993460 result=40 01:35:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:28 Aux= 01:35:28 Message to Camera, serial 100499 queued 01:35:37 Received message from Master: op=Shutter serial=100509 01:35:37 Shutter LASER close 01:35:37 Received message from Master: op=PointingHead serial=100513 01:35:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:35:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:35:37 Point started: ret=0 01:35:37 point_skyscan result=0 01:35:38 Check angles 01:35:38 SkyScan query [UTC 2018-12-13 01:35:39] 01:35:39 SkyScan query done: ret=0 az=89.655<-5977 ze=157.035<-1531 Statuses=0009 0009 01:35:39 Msec=0 True Az=89.655 Ze=157.035 Az status=0009 Ze status=0009 01:35:39 Check angles 01:35:39 SkyScan query 01:35:40 SkyScan query done: ret=0 az=72.255<-4817 ze=136.065<-2929 Statuses=0009 0009 01:35:40 Msec=750 True Az=72.255 Ze=136.065 Az status=0009 Ze status=0009 01:35:40 Check angles 01:35:40 SkyScan query 01:35:40 SkyScan query done: ret=0 az=54.795<-3653 ze=115.155<-4323 Statuses=0009 0009 01:35:40 Msec=1500 True Az=54.795 Ze=115.155 Az status=0009 Ze status=0009 01:35:40 Check angles 01:35:40 SkyScan query 01:35:41 SkyScan query done: ret=0 az=40.86<-2724 ze=94.08<-5728 Statuses=0009 0009 01:35:41 Msec=2250 True Az=40.86 Ze=94.08 Az status=0009 Ze status=0009 01:35:41 Check angles 01:35:41 SkyScan query 01:35:42 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 01:35:42 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 01:35:42 Check angles 01:35:42 SkyScan query 01:35:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 01:35:43 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 01:35:43 Check angles 01:35:43 SkyScan query 01:35:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:35:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:35:43 Message to Master queued w/err=0: serial=100513 error=0 01:35:48 Received message from Master: op=Filter serial=100514 01:35:48 Color wheel filter change from 0 to 0 01:35:48 FLIGetFilterPos err=0 currentPosition=0 01:35:48 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:48 Filter is already there-color wheel unchanged 01:35:48 Received message from Master: op=Shutter serial=100515 01:35:48 Shutter LASER close 01:35:49 Received message from Camera: op=State serial=100517 01:35:49 GetSingleValue result=40 Value=cccccccc 01:35:49 SkyScan query 01:35:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:35:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:49 Parameters OK 01:35:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:49 Set A/D data flow result=40 01:35:49 Set A/D channel type result=40 01:35:49 Set A/D encoding result=40 01:35:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:49 Set channel filter=0.000000e+000 result=40 01:35:49 Config A/D Result=40 01:35:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:49 Get A/D filter: -9.255963e+061 result=40 01:35:49 Get A/D value=-858993460 result=40 01:35:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:49 Parameters OK 01:35:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:49 Set A/D data flow result=40 01:35:49 Set A/D channel type result=40 01:35:49 Set A/D encoding result=40 01:35:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:49 Set channel filter=0.000000e+000 result=40 01:35:49 Config A/D Result=40 01:35:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:49 Get A/D filter: -9.255963e+061 result=40 01:35:49 Get A/D value=-858993460 result=40 01:35:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:49 Aux= 01:35:49 Message to Camera, serial 100517 queued [UTC 2018-12-13 01:35:53] 01:36:26 Received message from Master: op=PointingHead serial=100530 01:36:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:36:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:36:27 Point started: ret=0 01:36:27 point_skyscan result=0 01:36:27 Check angles 01:36:27 SkyScan query 01:36:28 SkyScan query done: ret=0 az=40.995<-2733 ze=21.39<-10574 Statuses=0008 0009 01:36:28 Msec=0 True Az=40.995 Ze=21.39 Az status=0008 Ze status=0009 01:36:28 Check angles 01:36:28 SkyScan query 01:36:29 SkyScan query done: ret=0 az=40.995<-2733 ze=0.435<-11971 Statuses=0008 0009 01:36:29 Msec=750 True Az=40.995 Ze=0.435 Az status=0008 Ze status=0009 01:36:29 Check angles 01:36:29 SkyScan query 01:36:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.52<-13368 Statuses=0008 0009 01:36:29 Msec=1500 True Az=40.995 Ze=-20.52 Az status=0008 Ze status=0009 01:36:30 Check angles 01:36:30 SkyScan query 01:36:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 01:36:30 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 01:36:30 Check angles 01:36:30 SkyScan query 01:36:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:36:31 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:36:31 Message to Master queued w/err=0: serial=100530 error=0 01:36:36 Received message from Master: op=Filter serial=100531 01:36:36 Color wheel filter change from 0 to 0 01:36:36 FLIGetFilterPos err=0 currentPosition=0 01:36:36 FLIGetStepsRemaining err=0 RemainingSteps=0 01:36:36 Filter is already there-color wheel unchanged 01:36:36 Received message from Master: op=Shutter serial=100532 01:36:36 Shutter LASER close 01:36:36 Received message from Camera: op=State serial=100534 01:36:36 GetSingleValue result=40 Value=cccccccc 01:36:36 SkyScan query 01:36:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:36:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:37 Parameters OK 01:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:37 Set A/D data flow result=40 01:36:37 Set A/D channel type result=40 01:36:37 Set A/D encoding result=40 01:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:37 Set channel filter=0.000000e+000 result=40 01:36:37 Config A/D Result=40 01:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:37 Get A/D filter: -9.255963e+061 result=40 01:36:37 Get A/D value=-858993460 result=40 01:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:37 Parameters OK 01:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:37 Set A/D data flow result=40 01:36:37 Set A/D channel type result=40 01:36:37 Set A/D encoding result=40 01:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:37 Set channel filter=0.000000e+000 result=40 01:36:37 Config A/D Result=40 01:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:37 Get A/D filter: -9.255963e+061 result=40 01:36:37 Get A/D value=-858993460 result=40 01:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:36:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:36:37 Aux= 01:36:37 Message to Camera, serial 100534 queued 01:37:13 Received message from Master: op=PointingHead serial=100547 01:37:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:37:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:37:14 Point started: ret=0 01:37:14 point_skyscan result=0 01:37:15 Check angles 01:37:15 SkyScan query 01:37:15 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.085<-16539 Statuses=0009 0009 01:37:15 Msec=0 True Az=63.765 Ze=-68.085 Az status=0009 Ze status=0009 01:37:15 Check angles 01:37:15 SkyScan query 01:37:16 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.04<-17936 Statuses=0009 0009 01:37:16 Msec=750 True Az=81.285 Ze=-89.04 Az status=0009 Ze status=0009 01:37:16 Check angles 01:37:16 SkyScan query 01:37:17 SkyScan query done: ret=0 az=98.805<-6587 ze=-109.965<-19331 Statuses=0009 0009 01:37:17 Msec=1500 True Az=98.805 Ze=-109.965 Az status=0009 Ze status=0009 01:37:17 Check angles 01:37:17 SkyScan query 01:37:17 SkyScan query done: ret=0 az=116.25<-7750 ze=-130.935<-20729 Statuses=0009 0009 01:37:17 Msec=2250 True Az=116.25 Ze=-130.935 Az status=0009 Ze status=0009 01:37:18 Check angles 01:37:18 SkyScan query 01:37:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 01:37:18 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 01:37:18 Check angles 01:37:18 SkyScan query 01:37:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:37:19 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:37:19 Message to Master queued w/err=0: serial=100547 error=0 01:37:24 Received message from Master: op=Filter serial=100548 01:37:24 Color wheel filter change from 0 to 0 01:37:24 FLIGetFilterPos err=0 currentPosition=0 01:37:24 FLIGetStepsRemaining err=0 RemainingSteps=0 01:37:24 Filter is already there-color wheel unchanged 01:37:24 Received message from Master: op=Shutter serial=100549 01:37:24 Shutter LASER close 01:37:24 Received message from Camera: op=State serial=100551 01:37:24 GetSingleValue result=40 Value=cccccccc 01:37:24 SkyScan query 01:37:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:37:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:25 Parameters OK 01:37:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:25 Set A/D data flow result=40 01:37:25 Set A/D channel type result=40 01:37:25 Set A/D encoding result=40 01:37:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:25 Set channel filter=0.000000e+000 result=40 01:37:25 Config A/D Result=40 01:37:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:25 Get A/D filter: -9.255963e+061 result=40 01:37:25 Get A/D value=-858993460 result=40 01:37:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:25 Parameters OK 01:37:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:25 Set A/D data flow result=40 01:37:25 Set A/D channel type result=40 01:37:25 Set A/D encoding result=40 01:37:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:25 Set channel filter=0.000000e+000 result=40 01:37:25 Config A/D Result=40 01:37:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:25 Get A/D filter: -9.255963e+061 result=40 01:37:25 Get A/D value=-858993460 result=40 01:37:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:37:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:37:25 Aux= 01:37:25 Message to Camera, serial 100551 queued 01:38:02 Received message from Master: op=PointingHead serial=100564 01:38:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:38:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:38:02 Point started: ret=0 01:38:02 point_skyscan result=0 01:38:03 Check angles 01:38:03 SkyScan query 01:38:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0009 0009 01:38:03 Msec=0 True Az=112.995 Ze=-171.165 Az status=0009 Ze status=0009 01:38:03 Check angles 01:38:03 SkyScan query 01:38:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:38:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:38:04 Message to Master queued w/err=0: serial=100564 error=0 01:38:09 Received message from Master: op=Filter serial=100565 01:38:09 Color wheel filter change from 0 to 0 01:38:09 FLIGetFilterPos err=0 currentPosition=0 01:38:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:38:09 Filter is already there-color wheel unchanged 01:38:09 Received message from Master: op=Shutter serial=100566 01:38:09 Shutter LASER open 01:38:09 Received message from Camera: op=State serial=100568 01:38:09 GetSingleValue result=40 Value=cccccccc 01:38:09 SkyScan query 01:38:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:38:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:10 Parameters OK 01:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:10 Set A/D data flow result=40 01:38:10 Set A/D channel type result=40 01:38:10 Set A/D encoding result=40 01:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:10 Set channel filter=0.000000e+000 result=40 01:38:10 Config A/D Result=40 01:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:10 Get A/D filter: -9.255963e+061 result=40 01:38:10 Get A/D value=-858993460 result=40 01:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:10 Parameters OK 01:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:10 Set A/D data flow result=40 01:38:10 Set A/D channel type result=40 01:38:10 Set A/D encoding result=40 01:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:10 Set channel filter=0.000000e+000 result=40 01:38:10 Config A/D Result=40 01:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:10 Get A/D filter: -9.255963e+061 result=40 01:38:10 Get A/D value=-858993460 result=40 01:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:38:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:38:10 Aux= 01:38:10 Message to Camera, serial 100568 queued 01:38:18 Received message from Master: op=Shutter serial=100578 01:38:18 Shutter LASER close 01:38:19 Received message from Master: op=PointingHead serial=100582 01:38:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:38:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:38:19 Point started: ret=0 01:38:19 point_skyscan result=0 01:38:20 Check angles 01:38:20 SkyScan query 01:38:21 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.19<-21546 Statuses=0009 0009 01:38:21 Msec=0 True Az=135.96 Ze=-143.19 Az status=0009 Ze status=0009 01:38:21 Check angles 01:38:21 SkyScan query 01:38:21 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.22<-20148 Statuses=0009 0009 01:38:21 Msec=750 True Az=153.435 Ze=-122.22 Az status=0009 Ze status=0009 01:38:22 Check angles 01:38:22 SkyScan query 01:38:22 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.325<-18755 Statuses=0009 0009 01:38:22 Msec=1500 True Az=170.955 Ze=-101.325 Az status=0009 Ze status=0009 01:38:22 Check angles 01:38:22 SkyScan query 01:38:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.34<-17356 Statuses=0008 0009 01:38:23 Msec=2250 True Az=176.01 Ze=-80.34 Az status=0008 Ze status=0009 01:38:23 Check angles 01:38:23 SkyScan query 01:38:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.385<-15959 Statuses=0008 0009 01:38:24 Msec=3000 True Az=176.01 Ze=-59.385 Az status=0008 Ze status=0009 01:38:24 Check angles 01:38:24 SkyScan query 01:38:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:38:24 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:38:24 Message to Master queued w/err=0: serial=100582 error=0 01:38:29 Received message from Master: op=Filter serial=100583 01:38:29 Color wheel filter change from 0 to 0 01:38:29 FLIGetFilterPos err=0 currentPosition=0 01:38:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:38:29 Filter is already there-color wheel unchanged 01:38:30 Received message from Master: op=Shutter serial=100584 01:38:30 Shutter LASER close 01:38:30 Received message from Camera: op=State serial=100586 01:38:30 GetSingleValue result=40 Value=cccccccc 01:38:30 SkyScan query 01:38:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:38:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:30 Parameters OK 01:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:30 Set A/D data flow result=40 01:38:30 Set A/D channel type result=40 01:38:30 Set A/D encoding result=40 01:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:30 Set channel filter=0.000000e+000 result=40 01:38:30 Config A/D Result=40 01:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:30 Get A/D filter: -9.255963e+061 result=40 01:38:30 Get A/D value=-858993460 result=40 01:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:30 Parameters OK 01:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:30 Set A/D data flow result=40 01:38:30 Set A/D channel type result=40 01:38:30 Set A/D encoding result=40 01:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:30 Set channel filter=0.000000e+000 result=40 01:38:30 Config A/D Result=40 01:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:30 Get A/D filter: -9.255963e+061 result=40 01:38:30 Get A/D value=-858993460 result=40 01:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:38:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:38:30 Aux= 01:38:30 Message to Camera, serial 100586 queued 01:39:07 Received message from Master: op=PointingHead serial=100599 01:39:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:39:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:39:07 Point started: ret=0 01:39:07 point_skyscan result=0 01:39:08 Check angles 01:39:08 SkyScan query 01:39:09 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.9<-13460 Statuses=0009 0009 01:39:09 Msec=0 True Az=153.09 Ze=-21.9 Az status=0009 Ze status=0009 01:39:09 Check angles 01:39:09 SkyScan query 01:39:10 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.45<-12030 Statuses=0009 0009 01:39:10 Msec=750 True Az=135.255 Ze=-0.45 Az status=0009 Ze status=0009 01:39:10 Check angles 01:39:10 SkyScan query 01:39:10 SkyScan query done: ret=0 az=117.72<-7848 ze=20.49<-10634 Statuses=0009 0009 01:39:10 Msec=1500 True Az=117.72 Ze=20.49 Az status=0009 Ze status=0009 01:39:10 Check angles 01:39:10 SkyScan query 01:39:11 SkyScan query done: ret=0 az=100.335<-6689 ze=41.475<-9235 Statuses=0009 0009 01:39:11 Msec=2250 True Az=100.335 Ze=41.475 Az status=0009 Ze status=0009 01:39:11 Check angles 01:39:11 SkyScan query 01:39:12 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 01:39:12 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 01:39:12 Check angles 01:39:12 SkyScan query 01:39:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:39:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:39:13 Message to Master queued w/err=0: serial=100599 error=0 01:39:18 Received message from Master: op=Filter serial=100600 01:39:18 Color wheel filter change from 0 to 0 01:39:18 FLIGetFilterPos err=0 currentPosition=0 01:39:18 FLIGetStepsRemaining err=0 RemainingSteps=0 01:39:18 Filter is already there-color wheel unchanged 01:39:18 Received message from Master: op=Shutter serial=100601 01:39:18 Shutter LASER close 01:39:18 Received message from Camera: op=State serial=100603 01:39:18 GetSingleValue result=40 Value=cccccccc 01:39:18 SkyScan query 01:39:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:39:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:18 Parameters OK 01:39:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:18 Set A/D data flow result=40 01:39:18 Set A/D channel type result=40 01:39:18 Set A/D encoding result=40 01:39:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:18 Set channel filter=0.000000e+000 result=40 01:39:18 Config A/D Result=40 01:39:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:18 Get A/D filter: -9.255963e+061 result=40 01:39:18 Get A/D value=-858993460 result=40 01:39:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:18 Parameters OK 01:39:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:18 Set A/D data flow result=40 01:39:18 Set A/D channel type result=40 01:39:18 Set A/D encoding result=40 01:39:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:18 Set channel filter=0.000000e+000 result=40 01:39:18 Config A/D Result=40 01:39:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:18 Get A/D filter: -9.255963e+061 result=40 01:39:18 Get A/D value=-858993460 result=40 01:39:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:39:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:39:18 Aux= 01:39:18 Message to Camera, serial 100603 queued 01:39:55 Received message from Master: op=PointingHead serial=100616 01:39:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:39:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:39:56 Point started: ret=0 01:39:56 point_skyscan result=0 01:39:56 Check angles 01:39:56 SkyScan query 01:39:57 SkyScan query done: ret=0 az=85.995<-5733 ze=21.18<-10588 Statuses=0008 0009 01:39:57 Msec=0 True Az=85.995 Ze=21.18 Az status=0008 Ze status=0009 01:39:57 Check angles 01:39:57 SkyScan query 01:39:58 SkyScan query done: ret=0 az=85.995<-5733 ze=0.33<-11978 Statuses=0008 0009 01:39:58 Msec=750 True Az=85.995 Ze=0.33 Az status=0008 Ze status=0009 01:39:58 Check angles 01:39:58 SkyScan query 01:39:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.61<-13374 Statuses=0008 0009 01:39:58 Msec=1500 True Az=85.995 Ze=-20.61 Az status=0008 Ze status=0009 01:39:59 Check angles 01:39:59 SkyScan query 01:39:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.58<-14772 Statuses=0008 0009 01:39:59 Msec=2250 True Az=85.995 Ze=-41.58 Az status=0008 Ze status=0009 01:39:59 Check angles 01:39:59 SkyScan query 01:40:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 01:40:00 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 01:40:00 Message to Master queued w/err=0: serial=100616 error=0 01:40:05 Received message from Master: op=Filter serial=100617 01:40:05 Color wheel filter change from 0 to 0 01:40:05 FLIGetFilterPos err=0 currentPosition=0 01:40:05 FLIGetStepsRemaining err=0 RemainingSteps=0 01:40:05 Filter is already there-color wheel unchanged 01:40:05 Received message from Master: op=Shutter serial=100618 01:40:05 Shutter LASER close 01:40:05 Received message from Camera: op=State serial=100620 01:40:05 GetSingleValue result=40 Value=cccccccc 01:40:05 SkyScan query 01:40:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:40:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:06 Parameters OK 01:40:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:06 Set A/D data flow result=40 01:40:06 Set A/D channel type result=40 01:40:06 Set A/D encoding result=40 01:40:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:06 Set channel filter=0.000000e+000 result=40 01:40:06 Config A/D Result=40 01:40:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:06 Get A/D filter: -9.255963e+061 result=40 01:40:06 Get A/D value=-858993460 result=40 01:40:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:06 Parameters OK 01:40:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:06 Set A/D data flow result=40 01:40:06 Set A/D channel type result=40 01:40:06 Set A/D encoding result=40 01:40:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:06 Set channel filter=0.000000e+000 result=40 01:40:06 Config A/D Result=40 01:40:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:06 Get A/D filter: -9.255963e+061 result=40 01:40:06 Get A/D value=-858993460 result=40 01:40:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:40:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:40:06 Aux= 01:40:06 Message to Camera, serial 100620 queued 01:40:43 Received message from Master: op=PointingHead serial=100633 01:40:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:40:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:40:43 Point started: ret=0 01:40:43 point_skyscan result=0 01:40:44 Check angles 01:40:44 SkyScan query 01:40:44 SkyScan query done: ret=0 az=109.455<-7297 ze=-81.765<-17451 Statuses=0009 0009 01:40:44 Msec=0 True Az=109.455 Ze=-81.765 Az status=0009 Ze status=0009 01:40:44 Check angles 01:40:44 SkyScan query 01:40:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 01:40:45 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 01:40:45 Check angles 01:40:45 SkyScan query 01:40:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 01:40:46 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 01:40:46 Check angles 01:40:46 SkyScan query 01:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.615<-21641 Statuses=0008 0009 01:40:47 Msec=2250 True Az=112.995 Ze=-144.615 Az status=0008 Ze status=0009 01:40:47 Check angles 01:40:47 SkyScan query 01:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.96<-23064 Statuses=0008 0009 01:40:47 Msec=3000 True Az=112.995 Ze=-165.96 Az status=0008 Ze status=0009 01:40:48 Check angles 01:40:48 SkyScan query 01:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:40:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:40:48 Message to Master queued w/err=0: serial=100633 error=0 01:40:53 Received message from Master: op=Filter serial=100634 01:40:53 Color wheel filter change from 0 to 0 01:40:53 FLIGetFilterPos err=0 currentPosition=0 01:40:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:40:53 Filter is already there-color wheel unchanged 01:40:53 Received message from Master: op=Shutter serial=100635 01:40:53 Shutter LASER open 01:40:53 Received message from Camera: op=State serial=100637 01:40:53 GetSingleValue result=40 Value=cccccccc 01:40:53 SkyScan query 01:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:40:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:54 Parameters OK 01:40:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:54 Set A/D data flow result=40 01:40:54 Set A/D channel type result=40 01:40:54 Set A/D encoding result=40 01:40:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:54 Set channel filter=0.000000e+000 result=40 01:40:54 Config A/D Result=40 01:40:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:54 Get A/D filter: -9.255963e+061 result=40 01:40:54 Get A/D value=-858993460 result=40 01:40:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:54 Parameters OK 01:40:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:54 Set A/D data flow result=40 01:40:54 Set A/D channel type result=40 01:40:54 Set A/D encoding result=40 01:40:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:54 Set channel filter=0.000000e+000 result=40 01:40:54 Config A/D Result=40 01:40:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:54 Get A/D filter: -9.255963e+061 result=40 01:40:54 Get A/D value=-858993460 result=40 01:40:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:40:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:40:54 Aux= 01:40:54 Message to Camera, serial 100637 queued 01:41:02 Received message from Master: op=Shutter serial=100647 01:41:02 Shutter LASER close 01:41:03 Received message from Master: op=PointingHead serial=100651 01:41:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:41:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:41:03 Point started: ret=0 01:41:03 point_skyscan result=0 01:41:04 Check angles 01:41:04 SkyScan query 01:41:05 SkyScan query done: ret=0 az=89.655<-5977 ze=157.02<-1532 Statuses=0009 0009 01:41:05 Msec=0 True Az=89.655 Ze=157.02 Az status=0009 Ze status=0009 01:41:05 Check angles 01:41:05 SkyScan query 01:41:05 SkyScan query done: ret=0 az=72.24<-4816 ze=136.08<-2928 Statuses=0009 0009 01:41:05 Msec=750 True Az=72.24 Ze=136.08 Az status=0009 Ze status=0009 01:41:05 Check angles 01:41:05 SkyScan query 01:41:06 SkyScan query done: ret=0 az=54.81<-3654 ze=115.125<-4325 Statuses=0009 0009 01:41:06 Msec=1500 True Az=54.81 Ze=115.125 Az status=0009 Ze status=0009 01:41:06 Check angles 01:41:06 SkyScan query 01:41:07 SkyScan query done: ret=0 az=40.875<-2725 ze=94.155<-5723 Statuses=0009 0009 01:41:07 Msec=2250 True Az=40.875 Ze=94.155 Az status=0009 Ze status=0009 01:41:07 Check angles 01:41:07 SkyScan query 01:41:08 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 01:41:08 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 01:41:08 Check angles 01:41:08 SkyScan query 01:41:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 01:41:08 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 01:41:08 Check angles 01:41:08 SkyScan query 01:41:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:41:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:41:09 Message to Master queued w/err=0: serial=100651 error=0 01:41:14 Received message from Master: op=Filter serial=100652 01:41:14 Color wheel filter change from 0 to 0 01:41:14 FLIGetFilterPos err=0 currentPosition=0 01:41:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:41:14 Filter is already there-color wheel unchanged 01:41:14 Received message from Master: op=Shutter serial=100653 01:41:14 Shutter LASER close 01:41:14 Received message from Camera: op=State serial=100655 01:41:14 GetSingleValue result=40 Value=cccccccc 01:41:14 SkyScan query 01:41:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:41:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:15 Parameters OK 01:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:15 Set A/D data flow result=40 01:41:15 Set A/D channel type result=40 01:41:15 Set A/D encoding result=40 01:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:15 Set channel filter=0.000000e+000 result=40 01:41:15 Config A/D Result=40 01:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:15 Get A/D filter: -9.255963e+061 result=40 01:41:15 Get A/D value=-858993460 result=40 01:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:15 Parameters OK 01:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:15 Set A/D data flow result=40 01:41:15 Set A/D channel type result=40 01:41:15 Set A/D encoding result=40 01:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:15 Set channel filter=0.000000e+000 result=40 01:41:15 Config A/D Result=40 01:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:15 Get A/D filter: -9.255963e+061 result=40 01:41:15 Get A/D value=-858993460 result=40 01:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:41:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:41:15 Aux= 01:41:15 Message to Camera, serial 100655 queued 01:41:52 Received message from Master: op=PointingHead serial=100668 01:41:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:41:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:41:52 Point started: ret=0 01:41:52 point_skyscan result=0 01:41:53 Check angles 01:41:53 SkyScan query 01:41:54 SkyScan query done: ret=0 az=40.995<-2733 ze=21.405<-10573 Statuses=0008 0009 01:41:54 Msec=0 True Az=40.995 Ze=21.405 Az status=0008 Ze status=0009 01:41:54 Check angles 01:41:54 SkyScan query 01:41:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.015<-12001 Statuses=0008 0009 01:41:54 Msec=750 True Az=40.995 Ze=-0.015 Az status=0008 Ze status=0009 01:41:55 Check angles 01:41:55 SkyScan query 01:41:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.955<-13397 Statuses=0008 0009 01:41:55 Msec=1500 True Az=40.995 Ze=-20.955 Az status=0008 Ze status=0009 01:41:55 Check angles 01:41:55 SkyScan query 01:41:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:41:56 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:41:56 Check angles 01:41:56 SkyScan query 01:41:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:41:57 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:41:57 Message to Master queued w/err=0: serial=100668 error=0 01:42:02 Received message from Master: op=Filter serial=100669 01:42:02 Color wheel filter change from 0 to 0 01:42:02 FLIGetFilterPos err=0 currentPosition=0 01:42:02 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:02 Filter is already there-color wheel unchanged 01:42:02 Received message from Master: op=Shutter serial=100670 01:42:02 Shutter LASER close 01:42:02 Received message from Camera: op=State serial=100672 01:42:02 GetSingleValue result=40 Value=cccccccc 01:42:02 SkyScan query 01:42:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:42:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:03 Parameters OK 01:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:03 Set A/D data flow result=40 01:42:03 Set A/D channel type result=40 01:42:03 Set A/D encoding result=40 01:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:03 Set channel filter=0.000000e+000 result=40 01:42:03 Config A/D Result=40 01:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:03 Get A/D filter: -9.255963e+061 result=40 01:42:03 Get A/D value=-858993460 result=40 01:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:03 Parameters OK 01:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:03 Set A/D data flow result=40 01:42:03 Set A/D channel type result=40 01:42:03 Set A/D encoding result=40 01:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:03 Set channel filter=0.000000e+000 result=40 01:42:03 Config A/D Result=40 01:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:03 Get A/D filter: -9.255963e+061 result=40 01:42:03 Get A/D value=-858993460 result=40 01:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:03 Aux= 01:42:03 Message to Camera, serial 100672 queued 01:42:39 Received message from Master: op=PointingHead serial=100685 01:42:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:42:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:42:40 Point started: ret=0 01:42:40 point_skyscan result=0 01:42:40 Check angles 01:42:40 SkyScan query 01:42:41 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.205<-16547 Statuses=0009 0009 01:42:41 Msec=0 True Az=63.855 Ze=-68.205 Az status=0009 Ze status=0009 01:42:41 Check angles 01:42:41 SkyScan query 01:42:42 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.115<-17941 Statuses=0009 0009 01:42:42 Msec=750 True Az=81.3 Ze=-89.115 Az status=0009 Ze status=0009 01:42:42 Check angles 01:42:42 SkyScan query 01:42:43 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.055<-19337 Statuses=0009 0009 01:42:43 Msec=1500 True Az=98.895 Ze=-110.055 Az status=0009 Ze status=0009 01:42:43 Check angles 01:42:43 SkyScan query 01:42:43 SkyScan query done: ret=0 az=116.295<-7753 ze=-131.01<-20734 Statuses=0009 0009 01:42:43 Msec=2250 True Az=116.295 Ze=-131.01 Az status=0009 Ze status=0009 01:42:43 Check angles 01:42:43 SkyScan query 01:42:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 01:42:44 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 01:42:44 Check angles 01:42:44 SkyScan query 01:42:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:42:45 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:42:45 Message to Master queued w/err=0: serial=100685 error=0 01:42:50 Received message from Master: op=Filter serial=100686 01:42:50 Color wheel filter change from 0 to 0 01:42:50 FLIGetFilterPos err=0 currentPosition=0 01:42:50 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:50 Filter is already there-color wheel unchanged 01:42:50 Received message from Master: op=Shutter serial=100687 01:42:50 Shutter LASER close 01:42:50 Received message from Camera: op=State serial=100689 01:42:50 GetSingleValue result=40 Value=cccccccc 01:42:50 SkyScan query 01:42:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:42:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:51 Parameters OK 01:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:51 Set A/D data flow result=40 01:42:51 Set A/D channel type result=40 01:42:51 Set A/D encoding result=40 01:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:51 Set channel filter=0.000000e+000 result=40 01:42:51 Config A/D Result=40 01:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:51 Get A/D filter: -9.255963e+061 result=40 01:42:51 Get A/D value=-858993460 result=40 01:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:51 Parameters OK 01:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:51 Set A/D data flow result=40 01:42:51 Set A/D channel type result=40 01:42:51 Set A/D encoding result=40 01:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:51 Set channel filter=0.000000e+000 result=40 01:42:51 Config A/D Result=40 01:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:51 Get A/D filter: -9.255963e+061 result=40 01:42:51 Get A/D value=-858993460 result=40 01:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:51 Aux= 01:42:51 Message to Camera, serial 100689 queued 01:43:27 Received message from Master: op=PointingHead serial=100702 01:43:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:43:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:43:28 Point started: ret=0 01:43:28 point_skyscan result=0 01:43:28 Check angles 01:43:28 SkyScan query 01:43:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 01:43:29 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 01:43:29 Check angles 01:43:29 SkyScan query 01:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:43:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:43:30 Message to Master queued w/err=0: serial=100702 error=0 01:43:35 Received message from Master: op=Filter serial=100703 01:43:35 Color wheel filter change from 0 to 0 01:43:35 FLIGetFilterPos err=0 currentPosition=0 01:43:35 FLIGetStepsRemaining err=0 RemainingSteps=0 01:43:35 Filter is already there-color wheel unchanged 01:43:35 Received message from Master: op=Shutter serial=100704 01:43:35 Shutter LASER open 01:43:35 Received message from Camera: op=State serial=100706 01:43:35 GetSingleValue result=40 Value=cccccccc 01:43:35 SkyScan query 01:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:43:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:36 Parameters OK 01:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:36 Set A/D data flow result=40 01:43:36 Set A/D channel type result=40 01:43:36 Set A/D encoding result=40 01:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:36 Set channel filter=0.000000e+000 result=40 01:43:36 Config A/D Result=40 01:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:36 Get A/D filter: -9.255963e+061 result=40 01:43:36 Get A/D value=-858993460 result=40 01:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:36 Parameters OK 01:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:36 Set A/D data flow result=40 01:43:36 Set A/D channel type result=40 01:43:36 Set A/D encoding result=40 01:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:36 Set channel filter=0.000000e+000 result=40 01:43:36 Config A/D Result=40 01:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:36 Get A/D filter: -9.255963e+061 result=40 01:43:36 Get A/D value=-858993460 result=40 01:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:43:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:43:36 Aux= 01:43:36 Message to Camera, serial 100706 queued 01:43:44 Received message from Master: op=Shutter serial=100716 01:43:44 Shutter LASER close 01:43:45 Received message from Master: op=PointingHead serial=100720 01:43:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:43:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:43:45 Point started: ret=0 01:43:45 point_skyscan result=0 01:43:46 Check angles 01:43:46 SkyScan query 01:43:46 SkyScan query done: ret=0 az=136.245<-9083 ze=-142.83<-21522 Statuses=0009 0009 01:43:46 Msec=0 True Az=136.245 Ze=-142.83 Az status=0009 Ze status=0009 01:43:47 Check angles 01:43:47 SkyScan query 01:43:47 SkyScan query done: ret=0 az=154.095<-10273 ze=-121.485<-20099 Statuses=0009 0009 01:43:47 Msec=750 True Az=154.095 Ze=-121.485 Az status=0009 Ze status=0009 01:43:47 Check angles 01:43:47 SkyScan query 01:43:48 SkyScan query done: ret=0 az=171.645<-11443 ze=-100.455<-18697 Statuses=0009 0009 01:43:48 Msec=1500 True Az=171.645 Ze=-100.455 Az status=0009 Ze status=0009 01:43:48 Check angles 01:43:48 SkyScan query 01:43:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.575<-17305 Statuses=0008 0009 01:43:49 Msec=2250 True Az=176.01 Ze=-79.575 Az status=0008 Ze status=0009 01:43:49 Check angles 01:43:49 SkyScan query 01:43:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.575<-15905 Statuses=0008 0009 01:43:49 Msec=3000 True Az=176.01 Ze=-58.575 Az status=0008 Ze status=0009 01:43:50 Check angles 01:43:50 SkyScan query 01:43:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 01:43:50 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 01:43:50 Message to Master queued w/err=0: serial=100720 error=0 01:43:55 Received message from Master: op=Filter serial=100721 01:43:55 Color wheel filter change from 0 to 0 01:43:55 FLIGetFilterPos err=0 currentPosition=0 01:43:55 FLIGetStepsRemaining err=0 RemainingSteps=0 01:43:55 Filter is already there-color wheel unchanged 01:43:55 Received message from Master: op=Shutter serial=100722 01:43:55 Shutter LASER close 01:43:56 Received message from Camera: op=State serial=100724 01:43:56 GetSingleValue result=40 Value=cccccccc 01:43:56 SkyScan query 01:43:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:43:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:56 Parameters OK 01:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:56 Set A/D data flow result=40 01:43:56 Set A/D channel type result=40 01:43:56 Set A/D encoding result=40 01:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:56 Set channel filter=0.000000e+000 result=40 01:43:56 Config A/D Result=40 01:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:56 Get A/D filter: -9.255963e+061 result=40 01:43:56 Get A/D value=-858993460 result=40 01:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:56 Parameters OK 01:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:56 Set A/D data flow result=40 01:43:56 Set A/D channel type result=40 01:43:56 Set A/D encoding result=40 01:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:56 Set channel filter=0.000000e+000 result=40 01:43:56 Config A/D Result=40 01:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:56 Get A/D filter: -9.255963e+061 result=40 01:43:56 Get A/D value=-858993460 result=40 01:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:43:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:43:56 Aux= 01:43:56 Message to Camera, serial 100724 queued 01:44:33 Received message from Master: op=PointingHead serial=100737 01:44:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:44:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:44:33 Point started: ret=0 01:44:33 point_skyscan result=0 01:44:34 Check angles 01:44:34 SkyScan query 01:44:35 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.735<-13449 Statuses=0009 0009 01:44:35 Msec=0 True Az=152.955 Ze=-21.735 Az status=0009 Ze status=0009 01:44:35 Check angles 01:44:35 SkyScan query 01:44:35 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.33<-12022 Statuses=0009 0009 01:44:35 Msec=750 True Az=135.135 Ze=-0.33 Az status=0009 Ze status=0009 01:44:36 Check angles 01:44:36 SkyScan query 01:44:36 SkyScan query done: ret=0 az=117.54<-7836 ze=20.61<-10626 Statuses=0009 0009 01:44:36 Msec=1500 True Az=117.54 Ze=20.61 Az status=0009 Ze status=0009 01:44:36 Check angles 01:44:36 SkyScan query 01:44:37 SkyScan query done: ret=0 az=100.245<-6683 ze=41.595<-9227 Statuses=0009 0009 01:44:37 Msec=2250 True Az=100.245 Ze=41.595 Az status=0009 Ze status=0009 01:44:37 Check angles 01:44:37 SkyScan query 01:44:38 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 01:44:38 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 01:44:38 Check angles 01:44:38 SkyScan query 01:44:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:44:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:44:38 Message to Master queued w/err=0: serial=100737 error=0 01:44:43 Received message from Master: op=Filter serial=100738 01:44:43 Color wheel filter change from 0 to 0 01:44:43 FLIGetFilterPos err=0 currentPosition=0 01:44:43 FLIGetStepsRemaining err=0 RemainingSteps=0 01:44:43 Filter is already there-color wheel unchanged 01:44:44 Received message from Master: op=Shutter serial=100739 01:44:44 Shutter LASER close 01:44:44 Received message from Camera: op=State serial=100741 01:44:44 GetSingleValue result=40 Value=cccccccc 01:44:44 SkyScan query 01:44:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:44:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:44 Parameters OK 01:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:44 Set A/D data flow result=40 01:44:44 Set A/D channel type result=40 01:44:44 Set A/D encoding result=40 01:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:44 Set channel filter=0.000000e+000 result=40 01:44:44 Config A/D Result=40 01:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:44 Get A/D filter: -9.255963e+061 result=40 01:44:44 Get A/D value=-858993460 result=40 01:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:44 Parameters OK 01:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:44 Set A/D data flow result=40 01:44:44 Set A/D channel type result=40 01:44:44 Set A/D encoding result=40 01:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:44 Set channel filter=0.000000e+000 result=40 01:44:44 Config A/D Result=40 01:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:44 Get A/D filter: -9.255963e+061 result=40 01:44:44 Get A/D value=-858993460 result=40 01:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:44:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:44:44 Aux= 01:44:44 Message to Camera, serial 100741 queued 01:45:21 Received message from Master: op=PointingHead serial=100754 01:45:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:45:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:45:22 Point started: ret=0 01:45:22 point_skyscan result=0 01:45:22 Check angles 01:45:22 SkyScan query 01:45:23 SkyScan query done: ret=0 az=85.995<-5733 ze=21.825<-10545 Statuses=0008 0009 01:45:23 Msec=0 True Az=85.995 Ze=21.825 Az status=0008 Ze status=0009 01:45:23 Check angles 01:45:23 SkyScan query 01:45:24 SkyScan query done: ret=0 az=85.995<-5733 ze=0.885<-11941 Statuses=0008 0009 01:45:24 Msec=750 True Az=85.995 Ze=0.885 Az status=0008 Ze status=0009 01:45:24 Check angles 01:45:24 SkyScan query 01:45:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.1<-13340 Statuses=0008 0009 01:45:24 Msec=1500 True Az=85.995 Ze=-20.1 Az status=0008 Ze status=0009 01:45:25 Check angles 01:45:25 SkyScan query 01:45:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.01<-14734 Statuses=0008 0009 01:45:25 Msec=2250 True Az=85.995 Ze=-41.01 Az status=0008 Ze status=0009 01:45:25 Check angles 01:45:25 SkyScan query 01:45:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 01:45:26 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 01:45:26 Message to Master queued w/err=0: serial=100754 error=0 01:45:27 Received message from Master: op=Identify serial=100755 01:45:31 Received message from Master: op=Filter serial=100758 01:45:31 Color wheel filter change from 0 to 0 01:45:31 FLIGetFilterPos err=0 currentPosition=0 01:45:31 FLIGetStepsRemaining err=0 RemainingSteps=0 01:45:31 Filter is already there-color wheel unchanged 01:45:31 Received message from Master: op=Shutter serial=100759 01:45:31 Shutter LASER close 01:45:31 Received message from Camera: op=State serial=100761 01:45:31 GetSingleValue result=40 Value=cccccccc 01:45:31 SkyScan query 01:45:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:45:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:32 Parameters OK 01:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:32 Set A/D data flow result=40 01:45:32 Set A/D channel type result=40 01:45:32 Set A/D encoding result=40 01:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:32 Set channel filter=0.000000e+000 result=40 01:45:32 Config A/D Result=40 01:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:32 Get A/D filter: -9.255963e+061 result=40 01:45:32 Get A/D value=-858993460 result=40 01:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:32 Parameters OK 01:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:32 Set A/D data flow result=40 01:45:32 Set A/D channel type result=40 01:45:32 Set A/D encoding result=40 01:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:32 Set channel filter=0.000000e+000 result=40 01:45:32 Config A/D Result=40 01:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:32 Get A/D filter: -9.255963e+061 result=40 01:45:32 Get A/D value=-858993460 result=40 01:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:45:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:45:32 Aux= 01:45:32 Message to Camera, serial 100761 queued 01:46:09 Received message from Master: op=PointingHead serial=100774 01:46:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:46:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:46:09 Point started: ret=0 01:46:09 point_skyscan result=0 01:46:10 Check angles 01:46:10 SkyScan query 01:46:10 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.21<-17414 Statuses=0009 0009 01:46:10 Msec=0 True Az=108.96 Ze=-81.21 Az status=0009 Ze status=0009 01:46:10 Check angles 01:46:10 SkyScan query 01:46:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 01:46:11 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 01:46:11 Check angles 01:46:11 SkyScan query 01:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.12<-20208 Statuses=0008 0009 01:46:12 Msec=1500 True Az=112.995 Ze=-123.12 Az status=0008 Ze status=0009 01:46:12 Check angles 01:46:12 SkyScan query 01:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.075<-21605 Statuses=0008 0009 01:46:12 Msec=2250 True Az=112.995 Ze=-144.075 Az status=0008 Ze status=0009 01:46:13 Check angles 01:46:13 SkyScan query 01:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 01:46:13 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 01:46:13 Check angles 01:46:13 SkyScan query 01:46:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:46:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:46:14 Message to Master queued w/err=0: serial=100774 error=0 01:46:19 Received message from Master: op=Filter serial=100775 01:46:19 Color wheel filter change from 0 to 0 01:46:19 FLIGetFilterPos err=0 currentPosition=0 01:46:19 FLIGetStepsRemaining err=0 RemainingSteps=0 01:46:19 Filter is already there-color wheel unchanged 01:46:19 Received message from Master: op=Shutter serial=100776 01:46:19 Shutter LASER open 01:46:19 Received message from Camera: op=State serial=100778 01:46:19 GetSingleValue result=40 Value=cccccccc 01:46:19 SkyScan query 01:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:46:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2018-12-13 01:46:20] 01:46:20 Parameters OK 01:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:20 Set A/D data flow result=40 01:46:20 Set A/D channel type result=40 01:46:20 Set A/D encoding result=40 01:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:20 Set channel filter=0.000000e+000 result=40 01:46:20 Config A/D Result=40 01:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:20 Get A/D filter: -9.255963e+061 result=40 01:46:20 Get A/D value=-858993460 result=40 01:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:20 Parameters OK 01:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:20 Set A/D data flow result=40 01:46:20 Set A/D channel type result=40 01:46:20 Set A/D encoding result=40 01:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:20 Set channel filter=0.000000e+000 result=40 01:46:20 Config A/D Result=40 01:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:20 Get A/D filter: -9.255963e+061 result=40 01:46:20 Get A/D value=-858993460 result=40 01:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:46:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:46:20 Aux= 01:46:20 Message to Camera, serial 100778 queued 01:46:28 Received message from Master: op=Shutter serial=100787 01:46:28 Shutter LASER close 01:46:28 Received message from Master: op=PointingHead serial=100791 01:46:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:46:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:46:28 Point started: ret=0 01:46:28 point_skyscan result=0 01:46:29 Check angles 01:46:29 SkyScan query 01:46:30 SkyScan query done: ret=0 az=90.09<-6006 ze=157.455<-1503 Statuses=0009 0009 01:46:30 Msec=0 True Az=90.09 Ze=157.455 Az status=0009 Ze status=0009 01:46:30 Check angles 01:46:30 SkyScan query 01:46:30 SkyScan query done: ret=0 az=72.66<-4844 ze=136.455<-2903 Statuses=0009 0009 01:46:30 Msec=750 True Az=72.66 Ze=136.455 Az status=0009 Ze status=0009 01:46:31 Check angles 01:46:31 SkyScan query 01:46:31 SkyScan query done: ret=0 az=55.11<-3674 ze=115.545<-4297 Statuses=0009 0009 01:46:31 Msec=1500 True Az=55.11 Ze=115.545 Az status=0009 Ze status=0009 01:46:31 Check angles 01:46:31 SkyScan query 01:46:32 SkyScan query done: ret=0 az=40.845<-2723 ze=94.545<-5697 Statuses=0009 0009 01:46:32 Msec=2250 True Az=40.845 Ze=94.545 Az status=0009 Ze status=0009 01:46:32 Check angles 01:46:32 SkyScan query 01:46:33 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 01:46:33 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 01:46:33 Check angles 01:46:33 SkyScan query 01:46:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 01:46:33 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 01:46:34 Check angles 01:46:34 SkyScan query 01:46:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:46:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:46:34 Message to Master queued w/err=0: serial=100791 error=0 01:46:39 Received message from Master: op=Filter serial=100792 01:46:39 Color wheel filter change from 0 to 0 01:46:39 FLIGetFilterPos err=0 currentPosition=0 01:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 01:46:39 Filter is already there-color wheel unchanged 01:46:39 Received message from Master: op=Shutter serial=100793 01:46:39 Shutter LASER close 01:46:39 Received message from Camera: op=State serial=100795 01:46:39 GetSingleValue result=40 Value=cccccccc 01:46:39 SkyScan query 01:46:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:40 Parameters OK 01:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:40 Set A/D data flow result=40 01:46:40 Set A/D channel type result=40 01:46:40 Set A/D encoding result=40 01:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:40 Set channel filter=0.000000e+000 result=40 01:46:40 Config A/D Result=40 01:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:40 Get A/D filter: -9.255963e+061 result=40 01:46:40 Get A/D value=-858993460 result=40 01:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:40 Parameters OK 01:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:40 Set A/D data flow result=40 01:46:40 Set A/D channel type result=40 01:46:40 Set A/D encoding result=40 01:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:40 Set channel filter=0.000000e+000 result=40 01:46:40 Config A/D Result=40 01:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:40 Get A/D filter: -9.255963e+061 result=40 01:46:40 Get A/D value=-858993460 result=40 01:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:46:40 Aux= 01:46:40 Message to Camera, serial 100795 queued 01:47:17 Received message from Master: op=PointingHead serial=100808 01:47:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:47:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:47:17 Point started: ret=0 01:47:17 point_skyscan result=0 01:47:18 Check angles 01:47:18 SkyScan query 01:47:19 SkyScan query done: ret=0 az=40.995<-2733 ze=21.75<-10550 Statuses=0008 0009 01:47:19 Msec=0 True Az=40.995 Ze=21.75 Az status=0008 Ze status=0009 01:47:19 Check angles 01:47:19 SkyScan query 01:47:19 SkyScan query done: ret=0 az=40.995<-2733 ze=0.795<-11947 Statuses=0008 0009 01:47:19 Msec=750 True Az=40.995 Ze=0.795 Az status=0008 Ze status=0009 01:47:20 Check angles 01:47:20 SkyScan query 01:47:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.595<-13373 Statuses=0008 0009 01:47:20 Msec=1500 True Az=40.995 Ze=-20.595 Az status=0008 Ze status=0009 01:47:20 Check angles 01:47:20 SkyScan query 01:47:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 01:47:21 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 01:47:21 Check angles 01:47:21 SkyScan query 01:47:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:47:22 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:47:22 Message to Master queued w/err=0: serial=100808 error=0 01:47:27 Received message from Master: op=Filter serial=100809 01:47:27 Color wheel filter change from 0 to 0 01:47:27 FLIGetFilterPos err=0 currentPosition=0 01:47:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:47:27 Filter is already there-color wheel unchanged 01:47:27 Received message from Master: op=Shutter serial=100810 01:47:27 Shutter LASER close 01:47:27 Received message from Camera: op=State serial=100812 01:47:27 GetSingleValue result=40 Value=cccccccc 01:47:27 SkyScan query 01:47:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:47:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:27 Parameters OK 01:47:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:27 Set A/D data flow result=40 01:47:27 Set A/D channel type result=40 01:47:27 Set A/D encoding result=40 01:47:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:27 Set channel filter=0.000000e+000 result=40 01:47:27 Config A/D Result=40 01:47:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:27 Get A/D filter: -9.255963e+061 result=40 01:47:27 Get A/D value=-858993460 result=40 01:47:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:27 Parameters OK 01:47:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:27 Set A/D data flow result=40 01:47:27 Set A/D channel type result=40 01:47:27 Set A/D encoding result=40 01:47:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:27 Set channel filter=0.000000e+000 result=40 01:47:27 Config A/D Result=40 01:47:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:27 Get A/D filter: -9.255963e+061 result=40 01:47:27 Get A/D value=-858993460 result=40 01:47:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:47:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:47:27 Aux= 01:47:27 Message to Camera, serial 100812 queued 01:48:04 Received message from Master: op=PointingHead serial=100825 01:48:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:48:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:48:05 Point started: ret=0 01:48:05 point_skyscan result=0 01:48:05 Check angles 01:48:05 SkyScan query 01:48:06 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.235<-16549 Statuses=0009 0009 01:48:06 Msec=0 True Az=63.945 Ze=-68.235 Az status=0009 Ze status=0009 01:48:06 Check angles 01:48:06 SkyScan query 01:48:07 SkyScan query done: ret=0 az=81.915<-5461 ze=-89.64<-17976 Statuses=0009 0009 01:48:07 Msec=750 True Az=81.915 Ze=-89.64 Az status=0009 Ze status=0009 01:48:07 Check angles 01:48:07 SkyScan query 01:48:08 SkyScan query done: ret=0 az=99.315<-6621 ze=-110.595<-19373 Statuses=0009 0009 01:48:08 Msec=1500 True Az=99.315 Ze=-110.595 Az status=0009 Ze status=0009 01:48:08 Check angles 01:48:08 SkyScan query 01:48:08 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.535<-20769 Statuses=0009 0009 01:48:08 Msec=2250 True Az=116.7 Ze=-131.535 Az status=0009 Ze status=0009 01:48:08 Check angles 01:48:08 SkyScan query 01:48:09 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 01:48:09 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 01:48:09 Check angles 01:48:09 SkyScan query 01:48:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:48:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:48:10 Message to Master queued w/err=0: serial=100825 error=0 01:48:15 Received message from Master: op=Filter serial=100826 01:48:15 Color wheel filter change from 0 to 0 01:48:15 FLIGetFilterPos err=0 currentPosition=0 01:48:15 FLIGetStepsRemaining err=0 RemainingSteps=0 01:48:15 Filter is already there-color wheel unchanged 01:48:15 Received message from Master: op=Shutter serial=100827 01:48:15 Shutter LASER close 01:48:15 Received message from Camera: op=State serial=100829 01:48:15 GetSingleValue result=40 Value=cccccccc 01:48:15 SkyScan query 01:48:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:48:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:16 Parameters OK 01:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:16 Set A/D data flow result=40 01:48:16 Set A/D channel type result=40 01:48:16 Set A/D encoding result=40 01:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:16 Set channel filter=0.000000e+000 result=40 01:48:16 Config A/D Result=40 01:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:16 Get A/D filter: -9.255963e+061 result=40 01:48:16 Get A/D value=-858993460 result=40 01:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:16 Parameters OK 01:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:16 Set A/D data flow result=40 01:48:16 Set A/D channel type result=40 01:48:16 Set A/D encoding result=40 01:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:16 Set channel filter=0.000000e+000 result=40 01:48:16 Config A/D Result=40 01:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:16 Get A/D filter: -9.255963e+061 result=40 01:48:16 Get A/D value=-858993460 result=40 01:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:48:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:48:16 Aux= 01:48:16 Message to Camera, serial 100829 queued 01:48:52 Received message from Master: op=PointingHead serial=100842 01:48:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:48:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:48:53 Point started: ret=0 01:48:53 point_skyscan result=0 01:48:53 Check angles 01:48:53 SkyScan query 01:48:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 01:48:54 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 01:48:54 Check angles 01:48:54 SkyScan query 01:48:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:48:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:48:55 Message to Master queued w/err=0: serial=100842 error=0 01:49:00 Received message from Master: op=Filter serial=100843 01:49:00 Color wheel filter change from 0 to 0 01:49:00 FLIGetFilterPos err=0 currentPosition=0 01:49:00 FLIGetStepsRemaining err=0 RemainingSteps=0 01:49:00 Filter is already there-color wheel unchanged 01:49:00 Received message from Master: op=Shutter serial=100844 01:49:00 Shutter LASER open 01:49:00 Received message from Camera: op=State serial=100846 01:49:00 GetSingleValue result=40 Value=cccccccc 01:49:00 SkyScan query 01:49:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:49:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:01 Parameters OK 01:49:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:01 Set A/D data flow result=40 01:49:01 Set A/D channel type result=40 01:49:01 Set A/D encoding result=40 01:49:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:01 Set channel filter=0.000000e+000 result=40 01:49:01 Config A/D Result=40 01:49:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:01 Get A/D filter: -9.255963e+061 result=40 01:49:01 Get A/D value=-858993460 result=40 01:49:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:01 Parameters OK 01:49:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:01 Set A/D data flow result=40 01:49:01 Set A/D channel type result=40 01:49:01 Set A/D encoding result=40 01:49:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:01 Set channel filter=0.000000e+000 result=40 01:49:01 Config A/D Result=40 01:49:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:01 Get A/D filter: -9.255963e+061 result=40 01:49:01 Get A/D value=-858993460 result=40 01:49:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:49:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:49:01 Aux= 01:49:01 Message to Camera, serial 100846 queued 01:49:09 Received message from Master: op=Shutter serial=100856 01:49:09 Shutter LASER close 01:49:10 Received message from Master: op=PointingHead serial=100860 01:49:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:49:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:49:10 Point started: ret=0 01:49:10 point_skyscan result=0 01:49:11 Check angles 01:49:11 SkyScan query 01:49:11 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.71<-21514 Statuses=0009 0009 01:49:11 Msec=0 True Az=136.365 Ze=-142.71 Az status=0009 Ze status=0009 01:49:12 Check angles 01:49:12 SkyScan query 01:49:12 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.74<-20116 Statuses=0009 0009 01:49:12 Msec=750 True Az=153.81 Ze=-121.74 Az status=0009 Ze status=0009 01:49:12 Check angles 01:49:12 SkyScan query 01:49:13 SkyScan query done: ret=0 az=171.705<-11447 ze=-100.305<-18687 Statuses=0009 0009 01:49:13 Msec=1500 True Az=171.705 Ze=-100.305 Az status=0009 Ze status=0009 01:49:13 Check angles 01:49:13 SkyScan query 01:49:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.41<-17294 Statuses=0008 0009 01:49:14 Msec=2250 True Az=176.01 Ze=-79.41 Az status=0008 Ze status=0009 01:49:14 Check angles 01:49:14 SkyScan query 01:49:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.41<-15894 Statuses=0008 0009 01:49:14 Msec=3000 True Az=176.01 Ze=-58.41 Az status=0008 Ze status=0009 01:49:15 Check angles 01:49:15 SkyScan query 01:49:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 01:49:15 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 01:49:15 Message to Master queued w/err=0: serial=100860 error=0 01:49:20 Received message from Master: op=Filter serial=100861 01:49:20 Color wheel filter change from 0 to 0 01:49:20 FLIGetFilterPos err=0 currentPosition=0 01:49:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:49:20 Filter is already there-color wheel unchanged 01:49:20 Received message from Master: op=Shutter serial=100862 01:49:20 Shutter LASER close 01:49:21 Received message from Camera: op=State serial=100864 01:49:21 GetSingleValue result=40 Value=cccccccc 01:49:21 SkyScan query 01:49:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:49:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:21 Parameters OK 01:49:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:21 Set A/D data flow result=40 01:49:21 Set A/D channel type result=40 01:49:21 Set A/D encoding result=40 01:49:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:21 Set channel filter=0.000000e+000 result=40 01:49:21 Config A/D Result=40 01:49:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:21 Get A/D filter: -9.255963e+061 result=40 01:49:21 Get A/D value=-858993460 result=40 01:49:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:21 Parameters OK 01:49:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:21 Set A/D data flow result=40 01:49:21 Set A/D channel type result=40 01:49:21 Set A/D encoding result=40 01:49:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:21 Set channel filter=0.000000e+000 result=40 01:49:21 Config A/D Result=40 01:49:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:21 Get A/D filter: -9.255963e+061 result=40 01:49:21 Get A/D value=-858993460 result=40 01:49:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:49:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:49:21 Aux= 01:49:21 Message to Camera, serial 100864 queued 01:49:58 Received message from Master: op=PointingHead serial=100877 01:49:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:49:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:49:58 Point started: ret=0 01:49:58 point_skyscan result=0 01:49:59 Check angles 01:49:59 SkyScan query 01:50:00 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.915<-13461 Statuses=0009 0009 01:50:00 Msec=0 True Az=152.97 Ze=-21.915 Az status=0009 Ze status=0009 01:50:00 Check angles 01:50:00 SkyScan query 01:50:00 SkyScan query done: ret=0 az=135.6<-9040 ze=-0.9<-12060 Statuses=0009 0009 01:50:00 Msec=750 True Az=135.6 Ze=-0.9 Az status=0009 Ze status=0009 01:50:01 Check angles 01:50:01 SkyScan query 01:50:01 SkyScan query done: ret=0 az=118.08<-7872 ze=20.025<-10665 Statuses=0009 0009 01:50:01 Msec=1500 True Az=118.08 Ze=20.025 Az status=0009 Ze status=0009 01:50:01 Check angles 01:50:01 SkyScan query 01:50:02 SkyScan query done: ret=0 az=100.695<-6713 ze=41.01<-9266 Statuses=0009 0009 01:50:02 Msec=2250 True Az=100.695 Ze=41.01 Az status=0009 Ze status=0009 01:50:02 Check angles 01:50:02 SkyScan query 01:50:03 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:50:03 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:50:03 Check angles 01:50:03 SkyScan query 01:50:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:50:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:50:03 Message to Master queued w/err=0: serial=100877 error=0 01:50:08 Received message from Master: op=Filter serial=100878 01:50:08 Color wheel filter change from 0 to 0 01:50:08 FLIGetFilterPos err=0 currentPosition=0 01:50:08 FLIGetStepsRemaining err=0 RemainingSteps=0 01:50:08 Filter is already there-color wheel unchanged 01:50:09 Received message from Master: op=Shutter serial=100879 01:50:09 Shutter LASER close 01:50:09 Received message from Camera: op=State serial=100881 01:50:09 GetSingleValue result=40 Value=cccccccc 01:50:09 SkyScan query 01:50:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:50:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:09 Parameters OK 01:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:09 Set A/D data flow result=40 01:50:09 Set A/D channel type result=40 01:50:09 Set A/D encoding result=40 01:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:09 Set channel filter=0.000000e+000 result=40 01:50:09 Config A/D Result=40 01:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:09 Get A/D filter: -9.255963e+061 result=40 01:50:09 Get A/D value=-858993460 result=40 01:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:09 Parameters OK 01:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:09 Set A/D data flow result=40 01:50:09 Set A/D channel type result=40 01:50:09 Set A/D encoding result=40 01:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:09 Set channel filter=0.000000e+000 result=40 01:50:09 Config A/D Result=40 01:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:09 Get A/D filter: -9.255963e+061 result=40 01:50:09 Get A/D value=-858993460 result=40 01:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:50:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:50:09 Aux= 01:50:09 Message to Camera, serial 100881 queued 01:50:46 Received message from Master: op=PointingHead serial=100894 01:50:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:50:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:50:47 Point started: ret=0 01:50:47 point_skyscan result=0 01:50:47 Check angles 01:50:47 SkyScan query 01:50:48 SkyScan query done: ret=0 az=85.995<-5733 ze=21.93<-10538 Statuses=0008 0009 01:50:48 Msec=0 True Az=85.995 Ze=21.93 Az status=0008 Ze status=0009 01:50:48 Check angles 01:50:48 SkyScan query 01:50:49 SkyScan query done: ret=0 az=85.995<-5733 ze=0.99<-11934 Statuses=0008 0009 01:50:49 Msec=750 True Az=85.995 Ze=0.99 Az status=0008 Ze status=0009 01:50:49 Check angles 01:50:49 SkyScan query 01:50:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-19.98<-13332 Statuses=0008 0009 01:50:49 Msec=1500 True Az=85.995 Ze=-19.98 Az status=0008 Ze status=0009 01:50:50 Check angles 01:50:50 SkyScan query 01:50:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.95<-14730 Statuses=0008 0009 01:50:50 Msec=2250 True Az=85.995 Ze=-40.95 Az status=0008 Ze status=0009 01:50:50 Check angles 01:50:50 SkyScan query 01:50:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 01:50:51 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 01:50:51 Message to Master queued w/err=0: serial=100894 error=0 01:50:56 Received message from Master: op=Filter serial=100895 01:50:56 Color wheel filter change from 0 to 0 01:50:56 FLIGetFilterPos err=0 currentPosition=0 01:50:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:50:56 Filter is already there-color wheel unchanged 01:50:56 Received message from Master: op=Shutter serial=100896 01:50:56 Shutter LASER close 01:50:56 Received message from Camera: op=State serial=100898 01:50:56 GetSingleValue result=40 Value=cccccccc 01:50:56 SkyScan query 01:50:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:50:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:57 Parameters OK 01:50:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:57 Set A/D data flow result=40 01:50:57 Set A/D channel type result=40 01:50:57 Set A/D encoding result=40 01:50:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:57 Set channel filter=0.000000e+000 result=40 01:50:57 Config A/D Result=40 01:50:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:57 Get A/D filter: -9.255963e+061 result=40 01:50:57 Get A/D value=-858993460 result=40 01:50:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:57 Parameters OK 01:50:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:57 Set A/D data flow result=40 01:50:57 Set A/D channel type result=40 01:50:57 Set A/D encoding result=40 01:50:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:57 Set channel filter=0.000000e+000 result=40 01:50:57 Config A/D Result=40 01:50:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:57 Get A/D filter: -9.255963e+061 result=40 01:50:57 Get A/D value=-858993460 result=40 01:50:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:50:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:50:57 Aux= 01:50:57 Message to Camera, serial 100898 queued 01:51:34 Received message from Master: op=PointingHead serial=100911 01:51:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:51:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:51:34 Point started: ret=0 01:51:34 point_skyscan result=0 01:51:35 Check angles 01:51:35 SkyScan query 01:51:35 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.195<-17413 Statuses=0009 0009 01:51:35 Msec=0 True Az=109.005 Ze=-81.195 Az status=0009 Ze status=0009 01:51:35 Check angles 01:51:35 SkyScan query 01:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.165<-18811 Statuses=0008 0009 01:51:36 Msec=750 True Az=112.995 Ze=-102.165 Az status=0008 Ze status=0009 01:51:36 Check angles 01:51:36 SkyScan query 01:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.105<-20207 Statuses=0008 0009 01:51:37 Msec=1500 True Az=112.995 Ze=-123.105 Az status=0008 Ze status=0009 01:51:37 Check angles 01:51:37 SkyScan query 01:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.06<-21604 Statuses=0008 0009 01:51:37 Msec=2250 True Az=112.995 Ze=-144.06 Az status=0008 Ze status=0009 01:51:38 Check angles 01:51:38 SkyScan query 01:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.03<-23002 Statuses=0008 0009 01:51:38 Msec=3000 True Az=112.995 Ze=-165.03 Az status=0008 Ze status=0009 01:51:38 Check angles 01:51:38 SkyScan query 01:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:51:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:51:39 Message to Master queued w/err=0: serial=100911 error=0 01:51:44 Received message from Master: op=Filter serial=100912 01:51:44 Color wheel filter change from 0 to 0 01:51:44 FLIGetFilterPos err=0 currentPosition=0 01:51:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:51:44 Filter is already there-color wheel unchanged 01:51:44 Received message from Master: op=Shutter serial=100913 01:51:44 Shutter LASER open 01:51:44 Received message from Camera: op=State serial=100915 01:51:44 GetSingleValue result=40 Value=cccccccc 01:51:44 SkyScan query 01:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:51:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:45 Parameters OK 01:51:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:45 Set A/D data flow result=40 01:51:45 Set A/D channel type result=40 01:51:45 Set A/D encoding result=40 01:51:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:45 Set channel filter=0.000000e+000 result=40 01:51:45 Config A/D Result=40 01:51:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:45 Get A/D filter: -9.255963e+061 result=40 01:51:45 Get A/D value=-858993460 result=40 01:51:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:45 Parameters OK 01:51:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:45 Set A/D data flow result=40 01:51:45 Set A/D channel type result=40 01:51:45 Set A/D encoding result=40 01:51:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:45 Set channel filter=0.000000e+000 result=40 01:51:45 Config A/D Result=40 01:51:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:45 Get A/D filter: -9.255963e+061 result=40 01:51:45 Get A/D value=-858993460 result=40 01:51:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:51:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:51:45 Aux= 01:51:45 Message to Camera, serial 100915 queued 01:51:53 Received message from Master: op=Shutter serial=100925 01:51:53 Shutter LASER close 01:51:54 Received message from Master: op=PointingHead serial=100929 01:51:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:51:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:51:54 Point started: ret=0 01:51:54 point_skyscan result=0 01:51:55 Check angles 01:51:55 SkyScan query 01:51:55 SkyScan query done: ret=0 az=90.03<-6002 ze=157.38<-1508 Statuses=0009 0009 01:51:55 Msec=0 True Az=90.03 Ze=157.38 Az status=0009 Ze status=0009 01:51:56 Check angles 01:51:56 SkyScan query 01:51:56 SkyScan query done: ret=0 az=72.66<-4844 ze=136.395<-2907 Statuses=0009 0009 01:51:56 Msec=750 True Az=72.66 Ze=136.395 Az status=0009 Ze status=0009 01:51:56 Check angles 01:51:56 SkyScan query 01:51:57 SkyScan query done: ret=0 az=54.81<-3654 ze=115.02<-4332 Statuses=0009 0009 01:51:57 Msec=1500 True Az=54.81 Ze=115.02 Az status=0009 Ze status=0009 01:51:57 Check angles 01:51:57 SkyScan query 01:51:58 SkyScan query done: ret=0 az=40.935<-2729 ze=93.63<-5758 Statuses=0009 0009 01:51:58 Msec=2250 True Az=40.935 Ze=93.63 Az status=0009 Ze status=0009 01:51:58 Check angles 01:51:58 SkyScan query 01:51:58 SkyScan query done: ret=0 az=41.01<-2734 ze=72.63<-7158 Statuses=0008 0009 01:51:58 Msec=3000 True Az=41.01 Ze=72.63 Az status=0008 Ze status=0009 01:51:59 Check angles 01:51:59 SkyScan query 01:51:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 01:51:59 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 01:51:59 Check angles 01:51:59 SkyScan query 01:52:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:52:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:52:00 Message to Master queued w/err=0: serial=100929 error=0 01:52:05 Received message from Master: op=Filter serial=100930 01:52:05 Color wheel filter change from 0 to 0 01:52:05 FLIGetFilterPos err=0 currentPosition=0 01:52:05 FLIGetStepsRemaining err=0 RemainingSteps=0 01:52:05 Filter is already there-color wheel unchanged 01:52:05 Received message from Master: op=Shutter serial=100931 01:52:05 Shutter LASER close 01:52:05 Received message from Camera: op=State serial=100933 01:52:05 GetSingleValue result=40 Value=cccccccc 01:52:05 SkyScan query 01:52:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:52:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:06 Parameters OK 01:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:06 Set A/D data flow result=40 01:52:06 Set A/D channel type result=40 01:52:06 Set A/D encoding result=40 01:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:06 Set channel filter=0.000000e+000 result=40 01:52:06 Config A/D Result=40 01:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:06 Get A/D filter: -9.255963e+061 result=40 01:52:06 Get A/D value=-858993460 result=40 01:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:06 Parameters OK 01:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:06 Set A/D data flow result=40 01:52:06 Set A/D channel type result=40 01:52:06 Set A/D encoding result=40 01:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:06 Set channel filter=0.000000e+000 result=40 01:52:06 Config A/D Result=40 01:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:06 Get A/D filter: -9.255963e+061 result=40 01:52:06 Get A/D value=-858993460 result=40 01:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:52:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:52:06 Aux= 01:52:06 Message to Camera, serial 100933 queued 01:52:43 Received message from Master: op=PointingHead serial=100946 01:52:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:52:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:52:43 Point started: ret=0 01:52:43 point_skyscan result=0 01:52:44 Check angles 01:52:44 SkyScan query 01:52:44 SkyScan query done: ret=0 az=40.995<-2733 ze=21.435<-10571 Statuses=0008 0009 01:52:44 Msec=0 True Az=40.995 Ze=21.435 Az status=0008 Ze status=0009 01:52:45 Check angles 01:52:45 SkyScan query 01:52:45 SkyScan query done: ret=0 az=40.995<-2733 ze=0.465<-11969 Statuses=0008 0009 01:52:45 Msec=750 True Az=40.995 Ze=0.465 Az status=0008 Ze status=0009 01:52:45 Check angles 01:52:45 SkyScan query 01:52:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.94<-13396 Statuses=0008 0009 01:52:46 Msec=1500 True Az=40.995 Ze=-20.94 Az status=0008 Ze status=0009 01:52:46 Check angles 01:52:46 SkyScan query 01:52:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:52:47 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:52:47 Check angles 01:52:47 SkyScan query 01:52:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:52:48 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:52:48 Message to Master queued w/err=0: serial=100946 error=0 01:52:53 Received message from Master: op=Filter serial=100947 01:52:53 Color wheel filter change from 0 to 0 01:52:53 FLIGetFilterPos err=0 currentPosition=0 01:52:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:52:53 Filter is already there-color wheel unchanged 01:52:53 Received message from Master: op=Shutter serial=100948 01:52:53 Shutter LASER close 01:52:53 Received message from Camera: op=State serial=100950 01:52:53 GetSingleValue result=40 Value=cccccccc 01:52:53 SkyScan query 01:52:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:52:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:53 Parameters OK 01:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:53 Set A/D data flow result=40 01:52:53 Set A/D channel type result=40 01:52:53 Set A/D encoding result=40 01:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:53 Set channel filter=0.000000e+000 result=40 01:52:53 Config A/D Result=40 01:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:53 Get A/D filter: -9.255963e+061 result=40 01:52:53 Get A/D value=-858993460 result=40 01:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:53 Parameters OK 01:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:53 Set A/D data flow result=40 01:52:53 Set A/D channel type result=40 01:52:53 Set A/D encoding result=40 01:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:53 Set channel filter=0.000000e+000 result=40 01:52:53 Config A/D Result=40 01:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:53 Get A/D filter: -9.255963e+061 result=40 01:52:53 Get A/D value=-858993460 result=40 01:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:52:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:52:53 Aux= 01:52:53 Message to Camera, serial 100950 queued 01:53:30 Received message from Master: op=PointingHead serial=100963 01:53:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:53:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:53:30 Point started: ret=0 01:53:30 point_skyscan result=0 01:53:31 Check angles 01:53:31 SkyScan query 01:53:32 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.13<-16542 Statuses=0009 0009 01:53:32 Msec=0 True Az=63.81 Ze=-68.13 Az status=0009 Ze status=0009 01:53:32 Check angles 01:53:32 SkyScan query 01:53:33 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.115<-17941 Statuses=0009 0009 01:53:33 Msec=750 True Az=81.345 Ze=-89.115 Az status=0009 Ze status=0009 01:53:33 Check angles 01:53:33 SkyScan query 01:53:33 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.04<-19336 Statuses=0009 0009 01:53:33 Msec=1500 True Az=98.895 Ze=-110.04 Az status=0009 Ze status=0009 01:53:33 Check angles 01:53:33 SkyScan query 01:53:34 SkyScan query done: ret=0 az=116.235<-7749 ze=-130.995<-20733 Statuses=0009 0009 01:53:34 Msec=2250 True Az=116.235 Ze=-130.995 Az status=0009 Ze status=0009 01:53:34 Check angles 01:53:34 SkyScan query 01:53:35 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 01:53:35 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 01:53:35 Check angles 01:53:35 SkyScan query 01:53:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:53:36 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:53:36 Message to Master queued w/err=0: serial=100963 error=0 01:53:41 Received message from Master: op=Filter serial=100964 01:53:41 Color wheel filter change from 0 to 0 01:53:41 FLIGetFilterPos err=0 currentPosition=0 01:53:41 FLIGetStepsRemaining err=0 RemainingSteps=0 01:53:41 Filter is already there-color wheel unchanged 01:53:41 Received message from Master: op=Shutter serial=100965 01:53:41 Shutter LASER close 01:53:41 Received message from Camera: op=State serial=100967 01:53:41 GetSingleValue result=40 Value=cccccccc 01:53:41 SkyScan query 01:53:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:53:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:41 Parameters OK 01:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:41 Set A/D data flow result=40 01:53:41 Set A/D channel type result=40 01:53:41 Set A/D encoding result=40 01:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:41 Set channel filter=0.000000e+000 result=40 01:53:41 Config A/D Result=40 01:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:41 Get A/D filter: -9.255963e+061 result=40 01:53:41 Get A/D value=-858993460 result=40 01:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:41 Parameters OK 01:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:41 Set A/D data flow result=40 01:53:41 Set A/D channel type result=40 01:53:41 Set A/D encoding result=40 01:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:41 Set channel filter=0.000000e+000 result=40 01:53:41 Config A/D Result=40 01:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:41 Get A/D filter: -9.255963e+061 result=40 01:53:41 Get A/D value=-858993460 result=40 01:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:53:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:53:41 Aux= 01:53:41 Message to Camera, serial 100967 queued 01:54:18 Received message from Master: op=PointingHead serial=100980 01:54:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:54:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:54:19 Point started: ret=0 01:54:19 point_skyscan result=0 01:54:19 Check angles 01:54:19 SkyScan query 01:54:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.39<-23426 Statuses=0009 0009 01:54:20 Msec=0 True Az=113.01 Ze=-171.39 Az status=0009 Ze status=0009 01:54:20 Check angles 01:54:20 SkyScan query 01:54:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:54:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:54:21 Message to Master queued w/err=0: serial=100980 error=0 01:54:26 Received message from Master: op=Filter serial=100981 01:54:26 Color wheel filter change from 0 to 0 01:54:26 FLIGetFilterPos err=0 currentPosition=0 01:54:26 FLIGetStepsRemaining err=0 RemainingSteps=0 01:54:26 Filter is already there-color wheel unchanged 01:54:26 Received message from Master: op=Shutter serial=100982 01:54:26 Shutter LASER open 01:54:26 Received message from Camera: op=State serial=100984 01:54:26 GetSingleValue result=40 Value=cccccccc 01:54:26 SkyScan query 01:54:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:54:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:27 Parameters OK 01:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:27 Set A/D data flow result=40 01:54:27 Set A/D channel type result=40 01:54:27 Set A/D encoding result=40 01:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:27 Set channel filter=0.000000e+000 result=40 01:54:27 Config A/D Result=40 01:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:27 Get A/D filter: -9.255963e+061 result=40 01:54:27 Get A/D value=-858993460 result=40 01:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:27 Parameters OK 01:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:27 Set A/D data flow result=40 01:54:27 Set A/D channel type result=40 01:54:27 Set A/D encoding result=40 01:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:27 Set channel filter=0.000000e+000 result=40 01:54:27 Config A/D Result=40 01:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:27 Get A/D filter: -9.255963e+061 result=40 01:54:27 Get A/D value=-858993460 result=40 01:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:54:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:54:27 Aux= 01:54:27 Message to Camera, serial 100984 queued 01:54:35 Received message from Master: op=Shutter serial=100994 01:54:35 Shutter LASER close 01:54:36 Received message from Master: op=PointingHead serial=100998 01:54:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:54:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:54:36 Point started: ret=0 01:54:36 point_skyscan result=0 01:54:37 Check angles 01:54:37 SkyScan query 01:54:37 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.755<-21517 Statuses=0009 0009 01:54:37 Msec=0 True Az=136.425 Ze=-142.755 Az status=0009 Ze status=0009 01:54:38 Check angles 01:54:38 SkyScan query 01:54:38 SkyScan query done: ret=0 az=154.035<-10269 ze=-121.755<-20117 Statuses=0009 0009 01:54:38 Msec=750 True Az=154.035 Ze=-121.755 Az status=0009 Ze status=0009 01:54:38 Check angles 01:54:38 SkyScan query 01:54:39 SkyScan query done: ret=0 az=171.78<-11452 ze=-100.35<-18690 Statuses=0009 0009 01:54:39 Msec=1500 True Az=171.78 Ze=-100.35 Az status=0009 Ze status=0009 01:54:39 Check angles 01:54:39 SkyScan query 01:54:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.455<-17297 Statuses=0008 0009 01:54:40 Msec=2250 True Az=176.01 Ze=-79.455 Az status=0008 Ze status=0009 01:54:40 Check angles 01:54:40 SkyScan query 01:54:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 01:54:40 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 01:54:41 Check angles 01:54:41 SkyScan query 01:54:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 01:54:41 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 01:54:41 Message to Master queued w/err=0: serial=100998 error=0 01:54:46 Received message from Master: op=Filter serial=100999 01:54:46 Color wheel filter change from 0 to 0 01:54:46 FLIGetFilterPos err=0 currentPosition=0 01:54:46 FLIGetStepsRemaining err=0 RemainingSteps=0 01:54:46 Filter is already there-color wheel unchanged 01:54:46 Received message from Master: op=Shutter serial=101000 01:54:46 Shutter LASER close 01:54:46 Received message from Camera: op=State serial=101002 01:54:46 GetSingleValue result=40 Value=cccccccc 01:54:46 SkyScan query 01:54:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:54:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:47 Parameters OK 01:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:47 Set A/D data flow result=40 01:54:47 Set A/D channel type result=40 01:54:47 Set A/D encoding result=40 01:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:47 Set channel filter=0.000000e+000 result=40 01:54:47 Config A/D Result=40 01:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:47 Get A/D filter: -9.255963e+061 result=40 01:54:47 Get A/D value=-858993460 result=40 01:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:47 Parameters OK 01:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:47 Set A/D data flow result=40 01:54:47 Set A/D channel type result=40 01:54:47 Set A/D encoding result=40 01:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:47 Set channel filter=0.000000e+000 result=40 01:54:47 Config A/D Result=40 01:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:47 Get A/D filter: -9.255963e+061 result=40 01:54:47 Get A/D value=-858993460 result=40 01:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:54:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:54:47 Aux= 01:54:47 Message to Camera, serial 101002 queued 01:55:24 Received message from Master: op=PointingHead serial=101015 01:55:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:55:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:55:24 Point started: ret=0 01:55:24 point_skyscan result=0 01:55:25 Check angles 01:55:25 SkyScan query 01:55:26 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.05<-13470 Statuses=0009 0009 01:55:26 Msec=0 True Az=153.225 Ze=-22.05 Az status=0009 Ze status=0009 01:55:26 Check angles 01:55:26 SkyScan query 01:55:26 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.05<-12070 Statuses=0009 0009 01:55:26 Msec=750 True Az=135.795 Ze=-1.05 Az status=0009 Ze status=0009 01:55:26 Check angles 01:55:26 SkyScan query 01:55:27 SkyScan query done: ret=0 az=118.275<-7885 ze=19.89<-10674 Statuses=0009 0009 01:55:27 Msec=1500 True Az=118.275 Ze=19.89 Az status=0009 Ze status=0009 01:55:27 Check angles 01:55:27 SkyScan query 01:55:28 SkyScan query done: ret=0 az=100.86<-6724 ze=40.86<-9276 Statuses=0009 0009 01:55:28 Msec=2250 True Az=100.86 Ze=40.86 Az status=0009 Ze status=0009 01:55:28 Check angles 01:55:28 SkyScan query 01:55:29 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:55:29 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:55:29 Check angles 01:55:29 SkyScan query 01:55:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:55:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:55:29 Message to Master queued w/err=0: serial=101015 error=0 01:55:34 Received message from Master: op=Filter serial=101016 01:55:34 Color wheel filter change from 0 to 0 01:55:34 FLIGetFilterPos err=0 currentPosition=0 01:55:34 FLIGetStepsRemaining err=0 RemainingSteps=0 01:55:34 Filter is already there-color wheel unchanged 01:55:34 Received message from Master: op=Shutter serial=101017 01:55:34 Shutter LASER close 01:55:35 Received message from Camera: op=State serial=101019 01:55:35 GetSingleValue result=40 Value=cccccccc 01:55:35 SkyScan query 01:55:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:55:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:35 Parameters OK 01:55:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:35 Set A/D data flow result=40 01:55:35 Set A/D channel type result=40 01:55:35 Set A/D encoding result=40 01:55:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:35 Set channel filter=0.000000e+000 result=40 01:55:35 Config A/D Result=40 01:55:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:35 Get A/D filter: -9.255963e+061 result=40 01:55:35 Get A/D value=-858993460 result=40 01:55:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:35 Parameters OK 01:55:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:35 Set A/D data flow result=40 01:55:35 Set A/D channel type result=40 01:55:35 Set A/D encoding result=40 01:55:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:35 Set channel filter=0.000000e+000 result=40 01:55:35 Config A/D Result=40 01:55:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:35 Get A/D filter: -9.255963e+061 result=40 01:55:35 Get A/D value=-858993460 result=40 01:55:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:55:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:55:35 Aux= 01:55:35 Message to Camera, serial 101019 queued [UTC 2018-12-13 01:55:53] 01:56:12 Received message from Master: op=PointingHead serial=101032 01:56:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:56:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:56:12 Point started: ret=0 01:56:12 point_skyscan result=0 01:56:13 Check angles 01:56:13 SkyScan query 01:56:14 SkyScan query done: ret=0 az=85.995<-5733 ze=21.495<-10567 Statuses=0008 0009 01:56:14 Msec=0 True Az=85.995 Ze=21.495 Az status=0008 Ze status=0009 01:56:14 Check angles 01:56:14 SkyScan query 01:56:14 SkyScan query done: ret=0 az=85.995<-5733 ze=0.105<-11993 Statuses=0008 0009 01:56:14 Msec=750 True Az=85.995 Ze=0.105 Az status=0008 Ze status=0009 01:56:15 Check angles 01:56:15 SkyScan query 01:56:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.835<-13389 Statuses=0008 0009 01:56:15 Msec=1500 True Az=85.995 Ze=-20.835 Az status=0008 Ze status=0009 01:56:15 Check angles 01:56:15 SkyScan query 01:56:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.775<-14785 Statuses=0008 0009 01:56:16 Msec=2250 True Az=85.995 Ze=-41.775 Az status=0008 Ze status=0009 01:56:16 Check angles 01:56:16 SkyScan query 01:56:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 01:56:17 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 01:56:17 Message to Master queued w/err=0: serial=101032 error=0 01:56:22 Received message from Master: op=Filter serial=101033 01:56:22 Color wheel filter change from 0 to 0 01:56:22 FLIGetFilterPos err=0 currentPosition=0 01:56:22 FLIGetStepsRemaining err=0 RemainingSteps=0 01:56:22 Filter is already there-color wheel unchanged 01:56:22 Received message from Master: op=Shutter serial=101034 01:56:22 Shutter LASER close 01:56:22 Received message from Camera: op=State serial=101036 01:56:22 GetSingleValue result=40 Value=cccccccc 01:56:22 SkyScan query 01:56:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:56:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:23 Parameters OK 01:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:23 Set A/D data flow result=40 01:56:23 Set A/D channel type result=40 01:56:23 Set A/D encoding result=40 01:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:23 Set channel filter=0.000000e+000 result=40 01:56:23 Config A/D Result=40 01:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:23 Get A/D filter: -9.255963e+061 result=40 01:56:23 Get A/D value=-858993460 result=40 01:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:23 Parameters OK 01:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:23 Set A/D data flow result=40 01:56:23 Set A/D channel type result=40 01:56:23 Set A/D encoding result=40 01:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:23 Set channel filter=0.000000e+000 result=40 01:56:23 Config A/D Result=40 01:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:23 Get A/D filter: -9.255963e+061 result=40 01:56:23 Get A/D value=-858993460 result=40 01:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:56:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:56:23 Aux= 01:56:23 Message to Camera, serial 101036 queued 01:56:59 Received message from Master: op=PointingHead serial=101049 01:56:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:56:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:57:00 Point started: ret=0 01:57:00 point_skyscan result=0 01:57:00 Check angles 01:57:00 SkyScan query 01:57:01 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.6<-17440 Statuses=0009 0009 01:57:01 Msec=0 True Az=109.185 Ze=-81.6 Az status=0009 Ze status=0009 01:57:01 Check angles 01:57:01 SkyScan query 01:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 01:57:02 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 01:57:02 Check angles 01:57:02 SkyScan query 01:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 01:57:03 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 01:57:03 Check angles 01:57:03 SkyScan query 01:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 01:57:03 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 01:57:03 Check angles 01:57:03 SkyScan query 01:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 01:57:04 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 01:57:04 Check angles 01:57:04 SkyScan query 01:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:57:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:57:05 Message to Master queued w/err=0: serial=101049 error=0 01:57:10 Received message from Master: op=Filter serial=101050 01:57:10 Color wheel filter change from 0 to 0 01:57:10 FLIGetFilterPos err=0 currentPosition=0 01:57:10 FLIGetStepsRemaining err=0 RemainingSteps=0 01:57:10 Filter is already there-color wheel unchanged 01:57:10 Received message from Master: op=Shutter serial=101051 01:57:10 Shutter LASER open 01:57:10 Received message from Camera: op=State serial=101053 01:57:10 GetSingleValue result=40 Value=cccccccc 01:57:10 SkyScan query 01:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:57:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:11 Parameters OK 01:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:11 Set A/D data flow result=40 01:57:11 Set A/D channel type result=40 01:57:11 Set A/D encoding result=40 01:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:11 Set channel filter=0.000000e+000 result=40 01:57:11 Config A/D Result=40 01:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:11 Get A/D filter: -9.255963e+061 result=40 01:57:11 Get A/D value=-858993460 result=40 01:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:11 Parameters OK 01:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:11 Set A/D data flow result=40 01:57:11 Set A/D channel type result=40 01:57:11 Set A/D encoding result=40 01:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:11 Set channel filter=0.000000e+000 result=40 01:57:11 Config A/D Result=40 01:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:11 Get A/D filter: -9.255963e+061 result=40 01:57:11 Get A/D value=-858993460 result=40 01:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:57:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:57:11 Aux= 01:57:11 Message to Camera, serial 101053 queued 01:57:19 Received message from Master: op=Shutter serial=101063 01:57:19 Shutter LASER close 01:57:20 Received message from Master: op=PointingHead serial=101067 01:57:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:57:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:57:20 Point started: ret=0 01:57:20 point_skyscan result=0 01:57:21 Check angles 01:57:21 SkyScan query 01:57:21 SkyScan query done: ret=0 az=89.67<-5978 ze=157.08<-1528 Statuses=0009 0009 01:57:21 Msec=0 True Az=89.67 Ze=157.08 Az status=0009 Ze status=0009 01:57:21 Check angles 01:57:21 SkyScan query 01:57:22 SkyScan query done: ret=0 az=71.82<-4788 ze=135.675<-2955 Statuses=0009 0009 01:57:22 Msec=750 True Az=71.82 Ze=135.675 Az status=0009 Ze status=0009 01:57:22 Check angles 01:57:22 SkyScan query 01:57:23 SkyScan query done: ret=0 az=54.615<-3641 ze=114.705<-4353 Statuses=0009 0009 01:57:23 Msec=1500 True Az=54.615 Ze=114.705 Az status=0009 Ze status=0009 01:57:23 Check angles 01:57:23 SkyScan query 01:57:24 SkyScan query done: ret=0 az=40.92<-2728 ze=93.75<-5750 Statuses=0009 0009 01:57:24 Msec=2250 True Az=40.92 Ze=93.75 Az status=0009 Ze status=0009 01:57:24 Check angles 01:57:24 SkyScan query 01:57:24 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 01:57:24 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 01:57:24 Check angles 01:57:24 SkyScan query 01:57:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.23<-8518 Statuses=0008 0009 01:57:25 Msec=3750 True Az=40.995 Ze=52.23 Az status=0008 Ze status=0009 01:57:25 Check angles 01:57:25 SkyScan query 01:57:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:57:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:57:26 Message to Master queued w/err=0: serial=101067 error=0 01:57:31 Received message from Master: op=Filter serial=101068 01:57:31 Color wheel filter change from 0 to 0 01:57:31 FLIGetFilterPos err=0 currentPosition=0 01:57:31 FLIGetStepsRemaining err=0 RemainingSteps=0 01:57:31 Filter is already there-color wheel unchanged 01:57:31 Received message from Master: op=Shutter serial=101069 01:57:31 Shutter LASER close 01:57:31 Received message from Camera: op=State serial=101071 01:57:31 GetSingleValue result=40 Value=cccccccc 01:57:31 SkyScan query 01:57:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:57:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:32 Parameters OK 01:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:32 Set A/D data flow result=40 01:57:32 Set A/D channel type result=40 01:57:32 Set A/D encoding result=40 01:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:32 Set channel filter=0.000000e+000 result=40 01:57:32 Config A/D Result=40 01:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:32 Get A/D filter: -9.255963e+061 result=40 01:57:32 Get A/D value=-858993460 result=40 01:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:32 Parameters OK 01:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:32 Set A/D data flow result=40 01:57:32 Set A/D channel type result=40 01:57:32 Set A/D encoding result=40 01:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:32 Set channel filter=0.000000e+000 result=40 01:57:32 Config A/D Result=40 01:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:32 Get A/D filter: -9.255963e+061 result=40 01:57:32 Get A/D value=-858993460 result=40 01:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:57:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:57:32 Aux= 01:57:32 Message to Camera, serial 101071 queued 01:58:09 Received message from Master: op=PointingHead serial=101084 01:58:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:58:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:58:09 Point started: ret=0 01:58:09 point_skyscan result=0 01:58:10 Check angles 01:58:10 SkyScan query 01:58:10 SkyScan query done: ret=0 az=40.995<-2733 ze=21.75<-10550 Statuses=0008 0009 01:58:10 Msec=0 True Az=40.995 Ze=21.75 Az status=0008 Ze status=0009 01:58:11 Check angles 01:58:11 SkyScan query 01:58:11 SkyScan query done: ret=0 az=40.995<-2733 ze=0.36<-11976 Statuses=0008 0009 01:58:11 Msec=750 True Az=40.995 Ze=0.36 Az status=0008 Ze status=0009 01:58:11 Check angles 01:58:11 SkyScan query 01:58:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.58<-13372 Statuses=0008 0009 01:58:12 Msec=1500 True Az=40.995 Ze=-20.58 Az status=0008 Ze status=0009 01:58:12 Check angles 01:58:12 SkyScan query 01:58:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 01:58:13 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 01:58:13 Check angles 01:58:13 SkyScan query 01:58:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:58:13 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:58:13 Message to Master queued w/err=0: serial=101084 error=0 01:58:18 Received message from Master: op=Filter serial=101085 01:58:18 Color wheel filter change from 0 to 0 01:58:18 FLIGetFilterPos err=0 currentPosition=0 01:58:18 FLIGetStepsRemaining err=0 RemainingSteps=0 01:58:18 Filter is already there-color wheel unchanged 01:58:19 Received message from Master: op=Shutter serial=101086 01:58:19 Shutter LASER close 01:58:19 Received message from Camera: op=State serial=101088 01:58:19 GetSingleValue result=40 Value=cccccccc 01:58:19 SkyScan query 01:58:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:58:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:19 Parameters OK 01:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:19 Set A/D data flow result=40 01:58:19 Set A/D channel type result=40 01:58:19 Set A/D encoding result=40 01:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:19 Set channel filter=0.000000e+000 result=40 01:58:19 Config A/D Result=40 01:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:19 Get A/D filter: -9.255963e+061 result=40 01:58:19 Get A/D value=-858993460 result=40 01:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:19 Parameters OK 01:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:19 Set A/D data flow result=40 01:58:19 Set A/D channel type result=40 01:58:19 Set A/D encoding result=40 01:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:19 Set channel filter=0.000000e+000 result=40 01:58:19 Config A/D Result=40 01:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:19 Get A/D filter: -9.255963e+061 result=40 01:58:19 Get A/D value=-858993460 result=40 01:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:58:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:58:19 Aux= 01:58:19 Message to Camera, serial 101088 queued 01:58:56 Received message from Master: op=PointingHead serial=101101 01:58:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:58:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:58:56 Point started: ret=0 01:58:56 point_skyscan result=0 01:58:57 Check angles 01:58:57 SkyScan query 01:58:58 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.61<-16574 Statuses=0009 0009 01:58:58 Msec=0 True Az=64.17 Ze=-68.61 Az status=0009 Ze status=0009 01:58:58 Check angles 01:58:58 SkyScan query 01:58:58 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.595<-17973 Statuses=0009 0009 01:58:58 Msec=750 True Az=81.81 Ze=-89.595 Az status=0009 Ze status=0009 01:58:59 Check angles 01:58:59 SkyScan query 01:58:59 SkyScan query done: ret=0 az=99.3<-6620 ze=-110.58<-19372 Statuses=0009 0009 01:58:59 Msec=1500 True Az=99.3 Ze=-110.58 Az status=0009 Ze status=0009 01:58:59 Check angles 01:58:59 SkyScan query 01:59:00 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.955<-20797 Statuses=0009 0009 01:59:00 Msec=2250 True Az=117.075 Ze=-131.955 Az status=0009 Ze status=0009 01:59:00 Check angles 01:59:00 SkyScan query 01:59:01 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 01:59:01 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 01:59:01 Check angles 01:59:01 SkyScan query 01:59:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:59:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:59:01 Message to Master queued w/err=0: serial=101101 error=0 01:59:06 Received message from Master: op=Filter serial=101102 01:59:06 Color wheel filter change from 0 to 0 01:59:06 FLIGetFilterPos err=0 currentPosition=0 01:59:06 FLIGetStepsRemaining err=0 RemainingSteps=0 01:59:06 Filter is already there-color wheel unchanged 01:59:07 Received message from Master: op=Shutter serial=101103 01:59:07 Shutter LASER close 01:59:07 Received message from Camera: op=State serial=101105 01:59:07 GetSingleValue result=40 Value=cccccccc 01:59:07 SkyScan query 01:59:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:59:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:07 Parameters OK 01:59:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:07 Set A/D data flow result=40 01:59:07 Set A/D channel type result=40 01:59:07 Set A/D encoding result=40 01:59:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:07 Set channel filter=0.000000e+000 result=40 01:59:07 Config A/D Result=40 01:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:07 Get A/D filter: -9.255963e+061 result=40 01:59:07 Get A/D value=-858993460 result=40 01:59:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:07 Parameters OK 01:59:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:07 Set A/D data flow result=40 01:59:07 Set A/D channel type result=40 01:59:07 Set A/D encoding result=40 01:59:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:07 Set channel filter=0.000000e+000 result=40 01:59:07 Config A/D Result=40 01:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:07 Get A/D filter: -9.255963e+061 result=40 01:59:07 Get A/D value=-858993460 result=40 01:59:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:59:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:59:07 Aux= 01:59:07 Message to Camera, serial 101105 queued 01:59:43 Received message from Master: op=PointingHead serial=101117 01:59:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:59:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:59:43 Point started: ret=0 01:59:43 point_skyscan result=0 01:59:44 Check angles 01:59:44 SkyScan query 01:59:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 01:59:45 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 01:59:45 Check angles 01:59:45 SkyScan query 01:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:59:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:59:46 Message to Master queued w/err=0: serial=101117 error=0 01:59:51 Received message from Master: op=Filter serial=101118 01:59:51 Color wheel filter change from 0 to 0 01:59:51 FLIGetFilterPos err=0 currentPosition=0 01:59:51 FLIGetStepsRemaining err=0 RemainingSteps=0 01:59:51 Filter is already there-color wheel unchanged 01:59:51 Received message from Master: op=Shutter serial=101119 01:59:51 Shutter LASER open 01:59:51 Received message from Camera: op=State serial=101121 01:59:51 GetSingleValue result=40 Value=cccccccc 01:59:51 SkyScan query 01:59:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:59:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:52 Parameters OK 01:59:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:52 Set A/D data flow result=40 01:59:52 Set A/D channel type result=40 01:59:52 Set A/D encoding result=40 01:59:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:52 Set channel filter=0.000000e+000 result=40 01:59:52 Config A/D Result=40 01:59:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:52 Get A/D filter: -9.255963e+061 result=40 01:59:52 Get A/D value=-858993460 result=40 01:59:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:52 Parameters OK 01:59:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:52 Set A/D data flow result=40 01:59:52 Set A/D channel type result=40 01:59:52 Set A/D encoding result=40 01:59:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:52 Set channel filter=0.000000e+000 result=40 01:59:52 Config A/D Result=40 01:59:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:52 Get A/D filter: -9.255963e+061 result=40 01:59:52 Get A/D value=-858993460 result=40 01:59:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:59:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:59:52 Aux= 01:59:52 Message to Camera, serial 101121 queued 02:00:00 Received message from Master: op=Shutter serial=101131 02:00:00 Shutter LASER close 02:00:01 Received message from Master: op=PointingHead serial=101135 02:00:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:00:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:00:01 Point started: ret=0 02:00:01 point_skyscan result=0 02:00:02 Check angles 02:00:02 SkyScan query 02:00:02 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.445<-21563 Statuses=0009 0009 02:00:02 Msec=0 True Az=135.825 Ze=-143.445 Az status=0009 Ze status=0009 02:00:02 Check angles 02:00:02 SkyScan query 02:00:03 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.49<-20166 Statuses=0009 0009 02:00:03 Msec=750 True Az=153.375 Ze=-122.49 Az status=0009 Ze status=0009 02:00:03 Check angles 02:00:03 SkyScan query 02:00:04 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.115<-18741 Statuses=0009 0009 02:00:04 Msec=1500 True Az=171.225 Ze=-101.115 Az status=0009 Ze status=0009 02:00:04 Check angles 02:00:04 SkyScan query 02:00:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 02:00:04 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 02:00:05 Check angles 02:00:05 SkyScan query 02:00:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.725<-15915 Statuses=0008 0009 02:00:05 Msec=3000 True Az=176.01 Ze=-58.725 Az status=0008 Ze status=0009 02:00:05 Check angles 02:00:05 SkyScan query 02:00:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:00:06 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:00:06 Message to Master queued w/err=0: serial=101135 error=0 02:00:11 Received message from Master: op=Filter serial=101136 02:00:11 Color wheel filter change from 0 to 0 02:00:11 FLIGetFilterPos err=0 currentPosition=0 02:00:11 FLIGetStepsRemaining err=0 RemainingSteps=0 02:00:11 Filter is already there-color wheel unchanged 02:00:11 Received message from Master: op=Shutter serial=101137 02:00:11 Shutter LASER close 02:00:11 Received message from Camera: op=State serial=101139 02:00:11 GetSingleValue result=40 Value=cccccccc 02:00:11 SkyScan query 02:00:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:00:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:12 Parameters OK 02:00:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:12 Set A/D data flow result=40 02:00:12 Set A/D channel type result=40 02:00:12 Set A/D encoding result=40 02:00:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:12 Set channel filter=0.000000e+000 result=40 02:00:12 Config A/D Result=40 02:00:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:12 Get A/D filter: -9.255963e+061 result=40 02:00:12 Get A/D value=-858993460 result=40 02:00:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:12 Parameters OK 02:00:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:12 Set A/D data flow result=40 02:00:12 Set A/D channel type result=40 02:00:12 Set A/D encoding result=40 02:00:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:12 Set channel filter=0.000000e+000 result=40 02:00:12 Config A/D Result=40 02:00:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:12 Get A/D filter: -9.255963e+061 result=40 02:00:12 Get A/D value=-858993460 result=40 02:00:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:00:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:00:12 Aux= 02:00:12 Message to Camera, serial 101139 queued 02:00:49 Received message from Master: op=PointingHead serial=101152 02:00:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:00:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:00:49 Point started: ret=0 02:00:49 point_skyscan result=0 02:00:50 Check angles 02:00:50 SkyScan query 02:00:50 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.45<-13430 Statuses=0009 0009 02:00:50 Msec=0 True Az=152.775 Ze=-21.45 Az status=0009 Ze status=0009 02:00:51 Check angles 02:00:51 SkyScan query 02:00:51 SkyScan query done: ret=0 az=134.925<-8995 ze=-0.03<-12002 Statuses=0009 0009 02:00:51 Msec=750 True Az=134.925 Ze=-0.03 Az status=0009 Ze status=0009 02:00:51 Check angles 02:00:51 SkyScan query 02:00:52 SkyScan query done: ret=0 az=117.39<-7826 ze=20.925<-10605 Statuses=0009 0009 02:00:52 Msec=1500 True Az=117.39 Ze=20.925 Az status=0009 Ze status=0009 02:00:52 Check angles 02:00:52 SkyScan query 02:00:53 SkyScan query done: ret=0 az=99.99<-6666 ze=41.895<-9207 Statuses=0009 0009 02:00:53 Msec=2250 True Az=99.99 Ze=41.895 Az status=0009 Ze status=0009 02:00:53 Check angles 02:00:53 SkyScan query 02:00:53 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 02:00:53 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 02:00:54 Check angles 02:00:54 SkyScan query 02:00:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:00:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:00:54 Message to Master queued w/err=0: serial=101152 error=0 02:00:59 Received message from Master: op=Filter serial=101153 02:00:59 Color wheel filter change from 0 to 0 02:00:59 FLIGetFilterPos err=0 currentPosition=0 02:00:59 FLIGetStepsRemaining err=0 RemainingSteps=0 02:00:59 Filter is already there-color wheel unchanged 02:00:59 Received message from Master: op=Shutter serial=101154 02:00:59 Shutter LASER close 02:00:59 Received message from Camera: op=State serial=101156 02:00:59 GetSingleValue result=40 Value=cccccccc 02:00:59 SkyScan query 02:01:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:01:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:00 Parameters OK 02:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:00 Set A/D data flow result=40 02:01:00 Set A/D channel type result=40 02:01:00 Set A/D encoding result=40 02:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:00 Set channel filter=0.000000e+000 result=40 02:01:00 Config A/D Result=40 02:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:00 Get A/D filter: -9.255963e+061 result=40 02:01:00 Get A/D value=-858993460 result=40 02:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:00 Parameters OK 02:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:00 Set A/D data flow result=40 02:01:00 Set A/D channel type result=40 02:01:00 Set A/D encoding result=40 02:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:00 Set channel filter=0.000000e+000 result=40 02:01:00 Config A/D Result=40 02:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:00 Get A/D filter: -9.255963e+061 result=40 02:01:00 Get A/D value=-858993460 result=40 02:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:01:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:01:00 Aux= 02:01:00 Message to Camera, serial 101156 queued 02:01:37 Received message from Master: op=PointingHead serial=101169 02:01:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:01:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:01:37 Point started: ret=0 02:01:37 point_skyscan result=0 02:01:38 Check angles 02:01:38 SkyScan query 02:01:39 SkyScan query done: ret=0 az=85.98<-5732 ze=21.84<-10544 Statuses=0008 0009 02:01:39 Msec=0 True Az=85.98 Ze=21.84 Az status=0008 Ze status=0009 02:01:39 Check angles 02:01:39 SkyScan query 02:01:39 SkyScan query done: ret=0 az=85.995<-5733 ze=0.93<-11938 Statuses=0008 0009 02:01:39 Msec=750 True Az=85.995 Ze=0.93 Az status=0008 Ze status=0009 02:01:40 Check angles 02:01:40 SkyScan query 02:01:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.505<-13367 Statuses=0008 0009 02:01:40 Msec=1500 True Az=85.995 Ze=-20.505 Az status=0008 Ze status=0009 02:01:40 Check angles 02:01:40 SkyScan query 02:01:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.415<-14761 Statuses=0008 0009 02:01:41 Msec=2250 True Az=85.995 Ze=-41.415 Az status=0008 Ze status=0009 02:01:41 Check angles 02:01:41 SkyScan query 02:01:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:01:42 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:01:42 Message to Master queued w/err=0: serial=101169 error=0 02:01:47 Received message from Master: op=Filter serial=101170 02:01:47 Color wheel filter change from 0 to 0 02:01:47 FLIGetFilterPos err=0 currentPosition=0 02:01:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:01:47 Filter is already there-color wheel unchanged 02:01:47 Received message from Master: op=Shutter serial=101171 02:01:47 Shutter LASER close 02:01:47 Received message from Camera: op=State serial=101173 02:01:47 GetSingleValue result=40 Value=cccccccc 02:01:47 SkyScan query 02:01:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:01:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:47 Parameters OK 02:01:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:47 Set A/D data flow result=40 02:01:47 Set A/D channel type result=40 02:01:47 Set A/D encoding result=40 02:01:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:47 Set channel filter=0.000000e+000 result=40 02:01:47 Config A/D Result=40 02:01:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:47 Get A/D filter: -9.255963e+061 result=40 02:01:47 Get A/D value=-858993460 result=40 02:01:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:47 Parameters OK 02:01:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:47 Set A/D data flow result=40 02:01:47 Set A/D channel type result=40 02:01:47 Set A/D encoding result=40 02:01:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:47 Set channel filter=0.000000e+000 result=40 02:01:47 Config A/D Result=40 02:01:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:47 Get A/D filter: -9.255963e+061 result=40 02:01:47 Get A/D value=-858993460 result=40 02:01:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:01:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:01:47 Aux= 02:01:47 Message to Camera, serial 101173 queued 02:02:24 Received message from Master: op=PointingHead serial=101186 02:02:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:02:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:02:25 Point started: ret=0 02:02:25 point_skyscan result=0 02:02:25 Check angles 02:02:25 SkyScan query 02:02:26 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.405<-17427 Statuses=0009 0009 02:02:26 Msec=0 True Az=109.02 Ze=-81.405 Az status=0009 Ze status=0009 02:02:26 Check angles 02:02:26 SkyScan query 02:02:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 02:02:27 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 02:02:27 Check angles 02:02:27 SkyScan query 02:02:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 02:02:27 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 02:02:28 Check angles 02:02:28 SkyScan query 02:02:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 02:02:28 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 02:02:28 Check angles 02:02:28 SkyScan query 02:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 02:02:29 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 02:02:29 Check angles 02:02:29 SkyScan query 02:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:02:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:02:30 Message to Master queued w/err=0: serial=101186 error=0 02:02:35 Received message from Master: op=Filter serial=101187 02:02:35 Color wheel filter change from 0 to 0 02:02:35 FLIGetFilterPos err=0 currentPosition=0 02:02:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:02:35 Filter is already there-color wheel unchanged 02:02:35 Received message from Master: op=Shutter serial=101188 02:02:35 Shutter LASER open 02:02:35 Received message from Camera: op=State serial=101190 02:02:35 GetSingleValue result=40 Value=cccccccc 02:02:35 SkyScan query 02:02:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:02:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:36 Parameters OK 02:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:36 Set A/D data flow result=40 02:02:36 Set A/D channel type result=40 02:02:36 Set A/D encoding result=40 02:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:36 Set channel filter=0.000000e+000 result=40 02:02:36 Config A/D Result=40 02:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:36 Get A/D filter: -9.255963e+061 result=40 02:02:36 Get A/D value=-858993460 result=40 02:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:36 Parameters OK 02:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:36 Set A/D data flow result=40 02:02:36 Set A/D channel type result=40 02:02:36 Set A/D encoding result=40 02:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:36 Set channel filter=0.000000e+000 result=40 02:02:36 Config A/D Result=40 02:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:36 Get A/D filter: -9.255963e+061 result=40 02:02:36 Get A/D value=-858993460 result=40 02:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:02:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:02:36 Aux= 02:02:36 Message to Camera, serial 101190 queued 02:02:44 Received message from Master: op=Shutter serial=101200 02:02:44 Shutter LASER close 02:02:45 Received message from Master: op=PointingHead serial=101204 02:02:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:02:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:02:45 Point started: ret=0 02:02:45 point_skyscan result=0 02:02:46 Check angles 02:02:46 SkyScan query 02:02:46 SkyScan query done: ret=0 az=89.625<-5975 ze=156.99<-1534 Statuses=0009 0009 02:02:46 Msec=0 True Az=89.625 Ze=156.99 Az status=0009 Ze status=0009 02:02:46 Check angles 02:02:46 SkyScan query 02:02:47 SkyScan query done: ret=0 az=72.015<-4801 ze=136.02<-2932 Statuses=0009 0009 02:02:47 Msec=750 True Az=72.015 Ze=136.02 Az status=0009 Ze status=0009 02:02:47 Check angles 02:02:47 SkyScan query 02:02:48 SkyScan query done: ret=0 az=54.75<-3650 ze=115.095<-4327 Statuses=0009 0009 02:02:48 Msec=1500 True Az=54.75 Ze=115.095 Az status=0009 Ze status=0009 02:02:48 Check angles 02:02:48 SkyScan query 02:02:48 SkyScan query done: ret=0 az=40.875<-2725 ze=94.095<-5727 Statuses=0009 0009 02:02:48 Msec=2250 True Az=40.875 Ze=94.095 Az status=0009 Ze status=0009 02:02:49 Check angles 02:02:49 SkyScan query 02:02:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 02:02:49 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 02:02:49 Check angles 02:02:49 SkyScan query 02:02:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 02:02:50 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 02:02:50 Check angles 02:02:50 SkyScan query 02:02:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:02:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:02:51 Message to Master queued w/err=0: serial=101204 error=0 02:02:56 Received message from Master: op=Filter serial=101205 02:02:56 Color wheel filter change from 0 to 0 02:02:56 FLIGetFilterPos err=0 currentPosition=0 02:02:56 FLIGetStepsRemaining err=0 RemainingSteps=0 02:02:56 Filter is already there-color wheel unchanged 02:02:56 Received message from Master: op=Shutter serial=101206 02:02:56 Shutter LASER close 02:02:56 Received message from Camera: op=State serial=101208 02:02:56 GetSingleValue result=40 Value=cccccccc 02:02:56 SkyScan query 02:02:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:02:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:57 Parameters OK 02:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:57 Set A/D data flow result=40 02:02:57 Set A/D channel type result=40 02:02:57 Set A/D encoding result=40 02:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:57 Set channel filter=0.000000e+000 result=40 02:02:57 Config A/D Result=40 02:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:57 Get A/D filter: -9.255963e+061 result=40 02:02:57 Get A/D value=-858993460 result=40 02:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:57 Parameters OK 02:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:57 Set A/D data flow result=40 02:02:57 Set A/D channel type result=40 02:02:57 Set A/D encoding result=40 02:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:57 Set channel filter=0.000000e+000 result=40 02:02:57 Config A/D Result=40 02:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:57 Get A/D filter: -9.255963e+061 result=40 02:02:57 Get A/D value=-858993460 result=40 02:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:02:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:02:57 Aux= 02:02:57 Message to Camera, serial 101208 queued 02:03:34 Received message from Master: op=PointingHead serial=101221 02:03:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:03:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:03:34 Point started: ret=0 02:03:34 point_skyscan result=0 02:03:35 Check angles 02:03:35 SkyScan query 02:03:35 SkyScan query done: ret=0 az=40.995<-2733 ze=21.585<-10561 Statuses=0008 0009 02:03:35 Msec=0 True Az=40.995 Ze=21.585 Az status=0008 Ze status=0009 02:03:36 Check angles 02:03:36 SkyScan query 02:03:36 SkyScan query done: ret=0 az=40.995<-2733 ze=0.615<-11959 Statuses=0008 0009 02:03:36 Msec=750 True Az=40.995 Ze=0.615 Az status=0008 Ze status=0009 02:03:36 Check angles 02:03:36 SkyScan query 02:03:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.325<-13355 Statuses=0008 0009 02:03:37 Msec=1500 True Az=40.995 Ze=-20.325 Az status=0008 Ze status=0009 02:03:37 Check angles 02:03:37 SkyScan query 02:03:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 02:03:38 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 02:03:38 Check angles 02:03:38 SkyScan query 02:03:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:03:38 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:03:38 Message to Master queued w/err=0: serial=101221 error=0 02:03:43 Received message from Master: op=Filter serial=101222 02:03:43 Color wheel filter change from 0 to 0 02:03:43 FLIGetFilterPos err=0 currentPosition=0 02:03:43 FLIGetStepsRemaining err=0 RemainingSteps=0 02:03:43 Filter is already there-color wheel unchanged 02:03:44 Received message from Master: op=Shutter serial=101223 02:03:44 Shutter LASER close 02:03:44 Received message from Camera: op=State serial=101225 02:03:44 GetSingleValue result=40 Value=cccccccc 02:03:44 SkyScan query 02:03:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:03:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:44 Parameters OK 02:03:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:44 Set A/D data flow result=40 02:03:44 Set A/D channel type result=40 02:03:44 Set A/D encoding result=40 02:03:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:44 Set channel filter=0.000000e+000 result=40 02:03:44 Config A/D Result=40 02:03:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:44 Get A/D filter: -9.255963e+061 result=40 02:03:44 Get A/D value=-858993460 result=40 02:03:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:44 Parameters OK 02:03:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:44 Set A/D data flow result=40 02:03:44 Set A/D channel type result=40 02:03:44 Set A/D encoding result=40 02:03:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:44 Set channel filter=0.000000e+000 result=40 02:03:44 Config A/D Result=40 02:03:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:44 Get A/D filter: -9.255963e+061 result=40 02:03:44 Get A/D value=-858993460 result=40 02:03:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:03:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:03:44 Aux= 02:03:44 Message to Camera, serial 101225 queued 02:04:21 Received message from Master: op=PointingHead serial=101238 02:04:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:04:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:04:21 Point started: ret=0 02:04:21 point_skyscan result=0 02:04:22 Check angles 02:04:22 SkyScan query 02:04:23 SkyScan query done: ret=0 az=63.75<-4250 ze=-68.1<-16540 Statuses=0009 0009 02:04:23 Msec=0 True Az=63.75 Ze=-68.1 Az status=0009 Ze status=0009 02:04:23 Check angles 02:04:23 SkyScan query 02:04:23 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.475<-17965 Statuses=0009 0009 02:04:23 Msec=750 True Az=81.81 Ze=-89.475 Az status=0009 Ze status=0009 02:04:24 Check angles 02:04:24 SkyScan query 02:04:24 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.43<-19362 Statuses=0009 0009 02:04:24 Msec=1500 True Az=99.225 Ze=-110.43 Az status=0009 Ze status=0009 02:04:24 Check angles 02:04:24 SkyScan query 02:04:25 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.4<-20760 Statuses=0009 0009 02:04:25 Msec=2250 True Az=116.64 Ze=-131.4 Az status=0009 Ze status=0009 02:04:25 Check angles 02:04:25 SkyScan query 02:04:26 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 02:04:26 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 02:04:26 Check angles 02:04:26 SkyScan query 02:04:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:04:26 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:04:26 Message to Master queued w/err=0: serial=101238 error=0 02:04:31 Received message from Master: op=Filter serial=101239 02:04:31 Color wheel filter change from 0 to 0 02:04:31 FLIGetFilterPos err=0 currentPosition=0 02:04:31 FLIGetStepsRemaining err=0 RemainingSteps=0 02:04:31 Filter is already there-color wheel unchanged 02:04:32 Received message from Master: op=Shutter serial=101240 02:04:32 Shutter LASER close 02:04:32 Received message from Camera: op=State serial=101242 02:04:32 GetSingleValue result=40 Value=cccccccc 02:04:32 SkyScan query 02:04:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:04:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:32 Parameters OK 02:04:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:32 Set A/D data flow result=40 02:04:32 Set A/D channel type result=40 02:04:32 Set A/D encoding result=40 02:04:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:32 Set channel filter=0.000000e+000 result=40 02:04:32 Config A/D Result=40 02:04:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:32 Get A/D filter: -9.255963e+061 result=40 02:04:32 Get A/D value=-858993460 result=40 02:04:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:32 Parameters OK 02:04:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:32 Set A/D data flow result=40 02:04:32 Set A/D channel type result=40 02:04:32 Set A/D encoding result=40 02:04:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:32 Set channel filter=0.000000e+000 result=40 02:04:32 Config A/D Result=40 02:04:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:32 Get A/D filter: -9.255963e+061 result=40 02:04:32 Get A/D value=-858993460 result=40 02:04:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:32 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:04:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:04:32 Aux= 02:04:32 Message to Camera, serial 101242 queued 02:05:09 Received message from Master: op=PointingHead serial=101255 02:05:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:05:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:05:09 Point started: ret=0 02:05:09 point_skyscan result=0 02:05:10 Check angles 02:05:10 SkyScan query 02:05:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 02:05:11 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 02:05:11 Check angles 02:05:11 SkyScan query 02:05:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:05:11 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:05:11 Message to Master queued w/err=0: serial=101255 error=0 02:05:16 Received message from Master: op=Filter serial=101256 02:05:16 Color wheel filter change from 0 to 0 02:05:16 FLIGetFilterPos err=0 currentPosition=0 02:05:16 FLIGetStepsRemaining err=0 RemainingSteps=0 02:05:16 Filter is already there-color wheel unchanged 02:05:17 Received message from Master: op=Shutter serial=101257 02:05:17 Shutter LASER open 02:05:17 Received message from Camera: op=State serial=101259 02:05:17 GetSingleValue result=40 Value=cccccccc 02:05:17 SkyScan query 02:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:05:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:17 Parameters OK 02:05:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:17 Set A/D data flow result=40 02:05:17 Set A/D channel type result=40 02:05:17 Set A/D encoding result=40 02:05:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:17 Set channel filter=0.000000e+000 result=40 02:05:17 Config A/D Result=40 02:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:17 Get A/D filter: -9.255963e+061 result=40 02:05:17 Get A/D value=-858993460 result=40 02:05:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:17 Parameters OK 02:05:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:17 Set A/D data flow result=40 02:05:17 Set A/D channel type result=40 02:05:17 Set A/D encoding result=40 02:05:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:17 Set channel filter=0.000000e+000 result=40 02:05:17 Config A/D Result=40 02:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:17 Get A/D filter: -9.255963e+061 result=40 02:05:17 Get A/D value=-858993460 result=40 02:05:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:05:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:05:17 Aux= 02:05:17 Message to Camera, serial 101259 queued 02:05:26 Received message from Master: op=Shutter serial=101269 02:05:26 Shutter LASER close 02:05:26 Received message from Master: op=PointingHead serial=101273 02:05:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:05:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:05:27 Point started: ret=0 02:05:27 point_skyscan result=0 02:05:28 Check angles 02:05:28 SkyScan query 02:05:28 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.535<-21569 Statuses=0009 0009 02:05:28 Msec=0 True Az=135.705 Ze=-143.535 Az status=0009 Ze status=0009 02:05:28 Check angles 02:05:28 SkyScan query 02:05:29 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.58<-20172 Statuses=0009 0009 02:05:29 Msec=750 True Az=153.18 Ze=-122.58 Az status=0009 Ze status=0009 02:05:29 Check angles 02:05:29 SkyScan query 02:05:30 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.67<-18778 Statuses=0009 0009 02:05:30 Msec=1500 True Az=170.775 Ze=-101.67 Az status=0009 Ze status=0009 02:05:30 Check angles 02:05:30 SkyScan query 02:05:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.625<-17375 Statuses=0008 0009 02:05:30 Msec=2250 True Az=176.01 Ze=-80.625 Az status=0008 Ze status=0009 02:05:31 Check angles 02:05:31 SkyScan query 02:05:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.715<-15981 Statuses=0008 0009 02:05:31 Msec=3000 True Az=176.01 Ze=-59.715 Az status=0008 Ze status=0009 02:05:31 Check angles 02:05:31 SkyScan query 02:05:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:05:32 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:05:32 Message to Master queued w/err=0: serial=101273 error=0 02:05:37 Received message from Master: op=Filter serial=101274 02:05:37 Color wheel filter change from 0 to 0 02:05:37 FLIGetFilterPos err=0 currentPosition=0 02:05:37 FLIGetStepsRemaining err=0 RemainingSteps=0 02:05:37 Filter is already there-color wheel unchanged 02:05:37 Received message from Master: op=Shutter serial=101275 02:05:37 Shutter LASER close [UTC 2018-12-13 02:05:37] 02:05:37 Received message from Camera: op=State serial=101277 02:05:37 GetSingleValue result=40 Value=cccccccc 02:05:37 SkyScan query 02:05:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:05:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:38 Parameters OK 02:05:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:38 Set A/D data flow result=40 02:05:38 Set A/D channel type result=40 02:05:38 Set A/D encoding result=40 02:05:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:38 Set channel filter=0.000000e+000 result=40 02:05:38 Config A/D Result=40 02:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:38 Get A/D filter: -9.255963e+061 result=40 02:05:38 Get A/D value=-858993460 result=40 02:05:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:38 Parameters OK 02:05:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:38 Set A/D data flow result=40 02:05:38 Set A/D channel type result=40 02:05:38 Set A/D encoding result=40 02:05:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:38 Set channel filter=0.000000e+000 result=40 02:05:38 Config A/D Result=40 02:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:38 Get A/D filter: -9.255963e+061 result=40 02:05:38 Get A/D value=-858993460 result=40 02:05:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:05:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:05:38 Aux= 02:05:38 Message to Camera, serial 101277 queued 02:06:15 Received message from Master: op=PointingHead serial=101290 02:06:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:06:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:06:15 Point started: ret=0 02:06:15 point_skyscan result=0 02:06:16 Check angles 02:06:16 SkyScan query 02:06:16 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.48<-13432 Statuses=0009 0009 02:06:16 Msec=0 True Az=152.745 Ze=-21.48 Az status=0009 Ze status=0009 02:06:16 Check angles 02:06:16 SkyScan query 02:06:17 SkyScan query done: ret=0 az=134.97<-8998 ze=-0.06<-12004 Statuses=0009 0009 02:06:17 Msec=750 True Az=134.97 Ze=-0.06 Az status=0009 Ze status=0009 02:06:17 Check angles 02:06:17 SkyScan query 02:06:18 SkyScan query done: ret=0 az=117.48<-7832 ze=20.88<-10608 Statuses=0009 0009 02:06:18 Msec=1500 True Az=117.48 Ze=20.88 Az status=0009 Ze status=0009 02:06:18 Check angles 02:06:18 SkyScan query 02:06:19 SkyScan query done: ret=0 az=100.095<-6673 ze=41.865<-9209 Statuses=0009 0009 02:06:19 Msec=2250 True Az=100.095 Ze=41.865 Az status=0009 Ze status=0009 02:06:19 Check angles 02:06:19 SkyScan query 02:06:19 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:06:19 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:06:19 Check angles 02:06:19 SkyScan query 02:06:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:06:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:06:20 Message to Master queued w/err=0: serial=101290 error=0 02:06:25 Received message from Master: op=Filter serial=101291 02:06:25 Color wheel filter change from 0 to 0 02:06:25 FLIGetFilterPos err=0 currentPosition=0 02:06:25 FLIGetStepsRemaining err=0 RemainingSteps=0 02:06:25 Filter is already there-color wheel unchanged 02:06:25 Received message from Master: op=Shutter serial=101292 02:06:25 Shutter LASER close 02:06:25 Received message from Camera: op=State serial=101294 02:06:25 GetSingleValue result=40 Value=cccccccc 02:06:25 SkyScan query 02:06:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:06:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:26 Parameters OK 02:06:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:26 Set A/D data flow result=40 02:06:26 Set A/D channel type result=40 02:06:26 Set A/D encoding result=40 02:06:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:26 Set channel filter=0.000000e+000 result=40 02:06:26 Config A/D Result=40 02:06:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:26 Get A/D filter: -9.255963e+061 result=40 02:06:26 Get A/D value=-858993460 result=40 02:06:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:26 Parameters OK 02:06:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:26 Set A/D data flow result=40 02:06:26 Set A/D channel type result=40 02:06:26 Set A/D encoding result=40 02:06:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:26 Set channel filter=0.000000e+000 result=40 02:06:26 Config A/D Result=40 02:06:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:26 Get A/D filter: -9.255963e+061 result=40 02:06:26 Get A/D value=-858993460 result=40 02:06:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:06:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:06:26 Aux= 02:06:26 Message to Camera, serial 101294 queued 02:07:03 Received message from Master: op=PointingHead serial=101307 02:07:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:07:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:07:03 Point started: ret=0 02:07:03 point_skyscan result=0 02:07:04 Check angles 02:07:04 SkyScan query 02:07:04 SkyScan query done: ret=0 az=85.995<-5733 ze=21.21<-10586 Statuses=0008 0009 02:07:04 Msec=0 True Az=85.995 Ze=21.21 Az status=0008 Ze status=0009 02:07:05 Check angles 02:07:05 SkyScan query 02:07:05 SkyScan query done: ret=0 az=85.995<-5733 ze=0.24<-11984 Statuses=0008 0009 02:07:05 Msec=750 True Az=85.995 Ze=0.24 Az status=0008 Ze status=0009 02:07:05 Check angles 02:07:05 SkyScan query 02:07:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.76<-13384 Statuses=0008 0009 02:07:06 Msec=1500 True Az=85.995 Ze=-20.76 Az status=0008 Ze status=0009 02:07:06 Check angles 02:07:06 SkyScan query 02:07:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.625<-14775 Statuses=0008 0009 02:07:07 Msec=2250 True Az=85.995 Ze=-41.625 Az status=0008 Ze status=0009 02:07:07 Check angles 02:07:07 SkyScan query 02:07:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 02:07:07 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 02:07:07 Message to Master queued w/err=0: serial=101307 error=0 02:07:12 Received message from Master: op=Filter serial=101308 02:07:12 Color wheel filter change from 0 to 0 02:07:12 FLIGetFilterPos err=0 currentPosition=0 02:07:12 FLIGetStepsRemaining err=0 RemainingSteps=0 02:07:12 Filter is already there-color wheel unchanged 02:07:13 Received message from Master: op=Shutter serial=101309 02:07:13 Shutter LASER close 02:07:13 Received message from Camera: op=State serial=101311 02:07:13 GetSingleValue result=40 Value=cccccccc 02:07:13 SkyScan query 02:07:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:07:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:13 Parameters OK 02:07:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:13 Set A/D data flow result=40 02:07:13 Set A/D channel type result=40 02:07:13 Set A/D encoding result=40 02:07:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:13 Set channel filter=0.000000e+000 result=40 02:07:13 Config A/D Result=40 02:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:13 Get A/D filter: -9.255963e+061 result=40 02:07:13 Get A/D value=-858993460 result=40 02:07:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:13 Parameters OK 02:07:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:13 Set A/D data flow result=40 02:07:13 Set A/D channel type result=40 02:07:13 Set A/D encoding result=40 02:07:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:13 Set channel filter=0.000000e+000 result=40 02:07:13 Config A/D Result=40 02:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:13 Get A/D filter: -9.255963e+061 result=40 02:07:13 Get A/D value=-858993460 result=40 02:07:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:07:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:07:13 Aux= 02:07:13 Message to Camera, serial 101311 queued 02:07:50 Received message from Master: op=PointingHead serial=101324 02:07:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:07:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:07:51 Point started: ret=0 02:07:51 point_skyscan result=0 02:07:51 Check angles 02:07:51 SkyScan query 02:07:52 SkyScan query done: ret=0 az=108.78<-7252 ze=-80.985<-17399 Statuses=0009 0009 02:07:52 Msec=0 True Az=108.78 Ze=-80.985 Az status=0009 Ze status=0009 02:07:52 Check angles 02:07:52 SkyScan query 02:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 02:07:53 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 02:07:53 Check angles 02:07:53 SkyScan query 02:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.91<-20194 Statuses=0008 0009 02:07:53 Msec=1500 True Az=112.995 Ze=-122.91 Az status=0008 Ze status=0009 02:07:54 Check angles 02:07:54 SkyScan query 02:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.865<-21591 Statuses=0008 0009 02:07:54 Msec=2250 True Az=112.995 Ze=-143.865 Az status=0008 Ze status=0009 02:07:54 Check angles 02:07:54 SkyScan query 02:07:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.805<-22987 Statuses=0008 0009 02:07:55 Msec=3000 True Az=112.995 Ze=-164.805 Az status=0008 Ze status=0009 02:07:55 Check angles 02:07:55 SkyScan query 02:07:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:07:56 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:07:56 Message to Master queued w/err=0: serial=101324 error=0 02:08:01 Received message from Master: op=Filter serial=101325 02:08:01 Color wheel filter change from 0 to 0 02:08:01 FLIGetFilterPos err=0 currentPosition=0 02:08:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:08:01 Filter is already there-color wheel unchanged 02:08:01 Received message from Master: op=Shutter serial=101326 02:08:01 Shutter LASER open 02:08:01 Received message from Camera: op=State serial=101328 02:08:01 GetSingleValue result=40 Value=cccccccc 02:08:01 SkyScan query 02:08:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:08:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:02 Parameters OK 02:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:02 Set A/D data flow result=40 02:08:02 Set A/D channel type result=40 02:08:02 Set A/D encoding result=40 02:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:02 Set channel filter=0.000000e+000 result=40 02:08:02 Config A/D Result=40 02:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:02 Get A/D filter: -9.255963e+061 result=40 02:08:02 Get A/D value=-858993460 result=40 02:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:02 Parameters OK 02:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:02 Set A/D data flow result=40 02:08:02 Set A/D channel type result=40 02:08:02 Set A/D encoding result=40 02:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:02 Set channel filter=0.000000e+000 result=40 02:08:02 Config A/D Result=40 02:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:02 Get A/D filter: -9.255963e+061 result=40 02:08:02 Get A/D value=-858993460 result=40 02:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:08:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:08:02 Aux= 02:08:02 Message to Camera, serial 101328 queued 02:08:10 Received message from Master: op=Shutter serial=101338 02:08:10 Shutter LASER close 02:08:10 Received message from Master: op=PointingHead serial=101342 02:08:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:08:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:08:11 Point started: ret=0 02:08:11 point_skyscan result=0 02:08:11 Check angles 02:08:11 SkyScan query 02:08:12 SkyScan query done: ret=0 az=89.82<-5988 ze=157.155<-1523 Statuses=0009 0009 02:08:12 Msec=0 True Az=89.82 Ze=157.155 Az status=0009 Ze status=0009 02:08:12 Check angles 02:08:12 SkyScan query 02:08:13 SkyScan query done: ret=0 az=71.94<-4796 ze=135.75<-2950 Statuses=0009 0009 02:08:13 Msec=750 True Az=71.94 Ze=135.75 Az status=0009 Ze status=0009 02:08:13 Check angles 02:08:13 SkyScan query 02:08:14 SkyScan query done: ret=0 az=54.66<-3644 ze=114.78<-4348 Statuses=0009 0009 02:08:14 Msec=1500 True Az=54.66 Ze=114.78 Az status=0009 Ze status=0009 02:08:14 Check angles 02:08:14 SkyScan query 02:08:14 SkyScan query done: ret=0 az=40.89<-2726 ze=93.84<-5744 Statuses=0009 0009 02:08:14 Msec=2250 True Az=40.89 Ze=93.84 Az status=0009 Ze status=0009 02:08:15 Check angles 02:08:15 SkyScan query 02:08:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 02:08:15 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 02:08:15 Check angles 02:08:15 SkyScan query 02:08:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 02:08:16 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 02:08:16 Check angles 02:08:16 SkyScan query 02:08:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:08:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:08:17 Message to Master queued w/err=0: serial=101342 error=0 02:08:22 Received message from Master: op=Filter serial=101343 02:08:22 Color wheel filter change from 0 to 0 02:08:22 FLIGetFilterPos err=0 currentPosition=0 02:08:22 FLIGetStepsRemaining err=0 RemainingSteps=0 02:08:22 Filter is already there-color wheel unchanged 02:08:22 Received message from Master: op=Shutter serial=101344 02:08:22 Shutter LASER close 02:08:22 Received message from Camera: op=State serial=101346 02:08:22 GetSingleValue result=40 Value=cccccccc 02:08:22 SkyScan query 02:08:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:08:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:23 Parameters OK 02:08:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:23 Set A/D data flow result=40 02:08:23 Set A/D channel type result=40 02:08:23 Set A/D encoding result=40 02:08:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:23 Set channel filter=0.000000e+000 result=40 02:08:23 Config A/D Result=40 02:08:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:23 Get A/D filter: -9.255963e+061 result=40 02:08:23 Get A/D value=-858993460 result=40 02:08:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:23 Parameters OK 02:08:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:23 Set A/D data flow result=40 02:08:23 Set A/D channel type result=40 02:08:23 Set A/D encoding result=40 02:08:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:23 Set channel filter=0.000000e+000 result=40 02:08:23 Config A/D Result=40 02:08:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:23 Get A/D filter: -9.255963e+061 result=40 02:08:23 Get A/D value=-858993460 result=40 02:08:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:08:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:08:23 Aux= 02:08:23 Message to Camera, serial 101346 queued 02:08:59 Received message from Master: op=PointingHead serial=101359 02:08:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:08:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:09:00 Point started: ret=0 02:09:00 point_skyscan result=0 02:09:01 Check angles 02:09:01 SkyScan query 02:09:01 SkyScan query done: ret=0 az=40.995<-2733 ze=21.585<-10561 Statuses=0008 0009 02:09:01 Msec=0 True Az=40.995 Ze=21.585 Az status=0008 Ze status=0009 02:09:01 Check angles 02:09:01 SkyScan query 02:09:02 SkyScan query done: ret=0 az=41.01<-2734 ze=0.15<-11990 Statuses=0008 0009 02:09:02 Msec=750 True Az=41.01 Ze=0.15 Az status=0008 Ze status=0009 02:09:02 Check angles 02:09:02 SkyScan query 02:09:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.21<-13414 Statuses=0008 0009 02:09:03 Msec=1500 True Az=40.995 Ze=-21.21 Az status=0008 Ze status=0009 02:09:03 Check angles 02:09:03 SkyScan query 02:09:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 02:09:03 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 02:09:04 Check angles 02:09:04 SkyScan query 02:09:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:09:04 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:09:04 Message to Master queued w/err=0: serial=101359 error=0 02:09:09 Received message from Master: op=Filter serial=101360 02:09:09 Color wheel filter change from 0 to 0 02:09:09 FLIGetFilterPos err=0 currentPosition=0 02:09:09 FLIGetStepsRemaining err=0 RemainingSteps=0 02:09:09 Filter is already there-color wheel unchanged 02:09:09 Received message from Master: op=Shutter serial=101361 02:09:09 Shutter LASER close 02:09:09 Received message from Camera: op=State serial=101363 02:09:09 GetSingleValue result=40 Value=cccccccc 02:09:09 SkyScan query 02:09:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:09:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:10 Parameters OK 02:09:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:10 Set A/D data flow result=40 02:09:10 Set A/D channel type result=40 02:09:10 Set A/D encoding result=40 02:09:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:10 Set channel filter=0.000000e+000 result=40 02:09:10 Config A/D Result=40 02:09:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:10 Get A/D filter: -9.255963e+061 result=40 02:09:10 Get A/D value=-858993460 result=40 02:09:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:10 Parameters OK 02:09:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:10 Set A/D data flow result=40 02:09:10 Set A/D channel type result=40 02:09:10 Set A/D encoding result=40 02:09:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:10 Set channel filter=0.000000e+000 result=40 02:09:10 Config A/D Result=40 02:09:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:10 Get A/D filter: -9.255963e+061 result=40 02:09:10 Get A/D value=-858993460 result=40 02:09:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:09:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:09:10 Aux= 02:09:10 Message to Camera, serial 101363 queued 02:09:47 Received message from Master: op=PointingHead serial=101376 02:09:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:09:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:09:47 Point started: ret=0 02:09:47 point_skyscan result=0 02:09:48 Check angles 02:09:48 SkyScan query 02:09:48 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.1<-16540 Statuses=0009 0009 02:09:48 Msec=0 True Az=63.78 Ze=-68.1 Az status=0009 Ze status=0009 02:09:49 Check angles 02:09:49 SkyScan query 02:09:49 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.055<-17937 Statuses=0009 0009 02:09:49 Msec=750 True Az=81.315 Ze=-89.055 Az status=0009 Ze status=0009 02:09:49 Check angles 02:09:49 SkyScan query 02:09:50 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.535<-19369 Statuses=0009 0009 02:09:50 Msec=1500 True Az=99.195 Ze=-110.535 Az status=0009 Ze status=0009 02:09:50 Check angles 02:09:50 SkyScan query 02:09:51 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.4<-20760 Statuses=0009 0009 02:09:51 Msec=2250 True Az=116.7 Ze=-131.4 Az status=0009 Ze status=0009 02:09:51 Check angles 02:09:51 SkyScan query 02:09:51 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 02:09:51 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 02:09:52 Check angles 02:09:52 SkyScan query 02:09:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:09:52 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:09:52 Message to Master queued w/err=0: serial=101376 error=0 02:09:57 Received message from Master: op=Filter serial=101377 02:09:57 Color wheel filter change from 0 to 0 02:09:57 FLIGetFilterPos err=0 currentPosition=0 02:09:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:09:57 Filter is already there-color wheel unchanged 02:09:57 Received message from Master: op=Shutter serial=101378 02:09:57 Shutter LASER close 02:09:57 Received message from Camera: op=State serial=101380 02:09:57 GetSingleValue result=40 Value=cccccccc 02:09:57 SkyScan query 02:09:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:09:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:58 Parameters OK 02:09:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:58 Set A/D data flow result=40 02:09:58 Set A/D channel type result=40 02:09:58 Set A/D encoding result=40 02:09:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:58 Set channel filter=0.000000e+000 result=40 02:09:58 Config A/D Result=40 02:09:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:58 Get A/D filter: -9.255963e+061 result=40 02:09:58 Get A/D value=-858993460 result=40 02:09:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:58 Parameters OK 02:09:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:58 Set A/D data flow result=40 02:09:58 Set A/D channel type result=40 02:09:58 Set A/D encoding result=40 02:09:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:58 Set channel filter=0.000000e+000 result=40 02:09:58 Config A/D Result=40 02:09:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:58 Get A/D filter: -9.255963e+061 result=40 02:09:58 Get A/D value=-858993460 result=40 02:09:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:09:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:09:58 Aux= 02:09:58 Message to Camera, serial 101380 queued 02:10:35 Received message from Master: op=PointingHead serial=101393 02:10:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:10:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:10:35 Point started: ret=0 02:10:35 point_skyscan result=0 02:10:36 Check angles 02:10:36 SkyScan query 02:10:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 02:10:37 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 02:10:37 Check angles 02:10:37 SkyScan query 02:10:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:10:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:10:37 Message to Master queued w/err=0: serial=101393 error=0 02:10:42 Received message from Master: op=Filter serial=101394 02:10:42 Color wheel filter change from 0 to 0 02:10:42 FLIGetFilterPos err=0 currentPosition=0 02:10:42 FLIGetStepsRemaining err=0 RemainingSteps=0 02:10:42 Filter is already there-color wheel unchanged 02:10:42 Received message from Master: op=Shutter serial=101395 02:10:42 Shutter LASER open 02:10:43 Received message from Camera: op=State serial=101397 02:10:43 GetSingleValue result=40 Value=cccccccc 02:10:43 SkyScan query 02:10:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:10:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:43 Parameters OK 02:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:43 Set A/D data flow result=40 02:10:43 Set A/D channel type result=40 02:10:43 Set A/D encoding result=40 02:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:43 Set channel filter=0.000000e+000 result=40 02:10:43 Config A/D Result=40 02:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:43 Get A/D filter: -9.255963e+061 result=40 02:10:43 Get A/D value=-858993460 result=40 02:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:43 Parameters OK 02:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:43 Set A/D data flow result=40 02:10:43 Set A/D channel type result=40 02:10:43 Set A/D encoding result=40 02:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:43 Set channel filter=0.000000e+000 result=40 02:10:43 Config A/D Result=40 02:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:43 Get A/D filter: -9.255963e+061 result=40 02:10:43 Get A/D value=-858993460 result=40 02:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:10:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:10:43 Aux= 02:10:43 Message to Camera, serial 101397 queued 02:10:52 Received message from Master: op=Shutter serial=101407 02:10:52 Shutter LASER close 02:10:52 Received message from Master: op=PointingHead serial=101411 02:10:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:10:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:10:53 Point started: ret=0 02:10:53 point_skyscan result=0 02:10:53 Check angles 02:10:53 SkyScan query 02:10:54 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.07<-21538 Statuses=0009 0009 02:10:54 Msec=0 True Az=135.96 Ze=-143.07 Az status=0009 Ze status=0009 02:10:54 Check angles 02:10:54 SkyScan query 02:10:55 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.205<-20147 Statuses=0009 0009 02:10:55 Msec=750 True Az=153.45 Ze=-122.205 Az status=0009 Ze status=0009 02:10:55 Check angles 02:10:55 SkyScan query 02:10:55 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.31<-18754 Statuses=0009 0009 02:10:55 Msec=1500 True Az=171.015 Ze=-101.31 Az status=0009 Ze status=0009 02:10:56 Check angles 02:10:56 SkyScan query 02:10:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.34<-17356 Statuses=0008 0009 02:10:56 Msec=2250 True Az=176.01 Ze=-80.34 Az status=0008 Ze status=0009 02:10:56 Check angles 02:10:56 SkyScan query 02:10:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.385<-15959 Statuses=0008 0009 02:10:57 Msec=3000 True Az=176.01 Ze=-59.385 Az status=0008 Ze status=0009 02:10:57 Check angles 02:10:57 SkyScan query 02:10:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:10:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:10:58 Message to Master queued w/err=0: serial=101411 error=0 02:11:03 Received message from Master: op=Filter serial=101412 02:11:03 Color wheel filter change from 0 to 0 02:11:03 FLIGetFilterPos err=0 currentPosition=0 02:11:03 FLIGetStepsRemaining err=0 RemainingSteps=0 02:11:03 Filter is already there-color wheel unchanged 02:11:03 Received message from Master: op=Shutter serial=101413 02:11:03 Shutter LASER close 02:11:03 Received message from Camera: op=State serial=101415 02:11:03 GetSingleValue result=40 Value=cccccccc 02:11:03 SkyScan query 02:11:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:11:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:04 Parameters OK 02:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:04 Set A/D data flow result=40 02:11:04 Set A/D channel type result=40 02:11:04 Set A/D encoding result=40 02:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:04 Set channel filter=0.000000e+000 result=40 02:11:04 Config A/D Result=40 02:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:04 Get A/D filter: -9.255963e+061 result=40 02:11:04 Get A/D value=-858993460 result=40 02:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:04 Parameters OK 02:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:04 Set A/D data flow result=40 02:11:04 Set A/D channel type result=40 02:11:04 Set A/D encoding result=40 02:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:04 Set channel filter=0.000000e+000 result=40 02:11:04 Config A/D Result=40 02:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:04 Get A/D filter: -9.255963e+061 result=40 02:11:04 Get A/D value=-858993460 result=40 02:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:11:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:11:04 Aux= 02:11:04 Message to Camera, serial 101415 queued 02:11:40 Received message from Master: op=PointingHead serial=101428 02:11:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:11:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:11:41 Point started: ret=0 02:11:41 point_skyscan result=0 02:11:42 Check angles 02:11:42 SkyScan query 02:11:42 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.81<-13454 Statuses=0009 0009 02:11:42 Msec=0 True Az=152.94 Ze=-21.81 Az status=0009 Ze status=0009 02:11:42 Check angles 02:11:42 SkyScan query 02:11:43 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.36<-12024 Statuses=0009 0009 02:11:43 Msec=750 True Az=135.135 Ze=-0.36 Az status=0009 Ze status=0009 02:11:43 Check angles 02:11:43 SkyScan query 02:11:44 SkyScan query done: ret=0 az=117.315<-7821 ze=21.045<-10597 Statuses=0009 0009 02:11:44 Msec=1500 True Az=117.315 Ze=21.045 Az status=0009 Ze status=0009 02:11:44 Check angles 02:11:44 SkyScan query 02:11:44 SkyScan query done: ret=0 az=99.96<-6664 ze=41.985<-9201 Statuses=0009 0009 02:11:44 Msec=2250 True Az=99.96 Ze=41.985 Az status=0009 Ze status=0009 02:11:45 Check angles 02:11:45 SkyScan query 02:11:45 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 02:11:45 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 02:11:45 Check angles 02:11:45 SkyScan query 02:11:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:11:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:11:46 Message to Master queued w/err=0: serial=101428 error=0 02:11:51 Received message from Master: op=Filter serial=101429 02:11:51 Color wheel filter change from 0 to 0 02:11:51 FLIGetFilterPos err=0 currentPosition=0 02:11:51 FLIGetStepsRemaining err=0 RemainingSteps=0 02:11:51 Filter is already there-color wheel unchanged 02:11:51 Received message from Master: op=Shutter serial=101430 02:11:51 Shutter LASER close 02:11:51 Received message from Camera: op=State serial=101432 02:11:51 GetSingleValue result=40 Value=cccccccc 02:11:51 SkyScan query 02:11:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:11:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:52 Parameters OK 02:11:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:52 Set A/D data flow result=40 02:11:52 Set A/D channel type result=40 02:11:52 Set A/D encoding result=40 02:11:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:52 Set channel filter=0.000000e+000 result=40 02:11:52 Config A/D Result=40 02:11:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:52 Get A/D filter: -9.255963e+061 result=40 02:11:52 Get A/D value=-858993460 result=40 02:11:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:52 Parameters OK 02:11:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:52 Set A/D data flow result=40 02:11:52 Set A/D channel type result=40 02:11:52 Set A/D encoding result=40 02:11:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:52 Set channel filter=0.000000e+000 result=40 02:11:52 Config A/D Result=40 02:11:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:52 Get A/D filter: -9.255963e+061 result=40 02:11:52 Get A/D value=-858993460 result=40 02:11:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:11:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:11:52 Aux= 02:11:52 Message to Camera, serial 101432 queued 02:12:29 Received message from Master: op=PointingHead serial=101445 02:12:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:12:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:12:29 Point started: ret=0 02:12:29 point_skyscan result=0 02:12:30 Check angles 02:12:30 SkyScan query 02:12:30 SkyScan query done: ret=0 az=85.995<-5733 ze=21.525<-10565 Statuses=0008 0009 02:12:30 Msec=0 True Az=85.995 Ze=21.525 Az status=0008 Ze status=0009 02:12:31 Check angles 02:12:31 SkyScan query 02:12:31 SkyScan query done: ret=0 az=85.995<-5733 ze=0.57<-11962 Statuses=0008 0009 02:12:31 Msec=750 True Az=85.995 Ze=0.57 Az status=0008 Ze status=0009 02:12:31 Check angles 02:12:31 SkyScan query 02:12:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.4<-13360 Statuses=0008 0009 02:12:32 Msec=1500 True Az=85.995 Ze=-20.4 Az status=0008 Ze status=0009 02:12:32 Check angles 02:12:32 SkyScan query 02:12:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.31<-14754 Statuses=0008 0009 02:12:33 Msec=2250 True Az=85.995 Ze=-41.31 Az status=0008 Ze status=0009 02:12:33 Check angles 02:12:33 SkyScan query 02:12:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:12:33 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:12:33 Message to Master queued w/err=0: serial=101445 error=0 02:12:38 Received message from Master: op=Filter serial=101446 02:12:38 Color wheel filter change from 0 to 0 02:12:38 FLIGetFilterPos err=0 currentPosition=0 02:12:38 FLIGetStepsRemaining err=0 RemainingSteps=0 02:12:38 Filter is already there-color wheel unchanged 02:12:39 Received message from Master: op=Shutter serial=101447 02:12:39 Shutter LASER close 02:12:39 Received message from Camera: op=State serial=101449 02:12:39 GetSingleValue result=40 Value=cccccccc 02:12:39 SkyScan query 02:12:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:12:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:39 Parameters OK 02:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:39 Set A/D data flow result=40 02:12:39 Set A/D channel type result=40 02:12:39 Set A/D encoding result=40 02:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:39 Set channel filter=0.000000e+000 result=40 02:12:39 Config A/D Result=40 02:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:39 Get A/D filter: -9.255963e+061 result=40 02:12:39 Get A/D value=-858993460 result=40 02:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:39 Parameters OK 02:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:39 Set A/D data flow result=40 02:12:39 Set A/D channel type result=40 02:12:39 Set A/D encoding result=40 02:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:39 Set channel filter=0.000000e+000 result=40 02:12:39 Config A/D Result=40 02:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:39 Get A/D filter: -9.255963e+061 result=40 02:12:39 Get A/D value=-858993460 result=40 02:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:12:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:12:39 Aux= 02:12:39 Message to Camera, serial 101449 queued 02:13:16 Received message from Master: op=PointingHead serial=101462 02:13:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:13:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:13:16 Point started: ret=0 02:13:16 point_skyscan result=0 02:13:17 Check angles 02:13:17 SkyScan query 02:13:18 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.075<-17405 Statuses=0009 0009 02:13:18 Msec=0 True Az=108.81 Ze=-81.075 Az status=0009 Ze status=0009 02:13:18 Check angles 02:13:18 SkyScan query 02:13:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 02:13:18 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 02:13:19 Check angles 02:13:19 SkyScan query 02:13:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 02:13:19 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 02:13:19 Check angles 02:13:19 SkyScan query 02:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 02:13:20 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 02:13:20 Check angles 02:13:20 SkyScan query 02:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.315<-23021 Statuses=0008 0009 02:13:21 Msec=3000 True Az=112.995 Ze=-165.315 Az status=0008 Ze status=0009 02:13:21 Check angles 02:13:21 SkyScan query 02:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:13:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:13:21 Message to Master queued w/err=0: serial=101462 error=0 02:13:26 Received message from Master: op=Filter serial=101463 02:13:26 Color wheel filter change from 0 to 0 02:13:26 FLIGetFilterPos err=0 currentPosition=0 02:13:26 FLIGetStepsRemaining err=0 RemainingSteps=0 02:13:26 Filter is already there-color wheel unchanged 02:13:27 Received message from Master: op=Shutter serial=101464 02:13:27 Shutter LASER open 02:13:27 Received message from Camera: op=State serial=101466 02:13:27 GetSingleValue result=40 Value=cccccccc 02:13:27 SkyScan query 02:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:13:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:27 Parameters OK 02:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:27 Set A/D data flow result=40 02:13:27 Set A/D channel type result=40 02:13:27 Set A/D encoding result=40 02:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:27 Set channel filter=0.000000e+000 result=40 02:13:27 Config A/D Result=40 02:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:27 Get A/D filter: -9.255963e+061 result=40 02:13:27 Get A/D value=-858993460 result=40 02:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:27 Parameters OK 02:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:27 Set A/D data flow result=40 02:13:27 Set A/D channel type result=40 02:13:27 Set A/D encoding result=40 02:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:27 Set channel filter=0.000000e+000 result=40 02:13:27 Config A/D Result=40 02:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:27 Get A/D filter: -9.255963e+061 result=40 02:13:27 Get A/D value=-858993460 result=40 02:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:13:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:13:27 Aux= 02:13:27 Message to Camera, serial 101466 queued 02:13:36 Received message from Master: op=Shutter serial=101476 02:13:36 Shutter LASER close 02:13:36 Received message from Master: op=PointingHead serial=101480 02:13:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:13:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:13:37 Point started: ret=0 02:13:37 point_skyscan result=0 02:13:37 Check angles 02:13:37 SkyScan query 02:13:38 SkyScan query done: ret=0 az=89.61<-5974 ze=156.81<-1546 Statuses=0009 0009 02:13:38 Msec=0 True Az=89.61 Ze=156.81 Az status=0009 Ze status=0009 02:13:38 Check angles 02:13:38 SkyScan query 02:13:39 SkyScan query done: ret=0 az=72.06<-4804 ze=135.96<-2936 Statuses=0009 0009 02:13:39 Msec=750 True Az=72.06 Ze=135.96 Az status=0009 Ze status=0009 02:13:39 Check angles 02:13:39 SkyScan query 02:13:39 SkyScan query done: ret=0 az=54.78<-3652 ze=115.005<-4333 Statuses=0009 0009 02:13:39 Msec=1500 True Az=54.78 Ze=115.005 Az status=0009 Ze status=0009 02:13:40 Check angles 02:13:40 SkyScan query 02:13:40 SkyScan query done: ret=0 az=40.875<-2725 ze=94.035<-5731 Statuses=0009 0009 02:13:40 Msec=2250 True Az=40.875 Ze=94.035 Az status=0009 Ze status=0009 02:13:40 Check angles 02:13:40 SkyScan query 02:13:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 02:13:41 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 02:13:41 Check angles 02:13:41 SkyScan query 02:13:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 02:13:42 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 02:13:42 Check angles 02:13:42 SkyScan query 02:13:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:13:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:13:42 Message to Master queued w/err=0: serial=101480 error=0 02:13:47 Received message from Master: op=Filter serial=101481 02:13:47 Color wheel filter change from 0 to 0 02:13:47 FLIGetFilterPos err=0 currentPosition=0 02:13:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:13:47 Filter is already there-color wheel unchanged 02:13:48 Received message from Master: op=Shutter serial=101482 02:13:48 Shutter LASER close 02:13:48 Received message from Camera: op=State serial=101484 02:13:48 GetSingleValue result=40 Value=cccccccc 02:13:48 SkyScan query 02:13:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:13:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:48 Parameters OK 02:13:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:48 Set A/D data flow result=40 02:13:48 Set A/D channel type result=40 02:13:48 Set A/D encoding result=40 02:13:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:48 Set channel filter=0.000000e+000 result=40 02:13:48 Config A/D Result=40 02:13:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:48 Get A/D filter: -9.255963e+061 result=40 02:13:48 Get A/D value=-858993460 result=40 02:13:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:48 Parameters OK 02:13:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:48 Set A/D data flow result=40 02:13:48 Set A/D channel type result=40 02:13:48 Set A/D encoding result=40 02:13:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:48 Set channel filter=0.000000e+000 result=40 02:13:48 Config A/D Result=40 02:13:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:48 Get A/D filter: -9.255963e+061 result=40 02:13:48 Get A/D value=-858993460 result=40 02:13:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:13:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:13:48 Aux= 02:13:48 Message to Camera, serial 101484 queued 02:14:25 Received message from Master: op=PointingHead serial=101497 02:14:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:14:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:14:26 Point started: ret=0 02:14:26 point_skyscan result=0 02:14:26 Check angles 02:14:26 SkyScan query 02:14:27 SkyScan query done: ret=0 az=40.995<-2733 ze=21.465<-10569 Statuses=0008 0009 02:14:27 Msec=0 True Az=40.995 Ze=21.465 Az status=0008 Ze status=0009 02:14:27 Check angles 02:14:27 SkyScan query 02:14:28 SkyScan query done: ret=0 az=40.995<-2733 ze=0.555<-11963 Statuses=0008 0009 02:14:28 Msec=750 True Az=40.995 Ze=0.555 Az status=0008 Ze status=0009 02:14:28 Check angles 02:14:28 SkyScan query 02:14:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.4<-13360 Statuses=0008 0009 02:14:28 Msec=1500 True Az=40.995 Ze=-20.4 Az status=0008 Ze status=0009 02:14:29 Check angles 02:14:29 SkyScan query 02:14:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 02:14:29 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 02:14:29 Check angles 02:14:29 SkyScan query 02:14:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:14:30 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:14:30 Message to Master queued w/err=0: serial=101497 error=0 02:14:35 Received message from Master: op=Filter serial=101498 02:14:35 Color wheel filter change from 0 to 0 02:14:35 FLIGetFilterPos err=0 currentPosition=0 02:14:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:14:35 Filter is already there-color wheel unchanged 02:14:35 Received message from Master: op=Shutter serial=101499 02:14:35 Shutter LASER close 02:14:35 Received message from Camera: op=State serial=101501 02:14:35 GetSingleValue result=40 Value=cccccccc 02:14:35 SkyScan query 02:14:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:14:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:36 Parameters OK 02:14:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:36 Set A/D data flow result=40 02:14:36 Set A/D channel type result=40 02:14:36 Set A/D encoding result=40 02:14:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:36 Set channel filter=0.000000e+000 result=40 02:14:36 Config A/D Result=40 02:14:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:36 Get A/D filter: -9.255963e+061 result=40 02:14:36 Get A/D value=-858993460 result=40 02:14:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:36 Parameters OK 02:14:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:36 Set A/D data flow result=40 02:14:36 Set A/D channel type result=40 02:14:36 Set A/D encoding result=40 02:14:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:36 Set channel filter=0.000000e+000 result=40 02:14:36 Config A/D Result=40 02:14:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:36 Get A/D filter: -9.255963e+061 result=40 02:14:36 Get A/D value=-858993460 result=40 02:14:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:14:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:14:36 Aux= 02:14:36 Message to Camera, serial 101501 queued 02:15:13 Received message from Master: op=PointingHead serial=101514 02:15:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:15:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:15:13 Point started: ret=0 02:15:13 point_skyscan result=0 02:15:14 Check angles 02:15:14 SkyScan query 02:15:14 SkyScan query done: ret=0 az=64.365<-4291 ze=-68.82<-16588 Statuses=0009 0009 02:15:14 Msec=0 True Az=64.365 Ze=-68.82 Az status=0009 Ze status=0009 02:15:15 Check angles 02:15:15 SkyScan query 02:15:15 SkyScan query done: ret=0 az=82.38<-5492 ze=-90.21<-18014 Statuses=0009 0009 02:15:15 Msec=750 True Az=82.38 Ze=-90.21 Az status=0009 Ze status=0009 02:15:15 Check angles 02:15:15 SkyScan query 02:15:16 SkyScan query done: ret=0 az=99.78<-6652 ze=-111.165<-19411 Statuses=0009 0009 02:15:16 Msec=1500 True Az=99.78 Ze=-111.165 Az status=0009 Ze status=0009 02:15:16 Check angles 02:15:16 SkyScan query 02:15:17 SkyScan query done: ret=0 az=117.255<-7817 ze=-132.09<-20806 Statuses=0009 0009 02:15:17 Msec=2250 True Az=117.255 Ze=-132.09 Az status=0009 Ze status=0009 02:15:17 Check angles 02:15:17 SkyScan query 02:15:17 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 02:15:17 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 02:15:18 Check angles 02:15:18 SkyScan query 02:15:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:15:18 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:15:18 Message to Master queued w/err=0: serial=101514 error=0 02:15:23 Received message from Master: op=Filter serial=101515 02:15:23 Color wheel filter change from 0 to 0 02:15:23 FLIGetFilterPos err=0 currentPosition=0 02:15:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:15:23 Filter is already there-color wheel unchanged 02:15:23 Received message from Master: op=Shutter serial=101516 02:15:23 Shutter LASER close 02:15:23 Received message from Camera: op=State serial=101518 02:15:23 GetSingleValue result=40 Value=cccccccc 02:15:23 SkyScan query 02:15:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:15:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:24 Parameters OK 02:15:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:24 Set A/D data flow result=40 02:15:24 Set A/D channel type result=40 02:15:24 Set A/D encoding result=40 02:15:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:24 Set channel filter=0.000000e+000 result=40 02:15:24 Config A/D Result=40 02:15:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:24 Get A/D filter: -9.255963e+061 result=40 02:15:24 Get A/D value=-858993460 result=40 02:15:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:24 Parameters OK 02:15:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:24 Set A/D data flow result=40 02:15:24 Set A/D channel type result=40 02:15:24 Set A/D encoding result=40 [UTC 2018-12-13 02:15:24] 02:15:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:24 Set channel filter=0.000000e+000 result=40 02:15:24 Config A/D Result=40 02:15:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:24 Get A/D filter: -9.255963e+061 result=40 02:15:24 Get A/D value=-858993460 result=40 02:15:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:15:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:15:24 Aux= 02:15:24 Message to Camera, serial 101518 queued 02:15:27 Received message from Master: op=Identify serial=101519 [UTC 2018-12-13 02:15:53] 02:16:01 Received message from Master: op=PointingHead serial=101534 02:16:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:16:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:16:01 Point started: ret=0 02:16:01 point_skyscan result=0 02:16:02 Check angles 02:16:02 SkyScan query 02:16:02 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 02:16:02 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 02:16:03 Check angles 02:16:03 SkyScan query 02:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:16:03 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:16:03 Message to Master queued w/err=0: serial=101534 error=0 02:16:08 Received message from Master: op=Filter serial=101535 02:16:08 Color wheel filter change from 0 to 0 02:16:08 FLIGetFilterPos err=0 currentPosition=0 02:16:08 FLIGetStepsRemaining err=0 RemainingSteps=0 02:16:08 Filter is already there-color wheel unchanged 02:16:08 Received message from Master: op=Shutter serial=101536 02:16:08 Shutter LASER open 02:16:08 Received message from Camera: op=State serial=101538 02:16:08 GetSingleValue result=40 Value=cccccccc 02:16:08 SkyScan query 02:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:16:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:09 Parameters OK 02:16:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:09 Set A/D data flow result=40 02:16:09 Set A/D channel type result=40 02:16:09 Set A/D encoding result=40 02:16:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:09 Set channel filter=0.000000e+000 result=40 02:16:09 Config A/D Result=40 02:16:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:09 Get A/D filter: -9.255963e+061 result=40 02:16:09 Get A/D value=-858993460 result=40 02:16:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:09 Parameters OK 02:16:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:09 Set A/D data flow result=40 02:16:09 Set A/D channel type result=40 02:16:09 Set A/D encoding result=40 02:16:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:09 Set channel filter=0.000000e+000 result=40 02:16:09 Config A/D Result=40 02:16:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:09 Get A/D filter: -9.255963e+061 result=40 02:16:09 Get A/D value=-858993460 result=40 02:16:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:16:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:16:09 Aux= 02:16:09 Message to Camera, serial 101538 queued 02:16:18 Received message from Master: op=Shutter serial=101548 02:16:18 Shutter LASER close 02:16:18 Received message from Master: op=PointingHead serial=101552 02:16:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:16:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:16:18 Point started: ret=0 02:16:18 point_skyscan result=0 02:16:19 Check angles 02:16:19 SkyScan query 02:16:20 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.565<-21571 Statuses=0009 0009 02:16:20 Msec=0 True Az=135.705 Ze=-143.565 Az status=0009 Ze status=0009 02:16:20 Check angles 02:16:20 SkyScan query 02:16:21 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.625<-20175 Statuses=0009 0009 02:16:21 Msec=750 True Az=153.18 Ze=-122.625 Az status=0009 Ze status=0009 02:16:21 Check angles 02:16:21 SkyScan query 02:16:21 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.685<-18779 Statuses=0009 0009 02:16:21 Msec=1500 True Az=170.745 Ze=-101.685 Az status=0009 Ze status=0009 02:16:21 Check angles 02:16:21 SkyScan query 02:16:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.28<-17352 Statuses=0008 0009 02:16:22 Msec=2250 True Az=176.01 Ze=-80.28 Az status=0008 Ze status=0009 02:16:22 Check angles 02:16:22 SkyScan query 02:16:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.31<-15954 Statuses=0008 0009 02:16:23 Msec=3000 True Az=176.01 Ze=-59.31 Az status=0008 Ze status=0009 02:16:23 Check angles 02:16:23 SkyScan query 02:16:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:16:24 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:16:24 Message to Master queued w/err=0: serial=101552 error=0 02:16:29 Received message from Master: op=Filter serial=101553 02:16:29 Color wheel filter change from 0 to 0 02:16:29 FLIGetFilterPos err=0 currentPosition=0 02:16:29 FLIGetStepsRemaining err=0 RemainingSteps=0 02:16:29 Filter is already there-color wheel unchanged 02:16:29 Received message from Master: op=Shutter serial=101554 02:16:29 Shutter LASER close 02:16:29 Received message from Camera: op=State serial=101556 02:16:29 GetSingleValue result=40 Value=cccccccc 02:16:29 SkyScan query 02:16:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:16:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:29 Parameters OK 02:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:29 Set A/D data flow result=40 02:16:29 Set A/D channel type result=40 02:16:29 Set A/D encoding result=40 02:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:29 Set channel filter=0.000000e+000 result=40 02:16:29 Config A/D Result=40 02:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:29 Get A/D filter: -9.255963e+061 result=40 02:16:29 Get A/D value=-858993460 result=40 02:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:29 Parameters OK 02:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:29 Set A/D data flow result=40 02:16:29 Set A/D channel type result=40 02:16:29 Set A/D encoding result=40 02:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:29 Set channel filter=0.000000e+000 result=40 02:16:29 Config A/D Result=40 02:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:29 Get A/D filter: -9.255963e+061 result=40 02:16:29 Get A/D value=-858993460 result=40 02:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:16:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:16:29 Aux= 02:16:29 Message to Camera, serial 101556 queued 02:17:06 Received message from Master: op=PointingHead serial=101569 02:17:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:17:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:17:07 Point started: ret=0 02:17:07 point_skyscan result=0 02:17:07 Check angles 02:17:07 SkyScan query 02:17:08 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.54<-13436 Statuses=0009 0009 02:17:08 Msec=0 True Az=152.76 Ze=-21.54 Az status=0009 Ze status=0009 02:17:08 Check angles 02:17:08 SkyScan query 02:17:09 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.54<-12036 Statuses=0009 0009 02:17:09 Msec=750 True Az=135.345 Ze=-0.54 Az status=0009 Ze status=0009 02:17:09 Check angles 02:17:09 SkyScan query 02:17:10 SkyScan query done: ret=0 az=117.48<-7832 ze=20.82<-10612 Statuses=0009 0009 02:17:10 Msec=1500 True Az=117.48 Ze=20.82 Az status=0009 Ze status=0009 02:17:10 Check angles 02:17:10 SkyScan query 02:17:10 SkyScan query done: ret=0 az=100.08<-6672 ze=41.79<-9214 Statuses=0009 0009 02:17:10 Msec=2250 True Az=100.08 Ze=41.79 Az status=0009 Ze status=0009 02:17:10 Check angles 02:17:10 SkyScan query 02:17:11 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 02:17:11 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 02:17:11 Check angles 02:17:11 SkyScan query 02:17:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:17:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:17:12 Message to Master queued w/err=0: serial=101569 error=0 02:17:17 Received message from Master: op=Filter serial=101570 02:17:17 Color wheel filter change from 0 to 0 02:17:17 FLIGetFilterPos err=0 currentPosition=0 02:17:17 FLIGetStepsRemaining err=0 RemainingSteps=0 02:17:17 Filter is already there-color wheel unchanged 02:17:17 Received message from Master: op=Shutter serial=101571 02:17:17 Shutter LASER close 02:17:17 Received message from Camera: op=State serial=101573 02:17:17 GetSingleValue result=40 Value=cccccccc 02:17:17 SkyScan query 02:17:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:17:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:18 Parameters OK 02:17:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:18 Set A/D data flow result=40 02:17:18 Set A/D channel type result=40 02:17:18 Set A/D encoding result=40 02:17:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:18 Set channel filter=0.000000e+000 result=40 02:17:18 Config A/D Result=40 02:17:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:18 Get A/D filter: -9.255963e+061 result=40 02:17:18 Get A/D value=-858993460 result=40 02:17:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:18 Parameters OK 02:17:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:18 Set A/D data flow result=40 02:17:18 Set A/D channel type result=40 02:17:18 Set A/D encoding result=40 02:17:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:18 Set channel filter=0.000000e+000 result=40 02:17:18 Config A/D Result=40 02:17:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:18 Get A/D filter: -9.255963e+061 result=40 02:17:18 Get A/D value=-858993460 result=40 02:17:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:17:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:17:18 Aux= 02:17:18 Message to Camera, serial 101573 queued 02:17:55 Received message from Master: op=PointingHead serial=101586 02:17:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:17:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:17:55 Point started: ret=0 02:17:55 point_skyscan result=0 02:17:56 Check angles 02:17:56 SkyScan query 02:17:56 SkyScan query done: ret=0 az=85.995<-5733 ze=21.54<-10564 Statuses=0008 0009 02:17:56 Msec=0 True Az=85.995 Ze=21.54 Az status=0008 Ze status=0009 02:17:56 Check angles 02:17:56 SkyScan query 02:17:57 SkyScan query done: ret=0 az=85.995<-5733 ze=0.51<-11966 Statuses=0008 0009 02:17:57 Msec=750 True Az=85.995 Ze=0.51 Az status=0008 Ze status=0009 02:17:57 Check angles 02:17:57 SkyScan query 02:17:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.4<-13360 Statuses=0008 0009 02:17:58 Msec=1500 True Az=85.995 Ze=-20.4 Az status=0008 Ze status=0009 02:17:58 Check angles 02:17:58 SkyScan query 02:17:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.325<-14755 Statuses=0008 0009 02:17:58 Msec=2250 True Az=85.995 Ze=-41.325 Az status=0008 Ze status=0009 02:17:59 Check angles 02:17:59 SkyScan query 02:17:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:17:59 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:17:59 Message to Master queued w/err=0: serial=101586 error=0 02:18:04 Received message from Master: op=Filter serial=101587 02:18:04 Color wheel filter change from 0 to 0 02:18:04 FLIGetFilterPos err=0 currentPosition=0 02:18:04 FLIGetStepsRemaining err=0 RemainingSteps=0 02:18:04 Filter is already there-color wheel unchanged 02:18:04 Received message from Master: op=Shutter serial=101588 02:18:04 Shutter LASER close 02:18:04 Received message from Camera: op=State serial=101590 02:18:04 GetSingleValue result=40 Value=cccccccc 02:18:04 SkyScan query 02:18:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:18:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:05 Parameters OK 02:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:05 Set A/D data flow result=40 02:18:05 Set A/D channel type result=40 02:18:05 Set A/D encoding result=40 02:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:05 Set channel filter=0.000000e+000 result=40 02:18:05 Config A/D Result=40 02:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:05 Get A/D filter: -9.255963e+061 result=40 02:18:05 Get A/D value=-858993460 result=40 02:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:05 Parameters OK 02:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:05 Set A/D data flow result=40 02:18:05 Set A/D channel type result=40 02:18:05 Set A/D encoding result=40 02:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:05 Set channel filter=0.000000e+000 result=40 02:18:05 Config A/D Result=40 02:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:05 Get A/D filter: -9.255963e+061 result=40 02:18:05 Get A/D value=-858993460 result=40 02:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:18:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:18:05 Aux= 02:18:05 Message to Camera, serial 101590 queued 02:18:42 Received message from Master: op=PointingHead serial=101603 02:18:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:18:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:18:42 Point started: ret=0 02:18:42 point_skyscan result=0 02:18:43 Check angles 02:18:43 SkyScan query 02:18:44 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.405<-17427 Statuses=0009 0009 02:18:44 Msec=0 True Az=109.14 Ze=-81.405 Az status=0009 Ze status=0009 02:18:44 Check angles 02:18:44 SkyScan query 02:18:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 02:18:44 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 02:18:44 Check angles 02:18:44 SkyScan query 02:18:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.185<-20279 Statuses=0008 0009 02:18:45 Msec=1500 True Az=112.995 Ze=-124.185 Az status=0008 Ze status=0009 02:18:45 Check angles 02:18:45 SkyScan query 02:18:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.125<-21675 Statuses=0008 0009 02:18:46 Msec=2250 True Az=112.995 Ze=-145.125 Az status=0008 Ze status=0009 02:18:46 Check angles 02:18:46 SkyScan query 02:18:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.065<-23071 Statuses=0008 0009 02:18:47 Msec=3000 True Az=112.995 Ze=-166.065 Az status=0008 Ze status=0009 02:18:47 Check angles 02:18:47 SkyScan query 02:18:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:18:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:18:47 Message to Master queued w/err=0: serial=101603 error=0 02:18:52 Received message from Master: op=Filter serial=101604 02:18:52 Color wheel filter change from 0 to 0 02:18:52 FLIGetFilterPos err=0 currentPosition=0 02:18:52 FLIGetStepsRemaining err=0 RemainingSteps=0 02:18:52 Filter is already there-color wheel unchanged 02:18:52 Received message from Master: op=Shutter serial=101605 02:18:52 Shutter LASER open 02:18:53 Received message from Camera: op=State serial=101607 02:18:53 GetSingleValue result=40 Value=cccccccc 02:18:53 SkyScan query 02:18:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:18:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:53 Parameters OK 02:18:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:53 Set A/D data flow result=40 02:18:53 Set A/D channel type result=40 02:18:53 Set A/D encoding result=40 02:18:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:53 Set channel filter=0.000000e+000 result=40 02:18:53 Config A/D Result=40 02:18:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:53 Get A/D filter: -9.255963e+061 result=40 02:18:53 Get A/D value=-858993460 result=40 02:18:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:53 Parameters OK 02:18:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:53 Set A/D data flow result=40 02:18:53 Set A/D channel type result=40 02:18:53 Set A/D encoding result=40 02:18:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:53 Set channel filter=0.000000e+000 result=40 02:18:53 Config A/D Result=40 02:18:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:53 Get A/D filter: -9.255963e+061 result=40 02:18:53 Get A/D value=-858993460 result=40 02:18:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:18:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:18:53 Aux= 02:18:53 Message to Camera, serial 101607 queued 02:19:02 Received message from Master: op=Shutter serial=101617 02:19:02 Shutter LASER close 02:19:02 Received message from Master: op=PointingHead serial=101621 02:19:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:19:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:19:02 Point started: ret=0 02:19:02 point_skyscan result=0 02:19:03 Check angles 02:19:03 SkyScan query 02:19:04 SkyScan query done: ret=0 az=89.655<-5977 ze=157.05<-1530 Statuses=0009 0009 02:19:04 Msec=0 True Az=89.655 Ze=157.05 Az status=0009 Ze status=0009 02:19:04 Check angles 02:19:04 SkyScan query 02:19:05 SkyScan query done: ret=0 az=72.24<-4816 ze=136.08<-2928 Statuses=0009 0009 02:19:05 Msec=750 True Az=72.24 Ze=136.08 Az status=0009 Ze status=0009 02:19:05 Check angles 02:19:05 SkyScan query 02:19:05 SkyScan query done: ret=0 az=54.63<-3642 ze=114.69<-4354 Statuses=0009 0009 02:19:05 Msec=1500 True Az=54.63 Ze=114.69 Az status=0009 Ze status=0009 02:19:05 Check angles 02:19:05 SkyScan query 02:19:06 SkyScan query done: ret=0 az=40.92<-2728 ze=93.765<-5749 Statuses=0009 0009 02:19:06 Msec=2250 True Az=40.92 Ze=93.765 Az status=0009 Ze status=0009 02:19:06 Check angles 02:19:06 SkyScan query 02:19:07 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 02:19:07 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 02:19:07 Check angles 02:19:07 SkyScan query 02:19:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 02:19:08 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 02:19:08 Check angles 02:19:08 SkyScan query 02:19:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:19:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:19:08 Message to Master queued w/err=0: serial=101621 error=0 02:19:13 Received message from Master: op=Filter serial=101622 02:19:13 Color wheel filter change from 0 to 0 02:19:13 FLIGetFilterPos err=0 currentPosition=0 02:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 02:19:13 Filter is already there-color wheel unchanged 02:19:13 Received message from Master: op=Shutter serial=101623 02:19:13 Shutter LASER close 02:19:14 Received message from Camera: op=State serial=101625 02:19:14 GetSingleValue result=40 Value=cccccccc 02:19:14 SkyScan query 02:19:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:14 Parameters OK 02:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:14 Set A/D data flow result=40 02:19:14 Set A/D channel type result=40 02:19:14 Set A/D encoding result=40 02:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:14 Set channel filter=0.000000e+000 result=40 02:19:14 Config A/D Result=40 02:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:14 Get A/D filter: -9.255963e+061 result=40 02:19:14 Get A/D value=-858993460 result=40 02:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:14 Parameters OK 02:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:14 Set A/D data flow result=40 02:19:14 Set A/D channel type result=40 02:19:14 Set A/D encoding result=40 02:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:14 Set channel filter=0.000000e+000 result=40 02:19:14 Config A/D Result=40 02:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:14 Get A/D filter: -9.255963e+061 result=40 02:19:14 Get A/D value=-858993460 result=40 02:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:19:14 Aux= 02:19:14 Message to Camera, serial 101625 queued 02:19:51 Received message from Master: op=PointingHead serial=101638 02:19:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:19:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:19:52 Point started: ret=0 02:19:52 point_skyscan result=0 02:19:52 Check angles 02:19:52 SkyScan query 02:19:53 SkyScan query done: ret=0 az=40.995<-2733 ze=21.735<-10551 Statuses=0008 0009 02:19:53 Msec=0 True Az=40.995 Ze=21.735 Az status=0008 Ze status=0009 02:19:53 Check angles 02:19:53 SkyScan query 02:19:54 SkyScan query done: ret=0 az=40.995<-2733 ze=0.345<-11977 Statuses=0008 0009 02:19:54 Msec=750 True Az=40.995 Ze=0.345 Az status=0008 Ze status=0009 02:19:54 Check angles 02:19:54 SkyScan query 02:19:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.595<-13373 Statuses=0008 0009 02:19:54 Msec=1500 True Az=40.995 Ze=-20.595 Az status=0008 Ze status=0009 02:19:55 Check angles 02:19:55 SkyScan query 02:19:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 02:19:55 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 02:19:55 Check angles 02:19:55 SkyScan query 02:19:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:19:56 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:19:56 Message to Master queued w/err=0: serial=101638 error=0 02:20:01 Received message from Master: op=Filter serial=101639 02:20:01 Color wheel filter change from 0 to 0 02:20:01 FLIGetFilterPos err=0 currentPosition=0 02:20:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:20:01 Filter is already there-color wheel unchanged 02:20:01 Received message from Master: op=Shutter serial=101640 02:20:01 Shutter LASER close 02:20:01 Received message from Camera: op=State serial=101642 02:20:01 GetSingleValue result=40 Value=cccccccc 02:20:01 SkyScan query 02:20:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:20:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:02 Parameters OK 02:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:02 Set A/D data flow result=40 02:20:02 Set A/D channel type result=40 02:20:02 Set A/D encoding result=40 02:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:02 Set channel filter=0.000000e+000 result=40 02:20:02 Config A/D Result=40 02:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:02 Get A/D filter: -9.255963e+061 result=40 02:20:02 Get A/D value=-858993460 result=40 02:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:02 Parameters OK 02:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:02 Set A/D data flow result=40 02:20:02 Set A/D channel type result=40 02:20:02 Set A/D encoding result=40 02:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:02 Set channel filter=0.000000e+000 result=40 02:20:02 Config A/D Result=40 02:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:02 Get A/D filter: -9.255963e+061 result=40 02:20:02 Get A/D value=-858993460 result=40 02:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:20:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:20:02 Aux= 02:20:02 Message to Camera, serial 101642 queued 02:20:39 Received message from Master: op=PointingHead serial=101655 02:20:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:20:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:20:39 Point started: ret=0 02:20:39 point_skyscan result=0 02:20:40 Check angles 02:20:40 SkyScan query 02:20:40 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.1<-16540 Statuses=0009 0009 02:20:40 Msec=0 True Az=63.87 Ze=-68.1 Az status=0009 Ze status=0009 02:20:40 Check angles 02:20:40 SkyScan query 02:20:41 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.52<-17968 Statuses=0009 0009 02:20:41 Msec=750 True Az=81.825 Ze=-89.52 Az status=0009 Ze status=0009 02:20:41 Check angles 02:20:41 SkyScan query 02:20:42 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.91<-19394 Statuses=0009 0009 02:20:42 Msec=1500 True Az=99.6 Ze=-110.91 Az status=0009 Ze status=0009 02:20:42 Check angles 02:20:42 SkyScan query 02:20:43 SkyScan query done: ret=0 az=117.135<-7809 ze=-131.85<-20790 Statuses=0009 0009 02:20:43 Msec=2250 True Az=117.135 Ze=-131.85 Az status=0009 Ze status=0009 02:20:43 Check angles 02:20:43 SkyScan query 02:20:43 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 02:20:43 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 02:20:43 Check angles 02:20:43 SkyScan query 02:20:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:20:44 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:20:44 Message to Master queued w/err=0: serial=101655 error=0 02:20:49 Received message from Master: op=Filter serial=101656 02:20:49 Color wheel filter change from 0 to 0 02:20:49 FLIGetFilterPos err=0 currentPosition=0 02:20:49 FLIGetStepsRemaining err=0 RemainingSteps=0 02:20:49 Filter is already there-color wheel unchanged 02:20:49 Received message from Master: op=Shutter serial=101657 02:20:49 Shutter LASER close 02:20:49 Received message from Camera: op=State serial=101659 02:20:49 GetSingleValue result=40 Value=cccccccc 02:20:49 SkyScan query 02:20:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:20:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:50 Parameters OK 02:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:50 Set A/D data flow result=40 02:20:50 Set A/D channel type result=40 02:20:50 Set A/D encoding result=40 02:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:50 Set channel filter=0.000000e+000 result=40 02:20:50 Config A/D Result=40 02:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:50 Get A/D filter: -9.255963e+061 result=40 02:20:50 Get A/D value=-858993460 result=40 02:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:50 Parameters OK 02:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:50 Set A/D data flow result=40 02:20:50 Set A/D channel type result=40 02:20:50 Set A/D encoding result=40 02:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:50 Set channel filter=0.000000e+000 result=40 02:20:50 Config A/D Result=40 02:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:50 Get A/D filter: -9.255963e+061 result=40 02:20:50 Get A/D value=-858993460 result=40 02:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:20:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:20:50 Aux= 02:20:50 Message to Camera, serial 101659 queued 02:21:27 Received message from Master: op=PointingHead serial=101672 02:21:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:21:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:21:27 Point started: ret=0 02:21:27 point_skyscan result=0 02:21:28 Check angles 02:21:28 SkyScan query 02:21:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 02:21:28 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 02:21:28 Check angles 02:21:28 SkyScan query 02:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:21:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:21:29 Message to Master queued w/err=0: serial=101672 error=0 02:21:34 Received message from Master: op=Filter serial=101673 02:21:34 Color wheel filter change from 0 to 0 02:21:34 FLIGetFilterPos err=0 currentPosition=0 02:21:34 FLIGetStepsRemaining err=0 RemainingSteps=0 02:21:34 Filter is already there-color wheel unchanged 02:21:34 Received message from Master: op=Shutter serial=101674 02:21:34 Shutter LASER open 02:21:34 Received message from Camera: op=State serial=101676 02:21:34 GetSingleValue result=40 Value=cccccccc 02:21:34 SkyScan query 02:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:21:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:35 Parameters OK 02:21:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:35 Set A/D data flow result=40 02:21:35 Set A/D channel type result=40 02:21:35 Set A/D encoding result=40 02:21:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:35 Set channel filter=0.000000e+000 result=40 02:21:35 Config A/D Result=40 02:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:35 Get A/D filter: -9.255963e+061 result=40 02:21:35 Get A/D value=-858993460 result=40 02:21:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:35 Parameters OK 02:21:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:35 Set A/D data flow result=40 02:21:35 Set A/D channel type result=40 02:21:35 Set A/D encoding result=40 02:21:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:35 Set channel filter=0.000000e+000 result=40 02:21:35 Config A/D Result=40 02:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:35 Get A/D filter: -9.255963e+061 result=40 02:21:35 Get A/D value=-858993460 result=40 02:21:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:21:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:21:35 Aux= 02:21:35 Message to Camera, serial 101676 queued 02:21:43 Received message from Master: op=Shutter serial=101686 02:21:43 Shutter LASER close 02:21:44 Received message from Master: op=PointingHead serial=101690 02:21:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:21:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:21:44 Point started: ret=0 02:21:44 point_skyscan result=0 02:21:45 Check angles 02:21:45 SkyScan query 02:21:46 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.905<-21527 Statuses=0009 0009 02:21:46 Msec=0 True Az=136.185 Ze=-142.905 Az status=0009 Ze status=0009 02:21:46 Check angles 02:21:46 SkyScan query 02:21:46 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.92<-20128 Statuses=0009 0009 02:21:46 Msec=750 True Az=153.72 Ze=-121.92 Az status=0009 Ze status=0009 02:21:47 Check angles 02:21:47 SkyScan query 02:21:47 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.515<-18701 Statuses=0009 0009 02:21:47 Msec=1500 True Az=171.495 Ze=-100.515 Az status=0009 Ze status=0009 02:21:47 Check angles 02:21:47 SkyScan query 02:21:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 02:21:48 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 02:21:48 Check angles 02:21:48 SkyScan query 02:21:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 02:21:49 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 02:21:49 Check angles 02:21:49 SkyScan query 02:21:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 02:21:49 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 02:21:49 Message to Master queued w/err=0: serial=101690 error=0 02:21:54 Received message from Master: op=Filter serial=101691 02:21:54 Color wheel filter change from 0 to 0 02:21:54 FLIGetFilterPos err=0 currentPosition=0 02:21:54 FLIGetStepsRemaining err=0 RemainingSteps=0 02:21:54 Filter is already there-color wheel unchanged 02:21:55 Received message from Master: op=Shutter serial=101692 02:21:55 Shutter LASER close 02:21:55 Received message from Camera: op=State serial=101694 02:21:55 GetSingleValue result=40 Value=cccccccc 02:21:55 SkyScan query 02:21:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:21:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:55 Parameters OK 02:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:55 Set A/D data flow result=40 02:21:55 Set A/D channel type result=40 02:21:55 Set A/D encoding result=40 02:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:55 Set channel filter=0.000000e+000 result=40 02:21:55 Config A/D Result=40 02:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:55 Get A/D filter: -9.255963e+061 result=40 02:21:55 Get A/D value=-858993460 result=40 02:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:55 Parameters OK 02:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:55 Set A/D data flow result=40 02:21:55 Set A/D channel type result=40 02:21:55 Set A/D encoding result=40 02:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:55 Set channel filter=0.000000e+000 result=40 02:21:55 Config A/D Result=40 02:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:55 Get A/D filter: -9.255963e+061 result=40 02:21:55 Get A/D value=-858993460 result=40 02:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:21:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:21:55 Aux= 02:21:55 Message to Camera, serial 101694 queued 02:22:32 Received message from Master: op=PointingHead serial=101707 02:22:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:22:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:22:33 Point started: ret=0 02:22:33 point_skyscan result=0 02:22:33 Check angles 02:22:33 SkyScan query 02:22:34 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.96<-13464 Statuses=0009 0009 02:22:34 Msec=0 True Az=153.18 Ze=-21.96 Az status=0009 Ze status=0009 02:22:34 Check angles 02:22:34 SkyScan query 02:22:35 SkyScan query done: ret=0 az=135.765<-9051 ze=-0.99<-12066 Statuses=0009 0009 02:22:35 Msec=750 True Az=135.765 Ze=-0.99 Az status=0009 Ze status=0009 02:22:35 Check angles 02:22:35 SkyScan query 02:22:35 SkyScan query done: ret=0 az=118.2<-7880 ze=19.965<-10669 Statuses=0009 0009 02:22:35 Msec=1500 True Az=118.2 Ze=19.965 Az status=0009 Ze status=0009 02:22:36 Check angles 02:22:36 SkyScan query 02:22:36 SkyScan query done: ret=0 az=100.8<-6720 ze=40.92<-9272 Statuses=0009 0009 02:22:36 Msec=2250 True Az=100.8 Ze=40.92 Az status=0009 Ze status=0009 02:22:36 Check angles 02:22:36 SkyScan query 02:22:37 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:22:37 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:22:37 Check angles 02:22:37 SkyScan query 02:22:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:22:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:22:38 Message to Master queued w/err=0: serial=101707 error=0 02:22:43 Received message from Master: op=Filter serial=101708 02:22:43 Color wheel filter change from 0 to 0 02:22:43 FLIGetFilterPos err=0 currentPosition=0 02:22:43 FLIGetStepsRemaining err=0 RemainingSteps=0 02:22:43 Filter is already there-color wheel unchanged 02:22:43 Received message from Master: op=Shutter serial=101709 02:22:43 Shutter LASER close 02:22:43 Received message from Camera: op=State serial=101711 02:22:43 GetSingleValue result=40 Value=cccccccc 02:22:43 SkyScan query 02:22:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:43 Parameters OK 02:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:43 Set A/D data flow result=40 02:22:43 Set A/D channel type result=40 02:22:43 Set A/D encoding result=40 02:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:43 Set channel filter=0.000000e+000 result=40 02:22:43 Config A/D Result=40 02:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:43 Get A/D filter: -9.255963e+061 result=40 02:22:43 Get A/D value=-858993460 result=40 02:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:43 Parameters OK 02:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:43 Set A/D data flow result=40 02:22:43 Set A/D channel type result=40 02:22:43 Set A/D encoding result=40 02:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:43 Set channel filter=0.000000e+000 result=40 02:22:43 Config A/D Result=40 02:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:43 Get A/D filter: -9.255963e+061 result=40 02:22:43 Get A/D value=-858993460 result=40 02:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:22:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:22:43 Aux= 02:22:43 Message to Camera, serial 101711 queued 02:23:20 Received message from Master: op=PointingHead serial=101724 02:23:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:23:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:23:21 Point started: ret=0 02:23:21 point_skyscan result=0 02:23:21 Check angles 02:23:21 SkyScan query 02:23:22 SkyScan query done: ret=0 az=85.995<-5733 ze=21.525<-10565 Statuses=0008 0009 02:23:22 Msec=0 True Az=85.995 Ze=21.525 Az status=0008 Ze status=0009 02:23:22 Check angles 02:23:22 SkyScan query 02:23:23 SkyScan query done: ret=0 az=85.995<-5733 ze=0.57<-11962 Statuses=0008 0009 02:23:23 Msec=750 True Az=85.995 Ze=0.57 Az status=0008 Ze status=0009 02:23:23 Check angles 02:23:23 SkyScan query 02:23:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.385<-13359 Statuses=0008 0009 02:23:24 Msec=1500 True Az=85.995 Ze=-20.385 Az status=0008 Ze status=0009 02:23:24 Check angles 02:23:24 SkyScan query 02:23:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.31<-14754 Statuses=0008 0009 02:23:24 Msec=2250 True Az=85.995 Ze=-41.31 Az status=0008 Ze status=0009 02:23:24 Check angles 02:23:24 SkyScan query 02:23:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:23:25 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:23:25 Message to Master queued w/err=0: serial=101724 error=0 02:23:30 Received message from Master: op=Filter serial=101725 02:23:30 Color wheel filter change from 0 to 0 02:23:30 FLIGetFilterPos err=0 currentPosition=0 02:23:30 FLIGetStepsRemaining err=0 RemainingSteps=0 02:23:30 Filter is already there-color wheel unchanged 02:23:30 Received message from Master: op=Shutter serial=101726 02:23:30 Shutter LASER close 02:23:30 Received message from Camera: op=State serial=101728 02:23:30 GetSingleValue result=40 Value=cccccccc 02:23:30 SkyScan query 02:23:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:23:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:31 Parameters OK 02:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:31 Set A/D data flow result=40 02:23:31 Set A/D channel type result=40 02:23:31 Set A/D encoding result=40 02:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:31 Set channel filter=0.000000e+000 result=40 02:23:31 Config A/D Result=40 02:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:31 Get A/D filter: -9.255963e+061 result=40 02:23:31 Get A/D value=-858993460 result=40 02:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:31 Parameters OK 02:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:31 Set A/D data flow result=40 02:23:31 Set A/D channel type result=40 02:23:31 Set A/D encoding result=40 02:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:31 Set channel filter=0.000000e+000 result=40 02:23:31 Config A/D Result=40 02:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:31 Get A/D filter: -9.255963e+061 result=40 02:23:31 Get A/D value=-858993460 result=40 02:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:23:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:23:31 Aux= 02:23:31 Message to Camera, serial 101728 queued 02:24:08 Received message from Master: op=PointingHead serial=101741 02:24:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:24:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:24:08 Point started: ret=0 02:24:08 point_skyscan result=0 02:24:09 Check angles 02:24:09 SkyScan query 02:24:09 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.3<-17420 Statuses=0009 0009 02:24:09 Msec=0 True Az=108.99 Ze=-81.3 Az status=0009 Ze status=0009 02:24:10 Check angles 02:24:10 SkyScan query 02:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 02:24:10 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 02:24:10 Check angles 02:24:10 SkyScan query 02:24:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 02:24:11 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 02:24:11 Check angles 02:24:11 SkyScan query 02:24:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 02:24:12 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 02:24:12 Check angles 02:24:12 SkyScan query 02:24:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 02:24:12 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 02:24:13 Check angles 02:24:13 SkyScan query 02:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:24:13 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:24:13 Message to Master queued w/err=0: serial=101741 error=0 02:24:18 Received message from Master: op=Filter serial=101742 02:24:18 Color wheel filter change from 0 to 0 02:24:18 FLIGetFilterPos err=0 currentPosition=0 02:24:18 FLIGetStepsRemaining err=0 RemainingSteps=0 02:24:18 Filter is already there-color wheel unchanged 02:24:18 Received message from Master: op=Shutter serial=101743 02:24:18 Shutter LASER open 02:24:18 Received message from Camera: op=State serial=101745 02:24:18 GetSingleValue result=40 Value=cccccccc 02:24:18 SkyScan query 02:24:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:24:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:19 Parameters OK 02:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:19 Set A/D data flow result=40 02:24:19 Set A/D channel type result=40 02:24:19 Set A/D encoding result=40 02:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:19 Set channel filter=0.000000e+000 result=40 02:24:19 Config A/D Result=40 02:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:19 Get A/D filter: -9.255963e+061 result=40 02:24:19 Get A/D value=-858993460 result=40 02:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:19 Parameters OK 02:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:19 Set A/D data flow result=40 02:24:19 Set A/D channel type result=40 02:24:19 Set A/D encoding result=40 02:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:19 Set channel filter=0.000000e+000 result=40 02:24:19 Config A/D Result=40 02:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:19 Get A/D filter: -9.255963e+061 result=40 02:24:19 Get A/D value=-858993460 result=40 02:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:24:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:24:19 Aux= 02:24:19 Message to Camera, serial 101745 queued 02:24:27 Received message from Master: op=Shutter serial=101755 02:24:27 Shutter LASER close 02:24:28 Received message from Master: op=PointingHead serial=101759 02:24:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:24:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:24:28 Point started: ret=0 02:24:28 point_skyscan result=0 02:24:29 Check angles 02:24:29 SkyScan query 02:24:30 SkyScan query done: ret=0 az=89.88<-5992 ze=157.2<-1520 Statuses=0009 0009 02:24:30 Msec=0 True Az=89.88 Ze=157.2 Az status=0009 Ze status=0009 02:24:30 Check angles 02:24:30 SkyScan query 02:24:30 SkyScan query done: ret=0 az=72.015<-4801 ze=135.825<-2945 Statuses=0009 0009 02:24:30 Msec=750 True Az=72.015 Ze=135.825 Az status=0009 Ze status=0009 02:24:31 Check angles 02:24:31 SkyScan query 02:24:31 SkyScan query done: ret=0 az=54.735<-3649 ze=114.84<-4344 Statuses=0009 0009 02:24:31 Msec=1500 True Az=54.735 Ze=114.84 Az status=0009 Ze status=0009 02:24:31 Check angles 02:24:31 SkyScan query 02:24:32 SkyScan query done: ret=0 az=40.95<-2730 ze=93.36<-5776 Statuses=0009 0009 02:24:32 Msec=2250 True Az=40.95 Ze=93.36 Az status=0009 Ze status=0009 02:24:32 Check angles 02:24:32 SkyScan query 02:24:33 SkyScan query done: ret=0 az=40.995<-2733 ze=72.48<-7168 Statuses=0008 0009 02:24:33 Msec=3000 True Az=40.995 Ze=72.48 Az status=0008 Ze status=0009 02:24:33 Check angles 02:24:33 SkyScan query 02:24:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 02:24:33 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 02:24:34 Check angles 02:24:34 SkyScan query 02:24:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:24:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:24:34 Message to Master queued w/err=0: serial=101759 error=0 02:24:39 Received message from Master: op=Filter serial=101760 02:24:39 Color wheel filter change from 0 to 0 02:24:39 FLIGetFilterPos err=0 currentPosition=0 02:24:39 FLIGetStepsRemaining err=0 RemainingSteps=0 02:24:39 Filter is already there-color wheel unchanged 02:24:39 Received message from Master: op=Shutter serial=101761 02:24:39 Shutter LASER close 02:24:40 Received message from Camera: op=State serial=101763 02:24:40 GetSingleValue result=40 Value=cccccccc 02:24:40 SkyScan query 02:24:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:24:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:40 Parameters OK 02:24:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:40 Set A/D data flow result=40 02:24:40 Set A/D channel type result=40 02:24:40 Set A/D encoding result=40 02:24:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:40 Set channel filter=0.000000e+000 result=40 02:24:40 Config A/D Result=40 02:24:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:40 Get A/D filter: -9.255963e+061 result=40 02:24:40 Get A/D value=-858993460 result=40 02:24:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:40 Parameters OK 02:24:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:40 Set A/D data flow result=40 02:24:40 Set A/D channel type result=40 02:24:40 Set A/D encoding result=40 02:24:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:40 Set channel filter=0.000000e+000 result=40 02:24:40 Config A/D Result=40 02:24:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:40 Get A/D filter: -9.255963e+061 result=40 02:24:40 Get A/D value=-858993460 result=40 02:24:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:24:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:24:40 Aux= 02:24:40 Message to Camera, serial 101763 queued 02:25:17 Received message from Master: op=PointingHead serial=101776 02:25:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:25:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:25:17 Point started: ret=0 02:25:17 point_skyscan result=0 02:25:18 Check angles 02:25:18 SkyScan query 02:25:19 SkyScan query done: ret=0 az=40.995<-2733 ze=21.795<-10547 Statuses=0008 0009 02:25:19 Msec=0 True Az=40.995 Ze=21.795 Az status=0008 Ze status=0009 02:25:19 Check angles 02:25:19 SkyScan query 02:25:20 SkyScan query done: ret=0 az=40.995<-2733 ze=0.39<-11974 Statuses=0008 0009 02:25:20 Msec=750 True Az=40.995 Ze=0.39 Az status=0008 Ze status=0009 02:25:20 Check angles 02:25:20 SkyScan query 02:25:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.535<-13369 Statuses=0008 0009 02:25:20 Msec=1500 True Az=40.995 Ze=-20.535 Az status=0008 Ze status=0009 02:25:20 Check angles 02:25:20 SkyScan query 02:25:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 02:25:21 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 02:25:21 Check angles 02:25:21 SkyScan query 02:25:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:25:22 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:25:22 Message to Master queued w/err=0: serial=101776 error=0 02:25:27 Received message from Master: op=Filter serial=101777 02:25:27 Color wheel filter change from 0 to 0 02:25:27 FLIGetFilterPos err=0 currentPosition=0 02:25:27 FLIGetStepsRemaining err=0 RemainingSteps=0 02:25:27 Filter is already there-color wheel unchanged 02:25:27 Received message from Master: op=Shutter serial=101778 02:25:27 Shutter LASER close [UTC 2018-12-13 02:25:27] 02:25:27 Received message from Camera: op=State serial=101780 02:25:27 GetSingleValue result=40 Value=cccccccc 02:25:27 SkyScan query 02:25:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:25:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:28 Parameters OK 02:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:28 Set A/D data flow result=40 02:25:28 Set A/D channel type result=40 02:25:28 Set A/D encoding result=40 02:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:28 Set channel filter=0.000000e+000 result=40 02:25:28 Config A/D Result=40 02:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:28 Get A/D filter: -9.255963e+061 result=40 02:25:28 Get A/D value=-858993460 result=40 02:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:28 Parameters OK 02:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:28 Set A/D data flow result=40 02:25:28 Set A/D channel type result=40 02:25:28 Set A/D encoding result=40 02:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:28 Set channel filter=0.000000e+000 result=40 02:25:28 Config A/D Result=40 02:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:28 Get A/D filter: -9.255963e+061 result=40 02:25:28 Get A/D value=-858993460 result=40 02:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:25:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:25:28 Aux= 02:25:28 Message to Camera, serial 101780 queued 02:26:04 Received message from Master: op=PointingHead serial=101793 02:26:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:26:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:26:05 Point started: ret=0 02:26:05 point_skyscan result=0 02:26:06 Check angles 02:26:06 SkyScan query 02:26:06 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.565<-16571 Statuses=0009 0009 02:26:06 Msec=0 True Az=64.185 Ze=-68.565 Az status=0009 Ze status=0009 02:26:06 Check angles 02:26:06 SkyScan query 02:26:07 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.565<-17971 Statuses=0009 0009 02:26:07 Msec=750 True Az=81.855 Ze=-89.565 Az status=0009 Ze status=0009 02:26:07 Check angles 02:26:07 SkyScan query 02:26:08 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.535<-19369 Statuses=0009 0009 02:26:08 Msec=1500 True Az=99.24 Ze=-110.535 Az status=0009 Ze status=0009 02:26:08 Check angles 02:26:08 SkyScan query 02:26:08 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.46<-20764 Statuses=0009 0009 02:26:08 Msec=2250 True Az=116.745 Ze=-131.46 Az status=0009 Ze status=0009 02:26:09 Check angles 02:26:09 SkyScan query 02:26:09 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 02:26:09 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 02:26:09 Check angles 02:26:09 SkyScan query 02:26:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:26:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:26:10 Message to Master queued w/err=0: serial=101793 error=0 02:26:15 Received message from Master: op=Filter serial=101794 02:26:15 Color wheel filter change from 0 to 0 02:26:15 FLIGetFilterPos err=0 currentPosition=0 02:26:15 FLIGetStepsRemaining err=0 RemainingSteps=0 02:26:15 Filter is already there-color wheel unchanged 02:26:15 Received message from Master: op=Shutter serial=101795 02:26:15 Shutter LASER close 02:26:15 Received message from Camera: op=State serial=101797 02:26:15 GetSingleValue result=40 Value=cccccccc 02:26:15 SkyScan query 02:26:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:26:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:16 Parameters OK 02:26:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:16 Set A/D data flow result=40 02:26:16 Set A/D channel type result=40 02:26:16 Set A/D encoding result=40 02:26:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:16 Set channel filter=0.000000e+000 result=40 02:26:16 Config A/D Result=40 02:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:16 Get A/D filter: -9.255963e+061 result=40 02:26:16 Get A/D value=-858993460 result=40 02:26:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:16 Parameters OK 02:26:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:16 Set A/D data flow result=40 02:26:16 Set A/D channel type result=40 02:26:16 Set A/D encoding result=40 02:26:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:16 Set channel filter=0.000000e+000 result=40 02:26:16 Config A/D Result=40 02:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:16 Get A/D filter: -9.255963e+061 result=40 02:26:16 Get A/D value=-858993460 result=40 02:26:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:26:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:26:16 Aux= 02:26:16 Message to Camera, serial 101797 queued 02:26:52 Received message from Master: op=PointingHead serial=101810 02:26:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:26:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:26:53 Point started: ret=0 02:26:53 point_skyscan result=0 02:26:54 Check angles 02:26:54 SkyScan query 02:26:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 02:26:54 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 02:26:54 Check angles 02:26:54 SkyScan query 02:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:26:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:26:55 Message to Master queued w/err=0: serial=101810 error=0 02:27:00 Received message from Master: op=Filter serial=101811 02:27:00 Color wheel filter change from 0 to 0 02:27:00 FLIGetFilterPos err=0 currentPosition=0 02:27:00 FLIGetStepsRemaining err=0 RemainingSteps=0 02:27:00 Filter is already there-color wheel unchanged 02:27:00 Received message from Master: op=Shutter serial=101812 02:27:00 Shutter LASER open 02:27:00 Received message from Camera: op=State serial=101814 02:27:00 GetSingleValue result=40 Value=cccccccc 02:27:00 SkyScan query 02:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:27:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:01 Parameters OK 02:27:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:01 Set A/D data flow result=40 02:27:01 Set A/D channel type result=40 02:27:01 Set A/D encoding result=40 02:27:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:01 Set channel filter=0.000000e+000 result=40 02:27:01 Config A/D Result=40 02:27:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:01 Get A/D filter: -9.255963e+061 result=40 02:27:01 Get A/D value=-858993460 result=40 02:27:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:01 Parameters OK 02:27:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:01 Set A/D data flow result=40 02:27:01 Set A/D channel type result=40 02:27:01 Set A/D encoding result=40 02:27:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:01 Set channel filter=0.000000e+000 result=40 02:27:01 Config A/D Result=40 02:27:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:01 Get A/D filter: -9.255963e+061 result=40 02:27:01 Get A/D value=-858993460 result=40 02:27:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:27:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:27:01 Aux= 02:27:01 Message to Camera, serial 101814 queued 02:27:09 Received message from Master: op=Shutter serial=101824 02:27:09 Shutter LASER close 02:27:10 Received message from Master: op=PointingHead serial=101828 02:27:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:27:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:27:10 Point started: ret=0 02:27:10 point_skyscan result=0 02:27:11 Check angles 02:27:11 SkyScan query 02:27:12 SkyScan query done: ret=0 az=136.035<-9069 ze=-143.055<-21537 Statuses=0009 0009 02:27:12 Msec=0 True Az=136.035 Ze=-143.055 Az status=0009 Ze status=0009 02:27:12 Check angles 02:27:12 SkyScan query 02:27:12 SkyScan query done: ret=0 az=153.945<-10263 ze=-121.695<-20113 Statuses=0009 0009 02:27:12 Msec=750 True Az=153.945 Ze=-121.695 Az status=0009 Ze status=0009 02:27:12 Check angles 02:27:12 SkyScan query 02:27:13 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.695<-18713 Statuses=0009 0009 02:27:13 Msec=1500 True Az=171.465 Ze=-100.695 Az status=0009 Ze status=0009 02:27:13 Check angles 02:27:13 SkyScan query 02:27:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.8<-17320 Statuses=0008 0009 02:27:14 Msec=2250 True Az=176.01 Ze=-79.8 Az status=0008 Ze status=0009 02:27:14 Check angles 02:27:14 SkyScan query 02:27:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.815<-15921 Statuses=0008 0009 02:27:15 Msec=3000 True Az=176.01 Ze=-58.815 Az status=0008 Ze status=0009 02:27:15 Check angles 02:27:15 SkyScan query 02:27:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:27:15 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:27:15 Message to Master queued w/err=0: serial=101828 error=0 02:27:20 Received message from Master: op=Filter serial=101829 02:27:20 Color wheel filter change from 0 to 0 02:27:20 FLIGetFilterPos err=0 currentPosition=0 02:27:20 FLIGetStepsRemaining err=0 RemainingSteps=0 02:27:20 Filter is already there-color wheel unchanged 02:27:20 Received message from Master: op=Shutter serial=101830 02:27:20 Shutter LASER close 02:27:21 Received message from Camera: op=State serial=101832 02:27:21 GetSingleValue result=40 Value=cccccccc 02:27:21 SkyScan query 02:27:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:27:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:21 Parameters OK 02:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:21 Set A/D data flow result=40 02:27:21 Set A/D channel type result=40 02:27:21 Set A/D encoding result=40 02:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:21 Set channel filter=0.000000e+000 result=40 02:27:21 Config A/D Result=40 02:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:21 Get A/D filter: -9.255963e+061 result=40 02:27:21 Get A/D value=-858993460 result=40 02:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:21 Parameters OK 02:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:21 Set A/D data flow result=40 02:27:21 Set A/D channel type result=40 02:27:21 Set A/D encoding result=40 02:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:21 Set channel filter=0.000000e+000 result=40 02:27:21 Config A/D Result=40 02:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:21 Get A/D filter: -9.255963e+061 result=40 02:27:21 Get A/D value=-858993460 result=40 02:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:27:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:27:21 Aux= 02:27:21 Message to Camera, serial 101832 queued 02:27:58 Received message from Master: op=PointingHead serial=101845 02:27:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:27:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:27:58 Point started: ret=0 02:27:58 point_skyscan result=0 02:27:59 Check angles 02:27:59 SkyScan query 02:28:00 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.69<-13446 Statuses=0009 0009 02:28:00 Msec=0 True Az=152.985 Ze=-21.69 Az status=0009 Ze status=0009 02:28:00 Check angles 02:28:00 SkyScan query 02:28:00 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.285<-12019 Statuses=0009 0009 02:28:00 Msec=750 True Az=135.09 Ze=-0.285 Az status=0009 Ze status=0009 02:28:01 Check angles 02:28:01 SkyScan query 02:28:01 SkyScan query done: ret=0 az=117.555<-7837 ze=20.67<-10622 Statuses=0009 0009 02:28:01 Msec=1500 True Az=117.555 Ze=20.67 Az status=0009 Ze status=0009 02:28:01 Check angles 02:28:01 SkyScan query 02:28:02 SkyScan query done: ret=0 az=99.825<-6655 ze=42.075<-9195 Statuses=0009 0009 02:28:02 Msec=2250 True Az=99.825 Ze=42.075 Az status=0009 Ze status=0009 02:28:02 Check angles 02:28:02 SkyScan query 02:28:03 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 02:28:03 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 02:28:03 Check angles 02:28:03 SkyScan query 02:28:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:28:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:28:03 Message to Master queued w/err=0: serial=101845 error=0 02:28:08 Received message from Master: op=Filter serial=101846 02:28:08 Color wheel filter change from 0 to 0 02:28:08 FLIGetFilterPos err=0 currentPosition=0 02:28:08 FLIGetStepsRemaining err=0 RemainingSteps=0 02:28:08 Filter is already there-color wheel unchanged 02:28:09 Received message from Master: op=Shutter serial=101847 02:28:09 Shutter LASER close 02:28:09 Received message from Camera: op=State serial=101849 02:28:09 GetSingleValue result=40 Value=cccccccc 02:28:09 SkyScan query 02:28:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:28:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:09 Parameters OK 02:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:09 Set A/D data flow result=40 02:28:09 Set A/D channel type result=40 02:28:09 Set A/D encoding result=40 02:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:09 Set channel filter=0.000000e+000 result=40 02:28:09 Config A/D Result=40 02:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:09 Get A/D filter: -9.255963e+061 result=40 02:28:09 Get A/D value=-858993460 result=40 02:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:09 Parameters OK 02:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:09 Set A/D data flow result=40 02:28:09 Set A/D channel type result=40 02:28:09 Set A/D encoding result=40 02:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:09 Set channel filter=0.000000e+000 result=40 02:28:09 Config A/D Result=40 02:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:09 Get A/D filter: -9.255963e+061 result=40 02:28:09 Get A/D value=-858993460 result=40 02:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:28:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:28:09 Aux= 02:28:09 Message to Camera, serial 101849 queued 02:28:46 Received message from Master: op=PointingHead serial=101862 02:28:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:28:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:28:47 Point started: ret=0 02:28:47 point_skyscan result=0 02:28:47 Check angles 02:28:47 SkyScan query 02:28:48 SkyScan query done: ret=0 az=85.995<-5733 ze=21.24<-10584 Statuses=0008 0009 02:28:48 Msec=0 True Az=85.995 Ze=21.24 Az status=0008 Ze status=0009 02:28:48 Check angles 02:28:48 SkyScan query 02:28:49 SkyScan query done: ret=0 az=85.995<-5733 ze=0.27<-11982 Statuses=0008 0009 02:28:49 Msec=750 True Az=85.995 Ze=0.27 Az status=0008 Ze status=0009 02:28:49 Check angles 02:28:49 SkyScan query 02:28:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.655<-13377 Statuses=0008 0009 02:28:49 Msec=1500 True Az=85.995 Ze=-20.655 Az status=0008 Ze status=0009 02:28:50 Check angles 02:28:50 SkyScan query 02:28:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.06<-14804 Statuses=0008 0009 02:28:50 Msec=2250 True Az=85.995 Ze=-42.06 Az status=0008 Ze status=0009 02:28:50 Check angles 02:28:50 SkyScan query 02:28:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:28:51 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:28:51 Message to Master queued w/err=0: serial=101862 error=0 02:28:56 Received message from Master: op=Filter serial=101863 02:28:56 Color wheel filter change from 0 to 0 02:28:56 FLIGetFilterPos err=0 currentPosition=0 02:28:56 FLIGetStepsRemaining err=0 RemainingSteps=0 02:28:56 Filter is already there-color wheel unchanged 02:28:56 Received message from Master: op=Shutter serial=101864 02:28:56 Shutter LASER close 02:28:56 Received message from Camera: op=State serial=101866 02:28:56 GetSingleValue result=40 Value=cccccccc 02:28:56 SkyScan query 02:28:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:28:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:57 Parameters OK 02:28:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:57 Set A/D data flow result=40 02:28:57 Set A/D channel type result=40 02:28:57 Set A/D encoding result=40 02:28:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:57 Set channel filter=0.000000e+000 result=40 02:28:57 Config A/D Result=40 02:28:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:57 Get A/D filter: -9.255963e+061 result=40 02:28:57 Get A/D value=-858993460 result=40 02:28:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:57 Parameters OK 02:28:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:57 Set A/D data flow result=40 02:28:57 Set A/D channel type result=40 02:28:57 Set A/D encoding result=40 02:28:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:57 Set channel filter=0.000000e+000 result=40 02:28:57 Config A/D Result=40 02:28:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:57 Get A/D filter: -9.255963e+061 result=40 02:28:57 Get A/D value=-858993460 result=40 02:28:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:28:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:28:57 Aux= 02:28:57 Message to Camera, serial 101866 queued 02:29:33 Received message from Master: op=PointingHead serial=101878 02:29:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:29:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:29:33 Point started: ret=0 02:29:33 point_skyscan result=0 02:29:34 Check angles 02:29:34 SkyScan query 02:29:34 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.105<-17407 Statuses=0009 0009 02:29:34 Msec=0 True Az=108.885 Ze=-81.105 Az status=0009 Ze status=0009 02:29:34 Check angles 02:29:34 SkyScan query 02:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 02:29:35 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 02:29:35 Check angles 02:29:35 SkyScan query 02:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 02:29:36 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 02:29:36 Check angles 02:29:36 SkyScan query 02:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.955<-21597 Statuses=0008 0009 02:29:37 Msec=2250 True Az=112.995 Ze=-143.955 Az status=0008 Ze status=0009 02:29:37 Check angles 02:29:37 SkyScan query 02:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 02:29:37 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 02:29:37 Check angles 02:29:37 SkyScan query 02:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:29:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:29:38 Message to Master queued w/err=0: serial=101878 error=0 02:29:43 Received message from Master: op=Filter serial=101879 02:29:43 Color wheel filter change from 0 to 0 02:29:43 FLIGetFilterPos err=0 currentPosition=0 02:29:43 FLIGetStepsRemaining err=0 RemainingSteps=0 02:29:43 Filter is already there-color wheel unchanged 02:29:43 Received message from Master: op=Shutter serial=101880 02:29:43 Shutter LASER open 02:29:43 Received message from Camera: op=State serial=101882 02:29:43 GetSingleValue result=40 Value=cccccccc 02:29:43 SkyScan query 02:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:29:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:44 Parameters OK 02:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:44 Set A/D data flow result=40 02:29:44 Set A/D channel type result=40 02:29:44 Set A/D encoding result=40 02:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:44 Set channel filter=0.000000e+000 result=40 02:29:44 Config A/D Result=40 02:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:44 Get A/D filter: -9.255963e+061 result=40 02:29:44 Get A/D value=-858993460 result=40 02:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:44 Parameters OK 02:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:44 Set A/D data flow result=40 02:29:44 Set A/D channel type result=40 02:29:44 Set A/D encoding result=40 02:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:44 Set channel filter=0.000000e+000 result=40 02:29:44 Config A/D Result=40 02:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:44 Get A/D filter: -9.255963e+061 result=40 02:29:44 Get A/D value=-858993460 result=40 02:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:29:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:29:44 Aux= 02:29:44 Message to Camera, serial 101882 queued 02:29:52 Received message from Master: op=Shutter serial=101892 02:29:52 Shutter LASER close 02:29:53 Received message from Master: op=PointingHead serial=101896 02:29:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:29:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:29:53 Point started: ret=0 02:29:53 point_skyscan result=0 02:29:54 Check angles 02:29:54 SkyScan query 02:29:55 SkyScan query done: ret=0 az=89.865<-5991 ze=157.245<-1517 Statuses=0009 0009 02:29:55 Msec=0 True Az=89.865 Ze=157.245 Az status=0009 Ze status=0009 02:29:55 Check angles 02:29:55 SkyScan query 02:29:55 SkyScan query done: ret=0 az=72.03<-4802 ze=135.825<-2945 Statuses=0009 0009 02:29:55 Msec=750 True Az=72.03 Ze=135.825 Az status=0009 Ze status=0009 02:29:55 Check angles 02:29:55 SkyScan query 02:29:56 SkyScan query done: ret=0 az=54.78<-3652 ze=114.885<-4341 Statuses=0009 0009 02:29:56 Msec=1500 True Az=54.78 Ze=114.885 Az status=0009 Ze status=0009 02:29:56 Check angles 02:29:56 SkyScan query 02:29:57 SkyScan query done: ret=0 az=40.875<-2725 ze=93.915<-5739 Statuses=0009 0009 02:29:57 Msec=2250 True Az=40.875 Ze=93.915 Az status=0009 Ze status=0009 02:29:57 Check angles 02:29:57 SkyScan query 02:29:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 02:29:58 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 02:29:58 Check angles 02:29:58 SkyScan query 02:29:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 02:29:58 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 02:29:59 Check angles 02:29:59 SkyScan query 02:29:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:29:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:29:59 Message to Master queued w/err=0: serial=101896 error=0 02:30:04 Received message from Master: op=Filter serial=101897 02:30:04 Color wheel filter change from 0 to 0 02:30:04 FLIGetFilterPos err=0 currentPosition=0 02:30:04 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:04 Filter is already there-color wheel unchanged 02:30:04 Received message from Master: op=Shutter serial=101898 02:30:04 Shutter LASER close 02:30:04 Received message from Camera: op=State serial=101900 02:30:04 GetSingleValue result=40 Value=cccccccc 02:30:04 SkyScan query 02:30:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:30:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:05 Parameters OK 02:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:05 Set A/D data flow result=40 02:30:05 Set A/D channel type result=40 02:30:05 Set A/D encoding result=40 02:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:05 Set channel filter=0.000000e+000 result=40 02:30:05 Config A/D Result=40 02:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:05 Get A/D filter: -9.255963e+061 result=40 02:30:05 Get A/D value=-858993460 result=40 02:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:05 Parameters OK 02:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:05 Set A/D data flow result=40 02:30:05 Set A/D channel type result=40 02:30:05 Set A/D encoding result=40 02:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:05 Set channel filter=0.000000e+000 result=40 02:30:05 Config A/D Result=40 02:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:05 Get A/D filter: -9.255963e+061 result=40 02:30:05 Get A/D value=-858993460 result=40 02:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:05 Aux= 02:30:05 Message to Camera, serial 101900 queued 02:30:42 Received message from Master: op=PointingHead serial=101913 02:30:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:30:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:30:42 Point started: ret=0 02:30:42 point_skyscan result=0 02:30:43 Check angles 02:30:43 SkyScan query 02:30:44 SkyScan query done: ret=0 az=40.995<-2733 ze=21.675<-10555 Statuses=0008 0009 02:30:44 Msec=0 True Az=40.995 Ze=21.675 Az status=0008 Ze status=0009 02:30:44 Check angles 02:30:44 SkyScan query 02:30:44 SkyScan query done: ret=0 az=40.995<-2733 ze=0.225<-11985 Statuses=0008 0009 02:30:44 Msec=750 True Az=40.995 Ze=0.225 Az status=0008 Ze status=0009 02:30:45 Check angles 02:30:45 SkyScan query 02:30:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.165<-13411 Statuses=0008 0009 02:30:45 Msec=1500 True Az=40.995 Ze=-21.165 Az status=0008 Ze status=0009 02:30:45 Check angles 02:30:45 SkyScan query 02:30:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 02:30:46 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 02:30:46 Check angles 02:30:46 SkyScan query 02:30:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:30:47 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:30:47 Message to Master queued w/err=0: serial=101913 error=0 02:30:52 Received message from Master: op=Filter serial=101914 02:30:52 Color wheel filter change from 0 to 0 02:30:52 FLIGetFilterPos err=0 currentPosition=0 02:30:52 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:52 Filter is already there-color wheel unchanged 02:30:52 Received message from Master: op=Shutter serial=101915 02:30:52 Shutter LASER close 02:30:52 Received message from Camera: op=State serial=101917 02:30:52 GetSingleValue result=40 Value=cccccccc 02:30:52 SkyScan query 02:30:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:30:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:52 Parameters OK 02:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:52 Set A/D data flow result=40 02:30:52 Set A/D channel type result=40 02:30:52 Set A/D encoding result=40 02:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:52 Set channel filter=0.000000e+000 result=40 02:30:52 Config A/D Result=40 02:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:52 Get A/D filter: -9.255963e+061 result=40 02:30:52 Get A/D value=-858993460 result=40 02:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:52 Parameters OK 02:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:52 Set A/D data flow result=40 02:30:52 Set A/D channel type result=40 02:30:52 Set A/D encoding result=40 02:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:52 Set channel filter=0.000000e+000 result=40 02:30:52 Config A/D Result=40 02:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:52 Get A/D filter: -9.255963e+061 result=40 02:30:52 Get A/D value=-858993460 result=40 02:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:52 Aux= 02:30:52 Message to Camera, serial 101917 queued 02:31:29 Received message from Master: op=PointingHead serial=101930 02:31:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:31:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:31:30 Point started: ret=0 02:31:30 point_skyscan result=0 02:31:30 Check angles 02:31:30 SkyScan query 02:31:31 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.115<-16541 Statuses=0009 0009 02:31:31 Msec=0 True Az=63.765 Ze=-68.115 Az status=0009 Ze status=0009 02:31:31 Check angles 02:31:31 SkyScan query 02:31:32 SkyScan query done: ret=0 az=81.12<-5408 ze=-88.98<-17932 Statuses=0009 0009 02:31:32 Msec=750 True Az=81.12 Ze=-88.98 Az status=0009 Ze status=0009 02:31:32 Check angles 02:31:32 SkyScan query 02:31:32 SkyScan query done: ret=0 az=98.7<-6580 ze=-109.905<-19327 Statuses=0009 0009 02:31:32 Msec=1500 True Az=98.7 Ze=-109.905 Az status=0009 Ze status=0009 02:31:33 Check angles 02:31:33 SkyScan query 02:31:33 SkyScan query done: ret=0 az=116.205<-7747 ze=-130.875<-20725 Statuses=0009 0009 02:31:33 Msec=2250 True Az=116.205 Ze=-130.875 Az status=0009 Ze status=0009 02:31:33 Check angles 02:31:33 SkyScan query 02:31:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 02:31:34 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 02:31:34 Check angles 02:31:34 SkyScan query 02:31:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:31:35 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:31:35 Message to Master queued w/err=0: serial=101930 error=0 02:31:40 Received message from Master: op=Filter serial=101931 02:31:40 Color wheel filter change from 0 to 0 02:31:40 FLIGetFilterPos err=0 currentPosition=0 02:31:40 FLIGetStepsRemaining err=0 RemainingSteps=0 02:31:40 Filter is already there-color wheel unchanged 02:31:40 Received message from Master: op=Shutter serial=101932 02:31:40 Shutter LASER close 02:31:40 Received message from Camera: op=State serial=101934 02:31:40 GetSingleValue result=40 Value=cccccccc 02:31:40 SkyScan query 02:31:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:31:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:40 Parameters OK 02:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:40 Set A/D data flow result=40 02:31:40 Set A/D channel type result=40 02:31:40 Set A/D encoding result=40 02:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:40 Set channel filter=0.000000e+000 result=40 02:31:40 Config A/D Result=40 02:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:40 Get A/D filter: -9.255963e+061 result=40 02:31:40 Get A/D value=-858993460 result=40 02:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:40 Parameters OK 02:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:40 Set A/D data flow result=40 02:31:40 Set A/D channel type result=40 02:31:40 Set A/D encoding result=40 02:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:40 Set channel filter=0.000000e+000 result=40 02:31:40 Config A/D Result=40 02:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:40 Get A/D filter: -9.255963e+061 result=40 02:31:40 Get A/D value=-858993460 result=40 02:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:31:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:31:40 Aux= 02:31:40 Message to Camera, serial 101934 queued 02:32:17 Received message from Master: op=PointingHead serial=101947 02:32:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:32:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:32:18 Point started: ret=0 02:32:18 point_skyscan result=0 02:32:18 Check angles 02:32:18 SkyScan query 02:32:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 02:32:19 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 02:32:19 Check angles 02:32:19 SkyScan query 02:32:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:32:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:32:20 Message to Master queued w/err=0: serial=101947 error=0 02:32:25 Received message from Master: op=Filter serial=101948 02:32:25 Color wheel filter change from 0 to 0 02:32:25 FLIGetFilterPos err=0 currentPosition=0 02:32:25 FLIGetStepsRemaining err=0 RemainingSteps=0 02:32:25 Filter is already there-color wheel unchanged 02:32:25 Received message from Master: op=Shutter serial=101949 02:32:25 Shutter LASER open 02:32:25 Received message from Camera: op=State serial=101951 02:32:25 GetSingleValue result=40 Value=cccccccc 02:32:25 SkyScan query 02:32:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:32:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:26 Parameters OK 02:32:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:26 Set A/D data flow result=40 02:32:26 Set A/D channel type result=40 02:32:26 Set A/D encoding result=40 02:32:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:26 Set channel filter=0.000000e+000 result=40 02:32:26 Config A/D Result=40 02:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:26 Get A/D filter: -9.255963e+061 result=40 02:32:26 Get A/D value=-858993460 result=40 02:32:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:26 Parameters OK 02:32:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:26 Set A/D data flow result=40 02:32:26 Set A/D channel type result=40 02:32:26 Set A/D encoding result=40 02:32:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:26 Set channel filter=0.000000e+000 result=40 02:32:26 Config A/D Result=40 02:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:26 Get A/D filter: -9.255963e+061 result=40 02:32:26 Get A/D value=-858993460 result=40 02:32:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:32:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:32:26 Aux= 02:32:26 Message to Camera, serial 101951 queued 02:32:33 Received message from Master: op=Shutter serial=101960 02:32:33 Shutter LASER close 02:32:34 Received message from Master: op=PointingHead serial=101964 02:32:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:32:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:32:34 Point started: ret=0 02:32:34 point_skyscan result=0 02:32:35 Check angles 02:32:35 SkyScan query 02:32:35 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.355<-21557 Statuses=0009 0009 02:32:35 Msec=0 True Az=135.915 Ze=-143.355 Az status=0009 Ze status=0009 02:32:36 Check angles 02:32:36 SkyScan query 02:32:36 SkyScan query done: ret=0 az=153.66<-10244 ze=-121.95<-20130 Statuses=0009 0009 02:32:36 Msec=750 True Az=153.66 Ze=-121.95 Az status=0009 Ze status=0009 02:32:36 Check angles 02:32:36 SkyScan query 02:32:37 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.53<-18702 Statuses=0009 0009 02:32:37 Msec=1500 True Az=171.525 Ze=-100.53 Az status=0009 Ze status=0009 02:32:37 Check angles 02:32:37 SkyScan query 02:32:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.62<-17308 Statuses=0008 0009 02:32:38 Msec=2250 True Az=176.01 Ze=-79.62 Az status=0008 Ze status=0009 02:32:38 Check angles 02:32:38 SkyScan query 02:32:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 02:32:38 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 02:32:39 Check angles 02:32:39 SkyScan query 02:32:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:32:39 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:32:39 Message to Master queued w/err=0: serial=101964 error=0 02:32:44 Received message from Master: op=Filter serial=101965 02:32:44 Color wheel filter change from 0 to 0 02:32:44 FLIGetFilterPos err=0 currentPosition=0 02:32:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:32:44 Filter is already there-color wheel unchanged 02:32:44 Received message from Master: op=Shutter serial=101966 02:32:44 Shutter LASER close 02:32:45 Received message from Camera: op=State serial=101968 02:32:45 GetSingleValue result=40 Value=cccccccc 02:32:45 SkyScan query 02:32:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:32:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:45 Parameters OK 02:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:45 Set A/D data flow result=40 02:32:45 Set A/D channel type result=40 02:32:45 Set A/D encoding result=40 02:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:45 Set channel filter=0.000000e+000 result=40 02:32:45 Config A/D Result=40 02:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:45 Get A/D filter: -9.255963e+061 result=40 02:32:45 Get A/D value=-858993460 result=40 02:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:45 Parameters OK 02:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:45 Set A/D data flow result=40 02:32:45 Set A/D channel type result=40 02:32:45 Set A/D encoding result=40 02:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:45 Set channel filter=0.000000e+000 result=40 02:32:45 Config A/D Result=40 02:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:45 Get A/D filter: -9.255963e+061 result=40 02:32:45 Get A/D value=-858993460 result=40 02:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:32:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:32:45 Aux= 02:32:45 Message to Camera, serial 101968 queued 02:33:22 Received message from Master: op=PointingHead serial=101981 02:33:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:33:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:33:22 Point started: ret=0 02:33:22 point_skyscan result=0 02:33:23 Check angles 02:33:23 SkyScan query 02:33:24 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.345<-13423 Statuses=0009 0009 02:33:24 Msec=0 True Az=152.73 Ze=-21.345 Az status=0009 Ze status=0009 02:33:24 Check angles 02:33:24 SkyScan query 02:33:24 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.39<-12026 Statuses=0009 0009 02:33:24 Msec=750 True Az=135.195 Ze=-0.39 Az status=0009 Ze status=0009 02:33:25 Check angles 02:33:25 SkyScan query 02:33:25 SkyScan query done: ret=0 az=117.525<-7835 ze=20.55<-10630 Statuses=0009 0009 02:33:25 Msec=1500 True Az=117.525 Ze=20.55 Az status=0009 Ze status=0009 02:33:25 Check angles 02:33:25 SkyScan query 02:33:26 SkyScan query done: ret=0 az=100.305<-6687 ze=41.595<-9227 Statuses=0009 0009 02:33:26 Msec=2250 True Az=100.305 Ze=41.595 Az status=0009 Ze status=0009 02:33:26 Check angles 02:33:26 SkyScan query 02:33:27 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 02:33:27 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 02:33:27 Check angles 02:33:27 SkyScan query 02:33:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:33:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:33:27 Message to Master queued w/err=0: serial=101981 error=0 02:33:32 Received message from Master: op=Filter serial=101982 02:33:32 Color wheel filter change from 0 to 0 02:33:32 FLIGetFilterPos err=0 currentPosition=0 02:33:32 FLIGetStepsRemaining err=0 RemainingSteps=0 02:33:32 Filter is already there-color wheel unchanged 02:33:33 Received message from Master: op=Shutter serial=101983 02:33:33 Shutter LASER close 02:33:33 Received message from Camera: op=State serial=101985 02:33:33 GetSingleValue result=40 Value=cccccccc 02:33:33 SkyScan query 02:33:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:33:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:33 Parameters OK 02:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:33 Set A/D data flow result=40 02:33:33 Set A/D channel type result=40 02:33:33 Set A/D encoding result=40 02:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:33 Set channel filter=0.000000e+000 result=40 02:33:33 Config A/D Result=40 02:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:33 Get A/D filter: -9.255963e+061 result=40 02:33:33 Get A/D value=-858993460 result=40 02:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:33 Parameters OK 02:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:33 Set A/D data flow result=40 02:33:33 Set A/D channel type result=40 02:33:33 Set A/D encoding result=40 02:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:33 Set channel filter=0.000000e+000 result=40 02:33:33 Config A/D Result=40 02:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:33 Get A/D filter: -9.255963e+061 result=40 02:33:33 Get A/D value=-858993460 result=40 02:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:33:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:33:33 Aux= 02:33:33 Message to Camera, serial 101985 queued 02:34:10 Received message from Master: op=PointingHead serial=101998 02:34:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:34:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:34:11 Point started: ret=0 02:34:11 point_skyscan result=0 02:34:11 Check angles 02:34:11 SkyScan query 02:34:12 SkyScan query done: ret=0 az=85.995<-5733 ze=21.615<-10559 Statuses=0008 0009 02:34:12 Msec=0 True Az=85.995 Ze=21.615 Az status=0008 Ze status=0009 02:34:12 Check angles 02:34:12 SkyScan query 02:34:13 SkyScan query done: ret=0 az=85.995<-5733 ze=0.645<-11957 Statuses=0008 0009 02:34:13 Msec=750 True Az=85.995 Ze=0.645 Az status=0008 Ze status=0009 02:34:13 Check angles 02:34:13 SkyScan query 02:34:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.31<-13354 Statuses=0008 0009 02:34:13 Msec=1500 True Az=85.995 Ze=-20.31 Az status=0008 Ze status=0009 02:34:14 Check angles 02:34:14 SkyScan query 02:34:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.25<-14750 Statuses=0008 0009 02:34:14 Msec=2250 True Az=85.995 Ze=-41.25 Az status=0008 Ze status=0009 02:34:14 Check angles 02:34:14 SkyScan query 02:34:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:34:15 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:34:15 Message to Master queued w/err=0: serial=101998 error=0 02:34:20 Received message from Master: op=Filter serial=101999 02:34:20 Color wheel filter change from 0 to 0 02:34:20 FLIGetFilterPos err=0 currentPosition=0 02:34:20 FLIGetStepsRemaining err=0 RemainingSteps=0 02:34:20 Filter is already there-color wheel unchanged 02:34:20 Received message from Master: op=Shutter serial=102000 02:34:20 Shutter LASER close 02:34:20 Received message from Camera: op=State serial=102002 02:34:20 GetSingleValue result=40 Value=cccccccc 02:34:20 SkyScan query 02:34:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:34:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:21 Parameters OK 02:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:21 Set A/D data flow result=40 02:34:21 Set A/D channel type result=40 02:34:21 Set A/D encoding result=40 02:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:21 Set channel filter=0.000000e+000 result=40 02:34:21 Config A/D Result=40 02:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:21 Get A/D filter: -9.255963e+061 result=40 02:34:21 Get A/D value=-858993460 result=40 02:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:21 Parameters OK 02:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:21 Set A/D data flow result=40 02:34:21 Set A/D channel type result=40 02:34:21 Set A/D encoding result=40 02:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:21 Set channel filter=0.000000e+000 result=40 02:34:21 Config A/D Result=40 02:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:21 Get A/D filter: -9.255963e+061 result=40 02:34:21 Get A/D value=-858993460 result=40 02:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:34:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:34:21 Aux= 02:34:21 Message to Camera, serial 102002 queued 02:34:58 Received message from Master: op=PointingHead serial=102015 02:34:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:34:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:34:58 Point started: ret=0 02:34:58 point_skyscan result=0 02:34:59 Check angles 02:34:59 SkyScan query 02:34:59 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.465<-17431 Statuses=0009 0009 02:34:59 Msec=0 True Az=109.155 Ze=-81.465 Az status=0009 Ze status=0009 02:34:59 Check angles 02:34:59 SkyScan query 02:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 02:35:00 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 02:35:00 Check angles 02:35:00 SkyScan query 02:35:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 02:35:01 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 02:35:01 Check angles 02:35:01 SkyScan query 02:35:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 02:35:01 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 02:35:02 Check angles 02:35:02 SkyScan query 02:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.255<-23017 Statuses=0008 0009 02:35:02 Msec=3000 True Az=112.995 Ze=-165.255 Az status=0008 Ze status=0009 02:35:02 Check angles 02:35:02 SkyScan query 02:35:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:35:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:35:03 Message to Master queued w/err=0: serial=102015 error=0 02:35:08 Received message from Master: op=Filter serial=102016 02:35:08 Color wheel filter change from 0 to 0 02:35:08 FLIGetFilterPos err=0 currentPosition=0 02:35:08 FLIGetStepsRemaining err=0 RemainingSteps=0 02:35:08 Filter is already there-color wheel unchanged 02:35:08 Received message from Master: op=Shutter serial=102017 02:35:08 Shutter LASER open 02:35:08 Received message from Camera: op=State serial=102019 02:35:08 GetSingleValue result=40 Value=cccccccc 02:35:08 SkyScan query 02:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:35:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:09 Parameters OK 02:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:09 Set A/D data flow result=40 02:35:09 Set A/D channel type result=40 02:35:09 Set A/D encoding result=40 02:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:09 Set channel filter=0.000000e+000 result=40 02:35:09 Config A/D Result=40 02:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:09 Get A/D filter: -9.255963e+061 result=40 02:35:09 Get A/D value=-858993460 result=40 02:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:09 Parameters OK 02:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:09 Set A/D data flow result=40 02:35:09 Set A/D channel type result=40 02:35:09 Set A/D encoding result=40 02:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:09 Set channel filter=0.000000e+000 result=40 02:35:09 Config A/D Result=40 02:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:09 Get A/D filter: -9.255963e+061 result=40 02:35:09 Get A/D value=-858993460 result=40 02:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:35:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:35:09 Aux= 02:35:09 Message to Camera, serial 102019 queued 02:35:17 Received message from Master: op=Shutter serial=102029 02:35:17 Shutter LASER close 02:35:18 Received message from Master: op=PointingHead serial=102033 02:35:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:35:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-13 02:35:18] 02:35:18 Point started: ret=0 02:35:18 point_skyscan result=0 02:35:19 Check angles 02:35:19 SkyScan query 02:35:20 SkyScan query done: ret=0 az=88.185<-5879 ze=155.085<-1661 Statuses=0009 0009 02:35:20 Msec=0 True Az=88.185 Ze=155.085 Az status=0009 Ze status=0009 02:35:20 Check angles 02:35:20 SkyScan query 02:35:20 SkyScan query done: ret=0 az=70.62<-4708 ze=134.16<-3056 Statuses=0009 0009 02:35:20 Msec=750 True Az=70.62 Ze=134.16 Az status=0009 Ze status=0009 02:35:20 Check angles 02:35:20 SkyScan query 02:35:21 SkyScan query done: ret=0 az=53.22<-3548 ze=113.175<-4455 Statuses=0009 0009 02:35:21 Msec=1500 True Az=53.22 Ze=113.175 Az status=0009 Ze status=0009 02:35:21 Check angles 02:35:21 SkyScan query 02:35:22 SkyScan query done: ret=0 az=41.04<-2736 ze=91.77<-5882 Statuses=0008 0009 02:35:22 Msec=2250 True Az=41.04 Ze=91.77 Az status=0008 Ze status=0009 02:35:22 Check angles 02:35:22 SkyScan query 02:35:23 SkyScan query done: ret=0 az=40.995<-2733 ze=70.83<-7278 Statuses=0008 0009 02:35:23 Msec=3000 True Az=40.995 Ze=70.83 Az status=0008 Ze status=0009 02:35:23 Check angles 02:35:23 SkyScan query 02:35:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.54<-8564 Statuses=0008 0009 02:35:23 Msec=3750 True Az=40.995 Ze=51.54 Az status=0008 Ze status=0009 02:35:23 Check angles 02:35:23 SkyScan query 02:35:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:35:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:35:24 Message to Master queued w/err=0: serial=102033 error=0 02:35:29 Received message from Master: op=Filter serial=102034 02:35:29 Color wheel filter change from 0 to 0 02:35:29 FLIGetFilterPos err=0 currentPosition=0 02:35:29 FLIGetStepsRemaining err=0 RemainingSteps=0 02:35:29 Filter is already there-color wheel unchanged 02:35:29 Received message from Master: op=Shutter serial=102035 02:35:29 Shutter LASER close 02:35:29 Received message from Camera: op=State serial=102037 02:35:29 GetSingleValue result=40 Value=cccccccc 02:35:29 SkyScan query 02:35:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:35:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:30 Parameters OK 02:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:30 Set A/D data flow result=40 02:35:30 Set A/D channel type result=40 02:35:30 Set A/D encoding result=40 02:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:30 Set channel filter=0.000000e+000 result=40 02:35:30 Config A/D Result=40 02:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:30 Get A/D filter: -9.255963e+061 result=40 02:35:30 Get A/D value=-858993460 result=40 02:35:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:30 Parameters OK 02:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:30 Set A/D data flow result=40 02:35:30 Set A/D channel type result=40 02:35:30 Set A/D encoding result=40 02:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:30 Set channel filter=0.000000e+000 result=40 02:35:30 Config A/D Result=40 02:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:30 Get A/D filter: -9.255963e+061 result=40 02:35:30 Get A/D value=-858993460 result=40 02:35:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:35:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:35:30 Aux= 02:35:30 Message to Camera, serial 102037 queued [UTC 2018-12-13 02:35:52] 02:36:07 Received message from Master: op=PointingHead serial=102050 02:36:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:36:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:36:07 Point started: ret=0 02:36:07 point_skyscan result=0 02:36:08 Check angles 02:36:08 SkyScan query 02:36:09 SkyScan query done: ret=0 az=40.995<-2733 ze=21.99<-10534 Statuses=0008 0009 02:36:09 Msec=0 True Az=40.995 Ze=21.99 Az status=0008 Ze status=0009 02:36:09 Check angles 02:36:09 SkyScan query 02:36:09 SkyScan query done: ret=0 az=40.995<-2733 ze=0.6<-11960 Statuses=0008 0009 02:36:09 Msec=750 True Az=40.995 Ze=0.6 Az status=0008 Ze status=0009 02:36:10 Check angles 02:36:10 SkyScan query 02:36:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.355<-13357 Statuses=0008 0009 02:36:10 Msec=1500 True Az=40.995 Ze=-20.355 Az status=0008 Ze status=0009 02:36:10 Check angles 02:36:10 SkyScan query 02:36:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 02:36:11 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 02:36:11 Check angles 02:36:11 SkyScan query 02:36:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:36:12 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:36:12 Message to Master queued w/err=0: serial=102050 error=0 02:36:17 Received message from Master: op=Filter serial=102051 02:36:17 Color wheel filter change from 0 to 0 02:36:17 FLIGetFilterPos err=0 currentPosition=0 02:36:17 FLIGetStepsRemaining err=0 RemainingSteps=0 02:36:17 Filter is already there-color wheel unchanged 02:36:17 Received message from Master: op=Shutter serial=102052 02:36:17 Shutter LASER close 02:36:17 Received message from Camera: op=State serial=102054 02:36:17 GetSingleValue result=40 Value=cccccccc 02:36:17 SkyScan query 02:36:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:36:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:17 Parameters OK 02:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:17 Set A/D data flow result=40 02:36:17 Set A/D channel type result=40 02:36:17 Set A/D encoding result=40 02:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:17 Set channel filter=0.000000e+000 result=40 02:36:17 Config A/D Result=40 02:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:17 Get A/D filter: -9.255963e+061 result=40 02:36:17 Get A/D value=-858993460 result=40 02:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:17 Parameters OK 02:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:17 Set A/D data flow result=40 02:36:17 Set A/D channel type result=40 02:36:17 Set A/D encoding result=40 02:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:17 Set channel filter=0.000000e+000 result=40 02:36:17 Config A/D Result=40 02:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:17 Get A/D filter: -9.255963e+061 result=40 02:36:17 Get A/D value=-858993460 result=40 02:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:36:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:36:17 Aux= 02:36:17 Message to Camera, serial 102054 queued 02:36:54 Received message from Master: op=PointingHead serial=102067 02:36:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:36:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:36:55 Point started: ret=0 02:36:55 point_skyscan result=0 02:36:55 Check angles 02:36:55 SkyScan query 02:36:56 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.235<-16549 Statuses=0009 0009 02:36:56 Msec=0 True Az=63.855 Ze=-68.235 Az status=0009 Ze status=0009 02:36:56 Check angles 02:36:56 SkyScan query 02:36:57 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.67<-17978 Statuses=0009 0009 02:36:57 Msec=750 True Az=81.855 Ze=-89.67 Az status=0009 Ze status=0009 02:36:57 Check angles 02:36:57 SkyScan query 02:36:57 SkyScan query done: ret=0 az=99.765<-6651 ze=-111.06<-19404 Statuses=0009 0009 02:36:57 Msec=1500 True Az=99.765 Ze=-111.06 Az status=0009 Ze status=0009 02:36:58 Check angles 02:36:58 SkyScan query 02:36:58 SkyScan query done: ret=0 az=117.63<-7842 ze=-132.39<-20826 Statuses=0009 0009 02:36:58 Msec=2250 True Az=117.63 Ze=-132.39 Az status=0009 Ze status=0009 02:36:58 Check angles 02:36:58 SkyScan query 02:36:59 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 02:36:59 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 02:36:59 Check angles 02:36:59 SkyScan query 02:37:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:37:00 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:37:00 Message to Master queued w/err=0: serial=102067 error=0 02:37:05 Received message from Master: op=Filter serial=102068 02:37:05 Color wheel filter change from 0 to 0 02:37:05 FLIGetFilterPos err=0 currentPosition=0 02:37:05 FLIGetStepsRemaining err=0 RemainingSteps=0 02:37:05 Filter is already there-color wheel unchanged 02:37:05 Received message from Master: op=Shutter serial=102069 02:37:05 Shutter LASER close 02:37:05 Received message from Camera: op=State serial=102071 02:37:05 GetSingleValue result=40 Value=cccccccc 02:37:05 SkyScan query 02:37:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:37:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:05 Parameters OK 02:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:05 Set A/D data flow result=40 02:37:05 Set A/D channel type result=40 02:37:05 Set A/D encoding result=40 02:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:05 Set channel filter=0.000000e+000 result=40 02:37:05 Config A/D Result=40 02:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:05 Get A/D filter: -9.255963e+061 result=40 02:37:05 Get A/D value=-858993460 result=40 02:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:05 Parameters OK 02:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:05 Set A/D data flow result=40 02:37:05 Set A/D channel type result=40 02:37:05 Set A/D encoding result=40 02:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:05 Set channel filter=0.000000e+000 result=40 02:37:05 Config A/D Result=40 02:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:05 Get A/D filter: -9.255963e+061 result=40 02:37:05 Get A/D value=-858993460 result=40 02:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:37:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:37:05 Aux= 02:37:05 Message to Camera, serial 102071 queued 02:37:42 Received message from Master: op=PointingHead serial=102084 02:37:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:37:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:37:43 Point started: ret=0 02:37:43 point_skyscan result=0 02:37:43 Check angles 02:37:43 SkyScan query 02:37:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 02:37:44 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 02:37:44 Check angles 02:37:44 SkyScan query 02:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:37:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:37:45 Message to Master queued w/err=0: serial=102084 error=0 02:37:50 Received message from Master: op=Filter serial=102085 02:37:50 Color wheel filter change from 0 to 0 02:37:50 FLIGetFilterPos err=0 currentPosition=0 02:37:50 FLIGetStepsRemaining err=0 RemainingSteps=0 02:37:50 Filter is already there-color wheel unchanged 02:37:50 Received message from Master: op=Shutter serial=102086 02:37:50 Shutter LASER open 02:37:50 Received message from Camera: op=State serial=102088 02:37:50 GetSingleValue result=40 Value=cccccccc 02:37:50 SkyScan query 02:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:37:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:51 Parameters OK 02:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:51 Set A/D data flow result=40 02:37:51 Set A/D channel type result=40 02:37:51 Set A/D encoding result=40 02:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:51 Set channel filter=0.000000e+000 result=40 02:37:51 Config A/D Result=40 02:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:51 Get A/D filter: -9.255963e+061 result=40 02:37:51 Get A/D value=-858993460 result=40 02:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:51 Parameters OK 02:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:51 Set A/D data flow result=40 02:37:51 Set A/D channel type result=40 02:37:51 Set A/D encoding result=40 02:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:51 Set channel filter=0.000000e+000 result=40 02:37:51 Config A/D Result=40 02:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:51 Get A/D filter: -9.255963e+061 result=40 02:37:51 Get A/D value=-858993460 result=40 02:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:37:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:37:51 Aux= 02:37:51 Message to Camera, serial 102088 queued 02:37:59 Received message from Master: op=Shutter serial=102098 02:37:59 Shutter LASER close 02:38:00 Received message from Master: op=PointingHead serial=102102 02:38:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:38:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:38:00 Point started: ret=0 02:38:00 point_skyscan result=0 02:38:01 Check angles 02:38:01 SkyScan query 02:38:01 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.875<-21525 Statuses=0009 0009 02:38:01 Msec=0 True Az=136.23 Ze=-142.875 Az status=0009 Ze status=0009 02:38:02 Check angles 02:38:02 SkyScan query 02:38:02 SkyScan query done: ret=0 az=154.065<-10271 ze=-121.515<-20101 Statuses=0009 0009 02:38:02 Msec=750 True Az=154.065 Ze=-121.515 Az status=0009 Ze status=0009 02:38:02 Check angles 02:38:02 SkyScan query 02:38:03 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.365<-18691 Statuses=0009 0009 02:38:03 Msec=1500 True Az=171.585 Ze=-100.365 Az status=0009 Ze status=0009 02:38:03 Check angles 02:38:03 SkyScan query 02:38:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 02:38:04 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 02:38:04 Check angles 02:38:04 SkyScan query 02:38:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.605<-15907 Statuses=0008 0009 02:38:04 Msec=3000 True Az=176.01 Ze=-58.605 Az status=0008 Ze status=0009 02:38:05 Check angles 02:38:05 SkyScan query 02:38:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 02:38:05 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 02:38:05 Message to Master queued w/err=0: serial=102102 error=0 02:38:10 Received message from Master: op=Filter serial=102103 02:38:10 Color wheel filter change from 0 to 0 02:38:10 FLIGetFilterPos err=0 currentPosition=0 02:38:10 FLIGetStepsRemaining err=0 RemainingSteps=0 02:38:10 Filter is already there-color wheel unchanged 02:38:10 Received message from Master: op=Shutter serial=102104 02:38:10 Shutter LASER close 02:38:11 Received message from Camera: op=State serial=102106 02:38:11 GetSingleValue result=40 Value=cccccccc 02:38:11 SkyScan query 02:38:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:38:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:11 Parameters OK 02:38:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:11 Set A/D data flow result=40 02:38:11 Set A/D channel type result=40 02:38:11 Set A/D encoding result=40 02:38:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:11 Set channel filter=0.000000e+000 result=40 02:38:11 Config A/D Result=40 02:38:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:11 Get A/D filter: -9.255963e+061 result=40 02:38:11 Get A/D value=-858993460 result=40 02:38:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:11 Parameters OK 02:38:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:11 Set A/D data flow result=40 02:38:11 Set A/D channel type result=40 02:38:11 Set A/D encoding result=40 02:38:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:11 Set channel filter=0.000000e+000 result=40 02:38:11 Config A/D Result=40 02:38:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:11 Get A/D filter: -9.255963e+061 result=40 02:38:11 Get A/D value=-858993460 result=40 02:38:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:38:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:38:11 Aux= 02:38:11 Message to Camera, serial 102106 queued 02:38:48 Received message from Master: op=PointingHead serial=102119 02:38:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:38:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:38:48 Point started: ret=0 02:38:48 point_skyscan result=0 02:38:49 Check angles 02:38:49 SkyScan query 02:38:50 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.975<-13465 Statuses=0009 0009 02:38:50 Msec=0 True Az=153.165 Ze=-21.975 Az status=0009 Ze status=0009 02:38:50 Check angles 02:38:50 SkyScan query 02:38:50 SkyScan query done: ret=0 az=135.33<-9022 ze=-0.54<-12036 Statuses=0009 0009 02:38:50 Msec=750 True Az=135.33 Ze=-0.54 Az status=0009 Ze status=0009 02:38:51 Check angles 02:38:51 SkyScan query 02:38:51 SkyScan query done: ret=0 az=117.435<-7829 ze=20.88<-10608 Statuses=0009 0009 02:38:51 Msec=1500 True Az=117.435 Ze=20.88 Az status=0009 Ze status=0009 02:38:51 Check angles 02:38:51 SkyScan query 02:38:52 SkyScan query done: ret=0 az=100.05<-6670 ze=41.82<-9212 Statuses=0009 0009 02:38:52 Msec=2250 True Az=100.05 Ze=41.82 Az status=0009 Ze status=0009 02:38:52 Check angles 02:38:52 SkyScan query 02:38:53 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 02:38:53 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 02:38:53 Check angles 02:38:53 SkyScan query 02:38:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:38:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:38:53 Message to Master queued w/err=0: serial=102119 error=0 02:38:58 Received message from Master: op=Filter serial=102120 02:38:58 Color wheel filter change from 0 to 0 02:38:58 FLIGetFilterPos err=0 currentPosition=0 02:38:58 FLIGetStepsRemaining err=0 RemainingSteps=0 02:38:58 Filter is already there-color wheel unchanged 02:38:59 Received message from Master: op=Shutter serial=102121 02:38:59 Shutter LASER close 02:38:59 Received message from Camera: op=State serial=102123 02:38:59 GetSingleValue result=40 Value=cccccccc 02:38:59 SkyScan query 02:38:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:38:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:59 Parameters OK 02:38:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:59 Set A/D data flow result=40 02:38:59 Set A/D channel type result=40 02:38:59 Set A/D encoding result=40 02:38:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:59 Set channel filter=0.000000e+000 result=40 02:38:59 Config A/D Result=40 02:38:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:59 Get A/D filter: -9.255963e+061 result=40 02:38:59 Get A/D value=-858993460 result=40 02:38:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:59 Parameters OK 02:38:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:59 Set A/D data flow result=40 02:38:59 Set A/D channel type result=40 02:38:59 Set A/D encoding result=40 02:38:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:59 Set channel filter=0.000000e+000 result=40 02:38:59 Config A/D Result=40 02:38:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:59 Get A/D filter: -9.255963e+061 result=40 02:38:59 Get A/D value=-858993460 result=40 02:38:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:38:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:38:59 Aux= 02:38:59 Message to Camera, serial 102123 queued 02:39:36 Received message from Master: op=PointingHead serial=102136 02:39:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:39:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:39:36 Point started: ret=0 02:39:36 point_skyscan result=0 02:39:37 Check angles 02:39:37 SkyScan query 02:39:38 SkyScan query done: ret=0 az=85.995<-5733 ze=21.21<-10586 Statuses=0008 0009 02:39:38 Msec=0 True Az=85.995 Ze=21.21 Az status=0008 Ze status=0009 02:39:38 Check angles 02:39:38 SkyScan query 02:39:39 SkyScan query done: ret=0 az=85.995<-5733 ze=0.27<-11982 Statuses=0008 0009 02:39:39 Msec=750 True Az=85.995 Ze=0.27 Az status=0008 Ze status=0009 02:39:39 Check angles 02:39:39 SkyScan query 02:39:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.685<-13379 Statuses=0008 0009 02:39:39 Msec=1500 True Az=85.995 Ze=-20.685 Az status=0008 Ze status=0009 02:39:39 Check angles 02:39:39 SkyScan query 02:39:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.09<-14806 Statuses=0008 0009 02:39:40 Msec=2250 True Az=85.995 Ze=-42.09 Az status=0008 Ze status=0009 02:39:40 Check angles 02:39:40 SkyScan query 02:39:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:39:41 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:39:41 Message to Master queued w/err=0: serial=102136 error=0 02:39:46 Received message from Master: op=Filter serial=102137 02:39:46 Color wheel filter change from 0 to 0 02:39:46 FLIGetFilterPos err=0 currentPosition=0 02:39:46 FLIGetStepsRemaining err=0 RemainingSteps=0 02:39:46 Filter is already there-color wheel unchanged 02:39:46 Received message from Master: op=Shutter serial=102138 02:39:46 Shutter LASER close 02:39:46 Received message from Camera: op=State serial=102140 02:39:46 GetSingleValue result=40 Value=cccccccc 02:39:46 SkyScan query 02:39:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:39:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:47 Parameters OK 02:39:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:47 Set A/D data flow result=40 02:39:47 Set A/D channel type result=40 02:39:47 Set A/D encoding result=40 02:39:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:47 Set channel filter=0.000000e+000 result=40 02:39:47 Config A/D Result=40 02:39:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:47 Get A/D filter: -9.255963e+061 result=40 02:39:47 Get A/D value=-858993460 result=40 02:39:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:47 Parameters OK 02:39:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:47 Set A/D data flow result=40 02:39:47 Set A/D channel type result=40 02:39:47 Set A/D encoding result=40 02:39:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:47 Set channel filter=0.000000e+000 result=40 02:39:47 Config A/D Result=40 02:39:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:47 Get A/D filter: -9.255963e+061 result=40 02:39:47 Get A/D value=-858993460 result=40 02:39:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:39:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:39:47 Aux= 02:39:47 Message to Camera, serial 102140 queued 02:40:23 Received message from Master: op=PointingHead serial=102153 02:40:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:40:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:40:24 Point started: ret=0 02:40:24 point_skyscan result=0 02:40:25 Check angles 02:40:25 SkyScan query 02:40:25 SkyScan query done: ret=0 az=109.275<-7285 ze=-81.63<-17442 Statuses=0009 0009 02:40:25 Msec=0 True Az=109.275 Ze=-81.63 Az status=0009 Ze status=0009 02:40:25 Check angles 02:40:25 SkyScan query 02:40:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 02:40:26 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 02:40:26 Check angles 02:40:26 SkyScan query 02:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.96<-20264 Statuses=0008 0009 02:40:27 Msec=1500 True Az=112.995 Ze=-123.96 Az status=0008 Ze status=0009 02:40:27 Check angles 02:40:27 SkyScan query 02:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.365<-21691 Statuses=0008 0009 02:40:27 Msec=2250 True Az=112.995 Ze=-145.365 Az status=0008 Ze status=0009 02:40:28 Check angles 02:40:28 SkyScan query 02:40:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.77<-23118 Statuses=0008 0009 02:40:28 Msec=3000 True Az=112.995 Ze=-166.77 Az status=0008 Ze status=0009 02:40:28 Check angles 02:40:28 SkyScan query 02:40:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:40:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:40:29 Message to Master queued w/err=0: serial=102153 error=0 02:40:34 Received message from Master: op=Filter serial=102154 02:40:34 Color wheel filter change from 0 to 0 02:40:34 FLIGetFilterPos err=0 currentPosition=0 02:40:34 FLIGetStepsRemaining err=0 RemainingSteps=0 02:40:34 Filter is already there-color wheel unchanged 02:40:34 Received message from Master: op=Shutter serial=102155 02:40:34 Shutter LASER open 02:40:34 Received message from Camera: op=State serial=102157 02:40:34 GetSingleValue result=40 Value=cccccccc 02:40:34 SkyScan query 02:40:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:40:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:35 Parameters OK 02:40:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:35 Set A/D data flow result=40 02:40:35 Set A/D channel type result=40 02:40:35 Set A/D encoding result=40 02:40:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:35 Set channel filter=0.000000e+000 result=40 02:40:35 Config A/D Result=40 02:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:35 Get A/D filter: -9.255963e+061 result=40 02:40:35 Get A/D value=-858993460 result=40 02:40:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:35 Parameters OK 02:40:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:35 Set A/D data flow result=40 02:40:35 Set A/D channel type result=40 02:40:35 Set A/D encoding result=40 02:40:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:35 Set channel filter=0.000000e+000 result=40 02:40:35 Config A/D Result=40 02:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:35 Get A/D filter: -9.255963e+061 result=40 02:40:35 Get A/D value=-858993460 result=40 02:40:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:40:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:40:35 Aux= 02:40:35 Message to Camera, serial 102157 queued 02:40:42 Received message from Master: op=Shutter serial=102166 02:40:42 Shutter LASER close 02:40:43 Received message from Master: op=PointingHead serial=102170 02:40:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:40:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:40:43 Point started: ret=0 02:40:43 point_skyscan result=0 02:40:44 Check angles 02:40:44 SkyScan query 02:40:45 SkyScan query done: ret=0 az=89.79<-5986 ze=157.26<-1516 Statuses=0009 0009 02:40:45 Msec=0 True Az=89.79 Ze=157.26 Az status=0009 Ze status=0009 02:40:45 Check angles 02:40:45 SkyScan query 02:40:45 SkyScan query done: ret=0 az=72.405<-4827 ze=136.305<-2913 Statuses=0009 0009 02:40:45 Msec=750 True Az=72.405 Ze=136.305 Az status=0009 Ze status=0009 02:40:46 Check angles 02:40:46 SkyScan query 02:40:46 SkyScan query done: ret=0 az=54.885<-3659 ze=115.38<-4308 Statuses=0009 0009 02:40:46 Msec=1500 True Az=54.885 Ze=115.38 Az status=0009 Ze status=0009 02:40:46 Check angles 02:40:46 SkyScan query 02:40:47 SkyScan query done: ret=0 az=40.86<-2724 ze=94.395<-5707 Statuses=0009 0009 02:40:47 Msec=2250 True Az=40.86 Ze=94.395 Az status=0009 Ze status=0009 02:40:47 Check angles 02:40:47 SkyScan query 02:40:48 SkyScan query done: ret=0 az=40.995<-2733 ze=73.455<-7103 Statuses=0008 0009 02:40:48 Msec=3000 True Az=40.995 Ze=73.455 Az status=0008 Ze status=0009 02:40:48 Check angles 02:40:48 SkyScan query 02:40:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 02:40:48 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 02:40:49 Check angles 02:40:49 SkyScan query 02:40:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:40:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:40:49 Message to Master queued w/err=0: serial=102170 error=0 02:40:54 Received message from Master: op=Filter serial=102171 02:40:54 Color wheel filter change from 0 to 0 02:40:54 FLIGetFilterPos err=0 currentPosition=0 02:40:54 FLIGetStepsRemaining err=0 RemainingSteps=0 02:40:54 Filter is already there-color wheel unchanged 02:40:54 Received message from Master: op=Shutter serial=102172 02:40:54 Shutter LASER close 02:40:55 Received message from Camera: op=State serial=102174 02:40:55 GetSingleValue result=40 Value=cccccccc 02:40:55 SkyScan query 02:40:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:40:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:55 Parameters OK 02:40:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:55 Set A/D data flow result=40 02:40:55 Set A/D channel type result=40 02:40:55 Set A/D encoding result=40 02:40:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:55 Set channel filter=0.000000e+000 result=40 02:40:55 Config A/D Result=40 02:40:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:55 Get A/D filter: -9.255963e+061 result=40 02:40:55 Get A/D value=-858993460 result=40 02:40:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:55 Parameters OK 02:40:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:55 Set A/D data flow result=40 02:40:55 Set A/D channel type result=40 02:40:55 Set A/D encoding result=40 02:40:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:55 Set channel filter=0.000000e+000 result=40 02:40:55 Config A/D Result=40 02:40:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:55 Get A/D filter: -9.255963e+061 result=40 02:40:55 Get A/D value=-858993460 result=40 02:40:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:40:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:40:55 Aux= 02:40:55 Message to Camera, serial 102174 queued 02:41:32 Received message from Master: op=PointingHead serial=102187 02:41:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:41:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:41:32 Point started: ret=0 02:41:32 point_skyscan result=0 02:41:33 Check angles 02:41:33 SkyScan query 02:41:34 SkyScan query done: ret=0 az=40.995<-2733 ze=21.675<-10555 Statuses=0008 0009 02:41:34 Msec=0 True Az=40.995 Ze=21.675 Az status=0008 Ze status=0009 02:41:34 Check angles 02:41:34 SkyScan query 02:41:35 SkyScan query done: ret=0 az=40.995<-2733 ze=0.72<-11952 Statuses=0008 0009 02:41:35 Msec=750 True Az=40.995 Ze=0.72 Az status=0008 Ze status=0009 02:41:35 Check angles 02:41:35 SkyScan query 02:41:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.235<-13349 Statuses=0008 0009 02:41:35 Msec=1500 True Az=40.995 Ze=-20.235 Az status=0008 Ze status=0009 02:41:35 Check angles 02:41:35 SkyScan query 02:41:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 02:41:36 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 02:41:36 Check angles 02:41:36 SkyScan query 02:41:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:41:37 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:41:37 Message to Master queued w/err=0: serial=102187 error=0 02:41:42 Received message from Master: op=Filter serial=102188 02:41:42 Color wheel filter change from 0 to 0 02:41:42 FLIGetFilterPos err=0 currentPosition=0 02:41:42 FLIGetStepsRemaining err=0 RemainingSteps=0 02:41:42 Filter is already there-color wheel unchanged 02:41:42 Received message from Master: op=Shutter serial=102189 02:41:42 Shutter LASER close 02:41:42 Received message from Camera: op=State serial=102191 02:41:42 GetSingleValue result=40 Value=cccccccc 02:41:42 SkyScan query 02:41:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:41:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:43 Parameters OK 02:41:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:43 Set A/D data flow result=40 02:41:43 Set A/D channel type result=40 02:41:43 Set A/D encoding result=40 02:41:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:43 Set channel filter=0.000000e+000 result=40 02:41:43 Config A/D Result=40 02:41:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:43 Get A/D filter: -9.255963e+061 result=40 02:41:43 Get A/D value=-858993460 result=40 02:41:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:43 Parameters OK 02:41:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:43 Set A/D data flow result=40 02:41:43 Set A/D channel type result=40 02:41:43 Set A/D encoding result=40 02:41:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:43 Set channel filter=0.000000e+000 result=40 02:41:43 Config A/D Result=40 02:41:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:43 Get A/D filter: -9.255963e+061 result=40 02:41:43 Get A/D value=-858993460 result=40 02:41:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:41:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:41:43 Aux= 02:41:43 Message to Camera, serial 102191 queued 02:42:19 Received message from Master: op=PointingHead serial=102203 02:42:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:42:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:42:19 Point started: ret=0 02:42:19 point_skyscan result=0 02:42:20 Check angles 02:42:20 SkyScan query 02:42:20 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.07<-16538 Statuses=0009 0009 02:42:20 Msec=0 True Az=63.765 Ze=-68.07 Az status=0009 Ze status=0009 02:42:20 Check angles 02:42:20 SkyScan query 02:42:21 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.58<-17972 Statuses=0009 0009 02:42:21 Msec=750 True Az=81.81 Ze=-89.58 Az status=0009 Ze status=0009 02:42:21 Check angles 02:42:21 SkyScan query 02:42:22 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.895<-19393 Statuses=0009 0009 02:42:22 Msec=1500 True Az=99.585 Ze=-110.895 Az status=0009 Ze status=0009 02:42:22 Check angles 02:42:22 SkyScan query 02:42:22 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.82<-20788 Statuses=0009 0009 02:42:22 Msec=2250 True Az=116.985 Ze=-131.82 Az status=0009 Ze status=0009 02:42:23 Check angles 02:42:23 SkyScan query 02:42:23 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 02:42:23 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 02:42:23 Check angles 02:42:23 SkyScan query 02:42:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:42:24 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:42:24 Message to Master queued w/err=0: serial=102203 error=0 02:42:29 Received message from Master: op=Filter serial=102204 02:42:29 Color wheel filter change from 0 to 0 02:42:29 FLIGetFilterPos err=0 currentPosition=0 02:42:29 FLIGetStepsRemaining err=0 RemainingSteps=0 02:42:29 Filter is already there-color wheel unchanged 02:42:29 Received message from Master: op=Shutter serial=102205 02:42:29 Shutter LASER close 02:42:29 Received message from Camera: op=State serial=102207 02:42:29 GetSingleValue result=40 Value=cccccccc 02:42:29 SkyScan query 02:42:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:42:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:30 Parameters OK 02:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:30 Set A/D data flow result=40 02:42:30 Set A/D channel type result=40 02:42:30 Set A/D encoding result=40 02:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:30 Set channel filter=0.000000e+000 result=40 02:42:30 Config A/D Result=40 02:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:30 Get A/D filter: -9.255963e+061 result=40 02:42:30 Get A/D value=-858993460 result=40 02:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:30 Parameters OK 02:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:30 Set A/D data flow result=40 02:42:30 Set A/D channel type result=40 02:42:30 Set A/D encoding result=40 02:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:30 Set channel filter=0.000000e+000 result=40 02:42:30 Config A/D Result=40 02:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:30 Get A/D filter: -9.255963e+061 result=40 02:42:30 Get A/D value=-858993460 result=40 02:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:42:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:42:30 Aux= 02:42:30 Message to Camera, serial 102207 queued 02:43:07 Received message from Master: op=PointingHead serial=102220 02:43:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:43:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:43:07 Point started: ret=0 02:43:07 point_skyscan result=0 02:43:08 Check angles 02:43:08 SkyScan query 02:43:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 02:43:08 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 02:43:08 Check angles 02:43:08 SkyScan query 02:43:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:43:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:43:09 Message to Master queued w/err=0: serial=102220 error=0 02:43:14 Received message from Master: op=Filter serial=102221 02:43:14 Color wheel filter change from 0 to 0 02:43:14 FLIGetFilterPos err=0 currentPosition=0 02:43:14 FLIGetStepsRemaining err=0 RemainingSteps=0 02:43:14 Filter is already there-color wheel unchanged 02:43:14 Received message from Master: op=Shutter serial=102222 02:43:14 Shutter LASER open 02:43:14 Received message from Camera: op=State serial=102224 02:43:14 GetSingleValue result=40 Value=cccccccc 02:43:14 SkyScan query 02:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:43:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:15 Parameters OK 02:43:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:15 Set A/D data flow result=40 02:43:15 Set A/D channel type result=40 02:43:15 Set A/D encoding result=40 02:43:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:15 Set channel filter=0.000000e+000 result=40 02:43:15 Config A/D Result=40 02:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:15 Get A/D filter: -9.255963e+061 result=40 02:43:15 Get A/D value=-858993460 result=40 02:43:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:15 Parameters OK 02:43:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:15 Set A/D data flow result=40 02:43:15 Set A/D channel type result=40 02:43:15 Set A/D encoding result=40 02:43:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:15 Set channel filter=0.000000e+000 result=40 02:43:15 Config A/D Result=40 02:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:15 Get A/D filter: -9.255963e+061 result=40 02:43:15 Get A/D value=-858993460 result=40 02:43:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:43:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:43:15 Aux= 02:43:15 Message to Camera, serial 102224 queued 02:43:23 Received message from Master: op=Shutter serial=102234 02:43:23 Shutter LASER close 02:43:24 Received message from Master: op=PointingHead serial=102238 02:43:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:43:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:43:24 Point started: ret=0 02:43:24 point_skyscan result=0 02:43:25 Check angles 02:43:25 SkyScan query 02:43:26 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.055<-21537 Statuses=0009 0009 02:43:26 Msec=0 True Az=136.17 Ze=-143.055 Az status=0009 Ze status=0009 02:43:26 Check angles 02:43:26 SkyScan query 02:43:26 SkyScan query done: ret=0 az=154.05<-10270 ze=-121.665<-20111 Statuses=0009 0009 02:43:26 Msec=750 True Az=154.05 Ze=-121.665 Az status=0009 Ze status=0009 02:43:27 Check angles 02:43:27 SkyScan query 02:43:27 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.68<-18712 Statuses=0009 0009 02:43:27 Msec=1500 True Az=171.45 Ze=-100.68 Az status=0009 Ze status=0009 02:43:27 Check angles 02:43:27 SkyScan query 02:43:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.32<-17288 Statuses=0008 0009 02:43:28 Msec=2250 True Az=176.01 Ze=-79.32 Az status=0008 Ze status=0009 02:43:28 Check angles 02:43:28 SkyScan query 02:43:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.945<-15863 Statuses=0008 0009 02:43:29 Msec=3000 True Az=176.01 Ze=-57.945 Az status=0008 Ze status=0009 02:43:29 Check angles 02:43:29 SkyScan query 02:43:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:43:29 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:43:29 Message to Master queued w/err=0: serial=102238 error=0 02:43:34 Received message from Master: op=Filter serial=102239 02:43:34 Color wheel filter change from 0 to 0 02:43:34 FLIGetFilterPos err=0 currentPosition=0 02:43:34 FLIGetStepsRemaining err=0 RemainingSteps=0 02:43:34 Filter is already there-color wheel unchanged 02:43:35 Received message from Master: op=Shutter serial=102240 02:43:35 Shutter LASER close 02:43:35 Received message from Camera: op=State serial=102242 02:43:35 GetSingleValue result=40 Value=cccccccc 02:43:35 SkyScan query 02:43:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:43:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:35 Parameters OK 02:43:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:35 Set A/D data flow result=40 02:43:35 Set A/D channel type result=40 02:43:35 Set A/D encoding result=40 02:43:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:35 Set channel filter=0.000000e+000 result=40 02:43:35 Config A/D Result=40 02:43:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:35 Get A/D filter: -9.255963e+061 result=40 02:43:35 Get A/D value=-858993460 result=40 02:43:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:35 Parameters OK 02:43:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:35 Set A/D data flow result=40 02:43:35 Set A/D channel type result=40 02:43:35 Set A/D encoding result=40 02:43:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:35 Set channel filter=0.000000e+000 result=40 02:43:35 Config A/D Result=40 02:43:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:35 Get A/D filter: -9.255963e+061 result=40 02:43:35 Get A/D value=-858993460 result=40 02:43:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:43:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:43:35 Aux= 02:43:35 Message to Camera, serial 102242 queued 02:44:12 Received message from Master: op=PointingHead serial=102255 02:44:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:44:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:44:13 Point started: ret=0 02:44:13 point_skyscan result=0 02:44:13 Check angles 02:44:13 SkyScan query 02:44:14 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.675<-13445 Statuses=0009 0009 02:44:14 Msec=0 True Az=152.955 Ze=-21.675 Az status=0009 Ze status=0009 02:44:14 Check angles 02:44:14 SkyScan query 02:44:15 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.675<-12045 Statuses=0009 0009 02:44:15 Msec=750 True Az=135.405 Ze=-0.675 Az status=0009 Ze status=0009 02:44:15 Check angles 02:44:15 SkyScan query 02:44:15 SkyScan query done: ret=0 az=118.02<-7868 ze=20.25<-10650 Statuses=0009 0009 02:44:15 Msec=1500 True Az=118.02 Ze=20.25 Az status=0009 Ze status=0009 02:44:16 Check angles 02:44:16 SkyScan query 02:44:16 SkyScan query done: ret=0 az=100.575<-6705 ze=41.25<-9250 Statuses=0009 0009 02:44:16 Msec=2250 True Az=100.575 Ze=41.25 Az status=0009 Ze status=0009 02:44:16 Check angles 02:44:16 SkyScan query 02:44:17 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:44:17 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:44:17 Check angles 02:44:17 SkyScan query 02:44:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:44:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:44:18 Message to Master queued w/err=0: serial=102255 error=0 02:44:23 Received message from Master: op=Filter serial=102256 02:44:23 Color wheel filter change from 0 to 0 02:44:23 FLIGetFilterPos err=0 currentPosition=0 02:44:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:44:23 Filter is already there-color wheel unchanged 02:44:23 Received message from Master: op=Shutter serial=102257 02:44:23 Shutter LASER close 02:44:23 Received message from Camera: op=State serial=102259 02:44:23 GetSingleValue result=40 Value=cccccccc 02:44:23 SkyScan query 02:44:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:44:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:23 Parameters OK 02:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:23 Set A/D data flow result=40 02:44:23 Set A/D channel type result=40 02:44:23 Set A/D encoding result=40 02:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:23 Set channel filter=0.000000e+000 result=40 02:44:23 Config A/D Result=40 02:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:23 Get A/D filter: -9.255963e+061 result=40 02:44:23 Get A/D value=-858993460 result=40 02:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:23 Parameters OK 02:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:23 Set A/D data flow result=40 02:44:23 Set A/D channel type result=40 02:44:23 Set A/D encoding result=40 02:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:23 Set channel filter=0.000000e+000 result=40 02:44:23 Config A/D Result=40 02:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:23 Get A/D filter: -9.255963e+061 result=40 02:44:23 Get A/D value=-858993460 result=40 02:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:44:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:44:23 Aux= 02:44:23 Message to Camera, serial 102259 queued 02:45:00 Received message from Master: op=PointingHead serial=102272 02:45:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:45:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:45:01 Point started: ret=0 02:45:01 point_skyscan result=0 02:45:01 Check angles 02:45:01 SkyScan query 02:45:02 SkyScan query done: ret=0 az=85.995<-5733 ze=21.855<-10543 Statuses=0008 0009 02:45:02 Msec=0 True Az=85.995 Ze=21.855 Az status=0008 Ze status=0009 02:45:02 Check angles 02:45:02 SkyScan query 02:45:03 SkyScan query done: ret=0 az=85.995<-5733 ze=0.93<-11938 Statuses=0008 0009 02:45:03 Msec=750 True Az=85.995 Ze=0.93 Az status=0008 Ze status=0009 02:45:03 Check angles 02:45:03 SkyScan query 02:45:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.49<-13366 Statuses=0008 0009 02:45:04 Msec=1500 True Az=85.995 Ze=-20.49 Az status=0008 Ze status=0009 02:45:04 Check angles 02:45:04 SkyScan query 02:45:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.415<-14761 Statuses=0008 0009 02:45:04 Msec=2250 True Az=85.995 Ze=-41.415 Az status=0008 Ze status=0009 02:45:04 Check angles 02:45:04 SkyScan query 02:45:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:45:05 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:45:05 Message to Master queued w/err=0: serial=102272 error=0 02:45:10 Received message from Master: op=Filter serial=102273 02:45:10 Color wheel filter change from 0 to 0 02:45:10 FLIGetFilterPos err=0 currentPosition=0 02:45:10 FLIGetStepsRemaining err=0 RemainingSteps=0 02:45:10 Filter is already there-color wheel unchanged 02:45:10 Received message from Master: op=Shutter serial=102274 02:45:10 Shutter LASER close 02:45:10 Received message from Camera: op=State serial=102276 02:45:10 GetSingleValue result=40 Value=cccccccc 02:45:10 SkyScan query 02:45:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:45:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:11 Parameters OK 02:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:11 Set A/D data flow result=40 02:45:11 Set A/D channel type result=40 02:45:11 Set A/D encoding result=40 02:45:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:11 Set channel filter=0.000000e+000 result=40 02:45:11 Config A/D Result=40 02:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:11 Get A/D filter: -9.255963e+061 result=40 02:45:11 Get A/D value=-858993460 result=40 02:45:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:11 Parameters OK 02:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:11 Set A/D data flow result=40 02:45:11 Set A/D channel type result=40 02:45:11 Set A/D encoding result=40 02:45:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:11 Set channel filter=0.000000e+000 result=40 02:45:11 Config A/D Result=40 02:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:11 Get A/D filter: -9.255963e+061 result=40 02:45:11 Get A/D value=-858993460 result=40 02:45:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:45:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:45:11 Aux= 02:45:11 Message to Camera, serial 102276 queued 02:45:27 Received message from Master: op=Identify serial=102277 02:45:48 Received message from Master: op=PointingHead serial=102292 02:45:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:45:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:45:48 Point started: ret=0 02:45:48 point_skyscan result=0 02:45:49 Check angles 02:45:49 SkyScan query 02:45:49 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.51<-17434 Statuses=0009 0009 02:45:49 Msec=0 True Az=109.215 Ze=-81.51 Az status=0009 Ze status=0009 02:45:49 Check angles 02:45:49 SkyScan query 02:45:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.915<-18861 Statuses=0008 0009 02:45:50 Msec=750 True Az=112.995 Ze=-102.915 Az status=0008 Ze status=0009 02:45:50 Check angles 02:45:50 SkyScan query 02:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 02:45:51 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 02:45:51 Check angles 02:45:51 SkyScan query 02:45:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 02:45:52 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 02:45:52 Check angles 02:45:52 SkyScan query 02:45:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.155<-23077 Statuses=0008 0009 02:45:52 Msec=3000 True Az=112.995 Ze=-166.155 Az status=0008 Ze status=0009 02:45:53 Check angles 02:45:53 SkyScan query 02:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:45:53 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:45:53 Message to Master queued w/err=0: serial=102292 error=0 02:45:58 Received message from Master: op=Filter serial=102293 02:45:58 Color wheel filter change from 0 to 0 02:45:58 FLIGetFilterPos err=0 currentPosition=0 02:45:58 FLIGetStepsRemaining err=0 RemainingSteps=0 02:45:58 Filter is already there-color wheel unchanged 02:45:58 Received message from Master: op=Shutter serial=102294 02:45:58 Shutter LASER open 02:45:58 Received message from Camera: op=State serial=102296 02:45:58 GetSingleValue result=40 Value=cccccccc 02:45:58 SkyScan query 02:45:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:45:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2018-12-13 02:45:59] 02:45:59 Parameters OK 02:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:59 Set A/D data flow result=40 02:45:59 Set A/D channel type result=40 02:45:59 Set A/D encoding result=40 02:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:59 Set channel filter=0.000000e+000 result=40 02:45:59 Config A/D Result=40 02:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:59 Get A/D filter: -9.255963e+061 result=40 02:45:59 Get A/D value=-858993460 result=40 02:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:59 Parameters OK 02:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:59 Set A/D data flow result=40 02:45:59 Set A/D channel type result=40 02:45:59 Set A/D encoding result=40 02:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:59 Set channel filter=0.000000e+000 result=40 02:45:59 Config A/D Result=40 02:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:59 Get A/D filter: -9.255963e+061 result=40 02:45:59 Get A/D value=-858993460 result=40 02:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:45:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:45:59 Aux= 02:45:59 Message to Camera, serial 102296 queued 02:46:08 Received message from Master: op=Shutter serial=102306 02:46:08 Shutter LASER close 02:46:08 Received message from Master: op=PointingHead serial=102310 02:46:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:46:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:46:08 Point started: ret=0 02:46:08 point_skyscan result=0 02:46:09 Check angles 02:46:09 SkyScan query 02:46:10 SkyScan query done: ret=0 az=90.12<-6008 ze=157.47<-1502 Statuses=0009 0009 02:46:10 Msec=0 True Az=90.12 Ze=157.47 Az status=0009 Ze status=0009 02:46:10 Check angles 02:46:10 SkyScan query 02:46:10 SkyScan query done: ret=0 az=72.675<-4845 ze=136.485<-2901 Statuses=0009 0009 02:46:10 Msec=750 True Az=72.675 Ze=136.485 Az status=0009 Ze status=0009 02:46:11 Check angles 02:46:11 SkyScan query 02:46:11 SkyScan query done: ret=0 az=55.125<-3675 ze=115.575<-4295 Statuses=0009 0009 02:46:11 Msec=1500 True Az=55.125 Ze=115.575 Az status=0009 Ze status=0009 02:46:11 Check angles 02:46:11 SkyScan query 02:46:12 SkyScan query done: ret=0 az=40.875<-2725 ze=94.59<-5694 Statuses=0009 0009 02:46:12 Msec=2250 True Az=40.875 Ze=94.59 Az status=0009 Ze status=0009 02:46:12 Check angles 02:46:12 SkyScan query 02:46:13 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 02:46:13 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 02:46:13 Check angles 02:46:13 SkyScan query 02:46:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 02:46:13 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 02:46:14 Check angles 02:46:14 SkyScan query 02:46:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:46:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:46:14 Message to Master queued w/err=0: serial=102310 error=0 02:46:19 Received message from Master: op=Filter serial=102311 02:46:19 Color wheel filter change from 0 to 0 02:46:19 FLIGetFilterPos err=0 currentPosition=0 02:46:19 FLIGetStepsRemaining err=0 RemainingSteps=0 02:46:19 Filter is already there-color wheel unchanged 02:46:19 Received message from Master: op=Shutter serial=102312 02:46:19 Shutter LASER close 02:46:19 Received message from Camera: op=State serial=102314 02:46:19 GetSingleValue result=40 Value=cccccccc 02:46:19 SkyScan query 02:46:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:46:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:20 Parameters OK 02:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:20 Set A/D data flow result=40 02:46:20 Set A/D channel type result=40 02:46:20 Set A/D encoding result=40 02:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:20 Set channel filter=0.000000e+000 result=40 02:46:20 Config A/D Result=40 02:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:20 Get A/D filter: -9.255963e+061 result=40 02:46:20 Get A/D value=-858993460 result=40 02:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:20 Parameters OK 02:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:20 Set A/D data flow result=40 02:46:20 Set A/D channel type result=40 02:46:20 Set A/D encoding result=40 02:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:20 Set channel filter=0.000000e+000 result=40 02:46:20 Config A/D Result=40 02:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:20 Get A/D filter: -9.255963e+061 result=40 02:46:20 Get A/D value=-858993460 result=40 02:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:46:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:46:20 Aux= 02:46:20 Message to Camera, serial 102314 queued 02:46:57 Received message from Master: op=PointingHead serial=102327 02:46:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:46:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:46:57 Point started: ret=0 02:46:57 point_skyscan result=0 02:46:58 Check angles 02:46:58 SkyScan query 02:46:59 SkyScan query done: ret=0 az=40.995<-2733 ze=21.63<-10558 Statuses=0008 0009 02:46:59 Msec=0 True Az=40.995 Ze=21.63 Az status=0008 Ze status=0009 02:46:59 Check angles 02:46:59 SkyScan query 02:46:59 SkyScan query done: ret=0 az=40.995<-2733 ze=0.66<-11956 Statuses=0008 0009 02:46:59 Msec=750 True Az=40.995 Ze=0.66 Az status=0008 Ze status=0009 02:47:00 Check angles 02:47:00 SkyScan query 02:47:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.295<-13353 Statuses=0008 0009 02:47:00 Msec=1500 True Az=40.995 Ze=-20.295 Az status=0008 Ze status=0009 02:47:00 Check angles 02:47:00 SkyScan query 02:47:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 02:47:01 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 02:47:01 Check angles 02:47:01 SkyScan query 02:47:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:47:02 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:47:02 Message to Master queued w/err=0: serial=102327 error=0 02:47:07 Received message from Master: op=Filter serial=102328 02:47:07 Color wheel filter change from 0 to 0 02:47:07 FLIGetFilterPos err=0 currentPosition=0 02:47:07 FLIGetStepsRemaining err=0 RemainingSteps=0 02:47:07 Filter is already there-color wheel unchanged 02:47:07 Received message from Master: op=Shutter serial=102329 02:47:07 Shutter LASER close 02:47:07 Received message from Camera: op=State serial=102331 02:47:07 GetSingleValue result=40 Value=cccccccc 02:47:07 SkyScan query 02:47:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:47:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:08 Parameters OK 02:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:08 Set A/D data flow result=40 02:47:08 Set A/D channel type result=40 02:47:08 Set A/D encoding result=40 02:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:08 Set channel filter=0.000000e+000 result=40 02:47:08 Config A/D Result=40 02:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:08 Get A/D filter: -9.255963e+061 result=40 02:47:08 Get A/D value=-858993460 result=40 02:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:08 Parameters OK 02:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:08 Set A/D data flow result=40 02:47:08 Set A/D channel type result=40 02:47:08 Set A/D encoding result=40 02:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:08 Set channel filter=0.000000e+000 result=40 02:47:08 Config A/D Result=40 02:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:08 Get A/D filter: -9.255963e+061 result=40 02:47:08 Get A/D value=-858993460 result=40 02:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:47:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:47:08 Aux= 02:47:08 Message to Camera, serial 102331 queued 02:47:44 Received message from Master: op=PointingHead serial=102344 02:47:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:47:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:47:45 Point started: ret=0 02:47:45 point_skyscan result=0 02:47:45 Check angles 02:47:45 SkyScan query 02:47:46 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.64<-16576 Statuses=0009 0009 02:47:46 Msec=0 True Az=64.185 Ze=-68.64 Az status=0009 Ze status=0009 02:47:46 Check angles 02:47:46 SkyScan query 02:47:47 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.61<-17974 Statuses=0009 0009 02:47:47 Msec=750 True Az=81.84 Ze=-89.61 Az status=0009 Ze status=0009 02:47:47 Check angles 02:47:47 SkyScan query 02:47:48 SkyScan query done: ret=0 az=99.27<-6618 ze=-110.565<-19371 Statuses=0009 0009 02:47:48 Msec=1500 True Az=99.27 Ze=-110.565 Az status=0009 Ze status=0009 02:47:48 Check angles 02:47:48 SkyScan query 02:47:48 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.52<-20768 Statuses=0009 0009 02:47:48 Msec=2250 True Az=116.685 Ze=-131.52 Az status=0009 Ze status=0009 02:47:48 Check angles 02:47:48 SkyScan query 02:47:49 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.525<-21435 Statuses=0009 0008 02:47:49 Msec=3000 True Az=131.055 Ze=-141.525 Az status=0009 Ze status=0008 02:47:49 Check angles 02:47:49 SkyScan query 02:47:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:47:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:47:50 Message to Master queued w/err=0: serial=102344 error=0 02:47:55 Received message from Master: op=Filter serial=102345 02:47:55 Color wheel filter change from 0 to 0 02:47:55 FLIGetFilterPos err=0 currentPosition=0 02:47:55 FLIGetStepsRemaining err=0 RemainingSteps=0 02:47:55 Filter is already there-color wheel unchanged 02:47:55 Received message from Master: op=Shutter serial=102346 02:47:55 Shutter LASER close 02:47:55 Received message from Camera: op=State serial=102348 02:47:55 GetSingleValue result=40 Value=cccccccc 02:47:55 SkyScan query 02:47:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:47:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:56 Parameters OK 02:47:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:56 Set A/D data flow result=40 02:47:56 Set A/D channel type result=40 02:47:56 Set A/D encoding result=40 02:47:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:56 Set channel filter=0.000000e+000 result=40 02:47:56 Config A/D Result=40 02:47:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:56 Get A/D filter: -9.255963e+061 result=40 02:47:56 Get A/D value=-858993460 result=40 02:47:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:56 Parameters OK 02:47:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:56 Set A/D data flow result=40 02:47:56 Set A/D channel type result=40 02:47:56 Set A/D encoding result=40 02:47:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:56 Set channel filter=0.000000e+000 result=40 02:47:56 Config A/D Result=40 02:47:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:56 Get A/D filter: -9.255963e+061 result=40 02:47:56 Get A/D value=-858993460 result=40 02:47:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:47:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:47:56 Aux= 02:47:56 Message to Camera, serial 102348 queued 02:48:31 Received message from Master: op=PointingHead serial=102360 02:48:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:48:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:48:32 Point started: ret=0 02:48:32 point_skyscan result=0 02:48:33 Check angles 02:48:33 SkyScan query 02:48:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 02:48:33 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 02:48:33 Check angles 02:48:33 SkyScan query 02:48:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:48:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:48:34 Message to Master queued w/err=0: serial=102360 error=0 02:48:39 Received message from Master: op=Filter serial=102361 02:48:39 Color wheel filter change from 0 to 0 02:48:39 FLIGetFilterPos err=0 currentPosition=0 02:48:39 FLIGetStepsRemaining err=0 RemainingSteps=0 02:48:39 Filter is already there-color wheel unchanged 02:48:39 Received message from Master: op=Shutter serial=102362 02:48:39 Shutter LASER open 02:48:39 Received message from Camera: op=State serial=102364 02:48:39 GetSingleValue result=40 Value=cccccccc 02:48:39 SkyScan query 02:48:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:48:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:40 Parameters OK 02:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:40 Set A/D data flow result=40 02:48:40 Set A/D channel type result=40 02:48:40 Set A/D encoding result=40 02:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:40 Set channel filter=0.000000e+000 result=40 02:48:40 Config A/D Result=40 02:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:40 Get A/D filter: -9.255963e+061 result=40 02:48:40 Get A/D value=-858993460 result=40 02:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:40 Parameters OK 02:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:40 Set A/D data flow result=40 02:48:40 Set A/D channel type result=40 02:48:40 Set A/D encoding result=40 02:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:40 Set channel filter=0.000000e+000 result=40 02:48:40 Config A/D Result=40 02:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:40 Get A/D filter: -9.255963e+061 result=40 02:48:40 Get A/D value=-858993460 result=40 02:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:48:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:48:40 Aux= 02:48:40 Message to Camera, serial 102364 queued 02:48:48 Received message from Master: op=Shutter serial=102374 02:48:48 Shutter LASER close 02:48:49 Received message from Master: op=PointingHead serial=102378 02:48:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:48:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:48:49 Point started: ret=0 02:48:49 point_skyscan result=0 02:48:50 Check angles 02:48:50 SkyScan query 02:48:51 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.98<-21532 Statuses=0009 0009 02:48:51 Msec=0 True Az=136.17 Ze=-142.98 Az status=0009 Ze status=0009 02:48:51 Check angles 02:48:51 SkyScan query 02:48:51 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.98<-20132 Statuses=0009 0009 02:48:51 Msec=750 True Az=153.705 Ze=-121.98 Az status=0009 Ze status=0009 02:48:51 Check angles 02:48:51 SkyScan query 02:48:52 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.085<-18739 Statuses=0009 0009 02:48:52 Msec=1500 True Az=171.225 Ze=-101.085 Az status=0009 Ze status=0009 02:48:52 Check angles 02:48:52 SkyScan query 02:48:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.145<-17343 Statuses=0008 0009 02:48:53 Msec=2250 True Az=176.01 Ze=-80.145 Az status=0008 Ze status=0009 02:48:53 Check angles 02:48:53 SkyScan query 02:48:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.175<-15945 Statuses=0008 0009 02:48:54 Msec=3000 True Az=176.01 Ze=-59.175 Az status=0008 Ze status=0009 02:48:54 Check angles 02:48:54 SkyScan query 02:48:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:48:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:48:54 Message to Master queued w/err=0: serial=102378 error=0 02:48:59 Received message from Master: op=Filter serial=102379 02:48:59 Color wheel filter change from 0 to 0 02:48:59 FLIGetFilterPos err=0 currentPosition=0 02:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 02:48:59 Filter is already there-color wheel unchanged 02:48:59 Received message from Master: op=Shutter serial=102380 02:48:59 Shutter LASER close 02:49:00 Received message from Camera: op=State serial=102382 02:49:00 GetSingleValue result=40 Value=cccccccc 02:49:00 SkyScan query 02:49:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:49:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:00 Parameters OK 02:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:00 Set A/D data flow result=40 02:49:00 Set A/D channel type result=40 02:49:00 Set A/D encoding result=40 02:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:00 Set channel filter=0.000000e+000 result=40 02:49:00 Config A/D Result=40 02:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:00 Get A/D filter: -9.255963e+061 result=40 02:49:00 Get A/D value=-858993460 result=40 02:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:00 Parameters OK 02:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:00 Set A/D data flow result=40 02:49:00 Set A/D channel type result=40 02:49:00 Set A/D encoding result=40 02:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:00 Set channel filter=0.000000e+000 result=40 02:49:00 Config A/D Result=40 02:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:00 Get A/D filter: -9.255963e+061 result=40 02:49:00 Get A/D value=-858993460 result=40 02:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:49:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:49:00 Aux= 02:49:00 Message to Camera, serial 102382 queued 02:49:37 Received message from Master: op=PointingHead serial=102395 02:49:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:49:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:49:37 Point started: ret=0 02:49:37 point_skyscan result=0 02:49:38 Check angles 02:49:38 SkyScan query 02:49:39 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.24<-13416 Statuses=0009 0009 02:49:39 Msec=0 True Az=152.595 Ze=-21.24 Az status=0009 Ze status=0009 02:49:39 Check angles 02:49:39 SkyScan query 02:49:39 SkyScan query done: ret=0 az=134.625<-8975 ze=0.165<-11989 Statuses=0009 0009 02:49:39 Msec=750 True Az=134.625 Ze=0.165 Az status=0009 Ze status=0009 02:49:40 Check angles 02:49:40 SkyScan query 02:49:40 SkyScan query done: ret=0 az=117.105<-7807 ze=21.15<-10590 Statuses=0009 0009 02:49:40 Msec=1500 True Az=117.105 Ze=21.15 Az status=0009 Ze status=0009 02:49:40 Check angles 02:49:40 SkyScan query 02:49:41 SkyScan query done: ret=0 az=99.81<-6654 ze=42.075<-9195 Statuses=0009 0009 02:49:41 Msec=2250 True Az=99.81 Ze=42.075 Az status=0009 Ze status=0009 02:49:41 Check angles 02:49:41 SkyScan query 02:49:42 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:49:42 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:49:42 Check angles 02:49:42 SkyScan query 02:49:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:49:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:49:42 Message to Master queued w/err=0: serial=102395 error=0 02:49:47 Received message from Master: op=Filter serial=102396 02:49:47 Color wheel filter change from 0 to 0 02:49:47 FLIGetFilterPos err=0 currentPosition=0 02:49:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:49:47 Filter is already there-color wheel unchanged 02:49:48 Received message from Master: op=Shutter serial=102397 02:49:48 Shutter LASER close 02:49:48 Received message from Camera: op=State serial=102399 02:49:48 GetSingleValue result=40 Value=cccccccc 02:49:48 SkyScan query 02:49:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:49:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:48 Parameters OK 02:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:48 Set A/D data flow result=40 02:49:48 Set A/D channel type result=40 02:49:48 Set A/D encoding result=40 02:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:48 Set channel filter=0.000000e+000 result=40 02:49:48 Config A/D Result=40 02:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:48 Get A/D filter: -9.255963e+061 result=40 02:49:48 Get A/D value=-858993460 result=40 02:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:48 Parameters OK 02:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:48 Set A/D data flow result=40 02:49:48 Set A/D channel type result=40 02:49:48 Set A/D encoding result=40 02:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:48 Set channel filter=0.000000e+000 result=40 02:49:48 Config A/D Result=40 02:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:48 Get A/D filter: -9.255963e+061 result=40 02:49:48 Get A/D value=-858993460 result=40 02:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:49:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:49:48 Aux= 02:49:48 Message to Camera, serial 102399 queued 02:50:25 Received message from Master: op=PointingHead serial=102412 02:50:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:50:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:50:26 Point started: ret=0 02:50:26 point_skyscan result=0 02:50:26 Check angles 02:50:26 SkyScan query 02:50:27 SkyScan query done: ret=0 az=85.995<-5733 ze=21.165<-10589 Statuses=0008 0009 02:50:27 Msec=0 True Az=85.995 Ze=21.165 Az status=0008 Ze status=0009 02:50:27 Check angles 02:50:27 SkyScan query 02:50:28 SkyScan query done: ret=0 az=85.995<-5733 ze=0.225<-11985 Statuses=0008 0009 02:50:28 Msec=750 True Az=85.995 Ze=0.225 Az status=0008 Ze status=0009 02:50:28 Check angles 02:50:28 SkyScan query 02:50:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.745<-13383 Statuses=0008 0009 02:50:29 Msec=1500 True Az=85.995 Ze=-20.745 Az status=0008 Ze status=0009 02:50:29 Check angles 02:50:29 SkyScan query 02:50:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.67<-14778 Statuses=0008 0009 02:50:29 Msec=2250 True Az=85.995 Ze=-41.67 Az status=0008 Ze status=0009 02:50:29 Check angles 02:50:29 SkyScan query 02:50:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:50:30 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:50:30 Message to Master queued w/err=0: serial=102412 error=0 02:50:35 Received message from Master: op=Filter serial=102413 02:50:35 Color wheel filter change from 0 to 0 02:50:35 FLIGetFilterPos err=0 currentPosition=0 02:50:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:50:35 Filter is already there-color wheel unchanged 02:50:35 Received message from Master: op=Shutter serial=102414 02:50:35 Shutter LASER close 02:50:35 Received message from Camera: op=State serial=102416 02:50:35 GetSingleValue result=40 Value=cccccccc 02:50:35 SkyScan query 02:50:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:50:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:36 Parameters OK 02:50:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:36 Set A/D data flow result=40 02:50:36 Set A/D channel type result=40 02:50:36 Set A/D encoding result=40 02:50:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:36 Set channel filter=0.000000e+000 result=40 02:50:36 Config A/D Result=40 02:50:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:36 Get A/D filter: -9.255963e+061 result=40 02:50:36 Get A/D value=-858993460 result=40 02:50:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:36 Parameters OK 02:50:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:36 Set A/D data flow result=40 02:50:36 Set A/D channel type result=40 02:50:36 Set A/D encoding result=40 02:50:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:36 Set channel filter=0.000000e+000 result=40 02:50:36 Config A/D Result=40 02:50:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:36 Get A/D filter: -9.255963e+061 result=40 02:50:36 Get A/D value=-858993460 result=40 02:50:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:50:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:50:36 Aux= 02:50:36 Message to Camera, serial 102416 queued 02:51:13 Received message from Master: op=PointingHead serial=102429 02:51:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:51:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:51:13 Point started: ret=0 02:51:13 point_skyscan result=0 02:51:14 Check angles 02:51:14 SkyScan query 02:51:14 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.795<-17453 Statuses=0009 0009 02:51:14 Msec=0 True Az=109.38 Ze=-81.795 Az status=0009 Ze status=0009 02:51:15 Check angles 02:51:15 SkyScan query 02:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.185<-18879 Statuses=0008 0009 02:51:15 Msec=750 True Az=112.995 Ze=-103.185 Az status=0008 Ze status=0009 02:51:15 Check angles 02:51:15 SkyScan query 02:51:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.14<-20276 Statuses=0008 0009 02:51:16 Msec=1500 True Az=112.995 Ze=-124.14 Az status=0008 Ze status=0009 02:51:16 Check angles 02:51:16 SkyScan query 02:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 02:51:17 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 02:51:17 Check angles 02:51:17 SkyScan query 02:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 02:51:17 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 02:51:18 Check angles 02:51:18 SkyScan query 02:51:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:51:18 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:51:18 Message to Master queued w/err=0: serial=102429 error=0 02:51:23 Received message from Master: op=Filter serial=102430 02:51:23 Color wheel filter change from 0 to 0 02:51:23 FLIGetFilterPos err=0 currentPosition=0 02:51:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:51:23 Filter is already there-color wheel unchanged 02:51:23 Received message from Master: op=Shutter serial=102431 02:51:23 Shutter LASER open 02:51:23 Received message from Camera: op=State serial=102433 02:51:23 GetSingleValue result=40 Value=cccccccc 02:51:23 SkyScan query 02:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:51:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:24 Parameters OK 02:51:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:24 Set A/D data flow result=40 02:51:24 Set A/D channel type result=40 02:51:24 Set A/D encoding result=40 02:51:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:24 Set channel filter=0.000000e+000 result=40 02:51:24 Config A/D Result=40 02:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:24 Get A/D filter: -9.255963e+061 result=40 02:51:24 Get A/D value=-858993460 result=40 02:51:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:24 Parameters OK 02:51:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:24 Set A/D data flow result=40 02:51:24 Set A/D channel type result=40 02:51:24 Set A/D encoding result=40 02:51:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:24 Set channel filter=0.000000e+000 result=40 02:51:24 Config A/D Result=40 02:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:24 Get A/D filter: -9.255963e+061 result=40 02:51:24 Get A/D value=-858993460 result=40 02:51:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:51:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:51:24 Aux= 02:51:24 Message to Camera, serial 102433 queued 02:51:32 Received message from Master: op=Shutter serial=102443 02:51:33 Shutter LASER close 02:51:33 Received message from Master: op=PointingHead serial=102447 02:51:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:51:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:51:33 Point started: ret=0 02:51:33 point_skyscan result=0 02:51:34 Check angles 02:51:34 SkyScan query 02:51:35 SkyScan query done: ret=0 az=90.03<-6002 ze=157.41<-1506 Statuses=0009 0009 02:51:35 Msec=0 True Az=90.03 Ze=157.41 Az status=0009 Ze status=0009 02:51:35 Check angles 02:51:35 SkyScan query 02:51:35 SkyScan query done: ret=0 az=72.06<-4804 ze=136.005<-2933 Statuses=0009 0009 02:51:35 Msec=750 True Az=72.06 Ze=136.005 Az status=0009 Ze status=0009 02:51:36 Check angles 02:51:36 SkyScan query 02:51:36 SkyScan query done: ret=0 az=54.615<-3641 ze=114.6<-4360 Statuses=0009 0009 02:51:36 Msec=1500 True Az=54.615 Ze=114.6 Az status=0009 Ze status=0009 02:51:36 Check angles 02:51:36 SkyScan query 02:51:37 SkyScan query done: ret=0 az=40.92<-2728 ze=93.675<-5755 Statuses=0009 0009 02:51:37 Msec=2250 True Az=40.92 Ze=93.675 Az status=0009 Ze status=0009 02:51:37 Check angles 02:51:37 SkyScan query 02:51:38 SkyScan query done: ret=0 az=40.995<-2733 ze=72.675<-7155 Statuses=0008 0009 02:51:38 Msec=3000 True Az=40.995 Ze=72.675 Az status=0008 Ze status=0009 02:51:38 Check angles 02:51:38 SkyScan query 02:51:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 02:51:38 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 02:51:39 Check angles 02:51:39 SkyScan query 02:51:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:51:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:51:39 Message to Master queued w/err=0: serial=102447 error=0 02:51:44 Received message from Master: op=Filter serial=102448 02:51:44 Color wheel filter change from 0 to 0 02:51:44 FLIGetFilterPos err=0 currentPosition=0 02:51:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:51:44 Filter is already there-color wheel unchanged 02:51:44 Received message from Master: op=Shutter serial=102449 02:51:44 Shutter LASER close 02:51:44 Received message from Camera: op=State serial=102451 02:51:44 GetSingleValue result=40 Value=cccccccc 02:51:44 SkyScan query 02:51:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:51:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:45 Parameters OK 02:51:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:45 Set A/D data flow result=40 02:51:45 Set A/D channel type result=40 02:51:45 Set A/D encoding result=40 02:51:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:45 Set channel filter=0.000000e+000 result=40 02:51:45 Config A/D Result=40 02:51:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:45 Get A/D filter: -9.255963e+061 result=40 02:51:45 Get A/D value=-858993460 result=40 02:51:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:45 Parameters OK 02:51:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:45 Set A/D data flow result=40 02:51:45 Set A/D channel type result=40 02:51:45 Set A/D encoding result=40 02:51:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:45 Set channel filter=0.000000e+000 result=40 02:51:45 Config A/D Result=40 02:51:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:45 Get A/D filter: -9.255963e+061 result=40 02:51:45 Get A/D value=-858993460 result=40 02:51:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:51:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:51:45 Aux= 02:51:45 Message to Camera, serial 102451 queued 02:52:22 Received message from Master: op=PointingHead serial=102464 02:52:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:52:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:52:22 Point started: ret=0 02:52:22 point_skyscan result=0 02:52:23 Check angles 02:52:23 SkyScan query 02:52:24 SkyScan query done: ret=0 az=40.995<-2733 ze=21.405<-10573 Statuses=0008 0009 02:52:24 Msec=0 True Az=40.995 Ze=21.405 Az status=0008 Ze status=0009 02:52:24 Check angles 02:52:24 SkyScan query 02:52:25 SkyScan query done: ret=0 az=41.01<-2734 ze=-0.015<-12001 Statuses=0008 0009 02:52:25 Msec=750 True Az=41.01 Ze=-0.015 Az status=0008 Ze status=0009 02:52:25 Check angles 02:52:25 SkyScan query 02:52:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.94<-13396 Statuses=0008 0009 02:52:25 Msec=1500 True Az=40.995 Ze=-20.94 Az status=0008 Ze status=0009 02:52:25 Check angles 02:52:25 SkyScan query 02:52:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 02:52:26 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 02:52:26 Check angles 02:52:26 SkyScan query 02:52:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:52:27 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:52:27 Message to Master queued w/err=0: serial=102464 error=0 02:52:32 Received message from Master: op=Filter serial=102465 02:52:32 Color wheel filter change from 0 to 0 02:52:32 FLIGetFilterPos err=0 currentPosition=0 02:52:32 FLIGetStepsRemaining err=0 RemainingSteps=0 02:52:32 Filter is already there-color wheel unchanged 02:52:32 Received message from Master: op=Shutter serial=102466 02:52:32 Shutter LASER close 02:52:32 Received message from Camera: op=State serial=102468 02:52:32 GetSingleValue result=40 Value=cccccccc 02:52:32 SkyScan query 02:52:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:52:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:33 Parameters OK 02:52:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:33 Set A/D data flow result=40 02:52:33 Set A/D channel type result=40 02:52:33 Set A/D encoding result=40 02:52:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:33 Set channel filter=0.000000e+000 result=40 02:52:33 Config A/D Result=40 02:52:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:33 Get A/D filter: -9.255963e+061 result=40 02:52:33 Get A/D value=-858993460 result=40 02:52:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:33 Parameters OK 02:52:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:33 Set A/D data flow result=40 02:52:33 Set A/D channel type result=40 02:52:33 Set A/D encoding result=40 02:52:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:33 Set channel filter=0.000000e+000 result=40 02:52:33 Config A/D Result=40 02:52:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:33 Get A/D filter: -9.255963e+061 result=40 02:52:33 Get A/D value=-858993460 result=40 02:52:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:52:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:52:33 Aux= 02:52:33 Message to Camera, serial 102468 queued 02:53:09 Received message from Master: op=PointingHead serial=102481 02:53:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:53:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:53:10 Point started: ret=0 02:53:10 point_skyscan result=0 02:53:10 Check angles 02:53:10 SkyScan query 02:53:11 SkyScan query done: ret=0 az=63.66<-4244 ze=-68.01<-16534 Statuses=0009 0009 02:53:11 Msec=0 True Az=63.66 Ze=-68.01 Az status=0009 Ze status=0009 02:53:11 Check angles 02:53:11 SkyScan query 02:53:12 SkyScan query done: ret=0 az=81.135<-5409 ze=-88.98<-17932 Statuses=0009 0009 02:53:12 Msec=750 True Az=81.135 Ze=-88.98 Az status=0009 Ze status=0009 02:53:12 Check angles 02:53:12 SkyScan query 02:53:13 SkyScan query done: ret=0 az=98.7<-6580 ze=-109.89<-19326 Statuses=0009 0009 02:53:13 Msec=1500 True Az=98.7 Ze=-109.89 Az status=0009 Ze status=0009 02:53:13 Check angles 02:53:13 SkyScan query 02:53:13 SkyScan query done: ret=0 az=116.205<-7747 ze=-130.86<-20724 Statuses=0009 0009 02:53:13 Msec=2250 True Az=116.205 Ze=-130.86 Az status=0009 Ze status=0009 02:53:13 Check angles 02:53:13 SkyScan query 02:53:14 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 02:53:14 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 02:53:14 Check angles 02:53:14 SkyScan query 02:53:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:53:15 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:53:15 Message to Master queued w/err=0: serial=102481 error=0 02:53:20 Received message from Master: op=Filter serial=102482 02:53:20 Color wheel filter change from 0 to 0 02:53:20 FLIGetFilterPos err=0 currentPosition=0 02:53:20 FLIGetStepsRemaining err=0 RemainingSteps=0 02:53:20 Filter is already there-color wheel unchanged 02:53:20 Received message from Master: op=Shutter serial=102483 02:53:20 Shutter LASER close 02:53:20 Received message from Camera: op=State serial=102485 02:53:20 GetSingleValue result=40 Value=cccccccc 02:53:20 SkyScan query 02:53:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:53:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:21 Parameters OK 02:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:21 Set A/D data flow result=40 02:53:21 Set A/D channel type result=40 02:53:21 Set A/D encoding result=40 02:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:21 Set channel filter=0.000000e+000 result=40 02:53:21 Config A/D Result=40 02:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:21 Get A/D filter: -9.255963e+061 result=40 02:53:21 Get A/D value=-858993460 result=40 02:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:21 Parameters OK 02:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:21 Set A/D data flow result=40 02:53:21 Set A/D channel type result=40 02:53:21 Set A/D encoding result=40 02:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:21 Set channel filter=0.000000e+000 result=40 02:53:21 Config A/D Result=40 02:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:21 Get A/D filter: -9.255963e+061 result=40 02:53:21 Get A/D value=-858993460 result=40 02:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:53:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:53:21 Aux= 02:53:21 Message to Camera, serial 102485 queued 02:53:57 Received message from Master: op=PointingHead serial=102498 02:53:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:53:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:53:58 Point started: ret=0 02:53:58 point_skyscan result=0 02:53:59 Check angles 02:53:59 SkyScan query 02:53:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 02:53:59 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 02:53:59 Check angles 02:53:59 SkyScan query 02:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:54:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:54:00 Message to Master queued w/err=0: serial=102498 error=0 02:54:05 Received message from Master: op=Filter serial=102499 02:54:05 Color wheel filter change from 0 to 0 02:54:05 FLIGetFilterPos err=0 currentPosition=0 02:54:05 FLIGetStepsRemaining err=0 RemainingSteps=0 02:54:05 Filter is already there-color wheel unchanged 02:54:05 Received message from Master: op=Shutter serial=102500 02:54:05 Shutter LASER open 02:54:05 Received message from Camera: op=State serial=102502 02:54:05 GetSingleValue result=40 Value=cccccccc 02:54:05 SkyScan query 02:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:54:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:06 Parameters OK 02:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:06 Set A/D data flow result=40 02:54:06 Set A/D channel type result=40 02:54:06 Set A/D encoding result=40 02:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:06 Set channel filter=0.000000e+000 result=40 02:54:06 Config A/D Result=40 02:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:06 Get A/D filter: -9.255963e+061 result=40 02:54:06 Get A/D value=-858993460 result=40 02:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:06 Parameters OK 02:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:06 Set A/D data flow result=40 02:54:06 Set A/D channel type result=40 02:54:06 Set A/D encoding result=40 02:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:06 Set channel filter=0.000000e+000 result=40 02:54:06 Config A/D Result=40 02:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:06 Get A/D filter: -9.255963e+061 result=40 02:54:06 Get A/D value=-858993460 result=40 02:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:54:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:54:06 Aux= 02:54:06 Message to Camera, serial 102502 queued 02:54:14 Received message from Master: op=Shutter serial=102512 02:54:14 Shutter LASER close 02:54:15 Received message from Master: op=PointingHead serial=102516 02:54:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:54:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:54:15 Point started: ret=0 02:54:15 point_skyscan result=0 02:54:16 Check angles 02:54:16 SkyScan query 02:54:16 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.445<-21563 Statuses=0009 0009 02:54:16 Msec=0 True Az=135.825 Ze=-143.445 Az status=0009 Ze status=0009 02:54:17 Check angles 02:54:17 SkyScan query 02:54:17 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.025<-20135 Statuses=0009 0009 02:54:17 Msec=750 True Az=153.66 Ze=-122.025 Az status=0009 Ze status=0009 02:54:17 Check angles 02:54:17 SkyScan query 02:54:18 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.62<-18708 Statuses=0009 0009 02:54:18 Msec=1500 True Az=171.495 Ze=-100.62 Az status=0009 Ze status=0009 02:54:18 Check angles 02:54:18 SkyScan query 02:54:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.755<-17317 Statuses=0008 0009 02:54:19 Msec=2250 True Az=176.01 Ze=-79.755 Az status=0008 Ze status=0009 02:54:19 Check angles 02:54:19 SkyScan query 02:54:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.725<-15915 Statuses=0008 0009 02:54:20 Msec=3000 True Az=176.01 Ze=-58.725 Az status=0008 Ze status=0009 02:54:20 Check angles 02:54:20 SkyScan query 02:54:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:54:20 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:54:20 Message to Master queued w/err=0: serial=102516 error=0 02:54:25 Received message from Master: op=Filter serial=102517 02:54:25 Color wheel filter change from 0 to 0 02:54:25 FLIGetFilterPos err=0 currentPosition=0 02:54:25 FLIGetStepsRemaining err=0 RemainingSteps=0 02:54:25 Filter is already there-color wheel unchanged 02:54:26 Received message from Master: op=Shutter serial=102518 02:54:26 Shutter LASER close 02:54:26 Received message from Camera: op=State serial=102520 02:54:26 GetSingleValue result=40 Value=cccccccc 02:54:26 SkyScan query 02:54:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:54:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:26 Parameters OK 02:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:26 Set A/D data flow result=40 02:54:26 Set A/D channel type result=40 02:54:26 Set A/D encoding result=40 02:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:26 Set channel filter=0.000000e+000 result=40 02:54:26 Config A/D Result=40 02:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:26 Get A/D filter: -9.255963e+061 result=40 02:54:26 Get A/D value=-858993460 result=40 02:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:26 Parameters OK 02:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:26 Set A/D data flow result=40 02:54:26 Set A/D channel type result=40 02:54:26 Set A/D encoding result=40 02:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:26 Set channel filter=0.000000e+000 result=40 02:54:26 Config A/D Result=40 02:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:26 Get A/D filter: -9.255963e+061 result=40 02:54:26 Get A/D value=-858993460 result=40 02:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:54:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:54:26 Aux= 02:54:26 Message to Camera, serial 102520 queued 02:55:03 Received message from Master: op=PointingHead serial=102533 02:55:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:55:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:55:03 Point started: ret=0 02:55:03 point_skyscan result=0 02:55:04 Check angles 02:55:04 SkyScan query 02:55:05 SkyScan query done: ret=0 az=153.15<-10210 ze=-21.945<-13463 Statuses=0009 0009 02:55:05 Msec=0 True Az=153.15 Ze=-21.945 Az status=0009 Ze status=0009 02:55:05 Check angles 02:55:05 SkyScan query 02:55:06 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.93<-12062 Statuses=0009 0009 02:55:06 Msec=750 True Az=135.72 Ze=-0.93 Az status=0009 Ze status=0009 02:55:06 Check angles 02:55:06 SkyScan query 02:55:06 SkyScan query done: ret=0 az=118.155<-7877 ze=19.995<-10667 Statuses=0009 0009 02:55:06 Msec=1500 True Az=118.155 Ze=19.995 Az status=0009 Ze status=0009 02:55:06 Check angles 02:55:06 SkyScan query 02:55:07 SkyScan query done: ret=0 az=100.38<-6692 ze=41.43<-9238 Statuses=0009 0009 02:55:07 Msec=2250 True Az=100.38 Ze=41.43 Az status=0009 Ze status=0009 02:55:07 Check angles 02:55:07 SkyScan query 02:55:08 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 02:55:08 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 02:55:08 Check angles 02:55:08 SkyScan query 02:55:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:55:09 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:55:09 Message to Master queued w/err=0: serial=102533 error=0 02:55:14 Received message from Master: op=Filter serial=102534 02:55:14 Color wheel filter change from 0 to 0 02:55:14 FLIGetFilterPos err=0 currentPosition=0 02:55:14 FLIGetStepsRemaining err=0 RemainingSteps=0 02:55:14 Filter is already there-color wheel unchanged 02:55:14 Received message from Master: op=Shutter serial=102535 02:55:14 Shutter LASER close 02:55:14 Received message from Camera: op=State serial=102537 02:55:14 GetSingleValue result=40 Value=cccccccc 02:55:14 SkyScan query 02:55:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:55:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:14 Parameters OK 02:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:14 Set A/D data flow result=40 02:55:14 Set A/D channel type result=40 02:55:14 Set A/D encoding result=40 02:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:14 Set channel filter=0.000000e+000 result=40 02:55:14 Config A/D Result=40 02:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:14 Get A/D filter: -9.255963e+061 result=40 02:55:14 Get A/D value=-858993460 result=40 02:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:14 Parameters OK 02:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:14 Set A/D data flow result=40 02:55:14 Set A/D channel type result=40 02:55:14 Set A/D encoding result=40 02:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:14 Set channel filter=0.000000e+000 result=40 02:55:14 Config A/D Result=40 02:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:14 Get A/D filter: -9.255963e+061 result=40 02:55:14 Get A/D value=-858993460 result=40 02:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:55:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:55:14 Aux= 02:55:14 Message to Camera, serial 102537 queued 02:55:51 Received message from Master: op=PointingHead serial=102550 02:55:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:55:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:55:52 Point started: ret=0 [UTC 2018-12-13 02:55:52] 02:55:52 point_skyscan result=0 02:55:52 Check angles 02:55:52 SkyScan query 02:55:53 SkyScan query done: ret=0 az=85.995<-5733 ze=19.71<-10686 Statuses=0008 0009 02:55:53 Msec=0 True Az=85.995 Ze=19.71 Az status=0008 Ze status=0009 [UTC 2018-12-13 02:55:53] 02:55:53 Check angles 02:55:53 SkyScan query 02:55:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-1.185<-12079 Statuses=0008 0009 02:55:54 Msec=750 True Az=85.995 Ze=-1.185 Az status=0008 Ze status=0009 02:55:54 Check angles 02:55:54 SkyScan query 02:55:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-22.62<-13508 Statuses=0008 0009 02:55:55 Msec=1500 True Az=85.995 Ze=-22.62 Az status=0008 Ze status=0009 02:55:55 Check angles 02:55:55 SkyScan query 02:55:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-43.53<-14902 Statuses=0008 0009 02:55:55 Msec=2250 True Az=85.995 Ze=-43.53 Az status=0008 Ze status=0009 02:55:55 Check angles 02:55:55 SkyScan query 02:55:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:55:56 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:55:56 Message to Master queued w/err=0: serial=102550 error=0 02:56:01 Received message from Master: op=Filter serial=102551 02:56:01 Color wheel filter change from 0 to 0 02:56:01 FLIGetFilterPos err=0 currentPosition=0 02:56:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:56:01 Filter is already there-color wheel unchanged 02:56:01 Received message from Master: op=Shutter serial=102552 02:56:01 Shutter LASER close 02:56:01 Received message from Camera: op=State serial=102554 02:56:01 GetSingleValue result=40 Value=cccccccc 02:56:01 SkyScan query 02:56:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:56:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:02 Parameters OK 02:56:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:02 Set A/D data flow result=40 02:56:02 Set A/D channel type result=40 02:56:02 Set A/D encoding result=40 02:56:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:02 Set channel filter=0.000000e+000 result=40 02:56:02 Config A/D Result=40 02:56:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:02 Get A/D filter: -9.255963e+061 result=40 02:56:02 Get A/D value=-858993460 result=40 02:56:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:02 Parameters OK 02:56:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:02 Set A/D data flow result=40 02:56:02 Set A/D channel type result=40 02:56:02 Set A/D encoding result=40 02:56:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:02 Set channel filter=0.000000e+000 result=40 02:56:02 Config A/D Result=40 02:56:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:02 Get A/D filter: -9.255963e+061 result=40 02:56:02 Get A/D value=-858993460 result=40 02:56:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:56:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:56:02 Aux= 02:56:02 Message to Camera, serial 102554 queued 02:56:39 Received message from Master: op=PointingHead serial=102567 02:56:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:56:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:56:39 Point started: ret=0 02:56:39 point_skyscan result=0 02:56:40 Check angles 02:56:40 SkyScan query 02:56:40 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.165<-17411 Statuses=0009 0009 02:56:40 Msec=0 True Az=108.81 Ze=-81.165 Az status=0009 Ze status=0009 02:56:41 Check angles 02:56:41 SkyScan query 02:56:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 02:56:41 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 02:56:41 Check angles 02:56:41 SkyScan query 02:56:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 02:56:42 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 02:56:42 Check angles 02:56:42 SkyScan query 02:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 02:56:43 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 02:56:43 Check angles 02:56:43 SkyScan query 02:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 02:56:43 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 02:56:44 Check angles 02:56:44 SkyScan query 02:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:56:44 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:56:44 Message to Master queued w/err=0: serial=102567 error=0 02:56:49 Received message from Master: op=Filter serial=102568 02:56:49 Color wheel filter change from 0 to 0 02:56:49 FLIGetFilterPos err=0 currentPosition=0 02:56:49 FLIGetStepsRemaining err=0 RemainingSteps=0 02:56:49 Filter is already there-color wheel unchanged 02:56:49 Received message from Master: op=Shutter serial=102569 02:56:49 Shutter LASER open 02:56:49 Received message from Camera: op=State serial=102571 02:56:49 GetSingleValue result=40 Value=cccccccc 02:56:49 SkyScan query 02:56:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:56:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:50 Parameters OK 02:56:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:50 Set A/D data flow result=40 02:56:50 Set A/D channel type result=40 02:56:50 Set A/D encoding result=40 02:56:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:50 Set channel filter=0.000000e+000 result=40 02:56:50 Config A/D Result=40 02:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:50 Get A/D filter: -9.255963e+061 result=40 02:56:50 Get A/D value=-858993460 result=40 02:56:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:50 Parameters OK 02:56:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:50 Set A/D data flow result=40 02:56:50 Set A/D channel type result=40 02:56:50 Set A/D encoding result=40 02:56:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:50 Set channel filter=0.000000e+000 result=40 02:56:50 Config A/D Result=40 02:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:50 Get A/D filter: -9.255963e+061 result=40 02:56:50 Get A/D value=-858993460 result=40 02:56:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:56:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:56:50 Aux= 02:56:50 Message to Camera, serial 102571 queued 02:56:58 Received message from Master: op=Shutter serial=102581 02:56:58 Shutter LASER close 02:56:59 Received message from Master: op=PointingHead serial=102585 02:56:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:56:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:56:59 Point started: ret=0 02:56:59 point_skyscan result=0 02:57:00 Check angles 02:57:00 SkyScan query 02:57:01 SkyScan query done: ret=0 az=89.55<-5970 ze=156.795<-1547 Statuses=0009 0009 02:57:01 Msec=0 True Az=89.55 Ze=156.795 Az status=0009 Ze status=0009 02:57:01 Check angles 02:57:01 SkyScan query 02:57:01 SkyScan query done: ret=0 az=72.075<-4805 ze=135.84<-2944 Statuses=0009 0009 02:57:01 Msec=750 True Az=72.075 Ze=135.84 Az status=0009 Ze status=0009 02:57:02 Check angles 02:57:02 SkyScan query 02:57:02 SkyScan query done: ret=0 az=54.78<-3652 ze=114.87<-4342 Statuses=0009 0009 02:57:02 Msec=1500 True Az=54.78 Ze=114.87 Az status=0009 Ze status=0009 02:57:02 Check angles 02:57:02 SkyScan query 02:57:03 SkyScan query done: ret=0 az=40.89<-2726 ze=93.9<-5740 Statuses=0009 0009 02:57:03 Msec=2250 True Az=40.89 Ze=93.9 Az status=0009 Ze status=0009 02:57:03 Check angles 02:57:03 SkyScan query 02:57:04 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 02:57:04 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 02:57:04 Check angles 02:57:04 SkyScan query 02:57:04 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 02:57:04 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 02:57:05 Check angles 02:57:05 SkyScan query 02:57:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:57:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:57:05 Message to Master queued w/err=0: serial=102585 error=0 02:57:10 Received message from Master: op=Filter serial=102586 02:57:10 Color wheel filter change from 0 to 0 02:57:10 FLIGetFilterPos err=0 currentPosition=0 02:57:10 FLIGetStepsRemaining err=0 RemainingSteps=0 02:57:10 Filter is already there-color wheel unchanged 02:57:10 Received message from Master: op=Shutter serial=102587 02:57:10 Shutter LASER close 02:57:10 Received message from Camera: op=State serial=102589 02:57:10 GetSingleValue result=40 Value=cccccccc 02:57:10 SkyScan query 02:57:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:57:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:11 Parameters OK 02:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:11 Set A/D data flow result=40 02:57:11 Set A/D channel type result=40 02:57:11 Set A/D encoding result=40 02:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:11 Set channel filter=0.000000e+000 result=40 02:57:11 Config A/D Result=40 02:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:11 Get A/D filter: -9.255963e+061 result=40 02:57:11 Get A/D value=-858993460 result=40 02:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:11 Parameters OK 02:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:11 Set A/D data flow result=40 02:57:11 Set A/D channel type result=40 02:57:11 Set A/D encoding result=40 02:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:11 Set channel filter=0.000000e+000 result=40 02:57:11 Config A/D Result=40 02:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:11 Get A/D filter: -9.255963e+061 result=40 02:57:11 Get A/D value=-858993460 result=40 02:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:57:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:57:11 Aux= 02:57:11 Message to Camera, serial 102589 queued 02:57:48 Received message from Master: op=PointingHead serial=102602 02:57:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:57:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:57:48 Point started: ret=0 02:57:48 point_skyscan result=0 02:57:49 Check angles 02:57:49 SkyScan query 02:57:50 SkyScan query done: ret=0 az=40.995<-2733 ze=21.54<-10564 Statuses=0008 0009 02:57:50 Msec=0 True Az=40.995 Ze=21.54 Az status=0008 Ze status=0009 02:57:50 Check angles 02:57:50 SkyScan query 02:57:50 SkyScan query done: ret=0 az=40.995<-2733 ze=0.57<-11962 Statuses=0008 0009 02:57:50 Msec=750 True Az=40.995 Ze=0.57 Az status=0008 Ze status=0009 02:57:51 Check angles 02:57:51 SkyScan query 02:57:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.4<-13360 Statuses=0008 0009 02:57:51 Msec=1500 True Az=40.995 Ze=-20.4 Az status=0008 Ze status=0009 02:57:51 Check angles 02:57:51 SkyScan query 02:57:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 02:57:52 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 02:57:52 Check angles 02:57:52 SkyScan query 02:57:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:57:53 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:57:53 Message to Master queued w/err=0: serial=102602 error=0 02:57:58 Received message from Master: op=Filter serial=102603 02:57:58 Color wheel filter change from 0 to 0 02:57:58 FLIGetFilterPos err=0 currentPosition=0 02:57:58 FLIGetStepsRemaining err=0 RemainingSteps=0 02:57:58 Filter is already there-color wheel unchanged 02:57:58 Received message from Master: op=Shutter serial=102604 02:57:58 Shutter LASER close 02:57:58 Received message from Camera: op=State serial=102606 02:57:58 GetSingleValue result=40 Value=cccccccc 02:57:58 SkyScan query 02:57:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:57:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:58 Parameters OK 02:57:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:58 Set A/D data flow result=40 02:57:58 Set A/D channel type result=40 02:57:58 Set A/D encoding result=40 02:57:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:58 Set channel filter=0.000000e+000 result=40 02:57:58 Config A/D Result=40 02:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:58 Get A/D filter: -9.255963e+061 result=40 02:57:58 Get A/D value=-858993460 result=40 02:57:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:58 Parameters OK 02:57:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:58 Set A/D data flow result=40 02:57:58 Set A/D channel type result=40 02:57:58 Set A/D encoding result=40 02:57:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:58 Set channel filter=0.000000e+000 result=40 02:57:58 Config A/D Result=40 02:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:58 Get A/D filter: -9.255963e+061 result=40 02:57:58 Get A/D value=-858993460 result=40 02:57:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:57:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:57:58 Aux= 02:57:58 Message to Camera, serial 102606 queued 02:58:35 Received message from Master: op=PointingHead serial=102619 02:58:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:58:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:58:36 Point started: ret=0 02:58:36 point_skyscan result=0 02:58:36 Check angles 02:58:36 SkyScan query 02:58:37 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.73<-16582 Statuses=0009 0009 02:58:37 Msec=0 True Az=64.23 Ze=-68.73 Az status=0009 Ze status=0009 02:58:37 Check angles 02:58:37 SkyScan query 02:58:38 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.685<-17979 Statuses=0009 0009 02:58:38 Msec=750 True Az=81.9 Ze=-89.685 Az status=0009 Ze status=0009 02:58:38 Check angles 02:58:38 SkyScan query 02:58:39 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.655<-19377 Statuses=0009 0009 02:58:39 Msec=1500 True Az=99.33 Ze=-110.655 Az status=0009 Ze status=0009 02:58:39 Check angles 02:58:39 SkyScan query 02:58:39 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.595<-20773 Statuses=0009 0009 02:58:39 Msec=2250 True Az=116.775 Ze=-131.595 Az status=0009 Ze status=0009 02:58:39 Check angles 02:58:39 SkyScan query 02:58:40 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 02:58:40 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 02:58:40 Check angles 02:58:40 SkyScan query 02:58:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:58:41 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:58:41 Message to Master queued w/err=0: serial=102619 error=0 02:58:46 Received message from Master: op=Filter serial=102620 02:58:46 Color wheel filter change from 0 to 0 02:58:46 FLIGetFilterPos err=0 currentPosition=0 02:58:46 FLIGetStepsRemaining err=0 RemainingSteps=0 02:58:46 Filter is already there-color wheel unchanged 02:58:46 Received message from Master: op=Shutter serial=102621 02:58:46 Shutter LASER close 02:58:46 Received message from Camera: op=State serial=102623 02:58:46 GetSingleValue result=40 Value=cccccccc 02:58:46 SkyScan query 02:58:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:58:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:47 Parameters OK 02:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:47 Set A/D data flow result=40 02:58:47 Set A/D channel type result=40 02:58:47 Set A/D encoding result=40 02:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:47 Set channel filter=0.000000e+000 result=40 02:58:47 Config A/D Result=40 02:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:47 Get A/D filter: -9.255963e+061 result=40 02:58:47 Get A/D value=-858993460 result=40 02:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:47 Parameters OK 02:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:47 Set A/D data flow result=40 02:58:47 Set A/D channel type result=40 02:58:47 Set A/D encoding result=40 02:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:47 Set channel filter=0.000000e+000 result=40 02:58:47 Config A/D Result=40 02:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:47 Get A/D filter: -9.255963e+061 result=40 02:58:47 Get A/D value=-858993460 result=40 02:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:58:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:58:47 Aux= 02:58:47 Message to Camera, serial 102623 queued 02:59:23 Received message from Master: op=PointingHead serial=102636 02:59:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:59:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:59:24 Point started: ret=0 02:59:24 point_skyscan result=0 02:59:25 Check angles 02:59:25 SkyScan query 02:59:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 02:59:25 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 02:59:25 Check angles 02:59:25 SkyScan query 02:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:59:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:59:26 Message to Master queued w/err=0: serial=102636 error=0 02:59:31 Received message from Master: op=Filter serial=102637 02:59:31 Color wheel filter change from 0 to 0 02:59:31 FLIGetFilterPos err=0 currentPosition=0 02:59:31 FLIGetStepsRemaining err=0 RemainingSteps=0 02:59:31 Filter is already there-color wheel unchanged 02:59:31 Received message from Master: op=Shutter serial=102638 02:59:31 Shutter LASER open 02:59:31 Received message from Camera: op=State serial=102640 02:59:31 GetSingleValue result=40 Value=cccccccc 02:59:31 SkyScan query 02:59:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:59:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:32 Parameters OK 02:59:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:32 Set A/D data flow result=40 02:59:32 Set A/D channel type result=40 02:59:32 Set A/D encoding result=40 02:59:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:32 Set channel filter=0.000000e+000 result=40 02:59:32 Config A/D Result=40 02:59:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:32 Get A/D filter: -9.255963e+061 result=40 02:59:32 Get A/D value=-858993460 result=40 02:59:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:32 Parameters OK 02:59:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:32 Set A/D data flow result=40 02:59:32 Set A/D channel type result=40 02:59:32 Set A/D encoding result=40 02:59:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:32 Set channel filter=0.000000e+000 result=40 02:59:32 Config A/D Result=40 02:59:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:32 Get A/D filter: -9.255963e+061 result=40 02:59:32 Get A/D value=-858993460 result=40 02:59:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:59:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:59:32 Aux= 02:59:32 Message to Camera, serial 102640 queued 02:59:40 Received message from Master: op=Shutter serial=102650 02:59:40 Shutter LASER close 02:59:41 Received message from Master: op=PointingHead serial=102654 02:59:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:59:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:59:41 Point started: ret=0 02:59:41 point_skyscan result=0 02:59:42 Check angles 02:59:42 SkyScan query 02:59:43 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.115<-21541 Statuses=0009 0009 02:59:43 Msec=0 True Az=136.17 Ze=-143.115 Az status=0009 Ze status=0009 02:59:43 Check angles 02:59:43 SkyScan query 02:59:43 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.115<-20141 Statuses=0009 0009 02:59:43 Msec=750 True Az=153.6 Ze=-122.115 Az status=0009 Ze status=0009 02:59:43 Check angles 02:59:43 SkyScan query 02:59:44 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.235<-18749 Statuses=0009 0009 02:59:44 Msec=1500 True Az=171.045 Ze=-101.235 Az status=0009 Ze status=0009 02:59:44 Check angles 02:59:44 SkyScan query 02:59:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.265<-17351 Statuses=0008 0009 02:59:45 Msec=2250 True Az=176.01 Ze=-80.265 Az status=0008 Ze status=0009 02:59:45 Check angles 02:59:45 SkyScan query 02:59:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.295<-15953 Statuses=0008 0009 02:59:46 Msec=3000 True Az=176.01 Ze=-59.295 Az status=0008 Ze status=0009 02:59:46 Check angles 02:59:46 SkyScan query 02:59:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:59:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:59:46 Message to Master queued w/err=0: serial=102654 error=0 02:59:51 Received message from Master: op=Filter serial=102655 02:59:51 Color wheel filter change from 0 to 0 02:59:51 FLIGetFilterPos err=0 currentPosition=0 02:59:51 FLIGetStepsRemaining err=0 RemainingSteps=0 02:59:51 Filter is already there-color wheel unchanged 02:59:51 Received message from Master: op=Shutter serial=102656 02:59:51 Shutter LASER close 02:59:52 Received message from Camera: op=State serial=102658 02:59:52 GetSingleValue result=40 Value=cccccccc 02:59:52 SkyScan query 02:59:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:59:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:52 Parameters OK 02:59:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:52 Set A/D data flow result=40 02:59:52 Set A/D channel type result=40 02:59:52 Set A/D encoding result=40 02:59:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:52 Set channel filter=0.000000e+000 result=40 02:59:52 Config A/D Result=40 02:59:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:52 Get A/D filter: -9.255963e+061 result=40 02:59:52 Get A/D value=-858993460 result=40 02:59:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:52 Parameters OK 02:59:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:52 Set A/D data flow result=40 02:59:52 Set A/D channel type result=40 02:59:52 Set A/D encoding result=40 02:59:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:52 Set channel filter=0.000000e+000 result=40 02:59:52 Config A/D Result=40 02:59:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:52 Get A/D filter: -9.255963e+061 result=40 02:59:52 Get A/D value=-858993460 result=40 02:59:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:59:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:59:52 Aux= 02:59:52 Message to Camera, serial 102658 queued 03:00:29 Received message from Master: op=PointingHead serial=102671 03:00:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:00:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:00:29 Point started: ret=0 03:00:29 point_skyscan result=0 03:00:30 Check angles 03:00:30 SkyScan query 03:00:31 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.915<-13461 Statuses=0009 0009 03:00:31 Msec=0 True Az=153.105 Ze=-21.915 Az status=0009 Ze status=0009 03:00:31 Check angles 03:00:31 SkyScan query 03:00:31 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.915<-12061 Statuses=0009 0009 03:00:31 Msec=750 True Az=135.66 Ze=-0.915 Az status=0009 Ze status=0009 03:00:32 Check angles 03:00:32 SkyScan query 03:00:32 SkyScan query done: ret=0 az=117.9<-7860 ze=20.475<-10635 Statuses=0009 0009 03:00:32 Msec=1500 True Az=117.9 Ze=20.475 Az status=0009 Ze status=0009 03:00:32 Check angles 03:00:32 SkyScan query 03:00:33 SkyScan query done: ret=0 az=100.725<-6715 ze=41.07<-9262 Statuses=0009 0009 03:00:33 Msec=2250 True Az=100.725 Ze=41.07 Az status=0009 Ze status=0009 03:00:33 Check angles 03:00:33 SkyScan query 03:00:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:00:34 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:00:34 Check angles 03:00:34 SkyScan query 03:00:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:00:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:00:34 Message to Master queued w/err=0: serial=102671 error=0 03:00:39 Received message from Master: op=Filter serial=102672 03:00:39 Color wheel filter change from 0 to 0 03:00:39 FLIGetFilterPos err=0 currentPosition=0 03:00:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:00:39 Filter is already there-color wheel unchanged 03:00:40 Received message from Master: op=Shutter serial=102673 03:00:40 Shutter LASER close 03:00:40 Received message from Camera: op=State serial=102675 03:00:40 GetSingleValue result=40 Value=cccccccc 03:00:40 SkyScan query 03:00:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:00:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:40 Parameters OK 03:00:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:40 Set A/D data flow result=40 03:00:40 Set A/D channel type result=40 03:00:40 Set A/D encoding result=40 03:00:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:40 Set channel filter=0.000000e+000 result=40 03:00:40 Config A/D Result=40 03:00:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:40 Get A/D filter: -9.255963e+061 result=40 03:00:40 Get A/D value=-858993460 result=40 03:00:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:40 Parameters OK 03:00:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:40 Set A/D data flow result=40 03:00:40 Set A/D channel type result=40 03:00:40 Set A/D encoding result=40 03:00:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:40 Set channel filter=0.000000e+000 result=40 03:00:40 Config A/D Result=40 03:00:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:40 Get A/D filter: -9.255963e+061 result=40 03:00:40 Get A/D value=-858993460 result=40 03:00:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:00:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:00:40 Aux= 03:00:40 Message to Camera, serial 102675 queued 03:01:17 Received message from Master: op=PointingHead serial=102688 03:01:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:01:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:01:17 Point started: ret=0 03:01:17 point_skyscan result=0 03:01:18 Check angles 03:01:18 SkyScan query 03:01:19 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 03:01:19 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 03:01:19 Check angles 03:01:19 SkyScan query 03:01:19 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 03:01:19 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 03:01:20 Check angles 03:01:20 SkyScan query 03:01:20 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 03:01:20 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 03:01:20 Check angles 03:01:20 SkyScan query 03:01:21 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 03:01:21 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 03:01:21 Check angles 03:01:21 SkyScan query 03:01:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:01:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:01:22 Check angles 03:01:22 SkyScan query 03:01:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:01:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:01:22 Message to Master queued w/err=0: serial=102688 error=0 03:01:27 Received message from Master: op=Filter serial=102689 03:01:27 Color wheel filter change from 0 to 0 03:01:27 FLIGetFilterPos err=0 currentPosition=0 03:01:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:01:27 Filter is already there-color wheel unchanged 03:01:28 Received message from Master: op=Shutter serial=102690 03:01:28 Shutter LASER close 03:01:28 Received message from Camera: op=State serial=102692 03:01:28 GetSingleValue result=40 Value=cccccccc 03:01:28 SkyScan query 03:01:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:01:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:28 Parameters OK 03:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:28 Set A/D data flow result=40 03:01:28 Set A/D channel type result=40 03:01:28 Set A/D encoding result=40 03:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:28 Set channel filter=0.000000e+000 result=40 03:01:28 Config A/D Result=40 03:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:28 Get A/D filter: -9.255963e+061 result=40 03:01:28 Get A/D value=-858993460 result=40 03:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:28 Parameters OK 03:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:28 Set A/D data flow result=40 03:01:28 Set A/D channel type result=40 03:01:28 Set A/D encoding result=40 03:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:28 Set channel filter=0.000000e+000 result=40 03:01:28 Config A/D Result=40 03:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:28 Get A/D filter: -9.255963e+061 result=40 03:01:28 Get A/D value=-858993460 result=40 03:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:01:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:01:28 Aux= 03:01:28 Message to Camera, serial 102692 queued 03:02:05 Received message from Master: op=PointingHead serial=102705 03:02:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:02:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:02:05 Point started: ret=0 03:02:05 point_skyscan result=0 03:02:06 Check angles 03:02:06 SkyScan query 03:02:07 SkyScan query done: ret=0 az=152.745<-10183 ze=8.325<-11445 Statuses=0009 0009 03:02:07 Msec=0 True Az=152.745 Ze=8.325 Az status=0009 Ze status=0009 03:02:07 Check angles 03:02:07 SkyScan query 03:02:08 SkyScan query done: ret=0 az=134.895<-8993 ze=-13.035<-12869 Statuses=0009 0009 03:02:08 Msec=750 True Az=134.895 Ze=-13.035 Az status=0009 Ze status=0009 03:02:08 Check angles 03:02:08 SkyScan query 03:02:08 SkyScan query done: ret=0 az=117.42<-7828 ze=-34.005<-14267 Statuses=0009 0009 03:02:08 Msec=1500 True Az=117.42 Ze=-34.005 Az status=0009 Ze status=0009 03:02:08 Check angles 03:02:08 SkyScan query 03:02:09 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.555<-15437 Statuses=0009 0009 03:02:09 Msec=2250 True Az=100.02 Ze=-51.555 Az status=0009 Ze status=0009 03:02:09 Check angles 03:02:09 SkyScan query 03:02:10 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:02:10 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:02:10 Check angles 03:02:10 SkyScan query 03:02:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:02:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:02:11 Message to Master queued w/err=0: serial=102705 error=0 03:02:16 Received message from Master: op=Filter serial=102706 03:02:16 Color wheel filter change from 0 to 0 03:02:16 FLIGetFilterPos err=0 currentPosition=0 03:02:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:02:16 Filter is already there-color wheel unchanged 03:02:16 Received message from Master: op=Shutter serial=102707 03:02:16 Shutter LASER close 03:02:16 Received message from Camera: op=State serial=102709 03:02:16 GetSingleValue result=40 Value=cccccccc 03:02:16 SkyScan query 03:02:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:02:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:16 Parameters OK 03:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:16 Set A/D data flow result=40 03:02:16 Set A/D channel type result=40 03:02:16 Set A/D encoding result=40 03:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:16 Set channel filter=0.000000e+000 result=40 03:02:16 Config A/D Result=40 03:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:16 Get A/D filter: -9.255963e+061 result=40 03:02:16 Get A/D value=-858993460 result=40 03:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:16 Parameters OK 03:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:16 Set A/D data flow result=40 03:02:16 Set A/D channel type result=40 03:02:16 Set A/D encoding result=40 03:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:16 Set channel filter=0.000000e+000 result=40 03:02:16 Config A/D Result=40 03:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:16 Get A/D filter: -9.255963e+061 result=40 03:02:16 Get A/D value=-858993460 result=40 03:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:02:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:02:16 Aux= 03:02:16 Message to Camera, serial 102709 queued 03:02:53 Received message from Master: op=PointingHead serial=102722 03:02:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:02:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:02:54 Point started: ret=0 03:02:54 point_skyscan result=0 03:02:54 Check angles 03:02:54 SkyScan query 03:02:55 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.345<-17423 Statuses=0009 0009 03:02:55 Msec=0 True Az=109.14 Ze=-81.345 Az status=0009 Ze status=0009 03:02:55 Check angles 03:02:55 SkyScan query 03:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 03:02:56 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 03:02:56 Check angles 03:02:56 SkyScan query 03:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 03:02:56 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 03:02:57 Check angles 03:02:57 SkyScan query 03:02:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.225<-21615 Statuses=0008 0009 03:02:57 Msec=2250 True Az=112.995 Ze=-144.225 Az status=0008 Ze status=0009 03:02:57 Check angles 03:02:57 SkyScan query 03:02:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 03:02:58 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 03:02:58 Check angles 03:02:58 SkyScan query 03:02:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:02:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:02:59 Message to Master queued w/err=0: serial=102722 error=0 03:03:04 Received message from Master: op=Filter serial=102723 03:03:04 Color wheel filter change from 0 to 0 03:03:04 FLIGetFilterPos err=0 currentPosition=0 03:03:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:03:04 Filter is already there-color wheel unchanged 03:03:04 Received message from Master: op=Shutter serial=102724 03:03:04 Shutter LASER open 03:03:04 Received message from Camera: op=State serial=102726 03:03:04 GetSingleValue result=40 Value=cccccccc 03:03:04 SkyScan query 03:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:03:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:05 Parameters OK 03:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:05 Set A/D data flow result=40 03:03:05 Set A/D channel type result=40 03:03:05 Set A/D encoding result=40 03:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:05 Set channel filter=0.000000e+000 result=40 03:03:05 Config A/D Result=40 03:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:05 Get A/D filter: -9.255963e+061 result=40 03:03:05 Get A/D value=-858993460 result=40 03:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:05 Parameters OK 03:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:05 Set A/D data flow result=40 03:03:05 Set A/D channel type result=40 03:03:05 Set A/D encoding result=40 03:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:05 Set channel filter=0.000000e+000 result=40 03:03:05 Config A/D Result=40 03:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:05 Get A/D filter: -9.255963e+061 result=40 03:03:05 Get A/D value=-858993460 result=40 03:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:03:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:03:05 Aux= 03:03:05 Message to Camera, serial 102726 queued 03:03:13 Received message from Master: op=Shutter serial=102736 03:03:13 Shutter LASER close 03:03:13 Received message from Master: op=PointingHead serial=102740 03:03:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:03:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:03:14 Point started: ret=0 03:03:14 point_skyscan result=0 03:03:15 Check angles 03:03:15 SkyScan query 03:03:15 SkyScan query done: ret=0 az=89.475<-5965 ze=156.735<-1551 Statuses=0009 0009 03:03:15 Msec=0 True Az=89.475 Ze=156.735 Az status=0009 Ze status=0009 03:03:15 Check angles 03:03:15 SkyScan query 03:03:16 SkyScan query done: ret=0 az=72.015<-4801 ze=135.78<-2948 Statuses=0009 0009 03:03:16 Msec=750 True Az=72.015 Ze=135.78 Az status=0009 Ze status=0009 03:03:16 Check angles 03:03:16 SkyScan query 03:03:17 SkyScan query done: ret=0 az=54.675<-3645 ze=114.81<-4346 Statuses=0009 0009 03:03:17 Msec=1500 True Az=54.675 Ze=114.81 Az status=0009 Ze status=0009 03:03:17 Check angles 03:03:17 SkyScan query 03:03:17 SkyScan query done: ret=0 az=40.89<-2726 ze=93.87<-5742 Statuses=0009 0009 03:03:17 Msec=2250 True Az=40.89 Ze=93.87 Az status=0009 Ze status=0009 03:03:18 Check angles 03:03:18 SkyScan query 03:03:18 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 03:03:18 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 03:03:18 Check angles 03:03:18 SkyScan query 03:03:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 03:03:19 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 03:03:19 Check angles 03:03:19 SkyScan query 03:03:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:03:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:03:20 Message to Master queued w/err=0: serial=102740 error=0 03:03:25 Received message from Master: op=Filter serial=102741 03:03:25 Color wheel filter change from 0 to 0 03:03:25 FLIGetFilterPos err=0 currentPosition=0 03:03:25 FLIGetStepsRemaining err=0 RemainingSteps=0 03:03:25 Filter is already there-color wheel unchanged 03:03:25 Received message from Master: op=Shutter serial=102742 03:03:25 Shutter LASER close 03:03:25 Received message from Camera: op=State serial=102744 03:03:25 GetSingleValue result=40 Value=cccccccc 03:03:25 SkyScan query 03:03:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:03:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:26 Parameters OK 03:03:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:26 Set A/D data flow result=40 03:03:26 Set A/D channel type result=40 03:03:26 Set A/D encoding result=40 03:03:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:26 Set channel filter=0.000000e+000 result=40 03:03:26 Config A/D Result=40 03:03:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:26 Get A/D filter: -9.255963e+061 result=40 03:03:26 Get A/D value=-858993460 result=40 03:03:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:26 Parameters OK 03:03:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:26 Set A/D data flow result=40 03:03:26 Set A/D channel type result=40 03:03:26 Set A/D encoding result=40 03:03:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:26 Set channel filter=0.000000e+000 result=40 03:03:26 Config A/D Result=40 03:03:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:26 Get A/D filter: -9.255963e+061 result=40 03:03:26 Get A/D value=-858993460 result=40 03:03:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:03:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:03:26 Aux= 03:03:26 Message to Camera, serial 102744 queued 03:04:02 Received message from Master: op=PointingHead serial=102756 03:04:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:04:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:04:02 Point started: ret=0 03:04:02 point_skyscan result=0 03:04:03 Check angles 03:04:03 SkyScan query 03:04:03 SkyScan query done: ret=0 az=40.995<-2733 ze=21.345<-10577 Statuses=0008 0009 03:04:03 Msec=0 True Az=40.995 Ze=21.345 Az status=0008 Ze status=0009 03:04:04 Check angles 03:04:04 SkyScan query 03:04:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.075<-12005 Statuses=0008 0009 03:04:04 Msec=750 True Az=40.995 Ze=-0.075 Az status=0008 Ze status=0009 03:04:04 Check angles 03:04:04 SkyScan query 03:04:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.015<-13401 Statuses=0008 0009 03:04:05 Msec=1500 True Az=40.995 Ze=-21.015 Az status=0008 Ze status=0009 03:04:05 Check angles 03:04:05 SkyScan query 03:04:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:04:06 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:04:06 Check angles 03:04:06 SkyScan query 03:04:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:04:06 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:04:06 Message to Master queued w/err=0: serial=102756 error=0 03:04:11 Received message from Master: op=Filter serial=102757 03:04:11 Color wheel filter change from 0 to 0 03:04:11 FLIGetFilterPos err=0 currentPosition=0 03:04:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:04:11 Filter is already there-color wheel unchanged 03:04:12 Received message from Master: op=Shutter serial=102758 03:04:12 Shutter LASER close 03:04:12 Received message from Camera: op=State serial=102760 03:04:12 GetSingleValue result=40 Value=cccccccc 03:04:12 SkyScan query 03:04:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:04:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:12 Parameters OK 03:04:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:12 Set A/D data flow result=40 03:04:12 Set A/D channel type result=40 03:04:12 Set A/D encoding result=40 03:04:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:12 Set channel filter=0.000000e+000 result=40 03:04:12 Config A/D Result=40 03:04:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:12 Get A/D filter: -9.255963e+061 result=40 03:04:12 Get A/D value=-858993460 result=40 03:04:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:12 Parameters OK 03:04:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:12 Set A/D data flow result=40 03:04:12 Set A/D channel type result=40 03:04:12 Set A/D encoding result=40 03:04:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:12 Set channel filter=0.000000e+000 result=40 03:04:12 Config A/D Result=40 03:04:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:12 Get A/D filter: -9.255963e+061 result=40 03:04:12 Get A/D value=-858993460 result=40 03:04:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:04:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:04:12 Aux= 03:04:12 Message to Camera, serial 102760 queued 03:04:49 Received message from Master: op=PointingHead serial=102773 03:04:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:04:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:04:49 Point started: ret=0 03:04:49 point_skyscan result=0 03:04:50 Check angles 03:04:50 SkyScan query 03:04:51 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.415<-16561 Statuses=0009 0009 03:04:51 Msec=0 True Az=63.93 Ze=-68.415 Az status=0009 Ze status=0009 03:04:51 Check angles 03:04:51 SkyScan query 03:04:51 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.4<-17960 Statuses=0009 0009 03:04:51 Msec=750 True Az=81.51 Ze=-89.4 Az status=0009 Ze status=0009 03:04:52 Check angles 03:04:52 SkyScan query 03:04:52 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.325<-19355 Statuses=0009 0009 03:04:52 Msec=1500 True Az=99.09 Ze=-110.325 Az status=0009 Ze status=0009 03:04:52 Check angles 03:04:52 SkyScan query 03:04:53 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.4<-20760 Statuses=0009 0009 03:04:53 Msec=2250 True Az=116.49 Ze=-131.4 Az status=0009 Ze status=0009 03:04:53 Check angles 03:04:53 SkyScan query 03:04:54 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 03:04:54 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 03:04:54 Check angles 03:04:54 SkyScan query 03:04:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:04:54 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:04:54 Message to Master queued w/err=0: serial=102773 error=0 03:04:59 Received message from Master: op=Filter serial=102774 03:04:59 Color wheel filter change from 0 to 0 03:04:59 FLIGetFilterPos err=0 currentPosition=0 03:04:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:04:59 Filter is already there-color wheel unchanged 03:05:00 Received message from Master: op=Shutter serial=102775 03:05:00 Shutter LASER close 03:05:00 Received message from Camera: op=State serial=102777 03:05:00 GetSingleValue result=40 Value=cccccccc 03:05:00 SkyScan query 03:05:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:05:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:00 Parameters OK 03:05:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:00 Set A/D data flow result=40 03:05:00 Set A/D channel type result=40 03:05:00 Set A/D encoding result=40 03:05:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:00 Set channel filter=0.000000e+000 result=40 03:05:00 Config A/D Result=40 03:05:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:00 Get A/D filter: -9.255963e+061 result=40 03:05:00 Get A/D value=-858993460 result=40 03:05:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:00 Parameters OK 03:05:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:00 Set A/D data flow result=40 03:05:00 Set A/D channel type result=40 03:05:00 Set A/D encoding result=40 03:05:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:00 Set channel filter=0.000000e+000 result=40 03:05:00 Config A/D Result=40 03:05:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:00 Get A/D filter: -9.255963e+061 result=40 03:05:00 Get A/D value=-858993460 result=40 03:05:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:05:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:05:00 Aux= 03:05:00 Message to Camera, serial 102777 queued 03:05:37 Received message from Master: op=PointingHead serial=102790 03:05:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:05:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:05:37 Point started: ret=0 03:05:37 point_skyscan result=0 03:05:38 Check angles 03:05:38 SkyScan query 03:05:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 03:05:39 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 03:05:39 Check angles 03:05:39 SkyScan query 03:05:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:05:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:05:39 Message to Master queued w/err=0: serial=102790 error=0 03:05:44 Received message from Master: op=Filter serial=102791 03:05:44 Color wheel filter change from 0 to 0 03:05:44 FLIGetFilterPos err=0 currentPosition=0 03:05:44 FLIGetStepsRemaining err=0 RemainingSteps=0 03:05:44 Filter is already there-color wheel unchanged 03:05:45 Received message from Master: op=Shutter serial=102792 03:05:45 Shutter LASER open 03:05:45 Received message from Camera: op=State serial=102794 03:05:45 GetSingleValue result=40 Value=cccccccc 03:05:45 SkyScan query 03:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:05:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:45 Parameters OK 03:05:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 [UTC 2018-12-13 03:05:45] 03:05:45 Set A/D data flow result=40 03:05:45 Set A/D channel type result=40 03:05:45 Set A/D encoding result=40 03:05:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:45 Set channel filter=0.000000e+000 result=40 03:05:45 Config A/D Result=40 03:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:45 Get A/D filter: -9.255963e+061 result=40 03:05:45 Get A/D value=-858993460 result=40 03:05:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:45 Parameters OK 03:05:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:45 Set A/D data flow result=40 03:05:45 Set A/D channel type result=40 03:05:45 Set A/D encoding result=40 03:05:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:45 Set channel filter=0.000000e+000 result=40 03:05:45 Config A/D Result=40 03:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:45 Get A/D filter: -9.255963e+061 result=40 03:05:45 Get A/D value=-858993460 result=40 03:05:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:05:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:05:45 Aux= 03:05:45 Message to Camera, serial 102794 queued 03:05:54 Received message from Master: op=Shutter serial=102804 03:05:54 Shutter LASER close 03:05:54 Received message from Master: op=PointingHead serial=102808 03:05:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:05:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:05:55 Point started: ret=0 03:05:55 point_skyscan result=0 03:05:55 Check angles 03:05:55 SkyScan query 03:05:56 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.145<-21543 Statuses=0009 0009 03:05:56 Msec=0 True Az=135.96 Ze=-143.145 Az status=0009 Ze status=0009 03:05:56 Check angles 03:05:56 SkyScan query 03:05:57 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.16<-20144 Statuses=0009 0009 03:05:57 Msec=750 True Az=153.585 Ze=-122.16 Az status=0009 Ze status=0009 03:05:57 Check angles 03:05:57 SkyScan query 03:05:58 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.8<-18720 Statuses=0009 0009 03:05:58 Msec=1500 True Az=171.435 Ze=-100.8 Az status=0009 Ze status=0009 03:05:58 Check angles 03:05:58 SkyScan query 03:05:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 03:05:58 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 03:05:58 Check angles 03:05:58 SkyScan query 03:05:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.905<-15927 Statuses=0008 0009 03:05:59 Msec=3000 True Az=176.01 Ze=-58.905 Az status=0008 Ze status=0009 03:05:59 Check angles 03:05:59 SkyScan query 03:06:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:06:00 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:06:00 Message to Master queued w/err=0: serial=102808 error=0 03:06:05 Received message from Master: op=Filter serial=102809 03:06:05 Color wheel filter change from 0 to 0 03:06:05 FLIGetFilterPos err=0 currentPosition=0 03:06:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:06:05 Filter is already there-color wheel unchanged 03:06:05 Received message from Master: op=Shutter serial=102810 03:06:05 Shutter LASER close 03:06:05 Received message from Camera: op=State serial=102812 03:06:05 GetSingleValue result=40 Value=cccccccc 03:06:05 SkyScan query 03:06:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:06:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:06 Parameters OK 03:06:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:06 Set A/D data flow result=40 03:06:06 Set A/D channel type result=40 03:06:06 Set A/D encoding result=40 03:06:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:06 Set channel filter=0.000000e+000 result=40 03:06:06 Config A/D Result=40 03:06:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:06 Get A/D filter: -9.255963e+061 result=40 03:06:06 Get A/D value=-858993460 result=40 03:06:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:06 Parameters OK 03:06:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:06 Set A/D data flow result=40 03:06:06 Set A/D channel type result=40 03:06:06 Set A/D encoding result=40 03:06:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:06 Set channel filter=0.000000e+000 result=40 03:06:06 Config A/D Result=40 03:06:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:06 Get A/D filter: -9.255963e+061 result=40 03:06:06 Get A/D value=-858993460 result=40 03:06:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:06:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:06:06 Aux= 03:06:06 Message to Camera, serial 102812 queued 03:06:43 Received message from Master: op=PointingHead serial=102825 03:06:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:06:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:06:43 Point started: ret=0 03:06:43 point_skyscan result=0 03:06:44 Check angles 03:06:44 SkyScan query 03:06:44 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.885<-13459 Statuses=0009 0009 03:06:44 Msec=0 True Az=152.955 Ze=-21.885 Az status=0009 Ze status=0009 03:06:44 Check angles 03:06:44 SkyScan query 03:06:45 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.87<-12058 Statuses=0009 0009 03:06:45 Msec=750 True Az=135.435 Ze=-0.87 Az status=0009 Ze status=0009 03:06:45 Check angles 03:06:45 SkyScan query 03:06:46 SkyScan query done: ret=0 az=117.975<-7865 ze=20.055<-10663 Statuses=0009 0009 03:06:46 Msec=1500 True Az=117.975 Ze=20.055 Az status=0009 Ze status=0009 03:06:46 Check angles 03:06:46 SkyScan query 03:06:46 SkyScan query done: ret=0 az=100.575<-6705 ze=41.025<-9265 Statuses=0009 0009 03:06:46 Msec=2250 True Az=100.575 Ze=41.025 Az status=0009 Ze status=0009 03:06:47 Check angles 03:06:47 SkyScan query 03:06:47 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 03:06:47 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 03:06:47 Check angles 03:06:47 SkyScan query 03:06:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:06:48 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:06:48 Message to Master queued w/err=0: serial=102825 error=0 03:06:53 Received message from Master: op=Filter serial=102826 03:06:53 Color wheel filter change from 0 to 0 03:06:53 FLIGetFilterPos err=0 currentPosition=0 03:06:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:06:53 Filter is already there-color wheel unchanged 03:06:53 Received message from Master: op=Shutter serial=102827 03:06:53 Shutter LASER close 03:06:53 Received message from Camera: op=State serial=102829 03:06:53 GetSingleValue result=40 Value=cccccccc 03:06:53 SkyScan query 03:06:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:06:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:54 Parameters OK 03:06:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:54 Set A/D data flow result=40 03:06:54 Set A/D channel type result=40 03:06:54 Set A/D encoding result=40 03:06:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:54 Set channel filter=0.000000e+000 result=40 03:06:54 Config A/D Result=40 03:06:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:54 Get A/D filter: -9.255963e+061 result=40 03:06:54 Get A/D value=-858993460 result=40 03:06:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:54 Parameters OK 03:06:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:54 Set A/D data flow result=40 03:06:54 Set A/D channel type result=40 03:06:54 Set A/D encoding result=40 03:06:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:54 Set channel filter=0.000000e+000 result=40 03:06:54 Config A/D Result=40 03:06:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:54 Get A/D filter: -9.255963e+061 result=40 03:06:54 Get A/D value=-858993460 result=40 03:06:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:06:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:06:54 Aux= 03:06:54 Message to Camera, serial 102829 queued 03:07:31 Received message from Master: op=PointingHead serial=102842 03:07:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:07:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:07:31 Point started: ret=0 03:07:31 point_skyscan result=0 03:07:32 Check angles 03:07:32 SkyScan query 03:07:32 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 03:07:32 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 03:07:32 Check angles 03:07:32 SkyScan query 03:07:33 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 03:07:33 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 03:07:33 Check angles 03:07:33 SkyScan query 03:07:34 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 03:07:34 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 03:07:34 Check angles 03:07:34 SkyScan query 03:07:35 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 03:07:35 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 03:07:35 Check angles 03:07:35 SkyScan query 03:07:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 03:07:35 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 03:07:35 Check angles 03:07:35 SkyScan query 03:07:36 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:07:36 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:07:36 Message to Master queued w/err=0: serial=102842 error=0 03:07:41 Received message from Master: op=Filter serial=102843 03:07:41 Color wheel filter change from 0 to 0 03:07:41 FLIGetFilterPos err=0 currentPosition=0 03:07:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:07:41 Filter is already there-color wheel unchanged 03:07:41 Received message from Master: op=Shutter serial=102844 03:07:41 Shutter LASER close 03:07:41 Received message from Camera: op=State serial=102846 03:07:41 GetSingleValue result=40 Value=cccccccc 03:07:41 SkyScan query 03:07:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:07:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:42 Parameters OK 03:07:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:42 Set A/D data flow result=40 03:07:42 Set A/D channel type result=40 03:07:42 Set A/D encoding result=40 03:07:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:42 Set channel filter=0.000000e+000 result=40 03:07:42 Config A/D Result=40 03:07:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:42 Get A/D filter: -9.255963e+061 result=40 03:07:42 Get A/D value=-858993460 result=40 03:07:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:42 Parameters OK 03:07:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:42 Set A/D data flow result=40 03:07:42 Set A/D channel type result=40 03:07:42 Set A/D encoding result=40 03:07:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:42 Set channel filter=0.000000e+000 result=40 03:07:42 Config A/D Result=40 03:07:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:42 Get A/D filter: -9.255963e+061 result=40 03:07:42 Get A/D value=-858993460 result=40 03:07:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:07:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:07:42 Aux= 03:07:42 Message to Camera, serial 102846 queued 03:08:18 Received message from Master: op=PointingHead serial=102858 03:08:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:08:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:08:18 Point started: ret=0 03:08:18 point_skyscan result=0 03:08:19 Check angles 03:08:19 SkyScan query 03:08:19 SkyScan query done: ret=0 az=152.79<-10186 ze=8.535<-11431 Statuses=0009 0009 03:08:19 Msec=0 True Az=152.79 Ze=8.535 Az status=0009 Ze status=0009 03:08:20 Check angles 03:08:20 SkyScan query 03:08:20 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.39<-12826 Statuses=0009 0009 03:08:20 Msec=750 True Az=135.345 Ze=-12.39 Az status=0009 Ze status=0009 03:08:20 Check angles 03:08:20 SkyScan query 03:08:21 SkyScan query done: ret=0 az=117.885<-7859 ze=-33.405<-14227 Statuses=0009 0009 03:08:21 Msec=1500 True Az=117.885 Ze=-33.405 Az status=0009 Ze status=0009 03:08:21 Check angles 03:08:21 SkyScan query 03:08:22 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.54<-15436 Statuses=0009 0009 03:08:22 Msec=2250 True Az=100.485 Ze=-51.54 Az status=0009 Ze status=0009 03:08:22 Check angles 03:08:22 SkyScan query 03:08:22 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 03:08:22 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 03:08:23 Check angles 03:08:23 SkyScan query 03:08:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:08:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:08:23 Message to Master queued w/err=0: serial=102858 error=0 03:08:28 Received message from Master: op=Filter serial=102859 03:08:28 Color wheel filter change from 0 to 0 03:08:28 FLIGetFilterPos err=0 currentPosition=0 03:08:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:08:28 Filter is already there-color wheel unchanged 03:08:28 Received message from Master: op=Shutter serial=102860 03:08:28 Shutter LASER close 03:08:28 Received message from Camera: op=State serial=102862 03:08:28 GetSingleValue result=40 Value=cccccccc 03:08:28 SkyScan query 03:08:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:08:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:29 Parameters OK 03:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:29 Set A/D data flow result=40 03:08:29 Set A/D channel type result=40 03:08:29 Set A/D encoding result=40 03:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:29 Set channel filter=0.000000e+000 result=40 03:08:29 Config A/D Result=40 03:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:29 Get A/D filter: -9.255963e+061 result=40 03:08:29 Get A/D value=-858993460 result=40 03:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:29 Parameters OK 03:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:29 Set A/D data flow result=40 03:08:29 Set A/D channel type result=40 03:08:29 Set A/D encoding result=40 03:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:29 Set channel filter=0.000000e+000 result=40 03:08:29 Config A/D Result=40 03:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:29 Get A/D filter: -9.255963e+061 result=40 03:08:29 Get A/D value=-858993460 result=40 03:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:08:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:08:29 Aux= 03:08:29 Message to Camera, serial 102862 queued 03:09:06 Received message from Master: op=PointingHead serial=102875 03:09:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:09:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:09:06 Point started: ret=0 03:09:06 point_skyscan result=0 03:09:07 Check angles 03:09:07 SkyScan query 03:09:07 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.24<-17416 Statuses=0009 0009 03:09:07 Msec=0 True Az=108.915 Ze=-81.24 Az status=0009 Ze status=0009 03:09:08 Check angles 03:09:08 SkyScan query 03:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 03:09:08 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 03:09:08 Check angles 03:09:08 SkyScan query 03:09:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 03:09:09 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 03:09:09 Check angles 03:09:09 SkyScan query 03:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.105<-21607 Statuses=0008 0009 03:09:10 Msec=2250 True Az=112.995 Ze=-144.105 Az status=0008 Ze status=0009 03:09:10 Check angles 03:09:10 SkyScan query 03:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 03:09:10 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 03:09:11 Check angles 03:09:11 SkyScan query 03:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:09:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:09:11 Message to Master queued w/err=0: serial=102875 error=0 03:09:16 Received message from Master: op=Filter serial=102876 03:09:16 Color wheel filter change from 0 to 0 03:09:16 FLIGetFilterPos err=0 currentPosition=0 03:09:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:09:16 Filter is already there-color wheel unchanged 03:09:16 Received message from Master: op=Shutter serial=102877 03:09:16 Shutter LASER open 03:09:17 Received message from Camera: op=State serial=102879 03:09:17 GetSingleValue result=40 Value=cccccccc 03:09:17 SkyScan query 03:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:09:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:17 Parameters OK 03:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:17 Set A/D data flow result=40 03:09:17 Set A/D channel type result=40 03:09:17 Set A/D encoding result=40 03:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:17 Set channel filter=0.000000e+000 result=40 03:09:17 Config A/D Result=40 03:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:17 Get A/D filter: -9.255963e+061 result=40 03:09:17 Get A/D value=-858993460 result=40 03:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:17 Parameters OK 03:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:17 Set A/D data flow result=40 03:09:17 Set A/D channel type result=40 03:09:17 Set A/D encoding result=40 03:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:17 Set channel filter=0.000000e+000 result=40 03:09:17 Config A/D Result=40 03:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:17 Get A/D filter: -9.255963e+061 result=40 03:09:17 Get A/D value=-858993460 result=40 03:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:09:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:09:17 Aux= 03:09:17 Message to Camera, serial 102879 queued 03:09:26 Received message from Master: op=Shutter serial=102889 03:09:26 Shutter LASER close 03:09:26 Received message from Master: op=PointingHead serial=102893 03:09:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:09:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:09:26 Point started: ret=0 03:09:26 point_skyscan result=0 03:09:27 Check angles 03:09:27 SkyScan query 03:09:28 SkyScan query done: ret=0 az=90.12<-6008 ze=157.5<-1500 Statuses=0009 0009 03:09:28 Msec=0 True Az=90.12 Ze=157.5 Az status=0009 Ze status=0009 03:09:28 Check angles 03:09:28 SkyScan query 03:09:28 SkyScan query done: ret=0 az=72.69<-4846 ze=136.515<-2899 Statuses=0009 0009 03:09:28 Msec=750 True Az=72.69 Ze=136.515 Az status=0009 Ze status=0009 03:09:29 Check angles 03:09:29 SkyScan query 03:09:29 SkyScan query done: ret=0 az=55.095<-3673 ze=115.59<-4294 Statuses=0009 0009 03:09:29 Msec=1500 True Az=55.095 Ze=115.59 Az status=0009 Ze status=0009 03:09:29 Check angles 03:09:29 SkyScan query 03:09:30 SkyScan query done: ret=0 az=40.875<-2725 ze=94.56<-5696 Statuses=0009 0009 03:09:30 Msec=2250 True Az=40.875 Ze=94.56 Az status=0009 Ze status=0009 03:09:30 Check angles 03:09:30 SkyScan query 03:09:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.695<-7087 Statuses=0008 0009 03:09:31 Msec=3000 True Az=40.995 Ze=73.695 Az status=0008 Ze status=0009 03:09:31 Check angles 03:09:31 SkyScan query 03:09:31 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 03:09:31 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 03:09:32 Check angles 03:09:32 SkyScan query 03:09:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:09:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:09:32 Message to Master queued w/err=0: serial=102893 error=0 03:09:37 Received message from Master: op=Filter serial=102894 03:09:37 Color wheel filter change from 0 to 0 03:09:37 FLIGetFilterPos err=0 currentPosition=0 03:09:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:09:37 Filter is already there-color wheel unchanged 03:09:37 Received message from Master: op=Shutter serial=102895 03:09:37 Shutter LASER close 03:09:38 Received message from Camera: op=State serial=102897 03:09:38 GetSingleValue result=40 Value=cccccccc 03:09:38 SkyScan query 03:09:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:09:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:38 Parameters OK 03:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:38 Set A/D data flow result=40 03:09:38 Set A/D channel type result=40 03:09:38 Set A/D encoding result=40 03:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:38 Set channel filter=0.000000e+000 result=40 03:09:38 Config A/D Result=40 03:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:38 Get A/D filter: -9.255963e+061 result=40 03:09:38 Get A/D value=-858993460 result=40 03:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:38 Parameters OK 03:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:38 Set A/D data flow result=40 03:09:38 Set A/D channel type result=40 03:09:38 Set A/D encoding result=40 03:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:38 Set channel filter=0.000000e+000 result=40 03:09:38 Config A/D Result=40 03:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:38 Get A/D filter: -9.255963e+061 result=40 03:09:38 Get A/D value=-858993460 result=40 03:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:09:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:09:38 Aux= 03:09:38 Message to Camera, serial 102897 queued 03:10:15 Received message from Master: op=PointingHead serial=102910 03:10:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:10:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:10:15 Point started: ret=0 03:10:15 point_skyscan result=0 03:10:16 Check angles 03:10:16 SkyScan query 03:10:17 SkyScan query done: ret=0 az=40.995<-2733 ze=21.51<-10566 Statuses=0008 0009 03:10:17 Msec=0 True Az=40.995 Ze=21.51 Az status=0008 Ze status=0009 03:10:17 Check angles 03:10:17 SkyScan query 03:10:18 SkyScan query done: ret=0 az=41.01<-2734 ze=0.09<-11994 Statuses=0008 0009 03:10:18 Msec=750 True Az=41.01 Ze=0.09 Az status=0008 Ze status=0009 03:10:18 Check angles 03:10:18 SkyScan query 03:10:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.85<-13390 Statuses=0008 0009 03:10:18 Msec=1500 True Az=40.995 Ze=-20.85 Az status=0008 Ze status=0009 03:10:18 Check angles 03:10:18 SkyScan query 03:10:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:10:19 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:10:19 Check angles 03:10:19 SkyScan query 03:10:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:10:20 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:10:20 Message to Master queued w/err=0: serial=102910 error=0 03:10:25 Received message from Master: op=Filter serial=102911 03:10:25 Color wheel filter change from 0 to 0 03:10:25 FLIGetFilterPos err=0 currentPosition=0 03:10:25 FLIGetStepsRemaining err=0 RemainingSteps=0 03:10:25 Filter is already there-color wheel unchanged 03:10:25 Received message from Master: op=Shutter serial=102912 03:10:25 Shutter LASER close 03:10:25 Received message from Camera: op=State serial=102914 03:10:25 GetSingleValue result=40 Value=cccccccc 03:10:25 SkyScan query 03:10:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:10:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:26 Parameters OK 03:10:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:26 Set A/D data flow result=40 03:10:26 Set A/D channel type result=40 03:10:26 Set A/D encoding result=40 03:10:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:26 Set channel filter=0.000000e+000 result=40 03:10:26 Config A/D Result=40 03:10:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:26 Get A/D filter: -9.255963e+061 result=40 03:10:26 Get A/D value=-858993460 result=40 03:10:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:26 Parameters OK 03:10:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:26 Set A/D data flow result=40 03:10:26 Set A/D channel type result=40 03:10:26 Set A/D encoding result=40 03:10:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:26 Set channel filter=0.000000e+000 result=40 03:10:26 Config A/D Result=40 03:10:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:26 Get A/D filter: -9.255963e+061 result=40 03:10:26 Get A/D value=-858993460 result=40 03:10:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:10:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:10:26 Aux= 03:10:26 Message to Camera, serial 102914 queued 03:11:02 Received message from Master: op=PointingHead serial=102927 03:11:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:11:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:11:03 Point started: ret=0 03:11:03 point_skyscan result=0 03:11:04 Check angles 03:11:04 SkyScan query 03:11:04 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.625<-16575 Statuses=0009 0009 03:11:04 Msec=0 True Az=64.17 Ze=-68.625 Az status=0009 Ze status=0009 03:11:04 Check angles 03:11:04 SkyScan query 03:11:05 SkyScan query done: ret=0 az=82.335<-5489 ze=-90.015<-18001 Statuses=0009 0009 03:11:05 Msec=750 True Az=82.335 Ze=-90.015 Az status=0009 Ze status=0009 03:11:05 Check angles 03:11:05 SkyScan query 03:11:06 SkyScan query done: ret=0 az=99.72<-6648 ze=-110.985<-19399 Statuses=0009 0009 03:11:06 Msec=1500 True Az=99.72 Ze=-110.985 Az status=0009 Ze status=0009 03:11:06 Check angles 03:11:06 SkyScan query 03:11:06 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.925<-20795 Statuses=0009 0009 03:11:06 Msec=2250 True Az=117.105 Ze=-131.925 Az status=0009 Ze status=0009 03:11:07 Check angles 03:11:07 SkyScan query 03:11:07 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 03:11:07 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 03:11:07 Check angles 03:11:07 SkyScan query 03:11:08 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:11:08 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:11:08 Message to Master queued w/err=0: serial=102927 error=0 03:11:13 Received message from Master: op=Filter serial=102928 03:11:13 Color wheel filter change from 0 to 0 03:11:13 FLIGetFilterPos err=0 currentPosition=0 03:11:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:11:13 Filter is already there-color wheel unchanged 03:11:13 Received message from Master: op=Shutter serial=102929 03:11:13 Shutter LASER close 03:11:13 Received message from Camera: op=State serial=102931 03:11:13 GetSingleValue result=40 Value=cccccccc 03:11:13 SkyScan query 03:11:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:11:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:14 Parameters OK 03:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:14 Set A/D data flow result=40 03:11:14 Set A/D channel type result=40 03:11:14 Set A/D encoding result=40 03:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:14 Set channel filter=0.000000e+000 result=40 03:11:14 Config A/D Result=40 03:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:14 Get A/D filter: -9.255963e+061 result=40 03:11:14 Get A/D value=-858993460 result=40 03:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:14 Parameters OK 03:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:14 Set A/D data flow result=40 03:11:14 Set A/D channel type result=40 03:11:14 Set A/D encoding result=40 03:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:14 Set channel filter=0.000000e+000 result=40 03:11:14 Config A/D Result=40 03:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:14 Get A/D filter: -9.255963e+061 result=40 03:11:14 Get A/D value=-858993460 result=40 03:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:11:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:11:14 Aux= 03:11:14 Message to Camera, serial 102931 queued 03:11:50 Received message from Master: op=PointingHead serial=102944 03:11:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:11:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:11:51 Point started: ret=0 03:11:51 point_skyscan result=0 03:11:52 Check angles 03:11:52 SkyScan query 03:11:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 03:11:52 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 03:11:52 Check angles 03:11:52 SkyScan query 03:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:11:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:11:53 Message to Master queued w/err=0: serial=102944 error=0 03:11:58 Received message from Master: op=Filter serial=102945 03:11:58 Color wheel filter change from 0 to 0 03:11:58 FLIGetFilterPos err=0 currentPosition=0 03:11:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:11:58 Filter is already there-color wheel unchanged 03:11:58 Received message from Master: op=Shutter serial=102946 03:11:58 Shutter LASER open 03:11:58 Received message from Camera: op=State serial=102948 03:11:58 GetSingleValue result=40 Value=cccccccc 03:11:58 SkyScan query 03:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:11:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:59 Parameters OK 03:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:59 Set A/D data flow result=40 03:11:59 Set A/D channel type result=40 03:11:59 Set A/D encoding result=40 03:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:59 Set channel filter=0.000000e+000 result=40 03:11:59 Config A/D Result=40 03:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:59 Get A/D filter: -9.255963e+061 result=40 03:11:59 Get A/D value=-858993460 result=40 03:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:59 Parameters OK 03:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:59 Set A/D data flow result=40 03:11:59 Set A/D channel type result=40 03:11:59 Set A/D encoding result=40 03:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:59 Set channel filter=0.000000e+000 result=40 03:11:59 Config A/D Result=40 03:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:59 Get A/D filter: -9.255963e+061 result=40 03:11:59 Get A/D value=-858993460 result=40 03:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:11:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:11:59 Aux= 03:11:59 Message to Camera, serial 102948 queued 03:12:07 Received message from Master: op=Shutter serial=102958 03:12:07 Shutter LASER close 03:12:08 Received message from Master: op=PointingHead serial=102962 03:12:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:12:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:12:08 Point started: ret=0 03:12:08 point_skyscan result=0 03:12:09 Check angles 03:12:09 SkyScan query 03:12:10 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.25<-21550 Statuses=0009 0009 03:12:10 Msec=0 True Az=135.96 Ze=-143.25 Az status=0009 Ze status=0009 03:12:10 Check angles 03:12:10 SkyScan query 03:12:10 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.28<-20152 Statuses=0009 0009 03:12:10 Msec=750 True Az=153.375 Ze=-122.28 Az status=0009 Ze status=0009 03:12:11 Check angles 03:12:11 SkyScan query 03:12:11 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.905<-18727 Statuses=0009 0009 03:12:11 Msec=1500 True Az=171.27 Ze=-100.905 Az status=0009 Ze status=0009 03:12:11 Check angles 03:12:11 SkyScan query 03:12:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.38<-17292 Statuses=0008 0009 03:12:12 Msec=2250 True Az=176.01 Ze=-79.38 Az status=0008 Ze status=0009 03:12:12 Check angles 03:12:12 SkyScan query 03:12:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.515<-15901 Statuses=0008 0009 03:12:13 Msec=3000 True Az=176.01 Ze=-58.515 Az status=0008 Ze status=0009 03:12:13 Check angles 03:12:13 SkyScan query 03:12:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:12:13 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:12:13 Message to Master queued w/err=0: serial=102962 error=0 03:12:18 Received message from Master: op=Filter serial=102963 03:12:18 Color wheel filter change from 0 to 0 03:12:18 FLIGetFilterPos err=0 currentPosition=0 03:12:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:18 Filter is already there-color wheel unchanged 03:12:19 Received message from Master: op=Shutter serial=102964 03:12:19 Shutter LASER close 03:12:19 Received message from Camera: op=State serial=102966 03:12:19 GetSingleValue result=40 Value=cccccccc 03:12:19 SkyScan query 03:12:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:12:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:19 Parameters OK 03:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:19 Set A/D data flow result=40 03:12:19 Set A/D channel type result=40 03:12:19 Set A/D encoding result=40 03:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:19 Set channel filter=0.000000e+000 result=40 03:12:19 Config A/D Result=40 03:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:19 Get A/D filter: -9.255963e+061 result=40 03:12:19 Get A/D value=-858993460 result=40 03:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:19 Parameters OK 03:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:19 Set A/D data flow result=40 03:12:19 Set A/D channel type result=40 03:12:19 Set A/D encoding result=40 03:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:19 Set channel filter=0.000000e+000 result=40 03:12:19 Config A/D Result=40 03:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:19 Get A/D filter: -9.255963e+061 result=40 03:12:19 Get A/D value=-858993460 result=40 03:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:19 Aux= 03:12:19 Message to Camera, serial 102966 queued 03:12:56 Received message from Master: op=PointingHead serial=102979 03:12:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:12:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:12:56 Point started: ret=0 03:12:56 point_skyscan result=0 03:12:57 Check angles 03:12:57 SkyScan query 03:12:58 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.02<-13468 Statuses=0009 0009 03:12:58 Msec=0 True Az=153.18 Ze=-22.02 Az status=0009 Ze status=0009 03:12:58 Check angles 03:12:58 SkyScan query 03:12:59 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.57<-12038 Statuses=0009 0009 03:12:59 Msec=750 True Az=135.36 Ze=-0.57 Az status=0009 Ze status=0009 03:12:59 Check angles 03:12:59 SkyScan query 03:12:59 SkyScan query done: ret=0 az=117.795<-7853 ze=20.355<-10643 Statuses=0009 0009 03:12:59 Msec=1500 True Az=117.795 Ze=20.355 Az status=0009 Ze status=0009 03:12:59 Check angles 03:12:59 SkyScan query 03:13:00 SkyScan query done: ret=0 az=100.41<-6694 ze=41.355<-9243 Statuses=0009 0009 03:13:00 Msec=2250 True Az=100.41 Ze=41.355 Az status=0009 Ze status=0009 03:13:00 Check angles 03:13:00 SkyScan query 03:13:01 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 03:13:01 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 03:13:01 Check angles 03:13:01 SkyScan query 03:13:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:13:02 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:13:02 Message to Master queued w/err=0: serial=102979 error=0 03:13:07 Received message from Master: op=Filter serial=102980 03:13:07 Color wheel filter change from 0 to 0 03:13:07 FLIGetFilterPos err=0 currentPosition=0 03:13:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:07 Filter is already there-color wheel unchanged 03:13:07 Received message from Master: op=Shutter serial=102981 03:13:07 Shutter LASER close 03:13:07 Received message from Camera: op=State serial=102983 03:13:07 GetSingleValue result=40 Value=cccccccc 03:13:07 SkyScan query 03:13:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:07 Parameters OK 03:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:07 Set A/D data flow result=40 03:13:07 Set A/D channel type result=40 03:13:07 Set A/D encoding result=40 03:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:07 Set channel filter=0.000000e+000 result=40 03:13:07 Config A/D Result=40 03:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:07 Get A/D filter: -9.255963e+061 result=40 03:13:07 Get A/D value=-858993460 result=40 03:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:07 Parameters OK 03:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:07 Set A/D data flow result=40 03:13:07 Set A/D channel type result=40 03:13:07 Set A/D encoding result=40 03:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:07 Set channel filter=0.000000e+000 result=40 03:13:07 Config A/D Result=40 03:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:07 Get A/D filter: -9.255963e+061 result=40 03:13:07 Get A/D value=-858993460 result=40 03:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:07 Aux= 03:13:07 Message to Camera, serial 102983 queued 03:13:44 Received message from Master: op=PointingHead serial=102996 03:13:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:13:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:13:45 Point started: ret=0 03:13:45 point_skyscan result=0 03:13:45 Check angles 03:13:45 SkyScan query 03:13:46 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 03:13:46 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 03:13:46 Check angles 03:13:46 SkyScan query 03:13:47 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 03:13:47 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 03:13:47 Check angles 03:13:47 SkyScan query 03:13:47 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 03:13:47 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 03:13:48 Check angles 03:13:48 SkyScan query 03:13:48 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 03:13:48 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 03:13:48 Check angles 03:13:48 SkyScan query 03:13:49 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:13:49 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:13:49 Check angles 03:13:49 SkyScan query 03:13:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:13:50 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:13:50 Message to Master queued w/err=0: serial=102996 error=0 03:13:55 Received message from Master: op=Filter serial=102997 03:13:55 Color wheel filter change from 0 to 0 03:13:55 FLIGetFilterPos err=0 currentPosition=0 03:13:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:55 Filter is already there-color wheel unchanged 03:13:55 Received message from Master: op=Shutter serial=102998 03:13:55 Shutter LASER close 03:13:55 Received message from Camera: op=State serial=103000 03:13:55 GetSingleValue result=40 Value=cccccccc 03:13:55 SkyScan query 03:13:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:13:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:55 Parameters OK 03:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:55 Set A/D data flow result=40 03:13:55 Set A/D channel type result=40 03:13:55 Set A/D encoding result=40 03:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:55 Set channel filter=0.000000e+000 result=40 03:13:55 Config A/D Result=40 03:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:55 Get A/D filter: -9.255963e+061 result=40 03:13:55 Get A/D value=-858993460 result=40 03:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:55 Parameters OK 03:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:55 Set A/D data flow result=40 03:13:55 Set A/D channel type result=40 03:13:55 Set A/D encoding result=40 03:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:55 Set channel filter=0.000000e+000 result=40 03:13:55 Config A/D Result=40 03:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:55 Get A/D filter: -9.255963e+061 result=40 03:13:55 Get A/D value=-858993460 result=40 03:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:55 Aux= 03:13:55 Message to Camera, serial 103000 queued 03:14:32 Received message from Master: op=PointingHead serial=103013 03:14:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:14:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:14:33 Point started: ret=0 03:14:33 point_skyscan result=0 03:14:33 Check angles 03:14:33 SkyScan query 03:14:34 SkyScan query done: ret=0 az=153.135<-10209 ze=8.775<-11415 Statuses=0009 0009 03:14:34 Msec=0 True Az=153.135 Ze=8.775 Az status=0009 Ze status=0009 03:14:34 Check angles 03:14:34 SkyScan query 03:14:35 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.12<-12808 Statuses=0009 0009 03:14:35 Msec=750 True Az=135.705 Ze=-12.12 Az status=0009 Ze status=0009 03:14:35 Check angles 03:14:35 SkyScan query 03:14:35 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.06<-14204 Statuses=0009 0009 03:14:35 Msec=1500 True Az=118.11 Ze=-33.06 Az status=0009 Ze status=0009 03:14:36 Check angles 03:14:36 SkyScan query 03:14:36 SkyScan query done: ret=0 az=100.71<-6714 ze=-51.51<-15434 Statuses=0009 0009 03:14:36 Msec=2250 True Az=100.71 Ze=-51.51 Az status=0009 Ze status=0009 03:14:36 Check angles 03:14:36 SkyScan query 03:14:37 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:14:37 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:14:37 Check angles 03:14:37 SkyScan query 03:14:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:14:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:14:38 Message to Master queued w/err=0: serial=103013 error=0 03:14:43 Received message from Master: op=Filter serial=103014 03:14:43 Color wheel filter change from 0 to 0 03:14:43 FLIGetFilterPos err=0 currentPosition=0 03:14:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:43 Filter is already there-color wheel unchanged 03:14:43 Received message from Master: op=Shutter serial=103015 03:14:43 Shutter LASER close 03:14:43 Received message from Camera: op=State serial=103017 03:14:43 GetSingleValue result=40 Value=cccccccc 03:14:43 SkyScan query 03:14:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:14:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:43 Parameters OK 03:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:43 Set A/D data flow result=40 03:14:43 Set A/D channel type result=40 03:14:43 Set A/D encoding result=40 03:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:43 Set channel filter=0.000000e+000 result=40 03:14:43 Config A/D Result=40 03:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:43 Get A/D filter: -9.255963e+061 result=40 03:14:43 Get A/D value=-858993460 result=40 03:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:43 Parameters OK 03:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:43 Set A/D data flow result=40 03:14:43 Set A/D channel type result=40 03:14:43 Set A/D encoding result=40 03:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:43 Set channel filter=0.000000e+000 result=40 03:14:43 Config A/D Result=40 03:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:43 Get A/D filter: -9.255963e+061 result=40 03:14:43 Get A/D value=-858993460 result=40 03:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:43 Aux= 03:14:43 Message to Camera, serial 103017 queued 03:15:20 Received message from Master: op=PointingHead serial=103030 03:15:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:15:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:15:21 Point started: ret=0 03:15:21 point_skyscan result=0 03:15:21 Check angles 03:15:21 SkyScan query 03:15:22 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.135<-17409 Statuses=0009 0009 03:15:22 Msec=0 True Az=108.87 Ze=-81.135 Az status=0009 Ze status=0009 03:15:22 Check angles 03:15:22 SkyScan query 03:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 03:15:23 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 03:15:23 Check angles 03:15:23 SkyScan query 03:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 03:15:23 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 03:15:24 Check angles 03:15:24 SkyScan query 03:15:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 03:15:24 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 03:15:24 Check angles 03:15:24 SkyScan query 03:15:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 03:15:25 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 03:15:25 Check angles 03:15:25 SkyScan query 03:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:15:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:15:26 Message to Master queued w/err=0: serial=103030 error=0 03:15:27 Received message from Master: op=Identify serial=103031 03:15:31 Received message from Master: op=Filter serial=103034 03:15:31 Color wheel filter change from 0 to 0 03:15:31 FLIGetFilterPos err=0 currentPosition=0 03:15:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:31 Filter is already there-color wheel unchanged 03:15:31 Received message from Master: op=Shutter serial=103035 03:15:31 Shutter LASER open 03:15:31 Received message from Camera: op=State serial=103037 03:15:31 GetSingleValue result=40 Value=cccccccc 03:15:31 SkyScan query 03:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:15:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:32 Parameters OK 03:15:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:32 Set A/D data flow result=40 03:15:32 Set A/D channel type result=40 03:15:32 Set A/D encoding result=40 03:15:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:32 Set channel filter=0.000000e+000 result=40 03:15:32 Config A/D Result=40 03:15:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:32 Get A/D filter: -9.255963e+061 result=40 03:15:32 Get A/D value=-858993460 result=40 03:15:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:32 Parameters OK 03:15:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:32 Set A/D data flow result=40 [UTC 2018-12-13 03:15:32] 03:15:32 Set A/D channel type result=40 03:15:32 Set A/D encoding result=40 03:15:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:32 Set channel filter=0.000000e+000 result=40 03:15:32 Config A/D Result=40 03:15:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:32 Get A/D filter: -9.255963e+061 result=40 03:15:32 Get A/D value=-858993460 result=40 03:15:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:32 Aux= 03:15:32 Message to Camera, serial 103037 queued 03:15:40 Received message from Master: op=Shutter serial=103047 03:15:40 Shutter LASER close 03:15:41 Received message from Master: op=PointingHead serial=103051 03:15:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:15:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:15:41 Point started: ret=0 03:15:41 point_skyscan result=0 03:15:42 Check angles 03:15:42 SkyScan query 03:15:42 SkyScan query done: ret=0 az=90.015<-6001 ze=157.545<-1497 Statuses=0009 0009 03:15:42 Msec=0 True Az=90.015 Ze=157.545 Az status=0009 Ze status=0009 03:15:42 Check angles 03:15:42 SkyScan query 03:15:43 SkyScan query done: ret=0 az=72.645<-4843 ze=136.56<-2896 Statuses=0009 0009 03:15:43 Msec=750 True Az=72.645 Ze=136.56 Az status=0009 Ze status=0009 03:15:43 Check angles 03:15:43 SkyScan query 03:15:44 SkyScan query done: ret=0 az=54.81<-3654 ze=115.215<-4319 Statuses=0009 0009 03:15:44 Msec=1500 True Az=54.81 Ze=115.215 Az status=0009 Ze status=0009 03:15:44 Check angles 03:15:44 SkyScan query 03:15:44 SkyScan query done: ret=0 az=40.92<-2728 ze=93.795<-5747 Statuses=0009 0009 03:15:44 Msec=2250 True Az=40.92 Ze=93.795 Az status=0009 Ze status=0009 03:15:45 Check angles 03:15:45 SkyScan query 03:15:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 03:15:45 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 03:15:45 Check angles 03:15:45 SkyScan query 03:15:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 03:15:46 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 03:15:46 Check angles 03:15:46 SkyScan query 03:15:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:15:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:15:47 Message to Master queued w/err=0: serial=103051 error=0 03:15:52 Received message from Master: op=Filter serial=103052 03:15:52 Color wheel filter change from 0 to 0 03:15:52 FLIGetFilterPos err=0 currentPosition=0 03:15:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:52 Filter is already there-color wheel unchanged 03:15:52 Received message from Master: op=Shutter serial=103053 03:15:52 Shutter LASER close 03:15:52 Received message from Camera: op=State serial=103055 03:15:52 GetSingleValue result=40 Value=cccccccc 03:15:52 SkyScan query 03:15:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:53 Parameters OK 03:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:53 Set A/D data flow result=40 03:15:53 Set A/D channel type result=40 03:15:53 Set A/D encoding result=40 03:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:53 Set channel filter=0.000000e+000 result=40 03:15:53 Config A/D Result=40 03:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:53 Get A/D filter: -9.255963e+061 result=40 03:15:53 Get A/D value=-858993460 result=40 03:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:53 Parameters OK 03:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:53 Set A/D data flow result=40 03:15:53 Set A/D channel type result=40 03:15:53 Set A/D encoding result=40 03:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:53 Set channel filter=0.000000e+000 result=40 03:15:53 Config A/D Result=40 03:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:53 Get A/D filter: -9.255963e+061 result=40 03:15:53 Get A/D value=-858993460 result=40 03:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:53 Aux= 03:15:53 Message to Camera, serial 103055 queued [UTC 2018-12-13 03:15:53] 03:16:29 Received message from Master: op=PointingHead serial=103068 03:16:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:16:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:16:30 Point started: ret=0 03:16:30 point_skyscan result=0 03:16:31 Check angles 03:16:31 SkyScan query 03:16:31 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 03:16:31 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 03:16:31 Check angles 03:16:31 SkyScan query 03:16:32 SkyScan query done: ret=0 az=82.005<-5467 ze=66.495<-7567 Statuses=0009 0008 03:16:32 Msec=750 True Az=82.005 Ze=66.495 Az status=0009 Ze status=0008 03:16:32 Check angles 03:16:32 SkyScan query 03:16:33 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 03:16:33 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 03:16:33 Check angles 03:16:33 SkyScan query 03:16:33 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 03:16:33 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 03:16:34 Check angles 03:16:34 SkyScan query 03:16:34 SkyScan query done: ret=0 az=134.85<-8990 ze=66.495<-7567 Statuses=0009 0008 03:16:34 Msec=3000 True Az=134.85 Ze=66.495 Az status=0009 Ze status=0008 03:16:34 Check angles 03:16:34 SkyScan query 03:16:35 SkyScan query done: ret=0 az=152.34<-10156 ze=66.495<-7567 Statuses=0009 0008 03:16:35 Msec=3750 True Az=152.34 Ze=66.495 Az status=0009 Ze status=0008 03:16:35 Check angles 03:16:35 SkyScan query 03:16:36 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 03:16:36 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 03:16:36 Message to Master queued w/err=0: serial=103068 error=0 03:16:41 Received message from Master: op=Filter serial=103069 03:16:41 Color wheel filter change from 0 to 0 03:16:41 FLIGetFilterPos err=0 currentPosition=0 03:16:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:16:41 Filter is already there-color wheel unchanged 03:16:41 Received message from Master: op=Shutter serial=103070 03:16:41 Shutter LASER close 03:16:41 Received message from Camera: op=State serial=103072 03:16:41 GetSingleValue result=40 Value=cccccccc 03:16:41 SkyScan query 03:16:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:16:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:41 Parameters OK 03:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:41 Set A/D data flow result=40 03:16:41 Set A/D channel type result=40 03:16:41 Set A/D encoding result=40 03:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:41 Set channel filter=0.000000e+000 result=40 03:16:41 Config A/D Result=40 03:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:41 Get A/D filter: -9.255963e+061 result=40 03:16:41 Get A/D value=-858993460 result=40 03:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:41 Parameters OK 03:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:41 Set A/D data flow result=40 03:16:41 Set A/D channel type result=40 03:16:41 Set A/D encoding result=40 03:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:41 Set channel filter=0.000000e+000 result=40 03:16:41 Config A/D Result=40 03:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:41 Get A/D filter: -9.255963e+061 result=40 03:16:41 Get A/D value=-858993460 result=40 03:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:16:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:16:41 Aux= 03:16:41 Message to Camera, serial 103072 queued 03:17:18 Received message from Master: op=PointingHead serial=103085 03:17:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:17:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:17:19 Point started: ret=0 03:17:19 point_skyscan result=0 03:17:19 Check angles 03:17:19 SkyScan query 03:17:20 SkyScan query done: ret=0 az=134.82<-8988 ze=36.525<-9565 Statuses=0009 0009 03:17:20 Msec=0 True Az=134.82 Ze=36.525 Az status=0009 Ze status=0009 03:17:20 Check angles 03:17:20 SkyScan query 03:17:21 SkyScan query done: ret=0 az=117.33<-7822 ze=15.6<-10960 Statuses=0009 0009 03:17:21 Msec=750 True Az=117.33 Ze=15.6 Az status=0009 Ze status=0009 03:17:21 Check angles 03:17:21 SkyScan query 03:17:22 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.385<-12359 Statuses=0009 0009 03:17:22 Msec=1500 True Az=99.945 Ze=-5.385 Az status=0009 Ze status=0009 03:17:22 Check angles 03:17:22 SkyScan query 03:17:22 SkyScan query done: ret=0 az=82.32<-5488 ze=-26.325<-13755 Statuses=0009 0009 03:17:22 Msec=2250 True Az=82.32 Ze=-26.325 Az status=0009 Ze status=0009 03:17:22 Check angles 03:17:22 SkyScan query 03:17:23 SkyScan query done: ret=0 az=64.98<-4332 ze=-38.58<-14572 Statuses=0009 0008 03:17:23 Msec=3000 True Az=64.98 Ze=-38.58 Az status=0009 Ze status=0008 03:17:23 Check angles 03:17:23 SkyScan query 03:17:24 SkyScan query done: ret=0 az=47.52<-3168 ze=-38.52<-14568 Statuses=0009 0008 03:17:24 Msec=3750 True Az=47.52 Ze=-38.52 Az status=0009 Ze status=0008 03:17:24 Check angles 03:17:24 SkyScan query 03:17:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:17:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:17:25 Message to Master queued w/err=0: serial=103085 error=0 03:17:30 Received message from Master: op=Filter serial=103086 03:17:30 Color wheel filter change from 0 to 0 03:17:30 FLIGetFilterPos err=0 currentPosition=0 03:17:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:30 Filter is already there-color wheel unchanged 03:17:30 Received message from Master: op=Shutter serial=103087 03:17:30 Shutter LASER close 03:17:30 Received message from Camera: op=State serial=103089 03:17:30 GetSingleValue result=40 Value=cccccccc 03:17:30 SkyScan query 03:17:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:17:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:30 Parameters OK 03:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:30 Set A/D data flow result=40 03:17:30 Set A/D channel type result=40 03:17:30 Set A/D encoding result=40 03:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:30 Set channel filter=0.000000e+000 result=40 03:17:30 Config A/D Result=40 03:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:30 Get A/D filter: -9.255963e+061 result=40 03:17:30 Get A/D value=-858993460 result=40 03:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:30 Parameters OK 03:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:30 Set A/D data flow result=40 03:17:30 Set A/D channel type result=40 03:17:30 Set A/D encoding result=40 03:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:30 Set channel filter=0.000000e+000 result=40 03:17:30 Config A/D Result=40 03:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:30 Get A/D filter: -9.255963e+061 result=40 03:17:30 Get A/D value=-858993460 result=40 03:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:30 Aux= 03:17:30 Message to Camera, serial 103089 queued 03:18:07 Received message from Master: op=PointingHead serial=103102 03:18:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:18:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:18:08 Point started: ret=0 03:18:08 point_skyscan result=0 03:18:08 Check angles 03:18:08 SkyScan query 03:18:09 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.625<-16575 Statuses=0009 0009 03:18:09 Msec=0 True Az=64.245 Ze=-68.625 Az status=0009 Ze status=0009 03:18:09 Check angles 03:18:09 SkyScan query 03:18:10 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.61<-17974 Statuses=0009 0009 03:18:10 Msec=750 True Az=81.615 Ze=-89.61 Az status=0009 Ze status=0009 03:18:10 Check angles 03:18:10 SkyScan query 03:18:10 SkyScan query done: ret=0 az=99.75<-6650 ze=-110.985<-19399 Statuses=0009 0009 03:18:10 Msec=1500 True Az=99.75 Ze=-110.985 Az status=0009 Ze status=0009 03:18:11 Check angles 03:18:11 SkyScan query 03:18:11 SkyScan query done: ret=0 az=117.54<-7836 ze=-132.345<-20823 Statuses=0009 0009 03:18:11 Msec=2250 True Az=117.54 Ze=-132.345 Az status=0009 Ze status=0009 03:18:11 Check angles 03:18:11 SkyScan query 03:18:12 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 03:18:12 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 03:18:12 Check angles 03:18:12 SkyScan query 03:18:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:18:13 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:18:13 Message to Master queued w/err=0: serial=103102 error=0 03:18:18 Received message from Master: op=Filter serial=103103 03:18:18 Color wheel filter change from 0 to 0 03:18:18 FLIGetFilterPos err=0 currentPosition=0 03:18:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:18 Filter is already there-color wheel unchanged 03:18:18 Received message from Master: op=Shutter serial=103104 03:18:18 Shutter LASER close 03:18:18 Received message from Camera: op=State serial=103106 03:18:18 GetSingleValue result=40 Value=cccccccc 03:18:18 SkyScan query 03:18:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:18:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:18 Parameters OK 03:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:18 Set A/D data flow result=40 03:18:18 Set A/D channel type result=40 03:18:18 Set A/D encoding result=40 03:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:18 Set channel filter=0.000000e+000 result=40 03:18:18 Config A/D Result=40 03:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:18 Get A/D filter: -9.255963e+061 result=40 03:18:18 Get A/D value=-858993460 result=40 03:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:18 Parameters OK 03:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:18 Set A/D data flow result=40 03:18:18 Set A/D channel type result=40 03:18:18 Set A/D encoding result=40 03:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:18 Set channel filter=0.000000e+000 result=40 03:18:18 Config A/D Result=40 03:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:18 Get A/D filter: -9.255963e+061 result=40 03:18:18 Get A/D value=-858993460 result=40 03:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:18 Aux= 03:18:18 Message to Camera, serial 103106 queued 03:18:55 Received message from Master: op=PointingHead serial=103119 03:18:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:18:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:18:56 Point started: ret=0 03:18:56 point_skyscan result=0 03:18:56 Check angles 03:18:56 SkyScan query 03:18:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 03:18:57 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 03:18:57 Check angles 03:18:57 SkyScan query 03:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:18:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:18:58 Message to Master queued w/err=0: serial=103119 error=0 03:19:03 Received message from Master: op=Filter serial=103120 03:19:03 Color wheel filter change from 0 to 0 03:19:03 FLIGetFilterPos err=0 currentPosition=0 03:19:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:03 Filter is already there-color wheel unchanged 03:19:03 Received message from Master: op=Shutter serial=103121 03:19:03 Shutter LASER open 03:19:03 Received message from Camera: op=State serial=103123 03:19:03 GetSingleValue result=40 Value=cccccccc 03:19:03 SkyScan query 03:19:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:19:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:04 Parameters OK 03:19:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:04 Set A/D data flow result=40 03:19:04 Set A/D channel type result=40 03:19:04 Set A/D encoding result=40 03:19:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:04 Set channel filter=0.000000e+000 result=40 03:19:04 Config A/D Result=40 03:19:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:04 Get A/D filter: -9.255963e+061 result=40 03:19:04 Get A/D value=-858993460 result=40 03:19:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:04 Parameters OK 03:19:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:04 Set A/D data flow result=40 03:19:04 Set A/D channel type result=40 03:19:04 Set A/D encoding result=40 03:19:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:04 Set channel filter=0.000000e+000 result=40 03:19:04 Config A/D Result=40 03:19:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:04 Get A/D filter: -9.255963e+061 result=40 03:19:04 Get A/D value=-858993460 result=40 03:19:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:04 Aux= 03:19:04 Message to Camera, serial 103123 queued 03:19:12 Received message from Master: op=Shutter serial=103133 03:19:12 Shutter LASER close 03:19:13 Received message from Master: op=PointingHead serial=103137 03:19:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:19:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:19:13 Point started: ret=0 03:19:13 point_skyscan result=0 03:19:14 Check angles 03:19:14 SkyScan query 03:19:14 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.89<-21526 Statuses=0009 0009 03:19:14 Msec=0 True Az=136.17 Ze=-142.89 Az status=0009 Ze status=0009 03:19:15 Check angles 03:19:15 SkyScan query 03:19:15 SkyScan query done: ret=0 az=153.645<-10243 ze=-121.905<-20127 Statuses=0009 0009 03:19:15 Msec=750 True Az=153.645 Ze=-121.905 Az status=0009 Ze status=0009 03:19:15 Check angles 03:19:15 SkyScan query 03:19:16 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.38<-18692 Statuses=0009 0009 03:19:16 Msec=1500 True Az=171.57 Ze=-100.38 Az status=0009 Ze status=0009 03:19:16 Check angles 03:19:16 SkyScan query 03:19:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.62<-17308 Statuses=0008 0009 03:19:17 Msec=2250 True Az=176.01 Ze=-79.62 Az status=0008 Ze status=0009 03:19:17 Check angles 03:19:17 SkyScan query 03:19:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 03:19:17 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 03:19:18 Check angles 03:19:18 SkyScan query 03:19:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:19:18 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:19:18 Message to Master queued w/err=0: serial=103137 error=0 03:19:23 Received message from Master: op=Filter serial=103138 03:19:23 Color wheel filter change from 0 to 0 03:19:23 FLIGetFilterPos err=0 currentPosition=0 03:19:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:23 Filter is already there-color wheel unchanged 03:19:23 Received message from Master: op=Shutter serial=103139 03:19:23 Shutter LASER close 03:19:24 Received message from Camera: op=State serial=103141 03:19:24 GetSingleValue result=40 Value=cccccccc 03:19:24 SkyScan query 03:19:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:19:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:24 Parameters OK 03:19:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:24 Set A/D data flow result=40 03:19:24 Set A/D channel type result=40 03:19:24 Set A/D encoding result=40 03:19:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:24 Set channel filter=0.000000e+000 result=40 03:19:24 Config A/D Result=40 03:19:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:24 Get A/D filter: -9.255963e+061 result=40 03:19:24 Get A/D value=-858993460 result=40 03:19:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:24 Parameters OK 03:19:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:24 Set A/D data flow result=40 03:19:24 Set A/D channel type result=40 03:19:24 Set A/D encoding result=40 03:19:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:24 Set channel filter=0.000000e+000 result=40 03:19:24 Config A/D Result=40 03:19:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:24 Get A/D filter: -9.255963e+061 result=40 03:19:24 Get A/D value=-858993460 result=40 03:19:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:24 Aux= 03:19:24 Message to Camera, serial 103141 queued 03:20:01 Received message from Master: op=PointingHead serial=103154 03:20:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:20:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:20:01 Point started: ret=0 03:20:01 point_skyscan result=0 03:20:02 Check angles 03:20:02 SkyScan query 03:20:03 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.63<-13442 Statuses=0009 0009 03:20:03 Msec=0 True Az=152.94 Ze=-21.63 Az status=0009 Ze status=0009 03:20:03 Check angles 03:20:03 SkyScan query 03:20:03 SkyScan query done: ret=0 az=135.465<-9031 ze=-0.645<-12043 Statuses=0009 0009 03:20:03 Msec=750 True Az=135.465 Ze=-0.645 Az status=0009 Ze status=0009 03:20:04 Check angles 03:20:04 SkyScan query 03:20:04 SkyScan query done: ret=0 az=117.825<-7855 ze=20.295<-10647 Statuses=0009 0009 03:20:04 Msec=1500 True Az=117.825 Ze=20.295 Az status=0009 Ze status=0009 03:20:04 Check angles 03:20:04 SkyScan query 03:20:05 SkyScan query done: ret=0 az=100.44<-6696 ze=41.28<-9248 Statuses=0009 0009 03:20:05 Msec=2250 True Az=100.44 Ze=41.28 Az status=0009 Ze status=0009 03:20:05 Check angles 03:20:05 SkyScan query 03:20:06 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:20:06 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:20:06 Check angles 03:20:06 SkyScan query 03:20:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:20:06 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:20:06 Message to Master queued w/err=0: serial=103154 error=0 03:20:11 Received message from Master: op=Filter serial=103155 03:20:11 Color wheel filter change from 0 to 0 03:20:11 FLIGetFilterPos err=0 currentPosition=0 03:20:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:11 Filter is already there-color wheel unchanged 03:20:12 Received message from Master: op=Shutter serial=103156 03:20:12 Shutter LASER close 03:20:12 Received message from Camera: op=State serial=103158 03:20:12 GetSingleValue result=40 Value=cccccccc 03:20:12 SkyScan query 03:20:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:20:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:12 Parameters OK 03:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:12 Set A/D data flow result=40 03:20:12 Set A/D channel type result=40 03:20:12 Set A/D encoding result=40 03:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:12 Set channel filter=0.000000e+000 result=40 03:20:12 Config A/D Result=40 03:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:12 Get A/D filter: -9.255963e+061 result=40 03:20:12 Get A/D value=-858993460 result=40 03:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:12 Parameters OK 03:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:12 Set A/D data flow result=40 03:20:12 Set A/D channel type result=40 03:20:12 Set A/D encoding result=40 03:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:12 Set channel filter=0.000000e+000 result=40 03:20:12 Config A/D Result=40 03:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:12 Get A/D filter: -9.255963e+061 result=40 03:20:12 Get A/D value=-858993460 result=40 03:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:12 Aux= 03:20:12 Message to Camera, serial 103158 queued 03:20:49 Received message from Master: op=PointingHead serial=103171 03:20:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:20:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:20:49 Point started: ret=0 03:20:49 point_skyscan result=0 03:20:50 Check angles 03:20:50 SkyScan query 03:20:51 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 03:20:51 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 03:20:51 Check angles 03:20:51 SkyScan query 03:20:51 SkyScan query done: ret=0 az=126.435<-8429 ze=38.49<-9434 Statuses=0009 0008 03:20:51 Msec=750 True Az=126.435 Ze=38.49 Az status=0009 Ze status=0008 03:20:52 Check angles 03:20:52 SkyScan query 03:20:52 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 03:20:52 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 03:20:52 Check angles 03:20:52 SkyScan query 03:20:53 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 03:20:53 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 03:20:53 Check angles 03:20:53 SkyScan query 03:20:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 03:20:54 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 03:20:54 Check angles 03:20:54 SkyScan query 03:20:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:20:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:20:54 Message to Master queued w/err=0: serial=103171 error=0 03:20:59 Received message from Master: op=Filter serial=103172 03:20:59 Color wheel filter change from 0 to 0 03:20:59 FLIGetFilterPos err=0 currentPosition=0 03:20:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:59 Filter is already there-color wheel unchanged 03:21:00 Received message from Master: op=Shutter serial=103173 03:21:00 Shutter LASER close 03:21:00 Received message from Camera: op=State serial=103175 03:21:00 GetSingleValue result=40 Value=cccccccc 03:21:00 SkyScan query 03:21:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:21:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:00 Parameters OK 03:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:00 Set A/D data flow result=40 03:21:00 Set A/D channel type result=40 03:21:00 Set A/D encoding result=40 03:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:00 Set channel filter=0.000000e+000 result=40 03:21:00 Config A/D Result=40 03:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:00 Get A/D filter: -9.255963e+061 result=40 03:21:00 Get A/D value=-858993460 result=40 03:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:00 Parameters OK 03:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:00 Set A/D data flow result=40 03:21:00 Set A/D channel type result=40 03:21:00 Set A/D encoding result=40 03:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:00 Set channel filter=0.000000e+000 result=40 03:21:00 Config A/D Result=40 03:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:00 Get A/D filter: -9.255963e+061 result=40 03:21:00 Get A/D value=-858993460 result=40 03:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:00 Aux= 03:21:00 Message to Camera, serial 103175 queued 03:21:37 Received message from Master: op=PointingHead serial=103188 03:21:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:21:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:21:37 Point started: ret=0 03:21:37 point_skyscan result=0 03:21:38 Check angles 03:21:38 SkyScan query 03:21:39 SkyScan query done: ret=0 az=152.775<-10185 ze=8.445<-11437 Statuses=0009 0009 03:21:39 Msec=0 True Az=152.775 Ze=8.445 Az status=0009 Ze status=0009 03:21:39 Check angles 03:21:39 SkyScan query 03:21:39 SkyScan query done: ret=0 az=134.955<-8997 ze=-12.915<-12861 Statuses=0009 0009 03:21:39 Msec=750 True Az=134.955 Ze=-12.915 Az status=0009 Ze status=0009 03:21:40 Check angles 03:21:40 SkyScan query 03:21:40 SkyScan query done: ret=0 az=117.48<-7832 ze=-33.915<-14261 Statuses=0009 0009 03:21:40 Msec=1500 True Az=117.48 Ze=-33.915 Az status=0009 Ze status=0009 03:21:40 Check angles 03:21:40 SkyScan query 03:21:41 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.555<-15437 Statuses=0009 0009 03:21:41 Msec=2250 True Az=100.065 Ze=-51.555 Az status=0009 Ze status=0009 03:21:41 Check angles 03:21:41 SkyScan query 03:21:42 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:21:42 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:21:42 Check angles 03:21:42 SkyScan query 03:21:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:21:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:21:43 Message to Master queued w/err=0: serial=103188 error=0 03:21:48 Received message from Master: op=Filter serial=103189 03:21:48 Color wheel filter change from 0 to 0 03:21:48 FLIGetFilterPos err=0 currentPosition=0 03:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:48 Filter is already there-color wheel unchanged 03:21:48 Received message from Master: op=Shutter serial=103190 03:21:48 Shutter LASER close 03:21:48 Received message from Camera: op=State serial=103192 03:21:48 GetSingleValue result=40 Value=cccccccc 03:21:48 SkyScan query 03:21:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:21:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:48 Parameters OK 03:21:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:48 Set A/D data flow result=40 03:21:48 Set A/D channel type result=40 03:21:48 Set A/D encoding result=40 03:21:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:48 Set channel filter=0.000000e+000 result=40 03:21:48 Config A/D Result=40 03:21:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:48 Get A/D filter: -9.255963e+061 result=40 03:21:48 Get A/D value=-858993460 result=40 03:21:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:48 Parameters OK 03:21:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:48 Set A/D data flow result=40 03:21:48 Set A/D channel type result=40 03:21:48 Set A/D encoding result=40 03:21:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:48 Set channel filter=0.000000e+000 result=40 03:21:48 Config A/D Result=40 03:21:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:48 Get A/D filter: -9.255963e+061 result=40 03:21:48 Get A/D value=-858993460 result=40 03:21:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:48 Aux= 03:21:48 Message to Camera, serial 103192 queued 03:22:24 Received message from Master: op=PointingHead serial=103204 03:22:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:22:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:22:25 Point started: ret=0 03:22:25 point_skyscan result=0 03:22:25 Check angles 03:22:25 SkyScan query 03:22:26 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.585<-17439 Statuses=0009 0009 03:22:26 Msec=0 True Az=109.335 Ze=-81.585 Az status=0009 Ze status=0009 03:22:26 Check angles 03:22:26 SkyScan query 03:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 03:22:27 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 03:22:27 Check angles 03:22:27 SkyScan query 03:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 03:22:27 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 03:22:28 Check angles 03:22:28 SkyScan query 03:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.87<-21658 Statuses=0008 0009 03:22:28 Msec=2250 True Az=112.995 Ze=-144.87 Az status=0008 Ze status=0009 03:22:28 Check angles 03:22:28 SkyScan query 03:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 03:22:29 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 03:22:29 Check angles 03:22:29 SkyScan query 03:22:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:22:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:22:30 Message to Master queued w/err=0: serial=103204 error=0 03:22:35 Received message from Master: op=Filter serial=103205 03:22:35 Color wheel filter change from 0 to 0 03:22:35 FLIGetFilterPos err=0 currentPosition=0 03:22:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:35 Filter is already there-color wheel unchanged 03:22:35 Received message from Master: op=Shutter serial=103206 03:22:35 Shutter LASER open 03:22:35 Received message from Camera: op=State serial=103208 03:22:35 GetSingleValue result=40 Value=cccccccc 03:22:35 SkyScan query 03:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:22:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:36 Parameters OK 03:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:36 Set A/D data flow result=40 03:22:36 Set A/D channel type result=40 03:22:36 Set A/D encoding result=40 03:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:36 Set channel filter=0.000000e+000 result=40 03:22:36 Config A/D Result=40 03:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:36 Get A/D filter: -9.255963e+061 result=40 03:22:36 Get A/D value=-858993460 result=40 03:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:36 Parameters OK 03:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:36 Set A/D data flow result=40 03:22:36 Set A/D channel type result=40 03:22:36 Set A/D encoding result=40 03:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:36 Set channel filter=0.000000e+000 result=40 03:22:36 Config A/D Result=40 03:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:36 Get A/D filter: -9.255963e+061 result=40 03:22:36 Get A/D value=-858993460 result=40 03:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:36 Aux= 03:22:36 Message to Camera, serial 103208 queued 03:22:44 Received message from Master: op=Shutter serial=103218 03:22:44 Shutter LASER close 03:22:44 Received message from Master: op=PointingHead serial=103222 03:22:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:22:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:22:45 Point started: ret=0 03:22:45 point_skyscan result=0 03:22:46 Check angles 03:22:46 SkyScan query 03:22:46 SkyScan query done: ret=0 az=90.12<-6008 ze=157.515<-1499 Statuses=0009 0009 03:22:46 Msec=0 True Az=90.12 Ze=157.515 Az status=0009 Ze status=0009 03:22:46 Check angles 03:22:46 SkyScan query 03:22:47 SkyScan query done: ret=0 az=72.255<-4817 ze=136.005<-2933 Statuses=0009 0009 03:22:47 Msec=750 True Az=72.255 Ze=136.005 Az status=0009 Ze status=0009 03:22:47 Check angles 03:22:47 SkyScan query 03:22:48 SkyScan query done: ret=0 az=54.825<-3655 ze=115.185<-4321 Statuses=0009 0009 03:22:48 Msec=1500 True Az=54.825 Ze=115.185 Az status=0009 Ze status=0009 03:22:48 Check angles 03:22:48 SkyScan query 03:22:48 SkyScan query done: ret=0 az=40.875<-2725 ze=94.2<-5720 Statuses=0009 0009 03:22:48 Msec=2250 True Az=40.875 Ze=94.2 Az status=0009 Ze status=0009 03:22:49 Check angles 03:22:49 SkyScan query 03:22:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 03:22:49 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 03:22:49 Check angles 03:22:49 SkyScan query 03:22:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 03:22:50 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 03:22:50 Check angles 03:22:50 SkyScan query 03:22:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:22:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:22:51 Message to Master queued w/err=0: serial=103222 error=0 03:22:56 Received message from Master: op=Filter serial=103223 03:22:56 Color wheel filter change from 0 to 0 03:22:56 FLIGetFilterPos err=0 currentPosition=0 03:22:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:56 Filter is already there-color wheel unchanged 03:22:56 Received message from Master: op=Shutter serial=103224 03:22:56 Shutter LASER close 03:22:56 Received message from Camera: op=State serial=103226 03:22:56 GetSingleValue result=40 Value=cccccccc 03:22:56 SkyScan query 03:22:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:22:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:57 Parameters OK 03:22:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:57 Set A/D data flow result=40 03:22:57 Set A/D channel type result=40 03:22:57 Set A/D encoding result=40 03:22:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:57 Set channel filter=0.000000e+000 result=40 03:22:57 Config A/D Result=40 03:22:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:57 Get A/D filter: -9.255963e+061 result=40 03:22:57 Get A/D value=-858993460 result=40 03:22:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:57 Parameters OK 03:22:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:57 Set A/D data flow result=40 03:22:57 Set A/D channel type result=40 03:22:57 Set A/D encoding result=40 03:22:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:57 Set channel filter=0.000000e+000 result=40 03:22:57 Config A/D Result=40 03:22:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:57 Get A/D filter: -9.255963e+061 result=40 03:22:57 Get A/D value=-858993460 result=40 03:22:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:57 Aux= 03:22:57 Message to Camera, serial 103226 queued 03:23:33 Received message from Master: op=PointingHead serial=103239 03:23:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:23:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:23:34 Point started: ret=0 03:23:34 point_skyscan result=0 03:23:35 Check angles 03:23:35 SkyScan query 03:23:35 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 03:23:35 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 03:23:35 Check angles 03:23:35 SkyScan query 03:23:36 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 03:23:36 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 03:23:36 Check angles 03:23:36 SkyScan query 03:23:37 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 03:23:37 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 03:23:37 Check angles 03:23:37 SkyScan query 03:23:37 SkyScan query done: ret=0 az=117.435<-7829 ze=66.495<-7567 Statuses=0009 0008 03:23:37 Msec=2250 True Az=117.435 Ze=66.495 Az status=0009 Ze status=0008 03:23:38 Check angles 03:23:38 SkyScan query 03:23:38 SkyScan query done: ret=0 az=135.165<-9011 ze=66.495<-7567 Statuses=0009 0008 03:23:38 Msec=3000 True Az=135.165 Ze=66.495 Az status=0009 Ze status=0008 03:23:38 Check angles 03:23:38 SkyScan query 03:23:39 SkyScan query done: ret=0 az=152.715<-10181 ze=66.495<-7567 Statuses=0009 0008 03:23:39 Msec=3750 True Az=152.715 Ze=66.495 Az status=0009 Ze status=0008 03:23:39 Check angles 03:23:39 SkyScan query 03:23:40 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 03:23:40 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 03:23:40 Message to Master queued w/err=0: serial=103239 error=0 03:23:45 Received message from Master: op=Filter serial=103240 03:23:45 Color wheel filter change from 0 to 0 03:23:45 FLIGetFilterPos err=0 currentPosition=0 03:23:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:45 Filter is already there-color wheel unchanged 03:23:45 Received message from Master: op=Shutter serial=103241 03:23:45 Shutter LASER close 03:23:45 Received message from Camera: op=State serial=103243 03:23:45 GetSingleValue result=40 Value=cccccccc 03:23:45 SkyScan query 03:23:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:23:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:45 Parameters OK 03:23:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:45 Set A/D data flow result=40 03:23:45 Set A/D channel type result=40 03:23:45 Set A/D encoding result=40 03:23:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:45 Set channel filter=0.000000e+000 result=40 03:23:45 Config A/D Result=40 03:23:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:45 Get A/D filter: -9.255963e+061 result=40 03:23:45 Get A/D value=-858993460 result=40 03:23:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:45 Parameters OK 03:23:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:45 Set A/D data flow result=40 03:23:45 Set A/D channel type result=40 03:23:45 Set A/D encoding result=40 03:23:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:45 Set channel filter=0.000000e+000 result=40 03:23:45 Config A/D Result=40 03:23:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:45 Get A/D filter: -9.255963e+061 result=40 03:23:45 Get A/D value=-858993460 result=40 03:23:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:45 Aux= 03:23:45 Message to Camera, serial 103243 queued 03:24:22 Received message from Master: op=PointingHead serial=103256 03:24:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:24:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:24:23 Point started: ret=0 03:24:23 point_skyscan result=0 03:24:23 Check angles 03:24:23 SkyScan query 03:24:24 SkyScan query done: ret=0 az=135.135<-9009 ze=36.795<-9547 Statuses=0009 0009 03:24:24 Msec=0 True Az=135.135 Ze=36.795 Az status=0009 Ze status=0009 03:24:24 Check angles 03:24:24 SkyScan query 03:24:25 SkyScan query done: ret=0 az=117.66<-7844 ze=15.885<-10941 Statuses=0009 0009 03:24:25 Msec=750 True Az=117.66 Ze=15.885 Az status=0009 Ze status=0009 03:24:25 Check angles 03:24:25 SkyScan query 03:24:25 SkyScan query done: ret=0 az=100.26<-6684 ze=-5.07<-12338 Statuses=0009 0009 03:24:25 Msec=1500 True Az=100.26 Ze=-5.07 Az status=0009 Ze status=0009 03:24:26 Check angles 03:24:26 SkyScan query 03:24:26 SkyScan query done: ret=0 az=82.77<-5518 ze=-26.025<-13735 Statuses=0009 0009 03:24:26 Msec=2250 True Az=82.77 Ze=-26.025 Az status=0009 Ze status=0009 03:24:26 Check angles 03:24:26 SkyScan query 03:24:27 SkyScan query done: ret=0 az=65.295<-4353 ze=-38.565<-14571 Statuses=0009 0008 03:24:27 Msec=3000 True Az=65.295 Ze=-38.565 Az status=0009 Ze status=0008 03:24:27 Check angles 03:24:27 SkyScan query 03:24:28 SkyScan query done: ret=0 az=47.805<-3187 ze=-38.535<-14569 Statuses=0009 0008 03:24:28 Msec=3750 True Az=47.805 Ze=-38.535 Az status=0009 Ze status=0008 03:24:28 Check angles 03:24:28 SkyScan query 03:24:28 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 03:24:28 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 03:24:28 Message to Master queued w/err=0: serial=103256 error=0 03:24:33 Received message from Master: op=Filter serial=103257 03:24:33 Color wheel filter change from 0 to 0 03:24:33 FLIGetFilterPos err=0 currentPosition=0 03:24:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:33 Filter is already there-color wheel unchanged 03:24:34 Received message from Master: op=Shutter serial=103258 03:24:34 Shutter LASER close 03:24:34 Received message from Camera: op=State serial=103260 03:24:34 GetSingleValue result=40 Value=cccccccc 03:24:34 SkyScan query 03:24:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:24:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:34 Parameters OK 03:24:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:34 Set A/D data flow result=40 03:24:34 Set A/D channel type result=40 03:24:34 Set A/D encoding result=40 03:24:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:34 Set channel filter=0.000000e+000 result=40 03:24:34 Config A/D Result=40 03:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:34 Get A/D filter: -9.255963e+061 result=40 03:24:34 Get A/D value=-858993460 result=40 03:24:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:34 Parameters OK 03:24:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:34 Set A/D data flow result=40 03:24:34 Set A/D channel type result=40 03:24:34 Set A/D encoding result=40 03:24:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:34 Set channel filter=0.000000e+000 result=40 03:24:34 Config A/D Result=40 03:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:34 Get A/D filter: -9.255963e+061 result=40 03:24:34 Get A/D value=-858993460 result=40 03:24:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:34 Aux= 03:24:34 Message to Camera, serial 103260 queued 03:25:11 Received message from Master: op=PointingHead serial=103273 03:25:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:25:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:25:11 Point started: ret=0 03:25:11 point_skyscan result=0 03:25:12 Check angles 03:25:12 SkyScan query 03:25:13 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.145<-16543 Statuses=0009 0009 03:25:13 Msec=0 True Az=63.855 Ze=-68.145 Az status=0009 Ze status=0009 03:25:13 Check angles 03:25:13 SkyScan query 03:25:13 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.145<-17943 Statuses=0009 0009 03:25:13 Msec=750 True Az=81.3 Ze=-89.145 Az status=0009 Ze status=0009 03:25:14 Check angles 03:25:14 SkyScan query 03:25:14 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.535<-19369 Statuses=0009 0009 03:25:14 Msec=1500 True Az=99.21 Ze=-110.535 Az status=0009 Ze status=0009 03:25:14 Check angles 03:25:14 SkyScan query 03:25:15 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.49<-20766 Statuses=0009 0009 03:25:15 Msec=2250 True Az=116.76 Ze=-131.49 Az status=0009 Ze status=0009 03:25:15 Check angles 03:25:15 SkyScan query 03:25:16 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 03:25:16 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 03:25:16 Check angles 03:25:16 SkyScan query 03:25:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:25:16 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:25:16 Message to Master queued w/err=0: serial=103273 error=0 03:25:21 Received message from Master: op=Filter serial=103274 03:25:21 Color wheel filter change from 0 to 0 03:25:21 FLIGetFilterPos err=0 currentPosition=0 03:25:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:21 Filter is already there-color wheel unchanged 03:25:22 Received message from Master: op=Shutter serial=103275 03:25:22 Shutter LASER close 03:25:22 Received message from Camera: op=State serial=103277 03:25:22 GetSingleValue result=40 Value=cccccccc 03:25:22 SkyScan query 03:25:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:25:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:22 Parameters OK 03:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:22 Set A/D data flow result=40 03:25:22 Set A/D channel type result=40 03:25:22 Set A/D encoding result=40 03:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:22 Set channel filter=0.000000e+000 result=40 03:25:22 Config A/D Result=40 03:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:22 Get A/D filter: -9.255963e+061 result=40 03:25:22 Get A/D value=-858993460 result=40 03:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:22 Parameters OK 03:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:22 Set A/D data flow result=40 03:25:22 Set A/D channel type result=40 03:25:22 Set A/D encoding result=40 03:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:22 Set channel filter=0.000000e+000 result=40 03:25:22 Config A/D Result=40 03:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:22 Get A/D filter: -9.255963e+061 result=40 03:25:22 Get A/D value=-858993460 result=40 03:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:22 Aux= 03:25:22 Message to Camera, serial 103277 queued 03:25:59 Received message from Master: op=PointingHead serial=103290 03:25:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:25:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:25:59 Point started: ret=0 03:25:59 point_skyscan result=0 03:26:00 Check angles 03:26:00 SkyScan query 03:26:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 03:26:01 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 03:26:01 Check angles 03:26:01 SkyScan query 03:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:26:02 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:26:02 Message to Master queued w/err=0: serial=103290 error=0 03:26:07 Received message from Master: op=Filter serial=103291 03:26:07 Color wheel filter change from 0 to 0 03:26:07 FLIGetFilterPos err=0 currentPosition=0 03:26:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:07 Filter is already there-color wheel unchanged 03:26:07 Received message from Master: op=Shutter serial=103292 03:26:07 Shutter LASER open 03:26:07 Received message from Camera: op=State serial=103294 03:26:07 GetSingleValue result=40 Value=cccccccc 03:26:07 SkyScan query 03:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:26:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:07 Parameters OK 03:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:07 Set A/D data flow result=40 03:26:07 Set A/D channel type result=40 03:26:07 Set A/D encoding result=40 03:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:07 Set channel filter=0.000000e+000 result=40 03:26:07 Config A/D Result=40 03:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:07 Get A/D filter: -9.255963e+061 result=40 03:26:07 Get A/D value=-858993460 result=40 03:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:07 Parameters OK 03:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:07 Set A/D data flow result=40 03:26:07 Set A/D channel type result=40 03:26:07 Set A/D encoding result=40 03:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:07 Set channel filter=0.000000e+000 result=40 03:26:07 Config A/D Result=40 03:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:07 Get A/D filter: -9.255963e+061 result=40 03:26:07 Get A/D value=-858993460 result=40 03:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:07 Aux= 03:26:07 Message to Camera, serial 103294 queued 03:26:16 Received message from Master: op=Shutter serial=103304 03:26:16 Shutter LASER close 03:26:17 Received message from Master: op=PointingHead serial=103308 03:26:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:26:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:26:17 Point started: ret=0 03:26:17 point_skyscan result=0 03:26:18 Check angles 03:26:18 SkyScan query 03:26:18 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.385<-21559 Statuses=0009 0009 03:26:18 Msec=0 True Az=135.825 Ze=-143.385 Az status=0009 Ze status=0009 03:26:18 Check angles 03:26:18 SkyScan query [UTC 2018-12-13 03:26:19] 03:26:19 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.935<-20129 Statuses=0009 0009 03:26:19 Msec=750 True Az=153.765 Ze=-121.935 Az status=0009 Ze status=0009 03:26:19 Check angles 03:26:19 SkyScan query 03:26:20 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.545<-18703 Statuses=0009 0009 03:26:20 Msec=1500 True Az=171.63 Ze=-100.545 Az status=0009 Ze status=0009 03:26:20 Check angles 03:26:20 SkyScan query 03:26:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.635<-17309 Statuses=0008 0009 03:26:21 Msec=2250 True Az=176.01 Ze=-79.635 Az status=0008 Ze status=0009 03:26:21 Check angles 03:26:21 SkyScan query 03:26:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 03:26:21 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 03:26:21 Check angles 03:26:21 SkyScan query 03:26:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 03:26:22 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 03:26:22 Message to Master queued w/err=0: serial=103308 error=0 03:26:27 Received message from Master: op=Filter serial=103309 03:26:27 Color wheel filter change from 0 to 0 03:26:27 FLIGetFilterPos err=0 currentPosition=0 03:26:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:27 Filter is already there-color wheel unchanged 03:26:27 Received message from Master: op=Shutter serial=103310 03:26:27 Shutter LASER close 03:26:27 Received message from Camera: op=State serial=103312 03:26:27 GetSingleValue result=40 Value=cccccccc 03:26:27 SkyScan query 03:26:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:26:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:28 Parameters OK 03:26:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:28 Set A/D data flow result=40 03:26:28 Set A/D channel type result=40 03:26:28 Set A/D encoding result=40 03:26:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:28 Set channel filter=0.000000e+000 result=40 03:26:28 Config A/D Result=40 03:26:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:28 Get A/D filter: -9.255963e+061 result=40 03:26:28 Get A/D value=-858993460 result=40 03:26:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:28 Parameters OK 03:26:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:28 Set A/D data flow result=40 03:26:28 Set A/D channel type result=40 03:26:28 Set A/D encoding result=40 03:26:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:28 Set channel filter=0.000000e+000 result=40 03:26:28 Config A/D Result=40 03:26:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:28 Get A/D filter: -9.255963e+061 result=40 03:26:28 Get A/D value=-858993460 result=40 03:26:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:28 Aux= 03:26:28 Message to Camera, serial 103312 queued 03:27:05 Received message from Master: op=PointingHead serial=103325 03:27:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:27:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:27:05 Point started: ret=0 03:27:05 point_skyscan result=0 03:27:06 Check angles 03:27:06 SkyScan query 03:27:06 SkyScan query done: ret=0 az=153.21<-10214 ze=-21.99<-13466 Statuses=0009 0009 03:27:06 Msec=0 True Az=153.21 Ze=-21.99 Az status=0009 Ze status=0009 03:27:07 Check angles 03:27:07 SkyScan query 03:27:07 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.005<-12067 Statuses=0009 0009 03:27:07 Msec=750 True Az=135.78 Ze=-1.005 Az status=0009 Ze status=0009 03:27:07 Check angles 03:27:07 SkyScan query 03:27:08 SkyScan query done: ret=0 az=118.245<-7883 ze=20.01<-10666 Statuses=0009 0009 03:27:08 Msec=1500 True Az=118.245 Ze=20.01 Az status=0009 Ze status=0009 03:27:08 Check angles 03:27:08 SkyScan query 03:27:09 SkyScan query done: ret=0 az=100.845<-6723 ze=40.92<-9272 Statuses=0009 0009 03:27:09 Msec=2250 True Az=100.845 Ze=40.92 Az status=0009 Ze status=0009 03:27:09 Check angles 03:27:09 SkyScan query 03:27:09 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:27:09 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:27:10 Check angles 03:27:10 SkyScan query 03:27:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:27:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:27:10 Message to Master queued w/err=0: serial=103325 error=0 03:27:15 Received message from Master: op=Filter serial=103326 03:27:15 Color wheel filter change from 0 to 0 03:27:15 FLIGetFilterPos err=0 currentPosition=0 03:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:15 Filter is already there-color wheel unchanged 03:27:15 Received message from Master: op=Shutter serial=103327 03:27:15 Shutter LASER close 03:27:15 Received message from Camera: op=State serial=103329 03:27:15 GetSingleValue result=40 Value=cccccccc 03:27:15 SkyScan query 03:27:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:16 Parameters OK 03:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:16 Set A/D data flow result=40 03:27:16 Set A/D channel type result=40 03:27:16 Set A/D encoding result=40 03:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:16 Set channel filter=0.000000e+000 result=40 03:27:16 Config A/D Result=40 03:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:16 Get A/D filter: -9.255963e+061 result=40 03:27:16 Get A/D value=-858993460 result=40 03:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:16 Parameters OK 03:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:16 Set A/D data flow result=40 03:27:16 Set A/D channel type result=40 03:27:16 Set A/D encoding result=40 03:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:16 Set channel filter=0.000000e+000 result=40 03:27:16 Config A/D Result=40 03:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:16 Get A/D filter: -9.255963e+061 result=40 03:27:16 Get A/D value=-858993460 result=40 03:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:16 Aux= 03:27:16 Message to Camera, serial 103329 queued 03:27:53 Received message from Master: op=PointingHead serial=103342 03:27:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:27:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:27:53 Point started: ret=0 03:27:53 point_skyscan result=0 03:27:54 Check angles 03:27:54 SkyScan query 03:27:54 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 03:27:54 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 03:27:55 Check angles 03:27:55 SkyScan query 03:27:55 SkyScan query done: ret=0 az=126.285<-8419 ze=38.505<-9433 Statuses=0009 0008 03:27:55 Msec=750 True Az=126.285 Ze=38.505 Az status=0009 Ze status=0008 03:27:55 Check angles 03:27:55 SkyScan query 03:27:56 SkyScan query done: ret=0 az=143.76<-9584 ze=38.505<-9433 Statuses=0009 0008 03:27:56 Msec=1500 True Az=143.76 Ze=38.505 Az status=0009 Ze status=0008 03:27:56 Check angles 03:27:56 SkyScan query 03:27:57 SkyScan query done: ret=0 az=161.055<-10737 ze=38.505<-9433 Statuses=0009 0008 03:27:57 Msec=2250 True Az=161.055 Ze=38.505 Az status=0009 Ze status=0008 03:27:57 Check angles 03:27:57 SkyScan query 03:27:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 03:27:57 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 03:27:58 Check angles 03:27:58 SkyScan query 03:27:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:27:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:27:58 Message to Master queued w/err=0: serial=103342 error=0 03:28:03 Received message from Master: op=Filter serial=103343 03:28:03 Color wheel filter change from 0 to 0 03:28:03 FLIGetFilterPos err=0 currentPosition=0 03:28:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:03 Filter is already there-color wheel unchanged 03:28:03 Received message from Master: op=Shutter serial=103344 03:28:03 Shutter LASER close 03:28:03 Received message from Camera: op=State serial=103346 03:28:03 GetSingleValue result=40 Value=cccccccc 03:28:03 SkyScan query 03:28:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:28:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:04 Parameters OK 03:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:04 Set A/D data flow result=40 03:28:04 Set A/D channel type result=40 03:28:04 Set A/D encoding result=40 03:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:04 Set channel filter=0.000000e+000 result=40 03:28:04 Config A/D Result=40 03:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:04 Get A/D filter: -9.255963e+061 result=40 03:28:04 Get A/D value=-858993460 result=40 03:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:04 Parameters OK 03:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:04 Set A/D data flow result=40 03:28:04 Set A/D channel type result=40 03:28:04 Set A/D encoding result=40 03:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:04 Set channel filter=0.000000e+000 result=40 03:28:04 Config A/D Result=40 03:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:04 Get A/D filter: -9.255963e+061 result=40 03:28:04 Get A/D value=-858993460 result=40 03:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:04 Aux= 03:28:04 Message to Camera, serial 103346 queued 03:28:41 Received message from Master: op=PointingHead serial=103359 03:28:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:28:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:28:41 Point started: ret=0 03:28:41 point_skyscan result=0 03:28:42 Check angles 03:28:42 SkyScan query 03:28:43 SkyScan query done: ret=0 az=153.12<-10208 ze=8.835<-11411 Statuses=0009 0009 03:28:43 Msec=0 True Az=153.12 Ze=8.835 Az status=0009 Ze status=0009 03:28:43 Check angles 03:28:43 SkyScan query 03:28:43 SkyScan query done: ret=0 az=135.69<-9046 ze=-12.12<-12808 Statuses=0009 0009 03:28:43 Msec=750 True Az=135.69 Ze=-12.12 Az status=0009 Ze status=0009 03:28:43 Check angles 03:28:43 SkyScan query 03:28:44 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.045<-14203 Statuses=0009 0009 03:28:44 Msec=1500 True Az=118.11 Ze=-33.045 Az status=0009 Ze status=0009 03:28:44 Check angles 03:28:44 SkyScan query 03:28:45 SkyScan query done: ret=0 az=100.695<-6713 ze=-51.525<-15435 Statuses=0009 0009 03:28:45 Msec=2250 True Az=100.695 Ze=-51.525 Az status=0009 Ze status=0009 03:28:45 Check angles 03:28:45 SkyScan query 03:28:46 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:28:46 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:28:46 Check angles 03:28:46 SkyScan query 03:28:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:28:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:28:46 Message to Master queued w/err=0: serial=103359 error=0 03:28:51 Received message from Master: op=Filter serial=103360 03:28:51 Color wheel filter change from 0 to 0 03:28:51 FLIGetFilterPos err=0 currentPosition=0 03:28:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:51 Filter is already there-color wheel unchanged 03:28:51 Received message from Master: op=Shutter serial=103361 03:28:51 Shutter LASER close 03:28:52 Received message from Camera: op=State serial=103363 03:28:52 GetSingleValue result=40 Value=cccccccc 03:28:52 SkyScan query 03:28:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:28:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:52 Parameters OK 03:28:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:52 Set A/D data flow result=40 03:28:52 Set A/D channel type result=40 03:28:52 Set A/D encoding result=40 03:28:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:52 Set channel filter=0.000000e+000 result=40 03:28:52 Config A/D Result=40 03:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:52 Get A/D filter: -9.255963e+061 result=40 03:28:52 Get A/D value=-858993460 result=40 03:28:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:52 Parameters OK 03:28:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:52 Set A/D data flow result=40 03:28:52 Set A/D channel type result=40 03:28:52 Set A/D encoding result=40 03:28:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:52 Set channel filter=0.000000e+000 result=40 03:28:52 Config A/D Result=40 03:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:52 Get A/D filter: -9.255963e+061 result=40 03:28:52 Get A/D value=-858993460 result=40 03:28:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:52 Aux= 03:28:52 Message to Camera, serial 103363 queued 03:29:29 Received message from Master: op=PointingHead serial=103376 03:29:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:29:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:29:29 Point started: ret=0 03:29:29 point_skyscan result=0 03:29:30 Check angles 03:29:30 SkyScan query 03:29:31 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.195<-17413 Statuses=0009 0009 03:29:31 Msec=0 True Az=108.93 Ze=-81.195 Az status=0009 Ze status=0009 03:29:31 Check angles 03:29:31 SkyScan query 03:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.585<-18839 Statuses=0008 0009 03:29:31 Msec=750 True Az=112.995 Ze=-102.585 Az status=0008 Ze status=0009 03:29:32 Check angles 03:29:32 SkyScan query 03:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 03:29:32 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 03:29:32 Check angles 03:29:32 SkyScan query 03:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 03:29:33 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 03:29:33 Check angles 03:29:33 SkyScan query 03:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.855<-23057 Statuses=0008 0009 03:29:34 Msec=3000 True Az=112.995 Ze=-165.855 Az status=0008 Ze status=0009 03:29:34 Check angles 03:29:34 SkyScan query 03:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:29:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:29:34 Message to Master queued w/err=0: serial=103376 error=0 03:29:39 Received message from Master: op=Filter serial=103377 03:29:39 Color wheel filter change from 0 to 0 03:29:39 FLIGetFilterPos err=0 currentPosition=0 03:29:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:39 Filter is already there-color wheel unchanged 03:29:40 Received message from Master: op=Shutter serial=103378 03:29:40 Shutter LASER open 03:29:40 Received message from Camera: op=State serial=103380 03:29:40 GetSingleValue result=40 Value=cccccccc 03:29:40 SkyScan query 03:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:29:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:40 Parameters OK 03:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:40 Set A/D data flow result=40 03:29:40 Set A/D channel type result=40 03:29:40 Set A/D encoding result=40 03:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:40 Set channel filter=0.000000e+000 result=40 03:29:40 Config A/D Result=40 03:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:40 Get A/D filter: -9.255963e+061 result=40 03:29:40 Get A/D value=-858993460 result=40 03:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:40 Parameters OK 03:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:40 Set A/D data flow result=40 03:29:40 Set A/D channel type result=40 03:29:40 Set A/D encoding result=40 03:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:40 Set channel filter=0.000000e+000 result=40 03:29:40 Config A/D Result=40 03:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:40 Get A/D filter: -9.255963e+061 result=40 03:29:40 Get A/D value=-858993460 result=40 03:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:40 Aux= 03:29:40 Message to Camera, serial 103380 queued 03:29:49 Received message from Master: op=Shutter serial=103390 03:29:49 Shutter LASER close 03:29:49 Received message from Master: op=PointingHead serial=103394 03:29:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:29:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:29:50 Point started: ret=0 03:29:50 point_skyscan result=0 03:29:50 Check angles 03:29:50 SkyScan query 03:29:51 SkyScan query done: ret=0 az=90.06<-6004 ze=157.35<-1510 Statuses=0009 0009 03:29:51 Msec=0 True Az=90.06 Ze=157.35 Az status=0009 Ze status=0009 03:29:51 Check angles 03:29:51 SkyScan query 03:29:52 SkyScan query done: ret=0 az=72.615<-4841 ze=136.365<-2909 Statuses=0009 0009 03:29:52 Msec=750 True Az=72.615 Ze=136.365 Az status=0009 Ze status=0009 03:29:52 Check angles 03:29:52 SkyScan query 03:29:52 SkyScan query done: ret=0 az=55.08<-3672 ze=115.455<-4303 Statuses=0009 0009 03:29:52 Msec=1500 True Az=55.08 Ze=115.455 Az status=0009 Ze status=0009 03:29:53 Check angles 03:29:53 SkyScan query 03:29:53 SkyScan query done: ret=0 az=40.875<-2725 ze=94.02<-5732 Statuses=0009 0009 03:29:53 Msec=2250 True Az=40.875 Ze=94.02 Az status=0009 Ze status=0009 03:29:53 Check angles 03:29:53 SkyScan query 03:29:54 SkyScan query done: ret=0 az=40.995<-2733 ze=73.05<-7130 Statuses=0008 0009 03:29:54 Msec=3000 True Az=40.995 Ze=73.05 Az status=0008 Ze status=0009 03:29:54 Check angles 03:29:54 SkyScan query 03:29:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 03:29:55 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 03:29:55 Check angles 03:29:55 SkyScan query 03:29:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:29:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:29:55 Message to Master queued w/err=0: serial=103394 error=0 03:30:00 Received message from Master: op=Filter serial=103395 03:30:00 Color wheel filter change from 0 to 0 03:30:00 FLIGetFilterPos err=0 currentPosition=0 03:30:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:00 Filter is already there-color wheel unchanged 03:30:01 Received message from Master: op=Shutter serial=103396 03:30:01 Shutter LASER close 03:30:01 Received message from Camera: op=State serial=103398 03:30:01 GetSingleValue result=40 Value=cccccccc 03:30:01 SkyScan query 03:30:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:30:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:01 Parameters OK 03:30:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:01 Set A/D data flow result=40 03:30:01 Set A/D channel type result=40 03:30:01 Set A/D encoding result=40 03:30:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:01 Set channel filter=0.000000e+000 result=40 03:30:01 Config A/D Result=40 03:30:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:01 Get A/D filter: -9.255963e+061 result=40 03:30:01 Get A/D value=-858993460 result=40 03:30:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:01 Parameters OK 03:30:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:01 Set A/D data flow result=40 03:30:01 Set A/D channel type result=40 03:30:01 Set A/D encoding result=40 03:30:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:01 Set channel filter=0.000000e+000 result=40 03:30:01 Config A/D Result=40 03:30:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:01 Get A/D filter: -9.255963e+061 result=40 03:30:01 Get A/D value=-858993460 result=40 03:30:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:01 Aux= 03:30:01 Message to Camera, serial 103398 queued 03:30:38 Received message from Master: op=PointingHead serial=103411 03:30:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:30:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:30:38 Point started: ret=0 03:30:38 point_skyscan result=0 03:30:39 Check angles 03:30:39 SkyScan query 03:30:40 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 03:30:40 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 03:30:40 Check angles 03:30:40 SkyScan query 03:30:41 SkyScan query done: ret=0 az=81.315<-5421 ze=66.51<-7566 Statuses=0009 0008 03:30:41 Msec=750 True Az=81.315 Ze=66.51 Az status=0009 Ze status=0008 03:30:41 Check angles 03:30:41 SkyScan query 03:30:41 SkyScan query done: ret=0 az=98.88<-6592 ze=66.495<-7567 Statuses=0009 0008 03:30:41 Msec=1500 True Az=98.88 Ze=66.495 Az status=0009 Ze status=0008 03:30:41 Check angles 03:30:41 SkyScan query 03:30:42 SkyScan query done: ret=0 az=116.475<-7765 ze=66.495<-7567 Statuses=0009 0008 03:30:42 Msec=2250 True Az=116.475 Ze=66.495 Az status=0009 Ze status=0008 03:30:42 Check angles 03:30:42 SkyScan query 03:30:43 SkyScan query done: ret=0 az=133.995<-8933 ze=66.495<-7567 Statuses=0009 0008 03:30:43 Msec=3000 True Az=133.995 Ze=66.495 Az status=0009 Ze status=0008 03:30:43 Check angles 03:30:43 SkyScan query 03:30:44 SkyScan query done: ret=0 az=151.365<-10091 ze=66.495<-7567 Statuses=0009 0008 03:30:44 Msec=3750 True Az=151.365 Ze=66.495 Az status=0009 Ze status=0008 03:30:44 Check angles 03:30:44 SkyScan query 03:30:44 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 03:30:44 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 03:30:44 Message to Master queued w/err=0: serial=103411 error=0 03:30:49 Received message from Master: op=Filter serial=103412 03:30:49 Color wheel filter change from 0 to 0 03:30:49 FLIGetFilterPos err=0 currentPosition=0 03:30:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:49 Filter is already there-color wheel unchanged 03:30:49 Received message from Master: op=Shutter serial=103413 03:30:49 Shutter LASER close 03:30:50 Received message from Camera: op=State serial=103415 03:30:50 GetSingleValue result=40 Value=cccccccc 03:30:50 SkyScan query 03:30:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:30:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:50 Parameters OK 03:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:50 Set A/D data flow result=40 03:30:50 Set A/D channel type result=40 03:30:50 Set A/D encoding result=40 03:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:50 Set channel filter=0.000000e+000 result=40 03:30:50 Config A/D Result=40 03:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:50 Get A/D filter: -9.255963e+061 result=40 03:30:50 Get A/D value=-858993460 result=40 03:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:50 Parameters OK 03:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:50 Set A/D data flow result=40 03:30:50 Set A/D channel type result=40 03:30:50 Set A/D encoding result=40 03:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:50 Set channel filter=0.000000e+000 result=40 03:30:50 Config A/D Result=40 03:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:50 Get A/D filter: -9.255963e+061 result=40 03:30:50 Get A/D value=-858993460 result=40 03:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:50 Aux= 03:30:50 Message to Camera, serial 103415 queued 03:31:27 Received message from Master: op=PointingHead serial=103428 03:31:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:31:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:31:27 Point started: ret=0 03:31:27 point_skyscan result=0 03:31:28 Check angles 03:31:28 SkyScan query 03:31:29 SkyScan query done: ret=0 az=134.55<-8970 ze=36.24<-9584 Statuses=0009 0009 03:31:29 Msec=0 True Az=134.55 Ze=36.24 Az status=0009 Ze status=0009 03:31:29 Check angles 03:31:29 SkyScan query 03:31:29 SkyScan query done: ret=0 az=116.7<-7780 ze=14.85<-11010 Statuses=0009 0009 03:31:29 Msec=750 True Az=116.7 Ze=14.85 Az status=0009 Ze status=0009 03:31:30 Check angles 03:31:30 SkyScan query 03:31:30 SkyScan query done: ret=0 az=99.36<-6624 ze=-6.12<-12408 Statuses=0009 0009 03:31:30 Msec=1500 True Az=99.36 Ze=-6.12 Az status=0009 Ze status=0009 03:31:30 Check angles 03:31:30 SkyScan query 03:31:31 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.075<-13805 Statuses=0009 0009 03:31:31 Msec=2250 True Az=81.81 Ze=-27.075 Az status=0009 Ze status=0009 03:31:31 Check angles 03:31:31 SkyScan query 03:31:32 SkyScan query done: ret=0 az=64.05<-4270 ze=-38.565<-14571 Statuses=0009 0008 03:31:32 Msec=3000 True Az=64.05 Ze=-38.565 Az status=0009 Ze status=0008 03:31:32 Check angles 03:31:32 SkyScan query 03:31:33 SkyScan query done: ret=0 az=46.245<-3083 ze=-38.535<-14569 Statuses=0009 0008 03:31:33 Msec=3750 True Az=46.245 Ze=-38.535 Az status=0009 Ze status=0008 03:31:33 Check angles 03:31:33 SkyScan query 03:31:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:31:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:31:33 Message to Master queued w/err=0: serial=103428 error=0 03:31:38 Received message from Master: op=Filter serial=103429 03:31:38 Color wheel filter change from 0 to 0 03:31:38 FLIGetFilterPos err=0 currentPosition=0 03:31:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:38 Filter is already there-color wheel unchanged 03:31:38 Received message from Master: op=Shutter serial=103430 03:31:38 Shutter LASER close 03:31:38 Received message from Camera: op=State serial=103432 03:31:38 GetSingleValue result=40 Value=cccccccc 03:31:38 SkyScan query 03:31:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:31:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:39 Parameters OK 03:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:39 Set A/D data flow result=40 03:31:39 Set A/D channel type result=40 03:31:39 Set A/D encoding result=40 03:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:39 Set channel filter=0.000000e+000 result=40 03:31:39 Config A/D Result=40 03:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:39 Get A/D filter: -9.255963e+061 result=40 03:31:39 Get A/D value=-858993460 result=40 03:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:39 Parameters OK 03:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:39 Set A/D data flow result=40 03:31:39 Set A/D channel type result=40 03:31:39 Set A/D encoding result=40 03:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:39 Set channel filter=0.000000e+000 result=40 03:31:39 Config A/D Result=40 03:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:39 Get A/D filter: -9.255963e+061 result=40 03:31:39 Get A/D value=-858993460 result=40 03:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:39 Aux= 03:31:39 Message to Camera, serial 103432 queued 03:32:16 Received message from Master: op=PointingHead serial=103445 03:32:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:32:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:32:16 Point started: ret=0 03:32:16 point_skyscan result=0 03:32:17 Check angles 03:32:17 SkyScan query 03:32:18 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.445<-16563 Statuses=0009 0009 03:32:18 Msec=0 True Az=64.2 Ze=-68.445 Az status=0009 Ze status=0009 03:32:18 Check angles 03:32:18 SkyScan query 03:32:18 SkyScan query done: ret=0 az=81.48<-5432 ze=-89.43<-17962 Statuses=0009 0009 03:32:18 Msec=750 True Az=81.48 Ze=-89.43 Az status=0009 Ze status=0009 03:32:19 Check angles 03:32:19 SkyScan query 03:32:19 SkyScan query done: ret=0 az=99.615<-6641 ze=-110.85<-19390 Statuses=0009 0009 03:32:19 Msec=1500 True Az=99.615 Ze=-110.85 Az status=0009 Ze status=0009 03:32:19 Check angles 03:32:19 SkyScan query 03:32:20 SkyScan query done: ret=0 az=117<-7800 ze=-131.775<-20785 Statuses=0009 0009 03:32:20 Msec=2250 True Az=117 Ze=-131.775 Az status=0009 Ze status=0009 03:32:20 Check angles 03:32:20 SkyScan query 03:32:21 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 03:32:21 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 03:32:21 Check angles 03:32:21 SkyScan query 03:32:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:32:21 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:32:21 Message to Master queued w/err=0: serial=103445 error=0 03:32:26 Received message from Master: op=Filter serial=103446 03:32:26 Color wheel filter change from 0 to 0 03:32:26 FLIGetFilterPos err=0 currentPosition=0 03:32:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:26 Filter is already there-color wheel unchanged 03:32:27 Received message from Master: op=Shutter serial=103447 03:32:27 Shutter LASER close 03:32:27 Received message from Camera: op=State serial=103449 03:32:27 GetSingleValue result=40 Value=cccccccc 03:32:27 SkyScan query 03:32:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:32:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:27 Parameters OK 03:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:27 Set A/D data flow result=40 03:32:27 Set A/D channel type result=40 03:32:27 Set A/D encoding result=40 03:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:27 Set channel filter=0.000000e+000 result=40 03:32:27 Config A/D Result=40 03:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:27 Get A/D filter: -9.255963e+061 result=40 03:32:27 Get A/D value=-858993460 result=40 03:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:27 Parameters OK 03:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:27 Set A/D data flow result=40 03:32:27 Set A/D channel type result=40 03:32:27 Set A/D encoding result=40 03:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:27 Set channel filter=0.000000e+000 result=40 03:32:27 Config A/D Result=40 03:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:27 Get A/D filter: -9.255963e+061 result=40 03:32:27 Get A/D value=-858993460 result=40 03:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:27 Aux= 03:32:27 Message to Camera, serial 103449 queued 03:33:04 Received message from Master: op=PointingHead serial=103462 03:33:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:33:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:33:04 Point started: ret=0 03:33:04 point_skyscan result=0 03:33:05 Check angles 03:33:05 SkyScan query 03:33:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 03:33:06 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 03:33:06 Check angles 03:33:06 SkyScan query 03:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:33:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:33:06 Message to Master queued w/err=0: serial=103462 error=0 03:33:11 Received message from Master: op=Filter serial=103463 03:33:11 Color wheel filter change from 0 to 0 03:33:11 FLIGetFilterPos err=0 currentPosition=0 03:33:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:11 Filter is already there-color wheel unchanged 03:33:12 Received message from Master: op=Shutter serial=103464 03:33:12 Shutter LASER open 03:33:12 Received message from Camera: op=State serial=103466 03:33:12 GetSingleValue result=40 Value=cccccccc 03:33:12 SkyScan query 03:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:33:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:12 Parameters OK 03:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:12 Set A/D data flow result=40 03:33:12 Set A/D channel type result=40 03:33:12 Set A/D encoding result=40 03:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:12 Set channel filter=0.000000e+000 result=40 03:33:12 Config A/D Result=40 03:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:12 Get A/D filter: -9.255963e+061 result=40 03:33:12 Get A/D value=-858993460 result=40 03:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:12 Parameters OK 03:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:12 Set A/D data flow result=40 03:33:12 Set A/D channel type result=40 03:33:12 Set A/D encoding result=40 03:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:12 Set channel filter=0.000000e+000 result=40 03:33:12 Config A/D Result=40 03:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:12 Get A/D filter: -9.255963e+061 result=40 03:33:12 Get A/D value=-858993460 result=40 03:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:12 Aux= 03:33:12 Message to Camera, serial 103466 queued 03:33:21 Received message from Master: op=Shutter serial=103476 03:33:21 Shutter LASER close 03:33:21 Received message from Master: op=PointingHead serial=103480 03:33:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:33:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:33:22 Point started: ret=0 03:33:22 point_skyscan result=0 03:33:22 Check angles 03:33:22 SkyScan query 03:33:23 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.86<-21524 Statuses=0009 0009 03:33:23 Msec=0 True Az=136.23 Ze=-142.86 Az status=0009 Ze status=0009 03:33:23 Check angles 03:33:23 SkyScan query 03:33:24 SkyScan query done: ret=0 az=154.095<-10273 ze=-121.5<-20100 Statuses=0009 0009 03:33:24 Msec=750 True Az=154.095 Ze=-121.5 Az status=0009 Ze status=0009 03:33:24 Check angles 03:33:24 SkyScan query 03:33:25 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.47<-18698 Statuses=0009 0009 03:33:25 Msec=1500 True Az=171.585 Ze=-100.47 Az status=0009 Ze status=0009 03:33:25 Check angles 03:33:25 SkyScan query 03:33:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.56<-17304 Statuses=0008 0009 03:33:25 Msec=2250 True Az=176.01 Ze=-79.56 Az status=0008 Ze status=0009 03:33:25 Check angles 03:33:25 SkyScan query 03:33:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.155<-15877 Statuses=0008 0009 03:33:26 Msec=3000 True Az=176.01 Ze=-58.155 Az status=0008 Ze status=0009 03:33:26 Check angles 03:33:26 SkyScan query 03:33:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:33:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:33:27 Message to Master queued w/err=0: serial=103480 error=0 03:33:32 Received message from Master: op=Filter serial=103481 03:33:32 Color wheel filter change from 0 to 0 03:33:32 FLIGetFilterPos err=0 currentPosition=0 03:33:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:32 Filter is already there-color wheel unchanged 03:33:32 Received message from Master: op=Shutter serial=103482 03:33:32 Shutter LASER close 03:33:32 Received message from Camera: op=State serial=103484 03:33:32 GetSingleValue result=40 Value=cccccccc 03:33:32 SkyScan query 03:33:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:33:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:33 Parameters OK 03:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:33 Set A/D data flow result=40 03:33:33 Set A/D channel type result=40 03:33:33 Set A/D encoding result=40 03:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:33 Set channel filter=0.000000e+000 result=40 03:33:33 Config A/D Result=40 03:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:33 Get A/D filter: -9.255963e+061 result=40 03:33:33 Get A/D value=-858993460 result=40 03:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:33 Parameters OK 03:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:33 Set A/D data flow result=40 03:33:33 Set A/D channel type result=40 03:33:33 Set A/D encoding result=40 03:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:33 Set channel filter=0.000000e+000 result=40 03:33:33 Config A/D Result=40 03:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:33 Get A/D filter: -9.255963e+061 result=40 03:33:33 Get A/D value=-858993460 result=40 03:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:33 Aux= 03:33:33 Message to Camera, serial 103484 queued 03:34:10 Received message from Master: op=PointingHead serial=103497 03:34:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:34:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:34:10 Point started: ret=0 03:34:10 point_skyscan result=0 03:34:11 Check angles 03:34:11 SkyScan query 03:34:11 SkyScan query done: ret=0 az=152.52<-10168 ze=-21.255<-13417 Statuses=0009 0009 03:34:11 Msec=0 True Az=152.52 Ze=-21.255 Az status=0009 Ze status=0009 03:34:11 Check angles 03:34:11 SkyScan query 03:34:12 SkyScan query done: ret=0 az=134.595<-8973 ze=0.105<-11993 Statuses=0009 0009 03:34:12 Msec=750 True Az=134.595 Ze=0.105 Az status=0009 Ze status=0009 03:34:12 Check angles 03:34:12 SkyScan query 03:34:13 SkyScan query done: ret=0 az=117.105<-7807 ze=21.075<-10595 Statuses=0009 0009 03:34:13 Msec=1500 True Az=117.105 Ze=21.075 Az status=0009 Ze status=0009 03:34:13 Check angles 03:34:13 SkyScan query 03:34:13 SkyScan query done: ret=0 az=99.645<-6643 ze=42.03<-9198 Statuses=0009 0009 03:34:13 Msec=2250 True Az=99.645 Ze=42.03 Az status=0009 Ze status=0009 03:34:14 Check angles 03:34:14 SkyScan query 03:34:14 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:34:14 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:34:14 Check angles 03:34:14 SkyScan query 03:34:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:34:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:34:15 Message to Master queued w/err=0: serial=103497 error=0 03:34:20 Received message from Master: op=Filter serial=103498 03:34:20 Color wheel filter change from 0 to 0 03:34:20 FLIGetFilterPos err=0 currentPosition=0 03:34:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:20 Filter is already there-color wheel unchanged 03:34:20 Received message from Master: op=Shutter serial=103499 03:34:20 Shutter LASER close 03:34:20 Received message from Camera: op=State serial=103501 03:34:20 GetSingleValue result=40 Value=cccccccc 03:34:20 SkyScan query 03:34:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:34:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:21 Parameters OK 03:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:21 Set A/D data flow result=40 03:34:21 Set A/D channel type result=40 03:34:21 Set A/D encoding result=40 03:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:21 Set channel filter=0.000000e+000 result=40 03:34:21 Config A/D Result=40 03:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:21 Get A/D filter: -9.255963e+061 result=40 03:34:21 Get A/D value=-858993460 result=40 03:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:21 Parameters OK 03:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:21 Set A/D data flow result=40 03:34:21 Set A/D channel type result=40 03:34:21 Set A/D encoding result=40 03:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:21 Set channel filter=0.000000e+000 result=40 03:34:21 Config A/D Result=40 03:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:21 Get A/D filter: -9.255963e+061 result=40 03:34:21 Get A/D value=-858993460 result=40 03:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:21 Aux= 03:34:21 Message to Camera, serial 103501 queued 03:34:58 Received message from Master: op=PointingHead serial=103514 03:34:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:34:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:34:58 Point started: ret=0 03:34:58 point_skyscan result=0 03:34:59 Check angles 03:34:59 SkyScan query 03:34:59 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 03:34:59 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 03:34:59 Check angles 03:34:59 SkyScan query 03:35:00 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 03:35:00 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 03:35:00 Check angles 03:35:00 SkyScan query 03:35:01 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 03:35:01 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 03:35:01 Check angles 03:35:01 SkyScan query 03:35:02 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 03:35:02 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 03:35:02 Check angles 03:35:02 SkyScan query 03:35:02 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:35:02 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:35:02 Check angles 03:35:02 SkyScan query 03:35:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:35:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:35:03 Message to Master queued w/err=0: serial=103514 error=0 03:35:08 Received message from Master: op=Filter serial=103515 03:35:08 Color wheel filter change from 0 to 0 03:35:08 FLIGetFilterPos err=0 currentPosition=0 03:35:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:08 Filter is already there-color wheel unchanged 03:35:08 Received message from Master: op=Shutter serial=103516 03:35:08 Shutter LASER close 03:35:08 Received message from Camera: op=State serial=103518 03:35:08 GetSingleValue result=40 Value=cccccccc 03:35:08 SkyScan query 03:35:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:35:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:09 Parameters OK 03:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:09 Set A/D data flow result=40 03:35:09 Set A/D channel type result=40 03:35:09 Set A/D encoding result=40 03:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:09 Set channel filter=0.000000e+000 result=40 03:35:09 Config A/D Result=40 03:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:09 Get A/D filter: -9.255963e+061 result=40 03:35:09 Get A/D value=-858993460 result=40 03:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:09 Parameters OK 03:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:09 Set A/D data flow result=40 03:35:09 Set A/D channel type result=40 03:35:09 Set A/D encoding result=40 03:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:09 Set channel filter=0.000000e+000 result=40 03:35:09 Config A/D Result=40 03:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:09 Get A/D filter: -9.255963e+061 result=40 03:35:09 Get A/D value=-858993460 result=40 03:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:09 Aux= 03:35:09 Message to Camera, serial 103518 queued 03:35:46 Received message from Master: op=PointingHead serial=103531 03:35:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:35:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:35:46 Point started: ret=0 03:35:46 point_skyscan result=0 03:35:47 Check angles 03:35:47 SkyScan query 03:35:47 SkyScan query done: ret=0 az=152.685<-10179 ze=8.28<-11448 Statuses=0009 0009 03:35:47 Msec=0 True Az=152.685 Ze=8.28 Az status=0009 Ze status=0009 03:35:48 Check angles 03:35:48 SkyScan query 03:35:48 SkyScan query done: ret=0 az=134.775<-8985 ze=-13.125<-12875 Statuses=0009 0009 03:35:48 Msec=750 True Az=134.775 Ze=-13.125 Az status=0009 Ze status=0009 03:35:48 Check angles 03:35:48 SkyScan query 03:35:49 SkyScan query done: ret=0 az=117.33<-7822 ze=-34.095<-14273 Statuses=0009 0009 03:35:49 Msec=1500 True Az=117.33 Ze=-34.095 Az status=0009 Ze status=0009 03:35:49 Check angles 03:35:49 SkyScan query 03:35:50 SkyScan query done: ret=0 az=99.93<-6662 ze=-51.555<-15437 Statuses=0009 0009 03:35:50 Msec=2250 True Az=99.93 Ze=-51.555 Az status=0009 Ze status=0009 03:35:50 Check angles 03:35:50 SkyScan query 03:35:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 03:35:50 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 03:35:51 Check angles 03:35:51 SkyScan query 03:35:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:35:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:35:51 Message to Master queued w/err=0: serial=103531 error=0 [UTC 2018-12-13 03:35:52] 03:35:56 Received message from Master: op=Filter serial=103532 03:35:56 Color wheel filter change from 0 to 0 03:35:56 FLIGetFilterPos err=0 currentPosition=0 03:35:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:56 Filter is already there-color wheel unchanged 03:35:56 Received message from Master: op=Shutter serial=103533 03:35:56 Shutter LASER close 03:35:56 Received message from Camera: op=State serial=103535 03:35:56 GetSingleValue result=40 Value=cccccccc 03:35:56 SkyScan query 03:35:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:35:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:57 Parameters OK 03:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:57 Set A/D data flow result=40 03:35:57 Set A/D channel type result=40 03:35:57 Set A/D encoding result=40 03:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:57 Set channel filter=0.000000e+000 result=40 03:35:57 Config A/D Result=40 03:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:57 Get A/D filter: -9.255963e+061 result=40 03:35:57 Get A/D value=-858993460 result=40 03:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:57 Parameters OK 03:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:57 Set A/D data flow result=40 03:35:57 Set A/D channel type result=40 03:35:57 Set A/D encoding result=40 03:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:57 Set channel filter=0.000000e+000 result=40 03:35:57 Config A/D Result=40 03:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:57 Get A/D filter: -9.255963e+061 result=40 03:35:57 Get A/D value=-858993460 result=40 03:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:57 Aux= 03:35:57 Message to Camera, serial 103535 queued 03:36:33 Received message from Master: op=PointingHead serial=103547 03:36:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:36:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:36:33 Point started: ret=0 03:36:33 point_skyscan result=0 03:36:34 Check angles 03:36:34 SkyScan query 03:36:35 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.105<-17407 Statuses=0009 0009 03:36:35 Msec=0 True Az=108.855 Ze=-81.105 Az status=0009 Ze status=0009 03:36:35 Check angles 03:36:35 SkyScan query 03:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 03:36:35 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 03:36:36 Check angles 03:36:36 SkyScan query 03:36:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 03:36:36 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 03:36:36 Check angles 03:36:36 SkyScan query 03:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.275<-21685 Statuses=0008 0009 03:36:37 Msec=2250 True Az=112.995 Ze=-145.275 Az status=0008 Ze status=0009 03:36:37 Check angles 03:36:37 SkyScan query 03:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.23<-23082 Statuses=0008 0009 03:36:38 Msec=3000 True Az=112.995 Ze=-166.23 Az status=0008 Ze status=0009 03:36:38 Check angles 03:36:38 SkyScan query 03:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:36:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:36:38 Message to Master queued w/err=0: serial=103547 error=0 03:36:43 Received message from Master: op=Filter serial=103548 03:36:43 Color wheel filter change from 0 to 0 03:36:43 FLIGetFilterPos err=0 currentPosition=0 03:36:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:43 Filter is already there-color wheel unchanged 03:36:44 Received message from Master: op=Shutter serial=103549 03:36:44 Shutter LASER open 03:36:44 Received message from Camera: op=State serial=103551 03:36:44 GetSingleValue result=40 Value=cccccccc 03:36:44 SkyScan query 03:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:36:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:44 Parameters OK 03:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:44 Set A/D data flow result=40 03:36:44 Set A/D channel type result=40 03:36:44 Set A/D encoding result=40 03:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:44 Set channel filter=0.000000e+000 result=40 03:36:44 Config A/D Result=40 03:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:44 Get A/D filter: -9.255963e+061 result=40 03:36:44 Get A/D value=-858993460 result=40 03:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:44 Parameters OK 03:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:44 Set A/D data flow result=40 03:36:44 Set A/D channel type result=40 03:36:44 Set A/D encoding result=40 03:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:44 Set channel filter=0.000000e+000 result=40 03:36:44 Config A/D Result=40 03:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:44 Get A/D filter: -9.255963e+061 result=40 03:36:44 Get A/D value=-858993460 result=40 03:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:44 Aux= 03:36:44 Message to Camera, serial 103551 queued 03:36:53 Received message from Master: op=Shutter serial=103561 03:36:53 Shutter LASER close 03:36:53 Received message from Master: op=PointingHead serial=103565 03:36:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:36:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:36:54 Point started: ret=0 03:36:54 point_skyscan result=0 03:36:54 Check angles 03:36:54 SkyScan query 03:36:55 SkyScan query done: ret=0 az=89.64<-5976 ze=157.035<-1531 Statuses=0009 0009 03:36:55 Msec=0 True Az=89.64 Ze=157.035 Az status=0009 Ze status=0009 03:36:55 Check angles 03:36:55 SkyScan query 03:36:56 SkyScan query done: ret=0 az=71.88<-4792 ze=135.645<-2957 Statuses=0009 0009 03:36:56 Msec=750 True Az=71.88 Ze=135.645 Az status=0009 Ze status=0009 03:36:56 Check angles 03:36:56 SkyScan query 03:36:56 SkyScan query done: ret=0 az=54.63<-3642 ze=114.69<-4354 Statuses=0009 0009 03:36:56 Msec=1500 True Az=54.63 Ze=114.69 Az status=0009 Ze status=0009 03:36:57 Check angles 03:36:57 SkyScan query 03:36:57 SkyScan query done: ret=0 az=40.92<-2728 ze=93.75<-5750 Statuses=0009 0009 03:36:57 Msec=2250 True Az=40.92 Ze=93.75 Az status=0009 Ze status=0009 03:36:57 Check angles 03:36:57 SkyScan query 03:36:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 03:36:58 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 03:36:58 Check angles 03:36:58 SkyScan query 03:36:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 03:36:59 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 03:36:59 Check angles 03:36:59 SkyScan query 03:36:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:36:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:36:59 Message to Master queued w/err=0: serial=103565 error=0 03:37:04 Received message from Master: op=Filter serial=103566 03:37:04 Color wheel filter change from 0 to 0 03:37:04 FLIGetFilterPos err=0 currentPosition=0 03:37:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:04 Filter is already there-color wheel unchanged 03:37:05 Received message from Master: op=Shutter serial=103567 03:37:05 Shutter LASER close 03:37:05 Received message from Camera: op=State serial=103569 03:37:05 GetSingleValue result=40 Value=cccccccc 03:37:05 SkyScan query 03:37:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:37:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:05 Parameters OK 03:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:05 Set A/D data flow result=40 03:37:05 Set A/D channel type result=40 03:37:05 Set A/D encoding result=40 03:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:05 Set channel filter=0.000000e+000 result=40 03:37:05 Config A/D Result=40 03:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:05 Get A/D filter: -9.255963e+061 result=40 03:37:05 Get A/D value=-858993460 result=40 03:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:05 Parameters OK 03:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:05 Set A/D data flow result=40 03:37:05 Set A/D channel type result=40 03:37:05 Set A/D encoding result=40 03:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:05 Set channel filter=0.000000e+000 result=40 03:37:05 Config A/D Result=40 03:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:05 Get A/D filter: -9.255963e+061 result=40 03:37:05 Get A/D value=-858993460 result=40 03:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:05 Aux= 03:37:05 Message to Camera, serial 103569 queued 03:37:42 Received message from Master: op=PointingHead serial=103582 03:37:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:37:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:37:42 Point started: ret=0 03:37:42 point_skyscan result=0 03:37:43 Check angles 03:37:43 SkyScan query 03:37:44 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 03:37:44 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 03:37:44 Check angles 03:37:44 SkyScan query 03:37:45 SkyScan query done: ret=0 az=81.21<-5414 ze=66.495<-7567 Statuses=0009 0008 03:37:45 Msec=750 True Az=81.21 Ze=66.495 Az status=0009 Ze status=0008 03:37:45 Check angles 03:37:45 SkyScan query 03:37:45 SkyScan query done: ret=0 az=98.67<-6578 ze=66.495<-7567 Statuses=0009 0008 03:37:45 Msec=1500 True Az=98.67 Ze=66.495 Az status=0009 Ze status=0008 03:37:45 Check angles 03:37:45 SkyScan query 03:37:46 SkyScan query done: ret=0 az=116.295<-7753 ze=66.495<-7567 Statuses=0009 0008 03:37:46 Msec=2250 True Az=116.295 Ze=66.495 Az status=0009 Ze status=0008 03:37:46 Check angles 03:37:46 SkyScan query 03:37:47 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 03:37:47 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 03:37:47 Check angles 03:37:47 SkyScan query 03:37:48 SkyScan query done: ret=0 az=151.29<-10086 ze=66.495<-7567 Statuses=0009 0008 03:37:48 Msec=3750 True Az=151.29 Ze=66.495 Az status=0009 Ze status=0008 03:37:48 Check angles 03:37:48 SkyScan query 03:37:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:37:48 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:37:48 Message to Master queued w/err=0: serial=103582 error=0 03:37:53 Received message from Master: op=Filter serial=103583 03:37:53 Color wheel filter change from 0 to 0 03:37:53 FLIGetFilterPos err=0 currentPosition=0 03:37:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:53 Filter is already there-color wheel unchanged 03:37:53 Received message from Master: op=Shutter serial=103584 03:37:53 Shutter LASER close 03:37:54 Received message from Camera: op=State serial=103586 03:37:54 GetSingleValue result=40 Value=cccccccc 03:37:54 SkyScan query 03:37:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:37:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:54 Parameters OK 03:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:54 Set A/D data flow result=40 03:37:54 Set A/D channel type result=40 03:37:54 Set A/D encoding result=40 03:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:54 Set channel filter=0.000000e+000 result=40 03:37:54 Config A/D Result=40 03:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:54 Get A/D filter: -9.255963e+061 result=40 03:37:54 Get A/D value=-858993460 result=40 03:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:54 Parameters OK 03:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:54 Set A/D data flow result=40 03:37:54 Set A/D channel type result=40 03:37:54 Set A/D encoding result=40 03:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:54 Set channel filter=0.000000e+000 result=40 03:37:54 Config A/D Result=40 03:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:54 Get A/D filter: -9.255963e+061 result=40 03:37:54 Get A/D value=-858993460 result=40 03:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:54 Aux= 03:37:54 Message to Camera, serial 103586 queued 03:38:31 Received message from Master: op=PointingHead serial=103599 03:38:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:38:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:38:31 Point started: ret=0 03:38:31 point_skyscan result=0 03:38:32 Check angles 03:38:32 SkyScan query 03:38:33 SkyScan query done: ret=0 az=134.535<-8969 ze=36.225<-9585 Statuses=0009 0009 03:38:33 Msec=0 True Az=134.535 Ze=36.225 Az status=0009 Ze status=0009 03:38:33 Check angles 03:38:33 SkyScan query 03:38:33 SkyScan query done: ret=0 az=116.7<-7780 ze=14.79<-11014 Statuses=0009 0009 03:38:33 Msec=750 True Az=116.7 Ze=14.79 Az status=0009 Ze status=0009 03:38:34 Check angles 03:38:34 SkyScan query 03:38:34 SkyScan query done: ret=0 az=99.195<-6613 ze=-6.15<-12410 Statuses=0009 0009 03:38:34 Msec=1500 True Az=99.195 Ze=-6.15 Az status=0009 Ze status=0009 03:38:34 Check angles 03:38:34 SkyScan query 03:38:35 SkyScan query done: ret=0 az=81.825<-5455 ze=-27.105<-13807 Statuses=0009 0009 03:38:35 Msec=2250 True Az=81.825 Ze=-27.105 Az status=0009 Ze status=0009 03:38:35 Check angles 03:38:35 SkyScan query 03:38:36 SkyScan query done: ret=0 az=64.38<-4292 ze=-38.58<-14572 Statuses=0009 0008 03:38:36 Msec=3000 True Az=64.38 Ze=-38.58 Az status=0009 Ze status=0008 03:38:36 Check angles 03:38:36 SkyScan query 03:38:36 SkyScan query done: ret=0 az=46.8<-3120 ze=-38.52<-14568 Statuses=0009 0008 03:38:36 Msec=3750 True Az=46.8 Ze=-38.52 Az status=0009 Ze status=0008 03:38:37 Check angles 03:38:37 SkyScan query 03:38:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:38:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:38:37 Message to Master queued w/err=0: serial=103599 error=0 03:38:42 Received message from Master: op=Filter serial=103600 03:38:42 Color wheel filter change from 0 to 0 03:38:42 FLIGetFilterPos err=0 currentPosition=0 03:38:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:42 Filter is already there-color wheel unchanged 03:38:42 Received message from Master: op=Shutter serial=103601 03:38:42 Shutter LASER close 03:38:42 Received message from Camera: op=State serial=103603 03:38:42 GetSingleValue result=40 Value=cccccccc 03:38:42 SkyScan query 03:38:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:38:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:43 Parameters OK 03:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:43 Set A/D data flow result=40 03:38:43 Set A/D channel type result=40 03:38:43 Set A/D encoding result=40 03:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:43 Set channel filter=0.000000e+000 result=40 03:38:43 Config A/D Result=40 03:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:43 Get A/D filter: -9.255963e+061 result=40 03:38:43 Get A/D value=-858993460 result=40 03:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:43 Parameters OK 03:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:43 Set A/D data flow result=40 03:38:43 Set A/D channel type result=40 03:38:43 Set A/D encoding result=40 03:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:43 Set channel filter=0.000000e+000 result=40 03:38:43 Config A/D Result=40 03:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:43 Get A/D filter: -9.255963e+061 result=40 03:38:43 Get A/D value=-858993460 result=40 03:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:43 Aux= 03:38:43 Message to Camera, serial 103603 queued 03:39:20 Received message from Master: op=PointingHead serial=103616 03:39:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:39:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:39:20 Point started: ret=0 03:39:20 point_skyscan result=0 03:39:21 Check angles 03:39:21 SkyScan query 03:39:21 SkyScan query done: ret=0 az=63.735<-4249 ze=-67.995<-16533 Statuses=0009 0009 03:39:21 Msec=0 True Az=63.735 Ze=-67.995 Az status=0009 Ze status=0009 03:39:22 Check angles 03:39:22 SkyScan query 03:39:22 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.415<-17961 Statuses=0009 0009 03:39:22 Msec=750 True Az=81.54 Ze=-89.415 Az status=0009 Ze status=0009 03:39:22 Check angles 03:39:22 SkyScan query 03:39:23 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.82<-19388 Statuses=0009 0009 03:39:23 Msec=1500 True Az=99.6 Ze=-110.82 Az status=0009 Ze status=0009 03:39:23 Check angles 03:39:23 SkyScan query 03:39:24 SkyScan query done: ret=0 az=117<-7800 ze=-131.745<-20783 Statuses=0009 0009 03:39:24 Msec=2250 True Az=117 Ze=-131.745 Az status=0009 Ze status=0009 03:39:24 Check angles 03:39:24 SkyScan query 03:39:24 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 03:39:24 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 03:39:25 Check angles 03:39:25 SkyScan query 03:39:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:39:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:39:25 Message to Master queued w/err=0: serial=103616 error=0 03:39:30 Received message from Master: op=Filter serial=103617 03:39:30 Color wheel filter change from 0 to 0 03:39:30 FLIGetFilterPos err=0 currentPosition=0 03:39:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:30 Filter is already there-color wheel unchanged 03:39:30 Received message from Master: op=Shutter serial=103618 03:39:30 Shutter LASER close 03:39:30 Received message from Camera: op=State serial=103620 03:39:30 GetSingleValue result=40 Value=cccccccc 03:39:30 SkyScan query 03:39:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:39:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:31 Parameters OK 03:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:31 Set A/D data flow result=40 03:39:31 Set A/D channel type result=40 03:39:31 Set A/D encoding result=40 03:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:31 Set channel filter=0.000000e+000 result=40 03:39:31 Config A/D Result=40 03:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:31 Get A/D filter: -9.255963e+061 result=40 03:39:31 Get A/D value=-858993460 result=40 03:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:31 Parameters OK 03:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:31 Set A/D data flow result=40 03:39:31 Set A/D channel type result=40 03:39:31 Set A/D encoding result=40 03:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:31 Set channel filter=0.000000e+000 result=40 03:39:31 Config A/D Result=40 03:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:31 Get A/D filter: -9.255963e+061 result=40 03:39:31 Get A/D value=-858993460 result=40 03:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:31 Aux= 03:39:31 Message to Camera, serial 103620 queued 03:40:08 Received message from Master: op=PointingHead serial=103633 03:40:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:40:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:40:08 Point started: ret=0 03:40:08 point_skyscan result=0 03:40:09 Check angles 03:40:09 SkyScan query 03:40:10 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 03:40:10 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 03:40:10 Check angles 03:40:10 SkyScan query 03:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:40:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:40:10 Message to Master queued w/err=0: serial=103633 error=0 03:40:15 Received message from Master: op=Filter serial=103634 03:40:15 Color wheel filter change from 0 to 0 03:40:15 FLIGetFilterPos err=0 currentPosition=0 03:40:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:15 Filter is already there-color wheel unchanged 03:40:15 Received message from Master: op=Shutter serial=103635 03:40:15 Shutter LASER open 03:40:16 Received message from Camera: op=State serial=103637 03:40:16 GetSingleValue result=40 Value=cccccccc 03:40:16 SkyScan query 03:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:40:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:16 Parameters OK 03:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:16 Set A/D data flow result=40 03:40:16 Set A/D channel type result=40 03:40:16 Set A/D encoding result=40 03:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:16 Set channel filter=0.000000e+000 result=40 03:40:16 Config A/D Result=40 03:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:16 Get A/D filter: -9.255963e+061 result=40 03:40:16 Get A/D value=-858993460 result=40 03:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:16 Parameters OK 03:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:16 Set A/D data flow result=40 03:40:16 Set A/D channel type result=40 03:40:16 Set A/D encoding result=40 03:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:16 Set channel filter=0.000000e+000 result=40 03:40:16 Config A/D Result=40 03:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:16 Get A/D filter: -9.255963e+061 result=40 03:40:16 Get A/D value=-858993460 result=40 03:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:16 Aux= 03:40:16 Message to Camera, serial 103637 queued 03:40:25 Received message from Master: op=Shutter serial=103647 03:40:25 Shutter LASER close 03:40:25 Received message from Master: op=PointingHead serial=103651 03:40:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:40:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:40:26 Point started: ret=0 03:40:26 point_skyscan result=0 03:40:26 Check angles 03:40:26 SkyScan query 03:40:27 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.205<-21547 Statuses=0009 0009 03:40:27 Msec=0 True Az=135.9 Ze=-143.205 Az status=0009 Ze status=0009 03:40:27 Check angles 03:40:27 SkyScan query 03:40:28 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.8<-20120 Statuses=0009 0009 03:40:28 Msec=750 True Az=153.765 Ze=-121.8 Az status=0009 Ze status=0009 03:40:28 Check angles 03:40:28 SkyScan query 03:40:29 SkyScan query done: ret=0 az=171.615<-11441 ze=-100.365<-18691 Statuses=0009 0009 03:40:29 Msec=1500 True Az=171.615 Ze=-100.365 Az status=0009 Ze status=0009 03:40:29 Check angles 03:40:29 SkyScan query 03:40:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.455<-17297 Statuses=0008 0009 03:40:29 Msec=2250 True Az=176.01 Ze=-79.455 Az status=0008 Ze status=0009 03:40:29 Check angles 03:40:29 SkyScan query 03:40:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 03:40:30 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 03:40:30 Check angles 03:40:30 SkyScan query 03:40:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:40:31 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:40:31 Message to Master queued w/err=0: serial=103651 error=0 03:40:36 Received message from Master: op=Filter serial=103652 03:40:36 Color wheel filter change from 0 to 0 03:40:36 FLIGetFilterPos err=0 currentPosition=0 03:40:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:36 Filter is already there-color wheel unchanged 03:40:36 Received message from Master: op=Shutter serial=103653 03:40:36 Shutter LASER close 03:40:36 Received message from Camera: op=State serial=103655 03:40:36 GetSingleValue result=40 Value=cccccccc 03:40:36 SkyScan query 03:40:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:40:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:37 Parameters OK 03:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:37 Set A/D data flow result=40 03:40:37 Set A/D channel type result=40 03:40:37 Set A/D encoding result=40 03:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:37 Set channel filter=0.000000e+000 result=40 03:40:37 Config A/D Result=40 03:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:37 Get A/D filter: -9.255963e+061 result=40 03:40:37 Get A/D value=-858993460 result=40 03:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:37 Parameters OK 03:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:37 Set A/D data flow result=40 03:40:37 Set A/D channel type result=40 03:40:37 Set A/D encoding result=40 03:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:37 Set channel filter=0.000000e+000 result=40 03:40:37 Config A/D Result=40 03:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:37 Get A/D filter: -9.255963e+061 result=40 03:40:37 Get A/D value=-858993460 result=40 03:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:37 Aux= 03:40:37 Message to Camera, serial 103655 queued 03:41:14 Received message from Master: op=PointingHead serial=103668 03:41:14 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:41:14 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:41:14 Point started: ret=0 03:41:14 point_skyscan result=0 03:41:15 Check angles 03:41:15 SkyScan query 03:41:15 SkyScan query done: ret=0 az=153.045<-10203 ze=-21.945<-13463 Statuses=0009 0009 03:41:15 Msec=0 True Az=153.045 Ze=-21.945 Az status=0009 Ze status=0009 03:41:15 Check angles 03:41:15 SkyScan query 03:41:16 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.975<-12065 Statuses=0009 0009 03:41:16 Msec=750 True Az=135.66 Ze=-0.975 Az status=0009 Ze status=0009 03:41:16 Check angles 03:41:16 SkyScan query 03:41:17 SkyScan query done: ret=0 az=118.155<-7877 ze=19.98<-10668 Statuses=0009 0009 03:41:17 Msec=1500 True Az=118.155 Ze=19.98 Az status=0009 Ze status=0009 03:41:17 Check angles 03:41:17 SkyScan query 03:41:17 SkyScan query done: ret=0 az=100.35<-6690 ze=41.4<-9240 Statuses=0009 0009 03:41:17 Msec=2250 True Az=100.35 Ze=41.4 Az status=0009 Ze status=0009 03:41:18 Check angles 03:41:18 SkyScan query 03:41:18 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 03:41:18 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 03:41:18 Check angles 03:41:18 SkyScan query 03:41:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:41:19 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:41:19 Message to Master queued w/err=0: serial=103668 error=0 03:41:24 Received message from Master: op=Filter serial=103669 03:41:24 Color wheel filter change from 0 to 0 03:41:24 FLIGetFilterPos err=0 currentPosition=0 03:41:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:24 Filter is already there-color wheel unchanged 03:41:24 Received message from Master: op=Shutter serial=103670 03:41:24 Shutter LASER close 03:41:24 Received message from Camera: op=State serial=103672 03:41:24 GetSingleValue result=40 Value=cccccccc 03:41:24 SkyScan query 03:41:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:25 Parameters OK 03:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:25 Set A/D data flow result=40 03:41:25 Set A/D channel type result=40 03:41:25 Set A/D encoding result=40 03:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:25 Set channel filter=0.000000e+000 result=40 03:41:25 Config A/D Result=40 03:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:25 Get A/D filter: -9.255963e+061 result=40 03:41:25 Get A/D value=-858993460 result=40 03:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:25 Parameters OK 03:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:25 Set A/D data flow result=40 03:41:25 Set A/D channel type result=40 03:41:25 Set A/D encoding result=40 03:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:25 Set channel filter=0.000000e+000 result=40 03:41:25 Config A/D Result=40 03:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:25 Get A/D filter: -9.255963e+061 result=40 03:41:25 Get A/D value=-858993460 result=40 03:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:25 Aux= 03:41:25 Message to Camera, serial 103672 queued 03:42:02 Received message from Master: op=PointingHead serial=103685 03:42:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:42:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:42:02 Point started: ret=0 03:42:02 point_skyscan result=0 03:42:03 Check angles 03:42:03 SkyScan query 03:42:03 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 03:42:03 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 03:42:03 Check angles 03:42:03 SkyScan query 03:42:04 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 03:42:04 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 03:42:04 Check angles 03:42:04 SkyScan query 03:42:05 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 03:42:05 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 03:42:05 Check angles 03:42:05 SkyScan query 03:42:06 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 03:42:06 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 03:42:06 Check angles 03:42:06 SkyScan query 03:42:06 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:42:06 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:42:06 Check angles 03:42:06 SkyScan query 03:42:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:42:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:42:07 Message to Master queued w/err=0: serial=103685 error=0 03:42:12 Received message from Master: op=Filter serial=103686 03:42:12 Color wheel filter change from 0 to 0 03:42:12 FLIGetFilterPos err=0 currentPosition=0 03:42:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:12 Filter is already there-color wheel unchanged 03:42:12 Received message from Master: op=Shutter serial=103687 03:42:12 Shutter LASER close 03:42:12 Received message from Camera: op=State serial=103689 03:42:12 GetSingleValue result=40 Value=cccccccc 03:42:12 SkyScan query 03:42:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:42:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:13 Parameters OK 03:42:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:13 Set A/D data flow result=40 03:42:13 Set A/D channel type result=40 03:42:13 Set A/D encoding result=40 03:42:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:13 Set channel filter=0.000000e+000 result=40 03:42:13 Config A/D Result=40 03:42:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:13 Get A/D filter: -9.255963e+061 result=40 03:42:13 Get A/D value=-858993460 result=40 03:42:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:13 Parameters OK 03:42:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:13 Set A/D data flow result=40 03:42:13 Set A/D channel type result=40 03:42:13 Set A/D encoding result=40 03:42:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:13 Set channel filter=0.000000e+000 result=40 03:42:13 Config A/D Result=40 03:42:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:13 Get A/D filter: -9.255963e+061 result=40 03:42:13 Get A/D value=-858993460 result=40 03:42:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:13 Aux= 03:42:13 Message to Camera, serial 103689 queued 03:42:50 Received message from Master: op=PointingHead serial=103702 03:42:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:42:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:42:50 Point started: ret=0 03:42:50 point_skyscan result=0 03:42:51 Check angles 03:42:51 SkyScan query 03:42:51 SkyScan query done: ret=0 az=152.76<-10184 ze=8.43<-11438 Statuses=0009 0009 03:42:51 Msec=0 True Az=152.76 Ze=8.43 Az status=0009 Ze status=0009 03:42:51 Check angles 03:42:51 SkyScan query 03:42:52 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.525<-12835 Statuses=0009 0009 03:42:52 Msec=750 True Az=135.315 Ze=-12.525 Az status=0009 Ze status=0009 03:42:52 Check angles 03:42:52 SkyScan query 03:42:53 SkyScan query done: ret=0 az=117.39<-7826 ze=-33.915<-14261 Statuses=0009 0009 03:42:53 Msec=1500 True Az=117.39 Ze=-33.915 Az status=0009 Ze status=0009 03:42:53 Check angles 03:42:53 SkyScan query 03:42:54 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.555<-15437 Statuses=0009 0009 03:42:54 Msec=2250 True Az=100.05 Ze=-51.555 Az status=0009 Ze status=0009 03:42:54 Check angles 03:42:54 SkyScan query 03:42:54 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:42:54 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:42:55 Check angles 03:42:55 SkyScan query 03:42:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:42:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:42:55 Message to Master queued w/err=0: serial=103702 error=0 03:43:00 Received message from Master: op=Filter serial=103703 03:43:00 Color wheel filter change from 0 to 0 03:43:00 FLIGetFilterPos err=0 currentPosition=0 03:43:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:00 Filter is already there-color wheel unchanged 03:43:00 Received message from Master: op=Shutter serial=103704 03:43:00 Shutter LASER close 03:43:00 Received message from Camera: op=State serial=103706 03:43:00 GetSingleValue result=40 Value=cccccccc 03:43:00 SkyScan query 03:43:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:43:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:01 Parameters OK 03:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:01 Set A/D data flow result=40 03:43:01 Set A/D channel type result=40 03:43:01 Set A/D encoding result=40 03:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:01 Set channel filter=0.000000e+000 result=40 03:43:01 Config A/D Result=40 03:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:01 Get A/D filter: -9.255963e+061 result=40 03:43:01 Get A/D value=-858993460 result=40 03:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:01 Parameters OK 03:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:01 Set A/D data flow result=40 03:43:01 Set A/D channel type result=40 03:43:01 Set A/D encoding result=40 03:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:01 Set channel filter=0.000000e+000 result=40 03:43:01 Config A/D Result=40 03:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:01 Get A/D filter: -9.255963e+061 result=40 03:43:01 Get A/D value=-858993460 result=40 03:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:01 Aux= 03:43:01 Message to Camera, serial 103706 queued 03:43:38 Received message from Master: op=PointingHead serial=103719 03:43:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:43:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:43:38 Point started: ret=0 03:43:38 point_skyscan result=0 03:43:39 Check angles 03:43:39 SkyScan query 03:43:39 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.36<-17424 Statuses=0009 0009 03:43:39 Msec=0 True Az=109.14 Ze=-81.36 Az status=0009 Ze status=0009 03:43:40 Check angles 03:43:40 SkyScan query 03:43:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 03:43:40 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 03:43:40 Check angles 03:43:40 SkyScan query 03:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 03:43:41 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 03:43:41 Check angles 03:43:41 SkyScan query 03:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 03:43:42 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 03:43:42 Check angles 03:43:42 SkyScan query 03:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 03:43:42 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 03:43:43 Check angles 03:43:43 SkyScan query 03:43:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:43:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:43:43 Message to Master queued w/err=0: serial=103719 error=0 03:43:48 Received message from Master: op=Filter serial=103720 03:43:48 Color wheel filter change from 0 to 0 03:43:48 FLIGetFilterPos err=0 currentPosition=0 03:43:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:48 Filter is already there-color wheel unchanged 03:43:48 Received message from Master: op=Shutter serial=103721 03:43:48 Shutter LASER open 03:43:49 Received message from Camera: op=State serial=103723 03:43:49 GetSingleValue result=40 Value=cccccccc 03:43:49 SkyScan query 03:43:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:43:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:49 Parameters OK 03:43:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:49 Set A/D data flow result=40 03:43:49 Set A/D channel type result=40 03:43:49 Set A/D encoding result=40 03:43:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:49 Set channel filter=0.000000e+000 result=40 03:43:49 Config A/D Result=40 03:43:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:49 Get A/D filter: -9.255963e+061 result=40 03:43:49 Get A/D value=-858993460 result=40 03:43:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:49 Parameters OK 03:43:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:49 Set A/D data flow result=40 03:43:49 Set A/D channel type result=40 03:43:49 Set A/D encoding result=40 03:43:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:49 Set channel filter=0.000000e+000 result=40 03:43:49 Config A/D Result=40 03:43:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:49 Get A/D filter: -9.255963e+061 result=40 03:43:49 Get A/D value=-858993460 result=40 03:43:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:49 Aux= 03:43:49 Message to Camera, serial 103723 queued 03:43:58 Received message from Master: op=Shutter serial=103733 03:43:58 Shutter LASER close 03:43:58 Received message from Master: op=PointingHead serial=103737 03:43:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:43:58 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:43:58 Point started: ret=0 03:43:58 point_skyscan result=0 03:43:59 Check angles 03:43:59 SkyScan query 03:44:00 SkyScan query done: ret=0 az=89.82<-5988 ze=157.14<-1524 Statuses=0009 0009 03:44:00 Msec=0 True Az=89.82 Ze=157.14 Az status=0009 Ze status=0009 03:44:00 Check angles 03:44:00 SkyScan query 03:44:00 SkyScan query done: ret=0 az=72.33<-4822 ze=136.2<-2920 Statuses=0009 0009 03:44:00 Msec=750 True Az=72.33 Ze=136.2 Az status=0009 Ze status=0009 03:44:01 Check angles 03:44:01 SkyScan query 03:44:01 SkyScan query done: ret=0 az=54.69<-3646 ze=114.78<-4348 Statuses=0009 0009 03:44:01 Msec=1500 True Az=54.69 Ze=114.78 Az status=0009 Ze status=0009 03:44:01 Check angles 03:44:01 SkyScan query 03:44:02 SkyScan query done: ret=0 az=40.98<-2732 ze=93.39<-5774 Statuses=0009 0009 03:44:02 Msec=2250 True Az=40.98 Ze=93.39 Az status=0009 Ze status=0009 03:44:02 Check angles 03:44:02 SkyScan query 03:44:03 SkyScan query done: ret=0 az=40.995<-2733 ze=72.42<-7172 Statuses=0008 0009 03:44:03 Msec=3000 True Az=40.995 Ze=72.42 Az status=0008 Ze status=0009 03:44:03 Check angles 03:44:03 SkyScan query 03:44:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 03:44:03 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 03:44:04 Check angles 03:44:04 SkyScan query 03:44:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:44:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:44:04 Message to Master queued w/err=0: serial=103737 error=0 03:44:09 Received message from Master: op=Filter serial=103738 03:44:09 Color wheel filter change from 0 to 0 03:44:09 FLIGetFilterPos err=0 currentPosition=0 03:44:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:09 Filter is already there-color wheel unchanged 03:44:10 Received message from Master: op=Shutter serial=103739 03:44:10 Shutter LASER close 03:44:10 Received message from Camera: op=State serial=103741 03:44:10 GetSingleValue result=40 Value=cccccccc 03:44:10 SkyScan query 03:44:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:44:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:11 Parameters OK 03:44:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:11 Set A/D data flow result=40 03:44:11 Set A/D channel type result=40 03:44:11 Set A/D encoding result=40 03:44:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:11 Set channel filter=0.000000e+000 result=40 03:44:11 Config A/D Result=40 03:44:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:11 Get A/D filter: -9.255963e+061 result=40 03:44:11 Get A/D value=-858993460 result=40 03:44:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:11 Parameters OK 03:44:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:11 Set A/D data flow result=40 03:44:11 Set A/D channel type result=40 03:44:11 Set A/D encoding result=40 03:44:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:11 Set channel filter=0.000000e+000 result=40 03:44:11 Config A/D Result=40 03:44:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:11 Get A/D filter: -9.255963e+061 result=40 03:44:11 Get A/D value=-858993460 result=40 03:44:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:11 Aux= 03:44:11 Message to Camera, serial 103741 queued 03:44:47 Received message from Master: op=PointingHead serial=103754 03:44:47 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:44:47 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:44:48 Point started: ret=0 03:44:48 point_skyscan result=0 03:44:49 Check angles 03:44:49 SkyScan query 03:44:49 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 03:44:49 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 03:44:49 Check angles 03:44:49 SkyScan query 03:44:50 SkyScan query done: ret=0 az=81.855<-5457 ze=66.495<-7567 Statuses=0009 0008 03:44:50 Msec=750 True Az=81.855 Ze=66.495 Az status=0009 Ze status=0008 03:44:50 Check angles 03:44:50 SkyScan query 03:44:51 SkyScan query done: ret=0 az=99.885<-6659 ze=66.495<-7567 Statuses=0009 0008 03:44:51 Msec=1500 True Az=99.885 Ze=66.495 Az status=0009 Ze status=0008 03:44:51 Check angles 03:44:51 SkyScan query 03:44:51 SkyScan query done: ret=0 az=117.375<-7825 ze=66.495<-7567 Statuses=0009 0008 03:44:51 Msec=2250 True Az=117.375 Ze=66.495 Az status=0009 Ze status=0008 03:44:52 Check angles 03:44:52 SkyScan query 03:44:52 SkyScan query done: ret=0 az=134.805<-8987 ze=66.495<-7567 Statuses=0009 0008 03:44:52 Msec=3000 True Az=134.805 Ze=66.495 Az status=0009 Ze status=0008 03:44:52 Check angles 03:44:52 SkyScan query 03:44:53 SkyScan query done: ret=0 az=152.295<-10153 ze=66.495<-7567 Statuses=0009 0008 03:44:53 Msec=3750 True Az=152.295 Ze=66.495 Az status=0009 Ze status=0008 03:44:53 Check angles 03:44:53 SkyScan query 03:44:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:44:54 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:44:54 Message to Master queued w/err=0: serial=103754 error=0 03:44:59 Received message from Master: op=Filter serial=103755 03:44:59 Color wheel filter change from 0 to 0 03:44:59 FLIGetFilterPos err=0 currentPosition=0 03:44:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:59 Filter is already there-color wheel unchanged 03:44:59 Received message from Master: op=Shutter serial=103756 03:44:59 Shutter LASER close 03:44:59 Received message from Camera: op=State serial=103758 03:44:59 GetSingleValue result=40 Value=cccccccc 03:44:59 SkyScan query 03:44:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:44:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:59 Parameters OK 03:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:59 Set A/D data flow result=40 03:44:59 Set A/D channel type result=40 03:44:59 Set A/D encoding result=40 03:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:59 Set channel filter=0.000000e+000 result=40 03:44:59 Config A/D Result=40 03:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:59 Get A/D filter: -9.255963e+061 result=40 03:44:59 Get A/D value=-858993460 result=40 03:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:59 Parameters OK 03:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:59 Set A/D data flow result=40 03:44:59 Set A/D channel type result=40 03:44:59 Set A/D encoding result=40 03:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:59 Set channel filter=0.000000e+000 result=40 03:44:59 Config A/D Result=40 03:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:59 Get A/D filter: -9.255963e+061 result=40 03:44:59 Get A/D value=-858993460 result=40 03:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:59 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:59 Aux= 03:44:59 Message to Camera, serial 103758 queued 03:45:27 Received message from Master: op=Identify serial=103759 03:45:36 Received message from Master: op=PointingHead serial=103774 03:45:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:45:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:45:37 Point started: ret=0 03:45:37 point_skyscan result=0 03:45:37 Check angles 03:45:37 SkyScan query 03:45:38 SkyScan query done: ret=0 az=134.52<-8968 ze=36.18<-9588 Statuses=0009 0009 03:45:38 Msec=0 True Az=134.52 Ze=36.18 Az status=0009 Ze status=0009 03:45:38 Check angles 03:45:38 SkyScan query 03:45:39 SkyScan query done: ret=0 az=117.06<-7804 ze=15.225<-10985 Statuses=0009 0009 03:45:39 Msec=750 True Az=117.06 Ze=15.225 Az status=0009 Ze status=0009 03:45:39 Check angles 03:45:39 SkyScan query 03:45:40 SkyScan query done: ret=0 az=99.645<-6643 ze=-5.745<-12383 Statuses=0009 0009 03:45:40 Msec=1500 True Az=99.645 Ze=-5.745 Az status=0009 Ze status=0009 03:45:40 Check angles 03:45:40 SkyScan query 03:45:40 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.685<-13779 Statuses=0009 0009 03:45:40 Msec=2250 True Az=82.125 Ze=-26.685 Az status=0009 Ze status=0009 03:45:40 Check angles 03:45:40 SkyScan query 03:45:41 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.565<-14571 Statuses=0009 0008 [UTC 2018-12-13 03:45:41] 03:45:41 Msec=3000 True Az=64.68 Ze=-38.565 Az status=0009 Ze status=0008 03:45:41 Check angles 03:45:41 SkyScan query 03:45:42 SkyScan query done: ret=0 az=47.235<-3149 ze=-38.535<-14569 Statuses=0009 0008 03:45:42 Msec=3750 True Az=47.235 Ze=-38.535 Az status=0009 Ze status=0008 03:45:42 Check angles 03:45:42 SkyScan query 03:45:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:45:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:45:43 Message to Master queued w/err=0: serial=103774 error=0 03:45:48 Received message from Master: op=Filter serial=103775 03:45:48 Color wheel filter change from 0 to 0 03:45:48 FLIGetFilterPos err=0 currentPosition=0 03:45:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:48 Filter is already there-color wheel unchanged 03:45:48 Received message from Master: op=Shutter serial=103776 03:45:48 Shutter LASER close 03:45:48 Received message from Camera: op=State serial=103778 03:45:48 GetSingleValue result=40 Value=cccccccc 03:45:48 SkyScan query 03:45:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:45:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:48 Parameters OK 03:45:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:48 Set A/D data flow result=40 03:45:48 Set A/D channel type result=40 03:45:48 Set A/D encoding result=40 03:45:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:48 Set channel filter=0.000000e+000 result=40 03:45:48 Config A/D Result=40 03:45:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:48 Get A/D filter: -9.255963e+061 result=40 03:45:48 Get A/D value=-858993460 result=40 03:45:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:48 Parameters OK 03:45:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:48 Set A/D data flow result=40 03:45:48 Set A/D channel type result=40 03:45:48 Set A/D encoding result=40 03:45:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:48 Set channel filter=0.000000e+000 result=40 03:45:48 Config A/D Result=40 03:45:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:48 Get A/D filter: -9.255963e+061 result=40 03:45:48 Get A/D value=-858993460 result=40 03:45:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:48 Aux= 03:45:48 Message to Camera, serial 103778 queued 03:46:25 Received message from Master: op=PointingHead serial=103791 03:46:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:46:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:46:26 Point started: ret=0 03:46:26 point_skyscan result=0 03:46:26 Check angles 03:46:26 SkyScan query 03:46:27 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.19<-16546 Statuses=0009 0009 03:46:27 Msec=0 True Az=63.945 Ze=-68.19 Az status=0009 Ze status=0009 03:46:27 Check angles 03:46:27 SkyScan query 03:46:28 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.22<-17948 Statuses=0009 0009 03:46:28 Msec=750 True Az=81.285 Ze=-89.22 Az status=0009 Ze status=0009 03:46:28 Check angles 03:46:28 SkyScan query 03:46:28 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.13<-19342 Statuses=0009 0009 03:46:28 Msec=1500 True Az=98.82 Ze=-110.13 Az status=0009 Ze status=0009 03:46:29 Check angles 03:46:29 SkyScan query 03:46:29 SkyScan query done: ret=0 az=116.37<-7758 ze=-131.115<-20741 Statuses=0009 0009 03:46:29 Msec=2250 True Az=116.37 Ze=-131.115 Az status=0009 Ze status=0009 03:46:29 Check angles 03:46:29 SkyScan query 03:46:30 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 03:46:30 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 03:46:30 Check angles 03:46:30 SkyScan query 03:46:31 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:46:31 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:46:31 Message to Master queued w/err=0: serial=103791 error=0 03:46:36 Received message from Master: op=Filter serial=103792 03:46:36 Color wheel filter change from 0 to 0 03:46:36 FLIGetFilterPos err=0 currentPosition=0 03:46:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:36 Filter is already there-color wheel unchanged 03:46:36 Received message from Master: op=Shutter serial=103793 03:46:36 Shutter LASER close 03:46:36 Received message from Camera: op=State serial=103795 03:46:36 GetSingleValue result=40 Value=cccccccc 03:46:36 SkyScan query 03:46:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:46:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:36 Parameters OK 03:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:36 Set A/D data flow result=40 03:46:36 Set A/D channel type result=40 03:46:36 Set A/D encoding result=40 03:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:36 Set channel filter=0.000000e+000 result=40 03:46:36 Config A/D Result=40 03:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:36 Get A/D filter: -9.255963e+061 result=40 03:46:36 Get A/D value=-858993460 result=40 03:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:36 Parameters OK 03:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:36 Set A/D data flow result=40 03:46:36 Set A/D channel type result=40 03:46:36 Set A/D encoding result=40 03:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:36 Set channel filter=0.000000e+000 result=40 03:46:36 Config A/D Result=40 03:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:36 Get A/D filter: -9.255963e+061 result=40 03:46:36 Get A/D value=-858993460 result=40 03:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:36 Aux= 03:46:36 Message to Camera, serial 103795 queued 03:47:13 Received message from Master: op=PointingHead serial=103808 03:47:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:47:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:47:14 Point started: ret=0 03:47:14 point_skyscan result=0 03:47:14 Check angles 03:47:14 SkyScan query 03:47:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 03:47:15 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 03:47:15 Check angles 03:47:15 SkyScan query 03:47:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:47:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:47:16 Message to Master queued w/err=0: serial=103808 error=0 03:47:21 Received message from Master: op=Filter serial=103809 03:47:21 Color wheel filter change from 0 to 0 03:47:21 FLIGetFilterPos err=0 currentPosition=0 03:47:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:21 Filter is already there-color wheel unchanged 03:47:21 Received message from Master: op=Shutter serial=103810 03:47:21 Shutter LASER open 03:47:21 Received message from Camera: op=State serial=103812 03:47:21 GetSingleValue result=40 Value=cccccccc 03:47:21 SkyScan query 03:47:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:47:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:22 Parameters OK 03:47:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:22 Set A/D data flow result=40 03:47:22 Set A/D channel type result=40 03:47:22 Set A/D encoding result=40 03:47:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:22 Set channel filter=0.000000e+000 result=40 03:47:22 Config A/D Result=40 03:47:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:22 Get A/D filter: -9.255963e+061 result=40 03:47:22 Get A/D value=-858993460 result=40 03:47:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:22 Parameters OK 03:47:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:22 Set A/D data flow result=40 03:47:22 Set A/D channel type result=40 03:47:22 Set A/D encoding result=40 03:47:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:22 Set channel filter=0.000000e+000 result=40 03:47:22 Config A/D Result=40 03:47:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:22 Get A/D filter: -9.255963e+061 result=40 03:47:22 Get A/D value=-858993460 result=40 03:47:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:22 Aux= 03:47:22 Message to Camera, serial 103812 queued 03:47:30 Received message from Master: op=Shutter serial=103822 03:47:30 Shutter LASER close 03:47:31 Received message from Master: op=PointingHead serial=103826 03:47:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:47:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:47:31 Point started: ret=0 03:47:31 point_skyscan result=0 03:47:32 Check angles 03:47:32 SkyScan query 03:47:32 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.295<-21553 Statuses=0009 0009 03:47:32 Msec=0 True Az=135.9 Ze=-143.295 Az status=0009 Ze status=0009 03:47:32 Check angles 03:47:32 SkyScan query 03:47:33 SkyScan query done: ret=0 az=153.405<-10227 ze=-122.34<-20156 Statuses=0009 0009 03:47:33 Msec=750 True Az=153.405 Ze=-122.34 Az status=0009 Ze status=0009 03:47:33 Check angles 03:47:33 SkyScan query 03:47:34 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.445<-18763 Statuses=0009 0009 03:47:34 Msec=1500 True Az=170.85 Ze=-101.445 Az status=0009 Ze status=0009 03:47:34 Check angles 03:47:34 SkyScan query 03:47:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.43<-17362 Statuses=0008 0009 03:47:35 Msec=2250 True Az=176.01 Ze=-80.43 Az status=0008 Ze status=0009 03:47:35 Check angles 03:47:35 SkyScan query 03:47:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.49<-15966 Statuses=0008 0009 03:47:35 Msec=3000 True Az=176.01 Ze=-59.49 Az status=0008 Ze status=0009 03:47:35 Check angles 03:47:35 SkyScan query 03:47:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 03:47:36 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 03:47:36 Message to Master queued w/err=0: serial=103826 error=0 03:47:41 Received message from Master: op=Filter serial=103827 03:47:41 Color wheel filter change from 0 to 0 03:47:41 FLIGetFilterPos err=0 currentPosition=0 03:47:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:41 Filter is already there-color wheel unchanged 03:47:41 Received message from Master: op=Shutter serial=103828 03:47:41 Shutter LASER close 03:47:41 Received message from Camera: op=State serial=103830 03:47:41 GetSingleValue result=40 Value=cccccccc 03:47:41 SkyScan query 03:47:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:47:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:42 Parameters OK 03:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:42 Set A/D data flow result=40 03:47:42 Set A/D channel type result=40 03:47:42 Set A/D encoding result=40 03:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:42 Set channel filter=0.000000e+000 result=40 03:47:42 Config A/D Result=40 03:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:42 Get A/D filter: -9.255963e+061 result=40 03:47:42 Get A/D value=-858993460 result=40 03:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:42 Parameters OK 03:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:42 Set A/D data flow result=40 03:47:42 Set A/D channel type result=40 03:47:42 Set A/D encoding result=40 03:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:42 Set channel filter=0.000000e+000 result=40 03:47:42 Config A/D Result=40 03:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:42 Get A/D filter: -9.255963e+061 result=40 03:47:42 Get A/D value=-858993460 result=40 03:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:42 Aux= 03:47:42 Message to Camera, serial 103830 queued 03:48:19 Received message from Master: op=PointingHead serial=103843 03:48:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:48:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:48:19 Point started: ret=0 03:48:19 point_skyscan result=0 03:48:20 Check angles 03:48:20 SkyScan query 03:48:20 SkyScan query done: ret=0 az=153.195<-10213 ze=-21.975<-13465 Statuses=0009 0009 03:48:20 Msec=0 True Az=153.195 Ze=-21.975 Az status=0009 Ze status=0009 03:48:21 Check angles 03:48:21 SkyScan query 03:48:21 SkyScan query done: ret=0 az=135.765<-9051 ze=-0.99<-12066 Statuses=0009 0009 03:48:21 Msec=750 True Az=135.765 Ze=-0.99 Az status=0009 Ze status=0009 03:48:21 Check angles 03:48:21 SkyScan query 03:48:22 SkyScan query done: ret=0 az=118.185<-7879 ze=19.95<-10670 Statuses=0009 0009 03:48:22 Msec=1500 True Az=118.185 Ze=19.95 Az status=0009 Ze status=0009 03:48:22 Check angles 03:48:22 SkyScan query 03:48:23 SkyScan query done: ret=0 az=100.785<-6719 ze=40.92<-9272 Statuses=0009 0009 03:48:23 Msec=2250 True Az=100.785 Ze=40.92 Az status=0009 Ze status=0009 03:48:23 Check angles 03:48:23 SkyScan query 03:48:23 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:48:23 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:48:24 Check angles 03:48:24 SkyScan query 03:48:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:48:24 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:48:24 Message to Master queued w/err=0: serial=103843 error=0 03:48:29 Received message from Master: op=Filter serial=103844 03:48:29 Color wheel filter change from 0 to 0 03:48:29 FLIGetFilterPos err=0 currentPosition=0 03:48:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:29 Filter is already there-color wheel unchanged 03:48:29 Received message from Master: op=Shutter serial=103845 03:48:29 Shutter LASER close 03:48:29 Received message from Camera: op=State serial=103847 03:48:29 GetSingleValue result=40 Value=cccccccc 03:48:29 SkyScan query 03:48:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:48:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:30 Parameters OK 03:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:30 Set A/D data flow result=40 03:48:30 Set A/D channel type result=40 03:48:30 Set A/D encoding result=40 03:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:30 Set channel filter=0.000000e+000 result=40 03:48:30 Config A/D Result=40 03:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:30 Get A/D filter: -9.255963e+061 result=40 03:48:30 Get A/D value=-858993460 result=40 03:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:30 Parameters OK 03:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:30 Set A/D data flow result=40 03:48:30 Set A/D channel type result=40 03:48:30 Set A/D encoding result=40 03:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:30 Set channel filter=0.000000e+000 result=40 03:48:30 Config A/D Result=40 03:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:30 Get A/D filter: -9.255963e+061 result=40 03:48:30 Get A/D value=-858993460 result=40 03:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:30 Aux= 03:48:30 Message to Camera, serial 103847 queued 03:49:07 Received message from Master: op=PointingHead serial=103860 03:49:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:49:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:49:07 Point started: ret=0 03:49:07 point_skyscan result=0 03:49:08 Check angles 03:49:08 SkyScan query 03:49:09 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 03:49:09 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 03:49:09 Check angles 03:49:09 SkyScan query 03:49:09 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 03:49:09 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 03:49:09 Check angles 03:49:09 SkyScan query 03:49:10 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 03:49:10 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 03:49:10 Check angles 03:49:10 SkyScan query 03:49:11 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 03:49:11 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 03:49:11 Check angles 03:49:11 SkyScan query 03:49:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:49:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:49:12 Check angles 03:49:12 SkyScan query 03:49:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:49:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:49:12 Message to Master queued w/err=0: serial=103860 error=0 03:49:17 Received message from Master: op=Filter serial=103861 03:49:17 Color wheel filter change from 0 to 0 03:49:17 FLIGetFilterPos err=0 currentPosition=0 03:49:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:17 Filter is already there-color wheel unchanged 03:49:17 Received message from Master: op=Shutter serial=103862 03:49:17 Shutter LASER close 03:49:17 Received message from Camera: op=State serial=103864 03:49:17 GetSingleValue result=40 Value=cccccccc 03:49:17 SkyScan query 03:49:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:49:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:18 Parameters OK 03:49:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:18 Set A/D data flow result=40 03:49:18 Set A/D channel type result=40 03:49:18 Set A/D encoding result=40 03:49:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:18 Set channel filter=0.000000e+000 result=40 03:49:18 Config A/D Result=40 03:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:18 Get A/D filter: -9.255963e+061 result=40 03:49:18 Get A/D value=-858993460 result=40 03:49:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:18 Parameters OK 03:49:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:18 Set A/D data flow result=40 03:49:18 Set A/D channel type result=40 03:49:18 Set A/D encoding result=40 03:49:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:18 Set channel filter=0.000000e+000 result=40 03:49:18 Config A/D Result=40 03:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:18 Get A/D filter: -9.255963e+061 result=40 03:49:18 Get A/D value=-858993460 result=40 03:49:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:18 Aux= 03:49:18 Message to Camera, serial 103864 queued 03:49:55 Received message from Master: op=PointingHead serial=103877 03:49:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:49:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:49:55 Point started: ret=0 03:49:55 point_skyscan result=0 03:49:56 Check angles 03:49:56 SkyScan query 03:49:57 SkyScan query done: ret=0 az=153.18<-10212 ze=8.925<-11405 Statuses=0009 0009 03:49:57 Msec=0 True Az=153.18 Ze=8.925 Az status=0009 Ze status=0009 03:49:57 Check angles 03:49:57 SkyScan query 03:49:57 SkyScan query done: ret=0 az=135.81<-9054 ze=-12.03<-12802 Statuses=0009 0009 03:49:57 Msec=750 True Az=135.81 Ze=-12.03 Az status=0009 Ze status=0009 03:49:57 Check angles 03:49:57 SkyScan query 03:49:58 SkyScan query done: ret=0 az=117.87<-7858 ze=-33.405<-14227 Statuses=0009 0009 03:49:58 Msec=1500 True Az=117.87 Ze=-33.405 Az status=0009 Ze status=0009 03:49:58 Check angles 03:49:58 SkyScan query 03:49:59 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.555<-15437 Statuses=0009 0009 03:49:59 Msec=2250 True Az=100.08 Ze=-51.555 Az status=0009 Ze status=0009 03:49:59 Check angles 03:49:59 SkyScan query 03:50:00 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 03:50:00 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 03:50:00 Check angles 03:50:00 SkyScan query 03:50:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:50:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:50:00 Message to Master queued w/err=0: serial=103877 error=0 03:50:05 Received message from Master: op=Filter serial=103878 03:50:05 Color wheel filter change from 0 to 0 03:50:05 FLIGetFilterPos err=0 currentPosition=0 03:50:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:05 Filter is already there-color wheel unchanged 03:50:06 Received message from Master: op=Shutter serial=103879 03:50:06 Shutter LASER close 03:50:06 Received message from Camera: op=State serial=103881 03:50:06 GetSingleValue result=40 Value=cccccccc 03:50:06 SkyScan query 03:50:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:50:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:06 Parameters OK 03:50:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:06 Set A/D data flow result=40 03:50:06 Set A/D channel type result=40 03:50:06 Set A/D encoding result=40 03:50:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:06 Set channel filter=0.000000e+000 result=40 03:50:06 Config A/D Result=40 03:50:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:06 Get A/D filter: -9.255963e+061 result=40 03:50:06 Get A/D value=-858993460 result=40 03:50:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:06 Parameters OK 03:50:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:06 Set A/D data flow result=40 03:50:06 Set A/D channel type result=40 03:50:06 Set A/D encoding result=40 03:50:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:06 Set channel filter=0.000000e+000 result=40 03:50:06 Config A/D Result=40 03:50:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:06 Get A/D filter: -9.255963e+061 result=40 03:50:06 Get A/D value=-858993460 result=40 03:50:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:06 Aux= 03:50:06 Message to Camera, serial 103881 queued 03:50:43 Received message from Master: op=PointingHead serial=103894 03:50:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:50:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:50:43 Point started: ret=0 03:50:43 point_skyscan result=0 03:50:44 Check angles 03:50:44 SkyScan query 03:50:45 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.525<-17435 Statuses=0009 0009 03:50:45 Msec=0 True Az=109.14 Ze=-81.525 Az status=0009 Ze status=0009 03:50:45 Check angles 03:50:45 SkyScan query 03:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 03:50:46 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 03:50:46 Check angles 03:50:46 SkyScan query 03:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 03:50:46 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 03:50:46 Check angles 03:50:46 SkyScan query 03:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 03:50:47 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 03:50:47 Check angles 03:50:47 SkyScan query 03:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 03:50:48 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 03:50:48 Check angles 03:50:48 SkyScan query 03:50:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:50:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:50:49 Message to Master queued w/err=0: serial=103894 error=0 03:50:54 Received message from Master: op=Filter serial=103895 03:50:54 Color wheel filter change from 0 to 0 03:50:54 FLIGetFilterPos err=0 currentPosition=0 03:50:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:54 Filter is already there-color wheel unchanged 03:50:54 Received message from Master: op=Shutter serial=103896 03:50:54 Shutter LASER open 03:50:54 Received message from Camera: op=State serial=103898 03:50:54 GetSingleValue result=40 Value=cccccccc 03:50:54 SkyScan query 03:50:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:50:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:54 Parameters OK 03:50:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:54 Set A/D data flow result=40 03:50:54 Set A/D channel type result=40 03:50:54 Set A/D encoding result=40 03:50:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:54 Set channel filter=0.000000e+000 result=40 03:50:54 Config A/D Result=40 03:50:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:54 Get A/D filter: -9.255963e+061 result=40 03:50:54 Get A/D value=-858993460 result=40 03:50:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:54 Parameters OK 03:50:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:54 Set A/D data flow result=40 03:50:54 Set A/D channel type result=40 03:50:54 Set A/D encoding result=40 03:50:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:54 Set channel filter=0.000000e+000 result=40 03:50:54 Config A/D Result=40 03:50:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:54 Get A/D filter: -9.255963e+061 result=40 03:50:54 Get A/D value=-858993460 result=40 03:50:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:54 Aux= 03:50:54 Message to Camera, serial 103898 queued 03:51:03 Received message from Master: op=Shutter serial=103908 03:51:03 Shutter LASER close 03:51:03 Received message from Master: op=PointingHead serial=103912 03:51:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:51:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:51:04 Point started: ret=0 03:51:04 point_skyscan result=0 03:51:04 Check angles 03:51:04 SkyScan query 03:51:05 SkyScan query done: ret=0 az=90.105<-6007 ze=157.38<-1508 Statuses=0009 0009 03:51:05 Msec=0 True Az=90.105 Ze=157.38 Az status=0009 Ze status=0009 03:51:05 Check angles 03:51:05 SkyScan query 03:51:06 SkyScan query done: ret=0 az=72.69<-4846 ze=136.425<-2905 Statuses=0009 0009 03:51:06 Msec=750 True Az=72.69 Ze=136.425 Az status=0009 Ze status=0009 03:51:06 Check angles 03:51:06 SkyScan query 03:51:06 SkyScan query done: ret=0 az=55.14<-3676 ze=115.485<-4301 Statuses=0009 0009 03:51:06 Msec=1500 True Az=55.14 Ze=115.485 Az status=0009 Ze status=0009 03:51:07 Check angles 03:51:07 SkyScan query 03:51:07 SkyScan query done: ret=0 az=40.86<-2724 ze=94.065<-5729 Statuses=0009 0009 03:51:07 Msec=2250 True Az=40.86 Ze=94.065 Az status=0009 Ze status=0009 03:51:07 Check angles 03:51:07 SkyScan query 03:51:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 03:51:08 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 03:51:08 Check angles 03:51:08 SkyScan query 03:51:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 03:51:09 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 03:51:09 Check angles 03:51:09 SkyScan query 03:51:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:51:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:51:10 Message to Master queued w/err=0: serial=103912 error=0 03:51:15 Received message from Master: op=Filter serial=103913 03:51:15 Color wheel filter change from 0 to 0 03:51:15 FLIGetFilterPos err=0 currentPosition=0 03:51:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:15 Filter is already there-color wheel unchanged 03:51:15 Received message from Master: op=Shutter serial=103914 03:51:15 Shutter LASER close 03:51:15 Received message from Camera: op=State serial=103916 03:51:15 GetSingleValue result=40 Value=cccccccc 03:51:15 SkyScan query 03:51:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:51:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:15 Parameters OK 03:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:15 Set A/D data flow result=40 03:51:15 Set A/D channel type result=40 03:51:15 Set A/D encoding result=40 03:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:15 Set channel filter=0.000000e+000 result=40 03:51:15 Config A/D Result=40 03:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:15 Get A/D filter: -9.255963e+061 result=40 03:51:15 Get A/D value=-858993460 result=40 03:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:15 Parameters OK 03:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:15 Set A/D data flow result=40 03:51:15 Set A/D channel type result=40 03:51:15 Set A/D encoding result=40 03:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:15 Set channel filter=0.000000e+000 result=40 03:51:15 Config A/D Result=40 03:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:15 Get A/D filter: -9.255963e+061 result=40 03:51:15 Get A/D value=-858993460 result=40 03:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:15 Aux= 03:51:15 Message to Camera, serial 103916 queued 03:51:51 Received message from Master: op=PointingHead serial=103928 03:51:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:51:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:51:52 Point started: ret=0 03:51:52 point_skyscan result=0 03:51:52 Check angles 03:51:52 SkyScan query 03:51:53 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 03:51:53 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 03:51:53 Check angles 03:51:53 SkyScan query 03:51:54 SkyScan query done: ret=0 az=82.245<-5483 ze=66.495<-7567 Statuses=0009 0008 03:51:54 Msec=750 True Az=82.245 Ze=66.495 Az status=0009 Ze status=0008 03:51:54 Check angles 03:51:54 SkyScan query 03:51:55 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 03:51:55 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 03:51:55 Check angles 03:51:55 SkyScan query 03:51:55 SkyScan query done: ret=0 az=117.225<-7815 ze=66.495<-7567 Statuses=0009 0008 03:51:55 Msec=2250 True Az=117.225 Ze=66.495 Az status=0009 Ze status=0008 03:51:55 Check angles 03:51:55 SkyScan query 03:51:56 SkyScan query done: ret=0 az=134.955<-8997 ze=66.495<-7567 Statuses=0009 0008 03:51:56 Msec=3000 True Az=134.955 Ze=66.495 Az status=0009 Ze status=0008 03:51:56 Check angles 03:51:56 SkyScan query 03:51:57 SkyScan query done: ret=0 az=152.52<-10168 ze=66.495<-7567 Statuses=0009 0008 03:51:57 Msec=3750 True Az=152.52 Ze=66.495 Az status=0009 Ze status=0008 03:51:57 Check angles 03:51:57 SkyScan query 03:51:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:51:58 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:51:58 Message to Master queued w/err=0: serial=103928 error=0 03:52:03 Received message from Master: op=Filter serial=103929 03:52:03 Color wheel filter change from 0 to 0 03:52:03 FLIGetFilterPos err=0 currentPosition=0 03:52:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:03 Filter is already there-color wheel unchanged 03:52:03 Received message from Master: op=Shutter serial=103930 03:52:03 Shutter LASER close 03:52:03 Received message from Camera: op=State serial=103932 03:52:03 GetSingleValue result=40 Value=cccccccc 03:52:03 SkyScan query 03:52:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:52:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:03 Parameters OK 03:52:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:03 Set A/D data flow result=40 03:52:03 Set A/D channel type result=40 03:52:03 Set A/D encoding result=40 03:52:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:03 Set channel filter=0.000000e+000 result=40 03:52:03 Config A/D Result=40 03:52:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:03 Get A/D filter: -9.255963e+061 result=40 03:52:03 Get A/D value=-858993460 result=40 03:52:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:03 Parameters OK 03:52:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:03 Set A/D data flow result=40 03:52:03 Set A/D channel type result=40 03:52:03 Set A/D encoding result=40 03:52:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:03 Set channel filter=0.000000e+000 result=40 03:52:03 Config A/D Result=40 03:52:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:03 Get A/D filter: -9.255963e+061 result=40 03:52:03 Get A/D value=-858993460 result=40 03:52:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:03 Aux= 03:52:03 Message to Camera, serial 103932 queued 03:52:40 Received message from Master: op=PointingHead serial=103945 03:52:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:52:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:52:41 Point started: ret=0 03:52:41 point_skyscan result=0 03:52:41 Check angles 03:52:41 SkyScan query 03:52:42 SkyScan query done: ret=0 az=134.64<-8976 ze=36.33<-9578 Statuses=0009 0009 03:52:42 Msec=0 True Az=134.64 Ze=36.33 Az status=0009 Ze status=0009 03:52:42 Check angles 03:52:42 SkyScan query 03:52:43 SkyScan query done: ret=0 az=117.165<-7811 ze=15.435<-10971 Statuses=0009 0009 03:52:43 Msec=750 True Az=117.165 Ze=15.435 Az status=0009 Ze status=0009 03:52:43 Check angles 03:52:43 SkyScan query 03:52:43 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.565<-12371 Statuses=0009 0009 03:52:43 Msec=1500 True Az=99.855 Ze=-5.565 Az status=0009 Ze status=0009 03:52:44 Check angles 03:52:44 SkyScan query 03:52:44 SkyScan query done: ret=0 az=82.005<-5467 ze=-26.955<-13797 Statuses=0009 0009 03:52:44 Msec=2250 True Az=82.005 Ze=-26.955 Az status=0009 Ze status=0009 03:52:44 Check angles 03:52:44 SkyScan query 03:52:45 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.565<-14571 Statuses=0009 0008 03:52:45 Msec=3000 True Az=64.485 Ze=-38.565 Az status=0009 Ze status=0008 03:52:45 Check angles 03:52:45 SkyScan query 03:52:46 SkyScan query done: ret=0 az=46.635<-3109 ze=-38.52<-14568 Statuses=0009 0008 03:52:46 Msec=3750 True Az=46.635 Ze=-38.52 Az status=0009 Ze status=0008 03:52:46 Check angles 03:52:46 SkyScan query 03:52:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:52:46 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:52:46 Message to Master queued w/err=0: serial=103945 error=0 03:52:51 Received message from Master: op=Filter serial=103946 03:52:51 Color wheel filter change from 0 to 0 03:52:51 FLIGetFilterPos err=0 currentPosition=0 03:52:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:51 Filter is already there-color wheel unchanged 03:52:52 Received message from Master: op=Shutter serial=103947 03:52:52 Shutter LASER close 03:52:52 Received message from Camera: op=State serial=103949 03:52:52 GetSingleValue result=40 Value=cccccccc 03:52:52 SkyScan query 03:52:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:52:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:52 Parameters OK 03:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:52 Set A/D data flow result=40 03:52:52 Set A/D channel type result=40 03:52:52 Set A/D encoding result=40 03:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:52 Set channel filter=0.000000e+000 result=40 03:52:52 Config A/D Result=40 03:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:52 Get A/D filter: -9.255963e+061 result=40 03:52:52 Get A/D value=-858993460 result=40 03:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:52 Parameters OK 03:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:52 Set A/D data flow result=40 03:52:52 Set A/D channel type result=40 03:52:52 Set A/D encoding result=40 03:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:52 Set channel filter=0.000000e+000 result=40 03:52:52 Config A/D Result=40 03:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:52 Get A/D filter: -9.255963e+061 result=40 03:52:52 Get A/D value=-858993460 result=40 03:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:52 Aux= 03:52:52 Message to Camera, serial 103949 queued 03:53:29 Received message from Master: op=PointingHead serial=103962 03:53:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:53:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:53:29 Point started: ret=0 03:53:29 point_skyscan result=0 03:53:30 Check angles 03:53:30 SkyScan query 03:53:31 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.805<-16587 Statuses=0009 0009 03:53:31 Msec=0 True Az=64.44 Ze=-68.805 Az status=0009 Ze status=0009 03:53:31 Check angles 03:53:31 SkyScan query 03:53:31 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.79<-17986 Statuses=0009 0009 03:53:31 Msec=750 True Az=81.795 Ze=-89.79 Az status=0009 Ze status=0009 03:53:32 Check angles 03:53:32 SkyScan query 03:53:32 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.745<-19383 Statuses=0009 0009 03:53:32 Msec=1500 True Az=99.39 Ze=-110.745 Az status=0009 Ze status=0009 03:53:32 Check angles 03:53:32 SkyScan query 03:53:33 SkyScan query done: ret=0 az=117.375<-7825 ze=-132.09<-20806 Statuses=0009 0009 03:53:33 Msec=2250 True Az=117.375 Ze=-132.09 Az status=0009 Ze status=0009 03:53:33 Check angles 03:53:33 SkyScan query 03:53:34 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 03:53:34 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 03:53:34 Check angles 03:53:34 SkyScan query 03:53:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:53:35 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:53:35 Message to Master queued w/err=0: serial=103962 error=0 03:53:40 Received message from Master: op=Filter serial=103963 03:53:40 Color wheel filter change from 0 to 0 03:53:40 FLIGetFilterPos err=0 currentPosition=0 03:53:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:40 Filter is already there-color wheel unchanged 03:53:40 Received message from Master: op=Shutter serial=103964 03:53:40 Shutter LASER close 03:53:40 Received message from Camera: op=State serial=103966 03:53:40 GetSingleValue result=40 Value=cccccccc 03:53:40 SkyScan query 03:53:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:53:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:40 Parameters OK 03:53:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:40 Set A/D data flow result=40 03:53:40 Set A/D channel type result=40 03:53:40 Set A/D encoding result=40 03:53:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:40 Set channel filter=0.000000e+000 result=40 03:53:40 Config A/D Result=40 03:53:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:40 Get A/D filter: -9.255963e+061 result=40 03:53:40 Get A/D value=-858993460 result=40 03:53:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:40 Parameters OK 03:53:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:40 Set A/D data flow result=40 03:53:40 Set A/D channel type result=40 03:53:40 Set A/D encoding result=40 03:53:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:40 Set channel filter=0.000000e+000 result=40 03:53:40 Config A/D Result=40 03:53:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:40 Get A/D filter: -9.255963e+061 result=40 03:53:40 Get A/D value=-858993460 result=40 03:53:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:40 Aux= 03:53:40 Message to Camera, serial 103966 queued 03:54:17 Received message from Master: op=PointingHead serial=103979 03:54:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:54:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:54:17 Point started: ret=0 03:54:17 point_skyscan result=0 03:54:18 Check angles 03:54:18 SkyScan query 03:54:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 03:54:19 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 03:54:19 Check angles 03:54:19 SkyScan query 03:54:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:54:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:54:20 Message to Master queued w/err=0: serial=103979 error=0 03:54:25 Received message from Master: op=Filter serial=103980 03:54:25 Color wheel filter change from 0 to 0 03:54:25 FLIGetFilterPos err=0 currentPosition=0 03:54:25 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:25 Filter is already there-color wheel unchanged 03:54:25 Received message from Master: op=Shutter serial=103981 03:54:25 Shutter LASER open 03:54:25 Received message from Camera: op=State serial=103983 03:54:25 GetSingleValue result=40 Value=cccccccc 03:54:25 SkyScan query 03:54:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:25 Parameters OK 03:54:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:25 Set A/D data flow result=40 03:54:25 Set A/D channel type result=40 03:54:25 Set A/D encoding result=40 03:54:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:25 Set channel filter=0.000000e+000 result=40 03:54:25 Config A/D Result=40 03:54:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:25 Get A/D filter: -9.255963e+061 result=40 03:54:25 Get A/D value=-858993460 result=40 03:54:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:25 Parameters OK 03:54:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:25 Set A/D data flow result=40 03:54:25 Set A/D channel type result=40 03:54:25 Set A/D encoding result=40 03:54:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:25 Set channel filter=0.000000e+000 result=40 03:54:25 Config A/D Result=40 03:54:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:25 Get A/D filter: -9.255963e+061 result=40 03:54:25 Get A/D value=-858993460 result=40 03:54:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:25 Aux= 03:54:25 Message to Camera, serial 103983 queued 03:54:34 Received message from Master: op=Shutter serial=103993 03:54:34 Shutter LASER close 03:54:35 Received message from Master: op=PointingHead serial=103997 03:54:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:54:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:54:35 Point started: ret=0 03:54:35 point_skyscan result=0 03:54:36 Check angles 03:54:36 SkyScan query 03:54:36 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.085<-21539 Statuses=0009 0009 03:54:36 Msec=0 True Az=136.17 Ze=-143.085 Az status=0009 Ze status=0009 03:54:36 Check angles 03:54:36 SkyScan query 03:54:37 SkyScan query done: ret=0 az=153.69<-10246 ze=-122.115<-20141 Statuses=0009 0009 03:54:37 Msec=750 True Az=153.69 Ze=-122.115 Az status=0009 Ze status=0009 03:54:37 Check angles 03:54:37 SkyScan query 03:54:38 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.68<-18712 Statuses=0009 0009 03:54:38 Msec=1500 True Az=171.555 Ze=-100.68 Az status=0009 Ze status=0009 03:54:38 Check angles 03:54:38 SkyScan query 03:54:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.8<-17320 Statuses=0008 0009 03:54:39 Msec=2250 True Az=176.01 Ze=-79.8 Az status=0008 Ze status=0009 03:54:39 Check angles 03:54:39 SkyScan query 03:54:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.8<-15920 Statuses=0008 0009 03:54:39 Msec=3000 True Az=176.01 Ze=-58.8 Az status=0008 Ze status=0009 03:54:39 Check angles 03:54:39 SkyScan query 03:54:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 03:54:40 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 03:54:40 Message to Master queued w/err=0: serial=103997 error=0 03:54:45 Received message from Master: op=Filter serial=103998 03:54:45 Color wheel filter change from 0 to 0 03:54:45 FLIGetFilterPos err=0 currentPosition=0 03:54:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:45 Filter is already there-color wheel unchanged 03:54:45 Received message from Master: op=Shutter serial=103999 03:54:45 Shutter LASER close 03:54:45 Received message from Camera: op=State serial=104001 03:54:45 GetSingleValue result=40 Value=cccccccc 03:54:45 SkyScan query 03:54:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:54:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:46 Parameters OK 03:54:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:46 Set A/D data flow result=40 03:54:46 Set A/D channel type result=40 03:54:46 Set A/D encoding result=40 03:54:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:46 Set channel filter=0.000000e+000 result=40 03:54:46 Config A/D Result=40 03:54:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:46 Get A/D filter: -9.255963e+061 result=40 03:54:46 Get A/D value=-858993460 result=40 03:54:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:46 Parameters OK 03:54:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:46 Set A/D data flow result=40 03:54:46 Set A/D channel type result=40 03:54:46 Set A/D encoding result=40 03:54:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:46 Set channel filter=0.000000e+000 result=40 03:54:46 Config A/D Result=40 03:54:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:46 Get A/D filter: -9.255963e+061 result=40 03:54:46 Get A/D value=-858993460 result=40 03:54:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:46 Aux= 03:54:46 Message to Camera, serial 104001 queued 03:55:23 Received message from Master: op=PointingHead serial=104014 03:55:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:55:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:55:23 Point started: ret=0 03:55:23 point_skyscan result=0 03:55:24 Check angles 03:55:24 SkyScan query 03:55:24 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.75<-13450 Statuses=0009 0009 03:55:24 Msec=0 True Az=152.985 Ze=-21.75 Az status=0009 Ze status=0009 03:55:25 Check angles 03:55:25 SkyScan query 03:55:25 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.75<-12050 Statuses=0009 0009 03:55:25 Msec=750 True Az=135.45 Ze=-0.75 Az status=0009 Ze status=0009 03:55:25 Check angles 03:55:25 SkyScan query 03:55:26 SkyScan query done: ret=0 az=117.975<-7865 ze=20.175<-10655 Statuses=0009 0009 03:55:26 Msec=1500 True Az=117.975 Ze=20.175 Az status=0009 Ze status=0009 03:55:26 Check angles 03:55:26 SkyScan query 03:55:27 SkyScan query done: ret=0 az=100.23<-6682 ze=41.595<-9227 Statuses=0009 0009 03:55:27 Msec=2250 True Az=100.23 Ze=41.595 Az status=0009 Ze status=0009 03:55:27 Check angles 03:55:27 SkyScan query 03:55:28 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 03:55:28 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 03:55:28 Check angles 03:55:28 SkyScan query 03:55:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:55:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:55:28 Message to Master queued w/err=0: serial=104014 error=0 03:55:33 Received message from Master: op=Filter serial=104015 03:55:33 Color wheel filter change from 0 to 0 03:55:33 FLIGetFilterPos err=0 currentPosition=0 03:55:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:33 Filter is already there-color wheel unchanged 03:55:33 Received message from Master: op=Shutter serial=104016 03:55:33 Shutter LASER close 03:55:33 Received message from Camera: op=State serial=104018 03:55:33 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-13 03:55:33] 03:55:33 SkyScan query 03:55:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:55:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:34 Parameters OK 03:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:34 Set A/D data flow result=40 03:55:34 Set A/D channel type result=40 03:55:34 Set A/D encoding result=40 03:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:34 Set channel filter=0.000000e+000 result=40 03:55:34 Config A/D Result=40 03:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:34 Get A/D filter: -9.255963e+061 result=40 03:55:34 Get A/D value=-858993460 result=40 03:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:34 Parameters OK 03:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:34 Set A/D data flow result=40 03:55:34 Set A/D channel type result=40 03:55:34 Set A/D encoding result=40 03:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:34 Set channel filter=0.000000e+000 result=40 03:55:34 Config A/D Result=40 03:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:34 Get A/D filter: -9.255963e+061 result=40 03:55:34 Get A/D value=-858993460 result=40 03:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:34 Aux= 03:55:34 Message to Camera, serial 104018 queued [UTC 2018-12-13 03:55:52] 03:56:11 Received message from Master: op=PointingHead serial=104031 03:56:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:56:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:56:11 Point started: ret=0 03:56:11 point_skyscan result=0 03:56:12 Check angles 03:56:12 SkyScan query 03:56:13 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 03:56:13 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 03:56:13 Check angles 03:56:13 SkyScan query 03:56:13 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 03:56:13 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 03:56:14 Check angles 03:56:14 SkyScan query 03:56:14 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 03:56:14 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 03:56:14 Check angles 03:56:14 SkyScan query 03:56:15 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 03:56:15 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 03:56:15 Check angles 03:56:15 SkyScan query 03:56:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:56:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:56:16 Check angles 03:56:16 SkyScan query 03:56:16 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:56:16 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:56:16 Message to Master queued w/err=0: serial=104031 error=0 03:56:21 Received message from Master: op=Filter serial=104032 03:56:21 Color wheel filter change from 0 to 0 03:56:21 FLIGetFilterPos err=0 currentPosition=0 03:56:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:21 Filter is already there-color wheel unchanged 03:56:22 Received message from Master: op=Shutter serial=104033 03:56:22 Shutter LASER close 03:56:22 Received message from Camera: op=State serial=104035 03:56:22 GetSingleValue result=40 Value=cccccccc 03:56:22 SkyScan query 03:56:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:56:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:22 Parameters OK 03:56:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:22 Set A/D data flow result=40 03:56:22 Set A/D channel type result=40 03:56:22 Set A/D encoding result=40 03:56:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:22 Set channel filter=0.000000e+000 result=40 03:56:22 Config A/D Result=40 03:56:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:22 Get A/D filter: -9.255963e+061 result=40 03:56:22 Get A/D value=-858993460 result=40 03:56:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:22 Parameters OK 03:56:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:22 Set A/D data flow result=40 03:56:22 Set A/D channel type result=40 03:56:22 Set A/D encoding result=40 03:56:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:22 Set channel filter=0.000000e+000 result=40 03:56:22 Config A/D Result=40 03:56:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:22 Get A/D filter: -9.255963e+061 result=40 03:56:22 Get A/D value=-858993460 result=40 03:56:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:22 Aux= 03:56:22 Message to Camera, serial 104035 queued 03:56:59 Received message from Master: op=PointingHead serial=104048 03:56:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:56:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:56:59 Point started: ret=0 03:56:59 point_skyscan result=0 03:57:00 Check angles 03:57:00 SkyScan query 03:57:01 SkyScan query done: ret=0 az=152.94<-10196 ze=8.625<-11425 Statuses=0009 0009 03:57:01 Msec=0 True Az=152.94 Ze=8.625 Az status=0009 Ze status=0009 03:57:01 Check angles 03:57:01 SkyScan query 03:57:01 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.315<-12821 Statuses=0009 0009 03:57:01 Msec=750 True Az=135.375 Ze=-12.315 Az status=0009 Ze status=0009 03:57:02 Check angles 03:57:02 SkyScan query 03:57:02 SkyScan query done: ret=0 az=117.945<-7863 ze=-33.255<-14217 Statuses=0009 0009 03:57:02 Msec=1500 True Az=117.945 Ze=-33.255 Az status=0009 Ze status=0009 03:57:02 Check angles 03:57:02 SkyScan query 03:57:03 SkyScan query done: ret=0 az=100.545<-6703 ze=-51.525<-15435 Statuses=0009 0009 03:57:03 Msec=2250 True Az=100.545 Ze=-51.525 Az status=0009 Ze status=0009 03:57:03 Check angles 03:57:03 SkyScan query 03:57:04 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 03:57:04 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 03:57:04 Check angles 03:57:04 SkyScan query 03:57:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:57:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:57:04 Message to Master queued w/err=0: serial=104048 error=0 03:57:09 Received message from Master: op=Filter serial=104049 03:57:09 Color wheel filter change from 0 to 0 03:57:09 FLIGetFilterPos err=0 currentPosition=0 03:57:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:09 Filter is already there-color wheel unchanged 03:57:10 Received message from Master: op=Shutter serial=104050 03:57:10 Shutter LASER close 03:57:10 Received message from Camera: op=State serial=104052 03:57:10 GetSingleValue result=40 Value=cccccccc 03:57:10 SkyScan query 03:57:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:57:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:10 Parameters OK 03:57:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:10 Set A/D data flow result=40 03:57:10 Set A/D channel type result=40 03:57:10 Set A/D encoding result=40 03:57:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:10 Set channel filter=0.000000e+000 result=40 03:57:10 Config A/D Result=40 03:57:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:10 Get A/D filter: -9.255963e+061 result=40 03:57:10 Get A/D value=-858993460 result=40 03:57:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:10 Parameters OK 03:57:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:10 Set A/D data flow result=40 03:57:10 Set A/D channel type result=40 03:57:10 Set A/D encoding result=40 03:57:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:10 Set channel filter=0.000000e+000 result=40 03:57:10 Config A/D Result=40 03:57:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:10 Get A/D filter: -9.255963e+061 result=40 03:57:10 Get A/D value=-858993460 result=40 03:57:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:10 Aux= 03:57:10 Message to Camera, serial 104052 queued 03:57:47 Received message from Master: op=PointingHead serial=104065 03:57:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:57:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:57:47 Point started: ret=0 03:57:47 point_skyscan result=0 03:57:48 Check angles 03:57:48 SkyScan query 03:57:49 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.39<-17426 Statuses=0009 0009 03:57:49 Msec=0 True Az=109.14 Ze=-81.39 Az status=0009 Ze status=0009 03:57:49 Check angles 03:57:49 SkyScan query 03:57:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.81<-18854 Statuses=0008 0009 03:57:49 Msec=750 True Az=112.995 Ze=-102.81 Az status=0008 Ze status=0009 03:57:50 Check angles 03:57:50 SkyScan query 03:57:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 03:57:50 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 03:57:50 Check angles 03:57:50 SkyScan query 03:57:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 03:57:51 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 03:57:51 Check angles 03:57:51 SkyScan query 03:57:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 03:57:52 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 03:57:52 Check angles 03:57:52 SkyScan query 03:57:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:57:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:57:52 Message to Master queued w/err=0: serial=104065 error=0 03:57:57 Received message from Master: op=Filter serial=104066 03:57:57 Color wheel filter change from 0 to 0 03:57:57 FLIGetFilterPos err=0 currentPosition=0 03:57:57 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:57 Filter is already there-color wheel unchanged 03:57:58 Received message from Master: op=Shutter serial=104067 03:57:58 Shutter LASER open 03:57:58 Received message from Camera: op=State serial=104069 03:57:58 GetSingleValue result=40 Value=cccccccc 03:57:58 SkyScan query 03:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:57:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:58 Parameters OK 03:57:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:58 Set A/D data flow result=40 03:57:58 Set A/D channel type result=40 03:57:58 Set A/D encoding result=40 03:57:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:58 Set channel filter=0.000000e+000 result=40 03:57:58 Config A/D Result=40 03:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:58 Get A/D filter: -9.255963e+061 result=40 03:57:58 Get A/D value=-858993460 result=40 03:57:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:58 Parameters OK 03:57:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:58 Set A/D data flow result=40 03:57:58 Set A/D channel type result=40 03:57:58 Set A/D encoding result=40 03:57:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:58 Set channel filter=0.000000e+000 result=40 03:57:58 Config A/D Result=40 03:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:58 Get A/D filter: -9.255963e+061 result=40 03:57:58 Get A/D value=-858993460 result=40 03:57:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:58 Aux= 03:57:58 Message to Camera, serial 104069 queued 03:58:07 Received message from Master: op=Shutter serial=104079 03:58:07 Shutter LASER close 03:58:07 Received message from Master: op=PointingHead serial=104083 03:58:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:58:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:58:08 Point started: ret=0 03:58:08 point_skyscan result=0 03:58:08 Check angles 03:58:08 SkyScan query 03:58:09 SkyScan query done: ret=0 az=89.88<-5992 ze=157.29<-1514 Statuses=0009 0009 03:58:09 Msec=0 True Az=89.88 Ze=157.29 Az status=0009 Ze status=0009 03:58:09 Check angles 03:58:09 SkyScan query 03:58:10 SkyScan query done: ret=0 az=72.045<-4803 ze=135.885<-2941 Statuses=0009 0009 03:58:10 Msec=750 True Az=72.045 Ze=135.885 Az status=0009 Ze status=0009 03:58:10 Check angles 03:58:10 SkyScan query 03:58:10 SkyScan query done: ret=0 az=54.78<-3652 ze=114.945<-4337 Statuses=0009 0009 03:58:10 Msec=1500 True Az=54.78 Ze=114.945 Az status=0009 Ze status=0009 03:58:11 Check angles 03:58:11 SkyScan query 03:58:11 SkyScan query done: ret=0 az=40.875<-2725 ze=93.96<-5736 Statuses=0009 0009 03:58:11 Msec=2250 True Az=40.875 Ze=93.96 Az status=0009 Ze status=0009 03:58:11 Check angles 03:58:11 SkyScan query 03:58:12 SkyScan query done: ret=0 az=40.995<-2733 ze=73.02<-7132 Statuses=0008 0009 03:58:12 Msec=3000 True Az=40.995 Ze=73.02 Az status=0008 Ze status=0009 03:58:12 Check angles 03:58:12 SkyScan query 03:58:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 03:58:13 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 03:58:13 Check angles 03:58:13 SkyScan query 03:58:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:58:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:58:13 Message to Master queued w/err=0: serial=104083 error=0 03:58:18 Received message from Master: op=Filter serial=104084 03:58:18 Color wheel filter change from 0 to 0 03:58:18 FLIGetFilterPos err=0 currentPosition=0 03:58:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:18 Filter is already there-color wheel unchanged 03:58:19 Received message from Master: op=Shutter serial=104085 03:58:19 Shutter LASER close 03:58:19 Received message from Camera: op=State serial=104087 03:58:19 GetSingleValue result=40 Value=cccccccc 03:58:19 SkyScan query 03:58:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:58:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:19 Parameters OK 03:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:19 Set A/D data flow result=40 03:58:19 Set A/D channel type result=40 03:58:19 Set A/D encoding result=40 03:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:19 Set channel filter=0.000000e+000 result=40 03:58:19 Config A/D Result=40 03:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:19 Get A/D filter: -9.255963e+061 result=40 03:58:19 Get A/D value=-858993460 result=40 03:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:19 Parameters OK 03:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:19 Set A/D data flow result=40 03:58:19 Set A/D channel type result=40 03:58:19 Set A/D encoding result=40 03:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:19 Set channel filter=0.000000e+000 result=40 03:58:19 Config A/D Result=40 03:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:19 Get A/D filter: -9.255963e+061 result=40 03:58:19 Get A/D value=-858993460 result=40 03:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:19 Aux= 03:58:19 Message to Camera, serial 104087 queued 03:58:56 Received message from Master: op=PointingHead serial=104100 03:58:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:58:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:58:57 Point started: ret=0 03:58:57 point_skyscan result=0 03:58:57 Check angles 03:58:57 SkyScan query 03:58:58 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 03:58:58 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 03:58:58 Check angles 03:58:58 SkyScan query 03:58:59 SkyScan query done: ret=0 az=81.6<-5440 ze=66.495<-7567 Statuses=0009 0008 03:58:59 Msec=750 True Az=81.6 Ze=66.495 Az status=0009 Ze status=0008 03:58:59 Check angles 03:58:59 SkyScan query 03:58:59 SkyScan query done: ret=0 az=99.675<-6645 ze=66.495<-7567 Statuses=0009 0008 03:58:59 Msec=1500 True Az=99.675 Ze=66.495 Az status=0009 Ze status=0008 03:59:00 Check angles 03:59:00 SkyScan query 03:59:00 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 03:59:00 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 03:59:00 Check angles 03:59:00 SkyScan query 03:59:01 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 03:59:01 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 03:59:01 Check angles 03:59:01 SkyScan query 03:59:02 SkyScan query done: ret=0 az=152.415<-10161 ze=66.495<-7567 Statuses=0009 0008 03:59:02 Msec=3750 True Az=152.415 Ze=66.495 Az status=0009 Ze status=0008 03:59:02 Check angles 03:59:02 SkyScan query 03:59:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:59:02 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:59:02 Message to Master queued w/err=0: serial=104100 error=0 03:59:07 Received message from Master: op=Filter serial=104101 03:59:07 Color wheel filter change from 0 to 0 03:59:07 FLIGetFilterPos err=0 currentPosition=0 03:59:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:07 Filter is already there-color wheel unchanged 03:59:08 Received message from Master: op=Shutter serial=104102 03:59:08 Shutter LASER close 03:59:08 Received message from Camera: op=State serial=104104 03:59:08 GetSingleValue result=40 Value=cccccccc 03:59:08 SkyScan query 03:59:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:59:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:08 Parameters OK 03:59:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:08 Set A/D data flow result=40 03:59:08 Set A/D channel type result=40 03:59:08 Set A/D encoding result=40 03:59:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:08 Set channel filter=0.000000e+000 result=40 03:59:08 Config A/D Result=40 03:59:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:08 Get A/D filter: -9.255963e+061 result=40 03:59:08 Get A/D value=-858993460 result=40 03:59:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:08 Parameters OK 03:59:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:08 Set A/D data flow result=40 03:59:08 Set A/D channel type result=40 03:59:08 Set A/D encoding result=40 03:59:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:08 Set channel filter=0.000000e+000 result=40 03:59:08 Config A/D Result=40 03:59:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:08 Get A/D filter: -9.255963e+061 result=40 03:59:08 Get A/D value=-858993460 result=40 03:59:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:08 Aux= 03:59:08 Message to Camera, serial 104104 queued 03:59:45 Received message from Master: op=PointingHead serial=104117 03:59:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:59:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:59:45 Point started: ret=0 03:59:45 point_skyscan result=0 03:59:46 Check angles 03:59:46 SkyScan query 03:59:47 SkyScan query done: ret=0 az=134.82<-8988 ze=36.57<-9562 Statuses=0009 0009 03:59:47 Msec=0 True Az=134.82 Ze=36.57 Az status=0009 Ze status=0009 03:59:47 Check angles 03:59:47 SkyScan query 03:59:48 SkyScan query done: ret=0 az=117<-7800 ze=15.225<-10985 Statuses=0009 0009 03:59:48 Msec=750 True Az=117 Ze=15.225 Az status=0009 Ze status=0009 03:59:48 Check angles 03:59:48 SkyScan query 03:59:48 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.76<-12384 Statuses=0009 0009 03:59:48 Msec=1500 True Az=99.66 Ze=-5.76 Az status=0009 Ze status=0009 03:59:49 Check angles 03:59:49 SkyScan query 03:59:49 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.7<-13780 Statuses=0009 0009 03:59:49 Msec=2250 True Az=82.155 Ze=-26.7 Az status=0009 Ze status=0009 03:59:49 Check angles 03:59:49 SkyScan query 03:59:50 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.565<-14571 Statuses=0009 0008 03:59:50 Msec=3000 True Az=64.65 Ze=-38.565 Az status=0009 Ze status=0008 03:59:50 Check angles 03:59:50 SkyScan query 03:59:51 SkyScan query done: ret=0 az=46.86<-3124 ze=-38.535<-14569 Statuses=0009 0008 03:59:51 Msec=3750 True Az=46.86 Ze=-38.535 Az status=0009 Ze status=0008 03:59:51 Check angles 03:59:51 SkyScan query 03:59:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:59:51 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:59:51 Message to Master queued w/err=0: serial=104117 error=0 03:59:56 Received message from Master: op=Filter serial=104118 03:59:56 Color wheel filter change from 0 to 0 03:59:56 FLIGetFilterPos err=0 currentPosition=0 03:59:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:56 Filter is already there-color wheel unchanged 03:59:57 Received message from Master: op=Shutter serial=104119 03:59:57 Shutter LASER close 03:59:57 Received message from Camera: op=State serial=104121 03:59:57 GetSingleValue result=40 Value=cccccccc 03:59:57 SkyScan query 03:59:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:59:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:57 Parameters OK 03:59:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:57 Set A/D data flow result=40 03:59:57 Set A/D channel type result=40 03:59:57 Set A/D encoding result=40 03:59:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:57 Set channel filter=0.000000e+000 result=40 03:59:57 Config A/D Result=40 03:59:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:57 Get A/D filter: -9.255963e+061 result=40 03:59:57 Get A/D value=-858993460 result=40 03:59:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:57 Parameters OK 03:59:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:57 Set A/D data flow result=40 03:59:57 Set A/D channel type result=40 03:59:57 Set A/D encoding result=40 03:59:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:57 Set channel filter=0.000000e+000 result=40 03:59:57 Config A/D Result=40 03:59:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:57 Get A/D filter: -9.255963e+061 result=40 03:59:57 Get A/D value=-858993460 result=40 03:59:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:57 Aux= 03:59:57 Message to Camera, serial 104121 queued 04:00:34 Received message from Master: op=PointingHead serial=104134 04:00:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:00:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:00:34 Point started: ret=0 04:00:34 point_skyscan result=0 04:00:35 Check angles 04:00:35 SkyScan query 04:00:36 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.22<-16548 Statuses=0009 0009 04:00:36 Msec=0 True Az=63.945 Ze=-68.22 Az status=0009 Ze status=0009 04:00:36 Check angles 04:00:36 SkyScan query 04:00:36 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.22<-17948 Statuses=0009 0009 04:00:36 Msec=750 True Az=81.315 Ze=-89.22 Az status=0009 Ze status=0009 04:00:37 Check angles 04:00:37 SkyScan query 04:00:37 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.145<-19343 Statuses=0009 0009 04:00:37 Msec=1500 True Az=98.865 Ze=-110.145 Az status=0009 Ze status=0009 04:00:37 Check angles 04:00:37 SkyScan query 04:00:38 SkyScan query done: ret=0 az=116.4<-7760 ze=-131.175<-20745 Statuses=0009 0009 04:00:38 Msec=2250 True Az=116.4 Ze=-131.175 Az status=0009 Ze status=0009 04:00:38 Check angles 04:00:38 SkyScan query 04:00:39 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 04:00:39 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 04:00:39 Check angles 04:00:39 SkyScan query 04:00:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:00:39 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:00:39 Message to Master queued w/err=0: serial=104134 error=0 04:00:44 Received message from Master: op=Filter serial=104135 04:00:44 Color wheel filter change from 0 to 0 04:00:44 FLIGetFilterPos err=0 currentPosition=0 04:00:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:44 Filter is already there-color wheel unchanged 04:00:45 Received message from Master: op=Shutter serial=104136 04:00:45 Shutter LASER close 04:00:45 Received message from Camera: op=State serial=104138 04:00:45 GetSingleValue result=40 Value=cccccccc 04:00:45 SkyScan query 04:00:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:00:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:45 Parameters OK 04:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:45 Set A/D data flow result=40 04:00:45 Set A/D channel type result=40 04:00:45 Set A/D encoding result=40 04:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:45 Set channel filter=0.000000e+000 result=40 04:00:45 Config A/D Result=40 04:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:45 Get A/D filter: -9.255963e+061 result=40 04:00:45 Get A/D value=-858993460 result=40 04:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:45 Parameters OK 04:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:45 Set A/D data flow result=40 04:00:45 Set A/D channel type result=40 04:00:45 Set A/D encoding result=40 04:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:45 Set channel filter=0.000000e+000 result=40 04:00:45 Config A/D Result=40 04:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:45 Get A/D filter: -9.255963e+061 result=40 04:00:45 Get A/D value=-858993460 result=40 04:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:45 Aux= 04:00:45 Message to Camera, serial 104138 queued 04:01:22 Received message from Master: op=PointingHead serial=104151 04:01:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:01:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:01:22 Point started: ret=0 04:01:22 point_skyscan result=0 04:01:23 Check angles 04:01:23 SkyScan query 04:01:24 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 04:01:24 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 04:01:24 Check angles 04:01:24 SkyScan query 04:01:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:01:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:01:24 Message to Master queued w/err=0: serial=104151 error=0 04:01:29 Received message from Master: op=Filter serial=104152 04:01:29 Color wheel filter change from 0 to 0 04:01:29 FLIGetFilterPos err=0 currentPosition=0 04:01:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:29 Filter is already there-color wheel unchanged 04:01:30 Received message from Master: op=Shutter serial=104153 04:01:30 Shutter LASER open 04:01:30 Received message from Camera: op=State serial=104155 04:01:30 GetSingleValue result=40 Value=cccccccc 04:01:30 SkyScan query 04:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:01:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:30 Parameters OK 04:01:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:30 Set A/D data flow result=40 04:01:30 Set A/D channel type result=40 04:01:30 Set A/D encoding result=40 04:01:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:30 Set channel filter=0.000000e+000 result=40 04:01:30 Config A/D Result=40 04:01:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:30 Get A/D filter: -9.255963e+061 result=40 04:01:30 Get A/D value=-858993460 result=40 04:01:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:30 Parameters OK 04:01:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:30 Set A/D data flow result=40 04:01:30 Set A/D channel type result=40 04:01:30 Set A/D encoding result=40 04:01:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:30 Set channel filter=0.000000e+000 result=40 04:01:30 Config A/D Result=40 04:01:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:30 Get A/D filter: -9.255963e+061 result=40 04:01:30 Get A/D value=-858993460 result=40 04:01:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:30 Aux= 04:01:30 Message to Camera, serial 104155 queued 04:01:39 Received message from Master: op=Shutter serial=104165 04:01:39 Shutter LASER close 04:01:39 Received message from Master: op=PointingHead serial=104169 04:01:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:01:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:01:40 Point started: ret=0 04:01:40 point_skyscan result=0 04:01:40 Check angles 04:01:40 SkyScan query 04:01:41 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.8<-21520 Statuses=0009 0009 04:01:41 Msec=0 True Az=136.38 Ze=-142.8 Az status=0009 Ze status=0009 04:01:41 Check angles 04:01:41 SkyScan query 04:01:42 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.845<-20123 Statuses=0009 0009 04:01:42 Msec=750 True Az=153.81 Ze=-121.845 Az status=0009 Ze status=0009 04:01:42 Check angles 04:01:42 SkyScan query 04:01:43 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.89<-18726 Statuses=0009 0009 04:01:43 Msec=1500 True Az=171.27 Ze=-100.89 Az status=0009 Ze status=0009 04:01:43 Check angles 04:01:43 SkyScan query 04:01:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.98<-17332 Statuses=0008 0009 04:01:43 Msec=2250 True Az=176.01 Ze=-79.98 Az status=0008 Ze status=0009 04:01:43 Check angles 04:01:43 SkyScan query 04:01:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.995<-15933 Statuses=0008 0009 04:01:44 Msec=3000 True Az=176.01 Ze=-58.995 Az status=0008 Ze status=0009 04:01:44 Check angles 04:01:44 SkyScan query 04:01:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:01:45 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:01:45 Message to Master queued w/err=0: serial=104169 error=0 04:01:50 Received message from Master: op=Filter serial=104170 04:01:50 Color wheel filter change from 0 to 0 04:01:50 FLIGetFilterPos err=0 currentPosition=0 04:01:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:50 Filter is already there-color wheel unchanged 04:01:50 Received message from Master: op=Shutter serial=104171 04:01:50 Shutter LASER close 04:01:50 Received message from Camera: op=State serial=104173 04:01:50 GetSingleValue result=40 Value=cccccccc 04:01:50 SkyScan query 04:01:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:01:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:51 Parameters OK 04:01:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:51 Set A/D data flow result=40 04:01:51 Set A/D channel type result=40 04:01:51 Set A/D encoding result=40 04:01:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:51 Set channel filter=0.000000e+000 result=40 04:01:51 Config A/D Result=40 04:01:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:51 Get A/D filter: -9.255963e+061 result=40 04:01:51 Get A/D value=-858993460 result=40 04:01:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:51 Parameters OK 04:01:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:51 Set A/D data flow result=40 04:01:51 Set A/D channel type result=40 04:01:51 Set A/D encoding result=40 04:01:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:51 Set channel filter=0.000000e+000 result=40 04:01:51 Config A/D Result=40 04:01:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:51 Get A/D filter: -9.255963e+061 result=40 04:01:51 Get A/D value=-858993460 result=40 04:01:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:51 Aux= 04:01:51 Message to Camera, serial 104173 queued 04:02:28 Received message from Master: op=PointingHead serial=104186 04:02:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:02:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:02:28 Point started: ret=0 04:02:28 point_skyscan result=0 04:02:29 Check angles 04:02:29 SkyScan query 04:02:29 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.225<-13415 Statuses=0009 0009 04:02:29 Msec=0 True Az=152.595 Ze=-21.225 Az status=0009 Ze status=0009 04:02:29 Check angles 04:02:29 SkyScan query 04:02:30 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.255<-12017 Statuses=0009 0009 04:02:30 Msec=750 True Az=135.12 Ze=-0.255 Az status=0009 Ze status=0009 04:02:30 Check angles 04:02:30 SkyScan query 04:02:31 SkyScan query done: ret=0 az=117.555<-7837 ze=20.67<-10622 Statuses=0009 0009 04:02:31 Msec=1500 True Az=117.555 Ze=20.67 Az status=0009 Ze status=0009 04:02:31 Check angles 04:02:31 SkyScan query 04:02:32 SkyScan query done: ret=0 az=100.215<-6681 ze=41.655<-9223 Statuses=0009 0009 04:02:32 Msec=2250 True Az=100.215 Ze=41.655 Az status=0009 Ze status=0009 04:02:32 Check angles 04:02:32 SkyScan query 04:02:32 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 04:02:32 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 04:02:32 Check angles 04:02:32 SkyScan query 04:02:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:02:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:02:33 Message to Master queued w/err=0: serial=104186 error=0 04:02:38 Received message from Master: op=Filter serial=104187 04:02:38 Color wheel filter change from 0 to 0 04:02:38 FLIGetFilterPos err=0 currentPosition=0 04:02:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:38 Filter is already there-color wheel unchanged 04:02:38 Received message from Master: op=Shutter serial=104188 04:02:38 Shutter LASER close 04:02:38 Received message from Camera: op=State serial=104190 04:02:38 GetSingleValue result=40 Value=cccccccc 04:02:38 SkyScan query 04:02:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:02:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:39 Parameters OK 04:02:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:39 Set A/D data flow result=40 04:02:39 Set A/D channel type result=40 04:02:39 Set A/D encoding result=40 04:02:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:39 Set channel filter=0.000000e+000 result=40 04:02:39 Config A/D Result=40 04:02:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:39 Get A/D filter: -9.255963e+061 result=40 04:02:39 Get A/D value=-858993460 result=40 04:02:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:39 Parameters OK 04:02:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:39 Set A/D data flow result=40 04:02:39 Set A/D channel type result=40 04:02:39 Set A/D encoding result=40 04:02:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:39 Set channel filter=0.000000e+000 result=40 04:02:39 Config A/D Result=40 04:02:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:39 Get A/D filter: -9.255963e+061 result=40 04:02:39 Get A/D value=-858993460 result=40 04:02:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:39 Aux= 04:02:39 Message to Camera, serial 104190 queued 04:03:16 Received message from Master: op=PointingHead serial=104203 04:03:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:03:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:03:16 Point started: ret=0 04:03:16 point_skyscan result=0 04:03:17 Check angles 04:03:17 SkyScan query 04:03:17 SkyScan query done: ret=0 az=109.26<-7284 ze=38.49<-9434 Statuses=0009 0008 04:03:17 Msec=0 True Az=109.26 Ze=38.49 Az status=0009 Ze status=0008 04:03:18 Check angles 04:03:18 SkyScan query 04:03:18 SkyScan query done: ret=0 az=127.065<-8471 ze=38.505<-9433 Statuses=0009 0008 04:03:18 Msec=750 True Az=127.065 Ze=38.505 Az status=0009 Ze status=0008 04:03:18 Check angles 04:03:18 SkyScan query 04:03:19 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 04:03:19 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 04:03:19 Check angles 04:03:19 SkyScan query 04:03:20 SkyScan query done: ret=0 az=162.03<-10802 ze=38.505<-9433 Statuses=0009 0008 04:03:20 Msec=2250 True Az=162.03 Ze=38.505 Az status=0009 Ze status=0008 04:03:20 Check angles 04:03:20 SkyScan query 04:03:20 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:03:20 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:03:21 Check angles 04:03:21 SkyScan query 04:03:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:03:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:03:21 Message to Master queued w/err=0: serial=104203 error=0 04:03:26 Received message from Master: op=Filter serial=104204 04:03:26 Color wheel filter change from 0 to 0 04:03:26 FLIGetFilterPos err=0 currentPosition=0 04:03:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:26 Filter is already there-color wheel unchanged 04:03:26 Received message from Master: op=Shutter serial=104205 04:03:26 Shutter LASER close 04:03:26 Received message from Camera: op=State serial=104207 04:03:26 GetSingleValue result=40 Value=cccccccc 04:03:26 SkyScan query 04:03:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:03:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:27 Parameters OK 04:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:27 Set A/D data flow result=40 04:03:27 Set A/D channel type result=40 04:03:27 Set A/D encoding result=40 04:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:27 Set channel filter=0.000000e+000 result=40 04:03:27 Config A/D Result=40 04:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:27 Get A/D filter: -9.255963e+061 result=40 04:03:27 Get A/D value=-858993460 result=40 04:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:27 Parameters OK 04:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:27 Set A/D data flow result=40 04:03:27 Set A/D channel type result=40 04:03:27 Set A/D encoding result=40 04:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:27 Set channel filter=0.000000e+000 result=40 04:03:27 Config A/D Result=40 04:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:27 Get A/D filter: -9.255963e+061 result=40 04:03:27 Get A/D value=-858993460 result=40 04:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:27 Aux= 04:03:27 Message to Camera, serial 104207 queued 04:04:04 Received message from Master: op=PointingHead serial=104220 04:04:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:04:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:04:04 Point started: ret=0 04:04:04 point_skyscan result=0 04:04:05 Check angles 04:04:05 SkyScan query 04:04:05 SkyScan query done: ret=0 az=152.76<-10184 ze=8.445<-11437 Statuses=0009 0009 04:04:05 Msec=0 True Az=152.76 Ze=8.445 Az status=0009 Ze status=0009 04:04:06 Check angles 04:04:06 SkyScan query 04:04:06 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.48<-12832 Statuses=0009 0009 04:04:06 Msec=750 True Az=135.33 Ze=-12.48 Az status=0009 Ze status=0009 04:04:06 Check angles 04:04:06 SkyScan query 04:04:07 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.42<-14228 Statuses=0009 0009 04:04:07 Msec=1500 True Az=117.765 Ze=-33.42 Az status=0009 Ze status=0009 04:04:07 Check angles 04:04:07 SkyScan query 04:04:08 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.54<-15436 Statuses=0009 0009 04:04:08 Msec=2250 True Az=100.365 Ze=-51.54 Az status=0009 Ze status=0009 04:04:08 Check angles 04:04:08 SkyScan query 04:04:08 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:04:08 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:04:09 Check angles 04:04:09 SkyScan query 04:04:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:04:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:04:09 Message to Master queued w/err=0: serial=104220 error=0 04:04:14 Received message from Master: op=Filter serial=104221 04:04:14 Color wheel filter change from 0 to 0 04:04:14 FLIGetFilterPos err=0 currentPosition=0 04:04:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:14 Filter is already there-color wheel unchanged 04:04:14 Received message from Master: op=Shutter serial=104222 04:04:14 Shutter LASER close 04:04:14 Received message from Camera: op=State serial=104224 04:04:14 GetSingleValue result=40 Value=cccccccc 04:04:14 SkyScan query 04:04:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:04:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:15 Parameters OK 04:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:15 Set A/D data flow result=40 04:04:15 Set A/D channel type result=40 04:04:15 Set A/D encoding result=40 04:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:15 Set channel filter=0.000000e+000 result=40 04:04:15 Config A/D Result=40 04:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:15 Get A/D filter: -9.255963e+061 result=40 04:04:15 Get A/D value=-858993460 result=40 04:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:15 Parameters OK 04:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:15 Set A/D data flow result=40 04:04:15 Set A/D channel type result=40 04:04:15 Set A/D encoding result=40 04:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:15 Set channel filter=0.000000e+000 result=40 04:04:15 Config A/D Result=40 04:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:15 Get A/D filter: -9.255963e+061 result=40 04:04:15 Get A/D value=-858993460 result=40 04:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:15 Aux= 04:04:15 Message to Camera, serial 104224 queued 04:04:52 Received message from Master: op=PointingHead serial=104237 04:04:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:04:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:04:52 Point started: ret=0 04:04:52 point_skyscan result=0 04:04:53 Check angles 04:04:53 SkyScan query 04:04:54 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.075<-17405 Statuses=0009 0009 04:04:54 Msec=0 True Az=108.81 Ze=-81.075 Az status=0009 Ze status=0009 04:04:54 Check angles 04:04:54 SkyScan query 04:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 04:04:54 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 04:04:54 Check angles 04:04:54 SkyScan query 04:04:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.985<-20199 Statuses=0008 0009 04:04:55 Msec=1500 True Az=112.995 Ze=-122.985 Az status=0008 Ze status=0009 04:04:55 Check angles 04:04:55 SkyScan query 04:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.94<-21596 Statuses=0008 0009 04:04:56 Msec=2250 True Az=112.995 Ze=-143.94 Az status=0008 Ze status=0009 04:04:56 Check angles 04:04:56 SkyScan query 04:04:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.895<-22993 Statuses=0008 0009 04:04:57 Msec=3000 True Az=112.995 Ze=-164.895 Az status=0008 Ze status=0009 04:04:57 Check angles 04:04:57 SkyScan query 04:04:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:04:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:04:57 Message to Master queued w/err=0: serial=104237 error=0 04:05:02 Received message from Master: op=Filter serial=104238 04:05:02 Color wheel filter change from 0 to 0 04:05:02 FLIGetFilterPos err=0 currentPosition=0 04:05:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:02 Filter is already there-color wheel unchanged 04:05:02 Received message from Master: op=Shutter serial=104239 04:05:02 Shutter LASER open 04:05:03 Received message from Camera: op=State serial=104241 04:05:03 GetSingleValue result=40 Value=cccccccc 04:05:03 SkyScan query 04:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:05:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:03 Parameters OK 04:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:03 Set A/D data flow result=40 04:05:03 Set A/D channel type result=40 04:05:03 Set A/D encoding result=40 04:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:03 Set channel filter=0.000000e+000 result=40 04:05:03 Config A/D Result=40 04:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:03 Get A/D filter: -9.255963e+061 result=40 04:05:03 Get A/D value=-858993460 result=40 04:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:03 Parameters OK 04:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:03 Set A/D data flow result=40 04:05:03 Set A/D channel type result=40 04:05:03 Set A/D encoding result=40 04:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:03 Set channel filter=0.000000e+000 result=40 04:05:03 Config A/D Result=40 04:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:03 Get A/D filter: -9.255963e+061 result=40 04:05:03 Get A/D value=-858993460 result=40 04:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:03 Aux= 04:05:03 Message to Camera, serial 104241 queued 04:05:12 Received message from Master: op=Shutter serial=104251 04:05:12 Shutter LASER close 04:05:12 Received message from Master: op=PointingHead serial=104255 04:05:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:05:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:05:12 Point started: ret=0 04:05:12 point_skyscan result=0 04:05:13 Check angles 04:05:13 SkyScan query 04:05:14 SkyScan query done: ret=0 az=89.88<-5992 ze=157.17<-1522 Statuses=0009 0009 04:05:14 Msec=0 True Az=89.88 Ze=157.17 Az status=0009 Ze status=0009 04:05:14 Check angles 04:05:14 SkyScan query 04:05:15 SkyScan query done: ret=0 az=72.345<-4823 ze=136.2<-2920 Statuses=0009 0009 04:05:15 Msec=750 True Az=72.345 Ze=136.2 Az status=0009 Ze status=0009 04:05:15 Check angles 04:05:15 SkyScan query 04:05:15 SkyScan query done: ret=0 az=54.99<-3666 ze=115.275<-4315 Statuses=0009 0009 04:05:15 Msec=1500 True Az=54.99 Ze=115.275 Az status=0009 Ze status=0009 04:05:15 Check angles 04:05:15 SkyScan query 04:05:16 SkyScan query done: ret=0 az=40.86<-2724 ze=94.26<-5716 Statuses=0009 0009 04:05:16 Msec=2250 True Az=40.86 Ze=94.26 Az status=0009 Ze status=0009 04:05:16 Check angles 04:05:16 SkyScan query 04:05:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.32<-7112 Statuses=0008 0009 04:05:17 Msec=3000 True Az=40.995 Ze=73.32 Az status=0008 Ze status=0009 04:05:17 Check angles 04:05:17 SkyScan query 04:05:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.785<-8481 Statuses=0008 0009 04:05:18 Msec=3750 True Az=40.995 Ze=52.785 Az status=0008 Ze status=0009 04:05:18 Check angles 04:05:18 SkyScan query 04:05:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:05:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:05:18 Message to Master queued w/err=0: serial=104255 error=0 04:05:23 Received message from Master: op=Filter serial=104256 04:05:23 Color wheel filter change from 0 to 0 04:05:23 FLIGetFilterPos err=0 currentPosition=0 04:05:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:23 Filter is already there-color wheel unchanged 04:05:23 Received message from Master: op=Shutter serial=104257 04:05:23 Shutter LASER close 04:05:24 Received message from Camera: op=State serial=104259 04:05:24 GetSingleValue result=40 Value=cccccccc 04:05:24 SkyScan query 04:05:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:05:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:24 Parameters OK 04:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:24 Set A/D data flow result=40 04:05:24 Set A/D channel type result=40 04:05:24 Set A/D encoding result=40 04:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:24 Set channel filter=0.000000e+000 result=40 04:05:24 Config A/D Result=40 04:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:24 Get A/D filter: -9.255963e+061 result=40 04:05:24 Get A/D value=-858993460 result=40 04:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:24 Parameters OK 04:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:24 Set A/D data flow result=40 04:05:24 Set A/D channel type result=40 04:05:24 Set A/D encoding result=40 04:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:24 Set channel filter=0.000000e+000 result=40 04:05:24 Config A/D Result=40 04:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:24 Get A/D filter: -9.255963e+061 result=40 04:05:24 Get A/D value=-858993460 result=40 04:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:24 Aux= [UTC 2018-12-13 04:05:24] 04:05:24 Message to Camera, serial 104259 queued 04:06:01 Received message from Master: op=PointingHead serial=104272 04:06:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:06:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:06:01 Point started: ret=0 04:06:01 point_skyscan result=0 04:06:02 Check angles 04:06:02 SkyScan query 04:06:03 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 04:06:03 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 04:06:03 Check angles 04:06:03 SkyScan query 04:06:03 SkyScan query done: ret=0 az=81.495<-5433 ze=66.495<-7567 Statuses=0009 0008 04:06:03 Msec=750 True Az=81.495 Ze=66.495 Az status=0009 Ze status=0008 04:06:04 Check angles 04:06:04 SkyScan query 04:06:04 SkyScan query done: ret=0 az=98.97<-6598 ze=66.495<-7567 Statuses=0009 0008 04:06:04 Msec=1500 True Az=98.97 Ze=66.495 Az status=0009 Ze status=0008 04:06:04 Check angles 04:06:04 SkyScan query 04:06:05 SkyScan query done: ret=0 az=116.565<-7771 ze=66.495<-7567 Statuses=0009 0008 04:06:05 Msec=2250 True Az=116.565 Ze=66.495 Az status=0009 Ze status=0008 04:06:05 Check angles 04:06:05 SkyScan query 04:06:06 SkyScan query done: ret=0 az=134.385<-8959 ze=66.495<-7567 Statuses=0009 0008 04:06:06 Msec=3000 True Az=134.385 Ze=66.495 Az status=0009 Ze status=0008 04:06:06 Check angles 04:06:06 SkyScan query 04:06:06 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 04:06:06 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 04:06:07 Check angles 04:06:07 SkyScan query 04:06:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:06:07 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:06:07 Message to Master queued w/err=0: serial=104272 error=0 04:06:12 Received message from Master: op=Filter serial=104273 04:06:12 Color wheel filter change from 0 to 0 04:06:12 FLIGetFilterPos err=0 currentPosition=0 04:06:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:12 Filter is already there-color wheel unchanged 04:06:12 Received message from Master: op=Shutter serial=104274 04:06:12 Shutter LASER close 04:06:12 Received message from Camera: op=State serial=104276 04:06:12 GetSingleValue result=40 Value=cccccccc 04:06:12 SkyScan query 04:06:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:06:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:13 Parameters OK 04:06:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:13 Set A/D data flow result=40 04:06:13 Set A/D channel type result=40 04:06:13 Set A/D encoding result=40 04:06:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:13 Set channel filter=0.000000e+000 result=40 04:06:13 Config A/D Result=40 04:06:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:13 Get A/D filter: -9.255963e+061 result=40 04:06:13 Get A/D value=-858993460 result=40 04:06:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:13 Parameters OK 04:06:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:13 Set A/D data flow result=40 04:06:13 Set A/D channel type result=40 04:06:13 Set A/D encoding result=40 04:06:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:13 Set channel filter=0.000000e+000 result=40 04:06:13 Config A/D Result=40 04:06:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:13 Get A/D filter: -9.255963e+061 result=40 04:06:13 Get A/D value=-858993460 result=40 04:06:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:13 Aux= 04:06:13 Message to Camera, serial 104276 queued 04:06:50 Received message from Master: op=PointingHead serial=104289 04:06:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:06:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:06:50 Point started: ret=0 04:06:50 point_skyscan result=0 04:06:51 Check angles 04:06:51 SkyScan query 04:06:52 SkyScan query done: ret=0 az=134.895<-8993 ze=36.66<-9556 Statuses=0009 0009 04:06:52 Msec=0 True Az=134.895 Ze=36.66 Az status=0009 Ze status=0009 04:06:52 Check angles 04:06:52 SkyScan query 04:06:52 SkyScan query done: ret=0 az=117.105<-7807 ze=15.33<-10978 Statuses=0009 0009 04:06:52 Msec=750 True Az=117.105 Ze=15.33 Az status=0009 Ze status=0009 04:06:52 Check angles 04:06:52 SkyScan query 04:06:53 SkyScan query done: ret=0 az=99.72<-6648 ze=-5.655<-12377 Statuses=0009 0009 04:06:53 Msec=1500 True Az=99.72 Ze=-5.655 Az status=0009 Ze status=0009 04:06:53 Check angles 04:06:53 SkyScan query 04:06:54 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.595<-13773 Statuses=0009 0009 04:06:54 Msec=2250 True Az=82.2 Ze=-26.595 Az status=0009 Ze status=0009 04:06:54 Check angles 04:06:54 SkyScan query 04:06:55 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.565<-14571 Statuses=0009 0008 04:06:55 Msec=3000 True Az=64.74 Ze=-38.565 Az status=0009 Ze status=0008 04:06:55 Check angles 04:06:55 SkyScan query 04:06:55 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.535<-14569 Statuses=0009 0008 04:06:55 Msec=3750 True Az=47.295 Ze=-38.535 Az status=0009 Ze status=0008 04:06:55 Check angles 04:06:55 SkyScan query 04:06:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:06:56 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:06:56 Message to Master queued w/err=0: serial=104289 error=0 04:07:01 Received message from Master: op=Filter serial=104290 04:07:01 Color wheel filter change from 0 to 0 04:07:01 FLIGetFilterPos err=0 currentPosition=0 04:07:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:01 Filter is already there-color wheel unchanged 04:07:01 Received message from Master: op=Shutter serial=104291 04:07:01 Shutter LASER close 04:07:01 Received message from Camera: op=State serial=104293 04:07:01 GetSingleValue result=40 Value=cccccccc 04:07:01 SkyScan query 04:07:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:07:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:02 Parameters OK 04:07:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:02 Set A/D data flow result=40 04:07:02 Set A/D channel type result=40 04:07:02 Set A/D encoding result=40 04:07:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:02 Set channel filter=0.000000e+000 result=40 04:07:02 Config A/D Result=40 04:07:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:02 Get A/D filter: -9.255963e+061 result=40 04:07:02 Get A/D value=-858993460 result=40 04:07:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:02 Parameters OK 04:07:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:02 Set A/D data flow result=40 04:07:02 Set A/D channel type result=40 04:07:02 Set A/D encoding result=40 04:07:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:02 Set channel filter=0.000000e+000 result=40 04:07:02 Config A/D Result=40 04:07:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:02 Get A/D filter: -9.255963e+061 result=40 04:07:02 Get A/D value=-858993460 result=40 04:07:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:02 Aux= 04:07:02 Message to Camera, serial 104293 queued 04:07:39 Received message from Master: op=PointingHead serial=104306 04:07:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:07:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:07:39 Point started: ret=0 04:07:39 point_skyscan result=0 04:07:40 Check angles 04:07:40 SkyScan query 04:07:40 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.85<-16590 Statuses=0009 0009 04:07:40 Msec=0 True Az=64.425 Ze=-68.85 Az status=0009 Ze status=0009 04:07:41 Check angles 04:07:41 SkyScan query 04:07:41 SkyScan query done: ret=0 az=82.275<-5485 ze=-90.24<-18016 Statuses=0009 0009 04:07:41 Msec=750 True Az=82.275 Ze=-90.24 Az status=0009 Ze status=0009 04:07:41 Check angles 04:07:41 SkyScan query 04:07:42 SkyScan query done: ret=0 az=100.275<-6685 ze=-111.63<-19442 Statuses=0009 0009 04:07:42 Msec=1500 True Az=100.275 Ze=-111.63 Az status=0009 Ze status=0009 04:07:42 Check angles 04:07:42 SkyScan query 04:07:43 SkyScan query done: ret=0 az=117.63<-7842 ze=-132.54<-20836 Statuses=0009 0009 04:07:43 Msec=2250 True Az=117.63 Ze=-132.54 Az status=0009 Ze status=0009 04:07:43 Check angles 04:07:43 SkyScan query 04:07:43 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 04:07:43 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 04:07:44 Check angles 04:07:44 SkyScan query 04:07:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:07:44 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:07:44 Message to Master queued w/err=0: serial=104306 error=0 04:07:49 Received message from Master: op=Filter serial=104307 04:07:49 Color wheel filter change from 0 to 0 04:07:49 FLIGetFilterPos err=0 currentPosition=0 04:07:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:49 Filter is already there-color wheel unchanged 04:07:49 Received message from Master: op=Shutter serial=104308 04:07:49 Shutter LASER close 04:07:49 Received message from Camera: op=State serial=104310 04:07:49 GetSingleValue result=40 Value=cccccccc 04:07:49 SkyScan query 04:07:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:07:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:50 Parameters OK 04:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:50 Set A/D data flow result=40 04:07:50 Set A/D channel type result=40 04:07:50 Set A/D encoding result=40 04:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:50 Set channel filter=0.000000e+000 result=40 04:07:50 Config A/D Result=40 04:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:50 Get A/D filter: -9.255963e+061 result=40 04:07:50 Get A/D value=-858993460 result=40 04:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:50 Parameters OK 04:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:50 Set A/D data flow result=40 04:07:50 Set A/D channel type result=40 04:07:50 Set A/D encoding result=40 04:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:50 Set channel filter=0.000000e+000 result=40 04:07:50 Config A/D Result=40 04:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:50 Get A/D filter: -9.255963e+061 result=40 04:07:50 Get A/D value=-858993460 result=40 04:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:50 Aux= 04:07:50 Message to Camera, serial 104310 queued 04:08:26 Received message from Master: op=PointingHead serial=104322 04:08:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:08:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:08:26 Point started: ret=0 04:08:26 point_skyscan result=0 04:08:27 Check angles 04:08:27 SkyScan query 04:08:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 04:08:27 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 04:08:28 Check angles 04:08:28 SkyScan query 04:08:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:08:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:08:28 Message to Master queued w/err=0: serial=104322 error=0 04:08:33 Received message from Master: op=Filter serial=104323 04:08:33 Color wheel filter change from 0 to 0 04:08:33 FLIGetFilterPos err=0 currentPosition=0 04:08:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:33 Filter is already there-color wheel unchanged 04:08:33 Received message from Master: op=Shutter serial=104324 04:08:33 Shutter LASER open 04:08:34 Received message from Camera: op=State serial=104326 04:08:34 GetSingleValue result=40 Value=cccccccc 04:08:34 SkyScan query 04:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:08:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:34 Parameters OK 04:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:34 Set A/D data flow result=40 04:08:34 Set A/D channel type result=40 04:08:34 Set A/D encoding result=40 04:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:34 Set channel filter=0.000000e+000 result=40 04:08:34 Config A/D Result=40 04:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:34 Get A/D filter: -9.255963e+061 result=40 04:08:34 Get A/D value=-858993460 result=40 04:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:34 Parameters OK 04:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:34 Set A/D data flow result=40 04:08:34 Set A/D channel type result=40 04:08:34 Set A/D encoding result=40 04:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:34 Set channel filter=0.000000e+000 result=40 04:08:34 Config A/D Result=40 04:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:34 Get A/D filter: -9.255963e+061 result=40 04:08:34 Get A/D value=-858993460 result=40 04:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:34 Aux= 04:08:34 Message to Camera, serial 104326 queued 04:08:43 Received message from Master: op=Shutter serial=104336 04:08:43 Shutter LASER close 04:08:43 Received message from Master: op=PointingHead serial=104340 04:08:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:08:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:08:44 Point started: ret=0 04:08:44 point_skyscan result=0 04:08:44 Check angles 04:08:44 SkyScan query 04:08:45 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.8<-21520 Statuses=0009 0009 04:08:45 Msec=0 True Az=136.38 Ze=-142.8 Az status=0009 Ze status=0009 04:08:45 Check angles 04:08:45 SkyScan query 04:08:46 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.815<-20121 Statuses=0009 0009 04:08:46 Msec=750 True Az=153.81 Ze=-121.815 Az status=0009 Ze status=0009 04:08:46 Check angles 04:08:46 SkyScan query 04:08:46 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.395<-18693 Statuses=0009 0009 04:08:46 Msec=1500 True Az=171.69 Ze=-100.395 Az status=0009 Ze status=0009 04:08:47 Check angles 04:08:47 SkyScan query 04:08:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.47<-17298 Statuses=0008 0009 04:08:47 Msec=2250 True Az=176.01 Ze=-79.47 Az status=0008 Ze status=0009 04:08:47 Check angles 04:08:47 SkyScan query 04:08:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.5<-15900 Statuses=0008 0009 04:08:48 Msec=3000 True Az=176.01 Ze=-58.5 Az status=0008 Ze status=0009 04:08:48 Check angles 04:08:48 SkyScan query 04:08:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:08:49 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:08:49 Message to Master queued w/err=0: serial=104340 error=0 04:08:54 Received message from Master: op=Filter serial=104341 04:08:54 Color wheel filter change from 0 to 0 04:08:54 FLIGetFilterPos err=0 currentPosition=0 04:08:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:54 Filter is already there-color wheel unchanged 04:08:54 Received message from Master: op=Shutter serial=104342 04:08:54 Shutter LASER close 04:08:54 Received message from Camera: op=State serial=104344 04:08:54 GetSingleValue result=40 Value=cccccccc 04:08:54 SkyScan query 04:08:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:08:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:55 Parameters OK 04:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:55 Set A/D data flow result=40 04:08:55 Set A/D channel type result=40 04:08:55 Set A/D encoding result=40 04:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:55 Set channel filter=0.000000e+000 result=40 04:08:55 Config A/D Result=40 04:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:55 Get A/D filter: -9.255963e+061 result=40 04:08:55 Get A/D value=-858993460 result=40 04:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:55 Parameters OK 04:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:55 Set A/D data flow result=40 04:08:55 Set A/D channel type result=40 04:08:55 Set A/D encoding result=40 04:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:55 Set channel filter=0.000000e+000 result=40 04:08:55 Config A/D Result=40 04:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:55 Get A/D filter: -9.255963e+061 result=40 04:08:55 Get A/D value=-858993460 result=40 04:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:55 Aux= 04:08:55 Message to Camera, serial 104344 queued 04:09:31 Received message from Master: op=PointingHead serial=104357 04:09:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:09:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:09:32 Point started: ret=0 04:09:32 point_skyscan result=0 04:09:33 Check angles 04:09:33 SkyScan query 04:09:33 SkyScan query done: ret=0 az=152.46<-10164 ze=-21.18<-13412 Statuses=0009 0009 04:09:33 Msec=0 True Az=152.46 Ze=-21.18 Az status=0009 Ze status=0009 04:09:33 Check angles 04:09:33 SkyScan query 04:09:34 SkyScan query done: ret=0 az=134.94<-8996 ze=-0.225<-12015 Statuses=0009 0009 04:09:34 Msec=750 True Az=134.94 Ze=-0.225 Az status=0009 Ze status=0009 04:09:34 Check angles 04:09:34 SkyScan query 04:09:35 SkyScan query done: ret=0 az=117.39<-7826 ze=20.715<-10619 Statuses=0009 0009 04:09:35 Msec=1500 True Az=117.39 Ze=20.715 Az status=0009 Ze status=0009 04:09:35 Check angles 04:09:35 SkyScan query 04:09:35 SkyScan query done: ret=0 az=100.005<-6667 ze=41.7<-9220 Statuses=0009 0009 04:09:35 Msec=2250 True Az=100.005 Ze=41.7 Az status=0009 Ze status=0009 04:09:36 Check angles 04:09:36 SkyScan query 04:09:36 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 04:09:36 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 04:09:36 Check angles 04:09:36 SkyScan query 04:09:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:09:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:09:37 Message to Master queued w/err=0: serial=104357 error=0 04:09:42 Received message from Master: op=Filter serial=104358 04:09:42 Color wheel filter change from 0 to 0 04:09:42 FLIGetFilterPos err=0 currentPosition=0 04:09:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:42 Filter is already there-color wheel unchanged 04:09:42 Received message from Master: op=Shutter serial=104359 04:09:42 Shutter LASER close 04:09:42 Received message from Camera: op=State serial=104361 04:09:42 GetSingleValue result=40 Value=cccccccc 04:09:42 SkyScan query 04:09:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:09:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:43 Parameters OK 04:09:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:43 Set A/D data flow result=40 04:09:43 Set A/D channel type result=40 04:09:43 Set A/D encoding result=40 04:09:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:43 Set channel filter=0.000000e+000 result=40 04:09:43 Config A/D Result=40 04:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:43 Get A/D filter: -9.255963e+061 result=40 04:09:43 Get A/D value=-858993460 result=40 04:09:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:43 Parameters OK 04:09:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:43 Set A/D data flow result=40 04:09:43 Set A/D channel type result=40 04:09:43 Set A/D encoding result=40 04:09:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:43 Set channel filter=0.000000e+000 result=40 04:09:43 Config A/D Result=40 04:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:43 Get A/D filter: -9.255963e+061 result=40 04:09:43 Get A/D value=-858993460 result=40 04:09:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:43 Aux= 04:09:43 Message to Camera, serial 104361 queued 04:10:20 Received message from Master: op=PointingHead serial=104374 04:10:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:10:20 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:10:20 Point started: ret=0 04:10:20 point_skyscan result=0 04:10:21 Check angles 04:10:21 SkyScan query 04:10:21 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 04:10:21 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 04:10:21 Check angles 04:10:21 SkyScan query 04:10:22 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 04:10:22 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 04:10:22 Check angles 04:10:22 SkyScan query 04:10:23 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 04:10:23 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 04:10:23 Check angles 04:10:23 SkyScan query 04:10:24 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 04:10:24 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 04:10:24 Check angles 04:10:24 SkyScan query 04:10:24 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:10:24 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:10:24 Check angles 04:10:24 SkyScan query 04:10:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:10:25 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:10:25 Message to Master queued w/err=0: serial=104374 error=0 04:10:30 Received message from Master: op=Filter serial=104375 04:10:30 Color wheel filter change from 0 to 0 04:10:30 FLIGetFilterPos err=0 currentPosition=0 04:10:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:30 Filter is already there-color wheel unchanged 04:10:30 Received message from Master: op=Shutter serial=104376 04:10:30 Shutter LASER close 04:10:30 Received message from Camera: op=State serial=104378 04:10:30 GetSingleValue result=40 Value=cccccccc 04:10:30 SkyScan query 04:10:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:10:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:31 Parameters OK 04:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:31 Set A/D data flow result=40 04:10:31 Set A/D channel type result=40 04:10:31 Set A/D encoding result=40 04:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:31 Set channel filter=0.000000e+000 result=40 04:10:31 Config A/D Result=40 04:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:31 Get A/D filter: -9.255963e+061 result=40 04:10:31 Get A/D value=-858993460 result=40 04:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:31 Parameters OK 04:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:31 Set A/D data flow result=40 04:10:31 Set A/D channel type result=40 04:10:31 Set A/D encoding result=40 04:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:31 Set channel filter=0.000000e+000 result=40 04:10:31 Config A/D Result=40 04:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:31 Get A/D filter: -9.255963e+061 result=40 04:10:31 Get A/D value=-858993460 result=40 04:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:31 Aux= 04:10:31 Message to Camera, serial 104378 queued 04:11:08 Received message from Master: op=PointingHead serial=104391 04:11:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:11:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:11:08 Point started: ret=0 04:11:08 point_skyscan result=0 04:11:09 Check angles 04:11:09 SkyScan query 04:11:09 SkyScan query done: ret=0 az=152.955<-10197 ze=8.73<-11418 Statuses=0009 0009 04:11:09 Msec=0 True Az=152.955 Ze=8.73 Az status=0009 Ze status=0009 04:11:10 Check angles 04:11:10 SkyScan query 04:11:10 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.63<-12842 Statuses=0009 0009 04:11:10 Msec=750 True Az=135.285 Ze=-12.63 Az status=0009 Ze status=0009 04:11:10 Check angles 04:11:10 SkyScan query 04:11:11 SkyScan query done: ret=0 az=117.72<-7848 ze=-33.6<-14240 Statuses=0009 0009 04:11:11 Msec=1500 True Az=117.72 Ze=-33.6 Az status=0009 Ze status=0009 04:11:11 Check angles 04:11:11 SkyScan query 04:11:12 SkyScan query done: ret=0 az=100.335<-6689 ze=-51.555<-15437 Statuses=0009 0009 04:11:12 Msec=2250 True Az=100.335 Ze=-51.555 Az status=0009 Ze status=0009 04:11:12 Check angles 04:11:12 SkyScan query 04:11:12 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:11:12 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:11:13 Check angles 04:11:13 SkyScan query 04:11:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:11:13 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:11:13 Message to Master queued w/err=0: serial=104391 error=0 04:11:18 Received message from Master: op=Filter serial=104392 04:11:18 Color wheel filter change from 0 to 0 04:11:18 FLIGetFilterPos err=0 currentPosition=0 04:11:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:18 Filter is already there-color wheel unchanged 04:11:18 Received message from Master: op=Shutter serial=104393 04:11:18 Shutter LASER close 04:11:18 Received message from Camera: op=State serial=104395 04:11:18 GetSingleValue result=40 Value=cccccccc 04:11:18 SkyScan query 04:11:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:11:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:19 Parameters OK 04:11:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:19 Set A/D data flow result=40 04:11:19 Set A/D channel type result=40 04:11:19 Set A/D encoding result=40 04:11:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:19 Set channel filter=0.000000e+000 result=40 04:11:19 Config A/D Result=40 04:11:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:19 Get A/D filter: -9.255963e+061 result=40 04:11:19 Get A/D value=-858993460 result=40 04:11:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:19 Parameters OK 04:11:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:19 Set A/D data flow result=40 04:11:19 Set A/D channel type result=40 04:11:19 Set A/D encoding result=40 04:11:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:19 Set channel filter=0.000000e+000 result=40 04:11:19 Config A/D Result=40 04:11:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:19 Get A/D filter: -9.255963e+061 result=40 04:11:19 Get A/D value=-858993460 result=40 04:11:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:19 Aux= 04:11:19 Message to Camera, serial 104395 queued 04:11:56 Received message from Master: op=PointingHead serial=104408 04:11:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:11:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:11:56 Point started: ret=0 04:11:56 point_skyscan result=0 04:11:57 Check angles 04:11:57 SkyScan query 04:11:57 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.12<-17408 Statuses=0009 0009 04:11:57 Msec=0 True Az=108.81 Ze=-81.12 Az status=0009 Ze status=0009 04:11:58 Check angles 04:11:58 SkyScan query 04:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.06<-18804 Statuses=0008 0009 04:11:58 Msec=750 True Az=112.995 Ze=-102.06 Az status=0008 Ze status=0009 04:11:58 Check angles 04:11:58 SkyScan query 04:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 04:11:59 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 04:11:59 Check angles 04:11:59 SkyScan query 04:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.97<-21598 Statuses=0008 0009 04:12:00 Msec=2250 True Az=112.995 Ze=-143.97 Az status=0008 Ze status=0009 04:12:00 Check angles 04:12:00 SkyScan query 04:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 04:12:00 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 04:12:01 Check angles 04:12:01 SkyScan query 04:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:12:01 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:12:01 Message to Master queued w/err=0: serial=104408 error=0 04:12:06 Received message from Master: op=Filter serial=104409 04:12:06 Color wheel filter change from 0 to 0 04:12:06 FLIGetFilterPos err=0 currentPosition=0 04:12:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:06 Filter is already there-color wheel unchanged 04:12:06 Received message from Master: op=Shutter serial=104410 04:12:06 Shutter LASER open 04:12:07 Received message from Camera: op=State serial=104412 04:12:07 GetSingleValue result=40 Value=cccccccc 04:12:07 SkyScan query 04:12:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:12:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:07 Parameters OK 04:12:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:07 Set A/D data flow result=40 04:12:07 Set A/D channel type result=40 04:12:07 Set A/D encoding result=40 04:12:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:07 Set channel filter=0.000000e+000 result=40 04:12:07 Config A/D Result=40 04:12:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:07 Get A/D filter: -9.255963e+061 result=40 04:12:07 Get A/D value=-858993460 result=40 04:12:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:07 Parameters OK 04:12:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:07 Set A/D data flow result=40 04:12:07 Set A/D channel type result=40 04:12:07 Set A/D encoding result=40 04:12:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:07 Set channel filter=0.000000e+000 result=40 04:12:07 Config A/D Result=40 04:12:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:07 Get A/D filter: -9.255963e+061 result=40 04:12:07 Get A/D value=-858993460 result=40 04:12:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:07 Aux= 04:12:07 Message to Camera, serial 104412 queued 04:12:16 Received message from Master: op=Shutter serial=104422 04:12:16 Shutter LASER close 04:12:16 Received message from Master: op=PointingHead serial=104426 04:12:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:12:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:12:16 Point started: ret=0 04:12:16 point_skyscan result=0 04:12:17 Check angles 04:12:17 SkyScan query 04:12:18 SkyScan query done: ret=0 az=90.12<-6008 ze=157.455<-1503 Statuses=0009 0009 04:12:18 Msec=0 True Az=90.12 Ze=157.455 Az status=0009 Ze status=0009 04:12:18 Check angles 04:12:18 SkyScan query 04:12:18 SkyScan query done: ret=0 az=72.675<-4845 ze=136.455<-2903 Statuses=0009 0009 04:12:18 Msec=750 True Az=72.675 Ze=136.455 Az status=0009 Ze status=0009 04:12:19 Check angles 04:12:19 SkyScan query 04:12:19 SkyScan query done: ret=0 az=55.125<-3675 ze=115.545<-4297 Statuses=0009 0009 04:12:19 Msec=1500 True Az=55.125 Ze=115.545 Az status=0009 Ze status=0009 04:12:19 Check angles 04:12:19 SkyScan query 04:12:20 SkyScan query done: ret=0 az=40.86<-2724 ze=94.56<-5696 Statuses=0009 0009 04:12:20 Msec=2250 True Az=40.86 Ze=94.56 Az status=0009 Ze status=0009 04:12:20 Check angles 04:12:20 SkyScan query 04:12:21 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 04:12:21 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 04:12:21 Check angles 04:12:21 SkyScan query 04:12:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 04:12:21 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 04:12:22 Check angles 04:12:22 SkyScan query 04:12:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:12:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:12:22 Message to Master queued w/err=0: serial=104426 error=0 04:12:27 Received message from Master: op=Filter serial=104427 04:12:27 Color wheel filter change from 0 to 0 04:12:27 FLIGetFilterPos err=0 currentPosition=0 04:12:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:27 Filter is already there-color wheel unchanged 04:12:27 Received message from Master: op=Shutter serial=104428 04:12:27 Shutter LASER close 04:12:27 Received message from Camera: op=State serial=104430 04:12:27 GetSingleValue result=40 Value=cccccccc 04:12:27 SkyScan query 04:12:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:12:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:28 Parameters OK 04:12:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:28 Set A/D data flow result=40 04:12:28 Set A/D channel type result=40 04:12:28 Set A/D encoding result=40 04:12:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:28 Set channel filter=0.000000e+000 result=40 04:12:28 Config A/D Result=40 04:12:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:28 Get A/D filter: -9.255963e+061 result=40 04:12:28 Get A/D value=-858993460 result=40 04:12:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:28 Parameters OK 04:12:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:28 Set A/D data flow result=40 04:12:28 Set A/D channel type result=40 04:12:28 Set A/D encoding result=40 04:12:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:28 Set channel filter=0.000000e+000 result=40 04:12:28 Config A/D Result=40 04:12:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:28 Get A/D filter: -9.255963e+061 result=40 04:12:28 Get A/D value=-858993460 result=40 04:12:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:28 Aux= 04:12:28 Message to Camera, serial 104430 queued 04:13:05 Received message from Master: op=PointingHead serial=104443 04:13:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:13:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:13:05 Point started: ret=0 04:13:05 point_skyscan result=0 04:13:06 Check angles 04:13:06 SkyScan query 04:13:07 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 04:13:07 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 04:13:07 Check angles 04:13:07 SkyScan query 04:13:07 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 04:13:07 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 04:13:07 Check angles 04:13:07 SkyScan query 04:13:08 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 04:13:08 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 04:13:08 Check angles 04:13:08 SkyScan query 04:13:09 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 04:13:09 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 04:13:09 Check angles 04:13:09 SkyScan query 04:13:10 SkyScan query done: ret=0 az=134.43<-8962 ze=66.495<-7567 Statuses=0009 0008 04:13:10 Msec=3000 True Az=134.43 Ze=66.495 Az status=0009 Ze status=0008 04:13:10 Check angles 04:13:10 SkyScan query 04:13:10 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 04:13:10 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 04:13:10 Check angles 04:13:10 SkyScan query 04:13:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:13:11 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:13:11 Message to Master queued w/err=0: serial=104443 error=0 04:13:16 Received message from Master: op=Filter serial=104444 04:13:16 Color wheel filter change from 0 to 0 04:13:16 FLIGetFilterPos err=0 currentPosition=0 04:13:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:16 Filter is already there-color wheel unchanged 04:13:16 Received message from Master: op=Shutter serial=104445 04:13:16 Shutter LASER close 04:13:16 Received message from Camera: op=State serial=104447 04:13:16 GetSingleValue result=40 Value=cccccccc 04:13:16 SkyScan query 04:13:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:13:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:17 Parameters OK 04:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:17 Set A/D data flow result=40 04:13:17 Set A/D channel type result=40 04:13:17 Set A/D encoding result=40 04:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:17 Set channel filter=0.000000e+000 result=40 04:13:17 Config A/D Result=40 04:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:17 Get A/D filter: -9.255963e+061 result=40 04:13:17 Get A/D value=-858993460 result=40 04:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:17 Parameters OK 04:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:17 Set A/D data flow result=40 04:13:17 Set A/D channel type result=40 04:13:17 Set A/D encoding result=40 04:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:17 Set channel filter=0.000000e+000 result=40 04:13:17 Config A/D Result=40 04:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:17 Get A/D filter: -9.255963e+061 result=40 04:13:17 Get A/D value=-858993460 result=40 04:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:17 Aux= 04:13:17 Message to Camera, serial 104447 queued 04:13:54 Received message from Master: op=PointingHead serial=104460 04:13:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:13:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:13:54 Point started: ret=0 04:13:54 point_skyscan result=0 04:13:55 Check angles 04:13:55 SkyScan query 04:13:55 SkyScan query done: ret=0 az=134.46<-8964 ze=36.15<-9590 Statuses=0009 0009 04:13:55 Msec=0 True Az=134.46 Ze=36.15 Az status=0009 Ze status=0009 04:13:56 Check angles 04:13:56 SkyScan query 04:13:56 SkyScan query done: ret=0 az=116.685<-7779 ze=14.715<-11019 Statuses=0009 0009 04:13:56 Msec=750 True Az=116.685 Ze=14.715 Az status=0009 Ze status=0009 04:13:56 Check angles 04:13:56 SkyScan query 04:13:57 SkyScan query done: ret=0 az=99.255<-6617 ze=-6.195<-12413 Statuses=0009 0009 04:13:57 Msec=1500 True Az=99.255 Ze=-6.195 Az status=0009 Ze status=0009 04:13:57 Check angles 04:13:57 SkyScan query 04:13:58 SkyScan query done: ret=0 az=81.825<-5455 ze=-27.18<-13812 Statuses=0009 0009 04:13:58 Msec=2250 True Az=81.825 Ze=-27.18 Az status=0009 Ze status=0009 04:13:58 Check angles 04:13:58 SkyScan query 04:13:59 SkyScan query done: ret=0 az=63.93<-4262 ze=-38.565<-14571 Statuses=0009 0008 04:13:59 Msec=3000 True Az=63.93 Ze=-38.565 Az status=0009 Ze status=0008 04:13:59 Check angles 04:13:59 SkyScan query 04:13:59 SkyScan query done: ret=0 az=46.53<-3102 ze=-38.52<-14568 Statuses=0009 0008 04:13:59 Msec=3750 True Az=46.53 Ze=-38.52 Az status=0009 Ze status=0008 04:13:59 Check angles 04:13:59 SkyScan query 04:14:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:14:00 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:14:00 Message to Master queued w/err=0: serial=104460 error=0 04:14:05 Received message from Master: op=Filter serial=104461 04:14:05 Color wheel filter change from 0 to 0 04:14:05 FLIGetFilterPos err=0 currentPosition=0 04:14:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:05 Filter is already there-color wheel unchanged 04:14:05 Received message from Master: op=Shutter serial=104462 04:14:05 Shutter LASER close 04:14:05 Received message from Camera: op=State serial=104464 04:14:05 GetSingleValue result=40 Value=cccccccc 04:14:05 SkyScan query 04:14:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:14:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:06 Parameters OK 04:14:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:06 Set A/D data flow result=40 04:14:06 Set A/D channel type result=40 04:14:06 Set A/D encoding result=40 04:14:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:06 Set channel filter=0.000000e+000 result=40 04:14:06 Config A/D Result=40 04:14:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:06 Get A/D filter: -9.255963e+061 result=40 04:14:06 Get A/D value=-858993460 result=40 04:14:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:06 Parameters OK 04:14:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:06 Set A/D data flow result=40 04:14:06 Set A/D channel type result=40 04:14:06 Set A/D encoding result=40 04:14:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:06 Set channel filter=0.000000e+000 result=40 04:14:06 Config A/D Result=40 04:14:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:06 Get A/D filter: -9.255963e+061 result=40 04:14:06 Get A/D value=-858993460 result=40 04:14:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:06 Aux= 04:14:06 Message to Camera, serial 104464 queued 04:14:43 Received message from Master: op=PointingHead serial=104477 04:14:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:14:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:14:43 Point started: ret=0 04:14:43 point_skyscan result=0 04:14:44 Check angles 04:14:44 SkyScan query 04:14:44 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.265<-16551 Statuses=0009 0009 04:14:44 Msec=0 True Az=63.945 Ze=-68.265 Az status=0009 Ze status=0009 04:14:44 Check angles 04:14:44 SkyScan query 04:14:45 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.265<-17951 Statuses=0009 0009 04:14:45 Msec=750 True Az=81.33 Ze=-89.265 Az status=0009 Ze status=0009 04:14:45 Check angles 04:14:45 SkyScan query 04:14:46 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.22<-19348 Statuses=0009 0009 04:14:46 Msec=1500 True Az=98.85 Ze=-110.22 Az status=0009 Ze status=0009 04:14:46 Check angles 04:14:46 SkyScan query 04:14:47 SkyScan query done: ret=0 az=116.43<-7762 ze=-131.16<-20744 Statuses=0009 0009 04:14:47 Msec=2250 True Az=116.43 Ze=-131.16 Az status=0009 Ze status=0009 04:14:47 Check angles 04:14:47 SkyScan query 04:14:47 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 04:14:47 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 04:14:47 Check angles 04:14:47 SkyScan query 04:14:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:14:48 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:14:48 Message to Master queued w/err=0: serial=104477 error=0 04:14:53 Received message from Master: op=Filter serial=104478 04:14:53 Color wheel filter change from 0 to 0 04:14:53 FLIGetFilterPos err=0 currentPosition=0 04:14:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:53 Filter is already there-color wheel unchanged 04:14:53 Received message from Master: op=Shutter serial=104479 04:14:53 Shutter LASER close 04:14:53 Received message from Camera: op=State serial=104481 04:14:53 GetSingleValue result=40 Value=cccccccc 04:14:53 SkyScan query 04:14:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:14:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:54 Parameters OK 04:14:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:54 Set A/D data flow result=40 04:14:54 Set A/D channel type result=40 04:14:54 Set A/D encoding result=40 04:14:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:54 Set channel filter=0.000000e+000 result=40 04:14:54 Config A/D Result=40 04:14:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:54 Get A/D filter: -9.255963e+061 result=40 04:14:54 Get A/D value=-858993460 result=40 04:14:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:54 Parameters OK 04:14:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:54 Set A/D data flow result=40 04:14:54 Set A/D channel type result=40 04:14:54 Set A/D encoding result=40 04:14:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:54 Set channel filter=0.000000e+000 result=40 04:14:54 Config A/D Result=40 04:14:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:54 Get A/D filter: -9.255963e+061 result=40 04:14:54 Get A/D value=-858993460 result=40 04:14:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:54 Aux= 04:14:54 Message to Camera, serial 104481 queued 04:15:27 Received message from Master: op=Identify serial=104487 04:15:31 Received message from Master: op=PointingHead serial=104497 04:15:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:15:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:15:31 Point started: ret=0 04:15:31 point_skyscan result=0 04:15:32 Check angles 04:15:32 SkyScan query 04:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0009 0009 04:15:32 Msec=0 True Az=112.995 Ze=-171.48 Az status=0009 Ze status=0009 04:15:33 Check angles 04:15:33 SkyScan query 04:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:15:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:15:33 Message to Master queued w/err=0: serial=104497 error=0 04:15:38 Received message from Master: op=Filter serial=104498 04:15:38 Color wheel filter change from 0 to 0 04:15:38 FLIGetFilterPos err=0 currentPosition=0 04:15:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:38 Filter is already there-color wheel unchanged 04:15:38 Received message from Master: op=Shutter serial=104499 04:15:38 Shutter LASER open 04:15:39 Received message from Camera: op=State serial=104501 04:15:39 GetSingleValue result=40 Value=cccccccc 04:15:39 SkyScan query 04:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:39 Parameters OK 04:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:39 Set A/D data flow result=40 04:15:39 Set A/D channel type result=40 04:15:39 Set A/D encoding result=40 04:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:39 Set channel filter=0.000000e+000 result=40 04:15:39 Config A/D Result=40 04:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:39 Get A/D filter: -9.255963e+061 result=40 04:15:39 Get A/D value=-858993460 result=40 04:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:39 Parameters OK 04:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:39 Set A/D data flow result=40 04:15:39 Set A/D channel type result=40 04:15:39 Set A/D encoding result=40 04:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:39 Set channel filter=0.000000e+000 result=40 04:15:39 Config A/D Result=40 04:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:39 Get A/D filter: -9.255963e+061 result=40 04:15:39 Get A/D value=-858993460 result=40 04:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:39 Aux= 04:15:39 Message to Camera, serial 104501 queued 04:15:48 Received message from Master: op=Shutter serial=104511 04:15:48 Shutter LASER close 04:15:48 Received message from Master: op=PointingHead serial=104515 04:15:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:15:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:15:48 Point started: ret=0 04:15:48 point_skyscan result=0 04:15:49 Check angles 04:15:49 SkyScan query 04:15:50 SkyScan query done: ret=0 az=136.245<-9083 ze=-142.935<-21529 Statuses=0009 0009 04:15:50 Msec=0 True Az=136.245 Ze=-142.935 Az status=0009 Ze status=0009 [UTC 2018-12-13 04:15:50] 04:15:50 Check angles 04:15:50 SkyScan query 04:15:51 SkyScan query done: ret=0 az=155.175<-10345 ze=-120.225<-20015 Statuses=0009 0009 04:15:51 Msec=750 True Az=155.175 Ze=-120.225 Az status=0009 Ze status=0009 04:15:51 Check angles 04:15:51 SkyScan query 04:15:51 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.055<-18737 Statuses=0009 0009 04:15:51 Msec=1500 True Az=171.21 Ze=-101.055 Az status=0009 Ze status=0009 04:15:51 Check angles 04:15:51 SkyScan query 04:15:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.13<-17342 Statuses=0008 0009 04:15:52 Msec=2250 True Az=176.01 Ze=-80.13 Az status=0008 Ze status=0009 04:15:52 Check angles 04:15:52 SkyScan query 04:15:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.13<-15942 Statuses=0008 0009 04:15:53 Msec=3000 True Az=176.01 Ze=-59.13 Az status=0008 Ze status=0009 [UTC 2018-12-13 04:15:53] 04:15:53 Check angles 04:15:53 SkyScan query 04:15:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:15:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:15:54 Message to Master queued w/err=0: serial=104515 error=0 04:15:59 Received message from Master: op=Filter serial=104516 04:15:59 Color wheel filter change from 0 to 0 04:15:59 FLIGetFilterPos err=0 currentPosition=0 04:15:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:59 Filter is already there-color wheel unchanged 04:15:59 Received message from Master: op=Shutter serial=104517 04:15:59 Shutter LASER close 04:15:59 Received message from Camera: op=State serial=104519 04:15:59 GetSingleValue result=40 Value=cccccccc 04:15:59 SkyScan query 04:15:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:15:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:59 Parameters OK 04:15:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:59 Set A/D data flow result=40 04:15:59 Set A/D channel type result=40 04:15:59 Set A/D encoding result=40 04:15:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:59 Set channel filter=0.000000e+000 result=40 04:15:59 Config A/D Result=40 04:15:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:59 Get A/D filter: -9.255963e+061 result=40 04:15:59 Get A/D value=-858993460 result=40 04:15:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:59 Parameters OK 04:15:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:59 Set A/D data flow result=40 04:15:59 Set A/D channel type result=40 04:15:59 Set A/D encoding result=40 04:15:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:59 Set channel filter=0.000000e+000 result=40 04:15:59 Config A/D Result=40 04:15:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:59 Get A/D filter: -9.255963e+061 result=40 04:15:59 Get A/D value=-858993460 result=40 04:15:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:59 Aux= 04:15:59 Message to Camera, serial 104519 queued 04:16:36 Received message from Master: op=PointingHead serial=104532 04:16:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:16:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:16:37 Point started: ret=0 04:16:37 point_skyscan result=0 04:16:37 Check angles 04:16:37 SkyScan query 04:16:38 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.015<-13401 Statuses=0009 0009 04:16:38 Msec=0 True Az=152.655 Ze=-21.015 Az status=0009 Ze status=0009 04:16:38 Check angles 04:16:38 SkyScan query 04:16:39 SkyScan query done: ret=0 az=134.97<-8998 ze=-0.09<-12006 Statuses=0009 0009 04:16:39 Msec=750 True Az=134.97 Ze=-0.09 Az status=0009 Ze status=0009 04:16:39 Check angles 04:16:39 SkyScan query 04:16:40 SkyScan query done: ret=0 az=117.45<-7830 ze=20.88<-10608 Statuses=0009 0009 04:16:40 Msec=1500 True Az=117.45 Ze=20.88 Az status=0009 Ze status=0009 04:16:40 Check angles 04:16:40 SkyScan query 04:16:40 SkyScan query done: ret=0 az=100.08<-6672 ze=41.85<-9210 Statuses=0009 0009 04:16:40 Msec=2250 True Az=100.08 Ze=41.85 Az status=0009 Ze status=0009 04:16:40 Check angles 04:16:40 SkyScan query 04:16:41 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:16:41 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:16:41 Check angles 04:16:41 SkyScan query 04:16:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:16:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:16:42 Message to Master queued w/err=0: serial=104532 error=0 04:16:47 Received message from Master: op=Filter serial=104533 04:16:47 Color wheel filter change from 0 to 0 04:16:47 FLIGetFilterPos err=0 currentPosition=0 04:16:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:47 Filter is already there-color wheel unchanged 04:16:47 Received message from Master: op=Shutter serial=104534 04:16:47 Shutter LASER close 04:16:47 Received message from Camera: op=State serial=104536 04:16:47 GetSingleValue result=40 Value=cccccccc 04:16:47 SkyScan query 04:16:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:16:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:48 Parameters OK 04:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:48 Set A/D data flow result=40 04:16:48 Set A/D channel type result=40 04:16:48 Set A/D encoding result=40 04:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:48 Set channel filter=0.000000e+000 result=40 04:16:48 Config A/D Result=40 04:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:48 Get A/D filter: -9.255963e+061 result=40 04:16:48 Get A/D value=-858993460 result=40 04:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:48 Parameters OK 04:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:48 Set A/D data flow result=40 04:16:48 Set A/D channel type result=40 04:16:48 Set A/D encoding result=40 04:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:48 Set channel filter=0.000000e+000 result=40 04:16:48 Config A/D Result=40 04:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:48 Get A/D filter: -9.255963e+061 result=40 04:16:48 Get A/D value=-858993460 result=40 04:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:48 Aux= 04:16:48 Message to Camera, serial 104536 queued 04:17:24 Received message from Master: op=PointingHead serial=104549 04:17:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:17:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:17:25 Point started: ret=0 04:17:25 point_skyscan result=0 04:17:26 Check angles 04:17:26 SkyScan query 04:17:26 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 04:17:26 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 04:17:26 Check angles 04:17:26 SkyScan query 04:17:27 SkyScan query done: ret=0 az=127.035<-8469 ze=38.505<-9433 Statuses=0009 0008 04:17:27 Msec=750 True Az=127.035 Ze=38.505 Az status=0009 Ze status=0008 04:17:27 Check angles 04:17:27 SkyScan query 04:17:28 SkyScan query done: ret=0 az=144.54<-9636 ze=38.505<-9433 Statuses=0009 0008 04:17:28 Msec=1500 True Az=144.54 Ze=38.505 Az status=0009 Ze status=0008 04:17:28 Check angles 04:17:28 SkyScan query 04:17:28 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 04:17:28 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 04:17:29 Check angles 04:17:29 SkyScan query 04:17:29 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:17:29 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:17:29 Check angles 04:17:29 SkyScan query 04:17:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:17:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:17:30 Message to Master queued w/err=0: serial=104549 error=0 04:17:35 Received message from Master: op=Filter serial=104550 04:17:35 Color wheel filter change from 0 to 0 04:17:35 FLIGetFilterPos err=0 currentPosition=0 04:17:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:35 Filter is already there-color wheel unchanged 04:17:35 Received message from Master: op=Shutter serial=104551 04:17:35 Shutter LASER close 04:17:35 Received message from Camera: op=State serial=104553 04:17:35 GetSingleValue result=40 Value=cccccccc 04:17:35 SkyScan query 04:17:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:17:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:36 Parameters OK 04:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:36 Set A/D data flow result=40 04:17:36 Set A/D channel type result=40 04:17:36 Set A/D encoding result=40 04:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:36 Set channel filter=0.000000e+000 result=40 04:17:36 Config A/D Result=40 04:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:36 Get A/D filter: -9.255963e+061 result=40 04:17:36 Get A/D value=-858993460 result=40 04:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:36 Parameters OK 04:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:36 Set A/D data flow result=40 04:17:36 Set A/D channel type result=40 04:17:36 Set A/D encoding result=40 04:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:36 Set channel filter=0.000000e+000 result=40 04:17:36 Config A/D Result=40 04:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:36 Get A/D filter: -9.255963e+061 result=40 04:17:36 Get A/D value=-858993460 result=40 04:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:36 Aux= 04:17:36 Message to Camera, serial 104553 queued 04:18:12 Received message from Master: op=PointingHead serial=104566 04:18:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:18:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:18:13 Point started: ret=0 04:18:13 point_skyscan result=0 04:18:14 Check angles 04:18:14 SkyScan query 04:18:14 SkyScan query done: ret=0 az=153.09<-10206 ze=8.745<-11417 Statuses=0009 0009 04:18:14 Msec=0 True Az=153.09 Ze=8.745 Az status=0009 Ze status=0009 04:18:14 Check angles 04:18:14 SkyScan query 04:18:15 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.63<-12842 Statuses=0009 0009 04:18:15 Msec=750 True Az=135.27 Ze=-12.63 Az status=0009 Ze status=0009 04:18:15 Check angles 04:18:15 SkyScan query 04:18:16 SkyScan query done: ret=0 az=117.39<-7826 ze=-34.065<-14271 Statuses=0009 0009 04:18:16 Msec=1500 True Az=117.39 Ze=-34.065 Az status=0009 Ze status=0009 04:18:16 Check angles 04:18:16 SkyScan query 04:18:16 SkyScan query done: ret=0 az=99.99<-6666 ze=-51.555<-15437 Statuses=0009 0009 04:18:16 Msec=2250 True Az=99.99 Ze=-51.555 Az status=0009 Ze status=0009 04:18:17 Check angles 04:18:17 SkyScan query 04:18:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 04:18:17 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 04:18:17 Check angles 04:18:17 SkyScan query 04:18:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:18:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:18:18 Message to Master queued w/err=0: serial=104566 error=0 04:18:23 Received message from Master: op=Filter serial=104567 04:18:23 Color wheel filter change from 0 to 0 04:18:23 FLIGetFilterPos err=0 currentPosition=0 04:18:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:23 Filter is already there-color wheel unchanged 04:18:23 Received message from Master: op=Shutter serial=104568 04:18:23 Shutter LASER close 04:18:23 Received message from Camera: op=State serial=104570 04:18:23 GetSingleValue result=40 Value=cccccccc 04:18:23 SkyScan query 04:18:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:18:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:24 Parameters OK 04:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:24 Set A/D data flow result=40 04:18:24 Set A/D channel type result=40 04:18:24 Set A/D encoding result=40 04:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:24 Set channel filter=0.000000e+000 result=40 04:18:24 Config A/D Result=40 04:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:24 Get A/D filter: -9.255963e+061 result=40 04:18:24 Get A/D value=-858993460 result=40 04:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:24 Parameters OK 04:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:24 Set A/D data flow result=40 04:18:24 Set A/D channel type result=40 04:18:24 Set A/D encoding result=40 04:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:24 Set channel filter=0.000000e+000 result=40 04:18:24 Config A/D Result=40 04:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:24 Get A/D filter: -9.255963e+061 result=40 04:18:24 Get A/D value=-858993460 result=40 04:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:24 Aux= 04:18:24 Message to Camera, serial 104570 queued 04:19:01 Received message from Master: op=PointingHead serial=104583 04:19:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:19:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:19:01 Point started: ret=0 04:19:01 point_skyscan result=0 04:19:02 Check angles 04:19:02 SkyScan query 04:19:02 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.6<-17440 Statuses=0009 0009 04:19:02 Msec=0 True Az=109.2 Ze=-81.6 Az status=0009 Ze status=0009 04:19:03 Check angles 04:19:03 SkyScan query 04:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.99<-18866 Statuses=0008 0009 04:19:03 Msec=750 True Az=112.995 Ze=-102.99 Az status=0008 Ze status=0009 04:19:03 Check angles 04:19:03 SkyScan query 04:19:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.945<-20263 Statuses=0008 0009 04:19:04 Msec=1500 True Az=112.995 Ze=-123.945 Az status=0008 Ze status=0009 04:19:04 Check angles 04:19:04 SkyScan query 04:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.885<-21659 Statuses=0008 0009 04:19:05 Msec=2250 True Az=112.995 Ze=-144.885 Az status=0008 Ze status=0009 04:19:05 Check angles 04:19:05 SkyScan query 04:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 04:19:05 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 04:19:06 Check angles 04:19:06 SkyScan query 04:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:19:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:19:06 Message to Master queued w/err=0: serial=104583 error=0 04:19:11 Received message from Master: op=Filter serial=104584 04:19:11 Color wheel filter change from 0 to 0 04:19:11 FLIGetFilterPos err=0 currentPosition=0 04:19:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:11 Filter is already there-color wheel unchanged 04:19:11 Received message from Master: op=Shutter serial=104585 04:19:11 Shutter LASER open 04:19:12 Received message from Camera: op=State serial=104587 04:19:12 GetSingleValue result=40 Value=cccccccc 04:19:12 SkyScan query 04:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:19:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:12 Parameters OK 04:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:12 Set A/D data flow result=40 04:19:12 Set A/D channel type result=40 04:19:12 Set A/D encoding result=40 04:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:12 Set channel filter=0.000000e+000 result=40 04:19:12 Config A/D Result=40 04:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:12 Get A/D filter: -9.255963e+061 result=40 04:19:12 Get A/D value=-858993460 result=40 04:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:12 Parameters OK 04:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:12 Set A/D data flow result=40 04:19:12 Set A/D channel type result=40 04:19:12 Set A/D encoding result=40 04:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:12 Set channel filter=0.000000e+000 result=40 04:19:12 Config A/D Result=40 04:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:12 Get A/D filter: -9.255963e+061 result=40 04:19:12 Get A/D value=-858993460 result=40 04:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:12 Aux= 04:19:12 Message to Camera, serial 104587 queued 04:19:21 Received message from Master: op=Shutter serial=104597 04:19:21 Shutter LASER close 04:19:21 Received message from Master: op=PointingHead serial=104601 04:19:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:19:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:19:21 Point started: ret=0 04:19:21 point_skyscan result=0 04:19:22 Check angles 04:19:22 SkyScan query 04:19:23 SkyScan query done: ret=0 az=89.895<-5993 ze=157.17<-1522 Statuses=0009 0009 04:19:23 Msec=0 True Az=89.895 Ze=157.17 Az status=0009 Ze status=0009 04:19:23 Check angles 04:19:23 SkyScan query 04:19:23 SkyScan query done: ret=0 az=72.015<-4801 ze=135.765<-2949 Statuses=0009 0009 04:19:23 Msec=750 True Az=72.015 Ze=135.765 Az status=0009 Ze status=0009 04:19:24 Check angles 04:19:24 SkyScan query 04:19:24 SkyScan query done: ret=0 az=54.69<-3646 ze=114.795<-4347 Statuses=0009 0009 04:19:24 Msec=1500 True Az=54.69 Ze=114.795 Az status=0009 Ze status=0009 04:19:24 Check angles 04:19:24 SkyScan query 04:19:25 SkyScan query done: ret=0 az=40.89<-2726 ze=93.84<-5744 Statuses=0009 0009 04:19:25 Msec=2250 True Az=40.89 Ze=93.84 Az status=0009 Ze status=0009 04:19:25 Check angles 04:19:25 SkyScan query 04:19:26 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 04:19:26 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 04:19:26 Check angles 04:19:26 SkyScan query 04:19:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 04:19:26 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 04:19:27 Check angles 04:19:27 SkyScan query 04:19:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:19:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:19:27 Message to Master queued w/err=0: serial=104601 error=0 04:19:32 Received message from Master: op=Filter serial=104602 04:19:32 Color wheel filter change from 0 to 0 04:19:32 FLIGetFilterPos err=0 currentPosition=0 04:19:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:32 Filter is already there-color wheel unchanged 04:19:32 Received message from Master: op=Shutter serial=104603 04:19:32 Shutter LASER close 04:19:32 Received message from Camera: op=State serial=104605 04:19:32 GetSingleValue result=40 Value=cccccccc 04:19:32 SkyScan query 04:19:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:19:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:33 Parameters OK 04:19:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:33 Set A/D data flow result=40 04:19:33 Set A/D channel type result=40 04:19:33 Set A/D encoding result=40 04:19:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:33 Set channel filter=0.000000e+000 result=40 04:19:33 Config A/D Result=40 04:19:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:33 Get A/D filter: -9.255963e+061 result=40 04:19:33 Get A/D value=-858993460 result=40 04:19:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:33 Parameters OK 04:19:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:33 Set A/D data flow result=40 04:19:33 Set A/D channel type result=40 04:19:33 Set A/D encoding result=40 04:19:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:33 Set channel filter=0.000000e+000 result=40 04:19:33 Config A/D Result=40 04:19:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:33 Get A/D filter: -9.255963e+061 result=40 04:19:33 Get A/D value=-858993460 result=40 04:19:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:33 Aux= 04:19:33 Message to Camera, serial 104605 queued 04:20:10 Received message from Master: op=PointingHead serial=104618 04:20:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:20:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:20:10 Point started: ret=0 04:20:10 point_skyscan result=0 04:20:11 Check angles 04:20:11 SkyScan query 04:20:12 SkyScan query done: ret=0 az=63.945<-4263 ze=66.57<-7562 Statuses=0009 0008 04:20:12 Msec=0 True Az=63.945 Ze=66.57 Az status=0009 Ze status=0008 04:20:12 Check angles 04:20:12 SkyScan query 04:20:12 SkyScan query done: ret=0 az=81.315<-5421 ze=66.51<-7566 Statuses=0009 0008 04:20:12 Msec=750 True Az=81.315 Ze=66.51 Az status=0009 Ze status=0008 04:20:12 Check angles 04:20:12 SkyScan query 04:20:13 SkyScan query done: ret=0 az=98.88<-6592 ze=66.51<-7566 Statuses=0009 0008 04:20:13 Msec=1500 True Az=98.88 Ze=66.51 Az status=0009 Ze status=0008 04:20:13 Check angles 04:20:13 SkyScan query 04:20:14 SkyScan query done: ret=0 az=116.46<-7764 ze=66.51<-7566 Statuses=0009 0008 04:20:14 Msec=2250 True Az=116.46 Ze=66.51 Az status=0009 Ze status=0008 04:20:14 Check angles 04:20:14 SkyScan query 04:20:15 SkyScan query done: ret=0 az=133.98<-8932 ze=66.51<-7566 Statuses=0009 0008 04:20:15 Msec=3000 True Az=133.98 Ze=66.51 Az status=0009 Ze status=0008 04:20:15 Check angles 04:20:15 SkyScan query 04:20:15 SkyScan query done: ret=0 az=151.305<-10087 ze=66.51<-7566 Statuses=0009 0008 04:20:15 Msec=3750 True Az=151.305 Ze=66.51 Az status=0009 Ze status=0008 04:20:15 Check angles 04:20:15 SkyScan query 04:20:16 SkyScan query done: ret=0 az=157.98<-10532 ze=66.51<-7566 Statuses=0008 0008 04:20:16 Msec=4500 True Az=157.98 Ze=66.51 Az status=0008 Ze status=0008 04:20:16 Message to Master queued w/err=0: serial=104618 error=0 04:20:21 Received message from Master: op=Filter serial=104619 04:20:21 Color wheel filter change from 0 to 0 04:20:21 FLIGetFilterPos err=0 currentPosition=0 04:20:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:21 Filter is already there-color wheel unchanged 04:20:21 Received message from Master: op=Shutter serial=104620 04:20:21 Shutter LASER close 04:20:21 Received message from Camera: op=State serial=104622 04:20:21 GetSingleValue result=40 Value=cccccccc 04:20:21 SkyScan query 04:20:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 04:20:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:22 Parameters OK 04:20:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:22 Set A/D data flow result=40 04:20:22 Set A/D channel type result=40 04:20:22 Set A/D encoding result=40 04:20:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:22 Set channel filter=0.000000e+000 result=40 04:20:22 Config A/D Result=40 04:20:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:22 Get A/D filter: -9.255963e+061 result=40 04:20:22 Get A/D value=-858993460 result=40 04:20:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:22 Parameters OK 04:20:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:22 Set A/D data flow result=40 04:20:22 Set A/D channel type result=40 04:20:22 Set A/D encoding result=40 04:20:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:22 Set channel filter=0.000000e+000 result=40 04:20:22 Config A/D Result=40 04:20:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:22 Get A/D filter: -9.255963e+061 result=40 04:20:22 Get A/D value=-858993460 result=40 04:20:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:22 Aux= 04:20:22 Message to Camera, serial 104622 queued 04:20:59 Received message from Master: op=PointingHead serial=104635 04:20:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:20:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:20:59 Point started: ret=0 04:20:59 point_skyscan result=0 04:21:00 Check angles 04:21:00 SkyScan query 04:21:00 SkyScan query done: ret=0 az=135.09<-9006 ze=36.825<-9545 Statuses=0009 0009 04:21:00 Msec=0 True Az=135.09 Ze=36.825 Az status=0009 Ze status=0009 04:21:00 Check angles 04:21:00 SkyScan query 04:21:01 SkyScan query done: ret=0 az=117.66<-7844 ze=15.9<-10940 Statuses=0009 0009 04:21:01 Msec=750 True Az=117.66 Ze=15.9 Az status=0009 Ze status=0009 04:21:01 Check angles 04:21:01 SkyScan query 04:21:02 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.1<-12340 Statuses=0009 0009 04:21:02 Msec=1500 True Az=100.2 Ze=-5.1 Az status=0009 Ze status=0009 04:21:02 Check angles 04:21:02 SkyScan query 04:21:03 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.43<-13762 Statuses=0009 0009 04:21:03 Msec=2250 True Az=82.275 Ze=-26.43 Az status=0009 Ze status=0009 04:21:03 Check angles 04:21:03 SkyScan query 04:21:03 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.565<-14571 Statuses=0009 0008 04:21:03 Msec=3000 True Az=64.845 Ze=-38.565 Az status=0009 Ze status=0008 04:21:03 Check angles 04:21:03 SkyScan query 04:21:04 SkyScan query done: ret=0 az=47.43<-3162 ze=-38.535<-14569 Statuses=0009 0008 04:21:04 Msec=3750 True Az=47.43 Ze=-38.535 Az status=0009 Ze status=0008 04:21:04 Check angles 04:21:04 SkyScan query 04:21:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:21:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:21:05 Message to Master queued w/err=0: serial=104635 error=0 04:21:10 Received message from Master: op=Filter serial=104636 04:21:10 Color wheel filter change from 0 to 0 04:21:10 FLIGetFilterPos err=0 currentPosition=0 04:21:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:10 Filter is already there-color wheel unchanged 04:21:10 Received message from Master: op=Shutter serial=104637 04:21:10 Shutter LASER close 04:21:10 Received message from Camera: op=State serial=104639 04:21:10 GetSingleValue result=40 Value=cccccccc 04:21:10 SkyScan query 04:21:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:21:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:11 Parameters OK 04:21:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:11 Set A/D data flow result=40 04:21:11 Set A/D channel type result=40 04:21:11 Set A/D encoding result=40 04:21:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:11 Set channel filter=0.000000e+000 result=40 04:21:11 Config A/D Result=40 04:21:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:11 Get A/D filter: -9.255963e+061 result=40 04:21:11 Get A/D value=-858993460 result=40 04:21:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:11 Parameters OK 04:21:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:11 Set A/D data flow result=40 04:21:11 Set A/D channel type result=40 04:21:11 Set A/D encoding result=40 04:21:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:11 Set channel filter=0.000000e+000 result=40 04:21:11 Config A/D Result=40 04:21:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:11 Get A/D filter: -9.255963e+061 result=40 04:21:11 Get A/D value=-858993460 result=40 04:21:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:11 Aux= 04:21:11 Message to Camera, serial 104639 queued 04:21:47 Received message from Master: op=PointingHead serial=104652 04:21:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:21:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:21:48 Point started: ret=0 04:21:48 point_skyscan result=0 04:21:49 Check angles 04:21:49 SkyScan query 04:21:49 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.205<-16547 Statuses=0009 0009 04:21:49 Msec=0 True Az=63.93 Ze=-68.205 Az status=0009 Ze status=0009 04:21:49 Check angles 04:21:49 SkyScan query 04:21:50 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.205<-17947 Statuses=0009 0009 04:21:50 Msec=750 True Az=81.3 Ze=-89.205 Az status=0009 Ze status=0009 04:21:50 Check angles 04:21:50 SkyScan query 04:21:51 SkyScan query done: ret=0 az=98.835<-6589 ze=-110.13<-19342 Statuses=0009 0009 04:21:51 Msec=1500 True Az=98.835 Ze=-110.13 Az status=0009 Ze status=0009 04:21:51 Check angles 04:21:51 SkyScan query 04:21:51 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.1<-20740 Statuses=0009 0009 04:21:51 Msec=2250 True Az=116.445 Ze=-131.1 Az status=0009 Ze status=0009 04:21:52 Check angles 04:21:52 SkyScan query 04:21:52 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 04:21:52 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 04:21:52 Check angles 04:21:52 SkyScan query 04:21:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:21:53 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:21:53 Message to Master queued w/err=0: serial=104652 error=0 04:21:58 Received message from Master: op=Filter serial=104653 04:21:58 Color wheel filter change from 0 to 0 04:21:58 FLIGetFilterPos err=0 currentPosition=0 04:21:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:58 Filter is already there-color wheel unchanged 04:21:58 Received message from Master: op=Shutter serial=104654 04:21:58 Shutter LASER close 04:21:58 Received message from Camera: op=State serial=104656 04:21:58 GetSingleValue result=40 Value=cccccccc 04:21:58 SkyScan query 04:21:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:21:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:59 Parameters OK 04:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:59 Set A/D data flow result=40 04:21:59 Set A/D channel type result=40 04:21:59 Set A/D encoding result=40 04:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:59 Set channel filter=0.000000e+000 result=40 04:21:59 Config A/D Result=40 04:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:59 Get A/D filter: -9.255963e+061 result=40 04:21:59 Get A/D value=-858993460 result=40 04:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:59 Parameters OK 04:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:59 Set A/D data flow result=40 04:21:59 Set A/D channel type result=40 04:21:59 Set A/D encoding result=40 04:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:59 Set channel filter=0.000000e+000 result=40 04:21:59 Config A/D Result=40 04:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:59 Get A/D filter: -9.255963e+061 result=40 04:21:59 Get A/D value=-858993460 result=40 04:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:59 Aux= 04:21:59 Message to Camera, serial 104656 queued 04:22:35 Received message from Master: op=PointingHead serial=104669 04:22:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:22:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:22:36 Point started: ret=0 04:22:36 point_skyscan result=0 04:22:37 Check angles 04:22:37 SkyScan query 04:22:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.465<-23431 Statuses=0009 0009 04:22:37 Msec=0 True Az=113.01 Ze=-171.465 Az status=0009 Ze status=0009 04:22:37 Check angles 04:22:37 SkyScan query 04:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:22:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:22:38 Message to Master queued w/err=0: serial=104669 error=0 04:22:43 Received message from Master: op=Filter serial=104670 04:22:43 Color wheel filter change from 0 to 0 04:22:43 FLIGetFilterPos err=0 currentPosition=0 04:22:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:43 Filter is already there-color wheel unchanged 04:22:43 Received message from Master: op=Shutter serial=104671 04:22:43 Shutter LASER open 04:22:43 Received message from Camera: op=State serial=104673 04:22:43 GetSingleValue result=40 Value=cccccccc 04:22:43 SkyScan query 04:22:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:22:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:44 Parameters OK 04:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:44 Set A/D data flow result=40 04:22:44 Set A/D channel type result=40 04:22:44 Set A/D encoding result=40 04:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:44 Set channel filter=0.000000e+000 result=40 04:22:44 Config A/D Result=40 04:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:44 Get A/D filter: -9.255963e+061 result=40 04:22:44 Get A/D value=-858993460 result=40 04:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:44 Parameters OK 04:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:44 Set A/D data flow result=40 04:22:44 Set A/D channel type result=40 04:22:44 Set A/D encoding result=40 04:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:44 Set channel filter=0.000000e+000 result=40 04:22:44 Config A/D Result=40 04:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:44 Get A/D filter: -9.255963e+061 result=40 04:22:44 Get A/D value=-858993460 result=40 04:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:44 Aux= 04:22:44 Message to Camera, serial 104673 queued 04:22:52 Received message from Master: op=Shutter serial=104683 04:22:52 Shutter LASER close 04:22:53 Received message from Master: op=PointingHead serial=104687 04:22:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:22:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:22:53 Point started: ret=0 04:22:53 point_skyscan result=0 04:22:54 Check angles 04:22:54 SkyScan query 04:22:55 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.445<-21563 Statuses=0009 0009 04:22:55 Msec=0 True Az=135.765 Ze=-143.445 Az status=0009 Ze status=0009 04:22:55 Check angles 04:22:55 SkyScan query 04:22:55 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.49<-20166 Statuses=0009 0009 04:22:55 Msec=750 True Az=153.36 Ze=-122.49 Az status=0009 Ze status=0009 04:22:56 Check angles 04:22:56 SkyScan query 04:22:56 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.58<-18772 Statuses=0009 0009 04:22:56 Msec=1500 True Az=170.745 Ze=-101.58 Az status=0009 Ze status=0009 04:22:56 Check angles 04:22:56 SkyScan query 04:22:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.565<-17371 Statuses=0008 0009 04:22:57 Msec=2250 True Az=176.01 Ze=-80.565 Az status=0008 Ze status=0009 04:22:57 Check angles 04:22:57 SkyScan query 04:22:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.625<-15975 Statuses=0008 0009 04:22:58 Msec=3000 True Az=176.01 Ze=-59.625 Az status=0008 Ze status=0009 04:22:58 Check angles 04:22:58 SkyScan query 04:22:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:22:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:22:58 Message to Master queued w/err=0: serial=104687 error=0 04:23:03 Received message from Master: op=Filter serial=104688 04:23:03 Color wheel filter change from 0 to 0 04:23:03 FLIGetFilterPos err=0 currentPosition=0 04:23:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:03 Filter is already there-color wheel unchanged 04:23:04 Received message from Master: op=Shutter serial=104689 04:23:04 Shutter LASER close 04:23:04 Received message from Camera: op=State serial=104691 04:23:04 GetSingleValue result=40 Value=cccccccc 04:23:04 SkyScan query 04:23:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:23:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:04 Parameters OK 04:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:04 Set A/D data flow result=40 04:23:04 Set A/D channel type result=40 04:23:04 Set A/D encoding result=40 04:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:04 Set channel filter=0.000000e+000 result=40 04:23:04 Config A/D Result=40 04:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:04 Get A/D filter: -9.255963e+061 result=40 04:23:04 Get A/D value=-858993460 result=40 04:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:04 Parameters OK 04:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:04 Set A/D data flow result=40 04:23:04 Set A/D channel type result=40 04:23:04 Set A/D encoding result=40 04:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:04 Set channel filter=0.000000e+000 result=40 04:23:04 Config A/D Result=40 04:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:04 Get A/D filter: -9.255963e+061 result=40 04:23:04 Get A/D value=-858993460 result=40 04:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:04 Aux= 04:23:04 Message to Camera, serial 104691 queued 04:23:41 Received message from Master: op=PointingHead serial=104704 04:23:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:23:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:23:42 Point started: ret=0 04:23:42 point_skyscan result=0 04:23:42 Check angles 04:23:42 SkyScan query 04:23:43 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.005<-13467 Statuses=0009 0009 04:23:43 Msec=0 True Az=153.195 Ze=-22.005 Az status=0009 Ze status=0009 04:23:43 Check angles 04:23:43 SkyScan query 04:23:44 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.005<-12067 Statuses=0009 0009 04:23:44 Msec=750 True Az=135.795 Ze=-1.005 Az status=0009 Ze status=0009 04:23:44 Check angles 04:23:44 SkyScan query 04:23:44 SkyScan query done: ret=0 az=118.215<-7881 ze=19.935<-10671 Statuses=0009 0009 04:23:44 Msec=1500 True Az=118.215 Ze=19.935 Az status=0009 Ze status=0009 04:23:45 Check angles 04:23:45 SkyScan query 04:23:45 SkyScan query done: ret=0 az=100.815<-6721 ze=40.89<-9274 Statuses=0009 0009 04:23:45 Msec=2250 True Az=100.815 Ze=40.89 Az status=0009 Ze status=0009 04:23:45 Check angles 04:23:45 SkyScan query 04:23:46 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 04:23:46 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 04:23:46 Check angles 04:23:46 SkyScan query 04:23:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:23:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:23:47 Message to Master queued w/err=0: serial=104704 error=0 04:23:52 Received message from Master: op=Filter serial=104705 04:23:52 Color wheel filter change from 0 to 0 04:23:52 FLIGetFilterPos err=0 currentPosition=0 04:23:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:52 Filter is already there-color wheel unchanged 04:23:52 Received message from Master: op=Shutter serial=104706 04:23:52 Shutter LASER close 04:23:52 Received message from Camera: op=State serial=104708 04:23:52 GetSingleValue result=40 Value=cccccccc 04:23:52 SkyScan query 04:23:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:23:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:52 Parameters OK 04:23:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:52 Set A/D data flow result=40 04:23:52 Set A/D channel type result=40 04:23:52 Set A/D encoding result=40 04:23:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:52 Set channel filter=0.000000e+000 result=40 04:23:52 Config A/D Result=40 04:23:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:52 Get A/D filter: -9.255963e+061 result=40 04:23:52 Get A/D value=-858993460 result=40 04:23:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:52 Parameters OK 04:23:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:52 Set A/D data flow result=40 04:23:52 Set A/D channel type result=40 04:23:52 Set A/D encoding result=40 04:23:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:52 Set channel filter=0.000000e+000 result=40 04:23:52 Config A/D Result=40 04:23:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:52 Get A/D filter: -9.255963e+061 result=40 04:23:52 Get A/D value=-858993460 result=40 04:23:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:52 Aux= 04:23:52 Message to Camera, serial 104708 queued 04:24:29 Received message from Master: op=PointingHead serial=104721 04:24:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:24:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:24:30 Point started: ret=0 04:24:30 point_skyscan result=0 04:24:30 Check angles 04:24:30 SkyScan query 04:24:31 SkyScan query done: ret=0 az=109.575<-7305 ze=38.49<-9434 Statuses=0009 0008 04:24:31 Msec=0 True Az=109.575 Ze=38.49 Az status=0009 Ze status=0008 04:24:31 Check angles 04:24:31 SkyScan query 04:24:32 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 04:24:32 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 04:24:32 Check angles 04:24:32 SkyScan query 04:24:32 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 04:24:32 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 04:24:33 Check angles 04:24:33 SkyScan query 04:24:33 SkyScan query done: ret=0 az=162.33<-10822 ze=38.505<-9433 Statuses=0009 0008 04:24:33 Msec=2250 True Az=162.33 Ze=38.505 Az status=0009 Ze status=0008 04:24:33 Check angles 04:24:33 SkyScan query 04:24:34 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:24:34 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:24:34 Check angles 04:24:34 SkyScan query 04:24:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:24:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:24:35 Message to Master queued w/err=0: serial=104721 error=0 04:24:40 Received message from Master: op=Filter serial=104722 04:24:40 Color wheel filter change from 0 to 0 04:24:40 FLIGetFilterPos err=0 currentPosition=0 04:24:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:40 Filter is already there-color wheel unchanged 04:24:40 Received message from Master: op=Shutter serial=104723 04:24:40 Shutter LASER close 04:24:40 Received message from Camera: op=State serial=104725 04:24:40 GetSingleValue result=40 Value=cccccccc 04:24:40 SkyScan query 04:24:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:24:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:40 Parameters OK 04:24:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:40 Set A/D data flow result=40 04:24:40 Set A/D channel type result=40 04:24:40 Set A/D encoding result=40 04:24:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:40 Set channel filter=0.000000e+000 result=40 04:24:40 Config A/D Result=40 04:24:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:40 Get A/D filter: -9.255963e+061 result=40 04:24:40 Get A/D value=-858993460 result=40 04:24:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:40 Parameters OK 04:24:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:40 Set A/D data flow result=40 04:24:40 Set A/D channel type result=40 04:24:40 Set A/D encoding result=40 04:24:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:40 Set channel filter=0.000000e+000 result=40 04:24:40 Config A/D Result=40 04:24:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:40 Get A/D filter: -9.255963e+061 result=40 04:24:40 Get A/D value=-858993460 result=40 04:24:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:40 Aux= 04:24:40 Message to Camera, serial 104725 queued 04:25:17 Received message from Master: op=PointingHead serial=104738 04:25:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:25:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:25:18 Point started: ret=0 04:25:18 point_skyscan result=0 04:25:18 Check angles 04:25:18 SkyScan query 04:25:19 SkyScan query done: ret=0 az=152.955<-10197 ze=8.775<-11415 Statuses=0009 0009 04:25:19 Msec=0 True Az=152.955 Ze=8.775 Az status=0009 Ze status=0009 04:25:19 Check angles 04:25:19 SkyScan query 04:25:20 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.18<-12812 Statuses=0009 0009 04:25:20 Msec=750 True Az=135.405 Ze=-12.18 Az status=0009 Ze status=0009 04:25:20 Check angles 04:25:20 SkyScan query 04:25:21 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.105<-14207 Statuses=0009 0009 04:25:21 Msec=1500 True Az=118.02 Ze=-33.105 Az status=0009 Ze status=0009 04:25:21 Check angles 04:25:21 SkyScan query 04:25:21 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.525<-15435 Statuses=0009 0009 04:25:21 Msec=2250 True Az=100.62 Ze=-51.525 Az status=0009 Ze status=0009 04:25:21 Check angles 04:25:21 SkyScan query 04:25:22 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 04:25:22 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 04:25:22 Check angles 04:25:22 SkyScan query 04:25:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:25:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:25:23 Message to Master queued w/err=0: serial=104738 error=0 04:25:28 Received message from Master: op=Filter serial=104739 04:25:28 Color wheel filter change from 0 to 0 04:25:28 FLIGetFilterPos err=0 currentPosition=0 04:25:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:28 Filter is already there-color wheel unchanged 04:25:28 Received message from Master: op=Shutter serial=104740 04:25:28 Shutter LASER close 04:25:28 Received message from Camera: op=State serial=104742 04:25:28 GetSingleValue result=40 Value=cccccccc 04:25:28 SkyScan query 04:25:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:25:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:29 Parameters OK 04:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:29 Set A/D data flow result=40 04:25:29 Set A/D channel type result=40 04:25:29 Set A/D encoding result=40 04:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:29 Set channel filter=0.000000e+000 result=40 04:25:29 Config A/D Result=40 04:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:29 Get A/D filter: -9.255963e+061 result=40 04:25:29 Get A/D value=-858993460 result=40 04:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:29 Parameters OK 04:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:29 Set A/D data flow result=40 04:25:29 Set A/D channel type result=40 04:25:29 Set A/D encoding result=40 04:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:29 Set channel filter=0.000000e+000 result=40 04:25:29 Config A/D Result=40 04:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:29 Get A/D filter: -9.255963e+061 result=40 04:25:29 Get A/D value=-858993460 result=40 04:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:29 Aux= 04:25:29 Message to Camera, serial 104742 queued 04:26:05 Received message from Master: op=PointingHead serial=104755 04:26:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:26:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:26:06 Point started: ret=0 04:26:06 point_skyscan result=0 04:26:06 Check angles 04:26:06 SkyScan query 04:26:07 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.045<-17403 Statuses=0009 0009 04:26:07 Msec=0 True Az=108.825 Ze=-81.045 Az status=0009 Ze status=0009 04:26:07 Check angles 04:26:07 SkyScan query 04:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 04:26:08 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 04:26:08 Check angles 04:26:08 SkyScan query 04:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.375<-20225 Statuses=0008 0009 04:26:09 Msec=1500 True Az=112.995 Ze=-123.375 Az status=0008 Ze status=0009 04:26:09 Check angles 04:26:09 SkyScan query 04:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 04:26:09 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 04:26:09 Check angles 04:26:09 SkyScan query 04:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 04:26:10 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 04:26:10 Check angles 04:26:10 SkyScan query 04:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:26:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:26:11 Message to Master queued w/err=0: serial=104755 error=0 [UTC 2018-12-13 04:26:16] 04:26:16 Received message from Master: op=Filter serial=104756 04:26:16 Color wheel filter change from 0 to 0 04:26:16 FLIGetFilterPos err=0 currentPosition=0 04:26:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:16 Filter is already there-color wheel unchanged 04:26:16 Received message from Master: op=Shutter serial=104757 04:26:16 Shutter LASER open 04:26:16 Received message from Camera: op=State serial=104759 04:26:16 GetSingleValue result=40 Value=cccccccc 04:26:16 SkyScan query 04:26:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:26:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:17 Parameters OK 04:26:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:17 Set A/D data flow result=40 04:26:17 Set A/D channel type result=40 04:26:17 Set A/D encoding result=40 04:26:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:17 Set channel filter=0.000000e+000 result=40 04:26:17 Config A/D Result=40 04:26:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:17 Get A/D filter: -9.255963e+061 result=40 04:26:17 Get A/D value=-858993460 result=40 04:26:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:17 Parameters OK 04:26:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:17 Set A/D data flow result=40 04:26:17 Set A/D channel type result=40 04:26:17 Set A/D encoding result=40 04:26:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:17 Set channel filter=0.000000e+000 result=40 04:26:17 Config A/D Result=40 04:26:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:17 Get A/D filter: -9.255963e+061 result=40 04:26:17 Get A/D value=-858993460 result=40 04:26:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:17 Aux= 04:26:17 Message to Camera, serial 104759 queued 04:26:25 Received message from Master: op=Shutter serial=104769 04:26:25 Shutter LASER close 04:26:26 Received message from Master: op=PointingHead serial=104773 04:26:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:26:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:26:26 Point started: ret=0 04:26:26 point_skyscan result=0 04:26:27 Check angles 04:26:27 SkyScan query 04:26:27 SkyScan query done: ret=0 az=90.105<-6007 ze=157.455<-1503 Statuses=0009 0009 04:26:27 Msec=0 True Az=90.105 Ze=157.455 Az status=0009 Ze status=0009 04:26:28 Check angles 04:26:28 SkyScan query 04:26:28 SkyScan query done: ret=0 az=72.27<-4818 ze=136.035<-2931 Statuses=0009 0009 04:26:28 Msec=750 True Az=72.27 Ze=136.035 Az status=0009 Ze status=0009 04:26:28 Check angles 04:26:28 SkyScan query 04:26:29 SkyScan query done: ret=0 az=54.81<-3654 ze=115.11<-4326 Statuses=0009 0009 04:26:29 Msec=1500 True Az=54.81 Ze=115.11 Az status=0009 Ze status=0009 04:26:29 Check angles 04:26:29 SkyScan query 04:26:30 SkyScan query done: ret=0 az=40.92<-2728 ze=93.69<-5754 Statuses=0009 0009 04:26:30 Msec=2250 True Az=40.92 Ze=93.69 Az status=0009 Ze status=0009 04:26:30 Check angles 04:26:30 SkyScan query 04:26:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 04:26:30 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 04:26:31 Check angles 04:26:31 SkyScan query 04:26:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 04:26:31 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 04:26:31 Check angles 04:26:31 SkyScan query 04:26:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:26:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:26:32 Message to Master queued w/err=0: serial=104773 error=0 04:26:37 Received message from Master: op=Filter serial=104774 04:26:37 Color wheel filter change from 0 to 0 04:26:37 FLIGetFilterPos err=0 currentPosition=0 04:26:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:37 Filter is already there-color wheel unchanged 04:26:37 Received message from Master: op=Shutter serial=104775 04:26:37 Shutter LASER close 04:26:37 Received message from Camera: op=State serial=104777 04:26:37 GetSingleValue result=40 Value=cccccccc 04:26:37 SkyScan query 04:26:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:26:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:38 Parameters OK 04:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:38 Set A/D data flow result=40 04:26:38 Set A/D channel type result=40 04:26:38 Set A/D encoding result=40 04:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:38 Set channel filter=0.000000e+000 result=40 04:26:38 Config A/D Result=40 04:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:38 Get A/D filter: -9.255963e+061 result=40 04:26:38 Get A/D value=-858993460 result=40 04:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:38 Parameters OK 04:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:38 Set A/D data flow result=40 04:26:38 Set A/D channel type result=40 04:26:38 Set A/D encoding result=40 04:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:38 Set channel filter=0.000000e+000 result=40 04:26:38 Config A/D Result=40 04:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:38 Get A/D filter: -9.255963e+061 result=40 04:26:38 Get A/D value=-858993460 result=40 04:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:38 Aux= 04:26:38 Message to Camera, serial 104777 queued 04:27:15 Received message from Master: op=PointingHead serial=104790 04:27:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:27:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:27:15 Point started: ret=0 04:27:15 point_skyscan result=0 04:27:16 Check angles 04:27:16 SkyScan query 04:27:16 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 04:27:16 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 04:27:16 Check angles 04:27:16 SkyScan query 04:27:17 SkyScan query done: ret=0 az=81.765<-5451 ze=66.495<-7567 Statuses=0009 0008 04:27:17 Msec=750 True Az=81.765 Ze=66.495 Az status=0009 Ze status=0008 04:27:17 Check angles 04:27:17 SkyScan query 04:27:18 SkyScan query done: ret=0 az=99.825<-6655 ze=66.495<-7567 Statuses=0009 0008 04:27:18 Msec=1500 True Az=99.825 Ze=66.495 Az status=0009 Ze status=0008 04:27:18 Check angles 04:27:18 SkyScan query 04:27:19 SkyScan query done: ret=0 az=117.585<-7839 ze=66.495<-7567 Statuses=0009 0008 04:27:19 Msec=2250 True Az=117.585 Ze=66.495 Az status=0009 Ze status=0008 04:27:19 Check angles 04:27:19 SkyScan query 04:27:19 SkyScan query done: ret=0 az=135.315<-9021 ze=66.495<-7567 Statuses=0009 0008 04:27:19 Msec=3000 True Az=135.315 Ze=66.495 Az status=0009 Ze status=0008 04:27:20 Check angles 04:27:20 SkyScan query 04:27:20 SkyScan query done: ret=0 az=152.91<-10194 ze=66.495<-7567 Statuses=0009 0008 04:27:20 Msec=3750 True Az=152.91 Ze=66.495 Az status=0009 Ze status=0008 04:27:20 Check angles 04:27:20 SkyScan query 04:27:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:27:21 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:27:21 Message to Master queued w/err=0: serial=104790 error=0 04:27:26 Received message from Master: op=Filter serial=104791 04:27:26 Color wheel filter change from 0 to 0 04:27:26 FLIGetFilterPos err=0 currentPosition=0 04:27:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:26 Filter is already there-color wheel unchanged 04:27:26 Received message from Master: op=Shutter serial=104792 04:27:26 Shutter LASER close 04:27:26 Received message from Camera: op=State serial=104794 04:27:26 GetSingleValue result=40 Value=cccccccc 04:27:26 SkyScan query 04:27:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:27:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:27 Parameters OK 04:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:27 Set A/D data flow result=40 04:27:27 Set A/D channel type result=40 04:27:27 Set A/D encoding result=40 04:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:27 Set channel filter=0.000000e+000 result=40 04:27:27 Config A/D Result=40 04:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:27 Get A/D filter: -9.255963e+061 result=40 04:27:27 Get A/D value=-858993460 result=40 04:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:27 Parameters OK 04:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:27 Set A/D data flow result=40 04:27:27 Set A/D channel type result=40 04:27:27 Set A/D encoding result=40 04:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:27 Set channel filter=0.000000e+000 result=40 04:27:27 Config A/D Result=40 04:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:27 Get A/D filter: -9.255963e+061 result=40 04:27:27 Get A/D value=-858993460 result=40 04:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:27 Aux= 04:27:27 Message to Camera, serial 104794 queued 04:28:03 Received message from Master: op=PointingHead serial=104806 04:28:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:28:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:28:03 Point started: ret=0 04:28:03 point_skyscan result=0 04:28:04 Check angles 04:28:04 SkyScan query 04:28:04 SkyScan query done: ret=0 az=134.79<-8986 ze=36.48<-9568 Statuses=0009 0009 04:28:04 Msec=0 True Az=134.79 Ze=36.48 Az status=0009 Ze status=0009 04:28:04 Check angles 04:28:04 SkyScan query 04:28:05 SkyScan query done: ret=0 az=117.33<-7822 ze=15.57<-10962 Statuses=0009 0009 04:28:05 Msec=750 True Az=117.33 Ze=15.57 Az status=0009 Ze status=0009 04:28:05 Check angles 04:28:05 SkyScan query 04:28:06 SkyScan query done: ret=0 az=99.99<-6666 ze=-5.43<-12362 Statuses=0009 0009 04:28:06 Msec=1500 True Az=99.99 Ze=-5.43 Az status=0009 Ze status=0009 04:28:06 Check angles 04:28:06 SkyScan query 04:28:07 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.37<-13758 Statuses=0009 0009 04:28:07 Msec=2250 True Az=82.44 Ze=-26.37 Az status=0009 Ze status=0009 04:28:07 Check angles 04:28:07 SkyScan query 04:28:07 SkyScan query done: ret=0 az=64.905<-4327 ze=-38.565<-14571 Statuses=0009 0008 04:28:07 Msec=3000 True Az=64.905 Ze=-38.565 Az status=0009 Ze status=0008 04:28:07 Check angles 04:28:07 SkyScan query 04:28:08 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.535<-14569 Statuses=0009 0008 04:28:08 Msec=3750 True Az=47.415 Ze=-38.535 Az status=0009 Ze status=0008 04:28:08 Check angles 04:28:08 SkyScan query 04:28:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:28:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:28:09 Message to Master queued w/err=0: serial=104806 error=0 04:28:14 Received message from Master: op=Filter serial=104807 04:28:14 Color wheel filter change from 0 to 0 04:28:14 FLIGetFilterPos err=0 currentPosition=0 04:28:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:14 Filter is already there-color wheel unchanged 04:28:14 Received message from Master: op=Shutter serial=104808 04:28:14 Shutter LASER close 04:28:14 Received message from Camera: op=State serial=104810 04:28:14 GetSingleValue result=40 Value=cccccccc 04:28:14 SkyScan query 04:28:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:28:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:15 Parameters OK 04:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:15 Set A/D data flow result=40 04:28:15 Set A/D channel type result=40 04:28:15 Set A/D encoding result=40 04:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:15 Set channel filter=0.000000e+000 result=40 04:28:15 Config A/D Result=40 04:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:15 Get A/D filter: -9.255963e+061 result=40 04:28:15 Get A/D value=-858993460 result=40 04:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:15 Parameters OK 04:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:15 Set A/D data flow result=40 04:28:15 Set A/D channel type result=40 04:28:15 Set A/D encoding result=40 04:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:15 Set channel filter=0.000000e+000 result=40 04:28:15 Config A/D Result=40 04:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:15 Get A/D filter: -9.255963e+061 result=40 04:28:15 Get A/D value=-858993460 result=40 04:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:15 Aux= 04:28:15 Message to Camera, serial 104810 queued 04:28:51 Received message from Master: op=PointingHead serial=104823 04:28:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:28:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:28:52 Point started: ret=0 04:28:52 point_skyscan result=0 04:28:52 Check angles 04:28:52 SkyScan query 04:28:53 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.46<-16564 Statuses=0009 0009 04:28:53 Msec=0 True Az=64.215 Ze=-68.46 Az status=0009 Ze status=0009 04:28:53 Check angles 04:28:53 SkyScan query 04:28:54 SkyScan query done: ret=0 az=81.525<-5435 ze=-89.43<-17962 Statuses=0009 0009 04:28:54 Msec=750 True Az=81.525 Ze=-89.43 Az status=0009 Ze status=0009 04:28:54 Check angles 04:28:54 SkyScan query 04:28:55 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.385<-19359 Statuses=0009 0009 04:28:55 Msec=1500 True Az=99.105 Ze=-110.385 Az status=0009 Ze status=0009 04:28:55 Check angles 04:28:55 SkyScan query 04:28:55 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.325<-20755 Statuses=0009 0009 04:28:55 Msec=2250 True Az=116.64 Ze=-131.325 Az status=0009 Ze status=0009 04:28:55 Check angles 04:28:55 SkyScan query 04:28:56 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.555<-21437 Statuses=0009 0008 04:28:56 Msec=3000 True Az=131.145 Ze=-141.555 Az status=0009 Ze status=0008 04:28:56 Check angles 04:28:56 SkyScan query 04:28:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:28:57 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:28:57 Message to Master queued w/err=0: serial=104823 error=0 04:29:02 Received message from Master: op=Filter serial=104824 04:29:02 Color wheel filter change from 0 to 0 04:29:02 FLIGetFilterPos err=0 currentPosition=0 04:29:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:02 Filter is already there-color wheel unchanged 04:29:02 Received message from Master: op=Shutter serial=104825 04:29:02 Shutter LASER close 04:29:02 Received message from Camera: op=State serial=104827 04:29:02 GetSingleValue result=40 Value=cccccccc 04:29:02 SkyScan query 04:29:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:29:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:03 Parameters OK 04:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:03 Set A/D data flow result=40 04:29:03 Set A/D channel type result=40 04:29:03 Set A/D encoding result=40 04:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:03 Set channel filter=0.000000e+000 result=40 04:29:03 Config A/D Result=40 04:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:03 Get A/D filter: -9.255963e+061 result=40 04:29:03 Get A/D value=-858993460 result=40 04:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:03 Parameters OK 04:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:03 Set A/D data flow result=40 04:29:03 Set A/D channel type result=40 04:29:03 Set A/D encoding result=40 04:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:03 Set channel filter=0.000000e+000 result=40 04:29:03 Config A/D Result=40 04:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:03 Get A/D filter: -9.255963e+061 result=40 04:29:03 Get A/D value=-858993460 result=40 04:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:03 Aux= 04:29:03 Message to Camera, serial 104827 queued 04:29:39 Received message from Master: op=PointingHead serial=104840 04:29:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:29:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:29:40 Point started: ret=0 04:29:40 point_skyscan result=0 04:29:41 Check angles 04:29:41 SkyScan query 04:29:41 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 04:29:41 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 04:29:41 Check angles 04:29:41 SkyScan query 04:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:29:42 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:29:42 Message to Master queued w/err=0: serial=104840 error=0 04:29:47 Received message from Master: op=Filter serial=104841 04:29:47 Color wheel filter change from 0 to 0 04:29:47 FLIGetFilterPos err=0 currentPosition=0 04:29:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:47 Filter is already there-color wheel unchanged 04:29:47 Received message from Master: op=Shutter serial=104842 04:29:47 Shutter LASER open 04:29:47 Received message from Camera: op=State serial=104844 04:29:47 GetSingleValue result=40 Value=cccccccc 04:29:47 SkyScan query 04:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:29:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:48 Parameters OK 04:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:48 Set A/D data flow result=40 04:29:48 Set A/D channel type result=40 04:29:48 Set A/D encoding result=40 04:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:48 Set channel filter=0.000000e+000 result=40 04:29:48 Config A/D Result=40 04:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:48 Get A/D filter: -9.255963e+061 result=40 04:29:48 Get A/D value=-858993460 result=40 04:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:48 Parameters OK 04:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:48 Set A/D data flow result=40 04:29:48 Set A/D channel type result=40 04:29:48 Set A/D encoding result=40 04:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:48 Set channel filter=0.000000e+000 result=40 04:29:48 Config A/D Result=40 04:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:48 Get A/D filter: -9.255963e+061 result=40 04:29:48 Get A/D value=-858993460 result=40 04:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:48 Aux= 04:29:48 Message to Camera, serial 104844 queued 04:29:56 Received message from Master: op=Shutter serial=104854 04:29:56 Shutter LASER close 04:29:57 Received message from Master: op=PointingHead serial=104858 04:29:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:29:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:29:57 Point started: ret=0 04:29:57 point_skyscan result=0 04:29:58 Check angles 04:29:58 SkyScan query 04:29:59 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.505<-21567 Statuses=0009 0009 04:29:59 Msec=0 True Az=135.84 Ze=-143.505 Az status=0009 Ze status=0009 04:29:59 Check angles 04:29:59 SkyScan query 04:29:59 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.52<-20168 Statuses=0009 0009 04:29:59 Msec=750 True Az=153.24 Ze=-122.52 Az status=0009 Ze status=0009 04:29:59 Check angles 04:29:59 SkyScan query 04:30:00 SkyScan query done: ret=0 az=170.82<-11388 ze=-101.61<-18774 Statuses=0009 0009 04:30:00 Msec=1500 True Az=170.82 Ze=-101.61 Az status=0009 Ze status=0009 04:30:00 Check angles 04:30:00 SkyScan query 04:30:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.58<-17372 Statuses=0008 0009 04:30:01 Msec=2250 True Az=176.01 Ze=-80.58 Az status=0008 Ze status=0009 04:30:01 Check angles 04:30:01 SkyScan query 04:30:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.67<-15978 Statuses=0008 0009 04:30:02 Msec=3000 True Az=176.01 Ze=-59.67 Az status=0008 Ze status=0009 04:30:02 Check angles 04:30:02 SkyScan query 04:30:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 04:30:02 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 04:30:02 Message to Master queued w/err=0: serial=104858 error=0 04:30:07 Received message from Master: op=Filter serial=104859 04:30:07 Color wheel filter change from 0 to 0 04:30:07 FLIGetFilterPos err=0 currentPosition=0 04:30:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:07 Filter is already there-color wheel unchanged 04:30:07 Received message from Master: op=Shutter serial=104860 04:30:07 Shutter LASER close 04:30:08 Received message from Camera: op=State serial=104862 04:30:08 GetSingleValue result=40 Value=cccccccc 04:30:08 SkyScan query 04:30:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:30:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:08 Parameters OK 04:30:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:08 Set A/D data flow result=40 04:30:08 Set A/D channel type result=40 04:30:08 Set A/D encoding result=40 04:30:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:08 Set channel filter=0.000000e+000 result=40 04:30:08 Config A/D Result=40 04:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:08 Get A/D filter: -9.255963e+061 result=40 04:30:08 Get A/D value=-858993460 result=40 04:30:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:08 Parameters OK 04:30:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:08 Set A/D data flow result=40 04:30:08 Set A/D channel type result=40 04:30:08 Set A/D encoding result=40 04:30:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:08 Set channel filter=0.000000e+000 result=40 04:30:08 Config A/D Result=40 04:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:08 Get A/D filter: -9.255963e+061 result=40 04:30:08 Get A/D value=-858993460 result=40 04:30:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:08 Aux= 04:30:08 Message to Camera, serial 104862 queued 04:30:45 Received message from Master: op=PointingHead serial=104875 04:30:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:30:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:30:45 Point started: ret=0 04:30:45 point_skyscan result=0 04:30:46 Check angles 04:30:46 SkyScan query 04:30:47 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.18<-13412 Statuses=0009 0009 04:30:47 Msec=0 True Az=152.58 Ze=-21.18 Az status=0009 Ze status=0009 04:30:47 Check angles 04:30:47 SkyScan query 04:30:47 SkyScan query done: ret=0 az=134.61<-8974 ze=0.165<-11989 Statuses=0009 0009 04:30:47 Msec=750 True Az=134.61 Ze=0.165 Az status=0009 Ze status=0009 04:30:48 Check angles 04:30:48 SkyScan query 04:30:48 SkyScan query done: ret=0 az=117.105<-7807 ze=21.15<-10590 Statuses=0009 0009 04:30:48 Msec=1500 True Az=117.105 Ze=21.15 Az status=0009 Ze status=0009 04:30:48 Check angles 04:30:48 SkyScan query 04:30:49 SkyScan query done: ret=0 az=99.6<-6640 ze=42.495<-9167 Statuses=0009 0009 04:30:49 Msec=2250 True Az=99.6 Ze=42.495 Az status=0009 Ze status=0009 04:30:49 Check angles 04:30:49 SkyScan query 04:30:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:30:50 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:30:50 Check angles 04:30:50 SkyScan query 04:30:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:30:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:30:50 Message to Master queued w/err=0: serial=104875 error=0 04:30:55 Received message from Master: op=Filter serial=104876 04:30:55 Color wheel filter change from 0 to 0 04:30:55 FLIGetFilterPos err=0 currentPosition=0 04:30:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:55 Filter is already there-color wheel unchanged 04:30:56 Received message from Master: op=Shutter serial=104877 04:30:56 Shutter LASER close 04:30:56 Received message from Camera: op=State serial=104879 04:30:56 GetSingleValue result=40 Value=cccccccc 04:30:56 SkyScan query 04:30:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:30:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:56 Parameters OK 04:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:56 Set A/D data flow result=40 04:30:56 Set A/D channel type result=40 04:30:56 Set A/D encoding result=40 04:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:56 Set channel filter=0.000000e+000 result=40 04:30:56 Config A/D Result=40 04:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:56 Get A/D filter: -9.255963e+061 result=40 04:30:56 Get A/D value=-858993460 result=40 04:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:56 Parameters OK 04:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:56 Set A/D data flow result=40 04:30:56 Set A/D channel type result=40 04:30:56 Set A/D encoding result=40 04:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:56 Set channel filter=0.000000e+000 result=40 04:30:56 Config A/D Result=40 04:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:56 Get A/D filter: -9.255963e+061 result=40 04:30:56 Get A/D value=-858993460 result=40 04:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:56 Aux= 04:30:56 Message to Camera, serial 104879 queued 04:31:33 Received message from Master: op=PointingHead serial=104892 04:31:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:31:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:31:33 Point started: ret=0 04:31:33 point_skyscan result=0 04:31:34 Check angles 04:31:34 SkyScan query 04:31:35 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 04:31:35 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 04:31:35 Check angles 04:31:35 SkyScan query 04:31:36 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 04:31:36 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 04:31:36 Check angles 04:31:36 SkyScan query 04:31:36 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 04:31:36 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 04:31:36 Check angles 04:31:36 SkyScan query 04:31:37 SkyScan query done: ret=0 az=161.295<-10753 ze=38.505<-9433 Statuses=0009 0008 04:31:37 Msec=2250 True Az=161.295 Ze=38.505 Az status=0009 Ze status=0008 04:31:37 Check angles 04:31:37 SkyScan query 04:31:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 04:31:38 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 04:31:38 Check angles 04:31:38 SkyScan query 04:31:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:31:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:31:39 Message to Master queued w/err=0: serial=104892 error=0 04:31:44 Received message from Master: op=Filter serial=104893 04:31:44 Color wheel filter change from 0 to 0 04:31:44 FLIGetFilterPos err=0 currentPosition=0 04:31:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:44 Filter is already there-color wheel unchanged 04:31:44 Received message from Master: op=Shutter serial=104894 04:31:44 Shutter LASER close 04:31:44 Received message from Camera: op=State serial=104896 04:31:44 GetSingleValue result=40 Value=cccccccc 04:31:44 SkyScan query 04:31:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:31:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:44 Parameters OK 04:31:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:44 Set A/D data flow result=40 04:31:44 Set A/D channel type result=40 04:31:44 Set A/D encoding result=40 04:31:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:44 Set channel filter=0.000000e+000 result=40 04:31:44 Config A/D Result=40 04:31:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:44 Get A/D filter: -9.255963e+061 result=40 04:31:44 Get A/D value=-858993460 result=40 04:31:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:44 Parameters OK 04:31:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:44 Set A/D data flow result=40 04:31:44 Set A/D channel type result=40 04:31:44 Set A/D encoding result=40 04:31:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:44 Set channel filter=0.000000e+000 result=40 04:31:44 Config A/D Result=40 04:31:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:44 Get A/D filter: -9.255963e+061 result=40 04:31:44 Get A/D value=-858993460 result=40 04:31:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:44 Aux= 04:31:44 Message to Camera, serial 104896 queued 04:32:21 Received message from Master: op=PointingHead serial=104909 04:32:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:32:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:32:21 Point started: ret=0 04:32:21 point_skyscan result=0 04:32:22 Check angles 04:32:22 SkyScan query 04:32:23 SkyScan query done: ret=0 az=153.18<-10212 ze=8.82<-11412 Statuses=0009 0009 04:32:23 Msec=0 True Az=153.18 Ze=8.82 Az status=0009 Ze status=0009 04:32:23 Check angles 04:32:23 SkyScan query 04:32:24 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.525<-12835 Statuses=0009 0009 04:32:24 Msec=750 True Az=135.345 Ze=-12.525 Az status=0009 Ze status=0009 04:32:24 Check angles 04:32:24 SkyScan query 04:32:24 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.48<-14232 Statuses=0009 0009 04:32:24 Msec=1500 True Az=117.795 Ze=-33.48 Az status=0009 Ze status=0009 04:32:24 Check angles 04:32:24 SkyScan query 04:32:25 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.555<-15437 Statuses=0009 0009 04:32:25 Msec=2250 True Az=100.065 Ze=-51.555 Az status=0009 Ze status=0009 04:32:25 Check angles 04:32:25 SkyScan query 04:32:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 04:32:26 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 04:32:26 Check angles 04:32:26 SkyScan query 04:32:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:32:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:32:27 Message to Master queued w/err=0: serial=104909 error=0 04:32:32 Received message from Master: op=Filter serial=104910 04:32:32 Color wheel filter change from 0 to 0 04:32:32 FLIGetFilterPos err=0 currentPosition=0 04:32:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:32 Filter is already there-color wheel unchanged 04:32:32 Received message from Master: op=Shutter serial=104911 04:32:32 Shutter LASER close 04:32:32 Received message from Camera: op=State serial=104913 04:32:32 GetSingleValue result=40 Value=cccccccc 04:32:32 SkyScan query 04:32:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:32:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:32 Parameters OK 04:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:32 Set A/D data flow result=40 04:32:32 Set A/D channel type result=40 04:32:32 Set A/D encoding result=40 04:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:32 Set channel filter=0.000000e+000 result=40 04:32:32 Config A/D Result=40 04:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:32 Get A/D filter: -9.255963e+061 result=40 04:32:32 Get A/D value=-858993460 result=40 04:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:32 Parameters OK 04:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:32 Set A/D data flow result=40 04:32:32 Set A/D channel type result=40 04:32:32 Set A/D encoding result=40 04:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:32 Set channel filter=0.000000e+000 result=40 04:32:32 Config A/D Result=40 04:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:32 Get A/D filter: -9.255963e+061 result=40 04:32:32 Get A/D value=-858993460 result=40 04:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:32 Aux= 04:32:32 Message to Camera, serial 104913 queued 04:33:09 Received message from Master: op=PointingHead serial=104926 04:33:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:33:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:33:10 Point started: ret=0 04:33:10 point_skyscan result=0 04:33:10 Check angles 04:33:10 SkyScan query 04:33:11 SkyScan query done: ret=0 az=109.665<-7311 ze=-81.795<-17453 Statuses=0009 0009 04:33:11 Msec=0 True Az=109.665 Ze=-81.795 Az status=0009 Ze status=0009 04:33:11 Check angles 04:33:11 SkyScan query 04:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 04:33:12 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 04:33:12 Check angles 04:33:12 SkyScan query 04:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 04:33:12 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 04:33:13 Check angles 04:33:13 SkyScan query 04:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 04:33:13 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 04:33:13 Check angles 04:33:13 SkyScan query 04:33:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.585<-23039 Statuses=0008 0009 04:33:14 Msec=3000 True Az=112.995 Ze=-165.585 Az status=0008 Ze status=0009 04:33:14 Check angles 04:33:14 SkyScan query 04:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:33:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:33:15 Message to Master queued w/err=0: serial=104926 error=0 04:33:20 Received message from Master: op=Filter serial=104927 04:33:20 Color wheel filter change from 0 to 0 04:33:20 FLIGetFilterPos err=0 currentPosition=0 04:33:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:20 Filter is already there-color wheel unchanged 04:33:20 Received message from Master: op=Shutter serial=104928 04:33:20 Shutter LASER open 04:33:20 Received message from Camera: op=State serial=104930 04:33:20 GetSingleValue result=40 Value=cccccccc 04:33:20 SkyScan query 04:33:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:33:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:21 Parameters OK 04:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:21 Set A/D data flow result=40 04:33:21 Set A/D channel type result=40 04:33:21 Set A/D encoding result=40 04:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:21 Set channel filter=0.000000e+000 result=40 04:33:21 Config A/D Result=40 04:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:21 Get A/D filter: -9.255963e+061 result=40 04:33:21 Get A/D value=-858993460 result=40 04:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:21 Parameters OK 04:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:21 Set A/D data flow result=40 04:33:21 Set A/D channel type result=40 04:33:21 Set A/D encoding result=40 04:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:21 Set channel filter=0.000000e+000 result=40 04:33:21 Config A/D Result=40 04:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:21 Get A/D filter: -9.255963e+061 result=40 04:33:21 Get A/D value=-858993460 result=40 04:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:21 Aux= 04:33:21 Message to Camera, serial 104930 queued 04:33:29 Received message from Master: op=Shutter serial=104940 04:33:29 Shutter LASER close 04:33:30 Received message from Master: op=PointingHead serial=104944 04:33:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:33:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:33:30 Point started: ret=0 04:33:30 point_skyscan result=0 04:33:31 Check angles 04:33:31 SkyScan query 04:33:31 SkyScan query done: ret=0 az=90.045<-6003 ze=157.365<-1509 Statuses=0009 0009 04:33:31 Msec=0 True Az=90.045 Ze=157.365 Az status=0009 Ze status=0009 04:33:31 Check angles 04:33:31 SkyScan query 04:33:32 SkyScan query done: ret=0 az=72.585<-4839 ze=136.365<-2909 Statuses=0009 0009 04:33:32 Msec=750 True Az=72.585 Ze=136.365 Az status=0009 Ze status=0009 04:33:32 Check angles 04:33:32 SkyScan query 04:33:33 SkyScan query done: ret=0 az=55.08<-3672 ze=115.485<-4301 Statuses=0009 0009 04:33:33 Msec=1500 True Az=55.08 Ze=115.485 Az status=0009 Ze status=0009 04:33:33 Check angles 04:33:33 SkyScan query 04:33:33 SkyScan query done: ret=0 az=40.86<-2724 ze=94.47<-5702 Statuses=0009 0009 04:33:33 Msec=2250 True Az=40.86 Ze=94.47 Az status=0009 Ze status=0009 04:33:34 Check angles 04:33:34 SkyScan query 04:33:34 SkyScan query done: ret=0 az=40.995<-2733 ze=73.545<-7097 Statuses=0008 0009 04:33:34 Msec=3000 True Az=40.995 Ze=73.545 Az status=0008 Ze status=0009 04:33:34 Check angles 04:33:34 SkyScan query 04:33:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 04:33:35 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 04:33:35 Check angles 04:33:35 SkyScan query 04:33:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:33:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:33:36 Message to Master queued w/err=0: serial=104944 error=0 04:33:41 Received message from Master: op=Filter serial=104945 04:33:41 Color wheel filter change from 0 to 0 04:33:41 FLIGetFilterPos err=0 currentPosition=0 04:33:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:41 Filter is already there-color wheel unchanged 04:33:41 Received message from Master: op=Shutter serial=104946 04:33:41 Shutter LASER close 04:33:41 Received message from Camera: op=State serial=104948 04:33:41 GetSingleValue result=40 Value=cccccccc 04:33:41 SkyScan query 04:33:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:33:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:42 Parameters OK 04:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:42 Set A/D data flow result=40 04:33:42 Set A/D channel type result=40 04:33:42 Set A/D encoding result=40 04:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:42 Set channel filter=0.000000e+000 result=40 04:33:42 Config A/D Result=40 04:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:42 Get A/D filter: -9.255963e+061 result=40 04:33:42 Get A/D value=-858993460 result=40 04:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:42 Parameters OK 04:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:42 Set A/D data flow result=40 04:33:42 Set A/D channel type result=40 04:33:42 Set A/D encoding result=40 04:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:42 Set channel filter=0.000000e+000 result=40 04:33:42 Config A/D Result=40 04:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:42 Get A/D filter: -9.255963e+061 result=40 04:33:42 Get A/D value=-858993460 result=40 04:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:42 Aux= 04:33:42 Message to Camera, serial 104948 queued 04:34:18 Received message from Master: op=PointingHead serial=104961 04:34:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:34:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:34:19 Point started: ret=0 04:34:19 point_skyscan result=0 04:34:20 Check angles 04:34:20 SkyScan query 04:34:20 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 04:34:20 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 04:34:20 Check angles 04:34:20 SkyScan query 04:34:21 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 04:34:21 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 04:34:21 Check angles 04:34:21 SkyScan query 04:34:22 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 04:34:22 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 04:34:22 Check angles 04:34:22 SkyScan query 04:34:22 SkyScan query done: ret=0 az=117.375<-7825 ze=66.495<-7567 Statuses=0009 0008 04:34:22 Msec=2250 True Az=117.375 Ze=66.495 Az status=0009 Ze status=0008 04:34:23 Check angles 04:34:23 SkyScan query 04:34:23 SkyScan query done: ret=0 az=134.805<-8987 ze=66.495<-7567 Statuses=0009 0008 04:34:23 Msec=3000 True Az=134.805 Ze=66.495 Az status=0009 Ze status=0008 04:34:23 Check angles 04:34:23 SkyScan query 04:34:24 SkyScan query done: ret=0 az=152.16<-10144 ze=66.495<-7567 Statuses=0009 0008 04:34:24 Msec=3750 True Az=152.16 Ze=66.495 Az status=0009 Ze status=0008 04:34:24 Check angles 04:34:24 SkyScan query 04:34:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:34:25 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:34:25 Message to Master queued w/err=0: serial=104961 error=0 04:34:30 Received message from Master: op=Filter serial=104962 04:34:30 Color wheel filter change from 0 to 0 04:34:30 FLIGetFilterPos err=0 currentPosition=0 04:34:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:30 Filter is already there-color wheel unchanged 04:34:30 Received message from Master: op=Shutter serial=104963 04:34:30 Shutter LASER close 04:34:30 Received message from Camera: op=State serial=104965 04:34:30 GetSingleValue result=40 Value=cccccccc 04:34:30 SkyScan query 04:34:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:34:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:30 Parameters OK 04:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:30 Set A/D data flow result=40 04:34:30 Set A/D channel type result=40 04:34:30 Set A/D encoding result=40 04:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:30 Set channel filter=0.000000e+000 result=40 04:34:30 Config A/D Result=40 04:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:30 Get A/D filter: -9.255963e+061 result=40 04:34:30 Get A/D value=-858993460 result=40 04:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:30 Parameters OK 04:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:30 Set A/D data flow result=40 04:34:30 Set A/D channel type result=40 04:34:30 Set A/D encoding result=40 04:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:30 Set channel filter=0.000000e+000 result=40 04:34:30 Config A/D Result=40 04:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:30 Get A/D filter: -9.255963e+061 result=40 04:34:30 Get A/D value=-858993460 result=40 04:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:30 Aux= 04:34:30 Message to Camera, serial 104965 queued 04:35:07 Received message from Master: op=PointingHead serial=104978 04:35:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:35:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:35:08 Point started: ret=0 04:35:08 point_skyscan result=0 04:35:08 Check angles 04:35:08 SkyScan query 04:35:09 SkyScan query done: ret=0 az=135.015<-9001 ze=36.69<-9554 Statuses=0009 0009 04:35:09 Msec=0 True Az=135.015 Ze=36.69 Az status=0009 Ze status=0009 04:35:09 Check angles 04:35:09 SkyScan query 04:35:10 SkyScan query done: ret=0 az=117.135<-7809 ze=15.375<-10975 Statuses=0009 0009 04:35:10 Msec=750 True Az=117.135 Ze=15.375 Az status=0009 Ze status=0009 04:35:10 Check angles 04:35:10 SkyScan query 04:35:10 SkyScan query done: ret=0 az=99.735<-6649 ze=-5.625<-12375 Statuses=0009 0009 04:35:10 Msec=1500 True Az=99.735 Ze=-5.625 Az status=0009 Ze status=0009 04:35:11 Check angles 04:35:11 SkyScan query 04:35:11 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.565<-13771 Statuses=0009 0009 04:35:11 Msec=2250 True Az=82.26 Ze=-26.565 Az status=0009 Ze status=0009 04:35:11 Check angles 04:35:11 SkyScan query 04:35:12 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.565<-14571 Statuses=0009 0008 04:35:12 Msec=3000 True Az=64.425 Ze=-38.565 Az status=0009 Ze status=0008 04:35:12 Check angles 04:35:12 SkyScan query 04:35:13 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.535<-14569 Statuses=0009 0008 04:35:13 Msec=3750 True Az=47.025 Ze=-38.535 Az status=0009 Ze status=0008 04:35:13 Check angles 04:35:13 SkyScan query 04:35:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:35:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:35:13 Message to Master queued w/err=0: serial=104978 error=0 04:35:18 Received message from Master: op=Filter serial=104979 04:35:18 Color wheel filter change from 0 to 0 04:35:18 FLIGetFilterPos err=0 currentPosition=0 04:35:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:18 Filter is already there-color wheel unchanged 04:35:19 Received message from Master: op=Shutter serial=104980 04:35:19 Shutter LASER close 04:35:19 Received message from Camera: op=State serial=104982 04:35:19 GetSingleValue result=40 Value=cccccccc 04:35:19 SkyScan query 04:35:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:35:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:19 Parameters OK 04:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:19 Set A/D data flow result=40 04:35:19 Set A/D channel type result=40 04:35:19 Set A/D encoding result=40 04:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:19 Set channel filter=0.000000e+000 result=40 04:35:19 Config A/D Result=40 04:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:19 Get A/D filter: -9.255963e+061 result=40 04:35:19 Get A/D value=-858993460 result=40 04:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:19 Parameters OK 04:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:19 Set A/D data flow result=40 04:35:19 Set A/D channel type result=40 04:35:19 Set A/D encoding result=40 04:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:19 Set channel filter=0.000000e+000 result=40 04:35:19 Config A/D Result=40 04:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:19 Get A/D filter: -9.255963e+061 result=40 04:35:19 Get A/D value=-858993460 result=40 04:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:19 Aux= 04:35:19 Message to Camera, serial 104982 queued [UTC 2018-12-13 04:35:52] 04:35:56 Received message from Master: op=PointingHead serial=104995 04:35:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:35:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:35:56 Point started: ret=0 04:35:56 point_skyscan result=0 04:35:57 Check angles 04:35:57 SkyScan query 04:35:58 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.13<-16542 Statuses=0009 0009 04:35:58 Msec=0 True Az=63.885 Ze=-68.13 Az status=0009 Ze status=0009 04:35:58 Check angles 04:35:58 SkyScan query 04:35:59 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.565<-17971 Statuses=0009 0009 04:35:59 Msec=750 True Az=81.585 Ze=-89.565 Az status=0009 Ze status=0009 04:35:59 Check angles 04:35:59 SkyScan query 04:35:59 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.52<-19368 Statuses=0009 0009 04:35:59 Msec=1500 True Az=99.165 Ze=-110.52 Az status=0009 Ze status=0009 04:35:59 Check angles 04:35:59 SkyScan query 04:36:00 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.46<-20764 Statuses=0009 0009 04:36:00 Msec=2250 True Az=116.745 Ze=-131.46 Az status=0009 Ze status=0009 04:36:00 Check angles 04:36:00 SkyScan query 04:36:01 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 04:36:01 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 04:36:01 Check angles 04:36:01 SkyScan query 04:36:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:36:02 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:36:02 Message to Master queued w/err=0: serial=104995 error=0 04:36:07 Received message from Master: op=Filter serial=104996 04:36:07 Color wheel filter change from 0 to 0 04:36:07 FLIGetFilterPos err=0 currentPosition=0 04:36:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:07 Filter is already there-color wheel unchanged 04:36:07 Received message from Master: op=Shutter serial=104997 04:36:07 Shutter LASER close 04:36:07 Received message from Camera: op=State serial=104999 04:36:07 GetSingleValue result=40 Value=cccccccc 04:36:07 SkyScan query 04:36:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:36:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:07 Parameters OK 04:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:07 Set A/D data flow result=40 04:36:07 Set A/D channel type result=40 04:36:07 Set A/D encoding result=40 04:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:07 Set channel filter=0.000000e+000 result=40 04:36:07 Config A/D Result=40 04:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:07 Get A/D filter: -9.255963e+061 result=40 04:36:07 Get A/D value=-858993460 result=40 04:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:07 Parameters OK 04:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:07 Set A/D data flow result=40 04:36:07 Set A/D channel type result=40 04:36:07 Set A/D encoding result=40 04:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:07 Set channel filter=0.000000e+000 result=40 04:36:07 Config A/D Result=40 04:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:07 Get A/D filter: -9.255963e+061 result=40 04:36:07 Get A/D value=-858993460 result=40 04:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:07 Aux= 04:36:07 Message to Camera, serial 104999 queued 04:36:44 Received message from Master: op=PointingHead serial=105012 04:36:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:36:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:36:44 Point started: ret=0 04:36:44 point_skyscan result=0 04:36:45 Check angles 04:36:45 SkyScan query 04:36:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 04:36:46 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 04:36:46 Check angles 04:36:46 SkyScan query 04:36:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:36:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:36:47 Message to Master queued w/err=0: serial=105012 error=0 04:36:52 Received message from Master: op=Filter serial=105013 04:36:52 Color wheel filter change from 0 to 0 04:36:52 FLIGetFilterPos err=0 currentPosition=0 04:36:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:52 Filter is already there-color wheel unchanged 04:36:52 Received message from Master: op=Shutter serial=105014 04:36:52 Shutter LASER open 04:36:52 Received message from Camera: op=State serial=105016 04:36:52 GetSingleValue result=40 Value=cccccccc 04:36:52 SkyScan query 04:36:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:36:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:52 Parameters OK 04:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:52 Set A/D data flow result=40 04:36:52 Set A/D channel type result=40 04:36:52 Set A/D encoding result=40 04:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:52 Set channel filter=0.000000e+000 result=40 04:36:52 Config A/D Result=40 04:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:52 Get A/D filter: -9.255963e+061 result=40 04:36:52 Get A/D value=-858993460 result=40 04:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:52 Parameters OK 04:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:52 Set A/D data flow result=40 04:36:52 Set A/D channel type result=40 04:36:52 Set A/D encoding result=40 04:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:52 Set channel filter=0.000000e+000 result=40 04:36:52 Config A/D Result=40 04:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:52 Get A/D filter: -9.255963e+061 result=40 04:36:52 Get A/D value=-858993460 result=40 04:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:52 Aux= 04:36:52 Message to Camera, serial 105016 queued 04:37:01 Received message from Master: op=Shutter serial=105026 04:37:01 Shutter LASER close 04:37:02 Received message from Master: op=PointingHead serial=105030 04:37:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:37:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:37:02 Point started: ret=0 04:37:02 point_skyscan result=0 04:37:03 Check angles 04:37:03 SkyScan query 04:37:03 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.385<-21559 Statuses=0009 0009 04:37:03 Msec=0 True Az=135.825 Ze=-143.385 Az status=0009 Ze status=0009 04:37:03 Check angles 04:37:03 SkyScan query 04:37:04 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.415<-20161 Statuses=0009 0009 04:37:04 Msec=750 True Az=153.375 Ze=-122.415 Az status=0009 Ze status=0009 04:37:04 Check angles 04:37:04 SkyScan query 04:37:05 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.505<-18767 Statuses=0009 0009 04:37:05 Msec=1500 True Az=170.805 Ze=-101.505 Az status=0009 Ze status=0009 04:37:05 Check angles 04:37:05 SkyScan query 04:37:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.46<-17364 Statuses=0008 0009 04:37:06 Msec=2250 True Az=176.01 Ze=-80.46 Az status=0008 Ze status=0009 04:37:06 Check angles 04:37:06 SkyScan query 04:37:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.565<-15971 Statuses=0008 0009 04:37:06 Msec=3000 True Az=176.01 Ze=-59.565 Az status=0008 Ze status=0009 04:37:06 Check angles 04:37:06 SkyScan query 04:37:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:37:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:37:07 Message to Master queued w/err=0: serial=105030 error=0 04:37:12 Received message from Master: op=Filter serial=105031 04:37:12 Color wheel filter change from 0 to 0 04:37:12 FLIGetFilterPos err=0 currentPosition=0 04:37:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:12 Filter is already there-color wheel unchanged 04:37:12 Received message from Master: op=Shutter serial=105032 04:37:12 Shutter LASER close 04:37:12 Received message from Camera: op=State serial=105034 04:37:12 GetSingleValue result=40 Value=cccccccc 04:37:12 SkyScan query 04:37:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:37:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:13 Parameters OK 04:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:13 Set A/D data flow result=40 04:37:13 Set A/D channel type result=40 04:37:13 Set A/D encoding result=40 04:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:13 Set channel filter=0.000000e+000 result=40 04:37:13 Config A/D Result=40 04:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:13 Get A/D filter: -9.255963e+061 result=40 04:37:13 Get A/D value=-858993460 result=40 04:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:13 Parameters OK 04:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:13 Set A/D data flow result=40 04:37:13 Set A/D channel type result=40 04:37:13 Set A/D encoding result=40 04:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:13 Set channel filter=0.000000e+000 result=40 04:37:13 Config A/D Result=40 04:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:13 Get A/D filter: -9.255963e+061 result=40 04:37:13 Get A/D value=-858993460 result=40 04:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:13 Aux= 04:37:13 Message to Camera, serial 105034 queued 04:37:50 Received message from Master: op=PointingHead serial=105047 04:37:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:37:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:37:50 Point started: ret=0 04:37:50 point_skyscan result=0 04:37:51 Check angles 04:37:51 SkyScan query 04:37:51 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.63<-13442 Statuses=0009 0009 04:37:51 Msec=0 True Az=152.91 Ze=-21.63 Az status=0009 Ze status=0009 04:37:52 Check angles 04:37:52 SkyScan query 04:37:52 SkyScan query done: ret=0 az=134.985<-8999 ze=-0.225<-12015 Statuses=0009 0009 04:37:52 Msec=750 True Az=134.985 Ze=-0.225 Az status=0009 Ze status=0009 04:37:52 Check angles 04:37:52 SkyScan query 04:37:53 SkyScan query done: ret=0 az=117.525<-7835 ze=20.7<-10620 Statuses=0009 0009 04:37:53 Msec=1500 True Az=117.525 Ze=20.7 Az status=0009 Ze status=0009 04:37:53 Check angles 04:37:53 SkyScan query 04:37:54 SkyScan query done: ret=0 az=100.17<-6678 ze=41.7<-9220 Statuses=0009 0009 04:37:54 Msec=2250 True Az=100.17 Ze=41.7 Az status=0009 Ze status=0009 04:37:54 Check angles 04:37:54 SkyScan query 04:37:54 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:37:54 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:37:55 Check angles 04:37:55 SkyScan query 04:37:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:37:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:37:55 Message to Master queued w/err=0: serial=105047 error=0 04:38:00 Received message from Master: op=Filter serial=105048 04:38:00 Color wheel filter change from 0 to 0 04:38:00 FLIGetFilterPos err=0 currentPosition=0 04:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:00 Filter is already there-color wheel unchanged 04:38:00 Received message from Master: op=Shutter serial=105049 04:38:00 Shutter LASER close 04:38:00 Received message from Camera: op=State serial=105051 04:38:00 GetSingleValue result=40 Value=cccccccc 04:38:00 SkyScan query 04:38:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:01 Parameters OK 04:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:01 Set A/D data flow result=40 04:38:01 Set A/D channel type result=40 04:38:01 Set A/D encoding result=40 04:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:01 Set channel filter=0.000000e+000 result=40 04:38:01 Config A/D Result=40 04:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:01 Get A/D filter: -9.255963e+061 result=40 04:38:01 Get A/D value=-858993460 result=40 04:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:01 Parameters OK 04:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:01 Set A/D data flow result=40 04:38:01 Set A/D channel type result=40 04:38:01 Set A/D encoding result=40 04:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:01 Set channel filter=0.000000e+000 result=40 04:38:01 Config A/D Result=40 04:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:01 Get A/D filter: -9.255963e+061 result=40 04:38:01 Get A/D value=-858993460 result=40 04:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:01 Aux= 04:38:01 Message to Camera, serial 105051 queued 04:38:38 Received message from Master: op=PointingHead serial=105064 04:38:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:38:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:38:38 Point started: ret=0 04:38:38 point_skyscan result=0 04:38:39 Check angles 04:38:39 SkyScan query 04:38:39 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 04:38:39 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 04:38:40 Check angles 04:38:40 SkyScan query 04:38:40 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 04:38:40 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 04:38:40 Check angles 04:38:40 SkyScan query 04:38:41 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 04:38:41 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 04:38:41 Check angles 04:38:41 SkyScan query 04:38:42 SkyScan query done: ret=0 az=161.235<-10749 ze=38.505<-9433 Statuses=0009 0008 04:38:42 Msec=2250 True Az=161.235 Ze=38.505 Az status=0009 Ze status=0008 04:38:42 Check angles 04:38:42 SkyScan query 04:38:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:38:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:38:43 Check angles 04:38:43 SkyScan query 04:38:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:38:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:38:43 Message to Master queued w/err=0: serial=105064 error=0 04:38:48 Received message from Master: op=Filter serial=105065 04:38:48 Color wheel filter change from 0 to 0 04:38:48 FLIGetFilterPos err=0 currentPosition=0 04:38:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:48 Filter is already there-color wheel unchanged 04:38:48 Received message from Master: op=Shutter serial=105066 04:38:48 Shutter LASER close 04:38:48 Received message from Camera: op=State serial=105068 04:38:48 GetSingleValue result=40 Value=cccccccc 04:38:48 SkyScan query 04:38:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:49 Parameters OK 04:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:49 Set A/D data flow result=40 04:38:49 Set A/D channel type result=40 04:38:49 Set A/D encoding result=40 04:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:49 Set channel filter=0.000000e+000 result=40 04:38:49 Config A/D Result=40 04:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:49 Get A/D filter: -9.255963e+061 result=40 04:38:49 Get A/D value=-858993460 result=40 04:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:49 Parameters OK 04:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:49 Set A/D data flow result=40 04:38:49 Set A/D channel type result=40 04:38:49 Set A/D encoding result=40 04:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:49 Set channel filter=0.000000e+000 result=40 04:38:49 Config A/D Result=40 04:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:49 Get A/D filter: -9.255963e+061 result=40 04:38:49 Get A/D value=-858993460 result=40 04:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:49 Aux= 04:38:49 Message to Camera, serial 105068 queued 04:39:26 Received message from Master: op=PointingHead serial=105081 04:39:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:39:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:39:26 Point started: ret=0 04:39:26 point_skyscan result=0 04:39:27 Check angles 04:39:27 SkyScan query 04:39:28 SkyScan query done: ret=0 az=152.775<-10185 ze=8.52<-11432 Statuses=0009 0009 04:39:28 Msec=0 True Az=152.775 Ze=8.52 Az status=0009 Ze status=0009 04:39:28 Check angles 04:39:28 SkyScan query 04:39:28 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.42<-12828 Statuses=0009 0009 04:39:28 Msec=750 True Az=135.42 Ze=-12.42 Az status=0009 Ze status=0009 04:39:28 Check angles 04:39:28 SkyScan query 04:39:29 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.81<-14254 Statuses=0009 0009 04:39:29 Msec=1500 True Az=117.465 Ze=-33.81 Az status=0009 Ze status=0009 04:39:29 Check angles 04:39:29 SkyScan query 04:39:30 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.555<-15437 Statuses=0009 0009 04:39:30 Msec=2250 True Az=100.155 Ze=-51.555 Az status=0009 Ze status=0009 04:39:30 Check angles 04:39:30 SkyScan query 04:39:31 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:39:31 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:39:31 Check angles 04:39:31 SkyScan query 04:39:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:39:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:39:31 Message to Master queued w/err=0: serial=105081 error=0 04:39:36 Received message from Master: op=Filter serial=105082 04:39:36 Color wheel filter change from 0 to 0 04:39:36 FLIGetFilterPos err=0 currentPosition=0 04:39:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:36 Filter is already there-color wheel unchanged 04:39:36 Received message from Master: op=Shutter serial=105083 04:39:36 Shutter LASER close 04:39:37 Received message from Camera: op=State serial=105085 04:39:37 GetSingleValue result=40 Value=cccccccc 04:39:37 SkyScan query 04:39:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:37 Parameters OK 04:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:37 Set A/D data flow result=40 04:39:37 Set A/D channel type result=40 04:39:37 Set A/D encoding result=40 04:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:37 Set channel filter=0.000000e+000 result=40 04:39:37 Config A/D Result=40 04:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:37 Get A/D filter: -9.255963e+061 result=40 04:39:37 Get A/D value=-858993460 result=40 04:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:37 Parameters OK 04:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:37 Set A/D data flow result=40 04:39:37 Set A/D channel type result=40 04:39:37 Set A/D encoding result=40 04:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:37 Set channel filter=0.000000e+000 result=40 04:39:37 Config A/D Result=40 04:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:37 Get A/D filter: -9.255963e+061 result=40 04:39:37 Get A/D value=-858993460 result=40 04:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:37 Aux= 04:39:37 Message to Camera, serial 105085 queued 04:40:14 Received message from Master: op=PointingHead serial=105098 04:40:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:40:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:40:14 Point started: ret=0 04:40:14 point_skyscan result=0 04:40:15 Check angles 04:40:15 SkyScan query 04:40:16 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.63<-17442 Statuses=0009 0009 04:40:16 Msec=0 True Az=109.35 Ze=-81.63 Az status=0009 Ze status=0009 04:40:16 Check angles 04:40:16 SkyScan query 04:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 04:40:16 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 04:40:17 Check angles 04:40:17 SkyScan query 04:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 04:40:17 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 04:40:17 Check angles 04:40:17 SkyScan query 04:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 04:40:18 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 04:40:18 Check angles 04:40:18 SkyScan query 04:40:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 04:40:19 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 04:40:19 Check angles 04:40:19 SkyScan query 04:40:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:40:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:40:19 Message to Master queued w/err=0: serial=105098 error=0 04:40:24 Received message from Master: op=Filter serial=105099 04:40:24 Color wheel filter change from 0 to 0 04:40:24 FLIGetFilterPos err=0 currentPosition=0 04:40:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:24 Filter is already there-color wheel unchanged 04:40:25 Received message from Master: op=Shutter serial=105100 04:40:25 Shutter LASER open 04:40:25 Received message from Camera: op=State serial=105102 04:40:25 GetSingleValue result=40 Value=cccccccc 04:40:25 SkyScan query 04:40:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:40:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:25 Parameters OK 04:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:25 Set A/D data flow result=40 04:40:25 Set A/D channel type result=40 04:40:25 Set A/D encoding result=40 04:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:25 Set channel filter=0.000000e+000 result=40 04:40:25 Config A/D Result=40 04:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:25 Get A/D filter: -9.255963e+061 result=40 04:40:25 Get A/D value=-858993460 result=40 04:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:25 Parameters OK 04:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:25 Set A/D data flow result=40 04:40:25 Set A/D channel type result=40 04:40:25 Set A/D encoding result=40 04:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:25 Set channel filter=0.000000e+000 result=40 04:40:25 Config A/D Result=40 04:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:25 Get A/D filter: -9.255963e+061 result=40 04:40:25 Get A/D value=-858993460 result=40 04:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:25 Aux= 04:40:25 Message to Camera, serial 105102 queued 04:40:34 Received message from Master: op=Shutter serial=105112 04:40:34 Shutter LASER close 04:40:34 Received message from Master: op=PointingHead serial=105116 04:40:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:40:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:40:35 Point started: ret=0 04:40:35 point_skyscan result=0 04:40:35 Check angles 04:40:35 SkyScan query 04:40:36 SkyScan query done: ret=0 az=90.165<-6011 ze=157.56<-1496 Statuses=0009 0009 04:40:36 Msec=0 True Az=90.165 Ze=157.56 Az status=0009 Ze status=0009 04:40:36 Check angles 04:40:36 SkyScan query 04:40:37 SkyScan query done: ret=0 az=72.75<-4850 ze=136.575<-2895 Statuses=0009 0009 04:40:37 Msec=750 True Az=72.75 Ze=136.575 Az status=0009 Ze status=0009 04:40:37 Check angles 04:40:37 SkyScan query 04:40:37 SkyScan query done: ret=0 az=54.945<-3663 ze=115.215<-4319 Statuses=0009 0009 04:40:37 Msec=1500 True Az=54.945 Ze=115.215 Az status=0009 Ze status=0009 04:40:38 Check angles 04:40:38 SkyScan query 04:40:38 SkyScan query done: ret=0 az=40.905<-2727 ze=93.84<-5744 Statuses=0009 0009 04:40:38 Msec=2250 True Az=40.905 Ze=93.84 Az status=0009 Ze status=0009 04:40:38 Check angles 04:40:38 SkyScan query 04:40:39 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 04:40:39 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 04:40:39 Check angles 04:40:39 SkyScan query 04:40:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 04:40:40 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 04:40:40 Check angles 04:40:40 SkyScan query 04:40:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:40:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:40:40 Message to Master queued w/err=0: serial=105116 error=0 04:40:45 Received message from Master: op=Filter serial=105117 04:40:45 Color wheel filter change from 0 to 0 04:40:45 FLIGetFilterPos err=0 currentPosition=0 04:40:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:45 Filter is already there-color wheel unchanged 04:40:46 Received message from Master: op=Shutter serial=105118 04:40:46 Shutter LASER close 04:40:46 Received message from Camera: op=State serial=105120 04:40:46 GetSingleValue result=40 Value=cccccccc 04:40:46 SkyScan query 04:40:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:40:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:46 Parameters OK 04:40:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:46 Set A/D data flow result=40 04:40:46 Set A/D channel type result=40 04:40:46 Set A/D encoding result=40 04:40:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:46 Set channel filter=0.000000e+000 result=40 04:40:46 Config A/D Result=40 04:40:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:46 Get A/D filter: -9.255963e+061 result=40 04:40:46 Get A/D value=-858993460 result=40 04:40:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:46 Parameters OK 04:40:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:46 Set A/D data flow result=40 04:40:46 Set A/D channel type result=40 04:40:46 Set A/D encoding result=40 04:40:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:46 Set channel filter=0.000000e+000 result=40 04:40:46 Config A/D Result=40 04:40:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:46 Get A/D filter: -9.255963e+061 result=40 04:40:46 Get A/D value=-858993460 result=40 04:40:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:46 Aux= 04:40:46 Message to Camera, serial 105120 queued 04:41:23 Received message from Master: op=PointingHead serial=105133 04:41:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:41:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:41:23 Point started: ret=0 04:41:23 point_skyscan result=0 04:41:24 Check angles 04:41:24 SkyScan query 04:41:25 SkyScan query done: ret=0 az=64.275<-4285 ze=66.555<-7563 Statuses=0009 0008 04:41:25 Msec=0 True Az=64.275 Ze=66.555 Az status=0009 Ze status=0008 04:41:25 Check angles 04:41:25 SkyScan query 04:41:26 SkyScan query done: ret=0 az=82.095<-5473 ze=66.495<-7567 Statuses=0009 0008 04:41:26 Msec=750 True Az=82.095 Ze=66.495 Az status=0009 Ze status=0008 04:41:26 Check angles 04:41:26 SkyScan query 04:41:26 SkyScan query done: ret=0 az=99.645<-6643 ze=66.495<-7567 Statuses=0009 0008 04:41:26 Msec=1500 True Az=99.645 Ze=66.495 Az status=0009 Ze status=0008 04:41:27 Check angles 04:41:27 SkyScan query 04:41:27 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 04:41:27 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 04:41:27 Check angles 04:41:27 SkyScan query 04:41:28 SkyScan query done: ret=0 az=134.955<-8997 ze=66.495<-7567 Statuses=0009 0008 04:41:28 Msec=3000 True Az=134.955 Ze=66.495 Az status=0009 Ze status=0008 04:41:28 Check angles 04:41:28 SkyScan query 04:41:29 SkyScan query done: ret=0 az=152.505<-10167 ze=66.495<-7567 Statuses=0009 0008 04:41:29 Msec=3750 True Az=152.505 Ze=66.495 Az status=0009 Ze status=0008 04:41:29 Check angles 04:41:29 SkyScan query 04:41:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:41:29 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:41:29 Message to Master queued w/err=0: serial=105133 error=0 04:41:34 Received message from Master: op=Filter serial=105134 04:41:34 Color wheel filter change from 0 to 0 04:41:34 FLIGetFilterPos err=0 currentPosition=0 04:41:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:34 Filter is already there-color wheel unchanged 04:41:35 Received message from Master: op=Shutter serial=105135 04:41:35 Shutter LASER close 04:41:35 Received message from Camera: op=State serial=105137 04:41:35 GetSingleValue result=40 Value=cccccccc 04:41:35 SkyScan query 04:41:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:41:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:35 Parameters OK 04:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:35 Set A/D data flow result=40 04:41:35 Set A/D channel type result=40 04:41:35 Set A/D encoding result=40 04:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:35 Set channel filter=0.000000e+000 result=40 04:41:35 Config A/D Result=40 04:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:35 Get A/D filter: -9.255963e+061 result=40 04:41:35 Get A/D value=-858993460 result=40 04:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:35 Parameters OK 04:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:35 Set A/D data flow result=40 04:41:35 Set A/D channel type result=40 04:41:35 Set A/D encoding result=40 04:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:35 Set channel filter=0.000000e+000 result=40 04:41:35 Config A/D Result=40 04:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:35 Get A/D filter: -9.255963e+061 result=40 04:41:35 Get A/D value=-858993460 result=40 04:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:35 Aux= 04:41:35 Message to Camera, serial 105137 queued 04:42:11 Received message from Master: op=PointingHead serial=105149 04:42:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:42:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:42:11 Point started: ret=0 04:42:11 point_skyscan result=0 04:42:12 Check angles 04:42:12 SkyScan query 04:42:13 SkyScan query done: ret=0 az=134.625<-8975 ze=36.345<-9577 Statuses=0009 0009 04:42:13 Msec=0 True Az=134.625 Ze=36.345 Az status=0009 Ze status=0009 04:42:13 Check angles 04:42:13 SkyScan query 04:42:14 SkyScan query done: ret=0 az=116.76<-7784 ze=14.91<-11006 Statuses=0009 0009 04:42:14 Msec=750 True Az=116.76 Ze=14.91 Az status=0009 Ze status=0009 04:42:14 Check angles 04:42:14 SkyScan query 04:42:14 SkyScan query done: ret=0 az=99.3<-6620 ze=-6.03<-12402 Statuses=0009 0009 04:42:14 Msec=1500 True Az=99.3 Ze=-6.03 Az status=0009 Ze status=0009 04:42:14 Check angles 04:42:14 SkyScan query 04:42:15 SkyScan query done: ret=0 az=81.87<-5458 ze=-26.985<-13799 Statuses=0009 0009 04:42:15 Msec=2250 True Az=81.87 Ze=-26.985 Az status=0009 Ze status=0009 04:42:15 Check angles 04:42:15 SkyScan query 04:42:16 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.565<-14571 Statuses=0009 0008 04:42:16 Msec=3000 True Az=64.425 Ze=-38.565 Az status=0009 Ze status=0008 04:42:16 Check angles 04:42:16 SkyScan query 04:42:17 SkyScan query done: ret=0 az=46.995<-3133 ze=-38.535<-14569 Statuses=0009 0008 04:42:17 Msec=3750 True Az=46.995 Ze=-38.535 Az status=0009 Ze status=0008 04:42:17 Check angles 04:42:17 SkyScan query 04:42:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:42:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:42:17 Message to Master queued w/err=0: serial=105149 error=0 04:42:22 Received message from Master: op=Filter serial=105150 04:42:22 Color wheel filter change from 0 to 0 04:42:22 FLIGetFilterPos err=0 currentPosition=0 04:42:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:22 Filter is already there-color wheel unchanged 04:42:22 Received message from Master: op=Shutter serial=105151 04:42:22 Shutter LASER close 04:42:23 Received message from Camera: op=State serial=105153 04:42:23 GetSingleValue result=40 Value=cccccccc 04:42:23 SkyScan query 04:42:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:42:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:23 Parameters OK 04:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:23 Set A/D data flow result=40 04:42:23 Set A/D channel type result=40 04:42:23 Set A/D encoding result=40 04:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:23 Set channel filter=0.000000e+000 result=40 04:42:23 Config A/D Result=40 04:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:23 Get A/D filter: -9.255963e+061 result=40 04:42:23 Get A/D value=-858993460 result=40 04:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:23 Parameters OK 04:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:23 Set A/D data flow result=40 04:42:23 Set A/D channel type result=40 04:42:23 Set A/D encoding result=40 04:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:23 Set channel filter=0.000000e+000 result=40 04:42:23 Config A/D Result=40 04:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:23 Get A/D filter: -9.255963e+061 result=40 04:42:23 Get A/D value=-858993460 result=40 04:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:23 Aux= 04:42:23 Message to Camera, serial 105153 queued 04:43:00 Received message from Master: op=PointingHead serial=105166 04:43:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:43:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:43:00 Point started: ret=0 04:43:00 point_skyscan result=0 04:43:01 Check angles 04:43:01 SkyScan query 04:43:02 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.55<-16570 Statuses=0009 0009 04:43:02 Msec=0 True Az=64.2 Ze=-68.55 Az status=0009 Ze status=0009 04:43:02 Check angles 04:43:02 SkyScan query 04:43:02 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.55<-17970 Statuses=0009 0009 04:43:02 Msec=750 True Az=81.615 Ze=-89.55 Az status=0009 Ze status=0009 04:43:03 Check angles 04:43:03 SkyScan query 04:43:03 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.505<-19367 Statuses=0009 0009 04:43:03 Msec=1500 True Az=99.15 Ze=-110.505 Az status=0009 Ze status=0009 04:43:03 Check angles 04:43:03 SkyScan query 04:43:04 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.445<-20763 Statuses=0009 0009 04:43:04 Msec=2250 True Az=116.745 Ze=-131.445 Az status=0009 Ze status=0009 04:43:04 Check angles 04:43:04 SkyScan query 04:43:05 SkyScan query done: ret=0 az=131.16<-8744 ze=-141.54<-21436 Statuses=0009 0008 04:43:05 Msec=3000 True Az=131.16 Ze=-141.54 Az status=0009 Ze status=0008 04:43:05 Check angles 04:43:05 SkyScan query 04:43:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:43:05 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:43:05 Message to Master queued w/err=0: serial=105166 error=0 04:43:10 Received message from Master: op=Filter serial=105167 04:43:10 Color wheel filter change from 0 to 0 04:43:10 FLIGetFilterPos err=0 currentPosition=0 04:43:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:10 Filter is already there-color wheel unchanged 04:43:11 Received message from Master: op=Shutter serial=105168 04:43:11 Shutter LASER close 04:43:11 Received message from Camera: op=State serial=105170 04:43:11 GetSingleValue result=40 Value=cccccccc 04:43:11 SkyScan query 04:43:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:43:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:11 Parameters OK 04:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:11 Set A/D data flow result=40 04:43:11 Set A/D channel type result=40 04:43:11 Set A/D encoding result=40 04:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:11 Set channel filter=0.000000e+000 result=40 04:43:11 Config A/D Result=40 04:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:11 Get A/D filter: -9.255963e+061 result=40 04:43:11 Get A/D value=-858993460 result=40 04:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:11 Parameters OK 04:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:11 Set A/D data flow result=40 04:43:11 Set A/D channel type result=40 04:43:11 Set A/D encoding result=40 04:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:11 Set channel filter=0.000000e+000 result=40 04:43:11 Config A/D Result=40 04:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:11 Get A/D filter: -9.255963e+061 result=40 04:43:11 Get A/D value=-858993460 result=40 04:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:11 Aux= 04:43:11 Message to Camera, serial 105170 queued 04:43:48 Received message from Master: op=PointingHead serial=105183 04:43:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:43:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:43:48 Point started: ret=0 04:43:48 point_skyscan result=0 04:43:49 Check angles 04:43:49 SkyScan query 04:43:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 04:43:50 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 04:43:50 Check angles 04:43:50 SkyScan query 04:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:43:50 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:43:50 Message to Master queued w/err=0: serial=105183 error=0 04:43:55 Received message from Master: op=Filter serial=105184 04:43:55 Color wheel filter change from 0 to 0 04:43:55 FLIGetFilterPos err=0 currentPosition=0 04:43:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:55 Filter is already there-color wheel unchanged 04:43:56 Received message from Master: op=Shutter serial=105185 04:43:56 Shutter LASER open 04:43:56 Received message from Camera: op=State serial=105187 04:43:56 GetSingleValue result=40 Value=cccccccc 04:43:56 SkyScan query 04:43:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:43:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:56 Parameters OK 04:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:56 Set A/D data flow result=40 04:43:56 Set A/D channel type result=40 04:43:56 Set A/D encoding result=40 04:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:56 Set channel filter=0.000000e+000 result=40 04:43:56 Config A/D Result=40 04:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:56 Get A/D filter: -9.255963e+061 result=40 04:43:56 Get A/D value=-858993460 result=40 04:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:56 Parameters OK 04:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:56 Set A/D data flow result=40 04:43:56 Set A/D channel type result=40 04:43:56 Set A/D encoding result=40 04:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:56 Set channel filter=0.000000e+000 result=40 04:43:56 Config A/D Result=40 04:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:56 Get A/D filter: -9.255963e+061 result=40 04:43:56 Get A/D value=-858993460 result=40 04:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:56 Aux= 04:43:56 Message to Camera, serial 105187 queued 04:44:05 Received message from Master: op=Shutter serial=105197 04:44:05 Shutter LASER close 04:44:05 Received message from Master: op=PointingHead serial=105201 04:44:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:44:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:44:06 Point started: ret=0 04:44:06 point_skyscan result=0 04:44:06 Check angles 04:44:06 SkyScan query 04:44:07 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.46<-21564 Statuses=0009 0009 04:44:07 Msec=0 True Az=135.96 Ze=-143.46 Az status=0009 Ze status=0009 04:44:07 Check angles 04:44:07 SkyScan query 04:44:08 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.49<-20166 Statuses=0009 0009 04:44:08 Msec=750 True Az=153.36 Ze=-122.49 Az status=0009 Ze status=0009 04:44:08 Check angles 04:44:08 SkyScan query 04:44:08 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.565<-18771 Statuses=0009 0009 04:44:08 Msec=1500 True Az=170.79 Ze=-101.565 Az status=0009 Ze status=0009 04:44:09 Check angles 04:44:09 SkyScan query 04:44:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.535<-17369 Statuses=0008 0009 04:44:09 Msec=2250 True Az=176.01 Ze=-80.535 Az status=0008 Ze status=0009 04:44:09 Check angles 04:44:09 SkyScan query 04:44:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.625<-15975 Statuses=0008 0009 04:44:10 Msec=3000 True Az=176.01 Ze=-59.625 Az status=0008 Ze status=0009 04:44:10 Check angles 04:44:10 SkyScan query 04:44:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 04:44:11 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 04:44:11 Message to Master queued w/err=0: serial=105201 error=0 04:44:16 Received message from Master: op=Filter serial=105202 04:44:16 Color wheel filter change from 0 to 0 04:44:16 FLIGetFilterPos err=0 currentPosition=0 04:44:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:16 Filter is already there-color wheel unchanged 04:44:16 Received message from Master: op=Shutter serial=105203 04:44:16 Shutter LASER close 04:44:16 Received message from Camera: op=State serial=105205 04:44:16 GetSingleValue result=40 Value=cccccccc 04:44:16 SkyScan query 04:44:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:44:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:17 Parameters OK 04:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:17 Set A/D data flow result=40 04:44:17 Set A/D channel type result=40 04:44:17 Set A/D encoding result=40 04:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:17 Set channel filter=0.000000e+000 result=40 04:44:17 Config A/D Result=40 04:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:17 Get A/D filter: -9.255963e+061 result=40 04:44:17 Get A/D value=-858993460 result=40 04:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:17 Parameters OK 04:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:17 Set A/D data flow result=40 04:44:17 Set A/D channel type result=40 04:44:17 Set A/D encoding result=40 04:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:17 Set channel filter=0.000000e+000 result=40 04:44:17 Config A/D Result=40 04:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:17 Get A/D filter: -9.255963e+061 result=40 04:44:17 Get A/D value=-858993460 result=40 04:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:17 Aux= 04:44:17 Message to Camera, serial 105205 queued 04:44:53 Received message from Master: op=PointingHead serial=105218 04:44:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:44:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:44:54 Point started: ret=0 04:44:54 point_skyscan result=0 04:44:55 Check angles 04:44:55 SkyScan query 04:44:55 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.975<-13465 Statuses=0009 0009 04:44:55 Msec=0 True Az=153.165 Ze=-21.975 Az status=0009 Ze status=0009 04:44:55 Check angles 04:44:55 SkyScan query 04:44:56 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.54<-12036 Statuses=0009 0009 04:44:56 Msec=750 True Az=135.39 Ze=-0.54 Az status=0009 Ze status=0009 04:44:56 Check angles 04:44:56 SkyScan query 04:44:57 SkyScan query done: ret=0 az=117.75<-7850 ze=20.37<-10642 Statuses=0009 0009 04:44:57 Msec=1500 True Az=117.75 Ze=20.37 Az status=0009 Ze status=0009 04:44:57 Check angles 04:44:57 SkyScan query 04:44:57 SkyScan query done: ret=0 az=100.365<-6691 ze=41.37<-9242 Statuses=0009 0009 04:44:57 Msec=2250 True Az=100.365 Ze=41.37 Az status=0009 Ze status=0009 04:44:58 Check angles 04:44:58 SkyScan query 04:44:58 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:44:58 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:44:58 Check angles 04:44:58 SkyScan query 04:44:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:44:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:44:59 Message to Master queued w/err=0: serial=105218 error=0 04:45:04 Received message from Master: op=Filter serial=105219 04:45:04 Color wheel filter change from 0 to 0 04:45:04 FLIGetFilterPos err=0 currentPosition=0 04:45:04 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:04 Filter is already there-color wheel unchanged 04:45:04 Received message from Master: op=Shutter serial=105220 04:45:04 Shutter LASER close 04:45:04 Received message from Camera: op=State serial=105222 04:45:04 GetSingleValue result=40 Value=cccccccc 04:45:04 SkyScan query 04:45:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:45:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:05 Parameters OK 04:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:05 Set A/D data flow result=40 04:45:05 Set A/D channel type result=40 04:45:05 Set A/D encoding result=40 04:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:05 Set channel filter=0.000000e+000 result=40 04:45:05 Config A/D Result=40 04:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:05 Get A/D filter: -9.255963e+061 result=40 04:45:05 Get A/D value=-858993460 result=40 04:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:05 Parameters OK 04:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:05 Set A/D data flow result=40 04:45:05 Set A/D channel type result=40 04:45:05 Set A/D encoding result=40 04:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:05 Set channel filter=0.000000e+000 result=40 04:45:05 Config A/D Result=40 04:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:05 Get A/D filter: -9.255963e+061 result=40 04:45:05 Get A/D value=-858993460 result=40 04:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:05 Aux= 04:45:05 Message to Camera, serial 105222 queued 04:45:27 Received message from Master: op=Identify serial=105223 04:45:42 Received message from Master: op=PointingHead serial=105238 04:45:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:45:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:45:42 Point started: ret=0 04:45:42 point_skyscan result=0 04:45:43 Check angles 04:45:43 SkyScan query 04:45:43 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 04:45:43 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 04:45:43 Check angles 04:45:43 SkyScan query 04:45:44 SkyScan query done: ret=0 az=126.45<-8430 ze=38.505<-9433 Statuses=0009 0008 04:45:44 Msec=750 True Az=126.45 Ze=38.505 Az status=0009 Ze status=0008 04:45:44 Check angles 04:45:44 SkyScan query 04:45:45 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 04:45:45 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 04:45:45 Check angles [UTC 2018-12-13 04:45:45] 04:45:45 SkyScan query 04:45:46 SkyScan query done: ret=0 az=162.885<-10859 ze=38.505<-9433 Statuses=0009 0008 04:45:46 Msec=2250 True Az=162.885 Ze=38.505 Az status=0009 Ze status=0008 04:45:46 Check angles 04:45:46 SkyScan query 04:45:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 04:45:46 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 04:45:46 Check angles 04:45:46 SkyScan query 04:45:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:45:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:45:47 Message to Master queued w/err=0: serial=105238 error=0 04:45:52 Received message from Master: op=Filter serial=105239 04:45:52 Color wheel filter change from 0 to 0 04:45:52 FLIGetFilterPos err=0 currentPosition=0 04:45:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:52 Filter is already there-color wheel unchanged 04:45:52 Received message from Master: op=Shutter serial=105240 04:45:52 Shutter LASER close 04:45:52 Received message from Camera: op=State serial=105242 04:45:52 GetSingleValue result=40 Value=cccccccc 04:45:52 SkyScan query 04:45:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:45:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:53 Parameters OK 04:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:53 Set A/D data flow result=40 04:45:53 Set A/D channel type result=40 04:45:53 Set A/D encoding result=40 04:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:53 Set channel filter=0.000000e+000 result=40 04:45:53 Config A/D Result=40 04:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:53 Get A/D filter: -9.255963e+061 result=40 04:45:53 Get A/D value=-858993460 result=40 04:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:53 Parameters OK 04:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:53 Set A/D data flow result=40 04:45:53 Set A/D channel type result=40 04:45:53 Set A/D encoding result=40 04:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:53 Set channel filter=0.000000e+000 result=40 04:45:53 Config A/D Result=40 04:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:53 Get A/D filter: -9.255963e+061 result=40 04:45:53 Get A/D value=-858993460 result=40 04:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:53 Aux= 04:45:53 Message to Camera, serial 105242 queued 04:46:30 Received message from Master: op=PointingHead serial=105255 04:46:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:46:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:46:30 Point started: ret=0 04:46:30 point_skyscan result=0 04:46:31 Check angles 04:46:31 SkyScan query 04:46:31 SkyScan query done: ret=0 az=153.285<-10219 ze=9<-11400 Statuses=0009 0009 04:46:31 Msec=0 True Az=153.285 Ze=9 Az status=0009 Ze status=0009 04:46:32 Check angles 04:46:32 SkyScan query 04:46:32 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.375<-12825 Statuses=0009 0009 04:46:32 Msec=750 True Az=135.405 Ze=-12.375 Az status=0009 Ze status=0009 04:46:32 Check angles 04:46:32 SkyScan query 04:46:33 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.315<-14221 Statuses=0009 0009 04:46:33 Msec=1500 True Az=117.93 Ze=-33.315 Az status=0009 Ze status=0009 04:46:33 Check angles 04:46:33 SkyScan query 04:46:34 SkyScan query done: ret=0 az=100.545<-6703 ze=-51.54<-15436 Statuses=0009 0009 04:46:34 Msec=2250 True Az=100.545 Ze=-51.54 Az status=0009 Ze status=0009 04:46:34 Check angles 04:46:34 SkyScan query 04:46:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:46:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:46:35 Check angles 04:46:35 SkyScan query 04:46:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:46:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:46:35 Message to Master queued w/err=0: serial=105255 error=0 04:46:40 Received message from Master: op=Filter serial=105256 04:46:40 Color wheel filter change from 0 to 0 04:46:40 FLIGetFilterPos err=0 currentPosition=0 04:46:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:40 Filter is already there-color wheel unchanged 04:46:40 Received message from Master: op=Shutter serial=105257 04:46:40 Shutter LASER close 04:46:40 Received message from Camera: op=State serial=105259 04:46:40 GetSingleValue result=40 Value=cccccccc 04:46:40 SkyScan query 04:46:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:46:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:41 Parameters OK 04:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:41 Set A/D data flow result=40 04:46:41 Set A/D channel type result=40 04:46:41 Set A/D encoding result=40 04:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:41 Set channel filter=0.000000e+000 result=40 04:46:41 Config A/D Result=40 04:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:41 Get A/D filter: -9.255963e+061 result=40 04:46:41 Get A/D value=-858993460 result=40 04:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:41 Parameters OK 04:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:41 Set A/D data flow result=40 04:46:41 Set A/D channel type result=40 04:46:41 Set A/D encoding result=40 04:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:41 Set channel filter=0.000000e+000 result=40 04:46:41 Config A/D Result=40 04:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:41 Get A/D filter: -9.255963e+061 result=40 04:46:41 Get A/D value=-858993460 result=40 04:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:41 Aux= 04:46:41 Message to Camera, serial 105259 queued 04:47:18 Received message from Master: op=PointingHead serial=105272 04:47:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:47:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:47:18 Point started: ret=0 04:47:18 point_skyscan result=0 04:47:19 Check angles 04:47:19 SkyScan query 04:47:19 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.3<-17420 Statuses=0009 0009 04:47:19 Msec=0 True Az=109.02 Ze=-81.3 Az status=0009 Ze status=0009 04:47:20 Check angles 04:47:20 SkyScan query 04:47:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.24<-18816 Statuses=0008 0009 04:47:20 Msec=750 True Az=112.995 Ze=-102.24 Az status=0008 Ze status=0009 04:47:20 Check angles 04:47:20 SkyScan query 04:47:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 04:47:21 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 04:47:21 Check angles 04:47:21 SkyScan query 04:47:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 04:47:22 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 04:47:22 Check angles 04:47:22 SkyScan query 04:47:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 04:47:22 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 04:47:23 Check angles 04:47:23 SkyScan query 04:47:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:47:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:47:23 Message to Master queued w/err=0: serial=105272 error=0 04:47:28 Received message from Master: op=Filter serial=105273 04:47:28 Color wheel filter change from 0 to 0 04:47:28 FLIGetFilterPos err=0 currentPosition=0 04:47:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:28 Filter is already there-color wheel unchanged 04:47:28 Received message from Master: op=Shutter serial=105274 04:47:28 Shutter LASER open 04:47:29 Received message from Camera: op=State serial=105276 04:47:29 GetSingleValue result=40 Value=cccccccc 04:47:29 SkyScan query 04:47:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:47:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:29 Parameters OK 04:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:29 Set A/D data flow result=40 04:47:29 Set A/D channel type result=40 04:47:29 Set A/D encoding result=40 04:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:29 Set channel filter=0.000000e+000 result=40 04:47:29 Config A/D Result=40 04:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:29 Get A/D filter: -9.255963e+061 result=40 04:47:29 Get A/D value=-858993460 result=40 04:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:29 Parameters OK 04:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:29 Set A/D data flow result=40 04:47:29 Set A/D channel type result=40 04:47:29 Set A/D encoding result=40 04:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:29 Set channel filter=0.000000e+000 result=40 04:47:29 Config A/D Result=40 04:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:29 Get A/D filter: -9.255963e+061 result=40 04:47:29 Get A/D value=-858993460 result=40 04:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:29 Aux= 04:47:29 Message to Camera, serial 105276 queued 04:47:38 Received message from Master: op=Shutter serial=105286 04:47:38 Shutter LASER close 04:47:38 Received message from Master: op=PointingHead serial=105290 04:47:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:47:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:47:38 Point started: ret=0 04:47:38 point_skyscan result=0 04:47:39 Check angles 04:47:39 SkyScan query 04:47:40 SkyScan query done: ret=0 az=90.045<-6003 ze=157.35<-1510 Statuses=0009 0009 04:47:40 Msec=0 True Az=90.045 Ze=157.35 Az status=0009 Ze status=0009 04:47:40 Check angles 04:47:40 SkyScan query 04:47:40 SkyScan query done: ret=0 az=72.675<-4845 ze=136.44<-2904 Statuses=0009 0009 04:47:40 Msec=750 True Az=72.675 Ze=136.44 Az status=0009 Ze status=0009 04:47:41 Check angles 04:47:41 SkyScan query 04:47:41 SkyScan query done: ret=0 az=55.14<-3676 ze=115.5<-4300 Statuses=0009 0009 04:47:41 Msec=1500 True Az=55.14 Ze=115.5 Az status=0009 Ze status=0009 04:47:41 Check angles 04:47:41 SkyScan query 04:47:42 SkyScan query done: ret=0 az=40.845<-2723 ze=94.515<-5699 Statuses=0009 0009 04:47:42 Msec=2250 True Az=40.845 Ze=94.515 Az status=0009 Ze status=0009 04:47:42 Check angles 04:47:42 SkyScan query 04:47:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.605<-7093 Statuses=0008 0009 04:47:43 Msec=3000 True Az=40.995 Ze=73.605 Az status=0008 Ze status=0009 04:47:43 Check angles 04:47:43 SkyScan query 04:47:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.965<-8469 Statuses=0008 0009 04:47:43 Msec=3750 True Az=40.995 Ze=52.965 Az status=0008 Ze status=0009 04:47:44 Check angles 04:47:44 SkyScan query 04:47:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:47:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:47:44 Message to Master queued w/err=0: serial=105290 error=0 04:47:49 Received message from Master: op=Filter serial=105291 04:47:49 Color wheel filter change from 0 to 0 04:47:49 FLIGetFilterPos err=0 currentPosition=0 04:47:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:49 Filter is already there-color wheel unchanged 04:47:49 Received message from Master: op=Shutter serial=105292 04:47:49 Shutter LASER close 04:47:50 Received message from Camera: op=State serial=105294 04:47:50 GetSingleValue result=40 Value=cccccccc 04:47:50 SkyScan query 04:47:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:47:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:50 Parameters OK 04:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:50 Set A/D data flow result=40 04:47:50 Set A/D channel type result=40 04:47:50 Set A/D encoding result=40 04:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:50 Set channel filter=0.000000e+000 result=40 04:47:50 Config A/D Result=40 04:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:50 Get A/D filter: -9.255963e+061 result=40 04:47:50 Get A/D value=-858993460 result=40 04:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:50 Parameters OK 04:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:50 Set A/D data flow result=40 04:47:50 Set A/D channel type result=40 04:47:50 Set A/D encoding result=40 04:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:50 Set channel filter=0.000000e+000 result=40 04:47:50 Config A/D Result=40 04:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:50 Get A/D filter: -9.255963e+061 result=40 04:47:50 Get A/D value=-858993460 result=40 04:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:50 Aux= 04:47:50 Message to Camera, serial 105294 queued 04:48:27 Received message from Master: op=PointingHead serial=105307 04:48:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:48:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:48:27 Point started: ret=0 04:48:27 point_skyscan result=0 04:48:28 Check angles 04:48:28 SkyScan query 04:48:29 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 04:48:29 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 04:48:29 Check angles 04:48:29 SkyScan query 04:48:29 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 04:48:29 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 04:48:30 Check angles 04:48:30 SkyScan query 04:48:30 SkyScan query done: ret=0 az=98.985<-6599 ze=66.495<-7567 Statuses=0009 0008 04:48:30 Msec=1500 True Az=98.985 Ze=66.495 Az status=0009 Ze status=0008 04:48:30 Check angles 04:48:30 SkyScan query 04:48:31 SkyScan query done: ret=0 az=116.565<-7771 ze=66.495<-7567 Statuses=0009 0008 04:48:31 Msec=2250 True Az=116.565 Ze=66.495 Az status=0009 Ze status=0008 04:48:31 Check angles 04:48:31 SkyScan query 04:48:32 SkyScan query done: ret=0 az=134.055<-8937 ze=66.495<-7567 Statuses=0009 0008 04:48:32 Msec=3000 True Az=134.055 Ze=66.495 Az status=0009 Ze status=0008 04:48:32 Check angles 04:48:32 SkyScan query 04:48:32 SkyScan query done: ret=0 az=151.44<-10096 ze=66.495<-7567 Statuses=0009 0008 04:48:32 Msec=3750 True Az=151.44 Ze=66.495 Az status=0009 Ze status=0008 04:48:33 Check angles 04:48:33 SkyScan query 04:48:33 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 04:48:33 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 04:48:33 Message to Master queued w/err=0: serial=105307 error=0 04:48:38 Received message from Master: op=Filter serial=105308 04:48:38 Color wheel filter change from 0 to 0 04:48:38 FLIGetFilterPos err=0 currentPosition=0 04:48:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:38 Filter is already there-color wheel unchanged 04:48:38 Received message from Master: op=Shutter serial=105309 04:48:38 Shutter LASER close 04:48:38 Received message from Camera: op=State serial=105311 04:48:38 GetSingleValue result=40 Value=cccccccc 04:48:38 SkyScan query 04:48:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:48:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:39 Parameters OK 04:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:39 Set A/D data flow result=40 04:48:39 Set A/D channel type result=40 04:48:39 Set A/D encoding result=40 04:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:39 Set channel filter=0.000000e+000 result=40 04:48:39 Config A/D Result=40 04:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:39 Get A/D filter: -9.255963e+061 result=40 04:48:39 Get A/D value=-858993460 result=40 04:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:39 Parameters OK 04:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:39 Set A/D data flow result=40 04:48:39 Set A/D channel type result=40 04:48:39 Set A/D encoding result=40 04:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:39 Set channel filter=0.000000e+000 result=40 04:48:39 Config A/D Result=40 04:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:39 Get A/D filter: -9.255963e+061 result=40 04:48:39 Get A/D value=-858993460 result=40 04:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:39 Aux= 04:48:39 Message to Camera, serial 105311 queued 04:49:16 Received message from Master: op=PointingHead serial=105324 04:49:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:49:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:49:16 Point started: ret=0 04:49:16 point_skyscan result=0 04:49:17 Check angles 04:49:17 SkyScan query 04:49:17 SkyScan query done: ret=0 az=134.67<-8978 ze=36.435<-9571 Statuses=0009 0009 04:49:17 Msec=0 True Az=134.67 Ze=36.435 Az status=0009 Ze status=0009 04:49:18 Check angles 04:49:18 SkyScan query 04:49:18 SkyScan query done: ret=0 az=116.97<-7798 ze=15.105<-10993 Statuses=0009 0009 04:49:18 Msec=750 True Az=116.97 Ze=15.105 Az status=0009 Ze status=0009 04:49:18 Check angles 04:49:18 SkyScan query 04:49:19 SkyScan query done: ret=0 az=99.54<-6636 ze=-5.865<-12391 Statuses=0009 0009 04:49:19 Msec=1500 True Az=99.54 Ze=-5.865 Az status=0009 Ze status=0009 04:49:19 Check angles 04:49:19 SkyScan query 04:49:20 SkyScan query done: ret=0 az=82.065<-5471 ze=-26.955<-13797 Statuses=0009 0009 04:49:20 Msec=2250 True Az=82.065 Ze=-26.955 Az status=0009 Ze status=0009 04:49:20 Check angles 04:49:20 SkyScan query 04:49:20 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.565<-14571 Statuses=0009 0008 04:49:20 Msec=3000 True Az=64.53 Ze=-38.565 Az status=0009 Ze status=0008 04:49:21 Check angles 04:49:21 SkyScan query 04:49:21 SkyScan query done: ret=0 az=46.68<-3112 ze=-38.535<-14569 Statuses=0009 0008 04:49:21 Msec=3750 True Az=46.68 Ze=-38.535 Az status=0009 Ze status=0008 04:49:21 Check angles 04:49:21 SkyScan query 04:49:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:49:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:49:22 Message to Master queued w/err=0: serial=105324 error=0 04:49:27 Received message from Master: op=Filter serial=105325 04:49:27 Color wheel filter change from 0 to 0 04:49:27 FLIGetFilterPos err=0 currentPosition=0 04:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:27 Filter is already there-color wheel unchanged 04:49:27 Received message from Master: op=Shutter serial=105326 04:49:27 Shutter LASER close 04:49:27 Received message from Camera: op=State serial=105328 04:49:27 GetSingleValue result=40 Value=cccccccc 04:49:27 SkyScan query 04:49:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:28 Parameters OK 04:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:28 Set A/D data flow result=40 04:49:28 Set A/D channel type result=40 04:49:28 Set A/D encoding result=40 04:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:28 Set channel filter=0.000000e+000 result=40 04:49:28 Config A/D Result=40 04:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:28 Get A/D filter: -9.255963e+061 result=40 04:49:28 Get A/D value=-858993460 result=40 04:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:28 Parameters OK 04:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:28 Set A/D data flow result=40 04:49:28 Set A/D channel type result=40 04:49:28 Set A/D encoding result=40 04:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:28 Set channel filter=0.000000e+000 result=40 04:49:28 Config A/D Result=40 04:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:28 Get A/D filter: -9.255963e+061 result=40 04:49:28 Get A/D value=-858993460 result=40 04:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:28 Aux= 04:49:28 Message to Camera, serial 105328 queued 04:50:05 Received message from Master: op=PointingHead serial=105341 04:50:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:50:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:50:05 Point started: ret=0 04:50:05 point_skyscan result=0 04:50:06 Check angles 04:50:06 SkyScan query 04:50:06 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.745<-16583 Statuses=0009 0009 04:50:06 Msec=0 True Az=64.41 Ze=-68.745 Az status=0009 Ze status=0009 04:50:06 Check angles 04:50:06 SkyScan query 04:50:07 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.715<-17981 Statuses=0009 0009 04:50:07 Msec=750 True Az=81.765 Ze=-89.715 Az status=0009 Ze status=0009 04:50:07 Check angles 04:50:07 SkyScan query 04:50:08 SkyScan query done: ret=0 az=99.81<-6654 ze=-111.105<-19407 Statuses=0009 0009 04:50:08 Msec=1500 True Az=99.81 Ze=-111.105 Az status=0009 Ze status=0009 04:50:08 Check angles 04:50:08 SkyScan query 04:50:09 SkyScan query done: ret=0 az=117.33<-7822 ze=-132.045<-20803 Statuses=0009 0009 04:50:09 Msec=2250 True Az=117.33 Ze=-132.045 Az status=0009 Ze status=0009 04:50:09 Check angles 04:50:09 SkyScan query 04:50:09 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 04:50:09 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 04:50:09 Check angles 04:50:09 SkyScan query 04:50:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:50:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:50:10 Message to Master queued w/err=0: serial=105341 error=0 04:50:15 Received message from Master: op=Filter serial=105342 04:50:15 Color wheel filter change from 0 to 0 04:50:15 FLIGetFilterPos err=0 currentPosition=0 04:50:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:15 Filter is already there-color wheel unchanged 04:50:15 Received message from Master: op=Shutter serial=105343 04:50:15 Shutter LASER close 04:50:15 Received message from Camera: op=State serial=105345 04:50:15 GetSingleValue result=40 Value=cccccccc 04:50:15 SkyScan query 04:50:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:50:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:16 Parameters OK 04:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:16 Set A/D data flow result=40 04:50:16 Set A/D channel type result=40 04:50:16 Set A/D encoding result=40 04:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:16 Set channel filter=0.000000e+000 result=40 04:50:16 Config A/D Result=40 04:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:16 Get A/D filter: -9.255963e+061 result=40 04:50:16 Get A/D value=-858993460 result=40 04:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:16 Parameters OK 04:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:16 Set A/D data flow result=40 04:50:16 Set A/D channel type result=40 04:50:16 Set A/D encoding result=40 04:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:16 Set channel filter=0.000000e+000 result=40 04:50:16 Config A/D Result=40 04:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:16 Get A/D filter: -9.255963e+061 result=40 04:50:16 Get A/D value=-858993460 result=40 04:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:16 Aux= 04:50:16 Message to Camera, serial 105345 queued 04:50:53 Received message from Master: op=PointingHead serial=105358 04:50:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:50:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:50:53 Point started: ret=0 04:50:53 point_skyscan result=0 04:50:54 Check angles 04:50:54 SkyScan query 04:50:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 04:50:54 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 04:50:55 Check angles 04:50:55 SkyScan query 04:50:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:50:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:50:55 Message to Master queued w/err=0: serial=105358 error=0 04:51:00 Received message from Master: op=Filter serial=105359 04:51:00 Color wheel filter change from 0 to 0 04:51:00 FLIGetFilterPos err=0 currentPosition=0 04:51:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:00 Filter is already there-color wheel unchanged 04:51:00 Received message from Master: op=Shutter serial=105360 04:51:00 Shutter LASER open 04:51:00 Received message from Camera: op=State serial=105362 04:51:00 GetSingleValue result=40 Value=cccccccc 04:51:00 SkyScan query 04:51:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:51:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:01 Parameters OK 04:51:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:01 Set A/D data flow result=40 04:51:01 Set A/D channel type result=40 04:51:01 Set A/D encoding result=40 04:51:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:01 Set channel filter=0.000000e+000 result=40 04:51:01 Config A/D Result=40 04:51:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:01 Get A/D filter: -9.255963e+061 result=40 04:51:01 Get A/D value=-858993460 result=40 04:51:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:01 Parameters OK 04:51:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:01 Set A/D data flow result=40 04:51:01 Set A/D channel type result=40 04:51:01 Set A/D encoding result=40 04:51:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:01 Set channel filter=0.000000e+000 result=40 04:51:01 Config A/D Result=40 04:51:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:01 Get A/D filter: -9.255963e+061 result=40 04:51:01 Get A/D value=-858993460 result=40 04:51:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:01 Aux= 04:51:01 Message to Camera, serial 105362 queued 04:51:09 Received message from Master: op=Shutter serial=105372 04:51:09 Shutter LASER close 04:51:10 Received message from Master: op=PointingHead serial=105376 04:51:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:51:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:51:10 Point started: ret=0 04:51:10 point_skyscan result=0 04:51:11 Check angles 04:51:11 SkyScan query 04:51:12 SkyScan query done: ret=0 az=136.29<-9086 ze=-142.89<-21526 Statuses=0009 0009 04:51:12 Msec=0 True Az=136.29 Ze=-142.89 Az status=0009 Ze status=0009 04:51:12 Check angles 04:51:12 SkyScan query 04:51:13 SkyScan query done: ret=0 az=154.11<-10274 ze=-121.53<-20102 Statuses=0009 0009 04:51:13 Msec=750 True Az=154.11 Ze=-121.53 Az status=0009 Ze status=0009 04:51:13 Check angles 04:51:13 SkyScan query 04:51:13 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.5<-18700 Statuses=0009 0009 04:51:13 Msec=1500 True Az=171.585 Ze=-100.5 Az status=0009 Ze status=0009 04:51:13 Check angles 04:51:13 SkyScan query 04:51:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.635<-17309 Statuses=0008 0009 04:51:14 Msec=2250 True Az=176.01 Ze=-79.635 Az status=0008 Ze status=0009 04:51:14 Check angles 04:51:14 SkyScan query 04:51:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.635<-15909 Statuses=0008 0009 04:51:15 Msec=3000 True Az=176.01 Ze=-58.635 Az status=0008 Ze status=0009 04:51:15 Check angles 04:51:15 SkyScan query 04:51:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 04:51:16 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 04:51:16 Message to Master queued w/err=0: serial=105376 error=0 04:51:21 Received message from Master: op=Filter serial=105377 04:51:21 Color wheel filter change from 0 to 0 04:51:21 FLIGetFilterPos err=0 currentPosition=0 04:51:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:21 Filter is already there-color wheel unchanged 04:51:21 Received message from Master: op=Shutter serial=105378 04:51:21 Shutter LASER close 04:51:21 Received message from Camera: op=State serial=105380 04:51:21 GetSingleValue result=40 Value=cccccccc 04:51:21 SkyScan query 04:51:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:51:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:21 Parameters OK 04:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:21 Set A/D data flow result=40 04:51:21 Set A/D channel type result=40 04:51:21 Set A/D encoding result=40 04:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:21 Set channel filter=0.000000e+000 result=40 04:51:21 Config A/D Result=40 04:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:21 Get A/D filter: -9.255963e+061 result=40 04:51:21 Get A/D value=-858993460 result=40 04:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:21 Parameters OK 04:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:21 Set A/D data flow result=40 04:51:21 Set A/D channel type result=40 04:51:21 Set A/D encoding result=40 04:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:21 Set channel filter=0.000000e+000 result=40 04:51:21 Config A/D Result=40 04:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:21 Get A/D filter: -9.255963e+061 result=40 04:51:21 Get A/D value=-858993460 result=40 04:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:21 Aux= 04:51:21 Message to Camera, serial 105380 queued 04:51:58 Received message from Master: op=PointingHead serial=105393 04:51:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:51:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:51:59 Point started: ret=0 04:51:59 point_skyscan result=0 04:51:59 Check angles 04:51:59 SkyScan query 04:52:00 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.105<-13407 Statuses=0009 0009 04:52:00 Msec=0 True Az=152.715 Ze=-21.105 Az status=0009 Ze status=0009 04:52:00 Check angles 04:52:00 SkyScan query 04:52:01 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.54<-12036 Statuses=0009 0009 04:52:01 Msec=750 True Az=135.36 Ze=-0.54 Az status=0009 Ze status=0009 04:52:01 Check angles 04:52:01 SkyScan query 04:52:01 SkyScan query done: ret=0 az=117.735<-7849 ze=20.325<-10645 Statuses=0009 0009 04:52:01 Msec=1500 True Az=117.735 Ze=20.325 Az status=0009 Ze status=0009 04:52:02 Check angles 04:52:02 SkyScan query 04:52:02 SkyScan query done: ret=0 az=100.365<-6691 ze=41.325<-9245 Statuses=0009 0009 04:52:02 Msec=2250 True Az=100.365 Ze=41.325 Az status=0009 Ze status=0009 04:52:02 Check angles 04:52:02 SkyScan query 04:52:03 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 04:52:03 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 04:52:03 Check angles 04:52:03 SkyScan query 04:52:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:52:04 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:52:04 Message to Master queued w/err=0: serial=105393 error=0 04:52:09 Received message from Master: op=Filter serial=105394 04:52:09 Color wheel filter change from 0 to 0 04:52:09 FLIGetFilterPos err=0 currentPosition=0 04:52:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:09 Filter is already there-color wheel unchanged 04:52:09 Received message from Master: op=Shutter serial=105395 04:52:09 Shutter LASER close 04:52:09 Received message from Camera: op=State serial=105397 04:52:09 GetSingleValue result=40 Value=cccccccc 04:52:09 SkyScan query 04:52:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:52:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:10 Parameters OK 04:52:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:10 Set A/D data flow result=40 04:52:10 Set A/D channel type result=40 04:52:10 Set A/D encoding result=40 04:52:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:10 Set channel filter=0.000000e+000 result=40 04:52:10 Config A/D Result=40 04:52:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:10 Get A/D filter: -9.255963e+061 result=40 04:52:10 Get A/D value=-858993460 result=40 04:52:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:10 Parameters OK 04:52:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:10 Set A/D data flow result=40 04:52:10 Set A/D channel type result=40 04:52:10 Set A/D encoding result=40 04:52:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:10 Set channel filter=0.000000e+000 result=40 04:52:10 Config A/D Result=40 04:52:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:10 Get A/D filter: -9.255963e+061 result=40 04:52:10 Get A/D value=-858993460 result=40 04:52:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:10 Aux= 04:52:10 Message to Camera, serial 105397 queued 04:52:46 Received message from Master: op=PointingHead serial=105410 04:52:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:52:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:52:47 Point started: ret=0 04:52:47 point_skyscan result=0 04:52:47 Check angles 04:52:47 SkyScan query 04:52:48 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 04:52:48 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 04:52:48 Check angles 04:52:48 SkyScan query 04:52:49 SkyScan query done: ret=0 az=127.185<-8479 ze=38.505<-9433 Statuses=0009 0008 04:52:49 Msec=750 True Az=127.185 Ze=38.505 Az status=0009 Ze status=0008 04:52:49 Check angles 04:52:49 SkyScan query 04:52:50 SkyScan query done: ret=0 az=144.63<-9642 ze=38.505<-9433 Statuses=0009 0008 04:52:50 Msec=1500 True Az=144.63 Ze=38.505 Az status=0009 Ze status=0008 04:52:50 Check angles 04:52:50 SkyScan query 04:52:50 SkyScan query done: ret=0 az=162.075<-10805 ze=38.505<-9433 Statuses=0009 0008 04:52:50 Msec=2250 True Az=162.075 Ze=38.505 Az status=0009 Ze status=0008 04:52:50 Check angles 04:52:50 SkyScan query 04:52:51 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:52:51 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:52:51 Check angles 04:52:51 SkyScan query 04:52:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:52:52 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:52:52 Message to Master queued w/err=0: serial=105410 error=0 04:52:57 Received message from Master: op=Filter serial=105411 04:52:57 Color wheel filter change from 0 to 0 04:52:57 FLIGetFilterPos err=0 currentPosition=0 04:52:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:57 Filter is already there-color wheel unchanged 04:52:57 Received message from Master: op=Shutter serial=105412 04:52:57 Shutter LASER close 04:52:57 Received message from Camera: op=State serial=105414 04:52:57 GetSingleValue result=40 Value=cccccccc 04:52:57 SkyScan query 04:52:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:52:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:58 Parameters OK 04:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:58 Set A/D data flow result=40 04:52:58 Set A/D channel type result=40 04:52:58 Set A/D encoding result=40 04:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:58 Set channel filter=0.000000e+000 result=40 04:52:58 Config A/D Result=40 04:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:58 Get A/D filter: -9.255963e+061 result=40 04:52:58 Get A/D value=-858993460 result=40 04:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:58 Parameters OK 04:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:58 Set A/D data flow result=40 04:52:58 Set A/D channel type result=40 04:52:58 Set A/D encoding result=40 04:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:58 Set channel filter=0.000000e+000 result=40 04:52:58 Config A/D Result=40 04:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:58 Get A/D filter: -9.255963e+061 result=40 04:52:58 Get A/D value=-858993460 result=40 04:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:58 Aux= 04:52:58 Message to Camera, serial 105414 queued 04:53:34 Received message from Master: op=PointingHead serial=105427 04:53:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:53:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:53:35 Point started: ret=0 04:53:35 point_skyscan result=0 04:53:36 Check angles 04:53:36 SkyScan query 04:53:36 SkyScan query done: ret=0 az=152.94<-10196 ze=8.73<-11418 Statuses=0009 0009 04:53:36 Msec=0 True Az=152.94 Ze=8.73 Az status=0009 Ze status=0009 04:53:36 Check angles 04:53:36 SkyScan query 04:53:37 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.645<-12843 Statuses=0009 0009 04:53:37 Msec=750 True Az=135.135 Ze=-12.645 Az status=0009 Ze status=0009 04:53:37 Check angles 04:53:37 SkyScan query 04:53:38 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.6<-14240 Statuses=0009 0009 04:53:38 Msec=1500 True Az=117.57 Ze=-33.6 Az status=0009 Ze status=0009 04:53:38 Check angles 04:53:38 SkyScan query 04:53:38 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.555<-15437 Statuses=0009 0009 04:53:38 Msec=2250 True Az=100.26 Ze=-51.555 Az status=0009 Ze status=0009 04:53:39 Check angles 04:53:39 SkyScan query 04:53:39 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 04:53:39 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 04:53:39 Check angles 04:53:39 SkyScan query 04:53:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:53:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:53:40 Message to Master queued w/err=0: serial=105427 error=0 04:53:45 Received message from Master: op=Filter serial=105428 04:53:45 Color wheel filter change from 0 to 0 04:53:45 FLIGetFilterPos err=0 currentPosition=0 04:53:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:45 Filter is already there-color wheel unchanged 04:53:45 Received message from Master: op=Shutter serial=105429 04:53:45 Shutter LASER close 04:53:45 Received message from Camera: op=State serial=105431 04:53:45 GetSingleValue result=40 Value=cccccccc 04:53:45 SkyScan query 04:53:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:53:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:46 Parameters OK 04:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:46 Set A/D data flow result=40 04:53:46 Set A/D channel type result=40 04:53:46 Set A/D encoding result=40 04:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:46 Set channel filter=0.000000e+000 result=40 04:53:46 Config A/D Result=40 04:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:46 Get A/D filter: -9.255963e+061 result=40 04:53:46 Get A/D value=-858993460 result=40 04:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:46 Parameters OK 04:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:46 Set A/D data flow result=40 04:53:46 Set A/D channel type result=40 04:53:46 Set A/D encoding result=40 04:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:46 Set channel filter=0.000000e+000 result=40 04:53:46 Config A/D Result=40 04:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:46 Get A/D filter: -9.255963e+061 result=40 04:53:46 Get A/D value=-858993460 result=40 04:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:46 Aux= 04:53:46 Message to Camera, serial 105431 queued 04:54:22 Received message from Master: op=PointingHead serial=105444 04:54:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:54:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:54:23 Point started: ret=0 04:54:23 point_skyscan result=0 04:54:24 Check angles 04:54:24 SkyScan query 04:54:24 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.36<-17424 Statuses=0009 0009 04:54:24 Msec=0 True Az=109.14 Ze=-81.36 Az status=0009 Ze status=0009 04:54:24 Check angles 04:54:24 SkyScan query 04:54:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.315<-18821 Statuses=0008 0009 04:54:25 Msec=750 True Az=112.995 Ze=-102.315 Az status=0008 Ze status=0009 04:54:25 Check angles 04:54:25 SkyScan query 04:54:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 04:54:26 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 04:54:26 Check angles 04:54:26 SkyScan query 04:54:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.255<-21617 Statuses=0008 0009 04:54:26 Msec=2250 True Az=112.995 Ze=-144.255 Az status=0008 Ze status=0009 04:54:27 Check angles 04:54:27 SkyScan query 04:54:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.63<-23042 Statuses=0008 0009 04:54:27 Msec=3000 True Az=112.995 Ze=-165.63 Az status=0008 Ze status=0009 04:54:27 Check angles 04:54:27 SkyScan query 04:54:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:54:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:54:28 Message to Master queued w/err=0: serial=105444 error=0 04:54:33 Received message from Master: op=Filter serial=105445 04:54:33 Color wheel filter change from 0 to 0 04:54:33 FLIGetFilterPos err=0 currentPosition=0 04:54:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:33 Filter is already there-color wheel unchanged 04:54:33 Received message from Master: op=Shutter serial=105446 04:54:33 Shutter LASER open 04:54:33 Received message from Camera: op=State serial=105448 04:54:33 GetSingleValue result=40 Value=cccccccc 04:54:33 SkyScan query 04:54:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:54:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:34 Parameters OK 04:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:34 Set A/D data flow result=40 04:54:34 Set A/D channel type result=40 04:54:34 Set A/D encoding result=40 04:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:34 Set channel filter=0.000000e+000 result=40 04:54:34 Config A/D Result=40 04:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:34 Get A/D filter: -9.255963e+061 result=40 04:54:34 Get A/D value=-858993460 result=40 04:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:34 Parameters OK 04:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:34 Set A/D data flow result=40 04:54:34 Set A/D channel type result=40 04:54:34 Set A/D encoding result=40 04:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:34 Set channel filter=0.000000e+000 result=40 04:54:34 Config A/D Result=40 04:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:34 Get A/D filter: -9.255963e+061 result=40 04:54:34 Get A/D value=-858993460 result=40 04:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:34 Aux= 04:54:34 Message to Camera, serial 105448 queued 04:54:42 Received message from Master: op=Shutter serial=105458 04:54:42 Shutter LASER close 04:54:43 Received message from Master: op=PointingHead serial=105462 04:54:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:54:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:54:43 Point started: ret=0 04:54:43 point_skyscan result=0 04:54:44 Check angles 04:54:44 SkyScan query 04:54:44 SkyScan query done: ret=0 az=89.46<-5964 ze=156.735<-1551 Statuses=0009 0009 04:54:44 Msec=0 True Az=89.46 Ze=156.735 Az status=0009 Ze status=0009 04:54:45 Check angles 04:54:45 SkyScan query 04:54:45 SkyScan query done: ret=0 az=71.985<-4799 ze=135.795<-2947 Statuses=0009 0009 04:54:45 Msec=750 True Az=71.985 Ze=135.795 Az status=0009 Ze status=0009 04:54:45 Check angles 04:54:45 SkyScan query 04:54:46 SkyScan query done: ret=0 az=54.735<-3649 ze=114.825<-4345 Statuses=0009 0009 04:54:46 Msec=1500 True Az=54.735 Ze=114.825 Az status=0009 Ze status=0009 04:54:46 Check angles 04:54:46 SkyScan query 04:54:47 SkyScan query done: ret=0 az=40.905<-2727 ze=93.885<-5741 Statuses=0009 0009 04:54:47 Msec=2250 True Az=40.905 Ze=93.885 Az status=0009 Ze status=0009 04:54:47 Check angles 04:54:47 SkyScan query 04:54:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 04:54:47 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 04:54:48 Check angles 04:54:48 SkyScan query 04:54:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 04:54:48 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 04:54:48 Check angles 04:54:48 SkyScan query 04:54:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:54:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:54:49 Message to Master queued w/err=0: serial=105462 error=0 04:54:54 Received message from Master: op=Filter serial=105463 04:54:54 Color wheel filter change from 0 to 0 04:54:54 FLIGetFilterPos err=0 currentPosition=0 04:54:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:54 Filter is already there-color wheel unchanged 04:54:54 Received message from Master: op=Shutter serial=105464 04:54:54 Shutter LASER close 04:54:54 Received message from Camera: op=State serial=105466 04:54:54 GetSingleValue result=40 Value=cccccccc 04:54:54 SkyScan query 04:54:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:54:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:55 Parameters OK 04:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:55 Set A/D data flow result=40 04:54:55 Set A/D channel type result=40 04:54:55 Set A/D encoding result=40 04:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:55 Set channel filter=0.000000e+000 result=40 04:54:55 Config A/D Result=40 04:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:55 Get A/D filter: -9.255963e+061 result=40 04:54:55 Get A/D value=-858993460 result=40 04:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:55 Parameters OK 04:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:55 Set A/D data flow result=40 04:54:55 Set A/D channel type result=40 04:54:55 Set A/D encoding result=40 04:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:55 Set channel filter=0.000000e+000 result=40 04:54:55 Config A/D Result=40 04:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:55 Get A/D filter: -9.255963e+061 result=40 04:54:55 Get A/D value=-858993460 result=40 04:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:55 Aux= 04:54:55 Message to Camera, serial 105466 queued 04:55:32 Received message from Master: op=PointingHead serial=105479 04:55:32 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:55:32 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:55:32 Point started: ret=0 04:55:32 point_skyscan result=0 04:55:33 Check angles 04:55:33 SkyScan query 04:55:33 SkyScan query done: ret=0 az=63.735<-4249 ze=66.555<-7563 Statuses=0009 0008 04:55:33 Msec=0 True Az=63.735 Ze=66.555 Az status=0009 Ze status=0008 04:55:34 Check angles 04:55:34 SkyScan query 04:55:34 SkyScan query done: ret=0 az=81.075<-5405 ze=66.495<-7567 Statuses=0009 0008 04:55:34 Msec=750 True Az=81.075 Ze=66.495 Az status=0009 Ze status=0008 04:55:34 Check angles 04:55:34 SkyScan query 04:55:35 SkyScan query done: ret=0 az=98.61<-6574 ze=66.495<-7567 Statuses=0009 0008 04:55:35 Msec=1500 True Az=98.61 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-13 04:55:35] 04:55:35 Check angles 04:55:35 SkyScan query 04:55:36 SkyScan query done: ret=0 az=117.645<-7843 ze=66.495<-7567 Statuses=0009 0008 04:55:36 Msec=2250 True Az=117.645 Ze=66.495 Az status=0009 Ze status=0008 04:55:36 Check angles 04:55:36 SkyScan query 04:55:36 SkyScan query done: ret=0 az=133.62<-8908 ze=66.495<-7567 Statuses=0009 0008 04:55:36 Msec=3000 True Az=133.62 Ze=66.495 Az status=0009 Ze status=0008 04:55:37 Check angles 04:55:37 SkyScan query 04:55:37 SkyScan query done: ret=0 az=151.08<-10072 ze=66.495<-7567 Statuses=0009 0008 04:55:37 Msec=3750 True Az=151.08 Ze=66.495 Az status=0009 Ze status=0008 04:55:37 Check angles 04:55:37 SkyScan query 04:55:38 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 04:55:38 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 04:55:38 Message to Master queued w/err=0: serial=105479 error=0 04:55:43 Received message from Master: op=Filter serial=105480 04:55:43 Color wheel filter change from 0 to 0 04:55:43 FLIGetFilterPos err=0 currentPosition=0 04:55:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:43 Filter is already there-color wheel unchanged 04:55:43 Received message from Master: op=Shutter serial=105481 04:55:43 Shutter LASER close 04:55:43 Received message from Camera: op=State serial=105483 04:55:43 GetSingleValue result=40 Value=cccccccc 04:55:43 SkyScan query 04:55:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:55:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:44 Parameters OK 04:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:44 Set A/D data flow result=40 04:55:44 Set A/D channel type result=40 04:55:44 Set A/D encoding result=40 04:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:44 Set channel filter=0.000000e+000 result=40 04:55:44 Config A/D Result=40 04:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:44 Get A/D filter: -9.255963e+061 result=40 04:55:44 Get A/D value=-858993460 result=40 04:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:44 Parameters OK 04:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:44 Set A/D data flow result=40 04:55:44 Set A/D channel type result=40 04:55:44 Set A/D encoding result=40 04:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:44 Set channel filter=0.000000e+000 result=40 04:55:44 Config A/D Result=40 04:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:44 Get A/D filter: -9.255963e+061 result=40 04:55:44 Get A/D value=-858993460 result=40 04:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:44 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:44 Aux= 04:55:44 Message to Camera, serial 105483 queued [UTC 2018-12-13 04:55:52] 04:56:20 Received message from Master: op=PointingHead serial=105495 04:56:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:56:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:56:20 Point started: ret=0 04:56:20 point_skyscan result=0 04:56:21 Check angles 04:56:21 SkyScan query 04:56:21 SkyScan query done: ret=0 az=134.88<-8992 ze=36.675<-9555 Statuses=0009 0009 04:56:21 Msec=0 True Az=134.88 Ze=36.675 Az status=0009 Ze status=0009 04:56:21 Check angles 04:56:21 SkyScan query 04:56:22 SkyScan query done: ret=0 az=117.39<-7826 ze=15.75<-10950 Statuses=0009 0009 04:56:22 Msec=750 True Az=117.39 Ze=15.75 Az status=0009 Ze status=0009 04:56:22 Check angles 04:56:22 SkyScan query 04:56:23 SkyScan query done: ret=0 az=100.005<-6667 ze=-5.22<-12348 Statuses=0009 0009 04:56:23 Msec=1500 True Az=100.005 Ze=-5.22 Az status=0009 Ze status=0009 04:56:23 Check angles 04:56:23 SkyScan query 04:56:23 SkyScan query done: ret=0 az=82.575<-5505 ze=-26.205<-13747 Statuses=0009 0009 04:56:23 Msec=2250 True Az=82.575 Ze=-26.205 Az status=0009 Ze status=0009 04:56:24 Check angles 04:56:24 SkyScan query 04:56:24 SkyScan query done: ret=0 az=65.115<-4341 ze=-38.565<-14571 Statuses=0009 0008 04:56:24 Msec=3000 True Az=65.115 Ze=-38.565 Az status=0009 Ze status=0008 04:56:24 Check angles 04:56:24 SkyScan query 04:56:25 SkyScan query done: ret=0 az=47.655<-3177 ze=-38.535<-14569 Statuses=0009 0008 04:56:25 Msec=3750 True Az=47.655 Ze=-38.535 Az status=0009 Ze status=0008 04:56:25 Check angles 04:56:25 SkyScan query 04:56:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:56:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:56:26 Message to Master queued w/err=0: serial=105495 error=0 04:56:31 Received message from Master: op=Filter serial=105496 04:56:31 Color wheel filter change from 0 to 0 04:56:31 FLIGetFilterPos err=0 currentPosition=0 04:56:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:31 Filter is already there-color wheel unchanged 04:56:31 Received message from Master: op=Shutter serial=105497 04:56:31 Shutter LASER close 04:56:31 Received message from Camera: op=State serial=105499 04:56:31 GetSingleValue result=40 Value=cccccccc 04:56:31 SkyScan query 04:56:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:56:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:32 Parameters OK 04:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:32 Set A/D data flow result=40 04:56:32 Set A/D channel type result=40 04:56:32 Set A/D encoding result=40 04:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:32 Set channel filter=0.000000e+000 result=40 04:56:32 Config A/D Result=40 04:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:32 Get A/D filter: -9.255963e+061 result=40 04:56:32 Get A/D value=-858993460 result=40 04:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:32 Parameters OK 04:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:32 Set A/D data flow result=40 04:56:32 Set A/D channel type result=40 04:56:32 Set A/D encoding result=40 04:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:32 Set channel filter=0.000000e+000 result=40 04:56:32 Config A/D Result=40 04:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:32 Get A/D filter: -9.255963e+061 result=40 04:56:32 Get A/D value=-858993460 result=40 04:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:32 Aux= 04:56:32 Message to Camera, serial 105499 queued 04:57:08 Received message from Master: op=PointingHead serial=105512 04:57:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:57:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:57:09 Point started: ret=0 04:57:09 point_skyscan result=0 04:57:09 Check angles 04:57:09 SkyScan query 04:57:10 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.445<-16563 Statuses=0009 0009 04:57:10 Msec=0 True Az=64.215 Ze=-68.445 Az status=0009 Ze status=0009 04:57:10 Check angles 04:57:10 SkyScan query 04:57:11 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.445<-17963 Statuses=0009 0009 04:57:11 Msec=750 True Az=81.585 Ze=-89.445 Az status=0009 Ze status=0009 04:57:11 Check angles 04:57:11 SkyScan query 04:57:12 SkyScan query done: ret=0 az=99.57<-6638 ze=-110.835<-19389 Statuses=0009 0009 04:57:12 Msec=1500 True Az=99.57 Ze=-110.835 Az status=0009 Ze status=0009 04:57:12 Check angles 04:57:12 SkyScan query 04:57:12 SkyScan query done: ret=0 az=117.525<-7835 ze=-132.18<-20812 Statuses=0009 0009 04:57:12 Msec=2250 True Az=117.525 Ze=-132.18 Az status=0009 Ze status=0009 04:57:13 Check angles 04:57:13 SkyScan query 04:57:13 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 04:57:13 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 04:57:13 Check angles 04:57:13 SkyScan query 04:57:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:57:14 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:57:14 Message to Master queued w/err=0: serial=105512 error=0 04:57:19 Received message from Master: op=Filter serial=105513 04:57:19 Color wheel filter change from 0 to 0 04:57:19 FLIGetFilterPos err=0 currentPosition=0 04:57:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:19 Filter is already there-color wheel unchanged 04:57:19 Received message from Master: op=Shutter serial=105514 04:57:19 Shutter LASER close 04:57:19 Received message from Camera: op=State serial=105516 04:57:19 GetSingleValue result=40 Value=cccccccc 04:57:19 SkyScan query 04:57:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:57:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:20 Parameters OK 04:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:20 Set A/D data flow result=40 04:57:20 Set A/D channel type result=40 04:57:20 Set A/D encoding result=40 04:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:20 Set channel filter=0.000000e+000 result=40 04:57:20 Config A/D Result=40 04:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:20 Get A/D filter: -9.255963e+061 result=40 04:57:20 Get A/D value=-858993460 result=40 04:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:20 Parameters OK 04:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:20 Set A/D data flow result=40 04:57:20 Set A/D channel type result=40 04:57:20 Set A/D encoding result=40 04:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:20 Set channel filter=0.000000e+000 result=40 04:57:20 Config A/D Result=40 04:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:20 Get A/D filter: -9.255963e+061 result=40 04:57:20 Get A/D value=-858993460 result=40 04:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:20 Aux= 04:57:20 Message to Camera, serial 105516 queued 04:57:56 Received message from Master: op=PointingHead serial=105529 04:57:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:57:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:57:57 Point started: ret=0 04:57:57 point_skyscan result=0 04:57:58 Check angles 04:57:58 SkyScan query 04:57:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.42<-23428 Statuses=0009 0009 04:57:58 Msec=0 True Az=113.01 Ze=-171.42 Az status=0009 Ze status=0009 04:57:58 Check angles 04:57:58 SkyScan query 04:57:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:57:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:57:59 Message to Master queued w/err=0: serial=105529 error=0 04:58:04 Received message from Master: op=Filter serial=105530 04:58:04 Color wheel filter change from 0 to 0 04:58:04 FLIGetFilterPos err=0 currentPosition=0 04:58:04 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:04 Filter is already there-color wheel unchanged 04:58:04 Received message from Master: op=Shutter serial=105531 04:58:04 Shutter LASER open 04:58:04 Received message from Camera: op=State serial=105533 04:58:04 GetSingleValue result=40 Value=cccccccc 04:58:04 SkyScan query 04:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:58:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:05 Parameters OK 04:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:05 Set A/D data flow result=40 04:58:05 Set A/D channel type result=40 04:58:05 Set A/D encoding result=40 04:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:05 Set channel filter=0.000000e+000 result=40 04:58:05 Config A/D Result=40 04:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:05 Get A/D filter: -9.255963e+061 result=40 04:58:05 Get A/D value=-858993460 result=40 04:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:05 Parameters OK 04:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:05 Set A/D data flow result=40 04:58:05 Set A/D channel type result=40 04:58:05 Set A/D encoding result=40 04:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:05 Set channel filter=0.000000e+000 result=40 04:58:05 Config A/D Result=40 04:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:05 Get A/D filter: -9.255963e+061 result=40 04:58:05 Get A/D value=-858993460 result=40 04:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:05 Aux= 04:58:05 Message to Camera, serial 105533 queued 04:58:13 Received message from Master: op=Shutter serial=105543 04:58:13 Shutter LASER close 04:58:14 Received message from Master: op=PointingHead serial=105547 04:58:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:58:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:58:14 Point started: ret=0 04:58:14 point_skyscan result=0 04:58:15 Check angles 04:58:15 SkyScan query 04:58:16 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.1<-21540 Statuses=0009 0009 04:58:16 Msec=0 True Az=136.17 Ze=-143.1 Az status=0009 Ze status=0009 04:58:16 Check angles 04:58:16 SkyScan query 04:58:16 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.71<-20114 Statuses=0009 0009 04:58:16 Msec=750 True Az=154.02 Ze=-121.71 Az status=0009 Ze status=0009 04:58:16 Check angles 04:58:16 SkyScan query 04:58:17 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.755<-18717 Statuses=0009 0009 04:58:17 Msec=1500 True Az=171.405 Ze=-100.755 Az status=0009 Ze status=0009 04:58:17 Check angles 04:58:17 SkyScan query 04:58:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.845<-17323 Statuses=0008 0009 04:58:18 Msec=2250 True Az=176.01 Ze=-79.845 Az status=0008 Ze status=0009 04:58:18 Check angles 04:58:18 SkyScan query 04:58:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.86<-15924 Statuses=0008 0009 04:58:19 Msec=3000 True Az=176.01 Ze=-58.86 Az status=0008 Ze status=0009 04:58:19 Check angles 04:58:19 SkyScan query 04:58:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:58:19 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:58:19 Message to Master queued w/err=0: serial=105547 error=0 04:58:24 Received message from Master: op=Filter serial=105548 04:58:24 Color wheel filter change from 0 to 0 04:58:24 FLIGetFilterPos err=0 currentPosition=0 04:58:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:24 Filter is already there-color wheel unchanged 04:58:24 Received message from Master: op=Shutter serial=105549 04:58:24 Shutter LASER close 04:58:25 Received message from Camera: op=State serial=105551 04:58:25 GetSingleValue result=40 Value=cccccccc 04:58:25 SkyScan query 04:58:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:58:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:25 Parameters OK 04:58:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:25 Set A/D data flow result=40 04:58:25 Set A/D channel type result=40 04:58:25 Set A/D encoding result=40 04:58:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:25 Set channel filter=0.000000e+000 result=40 04:58:25 Config A/D Result=40 04:58:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:25 Get A/D filter: -9.255963e+061 result=40 04:58:25 Get A/D value=-858993460 result=40 04:58:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:25 Parameters OK 04:58:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:25 Set A/D data flow result=40 04:58:25 Set A/D channel type result=40 04:58:25 Set A/D encoding result=40 04:58:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:25 Set channel filter=0.000000e+000 result=40 04:58:25 Config A/D Result=40 04:58:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:25 Get A/D filter: -9.255963e+061 result=40 04:58:25 Get A/D value=-858993460 result=40 04:58:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:25 Aux= 04:58:25 Message to Camera, serial 105551 queued 04:59:02 Received message from Master: op=PointingHead serial=105564 04:59:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:59:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:59:02 Point started: ret=0 04:59:02 point_skyscan result=0 04:59:03 Check angles 04:59:03 SkyScan query 04:59:04 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.585<-13439 Statuses=0009 0009 04:59:04 Msec=0 True Az=152.925 Ze=-21.585 Az status=0009 Ze status=0009 04:59:04 Check angles 04:59:04 SkyScan query 04:59:04 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.69<-12046 Statuses=0009 0009 04:59:04 Msec=750 True Az=135.42 Ze=-0.69 Az status=0009 Ze status=0009 04:59:05 Check angles 04:59:05 SkyScan query 04:59:05 SkyScan query done: ret=0 az=117.585<-7839 ze=20.67<-10622 Statuses=0009 0009 04:59:05 Msec=1500 True Az=117.585 Ze=20.67 Az status=0009 Ze status=0009 04:59:05 Check angles 04:59:05 SkyScan query 04:59:06 SkyScan query done: ret=0 az=100.11<-6674 ze=41.655<-9223 Statuses=0009 0009 04:59:06 Msec=2250 True Az=100.11 Ze=41.655 Az status=0009 Ze status=0009 04:59:06 Check angles 04:59:06 SkyScan query 04:59:07 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:59:07 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:59:07 Check angles 04:59:07 SkyScan query 04:59:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:59:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:59:07 Message to Master queued w/err=0: serial=105564 error=0 04:59:12 Received message from Master: op=Filter serial=105565 04:59:12 Color wheel filter change from 0 to 0 04:59:12 FLIGetFilterPos err=0 currentPosition=0 04:59:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:12 Filter is already there-color wheel unchanged 04:59:13 Received message from Master: op=Shutter serial=105566 04:59:13 Shutter LASER close 04:59:13 Received message from Camera: op=State serial=105568 04:59:13 GetSingleValue result=40 Value=cccccccc 04:59:13 SkyScan query 04:59:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:59:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:13 Parameters OK 04:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:13 Set A/D data flow result=40 04:59:13 Set A/D channel type result=40 04:59:13 Set A/D encoding result=40 04:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:13 Set channel filter=0.000000e+000 result=40 04:59:13 Config A/D Result=40 04:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:13 Get A/D filter: -9.255963e+061 result=40 04:59:13 Get A/D value=-858993460 result=40 04:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:13 Parameters OK 04:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:13 Set A/D data flow result=40 04:59:13 Set A/D channel type result=40 04:59:13 Set A/D encoding result=40 04:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:13 Set channel filter=0.000000e+000 result=40 04:59:13 Config A/D Result=40 04:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:13 Get A/D filter: -9.255963e+061 result=40 04:59:13 Get A/D value=-858993460 result=40 04:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:13 Aux= 04:59:13 Message to Camera, serial 105568 queued 04:59:50 Received message from Master: op=PointingHead serial=105581 04:59:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:59:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:59:50 Point started: ret=0 04:59:50 point_skyscan result=0 04:59:51 Check angles 04:59:51 SkyScan query 04:59:52 SkyScan query done: ret=0 az=109.41<-7294 ze=38.49<-9434 Statuses=0009 0008 04:59:52 Msec=0 True Az=109.41 Ze=38.49 Az status=0009 Ze status=0008 04:59:52 Check angles 04:59:52 SkyScan query 04:59:53 SkyScan query done: ret=0 az=127.245<-8483 ze=38.505<-9433 Statuses=0009 0008 04:59:53 Msec=750 True Az=127.245 Ze=38.505 Az status=0009 Ze status=0008 04:59:53 Check angles 04:59:53 SkyScan query 04:59:53 SkyScan query done: ret=0 az=144.69<-9646 ze=38.505<-9433 Statuses=0009 0008 04:59:53 Msec=1500 True Az=144.69 Ze=38.505 Az status=0009 Ze status=0008 04:59:53 Check angles 04:59:53 SkyScan query 04:59:54 SkyScan query done: ret=0 az=162.15<-10810 ze=38.505<-9433 Statuses=0009 0008 04:59:54 Msec=2250 True Az=162.15 Ze=38.505 Az status=0009 Ze status=0008 04:59:54 Check angles 04:59:54 SkyScan query 04:59:55 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:59:55 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:59:55 Check angles 04:59:55 SkyScan query 04:59:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:59:56 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:59:56 Message to Master queued w/err=0: serial=105581 error=0 05:00:01 Received message from Master: op=Filter serial=105582 05:00:01 Color wheel filter change from 0 to 0 05:00:01 FLIGetFilterPos err=0 currentPosition=0 05:00:01 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:01 Filter is already there-color wheel unchanged 05:00:01 Received message from Master: op=Shutter serial=105583 05:00:01 Shutter LASER close 05:00:01 Received message from Camera: op=State serial=105585 05:00:01 GetSingleValue result=40 Value=cccccccc 05:00:01 SkyScan query 05:00:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:00:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:01 Parameters OK 05:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:01 Set A/D data flow result=40 05:00:01 Set A/D channel type result=40 05:00:01 Set A/D encoding result=40 05:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:01 Set channel filter=0.000000e+000 result=40 05:00:01 Config A/D Result=40 05:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:01 Get A/D filter: -9.255963e+061 result=40 05:00:01 Get A/D value=-858993460 result=40 05:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:01 Parameters OK 05:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:01 Set A/D data flow result=40 05:00:01 Set A/D channel type result=40 05:00:01 Set A/D encoding result=40 05:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:01 Set channel filter=0.000000e+000 result=40 05:00:01 Config A/D Result=40 05:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:01 Get A/D filter: -9.255963e+061 result=40 05:00:01 Get A/D value=-858993460 result=40 05:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:01 Aux= 05:00:01 Message to Camera, serial 105585 queued 05:00:38 Received message from Master: op=PointingHead serial=105598 05:00:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:00:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:00:39 Point started: ret=0 05:00:39 point_skyscan result=0 05:00:39 Check angles 05:00:39 SkyScan query 05:00:40 SkyScan query done: ret=0 az=152.955<-10197 ze=8.865<-11409 Statuses=0009 0009 05:00:40 Msec=0 True Az=152.955 Ze=8.865 Az status=0009 Ze status=0009 05:00:40 Check angles 05:00:40 SkyScan query 05:00:41 SkyScan query done: ret=0 az=135.555<-9037 ze=-12.165<-12811 Statuses=0009 0009 05:00:41 Msec=750 True Az=135.555 Ze=-12.165 Az status=0009 Ze status=0009 05:00:41 Check angles 05:00:41 SkyScan query 05:00:41 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.42<-14228 Statuses=0009 0009 05:00:41 Msec=1500 True Az=117.555 Ze=-33.42 Az status=0009 Ze status=0009 05:00:42 Check angles 05:00:42 SkyScan query 05:00:42 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.54<-15436 Statuses=0009 0009 05:00:42 Msec=2250 True Az=100.26 Ze=-51.54 Az status=0009 Ze status=0009 05:00:42 Check angles 05:00:42 SkyScan query 05:00:43 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:00:43 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:00:43 Check angles 05:00:43 SkyScan query 05:00:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:00:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:00:44 Message to Master queued w/err=0: serial=105598 error=0 05:00:49 Received message from Master: op=Filter serial=105599 05:00:49 Color wheel filter change from 0 to 0 05:00:49 FLIGetFilterPos err=0 currentPosition=0 05:00:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:49 Filter is already there-color wheel unchanged 05:00:49 Received message from Master: op=Shutter serial=105600 05:00:49 Shutter LASER close 05:00:49 Received message from Camera: op=State serial=105602 05:00:49 GetSingleValue result=40 Value=cccccccc 05:00:49 SkyScan query 05:00:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:00:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:50 Parameters OK 05:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:50 Set A/D data flow result=40 05:00:50 Set A/D channel type result=40 05:00:50 Set A/D encoding result=40 05:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:50 Set channel filter=0.000000e+000 result=40 05:00:50 Config A/D Result=40 05:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:50 Get A/D filter: -9.255963e+061 result=40 05:00:50 Get A/D value=-858993460 result=40 05:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:50 Parameters OK 05:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:50 Set A/D data flow result=40 05:00:50 Set A/D channel type result=40 05:00:50 Set A/D encoding result=40 05:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:50 Set channel filter=0.000000e+000 result=40 05:00:50 Config A/D Result=40 05:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:50 Get A/D filter: -9.255963e+061 result=40 05:00:50 Get A/D value=-858993460 result=40 05:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:50 Aux= 05:00:50 Message to Camera, serial 105602 queued 05:01:26 Received message from Master: op=PointingHead serial=105615 05:01:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:01:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:01:27 Point started: ret=0 05:01:27 point_skyscan result=0 05:01:27 Check angles 05:01:27 SkyScan query 05:01:28 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.525<-17435 Statuses=0009 0009 05:01:28 Msec=0 True Az=109.2 Ze=-81.525 Az status=0009 Ze status=0009 05:01:28 Check angles 05:01:28 SkyScan query 05:01:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.93<-18862 Statuses=0008 0009 05:01:29 Msec=750 True Az=112.995 Ze=-102.93 Az status=0008 Ze status=0009 05:01:29 Check angles 05:01:29 SkyScan query 05:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 05:01:30 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 05:01:30 Check angles 05:01:30 SkyScan query 05:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 05:01:30 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 05:01:30 Check angles 05:01:30 SkyScan query 05:01:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 05:01:31 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 05:01:31 Check angles 05:01:31 SkyScan query 05:01:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:01:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:01:32 Message to Master queued w/err=0: serial=105615 error=0 05:01:37 Received message from Master: op=Filter serial=105616 05:01:37 Color wheel filter change from 0 to 0 05:01:37 FLIGetFilterPos err=0 currentPosition=0 05:01:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:37 Filter is already there-color wheel unchanged 05:01:37 Received message from Master: op=Shutter serial=105617 05:01:37 Shutter LASER open 05:01:37 Received message from Camera: op=State serial=105619 05:01:37 GetSingleValue result=40 Value=cccccccc 05:01:37 SkyScan query 05:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:01:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:38 Parameters OK 05:01:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:38 Set A/D data flow result=40 05:01:38 Set A/D channel type result=40 05:01:38 Set A/D encoding result=40 05:01:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:38 Set channel filter=0.000000e+000 result=40 05:01:38 Config A/D Result=40 05:01:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:38 Get A/D filter: -9.255963e+061 result=40 05:01:38 Get A/D value=-858993460 result=40 05:01:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:38 Parameters OK 05:01:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:38 Set A/D data flow result=40 05:01:38 Set A/D channel type result=40 05:01:38 Set A/D encoding result=40 05:01:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:38 Set channel filter=0.000000e+000 result=40 05:01:38 Config A/D Result=40 05:01:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:38 Get A/D filter: -9.255963e+061 result=40 05:01:38 Get A/D value=-858993460 result=40 05:01:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:38 Aux= 05:01:38 Message to Camera, serial 105619 queued 05:01:46 Received message from Master: op=Shutter serial=105629 05:01:46 Shutter LASER close 05:01:47 Received message from Master: op=PointingHead serial=105633 05:01:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:01:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:01:47 Point started: ret=0 05:01:47 point_skyscan result=0 05:01:48 Check angles 05:01:48 SkyScan query 05:01:48 SkyScan query done: ret=0 az=89.895<-5993 ze=157.305<-1513 Statuses=0009 0009 05:01:48 Msec=0 True Az=89.895 Ze=157.305 Az status=0009 Ze status=0009 05:01:48 Check angles 05:01:48 SkyScan query 05:01:49 SkyScan query done: ret=0 az=72.555<-4837 ze=136.32<-2912 Statuses=0009 0009 05:01:49 Msec=750 True Az=72.555 Ze=136.32 Az status=0009 Ze status=0009 05:01:49 Check angles 05:01:49 SkyScan query 05:01:50 SkyScan query done: ret=0 az=55.065<-3671 ze=115.41<-4306 Statuses=0009 0009 05:01:50 Msec=1500 True Az=55.065 Ze=115.41 Az status=0009 Ze status=0009 05:01:50 Check angles 05:01:50 SkyScan query 05:01:51 SkyScan query done: ret=0 az=40.845<-2723 ze=94.41<-5706 Statuses=0009 0009 05:01:51 Msec=2250 True Az=40.845 Ze=94.41 Az status=0009 Ze status=0009 05:01:51 Check angles 05:01:51 SkyScan query 05:01:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.485<-7101 Statuses=0008 0009 05:01:51 Msec=3000 True Az=40.995 Ze=73.485 Az status=0008 Ze status=0009 05:01:51 Check angles 05:01:51 SkyScan query 05:01:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.89<-8474 Statuses=0008 0009 05:01:52 Msec=3750 True Az=40.995 Ze=52.89 Az status=0008 Ze status=0009 05:01:52 Check angles 05:01:52 SkyScan query 05:01:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:01:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:01:53 Message to Master queued w/err=0: serial=105633 error=0 05:01:58 Received message from Master: op=Filter serial=105634 05:01:58 Color wheel filter change from 0 to 0 05:01:58 FLIGetFilterPos err=0 currentPosition=0 05:01:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:58 Filter is already there-color wheel unchanged 05:01:58 Received message from Master: op=Shutter serial=105635 05:01:58 Shutter LASER close 05:01:58 Received message from Camera: op=State serial=105637 05:01:58 GetSingleValue result=40 Value=cccccccc 05:01:58 SkyScan query 05:01:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:01:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:59 Parameters OK 05:01:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:59 Set A/D data flow result=40 05:01:59 Set A/D channel type result=40 05:01:59 Set A/D encoding result=40 05:01:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:59 Set channel filter=0.000000e+000 result=40 05:01:59 Config A/D Result=40 05:01:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:59 Get A/D filter: -9.255963e+061 result=40 05:01:59 Get A/D value=-858993460 result=40 05:01:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:59 Parameters OK 05:01:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:59 Set A/D data flow result=40 05:01:59 Set A/D channel type result=40 05:01:59 Set A/D encoding result=40 05:01:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:59 Set channel filter=0.000000e+000 result=40 05:01:59 Config A/D Result=40 05:01:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:59 Get A/D filter: -9.255963e+061 result=40 05:01:59 Get A/D value=-858993460 result=40 05:01:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:59 Aux= 05:01:59 Message to Camera, serial 105637 queued 05:02:36 Received message from Master: op=PointingHead serial=105650 05:02:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:02:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:02:36 Point started: ret=0 05:02:36 point_skyscan result=0 05:02:37 Check angles 05:02:37 SkyScan query 05:02:37 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 05:02:37 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 05:02:37 Check angles 05:02:37 SkyScan query 05:02:38 SkyScan query done: ret=0 az=81.645<-5443 ze=66.495<-7567 Statuses=0009 0008 05:02:38 Msec=750 True Az=81.645 Ze=66.495 Az status=0009 Ze status=0008 05:02:38 Check angles 05:02:38 SkyScan query 05:02:39 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 05:02:39 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 05:02:39 Check angles 05:02:39 SkyScan query 05:02:39 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 05:02:39 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 05:02:40 Check angles 05:02:40 SkyScan query 05:02:40 SkyScan query done: ret=0 az=134.55<-8970 ze=66.495<-7567 Statuses=0009 0008 05:02:40 Msec=3000 True Az=134.55 Ze=66.495 Az status=0009 Ze status=0008 05:02:40 Check angles 05:02:40 SkyScan query 05:02:41 SkyScan query done: ret=0 az=152.4<-10160 ze=66.495<-7567 Statuses=0009 0008 05:02:41 Msec=3750 True Az=152.4 Ze=66.495 Az status=0009 Ze status=0008 05:02:41 Check angles 05:02:41 SkyScan query 05:02:42 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:02:42 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:02:42 Message to Master queued w/err=0: serial=105650 error=0 05:02:47 Received message from Master: op=Filter serial=105651 05:02:47 Color wheel filter change from 0 to 0 05:02:47 FLIGetFilterPos err=0 currentPosition=0 05:02:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:47 Filter is already there-color wheel unchanged 05:02:47 Received message from Master: op=Shutter serial=105652 05:02:47 Shutter LASER close 05:02:47 Received message from Camera: op=State serial=105654 05:02:47 GetSingleValue result=40 Value=cccccccc 05:02:47 SkyScan query 05:02:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:02:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:48 Parameters OK 05:02:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:48 Set A/D data flow result=40 05:02:48 Set A/D channel type result=40 05:02:48 Set A/D encoding result=40 05:02:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:48 Set channel filter=0.000000e+000 result=40 05:02:48 Config A/D Result=40 05:02:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:48 Get A/D filter: -9.255963e+061 result=40 05:02:48 Get A/D value=-858993460 result=40 05:02:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:48 Parameters OK 05:02:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:48 Set A/D data flow result=40 05:02:48 Set A/D channel type result=40 05:02:48 Set A/D encoding result=40 05:02:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:48 Set channel filter=0.000000e+000 result=40 05:02:48 Config A/D Result=40 05:02:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:48 Get A/D filter: -9.255963e+061 result=40 05:02:48 Get A/D value=-858993460 result=40 05:02:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:48 Aux= 05:02:48 Message to Camera, serial 105654 queued 05:03:24 Received message from Master: op=PointingHead serial=105667 05:03:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:03:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:03:25 Point started: ret=0 05:03:25 point_skyscan result=0 05:03:25 Check angles 05:03:25 SkyScan query 05:03:26 SkyScan query done: ret=0 az=134.655<-8977 ze=36.48<-9568 Statuses=0009 0009 05:03:26 Msec=0 True Az=134.655 Ze=36.48 Az status=0009 Ze status=0009 05:03:26 Check angles 05:03:26 SkyScan query 05:03:27 SkyScan query done: ret=0 az=117.21<-7814 ze=15.54<-10964 Statuses=0009 0009 05:03:27 Msec=750 True Az=117.21 Ze=15.54 Az status=0009 Ze status=0009 05:03:27 Check angles 05:03:27 SkyScan query 05:03:28 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.445<-12363 Statuses=0009 0009 05:03:28 Msec=1500 True Az=99.93 Ze=-5.445 Az status=0009 Ze status=0009 05:03:28 Check angles 05:03:28 SkyScan query 05:03:28 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.385<-13759 Statuses=0009 0009 05:03:28 Msec=2250 True Az=82.365 Ze=-26.385 Az status=0009 Ze status=0009 05:03:28 Check angles 05:03:28 SkyScan query 05:03:29 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.565<-14571 Statuses=0009 0008 05:03:29 Msec=3000 True Az=64.77 Ze=-38.565 Az status=0009 Ze status=0008 05:03:29 Check angles 05:03:29 SkyScan query 05:03:30 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.535<-14569 Statuses=0009 0008 05:03:30 Msec=3750 True Az=47.445 Ze=-38.535 Az status=0009 Ze status=0008 05:03:30 Check angles 05:03:30 SkyScan query 05:03:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:03:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:03:31 Message to Master queued w/err=0: serial=105667 error=0 05:03:36 Received message from Master: op=Filter serial=105668 05:03:36 Color wheel filter change from 0 to 0 05:03:36 FLIGetFilterPos err=0 currentPosition=0 05:03:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:36 Filter is already there-color wheel unchanged 05:03:36 Received message from Master: op=Shutter serial=105669 05:03:36 Shutter LASER close 05:03:36 Received message from Camera: op=State serial=105671 05:03:36 GetSingleValue result=40 Value=cccccccc 05:03:36 SkyScan query 05:03:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:03:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:36 Parameters OK 05:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:36 Set A/D data flow result=40 05:03:36 Set A/D channel type result=40 05:03:36 Set A/D encoding result=40 05:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:36 Set channel filter=0.000000e+000 result=40 05:03:36 Config A/D Result=40 05:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:36 Get A/D filter: -9.255963e+061 result=40 05:03:36 Get A/D value=-858993460 result=40 05:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:36 Parameters OK 05:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:36 Set A/D data flow result=40 05:03:36 Set A/D channel type result=40 05:03:36 Set A/D encoding result=40 05:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:36 Set channel filter=0.000000e+000 result=40 05:03:36 Config A/D Result=40 05:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:36 Get A/D filter: -9.255963e+061 result=40 05:03:36 Get A/D value=-858993460 result=40 05:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:36 Aux= 05:03:36 Message to Camera, serial 105671 queued 05:04:13 Received message from Master: op=PointingHead serial=105684 05:04:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:04:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:04:13 Point started: ret=0 05:04:13 point_skyscan result=0 05:04:14 Check angles 05:04:14 SkyScan query 05:04:15 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.58<-16572 Statuses=0009 0009 05:04:15 Msec=0 True Az=64.2 Ze=-68.58 Az status=0009 Ze status=0009 05:04:15 Check angles 05:04:15 SkyScan query 05:04:16 SkyScan query done: ret=0 az=82.005<-5467 ze=-89.985<-17999 Statuses=0009 0009 05:04:16 Msec=750 True Az=82.005 Ze=-89.985 Az status=0009 Ze status=0009 05:04:16 Check angles 05:04:16 SkyScan query 05:04:16 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.955<-19397 Statuses=0009 0009 05:04:16 Msec=1500 True Az=99.6 Ze=-110.955 Az status=0009 Ze status=0009 05:04:17 Check angles 05:04:17 SkyScan query 05:04:17 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.88<-20792 Statuses=0009 0009 05:04:17 Msec=2250 True Az=117.105 Ze=-131.88 Az status=0009 Ze status=0009 05:04:17 Check angles 05:04:17 SkyScan query 05:04:18 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.555<-21437 Statuses=0009 0008 05:04:18 Msec=3000 True Az=131.145 Ze=-141.555 Az status=0009 Ze status=0008 05:04:18 Check angles 05:04:18 SkyScan query 05:04:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 05:04:19 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 05:04:19 Message to Master queued w/err=0: serial=105684 error=0 05:04:24 Received message from Master: op=Filter serial=105685 05:04:24 Color wheel filter change from 0 to 0 05:04:24 FLIGetFilterPos err=0 currentPosition=0 05:04:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:24 Filter is already there-color wheel unchanged 05:04:24 Received message from Master: op=Shutter serial=105686 05:04:24 Shutter LASER close 05:04:24 Received message from Camera: op=State serial=105688 05:04:24 GetSingleValue result=40 Value=cccccccc 05:04:24 SkyScan query 05:04:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:04:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:24 Parameters OK 05:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:24 Set A/D data flow result=40 05:04:24 Set A/D channel type result=40 05:04:24 Set A/D encoding result=40 05:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:24 Set channel filter=0.000000e+000 result=40 05:04:24 Config A/D Result=40 05:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:24 Get A/D filter: -9.255963e+061 result=40 05:04:24 Get A/D value=-858993460 result=40 05:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:24 Parameters OK 05:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:24 Set A/D data flow result=40 05:04:24 Set A/D channel type result=40 05:04:24 Set A/D encoding result=40 05:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:24 Set channel filter=0.000000e+000 result=40 05:04:24 Config A/D Result=40 05:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:24 Get A/D filter: -9.255963e+061 result=40 05:04:24 Get A/D value=-858993460 result=40 05:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:24 Aux= 05:04:24 Message to Camera, serial 105688 queued 05:05:01 Received message from Master: op=PointingHead serial=105701 05:05:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:05:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:05:02 Point started: ret=0 05:05:02 point_skyscan result=0 05:05:02 Check angles 05:05:02 SkyScan query 05:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 05:05:03 Msec=0 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 05:05:03 Check angles 05:05:03 SkyScan query 05:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:05:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:05:04 Message to Master queued w/err=0: serial=105701 error=0 05:05:09 Received message from Master: op=Filter serial=105702 05:05:09 Color wheel filter change from 0 to 0 05:05:09 FLIGetFilterPos err=0 currentPosition=0 05:05:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:09 Filter is already there-color wheel unchanged 05:05:09 Received message from Master: op=Shutter serial=105703 05:05:09 Shutter LASER open 05:05:09 Received message from Camera: op=State serial=105705 05:05:09 GetSingleValue result=40 Value=cccccccc 05:05:09 SkyScan query 05:05:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:05:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:10 Parameters OK 05:05:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:10 Set A/D data flow result=40 05:05:10 Set A/D channel type result=40 05:05:10 Set A/D encoding result=40 05:05:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:10 Set channel filter=0.000000e+000 result=40 05:05:10 Config A/D Result=40 05:05:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:10 Get A/D filter: -9.255963e+061 result=40 05:05:10 Get A/D value=-858993460 result=40 05:05:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:10 Parameters OK 05:05:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:10 Set A/D data flow result=40 05:05:10 Set A/D channel type result=40 05:05:10 Set A/D encoding result=40 05:05:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:10 Set channel filter=0.000000e+000 result=40 05:05:10 Config A/D Result=40 05:05:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:10 Get A/D filter: -9.255963e+061 result=40 05:05:10 Get A/D value=-858993460 result=40 05:05:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:10 Aux= 05:05:10 Message to Camera, serial 105705 queued 05:05:18 Received message from Master: op=Shutter serial=105715 05:05:18 Shutter LASER close 05:05:19 Received message from Master: op=PointingHead serial=105719 05:05:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:05:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:05:19 Point started: ret=0 05:05:19 point_skyscan result=0 05:05:20 Check angles 05:05:20 SkyScan query 05:05:20 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.995<-21533 Statuses=0009 0009 05:05:20 Msec=0 True Az=136.185 Ze=-142.995 Az status=0009 Ze status=0009 05:05:21 Check angles 05:05:21 SkyScan query 05:05:21 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.025<-20135 Statuses=0009 0009 05:05:21 Msec=750 True Az=153.63 Ze=-122.025 Az status=0009 Ze status=0009 05:05:21 Check angles 05:05:21 SkyScan query 05:05:22 SkyScan query done: ret=0 az=171.255<-11417 ze=-101.13<-18742 Statuses=0009 0009 05:05:22 Msec=1500 True Az=171.255 Ze=-101.13 Az status=0009 Ze status=0009 05:05:22 Check angles 05:05:22 SkyScan query 05:05:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 05:05:23 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 05:05:23 Check angles 05:05:23 SkyScan query 05:05:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.19<-15946 Statuses=0008 0009 05:05:23 Msec=3000 True Az=176.01 Ze=-59.19 Az status=0008 Ze status=0009 05:05:24 Check angles 05:05:24 SkyScan query 05:05:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:05:24 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:05:24 Message to Master queued w/err=0: serial=105719 error=0 05:05:29 Received message from Master: op=Filter serial=105720 05:05:29 Color wheel filter change from 0 to 0 05:05:29 FLIGetFilterPos err=0 currentPosition=0 05:05:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:29 Filter is already there-color wheel unchanged 05:05:29 Received message from Master: op=Shutter serial=105721 05:05:29 Shutter LASER close 05:05:30 Received message from Camera: op=State serial=105723 05:05:30 GetSingleValue result=40 Value=cccccccc 05:05:30 SkyScan query 05:05:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:05:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:30 Parameters OK 05:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:30 Set A/D data flow result=40 05:05:30 Set A/D channel type result=40 05:05:30 Set A/D encoding result=40 05:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:30 Set channel filter=0.000000e+000 result=40 05:05:30 Config A/D Result=40 05:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:30 Get A/D filter: -9.255963e+061 result=40 05:05:30 Get A/D value=-858993460 result=40 05:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:30 Parameters OK 05:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:30 Set A/D data flow result=40 05:05:30 Set A/D channel type result=40 05:05:30 Set A/D encoding result=40 05:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:30 Set channel filter=0.000000e+000 result=40 05:05:30 Config A/D Result=40 05:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:30 Get A/D filter: -9.255963e+061 result=40 05:05:30 Get A/D value=-858993460 result=40 05:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:30 Aux= 05:05:30 Message to Camera, serial 105723 queued 05:06:07 Received message from Master: op=PointingHead serial=105736 05:06:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:06:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:06:07 Point started: ret=0 05:06:07 point_skyscan result=0 05:06:08 Check angles 05:06:08 SkyScan query 05:06:09 SkyScan query done: ret=0 az=152.895<-10193 ze=-21.615<-13441 Statuses=0009 0009 05:06:09 Msec=0 True Az=152.895 Ze=-21.615 Az status=0009 Ze status=0009 05:06:09 Check angles 05:06:09 SkyScan query 05:06:09 SkyScan query done: ret=0 az=134.985<-8999 ze=-0.18<-12012 Statuses=0009 0009 05:06:09 Msec=750 True Az=134.985 Ze=-0.18 Az status=0009 Ze status=0009 05:06:10 Check angles 05:06:10 SkyScan query [UTC 2018-12-13 05:06:10] 05:06:10 SkyScan query done: ret=0 az=117.48<-7832 ze=20.745<-10617 Statuses=0009 0009 05:06:10 Msec=1500 True Az=117.48 Ze=20.745 Az status=0009 Ze status=0009 05:06:10 Check angles 05:06:10 SkyScan query 05:06:11 SkyScan query done: ret=0 az=100.11<-6674 ze=41.73<-9218 Statuses=0009 0009 05:06:11 Msec=2250 True Az=100.11 Ze=41.73 Az status=0009 Ze status=0009 05:06:11 Check angles 05:06:11 SkyScan query 05:06:12 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:06:12 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:06:12 Check angles 05:06:12 SkyScan query 05:06:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:06:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:06:12 Message to Master queued w/err=0: serial=105736 error=0 05:06:17 Received message from Master: op=Filter serial=105737 05:06:17 Color wheel filter change from 0 to 0 05:06:17 FLIGetFilterPos err=0 currentPosition=0 05:06:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:17 Filter is already there-color wheel unchanged 05:06:18 Received message from Master: op=Shutter serial=105738 05:06:18 Shutter LASER close 05:06:18 Received message from Camera: op=State serial=105740 05:06:18 GetSingleValue result=40 Value=cccccccc 05:06:18 SkyScan query 05:06:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:06:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:18 Parameters OK 05:06:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:18 Set A/D data flow result=40 05:06:18 Set A/D channel type result=40 05:06:18 Set A/D encoding result=40 05:06:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:18 Set channel filter=0.000000e+000 result=40 05:06:18 Config A/D Result=40 05:06:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:18 Get A/D filter: -9.255963e+061 result=40 05:06:18 Get A/D value=-858993460 result=40 05:06:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:18 Parameters OK 05:06:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:18 Set A/D data flow result=40 05:06:18 Set A/D channel type result=40 05:06:18 Set A/D encoding result=40 05:06:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:18 Set channel filter=0.000000e+000 result=40 05:06:18 Config A/D Result=40 05:06:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:18 Get A/D filter: -9.255963e+061 result=40 05:06:18 Get A/D value=-858993460 result=40 05:06:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:18 Aux= 05:06:18 Message to Camera, serial 105740 queued 05:06:55 Received message from Master: op=PointingHead serial=105753 05:06:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:06:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:06:55 Point started: ret=0 05:06:55 point_skyscan result=0 05:06:56 Check angles 05:06:56 SkyScan query 05:06:57 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 05:06:57 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 05:06:57 Check angles 05:06:57 SkyScan query 05:06:57 SkyScan query done: ret=0 az=127.17<-8478 ze=38.505<-9433 Statuses=0009 0008 05:06:57 Msec=750 True Az=127.17 Ze=38.505 Az status=0009 Ze status=0008 05:06:58 Check angles 05:06:58 SkyScan query 05:06:58 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 05:06:58 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 05:06:58 Check angles 05:06:58 SkyScan query 05:06:59 SkyScan query done: ret=0 az=162.105<-10807 ze=38.505<-9433 Statuses=0009 0008 05:06:59 Msec=2250 True Az=162.105 Ze=38.505 Az status=0009 Ze status=0008 05:06:59 Check angles 05:06:59 SkyScan query 05:07:00 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:07:00 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:07:00 Check angles 05:07:00 SkyScan query 05:07:00 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:07:00 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:07:00 Message to Master queued w/err=0: serial=105753 error=0 05:07:05 Received message from Master: op=Filter serial=105754 05:07:05 Color wheel filter change from 0 to 0 05:07:05 FLIGetFilterPos err=0 currentPosition=0 05:07:05 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:05 Filter is already there-color wheel unchanged 05:07:06 Received message from Master: op=Shutter serial=105755 05:07:06 Shutter LASER close 05:07:06 Received message from Camera: op=State serial=105757 05:07:06 GetSingleValue result=40 Value=cccccccc 05:07:06 SkyScan query 05:07:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:07:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:06 Parameters OK 05:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:06 Set A/D data flow result=40 05:07:06 Set A/D channel type result=40 05:07:06 Set A/D encoding result=40 05:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:06 Set channel filter=0.000000e+000 result=40 05:07:06 Config A/D Result=40 05:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:06 Get A/D filter: -9.255963e+061 result=40 05:07:06 Get A/D value=-858993460 result=40 05:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:06 Parameters OK 05:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:06 Set A/D data flow result=40 05:07:06 Set A/D channel type result=40 05:07:06 Set A/D encoding result=40 05:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:06 Set channel filter=0.000000e+000 result=40 05:07:06 Config A/D Result=40 05:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:06 Get A/D filter: -9.255963e+061 result=40 05:07:06 Get A/D value=-858993460 result=40 05:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:06 Aux= 05:07:06 Message to Camera, serial 105757 queued 05:07:43 Received message from Master: op=PointingHead serial=105770 05:07:43 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:07:43 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:07:43 Point started: ret=0 05:07:43 point_skyscan result=0 05:07:44 Check angles 05:07:44 SkyScan query 05:07:45 SkyScan query done: ret=0 az=153.105<-10207 ze=8.79<-11414 Statuses=0009 0009 05:07:45 Msec=0 True Az=153.105 Ze=8.79 Az status=0009 Ze status=0009 05:07:45 Check angles 05:07:45 SkyScan query 05:07:46 SkyScan query done: ret=0 az=135.645<-9043 ze=-12.18<-12812 Statuses=0009 0009 05:07:46 Msec=750 True Az=135.645 Ze=-12.18 Az status=0009 Ze status=0009 05:07:46 Check angles 05:07:46 SkyScan query 05:07:46 SkyScan query done: ret=0 az=118.05<-7870 ze=-33.105<-14207 Statuses=0009 0009 05:07:46 Msec=1500 True Az=118.05 Ze=-33.105 Az status=0009 Ze status=0009 05:07:46 Check angles 05:07:46 SkyScan query 05:07:47 SkyScan query done: ret=0 az=100.725<-6715 ze=-51.525<-15435 Statuses=0009 0009 05:07:47 Msec=2250 True Az=100.725 Ze=-51.525 Az status=0009 Ze status=0009 05:07:47 Check angles 05:07:47 SkyScan query 05:07:48 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:07:48 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:07:48 Check angles 05:07:48 SkyScan query 05:07:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:07:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:07:49 Message to Master queued w/err=0: serial=105770 error=0 05:07:54 Received message from Master: op=Filter serial=105771 05:07:54 Color wheel filter change from 0 to 0 05:07:54 FLIGetFilterPos err=0 currentPosition=0 05:07:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:54 Filter is already there-color wheel unchanged 05:07:54 Received message from Master: op=Shutter serial=105772 05:07:54 Shutter LASER close 05:07:54 Received message from Camera: op=State serial=105774 05:07:54 GetSingleValue result=40 Value=cccccccc 05:07:54 SkyScan query 05:07:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:07:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:54 Parameters OK 05:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:54 Set A/D data flow result=40 05:07:54 Set A/D channel type result=40 05:07:54 Set A/D encoding result=40 05:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:54 Set channel filter=0.000000e+000 result=40 05:07:54 Config A/D Result=40 05:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:54 Get A/D filter: -9.255963e+061 result=40 05:07:54 Get A/D value=-858993460 result=40 05:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:54 Parameters OK 05:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:54 Set A/D data flow result=40 05:07:54 Set A/D channel type result=40 05:07:54 Set A/D encoding result=40 05:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:54 Set channel filter=0.000000e+000 result=40 05:07:54 Config A/D Result=40 05:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:54 Get A/D filter: -9.255963e+061 result=40 05:07:54 Get A/D value=-858993460 result=40 05:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:54 Aux= 05:07:54 Message to Camera, serial 105774 queued 05:08:31 Received message from Master: op=PointingHead serial=105787 05:08:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:08:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:08:32 Point started: ret=0 05:08:32 point_skyscan result=0 05:08:32 Check angles 05:08:32 SkyScan query 05:08:33 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.42<-17428 Statuses=0009 0009 05:08:33 Msec=0 True Az=109.14 Ze=-81.42 Az status=0009 Ze status=0009 05:08:33 Check angles 05:08:33 SkyScan query 05:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 05:08:34 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 05:08:34 Check angles 05:08:34 SkyScan query 05:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 05:08:34 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 05:08:35 Check angles 05:08:35 SkyScan query 05:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 05:08:35 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 05:08:35 Check angles 05:08:35 SkyScan query 05:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 05:08:36 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 05:08:36 Check angles 05:08:36 SkyScan query 05:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:08:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:08:37 Message to Master queued w/err=0: serial=105787 error=0 05:08:42 Received message from Master: op=Filter serial=105788 05:08:42 Color wheel filter change from 0 to 0 05:08:42 FLIGetFilterPos err=0 currentPosition=0 05:08:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:42 Filter is already there-color wheel unchanged 05:08:42 Received message from Master: op=Shutter serial=105789 05:08:42 Shutter LASER open 05:08:42 Received message from Camera: op=State serial=105791 05:08:42 GetSingleValue result=40 Value=cccccccc 05:08:42 SkyScan query 05:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:08:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:43 Parameters OK 05:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:43 Set A/D data flow result=40 05:08:43 Set A/D channel type result=40 05:08:43 Set A/D encoding result=40 05:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:43 Set channel filter=0.000000e+000 result=40 05:08:43 Config A/D Result=40 05:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:43 Get A/D filter: -9.255963e+061 result=40 05:08:43 Get A/D value=-858993460 result=40 05:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:43 Parameters OK 05:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:43 Set A/D data flow result=40 05:08:43 Set A/D channel type result=40 05:08:43 Set A/D encoding result=40 05:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:43 Set channel filter=0.000000e+000 result=40 05:08:43 Config A/D Result=40 05:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:43 Get A/D filter: -9.255963e+061 result=40 05:08:43 Get A/D value=-858993460 result=40 05:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:43 Aux= 05:08:43 Message to Camera, serial 105791 queued 05:08:51 Received message from Master: op=Shutter serial=105801 05:08:51 Shutter LASER close 05:08:51 Received message from Master: op=PointingHead serial=105805 05:08:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:08:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:08:52 Point started: ret=0 05:08:52 point_skyscan result=0 05:08:52 Check angles 05:08:52 SkyScan query 05:08:53 SkyScan query done: ret=0 az=89.88<-5992 ze=157.095<-1527 Statuses=0009 0009 05:08:53 Msec=0 True Az=89.88 Ze=157.095 Az status=0009 Ze status=0009 05:08:53 Check angles 05:08:53 SkyScan query 05:08:54 SkyScan query done: ret=0 az=72.3<-4820 ze=136.14<-2924 Statuses=0009 0009 05:08:54 Msec=750 True Az=72.3 Ze=136.14 Az status=0009 Ze status=0009 05:08:54 Check angles 05:08:54 SkyScan query 05:08:55 SkyScan query done: ret=0 az=54.735<-3649 ze=114.735<-4351 Statuses=0009 0009 05:08:55 Msec=1500 True Az=54.735 Ze=114.735 Az status=0009 Ze status=0009 05:08:55 Check angles 05:08:55 SkyScan query 05:08:55 SkyScan query done: ret=0 az=40.905<-2727 ze=93.78<-5748 Statuses=0009 0009 05:08:55 Msec=2250 True Az=40.905 Ze=93.78 Az status=0009 Ze status=0009 05:08:55 Check angles 05:08:55 SkyScan query 05:08:56 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 05:08:56 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 05:08:56 Check angles 05:08:56 SkyScan query 05:08:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 05:08:57 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 05:08:57 Check angles 05:08:57 SkyScan query 05:08:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:08:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:08:58 Message to Master queued w/err=0: serial=105805 error=0 05:09:03 Received message from Master: op=Filter serial=105806 05:09:03 Color wheel filter change from 0 to 0 05:09:03 FLIGetFilterPos err=0 currentPosition=0 05:09:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:03 Filter is already there-color wheel unchanged 05:09:03 Received message from Master: op=Shutter serial=105807 05:09:03 Shutter LASER close 05:09:03 Received message from Camera: op=State serial=105809 05:09:03 GetSingleValue result=40 Value=cccccccc 05:09:03 SkyScan query 05:09:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:09:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:03 Parameters OK 05:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:03 Set A/D data flow result=40 05:09:03 Set A/D channel type result=40 05:09:03 Set A/D encoding result=40 05:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:03 Set channel filter=0.000000e+000 result=40 05:09:03 Config A/D Result=40 05:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:03 Get A/D filter: -9.255963e+061 result=40 05:09:03 Get A/D value=-858993460 result=40 05:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:03 Parameters OK 05:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:03 Set A/D data flow result=40 05:09:03 Set A/D channel type result=40 05:09:03 Set A/D encoding result=40 05:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:03 Set channel filter=0.000000e+000 result=40 05:09:03 Config A/D Result=40 05:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:03 Get A/D filter: -9.255963e+061 result=40 05:09:03 Get A/D value=-858993460 result=40 05:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:03 Aux= 05:09:03 Message to Camera, serial 105809 queued 05:09:41 Received message from Master: op=PointingHead serial=105821 05:09:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:09:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:09:41 Point started: ret=0 05:09:41 point_skyscan result=0 05:09:42 Check angles 05:09:42 SkyScan query 05:09:43 SkyScan query done: ret=0 az=65.445<-4363 ze=66.555<-7563 Statuses=0009 0008 05:09:43 Msec=0 True Az=65.445 Ze=66.555 Az status=0009 Ze status=0008 05:09:43 Check angles 05:09:43 SkyScan query 05:09:43 SkyScan query done: ret=0 az=82.995<-5533 ze=66.51<-7566 Statuses=0009 0008 05:09:43 Msec=750 True Az=82.995 Ze=66.51 Az status=0009 Ze status=0008 05:09:44 Check angles 05:09:44 SkyScan query 05:09:44 SkyScan query done: ret=0 az=100.68<-6712 ze=66.495<-7567 Statuses=0009 0008 05:09:44 Msec=1500 True Az=100.68 Ze=66.495 Az status=0009 Ze status=0008 05:09:44 Check angles 05:09:44 SkyScan query 05:09:45 SkyScan query done: ret=0 az=118.185<-7879 ze=66.495<-7567 Statuses=0009 0008 05:09:45 Msec=2250 True Az=118.185 Ze=66.495 Az status=0009 Ze status=0008 05:09:45 Check angles 05:09:45 SkyScan query 05:09:46 SkyScan query done: ret=0 az=135.645<-9043 ze=66.495<-7567 Statuses=0009 0008 05:09:46 Msec=3000 True Az=135.645 Ze=66.495 Az status=0009 Ze status=0008 05:09:46 Check angles 05:09:46 SkyScan query 05:09:46 SkyScan query done: ret=0 az=153.36<-10224 ze=66.495<-7567 Statuses=0009 0008 05:09:46 Msec=3750 True Az=153.36 Ze=66.495 Az status=0009 Ze status=0008 05:09:47 Check angles 05:09:47 SkyScan query 05:09:47 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 05:09:47 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 05:09:47 Message to Master queued w/err=0: serial=105821 error=0 05:09:52 Received message from Master: op=Filter serial=105822 05:09:52 Color wheel filter change from 0 to 0 05:09:52 FLIGetFilterPos err=0 currentPosition=0 05:09:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:52 Filter is already there-color wheel unchanged 05:09:53 Received message from Master: op=Shutter serial=105823 05:09:53 Shutter LASER close 05:09:53 Received message from Camera: op=State serial=105825 05:09:53 GetSingleValue result=40 Value=cccccccc 05:09:53 SkyScan query 05:09:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:09:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:54 Parameters OK 05:09:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:54 Set A/D data flow result=40 05:09:54 Set A/D channel type result=40 05:09:54 Set A/D encoding result=40 05:09:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:54 Set channel filter=0.000000e+000 result=40 05:09:54 Config A/D Result=40 05:09:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:54 Get A/D filter: -9.255963e+061 result=40 05:09:54 Get A/D value=-858993460 result=40 05:09:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:54 Parameters OK 05:09:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:54 Set A/D data flow result=40 05:09:54 Set A/D channel type result=40 05:09:54 Set A/D encoding result=40 05:09:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:54 Set channel filter=0.000000e+000 result=40 05:09:54 Config A/D Result=40 05:09:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:54 Get A/D filter: -9.255963e+061 result=40 05:09:54 Get A/D value=-858993460 result=40 05:09:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:54 Aux= 05:09:54 Message to Camera, serial 105825 queued 05:10:31 Received message from Master: op=PointingHead serial=105836 05:10:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:10:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:10:32 Point started: ret=0 05:10:32 point_skyscan result=0 05:10:32 Check angles 05:10:32 SkyScan query 05:10:33 SkyScan query done: ret=0 az=134.01<-8934 ze=36.36<-9576 Statuses=0009 0009 05:10:33 Msec=0 True Az=134.01 Ze=36.36 Az status=0009 Ze status=0009 05:10:33 Check angles 05:10:33 SkyScan query 05:10:34 SkyScan query done: ret=0 az=116.505<-7767 ze=15.33<-10978 Statuses=0009 0009 05:10:34 Msec=750 True Az=116.505 Ze=15.33 Az status=0009 Ze status=0009 05:10:34 Check angles 05:10:34 SkyScan query 05:10:35 SkyScan query done: ret=0 az=99.075<-6605 ze=-5.64<-12376 Statuses=0009 0009 05:10:35 Msec=1500 True Az=99.075 Ze=-5.64 Az status=0009 Ze status=0009 05:10:35 Check angles 05:10:35 SkyScan query 05:10:35 SkyScan query done: ret=0 az=81.255<-5417 ze=-27.03<-13802 Statuses=0009 0009 05:10:35 Msec=2250 True Az=81.255 Ze=-27.03 Az status=0009 Ze status=0009 05:10:35 Check angles 05:10:35 SkyScan query 05:10:36 SkyScan query done: ret=0 az=64.17<-4278 ze=-38.565<-14571 Statuses=0009 0008 05:10:36 Msec=3000 True Az=64.17 Ze=-38.565 Az status=0009 Ze status=0008 05:10:36 Check angles 05:10:36 SkyScan query 05:10:37 SkyScan query done: ret=0 az=46.59<-3106 ze=-38.535<-14569 Statuses=0009 0008 05:10:37 Msec=3750 True Az=46.59 Ze=-38.535 Az status=0009 Ze status=0008 05:10:37 Check angles 05:10:37 SkyScan query 05:10:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:10:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:10:38 Message to Master queued w/err=0: serial=105836 error=0 05:10:43 Received message from Master: op=Filter serial=105837 05:10:43 Color wheel filter change from 0 to 0 05:10:43 FLIGetFilterPos err=0 currentPosition=0 05:10:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:43 Filter is already there-color wheel unchanged 05:10:44 Received message from Master: op=Shutter serial=105838 05:10:44 Shutter LASER close 05:10:44 Received message from Camera: op=State serial=105840 05:10:44 GetSingleValue result=40 Value=cccccccc 05:10:44 SkyScan query 05:10:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:10:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:45 Parameters OK 05:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:45 Set A/D data flow result=40 05:10:45 Set A/D channel type result=40 05:10:45 Set A/D encoding result=40 05:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:45 Set channel filter=0.000000e+000 result=40 05:10:45 Config A/D Result=40 05:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:45 Get A/D filter: -9.255963e+061 result=40 05:10:45 Get A/D value=-858993460 result=40 05:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:45 Parameters OK 05:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:45 Set A/D data flow result=40 05:10:45 Set A/D channel type result=40 05:10:45 Set A/D encoding result=40 05:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:45 Set channel filter=0.000000e+000 result=40 05:10:45 Config A/D Result=40 05:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:45 Get A/D filter: -9.255963e+061 result=40 05:10:45 Get A/D value=-858993460 result=40 05:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:45 Aux= 05:10:45 Message to Camera, serial 105840 queued 05:11:21 Received message from Master: op=PointingHead serial=105852 05:11:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:11:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:11:21 Point started: ret=0 05:11:21 point_skyscan result=0 05:11:22 Check angles 05:11:22 SkyScan query 05:11:23 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.37<-16558 Statuses=0009 0009 05:11:23 Msec=0 True Az=64.215 Ze=-68.37 Az status=0009 Ze status=0009 05:11:23 Check angles 05:11:23 SkyScan query 05:11:24 SkyScan query done: ret=0 az=82.02<-5468 ze=-89.805<-17987 Statuses=0009 0009 05:11:24 Msec=750 True Az=82.02 Ze=-89.805 Az status=0009 Ze status=0009 05:11:24 Check angles 05:11:24 SkyScan query 05:11:24 SkyScan query done: ret=0 az=100.11<-6674 ze=-111.21<-19414 Statuses=0009 0009 05:11:24 Msec=1500 True Az=100.11 Ze=-111.21 Az status=0009 Ze status=0009 05:11:24 Check angles 05:11:24 SkyScan query 05:11:25 SkyScan query done: ret=0 az=117.42<-7828 ze=-132.09<-20806 Statuses=0009 0009 05:11:25 Msec=2250 True Az=117.42 Ze=-132.09 Az status=0009 Ze status=0009 05:11:25 Check angles 05:11:25 SkyScan query 05:11:26 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 05:11:26 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 05:11:26 Check angles 05:11:26 SkyScan query 05:11:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:11:27 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:11:27 Message to Master queued w/err=0: serial=105852 error=0 05:11:32 Received message from Master: op=Filter serial=105853 05:11:32 Color wheel filter change from 0 to 0 05:11:32 FLIGetFilterPos err=0 currentPosition=0 05:11:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:32 Filter is already there-color wheel unchanged 05:11:32 Received message from Master: op=Shutter serial=105854 05:11:32 Shutter LASER close 05:11:32 Received message from Camera: op=State serial=105856 05:11:32 GetSingleValue result=40 Value=cccccccc 05:11:32 SkyScan query 05:11:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:11:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:32 Parameters OK 05:11:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:32 Set A/D data flow result=40 05:11:32 Set A/D channel type result=40 05:11:32 Set A/D encoding result=40 05:11:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:32 Set channel filter=0.000000e+000 result=40 05:11:32 Config A/D Result=40 05:11:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:32 Get A/D filter: -9.255963e+061 result=40 05:11:32 Get A/D value=-858993460 result=40 05:11:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:32 Parameters OK 05:11:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:32 Set A/D data flow result=40 05:11:32 Set A/D channel type result=40 05:11:32 Set A/D encoding result=40 05:11:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:32 Set channel filter=0.000000e+000 result=40 05:11:32 Config A/D Result=40 05:11:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:32 Get A/D filter: -9.255963e+061 result=40 05:11:32 Get A/D value=-858993460 result=40 05:11:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:32 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:32 Aux= 05:11:32 Message to Camera, serial 105856 queued 05:12:09 Received message from Master: op=PointingHead serial=105868 05:12:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:12:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:12:09 Point started: ret=0 05:12:09 point_skyscan result=0 05:12:10 Check angles 05:12:10 SkyScan query 05:12:10 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 05:12:10 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 05:12:11 Check angles 05:12:11 SkyScan query 05:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:12:11 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:12:11 Message to Master queued w/err=0: serial=105868 error=0 05:12:16 Received message from Master: op=Filter serial=105869 05:12:16 Color wheel filter change from 0 to 0 05:12:16 FLIGetFilterPos err=0 currentPosition=0 05:12:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:16 Filter is already there-color wheel unchanged 05:12:17 Received message from Master: op=Shutter serial=105870 05:12:17 Shutter LASER open 05:12:18 Received message from Camera: op=State serial=105872 05:12:18 GetSingleValue result=40 Value=cccccccc 05:12:18 SkyScan query 05:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:12:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:18 Parameters OK 05:12:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:18 Set A/D data flow result=40 05:12:18 Set A/D channel type result=40 05:12:18 Set A/D encoding result=40 05:12:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:18 Set channel filter=0.000000e+000 result=40 05:12:18 Config A/D Result=40 05:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:18 Get A/D filter: -9.255963e+061 result=40 05:12:18 Get A/D value=-858993460 result=40 05:12:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:18 Parameters OK 05:12:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:18 Set A/D data flow result=40 05:12:18 Set A/D channel type result=40 05:12:18 Set A/D encoding result=40 05:12:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:18 Set channel filter=0.000000e+000 result=40 05:12:18 Config A/D Result=40 05:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:18 Get A/D filter: -9.255963e+061 result=40 05:12:18 Get A/D value=-858993460 result=40 05:12:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:18 Aux= 05:12:18 Message to Camera, serial 105872 queued 05:12:26 Received message from Master: op=Shutter serial=105881 05:12:26 Shutter LASER close 05:12:27 Received message from Master: op=PointingHead serial=105885 05:12:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:12:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:12:28 Point started: ret=0 05:12:28 point_skyscan result=0 05:12:29 Check angles 05:12:29 SkyScan query 05:12:29 SkyScan query done: ret=0 az=136.305<-9087 ze=-143.19<-21546 Statuses=0009 0009 05:12:29 Msec=0 True Az=136.305 Ze=-143.19 Az status=0009 Ze status=0009 05:12:29 Check angles 05:12:29 SkyScan query 05:12:30 SkyScan query done: ret=0 az=154.245<-10283 ze=-121.305<-20087 Statuses=0009 0009 05:12:30 Msec=750 True Az=154.245 Ze=-121.305 Az status=0009 Ze status=0009 05:12:30 Check angles 05:12:30 SkyScan query 05:12:31 SkyScan query done: ret=0 az=172.095<-11473 ze=-99.915<-18661 Statuses=0009 0009 05:12:31 Msec=1500 True Az=172.095 Ze=-99.915 Az status=0009 Ze status=0009 05:12:31 Check angles 05:12:31 SkyScan query 05:12:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 05:12:31 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 05:12:32 Check angles 05:12:32 SkyScan query 05:12:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.035<-15869 Statuses=0008 0009 05:12:32 Msec=3000 True Az=176.01 Ze=-58.035 Az status=0008 Ze status=0009 05:12:32 Check angles 05:12:32 SkyScan query 05:12:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 05:12:33 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 05:12:33 Message to Master queued w/err=0: serial=105885 error=0 05:12:38 Received message from Master: op=Filter serial=105886 05:12:38 Color wheel filter change from 0 to 0 05:12:38 FLIGetFilterPos err=0 currentPosition=0 05:12:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:38 Filter is already there-color wheel unchanged 05:12:38 Received message from Master: op=Shutter serial=105887 05:12:38 Shutter LASER close 05:12:39 Received message from Camera: op=State serial=105889 05:12:39 GetSingleValue result=40 Value=cccccccc 05:12:39 SkyScan query 05:12:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:12:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:40 Parameters OK 05:12:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:40 Set A/D data flow result=40 05:12:40 Set A/D channel type result=40 05:12:40 Set A/D encoding result=40 05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:40 Set channel filter=0.000000e+000 result=40 05:12:40 Config A/D Result=40 05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:40 Get A/D filter: -9.255963e+061 result=40 05:12:40 Get A/D value=-858993460 result=40 05:12:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:40 Parameters OK 05:12:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:40 Set A/D data flow result=40 05:12:40 Set A/D channel type result=40 05:12:40 Set A/D encoding result=40 05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:40 Set channel filter=0.000000e+000 result=40 05:12:40 Config A/D Result=40 05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:40 Get A/D filter: -9.255963e+061 result=40 05:12:40 Get A/D value=-858993460 result=40 05:12:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:40 Aux= 05:12:40 Message to Camera, serial 105889 queued 05:13:16 Received message from Master: op=PointingHead serial=105901 05:13:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:13:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:13:17 Point started: ret=0 05:13:17 point_skyscan result=0 05:13:18 Check angles 05:13:18 SkyScan query 05:13:18 SkyScan query done: ret=0 az=151.47<-10098 ze=-20.595<-13373 Statuses=0009 0009 05:13:18 Msec=0 True Az=151.47 Ze=-20.595 Az status=0009 Ze status=0009 05:13:18 Check angles 05:13:18 SkyScan query 05:13:19 SkyScan query done: ret=0 az=134.505<-8967 ze=-0.15<-12010 Statuses=0009 0009 05:13:19 Msec=750 True Az=134.505 Ze=-0.15 Az status=0009 Ze status=0009 05:13:19 Check angles 05:13:19 SkyScan query 05:13:20 SkyScan query done: ret=0 az=117.09<-7806 ze=20.295<-10647 Statuses=0009 0009 05:13:20 Msec=1500 True Az=117.09 Ze=20.295 Az status=0009 Ze status=0009 05:13:20 Check angles 05:13:20 SkyScan query 05:13:20 SkyScan query done: ret=0 az=99.675<-6645 ze=41.655<-9223 Statuses=0009 0009 05:13:20 Msec=2250 True Az=99.675 Ze=41.655 Az status=0009 Ze status=0009 05:13:21 Check angles 05:13:21 SkyScan query 05:13:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 05:13:21 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 05:13:21 Check angles 05:13:21 SkyScan query 05:13:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:13:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:13:22 Message to Master queued w/err=0: serial=105901 error=0 05:13:27 Received message from Master: op=Filter serial=105902 05:13:27 Color wheel filter change from 0 to 0 05:13:27 FLIGetFilterPos err=0 currentPosition=0 05:13:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:27 Filter is already there-color wheel unchanged 05:13:27 Received message from Master: op=Shutter serial=105903 05:13:27 Shutter LASER close 05:13:27 Received message from Camera: op=State serial=105905 05:13:27 GetSingleValue result=40 Value=cccccccc 05:13:27 SkyScan query 05:13:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:13:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:28 Parameters OK 05:13:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:28 Set A/D data flow result=40 05:13:28 Set A/D channel type result=40 05:13:28 Set A/D encoding result=40 05:13:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:28 Set channel filter=0.000000e+000 result=40 05:13:28 Config A/D Result=40 05:13:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:28 Get A/D filter: -9.255963e+061 result=40 05:13:28 Get A/D value=-858993460 result=40 05:13:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:28 Parameters OK 05:13:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:28 Set A/D data flow result=40 05:13:28 Set A/D channel type result=40 05:13:28 Set A/D encoding result=40 05:13:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:28 Set channel filter=0.000000e+000 result=40 05:13:28 Config A/D Result=40 05:13:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:28 Get A/D filter: -9.255963e+061 result=40 05:13:28 Get A/D value=-858993460 result=40 05:13:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:28 Aux= 05:13:28 Message to Camera, serial 105905 queued 05:14:05 Received message from Master: op=PointingHead serial=105917 05:14:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:14:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:14:05 Point started: ret=0 05:14:05 point_skyscan result=0 05:14:06 Check angles 05:14:06 SkyScan query 05:14:06 SkyScan query done: ret=0 az=109.485<-7299 ze=38.49<-9434 Statuses=0009 0008 05:14:06 Msec=0 True Az=109.485 Ze=38.49 Az status=0009 Ze status=0008 05:14:07 Check angles 05:14:07 SkyScan query 05:14:07 SkyScan query done: ret=0 az=127.275<-8485 ze=38.505<-9433 Statuses=0009 0008 05:14:07 Msec=750 True Az=127.275 Ze=38.505 Az status=0009 Ze status=0008 05:14:07 Check angles 05:14:07 SkyScan query 05:14:08 SkyScan query done: ret=0 az=145.365<-9691 ze=38.505<-9433 Statuses=0009 0008 05:14:08 Msec=1500 True Az=145.365 Ze=38.505 Az status=0009 Ze status=0008 05:14:08 Check angles 05:14:08 SkyScan query 05:14:09 SkyScan query done: ret=0 az=162.255<-10817 ze=38.505<-9433 Statuses=0009 0008 05:14:09 Msec=2250 True Az=162.255 Ze=38.505 Az status=0009 Ze status=0008 05:14:09 Check angles 05:14:09 SkyScan query 05:14:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 05:14:09 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 05:14:10 Check angles 05:14:10 SkyScan query 05:14:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:14:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:14:10 Message to Master queued w/err=0: serial=105917 error=0 05:14:15 Received message from Master: op=Filter serial=105918 05:14:15 Color wheel filter change from 0 to 0 05:14:15 FLIGetFilterPos err=0 currentPosition=0 05:14:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:15 Filter is already there-color wheel unchanged 05:14:16 Received message from Master: op=Shutter serial=105919 05:14:16 Shutter LASER close 05:14:16 Received message from Camera: op=State serial=105921 05:14:16 GetSingleValue result=40 Value=cccccccc 05:14:16 SkyScan query 05:14:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:14:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:17 Parameters OK 05:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:17 Set A/D data flow result=40 05:14:17 Set A/D channel type result=40 05:14:17 Set A/D encoding result=40 05:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:17 Set channel filter=0.000000e+000 result=40 05:14:17 Config A/D Result=40 05:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:17 Get A/D filter: -9.255963e+061 result=40 05:14:17 Get A/D value=-858993460 result=40 05:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:17 Parameters OK 05:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:17 Set A/D data flow result=40 05:14:17 Set A/D channel type result=40 05:14:17 Set A/D encoding result=40 05:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:17 Set channel filter=0.000000e+000 result=40 05:14:17 Config A/D Result=40 05:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:17 Get A/D filter: -9.255963e+061 result=40 05:14:17 Get A/D value=-858993460 result=40 05:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:17 Aux= 05:14:17 Message to Camera, serial 105921 queued 05:14:53 Received message from Master: op=PointingHead serial=105933 05:14:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:14:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:14:54 Point started: ret=0 05:14:54 point_skyscan result=0 05:14:55 Check angles 05:14:55 SkyScan query 05:14:55 SkyScan query done: ret=0 az=152.505<-10167 ze=8.25<-11450 Statuses=0009 0009 05:14:55 Msec=0 True Az=152.505 Ze=8.25 Az status=0009 Ze status=0009 05:14:55 Check angles 05:14:55 SkyScan query 05:14:56 SkyScan query done: ret=0 az=134.895<-8993 ze=-12.75<-12850 Statuses=0009 0009 05:14:56 Msec=750 True Az=134.895 Ze=-12.75 Az status=0009 Ze status=0009 05:14:56 Check angles 05:14:56 SkyScan query 05:14:57 SkyScan query done: ret=0 az=117.465<-7831 ze=-34.05<-14270 Statuses=0009 0009 05:14:57 Msec=1500 True Az=117.465 Ze=-34.05 Az status=0009 Ze status=0009 05:14:57 Check angles 05:14:57 SkyScan query 05:14:57 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.555<-15437 Statuses=0009 0009 05:14:57 Msec=2250 True Az=100.14 Ze=-51.555 Az status=0009 Ze status=0009 05:14:58 Check angles 05:14:58 SkyScan query 05:14:58 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:14:58 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:14:58 Check angles 05:14:58 SkyScan query 05:14:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:14:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:14:59 Message to Master queued w/err=0: serial=105933 error=0 05:15:04 Received message from Master: op=Filter serial=105934 05:15:04 Color wheel filter change from 0 to 0 05:15:04 FLIGetFilterPos err=0 currentPosition=0 05:15:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:04 Filter is already there-color wheel unchanged 05:15:05 Received message from Master: op=Shutter serial=105935 05:15:05 Shutter LASER close 05:15:05 Received message from Camera: op=State serial=105937 05:15:05 GetSingleValue result=40 Value=cccccccc 05:15:05 SkyScan query 05:15:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:15:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:05 Parameters OK 05:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:05 Set A/D data flow result=40 05:15:05 Set A/D channel type result=40 05:15:05 Set A/D encoding result=40 05:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:05 Set channel filter=0.000000e+000 result=40 05:15:05 Config A/D Result=40 05:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:05 Get A/D filter: -9.255963e+061 result=40 05:15:05 Get A/D value=-858993460 result=40 05:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:05 Parameters OK 05:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:05 Set A/D data flow result=40 05:15:05 Set A/D channel type result=40 05:15:05 Set A/D encoding result=40 05:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:05 Set channel filter=0.000000e+000 result=40 05:15:05 Config A/D Result=40 05:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:05 Get A/D filter: -9.255963e+061 result=40 05:15:05 Get A/D value=-858993460 result=40 05:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:05 Aux= 05:15:05 Message to Camera, serial 105937 queued 05:15:27 Received message from Master: op=Identify serial=105938 05:15:43 Received message from Master: op=PointingHead serial=105952 05:15:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:15:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:15:43 Point started: ret=0 05:15:43 point_skyscan result=0 05:15:44 Check angles 05:15:44 SkyScan query 05:15:44 SkyScan query done: ret=0 az=110.055<-7337 ze=-81.27<-17418 Statuses=0009 0009 05:15:44 Msec=0 True Az=110.055 Ze=-81.27 Az status=0009 Ze status=0009 05:15:45 Check angles 05:15:45 SkyScan query 05:15:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 05:15:45 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 05:15:45 Check angles 05:15:45 SkyScan query 05:15:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 05:15:46 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 05:15:46 Check angles 05:15:46 SkyScan query 05:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 05:15:47 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 05:15:47 Check angles 05:15:47 SkyScan query 05:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.05<-23070 Statuses=0008 0009 05:15:47 Msec=3000 True Az=112.995 Ze=-166.05 Az status=0008 Ze status=0009 05:15:48 Check angles 05:15:48 SkyScan query 05:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:15:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:15:48 Message to Master queued w/err=0: serial=105952 error=0 [UTC 2018-12-13 05:15:52] 05:15:53 Received message from Master: op=Filter serial=105953 05:15:53 Color wheel filter change from 0 to 0 05:15:53 FLIGetFilterPos err=0 currentPosition=0 05:15:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:53 Filter is already there-color wheel unchanged 05:15:54 Received message from Master: op=Shutter serial=105954 05:15:54 Shutter LASER open 05:15:54 Received message from Camera: op=State serial=105956 05:15:54 GetSingleValue result=40 Value=cccccccc 05:15:54 SkyScan query 05:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:15:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:55 Parameters OK 05:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:55 Set A/D data flow result=40 05:15:55 Set A/D channel type result=40 05:15:55 Set A/D encoding result=40 05:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:55 Set channel filter=0.000000e+000 result=40 05:15:55 Config A/D Result=40 05:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:55 Get A/D filter: -9.255963e+061 result=40 05:15:55 Get A/D value=-858993460 result=40 05:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:55 Parameters OK 05:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:55 Set A/D data flow result=40 05:15:55 Set A/D channel type result=40 05:15:55 Set A/D encoding result=40 05:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:55 Set channel filter=0.000000e+000 result=40 05:15:55 Config A/D Result=40 05:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:55 Get A/D filter: -9.255963e+061 result=40 05:15:55 Get A/D value=-858993460 result=40 05:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:55 Aux= 05:15:55 Message to Camera, serial 105956 queued 05:16:02 Received message from Master: op=Shutter serial=105965 05:16:02 Shutter LASER close 05:16:03 Received message from Master: op=PointingHead serial=105969 05:16:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:16:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:16:04 Point started: ret=0 05:16:04 point_skyscan result=0 05:16:05 Check angles 05:16:05 SkyScan query 05:16:05 SkyScan query done: ret=0 az=89.67<-5978 ze=157.005<-1533 Statuses=0009 0009 05:16:05 Msec=0 True Az=89.67 Ze=157.005 Az status=0009 Ze status=0009 05:16:05 Check angles 05:16:05 SkyScan query 05:16:06 SkyScan query done: ret=0 az=72.24<-4816 ze=136.05<-2930 Statuses=0009 0009 05:16:06 Msec=750 True Az=72.24 Ze=136.05 Az status=0009 Ze status=0009 05:16:06 Check angles 05:16:06 SkyScan query 05:16:07 SkyScan query done: ret=0 az=54.63<-3642 ze=114.645<-4357 Statuses=0009 0009 05:16:07 Msec=1500 True Az=54.63 Ze=114.645 Az status=0009 Ze status=0009 05:16:07 Check angles 05:16:07 SkyScan query 05:16:07 SkyScan query done: ret=0 az=40.92<-2728 ze=93.69<-5754 Statuses=0009 0009 05:16:07 Msec=2250 True Az=40.92 Ze=93.69 Az status=0009 Ze status=0009 05:16:08 Check angles 05:16:08 SkyScan query 05:16:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.75<-7150 Statuses=0008 0009 05:16:08 Msec=3000 True Az=40.995 Ze=72.75 Az status=0008 Ze status=0009 05:16:08 Check angles 05:16:08 SkyScan query 05:16:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 05:16:09 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 05:16:09 Check angles 05:16:09 SkyScan query 05:16:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:16:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:16:10 Message to Master queued w/err=0: serial=105969 error=0 05:16:15 Received message from Master: op=Filter serial=105970 05:16:15 Color wheel filter change from 0 to 0 05:16:15 FLIGetFilterPos err=0 currentPosition=0 05:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:15 Filter is already there-color wheel unchanged 05:16:15 Received message from Master: op=Shutter serial=105971 05:16:15 Shutter LASER close 05:16:15 Received message from Camera: op=State serial=105973 05:16:15 GetSingleValue result=40 Value=cccccccc 05:16:15 SkyScan query 05:16:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:16 Parameters OK 05:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:16 Set A/D data flow result=40 05:16:16 Set A/D channel type result=40 05:16:16 Set A/D encoding result=40 05:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:16 Set channel filter=0.000000e+000 result=40 05:16:16 Config A/D Result=40 05:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:16 Get A/D filter: -9.255963e+061 result=40 05:16:16 Get A/D value=-858993460 result=40 05:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:16 Parameters OK 05:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:16 Set A/D data flow result=40 05:16:16 Set A/D channel type result=40 05:16:16 Set A/D encoding result=40 05:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:16 Set channel filter=0.000000e+000 result=40 05:16:16 Config A/D Result=40 05:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:16 Get A/D filter: -9.255963e+061 result=40 05:16:16 Get A/D value=-858993460 result=40 05:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:16 Aux= 05:16:16 Message to Camera, serial 105973 queued 05:16:52 Received message from Master: op=PointingHead serial=105986 05:16:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:16:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:16:53 Point started: ret=0 05:16:53 point_skyscan result=0 05:16:54 Check angles 05:16:54 SkyScan query 05:16:54 SkyScan query done: ret=0 az=63.96<-4264 ze=66.54<-7564 Statuses=0009 0008 05:16:54 Msec=0 True Az=63.96 Ze=66.54 Az status=0009 Ze status=0008 05:16:54 Check angles 05:16:54 SkyScan query 05:16:55 SkyScan query done: ret=0 az=81.315<-5421 ze=66.495<-7567 Statuses=0009 0008 05:16:55 Msec=750 True Az=81.315 Ze=66.495 Az status=0009 Ze status=0008 05:16:55 Check angles 05:16:55 SkyScan query 05:16:56 SkyScan query done: ret=0 az=98.805<-6587 ze=66.495<-7567 Statuses=0009 0008 05:16:56 Msec=1500 True Az=98.805 Ze=66.495 Az status=0009 Ze status=0008 05:16:56 Check angles 05:16:56 SkyScan query 05:16:56 SkyScan query done: ret=0 az=116.745<-7783 ze=66.495<-7567 Statuses=0009 0008 05:16:56 Msec=2250 True Az=116.745 Ze=66.495 Az status=0009 Ze status=0008 05:16:57 Check angles 05:16:57 SkyScan query 05:16:57 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 05:16:57 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 05:16:57 Check angles 05:16:57 SkyScan query 05:16:58 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 05:16:58 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 05:16:58 Check angles 05:16:58 SkyScan query 05:16:59 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:16:59 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:16:59 Message to Master queued w/err=0: serial=105986 error=0 05:17:04 Received message from Master: op=Filter serial=105987 05:17:04 Color wheel filter change from 0 to 0 05:17:04 FLIGetFilterPos err=0 currentPosition=0 05:17:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:04 Filter is already there-color wheel unchanged 05:17:04 Received message from Master: op=Shutter serial=105988 05:17:04 Shutter LASER close 05:17:04 Received message from Camera: op=State serial=105990 05:17:04 GetSingleValue result=40 Value=cccccccc 05:17:04 SkyScan query 05:17:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:17:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:04 Parameters OK 05:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:04 Set A/D data flow result=40 05:17:04 Set A/D channel type result=40 05:17:04 Set A/D encoding result=40 05:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:04 Set channel filter=0.000000e+000 result=40 05:17:04 Config A/D Result=40 05:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:04 Get A/D filter: -9.255963e+061 result=40 05:17:04 Get A/D value=-858993460 result=40 05:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:04 Parameters OK 05:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:04 Set A/D data flow result=40 05:17:04 Set A/D channel type result=40 05:17:04 Set A/D encoding result=40 05:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:04 Set channel filter=0.000000e+000 result=40 05:17:04 Config A/D Result=40 05:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:04 Get A/D filter: -9.255963e+061 result=40 05:17:04 Get A/D value=-858993460 result=40 05:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:04 Aux= 05:17:04 Message to Camera, serial 105990 queued 05:17:41 Received message from Master: op=PointingHead serial=106003 05:17:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:17:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:17:42 Point started: ret=0 05:17:42 point_skyscan result=0 05:17:42 Check angles 05:17:42 SkyScan query 05:17:43 SkyScan query done: ret=0 az=134.97<-8998 ze=36.705<-9553 Statuses=0009 0009 05:17:43 Msec=0 True Az=134.97 Ze=36.705 Az status=0009 Ze status=0009 05:17:43 Check angles 05:17:43 SkyScan query 05:17:44 SkyScan query done: ret=0 az=117.555<-7837 ze=15.81<-10946 Statuses=0009 0009 05:17:44 Msec=750 True Az=117.555 Ze=15.81 Az status=0009 Ze status=0009 05:17:44 Check angles 05:17:44 SkyScan query 05:17:44 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.58<-12372 Statuses=0009 0009 05:17:44 Msec=1500 True Az=99.78 Ze=-5.58 Az status=0009 Ze status=0009 05:17:45 Check angles 05:17:45 SkyScan query 05:17:45 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.535<-13769 Statuses=0009 0009 05:17:45 Msec=2250 True Az=82.335 Ze=-26.535 Az status=0009 Ze status=0009 05:17:45 Check angles 05:17:45 SkyScan query 05:17:46 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.565<-14571 Statuses=0009 0008 05:17:46 Msec=3000 True Az=64.785 Ze=-38.565 Az status=0009 Ze status=0008 05:17:46 Check angles 05:17:46 SkyScan query 05:17:47 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.535<-14569 Statuses=0009 0008 05:17:47 Msec=3750 True Az=47.34 Ze=-38.535 Az status=0009 Ze status=0008 05:17:47 Check angles 05:17:47 SkyScan query 05:17:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:17:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:17:47 Message to Master queued w/err=0: serial=106003 error=0 05:17:52 Received message from Master: op=Filter serial=106004 05:17:52 Color wheel filter change from 0 to 0 05:17:52 FLIGetFilterPos err=0 currentPosition=0 05:17:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:52 Filter is already there-color wheel unchanged 05:17:53 Received message from Master: op=Shutter serial=106005 05:17:53 Shutter LASER close 05:17:53 Received message from Camera: op=State serial=106007 05:17:53 GetSingleValue result=40 Value=cccccccc 05:17:53 SkyScan query 05:17:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:17:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:53 Parameters OK 05:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:53 Set A/D data flow result=40 05:17:53 Set A/D channel type result=40 05:17:53 Set A/D encoding result=40 05:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:53 Set channel filter=0.000000e+000 result=40 05:17:53 Config A/D Result=40 05:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:53 Get A/D filter: -9.255963e+061 result=40 05:17:53 Get A/D value=-858993460 result=40 05:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:53 Parameters OK 05:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:53 Set A/D data flow result=40 05:17:53 Set A/D channel type result=40 05:17:53 Set A/D encoding result=40 05:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:53 Set channel filter=0.000000e+000 result=40 05:17:53 Config A/D Result=40 05:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:53 Get A/D filter: -9.255963e+061 result=40 05:17:53 Get A/D value=-858993460 result=40 05:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:53 Aux= 05:17:53 Message to Camera, serial 106007 queued 05:18:30 Received message from Master: op=PointingHead serial=106020 05:18:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:18:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:18:30 Point started: ret=0 05:18:30 point_skyscan result=0 05:18:31 Check angles 05:18:31 SkyScan query 05:18:32 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.415<-16561 Statuses=0009 0009 05:18:32 Msec=0 True Az=64.215 Ze=-68.415 Az status=0009 Ze status=0009 05:18:32 Check angles 05:18:32 SkyScan query 05:18:33 SkyScan query done: ret=0 az=82.005<-5467 ze=-89.835<-17989 Statuses=0009 0009 05:18:33 Msec=750 True Az=82.005 Ze=-89.835 Az status=0009 Ze status=0009 05:18:33 Check angles 05:18:33 SkyScan query 05:18:33 SkyScan query done: ret=0 az=99.825<-6655 ze=-111.225<-19415 Statuses=0009 0009 05:18:33 Msec=1500 True Az=99.825 Ze=-111.225 Az status=0009 Ze status=0009 05:18:33 Check angles 05:18:33 SkyScan query 05:18:34 SkyScan query done: ret=0 az=117.36<-7824 ze=-132.135<-20809 Statuses=0009 0009 05:18:34 Msec=2250 True Az=117.36 Ze=-132.135 Az status=0009 Ze status=0009 05:18:34 Check angles 05:18:34 SkyScan query 05:18:35 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 05:18:35 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 05:18:35 Check angles 05:18:35 SkyScan query 05:18:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 05:18:36 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 05:18:36 Message to Master queued w/err=0: serial=106020 error=0 05:18:41 Received message from Master: op=Filter serial=106021 05:18:41 Color wheel filter change from 0 to 0 05:18:41 FLIGetFilterPos err=0 currentPosition=0 05:18:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:41 Filter is already there-color wheel unchanged 05:18:41 Received message from Master: op=Shutter serial=106022 05:18:41 Shutter LASER close 05:18:41 Received message from Camera: op=State serial=106024 05:18:41 GetSingleValue result=40 Value=cccccccc 05:18:41 SkyScan query 05:18:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:18:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:41 Parameters OK 05:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:41 Set A/D data flow result=40 05:18:41 Set A/D channel type result=40 05:18:41 Set A/D encoding result=40 05:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:41 Set channel filter=0.000000e+000 result=40 05:18:41 Config A/D Result=40 05:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:41 Get A/D filter: -9.255963e+061 result=40 05:18:41 Get A/D value=-858993460 result=40 05:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:41 Parameters OK 05:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:41 Set A/D data flow result=40 05:18:41 Set A/D channel type result=40 05:18:41 Set A/D encoding result=40 05:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:41 Set channel filter=0.000000e+000 result=40 05:18:41 Config A/D Result=40 05:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:41 Get A/D filter: -9.255963e+061 result=40 05:18:41 Get A/D value=-858993460 result=40 05:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:41 Aux= 05:18:41 Message to Camera, serial 106024 queued 05:19:18 Received message from Master: op=PointingHead serial=106037 05:19:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:19:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:19:19 Point started: ret=0 05:19:19 point_skyscan result=0 05:19:19 Check angles 05:19:19 SkyScan query 05:19:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 05:19:20 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 05:19:20 Check angles 05:19:20 SkyScan query 05:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:19:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:19:21 Message to Master queued w/err=0: serial=106037 error=0 05:19:26 Received message from Master: op=Filter serial=106038 05:19:26 Color wheel filter change from 0 to 0 05:19:26 FLIGetFilterPos err=0 currentPosition=0 05:19:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:26 Filter is already there-color wheel unchanged 05:19:26 Received message from Master: op=Shutter serial=106039 05:19:26 Shutter LASER open 05:19:26 Received message from Camera: op=State serial=106041 05:19:26 GetSingleValue result=40 Value=cccccccc 05:19:26 SkyScan query 05:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:19:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:27 Parameters OK 05:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:27 Set A/D data flow result=40 05:19:27 Set A/D channel type result=40 05:19:27 Set A/D encoding result=40 05:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:27 Set channel filter=0.000000e+000 result=40 05:19:27 Config A/D Result=40 05:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:27 Get A/D filter: -9.255963e+061 result=40 05:19:27 Get A/D value=-858993460 result=40 05:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:27 Parameters OK 05:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:27 Set A/D data flow result=40 05:19:27 Set A/D channel type result=40 05:19:27 Set A/D encoding result=40 05:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:27 Set channel filter=0.000000e+000 result=40 05:19:27 Config A/D Result=40 05:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:27 Get A/D filter: -9.255963e+061 result=40 05:19:27 Get A/D value=-858993460 result=40 05:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:27 Aux= 05:19:27 Message to Camera, serial 106041 queued 05:19:35 Received message from Master: op=Shutter serial=106051 05:19:35 Shutter LASER close 05:19:36 Received message from Master: op=PointingHead serial=106055 05:19:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:19:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:19:36 Point started: ret=0 05:19:36 point_skyscan result=0 05:19:37 Check angles 05:19:37 SkyScan query 05:19:37 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.265<-21551 Statuses=0009 0009 05:19:37 Msec=0 True Az=135.945 Ze=-143.265 Az status=0009 Ze status=0009 05:19:38 Check angles 05:19:38 SkyScan query 05:19:38 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.295<-20153 Statuses=0009 0009 05:19:38 Msec=750 True Az=153.42 Ze=-122.295 Az status=0009 Ze status=0009 05:19:38 Check angles 05:19:38 SkyScan query 05:19:39 SkyScan query done: ret=0 az=171.285<-11419 ze=-100.92<-18728 Statuses=0009 0009 05:19:39 Msec=1500 True Az=171.285 Ze=-100.92 Az status=0009 Ze status=0009 05:19:39 Check angles 05:19:39 SkyScan query 05:19:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 05:19:40 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 05:19:40 Check angles 05:19:40 SkyScan query 05:19:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.01<-15934 Statuses=0008 0009 05:19:40 Msec=3000 True Az=176.01 Ze=-59.01 Az status=0008 Ze status=0009 05:19:41 Check angles 05:19:41 SkyScan query 05:19:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:19:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:19:41 Message to Master queued w/err=0: serial=106055 error=0 05:19:46 Received message from Master: op=Filter serial=106056 05:19:46 Color wheel filter change from 0 to 0 05:19:46 FLIGetFilterPos err=0 currentPosition=0 05:19:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:46 Filter is already there-color wheel unchanged 05:19:46 Received message from Master: op=Shutter serial=106057 05:19:46 Shutter LASER close 05:19:46 Received message from Camera: op=State serial=106059 05:19:46 GetSingleValue result=40 Value=cccccccc 05:19:46 SkyScan query 05:19:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:19:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:47 Parameters OK 05:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:47 Set A/D data flow result=40 05:19:47 Set A/D channel type result=40 05:19:47 Set A/D encoding result=40 05:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:47 Set channel filter=0.000000e+000 result=40 05:19:47 Config A/D Result=40 05:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:47 Get A/D filter: -9.255963e+061 result=40 05:19:47 Get A/D value=-858993460 result=40 05:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:47 Parameters OK 05:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:47 Set A/D data flow result=40 05:19:47 Set A/D channel type result=40 05:19:47 Set A/D encoding result=40 05:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:47 Set channel filter=0.000000e+000 result=40 05:19:47 Config A/D Result=40 05:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:47 Get A/D filter: -9.255963e+061 result=40 05:19:47 Get A/D value=-858993460 result=40 05:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:47 Aux= 05:19:47 Message to Camera, serial 106059 queued 05:20:24 Received message from Master: op=PointingHead serial=106072 05:20:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:20:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:20:24 Point started: ret=0 05:20:24 point_skyscan result=0 05:20:25 Check angles 05:20:25 SkyScan query 05:20:26 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.63<-13442 Statuses=0009 0009 05:20:26 Msec=0 True Az=152.925 Ze=-21.63 Az status=0009 Ze status=0009 05:20:26 Check angles 05:20:26 SkyScan query 05:20:26 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.63<-12042 Statuses=0009 0009 05:20:26 Msec=750 True Az=135.42 Ze=-0.63 Az status=0009 Ze status=0009 05:20:26 Check angles 05:20:26 SkyScan query 05:20:27 SkyScan query done: ret=0 az=117.78<-7852 ze=20.295<-10647 Statuses=0009 0009 05:20:27 Msec=1500 True Az=117.78 Ze=20.295 Az status=0009 Ze status=0009 05:20:27 Check angles 05:20:27 SkyScan query 05:20:28 SkyScan query done: ret=0 az=100.41<-6694 ze=41.295<-9247 Statuses=0009 0009 05:20:28 Msec=2250 True Az=100.41 Ze=41.295 Az status=0009 Ze status=0009 05:20:28 Check angles 05:20:28 SkyScan query 05:20:29 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 05:20:29 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 05:20:29 Check angles 05:20:29 SkyScan query 05:20:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:20:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:20:29 Message to Master queued w/err=0: serial=106072 error=0 05:20:34 Received message from Master: op=Filter serial=106073 05:20:34 Color wheel filter change from 0 to 0 05:20:34 FLIGetFilterPos err=0 currentPosition=0 05:20:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:34 Filter is already there-color wheel unchanged 05:20:34 Received message from Master: op=Shutter serial=106074 05:20:34 Shutter LASER close 05:20:34 Received message from Camera: op=State serial=106076 05:20:34 GetSingleValue result=40 Value=cccccccc 05:20:34 SkyScan query 05:20:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:20:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:35 Parameters OK 05:20:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:35 Set A/D data flow result=40 05:20:35 Set A/D channel type result=40 05:20:35 Set A/D encoding result=40 05:20:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:35 Set channel filter=0.000000e+000 result=40 05:20:35 Config A/D Result=40 05:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:35 Get A/D filter: -9.255963e+061 result=40 05:20:35 Get A/D value=-858993460 result=40 05:20:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:35 Parameters OK 05:20:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:35 Set A/D data flow result=40 05:20:35 Set A/D channel type result=40 05:20:35 Set A/D encoding result=40 05:20:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:35 Set channel filter=0.000000e+000 result=40 05:20:35 Config A/D Result=40 05:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:35 Get A/D filter: -9.255963e+061 result=40 05:20:35 Get A/D value=-858993460 result=40 05:20:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:35 Aux= 05:20:35 Message to Camera, serial 106076 queued 05:21:12 Received message from Master: op=PointingHead serial=106089 05:21:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:21:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:21:12 Point started: ret=0 05:21:12 point_skyscan result=0 05:21:13 Check angles 05:21:13 SkyScan query 05:21:14 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 05:21:14 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 05:21:14 Check angles 05:21:14 SkyScan query 05:21:14 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 05:21:14 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 05:21:15 Check angles 05:21:15 SkyScan query 05:21:15 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 05:21:15 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 05:21:15 Check angles 05:21:15 SkyScan query 05:21:16 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 05:21:16 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 05:21:16 Check angles 05:21:16 SkyScan query 05:21:17 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:21:17 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:21:17 Check angles 05:21:17 SkyScan query 05:21:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:21:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:21:17 Message to Master queued w/err=0: serial=106089 error=0 05:21:22 Received message from Master: op=Filter serial=106090 05:21:22 Color wheel filter change from 0 to 0 05:21:22 FLIGetFilterPos err=0 currentPosition=0 05:21:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:22 Filter is already there-color wheel unchanged 05:21:23 Received message from Master: op=Shutter serial=106091 05:21:23 Shutter LASER close 05:21:23 Received message from Camera: op=State serial=106093 05:21:23 GetSingleValue result=40 Value=cccccccc 05:21:23 SkyScan query 05:21:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:21:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:23 Parameters OK 05:21:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:23 Set A/D data flow result=40 05:21:23 Set A/D channel type result=40 05:21:23 Set A/D encoding result=40 05:21:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:23 Set channel filter=0.000000e+000 result=40 05:21:23 Config A/D Result=40 05:21:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:23 Get A/D filter: -9.255963e+061 result=40 05:21:23 Get A/D value=-858993460 result=40 05:21:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:23 Parameters OK 05:21:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:23 Set A/D data flow result=40 05:21:23 Set A/D channel type result=40 05:21:23 Set A/D encoding result=40 05:21:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:23 Set channel filter=0.000000e+000 result=40 05:21:23 Config A/D Result=40 05:21:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:23 Get A/D filter: -9.255963e+061 result=40 05:21:23 Get A/D value=-858993460 result=40 05:21:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:23 Aux= 05:21:23 Message to Camera, serial 106093 queued 05:22:00 Received message from Master: op=PointingHead serial=106106 05:22:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:22:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:22:00 Point started: ret=0 05:22:00 point_skyscan result=0 05:22:01 Check angles 05:22:01 SkyScan query 05:22:02 SkyScan query done: ret=0 az=153.195<-10213 ze=8.88<-11408 Statuses=0009 0009 05:22:02 Msec=0 True Az=153.195 Ze=8.88 Az status=0009 Ze status=0009 05:22:02 Check angles 05:22:02 SkyScan query 05:22:02 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.465<-12831 Statuses=0009 0009 05:22:02 Msec=750 True Az=135.36 Ze=-12.465 Az status=0009 Ze status=0009 05:22:03 Check angles 05:22:03 SkyScan query 05:22:03 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.42<-14228 Statuses=0009 0009 05:22:03 Msec=1500 True Az=117.81 Ze=-33.42 Az status=0009 Ze status=0009 05:22:03 Check angles 05:22:03 SkyScan query 05:22:04 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.54<-15436 Statuses=0009 0009 05:22:04 Msec=2250 True Az=100.395 Ze=-51.54 Az status=0009 Ze status=0009 05:22:04 Check angles 05:22:04 SkyScan query 05:22:05 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:22:05 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:22:05 Check angles 05:22:05 SkyScan query 05:22:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:22:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:22:05 Message to Master queued w/err=0: serial=106106 error=0 05:22:10 Received message from Master: op=Filter serial=106107 05:22:10 Color wheel filter change from 0 to 0 05:22:10 FLIGetFilterPos err=0 currentPosition=0 05:22:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:10 Filter is already there-color wheel unchanged 05:22:11 Received message from Master: op=Shutter serial=106108 05:22:11 Shutter LASER close 05:22:11 Received message from Camera: op=State serial=106110 05:22:11 GetSingleValue result=40 Value=cccccccc 05:22:11 SkyScan query 05:22:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:22:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:11 Parameters OK 05:22:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:11 Set A/D data flow result=40 05:22:11 Set A/D channel type result=40 05:22:11 Set A/D encoding result=40 05:22:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:11 Set channel filter=0.000000e+000 result=40 05:22:11 Config A/D Result=40 05:22:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:11 Get A/D filter: -9.255963e+061 result=40 05:22:11 Get A/D value=-858993460 result=40 05:22:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:11 Parameters OK 05:22:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:11 Set A/D data flow result=40 05:22:11 Set A/D channel type result=40 05:22:11 Set A/D encoding result=40 05:22:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:11 Set channel filter=0.000000e+000 result=40 05:22:11 Config A/D Result=40 05:22:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:11 Get A/D filter: -9.255963e+061 result=40 05:22:11 Get A/D value=-858993460 result=40 05:22:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:11 Aux= 05:22:11 Message to Camera, serial 106110 queued 05:22:48 Received message from Master: op=PointingHead serial=106123 05:22:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:22:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:22:48 Point started: ret=0 05:22:48 point_skyscan result=0 05:22:49 Check angles 05:22:49 SkyScan query 05:22:50 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.465<-17431 Statuses=0009 0009 05:22:50 Msec=0 True Az=109.035 Ze=-81.465 Az status=0009 Ze status=0009 05:22:50 Check angles 05:22:50 SkyScan query 05:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 05:22:50 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 05:22:51 Check angles 05:22:51 SkyScan query 05:22:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 05:22:51 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 05:22:51 Check angles 05:22:51 SkyScan query 05:22:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 05:22:52 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 05:22:52 Check angles 05:22:52 SkyScan query 05:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.63<-23042 Statuses=0008 0009 05:22:53 Msec=3000 True Az=112.995 Ze=-165.63 Az status=0008 Ze status=0009 05:22:53 Check angles 05:22:53 SkyScan query 05:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:22:53 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:22:53 Message to Master queued w/err=0: serial=106123 error=0 05:22:58 Received message from Master: op=Filter serial=106124 05:22:58 Color wheel filter change from 0 to 0 05:22:58 FLIGetFilterPos err=0 currentPosition=0 05:22:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:58 Filter is already there-color wheel unchanged 05:22:59 Received message from Master: op=Shutter serial=106125 05:22:59 Shutter LASER open 05:22:59 Received message from Camera: op=State serial=106127 05:22:59 GetSingleValue result=40 Value=cccccccc 05:22:59 SkyScan query 05:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:22:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:59 Parameters OK 05:22:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:59 Set A/D data flow result=40 05:22:59 Set A/D channel type result=40 05:22:59 Set A/D encoding result=40 05:22:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:59 Set channel filter=0.000000e+000 result=40 05:22:59 Config A/D Result=40 05:22:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:59 Get A/D filter: -9.255963e+061 result=40 05:22:59 Get A/D value=-858993460 result=40 05:22:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:59 Parameters OK 05:22:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:59 Set A/D data flow result=40 05:22:59 Set A/D channel type result=40 05:22:59 Set A/D encoding result=40 05:22:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:59 Set channel filter=0.000000e+000 result=40 05:22:59 Config A/D Result=40 05:22:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:59 Get A/D filter: -9.255963e+061 result=40 05:22:59 Get A/D value=-858993460 result=40 05:22:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:59 Aux= 05:22:59 Message to Camera, serial 106127 queued 05:23:08 Received message from Master: op=Shutter serial=106137 05:23:08 Shutter LASER close 05:23:08 Received message from Master: op=PointingHead serial=106141 05:23:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:23:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:23:09 Point started: ret=0 05:23:09 point_skyscan result=0 05:23:09 Check angles 05:23:09 SkyScan query 05:23:10 SkyScan query done: ret=0 az=89.865<-5991 ze=157.26<-1516 Statuses=0009 0009 05:23:10 Msec=0 True Az=89.865 Ze=157.26 Az status=0009 Ze status=0009 05:23:10 Check angles 05:23:10 SkyScan query 05:23:11 SkyScan query done: ret=0 az=72.315<-4821 ze=136.29<-2914 Statuses=0009 0009 05:23:11 Msec=750 True Az=72.315 Ze=136.29 Az status=0009 Ze status=0009 05:23:11 Check angles 05:23:11 SkyScan query 05:23:11 SkyScan query done: ret=0 az=54.975<-3665 ze=115.365<-4309 Statuses=0009 0009 05:23:11 Msec=1500 True Az=54.975 Ze=115.365 Az status=0009 Ze status=0009 05:23:12 Check angles 05:23:12 SkyScan query 05:23:12 SkyScan query done: ret=0 az=40.86<-2724 ze=94.365<-5709 Statuses=0009 0009 05:23:12 Msec=2250 True Az=40.86 Ze=94.365 Az status=0009 Ze status=0009 05:23:12 Check angles 05:23:12 SkyScan query 05:23:13 SkyScan query done: ret=0 az=40.995<-2733 ze=73.44<-7104 Statuses=0008 0009 05:23:13 Msec=3000 True Az=40.995 Ze=73.44 Az status=0008 Ze status=0009 05:23:13 Check angles 05:23:13 SkyScan query 05:23:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.86<-8476 Statuses=0008 0009 05:23:14 Msec=3750 True Az=40.995 Ze=52.86 Az status=0008 Ze status=0009 05:23:14 Check angles 05:23:14 SkyScan query 05:23:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:23:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:23:14 Message to Master queued w/err=0: serial=106141 error=0 05:23:19 Received message from Master: op=Filter serial=106142 05:23:19 Color wheel filter change from 0 to 0 05:23:19 FLIGetFilterPos err=0 currentPosition=0 05:23:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:19 Filter is already there-color wheel unchanged 05:23:20 Received message from Master: op=Shutter serial=106143 05:23:20 Shutter LASER close 05:23:20 Received message from Camera: op=State serial=106145 05:23:20 GetSingleValue result=40 Value=cccccccc 05:23:20 SkyScan query 05:23:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:23:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:20 Parameters OK 05:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:20 Set A/D data flow result=40 05:23:20 Set A/D channel type result=40 05:23:20 Set A/D encoding result=40 05:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:20 Set channel filter=0.000000e+000 result=40 05:23:20 Config A/D Result=40 05:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:20 Get A/D filter: -9.255963e+061 result=40 05:23:20 Get A/D value=-858993460 result=40 05:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:20 Parameters OK 05:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:20 Set A/D data flow result=40 05:23:20 Set A/D channel type result=40 05:23:20 Set A/D encoding result=40 05:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:20 Set channel filter=0.000000e+000 result=40 05:23:20 Config A/D Result=40 05:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:20 Get A/D filter: -9.255963e+061 result=40 05:23:20 Get A/D value=-858993460 result=40 05:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:20 Aux= 05:23:20 Message to Camera, serial 106145 queued 05:23:57 Received message from Master: op=PointingHead serial=106158 05:23:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:23:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:23:57 Point started: ret=0 05:23:57 point_skyscan result=0 05:23:58 Check angles 05:23:58 SkyScan query 05:23:59 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 05:23:59 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 05:23:59 Check angles 05:23:59 SkyScan query 05:24:00 SkyScan query done: ret=0 az=81.78<-5452 ze=66.495<-7567 Statuses=0009 0008 05:24:00 Msec=750 True Az=81.78 Ze=66.495 Az status=0009 Ze status=0008 05:24:00 Check angles 05:24:00 SkyScan query 05:24:00 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 05:24:00 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 05:24:01 Check angles 05:24:01 SkyScan query 05:24:01 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 05:24:01 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 05:24:01 Check angles 05:24:01 SkyScan query 05:24:02 SkyScan query done: ret=0 az=134.37<-8958 ze=66.495<-7567 Statuses=0009 0008 05:24:02 Msec=3000 True Az=134.37 Ze=66.495 Az status=0009 Ze status=0008 05:24:02 Check angles 05:24:02 SkyScan query 05:24:03 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 05:24:03 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 05:24:03 Check angles 05:24:03 SkyScan query 05:24:03 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:24:03 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:24:03 Message to Master queued w/err=0: serial=106158 error=0 05:24:08 Received message from Master: op=Filter serial=106159 05:24:08 Color wheel filter change from 0 to 0 05:24:08 FLIGetFilterPos err=0 currentPosition=0 05:24:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:08 Filter is already there-color wheel unchanged 05:24:09 Received message from Master: op=Shutter serial=106160 05:24:09 Shutter LASER close 05:24:09 Received message from Camera: op=State serial=106162 05:24:09 GetSingleValue result=40 Value=cccccccc 05:24:09 SkyScan query 05:24:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:24:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:09 Parameters OK 05:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:09 Set A/D data flow result=40 05:24:09 Set A/D channel type result=40 05:24:09 Set A/D encoding result=40 05:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:09 Set channel filter=0.000000e+000 result=40 05:24:09 Config A/D Result=40 05:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:09 Get A/D filter: -9.255963e+061 result=40 05:24:09 Get A/D value=-858993460 result=40 05:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:09 Parameters OK 05:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:09 Set A/D data flow result=40 05:24:09 Set A/D channel type result=40 05:24:09 Set A/D encoding result=40 05:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:09 Set channel filter=0.000000e+000 result=40 05:24:09 Config A/D Result=40 05:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:09 Get A/D filter: -9.255963e+061 result=40 05:24:09 Get A/D value=-858993460 result=40 05:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:09 Aux= 05:24:09 Message to Camera, serial 106162 queued 05:24:46 Received message from Master: op=PointingHead serial=106175 05:24:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:24:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:24:46 Point started: ret=0 05:24:46 point_skyscan result=0 05:24:47 Check angles 05:24:47 SkyScan query 05:24:48 SkyScan query done: ret=0 az=134.655<-8977 ze=36.345<-9577 Statuses=0009 0009 05:24:48 Msec=0 True Az=134.655 Ze=36.345 Az status=0009 Ze status=0009 05:24:48 Check angles 05:24:48 SkyScan query 05:24:48 SkyScan query done: ret=0 az=117.21<-7814 ze=15.45<-10970 Statuses=0009 0009 05:24:48 Msec=750 True Az=117.21 Ze=15.45 Az status=0009 Ze status=0009 05:24:49 Check angles 05:24:49 SkyScan query 05:24:49 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.55<-12370 Statuses=0009 0009 05:24:49 Msec=1500 True Az=99.825 Ze=-5.55 Az status=0009 Ze status=0009 05:24:49 Check angles 05:24:49 SkyScan query 05:24:50 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.505<-13767 Statuses=0009 0009 05:24:50 Msec=2250 True Az=82.305 Ze=-26.505 Az status=0009 Ze status=0009 05:24:50 Check angles 05:24:50 SkyScan query 05:24:51 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.565<-14571 Statuses=0009 0008 05:24:51 Msec=3000 True Az=64.755 Ze=-38.565 Az status=0009 Ze status=0008 05:24:51 Check angles 05:24:51 SkyScan query 05:24:51 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.535<-14569 Statuses=0009 0008 05:24:51 Msec=3750 True Az=47.295 Ze=-38.535 Az status=0009 Ze status=0008 05:24:52 Check angles 05:24:52 SkyScan query 05:24:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:24:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:24:52 Message to Master queued w/err=0: serial=106175 error=0 05:24:57 Received message from Master: op=Filter serial=106176 05:24:57 Color wheel filter change from 0 to 0 05:24:57 FLIGetFilterPos err=0 currentPosition=0 05:24:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:57 Filter is already there-color wheel unchanged 05:24:57 Received message from Master: op=Shutter serial=106177 05:24:57 Shutter LASER close 05:24:57 Received message from Camera: op=State serial=106179 05:24:57 GetSingleValue result=40 Value=cccccccc 05:24:57 SkyScan query 05:24:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:24:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:58 Parameters OK 05:24:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:58 Set A/D data flow result=40 05:24:58 Set A/D channel type result=40 05:24:58 Set A/D encoding result=40 05:24:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:58 Set channel filter=0.000000e+000 result=40 05:24:58 Config A/D Result=40 05:24:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:58 Get A/D filter: -9.255963e+061 result=40 05:24:58 Get A/D value=-858993460 result=40 05:24:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:58 Parameters OK 05:24:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:58 Set A/D data flow result=40 05:24:58 Set A/D channel type result=40 05:24:58 Set A/D encoding result=40 05:24:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:58 Set channel filter=0.000000e+000 result=40 05:24:58 Config A/D Result=40 05:24:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:58 Get A/D filter: -9.255963e+061 result=40 05:24:58 Get A/D value=-858993460 result=40 05:24:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:58 Aux= 05:24:58 Message to Camera, serial 106179 queued 05:25:35 Received message from Master: op=PointingHead serial=106192 05:25:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:25:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:25:35 Point started: ret=0 05:25:35 point_skyscan result=0 05:25:36 Check angles 05:25:36 SkyScan query 05:25:37 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.25<-16550 Statuses=0009 0009 05:25:37 Msec=0 True Az=64.005 Ze=-68.25 Az status=0009 Ze status=0009 05:25:37 Check angles 05:25:37 SkyScan query 05:25:37 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.25<-17950 Statuses=0009 0009 05:25:37 Msec=750 True Az=81.33 Ze=-89.25 Az status=0009 Ze status=0009 05:25:37 Check angles 05:25:37 SkyScan query 05:25:38 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.175<-19345 Statuses=0009 0009 05:25:38 Msec=1500 True Az=98.895 Ze=-110.175 Az status=0009 Ze status=0009 05:25:38 Check angles 05:25:38 SkyScan query 05:25:39 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.13<-20742 Statuses=0009 0009 05:25:39 Msec=2250 True Az=116.595 Ze=-131.13 Az status=0009 Ze status=0009 [UTC 2018-12-13 05:25:39] 05:25:39 Check angles 05:25:39 SkyScan query 05:25:40 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 05:25:40 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 05:25:40 Check angles 05:25:40 SkyScan query 05:25:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:25:40 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:25:40 Message to Master queued w/err=0: serial=106192 error=0 05:25:45 Received message from Master: op=Filter serial=106193 05:25:45 Color wheel filter change from 0 to 0 05:25:45 FLIGetFilterPos err=0 currentPosition=0 05:25:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:45 Filter is already there-color wheel unchanged 05:25:45 Received message from Master: op=Shutter serial=106194 05:25:45 Shutter LASER close 05:25:45 Received message from Camera: op=State serial=106196 05:25:45 GetSingleValue result=40 Value=cccccccc 05:25:45 SkyScan query 05:25:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:25:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:46 Parameters OK 05:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:46 Set A/D data flow result=40 05:25:46 Set A/D channel type result=40 05:25:46 Set A/D encoding result=40 05:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:46 Set channel filter=0.000000e+000 result=40 05:25:46 Config A/D Result=40 05:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:46 Get A/D filter: -9.255963e+061 result=40 05:25:46 Get A/D value=-858993460 result=40 05:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:46 Parameters OK 05:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:46 Set A/D data flow result=40 05:25:46 Set A/D channel type result=40 05:25:46 Set A/D encoding result=40 05:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:46 Set channel filter=0.000000e+000 result=40 05:25:46 Config A/D Result=40 05:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:46 Get A/D filter: -9.255963e+061 result=40 05:25:46 Get A/D value=-858993460 result=40 05:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:46 Aux= 05:25:46 Message to Camera, serial 106196 queued 05:26:23 Received message from Master: op=PointingHead serial=106209 05:26:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:26:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:26:23 Point started: ret=0 05:26:23 point_skyscan result=0 05:26:24 Check angles 05:26:24 SkyScan query 05:26:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 05:26:25 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 05:26:25 Check angles 05:26:25 SkyScan query 05:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:26:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:26:25 Message to Master queued w/err=0: serial=106209 error=0 05:26:30 Received message from Master: op=Filter serial=106210 05:26:30 Color wheel filter change from 0 to 0 05:26:30 FLIGetFilterPos err=0 currentPosition=0 05:26:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:30 Filter is already there-color wheel unchanged 05:26:31 Received message from Master: op=Shutter serial=106211 05:26:31 Shutter LASER open 05:26:31 Received message from Camera: op=State serial=106213 05:26:31 GetSingleValue result=40 Value=cccccccc 05:26:31 SkyScan query 05:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:26:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:31 Parameters OK 05:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:31 Set A/D data flow result=40 05:26:31 Set A/D channel type result=40 05:26:31 Set A/D encoding result=40 05:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:31 Set channel filter=0.000000e+000 result=40 05:26:31 Config A/D Result=40 05:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:31 Get A/D filter: -9.255963e+061 result=40 05:26:31 Get A/D value=-858993460 result=40 05:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:31 Parameters OK 05:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:31 Set A/D data flow result=40 05:26:31 Set A/D channel type result=40 05:26:31 Set A/D encoding result=40 05:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:31 Set channel filter=0.000000e+000 result=40 05:26:31 Config A/D Result=40 05:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:31 Get A/D filter: -9.255963e+061 result=40 05:26:31 Get A/D value=-858993460 result=40 05:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:31 Aux= 05:26:31 Message to Camera, serial 106213 queued 05:26:40 Received message from Master: op=Shutter serial=106223 05:26:40 Shutter LASER close 05:26:40 Received message from Master: op=PointingHead serial=106227 05:26:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:26:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:26:41 Point started: ret=0 05:26:41 point_skyscan result=0 05:26:41 Check angles 05:26:41 SkyScan query 05:26:42 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.95<-21530 Statuses=0009 0009 05:26:42 Msec=0 True Az=136.395 Ze=-142.95 Az status=0009 Ze status=0009 05:26:42 Check angles 05:26:42 SkyScan query 05:26:43 SkyScan query done: ret=0 az=154.245<-10283 ze=-121.59<-20106 Statuses=0009 0009 05:26:43 Msec=750 True Az=154.245 Ze=-121.59 Az status=0009 Ze status=0009 05:26:43 Check angles 05:26:43 SkyScan query 05:26:44 SkyScan query done: ret=0 az=171.735<-11449 ze=-100.56<-18704 Statuses=0009 0009 05:26:44 Msec=1500 True Az=171.735 Ze=-100.56 Az status=0009 Ze status=0009 05:26:44 Check angles 05:26:44 SkyScan query 05:26:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.65<-17310 Statuses=0008 0009 05:26:44 Msec=2250 True Az=176.01 Ze=-79.65 Az status=0008 Ze status=0009 05:26:44 Check angles 05:26:44 SkyScan query 05:26:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.215<-15881 Statuses=0008 0009 05:26:45 Msec=3000 True Az=176.01 Ze=-58.215 Az status=0008 Ze status=0009 05:26:45 Check angles 05:26:45 SkyScan query 05:26:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:26:46 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:26:46 Message to Master queued w/err=0: serial=106227 error=0 05:26:51 Received message from Master: op=Filter serial=106228 05:26:51 Color wheel filter change from 0 to 0 05:26:51 FLIGetFilterPos err=0 currentPosition=0 05:26:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:51 Filter is already there-color wheel unchanged 05:26:51 Received message from Master: op=Shutter serial=106229 05:26:51 Shutter LASER close 05:26:51 Received message from Camera: op=State serial=106231 05:26:51 GetSingleValue result=40 Value=cccccccc 05:26:51 SkyScan query 05:26:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:26:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:52 Parameters OK 05:26:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:52 Set A/D data flow result=40 05:26:52 Set A/D channel type result=40 05:26:52 Set A/D encoding result=40 05:26:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:52 Set channel filter=0.000000e+000 result=40 05:26:52 Config A/D Result=40 05:26:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:52 Get A/D filter: -9.255963e+061 result=40 05:26:52 Get A/D value=-858993460 result=40 05:26:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:52 Parameters OK 05:26:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:52 Set A/D data flow result=40 05:26:52 Set A/D channel type result=40 05:26:52 Set A/D encoding result=40 05:26:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:52 Set channel filter=0.000000e+000 result=40 05:26:52 Config A/D Result=40 05:26:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:52 Get A/D filter: -9.255963e+061 result=40 05:26:52 Get A/D value=-858993460 result=40 05:26:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:52 Aux= 05:26:52 Message to Camera, serial 106231 queued 05:27:29 Received message from Master: op=PointingHead serial=106244 05:27:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:27:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:27:29 Point started: ret=0 05:27:29 point_skyscan result=0 05:27:30 Check angles 05:27:30 SkyScan query 05:27:30 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 05:27:30 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 05:27:30 Check angles 05:27:30 SkyScan query 05:27:31 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.75<-12050 Statuses=0009 0009 05:27:31 Msec=750 True Az=135.42 Ze=-0.75 Az status=0009 Ze status=0009 05:27:31 Check angles 05:27:31 SkyScan query 05:27:32 SkyScan query done: ret=0 az=118.035<-7869 ze=20.19<-10654 Statuses=0009 0009 05:27:32 Msec=1500 True Az=118.035 Ze=20.19 Az status=0009 Ze status=0009 05:27:32 Check angles 05:27:32 SkyScan query 05:27:32 SkyScan query done: ret=0 az=100.575<-6705 ze=41.16<-9256 Statuses=0009 0009 05:27:32 Msec=2250 True Az=100.575 Ze=41.16 Az status=0009 Ze status=0009 05:27:33 Check angles 05:27:33 SkyScan query 05:27:33 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 05:27:33 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 05:27:33 Check angles 05:27:33 SkyScan query 05:27:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:27:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:27:34 Message to Master queued w/err=0: serial=106244 error=0 05:27:39 Received message from Master: op=Filter serial=106245 05:27:39 Color wheel filter change from 0 to 0 05:27:39 FLIGetFilterPos err=0 currentPosition=0 05:27:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:39 Filter is already there-color wheel unchanged 05:27:39 Received message from Master: op=Shutter serial=106246 05:27:39 Shutter LASER close 05:27:39 Received message from Camera: op=State serial=106248 05:27:39 GetSingleValue result=40 Value=cccccccc 05:27:39 SkyScan query 05:27:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:27:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:40 Parameters OK 05:27:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:40 Set A/D data flow result=40 05:27:40 Set A/D channel type result=40 05:27:40 Set A/D encoding result=40 05:27:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:40 Set channel filter=0.000000e+000 result=40 05:27:40 Config A/D Result=40 05:27:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:40 Get A/D filter: -9.255963e+061 result=40 05:27:40 Get A/D value=-858993460 result=40 05:27:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:40 Parameters OK 05:27:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:40 Set A/D data flow result=40 05:27:40 Set A/D channel type result=40 05:27:40 Set A/D encoding result=40 05:27:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:40 Set channel filter=0.000000e+000 result=40 05:27:40 Config A/D Result=40 05:27:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:40 Get A/D filter: -9.255963e+061 result=40 05:27:40 Get A/D value=-858993460 result=40 05:27:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:40 Aux= 05:27:40 Message to Camera, serial 106248 queued 05:28:17 Received message from Master: op=PointingHead serial=106261 05:28:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:28:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:28:17 Point started: ret=0 05:28:17 point_skyscan result=0 05:28:18 Check angles 05:28:18 SkyScan query 05:28:18 SkyScan query done: ret=0 az=109.35<-7290 ze=38.49<-9434 Statuses=0009 0008 05:28:18 Msec=0 True Az=109.35 Ze=38.49 Az status=0009 Ze status=0008 05:28:18 Check angles 05:28:18 SkyScan query 05:28:19 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 05:28:19 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 05:28:19 Check angles 05:28:19 SkyScan query 05:28:20 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 05:28:20 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 05:28:20 Check angles 05:28:20 SkyScan query 05:28:21 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 05:28:21 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 05:28:21 Check angles 05:28:21 SkyScan query 05:28:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:28:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:28:21 Check angles 05:28:21 SkyScan query 05:28:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:28:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:28:22 Message to Master queued w/err=0: serial=106261 error=0 05:28:27 Received message from Master: op=Filter serial=106262 05:28:27 Color wheel filter change from 0 to 0 05:28:27 FLIGetFilterPos err=0 currentPosition=0 05:28:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:27 Filter is already there-color wheel unchanged 05:28:27 Received message from Master: op=Shutter serial=106263 05:28:27 Shutter LASER close 05:28:27 Received message from Camera: op=State serial=106265 05:28:27 GetSingleValue result=40 Value=cccccccc 05:28:27 SkyScan query 05:28:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:28:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:28 Parameters OK 05:28:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:28 Set A/D data flow result=40 05:28:28 Set A/D channel type result=40 05:28:28 Set A/D encoding result=40 05:28:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:28 Set channel filter=0.000000e+000 result=40 05:28:28 Config A/D Result=40 05:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:28 Get A/D filter: -9.255963e+061 result=40 05:28:28 Get A/D value=-858993460 result=40 05:28:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:28 Parameters OK 05:28:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:28 Set A/D data flow result=40 05:28:28 Set A/D channel type result=40 05:28:28 Set A/D encoding result=40 05:28:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:28 Set channel filter=0.000000e+000 result=40 05:28:28 Config A/D Result=40 05:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:28 Get A/D filter: -9.255963e+061 result=40 05:28:28 Get A/D value=-858993460 result=40 05:28:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:28 Aux= 05:28:28 Message to Camera, serial 106265 queued 05:29:04 Received message from Master: op=PointingHead serial=106277 05:29:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:29:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:29:04 Point started: ret=0 05:29:04 point_skyscan result=0 05:29:05 Check angles 05:29:05 SkyScan query 05:29:05 SkyScan query done: ret=0 az=152.955<-10197 ze=8.715<-11419 Statuses=0009 0009 05:29:05 Msec=0 True Az=152.955 Ze=8.715 Az status=0009 Ze status=0009 05:29:06 Check angles 05:29:06 SkyScan query 05:29:06 SkyScan query done: ret=0 az=135.615<-9041 ze=-12.24<-12816 Statuses=0009 0009 05:29:06 Msec=750 True Az=135.615 Ze=-12.24 Az status=0009 Ze status=0009 05:29:06 Check angles 05:29:06 SkyScan query 05:29:07 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.18<-14212 Statuses=0009 0009 05:29:07 Msec=1500 True Az=118.02 Ze=-33.18 Az status=0009 Ze status=0009 05:29:07 Check angles 05:29:07 SkyScan query 05:29:08 SkyScan query done: ret=0 az=100.305<-6687 ze=-51.555<-15437 Statuses=0009 0009 05:29:08 Msec=2250 True Az=100.305 Ze=-51.555 Az status=0009 Ze status=0009 05:29:08 Check angles 05:29:08 SkyScan query 05:29:08 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:29:08 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:29:09 Check angles 05:29:09 SkyScan query 05:29:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:29:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:29:09 Message to Master queued w/err=0: serial=106277 error=0 05:29:14 Received message from Master: op=Filter serial=106278 05:29:14 Color wheel filter change from 0 to 0 05:29:14 FLIGetFilterPos err=0 currentPosition=0 05:29:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:14 Filter is already there-color wheel unchanged 05:29:14 Received message from Master: op=Shutter serial=106279 05:29:14 Shutter LASER close 05:29:14 Received message from Camera: op=State serial=106281 05:29:14 GetSingleValue result=40 Value=cccccccc 05:29:14 SkyScan query 05:29:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:29:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:15 Parameters OK 05:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:15 Set A/D data flow result=40 05:29:15 Set A/D channel type result=40 05:29:15 Set A/D encoding result=40 05:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:15 Set channel filter=0.000000e+000 result=40 05:29:15 Config A/D Result=40 05:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:15 Get A/D filter: -9.255963e+061 result=40 05:29:15 Get A/D value=-858993460 result=40 05:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:15 Parameters OK 05:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:15 Set A/D data flow result=40 05:29:15 Set A/D channel type result=40 05:29:15 Set A/D encoding result=40 05:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:15 Set channel filter=0.000000e+000 result=40 05:29:15 Config A/D Result=40 05:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:15 Get A/D filter: -9.255963e+061 result=40 05:29:15 Get A/D value=-858993460 result=40 05:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:15 Aux= 05:29:15 Message to Camera, serial 106281 queued 05:29:51 Received message from Master: op=PointingHead serial=106293 05:29:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:29:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:29:51 Point started: ret=0 05:29:51 point_skyscan result=0 05:29:52 Check angles 05:29:52 SkyScan query 05:29:53 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.225<-17415 Statuses=0009 0009 05:29:53 Msec=0 True Az=108.915 Ze=-81.225 Az status=0009 Ze status=0009 05:29:53 Check angles 05:29:53 SkyScan query 05:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 05:29:53 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 05:29:54 Check angles 05:29:54 SkyScan query 05:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.135<-20209 Statuses=0008 0009 05:29:54 Msec=1500 True Az=112.995 Ze=-123.135 Az status=0008 Ze status=0009 05:29:54 Check angles 05:29:54 SkyScan query 05:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.105<-21607 Statuses=0008 0009 05:29:55 Msec=2250 True Az=112.995 Ze=-144.105 Az status=0008 Ze status=0009 05:29:55 Check angles 05:29:55 SkyScan query 05:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.045<-23003 Statuses=0008 0009 05:29:56 Msec=3000 True Az=112.995 Ze=-165.045 Az status=0008 Ze status=0009 05:29:56 Check angles 05:29:56 SkyScan query 05:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:29:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:29:56 Message to Master queued w/err=0: serial=106293 error=0 05:30:01 Received message from Master: op=Filter serial=106294 05:30:01 Color wheel filter change from 0 to 0 05:30:01 FLIGetFilterPos err=0 currentPosition=0 05:30:01 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:01 Filter is already there-color wheel unchanged 05:30:02 Received message from Master: op=Shutter serial=106295 05:30:02 Shutter LASER open 05:30:02 Received message from Camera: op=State serial=106297 05:30:02 GetSingleValue result=40 Value=cccccccc 05:30:02 SkyScan query 05:30:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:30:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:02 Parameters OK 05:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:02 Set A/D data flow result=40 05:30:02 Set A/D channel type result=40 05:30:02 Set A/D encoding result=40 05:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:02 Set channel filter=0.000000e+000 result=40 05:30:02 Config A/D Result=40 05:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:02 Get A/D filter: -9.255963e+061 result=40 05:30:02 Get A/D value=-858993460 result=40 05:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:02 Parameters OK 05:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:02 Set A/D data flow result=40 05:30:02 Set A/D channel type result=40 05:30:02 Set A/D encoding result=40 05:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:02 Set channel filter=0.000000e+000 result=40 05:30:02 Config A/D Result=40 05:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:02 Get A/D filter: -9.255963e+061 result=40 05:30:02 Get A/D value=-858993460 result=40 05:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:02 Aux= 05:30:02 Message to Camera, serial 106297 queued 05:30:11 Received message from Master: op=Shutter serial=106307 05:30:11 Shutter LASER close 05:30:11 Received message from Master: op=PointingHead serial=106311 05:30:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:30:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:30:11 Point started: ret=0 05:30:11 point_skyscan result=0 05:30:12 Check angles 05:30:12 SkyScan query 05:30:13 SkyScan query done: ret=0 az=90.03<-6002 ze=157.395<-1507 Statuses=0009 0009 05:30:13 Msec=0 True Az=90.03 Ze=157.395 Az status=0009 Ze status=0009 05:30:13 Check angles 05:30:13 SkyScan query 05:30:14 SkyScan query done: ret=0 az=72.645<-4843 ze=136.425<-2905 Statuses=0009 0009 05:30:14 Msec=750 True Az=72.645 Ze=136.425 Az status=0009 Ze status=0009 05:30:14 Check angles 05:30:14 SkyScan query 05:30:14 SkyScan query done: ret=0 az=54.81<-3654 ze=115.065<-4329 Statuses=0009 0009 05:30:14 Msec=1500 True Az=54.81 Ze=115.065 Az status=0009 Ze status=0009 05:30:14 Check angles 05:30:14 SkyScan query 05:30:15 SkyScan query done: ret=0 az=40.875<-2725 ze=94.065<-5729 Statuses=0009 0009 05:30:15 Msec=2250 True Az=40.875 Ze=94.065 Az status=0009 Ze status=0009 05:30:15 Check angles 05:30:15 SkyScan query 05:30:16 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 05:30:16 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 05:30:16 Check angles 05:30:16 SkyScan query 05:30:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 05:30:17 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 05:30:17 Check angles 05:30:17 SkyScan query 05:30:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:30:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:30:17 Message to Master queued w/err=0: serial=106311 error=0 05:30:22 Received message from Master: op=Filter serial=106312 05:30:22 Color wheel filter change from 0 to 0 05:30:22 FLIGetFilterPos err=0 currentPosition=0 05:30:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:22 Filter is already there-color wheel unchanged 05:30:22 Received message from Master: op=Shutter serial=106313 05:30:22 Shutter LASER close 05:30:23 Received message from Camera: op=State serial=106315 05:30:23 GetSingleValue result=40 Value=cccccccc 05:30:23 SkyScan query 05:30:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:30:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:23 Parameters OK 05:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:23 Set A/D data flow result=40 05:30:23 Set A/D channel type result=40 05:30:23 Set A/D encoding result=40 05:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:23 Set channel filter=0.000000e+000 result=40 05:30:23 Config A/D Result=40 05:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:23 Get A/D filter: -9.255963e+061 result=40 05:30:23 Get A/D value=-858993460 result=40 05:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:23 Parameters OK 05:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:23 Set A/D data flow result=40 05:30:23 Set A/D channel type result=40 05:30:23 Set A/D encoding result=40 05:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:23 Set channel filter=0.000000e+000 result=40 05:30:23 Config A/D Result=40 05:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:23 Get A/D filter: -9.255963e+061 result=40 05:30:23 Get A/D value=-858993460 result=40 05:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:23 Aux= 05:30:23 Message to Camera, serial 106315 queued 05:31:00 Received message from Master: op=PointingHead serial=106328 05:31:00 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:31:00 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:31:00 Point started: ret=0 05:31:00 point_skyscan result=0 05:31:01 Check angles 05:31:01 SkyScan query 05:31:02 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 05:31:02 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 05:31:02 Check angles 05:31:02 SkyScan query 05:31:03 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 05:31:03 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 05:31:03 Check angles 05:31:03 SkyScan query 05:31:03 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 05:31:03 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 05:31:03 Check angles 05:31:03 SkyScan query 05:31:04 SkyScan query done: ret=0 az=117.255<-7817 ze=66.495<-7567 Statuses=0009 0008 05:31:04 Msec=2250 True Az=117.255 Ze=66.495 Az status=0009 Ze status=0008 05:31:04 Check angles 05:31:04 SkyScan query 05:31:05 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 05:31:05 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 05:31:05 Check angles 05:31:05 SkyScan query 05:31:06 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 05:31:06 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 05:31:06 Check angles 05:31:06 SkyScan query 05:31:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:31:06 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 05:31:06 Message to Master queued w/err=0: serial=106328 error=0 05:31:11 Received message from Master: op=Filter serial=106329 05:31:11 Color wheel filter change from 0 to 0 05:31:11 FLIGetFilterPos err=0 currentPosition=0 05:31:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:11 Filter is already there-color wheel unchanged 05:31:11 Received message from Master: op=Shutter serial=106330 05:31:11 Shutter LASER close 05:31:12 Received message from Camera: op=State serial=106332 05:31:12 GetSingleValue result=40 Value=cccccccc 05:31:12 SkyScan query 05:31:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:31:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:12 Parameters OK 05:31:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:12 Set A/D data flow result=40 05:31:12 Set A/D channel type result=40 05:31:12 Set A/D encoding result=40 05:31:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:12 Set channel filter=0.000000e+000 result=40 05:31:12 Config A/D Result=40 05:31:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:12 Get A/D filter: -9.255963e+061 result=40 05:31:12 Get A/D value=-858993460 result=40 05:31:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:12 Parameters OK 05:31:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:12 Set A/D data flow result=40 05:31:12 Set A/D channel type result=40 05:31:12 Set A/D encoding result=40 05:31:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:12 Set channel filter=0.000000e+000 result=40 05:31:12 Config A/D Result=40 05:31:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:12 Get A/D filter: -9.255963e+061 result=40 05:31:12 Get A/D value=-858993460 result=40 05:31:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:12 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:12 Aux= 05:31:12 Message to Camera, serial 106332 queued 05:31:49 Received message from Master: op=PointingHead serial=106345 05:31:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:31:49 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:31:49 Point started: ret=0 05:31:49 point_skyscan result=0 05:31:50 Check angles 05:31:50 SkyScan query 05:31:51 SkyScan query done: ret=0 az=135.18<-9012 ze=36.885<-9541 Statuses=0009 0009 05:31:51 Msec=0 True Az=135.18 Ze=36.885 Az status=0009 Ze status=0009 05:31:51 Check angles 05:31:51 SkyScan query 05:31:51 SkyScan query done: ret=0 az=117.675<-7845 ze=15.93<-10938 Statuses=0009 0009 05:31:51 Msec=750 True Az=117.675 Ze=15.93 Az status=0009 Ze status=0009 05:31:52 Check angles 05:31:52 SkyScan query 05:31:52 SkyScan query done: ret=0 az=100.29<-6686 ze=-5.025<-12335 Statuses=0009 0009 05:31:52 Msec=1500 True Az=100.29 Ze=-5.025 Az status=0009 Ze status=0009 05:31:52 Check angles 05:31:52 SkyScan query 05:31:53 SkyScan query done: ret=0 az=82.785<-5519 ze=-25.965<-13731 Statuses=0009 0009 05:31:53 Msec=2250 True Az=82.785 Ze=-25.965 Az status=0009 Ze status=0009 05:31:53 Check angles 05:31:53 SkyScan query 05:31:54 SkyScan query done: ret=0 az=65.295<-4353 ze=-38.565<-14571 Statuses=0009 0008 05:31:54 Msec=3000 True Az=65.295 Ze=-38.565 Az status=0009 Ze status=0008 05:31:54 Check angles 05:31:54 SkyScan query 05:31:54 SkyScan query done: ret=0 az=47.895<-3193 ze=-38.535<-14569 Statuses=0009 0008 05:31:54 Msec=3750 True Az=47.895 Ze=-38.535 Az status=0009 Ze status=0008 05:31:55 Check angles 05:31:55 SkyScan query 05:31:55 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 05:31:55 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 05:31:55 Message to Master queued w/err=0: serial=106345 error=0 05:32:00 Received message from Master: op=Filter serial=106346 05:32:00 Color wheel filter change from 0 to 0 05:32:00 FLIGetFilterPos err=0 currentPosition=0 05:32:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:00 Filter is already there-color wheel unchanged 05:32:00 Received message from Master: op=Shutter serial=106347 05:32:00 Shutter LASER close 05:32:00 Received message from Camera: op=State serial=106349 05:32:00 GetSingleValue result=40 Value=cccccccc 05:32:00 SkyScan query 05:32:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:32:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:01 Parameters OK 05:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:01 Set A/D data flow result=40 05:32:01 Set A/D channel type result=40 05:32:01 Set A/D encoding result=40 05:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:01 Set channel filter=0.000000e+000 result=40 05:32:01 Config A/D Result=40 05:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:01 Get A/D filter: -9.255963e+061 result=40 05:32:01 Get A/D value=-858993460 result=40 05:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:01 Parameters OK 05:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:01 Set A/D data flow result=40 05:32:01 Set A/D channel type result=40 05:32:01 Set A/D encoding result=40 05:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:01 Set channel filter=0.000000e+000 result=40 05:32:01 Config A/D Result=40 05:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:01 Get A/D filter: -9.255963e+061 result=40 05:32:01 Get A/D value=-858993460 result=40 05:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:01 Aux= 05:32:01 Message to Camera, serial 106349 queued 05:32:38 Received message from Master: op=PointingHead serial=106362 05:32:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:32:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:32:38 Point started: ret=0 05:32:38 point_skyscan result=0 05:32:39 Check angles 05:32:39 SkyScan query 05:32:39 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.325<-16555 Statuses=0009 0009 05:32:39 Msec=0 True Az=64.02 Ze=-68.325 Az status=0009 Ze status=0009 05:32:40 Check angles 05:32:40 SkyScan query 05:32:40 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.31<-17954 Statuses=0009 0009 05:32:40 Msec=750 True Az=81.375 Ze=-89.31 Az status=0009 Ze status=0009 05:32:40 Check angles 05:32:40 SkyScan query 05:32:41 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.265<-19351 Statuses=0009 0009 05:32:41 Msec=1500 True Az=98.895 Ze=-110.265 Az status=0009 Ze status=0009 05:32:41 Check angles 05:32:41 SkyScan query 05:32:42 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.205<-20747 Statuses=0009 0009 05:32:42 Msec=2250 True Az=116.445 Ze=-131.205 Az status=0009 Ze status=0009 05:32:42 Check angles 05:32:42 SkyScan query 05:32:42 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 05:32:42 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 05:32:43 Check angles 05:32:43 SkyScan query 05:32:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:32:43 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:32:43 Message to Master queued w/err=0: serial=106362 error=0 05:32:48 Received message from Master: op=Filter serial=106363 05:32:48 Color wheel filter change from 0 to 0 05:32:48 FLIGetFilterPos err=0 currentPosition=0 05:32:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:48 Filter is already there-color wheel unchanged 05:32:48 Received message from Master: op=Shutter serial=106364 05:32:48 Shutter LASER close 05:32:48 Received message from Camera: op=State serial=106366 05:32:48 GetSingleValue result=40 Value=cccccccc 05:32:48 SkyScan query 05:32:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:32:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:49 Parameters OK 05:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:49 Set A/D data flow result=40 05:32:49 Set A/D channel type result=40 05:32:49 Set A/D encoding result=40 05:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:49 Set channel filter=0.000000e+000 result=40 05:32:49 Config A/D Result=40 05:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:49 Get A/D filter: -9.255963e+061 result=40 05:32:49 Get A/D value=-858993460 result=40 05:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:49 Parameters OK 05:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:49 Set A/D data flow result=40 05:32:49 Set A/D channel type result=40 05:32:49 Set A/D encoding result=40 05:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:49 Set channel filter=0.000000e+000 result=40 05:32:49 Config A/D Result=40 05:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:49 Get A/D filter: -9.255963e+061 result=40 05:32:49 Get A/D value=-858993460 result=40 05:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:49 Aux= 05:32:49 Message to Camera, serial 106366 queued 05:33:26 Received message from Master: op=PointingHead serial=106379 05:33:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:33:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:33:26 Point started: ret=0 05:33:26 point_skyscan result=0 05:33:27 Check angles 05:33:27 SkyScan query 05:33:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 05:33:27 Msec=0 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 05:33:28 Check angles 05:33:28 SkyScan query 05:33:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:33:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:33:28 Message to Master queued w/err=0: serial=106379 error=0 05:33:33 Received message from Master: op=Filter serial=106380 05:33:33 Color wheel filter change from 0 to 0 05:33:33 FLIGetFilterPos err=0 currentPosition=0 05:33:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:33 Filter is already there-color wheel unchanged 05:33:33 Received message from Master: op=Shutter serial=106381 05:33:33 Shutter LASER open 05:33:34 Received message from Camera: op=State serial=106383 05:33:34 GetSingleValue result=40 Value=cccccccc 05:33:34 SkyScan query 05:33:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:33:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:34 Parameters OK 05:33:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:34 Set A/D data flow result=40 05:33:34 Set A/D channel type result=40 05:33:34 Set A/D encoding result=40 05:33:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:34 Set channel filter=0.000000e+000 result=40 05:33:34 Config A/D Result=40 05:33:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:34 Get A/D filter: -9.255963e+061 result=40 05:33:34 Get A/D value=-858993460 result=40 05:33:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:34 Parameters OK 05:33:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:34 Set A/D data flow result=40 05:33:34 Set A/D channel type result=40 05:33:34 Set A/D encoding result=40 05:33:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:34 Set channel filter=0.000000e+000 result=40 05:33:34 Config A/D Result=40 05:33:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:34 Get A/D filter: -9.255963e+061 result=40 05:33:34 Get A/D value=-858993460 result=40 05:33:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:34 Aux= 05:33:34 Message to Camera, serial 106383 queued 05:33:43 Received message from Master: op=Shutter serial=106393 05:33:43 Shutter LASER close 05:33:43 Received message from Master: op=PointingHead serial=106397 05:33:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:33:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:33:44 Point started: ret=0 05:33:44 point_skyscan result=0 05:33:44 Check angles 05:33:44 SkyScan query 05:33:45 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.565<-21571 Statuses=0009 0009 05:33:45 Msec=0 True Az=135.765 Ze=-143.565 Az status=0009 Ze status=0009 05:33:45 Check angles 05:33:45 SkyScan query 05:33:46 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.49<-20166 Statuses=0009 0009 05:33:46 Msec=750 True Az=153.225 Ze=-122.49 Az status=0009 Ze status=0009 05:33:46 Check angles 05:33:46 SkyScan query 05:33:46 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.235<-18749 Statuses=0009 0009 05:33:46 Msec=1500 True Az=171.075 Ze=-101.235 Az status=0009 Ze status=0009 05:33:47 Check angles 05:33:47 SkyScan query 05:33:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.28<-17352 Statuses=0008 0009 05:33:47 Msec=2250 True Az=176.01 Ze=-80.28 Az status=0008 Ze status=0009 05:33:47 Check angles 05:33:47 SkyScan query 05:33:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.325<-15955 Statuses=0008 0009 05:33:48 Msec=3000 True Az=176.01 Ze=-59.325 Az status=0008 Ze status=0009 05:33:48 Check angles 05:33:48 SkyScan query 05:33:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:33:49 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:33:49 Message to Master queued w/err=0: serial=106397 error=0 05:33:54 Received message from Master: op=Filter serial=106398 05:33:54 Color wheel filter change from 0 to 0 05:33:54 FLIGetFilterPos err=0 currentPosition=0 05:33:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:54 Filter is already there-color wheel unchanged 05:33:54 Received message from Master: op=Shutter serial=106399 05:33:54 Shutter LASER close 05:33:54 Received message from Camera: op=State serial=106401 05:33:54 GetSingleValue result=40 Value=cccccccc 05:33:54 SkyScan query 05:33:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:33:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:55 Parameters OK 05:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:55 Set A/D data flow result=40 05:33:55 Set A/D channel type result=40 05:33:55 Set A/D encoding result=40 05:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:55 Set channel filter=0.000000e+000 result=40 05:33:55 Config A/D Result=40 05:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:55 Get A/D filter: -9.255963e+061 result=40 05:33:55 Get A/D value=-858993460 result=40 05:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:55 Parameters OK 05:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:55 Set A/D data flow result=40 05:33:55 Set A/D channel type result=40 05:33:55 Set A/D encoding result=40 05:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:55 Set channel filter=0.000000e+000 result=40 05:33:55 Config A/D Result=40 05:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:55 Get A/D filter: -9.255963e+061 result=40 05:33:55 Get A/D value=-858993460 result=40 05:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:55 Aux= 05:33:55 Message to Camera, serial 106401 queued 05:34:31 Received message from Master: op=PointingHead serial=106414 05:34:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:34:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:34:32 Point started: ret=0 05:34:32 point_skyscan result=0 05:34:33 Check angles 05:34:33 SkyScan query 05:34:33 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.975<-13465 Statuses=0009 0009 05:34:33 Msec=0 True Az=153.18 Ze=-21.975 Az status=0009 Ze status=0009 05:34:33 Check angles 05:34:33 SkyScan query 05:34:34 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.975<-12065 Statuses=0009 0009 05:34:34 Msec=750 True Az=135.735 Ze=-0.975 Az status=0009 Ze status=0009 05:34:34 Check angles 05:34:34 SkyScan query 05:34:35 SkyScan query done: ret=0 az=118.23<-7882 ze=19.965<-10669 Statuses=0009 0009 05:34:35 Msec=1500 True Az=118.23 Ze=19.965 Az status=0009 Ze status=0009 05:34:35 Check angles 05:34:35 SkyScan query 05:34:35 SkyScan query done: ret=0 az=100.83<-6722 ze=40.935<-9271 Statuses=0009 0009 05:34:35 Msec=2250 True Az=100.83 Ze=40.935 Az status=0009 Ze status=0009 05:34:36 Check angles 05:34:36 SkyScan query 05:34:36 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 05:34:36 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 05:34:36 Check angles 05:34:36 SkyScan query 05:34:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:34:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:34:37 Message to Master queued w/err=0: serial=106414 error=0 05:34:42 Received message from Master: op=Filter serial=106415 05:34:42 Color wheel filter change from 0 to 0 05:34:42 FLIGetFilterPos err=0 currentPosition=0 05:34:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:42 Filter is already there-color wheel unchanged 05:34:42 Received message from Master: op=Shutter serial=106416 05:34:42 Shutter LASER close 05:34:42 Received message from Camera: op=State serial=106418 05:34:42 GetSingleValue result=40 Value=cccccccc 05:34:42 SkyScan query 05:34:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:34:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:43 Parameters OK 05:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:43 Set A/D data flow result=40 05:34:43 Set A/D channel type result=40 05:34:43 Set A/D encoding result=40 05:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:43 Set channel filter=0.000000e+000 result=40 05:34:43 Config A/D Result=40 05:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:43 Get A/D filter: -9.255963e+061 result=40 05:34:43 Get A/D value=-858993460 result=40 05:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:43 Parameters OK 05:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:43 Set A/D data flow result=40 05:34:43 Set A/D channel type result=40 05:34:43 Set A/D encoding result=40 05:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:43 Set channel filter=0.000000e+000 result=40 05:34:43 Config A/D Result=40 05:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:43 Get A/D filter: -9.255963e+061 result=40 05:34:43 Get A/D value=-858993460 result=40 05:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:43 Aux= 05:34:43 Message to Camera, serial 106418 queued 05:35:19 Received message from Master: op=PointingHead serial=106431 05:35:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:35:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:35:20 Point started: ret=0 05:35:20 point_skyscan result=0 05:35:21 Check angles 05:35:21 SkyScan query 05:35:21 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 05:35:21 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 05:35:21 Check angles 05:35:21 SkyScan query 05:35:22 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 05:35:22 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 05:35:22 Check angles 05:35:22 SkyScan query 05:35:23 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 05:35:23 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 05:35:23 Check angles 05:35:23 SkyScan query 05:35:23 SkyScan query done: ret=0 az=161.835<-10789 ze=38.505<-9433 Statuses=0009 0008 05:35:23 Msec=2250 True Az=161.835 Ze=38.505 Az status=0009 Ze status=0008 05:35:24 Check angles 05:35:24 SkyScan query 05:35:24 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:35:24 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:35:24 Check angles 05:35:24 SkyScan query 05:35:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:35:25 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:35:25 Message to Master queued w/err=0: serial=106431 error=0 05:35:30 Received message from Master: op=Filter serial=106432 05:35:30 Color wheel filter change from 0 to 0 05:35:30 FLIGetFilterPos err=0 currentPosition=0 05:35:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:30 Filter is already there-color wheel unchanged 05:35:30 Received message from Master: op=Shutter serial=106433 05:35:30 Shutter LASER close 05:35:30 Received message from Camera: op=State serial=106435 05:35:30 GetSingleValue result=40 Value=cccccccc 05:35:30 SkyScan query [UTC 2018-12-13 05:35:31] 05:35:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:35:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:31 Parameters OK 05:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:31 Set A/D data flow result=40 05:35:31 Set A/D channel type result=40 05:35:31 Set A/D encoding result=40 05:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:31 Set channel filter=0.000000e+000 result=40 05:35:31 Config A/D Result=40 05:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:31 Get A/D filter: -9.255963e+061 result=40 05:35:31 Get A/D value=-858993460 result=40 05:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:31 Parameters OK 05:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:31 Set A/D data flow result=40 05:35:31 Set A/D channel type result=40 05:35:31 Set A/D encoding result=40 05:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:31 Set channel filter=0.000000e+000 result=40 05:35:31 Config A/D Result=40 05:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:31 Get A/D filter: -9.255963e+061 result=40 05:35:31 Get A/D value=-858993460 result=40 05:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:31 Aux= 05:35:31 Message to Camera, serial 106435 queued [UTC 2018-12-13 05:35:52] 05:36:08 Received message from Master: op=PointingHead serial=106448 05:36:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:36:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:36:08 Point started: ret=0 05:36:08 point_skyscan result=0 05:36:09 Check angles 05:36:09 SkyScan query 05:36:09 SkyScan query done: ret=0 az=153.165<-10211 ze=8.88<-11408 Statuses=0009 0009 05:36:09 Msec=0 True Az=153.165 Ze=8.88 Az status=0009 Ze status=0009 05:36:09 Check angles 05:36:09 SkyScan query 05:36:10 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.075<-12805 Statuses=0009 0009 05:36:10 Msec=750 True Az=135.735 Ze=-12.075 Az status=0009 Ze status=0009 05:36:10 Check angles 05:36:10 SkyScan query 05:36:11 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.45<-14230 Statuses=0009 0009 05:36:11 Msec=1500 True Az=117.795 Ze=-33.45 Az status=0009 Ze status=0009 05:36:11 Check angles 05:36:11 SkyScan query 05:36:12 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.555<-15437 Statuses=0009 0009 05:36:12 Msec=2250 True Az=100.065 Ze=-51.555 Az status=0009 Ze status=0009 05:36:12 Check angles 05:36:12 SkyScan query 05:36:12 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:36:12 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:36:12 Check angles 05:36:12 SkyScan query 05:36:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:36:13 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:36:13 Message to Master queued w/err=0: serial=106448 error=0 05:36:18 Received message from Master: op=Filter serial=106449 05:36:18 Color wheel filter change from 0 to 0 05:36:18 FLIGetFilterPos err=0 currentPosition=0 05:36:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:18 Filter is already there-color wheel unchanged 05:36:18 Received message from Master: op=Shutter serial=106450 05:36:18 Shutter LASER close 05:36:18 Received message from Camera: op=State serial=106452 05:36:18 GetSingleValue result=40 Value=cccccccc 05:36:18 SkyScan query 05:36:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:36:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:19 Parameters OK 05:36:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:19 Set A/D data flow result=40 05:36:19 Set A/D channel type result=40 05:36:19 Set A/D encoding result=40 05:36:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:19 Set channel filter=0.000000e+000 result=40 05:36:19 Config A/D Result=40 05:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:19 Get A/D filter: -9.255963e+061 result=40 05:36:19 Get A/D value=-858993460 result=40 05:36:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:19 Parameters OK 05:36:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:19 Set A/D data flow result=40 05:36:19 Set A/D channel type result=40 05:36:19 Set A/D encoding result=40 05:36:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:19 Set channel filter=0.000000e+000 result=40 05:36:19 Config A/D Result=40 05:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:19 Get A/D filter: -9.255963e+061 result=40 05:36:19 Get A/D value=-858993460 result=40 05:36:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:19 Aux= 05:36:19 Message to Camera, serial 106452 queued 05:36:56 Received message from Master: op=PointingHead serial=106465 05:36:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:36:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:36:56 Point started: ret=0 05:36:56 point_skyscan result=0 05:36:57 Check angles 05:36:57 SkyScan query 05:36:57 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.06<-17404 Statuses=0009 0009 05:36:57 Msec=0 True Az=108.825 Ze=-81.06 Az status=0009 Ze status=0009 05:36:57 Check angles 05:36:57 SkyScan query 05:36:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 05:36:58 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 05:36:58 Check angles 05:36:58 SkyScan query 05:36:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 05:36:59 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 05:36:59 Check angles 05:36:59 SkyScan query 05:37:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 05:37:00 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 05:37:00 Check angles 05:37:00 SkyScan query 05:37:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 05:37:00 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 05:37:00 Check angles 05:37:00 SkyScan query 05:37:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:37:01 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:37:01 Message to Master queued w/err=0: serial=106465 error=0 05:37:06 Received message from Master: op=Filter serial=106466 05:37:06 Color wheel filter change from 0 to 0 05:37:06 FLIGetFilterPos err=0 currentPosition=0 05:37:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:06 Filter is already there-color wheel unchanged 05:37:06 Received message from Master: op=Shutter serial=106467 05:37:06 Shutter LASER open 05:37:06 Received message from Camera: op=State serial=106469 05:37:06 GetSingleValue result=40 Value=cccccccc 05:37:06 SkyScan query 05:37:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:37:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:07 Parameters OK 05:37:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:07 Set A/D data flow result=40 05:37:07 Set A/D channel type result=40 05:37:07 Set A/D encoding result=40 05:37:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:07 Set channel filter=0.000000e+000 result=40 05:37:07 Config A/D Result=40 05:37:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:07 Get A/D filter: -9.255963e+061 result=40 05:37:07 Get A/D value=-858993460 result=40 05:37:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:07 Parameters OK 05:37:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:07 Set A/D data flow result=40 05:37:07 Set A/D channel type result=40 05:37:07 Set A/D encoding result=40 05:37:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:07 Set channel filter=0.000000e+000 result=40 05:37:07 Config A/D Result=40 05:37:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:07 Get A/D filter: -9.255963e+061 result=40 05:37:07 Get A/D value=-858993460 result=40 05:37:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:07 Aux= 05:37:07 Message to Camera, serial 106469 queued 05:37:15 Received message from Master: op=Shutter serial=106479 05:37:15 Shutter LASER close 05:37:16 Received message from Master: op=PointingHead serial=106483 05:37:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:37:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:37:16 Point started: ret=0 05:37:16 point_skyscan result=0 05:37:17 Check angles 05:37:17 SkyScan query 05:37:18 SkyScan query done: ret=0 az=90.165<-6011 ze=157.575<-1495 Statuses=0009 0009 05:37:18 Msec=0 True Az=90.165 Ze=157.575 Az status=0009 Ze status=0009 05:37:18 Check angles 05:37:18 SkyScan query 05:37:18 SkyScan query done: ret=0 az=72.81<-4854 ze=136.575<-2895 Statuses=0009 0009 05:37:18 Msec=750 True Az=72.81 Ze=136.575 Az status=0009 Ze status=0009 05:37:18 Check angles 05:37:18 SkyScan query 05:37:19 SkyScan query done: ret=0 az=55.2<-3680 ze=115.695<-4287 Statuses=0009 0009 05:37:19 Msec=1500 True Az=55.2 Ze=115.695 Az status=0009 Ze status=0009 05:37:19 Check angles 05:37:19 SkyScan query 05:37:20 SkyScan query done: ret=0 az=40.89<-2726 ze=94.695<-5687 Statuses=0009 0009 05:37:20 Msec=2250 True Az=40.89 Ze=94.695 Az status=0009 Ze status=0009 05:37:20 Check angles 05:37:20 SkyScan query 05:37:21 SkyScan query done: ret=0 az=40.995<-2733 ze=73.755<-7083 Statuses=0008 0009 05:37:21 Msec=3000 True Az=40.995 Ze=73.755 Az status=0008 Ze status=0009 05:37:21 Check angles 05:37:21 SkyScan query 05:37:21 SkyScan query done: ret=0 az=40.995<-2733 ze=53.055<-8463 Statuses=0008 0009 05:37:21 Msec=3750 True Az=40.995 Ze=53.055 Az status=0008 Ze status=0009 05:37:21 Check angles 05:37:21 SkyScan query 05:37:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:37:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:37:22 Message to Master queued w/err=0: serial=106483 error=0 05:37:27 Received message from Master: op=Filter serial=106484 05:37:27 Color wheel filter change from 0 to 0 05:37:27 FLIGetFilterPos err=0 currentPosition=0 05:37:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:27 Filter is already there-color wheel unchanged 05:37:27 Received message from Master: op=Shutter serial=106485 05:37:27 Shutter LASER close 05:37:27 Received message from Camera: op=State serial=106487 05:37:27 GetSingleValue result=40 Value=cccccccc 05:37:27 SkyScan query 05:37:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:37:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:28 Parameters OK 05:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:28 Set A/D data flow result=40 05:37:28 Set A/D channel type result=40 05:37:28 Set A/D encoding result=40 05:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:28 Set channel filter=0.000000e+000 result=40 05:37:28 Config A/D Result=40 05:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:28 Get A/D filter: -9.255963e+061 result=40 05:37:28 Get A/D value=-858993460 result=40 05:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:28 Parameters OK 05:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:28 Set A/D data flow result=40 05:37:28 Set A/D channel type result=40 05:37:28 Set A/D encoding result=40 05:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:28 Set channel filter=0.000000e+000 result=40 05:37:28 Config A/D Result=40 05:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:28 Get A/D filter: -9.255963e+061 result=40 05:37:28 Get A/D value=-858993460 result=40 05:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:28 Aux= 05:37:28 Message to Camera, serial 106487 queued 05:38:05 Received message from Master: op=PointingHead serial=106500 05:38:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:38:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:38:05 Point started: ret=0 05:38:05 point_skyscan result=0 05:38:06 Check angles 05:38:06 SkyScan query 05:38:06 SkyScan query done: ret=0 az=64.275<-4285 ze=66.555<-7563 Statuses=0009 0008 05:38:06 Msec=0 True Az=64.275 Ze=66.555 Az status=0009 Ze status=0008 05:38:07 Check angles 05:38:07 SkyScan query 05:38:07 SkyScan query done: ret=0 az=81.645<-5443 ze=66.495<-7567 Statuses=0009 0008 05:38:07 Msec=750 True Az=81.645 Ze=66.495 Az status=0009 Ze status=0008 05:38:07 Check angles 05:38:07 SkyScan query 05:38:08 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 05:38:08 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 05:38:08 Check angles 05:38:08 SkyScan query 05:38:09 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 05:38:09 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 05:38:09 Check angles 05:38:09 SkyScan query 05:38:09 SkyScan query done: ret=0 az=134.28<-8952 ze=66.495<-7567 Statuses=0009 0008 05:38:09 Msec=3000 True Az=134.28 Ze=66.495 Az status=0009 Ze status=0008 05:38:10 Check angles 05:38:10 SkyScan query 05:38:10 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 05:38:10 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 05:38:10 Check angles 05:38:10 SkyScan query 05:38:11 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:38:11 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:38:11 Message to Master queued w/err=0: serial=106500 error=0 05:38:16 Received message from Master: op=Filter serial=106501 05:38:16 Color wheel filter change from 0 to 0 05:38:16 FLIGetFilterPos err=0 currentPosition=0 05:38:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:16 Filter is already there-color wheel unchanged 05:38:16 Received message from Master: op=Shutter serial=106502 05:38:16 Shutter LASER close 05:38:16 Received message from Camera: op=State serial=106504 05:38:16 GetSingleValue result=40 Value=cccccccc 05:38:16 SkyScan query 05:38:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:38:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:17 Parameters OK 05:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:17 Set A/D data flow result=40 05:38:17 Set A/D channel type result=40 05:38:17 Set A/D encoding result=40 05:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:17 Set channel filter=0.000000e+000 result=40 05:38:17 Config A/D Result=40 05:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:17 Get A/D filter: -9.255963e+061 result=40 05:38:17 Get A/D value=-858993460 result=40 05:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:17 Parameters OK 05:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:17 Set A/D data flow result=40 05:38:17 Set A/D channel type result=40 05:38:17 Set A/D encoding result=40 05:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:17 Set channel filter=0.000000e+000 result=40 05:38:17 Config A/D Result=40 05:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:17 Get A/D filter: -9.255963e+061 result=40 05:38:17 Get A/D value=-858993460 result=40 05:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:17 Aux= 05:38:17 Message to Camera, serial 106504 queued 05:38:54 Received message from Master: op=PointingHead serial=106517 05:38:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:38:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:38:54 Point started: ret=0 05:38:54 point_skyscan result=0 05:38:55 Check angles 05:38:55 SkyScan query 05:38:55 SkyScan query done: ret=0 az=135.105<-9007 ze=36.795<-9547 Statuses=0009 0009 05:38:55 Msec=0 True Az=135.105 Ze=36.795 Az status=0009 Ze status=0009 05:38:56 Check angles 05:38:56 SkyScan query 05:38:56 SkyScan query done: ret=0 az=117.195<-7813 ze=15.48<-10968 Statuses=0009 0009 05:38:56 Msec=750 True Az=117.195 Ze=15.48 Az status=0009 Ze status=0009 05:38:56 Check angles 05:38:56 SkyScan query 05:38:57 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.52<-12368 Statuses=0009 0009 05:38:57 Msec=1500 True Az=99.9 Ze=-5.52 Az status=0009 Ze status=0009 05:38:57 Check angles 05:38:57 SkyScan query 05:38:58 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.43<-13762 Statuses=0009 0009 05:38:58 Msec=2250 True Az=82.365 Ze=-26.43 Az status=0009 Ze status=0009 05:38:58 Check angles 05:38:58 SkyScan query 05:38:58 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.565<-14571 Statuses=0009 0008 05:38:58 Msec=3000 True Az=64.545 Ze=-38.565 Az status=0009 Ze status=0008 05:38:59 Check angles 05:38:59 SkyScan query 05:38:59 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.535<-14569 Statuses=0009 0008 05:38:59 Msec=3750 True Az=47.085 Ze=-38.535 Az status=0009 Ze status=0008 05:38:59 Check angles 05:38:59 SkyScan query 05:39:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:39:00 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:39:00 Message to Master queued w/err=0: serial=106517 error=0 05:39:05 Received message from Master: op=Filter serial=106518 05:39:05 Color wheel filter change from 0 to 0 05:39:05 FLIGetFilterPos err=0 currentPosition=0 05:39:05 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:05 Filter is already there-color wheel unchanged 05:39:05 Received message from Master: op=Shutter serial=106519 05:39:05 Shutter LASER close 05:39:05 Received message from Camera: op=State serial=106521 05:39:05 GetSingleValue result=40 Value=cccccccc 05:39:05 SkyScan query 05:39:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:39:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:06 Parameters OK 05:39:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:06 Set A/D data flow result=40 05:39:06 Set A/D channel type result=40 05:39:06 Set A/D encoding result=40 05:39:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:06 Set channel filter=0.000000e+000 result=40 05:39:06 Config A/D Result=40 05:39:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:06 Get A/D filter: -9.255963e+061 result=40 05:39:06 Get A/D value=-858993460 result=40 05:39:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:06 Parameters OK 05:39:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:06 Set A/D data flow result=40 05:39:06 Set A/D channel type result=40 05:39:06 Set A/D encoding result=40 05:39:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:06 Set channel filter=0.000000e+000 result=40 05:39:06 Config A/D Result=40 05:39:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:06 Get A/D filter: -9.255963e+061 result=40 05:39:06 Get A/D value=-858993460 result=40 05:39:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:06 Aux= 05:39:06 Message to Camera, serial 106521 queued 05:39:43 Received message from Master: op=PointingHead serial=106534 05:39:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:39:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:39:43 Point started: ret=0 05:39:43 point_skyscan result=0 05:39:44 Check angles 05:39:44 SkyScan query 05:39:44 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.145<-16543 Statuses=0009 0009 05:39:44 Msec=0 True Az=63.87 Ze=-68.145 Az status=0009 Ze status=0009 05:39:44 Check angles 05:39:44 SkyScan query 05:39:45 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.145<-17943 Statuses=0009 0009 05:39:45 Msec=750 True Az=81.315 Ze=-89.145 Az status=0009 Ze status=0009 05:39:45 Check angles 05:39:45 SkyScan query 05:39:46 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.535<-19369 Statuses=0009 0009 05:39:46 Msec=1500 True Az=99.195 Ze=-110.535 Az status=0009 Ze status=0009 05:39:46 Check angles 05:39:46 SkyScan query 05:39:46 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.475<-20765 Statuses=0009 0009 05:39:46 Msec=2250 True Az=116.895 Ze=-131.475 Az status=0009 Ze status=0009 05:39:47 Check angles 05:39:47 SkyScan query 05:39:47 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 05:39:47 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 05:39:47 Check angles 05:39:47 SkyScan query 05:39:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:39:48 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:39:48 Message to Master queued w/err=0: serial=106534 error=0 05:39:53 Received message from Master: op=Filter serial=106535 05:39:53 Color wheel filter change from 0 to 0 05:39:53 FLIGetFilterPos err=0 currentPosition=0 05:39:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:53 Filter is already there-color wheel unchanged 05:39:53 Received message from Master: op=Shutter serial=106536 05:39:53 Shutter LASER close 05:39:53 Received message from Camera: op=State serial=106538 05:39:53 GetSingleValue result=40 Value=cccccccc 05:39:53 SkyScan query 05:39:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:39:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:54 Parameters OK 05:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:54 Set A/D data flow result=40 05:39:54 Set A/D channel type result=40 05:39:54 Set A/D encoding result=40 05:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:54 Set channel filter=0.000000e+000 result=40 05:39:54 Config A/D Result=40 05:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:54 Get A/D filter: -9.255963e+061 result=40 05:39:54 Get A/D value=-858993460 result=40 05:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:54 Parameters OK 05:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:54 Set A/D data flow result=40 05:39:54 Set A/D channel type result=40 05:39:54 Set A/D encoding result=40 05:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:54 Set channel filter=0.000000e+000 result=40 05:39:54 Config A/D Result=40 05:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:54 Get A/D filter: -9.255963e+061 result=40 05:39:54 Get A/D value=-858993460 result=40 05:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:54 Aux= 05:39:54 Message to Camera, serial 106538 queued 05:40:31 Received message from Master: op=PointingHead serial=106551 05:40:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:40:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:40:31 Point started: ret=0 05:40:31 point_skyscan result=0 05:40:32 Check angles 05:40:32 SkyScan query 05:40:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 05:40:32 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 05:40:32 Check angles 05:40:32 SkyScan query 05:40:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:40:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:40:33 Message to Master queued w/err=0: serial=106551 error=0 05:40:38 Received message from Master: op=Filter serial=106552 05:40:38 Color wheel filter change from 0 to 0 05:40:38 FLIGetFilterPos err=0 currentPosition=0 05:40:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:38 Filter is already there-color wheel unchanged 05:40:38 Received message from Master: op=Shutter serial=106553 05:40:38 Shutter LASER open 05:40:38 Received message from Camera: op=State serial=106555 05:40:38 GetSingleValue result=40 Value=cccccccc 05:40:38 SkyScan query 05:40:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:40:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:39 Parameters OK 05:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:39 Set A/D data flow result=40 05:40:39 Set A/D channel type result=40 05:40:39 Set A/D encoding result=40 05:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:39 Set channel filter=0.000000e+000 result=40 05:40:39 Config A/D Result=40 05:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:39 Get A/D filter: -9.255963e+061 result=40 05:40:39 Get A/D value=-858993460 result=40 05:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:39 Parameters OK 05:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:39 Set A/D data flow result=40 05:40:39 Set A/D channel type result=40 05:40:39 Set A/D encoding result=40 05:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:39 Set channel filter=0.000000e+000 result=40 05:40:39 Config A/D Result=40 05:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:39 Get A/D filter: -9.255963e+061 result=40 05:40:39 Get A/D value=-858993460 result=40 05:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:39 Aux= 05:40:39 Message to Camera, serial 106555 queued 05:40:47 Received message from Master: op=Shutter serial=106565 05:40:47 Shutter LASER close 05:40:48 Received message from Master: op=PointingHead serial=106569 05:40:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:40:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:40:48 Point started: ret=0 05:40:48 point_skyscan result=0 05:40:49 Check angles 05:40:49 SkyScan query 05:40:50 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.71<-21514 Statuses=0009 0009 05:40:50 Msec=0 True Az=136.365 Ze=-142.71 Az status=0009 Ze status=0009 05:40:50 Check angles 05:40:50 SkyScan query 05:40:50 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.83<-20122 Statuses=0009 0009 05:40:50 Msec=750 True Az=153.795 Ze=-121.83 Az status=0009 Ze status=0009 05:40:51 Check angles 05:40:51 SkyScan query 05:40:51 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.905<-18727 Statuses=0009 0009 05:40:51 Msec=1500 True Az=171.255 Ze=-100.905 Az status=0009 Ze status=0009 05:40:51 Check angles 05:40:51 SkyScan query 05:40:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.515<-17301 Statuses=0008 0009 05:40:52 Msec=2250 True Az=176.01 Ze=-79.515 Az status=0008 Ze status=0009 05:40:52 Check angles 05:40:52 SkyScan query 05:40:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.11<-15874 Statuses=0008 0009 05:40:53 Msec=3000 True Az=176.01 Ze=-58.11 Az status=0008 Ze status=0009 05:40:53 Check angles 05:40:53 SkyScan query 05:40:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 05:40:53 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 05:40:53 Message to Master queued w/err=0: serial=106569 error=0 05:40:58 Received message from Master: op=Filter serial=106570 05:40:58 Color wheel filter change from 0 to 0 05:40:58 FLIGetFilterPos err=0 currentPosition=0 05:40:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:58 Filter is already there-color wheel unchanged 05:40:59 Received message from Master: op=Shutter serial=106571 05:40:59 Shutter LASER close 05:40:59 Received message from Camera: op=State serial=106573 05:40:59 GetSingleValue result=40 Value=cccccccc 05:40:59 SkyScan query 05:40:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:40:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:59 Parameters OK 05:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:59 Set A/D data flow result=40 05:40:59 Set A/D channel type result=40 05:40:59 Set A/D encoding result=40 05:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:59 Set channel filter=0.000000e+000 result=40 05:40:59 Config A/D Result=40 05:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:59 Get A/D filter: -9.255963e+061 result=40 05:40:59 Get A/D value=-858993460 result=40 05:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:59 Parameters OK 05:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:59 Set A/D data flow result=40 05:40:59 Set A/D channel type result=40 05:40:59 Set A/D encoding result=40 05:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:59 Set channel filter=0.000000e+000 result=40 05:40:59 Config A/D Result=40 05:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:59 Get A/D filter: -9.255963e+061 result=40 05:40:59 Get A/D value=-858993460 result=40 05:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:59 Aux= 05:40:59 Message to Camera, serial 106573 queued 05:41:36 Received message from Master: op=PointingHead serial=106586 05:41:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:41:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:41:36 Point started: ret=0 05:41:36 point_skyscan result=0 05:41:37 Check angles 05:41:37 SkyScan query 05:41:38 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.66<-13444 Statuses=0009 0009 05:41:38 Msec=0 True Az=152.925 Ze=-21.66 Az status=0009 Ze status=0009 05:41:38 Check angles 05:41:38 SkyScan query 05:41:39 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.675<-12045 Statuses=0009 0009 05:41:39 Msec=750 True Az=135.42 Ze=-0.675 Az status=0009 Ze status=0009 05:41:39 Check angles 05:41:39 SkyScan query 05:41:39 SkyScan query done: ret=0 az=117.945<-7863 ze=20.265<-10649 Statuses=0009 0009 05:41:39 Msec=1500 True Az=117.945 Ze=20.265 Az status=0009 Ze status=0009 05:41:39 Check angles 05:41:39 SkyScan query 05:41:40 SkyScan query done: ret=0 az=100.56<-6704 ze=41.265<-9249 Statuses=0009 0009 05:41:40 Msec=2250 True Az=100.56 Ze=41.265 Az status=0009 Ze status=0009 05:41:40 Check angles 05:41:40 SkyScan query 05:41:41 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 05:41:41 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 05:41:41 Check angles 05:41:41 SkyScan query 05:41:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:41:42 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:41:42 Message to Master queued w/err=0: serial=106586 error=0 05:41:47 Received message from Master: op=Filter serial=106587 05:41:47 Color wheel filter change from 0 to 0 05:41:47 FLIGetFilterPos err=0 currentPosition=0 05:41:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:47 Filter is already there-color wheel unchanged 05:41:47 Received message from Master: op=Shutter serial=106588 05:41:47 Shutter LASER close 05:41:47 Received message from Camera: op=State serial=106590 05:41:47 GetSingleValue result=40 Value=cccccccc 05:41:47 SkyScan query 05:41:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:41:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:47 Parameters OK 05:41:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:47 Set A/D data flow result=40 05:41:47 Set A/D channel type result=40 05:41:47 Set A/D encoding result=40 05:41:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:47 Set channel filter=0.000000e+000 result=40 05:41:47 Config A/D Result=40 05:41:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:47 Get A/D filter: -9.255963e+061 result=40 05:41:47 Get A/D value=-858993460 result=40 05:41:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:47 Parameters OK 05:41:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:47 Set A/D data flow result=40 05:41:47 Set A/D channel type result=40 05:41:47 Set A/D encoding result=40 05:41:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:47 Set channel filter=0.000000e+000 result=40 05:41:47 Config A/D Result=40 05:41:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:47 Get A/D filter: -9.255963e+061 result=40 05:41:47 Get A/D value=-858993460 result=40 05:41:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:47 Aux= 05:41:47 Message to Camera, serial 106590 queued 05:42:24 Received message from Master: op=PointingHead serial=106603 05:42:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:42:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:42:25 Point started: ret=0 05:42:25 point_skyscan result=0 05:42:25 Check angles 05:42:25 SkyScan query 05:42:26 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 05:42:26 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 05:42:26 Check angles 05:42:26 SkyScan query 05:42:27 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 05:42:27 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 05:42:27 Check angles 05:42:27 SkyScan query 05:42:27 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 05:42:27 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 05:42:28 Check angles 05:42:28 SkyScan query 05:42:28 SkyScan query done: ret=0 az=161.91<-10794 ze=38.505<-9433 Statuses=0009 0008 05:42:28 Msec=2250 True Az=161.91 Ze=38.505 Az status=0009 Ze status=0008 05:42:28 Check angles 05:42:28 SkyScan query 05:42:29 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:42:29 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:42:29 Check angles 05:42:29 SkyScan query 05:42:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:42:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:42:30 Message to Master queued w/err=0: serial=106603 error=0 05:42:35 Received message from Master: op=Filter serial=106604 05:42:35 Color wheel filter change from 0 to 0 05:42:35 FLIGetFilterPos err=0 currentPosition=0 05:42:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:35 Filter is already there-color wheel unchanged 05:42:35 Received message from Master: op=Shutter serial=106605 05:42:35 Shutter LASER close 05:42:35 Received message from Camera: op=State serial=106607 05:42:35 GetSingleValue result=40 Value=cccccccc 05:42:35 SkyScan query 05:42:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:42:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:35 Parameters OK 05:42:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:35 Set A/D data flow result=40 05:42:35 Set A/D channel type result=40 05:42:35 Set A/D encoding result=40 05:42:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:35 Set channel filter=0.000000e+000 result=40 05:42:35 Config A/D Result=40 05:42:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:35 Get A/D filter: -9.255963e+061 result=40 05:42:35 Get A/D value=-858993460 result=40 05:42:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:35 Parameters OK 05:42:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:35 Set A/D data flow result=40 05:42:35 Set A/D channel type result=40 05:42:35 Set A/D encoding result=40 05:42:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:35 Set channel filter=0.000000e+000 result=40 05:42:35 Config A/D Result=40 05:42:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:35 Get A/D filter: -9.255963e+061 result=40 05:42:35 Get A/D value=-858993460 result=40 05:42:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:35 Aux= 05:42:35 Message to Camera, serial 106607 queued 05:43:12 Received message from Master: op=PointingHead serial=106620 05:43:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:43:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:43:13 Point started: ret=0 05:43:13 point_skyscan result=0 05:43:13 Check angles 05:43:13 SkyScan query 05:43:14 SkyScan query done: ret=0 az=152.685<-10179 ze=8.31<-11446 Statuses=0009 0009 05:43:14 Msec=0 True Az=152.685 Ze=8.31 Az status=0009 Ze status=0009 05:43:14 Check angles 05:43:14 SkyScan query 05:43:15 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.615<-12841 Statuses=0009 0009 05:43:15 Msec=750 True Az=135.165 Ze=-12.615 Az status=0009 Ze status=0009 05:43:15 Check angles 05:43:15 SkyScan query 05:43:15 SkyScan query done: ret=0 az=117.27<-7818 ze=-34.035<-14269 Statuses=0009 0009 05:43:15 Msec=1500 True Az=117.27 Ze=-34.035 Az status=0009 Ze status=0009 05:43:16 Check angles 05:43:16 SkyScan query 05:43:16 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.555<-15437 Statuses=0009 0009 05:43:16 Msec=2250 True Az=99.915 Ze=-51.555 Az status=0009 Ze status=0009 05:43:16 Check angles 05:43:16 SkyScan query 05:43:17 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 05:43:17 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 05:43:17 Check angles 05:43:17 SkyScan query 05:43:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:43:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:43:18 Message to Master queued w/err=0: serial=106620 error=0 05:43:23 Received message from Master: op=Filter serial=106621 05:43:23 Color wheel filter change from 0 to 0 05:43:23 FLIGetFilterPos err=0 currentPosition=0 05:43:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:23 Filter is already there-color wheel unchanged 05:43:23 Received message from Master: op=Shutter serial=106622 05:43:23 Shutter LASER close 05:43:23 Received message from Camera: op=State serial=106624 05:43:23 GetSingleValue result=40 Value=cccccccc 05:43:23 SkyScan query 05:43:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:43:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:24 Parameters OK 05:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:24 Set A/D data flow result=40 05:43:24 Set A/D channel type result=40 05:43:24 Set A/D encoding result=40 05:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:24 Set channel filter=0.000000e+000 result=40 05:43:24 Config A/D Result=40 05:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:24 Get A/D filter: -9.255963e+061 result=40 05:43:24 Get A/D value=-858993460 result=40 05:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:24 Parameters OK 05:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:24 Set A/D data flow result=40 05:43:24 Set A/D channel type result=40 05:43:24 Set A/D encoding result=40 05:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:24 Set channel filter=0.000000e+000 result=40 05:43:24 Config A/D Result=40 05:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:24 Get A/D filter: -9.255963e+061 result=40 05:43:24 Get A/D value=-858993460 result=40 05:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:24 Aux= 05:43:24 Message to Camera, serial 106624 queued 05:43:59 Received message from Master: op=PointingHead serial=106636 05:43:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:43:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:44:00 Point started: ret=0 05:44:00 point_skyscan result=0 05:44:01 Check angles 05:44:01 SkyScan query 05:44:01 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.36<-17424 Statuses=0009 0009 05:44:01 Msec=0 True Az=109.02 Ze=-81.36 Az status=0009 Ze status=0009 05:44:01 Check angles 05:44:01 SkyScan query 05:44:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.765<-18851 Statuses=0008 0009 05:44:02 Msec=750 True Az=112.995 Ze=-102.765 Az status=0008 Ze status=0009 05:44:02 Check angles 05:44:02 SkyScan query 05:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.185<-20279 Statuses=0008 0009 05:44:03 Msec=1500 True Az=112.995 Ze=-124.185 Az status=0008 Ze status=0009 05:44:03 Check angles 05:44:03 SkyScan query 05:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 05:44:03 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 05:44:04 Check angles 05:44:04 SkyScan query 05:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.485<-23099 Statuses=0008 0009 05:44:04 Msec=3000 True Az=112.995 Ze=-166.485 Az status=0008 Ze status=0009 05:44:04 Check angles 05:44:04 SkyScan query 05:44:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:44:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:44:05 Message to Master queued w/err=0: serial=106636 error=0 05:44:10 Received message from Master: op=Filter serial=106637 05:44:10 Color wheel filter change from 0 to 0 05:44:10 FLIGetFilterPos err=0 currentPosition=0 05:44:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:10 Filter is already there-color wheel unchanged 05:44:10 Received message from Master: op=Shutter serial=106638 05:44:10 Shutter LASER open 05:44:10 Received message from Camera: op=State serial=106640 05:44:10 GetSingleValue result=40 Value=cccccccc 05:44:10 SkyScan query 05:44:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:44:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:11 Parameters OK 05:44:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:11 Set A/D data flow result=40 05:44:11 Set A/D channel type result=40 05:44:11 Set A/D encoding result=40 05:44:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:11 Set channel filter=0.000000e+000 result=40 05:44:11 Config A/D Result=40 05:44:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:11 Get A/D filter: -9.255963e+061 result=40 05:44:11 Get A/D value=-858993460 result=40 05:44:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:11 Parameters OK 05:44:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:11 Set A/D data flow result=40 05:44:11 Set A/D channel type result=40 05:44:11 Set A/D encoding result=40 05:44:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:11 Set channel filter=0.000000e+000 result=40 05:44:11 Config A/D Result=40 05:44:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:11 Get A/D filter: -9.255963e+061 result=40 05:44:11 Get A/D value=-858993460 result=40 05:44:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:11 Aux= 05:44:11 Message to Camera, serial 106640 queued 05:44:19 Received message from Master: op=Shutter serial=106650 05:44:19 Shutter LASER close 05:44:20 Received message from Master: op=PointingHead serial=106654 05:44:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:44:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:44:20 Point started: ret=0 05:44:20 point_skyscan result=0 05:44:21 Check angles 05:44:21 SkyScan query 05:44:21 SkyScan query done: ret=0 az=89.895<-5993 ze=157.29<-1514 Statuses=0009 0009 05:44:21 Msec=0 True Az=89.895 Ze=157.29 Az status=0009 Ze status=0009 05:44:22 Check angles 05:44:22 SkyScan query 05:44:22 SkyScan query done: ret=0 az=72.345<-4823 ze=136.29<-2914 Statuses=0009 0009 05:44:22 Msec=750 True Az=72.345 Ze=136.29 Az status=0009 Ze status=0009 05:44:22 Check angles 05:44:22 SkyScan query 05:44:23 SkyScan query done: ret=0 az=54.675<-3645 ze=114.945<-4337 Statuses=0009 0009 05:44:23 Msec=1500 True Az=54.675 Ze=114.945 Az status=0009 Ze status=0009 05:44:23 Check angles 05:44:23 SkyScan query 05:44:24 SkyScan query done: ret=0 az=40.875<-2725 ze=93.9<-5740 Statuses=0009 0009 05:44:24 Msec=2250 True Az=40.875 Ze=93.9 Az status=0009 Ze status=0009 05:44:24 Check angles 05:44:24 SkyScan query 05:44:24 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 05:44:24 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 05:44:25 Check angles 05:44:25 SkyScan query 05:44:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 05:44:25 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 05:44:25 Check angles 05:44:25 SkyScan query 05:44:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:44:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:44:26 Message to Master queued w/err=0: serial=106654 error=0 05:44:31 Received message from Master: op=Filter serial=106655 05:44:31 Color wheel filter change from 0 to 0 05:44:31 FLIGetFilterPos err=0 currentPosition=0 05:44:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:31 Filter is already there-color wheel unchanged 05:44:31 Received message from Master: op=Shutter serial=106656 05:44:31 Shutter LASER close 05:44:31 Received message from Camera: op=State serial=106658 05:44:31 GetSingleValue result=40 Value=cccccccc 05:44:31 SkyScan query 05:44:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:44:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:32 Parameters OK 05:44:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:32 Set A/D data flow result=40 05:44:32 Set A/D channel type result=40 05:44:32 Set A/D encoding result=40 05:44:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:32 Set channel filter=0.000000e+000 result=40 05:44:32 Config A/D Result=40 05:44:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:32 Get A/D filter: -9.255963e+061 result=40 05:44:32 Get A/D value=-858993460 result=40 05:44:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:32 Parameters OK 05:44:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:32 Set A/D data flow result=40 05:44:32 Set A/D channel type result=40 05:44:32 Set A/D encoding result=40 05:44:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:32 Set channel filter=0.000000e+000 result=40 05:44:32 Config A/D Result=40 05:44:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:32 Get A/D filter: -9.255963e+061 result=40 05:44:32 Get A/D value=-858993460 result=40 05:44:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:32 Aux= 05:44:32 Message to Camera, serial 106658 queued 05:45:08 Received message from Master: op=PointingHead serial=106670 05:45:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:45:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:45:08 Point started: ret=0 05:45:08 point_skyscan result=0 05:45:09 Check angles 05:45:09 SkyScan query 05:45:09 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 05:45:09 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 05:45:10 Check angles 05:45:10 SkyScan query 05:45:10 SkyScan query done: ret=0 az=81.765<-5451 ze=66.51<-7566 Statuses=0009 0008 05:45:10 Msec=750 True Az=81.765 Ze=66.51 Az status=0009 Ze status=0008 05:45:10 Check angles 05:45:10 SkyScan query 05:45:11 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 05:45:11 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 05:45:11 Check angles 05:45:11 SkyScan query 05:45:12 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 05:45:12 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 05:45:12 Check angles 05:45:12 SkyScan query 05:45:12 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 05:45:12 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 05:45:13 Check angles 05:45:13 SkyScan query 05:45:13 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 05:45:13 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 05:45:13 Check angles 05:45:13 SkyScan query 05:45:14 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:45:14 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:45:14 Message to Master queued w/err=0: serial=106670 error=0 05:45:19 Received message from Master: op=Filter serial=106671 05:45:19 Color wheel filter change from 0 to 0 05:45:19 FLIGetFilterPos err=0 currentPosition=0 05:45:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:19 Filter is already there-color wheel unchanged 05:45:19 Received message from Master: op=Shutter serial=106672 05:45:19 Shutter LASER close 05:45:19 Received message from Camera: op=State serial=106674 05:45:19 GetSingleValue result=40 Value=cccccccc 05:45:19 SkyScan query 05:45:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:45:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:20 Parameters OK 05:45:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:20 Set A/D data flow result=40 05:45:20 Set A/D channel type result=40 05:45:20 Set A/D encoding result=40 05:45:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:20 Set channel filter=0.000000e+000 result=40 05:45:20 Config A/D Result=40 05:45:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:20 Get A/D filter: -9.255963e+061 result=40 05:45:20 Get A/D value=-858993460 result=40 05:45:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:20 Parameters OK 05:45:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:20 Set A/D data flow result=40 05:45:20 Set A/D channel type result=40 05:45:20 Set A/D encoding result=40 05:45:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:20 Set channel filter=0.000000e+000 result=40 05:45:20 Config A/D Result=40 05:45:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:20 Get A/D filter: -9.255963e+061 result=40 05:45:20 Get A/D value=-858993460 result=40 [UTC 2018-12-13 05:45:20] 05:45:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:20 Aux= 05:45:20 Message to Camera, serial 106674 queued 05:45:27 Received message from Master: op=Identify serial=106675 05:45:57 Received message from Master: op=PointingHead serial=106690 05:45:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:45:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:45:57 Point started: ret=0 05:45:57 point_skyscan result=0 05:45:58 Check angles 05:45:58 SkyScan query 05:45:58 SkyScan query done: ret=0 az=134.625<-8975 ze=36.285<-9581 Statuses=0009 0009 05:45:58 Msec=0 True Az=134.625 Ze=36.285 Az status=0009 Ze status=0009 05:45:58 Check angles 05:45:58 SkyScan query 05:45:59 SkyScan query done: ret=0 az=117.165<-7811 ze=15.375<-10975 Statuses=0009 0009 05:45:59 Msec=750 True Az=117.165 Ze=15.375 Az status=0009 Ze status=0009 05:45:59 Check angles 05:45:59 SkyScan query 05:46:00 SkyScan query done: ret=0 az=99.27<-6618 ze=-6.03<-12402 Statuses=0009 0009 05:46:00 Msec=1500 True Az=99.27 Ze=-6.03 Az status=0009 Ze status=0009 05:46:00 Check angles 05:46:00 SkyScan query 05:46:01 SkyScan query done: ret=0 az=81.915<-5461 ze=-27.015<-13801 Statuses=0009 0009 05:46:01 Msec=2250 True Az=81.915 Ze=-27.015 Az status=0009 Ze status=0009 05:46:01 Check angles 05:46:01 SkyScan query 05:46:01 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.565<-14571 Statuses=0009 0008 05:46:01 Msec=3000 True Az=64.44 Ze=-38.565 Az status=0009 Ze status=0008 05:46:01 Check angles 05:46:01 SkyScan query 05:46:02 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.535<-14569 Statuses=0009 0008 05:46:02 Msec=3750 True Az=46.98 Ze=-38.535 Az status=0009 Ze status=0008 05:46:02 Check angles 05:46:02 SkyScan query 05:46:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:46:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:46:03 Message to Master queued w/err=0: serial=106690 error=0 05:46:08 Received message from Master: op=Filter serial=106691 05:46:08 Color wheel filter change from 0 to 0 05:46:08 FLIGetFilterPos err=0 currentPosition=0 05:46:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:08 Filter is already there-color wheel unchanged 05:46:08 Received message from Master: op=Shutter serial=106692 05:46:08 Shutter LASER close 05:46:08 Received message from Camera: op=State serial=106694 05:46:08 GetSingleValue result=40 Value=cccccccc 05:46:08 SkyScan query 05:46:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:46:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:09 Parameters OK 05:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:09 Set A/D data flow result=40 05:46:09 Set A/D channel type result=40 05:46:09 Set A/D encoding result=40 05:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:09 Set channel filter=0.000000e+000 result=40 05:46:09 Config A/D Result=40 05:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:09 Get A/D filter: -9.255963e+061 result=40 05:46:09 Get A/D value=-858993460 result=40 05:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:09 Parameters OK 05:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:09 Set A/D data flow result=40 05:46:09 Set A/D channel type result=40 05:46:09 Set A/D encoding result=40 05:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:09 Set channel filter=0.000000e+000 result=40 05:46:09 Config A/D Result=40 05:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:09 Get A/D filter: -9.255963e+061 result=40 05:46:09 Get A/D value=-858993460 result=40 05:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:09 Aux= 05:46:09 Message to Camera, serial 106694 queued 05:46:45 Received message from Master: op=PointingHead serial=106707 05:46:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:46:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:46:46 Point started: ret=0 05:46:46 point_skyscan result=0 05:46:47 Check angles 05:46:47 SkyScan query 05:46:47 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.28<-16552 Statuses=0009 0009 05:46:47 Msec=0 True Az=64.005 Ze=-68.28 Az status=0009 Ze status=0009 05:46:47 Check angles 05:46:47 SkyScan query 05:46:48 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.715<-17981 Statuses=0009 0009 05:46:48 Msec=750 True Az=81.765 Ze=-89.715 Az status=0009 Ze status=0009 05:46:48 Check angles 05:46:48 SkyScan query 05:46:49 SkyScan query done: ret=0 az=99.825<-6655 ze=-111.105<-19407 Statuses=0009 0009 05:46:49 Msec=1500 True Az=99.825 Ze=-111.105 Az status=0009 Ze status=0009 05:46:49 Check angles 05:46:49 SkyScan query 05:46:49 SkyScan query done: ret=0 az=117.345<-7823 ze=-132.03<-20802 Statuses=0009 0009 05:46:49 Msec=2250 True Az=117.345 Ze=-132.03 Az status=0009 Ze status=0009 05:46:50 Check angles 05:46:50 SkyScan query 05:46:50 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 05:46:50 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 05:46:50 Check angles 05:46:50 SkyScan query 05:46:51 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:46:51 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:46:51 Message to Master queued w/err=0: serial=106707 error=0 05:46:56 Received message from Master: op=Filter serial=106708 05:46:56 Color wheel filter change from 0 to 0 05:46:56 FLIGetFilterPos err=0 currentPosition=0 05:46:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:56 Filter is already there-color wheel unchanged 05:46:56 Received message from Master: op=Shutter serial=106709 05:46:56 Shutter LASER close 05:46:56 Received message from Camera: op=State serial=106711 05:46:56 GetSingleValue result=40 Value=cccccccc 05:46:56 SkyScan query 05:46:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:46:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:57 Parameters OK 05:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:57 Set A/D data flow result=40 05:46:57 Set A/D channel type result=40 05:46:57 Set A/D encoding result=40 05:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:57 Set channel filter=0.000000e+000 result=40 05:46:57 Config A/D Result=40 05:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:57 Get A/D filter: -9.255963e+061 result=40 05:46:57 Get A/D value=-858993460 result=40 05:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:57 Parameters OK 05:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:57 Set A/D data flow result=40 05:46:57 Set A/D channel type result=40 05:46:57 Set A/D encoding result=40 05:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:57 Set channel filter=0.000000e+000 result=40 05:46:57 Config A/D Result=40 05:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:57 Get A/D filter: -9.255963e+061 result=40 05:46:57 Get A/D value=-858993460 result=40 05:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:57 Aux= 05:46:57 Message to Camera, serial 106711 queued 05:47:34 Received message from Master: op=PointingHead serial=106724 05:47:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:47:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:47:34 Point started: ret=0 05:47:34 point_skyscan result=0 05:47:35 Check angles 05:47:35 SkyScan query 05:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0009 0009 05:47:35 Msec=0 True Az=112.995 Ze=-171.3 Az status=0009 Ze status=0009 05:47:35 Check angles 05:47:35 SkyScan query 05:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:47:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:47:36 Message to Master queued w/err=0: serial=106724 error=0 05:47:41 Received message from Master: op=Filter serial=106725 05:47:41 Color wheel filter change from 0 to 0 05:47:41 FLIGetFilterPos err=0 currentPosition=0 05:47:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:41 Filter is already there-color wheel unchanged 05:47:41 Received message from Master: op=Shutter serial=106726 05:47:41 Shutter LASER open 05:47:41 Received message from Camera: op=State serial=106728 05:47:41 GetSingleValue result=40 Value=cccccccc 05:47:41 SkyScan query 05:47:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:47:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:42 Parameters OK 05:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:42 Set A/D data flow result=40 05:47:42 Set A/D channel type result=40 05:47:42 Set A/D encoding result=40 05:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:42 Set channel filter=0.000000e+000 result=40 05:47:42 Config A/D Result=40 05:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:42 Get A/D filter: -9.255963e+061 result=40 05:47:42 Get A/D value=-858993460 result=40 05:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:42 Parameters OK 05:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:42 Set A/D data flow result=40 05:47:42 Set A/D channel type result=40 05:47:42 Set A/D encoding result=40 05:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:42 Set channel filter=0.000000e+000 result=40 05:47:42 Config A/D Result=40 05:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:42 Get A/D filter: -9.255963e+061 result=40 05:47:42 Get A/D value=-858993460 result=40 05:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:42 Aux= 05:47:42 Message to Camera, serial 106728 queued 05:47:50 Received message from Master: op=Shutter serial=106738 05:47:50 Shutter LASER close 05:47:51 Received message from Master: op=PointingHead serial=106742 05:47:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:47:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:47:51 Point started: ret=0 05:47:51 point_skyscan result=0 05:47:52 Check angles 05:47:52 SkyScan query 05:47:53 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.755<-21517 Statuses=0009 0009 05:47:53 Msec=0 True Az=136.365 Ze=-142.755 Az status=0009 Ze status=0009 05:47:53 Check angles 05:47:53 SkyScan query 05:47:53 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.8<-20120 Statuses=0009 0009 05:47:53 Msec=750 True Az=153.87 Ze=-121.8 Az status=0009 Ze status=0009 05:47:54 Check angles 05:47:54 SkyScan query 05:47:54 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.815<-18721 Statuses=0009 0009 05:47:54 Msec=1500 True Az=171.42 Ze=-100.815 Az status=0009 Ze status=0009 05:47:54 Check angles 05:47:54 SkyScan query 05:47:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.935<-17329 Statuses=0008 0009 05:47:55 Msec=2250 True Az=176.01 Ze=-79.935 Az status=0008 Ze status=0009 05:47:55 Check angles 05:47:55 SkyScan query 05:47:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 05:47:56 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 05:47:56 Check angles 05:47:56 SkyScan query 05:47:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 05:47:56 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 05:47:56 Message to Master queued w/err=0: serial=106742 error=0 05:48:01 Received message from Master: op=Filter serial=106743 05:48:01 Color wheel filter change from 0 to 0 05:48:01 FLIGetFilterPos err=0 currentPosition=0 05:48:01 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:01 Filter is already there-color wheel unchanged 05:48:02 Received message from Master: op=Shutter serial=106744 05:48:02 Shutter LASER close 05:48:02 Received message from Camera: op=State serial=106746 05:48:02 GetSingleValue result=40 Value=cccccccc 05:48:02 SkyScan query 05:48:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:48:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:02 Parameters OK 05:48:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:02 Set A/D data flow result=40 05:48:02 Set A/D channel type result=40 05:48:02 Set A/D encoding result=40 05:48:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:02 Set channel filter=0.000000e+000 result=40 05:48:02 Config A/D Result=40 05:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:02 Get A/D filter: -9.255963e+061 result=40 05:48:02 Get A/D value=-858993460 result=40 05:48:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:02 Parameters OK 05:48:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:02 Set A/D data flow result=40 05:48:02 Set A/D channel type result=40 05:48:02 Set A/D encoding result=40 05:48:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:02 Set channel filter=0.000000e+000 result=40 05:48:02 Config A/D Result=40 05:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:02 Get A/D filter: -9.255963e+061 result=40 05:48:02 Get A/D value=-858993460 result=40 05:48:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:02 Aux= 05:48:02 Message to Camera, serial 106746 queued 05:48:39 Received message from Master: op=PointingHead serial=106759 05:48:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:48:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:48:40 Point started: ret=0 05:48:40 point_skyscan result=0 05:48:40 Check angles 05:48:40 SkyScan query 05:48:41 SkyScan query done: ret=0 az=153<-10200 ze=-21.93<-13462 Statuses=0009 0009 05:48:41 Msec=0 True Az=153 Ze=-21.93 Az status=0009 Ze status=0009 05:48:41 Check angles 05:48:41 SkyScan query 05:48:42 SkyScan query done: ret=0 az=135.645<-9043 ze=-0.93<-12062 Statuses=0009 0009 05:48:42 Msec=750 True Az=135.645 Ze=-0.93 Az status=0009 Ze status=0009 05:48:42 Check angles 05:48:42 SkyScan query 05:48:42 SkyScan query done: ret=0 az=118.08<-7872 ze=20.01<-10666 Statuses=0009 0009 05:48:42 Msec=1500 True Az=118.08 Ze=20.01 Az status=0009 Ze status=0009 05:48:43 Check angles 05:48:43 SkyScan query 05:48:43 SkyScan query done: ret=0 az=100.68<-6712 ze=40.995<-9267 Statuses=0009 0009 05:48:43 Msec=2250 True Az=100.68 Ze=40.995 Az status=0009 Ze status=0009 05:48:43 Check angles 05:48:43 SkyScan query 05:48:44 SkyScan query done: ret=0 az=86.01<-5734 ze=51.525<-8565 Statuses=0009 0008 05:48:44 Msec=3000 True Az=86.01 Ze=51.525 Az status=0009 Ze status=0008 05:48:44 Check angles 05:48:44 SkyScan query 05:48:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:48:45 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:48:45 Message to Master queued w/err=0: serial=106759 error=0 05:48:50 Received message from Master: op=Filter serial=106760 05:48:50 Color wheel filter change from 0 to 0 05:48:50 FLIGetFilterPos err=0 currentPosition=0 05:48:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:50 Filter is already there-color wheel unchanged 05:48:50 Received message from Master: op=Shutter serial=106761 05:48:50 Shutter LASER close 05:48:50 Received message from Camera: op=State serial=106763 05:48:50 GetSingleValue result=40 Value=cccccccc 05:48:50 SkyScan query 05:48:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 05:48:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:50 Parameters OK 05:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:50 Set A/D data flow result=40 05:48:50 Set A/D channel type result=40 05:48:50 Set A/D encoding result=40 05:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:50 Set channel filter=0.000000e+000 result=40 05:48:50 Config A/D Result=40 05:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:50 Get A/D filter: -9.255963e+061 result=40 05:48:50 Get A/D value=-858993460 result=40 05:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:50 Parameters OK 05:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:50 Set A/D data flow result=40 05:48:50 Set A/D channel type result=40 05:48:50 Set A/D encoding result=40 05:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:50 Set channel filter=0.000000e+000 result=40 05:48:50 Config A/D Result=40 05:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:50 Get A/D filter: -9.255963e+061 result=40 05:48:50 Get A/D value=-858993460 result=40 05:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:50 Aux= 05:48:50 Message to Camera, serial 106763 queued 05:49:27 Received message from Master: op=PointingHead serial=106776 05:49:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:49:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:49:28 Point started: ret=0 05:49:28 point_skyscan result=0 05:49:28 Check angles 05:49:28 SkyScan query 05:49:29 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 05:49:29 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 05:49:29 Check angles 05:49:29 SkyScan query 05:49:30 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 05:49:30 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 05:49:30 Check angles 05:49:30 SkyScan query 05:49:30 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 05:49:30 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 05:49:31 Check angles 05:49:31 SkyScan query 05:49:31 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 05:49:31 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 05:49:31 Check angles 05:49:31 SkyScan query 05:49:32 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:49:32 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:49:32 Check angles 05:49:32 SkyScan query 05:49:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:49:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:49:33 Message to Master queued w/err=0: serial=106776 error=0 05:49:38 Received message from Master: op=Filter serial=106777 05:49:38 Color wheel filter change from 0 to 0 05:49:38 FLIGetFilterPos err=0 currentPosition=0 05:49:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:38 Filter is already there-color wheel unchanged 05:49:38 Received message from Master: op=Shutter serial=106778 05:49:38 Shutter LASER close 05:49:38 Received message from Camera: op=State serial=106780 05:49:38 GetSingleValue result=40 Value=cccccccc 05:49:38 SkyScan query 05:49:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:49:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:38 Parameters OK 05:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:38 Set A/D data flow result=40 05:49:38 Set A/D channel type result=40 05:49:38 Set A/D encoding result=40 05:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:38 Set channel filter=0.000000e+000 result=40 05:49:38 Config A/D Result=40 05:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:38 Get A/D filter: -9.255963e+061 result=40 05:49:38 Get A/D value=-858993460 result=40 05:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:38 Parameters OK 05:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:38 Set A/D data flow result=40 05:49:38 Set A/D channel type result=40 05:49:38 Set A/D encoding result=40 05:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:38 Set channel filter=0.000000e+000 result=40 05:49:38 Config A/D Result=40 05:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:38 Get A/D filter: -9.255963e+061 result=40 05:49:38 Get A/D value=-858993460 result=40 05:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:38 Aux= 05:49:38 Message to Camera, serial 106780 queued 05:50:15 Received message from Master: op=PointingHead serial=106793 05:50:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:50:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:50:16 Point started: ret=0 05:50:16 point_skyscan result=0 05:50:16 Check angles 05:50:16 SkyScan query 05:50:17 SkyScan query done: ret=0 az=152.94<-10196 ze=8.82<-11412 Statuses=0009 0009 05:50:17 Msec=0 True Az=152.94 Ze=8.82 Az status=0009 Ze status=0009 05:50:17 Check angles 05:50:17 SkyScan query 05:50:18 SkyScan query done: ret=0 az=135.54<-9036 ze=-12.165<-12811 Statuses=0009 0009 05:50:18 Msec=750 True Az=135.54 Ze=-12.165 Az status=0009 Ze status=0009 05:50:18 Check angles 05:50:18 SkyScan query 05:50:18 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.06<-14204 Statuses=0009 0009 05:50:18 Msec=1500 True Az=118.02 Ze=-33.06 Az status=0009 Ze status=0009 05:50:19 Check angles 05:50:19 SkyScan query 05:50:19 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.555<-15437 Statuses=0009 0009 05:50:19 Msec=2250 True Az=100.29 Ze=-51.555 Az status=0009 Ze status=0009 05:50:19 Check angles 05:50:19 SkyScan query 05:50:20 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:50:20 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:50:20 Check angles 05:50:20 SkyScan query 05:50:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:50:21 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:50:21 Message to Master queued w/err=0: serial=106793 error=0 05:50:26 Received message from Master: op=Filter serial=106794 05:50:26 Color wheel filter change from 0 to 0 05:50:26 FLIGetFilterPos err=0 currentPosition=0 05:50:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:26 Filter is already there-color wheel unchanged 05:50:26 Received message from Master: op=Shutter serial=106795 05:50:26 Shutter LASER close 05:50:26 Received message from Camera: op=State serial=106797 05:50:26 GetSingleValue result=40 Value=cccccccc 05:50:26 SkyScan query 05:50:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:50:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:27 Parameters OK 05:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:27 Set A/D data flow result=40 05:50:27 Set A/D channel type result=40 05:50:27 Set A/D encoding result=40 05:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:27 Set channel filter=0.000000e+000 result=40 05:50:27 Config A/D Result=40 05:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:27 Get A/D filter: -9.255963e+061 result=40 05:50:27 Get A/D value=-858993460 result=40 05:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:27 Parameters OK 05:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:27 Set A/D data flow result=40 05:50:27 Set A/D channel type result=40 05:50:27 Set A/D encoding result=40 05:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:27 Set channel filter=0.000000e+000 result=40 05:50:27 Config A/D Result=40 05:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:27 Get A/D filter: -9.255963e+061 result=40 05:50:27 Get A/D value=-858993460 result=40 05:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:27 Aux= 05:50:27 Message to Camera, serial 106797 queued 05:51:03 Received message from Master: op=PointingHead serial=106810 05:51:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:51:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:51:04 Point started: ret=0 05:51:04 point_skyscan result=0 05:51:05 Check angles 05:51:05 SkyScan query 05:51:05 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.315<-17421 Statuses=0009 0009 05:51:05 Msec=0 True Az=108.99 Ze=-81.315 Az status=0009 Ze status=0009 05:51:05 Check angles 05:51:05 SkyScan query 05:51:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 05:51:06 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 05:51:06 Check angles 05:51:06 SkyScan query 05:51:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 05:51:07 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 05:51:07 Check angles 05:51:07 SkyScan query 05:51:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 05:51:07 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 05:51:08 Check angles 05:51:08 SkyScan query 05:51:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 05:51:08 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 05:51:08 Check angles 05:51:08 SkyScan query 05:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:51:09 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:51:09 Message to Master queued w/err=0: serial=106810 error=0 05:51:14 Received message from Master: op=Filter serial=106811 05:51:14 Color wheel filter change from 0 to 0 05:51:14 FLIGetFilterPos err=0 currentPosition=0 05:51:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:14 Filter is already there-color wheel unchanged 05:51:14 Received message from Master: op=Shutter serial=106812 05:51:14 Shutter LASER open 05:51:14 Received message from Camera: op=State serial=106814 05:51:14 GetSingleValue result=40 Value=cccccccc 05:51:14 SkyScan query 05:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:51:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:15 Parameters OK 05:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:15 Set A/D data flow result=40 05:51:15 Set A/D channel type result=40 05:51:15 Set A/D encoding result=40 05:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:15 Set channel filter=0.000000e+000 result=40 05:51:15 Config A/D Result=40 05:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:15 Get A/D filter: -9.255963e+061 result=40 05:51:15 Get A/D value=-858993460 result=40 05:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:15 Parameters OK 05:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:15 Set A/D data flow result=40 05:51:15 Set A/D channel type result=40 05:51:15 Set A/D encoding result=40 05:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:15 Set channel filter=0.000000e+000 result=40 05:51:15 Config A/D Result=40 05:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:15 Get A/D filter: -9.255963e+061 result=40 05:51:15 Get A/D value=-858993460 result=40 05:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:15 Aux= 05:51:15 Message to Camera, serial 106814 queued 05:51:23 Received message from Master: op=Shutter serial=106824 05:51:23 Shutter LASER close 05:51:24 Received message from Master: op=PointingHead serial=106828 05:51:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:51:24 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:51:24 Point started: ret=0 05:51:24 point_skyscan result=0 05:51:25 Check angles 05:51:25 SkyScan query 05:51:25 SkyScan query done: ret=0 az=90.18<-6012 ze=157.56<-1496 Statuses=0009 0009 05:51:25 Msec=0 True Az=90.18 Ze=157.56 Az status=0009 Ze status=0009 05:51:26 Check angles 05:51:26 SkyScan query 05:51:26 SkyScan query done: ret=0 az=72.78<-4852 ze=136.56<-2896 Statuses=0009 0009 05:51:26 Msec=750 True Az=72.78 Ze=136.56 Az status=0009 Ze status=0009 05:51:26 Check angles 05:51:26 SkyScan query 05:51:27 SkyScan query done: ret=0 az=55.185<-3679 ze=115.665<-4289 Statuses=0009 0009 05:51:27 Msec=1500 True Az=55.185 Ze=115.665 Az status=0009 Ze status=0009 05:51:27 Check angles 05:51:27 SkyScan query 05:51:28 SkyScan query done: ret=0 az=40.86<-2724 ze=94.2<-5720 Statuses=0009 0009 05:51:28 Msec=2250 True Az=40.86 Ze=94.2 Az status=0009 Ze status=0009 05:51:28 Check angles 05:51:28 SkyScan query 05:51:28 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 05:51:28 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 05:51:29 Check angles 05:51:29 SkyScan query 05:51:29 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 05:51:29 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 05:51:29 Check angles 05:51:29 SkyScan query 05:51:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:51:30 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:51:30 Message to Master queued w/err=0: serial=106828 error=0 05:51:35 Received message from Master: op=Filter serial=106829 05:51:35 Color wheel filter change from 0 to 0 05:51:35 FLIGetFilterPos err=0 currentPosition=0 05:51:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:35 Filter is already there-color wheel unchanged 05:51:35 Received message from Master: op=Shutter serial=106830 05:51:35 Shutter LASER close 05:51:35 Received message from Camera: op=State serial=106832 05:51:35 GetSingleValue result=40 Value=cccccccc 05:51:35 SkyScan query 05:51:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:51:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:36 Parameters OK 05:51:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:36 Set A/D data flow result=40 05:51:36 Set A/D channel type result=40 05:51:36 Set A/D encoding result=40 05:51:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:36 Set channel filter=0.000000e+000 result=40 05:51:36 Config A/D Result=40 05:51:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:36 Get A/D filter: -9.255963e+061 result=40 05:51:36 Get A/D value=-858993460 result=40 05:51:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:36 Parameters OK 05:51:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:36 Set A/D data flow result=40 05:51:36 Set A/D channel type result=40 05:51:36 Set A/D encoding result=40 05:51:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:36 Set channel filter=0.000000e+000 result=40 05:51:36 Config A/D Result=40 05:51:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:36 Get A/D filter: -9.255963e+061 result=40 05:51:36 Get A/D value=-858993460 result=40 05:51:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:36 Aux= 05:51:36 Message to Camera, serial 106832 queued 05:52:13 Received message from Master: op=PointingHead serial=106845 05:52:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:52:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:52:13 Point started: ret=0 05:52:13 point_skyscan result=0 05:52:14 Check angles 05:52:14 SkyScan query 05:52:14 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 05:52:14 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 05:52:14 Check angles 05:52:14 SkyScan query 05:52:15 SkyScan query done: ret=0 az=81.06<-5404 ze=66.495<-7567 Statuses=0009 0008 05:52:15 Msec=750 True Az=81.06 Ze=66.495 Az status=0009 Ze status=0008 05:52:15 Check angles 05:52:15 SkyScan query 05:52:16 SkyScan query done: ret=0 az=98.61<-6574 ze=66.495<-7567 Statuses=0009 0008 05:52:16 Msec=1500 True Az=98.61 Ze=66.495 Az status=0009 Ze status=0008 05:52:16 Check angles 05:52:16 SkyScan query 05:52:17 SkyScan query done: ret=0 az=116.16<-7744 ze=66.495<-7567 Statuses=0009 0008 05:52:17 Msec=2250 True Az=116.16 Ze=66.495 Az status=0009 Ze status=0008 05:52:17 Check angles 05:52:17 SkyScan query 05:52:17 SkyScan query done: ret=0 az=133.65<-8910 ze=66.495<-7567 Statuses=0009 0008 05:52:17 Msec=3000 True Az=133.65 Ze=66.495 Az status=0009 Ze status=0008 05:52:17 Check angles 05:52:17 SkyScan query 05:52:18 SkyScan query done: ret=0 az=151.02<-10068 ze=66.495<-7567 Statuses=0009 0008 05:52:18 Msec=3750 True Az=151.02 Ze=66.495 Az status=0009 Ze status=0008 05:52:18 Check angles 05:52:18 SkyScan query 05:52:19 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:52:19 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:52:19 Message to Master queued w/err=0: serial=106845 error=0 05:52:24 Received message from Master: op=Filter serial=106846 05:52:24 Color wheel filter change from 0 to 0 05:52:24 FLIGetFilterPos err=0 currentPosition=0 05:52:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:24 Filter is already there-color wheel unchanged 05:52:24 Received message from Master: op=Shutter serial=106847 05:52:24 Shutter LASER close 05:52:24 Received message from Camera: op=State serial=106849 05:52:24 GetSingleValue result=40 Value=cccccccc 05:52:24 SkyScan query 05:52:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:52:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:25 Parameters OK 05:52:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:25 Set A/D data flow result=40 05:52:25 Set A/D channel type result=40 05:52:25 Set A/D encoding result=40 05:52:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:25 Set channel filter=0.000000e+000 result=40 05:52:25 Config A/D Result=40 05:52:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:25 Get A/D filter: -9.255963e+061 result=40 05:52:25 Get A/D value=-858993460 result=40 05:52:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:25 Parameters OK 05:52:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:25 Set A/D data flow result=40 05:52:25 Set A/D channel type result=40 05:52:25 Set A/D encoding result=40 05:52:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:25 Set channel filter=0.000000e+000 result=40 05:52:25 Config A/D Result=40 05:52:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:25 Get A/D filter: -9.255963e+061 result=40 05:52:25 Get A/D value=-858993460 result=40 05:52:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:25 Aux= 05:52:25 Message to Camera, serial 106849 queued 05:53:02 Received message from Master: op=PointingHead serial=106862 05:53:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:53:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:53:02 Point started: ret=0 05:53:02 point_skyscan result=0 05:53:03 Check angles 05:53:03 SkyScan query 05:53:03 SkyScan query done: ret=0 az=134.61<-8974 ze=36.285<-9581 Statuses=0009 0009 05:53:03 Msec=0 True Az=134.61 Ze=36.285 Az status=0009 Ze status=0009 05:53:03 Check angles 05:53:03 SkyScan query 05:53:04 SkyScan query done: ret=0 az=116.7<-7780 ze=14.895<-11007 Statuses=0009 0009 05:53:04 Msec=750 True Az=116.7 Ze=14.895 Az status=0009 Ze status=0009 05:53:04 Check angles 05:53:04 SkyScan query 05:53:05 SkyScan query done: ret=0 az=99.405<-6627 ze=-6.045<-12403 Statuses=0009 0009 05:53:05 Msec=1500 True Az=99.405 Ze=-6.045 Az status=0009 Ze status=0009 05:53:05 Check angles 05:53:05 SkyScan query 05:53:05 SkyScan query done: ret=0 az=81.9<-5460 ze=-27.015<-13801 Statuses=0009 0009 05:53:05 Msec=2250 True Az=81.9 Ze=-27.015 Az status=0009 Ze status=0009 05:53:06 Check angles 05:53:06 SkyScan query 05:53:06 SkyScan query done: ret=0 az=64.305<-4287 ze=-38.58<-14572 Statuses=0009 0008 05:53:06 Msec=3000 True Az=64.305 Ze=-38.58 Az status=0009 Ze status=0008 05:53:06 Check angles 05:53:06 SkyScan query 05:53:07 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.52<-14568 Statuses=0009 0008 05:53:07 Msec=3750 True Az=47.025 Ze=-38.52 Az status=0009 Ze status=0008 05:53:07 Check angles 05:53:07 SkyScan query 05:53:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:53:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:53:08 Message to Master queued w/err=0: serial=106862 error=0 05:53:13 Received message from Master: op=Filter serial=106863 05:53:13 Color wheel filter change from 0 to 0 05:53:13 FLIGetFilterPos err=0 currentPosition=0 05:53:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:13 Filter is already there-color wheel unchanged 05:53:13 Received message from Master: op=Shutter serial=106864 05:53:13 Shutter LASER close 05:53:13 Received message from Camera: op=State serial=106866 05:53:13 GetSingleValue result=40 Value=cccccccc 05:53:13 SkyScan query 05:53:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:53:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:14 Parameters OK 05:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:14 Set A/D data flow result=40 05:53:14 Set A/D channel type result=40 05:53:14 Set A/D encoding result=40 05:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:14 Set channel filter=0.000000e+000 result=40 05:53:14 Config A/D Result=40 05:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:14 Get A/D filter: -9.255963e+061 result=40 05:53:14 Get A/D value=-858993460 result=40 05:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:14 Parameters OK 05:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:14 Set A/D data flow result=40 05:53:14 Set A/D channel type result=40 05:53:14 Set A/D encoding result=40 05:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:14 Set channel filter=0.000000e+000 result=40 05:53:14 Config A/D Result=40 05:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:14 Get A/D filter: -9.255963e+061 result=40 05:53:14 Get A/D value=-858993460 result=40 05:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:14 Aux= 05:53:14 Message to Camera, serial 106866 queued 05:53:50 Received message from Master: op=PointingHead serial=106879 05:53:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:53:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:53:51 Point started: ret=0 05:53:51 point_skyscan result=0 05:53:51 Check angles 05:53:51 SkyScan query 05:53:52 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.475<-16565 Statuses=0009 0009 05:53:52 Msec=0 True Az=64.215 Ze=-68.475 Az status=0009 Ze status=0009 05:53:52 Check angles 05:53:52 SkyScan query 05:53:53 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.475<-17965 Statuses=0009 0009 05:53:53 Msec=750 True Az=81.51 Ze=-89.475 Az status=0009 Ze status=0009 05:53:53 Check angles 05:53:53 SkyScan query 05:53:54 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.415<-19361 Statuses=0009 0009 05:53:54 Msec=1500 True Az=99.06 Ze=-110.415 Az status=0009 Ze status=0009 05:53:54 Check angles 05:53:54 SkyScan query 05:53:54 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.355<-20757 Statuses=0009 0009 05:53:54 Msec=2250 True Az=116.67 Ze=-131.355 Az status=0009 Ze status=0009 05:53:54 Check angles 05:53:54 SkyScan query 05:53:55 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 05:53:55 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 05:53:55 Check angles 05:53:55 SkyScan query 05:53:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:53:56 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:53:56 Message to Master queued w/err=0: serial=106879 error=0 05:54:01 Received message from Master: op=Filter serial=106880 05:54:01 Color wheel filter change from 0 to 0 05:54:01 FLIGetFilterPos err=0 currentPosition=0 05:54:01 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:01 Filter is already there-color wheel unchanged 05:54:01 Received message from Master: op=Shutter serial=106881 05:54:01 Shutter LASER close 05:54:01 Received message from Camera: op=State serial=106883 05:54:01 GetSingleValue result=40 Value=cccccccc 05:54:01 SkyScan query 05:54:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:54:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:02 Parameters OK 05:54:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:02 Set A/D data flow result=40 05:54:02 Set A/D channel type result=40 05:54:02 Set A/D encoding result=40 05:54:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:02 Set channel filter=0.000000e+000 result=40 05:54:02 Config A/D Result=40 05:54:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:02 Get A/D filter: -9.255963e+061 result=40 05:54:02 Get A/D value=-858993460 result=40 05:54:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:02 Parameters OK 05:54:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:02 Set A/D data flow result=40 05:54:02 Set A/D channel type result=40 05:54:02 Set A/D encoding result=40 05:54:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:02 Set channel filter=0.000000e+000 result=40 05:54:02 Config A/D Result=40 05:54:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:02 Get A/D filter: -9.255963e+061 result=40 05:54:02 Get A/D value=-858993460 result=40 05:54:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:02 Aux= 05:54:02 Message to Camera, serial 106883 queued 05:54:38 Received message from Master: op=PointingHead serial=106896 05:54:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:54:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:54:39 Point started: ret=0 05:54:39 point_skyscan result=0 05:54:40 Check angles 05:54:40 SkyScan query 05:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0009 0009 05:54:40 Msec=0 True Az=112.995 Ze=-171.3 Az status=0009 Ze status=0009 05:54:40 Check angles 05:54:40 SkyScan query 05:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:54:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:54:41 Message to Master queued w/err=0: serial=106896 error=0 05:54:46 Received message from Master: op=Filter serial=106897 05:54:46 Color wheel filter change from 0 to 0 05:54:46 FLIGetFilterPos err=0 currentPosition=0 05:54:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:46 Filter is already there-color wheel unchanged 05:54:46 Received message from Master: op=Shutter serial=106898 05:54:46 Shutter LASER open 05:54:46 Received message from Camera: op=State serial=106900 05:54:46 GetSingleValue result=40 Value=cccccccc 05:54:46 SkyScan query 05:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:54:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:47 Parameters OK 05:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:47 Set A/D data flow result=40 05:54:47 Set A/D channel type result=40 05:54:47 Set A/D encoding result=40 05:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:47 Set channel filter=0.000000e+000 result=40 05:54:47 Config A/D Result=40 05:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:47 Get A/D filter: -9.255963e+061 result=40 05:54:47 Get A/D value=-858993460 result=40 05:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:47 Parameters OK 05:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:47 Set A/D data flow result=40 05:54:47 Set A/D channel type result=40 05:54:47 Set A/D encoding result=40 05:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:47 Set channel filter=0.000000e+000 result=40 05:54:47 Config A/D Result=40 05:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:47 Get A/D filter: -9.255963e+061 result=40 05:54:47 Get A/D value=-858993460 result=40 05:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:47 Aux= 05:54:47 Message to Camera, serial 106900 queued 05:54:55 Received message from Master: op=Shutter serial=106910 05:54:55 Shutter LASER close 05:54:56 Received message from Master: op=PointingHead serial=106914 05:54:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:54:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:54:56 Point started: ret=0 05:54:56 point_skyscan result=0 05:54:57 Check angles 05:54:57 SkyScan query 05:54:57 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.22<-21548 Statuses=0009 0009 05:54:57 Msec=0 True Az=135.9 Ze=-143.22 Az status=0009 Ze status=0009 05:54:58 Check angles 05:54:58 SkyScan query 05:54:58 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.25<-20150 Statuses=0009 0009 05:54:58 Msec=750 True Az=153.375 Ze=-122.25 Az status=0009 Ze status=0009 05:54:58 Check angles 05:54:58 SkyScan query 05:54:59 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.86<-18724 Statuses=0009 0009 05:54:59 Msec=1500 True Az=171.225 Ze=-100.86 Az status=0009 Ze status=0009 05:54:59 Check angles 05:54:59 SkyScan query 05:55:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.965<-17331 Statuses=0008 0009 05:55:00 Msec=2250 True Az=176.01 Ze=-79.965 Az status=0008 Ze status=0009 05:55:00 Check angles 05:55:00 SkyScan query 05:55:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.98<-15932 Statuses=0008 0009 05:55:01 Msec=3000 True Az=176.01 Ze=-58.98 Az status=0008 Ze status=0009 05:55:01 Check angles 05:55:01 SkyScan query 05:55:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:55:01 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:55:01 Message to Master queued w/err=0: serial=106914 error=0 05:55:06 Received message from Master: op=Filter serial=106915 05:55:06 Color wheel filter change from 0 to 0 05:55:06 FLIGetFilterPos err=0 currentPosition=0 05:55:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:06 Filter is already there-color wheel unchanged 05:55:06 Received message from Master: op=Shutter serial=106916 05:55:06 Shutter LASER close 05:55:07 Received message from Camera: op=State serial=106918 05:55:07 GetSingleValue result=40 Value=cccccccc 05:55:07 SkyScan query 05:55:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:55:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:07 Parameters OK 05:55:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:07 Set A/D data flow result=40 05:55:07 Set A/D channel type result=40 05:55:07 Set A/D encoding result=40 05:55:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:07 Set channel filter=0.000000e+000 result=40 05:55:07 Config A/D Result=40 05:55:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:07 Get A/D filter: -9.255963e+061 result=40 05:55:07 Get A/D value=-858993460 result=40 05:55:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:07 Parameters OK 05:55:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:07 Set A/D data flow result=40 05:55:07 Set A/D channel type result=40 05:55:07 Set A/D encoding result=40 05:55:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:07 Set channel filter=0.000000e+000 result=40 05:55:07 Config A/D Result=40 05:55:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:07 Get A/D filter: -9.255963e+061 result=40 05:55:07 Get A/D value=-858993460 result=40 05:55:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:07 Aux= 05:55:07 Message to Camera, serial 106918 queued 05:55:44 Received message from Master: op=PointingHead serial=106931 05:55:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:55:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:55:44 Point started: ret=0 05:55:44 point_skyscan result=0 05:55:45 Check angles 05:55:45 SkyScan query 05:55:46 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.795<-13453 Statuses=0009 0009 05:55:46 Msec=0 True Az=152.985 Ze=-21.795 Az status=0009 Ze status=0009 [UTC 2018-12-13 05:55:46] 05:55:46 Check angles 05:55:46 SkyScan query 05:55:47 SkyScan query done: ret=0 az=134.01<-8934 ze=0.96<-11936 Statuses=0009 0009 05:55:47 Msec=750 True Az=134.01 Ze=0.96 Az status=0009 Ze status=0009 05:55:47 Check angles 05:55:47 SkyScan query 05:55:47 SkyScan query done: ret=0 az=118.02<-7868 ze=20.16<-10656 Statuses=0009 0009 05:55:47 Msec=1500 True Az=118.02 Ze=20.16 Az status=0009 Ze status=0009 05:55:47 Check angles 05:55:47 SkyScan query 05:55:48 SkyScan query done: ret=0 az=100.62<-6708 ze=41.145<-9257 Statuses=0009 0009 05:55:48 Msec=2250 True Az=100.62 Ze=41.145 Az status=0009 Ze status=0009 05:55:48 Check angles 05:55:48 SkyScan query 05:55:49 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 05:55:49 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 05:55:49 Check angles 05:55:49 SkyScan query 05:55:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:55:49 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:55:49 Message to Master queued w/err=0: serial=106931 error=0 [UTC 2018-12-13 05:55:52] 05:55:54 Received message from Master: op=Filter serial=106932 05:55:54 Color wheel filter change from 0 to 0 05:55:54 FLIGetFilterPos err=0 currentPosition=0 05:55:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:54 Filter is already there-color wheel unchanged 05:55:55 Received message from Master: op=Shutter serial=106933 05:55:55 Shutter LASER close 05:55:55 Received message from Camera: op=State serial=106935 05:55:55 GetSingleValue result=40 Value=cccccccc 05:55:55 SkyScan query 05:55:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:55:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:55 Parameters OK 05:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:55 Set A/D data flow result=40 05:55:55 Set A/D channel type result=40 05:55:55 Set A/D encoding result=40 05:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:55 Set channel filter=0.000000e+000 result=40 05:55:55 Config A/D Result=40 05:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:55 Get A/D filter: -9.255963e+061 result=40 05:55:55 Get A/D value=-858993460 result=40 05:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:55 Parameters OK 05:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:55 Set A/D data flow result=40 05:55:55 Set A/D channel type result=40 05:55:55 Set A/D encoding result=40 05:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:55 Set channel filter=0.000000e+000 result=40 05:55:55 Config A/D Result=40 05:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:55 Get A/D filter: -9.255963e+061 result=40 05:55:55 Get A/D value=-858993460 result=40 05:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:55 Aux= 05:55:55 Message to Camera, serial 106935 queued 05:56:32 Received message from Master: op=PointingHead serial=106948 05:56:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:56:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:56:32 Point started: ret=0 05:56:32 point_skyscan result=0 05:56:33 Check angles 05:56:33 SkyScan query 05:56:34 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 05:56:34 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 05:56:34 Check angles 05:56:34 SkyScan query 05:56:34 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 05:56:34 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 05:56:35 Check angles 05:56:35 SkyScan query 05:56:35 SkyScan query done: ret=0 az=144.525<-9635 ze=38.505<-9433 Statuses=0009 0008 05:56:35 Msec=1500 True Az=144.525 Ze=38.505 Az status=0009 Ze status=0008 05:56:35 Check angles 05:56:35 SkyScan query 05:56:36 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 05:56:36 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 05:56:36 Check angles 05:56:36 SkyScan query 05:56:37 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:56:37 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:56:37 Check angles 05:56:37 SkyScan query 05:56:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:56:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:56:38 Message to Master queued w/err=0: serial=106948 error=0 05:56:43 Received message from Master: op=Filter serial=106949 05:56:43 Color wheel filter change from 0 to 0 05:56:43 FLIGetFilterPos err=0 currentPosition=0 05:56:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:43 Filter is already there-color wheel unchanged 05:56:43 Received message from Master: op=Shutter serial=106950 05:56:43 Shutter LASER close 05:56:43 Received message from Camera: op=State serial=106952 05:56:43 GetSingleValue result=40 Value=cccccccc 05:56:43 SkyScan query 05:56:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:56:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:43 Parameters OK 05:56:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:43 Set A/D data flow result=40 05:56:43 Set A/D channel type result=40 05:56:43 Set A/D encoding result=40 05:56:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:43 Set channel filter=0.000000e+000 result=40 05:56:43 Config A/D Result=40 05:56:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:43 Get A/D filter: -9.255963e+061 result=40 05:56:43 Get A/D value=-858993460 result=40 05:56:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:43 Parameters OK 05:56:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:43 Set A/D data flow result=40 05:56:43 Set A/D channel type result=40 05:56:43 Set A/D encoding result=40 05:56:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:43 Set channel filter=0.000000e+000 result=40 05:56:43 Config A/D Result=40 05:56:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:43 Get A/D filter: -9.255963e+061 result=40 05:56:43 Get A/D value=-858993460 result=40 05:56:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:43 Aux= 05:56:43 Message to Camera, serial 106952 queued 05:57:20 Received message from Master: op=PointingHead serial=106965 05:57:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:57:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:57:20 Point started: ret=0 05:57:20 point_skyscan result=0 05:57:21 Check angles 05:57:21 SkyScan query 05:57:22 SkyScan query done: ret=0 az=152.61<-10174 ze=8.145<-11457 Statuses=0009 0009 05:57:22 Msec=0 True Az=152.61 Ze=8.145 Az status=0009 Ze status=0009 05:57:22 Check angles 05:57:22 SkyScan query 05:57:23 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.735<-12849 Statuses=0009 0009 05:57:23 Msec=750 True Az=135.09 Ze=-12.735 Az status=0009 Ze status=0009 05:57:23 Check angles 05:57:23 SkyScan query 05:57:23 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.705<-14247 Statuses=0009 0009 05:57:23 Msec=1500 True Az=117.525 Ze=-33.705 Az status=0009 Ze status=0009 05:57:23 Check angles 05:57:23 SkyScan query 05:57:24 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.555<-15437 Statuses=0009 0009 05:57:24 Msec=2250 True Az=100.155 Ze=-51.555 Az status=0009 Ze status=0009 05:57:24 Check angles 05:57:24 SkyScan query 05:57:25 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:57:25 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:57:25 Check angles 05:57:25 SkyScan query 05:57:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:57:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:57:26 Message to Master queued w/err=0: serial=106965 error=0 05:57:31 Received message from Master: op=Filter serial=106966 05:57:31 Color wheel filter change from 0 to 0 05:57:31 FLIGetFilterPos err=0 currentPosition=0 05:57:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:31 Filter is already there-color wheel unchanged 05:57:31 Received message from Master: op=Shutter serial=106967 05:57:31 Shutter LASER close 05:57:31 Received message from Camera: op=State serial=106969 05:57:31 GetSingleValue result=40 Value=cccccccc 05:57:31 SkyScan query 05:57:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:57:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:31 Parameters OK 05:57:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:31 Set A/D data flow result=40 05:57:31 Set A/D channel type result=40 05:57:31 Set A/D encoding result=40 05:57:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:31 Set channel filter=0.000000e+000 result=40 05:57:31 Config A/D Result=40 05:57:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:31 Get A/D filter: -9.255963e+061 result=40 05:57:31 Get A/D value=-858993460 result=40 05:57:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:31 Parameters OK 05:57:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:31 Set A/D data flow result=40 05:57:31 Set A/D channel type result=40 05:57:31 Set A/D encoding result=40 05:57:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:31 Set channel filter=0.000000e+000 result=40 05:57:31 Config A/D Result=40 05:57:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:31 Get A/D filter: -9.255963e+061 result=40 05:57:31 Get A/D value=-858993460 result=40 05:57:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:31 Aux= 05:57:31 Message to Camera, serial 106969 queued 05:58:07 Received message from Master: op=PointingHead serial=106981 05:58:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:58:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:58:08 Point started: ret=0 05:58:08 point_skyscan result=0 05:58:08 Check angles 05:58:08 SkyScan query 05:58:09 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.105<-17407 Statuses=0009 0009 05:58:09 Msec=0 True Az=109.005 Ze=-81.105 Az status=0009 Ze status=0009 05:58:09 Check angles 05:58:09 SkyScan query 05:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 05:58:10 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 05:58:10 Check angles 05:58:10 SkyScan query 05:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 05:58:10 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 05:58:11 Check angles 05:58:11 SkyScan query 05:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 05:58:11 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 05:58:11 Check angles 05:58:11 SkyScan query 05:58:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 05:58:12 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 05:58:12 Check angles 05:58:12 SkyScan query 05:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:58:13 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:58:13 Message to Master queued w/err=0: serial=106981 error=0 05:58:18 Received message from Master: op=Filter serial=106982 05:58:18 Color wheel filter change from 0 to 0 05:58:18 FLIGetFilterPos err=0 currentPosition=0 05:58:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:18 Filter is already there-color wheel unchanged 05:58:18 Received message from Master: op=Shutter serial=106983 05:58:18 Shutter LASER open 05:58:18 Received message from Camera: op=State serial=106985 05:58:18 GetSingleValue result=40 Value=cccccccc 05:58:18 SkyScan query 05:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:58:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:19 Parameters OK 05:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:19 Set A/D data flow result=40 05:58:19 Set A/D channel type result=40 05:58:19 Set A/D encoding result=40 05:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:19 Set channel filter=0.000000e+000 result=40 05:58:19 Config A/D Result=40 05:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:19 Get A/D filter: -9.255963e+061 result=40 05:58:19 Get A/D value=-858993460 result=40 05:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:19 Parameters OK 05:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:19 Set A/D data flow result=40 05:58:19 Set A/D channel type result=40 05:58:19 Set A/D encoding result=40 05:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:19 Set channel filter=0.000000e+000 result=40 05:58:19 Config A/D Result=40 05:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:19 Get A/D filter: -9.255963e+061 result=40 05:58:19 Get A/D value=-858993460 result=40 05:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:19 Aux= 05:58:19 Message to Camera, serial 106985 queued 05:58:27 Received message from Master: op=Shutter serial=106995 05:58:27 Shutter LASER close 05:58:27 Received message from Master: op=PointingHead serial=106999 05:58:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:58:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:58:28 Point started: ret=0 05:58:28 point_skyscan result=0 05:58:29 Check angles 05:58:29 SkyScan query 05:58:29 SkyScan query done: ret=0 az=89.82<-5988 ze=157.095<-1527 Statuses=0009 0009 05:58:29 Msec=0 True Az=89.82 Ze=157.095 Az status=0009 Ze status=0009 05:58:29 Check angles 05:58:29 SkyScan query 05:58:30 SkyScan query done: ret=0 az=72.18<-4812 ze=136.155<-2923 Statuses=0009 0009 05:58:30 Msec=750 True Az=72.18 Ze=136.155 Az status=0009 Ze status=0009 05:58:30 Check angles 05:58:30 SkyScan query 05:58:31 SkyScan query done: ret=0 az=54.9<-3660 ze=115.155<-4323 Statuses=0009 0009 05:58:31 Msec=1500 True Az=54.9 Ze=115.155 Az status=0009 Ze status=0009 05:58:31 Check angles 05:58:31 SkyScan query 05:58:31 SkyScan query done: ret=0 az=40.905<-2727 ze=93.78<-5748 Statuses=0009 0009 05:58:31 Msec=2250 True Az=40.905 Ze=93.78 Az status=0009 Ze status=0009 05:58:32 Check angles 05:58:32 SkyScan query 05:58:32 SkyScan query done: ret=0 az=40.995<-2733 ze=72.81<-7146 Statuses=0008 0009 05:58:32 Msec=3000 True Az=40.995 Ze=72.81 Az status=0008 Ze status=0009 05:58:32 Check angles 05:58:32 SkyScan query 05:58:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 05:58:33 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 05:58:33 Check angles 05:58:33 SkyScan query 05:58:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:58:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:58:34 Message to Master queued w/err=0: serial=106999 error=0 05:58:39 Received message from Master: op=Filter serial=107000 05:58:39 Color wheel filter change from 0 to 0 05:58:39 FLIGetFilterPos err=0 currentPosition=0 05:58:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:39 Filter is already there-color wheel unchanged 05:58:39 Received message from Master: op=Shutter serial=107001 05:58:39 Shutter LASER close 05:58:39 Received message from Camera: op=State serial=107003 05:58:39 GetSingleValue result=40 Value=cccccccc 05:58:39 SkyScan query 05:58:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:58:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:40 Parameters OK 05:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:40 Set A/D data flow result=40 05:58:40 Set A/D channel type result=40 05:58:40 Set A/D encoding result=40 05:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:40 Set channel filter=0.000000e+000 result=40 05:58:40 Config A/D Result=40 05:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:40 Get A/D filter: -9.255963e+061 result=40 05:58:40 Get A/D value=-858993460 result=40 05:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:40 Parameters OK 05:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:40 Set A/D data flow result=40 05:58:40 Set A/D channel type result=40 05:58:40 Set A/D encoding result=40 05:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:40 Set channel filter=0.000000e+000 result=40 05:58:40 Config A/D Result=40 05:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:40 Get A/D filter: -9.255963e+061 result=40 05:58:40 Get A/D value=-858993460 result=40 05:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:40 Aux= 05:58:40 Message to Camera, serial 107003 queued 05:59:16 Received message from Master: op=PointingHead serial=107016 05:59:16 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:59:16 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:59:17 Point started: ret=0 05:59:17 point_skyscan result=0 05:59:18 Check angles 05:59:18 SkyScan query 05:59:18 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 05:59:18 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 05:59:18 Check angles 05:59:18 SkyScan query 05:59:19 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 05:59:19 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 05:59:19 Check angles 05:59:19 SkyScan query 05:59:20 SkyScan query done: ret=0 az=99.36<-6624 ze=66.495<-7567 Statuses=0009 0008 05:59:20 Msec=1500 True Az=99.36 Ze=66.495 Az status=0009 Ze status=0008 05:59:20 Check angles 05:59:20 SkyScan query 05:59:20 SkyScan query done: ret=0 az=116.865<-7791 ze=66.495<-7567 Statuses=0009 0008 05:59:20 Msec=2250 True Az=116.865 Ze=66.495 Az status=0009 Ze status=0008 05:59:21 Check angles 05:59:21 SkyScan query 05:59:21 SkyScan query done: ret=0 az=134.34<-8956 ze=66.495<-7567 Statuses=0009 0008 05:59:21 Msec=3000 True Az=134.34 Ze=66.495 Az status=0009 Ze status=0008 05:59:21 Check angles 05:59:21 SkyScan query 05:59:22 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 05:59:22 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 05:59:22 Check angles 05:59:22 SkyScan query 05:59:23 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 05:59:23 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 05:59:23 Message to Master queued w/err=0: serial=107016 error=0 05:59:28 Received message from Master: op=Filter serial=107017 05:59:28 Color wheel filter change from 0 to 0 05:59:28 FLIGetFilterPos err=0 currentPosition=0 05:59:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:28 Filter is already there-color wheel unchanged 05:59:28 Received message from Master: op=Shutter serial=107018 05:59:28 Shutter LASER close 05:59:28 Received message from Camera: op=State serial=107020 05:59:28 GetSingleValue result=40 Value=cccccccc 05:59:28 SkyScan query 05:59:28 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:59:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:28 Parameters OK 05:59:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:28 Set A/D data flow result=40 05:59:28 Set A/D channel type result=40 05:59:28 Set A/D encoding result=40 05:59:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:28 Set channel filter=0.000000e+000 result=40 05:59:28 Config A/D Result=40 05:59:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:28 Get A/D filter: -9.255963e+061 result=40 05:59:28 Get A/D value=-858993460 result=40 05:59:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:28 Parameters OK 05:59:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:28 Set A/D data flow result=40 05:59:28 Set A/D channel type result=40 05:59:28 Set A/D encoding result=40 05:59:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:28 Set channel filter=0.000000e+000 result=40 05:59:28 Config A/D Result=40 05:59:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:28 Get A/D filter: -9.255963e+061 result=40 05:59:28 Get A/D value=-858993460 result=40 05:59:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:28 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:28 Aux= 05:59:28 Message to Camera, serial 107020 queued 06:00:05 Received message from Master: op=PointingHead serial=107033 06:00:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:00:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:00:06 Point started: ret=0 06:00:06 point_skyscan result=0 06:00:06 Check angles 06:00:06 SkyScan query 06:00:07 SkyScan query done: ret=0 az=134.835<-8989 ze=36.675<-9555 Statuses=0009 0009 06:00:07 Msec=0 True Az=134.835 Ze=36.675 Az status=0009 Ze status=0009 06:00:07 Check angles 06:00:07 SkyScan query 06:00:08 SkyScan query done: ret=0 az=116.985<-7799 ze=15.36<-10976 Statuses=0009 0009 06:00:08 Msec=750 True Az=116.985 Ze=15.36 Az status=0009 Ze status=0009 06:00:08 Check angles 06:00:08 SkyScan query 06:00:08 SkyScan query done: ret=0 az=99.675<-6645 ze=-5.61<-12374 Statuses=0009 0009 06:00:08 Msec=1500 True Az=99.675 Ze=-5.61 Az status=0009 Ze status=0009 06:00:09 Check angles 06:00:09 SkyScan query 06:00:09 SkyScan query done: ret=0 az=82.17<-5478 ze=-26.55<-13770 Statuses=0009 0009 06:00:09 Msec=2250 True Az=82.17 Ze=-26.55 Az status=0009 Ze status=0009 06:00:09 Check angles 06:00:09 SkyScan query 06:00:10 SkyScan query done: ret=0 az=64.665<-4311 ze=-38.565<-14571 Statuses=0009 0008 06:00:10 Msec=3000 True Az=64.665 Ze=-38.565 Az status=0009 Ze status=0008 06:00:10 Check angles 06:00:10 SkyScan query 06:00:11 SkyScan query done: ret=0 az=46.86<-3124 ze=-38.535<-14569 Statuses=0009 0008 06:00:11 Msec=3750 True Az=46.86 Ze=-38.535 Az status=0009 Ze status=0008 06:00:11 Check angles 06:00:11 SkyScan query 06:00:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:00:11 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:00:11 Message to Master queued w/err=0: serial=107033 error=0 06:00:16 Received message from Master: op=Filter serial=107034 06:00:16 Color wheel filter change from 0 to 0 06:00:16 FLIGetFilterPos err=0 currentPosition=0 06:00:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:16 Filter is already there-color wheel unchanged 06:00:17 Received message from Master: op=Shutter serial=107035 06:00:17 Shutter LASER close 06:00:17 Received message from Camera: op=State serial=107037 06:00:17 GetSingleValue result=40 Value=cccccccc 06:00:17 SkyScan query 06:00:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:00:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:17 Parameters OK 06:00:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:17 Set A/D data flow result=40 06:00:17 Set A/D channel type result=40 06:00:17 Set A/D encoding result=40 06:00:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:17 Set channel filter=0.000000e+000 result=40 06:00:17 Config A/D Result=40 06:00:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:17 Get A/D filter: -9.255963e+061 result=40 06:00:17 Get A/D value=-858993460 result=40 06:00:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:17 Parameters OK 06:00:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:17 Set A/D data flow result=40 06:00:17 Set A/D channel type result=40 06:00:17 Set A/D encoding result=40 06:00:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:17 Set channel filter=0.000000e+000 result=40 06:00:17 Config A/D Result=40 06:00:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:17 Get A/D filter: -9.255963e+061 result=40 06:00:17 Get A/D value=-858993460 result=40 06:00:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:17 Aux= 06:00:17 Message to Camera, serial 107037 queued 06:00:54 Received message from Master: op=PointingHead serial=107050 06:00:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:00:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:00:54 Point started: ret=0 06:00:54 point_skyscan result=0 06:00:55 Check angles 06:00:55 SkyScan query 06:00:56 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.325<-16555 Statuses=0009 0009 06:00:56 Msec=0 True Az=64.02 Ze=-68.325 Az status=0009 Ze status=0009 06:00:56 Check angles 06:00:56 SkyScan query 06:00:56 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.325<-17955 Statuses=0009 0009 06:00:56 Msec=750 True Az=81.36 Ze=-89.325 Az status=0009 Ze status=0009 06:00:57 Check angles 06:00:57 SkyScan query 06:00:57 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.265<-19351 Statuses=0009 0009 06:00:57 Msec=1500 True Az=98.955 Ze=-110.265 Az status=0009 Ze status=0009 06:00:57 Check angles 06:00:57 SkyScan query 06:00:58 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.25<-20750 Statuses=0009 0009 06:00:58 Msec=2250 True Az=116.49 Ze=-131.25 Az status=0009 Ze status=0009 06:00:58 Check angles 06:00:58 SkyScan query 06:00:59 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 06:00:59 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 06:00:59 Check angles 06:00:59 SkyScan query 06:00:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:00:59 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:00:59 Message to Master queued w/err=0: serial=107050 error=0 06:01:04 Received message from Master: op=Filter serial=107051 06:01:04 Color wheel filter change from 0 to 0 06:01:04 FLIGetFilterPos err=0 currentPosition=0 06:01:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:04 Filter is already there-color wheel unchanged 06:01:05 Received message from Master: op=Shutter serial=107052 06:01:05 Shutter LASER close 06:01:05 Received message from Camera: op=State serial=107054 06:01:05 GetSingleValue result=40 Value=cccccccc 06:01:05 SkyScan query 06:01:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:01:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:05 Parameters OK 06:01:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:05 Set A/D data flow result=40 06:01:05 Set A/D channel type result=40 06:01:05 Set A/D encoding result=40 06:01:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:05 Set channel filter=0.000000e+000 result=40 06:01:05 Config A/D Result=40 06:01:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:05 Get A/D filter: -9.255963e+061 result=40 06:01:05 Get A/D value=-858993460 result=40 06:01:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:05 Parameters OK 06:01:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:05 Set A/D data flow result=40 06:01:05 Set A/D channel type result=40 06:01:05 Set A/D encoding result=40 06:01:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:05 Set channel filter=0.000000e+000 result=40 06:01:05 Config A/D Result=40 06:01:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:05 Get A/D filter: -9.255963e+061 result=40 06:01:05 Get A/D value=-858993460 result=40 06:01:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:05 Aux= 06:01:05 Message to Camera, serial 107054 queued 06:01:41 Received message from Master: op=PointingHead serial=107066 06:01:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:01:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:01:42 Point started: ret=0 06:01:42 point_skyscan result=0 06:01:42 Check angles 06:01:42 SkyScan query 06:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 06:01:43 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 06:01:43 Check angles 06:01:43 SkyScan query 06:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:01:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:01:44 Message to Master queued w/err=0: serial=107066 error=0 06:01:49 Received message from Master: op=Filter serial=107067 06:01:49 Color wheel filter change from 0 to 0 06:01:49 FLIGetFilterPos err=0 currentPosition=0 06:01:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:49 Filter is already there-color wheel unchanged 06:01:49 Received message from Master: op=Shutter serial=107068 06:01:49 Shutter LASER open 06:01:49 Received message from Camera: op=State serial=107070 06:01:49 GetSingleValue result=40 Value=cccccccc 06:01:49 SkyScan query 06:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:01:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:50 Parameters OK 06:01:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:50 Set A/D data flow result=40 06:01:50 Set A/D channel type result=40 06:01:50 Set A/D encoding result=40 06:01:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:50 Set channel filter=0.000000e+000 result=40 06:01:50 Config A/D Result=40 06:01:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:50 Get A/D filter: -9.255963e+061 result=40 06:01:50 Get A/D value=-858993460 result=40 06:01:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:50 Parameters OK 06:01:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:50 Set A/D data flow result=40 06:01:50 Set A/D channel type result=40 06:01:50 Set A/D encoding result=40 06:01:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:50 Set channel filter=0.000000e+000 result=40 06:01:50 Config A/D Result=40 06:01:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:50 Get A/D filter: -9.255963e+061 result=40 06:01:50 Get A/D value=-858993460 result=40 06:01:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:50 Aux= 06:01:50 Message to Camera, serial 107070 queued 06:01:58 Received message from Master: op=Shutter serial=107080 06:01:58 Shutter LASER close 06:01:59 Received message from Master: op=PointingHead serial=107084 06:01:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:01:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:01:59 Point started: ret=0 06:01:59 point_skyscan result=0 06:02:00 Check angles 06:02:00 SkyScan query 06:02:00 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.46<-21564 Statuses=0009 0009 06:02:00 Msec=0 True Az=135.81 Ze=-143.46 Az status=0009 Ze status=0009 06:02:00 Check angles 06:02:00 SkyScan query 06:02:01 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.49<-20166 Statuses=0009 0009 06:02:01 Msec=750 True Az=153.36 Ze=-122.49 Az status=0009 Ze status=0009 06:02:01 Check angles 06:02:01 SkyScan query 06:02:02 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.58<-18772 Statuses=0009 0009 06:02:02 Msec=1500 True Az=170.775 Ze=-101.58 Az status=0009 Ze status=0009 06:02:02 Check angles 06:02:02 SkyScan query 06:02:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.55<-17370 Statuses=0008 0009 06:02:03 Msec=2250 True Az=176.01 Ze=-80.55 Az status=0008 Ze status=0009 06:02:03 Check angles 06:02:03 SkyScan query 06:02:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.64<-15976 Statuses=0008 0009 06:02:03 Msec=3000 True Az=176.01 Ze=-59.64 Az status=0008 Ze status=0009 06:02:03 Check angles 06:02:03 SkyScan query 06:02:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:02:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:02:04 Message to Master queued w/err=0: serial=107084 error=0 06:02:09 Received message from Master: op=Filter serial=107085 06:02:09 Color wheel filter change from 0 to 0 06:02:09 FLIGetFilterPos err=0 currentPosition=0 06:02:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:09 Filter is already there-color wheel unchanged 06:02:09 Received message from Master: op=Shutter serial=107086 06:02:09 Shutter LASER close 06:02:09 Received message from Camera: op=State serial=107088 06:02:09 GetSingleValue result=40 Value=cccccccc 06:02:09 SkyScan query 06:02:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:02:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:10 Parameters OK 06:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:10 Set A/D data flow result=40 06:02:10 Set A/D channel type result=40 06:02:10 Set A/D encoding result=40 06:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:10 Set channel filter=0.000000e+000 result=40 06:02:10 Config A/D Result=40 06:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:10 Get A/D filter: -9.255963e+061 result=40 06:02:10 Get A/D value=-858993460 result=40 06:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:10 Parameters OK 06:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:10 Set A/D data flow result=40 06:02:10 Set A/D channel type result=40 06:02:10 Set A/D encoding result=40 06:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:10 Set channel filter=0.000000e+000 result=40 06:02:10 Config A/D Result=40 06:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:10 Get A/D filter: -9.255963e+061 result=40 06:02:10 Get A/D value=-858993460 result=40 06:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:10 Aux= 06:02:10 Message to Camera, serial 107088 queued 06:02:47 Received message from Master: op=PointingHead serial=107101 06:02:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:02:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:02:47 Point started: ret=0 06:02:47 point_skyscan result=0 06:02:48 Check angles 06:02:48 SkyScan query 06:02:48 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.795<-13453 Statuses=0009 0009 06:02:48 Msec=0 True Az=152.97 Ze=-21.795 Az status=0009 Ze status=0009 06:02:49 Check angles 06:02:49 SkyScan query 06:02:49 SkyScan query done: ret=0 az=135.18<-9012 ze=-0.36<-12024 Statuses=0009 0009 06:02:49 Msec=750 True Az=135.18 Ze=-0.36 Az status=0009 Ze status=0009 06:02:49 Check angles 06:02:49 SkyScan query 06:02:50 SkyScan query done: ret=0 az=117.57<-7838 ze=20.565<-10629 Statuses=0009 0009 06:02:50 Msec=1500 True Az=117.57 Ze=20.565 Az status=0009 Ze status=0009 06:02:50 Check angles 06:02:50 SkyScan query 06:02:51 SkyScan query done: ret=0 az=100.29<-6686 ze=41.55<-9230 Statuses=0009 0009 06:02:51 Msec=2250 True Az=100.29 Ze=41.55 Az status=0009 Ze status=0009 06:02:51 Check angles 06:02:51 SkyScan query 06:02:51 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:02:51 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:02:52 Check angles 06:02:52 SkyScan query 06:02:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:02:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:02:52 Message to Master queued w/err=0: serial=107101 error=0 06:02:57 Received message from Master: op=Filter serial=107102 06:02:57 Color wheel filter change from 0 to 0 06:02:57 FLIGetFilterPos err=0 currentPosition=0 06:02:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:57 Filter is already there-color wheel unchanged 06:02:57 Received message from Master: op=Shutter serial=107103 06:02:57 Shutter LASER close 06:02:57 Received message from Camera: op=State serial=107105 06:02:57 GetSingleValue result=40 Value=cccccccc 06:02:57 SkyScan query 06:02:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:02:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:58 Parameters OK 06:02:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:58 Set A/D data flow result=40 06:02:58 Set A/D channel type result=40 06:02:58 Set A/D encoding result=40 06:02:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:58 Set channel filter=0.000000e+000 result=40 06:02:58 Config A/D Result=40 06:02:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:58 Get A/D filter: -9.255963e+061 result=40 06:02:58 Get A/D value=-858993460 result=40 06:02:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:58 Parameters OK 06:02:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:58 Set A/D data flow result=40 06:02:58 Set A/D channel type result=40 06:02:58 Set A/D encoding result=40 06:02:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:58 Set channel filter=0.000000e+000 result=40 06:02:58 Config A/D Result=40 06:02:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:58 Get A/D filter: -9.255963e+061 result=40 06:02:58 Get A/D value=-858993460 result=40 06:02:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:58 Aux= 06:02:58 Message to Camera, serial 107105 queued 06:03:35 Received message from Master: op=PointingHead serial=107118 06:03:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:03:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:03:35 Point started: ret=0 06:03:35 point_skyscan result=0 06:03:36 Check angles 06:03:36 SkyScan query 06:03:37 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 06:03:37 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 06:03:37 Check angles 06:03:37 SkyScan query 06:03:37 SkyScan query done: ret=0 az=126.45<-8430 ze=38.505<-9433 Statuses=0009 0008 06:03:37 Msec=750 True Az=126.45 Ze=38.505 Az status=0009 Ze status=0008 06:03:37 Check angles 06:03:37 SkyScan query 06:03:38 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 06:03:38 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 06:03:38 Check angles 06:03:38 SkyScan query 06:03:39 SkyScan query done: ret=0 az=161.655<-10777 ze=38.505<-9433 Statuses=0009 0008 06:03:39 Msec=2250 True Az=161.655 Ze=38.505 Az status=0009 Ze status=0008 06:03:39 Check angles 06:03:39 SkyScan query 06:03:40 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:03:40 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:03:40 Check angles 06:03:40 SkyScan query 06:03:40 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:03:40 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:03:40 Message to Master queued w/err=0: serial=107118 error=0 06:03:45 Received message from Master: op=Filter serial=107119 06:03:45 Color wheel filter change from 0 to 0 06:03:45 FLIGetFilterPos err=0 currentPosition=0 06:03:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:45 Filter is already there-color wheel unchanged 06:03:45 Received message from Master: op=Shutter serial=107120 06:03:45 Shutter LASER close 06:03:46 Received message from Camera: op=State serial=107122 06:03:46 GetSingleValue result=40 Value=cccccccc 06:03:46 SkyScan query 06:03:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:03:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:46 Parameters OK 06:03:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:46 Set A/D data flow result=40 06:03:46 Set A/D channel type result=40 06:03:46 Set A/D encoding result=40 06:03:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:46 Set channel filter=0.000000e+000 result=40 06:03:46 Config A/D Result=40 06:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:46 Get A/D filter: -9.255963e+061 result=40 06:03:46 Get A/D value=-858993460 result=40 06:03:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:46 Parameters OK 06:03:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:46 Set A/D data flow result=40 06:03:46 Set A/D channel type result=40 06:03:46 Set A/D encoding result=40 06:03:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:46 Set channel filter=0.000000e+000 result=40 06:03:46 Config A/D Result=40 06:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:46 Get A/D filter: -9.255963e+061 result=40 06:03:46 Get A/D value=-858993460 result=40 06:03:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:46 Aux= 06:03:46 Message to Camera, serial 107122 queued 06:04:23 Received message from Master: op=PointingHead serial=107135 06:04:23 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:04:23 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:04:23 Point started: ret=0 06:04:23 point_skyscan result=0 06:04:24 Check angles 06:04:24 SkyScan query 06:04:25 SkyScan query done: ret=0 az=152.97<-10198 ze=8.76<-11416 Statuses=0009 0009 06:04:25 Msec=0 True Az=152.97 Ze=8.76 Az status=0009 Ze status=0009 06:04:25 Check angles 06:04:25 SkyScan query 06:04:25 SkyScan query done: ret=0 az=135.615<-9041 ze=-12.21<-12814 Statuses=0009 0009 06:04:25 Msec=750 True Az=135.615 Ze=-12.21 Az status=0009 Ze status=0009 06:04:26 Check angles 06:04:26 SkyScan query 06:04:26 SkyScan query done: ret=0 az=118.095<-7873 ze=-33.12<-14208 Statuses=0009 0009 06:04:26 Msec=1500 True Az=118.095 Ze=-33.12 Az status=0009 Ze status=0009 06:04:26 Check angles 06:04:26 SkyScan query 06:04:27 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.555<-15437 Statuses=0009 0009 06:04:27 Msec=2250 True Az=100.245 Ze=-51.555 Az status=0009 Ze status=0009 06:04:27 Check angles 06:04:27 SkyScan query 06:04:28 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 06:04:28 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 06:04:28 Check angles 06:04:28 SkyScan query 06:04:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:04:28 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:04:28 Message to Master queued w/err=0: serial=107135 error=0 06:04:33 Received message from Master: op=Filter serial=107136 06:04:33 Color wheel filter change from 0 to 0 06:04:33 FLIGetFilterPos err=0 currentPosition=0 06:04:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:33 Filter is already there-color wheel unchanged 06:04:34 Received message from Master: op=Shutter serial=107137 06:04:34 Shutter LASER close 06:04:34 Received message from Camera: op=State serial=107139 06:04:34 GetSingleValue result=40 Value=cccccccc 06:04:34 SkyScan query 06:04:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:04:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:34 Parameters OK 06:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:34 Set A/D data flow result=40 06:04:34 Set A/D channel type result=40 06:04:34 Set A/D encoding result=40 06:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:34 Set channel filter=0.000000e+000 result=40 06:04:34 Config A/D Result=40 06:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:34 Get A/D filter: -9.255963e+061 result=40 06:04:34 Get A/D value=-858993460 result=40 06:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:34 Parameters OK 06:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:34 Set A/D data flow result=40 06:04:34 Set A/D channel type result=40 06:04:34 Set A/D encoding result=40 06:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:34 Set channel filter=0.000000e+000 result=40 06:04:34 Config A/D Result=40 06:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:34 Get A/D filter: -9.255963e+061 result=40 06:04:34 Get A/D value=-858993460 result=40 06:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:34 Aux= 06:04:34 Message to Camera, serial 107139 queued 06:05:11 Received message from Master: op=PointingHead serial=107152 06:05:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:05:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:05:11 Point started: ret=0 06:05:11 point_skyscan result=0 06:05:12 Check angles 06:05:12 SkyScan query 06:05:13 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.06<-17404 Statuses=0009 0009 06:05:13 Msec=0 True Az=108.795 Ze=-81.06 Az status=0009 Ze status=0009 06:05:13 Check angles 06:05:13 SkyScan query 06:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 06:05:13 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 06:05:14 Check angles 06:05:14 SkyScan query 06:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 06:05:14 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 06:05:14 Check angles 06:05:14 SkyScan query 06:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.94<-21596 Statuses=0008 0009 06:05:15 Msec=2250 True Az=112.995 Ze=-143.94 Az status=0008 Ze status=0009 06:05:15 Check angles 06:05:15 SkyScan query 06:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 06:05:16 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 06:05:16 Check angles 06:05:16 SkyScan query 06:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:05:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:05:16 Message to Master queued w/err=0: serial=107152 error=0 06:05:21 Received message from Master: op=Filter serial=107153 06:05:21 Color wheel filter change from 0 to 0 06:05:21 FLIGetFilterPos err=0 currentPosition=0 06:05:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:21 Filter is already there-color wheel unchanged 06:05:22 Received message from Master: op=Shutter serial=107154 06:05:22 Shutter LASER open 06:05:22 Received message from Camera: op=State serial=107156 06:05:22 GetSingleValue result=40 Value=cccccccc 06:05:22 SkyScan query 06:05:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:05:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:22 Parameters OK 06:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:22 Set A/D data flow result=40 06:05:22 Set A/D channel type result=40 06:05:22 Set A/D encoding result=40 06:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:22 Set channel filter=0.000000e+000 result=40 06:05:22 Config A/D Result=40 06:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:22 Get A/D filter: -9.255963e+061 result=40 06:05:22 Get A/D value=-858993460 result=40 06:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:22 Parameters OK 06:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:22 Set A/D data flow result=40 06:05:22 Set A/D channel type result=40 06:05:22 Set A/D encoding result=40 06:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:22 Set channel filter=0.000000e+000 result=40 06:05:22 Config A/D Result=40 06:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:22 Get A/D filter: -9.255963e+061 result=40 06:05:22 Get A/D value=-858993460 result=40 06:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:22 Aux= 06:05:22 Message to Camera, serial 107156 queued 06:05:30 Received message from Master: op=Shutter serial=107165 06:05:30 Shutter LASER close 06:05:31 Received message from Master: op=PointingHead serial=107169 06:05:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:05:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:05:31 Point started: ret=0 06:05:31 point_skyscan result=0 06:05:32 Check angles 06:05:32 SkyScan query 06:05:32 SkyScan query done: ret=0 az=89.415<-5961 ze=156.615<-1559 Statuses=0009 0009 06:05:32 Msec=0 True Az=89.415 Ze=156.615 Az status=0009 Ze status=0009 06:05:32 Check angles 06:05:32 SkyScan query 06:05:33 SkyScan query done: ret=0 az=72.015<-4801 ze=136.11<-2926 Statuses=0009 0009 06:05:33 Msec=750 True Az=72.015 Ze=136.11 Az status=0009 Ze status=0009 06:05:33 Check angles 06:05:33 SkyScan query 06:05:34 SkyScan query done: ret=0 az=54.735<-3649 ze=115.185<-4321 Statuses=0009 0009 06:05:34 Msec=1500 True Az=54.735 Ze=115.185 Az status=0009 Ze status=0009 06:05:34 Check angles 06:05:34 SkyScan query 06:05:35 SkyScan query done: ret=0 az=40.95<-2730 ze=93.735<-5751 Statuses=0009 0009 06:05:35 Msec=2250 True Az=40.95 Ze=93.735 Az status=0009 Ze status=0009 06:05:35 Check angles 06:05:35 SkyScan query 06:05:35 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 06:05:35 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 06:05:35 Check angles 06:05:35 SkyScan query 06:05:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 06:05:36 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 06:05:36 Check angles 06:05:36 SkyScan query 06:05:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:05:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 [UTC 2018-12-13 06:05:37] 06:05:37 Message to Master queued w/err=0: serial=107169 error=0 06:05:42 Received message from Master: op=Filter serial=107170 06:05:42 Color wheel filter change from 0 to 0 06:05:42 FLIGetFilterPos err=0 currentPosition=0 06:05:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:42 Filter is already there-color wheel unchanged 06:05:42 Received message from Master: op=Shutter serial=107171 06:05:42 Shutter LASER close 06:05:42 Received message from Camera: op=State serial=107173 06:05:42 GetSingleValue result=40 Value=cccccccc 06:05:42 SkyScan query 06:05:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:05:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:43 Parameters OK 06:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:43 Set A/D data flow result=40 06:05:43 Set A/D channel type result=40 06:05:43 Set A/D encoding result=40 06:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:43 Set channel filter=0.000000e+000 result=40 06:05:43 Config A/D Result=40 06:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:43 Get A/D filter: -9.255963e+061 result=40 06:05:43 Get A/D value=-858993460 result=40 06:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:43 Parameters OK 06:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:43 Set A/D data flow result=40 06:05:43 Set A/D channel type result=40 06:05:43 Set A/D encoding result=40 06:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:43 Set channel filter=0.000000e+000 result=40 06:05:43 Config A/D Result=40 06:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:43 Get A/D filter: -9.255963e+061 result=40 06:05:43 Get A/D value=-858993460 result=40 06:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:43 Aux= 06:05:43 Message to Camera, serial 107173 queued 06:06:20 Received message from Master: op=PointingHead serial=107186 06:06:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:06:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:06:20 Point started: ret=0 06:06:20 point_skyscan result=0 06:06:21 Check angles 06:06:21 SkyScan query 06:06:21 SkyScan query done: ret=0 az=64.335<-4289 ze=66.555<-7563 Statuses=0009 0008 06:06:21 Msec=0 True Az=64.335 Ze=66.555 Az status=0009 Ze status=0008 06:06:21 Check angles 06:06:21 SkyScan query 06:06:22 SkyScan query done: ret=0 az=82.08<-5472 ze=66.51<-7566 Statuses=0009 0008 06:06:22 Msec=750 True Az=82.08 Ze=66.51 Az status=0009 Ze status=0008 06:06:22 Check angles 06:06:22 SkyScan query 06:06:23 SkyScan query done: ret=0 az=99.675<-6645 ze=66.495<-7567 Statuses=0009 0008 06:06:23 Msec=1500 True Az=99.675 Ze=66.495 Az status=0009 Ze status=0008 06:06:23 Check angles 06:06:23 SkyScan query 06:06:24 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 06:06:24 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 06:06:24 Check angles 06:06:24 SkyScan query 06:06:24 SkyScan query done: ret=0 az=134.97<-8998 ze=66.495<-7567 Statuses=0009 0008 06:06:24 Msec=3000 True Az=134.97 Ze=66.495 Az status=0009 Ze status=0008 06:06:24 Check angles 06:06:24 SkyScan query 06:06:25 SkyScan query done: ret=0 az=152.52<-10168 ze=66.495<-7567 Statuses=0009 0008 06:06:25 Msec=3750 True Az=152.52 Ze=66.495 Az status=0009 Ze status=0008 06:06:25 Check angles 06:06:25 SkyScan query 06:06:26 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 06:06:26 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 06:06:26 Message to Master queued w/err=0: serial=107186 error=0 06:06:31 Received message from Master: op=Filter serial=107187 06:06:31 Color wheel filter change from 0 to 0 06:06:31 FLIGetFilterPos err=0 currentPosition=0 06:06:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:31 Filter is already there-color wheel unchanged 06:06:31 Received message from Master: op=Shutter serial=107188 06:06:31 Shutter LASER close 06:06:31 Received message from Camera: op=State serial=107190 06:06:31 GetSingleValue result=40 Value=cccccccc 06:06:31 SkyScan query 06:06:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:06:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:32 Parameters OK 06:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:32 Set A/D data flow result=40 06:06:32 Set A/D channel type result=40 06:06:32 Set A/D encoding result=40 06:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:32 Set channel filter=0.000000e+000 result=40 06:06:32 Config A/D Result=40 06:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:32 Get A/D filter: -9.255963e+061 result=40 06:06:32 Get A/D value=-858993460 result=40 06:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:32 Parameters OK 06:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:32 Set A/D data flow result=40 06:06:32 Set A/D channel type result=40 06:06:32 Set A/D encoding result=40 06:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:32 Set channel filter=0.000000e+000 result=40 06:06:32 Config A/D Result=40 06:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:32 Get A/D filter: -9.255963e+061 result=40 06:06:32 Get A/D value=-858993460 result=40 06:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:32 Aux= 06:06:32 Message to Camera, serial 107190 queued 06:07:09 Received message from Master: op=PointingHead serial=107203 06:07:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:07:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:07:09 Point started: ret=0 06:07:09 point_skyscan result=0 06:07:10 Check angles 06:07:10 SkyScan query 06:07:10 SkyScan query done: ret=0 az=135.18<-9012 ze=36.87<-9542 Statuses=0009 0009 06:07:10 Msec=0 True Az=135.18 Ze=36.87 Az status=0009 Ze status=0009 06:07:10 Check angles 06:07:10 SkyScan query 06:07:11 SkyScan query done: ret=0 az=117.675<-7845 ze=15.915<-10939 Statuses=0009 0009 06:07:11 Msec=750 True Az=117.675 Ze=15.915 Az status=0009 Ze status=0009 06:07:11 Check angles 06:07:11 SkyScan query 06:07:12 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.46<-12364 Statuses=0009 0009 06:07:12 Msec=1500 True Az=99.945 Ze=-5.46 Az status=0009 Ze status=0009 06:07:12 Check angles 06:07:12 SkyScan query 06:07:12 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.385<-13759 Statuses=0009 0009 06:07:12 Msec=2250 True Az=82.365 Ze=-26.385 Az status=0009 Ze status=0009 06:07:13 Check angles 06:07:13 SkyScan query 06:07:13 SkyScan query done: ret=0 az=64.935<-4329 ze=-38.565<-14571 Statuses=0009 0008 06:07:13 Msec=3000 True Az=64.935 Ze=-38.565 Az status=0009 Ze status=0008 06:07:13 Check angles 06:07:13 SkyScan query 06:07:14 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 06:07:14 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 06:07:14 Check angles 06:07:14 SkyScan query 06:07:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:07:15 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:07:15 Message to Master queued w/err=0: serial=107203 error=0 06:07:20 Received message from Master: op=Filter serial=107204 06:07:20 Color wheel filter change from 0 to 0 06:07:20 FLIGetFilterPos err=0 currentPosition=0 06:07:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:20 Filter is already there-color wheel unchanged 06:07:20 Received message from Master: op=Shutter serial=107205 06:07:20 Shutter LASER close 06:07:20 Received message from Camera: op=State serial=107207 06:07:20 GetSingleValue result=40 Value=cccccccc 06:07:20 SkyScan query 06:07:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:07:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:21 Parameters OK 06:07:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:21 Set A/D data flow result=40 06:07:21 Set A/D channel type result=40 06:07:21 Set A/D encoding result=40 06:07:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:21 Set channel filter=0.000000e+000 result=40 06:07:21 Config A/D Result=40 06:07:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:21 Get A/D filter: -9.255963e+061 result=40 06:07:21 Get A/D value=-858993460 result=40 06:07:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:21 Parameters OK 06:07:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:21 Set A/D data flow result=40 06:07:21 Set A/D channel type result=40 06:07:21 Set A/D encoding result=40 06:07:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:21 Set channel filter=0.000000e+000 result=40 06:07:21 Config A/D Result=40 06:07:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:21 Get A/D filter: -9.255963e+061 result=40 06:07:21 Get A/D value=-858993460 result=40 06:07:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:21 Aux= 06:07:21 Message to Camera, serial 107207 queued 06:07:57 Received message from Master: op=PointingHead serial=107220 06:07:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:07:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:07:58 Point started: ret=0 06:07:58 point_skyscan result=0 06:07:58 Check angles 06:07:58 SkyScan query 06:07:59 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.16<-16544 Statuses=0009 0009 06:07:59 Msec=0 True Az=63.93 Ze=-68.16 Az status=0009 Ze status=0009 06:07:59 Check angles 06:07:59 SkyScan query 06:08:00 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.145<-17943 Statuses=0009 0009 06:08:00 Msec=750 True Az=81.36 Ze=-89.145 Az status=0009 Ze status=0009 06:08:00 Check angles 06:08:00 SkyScan query 06:08:01 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.58<-19372 Statuses=0009 0009 06:08:01 Msec=1500 True Az=99.225 Ze=-110.58 Az status=0009 Ze status=0009 06:08:01 Check angles 06:08:01 SkyScan query 06:08:01 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.505<-20767 Statuses=0009 0009 06:08:01 Msec=2250 True Az=116.805 Ze=-131.505 Az status=0009 Ze status=0009 06:08:01 Check angles 06:08:01 SkyScan query 06:08:02 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 06:08:02 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 06:08:02 Check angles 06:08:02 SkyScan query 06:08:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:08:03 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:08:03 Message to Master queued w/err=0: serial=107220 error=0 06:08:08 Received message from Master: op=Filter serial=107221 06:08:08 Color wheel filter change from 0 to 0 06:08:08 FLIGetFilterPos err=0 currentPosition=0 06:08:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:08 Filter is already there-color wheel unchanged 06:08:08 Received message from Master: op=Shutter serial=107222 06:08:08 Shutter LASER close 06:08:08 Received message from Camera: op=State serial=107224 06:08:08 GetSingleValue result=40 Value=cccccccc 06:08:08 SkyScan query 06:08:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:08:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:09 Parameters OK 06:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:09 Set A/D data flow result=40 06:08:09 Set A/D channel type result=40 06:08:09 Set A/D encoding result=40 06:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:09 Set channel filter=0.000000e+000 result=40 06:08:09 Config A/D Result=40 06:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:09 Get A/D filter: -9.255963e+061 result=40 06:08:09 Get A/D value=-858993460 result=40 06:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:09 Parameters OK 06:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:09 Set A/D data flow result=40 06:08:09 Set A/D channel type result=40 06:08:09 Set A/D encoding result=40 06:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:09 Set channel filter=0.000000e+000 result=40 06:08:09 Config A/D Result=40 06:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:09 Get A/D filter: -9.255963e+061 result=40 06:08:09 Get A/D value=-858993460 result=40 06:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:09 Aux= 06:08:09 Message to Camera, serial 107224 queued 06:08:45 Received message from Master: op=PointingHead serial=107237 06:08:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:08:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:08:46 Point started: ret=0 06:08:46 point_skyscan result=0 06:08:47 Check angles 06:08:47 SkyScan query 06:08:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.36<-23424 Statuses=0009 0009 06:08:47 Msec=0 True Az=112.995 Ze=-171.36 Az status=0009 Ze status=0009 06:08:47 Check angles 06:08:47 SkyScan query 06:08:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:08:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:08:48 Message to Master queued w/err=0: serial=107237 error=0 06:08:53 Received message from Master: op=Filter serial=107238 06:08:53 Color wheel filter change from 0 to 0 06:08:53 FLIGetFilterPos err=0 currentPosition=0 06:08:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:53 Filter is already there-color wheel unchanged 06:08:53 Received message from Master: op=Shutter serial=107239 06:08:53 Shutter LASER open 06:08:53 Received message from Camera: op=State serial=107241 06:08:53 GetSingleValue result=40 Value=cccccccc 06:08:53 SkyScan query 06:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:08:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:54 Parameters OK 06:08:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:54 Set A/D data flow result=40 06:08:54 Set A/D channel type result=40 06:08:54 Set A/D encoding result=40 06:08:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:54 Set channel filter=0.000000e+000 result=40 06:08:54 Config A/D Result=40 06:08:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:54 Get A/D filter: -9.255963e+061 result=40 06:08:54 Get A/D value=-858993460 result=40 06:08:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:54 Parameters OK 06:08:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:54 Set A/D data flow result=40 06:08:54 Set A/D channel type result=40 06:08:54 Set A/D encoding result=40 06:08:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:54 Set channel filter=0.000000e+000 result=40 06:08:54 Config A/D Result=40 06:08:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:54 Get A/D filter: -9.255963e+061 result=40 06:08:54 Get A/D value=-858993460 result=40 06:08:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:54 Aux= 06:08:54 Message to Camera, serial 107241 queued 06:09:02 Received message from Master: op=Shutter serial=107251 06:09:02 Shutter LASER close 06:09:03 Received message from Master: op=PointingHead serial=107255 06:09:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:09:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:09:03 Point started: ret=0 06:09:03 point_skyscan result=0 06:09:04 Check angles 06:09:04 SkyScan query 06:09:05 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.175<-21545 Statuses=0009 0009 06:09:05 Msec=0 True Az=136.02 Ze=-143.175 Az status=0009 Ze status=0009 06:09:05 Check angles 06:09:05 SkyScan query 06:09:05 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.785<-20119 Statuses=0009 0009 06:09:05 Msec=750 True Az=153.9 Ze=-121.785 Az status=0009 Ze status=0009 06:09:05 Check angles 06:09:05 SkyScan query 06:09:06 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.8<-18720 Statuses=0009 0009 06:09:06 Msec=1500 True Az=171.48 Ze=-100.8 Az status=0009 Ze status=0009 06:09:06 Check angles 06:09:06 SkyScan query 06:09:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.92<-17328 Statuses=0008 0009 06:09:07 Msec=2250 True Az=176.01 Ze=-79.92 Az status=0008 Ze status=0009 06:09:07 Check angles 06:09:07 SkyScan query 06:09:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.92<-15928 Statuses=0008 0009 06:09:08 Msec=3000 True Az=176.01 Ze=-58.92 Az status=0008 Ze status=0009 06:09:08 Check angles 06:09:08 SkyScan query 06:09:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:09:08 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:09:08 Message to Master queued w/err=0: serial=107255 error=0 06:09:13 Received message from Master: op=Filter serial=107256 06:09:13 Color wheel filter change from 0 to 0 06:09:13 FLIGetFilterPos err=0 currentPosition=0 06:09:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:13 Filter is already there-color wheel unchanged 06:09:13 Received message from Master: op=Shutter serial=107257 06:09:13 Shutter LASER close 06:09:14 Received message from Camera: op=State serial=107259 06:09:14 GetSingleValue result=40 Value=cccccccc 06:09:14 SkyScan query 06:09:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:09:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:14 Parameters OK 06:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:14 Set A/D data flow result=40 06:09:14 Set A/D channel type result=40 06:09:14 Set A/D encoding result=40 06:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:14 Set channel filter=0.000000e+000 result=40 06:09:14 Config A/D Result=40 06:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:14 Get A/D filter: -9.255963e+061 result=40 06:09:14 Get A/D value=-858993460 result=40 06:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:14 Parameters OK 06:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:14 Set A/D data flow result=40 06:09:14 Set A/D channel type result=40 06:09:14 Set A/D encoding result=40 06:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:14 Set channel filter=0.000000e+000 result=40 06:09:14 Config A/D Result=40 06:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:14 Get A/D filter: -9.255963e+061 result=40 06:09:14 Get A/D value=-858993460 result=40 06:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:14 Aux= 06:09:14 Message to Camera, serial 107259 queued 06:09:51 Received message from Master: op=PointingHead serial=107272 06:09:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:09:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:09:51 Point started: ret=0 06:09:51 point_skyscan result=0 06:09:52 Check angles 06:09:52 SkyScan query 06:09:53 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.195<-13413 Statuses=0009 0009 06:09:53 Msec=0 True Az=152.655 Ze=-21.195 Az status=0009 Ze status=0009 06:09:53 Check angles 06:09:53 SkyScan query 06:09:53 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.255<-12017 Statuses=0009 0009 06:09:53 Msec=750 True Az=135.09 Ze=-0.255 Az status=0009 Ze status=0009 06:09:54 Check angles 06:09:54 SkyScan query 06:09:54 SkyScan query done: ret=0 az=117.27<-7818 ze=21.15<-10590 Statuses=0009 0009 06:09:54 Msec=1500 True Az=117.27 Ze=21.15 Az status=0009 Ze status=0009 06:09:54 Check angles 06:09:54 SkyScan query 06:09:55 SkyScan query done: ret=0 az=99.42<-6628 ze=42.48<-9168 Statuses=0009 0009 06:09:55 Msec=2250 True Az=99.42 Ze=42.48 Az status=0009 Ze status=0009 06:09:55 Check angles 06:09:55 SkyScan query 06:09:56 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 06:09:56 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 06:09:56 Check angles 06:09:56 SkyScan query 06:09:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:09:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:09:57 Message to Master queued w/err=0: serial=107272 error=0 06:10:02 Received message from Master: op=Filter serial=107273 06:10:02 Color wheel filter change from 0 to 0 06:10:02 FLIGetFilterPos err=0 currentPosition=0 06:10:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:02 Filter is already there-color wheel unchanged 06:10:02 Received message from Master: op=Shutter serial=107274 06:10:02 Shutter LASER close 06:10:02 Received message from Camera: op=State serial=107276 06:10:02 GetSingleValue result=40 Value=cccccccc 06:10:02 SkyScan query 06:10:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:10:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:02 Parameters OK 06:10:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:02 Set A/D data flow result=40 06:10:02 Set A/D channel type result=40 06:10:02 Set A/D encoding result=40 06:10:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:02 Set channel filter=0.000000e+000 result=40 06:10:02 Config A/D Result=40 06:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:02 Get A/D filter: -9.255963e+061 result=40 06:10:02 Get A/D value=-858993460 result=40 06:10:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:02 Parameters OK 06:10:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:02 Set A/D data flow result=40 06:10:02 Set A/D channel type result=40 06:10:02 Set A/D encoding result=40 06:10:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:02 Set channel filter=0.000000e+000 result=40 06:10:02 Config A/D Result=40 06:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:02 Get A/D filter: -9.255963e+061 result=40 06:10:02 Get A/D value=-858993460 result=40 06:10:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:02 Aux= 06:10:02 Message to Camera, serial 107276 queued 06:10:39 Received message from Master: op=PointingHead serial=107289 06:10:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:10:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:10:39 Point started: ret=0 06:10:39 point_skyscan result=0 06:10:40 Check angles 06:10:40 SkyScan query 06:10:41 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 06:10:41 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 06:10:41 Check angles 06:10:41 SkyScan query 06:10:42 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 06:10:42 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 06:10:42 Check angles 06:10:42 SkyScan query 06:10:42 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 06:10:42 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 06:10:43 Check angles 06:10:43 SkyScan query 06:10:43 SkyScan query done: ret=0 az=162.03<-10802 ze=38.505<-9433 Statuses=0009 0008 06:10:43 Msec=2250 True Az=162.03 Ze=38.505 Az status=0009 Ze status=0008 06:10:43 Check angles 06:10:43 SkyScan query 06:10:44 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:10:44 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:10:44 Check angles 06:10:44 SkyScan query 06:10:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:10:45 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:10:45 Message to Master queued w/err=0: serial=107289 error=0 06:10:50 Received message from Master: op=Filter serial=107290 06:10:50 Color wheel filter change from 0 to 0 06:10:50 FLIGetFilterPos err=0 currentPosition=0 06:10:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:50 Filter is already there-color wheel unchanged 06:10:50 Received message from Master: op=Shutter serial=107291 06:10:50 Shutter LASER close 06:10:50 Received message from Camera: op=State serial=107293 06:10:50 GetSingleValue result=40 Value=cccccccc 06:10:50 SkyScan query 06:10:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:10:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:50 Parameters OK 06:10:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:50 Set A/D data flow result=40 06:10:50 Set A/D channel type result=40 06:10:50 Set A/D encoding result=40 06:10:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:50 Set channel filter=0.000000e+000 result=40 06:10:50 Config A/D Result=40 06:10:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:50 Get A/D filter: -9.255963e+061 result=40 06:10:50 Get A/D value=-858993460 result=40 06:10:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:50 Parameters OK 06:10:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:50 Set A/D data flow result=40 06:10:50 Set A/D channel type result=40 06:10:50 Set A/D encoding result=40 06:10:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:50 Set channel filter=0.000000e+000 result=40 06:10:50 Config A/D Result=40 06:10:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:50 Get A/D filter: -9.255963e+061 result=40 06:10:50 Get A/D value=-858993460 result=40 06:10:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:50 Aux= 06:10:50 Message to Camera, serial 107293 queued 06:11:27 Received message from Master: op=PointingHead serial=107306 06:11:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:11:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:11:28 Point started: ret=0 06:11:28 point_skyscan result=0 06:11:28 Check angles 06:11:28 SkyScan query 06:11:29 SkyScan query done: ret=0 az=152.67<-10178 ze=8.115<-11459 Statuses=0009 0009 06:11:29 Msec=0 True Az=152.67 Ze=8.115 Az status=0009 Ze status=0009 06:11:29 Check angles 06:11:29 SkyScan query 06:11:30 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.42<-12828 Statuses=0009 0009 06:11:30 Msec=750 True Az=135.33 Ze=-12.42 Az status=0009 Ze status=0009 06:11:30 Check angles 06:11:30 SkyScan query 06:11:30 SkyScan query done: ret=0 az=117.855<-7857 ze=-33.315<-14221 Statuses=0009 0009 06:11:30 Msec=1500 True Az=117.855 Ze=-33.315 Az status=0009 Ze status=0009 06:11:31 Check angles 06:11:31 SkyScan query 06:11:31 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.54<-15436 Statuses=0009 0009 06:11:31 Msec=2250 True Az=100.47 Ze=-51.54 Az status=0009 Ze status=0009 06:11:31 Check angles 06:11:31 SkyScan query 06:11:32 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 06:11:32 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 06:11:32 Check angles 06:11:32 SkyScan query 06:11:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:11:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:11:33 Message to Master queued w/err=0: serial=107306 error=0 06:11:38 Received message from Master: op=Filter serial=107307 06:11:38 Color wheel filter change from 0 to 0 06:11:38 FLIGetFilterPos err=0 currentPosition=0 06:11:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:38 Filter is already there-color wheel unchanged 06:11:38 Received message from Master: op=Shutter serial=107308 06:11:38 Shutter LASER close 06:11:38 Received message from Camera: op=State serial=107310 06:11:38 GetSingleValue result=40 Value=cccccccc 06:11:38 SkyScan query 06:11:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:11:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:38 Parameters OK 06:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:38 Set A/D data flow result=40 06:11:38 Set A/D channel type result=40 06:11:38 Set A/D encoding result=40 06:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:38 Set channel filter=0.000000e+000 result=40 06:11:38 Config A/D Result=40 06:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:38 Get A/D filter: -9.255963e+061 result=40 06:11:38 Get A/D value=-858993460 result=40 06:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:38 Parameters OK 06:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:38 Set A/D data flow result=40 06:11:38 Set A/D channel type result=40 06:11:38 Set A/D encoding result=40 06:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:38 Set channel filter=0.000000e+000 result=40 06:11:38 Config A/D Result=40 06:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:38 Get A/D filter: -9.255963e+061 result=40 06:11:38 Get A/D value=-858993460 result=40 06:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:38 Aux= 06:11:38 Message to Camera, serial 107310 queued 06:12:14 Received message from Master: op=PointingHead serial=107322 06:12:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:12:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:12:15 Point started: ret=0 06:12:15 point_skyscan result=0 06:12:15 Check angles 06:12:15 SkyScan query 06:12:16 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.12<-17408 Statuses=0009 0009 06:12:16 Msec=0 True Az=108.93 Ze=-81.12 Az status=0009 Ze status=0009 06:12:16 Check angles 06:12:16 SkyScan query 06:12:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.105<-18807 Statuses=0008 0009 06:12:17 Msec=750 True Az=112.995 Ze=-102.105 Az status=0008 Ze status=0009 06:12:17 Check angles 06:12:17 SkyScan query 06:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.03<-20202 Statuses=0008 0009 06:12:18 Msec=1500 True Az=112.995 Ze=-123.03 Az status=0008 Ze status=0009 06:12:18 Check angles 06:12:18 SkyScan query 06:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 06:12:18 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 06:12:18 Check angles 06:12:18 SkyScan query 06:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.94<-22996 Statuses=0008 0009 06:12:19 Msec=3000 True Az=112.995 Ze=-164.94 Az status=0008 Ze status=0009 06:12:19 Check angles 06:12:19 SkyScan query 06:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:12:20 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:12:20 Message to Master queued w/err=0: serial=107322 error=0 06:12:25 Received message from Master: op=Filter serial=107323 06:12:25 Color wheel filter change from 0 to 0 06:12:25 FLIGetFilterPos err=0 currentPosition=0 06:12:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:25 Filter is already there-color wheel unchanged 06:12:25 Received message from Master: op=Shutter serial=107324 06:12:25 Shutter LASER open 06:12:25 Received message from Camera: op=State serial=107326 06:12:25 GetSingleValue result=40 Value=cccccccc 06:12:25 SkyScan query 06:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:26 Parameters OK 06:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:26 Set A/D data flow result=40 06:12:26 Set A/D channel type result=40 06:12:26 Set A/D encoding result=40 06:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:26 Set channel filter=0.000000e+000 result=40 06:12:26 Config A/D Result=40 06:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:26 Get A/D filter: -9.255963e+061 result=40 06:12:26 Get A/D value=-858993460 result=40 06:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:26 Parameters OK 06:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:26 Set A/D data flow result=40 06:12:26 Set A/D channel type result=40 06:12:26 Set A/D encoding result=40 06:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:26 Set channel filter=0.000000e+000 result=40 06:12:26 Config A/D Result=40 06:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:26 Get A/D filter: -9.255963e+061 result=40 06:12:26 Get A/D value=-858993460 result=40 06:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:26 Aux= 06:12:26 Message to Camera, serial 107326 queued 06:12:34 Received message from Master: op=Shutter serial=107336 06:12:34 Shutter LASER close 06:12:35 Received message from Master: op=PointingHead serial=107340 06:12:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:12:35 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:12:35 Point started: ret=0 06:12:35 point_skyscan result=0 06:12:36 Check angles 06:12:36 SkyScan query 06:12:36 SkyScan query done: ret=0 az=90.105<-6007 ze=157.455<-1503 Statuses=0009 0009 06:12:36 Msec=0 True Az=90.105 Ze=157.455 Az status=0009 Ze status=0009 06:12:36 Check angles 06:12:36 SkyScan query 06:12:37 SkyScan query done: ret=0 az=72.675<-4845 ze=136.47<-2902 Statuses=0009 0009 06:12:37 Msec=750 True Az=72.675 Ze=136.47 Az status=0009 Ze status=0009 06:12:37 Check angles 06:12:37 SkyScan query 06:12:38 SkyScan query done: ret=0 az=55.125<-3675 ze=115.56<-4296 Statuses=0009 0009 06:12:38 Msec=1500 True Az=55.125 Ze=115.56 Az status=0009 Ze status=0009 06:12:38 Check angles 06:12:38 SkyScan query 06:12:39 SkyScan query done: ret=0 az=40.875<-2725 ze=94.56<-5696 Statuses=0009 0009 06:12:39 Msec=2250 True Az=40.875 Ze=94.56 Az status=0009 Ze status=0009 06:12:39 Check angles 06:12:39 SkyScan query 06:12:39 SkyScan query done: ret=0 az=40.995<-2733 ze=73.635<-7091 Statuses=0008 0009 06:12:39 Msec=3000 True Az=40.995 Ze=73.635 Az status=0008 Ze status=0009 06:12:39 Check angles 06:12:39 SkyScan query 06:12:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.95<-8470 Statuses=0008 0009 06:12:40 Msec=3750 True Az=40.995 Ze=52.95 Az status=0008 Ze status=0009 06:12:40 Check angles 06:12:40 SkyScan query 06:12:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:12:41 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:12:41 Message to Master queued w/err=0: serial=107340 error=0 06:12:46 Received message from Master: op=Filter serial=107341 06:12:46 Color wheel filter change from 0 to 0 06:12:46 FLIGetFilterPos err=0 currentPosition=0 06:12:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:46 Filter is already there-color wheel unchanged 06:12:46 Received message from Master: op=Shutter serial=107342 06:12:46 Shutter LASER close 06:12:46 Received message from Camera: op=State serial=107344 06:12:46 GetSingleValue result=40 Value=cccccccc 06:12:46 SkyScan query 06:12:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:12:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:47 Parameters OK 06:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:47 Set A/D data flow result=40 06:12:47 Set A/D channel type result=40 06:12:47 Set A/D encoding result=40 06:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:47 Set channel filter=0.000000e+000 result=40 06:12:47 Config A/D Result=40 06:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:47 Get A/D filter: -9.255963e+061 result=40 06:12:47 Get A/D value=-858993460 result=40 06:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:47 Parameters OK 06:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:47 Set A/D data flow result=40 06:12:47 Set A/D channel type result=40 06:12:47 Set A/D encoding result=40 06:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:47 Set channel filter=0.000000e+000 result=40 06:12:47 Config A/D Result=40 06:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:47 Get A/D filter: -9.255963e+061 result=40 06:12:47 Get A/D value=-858993460 result=40 06:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:47 Aux= 06:12:47 Message to Camera, serial 107344 queued 06:13:24 Received message from Master: op=PointingHead serial=107357 06:13:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:13:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:13:24 Point started: ret=0 06:13:24 point_skyscan result=0 06:13:25 Check angles 06:13:25 SkyScan query 06:13:25 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 06:13:25 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 06:13:25 Check angles 06:13:25 SkyScan query 06:13:26 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 06:13:26 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 06:13:26 Check angles 06:13:26 SkyScan query 06:13:27 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 06:13:27 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 06:13:27 Check angles 06:13:27 SkyScan query 06:13:27 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 06:13:27 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 06:13:28 Check angles 06:13:28 SkyScan query 06:13:28 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 06:13:28 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 06:13:28 Check angles 06:13:28 SkyScan query 06:13:29 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 06:13:29 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 06:13:29 Check angles 06:13:29 SkyScan query 06:13:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:13:30 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:13:30 Message to Master queued w/err=0: serial=107357 error=0 06:13:35 Received message from Master: op=Filter serial=107358 06:13:35 Color wheel filter change from 0 to 0 06:13:35 FLIGetFilterPos err=0 currentPosition=0 06:13:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:35 Filter is already there-color wheel unchanged 06:13:35 Received message from Master: op=Shutter serial=107359 06:13:35 Shutter LASER close 06:13:35 Received message from Camera: op=State serial=107361 06:13:35 GetSingleValue result=40 Value=cccccccc 06:13:35 SkyScan query 06:13:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:13:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:36 Parameters OK 06:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:36 Set A/D data flow result=40 06:13:36 Set A/D channel type result=40 06:13:36 Set A/D encoding result=40 06:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:36 Set channel filter=0.000000e+000 result=40 06:13:36 Config A/D Result=40 06:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:36 Get A/D filter: -9.255963e+061 result=40 06:13:36 Get A/D value=-858993460 result=40 06:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:36 Parameters OK 06:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:36 Set A/D data flow result=40 06:13:36 Set A/D channel type result=40 06:13:36 Set A/D encoding result=40 06:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:36 Set channel filter=0.000000e+000 result=40 06:13:36 Config A/D Result=40 06:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:36 Get A/D filter: -9.255963e+061 result=40 06:13:36 Get A/D value=-858993460 result=40 06:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:36 Aux= 06:13:36 Message to Camera, serial 107361 queued 06:14:12 Received message from Master: op=PointingHead serial=107374 06:14:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:14:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:14:13 Point started: ret=0 06:14:13 point_skyscan result=0 06:14:13 Check angles 06:14:13 SkyScan query 06:14:14 SkyScan query done: ret=0 az=135.12<-9008 ze=36.81<-9546 Statuses=0009 0009 06:14:14 Msec=0 True Az=135.12 Ze=36.81 Az status=0009 Ze status=0009 06:14:14 Check angles 06:14:14 SkyScan query 06:14:15 SkyScan query done: ret=0 az=117.675<-7845 ze=15.855<-10943 Statuses=0009 0009 06:14:15 Msec=750 True Az=117.675 Ze=15.855 Az status=0009 Ze status=0009 06:14:15 Check angles 06:14:15 SkyScan query 06:14:16 SkyScan query done: ret=0 az=100.305<-6687 ze=-5.115<-12341 Statuses=0009 0009 06:14:16 Msec=1500 True Az=100.305 Ze=-5.115 Az status=0009 Ze status=0009 06:14:16 Check angles 06:14:16 SkyScan query 06:14:16 SkyScan query done: ret=0 az=82.77<-5518 ze=-26.07<-13738 Statuses=0009 0009 06:14:16 Msec=2250 True Az=82.77 Ze=-26.07 Az status=0009 Ze status=0009 06:14:16 Check angles 06:14:16 SkyScan query 06:14:17 SkyScan query done: ret=0 az=65.265<-4351 ze=-38.565<-14571 Statuses=0009 0008 06:14:17 Msec=3000 True Az=65.265 Ze=-38.565 Az status=0009 Ze status=0008 06:14:17 Check angles 06:14:17 SkyScan query 06:14:18 SkyScan query done: ret=0 az=47.79<-3186 ze=-38.535<-14569 Statuses=0009 0008 06:14:18 Msec=3750 True Az=47.79 Ze=-38.535 Az status=0009 Ze status=0008 06:14:18 Check angles 06:14:18 SkyScan query 06:14:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:14:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:14:19 Message to Master queued w/err=0: serial=107374 error=0 06:14:24 Received message from Master: op=Filter serial=107375 06:14:24 Color wheel filter change from 0 to 0 06:14:24 FLIGetFilterPos err=0 currentPosition=0 06:14:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:24 Filter is already there-color wheel unchanged 06:14:24 Received message from Master: op=Shutter serial=107376 06:14:24 Shutter LASER close 06:14:24 Received message from Camera: op=State serial=107378 06:14:24 GetSingleValue result=40 Value=cccccccc 06:14:24 SkyScan query 06:14:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:14:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:24 Parameters OK 06:14:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:24 Set A/D data flow result=40 06:14:24 Set A/D channel type result=40 06:14:24 Set A/D encoding result=40 06:14:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:24 Set channel filter=0.000000e+000 result=40 06:14:24 Config A/D Result=40 06:14:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:24 Get A/D filter: -9.255963e+061 result=40 06:14:24 Get A/D value=-858993460 result=40 06:14:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:24 Parameters OK 06:14:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:24 Set A/D data flow result=40 06:14:24 Set A/D channel type result=40 06:14:24 Set A/D encoding result=40 06:14:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:24 Set channel filter=0.000000e+000 result=40 06:14:24 Config A/D Result=40 06:14:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:24 Get A/D filter: -9.255963e+061 result=40 06:14:24 Get A/D value=-858993460 result=40 06:14:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:24 Aux= 06:14:24 Message to Camera, serial 107378 queued 06:15:01 Received message from Master: op=PointingHead serial=107391 06:15:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:15:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:15:02 Point started: ret=0 06:15:02 point_skyscan result=0 06:15:02 Check angles 06:15:02 SkyScan query 06:15:03 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.25<-16550 Statuses=0009 0009 06:15:03 Msec=0 True Az=64.005 Ze=-68.25 Az status=0009 Ze status=0009 06:15:03 Check angles 06:15:03 SkyScan query 06:15:04 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.25<-17950 Statuses=0009 0009 06:15:04 Msec=750 True Az=81.36 Ze=-89.25 Az status=0009 Ze status=0009 06:15:04 Check angles 06:15:04 SkyScan query 06:15:04 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.19<-19346 Statuses=0009 0009 06:15:04 Msec=1500 True Az=98.865 Ze=-110.19 Az status=0009 Ze status=0009 06:15:05 Check angles 06:15:05 SkyScan query 06:15:05 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.145<-20743 Statuses=0009 0009 06:15:05 Msec=2250 True Az=116.46 Ze=-131.145 Az status=0009 Ze status=0009 06:15:05 Check angles 06:15:05 SkyScan query 06:15:06 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 06:15:06 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 06:15:06 Check angles 06:15:06 SkyScan query 06:15:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:15:07 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:15:07 Message to Master queued w/err=0: serial=107391 error=0 06:15:12 Received message from Master: op=Filter serial=107392 06:15:12 Color wheel filter change from 0 to 0 06:15:12 FLIGetFilterPos err=0 currentPosition=0 06:15:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:12 Filter is already there-color wheel unchanged 06:15:12 Received message from Master: op=Shutter serial=107393 06:15:12 Shutter LASER close 06:15:12 Received message from Camera: op=State serial=107395 06:15:12 GetSingleValue result=40 Value=cccccccc 06:15:12 SkyScan query 06:15:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:15:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:12 Parameters OK 06:15:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:12 Set A/D data flow result=40 06:15:12 Set A/D channel type result=40 06:15:12 Set A/D encoding result=40 06:15:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:12 Set channel filter=0.000000e+000 result=40 06:15:12 Config A/D Result=40 06:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:12 Get A/D filter: -9.255963e+061 result=40 06:15:12 Get A/D value=-858993460 result=40 06:15:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:12 Parameters OK 06:15:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:12 Set A/D data flow result=40 06:15:12 Set A/D channel type result=40 06:15:12 Set A/D encoding result=40 06:15:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:12 Set channel filter=0.000000e+000 result=40 06:15:12 Config A/D Result=40 06:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:12 Get A/D filter: -9.255963e+061 result=40 06:15:12 Get A/D value=-858993460 result=40 06:15:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:12 Aux= 06:15:12 Message to Camera, serial 107395 queued 06:15:27 Received message from Master: op=Identify serial=107396 06:15:49 Received message from Master: op=PointingHead serial=107411 06:15:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:15:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:15:50 Point started: ret=0 06:15:50 point_skyscan result=0 06:15:50 Check angles 06:15:50 SkyScan query 06:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 06:15:51 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 06:15:51 Check angles 06:15:51 SkyScan query 06:15:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:15:52 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:15:52 Message to Master queued w/err=0: serial=107411 error=0 [UTC 2018-12-13 06:15:52] 06:15:57 Received message from Master: op=Filter serial=107412 06:15:57 Color wheel filter change from 0 to 0 06:15:57 FLIGetFilterPos err=0 currentPosition=0 06:15:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:57 Filter is already there-color wheel unchanged 06:15:57 Received message from Master: op=Shutter serial=107413 06:15:57 Shutter LASER open 06:15:57 Received message from Camera: op=State serial=107415 06:15:57 GetSingleValue result=40 Value=cccccccc 06:15:57 SkyScan query 06:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:15:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:58 Parameters OK 06:15:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:58 Set A/D data flow result=40 06:15:58 Set A/D channel type result=40 06:15:58 Set A/D encoding result=40 06:15:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:58 Set channel filter=0.000000e+000 result=40 06:15:58 Config A/D Result=40 06:15:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:58 Get A/D filter: -9.255963e+061 result=40 06:15:58 Get A/D value=-858993460 result=40 06:15:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:58 Parameters OK 06:15:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:58 Set A/D data flow result=40 06:15:58 Set A/D channel type result=40 06:15:58 Set A/D encoding result=40 06:15:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:58 Set channel filter=0.000000e+000 result=40 06:15:58 Config A/D Result=40 06:15:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:58 Get A/D filter: -9.255963e+061 result=40 06:15:58 Get A/D value=-858993460 result=40 06:15:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:58 Aux= 06:15:58 Message to Camera, serial 107415 queued 06:16:06 Received message from Master: op=Shutter serial=107425 06:16:06 Shutter LASER close 06:16:07 Received message from Master: op=PointingHead serial=107429 06:16:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:16:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:16:07 Point started: ret=0 06:16:07 point_skyscan result=0 06:16:08 Check angles 06:16:08 SkyScan query 06:16:08 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.265<-21551 Statuses=0009 0009 06:16:08 Msec=0 True Az=135.9 Ze=-143.265 Az status=0009 Ze status=0009 06:16:09 Check angles 06:16:09 SkyScan query 06:16:09 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.845<-20123 Statuses=0009 0009 06:16:09 Msec=750 True Az=153.795 Ze=-121.845 Az status=0009 Ze status=0009 06:16:09 Check angles 06:16:09 SkyScan query 06:16:10 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.92<-18728 Statuses=0009 0009 06:16:10 Msec=1500 True Az=171.27 Ze=-100.92 Az status=0009 Ze status=0009 06:16:10 Check angles 06:16:10 SkyScan query 06:16:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 06:16:11 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 06:16:11 Check angles 06:16:11 SkyScan query 06:16:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.025<-15935 Statuses=0008 0009 06:16:11 Msec=3000 True Az=176.01 Ze=-59.025 Az status=0008 Ze status=0009 06:16:12 Check angles 06:16:12 SkyScan query 06:16:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:16:12 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:16:12 Message to Master queued w/err=0: serial=107429 error=0 06:16:17 Received message from Master: op=Filter serial=107430 06:16:17 Color wheel filter change from 0 to 0 06:16:17 FLIGetFilterPos err=0 currentPosition=0 06:16:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:17 Filter is already there-color wheel unchanged 06:16:17 Received message from Master: op=Shutter serial=107431 06:16:17 Shutter LASER close 06:16:17 Received message from Camera: op=State serial=107433 06:16:17 GetSingleValue result=40 Value=cccccccc 06:16:17 SkyScan query 06:16:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:16:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:18 Parameters OK 06:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:18 Set A/D data flow result=40 06:16:18 Set A/D channel type result=40 06:16:18 Set A/D encoding result=40 06:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:18 Set channel filter=0.000000e+000 result=40 06:16:18 Config A/D Result=40 06:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:18 Get A/D filter: -9.255963e+061 result=40 06:16:18 Get A/D value=-858993460 result=40 06:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:18 Parameters OK 06:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:18 Set A/D data flow result=40 06:16:18 Set A/D channel type result=40 06:16:18 Set A/D encoding result=40 06:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:18 Set channel filter=0.000000e+000 result=40 06:16:18 Config A/D Result=40 06:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:18 Get A/D filter: -9.255963e+061 result=40 06:16:18 Get A/D value=-858993460 result=40 06:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:18 Aux= 06:16:18 Message to Camera, serial 107433 queued 06:16:55 Received message from Master: op=PointingHead serial=107446 06:16:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:16:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:16:55 Point started: ret=0 06:16:55 point_skyscan result=0 06:16:56 Check angles 06:16:56 SkyScan query 06:16:57 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.035<-13469 Statuses=0009 0009 06:16:57 Msec=0 True Az=153.195 Ze=-22.035 Az status=0009 Ze status=0009 06:16:57 Check angles 06:16:57 SkyScan query 06:16:57 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.05<-12070 Statuses=0009 0009 06:16:57 Msec=750 True Az=135.795 Ze=-1.05 Az status=0009 Ze status=0009 06:16:57 Check angles 06:16:57 SkyScan query 06:16:58 SkyScan query done: ret=0 az=117.765<-7851 ze=20.325<-10645 Statuses=0009 0009 06:16:58 Msec=1500 True Az=117.765 Ze=20.325 Az status=0009 Ze status=0009 06:16:58 Check angles 06:16:58 SkyScan query 06:16:59 SkyScan query done: ret=0 az=100.41<-6694 ze=41.325<-9245 Statuses=0009 0009 06:16:59 Msec=2250 True Az=100.41 Ze=41.325 Az status=0009 Ze status=0009 06:16:59 Check angles 06:16:59 SkyScan query 06:17:00 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 06:17:00 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 06:17:00 Check angles 06:17:00 SkyScan query 06:17:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:17:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:17:00 Message to Master queued w/err=0: serial=107446 error=0 06:17:05 Received message from Master: op=Filter serial=107447 06:17:05 Color wheel filter change from 0 to 0 06:17:05 FLIGetFilterPos err=0 currentPosition=0 06:17:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:05 Filter is already there-color wheel unchanged 06:17:05 Received message from Master: op=Shutter serial=107448 06:17:05 Shutter LASER close 06:17:06 Received message from Camera: op=State serial=107450 06:17:06 GetSingleValue result=40 Value=cccccccc 06:17:06 SkyScan query 06:17:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:17:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:06 Parameters OK 06:17:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:06 Set A/D data flow result=40 06:17:06 Set A/D channel type result=40 06:17:06 Set A/D encoding result=40 06:17:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:06 Set channel filter=0.000000e+000 result=40 06:17:06 Config A/D Result=40 06:17:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:06 Get A/D filter: -9.255963e+061 result=40 06:17:06 Get A/D value=-858993460 result=40 06:17:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:06 Parameters OK 06:17:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:06 Set A/D data flow result=40 06:17:06 Set A/D channel type result=40 06:17:06 Set A/D encoding result=40 06:17:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:06 Set channel filter=0.000000e+000 result=40 06:17:06 Config A/D Result=40 06:17:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:06 Get A/D filter: -9.255963e+061 result=40 06:17:06 Get A/D value=-858993460 result=40 06:17:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:06 Aux= 06:17:06 Message to Camera, serial 107450 queued 06:17:42 Received message from Master: op=PointingHead serial=107462 06:17:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:17:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:17:42 Point started: ret=0 06:17:42 point_skyscan result=0 06:17:43 Check angles 06:17:43 SkyScan query 06:17:44 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 06:17:44 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 06:17:44 Check angles 06:17:44 SkyScan query 06:17:44 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 06:17:44 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 06:17:45 Check angles 06:17:45 SkyScan query 06:17:45 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 06:17:45 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 06:17:45 Check angles 06:17:45 SkyScan query 06:17:46 SkyScan query done: ret=0 az=161.85<-10790 ze=38.505<-9433 Statuses=0009 0008 06:17:46 Msec=2250 True Az=161.85 Ze=38.505 Az status=0009 Ze status=0008 06:17:46 Check angles 06:17:46 SkyScan query 06:17:47 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:17:47 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:17:47 Check angles 06:17:47 SkyScan query 06:17:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:17:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:17:47 Message to Master queued w/err=0: serial=107462 error=0 06:17:52 Received message from Master: op=Filter serial=107463 06:17:52 Color wheel filter change from 0 to 0 06:17:52 FLIGetFilterPos err=0 currentPosition=0 06:17:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:52 Filter is already there-color wheel unchanged 06:17:53 Received message from Master: op=Shutter serial=107464 06:17:53 Shutter LASER close 06:17:53 Received message from Camera: op=State serial=107466 06:17:53 GetSingleValue result=40 Value=cccccccc 06:17:53 SkyScan query 06:17:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:17:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:53 Parameters OK 06:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:53 Set A/D data flow result=40 06:17:53 Set A/D channel type result=40 06:17:53 Set A/D encoding result=40 06:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:53 Set channel filter=0.000000e+000 result=40 06:17:53 Config A/D Result=40 06:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:53 Get A/D filter: -9.255963e+061 result=40 06:17:53 Get A/D value=-858993460 result=40 06:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:53 Parameters OK 06:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:53 Set A/D data flow result=40 06:17:53 Set A/D channel type result=40 06:17:53 Set A/D encoding result=40 06:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:53 Set channel filter=0.000000e+000 result=40 06:17:53 Config A/D Result=40 06:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:53 Get A/D filter: -9.255963e+061 result=40 06:17:53 Get A/D value=-858993460 result=40 06:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:53 Aux= 06:17:53 Message to Camera, serial 107466 queued 06:18:30 Received message from Master: op=PointingHead serial=107479 06:18:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:18:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:18:30 Point started: ret=0 06:18:30 point_skyscan result=0 06:18:31 Check angles 06:18:31 SkyScan query 06:18:32 SkyScan query done: ret=0 az=152.97<-10198 ze=8.64<-11424 Statuses=0009 0009 06:18:32 Msec=0 True Az=152.97 Ze=8.64 Az status=0009 Ze status=0009 06:18:32 Check angles 06:18:32 SkyScan query 06:18:32 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.315<-12821 Statuses=0009 0009 06:18:32 Msec=750 True Az=135.42 Ze=-12.315 Az status=0009 Ze status=0009 06:18:33 Check angles 06:18:33 SkyScan query 06:18:33 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.24<-14216 Statuses=0009 0009 06:18:33 Msec=1500 True Az=118.02 Ze=-33.24 Az status=0009 Ze status=0009 06:18:33 Check angles 06:18:33 SkyScan query 06:18:34 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.555<-15437 Statuses=0009 0009 06:18:34 Msec=2250 True Az=100.29 Ze=-51.555 Az status=0009 Ze status=0009 06:18:34 Check angles 06:18:34 SkyScan query 06:18:35 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 06:18:35 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 06:18:35 Check angles 06:18:35 SkyScan query 06:18:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:18:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:18:35 Message to Master queued w/err=0: serial=107479 error=0 06:18:40 Received message from Master: op=Filter serial=107480 06:18:40 Color wheel filter change from 0 to 0 06:18:40 FLIGetFilterPos err=0 currentPosition=0 06:18:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:40 Filter is already there-color wheel unchanged 06:18:41 Received message from Master: op=Shutter serial=107481 06:18:41 Shutter LASER close 06:18:41 Received message from Camera: op=State serial=107483 06:18:41 GetSingleValue result=40 Value=cccccccc 06:18:41 SkyScan query 06:18:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:18:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:41 Parameters OK 06:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:41 Set A/D data flow result=40 06:18:41 Set A/D channel type result=40 06:18:41 Set A/D encoding result=40 06:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:41 Set channel filter=0.000000e+000 result=40 06:18:41 Config A/D Result=40 06:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:41 Get A/D filter: -9.255963e+061 result=40 06:18:41 Get A/D value=-858993460 result=40 06:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:41 Parameters OK 06:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:41 Set A/D data flow result=40 06:18:41 Set A/D channel type result=40 06:18:41 Set A/D encoding result=40 06:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:41 Set channel filter=0.000000e+000 result=40 06:18:41 Config A/D Result=40 06:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:41 Get A/D filter: -9.255963e+061 result=40 06:18:41 Get A/D value=-858993460 result=40 06:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:41 Aux= 06:18:41 Message to Camera, serial 107483 queued 06:19:18 Received message from Master: op=PointingHead serial=107496 06:19:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:19:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:19:18 Point started: ret=0 06:19:18 point_skyscan result=0 06:19:19 Check angles 06:19:19 SkyScan query 06:19:20 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.045<-17403 Statuses=0009 0009 06:19:20 Msec=0 True Az=108.855 Ze=-81.045 Az status=0009 Ze status=0009 06:19:20 Check angles 06:19:20 SkyScan query 06:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 06:19:21 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 06:19:21 Check angles 06:19:21 SkyScan query 06:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 06:19:21 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 06:19:21 Check angles 06:19:21 SkyScan query 06:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 06:19:22 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 06:19:22 Check angles 06:19:22 SkyScan query 06:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 06:19:23 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 06:19:23 Check angles 06:19:23 SkyScan query 06:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:19:24 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:19:24 Message to Master queued w/err=0: serial=107496 error=0 06:19:29 Received message from Master: op=Filter serial=107497 06:19:29 Color wheel filter change from 0 to 0 06:19:29 FLIGetFilterPos err=0 currentPosition=0 06:19:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:29 Filter is already there-color wheel unchanged 06:19:29 Received message from Master: op=Shutter serial=107498 06:19:29 Shutter LASER open 06:19:29 Received message from Camera: op=State serial=107500 06:19:29 GetSingleValue result=40 Value=cccccccc 06:19:29 SkyScan query 06:19:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:19:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:29 Parameters OK 06:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:29 Set A/D data flow result=40 06:19:29 Set A/D channel type result=40 06:19:29 Set A/D encoding result=40 06:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:29 Set channel filter=0.000000e+000 result=40 06:19:29 Config A/D Result=40 06:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:29 Get A/D filter: -9.255963e+061 result=40 06:19:29 Get A/D value=-858993460 result=40 06:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:29 Parameters OK 06:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:29 Set A/D data flow result=40 06:19:29 Set A/D channel type result=40 06:19:29 Set A/D encoding result=40 06:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:29 Set channel filter=0.000000e+000 result=40 06:19:29 Config A/D Result=40 06:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:29 Get A/D filter: -9.255963e+061 result=40 06:19:29 Get A/D value=-858993460 result=40 06:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:29 Aux= 06:19:29 Message to Camera, serial 107500 queued 06:19:38 Received message from Master: op=Shutter serial=107510 06:19:38 Shutter LASER close 06:19:38 Received message from Master: op=PointingHead serial=107514 06:19:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:19:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:19:39 Point started: ret=0 06:19:39 point_skyscan result=0 06:19:39 Check angles 06:19:39 SkyScan query 06:19:40 SkyScan query done: ret=0 az=90.105<-6007 ze=157.5<-1500 Statuses=0009 0009 06:19:40 Msec=0 True Az=90.105 Ze=157.5 Az status=0009 Ze status=0009 06:19:40 Check angles 06:19:40 SkyScan query 06:19:41 SkyScan query done: ret=0 az=72.69<-4846 ze=136.5<-2900 Statuses=0009 0009 06:19:41 Msec=750 True Az=72.69 Ze=136.5 Az status=0009 Ze status=0009 06:19:41 Check angles 06:19:41 SkyScan query 06:19:42 SkyScan query done: ret=0 az=55.155<-3677 ze=115.59<-4294 Statuses=0009 0009 06:19:42 Msec=1500 True Az=55.155 Ze=115.59 Az status=0009 Ze status=0009 06:19:42 Check angles 06:19:42 SkyScan query 06:19:42 SkyScan query done: ret=0 az=40.875<-2725 ze=94.59<-5694 Statuses=0009 0009 06:19:42 Msec=2250 True Az=40.875 Ze=94.59 Az status=0009 Ze status=0009 06:19:42 Check angles 06:19:42 SkyScan query 06:19:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.68<-7088 Statuses=0008 0009 06:19:43 Msec=3000 True Az=40.995 Ze=73.68 Az status=0008 Ze status=0009 06:19:43 Check angles 06:19:43 SkyScan query 06:19:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.995<-8467 Statuses=0008 0009 06:19:44 Msec=3750 True Az=40.995 Ze=52.995 Az status=0008 Ze status=0009 06:19:44 Check angles 06:19:44 SkyScan query 06:19:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:19:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:19:45 Message to Master queued w/err=0: serial=107514 error=0 06:19:50 Received message from Master: op=Filter serial=107515 06:19:50 Color wheel filter change from 0 to 0 06:19:50 FLIGetFilterPos err=0 currentPosition=0 06:19:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:50 Filter is already there-color wheel unchanged 06:19:50 Received message from Master: op=Shutter serial=107516 06:19:50 Shutter LASER close 06:19:50 Received message from Camera: op=State serial=107518 06:19:50 GetSingleValue result=40 Value=cccccccc 06:19:50 SkyScan query 06:19:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:19:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:50 Parameters OK 06:19:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:50 Set A/D data flow result=40 06:19:50 Set A/D channel type result=40 06:19:50 Set A/D encoding result=40 06:19:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:50 Set channel filter=0.000000e+000 result=40 06:19:50 Config A/D Result=40 06:19:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:50 Get A/D filter: -9.255963e+061 result=40 06:19:50 Get A/D value=-858993460 result=40 06:19:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:50 Parameters OK 06:19:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:50 Set A/D data flow result=40 06:19:50 Set A/D channel type result=40 06:19:50 Set A/D encoding result=40 06:19:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:50 Set channel filter=0.000000e+000 result=40 06:19:50 Config A/D Result=40 06:19:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:50 Get A/D filter: -9.255963e+061 result=40 06:19:50 Get A/D value=-858993460 result=40 06:19:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:50 Aux= 06:19:50 Message to Camera, serial 107518 queued 06:20:27 Received message from Master: op=PointingHead serial=107531 06:20:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:20:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:20:28 Point started: ret=0 06:20:28 point_skyscan result=0 06:20:28 Check angles 06:20:28 SkyScan query 06:20:29 SkyScan query done: ret=0 az=64.44<-4296 ze=66.555<-7563 Statuses=0009 0008 06:20:29 Msec=0 True Az=64.44 Ze=66.555 Az status=0009 Ze status=0008 06:20:29 Check angles 06:20:29 SkyScan query 06:20:30 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 06:20:30 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 06:20:30 Check angles 06:20:30 SkyScan query 06:20:30 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 06:20:30 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 06:20:31 Check angles 06:20:31 SkyScan query 06:20:31 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 06:20:31 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 06:20:31 Check angles 06:20:31 SkyScan query 06:20:32 SkyScan query done: ret=0 az=134.43<-8962 ze=66.495<-7567 Statuses=0009 0008 06:20:32 Msec=3000 True Az=134.43 Ze=66.495 Az status=0009 Ze status=0008 06:20:32 Check angles 06:20:32 SkyScan query 06:20:33 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 06:20:33 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 06:20:33 Check angles 06:20:33 SkyScan query 06:20:33 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 06:20:33 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 06:20:33 Message to Master queued w/err=0: serial=107531 error=0 06:20:38 Received message from Master: op=Filter serial=107532 06:20:38 Color wheel filter change from 0 to 0 06:20:38 FLIGetFilterPos err=0 currentPosition=0 06:20:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:38 Filter is already there-color wheel unchanged 06:20:39 Received message from Master: op=Shutter serial=107533 06:20:39 Shutter LASER close 06:20:39 Received message from Camera: op=State serial=107535 06:20:39 GetSingleValue result=40 Value=cccccccc 06:20:39 SkyScan query 06:20:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:20:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:39 Parameters OK 06:20:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:39 Set A/D data flow result=40 06:20:39 Set A/D channel type result=40 06:20:39 Set A/D encoding result=40 06:20:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:39 Set channel filter=0.000000e+000 result=40 06:20:39 Config A/D Result=40 06:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:39 Get A/D filter: -9.255963e+061 result=40 06:20:39 Get A/D value=-858993460 result=40 06:20:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:39 Parameters OK 06:20:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:39 Set A/D data flow result=40 06:20:39 Set A/D channel type result=40 06:20:39 Set A/D encoding result=40 06:20:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:39 Set channel filter=0.000000e+000 result=40 06:20:39 Config A/D Result=40 06:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:39 Get A/D filter: -9.255963e+061 result=40 06:20:39 Get A/D value=-858993460 result=40 06:20:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:39 Aux= 06:20:39 Message to Camera, serial 107535 queued 06:21:16 Received message from Master: op=PointingHead serial=107548 06:21:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:21:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:21:17 Point started: ret=0 06:21:17 point_skyscan result=0 06:21:17 Check angles 06:21:17 SkyScan query 06:21:18 SkyScan query done: ret=0 az=134.895<-8993 ze=36.72<-9552 Statuses=0009 0009 06:21:18 Msec=0 True Az=134.895 Ze=36.72 Az status=0009 Ze status=0009 06:21:18 Check angles 06:21:18 SkyScan query 06:21:19 SkyScan query done: ret=0 az=117.555<-7837 ze=15.765<-10949 Statuses=0009 0009 06:21:19 Msec=750 True Az=117.555 Ze=15.765 Az status=0009 Ze status=0009 06:21:19 Check angles 06:21:19 SkyScan query 06:21:19 SkyScan query done: ret=0 az=100.17<-6678 ze=-5.205<-12347 Statuses=0009 0009 06:21:19 Msec=1500 True Az=100.17 Ze=-5.205 Az status=0009 Ze status=0009 06:21:20 Check angles 06:21:20 SkyScan query 06:21:20 SkyScan query done: ret=0 az=82.545<-5503 ze=-26.13<-13742 Statuses=0009 0009 06:21:20 Msec=2250 True Az=82.545 Ze=-26.13 Az status=0009 Ze status=0009 06:21:20 Check angles 06:21:20 SkyScan query 06:21:21 SkyScan query done: ret=0 az=65.13<-4342 ze=-38.565<-14571 Statuses=0009 0008 06:21:21 Msec=3000 True Az=65.13 Ze=-38.565 Az status=0009 Ze status=0008 06:21:21 Check angles 06:21:21 SkyScan query 06:21:22 SkyScan query done: ret=0 az=47.7<-3180 ze=-38.535<-14569 Statuses=0009 0008 06:21:22 Msec=3750 True Az=47.7 Ze=-38.535 Az status=0009 Ze status=0008 06:21:22 Check angles 06:21:22 SkyScan query 06:21:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:21:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:21:22 Message to Master queued w/err=0: serial=107548 error=0 06:21:27 Received message from Master: op=Filter serial=107549 06:21:27 Color wheel filter change from 0 to 0 06:21:27 FLIGetFilterPos err=0 currentPosition=0 06:21:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:27 Filter is already there-color wheel unchanged 06:21:28 Received message from Master: op=Shutter serial=107550 06:21:28 Shutter LASER close 06:21:28 Received message from Camera: op=State serial=107552 06:21:28 GetSingleValue result=40 Value=cccccccc 06:21:28 SkyScan query 06:21:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:21:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:28 Parameters OK 06:21:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:28 Set A/D data flow result=40 06:21:28 Set A/D channel type result=40 06:21:28 Set A/D encoding result=40 06:21:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:28 Set channel filter=0.000000e+000 result=40 06:21:28 Config A/D Result=40 06:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:28 Get A/D filter: -9.255963e+061 result=40 06:21:28 Get A/D value=-858993460 result=40 06:21:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:28 Parameters OK 06:21:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:28 Set A/D data flow result=40 06:21:28 Set A/D channel type result=40 06:21:28 Set A/D encoding result=40 06:21:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:28 Set channel filter=0.000000e+000 result=40 06:21:28 Config A/D Result=40 06:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:28 Get A/D filter: -9.255963e+061 result=40 06:21:28 Get A/D value=-858993460 result=40 06:21:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:28 Aux= 06:21:28 Message to Camera, serial 107552 queued 06:22:05 Received message from Master: op=PointingHead serial=107565 06:22:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:22:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:22:05 Point started: ret=0 06:22:05 point_skyscan result=0 06:22:06 Check angles 06:22:06 SkyScan query 06:22:07 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.295<-16553 Statuses=0009 0009 06:22:07 Msec=0 True Az=64.08 Ze=-68.295 Az status=0009 Ze status=0009 06:22:07 Check angles 06:22:07 SkyScan query 06:22:07 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.28<-17952 Statuses=0009 0009 06:22:07 Msec=750 True Az=81.36 Ze=-89.28 Az status=0009 Ze status=0009 06:22:08 Check angles 06:22:08 SkyScan query 06:22:08 SkyScan query done: ret=0 az=99<-6600 ze=-110.25<-19350 Statuses=0009 0009 06:22:08 Msec=1500 True Az=99 Ze=-110.25 Az status=0009 Ze status=0009 06:22:08 Check angles 06:22:08 SkyScan query 06:22:09 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.625<-20775 Statuses=0009 0009 06:22:09 Msec=2250 True Az=117.06 Ze=-131.625 Az status=0009 Ze status=0009 06:22:09 Check angles 06:22:09 SkyScan query 06:22:10 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 06:22:10 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 06:22:10 Check angles 06:22:10 SkyScan query 06:22:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:22:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:22:10 Message to Master queued w/err=0: serial=107565 error=0 06:22:15 Received message from Master: op=Filter serial=107566 06:22:15 Color wheel filter change from 0 to 0 06:22:15 FLIGetFilterPos err=0 currentPosition=0 06:22:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:15 Filter is already there-color wheel unchanged 06:22:16 Received message from Master: op=Shutter serial=107567 06:22:16 Shutter LASER close 06:22:16 Received message from Camera: op=State serial=107569 06:22:16 GetSingleValue result=40 Value=cccccccc 06:22:16 SkyScan query 06:22:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:22:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:16 Parameters OK 06:22:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:16 Set A/D data flow result=40 06:22:16 Set A/D channel type result=40 06:22:16 Set A/D encoding result=40 06:22:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:16 Set channel filter=0.000000e+000 result=40 06:22:16 Config A/D Result=40 06:22:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:16 Get A/D filter: -9.255963e+061 result=40 06:22:16 Get A/D value=-858993460 result=40 06:22:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:16 Parameters OK 06:22:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:16 Set A/D data flow result=40 06:22:16 Set A/D channel type result=40 06:22:16 Set A/D encoding result=40 06:22:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:16 Set channel filter=0.000000e+000 result=40 06:22:16 Config A/D Result=40 06:22:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:16 Get A/D filter: -9.255963e+061 result=40 06:22:16 Get A/D value=-858993460 result=40 06:22:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:16 Aux= 06:22:16 Message to Camera, serial 107569 queued 06:22:53 Received message from Master: op=PointingHead serial=107582 06:22:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:22:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:22:53 Point started: ret=0 06:22:53 point_skyscan result=0 06:22:54 Check angles 06:22:54 SkyScan query 06:22:55 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 06:22:55 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 06:22:55 Check angles 06:22:55 SkyScan query 06:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:22:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:22:55 Message to Master queued w/err=0: serial=107582 error=0 06:23:00 Received message from Master: op=Filter serial=107583 06:23:00 Color wheel filter change from 0 to 0 06:23:00 FLIGetFilterPos err=0 currentPosition=0 06:23:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:00 Filter is already there-color wheel unchanged 06:23:01 Received message from Master: op=Shutter serial=107584 06:23:01 Shutter LASER open 06:23:01 Received message from Camera: op=State serial=107586 06:23:01 GetSingleValue result=40 Value=cccccccc 06:23:01 SkyScan query 06:23:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:23:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:01 Parameters OK 06:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:01 Set A/D data flow result=40 06:23:01 Set A/D channel type result=40 06:23:01 Set A/D encoding result=40 06:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:01 Set channel filter=0.000000e+000 result=40 06:23:01 Config A/D Result=40 06:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:01 Get A/D filter: -9.255963e+061 result=40 06:23:01 Get A/D value=-858993460 result=40 06:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:01 Parameters OK 06:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:01 Set A/D data flow result=40 06:23:01 Set A/D channel type result=40 06:23:01 Set A/D encoding result=40 06:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:01 Set channel filter=0.000000e+000 result=40 06:23:01 Config A/D Result=40 06:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:01 Get A/D filter: -9.255963e+061 result=40 06:23:01 Get A/D value=-858993460 result=40 06:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:01 Aux= 06:23:01 Message to Camera, serial 107586 queued 06:23:10 Received message from Master: op=Shutter serial=107596 06:23:10 Shutter LASER close 06:23:10 Received message from Master: op=PointingHead serial=107600 06:23:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:23:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:23:11 Point started: ret=0 06:23:11 point_skyscan result=0 06:23:12 Check angles 06:23:12 SkyScan query 06:23:12 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.475<-21565 Statuses=0009 0009 06:23:12 Msec=0 True Az=135.75 Ze=-143.475 Az status=0009 Ze status=0009 06:23:12 Check angles 06:23:12 SkyScan query 06:23:13 SkyScan query done: ret=0 az=153.69<-10246 ze=-122.04<-20136 Statuses=0009 0009 06:23:13 Msec=750 True Az=153.69 Ze=-122.04 Az status=0009 Ze status=0009 06:23:13 Check angles 06:23:13 SkyScan query 06:23:14 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.07<-18738 Statuses=0009 0009 06:23:14 Msec=1500 True Az=171.135 Ze=-101.07 Az status=0009 Ze status=0009 06:23:14 Check angles 06:23:14 SkyScan query 06:23:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.205<-17347 Statuses=0008 0009 06:23:14 Msec=2250 True Az=176.01 Ze=-80.205 Az status=0008 Ze status=0009 06:23:15 Check angles 06:23:15 SkyScan query 06:23:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 06:23:15 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 06:23:15 Check angles 06:23:15 SkyScan query 06:23:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:23:16 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:23:16 Message to Master queued w/err=0: serial=107600 error=0 06:23:21 Received message from Master: op=Filter serial=107601 06:23:21 Color wheel filter change from 0 to 0 06:23:21 FLIGetFilterPos err=0 currentPosition=0 06:23:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:21 Filter is already there-color wheel unchanged 06:23:21 Received message from Master: op=Shutter serial=107602 06:23:21 Shutter LASER close 06:23:21 Received message from Camera: op=State serial=107604 06:23:21 GetSingleValue result=40 Value=cccccccc 06:23:21 SkyScan query 06:23:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:23:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:22 Parameters OK 06:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:22 Set A/D data flow result=40 06:23:22 Set A/D channel type result=40 06:23:22 Set A/D encoding result=40 06:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:22 Set channel filter=0.000000e+000 result=40 06:23:22 Config A/D Result=40 06:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:22 Get A/D filter: -9.255963e+061 result=40 06:23:22 Get A/D value=-858993460 result=40 06:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:22 Parameters OK 06:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:22 Set A/D data flow result=40 06:23:22 Set A/D channel type result=40 06:23:22 Set A/D encoding result=40 06:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:22 Set channel filter=0.000000e+000 result=40 06:23:22 Config A/D Result=40 06:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:22 Get A/D filter: -9.255963e+061 result=40 06:23:22 Get A/D value=-858993460 result=40 06:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:22 Aux= 06:23:22 Message to Camera, serial 107604 queued 06:23:59 Received message from Master: op=PointingHead serial=107617 06:23:59 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:23:59 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:23:59 Point started: ret=0 06:23:59 point_skyscan result=0 06:24:00 Check angles 06:24:00 SkyScan query 06:24:00 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.72<-13448 Statuses=0009 0009 06:24:00 Msec=0 True Az=152.955 Ze=-21.72 Az status=0009 Ze status=0009 06:24:01 Check angles 06:24:01 SkyScan query 06:24:01 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.27<-12018 Statuses=0009 0009 06:24:01 Msec=750 True Az=135.135 Ze=-0.27 Az status=0009 Ze status=0009 06:24:01 Check angles 06:24:01 SkyScan query 06:24:02 SkyScan query done: ret=0 az=117.54<-7836 ze=20.655<-10623 Statuses=0009 0009 06:24:02 Msec=1500 True Az=117.54 Ze=20.655 Az status=0009 Ze status=0009 06:24:02 Check angles 06:24:02 SkyScan query 06:24:03 SkyScan query done: ret=0 az=100.14<-6676 ze=41.64<-9224 Statuses=0009 0009 06:24:03 Msec=2250 True Az=100.14 Ze=41.64 Az status=0009 Ze status=0009 06:24:03 Check angles 06:24:03 SkyScan query 06:24:03 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 06:24:03 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 06:24:04 Check angles 06:24:04 SkyScan query 06:24:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:24:04 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:24:04 Message to Master queued w/err=0: serial=107617 error=0 06:24:09 Received message from Master: op=Filter serial=107618 06:24:09 Color wheel filter change from 0 to 0 06:24:09 FLIGetFilterPos err=0 currentPosition=0 06:24:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:09 Filter is already there-color wheel unchanged 06:24:09 Received message from Master: op=Shutter serial=107619 06:24:09 Shutter LASER close 06:24:09 Received message from Camera: op=State serial=107621 06:24:09 GetSingleValue result=40 Value=cccccccc 06:24:09 SkyScan query 06:24:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:24:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:10 Parameters OK 06:24:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:10 Set A/D data flow result=40 06:24:10 Set A/D channel type result=40 06:24:10 Set A/D encoding result=40 06:24:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:10 Set channel filter=0.000000e+000 result=40 06:24:10 Config A/D Result=40 06:24:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:10 Get A/D filter: -9.255963e+061 result=40 06:24:10 Get A/D value=-858993460 result=40 06:24:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:10 Parameters OK 06:24:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:10 Set A/D data flow result=40 06:24:10 Set A/D channel type result=40 06:24:10 Set A/D encoding result=40 06:24:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:10 Set channel filter=0.000000e+000 result=40 06:24:10 Config A/D Result=40 06:24:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:10 Get A/D filter: -9.255963e+061 result=40 06:24:10 Get A/D value=-858993460 result=40 06:24:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:10 Aux= 06:24:10 Message to Camera, serial 107621 queued 06:24:47 Received message from Master: op=PointingHead serial=107634 06:24:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:24:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:24:47 Point started: ret=0 06:24:47 point_skyscan result=0 06:24:48 Check angles 06:24:48 SkyScan query 06:24:48 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 06:24:48 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 06:24:49 Check angles 06:24:49 SkyScan query 06:24:49 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 06:24:49 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 06:24:49 Check angles 06:24:49 SkyScan query 06:24:50 SkyScan query done: ret=0 az=144.345<-9623 ze=38.505<-9433 Statuses=0009 0008 06:24:50 Msec=1500 True Az=144.345 Ze=38.505 Az status=0009 Ze status=0008 06:24:50 Check angles 06:24:50 SkyScan query 06:24:51 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 06:24:51 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 06:24:51 Check angles 06:24:51 SkyScan query 06:24:51 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:24:51 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:24:52 Check angles 06:24:52 SkyScan query 06:24:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:24:52 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:24:52 Message to Master queued w/err=0: serial=107634 error=0 06:24:57 Received message from Master: op=Filter serial=107635 06:24:57 Color wheel filter change from 0 to 0 06:24:57 FLIGetFilterPos err=0 currentPosition=0 06:24:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:57 Filter is already there-color wheel unchanged 06:24:57 Received message from Master: op=Shutter serial=107636 06:24:57 Shutter LASER close 06:24:57 Received message from Camera: op=State serial=107638 06:24:57 GetSingleValue result=40 Value=cccccccc 06:24:57 SkyScan query 06:24:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:24:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:58 Parameters OK 06:24:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:58 Set A/D data flow result=40 06:24:58 Set A/D channel type result=40 06:24:58 Set A/D encoding result=40 06:24:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:58 Set channel filter=0.000000e+000 result=40 06:24:58 Config A/D Result=40 06:24:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:58 Get A/D filter: -9.255963e+061 result=40 06:24:58 Get A/D value=-858993460 result=40 06:24:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:58 Parameters OK 06:24:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:58 Set A/D data flow result=40 06:24:58 Set A/D channel type result=40 06:24:58 Set A/D encoding result=40 06:24:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:58 Set channel filter=0.000000e+000 result=40 06:24:58 Config A/D Result=40 06:24:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:58 Get A/D filter: -9.255963e+061 result=40 06:24:58 Get A/D value=-858993460 result=40 06:24:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:58 Aux= 06:24:58 Message to Camera, serial 107638 queued 06:25:35 Received message from Master: op=PointingHead serial=107651 06:25:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:25:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:25:35 Point started: ret=0 06:25:35 point_skyscan result=0 06:25:36 Check angles 06:25:36 SkyScan query 06:25:36 SkyScan query done: ret=0 az=152.715<-10181 ze=8.265<-11449 Statuses=0009 0009 06:25:36 Msec=0 True Az=152.715 Ze=8.265 Az status=0009 Ze status=0009 06:25:37 Check angles 06:25:37 SkyScan query 06:25:37 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.63<-12842 Statuses=0009 0009 06:25:37 Msec=750 True Az=135.165 Ze=-12.63 Az status=0009 Ze status=0009 06:25:37 Check angles 06:25:37 SkyScan query 06:25:38 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.63<-14242 Statuses=0009 0009 06:25:38 Msec=1500 True Az=117.57 Ze=-33.63 Az status=0009 Ze status=0009 06:25:38 Check angles 06:25:38 SkyScan query 06:25:39 SkyScan query done: ret=0 az=99.945<-6663 ze=-51.555<-15437 Statuses=0009 0009 06:25:39 Msec=2250 True Az=99.945 Ze=-51.555 Az status=0009 Ze status=0009 06:25:39 Check angles 06:25:39 SkyScan query 06:25:40 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 06:25:40 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 06:25:40 Check angles 06:25:40 SkyScan query 06:25:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:25:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:25:40 Message to Master queued w/err=0: serial=107651 error=0 06:25:45 Received message from Master: op=Filter serial=107652 06:25:45 Color wheel filter change from 0 to 0 06:25:45 FLIGetFilterPos err=0 currentPosition=0 [UTC 2018-12-13 06:25:45] 06:25:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:45 Filter is already there-color wheel unchanged 06:25:46 Received message from Master: op=Shutter serial=107653 06:25:46 Shutter LASER close 06:25:46 Received message from Camera: op=State serial=107655 06:25:46 GetSingleValue result=40 Value=cccccccc 06:25:46 SkyScan query 06:25:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:25:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:46 Parameters OK 06:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:46 Set A/D data flow result=40 06:25:46 Set A/D channel type result=40 06:25:46 Set A/D encoding result=40 06:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:46 Set channel filter=0.000000e+000 result=40 06:25:46 Config A/D Result=40 06:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:46 Get A/D filter: -9.255963e+061 result=40 06:25:46 Get A/D value=-858993460 result=40 06:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:46 Parameters OK 06:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:46 Set A/D data flow result=40 06:25:46 Set A/D channel type result=40 06:25:46 Set A/D encoding result=40 06:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:46 Set channel filter=0.000000e+000 result=40 06:25:46 Config A/D Result=40 06:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:46 Get A/D filter: -9.255963e+061 result=40 06:25:46 Get A/D value=-858993460 result=40 06:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:46 Aux= 06:25:46 Message to Camera, serial 107655 queued 06:26:22 Received message from Master: op=PointingHead serial=107667 06:26:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:26:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:26:22 Point started: ret=0 06:26:22 point_skyscan result=0 06:26:23 Check angles 06:26:23 SkyScan query 06:26:24 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.15<-17410 Statuses=0009 0009 06:26:24 Msec=0 True Az=108.885 Ze=-81.15 Az status=0009 Ze status=0009 06:26:24 Check angles 06:26:24 SkyScan query 06:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 06:26:24 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 06:26:25 Check angles 06:26:25 SkyScan query 06:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.015<-20201 Statuses=0008 0009 06:26:25 Msec=1500 True Az=112.995 Ze=-123.015 Az status=0008 Ze status=0009 06:26:25 Check angles 06:26:25 SkyScan query 06:26:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 06:26:26 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 06:26:26 Check angles 06:26:26 SkyScan query 06:26:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 06:26:27 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 06:26:27 Check angles 06:26:27 SkyScan query 06:26:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:26:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:26:27 Message to Master queued w/err=0: serial=107667 error=0 06:26:32 Received message from Master: op=Filter serial=107668 06:26:32 Color wheel filter change from 0 to 0 06:26:32 FLIGetFilterPos err=0 currentPosition=0 06:26:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:32 Filter is already there-color wheel unchanged 06:26:33 Received message from Master: op=Shutter serial=107669 06:26:33 Shutter LASER open 06:26:33 Received message from Camera: op=State serial=107671 06:26:33 GetSingleValue result=40 Value=cccccccc 06:26:33 SkyScan query 06:26:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:26:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:33 Parameters OK 06:26:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:33 Set A/D data flow result=40 06:26:33 Set A/D channel type result=40 06:26:33 Set A/D encoding result=40 06:26:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:33 Set channel filter=0.000000e+000 result=40 06:26:33 Config A/D Result=40 06:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:33 Get A/D filter: -9.255963e+061 result=40 06:26:33 Get A/D value=-858993460 result=40 06:26:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:33 Parameters OK 06:26:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:33 Set A/D data flow result=40 06:26:33 Set A/D channel type result=40 06:26:33 Set A/D encoding result=40 06:26:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:33 Set channel filter=0.000000e+000 result=40 06:26:33 Config A/D Result=40 06:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:33 Get A/D filter: -9.255963e+061 result=40 06:26:33 Get A/D value=-858993460 result=40 06:26:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:33 Aux= 06:26:33 Message to Camera, serial 107671 queued 06:26:42 Received message from Master: op=Shutter serial=107681 06:26:42 Shutter LASER close 06:26:42 Received message from Master: op=PointingHead serial=107685 06:26:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:26:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:26:43 Point started: ret=0 06:26:43 point_skyscan result=0 06:26:43 Check angles 06:26:43 SkyScan query 06:26:44 SkyScan query done: ret=0 az=89.445<-5963 ze=156.75<-1550 Statuses=0009 0009 06:26:44 Msec=0 True Az=89.445 Ze=156.75 Az status=0009 Ze status=0009 06:26:44 Check angles 06:26:44 SkyScan query 06:26:45 SkyScan query done: ret=0 az=71.925<-4795 ze=135.78<-2948 Statuses=0009 0009 06:26:45 Msec=750 True Az=71.925 Ze=135.78 Az status=0009 Ze status=0009 06:26:45 Check angles 06:26:45 SkyScan query 06:26:45 SkyScan query done: ret=0 az=54.72<-3648 ze=114.84<-4344 Statuses=0009 0009 06:26:45 Msec=1500 True Az=54.72 Ze=114.84 Az status=0009 Ze status=0009 06:26:46 Check angles 06:26:46 SkyScan query 06:26:46 SkyScan query done: ret=0 az=40.905<-2727 ze=93.855<-5743 Statuses=0009 0009 06:26:46 Msec=2250 True Az=40.905 Ze=93.855 Az status=0009 Ze status=0009 06:26:46 Check angles 06:26:46 SkyScan query 06:26:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 06:26:47 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 06:26:47 Check angles 06:26:47 SkyScan query 06:26:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 06:26:48 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 06:26:48 Check angles 06:26:48 SkyScan query 06:26:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:26:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:26:48 Message to Master queued w/err=0: serial=107685 error=0 06:26:53 Received message from Master: op=Filter serial=107686 06:26:53 Color wheel filter change from 0 to 0 06:26:53 FLIGetFilterPos err=0 currentPosition=0 06:26:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:53 Filter is already there-color wheel unchanged 06:26:54 Received message from Master: op=Shutter serial=107687 06:26:54 Shutter LASER close 06:26:54 Received message from Camera: op=State serial=107689 06:26:54 GetSingleValue result=40 Value=cccccccc 06:26:54 SkyScan query 06:26:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:26:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:54 Parameters OK 06:26:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:54 Set A/D data flow result=40 06:26:54 Set A/D channel type result=40 06:26:54 Set A/D encoding result=40 06:26:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:54 Set channel filter=0.000000e+000 result=40 06:26:54 Config A/D Result=40 06:26:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:54 Get A/D filter: -9.255963e+061 result=40 06:26:54 Get A/D value=-858993460 result=40 06:26:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:54 Parameters OK 06:26:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:54 Set A/D data flow result=40 06:26:54 Set A/D channel type result=40 06:26:54 Set A/D encoding result=40 06:26:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:54 Set channel filter=0.000000e+000 result=40 06:26:54 Config A/D Result=40 06:26:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:54 Get A/D filter: -9.255963e+061 result=40 06:26:54 Get A/D value=-858993460 result=40 06:26:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:54 Aux= 06:26:54 Message to Camera, serial 107689 queued 06:27:31 Received message from Master: op=PointingHead serial=107702 06:27:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:27:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:27:32 Point started: ret=0 06:27:32 point_skyscan result=0 06:27:32 Check angles 06:27:32 SkyScan query 06:27:33 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 06:27:33 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 06:27:33 Check angles 06:27:33 SkyScan query 06:27:34 SkyScan query done: ret=0 az=81.09<-5406 ze=66.495<-7567 Statuses=0009 0008 06:27:34 Msec=750 True Az=81.09 Ze=66.495 Az status=0009 Ze status=0008 06:27:34 Check angles 06:27:34 SkyScan query 06:27:34 SkyScan query done: ret=0 az=98.58<-6572 ze=66.495<-7567 Statuses=0009 0008 06:27:34 Msec=1500 True Az=98.58 Ze=66.495 Az status=0009 Ze status=0008 06:27:35 Check angles 06:27:35 SkyScan query 06:27:35 SkyScan query done: ret=0 az=116.115<-7741 ze=66.495<-7567 Statuses=0009 0008 06:27:35 Msec=2250 True Az=116.115 Ze=66.495 Az status=0009 Ze status=0008 06:27:35 Check angles 06:27:35 SkyScan query 06:27:36 SkyScan query done: ret=0 az=133.71<-8914 ze=66.495<-7567 Statuses=0009 0008 06:27:36 Msec=3000 True Az=133.71 Ze=66.495 Az status=0009 Ze status=0008 06:27:36 Check angles 06:27:36 SkyScan query 06:27:37 SkyScan query done: ret=0 az=151.05<-10070 ze=66.495<-7567 Statuses=0009 0008 06:27:37 Msec=3750 True Az=151.05 Ze=66.495 Az status=0009 Ze status=0008 06:27:37 Check angles 06:27:37 SkyScan query 06:27:37 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 06:27:37 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 06:27:37 Message to Master queued w/err=0: serial=107702 error=0 06:27:42 Received message from Master: op=Filter serial=107703 06:27:42 Color wheel filter change from 0 to 0 06:27:42 FLIGetFilterPos err=0 currentPosition=0 06:27:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:42 Filter is already there-color wheel unchanged 06:27:43 Received message from Master: op=Shutter serial=107704 06:27:43 Shutter LASER close 06:27:43 Received message from Camera: op=State serial=107706 06:27:43 GetSingleValue result=40 Value=cccccccc 06:27:43 SkyScan query 06:27:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:27:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:43 Parameters OK 06:27:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:43 Set A/D data flow result=40 06:27:43 Set A/D channel type result=40 06:27:43 Set A/D encoding result=40 06:27:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:43 Set channel filter=0.000000e+000 result=40 06:27:43 Config A/D Result=40 06:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:43 Get A/D filter: -9.255963e+061 result=40 06:27:43 Get A/D value=-858993460 result=40 06:27:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:43 Parameters OK 06:27:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:43 Set A/D data flow result=40 06:27:43 Set A/D channel type result=40 06:27:43 Set A/D encoding result=40 06:27:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:43 Set channel filter=0.000000e+000 result=40 06:27:43 Config A/D Result=40 06:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:43 Get A/D filter: -9.255963e+061 result=40 06:27:43 Get A/D value=-858993460 result=40 06:27:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:43 Aux= 06:27:43 Message to Camera, serial 107706 queued 06:28:20 Received message from Master: op=PointingHead serial=107719 06:28:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:28:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:28:20 Point started: ret=0 06:28:20 point_skyscan result=0 06:28:21 Check angles 06:28:21 SkyScan query 06:28:22 SkyScan query done: ret=0 az=134.865<-8991 ze=36.585<-9561 Statuses=0009 0009 06:28:22 Msec=0 True Az=134.865 Ze=36.585 Az status=0009 Ze status=0009 06:28:22 Check angles 06:28:22 SkyScan query 06:28:22 SkyScan query done: ret=0 az=117.39<-7826 ze=15.66<-10956 Statuses=0009 0009 06:28:22 Msec=750 True Az=117.39 Ze=15.66 Az status=0009 Ze status=0009 06:28:23 Check angles 06:28:23 SkyScan query 06:28:23 SkyScan query done: ret=0 az=100.005<-6667 ze=-5.325<-12355 Statuses=0009 0009 06:28:23 Msec=1500 True Az=100.005 Ze=-5.325 Az status=0009 Ze status=0009 06:28:23 Check angles 06:28:23 SkyScan query 06:28:24 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.7<-13780 Statuses=0009 0009 06:28:24 Msec=2250 True Az=82.14 Ze=-26.7 Az status=0009 Ze status=0009 06:28:24 Check angles 06:28:24 SkyScan query 06:28:25 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.565<-14571 Statuses=0009 0008 06:28:25 Msec=3000 True Az=64.65 Ze=-38.565 Az status=0009 Ze status=0008 06:28:25 Check angles 06:28:25 SkyScan query 06:28:25 SkyScan query done: ret=0 az=47.22<-3148 ze=-38.535<-14569 Statuses=0009 0008 06:28:25 Msec=3750 True Az=47.22 Ze=-38.535 Az status=0009 Ze status=0008 06:28:26 Check angles 06:28:26 SkyScan query 06:28:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:28:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:28:26 Message to Master queued w/err=0: serial=107719 error=0 06:28:31 Received message from Master: op=Filter serial=107720 06:28:31 Color wheel filter change from 0 to 0 06:28:31 FLIGetFilterPos err=0 currentPosition=0 06:28:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:31 Filter is already there-color wheel unchanged 06:28:31 Received message from Master: op=Shutter serial=107721 06:28:31 Shutter LASER close 06:28:31 Received message from Camera: op=State serial=107723 06:28:31 GetSingleValue result=40 Value=cccccccc 06:28:31 SkyScan query 06:28:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:28:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:32 Parameters OK 06:28:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:32 Set A/D data flow result=40 06:28:32 Set A/D channel type result=40 06:28:32 Set A/D encoding result=40 06:28:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:32 Set channel filter=0.000000e+000 result=40 06:28:32 Config A/D Result=40 06:28:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:32 Get A/D filter: -9.255963e+061 result=40 06:28:32 Get A/D value=-858993460 result=40 06:28:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:32 Parameters OK 06:28:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:32 Set A/D data flow result=40 06:28:32 Set A/D channel type result=40 06:28:32 Set A/D encoding result=40 06:28:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:32 Set channel filter=0.000000e+000 result=40 06:28:32 Config A/D Result=40 06:28:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:32 Get A/D filter: -9.255963e+061 result=40 06:28:32 Get A/D value=-858993460 result=40 06:28:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:32 Aux= 06:28:32 Message to Camera, serial 107723 queued 06:29:09 Received message from Master: op=PointingHead serial=107736 06:29:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:29:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:29:09 Point started: ret=0 06:29:09 point_skyscan result=0 06:29:10 Check angles 06:29:10 SkyScan query 06:29:11 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.025<-16535 Statuses=0009 0009 06:29:11 Msec=0 True Az=63.78 Ze=-68.025 Az status=0009 Ze status=0009 06:29:11 Check angles 06:29:11 SkyScan query 06:29:11 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.46<-17964 Statuses=0009 0009 06:29:11 Msec=750 True Az=81.54 Ze=-89.46 Az status=0009 Ze status=0009 06:29:12 Check angles 06:29:12 SkyScan query 06:29:12 SkyScan query done: ret=0 az=99.555<-6637 ze=-110.865<-19391 Statuses=0009 0009 06:29:12 Msec=1500 True Az=99.555 Ze=-110.865 Az status=0009 Ze status=0009 06:29:12 Check angles 06:29:12 SkyScan query 06:29:13 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.79<-20786 Statuses=0009 0009 06:29:13 Msec=2250 True Az=116.985 Ze=-131.79 Az status=0009 Ze status=0009 06:29:13 Check angles 06:29:13 SkyScan query 06:29:14 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 06:29:14 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 06:29:14 Check angles 06:29:14 SkyScan query 06:29:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:29:14 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:29:14 Message to Master queued w/err=0: serial=107736 error=0 06:29:19 Received message from Master: op=Filter serial=107737 06:29:19 Color wheel filter change from 0 to 0 06:29:19 FLIGetFilterPos err=0 currentPosition=0 06:29:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:19 Filter is already there-color wheel unchanged 06:29:20 Received message from Master: op=Shutter serial=107738 06:29:20 Shutter LASER close 06:29:20 Received message from Camera: op=State serial=107740 06:29:20 GetSingleValue result=40 Value=cccccccc 06:29:20 SkyScan query 06:29:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:29:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:20 Parameters OK 06:29:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:20 Set A/D data flow result=40 06:29:20 Set A/D channel type result=40 06:29:20 Set A/D encoding result=40 06:29:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:20 Set channel filter=0.000000e+000 result=40 06:29:20 Config A/D Result=40 06:29:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:20 Get A/D filter: -9.255963e+061 result=40 06:29:20 Get A/D value=-858993460 result=40 06:29:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:20 Parameters OK 06:29:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:20 Set A/D data flow result=40 06:29:20 Set A/D channel type result=40 06:29:20 Set A/D encoding result=40 06:29:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:20 Set channel filter=0.000000e+000 result=40 06:29:20 Config A/D Result=40 06:29:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:20 Get A/D filter: -9.255963e+061 result=40 06:29:20 Get A/D value=-858993460 result=40 06:29:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:20 Aux= 06:29:20 Message to Camera, serial 107740 queued 06:29:57 Received message from Master: op=PointingHead serial=107753 06:29:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:29:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:29:57 Point started: ret=0 06:29:57 point_skyscan result=0 06:29:58 Check angles 06:29:58 SkyScan query 06:29:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 06:29:59 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 06:29:59 Check angles 06:29:59 SkyScan query 06:29:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:29:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:29:59 Message to Master queued w/err=0: serial=107753 error=0 06:30:04 Received message from Master: op=Filter serial=107754 06:30:04 Color wheel filter change from 0 to 0 06:30:04 FLIGetFilterPos err=0 currentPosition=0 06:30:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:04 Filter is already there-color wheel unchanged 06:30:05 Received message from Master: op=Shutter serial=107755 06:30:05 Shutter LASER open 06:30:05 Received message from Camera: op=State serial=107757 06:30:05 GetSingleValue result=40 Value=cccccccc 06:30:05 SkyScan query 06:30:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:30:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:05 Parameters OK 06:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:05 Set A/D data flow result=40 06:30:05 Set A/D channel type result=40 06:30:05 Set A/D encoding result=40 06:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:05 Set channel filter=0.000000e+000 result=40 06:30:05 Config A/D Result=40 06:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:05 Get A/D filter: -9.255963e+061 result=40 06:30:05 Get A/D value=-858993460 result=40 06:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:05 Parameters OK 06:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:05 Set A/D data flow result=40 06:30:05 Set A/D channel type result=40 06:30:05 Set A/D encoding result=40 06:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:05 Set channel filter=0.000000e+000 result=40 06:30:05 Config A/D Result=40 06:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:05 Get A/D filter: -9.255963e+061 result=40 06:30:05 Get A/D value=-858993460 result=40 06:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:05 Aux= 06:30:05 Message to Camera, serial 107757 queued 06:30:14 Received message from Master: op=Shutter serial=107767 06:30:14 Shutter LASER close 06:30:14 Received message from Master: op=PointingHead serial=107771 06:30:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:30:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:30:15 Point started: ret=0 06:30:15 point_skyscan result=0 06:30:16 Check angles 06:30:16 SkyScan query 06:30:16 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.205<-21547 Statuses=0009 0009 06:30:16 Msec=0 True Az=135.96 Ze=-143.205 Az status=0009 Ze status=0009 06:30:16 Check angles 06:30:16 SkyScan query 06:30:17 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.22<-20148 Statuses=0009 0009 06:30:17 Msec=750 True Az=153.57 Ze=-122.22 Az status=0009 Ze status=0009 06:30:17 Check angles 06:30:17 SkyScan query 06:30:18 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.34<-18756 Statuses=0009 0009 06:30:18 Msec=1500 True Az=170.97 Ze=-101.34 Az status=0009 Ze status=0009 06:30:18 Check angles 06:30:18 SkyScan query 06:30:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.34<-17356 Statuses=0008 0009 06:30:18 Msec=2250 True Az=176.01 Ze=-80.34 Az status=0008 Ze status=0009 06:30:19 Check angles 06:30:19 SkyScan query 06:30:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.4<-15960 Statuses=0008 0009 06:30:19 Msec=3000 True Az=176.01 Ze=-59.4 Az status=0008 Ze status=0009 06:30:19 Check angles 06:30:19 SkyScan query 06:30:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:30:20 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:30:20 Message to Master queued w/err=0: serial=107771 error=0 06:30:25 Received message from Master: op=Filter serial=107772 06:30:25 Color wheel filter change from 0 to 0 06:30:25 FLIGetFilterPos err=0 currentPosition=0 06:30:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:25 Filter is already there-color wheel unchanged 06:30:25 Received message from Master: op=Shutter serial=107773 06:30:25 Shutter LASER close 06:30:25 Received message from Camera: op=State serial=107775 06:30:25 GetSingleValue result=40 Value=cccccccc 06:30:25 SkyScan query 06:30:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:30:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:26 Parameters OK 06:30:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:26 Set A/D data flow result=40 06:30:26 Set A/D channel type result=40 06:30:26 Set A/D encoding result=40 06:30:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:26 Set channel filter=0.000000e+000 result=40 06:30:26 Config A/D Result=40 06:30:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:26 Get A/D filter: -9.255963e+061 result=40 06:30:26 Get A/D value=-858993460 result=40 06:30:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:26 Parameters OK 06:30:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:26 Set A/D data flow result=40 06:30:26 Set A/D channel type result=40 06:30:26 Set A/D encoding result=40 06:30:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:26 Set channel filter=0.000000e+000 result=40 06:30:26 Config A/D Result=40 06:30:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:26 Get A/D filter: -9.255963e+061 result=40 06:30:26 Get A/D value=-858993460 result=40 06:30:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:26 Aux= 06:30:26 Message to Camera, serial 107775 queued 06:31:03 Received message from Master: op=PointingHead serial=107788 06:31:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:31:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:31:03 Point started: ret=0 06:31:03 point_skyscan result=0 06:31:04 Check angles 06:31:04 SkyScan query 06:31:04 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.02<-13468 Statuses=0009 0009 06:31:04 Msec=0 True Az=153.195 Ze=-22.02 Az status=0009 Ze status=0009 06:31:04 Check angles 06:31:04 SkyScan query 06:31:05 SkyScan query done: ret=0 az=135.75<-9050 ze=-1.035<-12069 Statuses=0009 0009 06:31:05 Msec=750 True Az=135.75 Ze=-1.035 Az status=0009 Ze status=0009 06:31:05 Check angles 06:31:05 SkyScan query 06:31:06 SkyScan query done: ret=0 az=118.245<-7883 ze=19.905<-10673 Statuses=0009 0009 06:31:06 Msec=1500 True Az=118.245 Ze=19.905 Az status=0009 Ze status=0009 06:31:06 Check angles 06:31:06 SkyScan query 06:31:07 SkyScan query done: ret=0 az=100.845<-6723 ze=40.89<-9274 Statuses=0009 0009 06:31:07 Msec=2250 True Az=100.845 Ze=40.89 Az status=0009 Ze status=0009 06:31:07 Check angles 06:31:07 SkyScan query 06:31:07 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:31:07 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:31:07 Check angles 06:31:07 SkyScan query 06:31:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:31:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:31:08 Message to Master queued w/err=0: serial=107788 error=0 06:31:13 Received message from Master: op=Filter serial=107789 06:31:13 Color wheel filter change from 0 to 0 06:31:13 FLIGetFilterPos err=0 currentPosition=0 06:31:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:13 Filter is already there-color wheel unchanged 06:31:13 Received message from Master: op=Shutter serial=107790 06:31:13 Shutter LASER close 06:31:13 Received message from Camera: op=State serial=107792 06:31:13 GetSingleValue result=40 Value=cccccccc 06:31:13 SkyScan query 06:31:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:31:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:14 Parameters OK 06:31:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:14 Set A/D data flow result=40 06:31:14 Set A/D channel type result=40 06:31:14 Set A/D encoding result=40 06:31:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:14 Set channel filter=0.000000e+000 result=40 06:31:14 Config A/D Result=40 06:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:14 Get A/D filter: -9.255963e+061 result=40 06:31:14 Get A/D value=-858993460 result=40 06:31:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:14 Parameters OK 06:31:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:14 Set A/D data flow result=40 06:31:14 Set A/D channel type result=40 06:31:14 Set A/D encoding result=40 06:31:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:14 Set channel filter=0.000000e+000 result=40 06:31:14 Config A/D Result=40 06:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:14 Get A/D filter: -9.255963e+061 result=40 06:31:14 Get A/D value=-858993460 result=40 06:31:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:14 Aux= 06:31:14 Message to Camera, serial 107792 queued 06:31:51 Received message from Master: op=PointingHead serial=107805 06:31:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:31:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:31:51 Point started: ret=0 06:31:51 point_skyscan result=0 06:31:52 Check angles 06:31:52 SkyScan query 06:31:52 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 06:31:52 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 06:31:53 Check angles 06:31:53 SkyScan query 06:31:53 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 06:31:53 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 06:31:53 Check angles 06:31:53 SkyScan query 06:31:54 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 06:31:54 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 06:31:54 Check angles 06:31:54 SkyScan query 06:31:55 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 06:31:55 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 06:31:55 Check angles 06:31:55 SkyScan query 06:31:55 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:31:55 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:31:56 Check angles 06:31:56 SkyScan query 06:31:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:31:56 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:31:56 Message to Master queued w/err=0: serial=107805 error=0 06:32:01 Received message from Master: op=Filter serial=107806 06:32:01 Color wheel filter change from 0 to 0 06:32:01 FLIGetFilterPos err=0 currentPosition=0 06:32:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:01 Filter is already there-color wheel unchanged 06:32:01 Received message from Master: op=Shutter serial=107807 06:32:01 Shutter LASER close 06:32:01 Received message from Camera: op=State serial=107809 06:32:01 GetSingleValue result=40 Value=cccccccc 06:32:01 SkyScan query 06:32:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:32:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:02 Parameters OK 06:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:02 Set A/D data flow result=40 06:32:02 Set A/D channel type result=40 06:32:02 Set A/D encoding result=40 06:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:02 Set channel filter=0.000000e+000 result=40 06:32:02 Config A/D Result=40 06:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:02 Get A/D filter: -9.255963e+061 result=40 06:32:02 Get A/D value=-858993460 result=40 06:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:02 Parameters OK 06:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:02 Set A/D data flow result=40 06:32:02 Set A/D channel type result=40 06:32:02 Set A/D encoding result=40 06:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:02 Set channel filter=0.000000e+000 result=40 06:32:02 Config A/D Result=40 06:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:02 Get A/D filter: -9.255963e+061 result=40 06:32:02 Get A/D value=-858993460 result=40 06:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:02 Aux= 06:32:02 Message to Camera, serial 107809 queued 06:32:39 Received message from Master: op=PointingHead serial=107822 06:32:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:32:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:32:39 Point started: ret=0 06:32:39 point_skyscan result=0 06:32:40 Check angles 06:32:40 SkyScan query 06:32:40 SkyScan query done: ret=0 az=152.97<-10198 ze=8.625<-11425 Statuses=0009 0009 06:32:40 Msec=0 True Az=152.97 Ze=8.625 Az status=0009 Ze status=0009 06:32:41 Check angles 06:32:41 SkyScan query 06:32:41 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.33<-12822 Statuses=0009 0009 06:32:41 Msec=750 True Az=135.405 Ze=-12.33 Az status=0009 Ze status=0009 06:32:41 Check angles 06:32:41 SkyScan query 06:32:42 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.3<-14220 Statuses=0009 0009 06:32:42 Msec=1500 True Az=117.93 Ze=-33.3 Az status=0009 Ze status=0009 06:32:42 Check angles 06:32:42 SkyScan query 06:32:43 SkyScan query done: ret=0 az=100.605<-6707 ze=-51.54<-15436 Statuses=0009 0009 06:32:43 Msec=2250 True Az=100.605 Ze=-51.54 Az status=0009 Ze status=0009 06:32:43 Check angles 06:32:43 SkyScan query 06:32:43 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 06:32:43 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 06:32:44 Check angles 06:32:44 SkyScan query 06:32:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:32:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:32:44 Message to Master queued w/err=0: serial=107822 error=0 06:32:49 Received message from Master: op=Filter serial=107823 06:32:49 Color wheel filter change from 0 to 0 06:32:49 FLIGetFilterPos err=0 currentPosition=0 06:32:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:49 Filter is already there-color wheel unchanged 06:32:49 Received message from Master: op=Shutter serial=107824 06:32:49 Shutter LASER close 06:32:49 Received message from Camera: op=State serial=107826 06:32:49 GetSingleValue result=40 Value=cccccccc 06:32:49 SkyScan query 06:32:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:32:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:50 Parameters OK 06:32:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:50 Set A/D data flow result=40 06:32:50 Set A/D channel type result=40 06:32:50 Set A/D encoding result=40 06:32:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:50 Set channel filter=0.000000e+000 result=40 06:32:50 Config A/D Result=40 06:32:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:50 Get A/D filter: -9.255963e+061 result=40 06:32:50 Get A/D value=-858993460 result=40 06:32:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:50 Parameters OK 06:32:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:50 Set A/D data flow result=40 06:32:50 Set A/D channel type result=40 06:32:50 Set A/D encoding result=40 06:32:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:50 Set channel filter=0.000000e+000 result=40 06:32:50 Config A/D Result=40 06:32:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:50 Get A/D filter: -9.255963e+061 result=40 06:32:50 Get A/D value=-858993460 result=40 06:32:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:50 Aux= 06:32:50 Message to Camera, serial 107826 queued 06:33:27 Received message from Master: op=PointingHead serial=107839 06:33:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:33:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:33:27 Point started: ret=0 06:33:27 point_skyscan result=0 06:33:28 Check angles 06:33:28 SkyScan query 06:33:28 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.3<-17420 Statuses=0009 0009 06:33:28 Msec=0 True Az=108.99 Ze=-81.3 Az status=0009 Ze status=0009 06:33:29 Check angles 06:33:29 SkyScan query 06:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 06:33:29 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 06:33:29 Check angles 06:33:29 SkyScan query 06:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 06:33:30 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 06:33:30 Check angles 06:33:30 SkyScan query 06:33:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 06:33:31 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 06:33:31 Check angles 06:33:31 SkyScan query 06:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.99<-23066 Statuses=0008 0009 06:33:32 Msec=3000 True Az=112.995 Ze=-165.99 Az status=0008 Ze status=0009 06:33:32 Check angles 06:33:32 SkyScan query 06:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:33:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:33:32 Message to Master queued w/err=0: serial=107839 error=0 06:33:37 Received message from Master: op=Filter serial=107840 06:33:37 Color wheel filter change from 0 to 0 06:33:37 FLIGetFilterPos err=0 currentPosition=0 06:33:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:37 Filter is already there-color wheel unchanged 06:33:37 Received message from Master: op=Shutter serial=107841 06:33:37 Shutter LASER open 06:33:38 Received message from Camera: op=State serial=107843 06:33:38 GetSingleValue result=40 Value=cccccccc 06:33:38 SkyScan query 06:33:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:33:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:38 Parameters OK 06:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:38 Set A/D data flow result=40 06:33:38 Set A/D channel type result=40 06:33:38 Set A/D encoding result=40 06:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:38 Set channel filter=0.000000e+000 result=40 06:33:38 Config A/D Result=40 06:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:38 Get A/D filter: -9.255963e+061 result=40 06:33:38 Get A/D value=-858993460 result=40 06:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:38 Parameters OK 06:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:38 Set A/D data flow result=40 06:33:38 Set A/D channel type result=40 06:33:38 Set A/D encoding result=40 06:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:38 Set channel filter=0.000000e+000 result=40 06:33:38 Config A/D Result=40 06:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:38 Get A/D filter: -9.255963e+061 result=40 06:33:38 Get A/D value=-858993460 result=40 06:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:38 Aux= 06:33:38 Message to Camera, serial 107843 queued 06:33:47 Received message from Master: op=Shutter serial=107853 06:33:47 Shutter LASER close 06:33:47 Received message from Master: op=PointingHead serial=107857 06:33:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:33:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:33:47 Point started: ret=0 06:33:47 point_skyscan result=0 06:33:48 Check angles 06:33:48 SkyScan query 06:33:49 SkyScan query done: ret=0 az=89.67<-5978 ze=157.035<-1531 Statuses=0009 0009 06:33:49 Msec=0 True Az=89.67 Ze=157.035 Az status=0009 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:50 SkyScan query done: ret=0 az=72.24<-4816 ze=136.08<-2928 Statuses=0009 0009 06:33:50 Msec=750 True Az=72.24 Ze=136.08 Az status=0009 Ze status=0009 06:33:50 Check angles 06:33:50 SkyScan query 06:33:50 SkyScan query done: ret=0 az=54.795<-3653 ze=115.155<-4323 Statuses=0009 0009 06:33:50 Msec=1500 True Az=54.795 Ze=115.155 Az status=0009 Ze status=0009 06:33:50 Check angles 06:33:50 SkyScan query 06:33:51 SkyScan query done: ret=0 az=40.875<-2725 ze=94.155<-5723 Statuses=0009 0009 06:33:51 Msec=2250 True Az=40.875 Ze=94.155 Az status=0009 Ze status=0009 06:33:51 Check angles 06:33:51 SkyScan query 06:33:52 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 06:33:52 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 06:33:52 Check angles 06:33:52 SkyScan query 06:33:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 06:33:53 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 06:33:53 Check angles 06:33:53 SkyScan query 06:33:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:33:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:33:53 Message to Master queued w/err=0: serial=107857 error=0 06:33:58 Received message from Master: op=Filter serial=107858 06:33:58 Color wheel filter change from 0 to 0 06:33:58 FLIGetFilterPos err=0 currentPosition=0 06:33:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:58 Filter is already there-color wheel unchanged 06:33:58 Received message from Master: op=Shutter serial=107859 06:33:58 Shutter LASER close 06:33:59 Received message from Camera: op=State serial=107861 06:33:59 GetSingleValue result=40 Value=cccccccc 06:33:59 SkyScan query 06:33:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:33:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:59 Parameters OK 06:33:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:59 Set A/D data flow result=40 06:33:59 Set A/D channel type result=40 06:33:59 Set A/D encoding result=40 06:33:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:59 Set channel filter=0.000000e+000 result=40 06:33:59 Config A/D Result=40 06:33:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:59 Get A/D filter: -9.255963e+061 result=40 06:33:59 Get A/D value=-858993460 result=40 06:33:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:59 Parameters OK 06:33:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:59 Set A/D data flow result=40 06:33:59 Set A/D channel type result=40 06:33:59 Set A/D encoding result=40 06:33:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:59 Set channel filter=0.000000e+000 result=40 06:33:59 Config A/D Result=40 06:33:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:59 Get A/D filter: -9.255963e+061 result=40 06:33:59 Get A/D value=-858993460 result=40 06:33:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:59 Aux= 06:33:59 Message to Camera, serial 107861 queued 06:34:36 Received message from Master: op=PointingHead serial=107874 06:34:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:34:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:34:36 Point started: ret=0 06:34:36 point_skyscan result=0 06:34:37 Check angles 06:34:37 SkyScan query 06:34:38 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 06:34:38 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 06:34:38 Check angles 06:34:38 SkyScan query 06:34:38 SkyScan query done: ret=0 az=81.63<-5442 ze=66.495<-7567 Statuses=0009 0008 06:34:38 Msec=750 True Az=81.63 Ze=66.495 Az status=0009 Ze status=0008 06:34:39 Check angles 06:34:39 SkyScan query 06:34:39 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 06:34:39 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 06:34:39 Check angles 06:34:39 SkyScan query 06:34:40 SkyScan query done: ret=0 az=117.39<-7826 ze=66.495<-7567 Statuses=0009 0008 06:34:40 Msec=2250 True Az=117.39 Ze=66.495 Az status=0009 Ze status=0008 06:34:40 Check angles 06:34:40 SkyScan query 06:34:41 SkyScan query done: ret=0 az=135.195<-9013 ze=66.495<-7567 Statuses=0009 0008 06:34:41 Msec=3000 True Az=135.195 Ze=66.495 Az status=0009 Ze status=0008 06:34:41 Check angles 06:34:41 SkyScan query 06:34:42 SkyScan query done: ret=0 az=152.655<-10177 ze=66.495<-7567 Statuses=0009 0008 06:34:42 Msec=3750 True Az=152.655 Ze=66.495 Az status=0009 Ze status=0008 06:34:42 Check angles 06:34:42 SkyScan query 06:34:42 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 06:34:42 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 06:34:42 Message to Master queued w/err=0: serial=107874 error=0 06:34:47 Received message from Master: op=Filter serial=107875 06:34:47 Color wheel filter change from 0 to 0 06:34:47 FLIGetFilterPos err=0 currentPosition=0 06:34:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:47 Filter is already there-color wheel unchanged 06:34:47 Received message from Master: op=Shutter serial=107876 06:34:47 Shutter LASER close 06:34:47 Received message from Camera: op=State serial=107878 06:34:47 GetSingleValue result=40 Value=cccccccc 06:34:47 SkyScan query 06:34:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:34:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:48 Parameters OK 06:34:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:48 Set A/D data flow result=40 06:34:48 Set A/D channel type result=40 06:34:48 Set A/D encoding result=40 06:34:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:48 Set channel filter=0.000000e+000 result=40 06:34:48 Config A/D Result=40 06:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:48 Get A/D filter: -9.255963e+061 result=40 06:34:48 Get A/D value=-858993460 result=40 06:34:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:48 Parameters OK 06:34:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:48 Set A/D data flow result=40 06:34:48 Set A/D channel type result=40 06:34:48 Set A/D encoding result=40 06:34:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:48 Set channel filter=0.000000e+000 result=40 06:34:48 Config A/D Result=40 06:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:48 Get A/D filter: -9.255963e+061 result=40 06:34:48 Get A/D value=-858993460 result=40 06:34:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:48 Aux= 06:34:48 Message to Camera, serial 107878 queued 06:35:25 Received message from Master: op=PointingHead serial=107891 06:35:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:35:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:35:25 Point started: ret=0 06:35:25 point_skyscan result=0 06:35:26 Check angles 06:35:26 SkyScan query 06:35:27 SkyScan query done: ret=0 az=135.09<-9006 ze=36.84<-9544 Statuses=0009 0009 06:35:27 Msec=0 True Az=135.09 Ze=36.84 Az status=0009 Ze status=0009 06:35:27 Check angles 06:35:27 SkyScan query 06:35:27 SkyScan query done: ret=0 az=117.645<-7843 ze=15.87<-10942 Statuses=0009 0009 06:35:27 Msec=750 True Az=117.645 Ze=15.87 Az status=0009 Ze status=0009 06:35:28 Check angles 06:35:28 SkyScan query 06:35:28 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.475<-12365 Statuses=0009 0009 06:35:28 Msec=1500 True Az=99.885 Ze=-5.475 Az status=0009 Ze status=0009 06:35:28 Check angles 06:35:28 SkyScan query 06:35:29 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.43<-13762 Statuses=0009 0009 06:35:29 Msec=2250 True Az=82.275 Ze=-26.43 Az status=0009 Ze status=0009 06:35:29 Check angles 06:35:29 SkyScan query 06:35:30 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 06:35:30 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 06:35:30 Check angles 06:35:30 SkyScan query 06:35:30 SkyScan query done: ret=0 az=47.4<-3160 ze=-38.535<-14569 Statuses=0009 0008 [UTC 2018-12-13 06:35:30] 06:35:30 Msec=3750 True Az=47.4 Ze=-38.535 Az status=0009 Ze status=0008 06:35:31 Check angles 06:35:31 SkyScan query 06:35:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:35:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:35:31 Message to Master queued w/err=0: serial=107891 error=0 06:35:36 Received message from Master: op=Filter serial=107892 06:35:36 Color wheel filter change from 0 to 0 06:35:36 FLIGetFilterPos err=0 currentPosition=0 06:35:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:36 Filter is already there-color wheel unchanged 06:35:36 Received message from Master: op=Shutter serial=107893 06:35:36 Shutter LASER close 06:35:36 Received message from Camera: op=State serial=107895 06:35:36 GetSingleValue result=40 Value=cccccccc 06:35:36 SkyScan query 06:35:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:35:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:37 Parameters OK 06:35:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:37 Set A/D data flow result=40 06:35:37 Set A/D channel type result=40 06:35:37 Set A/D encoding result=40 06:35:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:37 Set channel filter=0.000000e+000 result=40 06:35:37 Config A/D Result=40 06:35:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:37 Get A/D filter: -9.255963e+061 result=40 06:35:37 Get A/D value=-858993460 result=40 06:35:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:37 Parameters OK 06:35:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:37 Set A/D data flow result=40 06:35:37 Set A/D channel type result=40 06:35:37 Set A/D encoding result=40 06:35:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:37 Set channel filter=0.000000e+000 result=40 06:35:37 Config A/D Result=40 06:35:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:37 Get A/D filter: -9.255963e+061 result=40 06:35:37 Get A/D value=-858993460 result=40 06:35:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:37 Aux= 06:35:37 Message to Camera, serial 107895 queued [UTC 2018-12-13 06:35:52] 06:36:14 Received message from Master: op=PointingHead serial=107908 06:36:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:36:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:36:14 Point started: ret=0 06:36:14 point_skyscan result=0 06:36:15 Check angles 06:36:15 SkyScan query 06:36:15 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.4<-16560 Statuses=0009 0009 06:36:15 Msec=0 True Az=64.215 Ze=-68.4 Az status=0009 Ze status=0009 06:36:16 Check angles 06:36:16 SkyScan query 06:36:16 SkyScan query done: ret=0 az=81.525<-5435 ze=-89.4<-17960 Statuses=0009 0009 06:36:16 Msec=750 True Az=81.525 Ze=-89.4 Az status=0009 Ze status=0009 06:36:16 Check angles 06:36:16 SkyScan query 06:36:17 SkyScan query done: ret=0 az=99.03<-6602 ze=-110.34<-19356 Statuses=0009 0009 06:36:17 Msec=1500 True Az=99.03 Ze=-110.34 Az status=0009 Ze status=0009 06:36:17 Check angles 06:36:17 SkyScan query 06:36:18 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.28<-20752 Statuses=0009 0009 06:36:18 Msec=2250 True Az=116.64 Ze=-131.28 Az status=0009 Ze status=0009 06:36:18 Check angles 06:36:18 SkyScan query 06:36:18 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 06:36:18 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 06:36:19 Check angles 06:36:19 SkyScan query 06:36:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:36:19 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:36:19 Message to Master queued w/err=0: serial=107908 error=0 06:36:24 Received message from Master: op=Filter serial=107909 06:36:24 Color wheel filter change from 0 to 0 06:36:24 FLIGetFilterPos err=0 currentPosition=0 06:36:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:24 Filter is already there-color wheel unchanged 06:36:24 Received message from Master: op=Shutter serial=107910 06:36:24 Shutter LASER close 06:36:24 Received message from Camera: op=State serial=107912 06:36:24 GetSingleValue result=40 Value=cccccccc 06:36:24 SkyScan query 06:36:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:36:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:25 Parameters OK 06:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:25 Set A/D data flow result=40 06:36:25 Set A/D channel type result=40 06:36:25 Set A/D encoding result=40 06:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:25 Set channel filter=0.000000e+000 result=40 06:36:25 Config A/D Result=40 06:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:25 Get A/D filter: -9.255963e+061 result=40 06:36:25 Get A/D value=-858993460 result=40 06:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:25 Parameters OK 06:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:25 Set A/D data flow result=40 06:36:25 Set A/D channel type result=40 06:36:25 Set A/D encoding result=40 06:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:25 Set channel filter=0.000000e+000 result=40 06:36:25 Config A/D Result=40 06:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:25 Get A/D filter: -9.255963e+061 result=40 06:36:25 Get A/D value=-858993460 result=40 06:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:25 Aux= 06:36:25 Message to Camera, serial 107912 queued 06:37:02 Received message from Master: op=PointingHead serial=107925 06:37:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:37:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:37:02 Point started: ret=0 06:37:02 point_skyscan result=0 06:37:03 Check angles 06:37:03 SkyScan query 06:37:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 06:37:04 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 06:37:04 Check angles 06:37:04 SkyScan query 06:37:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:37:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:37:04 Message to Master queued w/err=0: serial=107925 error=0 06:37:09 Received message from Master: op=Filter serial=107926 06:37:09 Color wheel filter change from 0 to 0 06:37:09 FLIGetFilterPos err=0 currentPosition=0 06:37:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:09 Filter is already there-color wheel unchanged 06:37:09 Received message from Master: op=Shutter serial=107927 06:37:09 Shutter LASER open 06:37:10 Received message from Camera: op=State serial=107929 06:37:10 GetSingleValue result=40 Value=cccccccc 06:37:10 SkyScan query 06:37:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:37:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:10 Parameters OK 06:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:10 Set A/D data flow result=40 06:37:10 Set A/D channel type result=40 06:37:10 Set A/D encoding result=40 06:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:10 Set channel filter=0.000000e+000 result=40 06:37:10 Config A/D Result=40 06:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:10 Get A/D filter: -9.255963e+061 result=40 06:37:10 Get A/D value=-858993460 result=40 06:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:10 Parameters OK 06:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:10 Set A/D data flow result=40 06:37:10 Set A/D channel type result=40 06:37:10 Set A/D encoding result=40 06:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:10 Set channel filter=0.000000e+000 result=40 06:37:10 Config A/D Result=40 06:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:10 Get A/D filter: -9.255963e+061 result=40 06:37:10 Get A/D value=-858993460 result=40 06:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:10 Aux= 06:37:10 Message to Camera, serial 107929 queued 06:37:19 Received message from Master: op=Shutter serial=107939 06:37:19 Shutter LASER close 06:37:19 Received message from Master: op=PointingHead serial=107943 06:37:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:37:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:37:20 Point started: ret=0 06:37:20 point_skyscan result=0 06:37:20 Check angles 06:37:20 SkyScan query 06:37:21 SkyScan query done: ret=0 az=136.575<-9105 ze=-142.77<-21518 Statuses=0009 0009 06:37:21 Msec=0 True Az=136.575 Ze=-142.77 Az status=0009 Ze status=0009 06:37:21 Check angles 06:37:21 SkyScan query 06:37:22 SkyScan query done: ret=0 az=154.335<-10289 ze=-121.32<-20088 Statuses=0009 0009 06:37:22 Msec=750 True Az=154.335 Ze=-121.32 Az status=0009 Ze status=0009 06:37:22 Check angles 06:37:22 SkyScan query 06:37:22 SkyScan query done: ret=0 az=171.915<-11461 ze=-100.365<-18691 Statuses=0009 0009 06:37:22 Msec=1500 True Az=171.915 Ze=-100.365 Az status=0009 Ze status=0009 06:37:23 Check angles 06:37:23 SkyScan query 06:37:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.47<-17298 Statuses=0008 0009 06:37:23 Msec=2250 True Az=176.01 Ze=-79.47 Az status=0008 Ze status=0009 06:37:23 Check angles 06:37:23 SkyScan query 06:37:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.485<-15899 Statuses=0008 0009 06:37:24 Msec=3000 True Az=176.01 Ze=-58.485 Az status=0008 Ze status=0009 06:37:24 Check angles 06:37:24 SkyScan query 06:37:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:37:25 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:37:25 Message to Master queued w/err=0: serial=107943 error=0 06:37:30 Received message from Master: op=Filter serial=107944 06:37:30 Color wheel filter change from 0 to 0 06:37:30 FLIGetFilterPos err=0 currentPosition=0 06:37:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:30 Filter is already there-color wheel unchanged 06:37:30 Received message from Master: op=Shutter serial=107945 06:37:30 Shutter LASER close 06:37:30 Received message from Camera: op=State serial=107947 06:37:30 GetSingleValue result=40 Value=cccccccc 06:37:30 SkyScan query 06:37:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:37:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:31 Parameters OK 06:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:31 Set A/D data flow result=40 06:37:31 Set A/D channel type result=40 06:37:31 Set A/D encoding result=40 06:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:31 Set channel filter=0.000000e+000 result=40 06:37:31 Config A/D Result=40 06:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:31 Get A/D filter: -9.255963e+061 result=40 06:37:31 Get A/D value=-858993460 result=40 06:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:31 Parameters OK 06:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:31 Set A/D data flow result=40 06:37:31 Set A/D channel type result=40 06:37:31 Set A/D encoding result=40 06:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:31 Set channel filter=0.000000e+000 result=40 06:37:31 Config A/D Result=40 06:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:31 Get A/D filter: -9.255963e+061 result=40 06:37:31 Get A/D value=-858993460 result=40 06:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:31 Aux= 06:37:31 Message to Camera, serial 107947 queued 06:38:07 Received message from Master: op=PointingHead serial=107960 06:38:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:38:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:38:08 Point started: ret=0 06:38:08 point_skyscan result=0 06:38:08 Check angles 06:38:08 SkyScan query 06:38:09 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.855<-13457 Statuses=0009 0009 06:38:09 Msec=0 True Az=152.97 Ze=-21.855 Az status=0009 Ze status=0009 06:38:09 Check angles 06:38:09 SkyScan query 06:38:10 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.375<-12025 Statuses=0009 0009 06:38:10 Msec=750 True Az=135.255 Ze=-0.375 Az status=0009 Ze status=0009 06:38:10 Check angles 06:38:10 SkyScan query 06:38:11 SkyScan query done: ret=0 az=117.375<-7825 ze=20.97<-10602 Statuses=0009 0009 06:38:11 Msec=1500 True Az=117.375 Ze=20.97 Az status=0009 Ze status=0009 06:38:11 Check angles 06:38:11 SkyScan query 06:38:11 SkyScan query done: ret=0 az=99.93<-6662 ze=41.94<-9204 Statuses=0009 0009 06:38:11 Msec=2250 True Az=99.93 Ze=41.94 Az status=0009 Ze status=0009 06:38:12 Check angles 06:38:12 SkyScan query 06:38:12 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:38:12 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:38:12 Check angles 06:38:12 SkyScan query 06:38:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:38:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:38:13 Message to Master queued w/err=0: serial=107960 error=0 06:38:18 Received message from Master: op=Filter serial=107961 06:38:18 Color wheel filter change from 0 to 0 06:38:18 FLIGetFilterPos err=0 currentPosition=0 06:38:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:18 Filter is already there-color wheel unchanged 06:38:18 Received message from Master: op=Shutter serial=107962 06:38:18 Shutter LASER close 06:38:18 Received message from Camera: op=State serial=107964 06:38:18 GetSingleValue result=40 Value=cccccccc 06:38:18 SkyScan query 06:38:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:38:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:19 Parameters OK 06:38:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:19 Set A/D data flow result=40 06:38:19 Set A/D channel type result=40 06:38:19 Set A/D encoding result=40 06:38:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:19 Set channel filter=0.000000e+000 result=40 06:38:19 Config A/D Result=40 06:38:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:19 Get A/D filter: -9.255963e+061 result=40 06:38:19 Get A/D value=-858993460 result=40 06:38:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:19 Parameters OK 06:38:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:19 Set A/D data flow result=40 06:38:19 Set A/D channel type result=40 06:38:19 Set A/D encoding result=40 06:38:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:19 Set channel filter=0.000000e+000 result=40 06:38:19 Config A/D Result=40 06:38:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:19 Get A/D filter: -9.255963e+061 result=40 06:38:19 Get A/D value=-858993460 result=40 06:38:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:19 Aux= 06:38:19 Message to Camera, serial 107964 queued 06:38:55 Received message from Master: op=PointingHead serial=107977 06:38:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:38:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:38:56 Point started: ret=0 06:38:56 point_skyscan result=0 06:38:57 Check angles 06:38:57 SkyScan query 06:38:57 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 06:38:57 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 06:38:57 Check angles 06:38:57 SkyScan query 06:38:58 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 06:38:58 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 06:38:58 Check angles 06:38:58 SkyScan query 06:38:59 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 06:38:59 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 06:38:59 Check angles 06:38:59 SkyScan query 06:38:59 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 06:38:59 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 06:39:00 Check angles 06:39:00 SkyScan query 06:39:00 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:39:00 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:39:00 Check angles 06:39:00 SkyScan query 06:39:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:39:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:39:01 Message to Master queued w/err=0: serial=107977 error=0 06:39:06 Received message from Master: op=Filter serial=107978 06:39:06 Color wheel filter change from 0 to 0 06:39:06 FLIGetFilterPos err=0 currentPosition=0 06:39:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:06 Filter is already there-color wheel unchanged 06:39:06 Received message from Master: op=Shutter serial=107979 06:39:06 Shutter LASER close 06:39:06 Received message from Camera: op=State serial=107981 06:39:06 GetSingleValue result=40 Value=cccccccc 06:39:06 SkyScan query 06:39:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:39:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:07 Parameters OK 06:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:07 Set A/D data flow result=40 06:39:07 Set A/D channel type result=40 06:39:07 Set A/D encoding result=40 06:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:07 Set channel filter=0.000000e+000 result=40 06:39:07 Config A/D Result=40 06:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:07 Get A/D filter: -9.255963e+061 result=40 06:39:07 Get A/D value=-858993460 result=40 06:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:07 Parameters OK 06:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:07 Set A/D data flow result=40 06:39:07 Set A/D channel type result=40 06:39:07 Set A/D encoding result=40 06:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:07 Set channel filter=0.000000e+000 result=40 06:39:07 Config A/D Result=40 06:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:07 Get A/D filter: -9.255963e+061 result=40 06:39:07 Get A/D value=-858993460 result=40 06:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:07 Aux= 06:39:07 Message to Camera, serial 107981 queued 06:39:44 Received message from Master: op=PointingHead serial=107994 06:39:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:39:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:39:44 Point started: ret=0 06:39:44 point_skyscan result=0 06:39:45 Check angles 06:39:45 SkyScan query 06:39:45 SkyScan query done: ret=0 az=152.925<-10195 ze=8.58<-11428 Statuses=0009 0009 06:39:45 Msec=0 True Az=152.925 Ze=8.58 Az status=0009 Ze status=0009 06:39:45 Check angles 06:39:45 SkyScan query 06:39:46 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.39<-12826 Statuses=0009 0009 06:39:46 Msec=750 True Az=135.42 Ze=-12.39 Az status=0009 Ze status=0009 06:39:46 Check angles 06:39:46 SkyScan query 06:39:47 SkyScan query done: ret=0 az=117.9<-7860 ze=-33.345<-14223 Statuses=0009 0009 06:39:47 Msec=1500 True Az=117.9 Ze=-33.345 Az status=0009 Ze status=0009 06:39:47 Check angles 06:39:47 SkyScan query 06:39:47 SkyScan query done: ret=0 az=100.515<-6701 ze=-51.54<-15436 Statuses=0009 0009 06:39:47 Msec=2250 True Az=100.515 Ze=-51.54 Az status=0009 Ze status=0009 06:39:48 Check angles 06:39:48 SkyScan query 06:39:48 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 06:39:48 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 06:39:48 Check angles 06:39:48 SkyScan query 06:39:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:39:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:39:49 Message to Master queued w/err=0: serial=107994 error=0 06:39:54 Received message from Master: op=Filter serial=107995 06:39:54 Color wheel filter change from 0 to 0 06:39:54 FLIGetFilterPos err=0 currentPosition=0 06:39:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:54 Filter is already there-color wheel unchanged 06:39:54 Received message from Master: op=Shutter serial=107996 06:39:54 Shutter LASER close 06:39:54 Received message from Camera: op=State serial=107998 06:39:54 GetSingleValue result=40 Value=cccccccc 06:39:54 SkyScan query 06:39:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:39:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:55 Parameters OK 06:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:55 Set A/D data flow result=40 06:39:55 Set A/D channel type result=40 06:39:55 Set A/D encoding result=40 06:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:55 Set channel filter=0.000000e+000 result=40 06:39:55 Config A/D Result=40 06:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:55 Get A/D filter: -9.255963e+061 result=40 06:39:55 Get A/D value=-858993460 result=40 06:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:55 Parameters OK 06:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:55 Set A/D data flow result=40 06:39:55 Set A/D channel type result=40 06:39:55 Set A/D encoding result=40 06:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:55 Set channel filter=0.000000e+000 result=40 06:39:55 Config A/D Result=40 06:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:55 Get A/D filter: -9.255963e+061 result=40 06:39:55 Get A/D value=-858993460 result=40 06:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:55 Aux= 06:39:55 Message to Camera, serial 107998 queued 06:40:31 Received message from Master: op=PointingHead serial=108010 06:40:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:40:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:40:31 Point started: ret=0 06:40:31 point_skyscan result=0 06:40:32 Check angles 06:40:32 SkyScan query 06:40:32 SkyScan query done: ret=0 az=108.81<-7254 ze=-80.97<-17398 Statuses=0009 0009 06:40:32 Msec=0 True Az=108.81 Ze=-80.97 Az status=0009 Ze status=0009 06:40:33 Check angles 06:40:33 SkyScan query 06:40:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.94<-18796 Statuses=0008 0009 06:40:33 Msec=750 True Az=112.995 Ze=-101.94 Az status=0008 Ze status=0009 06:40:33 Check angles 06:40:33 SkyScan query 06:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 06:40:34 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 06:40:34 Check angles 06:40:34 SkyScan query 06:40:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 06:40:35 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 06:40:35 Check angles 06:40:35 SkyScan query 06:40:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.255<-23017 Statuses=0008 0009 06:40:35 Msec=3000 True Az=112.995 Ze=-165.255 Az status=0008 Ze status=0009 06:40:36 Check angles 06:40:36 SkyScan query 06:40:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:40:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:40:36 Message to Master queued w/err=0: serial=108010 error=0 06:40:41 Received message from Master: op=Filter serial=108011 06:40:41 Color wheel filter change from 0 to 0 06:40:41 FLIGetFilterPos err=0 currentPosition=0 06:40:41 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:41 Filter is already there-color wheel unchanged 06:40:41 Received message from Master: op=Shutter serial=108012 06:40:41 Shutter LASER open 06:40:42 Received message from Camera: op=State serial=108014 06:40:42 GetSingleValue result=40 Value=cccccccc 06:40:42 SkyScan query 06:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:40:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:42 Parameters OK 06:40:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:42 Set A/D data flow result=40 06:40:42 Set A/D channel type result=40 06:40:42 Set A/D encoding result=40 06:40:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:42 Set channel filter=0.000000e+000 result=40 06:40:42 Config A/D Result=40 06:40:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:42 Get A/D filter: -9.255963e+061 result=40 06:40:42 Get A/D value=-858993460 result=40 06:40:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:42 Parameters OK 06:40:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:42 Set A/D data flow result=40 06:40:42 Set A/D channel type result=40 06:40:42 Set A/D encoding result=40 06:40:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:42 Set channel filter=0.000000e+000 result=40 06:40:42 Config A/D Result=40 06:40:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:42 Get A/D filter: -9.255963e+061 result=40 06:40:42 Get A/D value=-858993460 result=40 06:40:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:42 Aux= 06:40:42 Message to Camera, serial 108014 queued 06:40:51 Received message from Master: op=Shutter serial=108024 06:40:51 Shutter LASER close 06:40:51 Received message from Master: op=PointingHead serial=108028 06:40:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:40:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:40:51 Point started: ret=0 06:40:51 point_skyscan result=0 06:40:52 Check angles 06:40:52 SkyScan query 06:40:53 SkyScan query done: ret=0 az=89.475<-5965 ze=156.69<-1554 Statuses=0009 0009 06:40:53 Msec=0 True Az=89.475 Ze=156.69 Az status=0009 Ze status=0009 06:40:53 Check angles 06:40:53 SkyScan query 06:40:53 SkyScan query done: ret=0 az=71.955<-4797 ze=135.795<-2947 Statuses=0009 0009 06:40:53 Msec=750 True Az=71.955 Ze=135.795 Az status=0009 Ze status=0009 06:40:54 Check angles 06:40:54 SkyScan query 06:40:54 SkyScan query done: ret=0 az=54.675<-3645 ze=114.84<-4344 Statuses=0009 0009 06:40:54 Msec=1500 True Az=54.675 Ze=114.84 Az status=0009 Ze status=0009 06:40:54 Check angles 06:40:54 SkyScan query 06:40:55 SkyScan query done: ret=0 az=40.905<-2727 ze=93.9<-5740 Statuses=0009 0009 06:40:55 Msec=2250 True Az=40.905 Ze=93.9 Az status=0009 Ze status=0009 06:40:55 Check angles 06:40:55 SkyScan query 06:40:56 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 06:40:56 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 06:40:56 Check angles 06:40:56 SkyScan query 06:40:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 06:40:56 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 06:40:57 Check angles 06:40:57 SkyScan query 06:40:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:40:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:40:57 Message to Master queued w/err=0: serial=108028 error=0 06:41:02 Received message from Master: op=Filter serial=108029 06:41:02 Color wheel filter change from 0 to 0 06:41:02 FLIGetFilterPos err=0 currentPosition=0 06:41:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:02 Filter is already there-color wheel unchanged 06:41:02 Received message from Master: op=Shutter serial=108030 06:41:02 Shutter LASER close 06:41:02 Received message from Camera: op=State serial=108032 06:41:02 GetSingleValue result=40 Value=cccccccc 06:41:02 SkyScan query 06:41:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:41:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:03 Parameters OK 06:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:03 Set A/D data flow result=40 06:41:03 Set A/D channel type result=40 06:41:03 Set A/D encoding result=40 06:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:03 Set channel filter=0.000000e+000 result=40 06:41:03 Config A/D Result=40 06:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:03 Get A/D filter: -9.255963e+061 result=40 06:41:03 Get A/D value=-858993460 result=40 06:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:03 Parameters OK 06:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:03 Set A/D data flow result=40 06:41:03 Set A/D channel type result=40 06:41:03 Set A/D encoding result=40 06:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:03 Set channel filter=0.000000e+000 result=40 06:41:03 Config A/D Result=40 06:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:03 Get A/D filter: -9.255963e+061 result=40 06:41:03 Get A/D value=-858993460 result=40 06:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:03 Aux= 06:41:03 Message to Camera, serial 108032 queued 06:41:40 Received message from Master: op=PointingHead serial=108045 06:41:40 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:41:40 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:41:40 Point started: ret=0 06:41:40 point_skyscan result=0 06:41:41 Check angles 06:41:41 SkyScan query 06:41:42 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 06:41:42 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 06:41:42 Check angles 06:41:42 SkyScan query 06:41:42 SkyScan query done: ret=0 az=81.105<-5407 ze=66.495<-7567 Statuses=0009 0008 06:41:42 Msec=750 True Az=81.105 Ze=66.495 Az status=0009 Ze status=0008 06:41:42 Check angles 06:41:42 SkyScan query 06:41:43 SkyScan query done: ret=0 az=98.61<-6574 ze=66.495<-7567 Statuses=0009 0008 06:41:43 Msec=1500 True Az=98.61 Ze=66.495 Az status=0009 Ze status=0008 06:41:43 Check angles 06:41:43 SkyScan query 06:41:44 SkyScan query done: ret=0 az=116.16<-7744 ze=66.495<-7567 Statuses=0009 0008 06:41:44 Msec=2250 True Az=116.16 Ze=66.495 Az status=0009 Ze status=0008 06:41:44 Check angles 06:41:44 SkyScan query 06:41:45 SkyScan query done: ret=0 az=133.74<-8916 ze=66.495<-7567 Statuses=0009 0008 06:41:45 Msec=3000 True Az=133.74 Ze=66.495 Az status=0009 Ze status=0008 06:41:45 Check angles 06:41:45 SkyScan query 06:41:45 SkyScan query done: ret=0 az=151.05<-10070 ze=66.495<-7567 Statuses=0009 0008 06:41:45 Msec=3750 True Az=151.05 Ze=66.495 Az status=0009 Ze status=0008 06:41:45 Check angles 06:41:45 SkyScan query 06:41:46 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 06:41:46 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 06:41:46 Message to Master queued w/err=0: serial=108045 error=0 06:41:51 Received message from Master: op=Filter serial=108046 06:41:51 Color wheel filter change from 0 to 0 06:41:51 FLIGetFilterPos err=0 currentPosition=0 06:41:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:51 Filter is already there-color wheel unchanged 06:41:51 Received message from Master: op=Shutter serial=108047 06:41:51 Shutter LASER close 06:41:51 Received message from Camera: op=State serial=108049 06:41:51 GetSingleValue result=40 Value=cccccccc 06:41:51 SkyScan query 06:41:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:41:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:52 Parameters OK 06:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:52 Set A/D data flow result=40 06:41:52 Set A/D channel type result=40 06:41:52 Set A/D encoding result=40 06:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:52 Set channel filter=0.000000e+000 result=40 06:41:52 Config A/D Result=40 06:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:52 Get A/D filter: -9.255963e+061 result=40 06:41:52 Get A/D value=-858993460 result=40 06:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:52 Parameters OK 06:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:52 Set A/D data flow result=40 06:41:52 Set A/D channel type result=40 06:41:52 Set A/D encoding result=40 06:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:52 Set channel filter=0.000000e+000 result=40 06:41:52 Config A/D Result=40 06:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:52 Get A/D filter: -9.255963e+061 result=40 06:41:52 Get A/D value=-858993460 result=40 06:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:52 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:52 Aux= 06:41:52 Message to Camera, serial 108049 queued 06:42:29 Received message from Master: op=PointingHead serial=108062 06:42:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:42:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:42:29 Point started: ret=0 06:42:29 point_skyscan result=0 06:42:30 Check angles 06:42:30 SkyScan query 06:42:30 SkyScan query done: ret=0 az=135.15<-9010 ze=36.93<-9538 Statuses=0009 0009 06:42:30 Msec=0 True Az=135.15 Ze=36.93 Az status=0009 Ze status=0009 06:42:30 Check angles 06:42:30 SkyScan query 06:42:31 SkyScan query done: ret=0 az=117.33<-7822 ze=15.6<-10960 Statuses=0009 0009 06:42:31 Msec=750 True Az=117.33 Ze=15.6 Az status=0009 Ze status=0009 06:42:31 Check angles 06:42:31 SkyScan query 06:42:32 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.415<-12361 Statuses=0009 0009 06:42:32 Msec=1500 True Az=99.93 Ze=-5.415 Az status=0009 Ze status=0009 06:42:32 Check angles 06:42:32 SkyScan query 06:42:33 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.355<-13757 Statuses=0009 0009 06:42:33 Msec=2250 True Az=82.47 Ze=-26.355 Az status=0009 Ze status=0009 06:42:33 Check angles 06:42:33 SkyScan query 06:42:33 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.565<-14571 Statuses=0009 0008 06:42:33 Msec=3000 True Az=64.605 Ze=-38.565 Az status=0009 Ze status=0008 06:42:34 Check angles 06:42:34 SkyScan query 06:42:34 SkyScan query done: ret=0 az=47.175<-3145 ze=-38.535<-14569 Statuses=0009 0008 06:42:34 Msec=3750 True Az=47.175 Ze=-38.535 Az status=0009 Ze status=0008 06:42:34 Check angles 06:42:34 SkyScan query 06:42:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:42:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:42:35 Message to Master queued w/err=0: serial=108062 error=0 06:42:40 Received message from Master: op=Filter serial=108063 06:42:40 Color wheel filter change from 0 to 0 06:42:40 FLIGetFilterPos err=0 currentPosition=0 06:42:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:40 Filter is already there-color wheel unchanged 06:42:40 Received message from Master: op=Shutter serial=108064 06:42:40 Shutter LASER close 06:42:40 Received message from Camera: op=State serial=108066 06:42:40 GetSingleValue result=40 Value=cccccccc 06:42:40 SkyScan query 06:42:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:42:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:41 Parameters OK 06:42:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:41 Set A/D data flow result=40 06:42:41 Set A/D channel type result=40 06:42:41 Set A/D encoding result=40 06:42:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:41 Set channel filter=0.000000e+000 result=40 06:42:41 Config A/D Result=40 06:42:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:41 Get A/D filter: -9.255963e+061 result=40 06:42:41 Get A/D value=-858993460 result=40 06:42:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:41 Parameters OK 06:42:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:41 Set A/D data flow result=40 06:42:41 Set A/D channel type result=40 06:42:41 Set A/D encoding result=40 06:42:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:41 Set channel filter=0.000000e+000 result=40 06:42:41 Config A/D Result=40 06:42:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:41 Get A/D filter: -9.255963e+061 result=40 06:42:41 Get A/D value=-858993460 result=40 06:42:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:41 Aux= 06:42:41 Message to Camera, serial 108066 queued 06:43:17 Received message from Master: op=PointingHead serial=108079 06:43:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:43:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:43:18 Point started: ret=0 06:43:18 point_skyscan result=0 06:43:19 Check angles 06:43:19 SkyScan query 06:43:19 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.055<-16537 Statuses=0009 0009 06:43:19 Msec=0 True Az=63.885 Ze=-68.055 Az status=0009 Ze status=0009 06:43:19 Check angles 06:43:19 SkyScan query 06:43:20 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.04<-17936 Statuses=0009 0009 06:43:20 Msec=750 True Az=81.285 Ze=-89.04 Az status=0009 Ze status=0009 06:43:20 Check angles 06:43:20 SkyScan query 06:43:21 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.46<-19364 Statuses=0009 0009 06:43:21 Msec=1500 True Az=99.105 Ze=-110.46 Az status=0009 Ze status=0009 06:43:21 Check angles 06:43:21 SkyScan query 06:43:21 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.4<-20760 Statuses=0009 0009 06:43:21 Msec=2250 True Az=116.655 Ze=-131.4 Az status=0009 Ze status=0009 06:43:22 Check angles 06:43:22 SkyScan query 06:43:22 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 06:43:22 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 06:43:22 Check angles 06:43:22 SkyScan query 06:43:23 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:43:23 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:43:23 Message to Master queued w/err=0: serial=108079 error=0 06:43:28 Received message from Master: op=Filter serial=108080 06:43:28 Color wheel filter change from 0 to 0 06:43:28 FLIGetFilterPos err=0 currentPosition=0 06:43:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:28 Filter is already there-color wheel unchanged 06:43:28 Received message from Master: op=Shutter serial=108081 06:43:28 Shutter LASER close 06:43:28 Received message from Camera: op=State serial=108083 06:43:28 GetSingleValue result=40 Value=cccccccc 06:43:28 SkyScan query 06:43:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:43:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:29 Parameters OK 06:43:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:29 Set A/D data flow result=40 06:43:29 Set A/D channel type result=40 06:43:29 Set A/D encoding result=40 06:43:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:29 Set channel filter=0.000000e+000 result=40 06:43:29 Config A/D Result=40 06:43:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:29 Get A/D filter: -9.255963e+061 result=40 06:43:29 Get A/D value=-858993460 result=40 06:43:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:29 Parameters OK 06:43:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:29 Set A/D data flow result=40 06:43:29 Set A/D channel type result=40 06:43:29 Set A/D encoding result=40 06:43:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:29 Set channel filter=0.000000e+000 result=40 06:43:29 Config A/D Result=40 06:43:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:29 Get A/D filter: -9.255963e+061 result=40 06:43:29 Get A/D value=-858993460 result=40 06:43:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:29 Aux= 06:43:29 Message to Camera, serial 108083 queued 06:44:06 Received message from Master: op=PointingHead serial=108096 06:44:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:44:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:44:06 Point started: ret=0 06:44:06 point_skyscan result=0 06:44:07 Check angles 06:44:07 SkyScan query 06:44:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 06:44:07 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 06:44:07 Check angles 06:44:07 SkyScan query 06:44:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:44:08 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:44:08 Message to Master queued w/err=0: serial=108096 error=0 06:44:13 Received message from Master: op=Filter serial=108097 06:44:13 Color wheel filter change from 0 to 0 06:44:13 FLIGetFilterPos err=0 currentPosition=0 06:44:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:13 Filter is already there-color wheel unchanged 06:44:13 Received message from Master: op=Shutter serial=108098 06:44:13 Shutter LASER open 06:44:13 Received message from Camera: op=State serial=108100 06:44:13 GetSingleValue result=40 Value=cccccccc 06:44:13 SkyScan query 06:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:44:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:14 Parameters OK 06:44:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:14 Set A/D data flow result=40 06:44:14 Set A/D channel type result=40 06:44:14 Set A/D encoding result=40 06:44:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:14 Set channel filter=0.000000e+000 result=40 06:44:14 Config A/D Result=40 06:44:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:14 Get A/D filter: -9.255963e+061 result=40 06:44:14 Get A/D value=-858993460 result=40 06:44:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:14 Parameters OK 06:44:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:14 Set A/D data flow result=40 06:44:14 Set A/D channel type result=40 06:44:14 Set A/D encoding result=40 06:44:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:14 Set channel filter=0.000000e+000 result=40 06:44:14 Config A/D Result=40 06:44:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:14 Get A/D filter: -9.255963e+061 result=40 06:44:14 Get A/D value=-858993460 result=40 06:44:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:14 Aux= 06:44:14 Message to Camera, serial 108100 queued 06:44:22 Received message from Master: op=Shutter serial=108110 06:44:22 Shutter LASER close 06:44:23 Received message from Master: op=PointingHead serial=108114 06:44:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:44:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:44:23 Point started: ret=0 06:44:23 point_skyscan result=0 06:44:24 Check angles 06:44:24 SkyScan query 06:44:25 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.52<-21568 Statuses=0009 0009 06:44:25 Msec=0 True Az=135.72 Ze=-143.52 Az status=0009 Ze status=0009 06:44:25 Check angles 06:44:25 SkyScan query 06:44:25 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.58<-20172 Statuses=0009 0009 06:44:25 Msec=750 True Az=153.18 Ze=-122.58 Az status=0009 Ze status=0009 06:44:26 Check angles 06:44:26 SkyScan query 06:44:26 SkyScan query done: ret=0 az=170.625<-11375 ze=-101.655<-18777 Statuses=0009 0009 06:44:26 Msec=1500 True Az=170.625 Ze=-101.655 Az status=0009 Ze status=0009 06:44:26 Check angles 06:44:26 SkyScan query 06:44:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.625<-17375 Statuses=0008 0009 06:44:27 Msec=2250 True Az=176.01 Ze=-80.625 Az status=0008 Ze status=0009 06:44:27 Check angles 06:44:27 SkyScan query 06:44:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.715<-15981 Statuses=0008 0009 06:44:28 Msec=3000 True Az=176.01 Ze=-59.715 Az status=0008 Ze status=0009 06:44:28 Check angles 06:44:28 SkyScan query 06:44:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:44:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:44:28 Message to Master queued w/err=0: serial=108114 error=0 06:44:33 Received message from Master: op=Filter serial=108115 06:44:33 Color wheel filter change from 0 to 0 06:44:33 FLIGetFilterPos err=0 currentPosition=0 06:44:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:33 Filter is already there-color wheel unchanged 06:44:34 Received message from Master: op=Shutter serial=108116 06:44:34 Shutter LASER close 06:44:34 Received message from Camera: op=State serial=108118 06:44:34 GetSingleValue result=40 Value=cccccccc 06:44:34 SkyScan query 06:44:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:44:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:34 Parameters OK 06:44:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:34 Set A/D data flow result=40 06:44:34 Set A/D channel type result=40 06:44:34 Set A/D encoding result=40 06:44:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:34 Set channel filter=0.000000e+000 result=40 06:44:34 Config A/D Result=40 06:44:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:34 Get A/D filter: -9.255963e+061 result=40 06:44:34 Get A/D value=-858993460 result=40 06:44:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:34 Parameters OK 06:44:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:34 Set A/D data flow result=40 06:44:34 Set A/D channel type result=40 06:44:34 Set A/D encoding result=40 06:44:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:34 Set channel filter=0.000000e+000 result=40 06:44:34 Config A/D Result=40 06:44:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:34 Get A/D filter: -9.255963e+061 result=40 06:44:34 Get A/D value=-858993460 result=40 06:44:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:34 Aux= 06:44:34 Message to Camera, serial 108118 queued 06:45:11 Received message from Master: op=PointingHead serial=108131 06:45:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:45:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:45:11 Point started: ret=0 06:45:11 point_skyscan result=0 06:45:12 Check angles 06:45:12 SkyScan query 06:45:13 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.78<-13452 Statuses=0009 0009 06:45:13 Msec=0 True Az=152.94 Ze=-21.78 Az status=0009 Ze status=0009 06:45:13 Check angles 06:45:13 SkyScan query 06:45:14 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.36<-12024 Statuses=0009 0009 06:45:14 Msec=750 True Az=135.045 Ze=-0.36 Az status=0009 Ze status=0009 06:45:14 Check angles 06:45:14 SkyScan query 06:45:14 SkyScan query done: ret=0 az=117.555<-7837 ze=20.565<-10629 Statuses=0009 0009 06:45:14 Msec=1500 True Az=117.555 Ze=20.565 Az status=0009 Ze status=0009 06:45:14 Check angles 06:45:14 SkyScan query 06:45:15 SkyScan query done: ret=0 az=100.17<-6678 ze=41.55<-9230 Statuses=0009 0009 06:45:15 Msec=2250 True Az=100.17 Ze=41.55 Az status=0009 Ze status=0009 06:45:15 Check angles 06:45:15 SkyScan query 06:45:16 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 06:45:16 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 06:45:16 Check angles 06:45:16 SkyScan query 06:45:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:45:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:45:17 Message to Master queued w/err=0: serial=108131 error=0 06:45:22 Received message from Master: op=Filter serial=108132 06:45:22 Color wheel filter change from 0 to 0 06:45:22 FLIGetFilterPos err=0 currentPosition=0 06:45:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:22 Filter is already there-color wheel unchanged 06:45:22 Received message from Master: op=Shutter serial=108133 06:45:22 Shutter LASER close 06:45:22 Received message from Camera: op=State serial=108135 06:45:22 GetSingleValue result=40 Value=cccccccc 06:45:22 SkyScan query 06:45:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:45:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:22 Parameters OK 06:45:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:22 Set A/D data flow result=40 06:45:22 Set A/D channel type result=40 06:45:22 Set A/D encoding result=40 06:45:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:22 Set channel filter=0.000000e+000 result=40 06:45:22 Config A/D Result=40 06:45:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:22 Get A/D filter: -9.255963e+061 result=40 06:45:22 Get A/D value=-858993460 result=40 06:45:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:22 Parameters OK 06:45:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:22 Set A/D data flow result=40 06:45:22 Set A/D channel type result=40 06:45:22 Set A/D encoding result=40 06:45:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:22 Set channel filter=0.000000e+000 result=40 06:45:22 Config A/D Result=40 06:45:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:22 Get A/D filter: -9.255963e+061 result=40 06:45:22 Get A/D value=-858993460 result=40 06:45:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:22 Aux= 06:45:22 Message to Camera, serial 108135 queued 06:45:27 Received message from Master: op=Identify serial=108136 06:45:59 Received message from Master: op=PointingHead serial=108151 06:45:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:45:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:46:00 Point started: ret=0 06:46:00 point_skyscan result=0 06:46:00 Check angles 06:46:00 SkyScan query 06:46:01 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 06:46:01 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 06:46:01 Check angles 06:46:01 SkyScan query 06:46:02 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 06:46:02 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 06:46:02 Check angles 06:46:02 SkyScan query 06:46:02 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 06:46:02 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 06:46:03 Check angles [UTC 2018-12-13 06:46:03] 06:46:03 SkyScan query 06:46:03 SkyScan query done: ret=0 az=163.2<-10880 ze=38.505<-9433 Statuses=0009 0008 06:46:03 Msec=2250 True Az=163.2 Ze=38.505 Az status=0009 Ze status=0008 06:46:03 Check angles 06:46:03 SkyScan query 06:46:04 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:46:04 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:46:04 Check angles 06:46:04 SkyScan query 06:46:05 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:46:05 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:46:05 Message to Master queued w/err=0: serial=108151 error=0 06:46:10 Received message from Master: op=Filter serial=108152 06:46:10 Color wheel filter change from 0 to 0 06:46:10 FLIGetFilterPos err=0 currentPosition=0 06:46:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:10 Filter is already there-color wheel unchanged 06:46:10 Received message from Master: op=Shutter serial=108153 06:46:10 Shutter LASER close 06:46:10 Received message from Camera: op=State serial=108155 06:46:10 GetSingleValue result=40 Value=cccccccc 06:46:10 SkyScan query 06:46:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:46:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:10 Parameters OK 06:46:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:10 Set A/D data flow result=40 06:46:10 Set A/D channel type result=40 06:46:10 Set A/D encoding result=40 06:46:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:10 Set channel filter=0.000000e+000 result=40 06:46:10 Config A/D Result=40 06:46:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:10 Get A/D filter: -9.255963e+061 result=40 06:46:10 Get A/D value=-858993460 result=40 06:46:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:10 Parameters OK 06:46:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:10 Set A/D data flow result=40 06:46:10 Set A/D channel type result=40 06:46:10 Set A/D encoding result=40 06:46:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:10 Set channel filter=0.000000e+000 result=40 06:46:10 Config A/D Result=40 06:46:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:10 Get A/D filter: -9.255963e+061 result=40 06:46:10 Get A/D value=-858993460 result=40 06:46:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:10 Aux= 06:46:10 Message to Camera, serial 108155 queued 06:46:47 Received message from Master: op=PointingHead serial=108168 06:46:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:46:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:46:48 Point started: ret=0 06:46:48 point_skyscan result=0 06:46:48 Check angles 06:46:48 SkyScan query 06:46:49 SkyScan query done: ret=0 az=152.445<-10163 ze=8.19<-11454 Statuses=0009 0009 06:46:49 Msec=0 True Az=152.445 Ze=8.19 Az status=0009 Ze status=0009 06:46:49 Check angles 06:46:49 SkyScan query 06:46:50 SkyScan query done: ret=0 az=134.94<-8996 ze=-12.75<-12850 Statuses=0009 0009 06:46:50 Msec=750 True Az=134.94 Ze=-12.75 Az status=0009 Ze status=0009 06:46:50 Check angles 06:46:50 SkyScan query 06:46:50 SkyScan query done: ret=0 az=117.12<-7808 ze=-34.2<-14280 Statuses=0009 0009 06:46:50 Msec=1500 True Az=117.12 Ze=-34.2 Az status=0009 Ze status=0009 06:46:51 Check angles 06:46:51 SkyScan query 06:46:51 SkyScan query done: ret=0 az=99.345<-6623 ze=-51.555<-15437 Statuses=0009 0009 06:46:51 Msec=2250 True Az=99.345 Ze=-51.555 Az status=0009 Ze status=0009 06:46:51 Check angles 06:46:51 SkyScan query 06:46:52 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 06:46:52 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 06:46:52 Check angles 06:46:52 SkyScan query 06:46:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 06:46:53 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 06:46:53 Message to Master queued w/err=0: serial=108168 error=0 06:46:58 Received message from Master: op=Filter serial=108169 06:46:58 Color wheel filter change from 0 to 0 06:46:58 FLIGetFilterPos err=0 currentPosition=0 06:46:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:58 Filter is already there-color wheel unchanged 06:46:58 Received message from Master: op=Shutter serial=108170 06:46:58 Shutter LASER close 06:46:58 Received message from Camera: op=State serial=108172 06:46:58 GetSingleValue result=40 Value=cccccccc 06:46:58 SkyScan query 06:46:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:46:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:59 Parameters OK 06:46:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:59 Set A/D data flow result=40 06:46:59 Set A/D channel type result=40 06:46:59 Set A/D encoding result=40 06:46:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:59 Set channel filter=0.000000e+000 result=40 06:46:59 Config A/D Result=40 06:46:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:59 Get A/D filter: -9.255963e+061 result=40 06:46:59 Get A/D value=-858993460 result=40 06:46:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:59 Parameters OK 06:46:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:59 Set A/D data flow result=40 06:46:59 Set A/D channel type result=40 06:46:59 Set A/D encoding result=40 06:46:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:59 Set channel filter=0.000000e+000 result=40 06:46:59 Config A/D Result=40 06:46:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:59 Get A/D filter: -9.255963e+061 result=40 06:46:59 Get A/D value=-858993460 result=40 06:46:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:59 Aux= 06:46:59 Message to Camera, serial 108172 queued 06:47:35 Received message from Master: op=PointingHead serial=108185 06:47:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:47:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:47:36 Point started: ret=0 06:47:36 point_skyscan result=0 06:47:36 Check angles 06:47:36 SkyScan query 06:47:37 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.135<-17409 Statuses=0009 0009 06:47:37 Msec=0 True Az=108.9 Ze=-81.135 Az status=0009 Ze status=0009 06:47:37 Check angles 06:47:37 SkyScan query 06:47:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 06:47:38 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 06:47:38 Check angles 06:47:38 SkyScan query 06:47:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 06:47:39 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 06:47:39 Check angles 06:47:39 SkyScan query 06:47:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.015<-21601 Statuses=0008 0009 06:47:39 Msec=2250 True Az=112.995 Ze=-144.015 Az status=0008 Ze status=0009 06:47:39 Check angles 06:47:39 SkyScan query 06:47:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.955<-22997 Statuses=0008 0009 06:47:40 Msec=3000 True Az=112.995 Ze=-164.955 Az status=0008 Ze status=0009 06:47:40 Check angles 06:47:40 SkyScan query 06:47:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:47:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:47:41 Message to Master queued w/err=0: serial=108185 error=0 06:47:46 Received message from Master: op=Filter serial=108186 06:47:46 Color wheel filter change from 0 to 0 06:47:46 FLIGetFilterPos err=0 currentPosition=0 06:47:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:46 Filter is already there-color wheel unchanged 06:47:46 Received message from Master: op=Shutter serial=108187 06:47:46 Shutter LASER open 06:47:46 Received message from Camera: op=State serial=108189 06:47:46 GetSingleValue result=40 Value=cccccccc 06:47:46 SkyScan query 06:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:47:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:47 Parameters OK 06:47:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:47 Set A/D data flow result=40 06:47:47 Set A/D channel type result=40 06:47:47 Set A/D encoding result=40 06:47:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:47 Set channel filter=0.000000e+000 result=40 06:47:47 Config A/D Result=40 06:47:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:47 Get A/D filter: -9.255963e+061 result=40 06:47:47 Get A/D value=-858993460 result=40 06:47:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:47 Parameters OK 06:47:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:47 Set A/D data flow result=40 06:47:47 Set A/D channel type result=40 06:47:47 Set A/D encoding result=40 06:47:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:47 Set channel filter=0.000000e+000 result=40 06:47:47 Config A/D Result=40 06:47:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:47 Get A/D filter: -9.255963e+061 result=40 06:47:47 Get A/D value=-858993460 result=40 06:47:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:47 Aux= 06:47:47 Message to Camera, serial 108189 queued 06:47:55 Received message from Master: op=Shutter serial=108199 06:47:55 Shutter LASER close 06:47:56 Received message from Master: op=PointingHead serial=108203 06:47:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:47:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:47:56 Point started: ret=0 06:47:56 point_skyscan result=0 06:47:57 Check angles 06:47:57 SkyScan query 06:47:57 SkyScan query done: ret=0 az=89.88<-5992 ze=157.215<-1519 Statuses=0009 0009 06:47:57 Msec=0 True Az=89.88 Ze=157.215 Az status=0009 Ze status=0009 06:47:57 Check angles 06:47:57 SkyScan query 06:47:58 SkyScan query done: ret=0 az=72<-4800 ze=135.81<-2946 Statuses=0009 0009 06:47:58 Msec=750 True Az=72 Ze=135.81 Az status=0009 Ze status=0009 06:47:58 Check angles 06:47:58 SkyScan query 06:47:59 SkyScan query done: ret=0 az=54.78<-3652 ze=114.855<-4343 Statuses=0009 0009 06:47:59 Msec=1500 True Az=54.78 Ze=114.855 Az status=0009 Ze status=0009 06:47:59 Check angles 06:47:59 SkyScan query 06:48:00 SkyScan query done: ret=0 az=40.89<-2726 ze=93.885<-5741 Statuses=0009 0009 06:48:00 Msec=2250 True Az=40.89 Ze=93.885 Az status=0009 Ze status=0009 06:48:00 Check angles 06:48:00 SkyScan query 06:48:00 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 06:48:00 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 06:48:00 Check angles 06:48:00 SkyScan query 06:48:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 06:48:01 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 06:48:01 Check angles 06:48:01 SkyScan query 06:48:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:48:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:48:02 Message to Master queued w/err=0: serial=108203 error=0 06:48:07 Received message from Master: op=Filter serial=108204 06:48:07 Color wheel filter change from 0 to 0 06:48:07 FLIGetFilterPos err=0 currentPosition=0 06:48:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:07 Filter is already there-color wheel unchanged 06:48:07 Received message from Master: op=Shutter serial=108205 06:48:07 Shutter LASER close 06:48:07 Received message from Camera: op=State serial=108207 06:48:07 GetSingleValue result=40 Value=cccccccc 06:48:07 SkyScan query 06:48:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:48:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:08 Parameters OK 06:48:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:08 Set A/D data flow result=40 06:48:08 Set A/D channel type result=40 06:48:08 Set A/D encoding result=40 06:48:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:08 Set channel filter=0.000000e+000 result=40 06:48:08 Config A/D Result=40 06:48:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:08 Get A/D filter: -9.255963e+061 result=40 06:48:08 Get A/D value=-858993460 result=40 06:48:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:08 Parameters OK 06:48:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:08 Set A/D data flow result=40 06:48:08 Set A/D channel type result=40 06:48:08 Set A/D encoding result=40 06:48:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:08 Set channel filter=0.000000e+000 result=40 06:48:08 Config A/D Result=40 06:48:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:08 Get A/D filter: -9.255963e+061 result=40 06:48:08 Get A/D value=-858993460 result=40 06:48:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:08 Aux= 06:48:08 Message to Camera, serial 108207 queued 06:48:45 Received message from Master: op=PointingHead serial=108220 06:48:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:48:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:48:45 Point started: ret=0 06:48:45 point_skyscan result=0 06:48:46 Check angles 06:48:46 SkyScan query 06:48:46 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 06:48:46 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 06:48:46 Check angles 06:48:46 SkyScan query 06:48:47 SkyScan query done: ret=0 az=81.39<-5426 ze=66.495<-7567 Statuses=0009 0008 06:48:47 Msec=750 True Az=81.39 Ze=66.495 Az status=0009 Ze status=0008 06:48:47 Check angles 06:48:47 SkyScan query 06:48:48 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 06:48:48 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 06:48:48 Check angles 06:48:48 SkyScan query 06:48:48 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 06:48:48 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 06:48:49 Check angles 06:48:49 SkyScan query 06:48:49 SkyScan query done: ret=0 az=134.37<-8958 ze=66.495<-7567 Statuses=0009 0008 06:48:49 Msec=3000 True Az=134.37 Ze=66.495 Az status=0009 Ze status=0008 06:48:49 Check angles 06:48:49 SkyScan query 06:48:50 SkyScan query done: ret=0 az=152.265<-10151 ze=66.495<-7567 Statuses=0009 0008 06:48:50 Msec=3750 True Az=152.265 Ze=66.495 Az status=0009 Ze status=0008 06:48:50 Check angles 06:48:50 SkyScan query 06:48:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:48:51 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:48:51 Message to Master queued w/err=0: serial=108220 error=0 06:48:56 Received message from Master: op=Filter serial=108221 06:48:56 Color wheel filter change from 0 to 0 06:48:56 FLIGetFilterPos err=0 currentPosition=0 06:48:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:56 Filter is already there-color wheel unchanged 06:48:56 Received message from Master: op=Shutter serial=108222 06:48:56 Shutter LASER close 06:48:56 Received message from Camera: op=State serial=108224 06:48:56 GetSingleValue result=40 Value=cccccccc 06:48:56 SkyScan query 06:48:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:48:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:57 Parameters OK 06:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:57 Set A/D data flow result=40 06:48:57 Set A/D channel type result=40 06:48:57 Set A/D encoding result=40 06:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:57 Set channel filter=0.000000e+000 result=40 06:48:57 Config A/D Result=40 06:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:57 Get A/D filter: -9.255963e+061 result=40 06:48:57 Get A/D value=-858993460 result=40 06:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:57 Parameters OK 06:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:57 Set A/D data flow result=40 06:48:57 Set A/D channel type result=40 06:48:57 Set A/D encoding result=40 06:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:57 Set channel filter=0.000000e+000 result=40 06:48:57 Config A/D Result=40 06:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:57 Get A/D filter: -9.255963e+061 result=40 06:48:57 Get A/D value=-858993460 result=40 06:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:57 Aux= 06:48:57 Message to Camera, serial 108224 queued 06:49:34 Received message from Master: op=PointingHead serial=108237 06:49:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:49:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:49:34 Point started: ret=0 06:49:34 point_skyscan result=0 06:49:35 Check angles 06:49:35 SkyScan query 06:49:35 SkyScan query done: ret=0 az=134.595<-8973 ze=36.27<-9582 Statuses=0009 0009 06:49:35 Msec=0 True Az=134.595 Ze=36.27 Az status=0009 Ze status=0009 06:49:35 Check angles 06:49:35 SkyScan query 06:49:36 SkyScan query done: ret=0 az=117.165<-7811 ze=15.345<-10977 Statuses=0009 0009 06:49:36 Msec=750 True Az=117.165 Ze=15.345 Az status=0009 Ze status=0009 06:49:36 Check angles 06:49:36 SkyScan query 06:49:37 SkyScan query done: ret=0 az=99.735<-6649 ze=-5.625<-12375 Statuses=0009 0009 06:49:37 Msec=1500 True Az=99.735 Ze=-5.625 Az status=0009 Ze status=0009 06:49:37 Check angles 06:49:37 SkyScan query 06:49:37 SkyScan query done: ret=0 az=81.9<-5460 ze=-27.075<-13805 Statuses=0009 0009 06:49:37 Msec=2250 True Az=81.9 Ze=-27.075 Az status=0009 Ze status=0009 06:49:38 Check angles 06:49:38 SkyScan query 06:49:38 SkyScan query done: ret=0 az=64.065<-4271 ze=-38.565<-14571 Statuses=0009 0008 06:49:38 Msec=3000 True Az=64.065 Ze=-38.565 Az status=0009 Ze status=0008 06:49:38 Check angles 06:49:38 SkyScan query 06:49:39 SkyScan query done: ret=0 az=46.635<-3109 ze=-38.52<-14568 Statuses=0009 0008 06:49:39 Msec=3750 True Az=46.635 Ze=-38.52 Az status=0009 Ze status=0008 06:49:39 Check angles 06:49:39 SkyScan query 06:49:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:49:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:49:40 Message to Master queued w/err=0: serial=108237 error=0 06:49:45 Received message from Master: op=Filter serial=108238 06:49:45 Color wheel filter change from 0 to 0 06:49:45 FLIGetFilterPos err=0 currentPosition=0 06:49:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:45 Filter is already there-color wheel unchanged 06:49:45 Received message from Master: op=Shutter serial=108239 06:49:45 Shutter LASER close 06:49:45 Received message from Camera: op=State serial=108241 06:49:45 GetSingleValue result=40 Value=cccccccc 06:49:45 SkyScan query 06:49:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:49:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:46 Parameters OK 06:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:46 Set A/D data flow result=40 06:49:46 Set A/D channel type result=40 06:49:46 Set A/D encoding result=40 06:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:46 Set channel filter=0.000000e+000 result=40 06:49:46 Config A/D Result=40 06:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:46 Get A/D filter: -9.255963e+061 result=40 06:49:46 Get A/D value=-858993460 result=40 06:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:46 Parameters OK 06:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:46 Set A/D data flow result=40 06:49:46 Set A/D channel type result=40 06:49:46 Set A/D encoding result=40 06:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:46 Set channel filter=0.000000e+000 result=40 06:49:46 Config A/D Result=40 06:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:46 Get A/D filter: -9.255963e+061 result=40 06:49:46 Get A/D value=-858993460 result=40 06:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:46 Aux= 06:49:46 Message to Camera, serial 108241 queued 06:50:22 Received message from Master: op=PointingHead serial=108254 06:50:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:50:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:50:23 Point started: ret=0 06:50:23 point_skyscan result=0 06:50:23 Check angles 06:50:23 SkyScan query 06:50:24 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.4<-16560 Statuses=0009 0009 06:50:24 Msec=0 True Az=64.08 Ze=-68.4 Az status=0009 Ze status=0009 06:50:24 Check angles 06:50:24 SkyScan query 06:50:25 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.82<-17988 Statuses=0009 0009 06:50:25 Msec=750 True Az=81.885 Ze=-89.82 Az status=0009 Ze status=0009 06:50:25 Check angles 06:50:25 SkyScan query 06:50:26 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.76<-19384 Statuses=0009 0009 06:50:26 Msec=1500 True Az=99.435 Ze=-110.76 Az status=0009 Ze status=0009 06:50:26 Check angles 06:50:26 SkyScan query 06:50:26 SkyScan query done: ret=0 az=116.94<-7796 ze=-131.7<-20780 Statuses=0009 0009 06:50:26 Msec=2250 True Az=116.94 Ze=-131.7 Az status=0009 Ze status=0009 06:50:26 Check angles 06:50:26 SkyScan query 06:50:27 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 06:50:27 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 06:50:27 Check angles 06:50:27 SkyScan query 06:50:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:50:28 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:50:28 Message to Master queued w/err=0: serial=108254 error=0 06:50:33 Received message from Master: op=Filter serial=108255 06:50:33 Color wheel filter change from 0 to 0 06:50:33 FLIGetFilterPos err=0 currentPosition=0 06:50:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:33 Filter is already there-color wheel unchanged 06:50:33 Received message from Master: op=Shutter serial=108256 06:50:33 Shutter LASER close 06:50:33 Received message from Camera: op=State serial=108258 06:50:33 GetSingleValue result=40 Value=cccccccc 06:50:33 SkyScan query 06:50:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:50:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:34 Parameters OK 06:50:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:34 Set A/D data flow result=40 06:50:34 Set A/D channel type result=40 06:50:34 Set A/D encoding result=40 06:50:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:34 Set channel filter=0.000000e+000 result=40 06:50:34 Config A/D Result=40 06:50:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:34 Get A/D filter: -9.255963e+061 result=40 06:50:34 Get A/D value=-858993460 result=40 06:50:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:34 Parameters OK 06:50:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:34 Set A/D data flow result=40 06:50:34 Set A/D channel type result=40 06:50:34 Set A/D encoding result=40 06:50:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:34 Set channel filter=0.000000e+000 result=40 06:50:34 Config A/D Result=40 06:50:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:34 Get A/D filter: -9.255963e+061 result=40 06:50:34 Get A/D value=-858993460 result=40 06:50:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:34 Aux= 06:50:34 Message to Camera, serial 108258 queued 06:51:10 Received message from Master: op=PointingHead serial=108271 06:51:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:51:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:51:11 Point started: ret=0 06:51:11 point_skyscan result=0 06:51:12 Check angles 06:51:12 SkyScan query 06:51:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 06:51:12 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 06:51:12 Check angles 06:51:12 SkyScan query 06:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:51:13 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:51:13 Message to Master queued w/err=0: serial=108271 error=0 06:51:18 Received message from Master: op=Filter serial=108272 06:51:18 Color wheel filter change from 0 to 0 06:51:18 FLIGetFilterPos err=0 currentPosition=0 06:51:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:18 Filter is already there-color wheel unchanged 06:51:18 Received message from Master: op=Shutter serial=108273 06:51:18 Shutter LASER open 06:51:18 Received message from Camera: op=State serial=108275 06:51:18 GetSingleValue result=40 Value=cccccccc 06:51:18 SkyScan query 06:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:51:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:19 Parameters OK 06:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:19 Set A/D data flow result=40 06:51:19 Set A/D channel type result=40 06:51:19 Set A/D encoding result=40 06:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:19 Set channel filter=0.000000e+000 result=40 06:51:19 Config A/D Result=40 06:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:19 Get A/D filter: -9.255963e+061 result=40 06:51:19 Get A/D value=-858993460 result=40 06:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:19 Parameters OK 06:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:19 Set A/D data flow result=40 06:51:19 Set A/D channel type result=40 06:51:19 Set A/D encoding result=40 06:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:19 Set channel filter=0.000000e+000 result=40 06:51:19 Config A/D Result=40 06:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:19 Get A/D filter: -9.255963e+061 result=40 06:51:19 Get A/D value=-858993460 result=40 06:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:19 Aux= 06:51:19 Message to Camera, serial 108275 queued 06:51:27 Received message from Master: op=Shutter serial=108285 06:51:27 Shutter LASER close 06:51:28 Received message from Master: op=PointingHead serial=108289 06:51:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:51:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:51:28 Point started: ret=0 06:51:28 point_skyscan result=0 06:51:29 Check angles 06:51:29 SkyScan query 06:51:30 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.115<-21541 Statuses=0009 0009 06:51:30 Msec=0 True Az=136.185 Ze=-143.115 Az status=0009 Ze status=0009 06:51:30 Check angles 06:51:30 SkyScan query 06:51:30 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.13<-20142 Statuses=0009 0009 06:51:30 Msec=750 True Az=153.615 Ze=-122.13 Az status=0009 Ze status=0009 06:51:30 Check angles 06:51:30 SkyScan query 06:51:31 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.22<-18748 Statuses=0009 0009 06:51:31 Msec=1500 True Az=171.09 Ze=-101.22 Az status=0009 Ze status=0009 06:51:31 Check angles 06:51:31 SkyScan query 06:51:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 06:51:32 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 06:51:32 Check angles 06:51:32 SkyScan query 06:51:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.83<-15922 Statuses=0008 0009 06:51:33 Msec=3000 True Az=176.01 Ze=-58.83 Az status=0008 Ze status=0009 06:51:33 Check angles 06:51:33 SkyScan query 06:51:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:51:33 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:51:33 Message to Master queued w/err=0: serial=108289 error=0 06:51:38 Received message from Master: op=Filter serial=108290 06:51:38 Color wheel filter change from 0 to 0 06:51:38 FLIGetFilterPos err=0 currentPosition=0 06:51:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:38 Filter is already there-color wheel unchanged 06:51:38 Received message from Master: op=Shutter serial=108291 06:51:38 Shutter LASER close 06:51:39 Received message from Camera: op=State serial=108293 06:51:39 GetSingleValue result=40 Value=cccccccc 06:51:39 SkyScan query 06:51:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:51:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:39 Parameters OK 06:51:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:39 Set A/D data flow result=40 06:51:39 Set A/D channel type result=40 06:51:39 Set A/D encoding result=40 06:51:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:39 Set channel filter=0.000000e+000 result=40 06:51:39 Config A/D Result=40 06:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:39 Get A/D filter: -9.255963e+061 result=40 06:51:39 Get A/D value=-858993460 result=40 06:51:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:39 Parameters OK 06:51:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:39 Set A/D data flow result=40 06:51:39 Set A/D channel type result=40 06:51:39 Set A/D encoding result=40 06:51:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:39 Set channel filter=0.000000e+000 result=40 06:51:39 Config A/D Result=40 06:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:39 Get A/D filter: -9.255963e+061 result=40 06:51:39 Get A/D value=-858993460 result=40 06:51:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:39 Aux= 06:51:39 Message to Camera, serial 108293 queued 06:52:16 Received message from Master: op=PointingHead serial=108306 06:52:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:52:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:52:16 Point started: ret=0 06:52:16 point_skyscan result=0 06:52:17 Check angles 06:52:17 SkyScan query 06:52:18 SkyScan query done: ret=0 az=152.895<-10193 ze=-21.615<-13441 Statuses=0009 0009 06:52:18 Msec=0 True Az=152.895 Ze=-21.615 Az status=0009 Ze status=0009 06:52:18 Check angles 06:52:18 SkyScan query 06:52:18 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.615<-12041 Statuses=0009 0009 06:52:18 Msec=750 True Az=135.39 Ze=-0.615 Az status=0009 Ze status=0009 06:52:19 Check angles 06:52:19 SkyScan query 06:52:19 SkyScan query done: ret=0 az=117.9<-7860 ze=20.31<-10646 Statuses=0009 0009 06:52:19 Msec=1500 True Az=117.9 Ze=20.31 Az status=0009 Ze status=0009 06:52:19 Check angles 06:52:19 SkyScan query 06:52:20 SkyScan query done: ret=0 az=100.125<-6675 ze=41.715<-9219 Statuses=0009 0009 06:52:20 Msec=2250 True Az=100.125 Ze=41.715 Az status=0009 Ze status=0009 06:52:20 Check angles 06:52:20 SkyScan query 06:52:21 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 06:52:21 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 06:52:21 Check angles 06:52:21 SkyScan query 06:52:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:52:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:52:21 Message to Master queued w/err=0: serial=108306 error=0 06:52:26 Received message from Master: op=Filter serial=108307 06:52:26 Color wheel filter change from 0 to 0 06:52:26 FLIGetFilterPos err=0 currentPosition=0 06:52:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:26 Filter is already there-color wheel unchanged 06:52:27 Received message from Master: op=Shutter serial=108308 06:52:27 Shutter LASER close 06:52:27 Received message from Camera: op=State serial=108310 06:52:27 GetSingleValue result=40 Value=cccccccc 06:52:27 SkyScan query 06:52:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:52:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:27 Parameters OK 06:52:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:27 Set A/D data flow result=40 06:52:27 Set A/D channel type result=40 06:52:27 Set A/D encoding result=40 06:52:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:27 Set channel filter=0.000000e+000 result=40 06:52:27 Config A/D Result=40 06:52:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:27 Get A/D filter: -9.255963e+061 result=40 06:52:27 Get A/D value=-858993460 result=40 06:52:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:27 Parameters OK 06:52:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:27 Set A/D data flow result=40 06:52:27 Set A/D channel type result=40 06:52:27 Set A/D encoding result=40 06:52:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:27 Set channel filter=0.000000e+000 result=40 06:52:27 Config A/D Result=40 06:52:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:27 Get A/D filter: -9.255963e+061 result=40 06:52:27 Get A/D value=-858993460 result=40 06:52:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:27 Aux= 06:52:27 Message to Camera, serial 108310 queued 06:53:04 Received message from Master: op=PointingHead serial=108323 06:53:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:53:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:53:04 Point started: ret=0 06:53:04 point_skyscan result=0 06:53:05 Check angles 06:53:05 SkyScan query 06:53:06 SkyScan query done: ret=0 az=109.32<-7288 ze=38.49<-9434 Statuses=0009 0008 06:53:06 Msec=0 True Az=109.32 Ze=38.49 Az status=0009 Ze status=0008 06:53:06 Check angles 06:53:06 SkyScan query 06:53:07 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 06:53:07 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 06:53:07 Check angles 06:53:07 SkyScan query 06:53:07 SkyScan query done: ret=0 az=144.315<-9621 ze=38.505<-9433 Statuses=0009 0008 06:53:07 Msec=1500 True Az=144.315 Ze=38.505 Az status=0009 Ze status=0008 06:53:07 Check angles 06:53:07 SkyScan query 06:53:08 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 06:53:08 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 06:53:08 Check angles 06:53:08 SkyScan query 06:53:09 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:53:09 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:53:09 Check angles 06:53:09 SkyScan query 06:53:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:53:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:53:10 Message to Master queued w/err=0: serial=108323 error=0 06:53:15 Received message from Master: op=Filter serial=108324 06:53:15 Color wheel filter change from 0 to 0 06:53:15 FLIGetFilterPos err=0 currentPosition=0 06:53:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:15 Filter is already there-color wheel unchanged 06:53:15 Received message from Master: op=Shutter serial=108325 06:53:15 Shutter LASER close 06:53:15 Received message from Camera: op=State serial=108327 06:53:15 GetSingleValue result=40 Value=cccccccc 06:53:15 SkyScan query 06:53:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:53:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:15 Parameters OK 06:53:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:15 Set A/D data flow result=40 06:53:15 Set A/D channel type result=40 06:53:15 Set A/D encoding result=40 06:53:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:15 Set channel filter=0.000000e+000 result=40 06:53:15 Config A/D Result=40 06:53:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:15 Get A/D filter: -9.255963e+061 result=40 06:53:15 Get A/D value=-858993460 result=40 06:53:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:15 Parameters OK 06:53:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:15 Set A/D data flow result=40 06:53:15 Set A/D channel type result=40 06:53:15 Set A/D encoding result=40 06:53:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:15 Set channel filter=0.000000e+000 result=40 06:53:15 Config A/D Result=40 06:53:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:15 Get A/D filter: -9.255963e+061 result=40 06:53:15 Get A/D value=-858993460 result=40 06:53:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:15 Aux= 06:53:15 Message to Camera, serial 108327 queued 06:53:52 Received message from Master: op=PointingHead serial=108340 06:53:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:53:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:53:52 Point started: ret=0 06:53:52 point_skyscan result=0 06:53:53 Check angles 06:53:53 SkyScan query 06:53:54 SkyScan query done: ret=0 az=152.745<-10183 ze=8.46<-11436 Statuses=0009 0009 06:53:54 Msec=0 True Az=152.745 Ze=8.46 Az status=0009 Ze status=0009 06:53:54 Check angles 06:53:54 SkyScan query 06:53:55 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.465<-12831 Statuses=0009 0009 06:53:55 Msec=750 True Az=135.315 Ze=-12.465 Az status=0009 Ze status=0009 06:53:55 Check angles 06:53:55 SkyScan query 06:53:55 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.39<-14226 Statuses=0009 0009 06:53:55 Msec=1500 True Az=117.75 Ze=-33.39 Az status=0009 Ze status=0009 06:53:55 Check angles 06:53:55 SkyScan query 06:53:56 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.54<-15436 Statuses=0009 0009 06:53:56 Msec=2250 True Az=100.365 Ze=-51.54 Az status=0009 Ze status=0009 06:53:56 Check angles 06:53:56 SkyScan query 06:53:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 06:53:57 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 06:53:57 Check angles 06:53:57 SkyScan query 06:53:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:53:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:53:58 Message to Master queued w/err=0: serial=108340 error=0 06:54:03 Received message from Master: op=Filter serial=108341 06:54:03 Color wheel filter change from 0 to 0 06:54:03 FLIGetFilterPos err=0 currentPosition=0 06:54:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:03 Filter is already there-color wheel unchanged 06:54:03 Received message from Master: op=Shutter serial=108342 06:54:03 Shutter LASER close 06:54:03 Received message from Camera: op=State serial=108344 06:54:03 GetSingleValue result=40 Value=cccccccc 06:54:03 SkyScan query 06:54:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:54:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:03 Parameters OK 06:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:03 Set A/D data flow result=40 06:54:03 Set A/D channel type result=40 06:54:03 Set A/D encoding result=40 06:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:03 Set channel filter=0.000000e+000 result=40 06:54:03 Config A/D Result=40 06:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:03 Get A/D filter: -9.255963e+061 result=40 06:54:03 Get A/D value=-858993460 result=40 06:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:03 Parameters OK 06:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:03 Set A/D data flow result=40 06:54:03 Set A/D channel type result=40 06:54:03 Set A/D encoding result=40 06:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:03 Set channel filter=0.000000e+000 result=40 06:54:03 Config A/D Result=40 06:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:03 Get A/D filter: -9.255963e+061 result=40 06:54:03 Get A/D value=-858993460 result=40 06:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:03 Aux= 06:54:03 Message to Camera, serial 108344 queued 06:54:39 Received message from Master: op=PointingHead serial=108356 06:54:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:54:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:54:40 Point started: ret=0 06:54:40 point_skyscan result=0 06:54:40 Check angles 06:54:40 SkyScan query 06:54:41 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.09<-17406 Statuses=0009 0009 06:54:41 Msec=0 True Az=108.945 Ze=-81.09 Az status=0009 Ze status=0009 06:54:41 Check angles 06:54:41 SkyScan query 06:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 06:54:42 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 06:54:42 Check angles 06:54:42 SkyScan query 06:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 06:54:42 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 06:54:43 Check angles 06:54:43 SkyScan query 06:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.94<-21596 Statuses=0008 0009 06:54:43 Msec=2250 True Az=112.995 Ze=-143.94 Az status=0008 Ze status=0009 06:54:43 Check angles 06:54:43 SkyScan query 06:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 06:54:44 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 06:54:44 Check angles 06:54:44 SkyScan query 06:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:54:45 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:54:45 Message to Master queued w/err=0: serial=108356 error=0 06:54:50 Received message from Master: op=Filter serial=108357 06:54:50 Color wheel filter change from 0 to 0 06:54:50 FLIGetFilterPos err=0 currentPosition=0 06:54:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:50 Filter is already there-color wheel unchanged 06:54:50 Received message from Master: op=Shutter serial=108358 06:54:50 Shutter LASER open 06:54:50 Received message from Camera: op=State serial=108360 06:54:50 GetSingleValue result=40 Value=cccccccc 06:54:50 SkyScan query 06:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:54:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:51 Parameters OK 06:54:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:51 Set A/D data flow result=40 06:54:51 Set A/D channel type result=40 06:54:51 Set A/D encoding result=40 06:54:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:51 Set channel filter=0.000000e+000 result=40 06:54:51 Config A/D Result=40 06:54:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:51 Get A/D filter: -9.255963e+061 result=40 06:54:51 Get A/D value=-858993460 result=40 06:54:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:51 Parameters OK 06:54:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:51 Set A/D data flow result=40 06:54:51 Set A/D channel type result=40 06:54:51 Set A/D encoding result=40 06:54:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:51 Set channel filter=0.000000e+000 result=40 06:54:51 Config A/D Result=40 06:54:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:51 Get A/D filter: -9.255963e+061 result=40 06:54:51 Get A/D value=-858993460 result=40 06:54:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:51 Aux= 06:54:51 Message to Camera, serial 108360 queued 06:54:59 Received message from Master: op=Shutter serial=108370 06:54:59 Shutter LASER close 06:55:00 Received message from Master: op=PointingHead serial=108374 06:55:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:55:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:55:00 Point started: ret=0 06:55:00 point_skyscan result=0 06:55:01 Check angles 06:55:01 SkyScan query 06:55:01 SkyScan query done: ret=0 az=90.18<-6012 ze=157.47<-1502 Statuses=0009 0009 06:55:01 Msec=0 True Az=90.18 Ze=157.47 Az status=0009 Ze status=0009 06:55:01 Check angles 06:55:01 SkyScan query 06:55:02 SkyScan query done: ret=0 az=72.66<-4844 ze=136.47<-2902 Statuses=0009 0009 06:55:02 Msec=750 True Az=72.66 Ze=136.47 Az status=0009 Ze status=0009 06:55:02 Check angles 06:55:02 SkyScan query 06:55:03 SkyScan query done: ret=0 az=55.17<-3678 ze=115.59<-4294 Statuses=0009 0009 06:55:03 Msec=1500 True Az=55.17 Ze=115.59 Az status=0009 Ze status=0009 06:55:03 Check angles 06:55:03 SkyScan query 06:55:03 SkyScan query done: ret=0 az=40.875<-2725 ze=94.59<-5694 Statuses=0009 0009 06:55:03 Msec=2250 True Az=40.875 Ze=94.59 Az status=0009 Ze status=0009 06:55:04 Check angles 06:55:04 SkyScan query 06:55:04 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 06:55:04 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 06:55:04 Check angles 06:55:04 SkyScan query 06:55:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 06:55:05 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 06:55:05 Check angles 06:55:05 SkyScan query 06:55:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:55:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:55:06 Message to Master queued w/err=0: serial=108374 error=0 06:55:11 Received message from Master: op=Filter serial=108375 06:55:11 Color wheel filter change from 0 to 0 06:55:11 FLIGetFilterPos err=0 currentPosition=0 06:55:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:11 Filter is already there-color wheel unchanged 06:55:11 Received message from Master: op=Shutter serial=108376 06:55:11 Shutter LASER close 06:55:11 Received message from Camera: op=State serial=108378 06:55:11 GetSingleValue result=40 Value=cccccccc 06:55:11 SkyScan query 06:55:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:55:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:12 Parameters OK 06:55:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:12 Set A/D data flow result=40 06:55:12 Set A/D channel type result=40 06:55:12 Set A/D encoding result=40 06:55:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:12 Set channel filter=0.000000e+000 result=40 06:55:12 Config A/D Result=40 06:55:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:12 Get A/D filter: -9.255963e+061 result=40 06:55:12 Get A/D value=-858993460 result=40 06:55:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:12 Parameters OK 06:55:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:12 Set A/D data flow result=40 06:55:12 Set A/D channel type result=40 06:55:12 Set A/D encoding result=40 06:55:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:12 Set channel filter=0.000000e+000 result=40 06:55:12 Config A/D Result=40 06:55:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:12 Get A/D filter: -9.255963e+061 result=40 06:55:12 Get A/D value=-858993460 result=40 06:55:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:12 Aux= 06:55:12 Message to Camera, serial 108378 queued 06:55:48 Received message from Master: op=PointingHead serial=108391 06:55:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:55:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:55:49 Point started: ret=0 06:55:49 point_skyscan result=0 06:55:50 Check angles 06:55:50 SkyScan query 06:55:50 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 06:55:50 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 06:55:50 Check angles 06:55:50 SkyScan query 06:55:51 SkyScan query done: ret=0 az=81.3<-5420 ze=66.51<-7566 Statuses=0009 0008 06:55:51 Msec=750 True Az=81.3 Ze=66.51 Az status=0009 Ze status=0008 06:55:51 Check angles 06:55:51 SkyScan query 06:55:52 SkyScan query done: ret=0 az=99.24<-6616 ze=66.495<-7567 Statuses=0009 0008 06:55:52 Msec=1500 True Az=99.24 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-13 06:55:52] 06:55:52 Check angles 06:55:52 SkyScan query 06:55:53 SkyScan query done: ret=0 az=118.35<-7890 ze=66.495<-7567 Statuses=0009 0008 06:55:53 Msec=2250 True Az=118.35 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-13 06:55:53] 06:55:53 Check angles 06:55:53 SkyScan query 06:55:53 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 06:55:53 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 06:55:53 Check angles 06:55:53 SkyScan query 06:55:54 SkyScan query done: ret=0 az=152.505<-10167 ze=66.495<-7567 Statuses=0009 0008 06:55:54 Msec=3750 True Az=152.505 Ze=66.495 Az status=0009 Ze status=0008 06:55:54 Check angles 06:55:54 SkyScan query 06:55:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:55:55 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 06:55:55 Message to Master queued w/err=0: serial=108391 error=0 06:56:00 Received message from Master: op=Filter serial=108392 06:56:00 Color wheel filter change from 0 to 0 06:56:00 FLIGetFilterPos err=0 currentPosition=0 06:56:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:00 Filter is already there-color wheel unchanged 06:56:00 Received message from Master: op=Shutter serial=108393 06:56:00 Shutter LASER close 06:56:00 Received message from Camera: op=State serial=108395 06:56:00 GetSingleValue result=40 Value=cccccccc 06:56:00 SkyScan query 06:56:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:56:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:01 Parameters OK 06:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:01 Set A/D data flow result=40 06:56:01 Set A/D channel type result=40 06:56:01 Set A/D encoding result=40 06:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:01 Set channel filter=0.000000e+000 result=40 06:56:01 Config A/D Result=40 06:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:01 Get A/D filter: -9.255963e+061 result=40 06:56:01 Get A/D value=-858993460 result=40 06:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:01 Parameters OK 06:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:01 Set A/D data flow result=40 06:56:01 Set A/D channel type result=40 06:56:01 Set A/D encoding result=40 06:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:01 Set channel filter=0.000000e+000 result=40 06:56:01 Config A/D Result=40 06:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:01 Get A/D filter: -9.255963e+061 result=40 06:56:01 Get A/D value=-858993460 result=40 06:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:01 Aux= 06:56:01 Message to Camera, serial 108395 queued 06:56:37 Received message from Master: op=PointingHead serial=108408 06:56:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:56:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:56:38 Point started: ret=0 06:56:38 point_skyscan result=0 06:56:38 Check angles 06:56:38 SkyScan query 06:56:39 SkyScan query done: ret=0 az=135.195<-9013 ze=36.945<-9537 Statuses=0009 0009 06:56:39 Msec=0 True Az=135.195 Ze=36.945 Az status=0009 Ze status=0009 06:56:39 Check angles 06:56:39 SkyScan query 06:56:40 SkyScan query done: ret=0 az=117.705<-7847 ze=15.975<-10935 Statuses=0009 0009 06:56:40 Msec=750 True Az=117.705 Ze=15.975 Az status=0009 Ze status=0009 06:56:40 Check angles 06:56:40 SkyScan query 06:56:40 SkyScan query done: ret=0 az=100.335<-6689 ze=-4.965<-12331 Statuses=0009 0009 06:56:40 Msec=1500 True Az=100.335 Ze=-4.965 Az status=0009 Ze status=0009 06:56:41 Check angles 06:56:41 SkyScan query 06:56:41 SkyScan query done: ret=0 az=82.845<-5523 ze=-25.935<-13729 Statuses=0009 0009 06:56:41 Msec=2250 True Az=82.845 Ze=-25.935 Az status=0009 Ze status=0009 06:56:41 Check angles 06:56:41 SkyScan query 06:56:42 SkyScan query done: ret=0 az=64.965<-4331 ze=-38.565<-14571 Statuses=0009 0008 06:56:42 Msec=3000 True Az=64.965 Ze=-38.565 Az status=0009 Ze status=0008 06:56:42 Check angles 06:56:42 SkyScan query 06:56:43 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.535<-14569 Statuses=0009 0008 06:56:43 Msec=3750 True Az=47.505 Ze=-38.535 Az status=0009 Ze status=0008 06:56:43 Check angles 06:56:43 SkyScan query 06:56:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:56:44 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:56:44 Message to Master queued w/err=0: serial=108408 error=0 06:56:49 Received message from Master: op=Filter serial=108409 06:56:49 Color wheel filter change from 0 to 0 06:56:49 FLIGetFilterPos err=0 currentPosition=0 06:56:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:49 Filter is already there-color wheel unchanged 06:56:49 Received message from Master: op=Shutter serial=108410 06:56:49 Shutter LASER close 06:56:49 Received message from Camera: op=State serial=108412 06:56:49 GetSingleValue result=40 Value=cccccccc 06:56:49 SkyScan query 06:56:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:56:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:49 Parameters OK 06:56:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:49 Set A/D data flow result=40 06:56:49 Set A/D channel type result=40 06:56:49 Set A/D encoding result=40 06:56:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:49 Set channel filter=0.000000e+000 result=40 06:56:49 Config A/D Result=40 06:56:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:49 Get A/D filter: -9.255963e+061 result=40 06:56:49 Get A/D value=-858993460 result=40 06:56:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:49 Parameters OK 06:56:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:49 Set A/D data flow result=40 06:56:49 Set A/D channel type result=40 06:56:49 Set A/D encoding result=40 06:56:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:49 Set channel filter=0.000000e+000 result=40 06:56:49 Config A/D Result=40 06:56:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:49 Get A/D filter: -9.255963e+061 result=40 06:56:49 Get A/D value=-858993460 result=40 06:56:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:49 Aux= 06:56:49 Message to Camera, serial 108412 queued 06:57:26 Received message from Master: op=PointingHead serial=108425 06:57:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:57:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:57:26 Point started: ret=0 06:57:26 point_skyscan result=0 06:57:27 Check angles 06:57:27 SkyScan query 06:57:28 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.49<-16566 Statuses=0009 0009 06:57:28 Msec=0 True Az=64.23 Ze=-68.49 Az status=0009 Ze status=0009 06:57:28 Check angles 06:57:28 SkyScan query 06:57:29 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.91<-17994 Statuses=0009 0009 06:57:29 Msec=750 True Az=82.08 Ze=-89.91 Az status=0009 Ze status=0009 06:57:29 Check angles 06:57:29 SkyScan query 06:57:29 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.895<-19393 Statuses=0009 0009 06:57:29 Msec=1500 True Az=99.6 Ze=-110.895 Az status=0009 Ze status=0009 06:57:29 Check angles 06:57:29 SkyScan query 06:57:30 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.805<-20787 Statuses=0009 0009 06:57:30 Msec=2250 True Az=116.985 Ze=-131.805 Az status=0009 Ze status=0009 06:57:30 Check angles 06:57:30 SkyScan query 06:57:31 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 06:57:31 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 06:57:31 Check angles 06:57:31 SkyScan query 06:57:32 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:57:32 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:57:32 Message to Master queued w/err=0: serial=108425 error=0 06:57:37 Received message from Master: op=Filter serial=108426 06:57:37 Color wheel filter change from 0 to 0 06:57:37 FLIGetFilterPos err=0 currentPosition=0 06:57:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:37 Filter is already there-color wheel unchanged 06:57:37 Received message from Master: op=Shutter serial=108427 06:57:37 Shutter LASER close 06:57:37 Received message from Camera: op=State serial=108429 06:57:37 GetSingleValue result=40 Value=cccccccc 06:57:37 SkyScan query 06:57:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:57:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:37 Parameters OK 06:57:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:37 Set A/D data flow result=40 06:57:37 Set A/D channel type result=40 06:57:37 Set A/D encoding result=40 06:57:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:37 Set channel filter=0.000000e+000 result=40 06:57:37 Config A/D Result=40 06:57:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:37 Get A/D filter: -9.255963e+061 result=40 06:57:37 Get A/D value=-858993460 result=40 06:57:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:37 Parameters OK 06:57:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:37 Set A/D data flow result=40 06:57:37 Set A/D channel type result=40 06:57:37 Set A/D encoding result=40 06:57:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:37 Set channel filter=0.000000e+000 result=40 06:57:37 Config A/D Result=40 06:57:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:37 Get A/D filter: -9.255963e+061 result=40 06:57:37 Get A/D value=-858993460 result=40 06:57:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:37 Aux= 06:57:37 Message to Camera, serial 108429 queued 06:58:14 Received message from Master: op=PointingHead serial=108442 06:58:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:58:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:58:15 Point started: ret=0 06:58:15 point_skyscan result=0 06:58:15 Check angles 06:58:15 SkyScan query 06:58:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 06:58:16 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 06:58:16 Check angles 06:58:16 SkyScan query 06:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:58:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:58:17 Message to Master queued w/err=0: serial=108442 error=0 06:58:22 Received message from Master: op=Filter serial=108443 06:58:22 Color wheel filter change from 0 to 0 06:58:22 FLIGetFilterPos err=0 currentPosition=0 06:58:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:22 Filter is already there-color wheel unchanged 06:58:22 Received message from Master: op=Shutter serial=108444 06:58:22 Shutter LASER open 06:58:22 Received message from Camera: op=State serial=108446 06:58:22 GetSingleValue result=40 Value=cccccccc 06:58:22 SkyScan query 06:58:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:58:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:23 Parameters OK 06:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:23 Set A/D data flow result=40 06:58:23 Set A/D channel type result=40 06:58:23 Set A/D encoding result=40 06:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:23 Set channel filter=0.000000e+000 result=40 06:58:23 Config A/D Result=40 06:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:23 Get A/D filter: -9.255963e+061 result=40 06:58:23 Get A/D value=-858993460 result=40 06:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:23 Parameters OK 06:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:23 Set A/D data flow result=40 06:58:23 Set A/D channel type result=40 06:58:23 Set A/D encoding result=40 06:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:23 Set channel filter=0.000000e+000 result=40 06:58:23 Config A/D Result=40 06:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:23 Get A/D filter: -9.255963e+061 result=40 06:58:23 Get A/D value=-858993460 result=40 06:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:23 Aux= 06:58:23 Message to Camera, serial 108446 queued 06:58:31 Received message from Master: op=Shutter serial=108456 06:58:31 Shutter LASER close 06:58:32 Received message from Master: op=PointingHead serial=108460 06:58:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:58:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:58:32 Point started: ret=0 06:58:32 point_skyscan result=0 06:58:33 Check angles 06:58:33 SkyScan query 06:58:33 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.55<-21570 Statuses=0009 0009 06:58:33 Msec=0 True Az=135.72 Ze=-143.55 Az status=0009 Ze status=0009 06:58:34 Check angles 06:58:34 SkyScan query 06:58:34 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.13<-20142 Statuses=0009 0009 06:58:34 Msec=750 True Az=153.585 Ze=-122.13 Az status=0009 Ze status=0009 06:58:34 Check angles 06:58:34 SkyScan query 06:58:35 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.22<-18748 Statuses=0009 0009 06:58:35 Msec=1500 True Az=171.135 Ze=-101.22 Az status=0009 Ze status=0009 06:58:35 Check angles 06:58:35 SkyScan query 06:58:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.22<-17348 Statuses=0008 0009 06:58:36 Msec=2250 True Az=176.01 Ze=-80.22 Az status=0008 Ze status=0009 06:58:36 Check angles 06:58:36 SkyScan query 06:58:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.845<-15923 Statuses=0008 0009 06:58:36 Msec=3000 True Az=176.01 Ze=-58.845 Az status=0008 Ze status=0009 06:58:37 Check angles 06:58:37 SkyScan query 06:58:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:58:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:58:37 Message to Master queued w/err=0: serial=108460 error=0 06:58:42 Received message from Master: op=Filter serial=108461 06:58:42 Color wheel filter change from 0 to 0 06:58:42 FLIGetFilterPos err=0 currentPosition=0 06:58:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:42 Filter is already there-color wheel unchanged 06:58:42 Received message from Master: op=Shutter serial=108462 06:58:42 Shutter LASER close 06:58:42 Received message from Camera: op=State serial=108464 06:58:42 GetSingleValue result=40 Value=cccccccc 06:58:42 SkyScan query 06:58:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:58:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:43 Parameters OK 06:58:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:43 Set A/D data flow result=40 06:58:43 Set A/D channel type result=40 06:58:43 Set A/D encoding result=40 06:58:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:43 Set channel filter=0.000000e+000 result=40 06:58:43 Config A/D Result=40 06:58:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:43 Get A/D filter: -9.255963e+061 result=40 06:58:43 Get A/D value=-858993460 result=40 06:58:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:43 Parameters OK 06:58:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:43 Set A/D data flow result=40 06:58:43 Set A/D channel type result=40 06:58:43 Set A/D encoding result=40 06:58:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:43 Set channel filter=0.000000e+000 result=40 06:58:43 Config A/D Result=40 06:58:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:43 Get A/D filter: -9.255963e+061 result=40 06:58:43 Get A/D value=-858993460 result=40 06:58:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:43 Aux= 06:58:43 Message to Camera, serial 108464 queued 06:59:20 Received message from Master: op=PointingHead serial=108477 06:59:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:59:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:59:20 Point started: ret=0 06:59:20 point_skyscan result=0 06:59:21 Check angles 06:59:21 SkyScan query 06:59:22 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.765<-13451 Statuses=0009 0009 06:59:22 Msec=0 True Az=152.985 Ze=-21.765 Az status=0009 Ze status=0009 06:59:22 Check angles 06:59:22 SkyScan query 06:59:22 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.795<-12053 Statuses=0009 0009 06:59:22 Msec=750 True Az=135.435 Ze=-0.795 Az status=0009 Ze status=0009 06:59:22 Check angles 06:59:22 SkyScan query 06:59:23 SkyScan query done: ret=0 az=118.035<-7869 ze=20.145<-10657 Statuses=0009 0009 06:59:23 Msec=1500 True Az=118.035 Ze=20.145 Az status=0009 Ze status=0009 06:59:23 Check angles 06:59:23 SkyScan query 06:59:24 SkyScan query done: ret=0 az=100.245<-6683 ze=41.58<-9228 Statuses=0009 0009 06:59:24 Msec=2250 True Az=100.245 Ze=41.58 Az status=0009 Ze status=0009 06:59:24 Check angles 06:59:24 SkyScan query 06:59:25 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:59:25 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:59:25 Check angles 06:59:25 SkyScan query 06:59:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:59:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:59:25 Message to Master queued w/err=0: serial=108477 error=0 06:59:30 Received message from Master: op=Filter serial=108478 06:59:30 Color wheel filter change from 0 to 0 06:59:30 FLIGetFilterPos err=0 currentPosition=0 06:59:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:30 Filter is already there-color wheel unchanged 06:59:30 Received message from Master: op=Shutter serial=108479 06:59:30 Shutter LASER close 06:59:31 Received message from Camera: op=State serial=108481 06:59:31 GetSingleValue result=40 Value=cccccccc 06:59:31 SkyScan query 06:59:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:59:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:31 Parameters OK 06:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:31 Set A/D data flow result=40 06:59:31 Set A/D channel type result=40 06:59:31 Set A/D encoding result=40 06:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:31 Set channel filter=0.000000e+000 result=40 06:59:31 Config A/D Result=40 06:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:31 Get A/D filter: -9.255963e+061 result=40 06:59:31 Get A/D value=-858993460 result=40 06:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:31 Parameters OK 06:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:31 Set A/D data flow result=40 06:59:31 Set A/D channel type result=40 06:59:31 Set A/D encoding result=40 06:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:31 Set channel filter=0.000000e+000 result=40 06:59:31 Config A/D Result=40 06:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:31 Get A/D filter: -9.255963e+061 result=40 06:59:31 Get A/D value=-858993460 result=40 06:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:31 Aux= 06:59:31 Message to Camera, serial 108481 queued 07:00:08 Received message from Master: op=PointingHead serial=108494 07:00:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:00:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:00:08 Point started: ret=0 07:00:08 point_skyscan result=0 07:00:09 Check angles 07:00:09 SkyScan query 07:00:10 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 07:00:10 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 07:00:10 Check angles 07:00:10 SkyScan query 07:00:10 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 07:00:10 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 07:00:11 Check angles 07:00:11 SkyScan query 07:00:11 SkyScan query done: ret=0 az=144<-9600 ze=38.505<-9433 Statuses=0009 0008 07:00:11 Msec=1500 True Az=144 Ze=38.505 Az status=0009 Ze status=0008 07:00:11 Check angles 07:00:11 SkyScan query 07:00:12 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 07:00:12 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 07:00:12 Check angles 07:00:12 SkyScan query 07:00:13 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:00:13 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:00:13 Check angles 07:00:13 SkyScan query 07:00:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:00:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:00:13 Message to Master queued w/err=0: serial=108494 error=0 07:00:18 Received message from Master: op=Filter serial=108495 07:00:18 Color wheel filter change from 0 to 0 07:00:18 FLIGetFilterPos err=0 currentPosition=0 07:00:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:18 Filter is already there-color wheel unchanged 07:00:19 Received message from Master: op=Shutter serial=108496 07:00:19 Shutter LASER close 07:00:19 Received message from Camera: op=State serial=108498 07:00:19 GetSingleValue result=40 Value=cccccccc 07:00:19 SkyScan query 07:00:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:00:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:19 Parameters OK 07:00:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:19 Set A/D data flow result=40 07:00:19 Set A/D channel type result=40 07:00:19 Set A/D encoding result=40 07:00:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:19 Set channel filter=0.000000e+000 result=40 07:00:19 Config A/D Result=40 07:00:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:19 Get A/D filter: -9.255963e+061 result=40 07:00:19 Get A/D value=-858993460 result=40 07:00:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:19 Parameters OK 07:00:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:19 Set A/D data flow result=40 07:00:19 Set A/D channel type result=40 07:00:19 Set A/D encoding result=40 07:00:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:19 Set channel filter=0.000000e+000 result=40 07:00:19 Config A/D Result=40 07:00:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:19 Get A/D filter: -9.255963e+061 result=40 07:00:19 Get A/D value=-858993460 result=40 07:00:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:19 Aux= 07:00:19 Message to Camera, serial 108498 queued 07:00:56 Received message from Master: op=PointingHead serial=108511 07:00:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:00:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:00:56 Point started: ret=0 07:00:56 point_skyscan result=0 07:00:57 Check angles 07:00:57 SkyScan query 07:00:58 SkyScan query done: ret=0 az=152.79<-10186 ze=8.52<-11432 Statuses=0009 0009 07:00:58 Msec=0 True Az=152.79 Ze=8.52 Az status=0009 Ze status=0009 07:00:58 Check angles 07:00:58 SkyScan query 07:00:58 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.42<-12828 Statuses=0009 0009 07:00:58 Msec=750 True Az=135.45 Ze=-12.42 Az status=0009 Ze status=0009 07:00:59 Check angles 07:00:59 SkyScan query 07:00:59 SkyScan query done: ret=0 az=117.495<-7833 ze=-33.825<-14255 Statuses=0009 0009 07:00:59 Msec=1500 True Az=117.495 Ze=-33.825 Az status=0009 Ze status=0009 07:00:59 Check angles 07:00:59 SkyScan query 07:01:00 SkyScan query done: ret=0 az=99.705<-6647 ze=-51.57<-15438 Statuses=0009 0009 07:01:00 Msec=2250 True Az=99.705 Ze=-51.57 Az status=0009 Ze status=0009 07:01:00 Check angles 07:01:00 SkyScan query 07:01:01 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 07:01:01 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 07:01:01 Check angles 07:01:01 SkyScan query 07:01:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:01:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:01:01 Message to Master queued w/err=0: serial=108511 error=0 07:01:06 Received message from Master: op=Filter serial=108512 07:01:06 Color wheel filter change from 0 to 0 07:01:06 FLIGetFilterPos err=0 currentPosition=0 07:01:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:06 Filter is already there-color wheel unchanged 07:01:07 Received message from Master: op=Shutter serial=108513 07:01:07 Shutter LASER close 07:01:07 Received message from Camera: op=State serial=108515 07:01:07 GetSingleValue result=40 Value=cccccccc 07:01:07 SkyScan query 07:01:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:01:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:07 Parameters OK 07:01:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:07 Set A/D data flow result=40 07:01:07 Set A/D channel type result=40 07:01:07 Set A/D encoding result=40 07:01:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:07 Set channel filter=0.000000e+000 result=40 07:01:07 Config A/D Result=40 07:01:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:07 Get A/D filter: -9.255963e+061 result=40 07:01:07 Get A/D value=-858993460 result=40 07:01:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:07 Parameters OK 07:01:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:07 Set A/D data flow result=40 07:01:07 Set A/D channel type result=40 07:01:07 Set A/D encoding result=40 07:01:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:07 Set channel filter=0.000000e+000 result=40 07:01:07 Config A/D Result=40 07:01:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:07 Get A/D filter: -9.255963e+061 result=40 07:01:07 Get A/D value=-858993460 result=40 07:01:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:07 Aux= 07:01:07 Message to Camera, serial 108515 queued 07:01:44 Received message from Master: op=PointingHead serial=108528 07:01:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:01:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:01:44 Point started: ret=0 07:01:44 point_skyscan result=0 07:01:45 Check angles 07:01:45 SkyScan query 07:01:46 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.54<-17436 Statuses=0009 0009 07:01:46 Msec=0 True Az=109.335 Ze=-81.54 Az status=0009 Ze status=0009 07:01:46 Check angles 07:01:46 SkyScan query 07:01:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 07:01:47 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 07:01:47 Check angles 07:01:47 SkyScan query 07:01:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 07:01:47 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 07:01:47 Check angles 07:01:47 SkyScan query 07:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 07:01:48 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 07:01:48 Check angles 07:01:48 SkyScan query 07:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 07:01:49 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 07:01:49 Check angles 07:01:49 SkyScan query 07:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:01:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:01:50 Message to Master queued w/err=0: serial=108528 error=0 07:01:55 Received message from Master: op=Filter serial=108529 07:01:55 Color wheel filter change from 0 to 0 07:01:55 FLIGetFilterPos err=0 currentPosition=0 07:01:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:55 Filter is already there-color wheel unchanged 07:01:55 Received message from Master: op=Shutter serial=108530 07:01:55 Shutter LASER open 07:01:55 Received message from Camera: op=State serial=108532 07:01:55 GetSingleValue result=40 Value=cccccccc 07:01:55 SkyScan query 07:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:56 Parameters OK 07:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:56 Set A/D data flow result=40 07:01:56 Set A/D channel type result=40 07:01:56 Set A/D encoding result=40 07:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:56 Set channel filter=0.000000e+000 result=40 07:01:56 Config A/D Result=40 07:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:56 Get A/D filter: -9.255963e+061 result=40 07:01:56 Get A/D value=-858993460 result=40 07:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:56 Parameters OK 07:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:56 Set A/D data flow result=40 07:01:56 Set A/D channel type result=40 07:01:56 Set A/D encoding result=40 07:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:56 Set channel filter=0.000000e+000 result=40 07:01:56 Config A/D Result=40 07:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:56 Get A/D filter: -9.255963e+061 result=40 07:01:56 Get A/D value=-858993460 result=40 07:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:56 Aux= 07:01:56 Message to Camera, serial 108532 queued 07:02:04 Received message from Master: op=Shutter serial=108542 07:02:04 Shutter LASER close 07:02:04 Received message from Master: op=PointingHead serial=108546 07:02:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:02:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:02:05 Point started: ret=0 07:02:05 point_skyscan result=0 07:02:05 Check angles 07:02:05 SkyScan query 07:02:06 SkyScan query done: ret=0 az=89.88<-5992 ze=157.26<-1516 Statuses=0009 0009 07:02:06 Msec=0 True Az=89.88 Ze=157.26 Az status=0009 Ze status=0009 07:02:06 Check angles 07:02:06 SkyScan query 07:02:07 SkyScan query done: ret=0 az=72.48<-4832 ze=136.275<-2915 Statuses=0009 0009 07:02:07 Msec=750 True Az=72.48 Ze=136.275 Az status=0009 Ze status=0009 07:02:07 Check angles 07:02:07 SkyScan query 07:02:08 SkyScan query done: ret=0 az=54.96<-3664 ze=115.365<-4309 Statuses=0009 0009 07:02:08 Msec=1500 True Az=54.96 Ze=115.365 Az status=0009 Ze status=0009 07:02:08 Check angles 07:02:08 SkyScan query 07:02:08 SkyScan query done: ret=0 az=40.875<-2725 ze=94.35<-5710 Statuses=0009 0009 07:02:08 Msec=2250 True Az=40.875 Ze=94.35 Az status=0009 Ze status=0009 07:02:08 Check angles 07:02:08 SkyScan query 07:02:09 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 07:02:09 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 07:02:09 Check angles 07:02:09 SkyScan query 07:02:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 07:02:10 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 07:02:10 Check angles 07:02:10 SkyScan query 07:02:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:02:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:02:11 Message to Master queued w/err=0: serial=108546 error=0 07:02:16 Received message from Master: op=Filter serial=108547 07:02:16 Color wheel filter change from 0 to 0 07:02:16 FLIGetFilterPos err=0 currentPosition=0 07:02:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:16 Filter is already there-color wheel unchanged 07:02:16 Received message from Master: op=Shutter serial=108548 07:02:16 Shutter LASER close 07:02:16 Received message from Camera: op=State serial=108550 07:02:16 GetSingleValue result=40 Value=cccccccc 07:02:16 SkyScan query 07:02:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:02:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:16 Parameters OK 07:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:16 Set A/D data flow result=40 07:02:16 Set A/D channel type result=40 07:02:16 Set A/D encoding result=40 07:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:16 Set channel filter=0.000000e+000 result=40 07:02:16 Config A/D Result=40 07:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:16 Get A/D filter: -9.255963e+061 result=40 07:02:16 Get A/D value=-858993460 result=40 07:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:16 Parameters OK 07:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:16 Set A/D data flow result=40 07:02:16 Set A/D channel type result=40 07:02:16 Set A/D encoding result=40 07:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:16 Set channel filter=0.000000e+000 result=40 07:02:16 Config A/D Result=40 07:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:16 Get A/D filter: -9.255963e+061 result=40 07:02:16 Get A/D value=-858993460 result=40 07:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:16 Aux= 07:02:16 Message to Camera, serial 108550 queued 07:02:53 Received message from Master: op=PointingHead serial=108563 07:02:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:02:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:02:54 Point started: ret=0 07:02:54 point_skyscan result=0 07:02:54 Check angles 07:02:54 SkyScan query 07:02:55 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 07:02:55 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 07:02:55 Check angles 07:02:55 SkyScan query 07:02:56 SkyScan query done: ret=0 az=82.02<-5468 ze=66.495<-7567 Statuses=0009 0008 07:02:56 Msec=750 True Az=82.02 Ze=66.495 Az status=0009 Ze status=0008 07:02:56 Check angles 07:02:56 SkyScan query 07:02:56 SkyScan query done: ret=0 az=99.645<-6643 ze=66.495<-7567 Statuses=0009 0008 07:02:56 Msec=1500 True Az=99.645 Ze=66.495 Az status=0009 Ze status=0008 07:02:57 Check angles 07:02:57 SkyScan query 07:02:57 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 07:02:57 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 07:02:57 Check angles 07:02:57 SkyScan query 07:02:58 SkyScan query done: ret=0 az=134.61<-8974 ze=66.495<-7567 Statuses=0009 0008 07:02:58 Msec=3000 True Az=134.61 Ze=66.495 Az status=0009 Ze status=0008 07:02:58 Check angles 07:02:58 SkyScan query 07:02:59 SkyScan query done: ret=0 az=151.98<-10132 ze=66.495<-7567 Statuses=0009 0008 07:02:59 Msec=3750 True Az=151.98 Ze=66.495 Az status=0009 Ze status=0008 07:02:59 Check angles 07:02:59 SkyScan query 07:02:59 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 07:02:59 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 07:02:59 Message to Master queued w/err=0: serial=108563 error=0 07:03:04 Received message from Master: op=Filter serial=108564 07:03:04 Color wheel filter change from 0 to 0 07:03:04 FLIGetFilterPos err=0 currentPosition=0 07:03:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:04 Filter is already there-color wheel unchanged 07:03:05 Received message from Master: op=Shutter serial=108565 07:03:05 Shutter LASER close 07:03:05 Received message from Camera: op=State serial=108567 07:03:05 GetSingleValue result=40 Value=cccccccc 07:03:05 SkyScan query 07:03:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:03:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:05 Parameters OK 07:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:05 Set A/D data flow result=40 07:03:05 Set A/D channel type result=40 07:03:05 Set A/D encoding result=40 07:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:05 Set channel filter=0.000000e+000 result=40 07:03:05 Config A/D Result=40 07:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:05 Get A/D filter: -9.255963e+061 result=40 07:03:05 Get A/D value=-858993460 result=40 07:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:05 Parameters OK 07:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:05 Set A/D data flow result=40 07:03:05 Set A/D channel type result=40 07:03:05 Set A/D encoding result=40 07:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:05 Set channel filter=0.000000e+000 result=40 07:03:05 Config A/D Result=40 07:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:05 Get A/D filter: -9.255963e+061 result=40 07:03:05 Get A/D value=-858993460 result=40 07:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:05 Aux= 07:03:05 Message to Camera, serial 108567 queued 07:03:42 Received message from Master: op=PointingHead serial=108580 07:03:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:03:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:03:43 Point started: ret=0 07:03:43 point_skyscan result=0 07:03:43 Check angles 07:03:43 SkyScan query 07:03:44 SkyScan query done: ret=0 az=134.79<-8986 ze=36.645<-9557 Statuses=0009 0009 07:03:44 Msec=0 True Az=134.79 Ze=36.645 Az status=0009 Ze status=0009 07:03:44 Check angles 07:03:44 SkyScan query 07:03:45 SkyScan query done: ret=0 az=117.285<-7819 ze=15.645<-10957 Statuses=0009 0009 07:03:45 Msec=750 True Az=117.285 Ze=15.645 Az status=0009 Ze status=0009 07:03:45 Check angles 07:03:45 SkyScan query 07:03:45 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.28<-12352 Statuses=0009 0009 07:03:45 Msec=1500 True Az=99.915 Ze=-5.28 Az status=0009 Ze status=0009 07:03:46 Check angles 07:03:46 SkyScan query 07:03:46 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.205<-13747 Statuses=0009 0009 07:03:46 Msec=2250 True Az=82.44 Ze=-26.205 Az status=0009 Ze status=0009 07:03:46 Check angles 07:03:46 SkyScan query 07:03:47 SkyScan query done: ret=0 az=65.025<-4335 ze=-38.565<-14571 Statuses=0009 0008 07:03:47 Msec=3000 True Az=65.025 Ze=-38.565 Az status=0009 Ze status=0008 07:03:47 Check angles 07:03:47 SkyScan query 07:03:48 SkyScan query done: ret=0 az=47.595<-3173 ze=-38.535<-14569 Statuses=0009 0008 07:03:48 Msec=3750 True Az=47.595 Ze=-38.535 Az status=0009 Ze status=0008 07:03:48 Check angles 07:03:48 SkyScan query 07:03:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:03:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:03:48 Message to Master queued w/err=0: serial=108580 error=0 07:03:53 Received message from Master: op=Filter serial=108581 07:03:53 Color wheel filter change from 0 to 0 07:03:53 FLIGetFilterPos err=0 currentPosition=0 07:03:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:53 Filter is already there-color wheel unchanged 07:03:54 Received message from Master: op=Shutter serial=108582 07:03:54 Shutter LASER close 07:03:54 Received message from Camera: op=State serial=108584 07:03:54 GetSingleValue result=40 Value=cccccccc 07:03:54 SkyScan query 07:03:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:03:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:54 Parameters OK 07:03:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:54 Set A/D data flow result=40 07:03:54 Set A/D channel type result=40 07:03:54 Set A/D encoding result=40 07:03:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:54 Set channel filter=0.000000e+000 result=40 07:03:54 Config A/D Result=40 07:03:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:54 Get A/D filter: -9.255963e+061 result=40 07:03:54 Get A/D value=-858993460 result=40 07:03:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:54 Parameters OK 07:03:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:54 Set A/D data flow result=40 07:03:54 Set A/D channel type result=40 07:03:54 Set A/D encoding result=40 07:03:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:54 Set channel filter=0.000000e+000 result=40 07:03:54 Config A/D Result=40 07:03:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:54 Get A/D filter: -9.255963e+061 result=40 07:03:54 Get A/D value=-858993460 result=40 07:03:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:54 Aux= 07:03:54 Message to Camera, serial 108584 queued 07:04:31 Received message from Master: op=PointingHead serial=108597 07:04:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:04:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:04:31 Point started: ret=0 07:04:31 point_skyscan result=0 07:04:32 Check angles 07:04:32 SkyScan query 07:04:33 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.61<-16574 Statuses=0009 0009 07:04:33 Msec=0 True Az=64.245 Ze=-68.61 Az status=0009 Ze status=0009 07:04:33 Check angles 07:04:33 SkyScan query 07:04:33 SkyScan query done: ret=0 az=81.69<-5446 ze=-89.58<-17972 Statuses=0009 0009 07:04:33 Msec=750 True Az=81.69 Ze=-89.58 Az status=0009 Ze status=0009 07:04:34 Check angles 07:04:34 SkyScan query 07:04:34 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.535<-19369 Statuses=0009 0009 07:04:34 Msec=1500 True Az=99.24 Ze=-110.535 Az status=0009 Ze status=0009 07:04:34 Check angles 07:04:34 SkyScan query 07:04:35 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.895<-20793 Statuses=0009 0009 07:04:35 Msec=2250 True Az=117.105 Ze=-131.895 Az status=0009 Ze status=0009 07:04:35 Check angles 07:04:35 SkyScan query 07:04:36 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 07:04:36 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 07:04:36 Check angles 07:04:36 SkyScan query 07:04:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:04:36 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:04:36 Message to Master queued w/err=0: serial=108597 error=0 07:04:41 Received message from Master: op=Filter serial=108598 07:04:41 Color wheel filter change from 0 to 0 07:04:41 FLIGetFilterPos err=0 currentPosition=0 07:04:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:41 Filter is already there-color wheel unchanged 07:04:42 Received message from Master: op=Shutter serial=108599 07:04:42 Shutter LASER close 07:04:42 Received message from Camera: op=State serial=108601 07:04:42 GetSingleValue result=40 Value=cccccccc 07:04:42 SkyScan query 07:04:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:04:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:42 Parameters OK 07:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:42 Set A/D data flow result=40 07:04:42 Set A/D channel type result=40 07:04:42 Set A/D encoding result=40 07:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:42 Set channel filter=0.000000e+000 result=40 07:04:42 Config A/D Result=40 07:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:42 Get A/D filter: -9.255963e+061 result=40 07:04:42 Get A/D value=-858993460 result=40 07:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:42 Parameters OK 07:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:42 Set A/D data flow result=40 07:04:42 Set A/D channel type result=40 07:04:42 Set A/D encoding result=40 07:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:42 Set channel filter=0.000000e+000 result=40 07:04:42 Config A/D Result=40 07:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:42 Get A/D filter: -9.255963e+061 result=40 07:04:42 Get A/D value=-858993460 result=40 07:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:42 Aux= 07:04:42 Message to Camera, serial 108601 queued 07:05:19 Received message from Master: op=PointingHead serial=108614 07:05:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:05:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:05:19 Point started: ret=0 07:05:19 point_skyscan result=0 07:05:20 Check angles 07:05:20 SkyScan query 07:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0008 0009 07:05:21 Msec=0 True Az=112.995 Ze=-171.51 Az status=0008 Ze status=0009 07:05:21 Check angles 07:05:21 SkyScan query 07:05:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:05:22 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:05:22 Message to Master queued w/err=0: serial=108614 error=0 07:05:27 Received message from Master: op=Filter serial=108615 07:05:27 Color wheel filter change from 0 to 0 07:05:27 FLIGetFilterPos err=0 currentPosition=0 07:05:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:27 Filter is already there-color wheel unchanged 07:05:27 Received message from Master: op=Shutter serial=108616 07:05:27 Shutter LASER open 07:05:27 Received message from Camera: op=State serial=108618 07:05:27 GetSingleValue result=40 Value=cccccccc 07:05:27 SkyScan query 07:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:05:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:27 Parameters OK 07:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:27 Set A/D data flow result=40 07:05:27 Set A/D channel type result=40 07:05:27 Set A/D encoding result=40 07:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:27 Set channel filter=0.000000e+000 result=40 07:05:27 Config A/D Result=40 07:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:27 Get A/D filter: -9.255963e+061 result=40 07:05:27 Get A/D value=-858993460 result=40 07:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:27 Parameters OK 07:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:27 Set A/D data flow result=40 07:05:27 Set A/D channel type result=40 07:05:27 Set A/D encoding result=40 07:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:27 Set channel filter=0.000000e+000 result=40 07:05:27 Config A/D Result=40 07:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:27 Get A/D filter: -9.255963e+061 result=40 07:05:27 Get A/D value=-858993460 result=40 07:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:27 Aux= 07:05:27 Message to Camera, serial 108618 queued 07:05:35 Received message from Master: op=Shutter serial=108627 07:05:35 Shutter LASER close 07:05:36 Received message from Master: op=PointingHead serial=108631 07:05:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:05:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:05:36 Point started: ret=0 07:05:36 point_skyscan result=0 07:05:37 Check angles 07:05:37 SkyScan query 07:05:37 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.145<-21543 Statuses=0009 0009 07:05:37 Msec=0 True Az=136.02 Ze=-143.145 Az status=0009 Ze status=0009 07:05:37 Check angles 07:05:37 SkyScan query 07:05:38 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.145<-20143 Statuses=0009 0009 07:05:38 Msec=750 True Az=153.57 Ze=-122.145 Az status=0009 Ze status=0009 07:05:38 Check angles 07:05:38 SkyScan query 07:05:39 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.25<-18750 Statuses=0009 0009 07:05:39 Msec=1500 True Az=170.985 Ze=-101.25 Az status=0009 Ze status=0009 07:05:39 Check angles 07:05:39 SkyScan query 07:05:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 07:05:39 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 07:05:40 Check angles 07:05:40 SkyScan query 07:05:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.845<-15923 Statuses=0008 0009 07:05:40 Msec=3000 True Az=176.01 Ze=-58.845 Az status=0008 Ze status=0009 07:05:40 Check angles 07:05:40 SkyScan query 07:05:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:05:41 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:05:41 Message to Master queued w/err=0: serial=108631 error=0 07:05:46 Received message from Master: op=Filter serial=108632 07:05:46 Color wheel filter change from 0 to 0 [UTC 2018-12-13 07:05:46] 07:05:46 FLIGetFilterPos err=0 currentPosition=0 07:05:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:46 Filter is already there-color wheel unchanged 07:05:46 Received message from Master: op=Shutter serial=108633 07:05:46 Shutter LASER close 07:05:46 Received message from Camera: op=State serial=108635 07:05:46 GetSingleValue result=40 Value=cccccccc 07:05:46 SkyScan query 07:05:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:05:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:47 Parameters OK 07:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:47 Set A/D data flow result=40 07:05:47 Set A/D channel type result=40 07:05:47 Set A/D encoding result=40 07:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:47 Set channel filter=0.000000e+000 result=40 07:05:47 Config A/D Result=40 07:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:47 Get A/D filter: -9.255963e+061 result=40 07:05:47 Get A/D value=-858993460 result=40 07:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:47 Parameters OK 07:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:47 Set A/D data flow result=40 07:05:47 Set A/D channel type result=40 07:05:47 Set A/D encoding result=40 07:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:47 Set channel filter=0.000000e+000 result=40 07:05:47 Config A/D Result=40 07:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:47 Get A/D filter: -9.255963e+061 result=40 07:05:47 Get A/D value=-858993460 result=40 07:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:47 Aux= 07:05:47 Message to Camera, serial 108635 queued 07:06:24 Received message from Master: op=PointingHead serial=108648 07:06:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:06:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:06:24 Point started: ret=0 07:06:24 point_skyscan result=0 07:06:25 Check angles 07:06:25 SkyScan query 07:06:25 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.27<-13418 Statuses=0009 0009 07:06:25 Msec=0 True Az=152.655 Ze=-21.27 Az status=0009 Ze status=0009 07:06:26 Check angles 07:06:26 SkyScan query 07:06:26 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.3<-12020 Statuses=0009 0009 07:06:26 Msec=750 True Az=135.15 Ze=-0.3 Az status=0009 Ze status=0009 07:06:26 Check angles 07:06:26 SkyScan query 07:06:27 SkyScan query done: ret=0 az=117.27<-7818 ze=21.075<-10595 Statuses=0009 0009 07:06:27 Msec=1500 True Az=117.27 Ze=21.075 Az status=0009 Ze status=0009 07:06:27 Check angles 07:06:27 SkyScan query 07:06:28 SkyScan query done: ret=0 az=99.915<-6661 ze=42.03<-9198 Statuses=0009 0009 07:06:28 Msec=2250 True Az=99.915 Ze=42.03 Az status=0009 Ze status=0009 07:06:28 Check angles 07:06:28 SkyScan query 07:06:28 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 07:06:28 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 07:06:29 Check angles 07:06:29 SkyScan query 07:06:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:06:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:06:29 Message to Master queued w/err=0: serial=108648 error=0 07:06:34 Received message from Master: op=Filter serial=108649 07:06:34 Color wheel filter change from 0 to 0 07:06:34 FLIGetFilterPos err=0 currentPosition=0 07:06:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:34 Filter is already there-color wheel unchanged 07:06:34 Received message from Master: op=Shutter serial=108650 07:06:34 Shutter LASER close 07:06:34 Received message from Camera: op=State serial=108652 07:06:34 GetSingleValue result=40 Value=cccccccc 07:06:34 SkyScan query 07:06:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:06:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:35 Parameters OK 07:06:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:35 Set A/D data flow result=40 07:06:35 Set A/D channel type result=40 07:06:35 Set A/D encoding result=40 07:06:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:35 Set channel filter=0.000000e+000 result=40 07:06:35 Config A/D Result=40 07:06:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:35 Get A/D filter: -9.255963e+061 result=40 07:06:35 Get A/D value=-858993460 result=40 07:06:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:35 Parameters OK 07:06:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:35 Set A/D data flow result=40 07:06:35 Set A/D channel type result=40 07:06:35 Set A/D encoding result=40 07:06:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:35 Set channel filter=0.000000e+000 result=40 07:06:35 Config A/D Result=40 07:06:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:35 Get A/D filter: -9.255963e+061 result=40 07:06:35 Get A/D value=-858993460 result=40 07:06:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:35 Aux= 07:06:35 Message to Camera, serial 108652 queued 07:07:12 Received message from Master: op=PointingHead serial=108665 07:07:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:07:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:07:12 Point started: ret=0 07:07:12 point_skyscan result=0 07:07:13 Check angles 07:07:13 SkyScan query 07:07:14 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 07:07:14 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 07:07:14 Check angles 07:07:14 SkyScan query 07:07:14 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 07:07:14 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 07:07:14 Check angles 07:07:14 SkyScan query 07:07:15 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 07:07:15 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 07:07:15 Check angles 07:07:15 SkyScan query 07:07:16 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 07:07:16 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 07:07:16 Check angles 07:07:16 SkyScan query 07:07:17 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:07:17 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:07:17 Check angles 07:07:17 SkyScan query 07:07:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:07:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:07:17 Message to Master queued w/err=0: serial=108665 error=0 07:07:22 Received message from Master: op=Filter serial=108666 07:07:22 Color wheel filter change from 0 to 0 07:07:22 FLIGetFilterPos err=0 currentPosition=0 07:07:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:22 Filter is already there-color wheel unchanged 07:07:22 Received message from Master: op=Shutter serial=108667 07:07:22 Shutter LASER close 07:07:23 Received message from Camera: op=State serial=108669 07:07:23 GetSingleValue result=40 Value=cccccccc 07:07:23 SkyScan query 07:07:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:07:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:23 Parameters OK 07:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:23 Set A/D data flow result=40 07:07:23 Set A/D channel type result=40 07:07:23 Set A/D encoding result=40 07:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:23 Set channel filter=0.000000e+000 result=40 07:07:23 Config A/D Result=40 07:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:23 Get A/D filter: -9.255963e+061 result=40 07:07:23 Get A/D value=-858993460 result=40 07:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:23 Parameters OK 07:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:23 Set A/D data flow result=40 07:07:23 Set A/D channel type result=40 07:07:23 Set A/D encoding result=40 07:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:23 Set channel filter=0.000000e+000 result=40 07:07:23 Config A/D Result=40 07:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:23 Get A/D filter: -9.255963e+061 result=40 07:07:23 Get A/D value=-858993460 result=40 07:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:23 Aux= 07:07:23 Message to Camera, serial 108669 queued 07:08:00 Received message from Master: op=PointingHead serial=108682 07:08:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:08:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:08:00 Point started: ret=0 07:08:00 point_skyscan result=0 07:08:01 Check angles 07:08:01 SkyScan query 07:08:02 SkyScan query done: ret=0 az=152.955<-10197 ze=8.58<-11428 Statuses=0009 0009 07:08:02 Msec=0 True Az=152.955 Ze=8.58 Az status=0009 Ze status=0009 07:08:02 Check angles 07:08:02 SkyScan query 07:08:02 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.795<-12853 Statuses=0009 0009 07:08:02 Msec=750 True Az=135.09 Ze=-12.795 Az status=0009 Ze status=0009 07:08:03 Check angles 07:08:03 SkyScan query 07:08:03 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.75<-14250 Statuses=0009 0009 07:08:03 Msec=1500 True Az=117.555 Ze=-33.75 Az status=0009 Ze status=0009 07:08:03 Check angles 07:08:03 SkyScan query 07:08:04 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 07:08:04 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 07:08:04 Check angles 07:08:04 SkyScan query 07:08:05 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:08:05 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:08:05 Check angles 07:08:05 SkyScan query 07:08:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:08:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:08:05 Message to Master queued w/err=0: serial=108682 error=0 07:08:10 Received message from Master: op=Filter serial=108683 07:08:10 Color wheel filter change from 0 to 0 07:08:10 FLIGetFilterPos err=0 currentPosition=0 07:08:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:10 Filter is already there-color wheel unchanged 07:08:11 Received message from Master: op=Shutter serial=108684 07:08:11 Shutter LASER close 07:08:11 Received message from Camera: op=State serial=108686 07:08:11 GetSingleValue result=40 Value=cccccccc 07:08:11 SkyScan query 07:08:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:08:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:11 Parameters OK 07:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:11 Set A/D data flow result=40 07:08:11 Set A/D channel type result=40 07:08:11 Set A/D encoding result=40 07:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:11 Set channel filter=0.000000e+000 result=40 07:08:11 Config A/D Result=40 07:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:11 Get A/D filter: -9.255963e+061 result=40 07:08:11 Get A/D value=-858993460 result=40 07:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:11 Parameters OK 07:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:11 Set A/D data flow result=40 07:08:11 Set A/D channel type result=40 07:08:11 Set A/D encoding result=40 07:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:11 Set channel filter=0.000000e+000 result=40 07:08:11 Config A/D Result=40 07:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:11 Get A/D filter: -9.255963e+061 result=40 07:08:11 Get A/D value=-858993460 result=40 07:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:11 Aux= 07:08:11 Message to Camera, serial 108686 queued 07:08:47 Received message from Master: op=PointingHead serial=108698 07:08:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:08:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:08:47 Point started: ret=0 07:08:47 point_skyscan result=0 07:08:48 Check angles 07:08:48 SkyScan query 07:08:49 SkyScan query done: ret=0 az=109.515<-7301 ze=-81.87<-17458 Statuses=0009 0009 07:08:49 Msec=0 True Az=109.515 Ze=-81.87 Az status=0009 Ze status=0009 07:08:49 Check angles 07:08:49 SkyScan query 07:08:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.245<-18883 Statuses=0008 0009 07:08:50 Msec=750 True Az=112.995 Ze=-103.245 Az status=0008 Ze status=0009 07:08:50 Check angles 07:08:50 SkyScan query 07:08:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.2<-20280 Statuses=0008 0009 07:08:50 Msec=1500 True Az=112.995 Ze=-124.2 Az status=0008 Ze status=0009 07:08:50 Check angles 07:08:50 SkyScan query 07:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 07:08:51 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 07:08:51 Check angles 07:08:51 SkyScan query 07:08:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.08<-23072 Statuses=0008 0009 07:08:52 Msec=3000 True Az=112.995 Ze=-166.08 Az status=0008 Ze status=0009 07:08:52 Check angles 07:08:52 SkyScan query 07:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:08:53 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:08:53 Message to Master queued w/err=0: serial=108698 error=0 07:08:58 Received message from Master: op=Filter serial=108699 07:08:58 Color wheel filter change from 0 to 0 07:08:58 FLIGetFilterPos err=0 currentPosition=0 07:08:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:58 Filter is already there-color wheel unchanged 07:08:58 Received message from Master: op=Shutter serial=108700 07:08:58 Shutter LASER open 07:08:58 Received message from Camera: op=State serial=108702 07:08:58 GetSingleValue result=40 Value=cccccccc 07:08:58 SkyScan query 07:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:08:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:58 Parameters OK 07:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:58 Set A/D data flow result=40 07:08:58 Set A/D channel type result=40 07:08:58 Set A/D encoding result=40 07:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:58 Set channel filter=0.000000e+000 result=40 07:08:58 Config A/D Result=40 07:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:58 Get A/D filter: -9.255963e+061 result=40 07:08:58 Get A/D value=-858993460 result=40 07:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:58 Parameters OK 07:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:58 Set A/D data flow result=40 07:08:58 Set A/D channel type result=40 07:08:58 Set A/D encoding result=40 07:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:58 Set channel filter=0.000000e+000 result=40 07:08:58 Config A/D Result=40 07:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:58 Get A/D filter: -9.255963e+061 result=40 07:08:58 Get A/D value=-858993460 result=40 07:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:58 Aux= 07:08:58 Message to Camera, serial 108702 queued 07:09:07 Received message from Master: op=Shutter serial=108712 07:09:07 Shutter LASER close 07:09:07 Received message from Master: op=PointingHead serial=108716 07:09:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:09:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:09:08 Point started: ret=0 07:09:08 point_skyscan result=0 07:09:08 Check angles 07:09:08 SkyScan query 07:09:09 SkyScan query done: ret=0 az=90.12<-6008 ze=157.44<-1504 Statuses=0009 0009 07:09:09 Msec=0 True Az=90.12 Ze=157.44 Az status=0009 Ze status=0009 07:09:09 Check angles 07:09:09 SkyScan query 07:09:10 SkyScan query done: ret=0 az=72.675<-4845 ze=136.425<-2905 Statuses=0009 0009 07:09:10 Msec=750 True Az=72.675 Ze=136.425 Az status=0009 Ze status=0009 07:09:10 Check angles 07:09:10 SkyScan query 07:09:11 SkyScan query done: ret=0 az=55.14<-3676 ze=115.545<-4297 Statuses=0009 0009 07:09:11 Msec=1500 True Az=55.14 Ze=115.545 Az status=0009 Ze status=0009 07:09:11 Check angles 07:09:11 SkyScan query 07:09:11 SkyScan query done: ret=0 az=40.875<-2725 ze=94.095<-5727 Statuses=0009 0009 07:09:11 Msec=2250 True Az=40.875 Ze=94.095 Az status=0009 Ze status=0009 07:09:11 Check angles 07:09:11 SkyScan query 07:09:12 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 07:09:12 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 07:09:12 Check angles 07:09:12 SkyScan query 07:09:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 07:09:13 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 07:09:13 Check angles 07:09:13 SkyScan query 07:09:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:09:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:09:14 Message to Master queued w/err=0: serial=108716 error=0 07:09:19 Received message from Master: op=Filter serial=108717 07:09:19 Color wheel filter change from 0 to 0 07:09:19 FLIGetFilterPos err=0 currentPosition=0 07:09:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:19 Filter is already there-color wheel unchanged 07:09:19 Received message from Master: op=Shutter serial=108718 07:09:19 Shutter LASER close 07:09:19 Received message from Camera: op=State serial=108720 07:09:19 GetSingleValue result=40 Value=cccccccc 07:09:19 SkyScan query 07:09:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:09:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:19 Parameters OK 07:09:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:19 Set A/D data flow result=40 07:09:19 Set A/D channel type result=40 07:09:19 Set A/D encoding result=40 07:09:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:19 Set channel filter=0.000000e+000 result=40 07:09:19 Config A/D Result=40 07:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:19 Get A/D filter: -9.255963e+061 result=40 07:09:19 Get A/D value=-858993460 result=40 07:09:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:19 Parameters OK 07:09:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:19 Set A/D data flow result=40 07:09:19 Set A/D channel type result=40 07:09:19 Set A/D encoding result=40 07:09:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:19 Set channel filter=0.000000e+000 result=40 07:09:19 Config A/D Result=40 07:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:19 Get A/D filter: -9.255963e+061 result=40 07:09:19 Get A/D value=-858993460 result=40 07:09:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:19 Aux= 07:09:19 Message to Camera, serial 108720 queued 07:09:56 Received message from Master: op=PointingHead serial=108733 07:09:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:09:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:09:57 Point started: ret=0 07:09:57 point_skyscan result=0 07:09:57 Check angles 07:09:57 SkyScan query 07:09:58 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 07:09:58 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 07:09:58 Check angles 07:09:58 SkyScan query 07:09:59 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 07:09:59 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 07:09:59 Check angles 07:09:59 SkyScan query 07:10:00 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 07:10:00 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 07:10:00 Check angles 07:10:00 SkyScan query 07:10:00 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 07:10:00 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 07:10:00 Check angles 07:10:00 SkyScan query 07:10:01 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 07:10:01 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 07:10:01 Check angles 07:10:01 SkyScan query 07:10:02 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 07:10:02 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 07:10:02 Check angles 07:10:02 SkyScan query 07:10:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:10:03 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:10:03 Message to Master queued w/err=0: serial=108733 error=0 07:10:08 Received message from Master: op=Filter serial=108734 07:10:08 Color wheel filter change from 0 to 0 07:10:08 FLIGetFilterPos err=0 currentPosition=0 07:10:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:08 Filter is already there-color wheel unchanged 07:10:08 Received message from Master: op=Shutter serial=108735 07:10:08 Shutter LASER close 07:10:08 Received message from Camera: op=State serial=108737 07:10:08 GetSingleValue result=40 Value=cccccccc 07:10:08 SkyScan query 07:10:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:10:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:08 Parameters OK 07:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:08 Set A/D data flow result=40 07:10:08 Set A/D channel type result=40 07:10:08 Set A/D encoding result=40 07:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:08 Set channel filter=0.000000e+000 result=40 07:10:08 Config A/D Result=40 07:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:08 Get A/D filter: -9.255963e+061 result=40 07:10:08 Get A/D value=-858993460 result=40 07:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:08 Parameters OK 07:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:08 Set A/D data flow result=40 07:10:08 Set A/D channel type result=40 07:10:08 Set A/D encoding result=40 07:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:08 Set channel filter=0.000000e+000 result=40 07:10:08 Config A/D Result=40 07:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:08 Get A/D filter: -9.255963e+061 result=40 07:10:08 Get A/D value=-858993460 result=40 07:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:08 Aux= 07:10:08 Message to Camera, serial 108737 queued 07:10:45 Received message from Master: op=PointingHead serial=108750 07:10:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:10:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:10:45 Point started: ret=0 07:10:45 point_skyscan result=0 07:10:46 Check angles 07:10:46 SkyScan query 07:10:47 SkyScan query done: ret=0 az=134.865<-8991 ze=36.72<-9552 Statuses=0009 0009 07:10:47 Msec=0 True Az=134.865 Ze=36.72 Az status=0009 Ze status=0009 07:10:47 Check angles 07:10:47 SkyScan query 07:10:48 SkyScan query done: ret=0 az=117.525<-7835 ze=15.78<-10948 Statuses=0009 0009 07:10:48 Msec=750 True Az=117.525 Ze=15.78 Az status=0009 Ze status=0009 07:10:48 Check angles 07:10:48 SkyScan query 07:10:48 SkyScan query done: ret=0 az=99.765<-6651 ze=-5.595<-12373 Statuses=0009 0009 07:10:48 Msec=1500 True Az=99.765 Ze=-5.595 Az status=0009 Ze status=0009 07:10:48 Check angles 07:10:48 SkyScan query 07:10:49 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.55<-13770 Statuses=0009 0009 07:10:49 Msec=2250 True Az=82.245 Ze=-26.55 Az status=0009 Ze status=0009 07:10:49 Check angles 07:10:49 SkyScan query 07:10:50 SkyScan query done: ret=0 az=64.71<-4314 ze=-38.565<-14571 Statuses=0009 0008 07:10:50 Msec=3000 True Az=64.71 Ze=-38.565 Az status=0009 Ze status=0008 07:10:50 Check angles 07:10:50 SkyScan query 07:10:51 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.535<-14569 Statuses=0009 0008 07:10:51 Msec=3750 True Az=46.98 Ze=-38.535 Az status=0009 Ze status=0008 07:10:51 Check angles 07:10:51 SkyScan query 07:10:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:10:51 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:10:51 Message to Master queued w/err=0: serial=108750 error=0 07:10:56 Received message from Master: op=Filter serial=108751 07:10:56 Color wheel filter change from 0 to 0 07:10:56 FLIGetFilterPos err=0 currentPosition=0 07:10:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:56 Filter is already there-color wheel unchanged 07:10:57 Received message from Master: op=Shutter serial=108752 07:10:57 Shutter LASER close 07:10:57 Received message from Camera: op=State serial=108754 07:10:57 GetSingleValue result=40 Value=cccccccc 07:10:57 SkyScan query 07:10:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:10:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:57 Parameters OK 07:10:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:57 Set A/D data flow result=40 07:10:57 Set A/D channel type result=40 07:10:57 Set A/D encoding result=40 07:10:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:57 Set channel filter=0.000000e+000 result=40 07:10:57 Config A/D Result=40 07:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:57 Get A/D filter: -9.255963e+061 result=40 07:10:57 Get A/D value=-858993460 result=40 07:10:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:57 Parameters OK 07:10:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:57 Set A/D data flow result=40 07:10:57 Set A/D channel type result=40 07:10:57 Set A/D encoding result=40 07:10:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:57 Set channel filter=0.000000e+000 result=40 07:10:57 Config A/D Result=40 07:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:57 Get A/D filter: -9.255963e+061 result=40 07:10:57 Get A/D value=-858993460 result=40 07:10:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:57 Aux= 07:10:57 Message to Camera, serial 108754 queued 07:11:34 Received message from Master: op=PointingHead serial=108767 07:11:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:11:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:11:34 Point started: ret=0 07:11:34 point_skyscan result=0 07:11:35 Check angles 07:11:35 SkyScan query 07:11:36 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.73<-16582 Statuses=0009 0009 07:11:36 Msec=0 True Az=64.425 Ze=-68.73 Az status=0009 Ze status=0009 07:11:36 Check angles 07:11:36 SkyScan query 07:11:36 SkyScan query done: ret=0 az=82.14<-5476 ze=-90.105<-18007 Statuses=0009 0009 07:11:36 Msec=750 True Az=82.14 Ze=-90.105 Az status=0009 Ze status=0009 07:11:37 Check angles 07:11:37 SkyScan query 07:11:37 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.075<-19405 Statuses=0009 0009 07:11:37 Msec=1500 True Az=99.705 Ze=-111.075 Az status=0009 Ze status=0009 07:11:37 Check angles 07:11:37 SkyScan query 07:11:38 SkyScan query done: ret=0 az=117.57<-7838 ze=-132.39<-20826 Statuses=0009 0009 07:11:38 Msec=2250 True Az=117.57 Ze=-132.39 Az status=0009 Ze status=0009 07:11:38 Check angles 07:11:38 SkyScan query 07:11:39 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 07:11:39 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 07:11:39 Check angles 07:11:39 SkyScan query 07:11:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:11:39 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:11:39 Message to Master queued w/err=0: serial=108767 error=0 07:11:44 Received message from Master: op=Filter serial=108768 07:11:44 Color wheel filter change from 0 to 0 07:11:44 FLIGetFilterPos err=0 currentPosition=0 07:11:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:44 Filter is already there-color wheel unchanged 07:11:45 Received message from Master: op=Shutter serial=108769 07:11:45 Shutter LASER close 07:11:45 Received message from Camera: op=State serial=108771 07:11:45 GetSingleValue result=40 Value=cccccccc 07:11:45 SkyScan query 07:11:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:11:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:45 Parameters OK 07:11:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:45 Set A/D data flow result=40 07:11:45 Set A/D channel type result=40 07:11:45 Set A/D encoding result=40 07:11:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:45 Set channel filter=0.000000e+000 result=40 07:11:45 Config A/D Result=40 07:11:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:45 Get A/D filter: -9.255963e+061 result=40 07:11:45 Get A/D value=-858993460 result=40 07:11:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:45 Parameters OK 07:11:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:45 Set A/D data flow result=40 07:11:45 Set A/D channel type result=40 07:11:45 Set A/D encoding result=40 07:11:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:45 Set channel filter=0.000000e+000 result=40 07:11:45 Config A/D Result=40 07:11:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:45 Get A/D filter: -9.255963e+061 result=40 07:11:45 Get A/D value=-858993460 result=40 07:11:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:45 Aux= 07:11:45 Message to Camera, serial 108771 queued 07:12:22 Received message from Master: op=PointingHead serial=108784 07:12:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:12:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:12:22 Point started: ret=0 07:12:22 point_skyscan result=0 07:12:23 Check angles 07:12:23 SkyScan query 07:12:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0008 0009 07:12:24 Msec=0 True Az=112.995 Ze=-171.51 Az status=0008 Ze status=0009 07:12:24 Check angles 07:12:24 SkyScan query 07:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:12:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:12:25 Message to Master queued w/err=0: serial=108784 error=0 07:12:30 Received message from Master: op=Filter serial=108785 07:12:30 Color wheel filter change from 0 to 0 07:12:30 FLIGetFilterPos err=0 currentPosition=0 07:12:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:30 Filter is already there-color wheel unchanged 07:12:30 Received message from Master: op=Shutter serial=108786 07:12:30 Shutter LASER open 07:12:30 Received message from Camera: op=State serial=108788 07:12:30 GetSingleValue result=40 Value=cccccccc 07:12:30 SkyScan query 07:12:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:12:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:30 Parameters OK 07:12:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:30 Set A/D data flow result=40 07:12:30 Set A/D channel type result=40 07:12:30 Set A/D encoding result=40 07:12:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:30 Set channel filter=0.000000e+000 result=40 07:12:30 Config A/D Result=40 07:12:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:30 Get A/D filter: -9.255963e+061 result=40 07:12:30 Get A/D value=-858993460 result=40 07:12:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:30 Parameters OK 07:12:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:30 Set A/D data flow result=40 07:12:30 Set A/D channel type result=40 07:12:30 Set A/D encoding result=40 07:12:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:30 Set channel filter=0.000000e+000 result=40 07:12:30 Config A/D Result=40 07:12:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:30 Get A/D filter: -9.255963e+061 result=40 07:12:30 Get A/D value=-858993460 result=40 07:12:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:30 Aux= 07:12:30 Message to Camera, serial 108788 queued 07:12:39 Received message from Master: op=Shutter serial=108798 07:12:39 Shutter LASER close 07:12:40 Received message from Master: op=PointingHead serial=108802 07:12:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:12:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:12:40 Point started: ret=0 07:12:40 point_skyscan result=0 07:12:41 Check angles 07:12:41 SkyScan query 07:12:41 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.325<-21555 Statuses=0009 0009 07:12:41 Msec=0 True Az=135.885 Ze=-143.325 Az status=0009 Ze status=0009 07:12:41 Check angles 07:12:41 SkyScan query 07:12:42 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.355<-20157 Statuses=0009 0009 07:12:42 Msec=750 True Az=153.36 Ze=-122.355 Az status=0009 Ze status=0009 07:12:42 Check angles 07:12:42 SkyScan query 07:12:43 SkyScan query done: ret=0 az=170.88<-11392 ze=-101.46<-18764 Statuses=0009 0009 07:12:43 Msec=1500 True Az=170.88 Ze=-101.46 Az status=0009 Ze status=0009 07:12:43 Check angles 07:12:43 SkyScan query 07:12:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.46<-17364 Statuses=0008 0009 07:12:44 Msec=2250 True Az=176.01 Ze=-80.46 Az status=0008 Ze status=0009 07:12:44 Check angles 07:12:44 SkyScan query 07:12:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.52<-15968 Statuses=0008 0009 07:12:44 Msec=3000 True Az=176.01 Ze=-59.52 Az status=0008 Ze status=0009 07:12:44 Check angles 07:12:44 SkyScan query 07:12:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:12:45 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:12:45 Message to Master queued w/err=0: serial=108802 error=0 07:12:50 Received message from Master: op=Filter serial=108803 07:12:50 Color wheel filter change from 0 to 0 07:12:50 FLIGetFilterPos err=0 currentPosition=0 07:12:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:50 Filter is already there-color wheel unchanged 07:12:50 Received message from Master: op=Shutter serial=108804 07:12:50 Shutter LASER close 07:12:50 Received message from Camera: op=State serial=108806 07:12:50 GetSingleValue result=40 Value=cccccccc 07:12:50 SkyScan query 07:12:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:12:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:51 Parameters OK 07:12:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:51 Set A/D data flow result=40 07:12:51 Set A/D channel type result=40 07:12:51 Set A/D encoding result=40 07:12:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:51 Set channel filter=0.000000e+000 result=40 07:12:51 Config A/D Result=40 07:12:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:51 Get A/D filter: -9.255963e+061 result=40 07:12:51 Get A/D value=-858993460 result=40 07:12:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:51 Parameters OK 07:12:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:51 Set A/D data flow result=40 07:12:51 Set A/D channel type result=40 07:12:51 Set A/D encoding result=40 07:12:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:51 Set channel filter=0.000000e+000 result=40 07:12:51 Config A/D Result=40 07:12:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:51 Get A/D filter: -9.255963e+061 result=40 07:12:51 Get A/D value=-858993460 result=40 07:12:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:51 Aux= 07:12:51 Message to Camera, serial 108806 queued 07:13:28 Received message from Master: op=PointingHead serial=108819 07:13:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:13:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:13:28 Point started: ret=0 07:13:28 point_skyscan result=0 07:13:29 Check angles 07:13:29 SkyScan query 07:13:29 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.51<-13434 Statuses=0009 0009 07:13:29 Msec=0 True Az=152.775 Ze=-21.51 Az status=0009 Ze status=0009 07:13:30 Check angles 07:13:30 SkyScan query 07:13:30 SkyScan query done: ret=0 az=134.925<-8995 ze=-0.105<-12007 Statuses=0009 0009 07:13:30 Msec=750 True Az=134.925 Ze=-0.105 Az status=0009 Ze status=0009 07:13:30 Check angles 07:13:30 SkyScan query 07:13:31 SkyScan query done: ret=0 az=117.45<-7830 ze=20.865<-10609 Statuses=0009 0009 07:13:31 Msec=1500 True Az=117.45 Ze=20.865 Az status=0009 Ze status=0009 07:13:31 Check angles 07:13:31 SkyScan query 07:13:32 SkyScan query done: ret=0 az=100.095<-6673 ze=41.82<-9212 Statuses=0009 0009 07:13:32 Msec=2250 True Az=100.095 Ze=41.82 Az status=0009 Ze status=0009 07:13:32 Check angles 07:13:32 SkyScan query 07:13:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 07:13:32 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 07:13:33 Check angles 07:13:33 SkyScan query 07:13:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:13:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:13:33 Message to Master queued w/err=0: serial=108819 error=0 07:13:38 Received message from Master: op=Filter serial=108820 07:13:38 Color wheel filter change from 0 to 0 07:13:38 FLIGetFilterPos err=0 currentPosition=0 07:13:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:38 Filter is already there-color wheel unchanged 07:13:38 Received message from Master: op=Shutter serial=108821 07:13:38 Shutter LASER close 07:13:38 Received message from Camera: op=State serial=108823 07:13:38 GetSingleValue result=40 Value=cccccccc 07:13:38 SkyScan query 07:13:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:13:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:39 Parameters OK 07:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:39 Set A/D data flow result=40 07:13:39 Set A/D channel type result=40 07:13:39 Set A/D encoding result=40 07:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:39 Set channel filter=0.000000e+000 result=40 07:13:39 Config A/D Result=40 07:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:39 Get A/D filter: -9.255963e+061 result=40 07:13:39 Get A/D value=-858993460 result=40 07:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:39 Parameters OK 07:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:39 Set A/D data flow result=40 07:13:39 Set A/D channel type result=40 07:13:39 Set A/D encoding result=40 07:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:39 Set channel filter=0.000000e+000 result=40 07:13:39 Config A/D Result=40 07:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:39 Get A/D filter: -9.255963e+061 result=40 07:13:39 Get A/D value=-858993460 result=40 07:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:39 Aux= 07:13:39 Message to Camera, serial 108823 queued 07:14:16 Received message from Master: op=PointingHead serial=108836 07:14:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:14:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:14:16 Point started: ret=0 07:14:16 point_skyscan result=0 07:14:17 Check angles 07:14:17 SkyScan query 07:14:18 SkyScan query done: ret=0 az=109.32<-7288 ze=38.49<-9434 Statuses=0009 0008 07:14:18 Msec=0 True Az=109.32 Ze=38.49 Az status=0009 Ze status=0008 07:14:18 Check angles 07:14:18 SkyScan query 07:14:18 SkyScan query done: ret=0 az=127.155<-8477 ze=38.505<-9433 Statuses=0009 0008 07:14:18 Msec=750 True Az=127.155 Ze=38.505 Az status=0009 Ze status=0008 07:14:18 Check angles 07:14:18 SkyScan query 07:14:19 SkyScan query done: ret=0 az=144.585<-9639 ze=38.505<-9433 Statuses=0009 0008 07:14:19 Msec=1500 True Az=144.585 Ze=38.505 Az status=0009 Ze status=0008 07:14:19 Check angles 07:14:19 SkyScan query 07:14:20 SkyScan query done: ret=0 az=162.435<-10829 ze=38.505<-9433 Statuses=0009 0008 07:14:20 Msec=2250 True Az=162.435 Ze=38.505 Az status=0009 Ze status=0008 07:14:20 Check angles 07:14:20 SkyScan query 07:14:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:14:21 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:14:21 Check angles 07:14:21 SkyScan query 07:14:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:14:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:14:21 Message to Master queued w/err=0: serial=108836 error=0 07:14:26 Received message from Master: op=Filter serial=108837 07:14:26 Color wheel filter change from 0 to 0 07:14:26 FLIGetFilterPos err=0 currentPosition=0 07:14:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:26 Filter is already there-color wheel unchanged 07:14:27 Received message from Master: op=Shutter serial=108838 07:14:27 Shutter LASER close 07:14:27 Received message from Camera: op=State serial=108840 07:14:27 GetSingleValue result=40 Value=cccccccc 07:14:27 SkyScan query 07:14:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:14:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:27 Parameters OK 07:14:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:27 Set A/D data flow result=40 07:14:27 Set A/D channel type result=40 07:14:27 Set A/D encoding result=40 07:14:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:27 Set channel filter=0.000000e+000 result=40 07:14:27 Config A/D Result=40 07:14:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:27 Get A/D filter: -9.255963e+061 result=40 07:14:27 Get A/D value=-858993460 result=40 07:14:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:27 Parameters OK 07:14:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:27 Set A/D data flow result=40 07:14:27 Set A/D channel type result=40 07:14:27 Set A/D encoding result=40 07:14:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:27 Set channel filter=0.000000e+000 result=40 07:14:27 Config A/D Result=40 07:14:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:27 Get A/D filter: -9.255963e+061 result=40 07:14:27 Get A/D value=-858993460 result=40 07:14:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:27 Aux= 07:14:27 Message to Camera, serial 108840 queued 07:15:04 Received message from Master: op=PointingHead serial=108853 07:15:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:15:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:15:04 Point started: ret=0 07:15:04 point_skyscan result=0 07:15:05 Check angles 07:15:05 SkyScan query 07:15:06 SkyScan query done: ret=0 az=153.21<-10214 ze=8.91<-11406 Statuses=0009 0009 07:15:06 Msec=0 True Az=153.21 Ze=8.91 Az status=0009 Ze status=0009 07:15:06 Check angles 07:15:06 SkyScan query 07:15:06 SkyScan query done: ret=0 az=135.795<-9053 ze=-12.075<-12805 Statuses=0009 0009 07:15:06 Msec=750 True Az=135.795 Ze=-12.075 Az status=0009 Ze status=0009 07:15:07 Check angles 07:15:07 SkyScan query 07:15:07 SkyScan query done: ret=0 az=118.2<-7880 ze=-32.97<-14198 Statuses=0009 0009 07:15:07 Msec=1500 True Az=118.2 Ze=-32.97 Az status=0009 Ze status=0009 07:15:07 Check angles 07:15:07 SkyScan query 07:15:08 SkyScan query done: ret=0 az=100.785<-6719 ze=-51.51<-15434 Statuses=0009 0009 07:15:08 Msec=2250 True Az=100.785 Ze=-51.51 Az status=0009 Ze status=0009 07:15:08 Check angles 07:15:08 SkyScan query 07:15:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:15:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:15:09 Check angles 07:15:09 SkyScan query 07:15:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:15:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:15:09 Message to Master queued w/err=0: serial=108853 error=0 07:15:14 Received message from Master: op=Filter serial=108854 07:15:14 Color wheel filter change from 0 to 0 07:15:14 FLIGetFilterPos err=0 currentPosition=0 07:15:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:14 Filter is already there-color wheel unchanged 07:15:15 Received message from Master: op=Shutter serial=108855 07:15:15 Shutter LASER close 07:15:15 Received message from Camera: op=State serial=108857 07:15:15 GetSingleValue result=40 Value=cccccccc 07:15:15 SkyScan query 07:15:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:15:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:15 Parameters OK 07:15:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:15 Set A/D data flow result=40 07:15:15 Set A/D channel type result=40 07:15:15 Set A/D encoding result=40 07:15:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:15 Set channel filter=0.000000e+000 result=40 07:15:15 Config A/D Result=40 07:15:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:15 Get A/D filter: -9.255963e+061 result=40 07:15:15 Get A/D value=-858993460 result=40 07:15:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:15 Parameters OK 07:15:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:15 Set A/D data flow result=40 07:15:15 Set A/D channel type result=40 07:15:15 Set A/D encoding result=40 07:15:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:15 Set channel filter=0.000000e+000 result=40 07:15:15 Config A/D Result=40 07:15:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:15 Get A/D filter: -9.255963e+061 result=40 07:15:15 Get A/D value=-858993460 result=40 07:15:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:15 Aux= 07:15:15 Message to Camera, serial 108857 queued 07:15:27 Received message from Master: op=Identify serial=108858 07:15:52 Received message from Master: op=PointingHead serial=108873 07:15:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:15:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:15:52 Point started: ret=0 07:15:52 point_skyscan result=0 [UTC 2018-12-13 07:15:52] 07:15:53 Check angles 07:15:53 SkyScan query 07:15:54 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.735<-17449 Statuses=0009 0009 07:15:54 Msec=0 True Az=109.35 Ze=-81.735 Az status=0009 Ze status=0009 07:15:54 Check angles 07:15:54 SkyScan query 07:15:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.14<-18876 Statuses=0008 0009 07:15:54 Msec=750 True Az=112.995 Ze=-103.14 Az status=0008 Ze status=0009 07:15:55 Check angles 07:15:55 SkyScan query 07:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.065<-20271 Statuses=0008 0009 07:15:55 Msec=1500 True Az=112.995 Ze=-124.065 Az status=0008 Ze status=0009 07:15:55 Check angles 07:15:55 SkyScan query 07:15:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 07:15:56 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 07:15:56 Check angles 07:15:56 SkyScan query 07:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 07:15:57 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 07:15:57 Check angles 07:15:57 SkyScan query 07:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:15:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:15:57 Message to Master queued w/err=0: serial=108873 error=0 07:16:02 Received message from Master: op=Filter serial=108874 07:16:02 Color wheel filter change from 0 to 0 07:16:02 FLIGetFilterPos err=0 currentPosition=0 07:16:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:02 Filter is already there-color wheel unchanged 07:16:03 Received message from Master: op=Shutter serial=108875 07:16:03 Shutter LASER open 07:16:03 Received message from Camera: op=State serial=108877 07:16:03 GetSingleValue result=40 Value=cccccccc 07:16:03 SkyScan query 07:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:16:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:03 Parameters OK 07:16:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:03 Set A/D data flow result=40 07:16:03 Set A/D channel type result=40 07:16:03 Set A/D encoding result=40 07:16:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:03 Set channel filter=0.000000e+000 result=40 07:16:03 Config A/D Result=40 07:16:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:03 Get A/D filter: -9.255963e+061 result=40 07:16:03 Get A/D value=-858993460 result=40 07:16:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:03 Parameters OK 07:16:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:03 Set A/D data flow result=40 07:16:03 Set A/D channel type result=40 07:16:03 Set A/D encoding result=40 07:16:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:03 Set channel filter=0.000000e+000 result=40 07:16:03 Config A/D Result=40 07:16:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:03 Get A/D filter: -9.255963e+061 result=40 07:16:03 Get A/D value=-858993460 result=40 07:16:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:03 Aux= 07:16:03 Message to Camera, serial 108877 queued 07:16:12 Received message from Master: op=Shutter serial=108887 07:16:12 Shutter LASER close 07:16:12 Received message from Master: op=PointingHead serial=108891 07:16:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:16:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:16:13 Point started: ret=0 07:16:13 point_skyscan result=0 07:16:13 Check angles 07:16:13 SkyScan query 07:16:14 SkyScan query done: ret=0 az=90.105<-6007 ze=157.53<-1498 Statuses=0009 0009 07:16:14 Msec=0 True Az=90.105 Ze=157.53 Az status=0009 Ze status=0009 07:16:14 Check angles 07:16:14 SkyScan query 07:16:15 SkyScan query done: ret=0 az=72.675<-4845 ze=136.545<-2897 Statuses=0009 0009 07:16:15 Msec=750 True Az=72.675 Ze=136.545 Az status=0009 Ze status=0009 07:16:15 Check angles 07:16:15 SkyScan query 07:16:15 SkyScan query done: ret=0 az=55.17<-3678 ze=115.62<-4292 Statuses=0009 0009 07:16:15 Msec=1500 True Az=55.17 Ze=115.62 Az status=0009 Ze status=0009 07:16:16 Check angles 07:16:16 SkyScan query 07:16:16 SkyScan query done: ret=0 az=40.875<-2725 ze=94.2<-5720 Statuses=0009 0009 07:16:16 Msec=2250 True Az=40.875 Ze=94.2 Az status=0009 Ze status=0009 07:16:16 Check angles 07:16:16 SkyScan query 07:16:17 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 07:16:17 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 07:16:17 Check angles 07:16:17 SkyScan query 07:16:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 07:16:18 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 07:16:18 Check angles 07:16:18 SkyScan query 07:16:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:16:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:16:18 Message to Master queued w/err=0: serial=108891 error=0 07:16:23 Received message from Master: op=Filter serial=108892 07:16:23 Color wheel filter change from 0 to 0 07:16:23 FLIGetFilterPos err=0 currentPosition=0 07:16:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:23 Filter is already there-color wheel unchanged 07:16:24 Received message from Master: op=Shutter serial=108893 07:16:24 Shutter LASER close 07:16:24 Received message from Camera: op=State serial=108895 07:16:24 GetSingleValue result=40 Value=cccccccc 07:16:24 SkyScan query 07:16:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:16:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:24 Parameters OK 07:16:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:24 Set A/D data flow result=40 07:16:24 Set A/D channel type result=40 07:16:24 Set A/D encoding result=40 07:16:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:24 Set channel filter=0.000000e+000 result=40 07:16:24 Config A/D Result=40 07:16:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:24 Get A/D filter: -9.255963e+061 result=40 07:16:24 Get A/D value=-858993460 result=40 07:16:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:24 Parameters OK 07:16:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:24 Set A/D data flow result=40 07:16:24 Set A/D channel type result=40 07:16:24 Set A/D encoding result=40 07:16:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:24 Set channel filter=0.000000e+000 result=40 07:16:24 Config A/D Result=40 07:16:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:24 Get A/D filter: -9.255963e+061 result=40 07:16:24 Get A/D value=-858993460 result=40 07:16:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:24 Aux= 07:16:24 Message to Camera, serial 108895 queued 07:17:01 Received message from Master: op=PointingHead serial=108908 07:17:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:17:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:17:02 Point started: ret=0 07:17:02 point_skyscan result=0 07:17:02 Check angles 07:17:02 SkyScan query 07:17:03 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 07:17:03 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 07:17:03 Check angles 07:17:03 SkyScan query 07:17:04 SkyScan query done: ret=0 az=81.3<-5420 ze=66.495<-7567 Statuses=0009 0008 07:17:04 Msec=750 True Az=81.3 Ze=66.495 Az status=0009 Ze status=0008 07:17:04 Check angles 07:17:04 SkyScan query 07:17:04 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 07:17:04 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 07:17:05 Check angles 07:17:05 SkyScan query 07:17:05 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 07:17:05 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 07:17:05 Check angles 07:17:05 SkyScan query 07:17:06 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 07:17:06 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 07:17:06 Check angles 07:17:06 SkyScan query 07:17:07 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 07:17:07 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 07:17:07 Check angles 07:17:07 SkyScan query 07:17:07 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 07:17:07 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 07:17:07 Message to Master queued w/err=0: serial=108908 error=0 07:17:12 Received message from Master: op=Filter serial=108909 07:17:12 Color wheel filter change from 0 to 0 07:17:12 FLIGetFilterPos err=0 currentPosition=0 07:17:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:12 Filter is already there-color wheel unchanged 07:17:13 Received message from Master: op=Shutter serial=108910 07:17:13 Shutter LASER close 07:17:13 Received message from Camera: op=State serial=108912 07:17:13 GetSingleValue result=40 Value=cccccccc 07:17:13 SkyScan query 07:17:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:17:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:13 Parameters OK 07:17:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:13 Set A/D data flow result=40 07:17:13 Set A/D channel type result=40 07:17:13 Set A/D encoding result=40 07:17:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:13 Set channel filter=0.000000e+000 result=40 07:17:13 Config A/D Result=40 07:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:13 Get A/D filter: -9.255963e+061 result=40 07:17:13 Get A/D value=-858993460 result=40 07:17:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:13 Parameters OK 07:17:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:13 Set A/D data flow result=40 07:17:13 Set A/D channel type result=40 07:17:13 Set A/D encoding result=40 07:17:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:13 Set channel filter=0.000000e+000 result=40 07:17:13 Config A/D Result=40 07:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:13 Get A/D filter: -9.255963e+061 result=40 07:17:13 Get A/D value=-858993460 result=40 07:17:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:13 Aux= 07:17:13 Message to Camera, serial 108912 queued 07:17:50 Received message from Master: op=PointingHead serial=108925 07:17:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:17:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:17:50 Point started: ret=0 07:17:50 point_skyscan result=0 07:17:51 Check angles 07:17:51 SkyScan query 07:17:52 SkyScan query done: ret=0 az=134.64<-8976 ze=36.465<-9569 Statuses=0009 0009 07:17:52 Msec=0 True Az=134.64 Ze=36.465 Az status=0009 Ze status=0009 07:17:52 Check angles 07:17:52 SkyScan query 07:17:53 SkyScan query done: ret=0 az=116.925<-7795 ze=15.12<-10992 Statuses=0009 0009 07:17:53 Msec=750 True Az=116.925 Ze=15.12 Az status=0009 Ze status=0009 07:17:53 Check angles 07:17:53 SkyScan query 07:17:53 SkyScan query done: ret=0 az=99.54<-6636 ze=-5.865<-12391 Statuses=0009 0009 07:17:53 Msec=1500 True Az=99.54 Ze=-5.865 Az status=0009 Ze status=0009 07:17:54 Check angles 07:17:54 SkyScan query 07:17:54 SkyScan query done: ret=0 az=82.065<-5471 ze=-26.82<-13788 Statuses=0009 0009 07:17:54 Msec=2250 True Az=82.065 Ze=-26.82 Az status=0009 Ze status=0009 07:17:54 Check angles 07:17:54 SkyScan query 07:17:55 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.565<-14571 Statuses=0009 0008 07:17:55 Msec=3000 True Az=64.485 Ze=-38.565 Az status=0009 Ze status=0008 07:17:55 Check angles 07:17:55 SkyScan query 07:17:56 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.535<-14569 Statuses=0009 0008 07:17:56 Msec=3750 True Az=47.115 Ze=-38.535 Az status=0009 Ze status=0008 07:17:56 Check angles 07:17:56 SkyScan query 07:17:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:17:56 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:17:56 Message to Master queued w/err=0: serial=108925 error=0 07:18:01 Received message from Master: op=Filter serial=108926 07:18:01 Color wheel filter change from 0 to 0 07:18:01 FLIGetFilterPos err=0 currentPosition=0 07:18:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:01 Filter is already there-color wheel unchanged 07:18:02 Received message from Master: op=Shutter serial=108927 07:18:02 Shutter LASER close 07:18:02 Received message from Camera: op=State serial=108929 07:18:02 GetSingleValue result=40 Value=cccccccc 07:18:02 SkyScan query 07:18:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:18:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:02 Parameters OK 07:18:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:02 Set A/D data flow result=40 07:18:02 Set A/D channel type result=40 07:18:02 Set A/D encoding result=40 07:18:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:02 Set channel filter=0.000000e+000 result=40 07:18:02 Config A/D Result=40 07:18:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:02 Get A/D filter: -9.255963e+061 result=40 07:18:02 Get A/D value=-858993460 result=40 07:18:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:02 Parameters OK 07:18:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:02 Set A/D data flow result=40 07:18:02 Set A/D channel type result=40 07:18:02 Set A/D encoding result=40 07:18:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:02 Set channel filter=0.000000e+000 result=40 07:18:02 Config A/D Result=40 07:18:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:02 Get A/D filter: -9.255963e+061 result=40 07:18:02 Get A/D value=-858993460 result=40 07:18:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:02 Aux= 07:18:02 Message to Camera, serial 108929 queued 07:18:39 Received message from Master: op=PointingHead serial=108942 07:18:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:18:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:18:39 Point started: ret=0 07:18:39 point_skyscan result=0 07:18:40 Check angles 07:18:40 SkyScan query 07:18:41 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.73<-16582 Statuses=0009 0009 07:18:41 Msec=0 True Az=64.41 Ze=-68.73 Az status=0009 Ze status=0009 07:18:41 Check angles 07:18:41 SkyScan query 07:18:41 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.685<-17979 Statuses=0009 0009 07:18:41 Msec=750 True Az=81.81 Ze=-89.685 Az status=0009 Ze status=0009 07:18:42 Check angles 07:18:42 SkyScan query 07:18:42 SkyScan query done: ret=0 az=99.69<-6646 ze=-111.075<-19405 Statuses=0009 0009 07:18:42 Msec=1500 True Az=99.69 Ze=-111.075 Az status=0009 Ze status=0009 07:18:42 Check angles 07:18:42 SkyScan query 07:18:43 SkyScan query done: ret=0 az=117.33<-7822 ze=-132.015<-20801 Statuses=0009 0009 07:18:43 Msec=2250 True Az=117.33 Ze=-132.015 Az status=0009 Ze status=0009 07:18:43 Check angles 07:18:43 SkyScan query 07:18:44 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 07:18:44 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 07:18:44 Check angles 07:18:44 SkyScan query 07:18:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:18:44 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:18:44 Message to Master queued w/err=0: serial=108942 error=0 07:18:49 Received message from Master: op=Filter serial=108943 07:18:49 Color wheel filter change from 0 to 0 07:18:49 FLIGetFilterPos err=0 currentPosition=0 07:18:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:49 Filter is already there-color wheel unchanged 07:18:50 Received message from Master: op=Shutter serial=108944 07:18:50 Shutter LASER close 07:18:50 Received message from Camera: op=State serial=108946 07:18:50 GetSingleValue result=40 Value=cccccccc 07:18:50 SkyScan query 07:18:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:18:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:50 Parameters OK 07:18:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:50 Set A/D data flow result=40 07:18:50 Set A/D channel type result=40 07:18:50 Set A/D encoding result=40 07:18:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:50 Set channel filter=0.000000e+000 result=40 07:18:50 Config A/D Result=40 07:18:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:50 Get A/D filter: -9.255963e+061 result=40 07:18:50 Get A/D value=-858993460 result=40 07:18:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:50 Parameters OK 07:18:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:50 Set A/D data flow result=40 07:18:50 Set A/D channel type result=40 07:18:50 Set A/D encoding result=40 07:18:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:50 Set channel filter=0.000000e+000 result=40 07:18:50 Config A/D Result=40 07:18:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:50 Get A/D filter: -9.255963e+061 result=40 07:18:50 Get A/D value=-858993460 result=40 07:18:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:50 Aux= 07:18:50 Message to Camera, serial 108946 queued 07:19:27 Received message from Master: op=PointingHead serial=108959 07:19:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:19:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:19:27 Point started: ret=0 07:19:27 point_skyscan result=0 07:19:28 Check angles 07:19:28 SkyScan query 07:19:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 07:19:29 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 07:19:29 Check angles 07:19:29 SkyScan query 07:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:19:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:19:30 Message to Master queued w/err=0: serial=108959 error=0 07:19:35 Received message from Master: op=Filter serial=108960 07:19:35 Color wheel filter change from 0 to 0 07:19:35 FLIGetFilterPos err=0 currentPosition=0 07:19:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:35 Filter is already there-color wheel unchanged 07:19:35 Received message from Master: op=Shutter serial=108961 07:19:35 Shutter LASER open 07:19:35 Received message from Camera: op=State serial=108963 07:19:35 GetSingleValue result=40 Value=cccccccc 07:19:35 SkyScan query 07:19:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:19:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:35 Parameters OK 07:19:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:35 Set A/D data flow result=40 07:19:35 Set A/D channel type result=40 07:19:35 Set A/D encoding result=40 07:19:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:35 Set channel filter=0.000000e+000 result=40 07:19:35 Config A/D Result=40 07:19:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:35 Get A/D filter: -9.255963e+061 result=40 07:19:35 Get A/D value=-858993460 result=40 07:19:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:35 Parameters OK 07:19:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:35 Set A/D data flow result=40 07:19:35 Set A/D channel type result=40 07:19:35 Set A/D encoding result=40 07:19:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:35 Set channel filter=0.000000e+000 result=40 07:19:35 Config A/D Result=40 07:19:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:35 Get A/D filter: -9.255963e+061 result=40 07:19:35 Get A/D value=-858993460 result=40 07:19:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:35 Aux= 07:19:35 Message to Camera, serial 108963 queued 07:19:44 Received message from Master: op=Shutter serial=108973 07:19:44 Shutter LASER close 07:19:44 Received message from Master: op=PointingHead serial=108977 07:19:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:19:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:19:45 Point started: ret=0 07:19:45 point_skyscan result=0 07:19:46 Check angles 07:19:46 SkyScan query 07:19:46 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.89<-21526 Statuses=0009 0009 07:19:46 Msec=0 True Az=136.215 Ze=-142.89 Az status=0009 Ze status=0009 07:19:46 Check angles 07:19:46 SkyScan query 07:19:47 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.92<-20128 Statuses=0009 0009 07:19:47 Msec=750 True Az=153.81 Ze=-121.92 Az status=0009 Ze status=0009 07:19:47 Check angles 07:19:47 SkyScan query 07:19:48 SkyScan query done: ret=0 az=171.21<-11414 ze=-100.965<-18731 Statuses=0009 0009 07:19:48 Msec=1500 True Az=171.21 Ze=-100.965 Az status=0009 Ze status=0009 07:19:48 Check angles 07:19:48 SkyScan query 07:19:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.055<-17337 Statuses=0008 0009 07:19:48 Msec=2250 True Az=176.01 Ze=-80.055 Az status=0008 Ze status=0009 07:19:49 Check angles 07:19:49 SkyScan query 07:19:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.605<-15907 Statuses=0008 0009 07:19:49 Msec=3000 True Az=176.01 Ze=-58.605 Az status=0008 Ze status=0009 07:19:49 Check angles 07:19:49 SkyScan query 07:19:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:19:50 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:19:50 Message to Master queued w/err=0: serial=108977 error=0 07:19:55 Received message from Master: op=Filter serial=108978 07:19:55 Color wheel filter change from 0 to 0 07:19:55 FLIGetFilterPos err=0 currentPosition=0 07:19:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:55 Filter is already there-color wheel unchanged 07:19:55 Received message from Master: op=Shutter serial=108979 07:19:55 Shutter LASER close 07:19:55 Received message from Camera: op=State serial=108981 07:19:55 GetSingleValue result=40 Value=cccccccc 07:19:55 SkyScan query 07:19:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:19:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:56 Parameters OK 07:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:56 Set A/D data flow result=40 07:19:56 Set A/D channel type result=40 07:19:56 Set A/D encoding result=40 07:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:56 Set channel filter=0.000000e+000 result=40 07:19:56 Config A/D Result=40 07:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:56 Get A/D filter: -9.255963e+061 result=40 07:19:56 Get A/D value=-858993460 result=40 07:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:56 Parameters OK 07:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:56 Set A/D data flow result=40 07:19:56 Set A/D channel type result=40 07:19:56 Set A/D encoding result=40 07:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:56 Set channel filter=0.000000e+000 result=40 07:19:56 Config A/D Result=40 07:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:56 Get A/D filter: -9.255963e+061 result=40 07:19:56 Get A/D value=-858993460 result=40 07:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:56 Aux= 07:19:56 Message to Camera, serial 108981 queued 07:20:33 Received message from Master: op=PointingHead serial=108994 07:20:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:20:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:20:33 Point started: ret=0 07:20:33 point_skyscan result=0 07:20:34 Check angles 07:20:34 SkyScan query 07:20:34 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.675<-13445 Statuses=0009 0009 07:20:34 Msec=0 True Az=152.91 Ze=-21.675 Az status=0009 Ze status=0009 07:20:35 Check angles 07:20:35 SkyScan query 07:20:35 SkyScan query done: ret=0 az=135.015<-9001 ze=-0.255<-12017 Statuses=0009 0009 07:20:35 Msec=750 True Az=135.015 Ze=-0.255 Az status=0009 Ze status=0009 07:20:35 Check angles 07:20:35 SkyScan query 07:20:36 SkyScan query done: ret=0 az=117.54<-7836 ze=20.685<-10621 Statuses=0009 0009 07:20:36 Msec=1500 True Az=117.54 Ze=20.685 Az status=0009 Ze status=0009 07:20:36 Check angles 07:20:36 SkyScan query 07:20:37 SkyScan query done: ret=0 az=100.14<-6676 ze=41.67<-9222 Statuses=0009 0009 07:20:37 Msec=2250 True Az=100.14 Ze=41.67 Az status=0009 Ze status=0009 07:20:37 Check angles 07:20:37 SkyScan query 07:20:37 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 07:20:37 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 07:20:38 Check angles 07:20:38 SkyScan query 07:20:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:20:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:20:38 Message to Master queued w/err=0: serial=108994 error=0 07:20:43 Received message from Master: op=Filter serial=108995 07:20:43 Color wheel filter change from 0 to 0 07:20:43 FLIGetFilterPos err=0 currentPosition=0 07:20:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:43 Filter is already there-color wheel unchanged 07:20:43 Received message from Master: op=Shutter serial=108996 07:20:43 Shutter LASER close 07:20:43 Received message from Camera: op=State serial=108998 07:20:43 GetSingleValue result=40 Value=cccccccc 07:20:43 SkyScan query 07:20:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:20:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:44 Parameters OK 07:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:44 Set A/D data flow result=40 07:20:44 Set A/D channel type result=40 07:20:44 Set A/D encoding result=40 07:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:44 Set channel filter=0.000000e+000 result=40 07:20:44 Config A/D Result=40 07:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:44 Get A/D filter: -9.255963e+061 result=40 07:20:44 Get A/D value=-858993460 result=40 07:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:44 Parameters OK 07:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:44 Set A/D data flow result=40 07:20:44 Set A/D channel type result=40 07:20:44 Set A/D encoding result=40 07:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:44 Set channel filter=0.000000e+000 result=40 07:20:44 Config A/D Result=40 07:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:44 Get A/D filter: -9.255963e+061 result=40 07:20:44 Get A/D value=-858993460 result=40 07:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:44 Aux= 07:20:44 Message to Camera, serial 108998 queued 07:21:21 Received message from Master: op=PointingHead serial=109011 07:21:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:21:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:21:21 Point started: ret=0 07:21:21 point_skyscan result=0 07:21:22 Check angles 07:21:22 SkyScan query 07:21:22 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 07:21:22 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 07:21:23 Check angles 07:21:23 SkyScan query 07:21:23 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 07:21:23 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 07:21:23 Check angles 07:21:23 SkyScan query 07:21:24 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 07:21:24 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 07:21:24 Check angles 07:21:24 SkyScan query 07:21:25 SkyScan query done: ret=0 az=161.655<-10777 ze=38.505<-9433 Statuses=0009 0008 07:21:25 Msec=2250 True Az=161.655 Ze=38.505 Az status=0009 Ze status=0008 07:21:25 Check angles 07:21:25 SkyScan query 07:21:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:21:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:21:26 Check angles 07:21:26 SkyScan query 07:21:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:21:26 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:21:26 Message to Master queued w/err=0: serial=109011 error=0 07:21:31 Received message from Master: op=Filter serial=109012 07:21:31 Color wheel filter change from 0 to 0 07:21:31 FLIGetFilterPos err=0 currentPosition=0 07:21:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:31 Filter is already there-color wheel unchanged 07:21:31 Received message from Master: op=Shutter serial=109013 07:21:31 Shutter LASER close 07:21:31 Received message from Camera: op=State serial=109015 07:21:31 GetSingleValue result=40 Value=cccccccc 07:21:31 SkyScan query 07:21:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:21:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:32 Parameters OK 07:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:32 Set A/D data flow result=40 07:21:32 Set A/D channel type result=40 07:21:32 Set A/D encoding result=40 07:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:32 Set channel filter=0.000000e+000 result=40 07:21:32 Config A/D Result=40 07:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:32 Get A/D filter: -9.255963e+061 result=40 07:21:32 Get A/D value=-858993460 result=40 07:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:32 Parameters OK 07:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:32 Set A/D data flow result=40 07:21:32 Set A/D channel type result=40 07:21:32 Set A/D encoding result=40 07:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:32 Set channel filter=0.000000e+000 result=40 07:21:32 Config A/D Result=40 07:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:32 Get A/D filter: -9.255963e+061 result=40 07:21:32 Get A/D value=-858993460 result=40 07:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:32 Aux= 07:21:32 Message to Camera, serial 109015 queued 07:22:08 Received message from Master: op=PointingHead serial=109027 07:22:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:22:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:22:08 Point started: ret=0 07:22:08 point_skyscan result=0 07:22:09 Check angles 07:22:09 SkyScan query 07:22:10 SkyScan query done: ret=0 az=153.105<-10207 ze=8.805<-11413 Statuses=0009 0009 07:22:10 Msec=0 True Az=153.105 Ze=8.805 Az status=0009 Ze status=0009 07:22:10 Check angles 07:22:10 SkyScan query 07:22:10 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.15<-12810 Statuses=0009 0009 07:22:10 Msec=750 True Az=135.72 Ze=-12.15 Az status=0009 Ze status=0009 07:22:11 Check angles 07:22:11 SkyScan query 07:22:11 SkyScan query done: ret=0 az=118.125<-7875 ze=-33.06<-14204 Statuses=0009 0009 07:22:11 Msec=1500 True Az=118.125 Ze=-33.06 Az status=0009 Ze status=0009 07:22:11 Check angles 07:22:11 SkyScan query 07:22:12 SkyScan query done: ret=0 az=100.74<-6716 ze=-51.525<-15435 Statuses=0009 0009 07:22:12 Msec=2250 True Az=100.74 Ze=-51.525 Az status=0009 Ze status=0009 07:22:12 Check angles 07:22:12 SkyScan query 07:22:13 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:22:13 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:22:13 Check angles 07:22:13 SkyScan query 07:22:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:22:13 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:22:13 Message to Master queued w/err=0: serial=109027 error=0 07:22:18 Received message from Master: op=Filter serial=109028 07:22:18 Color wheel filter change from 0 to 0 07:22:18 FLIGetFilterPos err=0 currentPosition=0 07:22:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:18 Filter is already there-color wheel unchanged 07:22:19 Received message from Master: op=Shutter serial=109029 07:22:19 Shutter LASER close 07:22:19 Received message from Camera: op=State serial=109031 07:22:19 GetSingleValue result=40 Value=cccccccc 07:22:19 SkyScan query 07:22:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:22:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:19 Parameters OK 07:22:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:19 Set A/D data flow result=40 07:22:19 Set A/D channel type result=40 07:22:19 Set A/D encoding result=40 07:22:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:19 Set channel filter=0.000000e+000 result=40 07:22:19 Config A/D Result=40 07:22:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:19 Get A/D filter: -9.255963e+061 result=40 07:22:19 Get A/D value=-858993460 result=40 07:22:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:19 Parameters OK 07:22:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:19 Set A/D data flow result=40 07:22:19 Set A/D channel type result=40 07:22:19 Set A/D encoding result=40 07:22:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:19 Set channel filter=0.000000e+000 result=40 07:22:19 Config A/D Result=40 07:22:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:19 Get A/D filter: -9.255963e+061 result=40 07:22:19 Get A/D value=-858993460 result=40 07:22:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:19 Aux= 07:22:19 Message to Camera, serial 109031 queued 07:22:55 Received message from Master: op=PointingHead serial=109043 07:22:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:22:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:22:55 Point started: ret=0 07:22:55 point_skyscan result=0 07:22:56 Check angles 07:22:56 SkyScan query 07:22:57 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.15<-17410 Statuses=0009 0009 07:22:57 Msec=0 True Az=108.885 Ze=-81.15 Az status=0009 Ze status=0009 07:22:57 Check angles 07:22:57 SkyScan query 07:22:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 07:22:57 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 07:22:58 Check angles 07:22:58 SkyScan query 07:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 07:22:58 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 07:22:58 Check angles 07:22:58 SkyScan query 07:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.48<-21632 Statuses=0008 0009 07:22:59 Msec=2250 True Az=112.995 Ze=-144.48 Az status=0008 Ze status=0009 07:22:59 Check angles 07:22:59 SkyScan query 07:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.42<-23028 Statuses=0008 0009 07:23:00 Msec=3000 True Az=112.995 Ze=-165.42 Az status=0008 Ze status=0009 07:23:00 Check angles 07:23:00 SkyScan query 07:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:23:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:23:00 Message to Master queued w/err=0: serial=109043 error=0 07:23:05 Received message from Master: op=Filter serial=109044 07:23:05 Color wheel filter change from 0 to 0 07:23:05 FLIGetFilterPos err=0 currentPosition=0 07:23:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:05 Filter is already there-color wheel unchanged 07:23:06 Received message from Master: op=Shutter serial=109045 07:23:06 Shutter LASER open 07:23:06 Received message from Camera: op=State serial=109047 07:23:06 GetSingleValue result=40 Value=cccccccc 07:23:06 SkyScan query 07:23:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:23:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:06 Parameters OK 07:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:06 Set A/D data flow result=40 07:23:06 Set A/D channel type result=40 07:23:06 Set A/D encoding result=40 07:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:06 Set channel filter=0.000000e+000 result=40 07:23:06 Config A/D Result=40 07:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:06 Get A/D filter: -9.255963e+061 result=40 07:23:06 Get A/D value=-858993460 result=40 07:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:06 Parameters OK 07:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:06 Set A/D data flow result=40 07:23:06 Set A/D channel type result=40 07:23:06 Set A/D encoding result=40 07:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:06 Set channel filter=0.000000e+000 result=40 07:23:06 Config A/D Result=40 07:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:06 Get A/D filter: -9.255963e+061 result=40 07:23:06 Get A/D value=-858993460 result=40 07:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:06 Aux= 07:23:06 Message to Camera, serial 109047 queued 07:23:15 Received message from Master: op=Shutter serial=109057 07:23:15 Shutter LASER close 07:23:15 Received message from Master: op=PointingHead serial=109061 07:23:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:23:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:23:16 Point started: ret=0 07:23:16 point_skyscan result=0 07:23:16 Check angles 07:23:16 SkyScan query 07:23:17 SkyScan query done: ret=0 az=89.55<-5970 ze=156.75<-1550 Statuses=0009 0009 07:23:17 Msec=0 True Az=89.55 Ze=156.75 Az status=0009 Ze status=0009 07:23:17 Check angles 07:23:17 SkyScan query 07:23:18 SkyScan query done: ret=0 az=72.015<-4801 ze=135.795<-2947 Statuses=0009 0009 07:23:18 Msec=750 True Az=72.015 Ze=135.795 Az status=0009 Ze status=0009 07:23:18 Check angles 07:23:18 SkyScan query 07:23:18 SkyScan query done: ret=0 az=54.435<-3629 ze=114.36<-4376 Statuses=0009 0009 07:23:18 Msec=1500 True Az=54.435 Ze=114.36 Az status=0009 Ze status=0009 07:23:19 Check angles 07:23:19 SkyScan query 07:23:19 SkyScan query done: ret=0 az=40.95<-2730 ze=93.465<-5769 Statuses=0009 0009 07:23:19 Msec=2250 True Az=40.95 Ze=93.465 Az status=0009 Ze status=0009 07:23:19 Check angles 07:23:19 SkyScan query 07:23:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.465<-7169 Statuses=0008 0009 07:23:20 Msec=3000 True Az=40.995 Ze=72.465 Az status=0008 Ze status=0009 07:23:20 Check angles 07:23:20 SkyScan query 07:23:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 07:23:21 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 07:23:21 Check angles 07:23:21 SkyScan query 07:23:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:23:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:23:21 Message to Master queued w/err=0: serial=109061 error=0 07:23:26 Received message from Master: op=Filter serial=109062 07:23:26 Color wheel filter change from 0 to 0 07:23:26 FLIGetFilterPos err=0 currentPosition=0 07:23:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:26 Filter is already there-color wheel unchanged 07:23:27 Received message from Master: op=Shutter serial=109063 07:23:27 Shutter LASER close 07:23:27 Received message from Camera: op=State serial=109065 07:23:27 GetSingleValue result=40 Value=cccccccc 07:23:27 SkyScan query 07:23:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:23:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:27 Parameters OK 07:23:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:27 Set A/D data flow result=40 07:23:27 Set A/D channel type result=40 07:23:27 Set A/D encoding result=40 07:23:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:27 Set channel filter=0.000000e+000 result=40 07:23:27 Config A/D Result=40 07:23:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:27 Get A/D filter: -9.255963e+061 result=40 07:23:27 Get A/D value=-858993460 result=40 07:23:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:27 Parameters OK 07:23:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:27 Set A/D data flow result=40 07:23:27 Set A/D channel type result=40 07:23:27 Set A/D encoding result=40 07:23:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:27 Set channel filter=0.000000e+000 result=40 07:23:27 Config A/D Result=40 07:23:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:27 Get A/D filter: -9.255963e+061 result=40 07:23:27 Get A/D value=-858993460 result=40 07:23:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:27 Aux= 07:23:27 Message to Camera, serial 109065 queued 07:24:04 Received message from Master: op=PointingHead serial=109078 07:24:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:24:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:24:05 Point started: ret=0 07:24:05 point_skyscan result=0 07:24:05 Check angles 07:24:05 SkyScan query 07:24:06 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 07:24:06 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 07:24:06 Check angles 07:24:06 SkyScan query 07:24:07 SkyScan query done: ret=0 az=81.3<-5420 ze=66.495<-7567 Statuses=0009 0008 07:24:07 Msec=750 True Az=81.3 Ze=66.495 Az status=0009 Ze status=0008 07:24:07 Check angles 07:24:07 SkyScan query 07:24:07 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 07:24:07 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 07:24:08 Check angles 07:24:08 SkyScan query 07:24:08 SkyScan query done: ret=0 az=116.25<-7750 ze=66.495<-7567 Statuses=0009 0008 07:24:08 Msec=2250 True Az=116.25 Ze=66.495 Az status=0009 Ze status=0008 07:24:08 Check angles 07:24:08 SkyScan query 07:24:09 SkyScan query done: ret=0 az=133.935<-8929 ze=66.495<-7567 Statuses=0009 0008 07:24:09 Msec=3000 True Az=133.935 Ze=66.495 Az status=0009 Ze status=0008 07:24:09 Check angles 07:24:09 SkyScan query 07:24:10 SkyScan query done: ret=0 az=151.245<-10083 ze=66.495<-7567 Statuses=0009 0008 07:24:10 Msec=3750 True Az=151.245 Ze=66.495 Az status=0009 Ze status=0008 07:24:10 Check angles 07:24:10 SkyScan query 07:24:10 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 07:24:10 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 07:24:10 Message to Master queued w/err=0: serial=109078 error=0 07:24:15 Received message from Master: op=Filter serial=109079 07:24:15 Color wheel filter change from 0 to 0 07:24:15 FLIGetFilterPos err=0 currentPosition=0 07:24:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:15 Filter is already there-color wheel unchanged 07:24:16 Received message from Master: op=Shutter serial=109080 07:24:16 Shutter LASER close 07:24:16 Received message from Camera: op=State serial=109082 07:24:16 GetSingleValue result=40 Value=cccccccc 07:24:16 SkyScan query 07:24:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:24:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:16 Parameters OK 07:24:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:16 Set A/D data flow result=40 07:24:16 Set A/D channel type result=40 07:24:16 Set A/D encoding result=40 07:24:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:16 Set channel filter=0.000000e+000 result=40 07:24:16 Config A/D Result=40 07:24:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:16 Get A/D filter: -9.255963e+061 result=40 07:24:16 Get A/D value=-858993460 result=40 07:24:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:16 Parameters OK 07:24:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:16 Set A/D data flow result=40 07:24:16 Set A/D channel type result=40 07:24:16 Set A/D encoding result=40 07:24:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:16 Set channel filter=0.000000e+000 result=40 07:24:16 Config A/D Result=40 07:24:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:16 Get A/D filter: -9.255963e+061 result=40 07:24:16 Get A/D value=-858993460 result=40 07:24:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:16 Aux= 07:24:16 Message to Camera, serial 109082 queued 07:24:53 Received message from Master: op=PointingHead serial=109095 07:24:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:24:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:24:53 Point started: ret=0 07:24:53 point_skyscan result=0 07:24:54 Check angles 07:24:54 SkyScan query 07:24:55 SkyScan query done: ret=0 az=134.895<-8993 ze=36.6<-9560 Statuses=0009 0009 07:24:55 Msec=0 True Az=134.895 Ze=36.6 Az status=0009 Ze status=0009 07:24:55 Check angles 07:24:55 SkyScan query 07:24:55 SkyScan query done: ret=0 az=117.42<-7828 ze=15.72<-10952 Statuses=0009 0009 07:24:55 Msec=750 True Az=117.42 Ze=15.72 Az status=0009 Ze status=0009 07:24:56 Check angles 07:24:56 SkyScan query 07:24:56 SkyScan query done: ret=0 az=100.065<-6671 ze=-5.295<-12353 Statuses=0009 0009 07:24:56 Msec=1500 True Az=100.065 Ze=-5.295 Az status=0009 Ze status=0009 07:24:56 Check angles 07:24:56 SkyScan query 07:24:57 SkyScan query done: ret=0 az=82.545<-5503 ze=-26.22<-13748 Statuses=0009 0009 07:24:57 Msec=2250 True Az=82.545 Ze=-26.22 Az status=0009 Ze status=0009 07:24:57 Check angles 07:24:57 SkyScan query 07:24:58 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.565<-14571 Statuses=0009 0008 07:24:58 Msec=3000 True Az=64.695 Ze=-38.565 Az status=0009 Ze status=0008 07:24:58 Check angles 07:24:58 SkyScan query 07:24:58 SkyScan query done: ret=0 az=47.28<-3152 ze=-38.535<-14569 Statuses=0009 0008 07:24:58 Msec=3750 True Az=47.28 Ze=-38.535 Az status=0009 Ze status=0008 07:24:59 Check angles 07:24:59 SkyScan query 07:24:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:24:59 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:24:59 Message to Master queued w/err=0: serial=109095 error=0 07:25:04 Received message from Master: op=Filter serial=109096 07:25:04 Color wheel filter change from 0 to 0 07:25:04 FLIGetFilterPos err=0 currentPosition=0 07:25:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:04 Filter is already there-color wheel unchanged 07:25:04 Received message from Master: op=Shutter serial=109097 07:25:04 Shutter LASER close 07:25:04 Received message from Camera: op=State serial=109099 07:25:04 GetSingleValue result=40 Value=cccccccc 07:25:04 SkyScan query 07:25:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:25:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:05 Parameters OK 07:25:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:05 Set A/D data flow result=40 07:25:05 Set A/D channel type result=40 07:25:05 Set A/D encoding result=40 07:25:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:05 Set channel filter=0.000000e+000 result=40 07:25:05 Config A/D Result=40 07:25:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:05 Get A/D filter: -9.255963e+061 result=40 07:25:05 Get A/D value=-858993460 result=40 07:25:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:05 Parameters OK 07:25:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:05 Set A/D data flow result=40 07:25:05 Set A/D channel type result=40 07:25:05 Set A/D encoding result=40 07:25:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:05 Set channel filter=0.000000e+000 result=40 07:25:05 Config A/D Result=40 07:25:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:05 Get A/D filter: -9.255963e+061 result=40 07:25:05 Get A/D value=-858993460 result=40 07:25:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-13 07:25:05] 07:25:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:05 Aux= 07:25:05 Message to Camera, serial 109099 queued 07:25:42 Received message from Master: op=PointingHead serial=109112 07:25:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:25:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:25:42 Point started: ret=0 07:25:42 point_skyscan result=0 07:25:43 Check angles 07:25:43 SkyScan query 07:25:43 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.025<-16535 Statuses=0009 0009 07:25:43 Msec=0 True Az=63.78 Ze=-68.025 Az status=0009 Ze status=0009 07:25:44 Check angles 07:25:44 SkyScan query 07:25:44 SkyScan query done: ret=0 az=81.12<-5408 ze=-89.01<-17934 Statuses=0009 0009 07:25:44 Msec=750 True Az=81.12 Ze=-89.01 Az status=0009 Ze status=0009 07:25:44 Check angles 07:25:44 SkyScan query 07:25:45 SkyScan query done: ret=0 az=98.595<-6573 ze=-109.965<-19331 Statuses=0009 0009 07:25:45 Msec=1500 True Az=98.595 Ze=-109.965 Az status=0009 Ze status=0009 07:25:45 Check angles 07:25:45 SkyScan query 07:25:46 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.37<-20758 Statuses=0009 0009 07:25:46 Msec=2250 True Az=116.67 Ze=-131.37 Az status=0009 Ze status=0009 07:25:46 Check angles 07:25:46 SkyScan query 07:25:46 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 07:25:46 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 07:25:47 Check angles 07:25:47 SkyScan query 07:25:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:25:47 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:25:47 Message to Master queued w/err=0: serial=109112 error=0 07:25:52 Received message from Master: op=Filter serial=109113 07:25:52 Color wheel filter change from 0 to 0 07:25:52 FLIGetFilterPos err=0 currentPosition=0 07:25:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:52 Filter is already there-color wheel unchanged 07:25:52 Received message from Master: op=Shutter serial=109114 07:25:52 Shutter LASER close 07:25:52 Received message from Camera: op=State serial=109116 07:25:52 GetSingleValue result=40 Value=cccccccc 07:25:52 SkyScan query 07:25:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:25:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:53 Parameters OK 07:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:53 Set A/D data flow result=40 07:25:53 Set A/D channel type result=40 07:25:53 Set A/D encoding result=40 07:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:53 Set channel filter=0.000000e+000 result=40 07:25:53 Config A/D Result=40 07:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:53 Get A/D filter: -9.255963e+061 result=40 07:25:53 Get A/D value=-858993460 result=40 07:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:53 Parameters OK 07:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:53 Set A/D data flow result=40 07:25:53 Set A/D channel type result=40 07:25:53 Set A/D encoding result=40 07:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:53 Set channel filter=0.000000e+000 result=40 07:25:53 Config A/D Result=40 07:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:53 Get A/D filter: -9.255963e+061 result=40 07:25:53 Get A/D value=-858993460 result=40 07:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:53 Aux= 07:25:53 Message to Camera, serial 109116 queued 07:26:30 Received message from Master: op=PointingHead serial=109129 07:26:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:26:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:26:30 Point started: ret=0 07:26:30 point_skyscan result=0 07:26:31 Check angles 07:26:31 SkyScan query 07:26:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 07:26:32 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 07:26:32 Check angles 07:26:32 SkyScan query 07:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:26:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:26:32 Message to Master queued w/err=0: serial=109129 error=0 07:26:37 Received message from Master: op=Filter serial=109130 07:26:37 Color wheel filter change from 0 to 0 07:26:37 FLIGetFilterPos err=0 currentPosition=0 07:26:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:37 Filter is already there-color wheel unchanged 07:26:37 Received message from Master: op=Shutter serial=109131 07:26:37 Shutter LASER open 07:26:38 Received message from Camera: op=State serial=109133 07:26:38 GetSingleValue result=40 Value=cccccccc 07:26:38 SkyScan query 07:26:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:26:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:38 Parameters OK 07:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:38 Set A/D data flow result=40 07:26:38 Set A/D channel type result=40 07:26:38 Set A/D encoding result=40 07:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:38 Set channel filter=0.000000e+000 result=40 07:26:38 Config A/D Result=40 07:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:38 Get A/D filter: -9.255963e+061 result=40 07:26:38 Get A/D value=-858993460 result=40 07:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:38 Parameters OK 07:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:38 Set A/D data flow result=40 07:26:38 Set A/D channel type result=40 07:26:38 Set A/D encoding result=40 07:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:38 Set channel filter=0.000000e+000 result=40 07:26:38 Config A/D Result=40 07:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:38 Get A/D filter: -9.255963e+061 result=40 07:26:38 Get A/D value=-858993460 result=40 07:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:38 Aux= 07:26:38 Message to Camera, serial 109133 queued 07:26:47 Received message from Master: op=Shutter serial=109143 07:26:47 Shutter LASER close 07:26:47 Received message from Master: op=PointingHead serial=109147 07:26:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:26:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:26:48 Point started: ret=0 07:26:48 point_skyscan result=0 07:26:48 Check angles 07:26:48 SkyScan query 07:26:49 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.235<-21549 Statuses=0009 0009 07:26:49 Msec=0 True Az=135.96 Ze=-143.235 Az status=0009 Ze status=0009 07:26:49 Check angles 07:26:49 SkyScan query 07:26:50 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.25<-20150 Statuses=0009 0009 07:26:50 Msec=750 True Az=153.36 Ze=-122.25 Az status=0009 Ze status=0009 07:26:50 Check angles 07:26:50 SkyScan query 07:26:51 SkyScan query done: ret=0 az=170.865<-11391 ze=-101.385<-18759 Statuses=0009 0009 07:26:51 Msec=1500 True Az=170.865 Ze=-101.385 Az status=0009 Ze status=0009 07:26:51 Check angles 07:26:51 SkyScan query 07:26:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.37<-17358 Statuses=0008 0009 07:26:51 Msec=2250 True Az=176.01 Ze=-80.37 Az status=0008 Ze status=0009 07:26:51 Check angles 07:26:51 SkyScan query 07:26:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.415<-15961 Statuses=0008 0009 07:26:52 Msec=3000 True Az=176.01 Ze=-59.415 Az status=0008 Ze status=0009 07:26:52 Check angles 07:26:52 SkyScan query 07:26:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:26:53 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:26:53 Message to Master queued w/err=0: serial=109147 error=0 07:26:58 Received message from Master: op=Filter serial=109148 07:26:58 Color wheel filter change from 0 to 0 07:26:58 FLIGetFilterPos err=0 currentPosition=0 07:26:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:58 Filter is already there-color wheel unchanged 07:26:58 Received message from Master: op=Shutter serial=109149 07:26:58 Shutter LASER close 07:26:58 Received message from Camera: op=State serial=109151 07:26:58 GetSingleValue result=40 Value=cccccccc 07:26:58 SkyScan query 07:26:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:59 Parameters OK 07:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:59 Set A/D data flow result=40 07:26:59 Set A/D channel type result=40 07:26:59 Set A/D encoding result=40 07:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:59 Set channel filter=0.000000e+000 result=40 07:26:59 Config A/D Result=40 07:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:59 Get A/D filter: -9.255963e+061 result=40 07:26:59 Get A/D value=-858993460 result=40 07:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:59 Parameters OK 07:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:59 Set A/D data flow result=40 07:26:59 Set A/D channel type result=40 07:26:59 Set A/D encoding result=40 07:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:59 Set channel filter=0.000000e+000 result=40 07:26:59 Config A/D Result=40 07:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:59 Get A/D filter: -9.255963e+061 result=40 07:26:59 Get A/D value=-858993460 result=40 07:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:59 Aux= 07:26:59 Message to Camera, serial 109151 queued 07:27:35 Received message from Master: op=PointingHead serial=109164 07:27:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:27:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:27:36 Point started: ret=0 07:27:36 point_skyscan result=0 07:27:37 Check angles 07:27:37 SkyScan query 07:27:37 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.9<-13460 Statuses=0009 0009 07:27:37 Msec=0 True Az=153.105 Ze=-21.9 Az status=0009 Ze status=0009 07:27:37 Check angles 07:27:37 SkyScan query 07:27:38 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.45<-12030 Statuses=0009 0009 07:27:38 Msec=750 True Az=135.135 Ze=-0.45 Az status=0009 Ze status=0009 07:27:38 Check angles 07:27:38 SkyScan query 07:27:39 SkyScan query done: ret=0 az=117.765<-7851 ze=20.49<-10634 Statuses=0009 0009 07:27:39 Msec=1500 True Az=117.765 Ze=20.49 Az status=0009 Ze status=0009 07:27:39 Check angles 07:27:39 SkyScan query 07:27:39 SkyScan query done: ret=0 az=100.38<-6692 ze=41.475<-9235 Statuses=0009 0009 07:27:39 Msec=2250 True Az=100.38 Ze=41.475 Az status=0009 Ze status=0009 07:27:40 Check angles 07:27:40 SkyScan query 07:27:40 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 07:27:40 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 07:27:40 Check angles 07:27:40 SkyScan query 07:27:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:27:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:27:41 Message to Master queued w/err=0: serial=109164 error=0 07:27:46 Received message from Master: op=Filter serial=109165 07:27:46 Color wheel filter change from 0 to 0 07:27:46 FLIGetFilterPos err=0 currentPosition=0 07:27:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:46 Filter is already there-color wheel unchanged 07:27:46 Received message from Master: op=Shutter serial=109166 07:27:46 Shutter LASER close 07:27:46 Received message from Camera: op=State serial=109168 07:27:46 GetSingleValue result=40 Value=cccccccc 07:27:46 SkyScan query 07:27:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:27:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:47 Parameters OK 07:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:47 Set A/D data flow result=40 07:27:47 Set A/D channel type result=40 07:27:47 Set A/D encoding result=40 07:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:47 Set channel filter=0.000000e+000 result=40 07:27:47 Config A/D Result=40 07:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:47 Get A/D filter: -9.255963e+061 result=40 07:27:47 Get A/D value=-858993460 result=40 07:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:47 Parameters OK 07:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:47 Set A/D data flow result=40 07:27:47 Set A/D channel type result=40 07:27:47 Set A/D encoding result=40 07:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:47 Set channel filter=0.000000e+000 result=40 07:27:47 Config A/D Result=40 07:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:47 Get A/D filter: -9.255963e+061 result=40 07:27:47 Get A/D value=-858993460 result=40 07:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:47 Aux= 07:27:47 Message to Camera, serial 109168 queued 07:28:24 Received message from Master: op=PointingHead serial=109181 07:28:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:28:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:28:24 Point started: ret=0 07:28:24 point_skyscan result=0 07:28:25 Check angles 07:28:25 SkyScan query 07:28:25 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 07:28:25 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 07:28:25 Check angles 07:28:25 SkyScan query 07:28:26 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 07:28:26 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 07:28:26 Check angles 07:28:26 SkyScan query 07:28:27 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 07:28:27 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 07:28:27 Check angles 07:28:27 SkyScan query 07:28:27 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 07:28:27 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 07:28:28 Check angles 07:28:28 SkyScan query 07:28:28 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:28:28 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:28:28 Check angles 07:28:28 SkyScan query 07:28:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:28:29 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:28:29 Message to Master queued w/err=0: serial=109181 error=0 07:28:34 Received message from Master: op=Filter serial=109182 07:28:34 Color wheel filter change from 0 to 0 07:28:34 FLIGetFilterPos err=0 currentPosition=0 07:28:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:34 Filter is already there-color wheel unchanged 07:28:34 Received message from Master: op=Shutter serial=109183 07:28:34 Shutter LASER close 07:28:34 Received message from Camera: op=State serial=109185 07:28:34 GetSingleValue result=40 Value=cccccccc 07:28:34 SkyScan query 07:28:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:28:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:35 Parameters OK 07:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:35 Set A/D data flow result=40 07:28:35 Set A/D channel type result=40 07:28:35 Set A/D encoding result=40 07:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:35 Set channel filter=0.000000e+000 result=40 07:28:35 Config A/D Result=40 07:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:35 Get A/D filter: -9.255963e+061 result=40 07:28:35 Get A/D value=-858993460 result=40 07:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:35 Parameters OK 07:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:35 Set A/D data flow result=40 07:28:35 Set A/D channel type result=40 07:28:35 Set A/D encoding result=40 07:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:35 Set channel filter=0.000000e+000 result=40 07:28:35 Config A/D Result=40 07:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:35 Get A/D filter: -9.255963e+061 result=40 07:28:35 Get A/D value=-858993460 result=40 07:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:35 Aux= 07:28:35 Message to Camera, serial 109185 queued 07:29:12 Received message from Master: op=PointingHead serial=109198 07:29:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:29:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:29:12 Point started: ret=0 07:29:12 point_skyscan result=0 07:29:13 Check angles 07:29:13 SkyScan query 07:29:13 SkyScan query done: ret=0 az=152.7<-10180 ze=8.265<-11449 Statuses=0009 0009 07:29:13 Msec=0 True Az=152.7 Ze=8.265 Az status=0009 Ze status=0009 07:29:13 Check angles 07:29:13 SkyScan query 07:29:14 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.645<-12843 Statuses=0009 0009 07:29:14 Msec=750 True Az=135.165 Ze=-12.645 Az status=0009 Ze status=0009 07:29:14 Check angles 07:29:14 SkyScan query 07:29:15 SkyScan query done: ret=0 az=117.69<-7846 ze=-33.63<-14242 Statuses=0009 0009 07:29:15 Msec=1500 True Az=117.69 Ze=-33.63 Az status=0009 Ze status=0009 07:29:15 Check angles 07:29:15 SkyScan query 07:29:16 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.555<-15437 Statuses=0009 0009 07:29:16 Msec=2250 True Az=100.2 Ze=-51.555 Az status=0009 Ze status=0009 07:29:16 Check angles 07:29:16 SkyScan query 07:29:16 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:29:16 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:29:16 Check angles 07:29:16 SkyScan query 07:29:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:29:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:29:17 Message to Master queued w/err=0: serial=109198 error=0 07:29:22 Received message from Master: op=Filter serial=109199 07:29:22 Color wheel filter change from 0 to 0 07:29:22 FLIGetFilterPos err=0 currentPosition=0 07:29:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:22 Filter is already there-color wheel unchanged 07:29:22 Received message from Master: op=Shutter serial=109200 07:29:22 Shutter LASER close 07:29:22 Received message from Camera: op=State serial=109202 07:29:22 GetSingleValue result=40 Value=cccccccc 07:29:22 SkyScan query 07:29:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:29:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:23 Parameters OK 07:29:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:23 Set A/D data flow result=40 07:29:23 Set A/D channel type result=40 07:29:23 Set A/D encoding result=40 07:29:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:23 Set channel filter=0.000000e+000 result=40 07:29:23 Config A/D Result=40 07:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:23 Get A/D filter: -9.255963e+061 result=40 07:29:23 Get A/D value=-858993460 result=40 07:29:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:23 Parameters OK 07:29:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:23 Set A/D data flow result=40 07:29:23 Set A/D channel type result=40 07:29:23 Set A/D encoding result=40 07:29:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:23 Set channel filter=0.000000e+000 result=40 07:29:23 Config A/D Result=40 07:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:23 Get A/D filter: -9.255963e+061 result=40 07:29:23 Get A/D value=-858993460 result=40 07:29:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:23 Aux= 07:29:23 Message to Camera, serial 109202 queued 07:30:00 Received message from Master: op=PointingHead serial=109215 07:30:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:30:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:30:00 Point started: ret=0 07:30:00 point_skyscan result=0 07:30:01 Check angles 07:30:01 SkyScan query 07:30:01 SkyScan query done: ret=0 az=108.81<-7254 ze=-81<-17400 Statuses=0009 0009 07:30:01 Msec=0 True Az=108.81 Ze=-81 Az status=0009 Ze status=0009 07:30:02 Check angles 07:30:02 SkyScan query 07:30:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 07:30:02 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 07:30:02 Check angles 07:30:02 SkyScan query 07:30:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 07:30:03 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 07:30:03 Check angles 07:30:03 SkyScan query 07:30:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 07:30:04 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 07:30:04 Check angles 07:30:04 SkyScan query 07:30:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.255<-23017 Statuses=0008 0009 07:30:04 Msec=3000 True Az=112.995 Ze=-165.255 Az status=0008 Ze status=0009 07:30:05 Check angles 07:30:05 SkyScan query 07:30:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:30:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:30:05 Message to Master queued w/err=0: serial=109215 error=0 07:30:10 Received message from Master: op=Filter serial=109216 07:30:10 Color wheel filter change from 0 to 0 07:30:10 FLIGetFilterPos err=0 currentPosition=0 07:30:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:10 Filter is already there-color wheel unchanged 07:30:10 Received message from Master: op=Shutter serial=109217 07:30:10 Shutter LASER open 07:30:10 Received message from Camera: op=State serial=109219 07:30:10 GetSingleValue result=40 Value=cccccccc 07:30:10 SkyScan query 07:30:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:30:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:11 Parameters OK 07:30:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:11 Set A/D data flow result=40 07:30:11 Set A/D channel type result=40 07:30:11 Set A/D encoding result=40 07:30:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:11 Set channel filter=0.000000e+000 result=40 07:30:11 Config A/D Result=40 07:30:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:11 Get A/D filter: -9.255963e+061 result=40 07:30:11 Get A/D value=-858993460 result=40 07:30:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:11 Parameters OK 07:30:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:11 Set A/D data flow result=40 07:30:11 Set A/D channel type result=40 07:30:11 Set A/D encoding result=40 07:30:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:11 Set channel filter=0.000000e+000 result=40 07:30:11 Config A/D Result=40 07:30:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:11 Get A/D filter: -9.255963e+061 result=40 07:30:11 Get A/D value=-858993460 result=40 07:30:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:11 Aux= 07:30:11 Message to Camera, serial 109219 queued 07:30:19 Received message from Master: op=Shutter serial=109229 07:30:20 Shutter LASER close 07:30:20 Received message from Master: op=PointingHead serial=109233 07:30:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:30:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:30:20 Point started: ret=0 07:30:20 point_skyscan result=0 07:30:21 Check angles 07:30:21 SkyScan query 07:30:22 SkyScan query done: ret=0 az=89.88<-5992 ze=157.275<-1515 Statuses=0009 0009 07:30:22 Msec=0 True Az=89.88 Ze=157.275 Az status=0009 Ze status=0009 07:30:22 Check angles 07:30:22 SkyScan query 07:30:22 SkyScan query done: ret=0 az=72.495<-4833 ze=136.365<-2909 Statuses=0009 0009 07:30:22 Msec=750 True Az=72.495 Ze=136.365 Az status=0009 Ze status=0009 07:30:23 Check angles 07:30:23 SkyScan query 07:30:23 SkyScan query done: ret=0 az=55.08<-3672 ze=115.47<-4302 Statuses=0009 0009 07:30:23 Msec=1500 True Az=55.08 Ze=115.47 Az status=0009 Ze status=0009 07:30:23 Check angles 07:30:23 SkyScan query 07:30:24 SkyScan query done: ret=0 az=40.905<-2727 ze=94.005<-5733 Statuses=0009 0009 07:30:24 Msec=2250 True Az=40.905 Ze=94.005 Az status=0009 Ze status=0009 07:30:24 Check angles 07:30:24 SkyScan query 07:30:25 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 07:30:25 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 07:30:25 Check angles 07:30:25 SkyScan query 07:30:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 07:30:25 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 07:30:26 Check angles 07:30:26 SkyScan query 07:30:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:30:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:30:26 Message to Master queued w/err=0: serial=109233 error=0 07:30:31 Received message from Master: op=Filter serial=109234 07:30:31 Color wheel filter change from 0 to 0 07:30:31 FLIGetFilterPos err=0 currentPosition=0 07:30:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:31 Filter is already there-color wheel unchanged 07:30:31 Received message from Master: op=Shutter serial=109235 07:30:31 Shutter LASER close 07:30:31 Received message from Camera: op=State serial=109237 07:30:31 GetSingleValue result=40 Value=cccccccc 07:30:31 SkyScan query 07:30:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:30:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:32 Parameters OK 07:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:32 Set A/D data flow result=40 07:30:32 Set A/D channel type result=40 07:30:32 Set A/D encoding result=40 07:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:32 Set channel filter=0.000000e+000 result=40 07:30:32 Config A/D Result=40 07:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:32 Get A/D filter: -9.255963e+061 result=40 07:30:32 Get A/D value=-858993460 result=40 07:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:32 Parameters OK 07:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:32 Set A/D data flow result=40 07:30:32 Set A/D channel type result=40 07:30:32 Set A/D encoding result=40 07:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:32 Set channel filter=0.000000e+000 result=40 07:30:32 Config A/D Result=40 07:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:32 Get A/D filter: -9.255963e+061 result=40 07:30:32 Get A/D value=-858993460 result=40 07:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:32 Aux= 07:30:32 Message to Camera, serial 109237 queued 07:31:09 Received message from Master: op=PointingHead serial=109250 07:31:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:31:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:31:09 Point started: ret=0 07:31:09 point_skyscan result=0 07:31:10 Check angles 07:31:10 SkyScan query 07:31:11 SkyScan query done: ret=0 az=64.545<-4303 ze=66.555<-7563 Statuses=0009 0008 07:31:11 Msec=0 True Az=64.545 Ze=66.555 Az status=0009 Ze status=0008 07:31:11 Check angles 07:31:11 SkyScan query 07:31:11 SkyScan query done: ret=0 az=81.87<-5458 ze=66.51<-7566 Statuses=0009 0008 07:31:11 Msec=750 True Az=81.87 Ze=66.51 Az status=0009 Ze status=0008 07:31:11 Check angles 07:31:11 SkyScan query 07:31:12 SkyScan query done: ret=0 az=99.465<-6631 ze=66.495<-7567 Statuses=0009 0008 07:31:12 Msec=1500 True Az=99.465 Ze=66.495 Az status=0009 Ze status=0008 07:31:12 Check angles 07:31:12 SkyScan query 07:31:13 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 07:31:13 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 07:31:13 Check angles 07:31:13 SkyScan query 07:31:14 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 07:31:14 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 07:31:14 Check angles 07:31:14 SkyScan query 07:31:14 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 07:31:14 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 07:31:14 Check angles 07:31:14 SkyScan query 07:31:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:31:15 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:31:15 Message to Master queued w/err=0: serial=109250 error=0 07:31:20 Received message from Master: op=Filter serial=109251 07:31:20 Color wheel filter change from 0 to 0 07:31:20 FLIGetFilterPos err=0 currentPosition=0 07:31:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:20 Filter is already there-color wheel unchanged 07:31:20 Received message from Master: op=Shutter serial=109252 07:31:20 Shutter LASER close 07:31:20 Received message from Camera: op=State serial=109254 07:31:20 GetSingleValue result=40 Value=cccccccc 07:31:20 SkyScan query 07:31:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:31:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:21 Parameters OK 07:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:21 Set A/D data flow result=40 07:31:21 Set A/D channel type result=40 07:31:21 Set A/D encoding result=40 07:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:21 Set channel filter=0.000000e+000 result=40 07:31:21 Config A/D Result=40 07:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:21 Get A/D filter: -9.255963e+061 result=40 07:31:21 Get A/D value=-858993460 result=40 07:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:21 Parameters OK 07:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:21 Set A/D data flow result=40 07:31:21 Set A/D channel type result=40 07:31:21 Set A/D encoding result=40 07:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:21 Set channel filter=0.000000e+000 result=40 07:31:21 Config A/D Result=40 07:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:21 Get A/D filter: -9.255963e+061 result=40 07:31:21 Get A/D value=-858993460 result=40 07:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:21 Aux= 07:31:21 Message to Camera, serial 109254 queued 07:31:58 Received message from Master: op=PointingHead serial=109267 07:31:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:31:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:31:58 Point started: ret=0 07:31:58 point_skyscan result=0 07:31:59 Check angles 07:31:59 SkyScan query 07:31:59 SkyScan query done: ret=0 az=134.67<-8978 ze=36.405<-9573 Statuses=0009 0009 07:31:59 Msec=0 True Az=134.67 Ze=36.405 Az status=0009 Ze status=0009 07:32:00 Check angles 07:32:00 SkyScan query 07:32:00 SkyScan query done: ret=0 az=117.21<-7814 ze=15.465<-10969 Statuses=0009 0009 07:32:00 Msec=750 True Az=117.21 Ze=15.465 Az status=0009 Ze status=0009 07:32:00 Check angles 07:32:00 SkyScan query 07:32:01 SkyScan query done: ret=0 az=99.435<-6629 ze=-5.955<-12397 Statuses=0009 0009 07:32:01 Msec=1500 True Az=99.435 Ze=-5.955 Az status=0009 Ze status=0009 07:32:01 Check angles 07:32:01 SkyScan query 07:32:02 SkyScan query done: ret=0 az=81.915<-5461 ze=-26.94<-13796 Statuses=0009 0009 07:32:02 Msec=2250 True Az=81.915 Ze=-26.94 Az status=0009 Ze status=0009 07:32:02 Check angles 07:32:02 SkyScan query 07:32:02 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.565<-14571 Statuses=0009 0008 07:32:02 Msec=3000 True Az=64.485 Ze=-38.565 Az status=0009 Ze status=0008 07:32:03 Check angles 07:32:03 SkyScan query 07:32:03 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.535<-14569 Statuses=0009 0008 07:32:03 Msec=3750 True Az=47.055 Ze=-38.535 Az status=0009 Ze status=0008 07:32:03 Check angles 07:32:03 SkyScan query 07:32:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:32:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:32:04 Message to Master queued w/err=0: serial=109267 error=0 07:32:09 Received message from Master: op=Filter serial=109268 07:32:09 Color wheel filter change from 0 to 0 07:32:09 FLIGetFilterPos err=0 currentPosition=0 07:32:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:09 Filter is already there-color wheel unchanged 07:32:09 Received message from Master: op=Shutter serial=109269 07:32:09 Shutter LASER close 07:32:09 Received message from Camera: op=State serial=109271 07:32:09 GetSingleValue result=40 Value=cccccccc 07:32:09 SkyScan query 07:32:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:32:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:10 Parameters OK 07:32:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:10 Set A/D data flow result=40 07:32:10 Set A/D channel type result=40 07:32:10 Set A/D encoding result=40 07:32:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:10 Set channel filter=0.000000e+000 result=40 07:32:10 Config A/D Result=40 07:32:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:10 Get A/D filter: -9.255963e+061 result=40 07:32:10 Get A/D value=-858993460 result=40 07:32:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:10 Parameters OK 07:32:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:10 Set A/D data flow result=40 07:32:10 Set A/D channel type result=40 07:32:10 Set A/D encoding result=40 07:32:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:10 Set channel filter=0.000000e+000 result=40 07:32:10 Config A/D Result=40 07:32:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:10 Get A/D filter: -9.255963e+061 result=40 07:32:10 Get A/D value=-858993460 result=40 07:32:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:10 Aux= 07:32:10 Message to Camera, serial 109271 queued 07:32:47 Received message from Master: op=PointingHead serial=109284 07:32:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:32:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:32:47 Point started: ret=0 07:32:47 point_skyscan result=0 07:32:48 Check angles 07:32:48 SkyScan query 07:32:48 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.01<-16534 Statuses=0009 0009 07:32:48 Msec=0 True Az=63.81 Ze=-68.01 Az status=0009 Ze status=0009 07:32:48 Check angles 07:32:48 SkyScan query 07:32:49 SkyScan query done: ret=0 az=81.15<-5410 ze=-88.995<-17933 Statuses=0009 0009 07:32:49 Msec=750 True Az=81.15 Ze=-88.995 Az status=0009 Ze status=0009 07:32:49 Check angles 07:32:49 SkyScan query 07:32:50 SkyScan query done: ret=0 az=98.67<-6578 ze=-109.92<-19328 Statuses=0009 0009 07:32:50 Msec=1500 True Az=98.67 Ze=-109.92 Az status=0009 Ze status=0009 07:32:50 Check angles 07:32:50 SkyScan query 07:32:51 SkyScan query done: ret=0 az=116.16<-7744 ze=-130.905<-20727 Statuses=0009 0009 07:32:51 Msec=2250 True Az=116.16 Ze=-130.905 Az status=0009 Ze status=0009 07:32:51 Check angles 07:32:51 SkyScan query 07:32:51 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.555<-21437 Statuses=0009 0008 07:32:51 Msec=3000 True Az=131.145 Ze=-141.555 Az status=0009 Ze status=0008 07:32:51 Check angles 07:32:51 SkyScan query 07:32:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 07:32:52 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 07:32:52 Message to Master queued w/err=0: serial=109284 error=0 07:32:57 Received message from Master: op=Filter serial=109285 07:32:57 Color wheel filter change from 0 to 0 07:32:57 FLIGetFilterPos err=0 currentPosition=0 07:32:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:57 Filter is already there-color wheel unchanged 07:32:57 Received message from Master: op=Shutter serial=109286 07:32:57 Shutter LASER close 07:32:57 Received message from Camera: op=State serial=109288 07:32:57 GetSingleValue result=40 Value=cccccccc 07:32:57 SkyScan query 07:32:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:32:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:58 Parameters OK 07:32:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:58 Set A/D data flow result=40 07:32:58 Set A/D channel type result=40 07:32:58 Set A/D encoding result=40 07:32:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:58 Set channel filter=0.000000e+000 result=40 07:32:58 Config A/D Result=40 07:32:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:58 Get A/D filter: -9.255963e+061 result=40 07:32:58 Get A/D value=-858993460 result=40 07:32:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:58 Parameters OK 07:32:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:58 Set A/D data flow result=40 07:32:58 Set A/D channel type result=40 07:32:58 Set A/D encoding result=40 07:32:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:58 Set channel filter=0.000000e+000 result=40 07:32:58 Config A/D Result=40 07:32:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:58 Get A/D filter: -9.255963e+061 result=40 07:32:58 Get A/D value=-858993460 result=40 07:32:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:58 Aux= 07:32:58 Message to Camera, serial 109288 queued 07:33:35 Received message from Master: op=PointingHead serial=109301 07:33:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:33:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:33:35 Point started: ret=0 07:33:35 point_skyscan result=0 07:33:36 Check angles 07:33:36 SkyScan query 07:33:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 07:33:36 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 07:33:37 Check angles 07:33:37 SkyScan query 07:33:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:33:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:33:37 Message to Master queued w/err=0: serial=109301 error=0 07:33:42 Received message from Master: op=Filter serial=109302 07:33:42 Color wheel filter change from 0 to 0 07:33:42 FLIGetFilterPos err=0 currentPosition=0 07:33:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:42 Filter is already there-color wheel unchanged 07:33:42 Received message from Master: op=Shutter serial=109303 07:33:42 Shutter LASER open 07:33:42 Received message from Camera: op=State serial=109305 07:33:42 GetSingleValue result=40 Value=cccccccc 07:33:42 SkyScan query 07:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:33:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:43 Parameters OK 07:33:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:43 Set A/D data flow result=40 07:33:43 Set A/D channel type result=40 07:33:43 Set A/D encoding result=40 07:33:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:43 Set channel filter=0.000000e+000 result=40 07:33:43 Config A/D Result=40 07:33:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:43 Get A/D filter: -9.255963e+061 result=40 07:33:43 Get A/D value=-858993460 result=40 07:33:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:43 Parameters OK 07:33:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:43 Set A/D data flow result=40 07:33:43 Set A/D channel type result=40 07:33:43 Set A/D encoding result=40 07:33:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:43 Set channel filter=0.000000e+000 result=40 07:33:43 Config A/D Result=40 07:33:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:43 Get A/D filter: -9.255963e+061 result=40 07:33:43 Get A/D value=-858993460 result=40 07:33:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:43 Aux= 07:33:43 Message to Camera, serial 109305 queued 07:33:51 Received message from Master: op=Shutter serial=109315 07:33:51 Shutter LASER close 07:33:52 Received message from Master: op=PointingHead serial=109319 07:33:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:33:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:33:52 Point started: ret=0 07:33:52 point_skyscan result=0 07:33:53 Check angles 07:33:53 SkyScan query 07:33:54 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.965<-21531 Statuses=0009 0009 07:33:54 Msec=0 True Az=136.38 Ze=-142.965 Az status=0009 Ze status=0009 07:33:54 Check angles 07:33:54 SkyScan query 07:33:55 SkyScan query done: ret=0 az=154.245<-10283 ze=-121.59<-20106 Statuses=0009 0009 07:33:55 Msec=750 True Az=154.245 Ze=-121.59 Az status=0009 Ze status=0009 07:33:55 Check angles 07:33:55 SkyScan query 07:33:55 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.59<-18706 Statuses=0009 0009 07:33:55 Msec=1500 True Az=171.69 Ze=-100.59 Az status=0009 Ze status=0009 07:33:55 Check angles 07:33:55 SkyScan query 07:33:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.71<-17314 Statuses=0008 0009 07:33:56 Msec=2250 True Az=176.01 Ze=-79.71 Az status=0008 Ze status=0009 07:33:56 Check angles 07:33:56 SkyScan query 07:33:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.71<-15914 Statuses=0008 0009 07:33:57 Msec=3000 True Az=176.01 Ze=-58.71 Az status=0008 Ze status=0009 07:33:57 Check angles 07:33:57 SkyScan query 07:33:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:33:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:33:58 Message to Master queued w/err=0: serial=109319 error=0 07:34:03 Received message from Master: op=Filter serial=109320 07:34:03 Color wheel filter change from 0 to 0 07:34:03 FLIGetFilterPos err=0 currentPosition=0 07:34:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:03 Filter is already there-color wheel unchanged 07:34:03 Received message from Master: op=Shutter serial=109321 07:34:03 Shutter LASER close 07:34:03 Received message from Camera: op=State serial=109323 07:34:03 GetSingleValue result=40 Value=cccccccc 07:34:03 SkyScan query 07:34:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:34:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:03 Parameters OK 07:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:03 Set A/D data flow result=40 07:34:03 Set A/D channel type result=40 07:34:03 Set A/D encoding result=40 07:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:03 Set channel filter=0.000000e+000 result=40 07:34:03 Config A/D Result=40 07:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:03 Get A/D filter: -9.255963e+061 result=40 07:34:03 Get A/D value=-858993460 result=40 07:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:03 Parameters OK 07:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:03 Set A/D data flow result=40 07:34:03 Set A/D channel type result=40 07:34:03 Set A/D encoding result=40 07:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:03 Set channel filter=0.000000e+000 result=40 07:34:03 Config A/D Result=40 07:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:03 Get A/D filter: -9.255963e+061 result=40 07:34:03 Get A/D value=-858993460 result=40 07:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:03 Aux= 07:34:03 Message to Camera, serial 109323 queued 07:34:40 Received message from Master: op=PointingHead serial=109336 07:34:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:34:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:34:41 Point started: ret=0 07:34:41 point_skyscan result=0 07:34:41 Check angles 07:34:41 SkyScan query 07:34:42 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.21<-13414 Statuses=0009 0009 07:34:42 Msec=0 True Az=152.565 Ze=-21.21 Az status=0009 Ze status=0009 07:34:42 Check angles 07:34:42 SkyScan query 07:34:43 SkyScan query done: ret=0 az=135.06<-9004 ze=-0.255<-12017 Statuses=0009 0009 07:34:43 Msec=750 True Az=135.06 Ze=-0.255 Az status=0009 Ze status=0009 07:34:43 Check angles 07:34:43 SkyScan query 07:34:43 SkyScan query done: ret=0 az=117.51<-7834 ze=20.685<-10621 Statuses=0009 0009 07:34:43 Msec=1500 True Az=117.51 Ze=20.685 Az status=0009 Ze status=0009 07:34:44 Check angles 07:34:44 SkyScan query 07:34:44 SkyScan query done: ret=0 az=100.17<-6678 ze=41.67<-9222 Statuses=0009 0009 07:34:44 Msec=2250 True Az=100.17 Ze=41.67 Az status=0009 Ze status=0009 07:34:44 Check angles 07:34:44 SkyScan query 07:34:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 07:34:45 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 07:34:45 Check angles 07:34:45 SkyScan query 07:34:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:34:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:34:46 Message to Master queued w/err=0: serial=109336 error=0 07:34:51 Received message from Master: op=Filter serial=109337 07:34:51 Color wheel filter change from 0 to 0 07:34:51 FLIGetFilterPos err=0 currentPosition=0 07:34:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:51 Filter is already there-color wheel unchanged 07:34:51 Received message from Master: op=Shutter serial=109338 07:34:51 Shutter LASER close 07:34:51 Received message from Camera: op=State serial=109340 07:34:51 GetSingleValue result=40 Value=cccccccc 07:34:51 SkyScan query 07:34:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:34:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:52 Parameters OK 07:34:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:52 Set A/D data flow result=40 07:34:52 Set A/D channel type result=40 07:34:52 Set A/D encoding result=40 07:34:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:52 Set channel filter=0.000000e+000 result=40 07:34:52 Config A/D Result=40 07:34:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:52 Get A/D filter: -9.255963e+061 result=40 07:34:52 Get A/D value=-858993460 result=40 07:34:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:52 Parameters OK 07:34:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:52 Set A/D data flow result=40 07:34:52 Set A/D channel type result=40 07:34:52 Set A/D encoding result=40 07:34:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:52 Set channel filter=0.000000e+000 result=40 07:34:52 Config A/D Result=40 07:34:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:52 Get A/D filter: -9.255963e+061 result=40 07:34:52 Get A/D value=-858993460 result=40 07:34:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:52 Aux= 07:34:52 Message to Camera, serial 109340 queued 07:35:28 Received message from Master: op=PointingHead serial=109353 07:35:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:35:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:35:29 Point started: ret=0 07:35:29 point_skyscan result=0 07:35:29 Check angles 07:35:29 SkyScan query 07:35:30 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 07:35:30 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 07:35:30 Check angles 07:35:30 SkyScan query 07:35:31 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 07:35:31 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 07:35:31 Check angles 07:35:31 SkyScan query [UTC 2018-12-13 07:35:32] 07:35:32 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 07:35:32 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 07:35:32 Check angles 07:35:32 SkyScan query 07:35:32 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 07:35:32 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 07:35:32 Check angles 07:35:32 SkyScan query 07:35:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:35:33 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:35:33 Check angles 07:35:33 SkyScan query 07:35:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:35:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:35:34 Message to Master queued w/err=0: serial=109353 error=0 07:35:39 Received message from Master: op=Filter serial=109354 07:35:39 Color wheel filter change from 0 to 0 07:35:39 FLIGetFilterPos err=0 currentPosition=0 07:35:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:39 Filter is already there-color wheel unchanged 07:35:39 Received message from Master: op=Shutter serial=109355 07:35:39 Shutter LASER close 07:35:39 Received message from Camera: op=State serial=109357 07:35:39 GetSingleValue result=40 Value=cccccccc 07:35:39 SkyScan query 07:35:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:35:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:40 Parameters OK 07:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:40 Set A/D data flow result=40 07:35:40 Set A/D channel type result=40 07:35:40 Set A/D encoding result=40 07:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:40 Set channel filter=0.000000e+000 result=40 07:35:40 Config A/D Result=40 07:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:40 Get A/D filter: -9.255963e+061 result=40 07:35:40 Get A/D value=-858993460 result=40 07:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:40 Parameters OK 07:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:40 Set A/D data flow result=40 07:35:40 Set A/D channel type result=40 07:35:40 Set A/D encoding result=40 07:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:40 Set channel filter=0.000000e+000 result=40 07:35:40 Config A/D Result=40 07:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:40 Get A/D filter: -9.255963e+061 result=40 07:35:40 Get A/D value=-858993460 result=40 07:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:40 Aux= 07:35:40 Message to Camera, serial 109357 queued [UTC 2018-12-13 07:35:52] 07:36:16 Received message from Master: op=PointingHead serial=109370 07:36:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:36:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:36:17 Point started: ret=0 07:36:17 point_skyscan result=0 07:36:18 Check angles 07:36:18 SkyScan query 07:36:18 SkyScan query done: ret=0 az=152.715<-10181 ze=8.265<-11449 Statuses=0009 0009 07:36:18 Msec=0 True Az=152.715 Ze=8.265 Az status=0009 Ze status=0009 07:36:18 Check angles 07:36:18 SkyScan query 07:36:19 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.66<-12844 Statuses=0009 0009 07:36:19 Msec=750 True Az=135.165 Ze=-12.66 Az status=0009 Ze status=0009 07:36:19 Check angles 07:36:19 SkyScan query 07:36:20 SkyScan query done: ret=0 az=117.72<-7848 ze=-33.6<-14240 Statuses=0009 0009 07:36:20 Msec=1500 True Az=117.72 Ze=-33.6 Az status=0009 Ze status=0009 07:36:20 Check angles 07:36:20 SkyScan query 07:36:20 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 07:36:20 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 07:36:21 Check angles 07:36:21 SkyScan query 07:36:21 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:36:21 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:36:21 Check angles 07:36:21 SkyScan query 07:36:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:36:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:36:22 Message to Master queued w/err=0: serial=109370 error=0 07:36:27 Received message from Master: op=Filter serial=109371 07:36:27 Color wheel filter change from 0 to 0 07:36:27 FLIGetFilterPos err=0 currentPosition=0 07:36:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:27 Filter is already there-color wheel unchanged 07:36:27 Received message from Master: op=Shutter serial=109372 07:36:27 Shutter LASER close 07:36:27 Received message from Camera: op=State serial=109374 07:36:27 GetSingleValue result=40 Value=cccccccc 07:36:27 SkyScan query 07:36:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:36:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:28 Parameters OK 07:36:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:28 Set A/D data flow result=40 07:36:28 Set A/D channel type result=40 07:36:28 Set A/D encoding result=40 07:36:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:28 Set channel filter=0.000000e+000 result=40 07:36:28 Config A/D Result=40 07:36:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:28 Get A/D filter: -9.255963e+061 result=40 07:36:28 Get A/D value=-858993460 result=40 07:36:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:28 Parameters OK 07:36:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:28 Set A/D data flow result=40 07:36:28 Set A/D channel type result=40 07:36:28 Set A/D encoding result=40 07:36:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:28 Set channel filter=0.000000e+000 result=40 07:36:28 Config A/D Result=40 07:36:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:28 Get A/D filter: -9.255963e+061 result=40 07:36:28 Get A/D value=-858993460 result=40 07:36:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:28 Aux= 07:36:28 Message to Camera, serial 109374 queued 07:37:05 Received message from Master: op=PointingHead serial=109387 07:37:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:37:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:37:05 Point started: ret=0 07:37:05 point_skyscan result=0 07:37:06 Check angles 07:37:06 SkyScan query 07:37:06 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.63<-17442 Statuses=0009 0009 07:37:06 Msec=0 True Az=109.32 Ze=-81.63 Az status=0009 Ze status=0009 07:37:06 Check angles 07:37:06 SkyScan query 07:37:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.035<-18869 Statuses=0008 0009 07:37:07 Msec=750 True Az=112.995 Ze=-103.035 Az status=0008 Ze status=0009 07:37:07 Check angles 07:37:07 SkyScan query 07:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.99<-20266 Statuses=0008 0009 07:37:08 Msec=1500 True Az=112.995 Ze=-123.99 Az status=0008 Ze status=0009 07:37:08 Check angles 07:37:08 SkyScan query 07:37:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 07:37:09 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 07:37:09 Check angles 07:37:09 SkyScan query 07:37:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 07:37:09 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 07:37:09 Check angles 07:37:09 SkyScan query 07:37:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:37:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:37:10 Message to Master queued w/err=0: serial=109387 error=0 07:37:15 Received message from Master: op=Filter serial=109388 07:37:15 Color wheel filter change from 0 to 0 07:37:15 FLIGetFilterPos err=0 currentPosition=0 07:37:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:15 Filter is already there-color wheel unchanged 07:37:15 Received message from Master: op=Shutter serial=109389 07:37:15 Shutter LASER open 07:37:15 Received message from Camera: op=State serial=109391 07:37:15 GetSingleValue result=40 Value=cccccccc 07:37:15 SkyScan query 07:37:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:37:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:16 Parameters OK 07:37:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:16 Set A/D data flow result=40 07:37:16 Set A/D channel type result=40 07:37:16 Set A/D encoding result=40 07:37:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:16 Set channel filter=0.000000e+000 result=40 07:37:16 Config A/D Result=40 07:37:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:16 Get A/D filter: -9.255963e+061 result=40 07:37:16 Get A/D value=-858993460 result=40 07:37:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:16 Parameters OK 07:37:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:16 Set A/D data flow result=40 07:37:16 Set A/D channel type result=40 07:37:16 Set A/D encoding result=40 07:37:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:16 Set channel filter=0.000000e+000 result=40 07:37:16 Config A/D Result=40 07:37:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:16 Get A/D filter: -9.255963e+061 result=40 07:37:16 Get A/D value=-858993460 result=40 07:37:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:16 Aux= 07:37:16 Message to Camera, serial 109391 queued 07:37:24 Received message from Master: op=Shutter serial=109401 07:37:24 Shutter LASER close 07:37:25 Received message from Master: op=PointingHead serial=109405 07:37:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:37:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:37:25 Point started: ret=0 07:37:25 point_skyscan result=0 07:37:26 Check angles 07:37:26 SkyScan query 07:37:27 SkyScan query done: ret=0 az=90.105<-6007 ze=157.515<-1499 Statuses=0009 0009 07:37:27 Msec=0 True Az=90.105 Ze=157.515 Az status=0009 Ze status=0009 07:37:27 Check angles 07:37:27 SkyScan query 07:37:27 SkyScan query done: ret=0 az=72.675<-4845 ze=136.515<-2899 Statuses=0009 0009 07:37:27 Msec=750 True Az=72.675 Ze=136.515 Az status=0009 Ze status=0009 07:37:27 Check angles 07:37:27 SkyScan query 07:37:28 SkyScan query done: ret=0 az=55.14<-3676 ze=115.605<-4293 Statuses=0009 0009 07:37:28 Msec=1500 True Az=55.14 Ze=115.605 Az status=0009 Ze status=0009 07:37:28 Check angles 07:37:28 SkyScan query 07:37:29 SkyScan query done: ret=0 az=40.875<-2725 ze=94.185<-5721 Statuses=0009 0009 07:37:29 Msec=2250 True Az=40.875 Ze=94.185 Az status=0009 Ze status=0009 07:37:29 Check angles 07:37:29 SkyScan query 07:37:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 07:37:30 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 07:37:30 Check angles 07:37:30 SkyScan query 07:37:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 07:37:30 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 07:37:30 Check angles 07:37:30 SkyScan query 07:37:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:37:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:37:31 Message to Master queued w/err=0: serial=109405 error=0 07:37:36 Received message from Master: op=Filter serial=109406 07:37:36 Color wheel filter change from 0 to 0 07:37:36 FLIGetFilterPos err=0 currentPosition=0 07:37:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:36 Filter is already there-color wheel unchanged 07:37:36 Received message from Master: op=Shutter serial=109407 07:37:36 Shutter LASER close 07:37:36 Received message from Camera: op=State serial=109409 07:37:36 GetSingleValue result=40 Value=cccccccc 07:37:36 SkyScan query 07:37:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:37:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:37 Parameters OK 07:37:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:37 Set A/D data flow result=40 07:37:37 Set A/D channel type result=40 07:37:37 Set A/D encoding result=40 07:37:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:37 Set channel filter=0.000000e+000 result=40 07:37:37 Config A/D Result=40 07:37:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:37 Get A/D filter: -9.255963e+061 result=40 07:37:37 Get A/D value=-858993460 result=40 07:37:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:37 Parameters OK 07:37:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:37 Set A/D data flow result=40 07:37:37 Set A/D channel type result=40 07:37:37 Set A/D encoding result=40 07:37:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:37 Set channel filter=0.000000e+000 result=40 07:37:37 Config A/D Result=40 07:37:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:37 Get A/D filter: -9.255963e+061 result=40 07:37:37 Get A/D value=-858993460 result=40 07:37:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:37 Aux= 07:37:37 Message to Camera, serial 109409 queued 07:38:13 Received message from Master: op=PointingHead serial=109421 07:38:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:38:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:38:13 Point started: ret=0 07:38:13 point_skyscan result=0 07:38:14 Check angles 07:38:14 SkyScan query 07:38:15 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 07:38:15 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 07:38:15 Check angles 07:38:15 SkyScan query 07:38:15 SkyScan query done: ret=0 az=81.18<-5412 ze=66.495<-7567 Statuses=0009 0008 07:38:15 Msec=750 True Az=81.18 Ze=66.495 Az status=0009 Ze status=0008 07:38:15 Check angles 07:38:15 SkyScan query 07:38:16 SkyScan query done: ret=0 az=98.715<-6581 ze=66.495<-7567 Statuses=0009 0008 07:38:16 Msec=1500 True Az=98.715 Ze=66.495 Az status=0009 Ze status=0008 07:38:16 Check angles 07:38:16 SkyScan query 07:38:17 SkyScan query done: ret=0 az=116.235<-7749 ze=66.495<-7567 Statuses=0009 0008 07:38:17 Msec=2250 True Az=116.235 Ze=66.495 Az status=0009 Ze status=0008 07:38:17 Check angles 07:38:17 SkyScan query 07:38:18 SkyScan query done: ret=0 az=133.74<-8916 ze=66.495<-7567 Statuses=0009 0008 07:38:18 Msec=3000 True Az=133.74 Ze=66.495 Az status=0009 Ze status=0008 07:38:18 Check angles 07:38:18 SkyScan query 07:38:18 SkyScan query done: ret=0 az=151.545<-10103 ze=66.495<-7567 Statuses=0009 0008 07:38:18 Msec=3750 True Az=151.545 Ze=66.495 Az status=0009 Ze status=0008 07:38:18 Check angles 07:38:18 SkyScan query 07:38:19 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 07:38:19 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 07:38:19 Message to Master queued w/err=0: serial=109421 error=0 07:38:24 Received message from Master: op=Filter serial=109422 07:38:24 Color wheel filter change from 0 to 0 07:38:24 FLIGetFilterPos err=0 currentPosition=0 07:38:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:24 Filter is already there-color wheel unchanged 07:38:24 Received message from Master: op=Shutter serial=109423 07:38:24 Shutter LASER close 07:38:24 Received message from Camera: op=State serial=109425 07:38:24 GetSingleValue result=40 Value=cccccccc 07:38:24 SkyScan query 07:38:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:38:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:25 Parameters OK 07:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:25 Set A/D data flow result=40 07:38:25 Set A/D channel type result=40 07:38:25 Set A/D encoding result=40 07:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:25 Set channel filter=0.000000e+000 result=40 07:38:25 Config A/D Result=40 07:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:25 Get A/D filter: -9.255963e+061 result=40 07:38:25 Get A/D value=-858993460 result=40 07:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:25 Parameters OK 07:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:25 Set A/D data flow result=40 07:38:25 Set A/D channel type result=40 07:38:25 Set A/D encoding result=40 07:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:25 Set channel filter=0.000000e+000 result=40 07:38:25 Config A/D Result=40 07:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:25 Get A/D filter: -9.255963e+061 result=40 07:38:25 Get A/D value=-858993460 result=40 07:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:25 Aux= 07:38:25 Message to Camera, serial 109425 queued 07:39:02 Received message from Master: op=PointingHead serial=109438 07:39:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:39:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:39:02 Point started: ret=0 07:39:02 point_skyscan result=0 07:39:03 Check angles 07:39:03 SkyScan query 07:39:03 SkyScan query done: ret=0 az=134.895<-8993 ze=36.705<-9553 Statuses=0009 0009 07:39:03 Msec=0 True Az=134.895 Ze=36.705 Az status=0009 Ze status=0009 07:39:04 Check angles 07:39:04 SkyScan query 07:39:04 SkyScan query done: ret=0 az=117.405<-7827 ze=15.765<-10949 Statuses=0009 0009 07:39:04 Msec=750 True Az=117.405 Ze=15.765 Az status=0009 Ze status=0009 07:39:04 Check angles 07:39:04 SkyScan query 07:39:05 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.625<-12375 Statuses=0009 0009 07:39:05 Msec=1500 True Az=99.78 Ze=-5.625 Az status=0009 Ze status=0009 07:39:05 Check angles 07:39:05 SkyScan query 07:39:06 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.565<-13771 Statuses=0009 0009 07:39:06 Msec=2250 True Az=82.245 Ze=-26.565 Az status=0009 Ze status=0009 07:39:06 Check angles 07:39:06 SkyScan query 07:39:06 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.58<-14572 Statuses=0009 0008 07:39:06 Msec=3000 True Az=64.755 Ze=-38.58 Az status=0009 Ze status=0008 07:39:07 Check angles 07:39:07 SkyScan query 07:39:07 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.535<-14569 Statuses=0009 0008 07:39:07 Msec=3750 True Az=47.31 Ze=-38.535 Az status=0009 Ze status=0008 07:39:07 Check angles 07:39:07 SkyScan query 07:39:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:39:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:39:08 Message to Master queued w/err=0: serial=109438 error=0 07:39:13 Received message from Master: op=Filter serial=109439 07:39:13 Color wheel filter change from 0 to 0 07:39:13 FLIGetFilterPos err=0 currentPosition=0 07:39:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:13 Filter is already there-color wheel unchanged 07:39:13 Received message from Master: op=Shutter serial=109440 07:39:13 Shutter LASER close 07:39:13 Received message from Camera: op=State serial=109442 07:39:13 GetSingleValue result=40 Value=cccccccc 07:39:13 SkyScan query 07:39:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:39:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:14 Parameters OK 07:39:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:14 Set A/D data flow result=40 07:39:14 Set A/D channel type result=40 07:39:14 Set A/D encoding result=40 07:39:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:14 Set channel filter=0.000000e+000 result=40 07:39:14 Config A/D Result=40 07:39:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:14 Get A/D filter: -9.255963e+061 result=40 07:39:14 Get A/D value=-858993460 result=40 07:39:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:14 Parameters OK 07:39:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:14 Set A/D data flow result=40 07:39:14 Set A/D channel type result=40 07:39:14 Set A/D encoding result=40 07:39:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:14 Set channel filter=0.000000e+000 result=40 07:39:14 Config A/D Result=40 07:39:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:14 Get A/D filter: -9.255963e+061 result=40 07:39:14 Get A/D value=-858993460 result=40 07:39:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:14 Aux= 07:39:14 Message to Camera, serial 109442 queued 07:39:50 Received message from Master: op=PointingHead serial=109455 07:39:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:39:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:39:51 Point started: ret=0 07:39:51 point_skyscan result=0 07:39:52 Check angles 07:39:52 SkyScan query 07:39:52 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.325<-16555 Statuses=0009 0009 07:39:52 Msec=0 True Az=64.08 Ze=-68.325 Az status=0009 Ze status=0009 07:39:52 Check angles 07:39:52 SkyScan query 07:39:53 SkyScan query done: ret=0 az=81.48<-5432 ze=-89.325<-17955 Statuses=0009 0009 07:39:53 Msec=750 True Az=81.48 Ze=-89.325 Az status=0009 Ze status=0009 07:39:53 Check angles 07:39:53 SkyScan query 07:39:54 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.28<-19352 Statuses=0009 0009 07:39:54 Msec=1500 True Az=98.91 Ze=-110.28 Az status=0009 Ze status=0009 07:39:54 Check angles 07:39:54 SkyScan query 07:39:54 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.22<-20748 Statuses=0009 0009 07:39:54 Msec=2250 True Az=116.595 Ze=-131.22 Az status=0009 Ze status=0009 07:39:55 Check angles 07:39:55 SkyScan query 07:39:55 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.555<-21437 Statuses=0009 0008 07:39:55 Msec=3000 True Az=131.13 Ze=-141.555 Az status=0009 Ze status=0008 07:39:55 Check angles 07:39:55 SkyScan query 07:39:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 07:39:56 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 07:39:56 Message to Master queued w/err=0: serial=109455 error=0 07:40:01 Received message from Master: op=Filter serial=109456 07:40:01 Color wheel filter change from 0 to 0 07:40:01 FLIGetFilterPos err=0 currentPosition=0 07:40:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:01 Filter is already there-color wheel unchanged 07:40:01 Received message from Master: op=Shutter serial=109457 07:40:01 Shutter LASER close 07:40:01 Received message from Camera: op=State serial=109459 07:40:01 GetSingleValue result=40 Value=cccccccc 07:40:01 SkyScan query 07:40:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:40:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:02 Parameters OK 07:40:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:02 Set A/D data flow result=40 07:40:02 Set A/D channel type result=40 07:40:02 Set A/D encoding result=40 07:40:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:02 Set channel filter=0.000000e+000 result=40 07:40:02 Config A/D Result=40 07:40:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:02 Get A/D filter: -9.255963e+061 result=40 07:40:02 Get A/D value=-858993460 result=40 07:40:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:02 Parameters OK 07:40:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:02 Set A/D data flow result=40 07:40:02 Set A/D channel type result=40 07:40:02 Set A/D encoding result=40 07:40:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:02 Set channel filter=0.000000e+000 result=40 07:40:02 Config A/D Result=40 07:40:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:02 Get A/D filter: -9.255963e+061 result=40 07:40:02 Get A/D value=-858993460 result=40 07:40:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:02 Aux= 07:40:02 Message to Camera, serial 109459 queued 07:40:39 Received message from Master: op=PointingHead serial=109472 07:40:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:40:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:40:39 Point started: ret=0 07:40:39 point_skyscan result=0 07:40:40 Check angles 07:40:40 SkyScan query 07:40:40 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 07:40:40 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 07:40:40 Check angles 07:40:40 SkyScan query 07:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:40:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:40:41 Message to Master queued w/err=0: serial=109472 error=0 07:40:46 Received message from Master: op=Filter serial=109473 07:40:46 Color wheel filter change from 0 to 0 07:40:46 FLIGetFilterPos err=0 currentPosition=0 07:40:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:46 Filter is already there-color wheel unchanged 07:40:46 Received message from Master: op=Shutter serial=109474 07:40:46 Shutter LASER open 07:40:46 Received message from Camera: op=State serial=109476 07:40:46 GetSingleValue result=40 Value=cccccccc 07:40:46 SkyScan query 07:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:40:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:47 Parameters OK 07:40:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:47 Set A/D data flow result=40 07:40:47 Set A/D channel type result=40 07:40:47 Set A/D encoding result=40 07:40:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:47 Set channel filter=0.000000e+000 result=40 07:40:47 Config A/D Result=40 07:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:47 Get A/D filter: -9.255963e+061 result=40 07:40:47 Get A/D value=-858993460 result=40 07:40:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:47 Parameters OK 07:40:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:47 Set A/D data flow result=40 07:40:47 Set A/D channel type result=40 07:40:47 Set A/D encoding result=40 07:40:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:47 Set channel filter=0.000000e+000 result=40 07:40:47 Config A/D Result=40 07:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:47 Get A/D filter: -9.255963e+061 result=40 07:40:47 Get A/D value=-858993460 result=40 07:40:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:47 Aux= 07:40:47 Message to Camera, serial 109476 queued 07:40:55 Received message from Master: op=Shutter serial=109486 07:40:55 Shutter LASER close 07:40:56 Received message from Master: op=PointingHead serial=109490 07:40:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:40:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:40:56 Point started: ret=0 07:40:56 point_skyscan result=0 07:40:57 Check angles 07:40:57 SkyScan query 07:40:58 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.1<-21540 Statuses=0009 0009 07:40:58 Msec=0 True Az=136.185 Ze=-143.1 Az status=0009 Ze status=0009 07:40:58 Check angles 07:40:58 SkyScan query 07:40:58 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.115<-20141 Statuses=0009 0009 07:40:58 Msec=750 True Az=153.57 Ze=-122.115 Az status=0009 Ze status=0009 07:40:59 Check angles 07:40:59 SkyScan query 07:40:59 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.25<-18750 Statuses=0009 0009 07:40:59 Msec=1500 True Az=171.015 Ze=-101.25 Az status=0009 Ze status=0009 07:40:59 Check angles 07:40:59 SkyScan query 07:41:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.28<-17352 Statuses=0008 0009 07:41:00 Msec=2250 True Az=176.01 Ze=-80.28 Az status=0008 Ze status=0009 07:41:00 Check angles 07:41:00 SkyScan query 07:41:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.83<-15922 Statuses=0008 0009 07:41:01 Msec=3000 True Az=176.01 Ze=-58.83 Az status=0008 Ze status=0009 07:41:01 Check angles 07:41:01 SkyScan query 07:41:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:41:01 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:41:01 Message to Master queued w/err=0: serial=109490 error=0 07:41:06 Received message from Master: op=Filter serial=109491 07:41:06 Color wheel filter change from 0 to 0 07:41:06 FLIGetFilterPos err=0 currentPosition=0 07:41:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:06 Filter is already there-color wheel unchanged 07:41:07 Received message from Master: op=Shutter serial=109492 07:41:07 Shutter LASER close 07:41:07 Received message from Camera: op=State serial=109494 07:41:07 GetSingleValue result=40 Value=cccccccc 07:41:07 SkyScan query 07:41:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:41:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:07 Parameters OK 07:41:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:07 Set A/D data flow result=40 07:41:07 Set A/D channel type result=40 07:41:07 Set A/D encoding result=40 07:41:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:07 Set channel filter=0.000000e+000 result=40 07:41:07 Config A/D Result=40 07:41:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:07 Get A/D filter: -9.255963e+061 result=40 07:41:07 Get A/D value=-858993460 result=40 07:41:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:07 Parameters OK 07:41:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:07 Set A/D data flow result=40 07:41:07 Set A/D channel type result=40 07:41:07 Set A/D encoding result=40 07:41:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:07 Set channel filter=0.000000e+000 result=40 07:41:07 Config A/D Result=40 07:41:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:07 Get A/D filter: -9.255963e+061 result=40 07:41:07 Get A/D value=-858993460 result=40 07:41:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:07 Aux= 07:41:07 Message to Camera, serial 109494 queued 07:41:44 Received message from Master: op=PointingHead serial=109507 07:41:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:41:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:41:45 Point started: ret=0 07:41:45 point_skyscan result=0 07:41:45 Check angles 07:41:45 SkyScan query 07:41:46 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.69<-13446 Statuses=0009 0009 07:41:46 Msec=0 True Az=152.97 Ze=-21.69 Az status=0009 Ze status=0009 07:41:46 Check angles 07:41:46 SkyScan query 07:41:47 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.27<-12018 Statuses=0009 0009 07:41:47 Msec=750 True Az=135.09 Ze=-0.27 Az status=0009 Ze status=0009 07:41:47 Check angles 07:41:47 SkyScan query 07:41:47 SkyScan query done: ret=0 az=117.57<-7838 ze=20.67<-10622 Statuses=0009 0009 07:41:47 Msec=1500 True Az=117.57 Ze=20.67 Az status=0009 Ze status=0009 07:41:48 Check angles 07:41:48 SkyScan query 07:41:48 SkyScan query done: ret=0 az=100.185<-6679 ze=41.655<-9223 Statuses=0009 0009 07:41:48 Msec=2250 True Az=100.185 Ze=41.655 Az status=0009 Ze status=0009 07:41:48 Check angles 07:41:48 SkyScan query 07:41:49 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 07:41:49 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 07:41:49 Check angles 07:41:49 SkyScan query 07:41:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:41:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:41:50 Message to Master queued w/err=0: serial=109507 error=0 07:41:55 Received message from Master: op=Filter serial=109508 07:41:55 Color wheel filter change from 0 to 0 07:41:55 FLIGetFilterPos err=0 currentPosition=0 07:41:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:55 Filter is already there-color wheel unchanged 07:41:55 Received message from Master: op=Shutter serial=109509 07:41:55 Shutter LASER close 07:41:55 Received message from Camera: op=State serial=109511 07:41:55 GetSingleValue result=40 Value=cccccccc 07:41:55 SkyScan query 07:41:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:41:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:55 Parameters OK 07:41:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:55 Set A/D data flow result=40 07:41:55 Set A/D channel type result=40 07:41:55 Set A/D encoding result=40 07:41:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:55 Set channel filter=0.000000e+000 result=40 07:41:55 Config A/D Result=40 07:41:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:55 Get A/D filter: -9.255963e+061 result=40 07:41:55 Get A/D value=-858993460 result=40 07:41:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:55 Parameters OK 07:41:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:55 Set A/D data flow result=40 07:41:55 Set A/D channel type result=40 07:41:55 Set A/D encoding result=40 07:41:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:55 Set channel filter=0.000000e+000 result=40 07:41:55 Config A/D Result=40 07:41:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:55 Get A/D filter: -9.255963e+061 result=40 07:41:55 Get A/D value=-858993460 result=40 07:41:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:55 Aux= 07:41:55 Message to Camera, serial 109511 queued 07:42:32 Received message from Master: op=PointingHead serial=109524 07:42:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:42:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:42:33 Point started: ret=0 07:42:33 point_skyscan result=0 07:42:33 Check angles 07:42:33 SkyScan query 07:42:34 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 07:42:34 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 07:42:34 Check angles 07:42:34 SkyScan query 07:42:35 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 07:42:35 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 07:42:35 Check angles 07:42:35 SkyScan query 07:42:36 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 07:42:36 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 07:42:36 Check angles 07:42:36 SkyScan query 07:42:36 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 07:42:36 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 07:42:36 Check angles 07:42:36 SkyScan query 07:42:37 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:42:37 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:42:37 Check angles 07:42:37 SkyScan query 07:42:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:42:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:42:38 Message to Master queued w/err=0: serial=109524 error=0 07:42:43 Received message from Master: op=Filter serial=109525 07:42:43 Color wheel filter change from 0 to 0 07:42:43 FLIGetFilterPos err=0 currentPosition=0 07:42:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:43 Filter is already there-color wheel unchanged 07:42:43 Received message from Master: op=Shutter serial=109526 07:42:43 Shutter LASER close 07:42:43 Received message from Camera: op=State serial=109528 07:42:43 GetSingleValue result=40 Value=cccccccc 07:42:43 SkyScan query 07:42:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:42:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:44 Parameters OK 07:42:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:44 Set A/D data flow result=40 07:42:44 Set A/D channel type result=40 07:42:44 Set A/D encoding result=40 07:42:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:44 Set channel filter=0.000000e+000 result=40 07:42:44 Config A/D Result=40 07:42:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:44 Get A/D filter: -9.255963e+061 result=40 07:42:44 Get A/D value=-858993460 result=40 07:42:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:44 Parameters OK 07:42:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:44 Set A/D data flow result=40 07:42:44 Set A/D channel type result=40 07:42:44 Set A/D encoding result=40 07:42:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:44 Set channel filter=0.000000e+000 result=40 07:42:44 Config A/D Result=40 07:42:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:44 Get A/D filter: -9.255963e+061 result=40 07:42:44 Get A/D value=-858993460 result=40 07:42:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:44 Aux= 07:42:44 Message to Camera, serial 109528 queued 07:43:20 Received message from Master: op=PointingHead serial=109541 07:43:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:43:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:43:21 Point started: ret=0 07:43:21 point_skyscan result=0 07:43:21 Check angles 07:43:21 SkyScan query 07:43:22 SkyScan query done: ret=0 az=152.775<-10185 ze=8.37<-11442 Statuses=0009 0009 07:43:22 Msec=0 True Az=152.775 Ze=8.37 Az status=0009 Ze status=0009 07:43:22 Check angles 07:43:22 SkyScan query 07:43:23 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.525<-12835 Statuses=0009 0009 07:43:23 Msec=750 True Az=135.345 Ze=-12.525 Az status=0009 Ze status=0009 07:43:23 Check angles 07:43:23 SkyScan query 07:43:24 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.495<-14233 Statuses=0009 0009 07:43:24 Msec=1500 True Az=117.78 Ze=-33.495 Az status=0009 Ze status=0009 07:43:24 Check angles 07:43:24 SkyScan query 07:43:24 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 07:43:24 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 07:43:24 Check angles 07:43:24 SkyScan query 07:43:25 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:43:25 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:43:25 Check angles 07:43:25 SkyScan query 07:43:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:43:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:43:26 Message to Master queued w/err=0: serial=109541 error=0 07:43:31 Received message from Master: op=Filter serial=109542 07:43:31 Color wheel filter change from 0 to 0 07:43:31 FLIGetFilterPos err=0 currentPosition=0 07:43:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:31 Filter is already there-color wheel unchanged 07:43:31 Received message from Master: op=Shutter serial=109543 07:43:31 Shutter LASER close 07:43:31 Received message from Camera: op=State serial=109545 07:43:31 GetSingleValue result=40 Value=cccccccc 07:43:31 SkyScan query 07:43:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:43:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:32 Parameters OK 07:43:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:32 Set A/D data flow result=40 07:43:32 Set A/D channel type result=40 07:43:32 Set A/D encoding result=40 07:43:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:32 Set channel filter=0.000000e+000 result=40 07:43:32 Config A/D Result=40 07:43:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:32 Get A/D filter: -9.255963e+061 result=40 07:43:32 Get A/D value=-858993460 result=40 07:43:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:32 Parameters OK 07:43:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:32 Set A/D data flow result=40 07:43:32 Set A/D channel type result=40 07:43:32 Set A/D encoding result=40 07:43:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:32 Set channel filter=0.000000e+000 result=40 07:43:32 Config A/D Result=40 07:43:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:32 Get A/D filter: -9.255963e+061 result=40 07:43:32 Get A/D value=-858993460 result=40 07:43:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:32 Aux= 07:43:32 Message to Camera, serial 109545 queued 07:44:08 Received message from Master: op=PointingHead serial=109558 07:44:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:44:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:44:09 Point started: ret=0 07:44:09 point_skyscan result=0 07:44:10 Check angles 07:44:10 SkyScan query 07:44:10 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.045<-17403 Statuses=0009 0009 07:44:10 Msec=0 True Az=108.825 Ze=-81.045 Az status=0009 Ze status=0009 07:44:10 Check angles 07:44:10 SkyScan query 07:44:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 07:44:11 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 07:44:11 Check angles 07:44:11 SkyScan query 07:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 07:44:12 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 07:44:12 Check angles 07:44:12 SkyScan query 07:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 07:44:12 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 07:44:13 Check angles 07:44:13 SkyScan query 07:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 07:44:13 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 07:44:13 Check angles 07:44:13 SkyScan query 07:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:44:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:44:14 Message to Master queued w/err=0: serial=109558 error=0 07:44:19 Received message from Master: op=Filter serial=109559 07:44:19 Color wheel filter change from 0 to 0 07:44:19 FLIGetFilterPos err=0 currentPosition=0 07:44:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:19 Filter is already there-color wheel unchanged 07:44:19 Received message from Master: op=Shutter serial=109560 07:44:19 Shutter LASER open 07:44:19 Received message from Camera: op=State serial=109562 07:44:19 GetSingleValue result=40 Value=cccccccc 07:44:19 SkyScan query 07:44:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:44:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:20 Parameters OK 07:44:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:20 Set A/D data flow result=40 07:44:20 Set A/D channel type result=40 07:44:20 Set A/D encoding result=40 07:44:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:20 Set channel filter=0.000000e+000 result=40 07:44:20 Config A/D Result=40 07:44:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:20 Get A/D filter: -9.255963e+061 result=40 07:44:20 Get A/D value=-858993460 result=40 07:44:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:20 Parameters OK 07:44:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:20 Set A/D data flow result=40 07:44:20 Set A/D channel type result=40 07:44:20 Set A/D encoding result=40 07:44:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:20 Set channel filter=0.000000e+000 result=40 07:44:20 Config A/D Result=40 07:44:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:20 Get A/D filter: -9.255963e+061 result=40 07:44:20 Get A/D value=-858993460 result=40 07:44:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:20 Aux= 07:44:20 Message to Camera, serial 109562 queued 07:44:28 Received message from Master: op=Shutter serial=109572 07:44:28 Shutter LASER close 07:44:29 Received message from Master: op=PointingHead serial=109576 07:44:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:44:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:44:29 Point started: ret=0 07:44:29 point_skyscan result=0 07:44:30 Check angles 07:44:30 SkyScan query 07:44:30 SkyScan query done: ret=0 az=90.03<-6002 ze=157.26<-1516 Statuses=0009 0009 07:44:30 Msec=0 True Az=90.03 Ze=157.26 Az status=0009 Ze status=0009 07:44:31 Check angles 07:44:31 SkyScan query 07:44:31 SkyScan query done: ret=0 az=72.555<-4837 ze=136.395<-2907 Statuses=0009 0009 07:44:31 Msec=750 True Az=72.555 Ze=136.395 Az status=0009 Ze status=0009 07:44:31 Check angles 07:44:31 SkyScan query 07:44:32 SkyScan query done: ret=0 az=55.095<-3673 ze=115.47<-4302 Statuses=0009 0009 07:44:32 Msec=1500 True Az=55.095 Ze=115.47 Az status=0009 Ze status=0009 07:44:32 Check angles 07:44:32 SkyScan query 07:44:33 SkyScan query done: ret=0 az=40.89<-2726 ze=94.02<-5732 Statuses=0009 0009 07:44:33 Msec=2250 True Az=40.89 Ze=94.02 Az status=0009 Ze status=0009 07:44:33 Check angles 07:44:33 SkyScan query 07:44:33 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 07:44:33 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 07:44:34 Check angles 07:44:34 SkyScan query 07:44:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 07:44:34 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 07:44:34 Check angles 07:44:34 SkyScan query 07:44:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:44:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:44:35 Message to Master queued w/err=0: serial=109576 error=0 07:44:40 Received message from Master: op=Filter serial=109577 07:44:40 Color wheel filter change from 0 to 0 07:44:40 FLIGetFilterPos err=0 currentPosition=0 07:44:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:40 Filter is already there-color wheel unchanged 07:44:40 Received message from Master: op=Shutter serial=109578 07:44:40 Shutter LASER close 07:44:40 Received message from Camera: op=State serial=109580 07:44:40 GetSingleValue result=40 Value=cccccccc 07:44:40 SkyScan query 07:44:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:44:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:41 Parameters OK 07:44:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:41 Set A/D data flow result=40 07:44:41 Set A/D channel type result=40 07:44:41 Set A/D encoding result=40 07:44:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:41 Set channel filter=0.000000e+000 result=40 07:44:41 Config A/D Result=40 07:44:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:41 Get A/D filter: -9.255963e+061 result=40 07:44:41 Get A/D value=-858993460 result=40 07:44:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:41 Parameters OK 07:44:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:41 Set A/D data flow result=40 07:44:41 Set A/D channel type result=40 07:44:41 Set A/D encoding result=40 07:44:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:41 Set channel filter=0.000000e+000 result=40 07:44:41 Config A/D Result=40 07:44:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:41 Get A/D filter: -9.255963e+061 result=40 07:44:41 Get A/D value=-858993460 result=40 07:44:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:41 Aux= 07:44:41 Message to Camera, serial 109580 queued 07:45:18 Received message from Master: op=PointingHead serial=109593 07:45:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:45:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:45:18 Point started: ret=0 07:45:18 point_skyscan result=0 07:45:19 Check angles 07:45:19 SkyScan query 07:45:19 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 07:45:19 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 07:45:19 Check angles 07:45:19 SkyScan query 07:45:20 SkyScan query done: ret=0 az=81.765<-5451 ze=66.495<-7567 Statuses=0009 0008 07:45:20 Msec=750 True Az=81.765 Ze=66.495 Az status=0009 Ze status=0008 07:45:20 Check angles 07:45:20 SkyScan query 07:45:21 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 07:45:21 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 07:45:21 Check angles 07:45:21 SkyScan query 07:45:22 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 07:45:22 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 07:45:22 Check angles 07:45:22 SkyScan query 07:45:22 SkyScan query done: ret=0 az=134.295<-8953 ze=66.495<-7567 Statuses=0009 0008 07:45:22 Msec=3000 True Az=134.295 Ze=66.495 Az status=0009 Ze status=0008 07:45:22 Check angles 07:45:22 SkyScan query 07:45:23 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 07:45:23 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 07:45:23 Check angles 07:45:23 SkyScan query 07:45:24 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 07:45:24 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 07:45:24 Message to Master queued w/err=0: serial=109593 error=0 07:45:27 Received message from Master: op=Identify serial=109594 07:45:29 Received message from Master: op=Filter serial=109597 07:45:29 Color wheel filter change from 0 to 0 07:45:29 FLIGetFilterPos err=0 currentPosition=0 07:45:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:29 Filter is already there-color wheel unchanged 07:45:29 Received message from Master: op=Shutter serial=109598 07:45:29 Shutter LASER close 07:45:29 Received message from Camera: op=State serial=109600 07:45:29 GetSingleValue result=40 Value=cccccccc 07:45:29 SkyScan query 07:45:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:45:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:30 Parameters OK 07:45:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:30 Set A/D data flow result=40 07:45:30 Set A/D channel type result=40 07:45:30 Set A/D encoding result=40 07:45:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:30 Set channel filter=0.000000e+000 result=40 07:45:30 Config A/D Result=40 07:45:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:30 Get A/D filter: -9.255963e+061 result=40 07:45:30 Get A/D value=-858993460 result=40 07:45:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:30 Parameters OK 07:45:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:30 Set A/D data flow result=40 07:45:30 Set A/D channel type result=40 07:45:30 Set A/D encoding result=40 07:45:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:30 Set channel filter=0.000000e+000 result=40 07:45:30 Config A/D Result=40 07:45:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:30 Get A/D filter: -9.255963e+061 result=40 [UTC 2018-12-13 07:45:30] 07:45:30 Get A/D value=-858993460 result=40 07:45:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:30 Aux= 07:45:30 Message to Camera, serial 109600 queued 07:46:07 Received message from Master: op=PointingHead serial=109613 07:46:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:46:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:46:07 Point started: ret=0 07:46:07 point_skyscan result=0 07:46:08 Check angles 07:46:08 SkyScan query 07:46:08 SkyScan query done: ret=0 az=134.67<-8978 ze=36.375<-9575 Statuses=0009 0009 07:46:08 Msec=0 True Az=134.67 Ze=36.375 Az status=0009 Ze status=0009 07:46:08 Check angles 07:46:08 SkyScan query 07:46:09 SkyScan query done: ret=0 az=117.195<-7813 ze=15.45<-10970 Statuses=0009 0009 07:46:09 Msec=750 True Az=117.195 Ze=15.45 Az status=0009 Ze status=0009 07:46:09 Check angles 07:46:09 SkyScan query 07:46:10 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.535<-12369 Statuses=0009 0009 07:46:10 Msec=1500 True Az=99.795 Ze=-5.535 Az status=0009 Ze status=0009 07:46:10 Check angles 07:46:10 SkyScan query 07:46:10 SkyScan query done: ret=0 az=82.32<-5488 ze=-26.475<-13765 Statuses=0009 0009 07:46:10 Msec=2250 True Az=82.32 Ze=-26.475 Az status=0009 Ze status=0009 07:46:11 Check angles 07:46:11 SkyScan query 07:46:11 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.565<-14571 Statuses=0009 0008 07:46:11 Msec=3000 True Az=64.77 Ze=-38.565 Az status=0009 Ze status=0008 07:46:11 Check angles 07:46:11 SkyScan query 07:46:12 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.535<-14569 Statuses=0009 0008 07:46:12 Msec=3750 True Az=47.325 Ze=-38.535 Az status=0009 Ze status=0008 07:46:12 Check angles 07:46:12 SkyScan query 07:46:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:46:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:46:13 Message to Master queued w/err=0: serial=109613 error=0 07:46:18 Received message from Master: op=Filter serial=109614 07:46:18 Color wheel filter change from 0 to 0 07:46:18 FLIGetFilterPos err=0 currentPosition=0 07:46:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:18 Filter is already there-color wheel unchanged 07:46:18 Received message from Master: op=Shutter serial=109615 07:46:18 Shutter LASER close 07:46:18 Received message from Camera: op=State serial=109617 07:46:18 GetSingleValue result=40 Value=cccccccc 07:46:18 SkyScan query 07:46:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:46:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:19 Parameters OK 07:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:19 Set A/D data flow result=40 07:46:19 Set A/D channel type result=40 07:46:19 Set A/D encoding result=40 07:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:19 Set channel filter=0.000000e+000 result=40 07:46:19 Config A/D Result=40 07:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:19 Get A/D filter: -9.255963e+061 result=40 07:46:19 Get A/D value=-858993460 result=40 07:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:19 Parameters OK 07:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:19 Set A/D data flow result=40 07:46:19 Set A/D channel type result=40 07:46:19 Set A/D encoding result=40 07:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:19 Set channel filter=0.000000e+000 result=40 07:46:19 Config A/D Result=40 07:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:19 Get A/D filter: -9.255963e+061 result=40 07:46:19 Get A/D value=-858993460 result=40 07:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:19 Aux= 07:46:19 Message to Camera, serial 109617 queued 07:46:55 Received message from Master: op=PointingHead serial=109630 07:46:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:46:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:46:56 Point started: ret=0 07:46:56 point_skyscan result=0 07:46:56 Check angles 07:46:56 SkyScan query 07:46:57 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.535<-16569 Statuses=0009 0009 07:46:57 Msec=0 True Az=64.215 Ze=-68.535 Az status=0009 Ze status=0009 07:46:57 Check angles 07:46:57 SkyScan query 07:46:58 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.52<-17968 Statuses=0009 0009 07:46:58 Msec=750 True Az=81.54 Ze=-89.52 Az status=0009 Ze status=0009 07:46:58 Check angles 07:46:58 SkyScan query 07:46:59 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.46<-19364 Statuses=0009 0009 07:46:59 Msec=1500 True Az=99.105 Ze=-110.46 Az status=0009 Ze status=0009 07:46:59 Check angles 07:46:59 SkyScan query 07:46:59 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.4<-20760 Statuses=0009 0009 07:46:59 Msec=2250 True Az=116.64 Ze=-131.4 Az status=0009 Ze status=0009 07:46:59 Check angles 07:46:59 SkyScan query 07:47:00 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 07:47:00 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 07:47:00 Check angles 07:47:00 SkyScan query 07:47:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:47:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:47:01 Message to Master queued w/err=0: serial=109630 error=0 07:47:06 Received message from Master: op=Filter serial=109631 07:47:06 Color wheel filter change from 0 to 0 07:47:06 FLIGetFilterPos err=0 currentPosition=0 07:47:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:06 Filter is already there-color wheel unchanged 07:47:06 Received message from Master: op=Shutter serial=109632 07:47:06 Shutter LASER close 07:47:06 Received message from Camera: op=State serial=109634 07:47:06 GetSingleValue result=40 Value=cccccccc 07:47:06 SkyScan query 07:47:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:47:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:07 Parameters OK 07:47:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:07 Set A/D data flow result=40 07:47:07 Set A/D channel type result=40 07:47:07 Set A/D encoding result=40 07:47:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:07 Set channel filter=0.000000e+000 result=40 07:47:07 Config A/D Result=40 07:47:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:07 Get A/D filter: -9.255963e+061 result=40 07:47:07 Get A/D value=-858993460 result=40 07:47:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:07 Parameters OK 07:47:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:07 Set A/D data flow result=40 07:47:07 Set A/D channel type result=40 07:47:07 Set A/D encoding result=40 07:47:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:07 Set channel filter=0.000000e+000 result=40 07:47:07 Config A/D Result=40 07:47:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:07 Get A/D filter: -9.255963e+061 result=40 07:47:07 Get A/D value=-858993460 result=40 07:47:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:07 Aux= 07:47:07 Message to Camera, serial 109634 queued 07:47:43 Received message from Master: op=PointingHead serial=109647 07:47:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:47:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:47:44 Point started: ret=0 07:47:44 point_skyscan result=0 07:47:45 Check angles 07:47:45 SkyScan query 07:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 07:47:45 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 07:47:45 Check angles 07:47:45 SkyScan query 07:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:47:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:47:46 Message to Master queued w/err=0: serial=109647 error=0 07:47:51 Received message from Master: op=Filter serial=109648 07:47:51 Color wheel filter change from 0 to 0 07:47:51 FLIGetFilterPos err=0 currentPosition=0 07:47:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:51 Filter is already there-color wheel unchanged 07:47:51 Received message from Master: op=Shutter serial=109649 07:47:51 Shutter LASER open 07:47:51 Received message from Camera: op=State serial=109651 07:47:51 GetSingleValue result=40 Value=cccccccc 07:47:51 SkyScan query 07:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:47:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:52 Parameters OK 07:47:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:52 Set A/D data flow result=40 07:47:52 Set A/D channel type result=40 07:47:52 Set A/D encoding result=40 07:47:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:52 Set channel filter=0.000000e+000 result=40 07:47:52 Config A/D Result=40 07:47:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:52 Get A/D filter: -9.255963e+061 result=40 07:47:52 Get A/D value=-858993460 result=40 07:47:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:52 Parameters OK 07:47:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:52 Set A/D data flow result=40 07:47:52 Set A/D channel type result=40 07:47:52 Set A/D encoding result=40 07:47:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:52 Set channel filter=0.000000e+000 result=40 07:47:52 Config A/D Result=40 07:47:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:52 Get A/D filter: -9.255963e+061 result=40 07:47:52 Get A/D value=-858993460 result=40 07:47:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:52 Aux= 07:47:52 Message to Camera, serial 109651 queued 07:48:00 Received message from Master: op=Shutter serial=109661 07:48:00 Shutter LASER close 07:48:01 Received message from Master: op=PointingHead serial=109665 07:48:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:48:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:48:01 Point started: ret=0 07:48:01 point_skyscan result=0 07:48:02 Check angles 07:48:02 SkyScan query 07:48:03 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.1<-21540 Statuses=0009 0009 07:48:03 Msec=0 True Az=136.155 Ze=-143.1 Az status=0009 Ze status=0009 07:48:03 Check angles 07:48:03 SkyScan query 07:48:03 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.085<-20139 Statuses=0009 0009 07:48:03 Msec=750 True Az=153.54 Ze=-122.085 Az status=0009 Ze status=0009 07:48:03 Check angles 07:48:03 SkyScan query 07:48:04 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.22<-18748 Statuses=0009 0009 07:48:04 Msec=1500 True Az=171.06 Ze=-101.22 Az status=0009 Ze status=0009 07:48:04 Check angles 07:48:04 SkyScan query 07:48:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.22<-17348 Statuses=0008 0009 07:48:05 Msec=2250 True Az=176.01 Ze=-80.22 Az status=0008 Ze status=0009 07:48:05 Check angles 07:48:05 SkyScan query 07:48:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.28<-15952 Statuses=0008 0009 07:48:06 Msec=3000 True Az=176.01 Ze=-59.28 Az status=0008 Ze status=0009 07:48:06 Check angles 07:48:06 SkyScan query 07:48:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:48:06 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:48:06 Message to Master queued w/err=0: serial=109665 error=0 07:48:11 Received message from Master: op=Filter serial=109666 07:48:11 Color wheel filter change from 0 to 0 07:48:11 FLIGetFilterPos err=0 currentPosition=0 07:48:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:11 Filter is already there-color wheel unchanged 07:48:11 Received message from Master: op=Shutter serial=109667 07:48:11 Shutter LASER close 07:48:12 Received message from Camera: op=State serial=109669 07:48:12 GetSingleValue result=40 Value=cccccccc 07:48:12 SkyScan query 07:48:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:48:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:12 Parameters OK 07:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:12 Set A/D data flow result=40 07:48:12 Set A/D channel type result=40 07:48:12 Set A/D encoding result=40 07:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:12 Set channel filter=0.000000e+000 result=40 07:48:12 Config A/D Result=40 07:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:12 Get A/D filter: -9.255963e+061 result=40 07:48:12 Get A/D value=-858993460 result=40 07:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:12 Parameters OK 07:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:12 Set A/D data flow result=40 07:48:12 Set A/D channel type result=40 07:48:12 Set A/D encoding result=40 07:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:12 Set channel filter=0.000000e+000 result=40 07:48:12 Config A/D Result=40 07:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:12 Get A/D filter: -9.255963e+061 result=40 07:48:12 Get A/D value=-858993460 result=40 07:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:12 Aux= 07:48:12 Message to Camera, serial 109669 queued 07:48:49 Received message from Master: op=PointingHead serial=109682 07:48:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:48:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:48:49 Point started: ret=0 07:48:49 point_skyscan result=0 07:48:50 Check angles 07:48:50 SkyScan query 07:48:51 SkyScan query done: ret=0 az=153.165<-10211 ze=-22.05<-13470 Statuses=0009 0009 07:48:51 Msec=0 True Az=153.165 Ze=-22.05 Az status=0009 Ze status=0009 07:48:51 Check angles 07:48:51 SkyScan query 07:48:51 SkyScan query done: ret=0 az=135.705<-9047 ze=-1.065<-12071 Statuses=0009 0009 07:48:51 Msec=750 True Az=135.705 Ze=-1.065 Az status=0009 Ze status=0009 07:48:52 Check angles 07:48:52 SkyScan query 07:48:52 SkyScan query done: ret=0 az=118.2<-7880 ze=19.875<-10675 Statuses=0009 0009 07:48:52 Msec=1500 True Az=118.2 Ze=19.875 Az status=0009 Ze status=0009 07:48:52 Check angles 07:48:52 SkyScan query 07:48:53 SkyScan query done: ret=0 az=100.725<-6715 ze=40.83<-9278 Statuses=0009 0009 07:48:53 Msec=2250 True Az=100.725 Ze=40.83 Az status=0009 Ze status=0009 07:48:53 Check angles 07:48:53 SkyScan query 07:48:54 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 07:48:54 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 07:48:54 Check angles 07:48:54 SkyScan query 07:48:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:48:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:48:54 Message to Master queued w/err=0: serial=109682 error=0 07:48:59 Received message from Master: op=Filter serial=109683 07:48:59 Color wheel filter change from 0 to 0 07:48:59 FLIGetFilterPos err=0 currentPosition=0 07:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:59 Filter is already there-color wheel unchanged 07:49:00 Received message from Master: op=Shutter serial=109684 07:49:00 Shutter LASER close 07:49:00 Received message from Camera: op=State serial=109686 07:49:00 GetSingleValue result=40 Value=cccccccc 07:49:00 SkyScan query 07:49:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:49:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:00 Parameters OK 07:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:00 Set A/D data flow result=40 07:49:00 Set A/D channel type result=40 07:49:00 Set A/D encoding result=40 07:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:00 Set channel filter=0.000000e+000 result=40 07:49:00 Config A/D Result=40 07:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:00 Get A/D filter: -9.255963e+061 result=40 07:49:00 Get A/D value=-858993460 result=40 07:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:00 Parameters OK 07:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:00 Set A/D data flow result=40 07:49:00 Set A/D channel type result=40 07:49:00 Set A/D encoding result=40 07:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:00 Set channel filter=0.000000e+000 result=40 07:49:00 Config A/D Result=40 07:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:00 Get A/D filter: -9.255963e+061 result=40 07:49:00 Get A/D value=-858993460 result=40 07:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:00 Aux= 07:49:00 Message to Camera, serial 109686 queued 07:49:37 Received message from Master: op=PointingHead serial=109699 07:49:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:49:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:49:37 Point started: ret=0 07:49:37 point_skyscan result=0 07:49:38 Check angles 07:49:38 SkyScan query 07:49:39 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 07:49:39 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 07:49:39 Check angles 07:49:39 SkyScan query 07:49:40 SkyScan query done: ret=0 az=126.93<-8462 ze=38.505<-9433 Statuses=0009 0008 07:49:40 Msec=750 True Az=126.93 Ze=38.505 Az status=0009 Ze status=0008 07:49:40 Check angles 07:49:40 SkyScan query 07:49:40 SkyScan query done: ret=0 az=144.345<-9623 ze=38.505<-9433 Statuses=0009 0008 07:49:40 Msec=1500 True Az=144.345 Ze=38.505 Az status=0009 Ze status=0008 07:49:40 Check angles 07:49:40 SkyScan query 07:49:41 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 07:49:41 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 07:49:41 Check angles 07:49:41 SkyScan query 07:49:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:49:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:49:42 Check angles 07:49:42 SkyScan query 07:49:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:49:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:49:43 Message to Master queued w/err=0: serial=109699 error=0 07:49:48 Received message from Master: op=Filter serial=109700 07:49:48 Color wheel filter change from 0 to 0 07:49:48 FLIGetFilterPos err=0 currentPosition=0 07:49:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:48 Filter is already there-color wheel unchanged 07:49:48 Received message from Master: op=Shutter serial=109701 07:49:48 Shutter LASER close 07:49:48 Received message from Camera: op=State serial=109703 07:49:48 GetSingleValue result=40 Value=cccccccc 07:49:48 SkyScan query 07:49:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:49:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:48 Parameters OK 07:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:48 Set A/D data flow result=40 07:49:48 Set A/D channel type result=40 07:49:48 Set A/D encoding result=40 07:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:48 Set channel filter=0.000000e+000 result=40 07:49:48 Config A/D Result=40 07:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:48 Get A/D filter: -9.255963e+061 result=40 07:49:48 Get A/D value=-858993460 result=40 07:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:48 Parameters OK 07:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:48 Set A/D data flow result=40 07:49:48 Set A/D channel type result=40 07:49:48 Set A/D encoding result=40 07:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:48 Set channel filter=0.000000e+000 result=40 07:49:48 Config A/D Result=40 07:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:48 Get A/D filter: -9.255963e+061 result=40 07:49:48 Get A/D value=-858993460 result=40 07:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:48 Aux= 07:49:48 Message to Camera, serial 109703 queued 07:50:25 Received message from Master: op=PointingHead serial=109716 07:50:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:50:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:50:25 Point started: ret=0 07:50:25 point_skyscan result=0 07:50:26 Check angles 07:50:26 SkyScan query 07:50:27 SkyScan query done: ret=0 az=152.775<-10185 ze=8.415<-11439 Statuses=0009 0009 07:50:27 Msec=0 True Az=152.775 Ze=8.415 Az status=0009 Ze status=0009 07:50:27 Check angles 07:50:27 SkyScan query 07:50:28 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.495<-12833 Statuses=0009 0009 07:50:28 Msec=750 True Az=135.375 Ze=-12.495 Az status=0009 Ze status=0009 07:50:28 Check angles 07:50:28 SkyScan query 07:50:28 SkyScan query done: ret=0 az=117.42<-7828 ze=-33.915<-14261 Statuses=0009 0009 07:50:28 Msec=1500 True Az=117.42 Ze=-33.915 Az status=0009 Ze status=0009 07:50:28 Check angles 07:50:28 SkyScan query 07:50:29 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.57<-15438 Statuses=0009 0009 07:50:29 Msec=2250 True Az=100.035 Ze=-51.57 Az status=0009 Ze status=0009 07:50:29 Check angles 07:50:29 SkyScan query 07:50:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 07:50:30 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 07:50:30 Check angles 07:50:30 SkyScan query 07:50:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:50:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:50:31 Message to Master queued w/err=0: serial=109716 error=0 07:50:36 Received message from Master: op=Filter serial=109717 07:50:36 Color wheel filter change from 0 to 0 07:50:36 FLIGetFilterPos err=0 currentPosition=0 07:50:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:36 Filter is already there-color wheel unchanged 07:50:36 Received message from Master: op=Shutter serial=109718 07:50:36 Shutter LASER close 07:50:36 Received message from Camera: op=State serial=109720 07:50:36 GetSingleValue result=40 Value=cccccccc 07:50:36 SkyScan query 07:50:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:50:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:36 Parameters OK 07:50:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:36 Set A/D data flow result=40 07:50:36 Set A/D channel type result=40 07:50:36 Set A/D encoding result=40 07:50:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:36 Set channel filter=0.000000e+000 result=40 07:50:36 Config A/D Result=40 07:50:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:36 Get A/D filter: -9.255963e+061 result=40 07:50:36 Get A/D value=-858993460 result=40 07:50:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:36 Parameters OK 07:50:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:36 Set A/D data flow result=40 07:50:36 Set A/D channel type result=40 07:50:36 Set A/D encoding result=40 07:50:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:36 Set channel filter=0.000000e+000 result=40 07:50:36 Config A/D Result=40 07:50:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:36 Get A/D filter: -9.255963e+061 result=40 07:50:36 Get A/D value=-858993460 result=40 07:50:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:36 Aux= 07:50:36 Message to Camera, serial 109720 queued 07:51:13 Received message from Master: op=PointingHead serial=109733 07:51:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:51:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:51:14 Point started: ret=0 07:51:14 point_skyscan result=0 07:51:14 Check angles 07:51:14 SkyScan query 07:51:15 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.69<-17446 Statuses=0009 0009 07:51:15 Msec=0 True Az=109.32 Ze=-81.69 Az status=0009 Ze status=0009 07:51:15 Check angles 07:51:15 SkyScan query 07:51:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 07:51:16 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 07:51:16 Check angles 07:51:16 SkyScan query 07:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 07:51:17 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 07:51:17 Check angles 07:51:17 SkyScan query 07:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 07:51:17 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 07:51:17 Check angles 07:51:17 SkyScan query 07:51:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 07:51:18 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 07:51:18 Check angles 07:51:18 SkyScan query 07:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:51:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:51:19 Message to Master queued w/err=0: serial=109733 error=0 07:51:24 Received message from Master: op=Filter serial=109734 07:51:24 Color wheel filter change from 0 to 0 07:51:24 FLIGetFilterPos err=0 currentPosition=0 07:51:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:24 Filter is already there-color wheel unchanged 07:51:24 Received message from Master: op=Shutter serial=109735 07:51:24 Shutter LASER open 07:51:24 Received message from Camera: op=State serial=109737 07:51:24 GetSingleValue result=40 Value=cccccccc 07:51:24 SkyScan query 07:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:51:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:25 Parameters OK 07:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:25 Set A/D data flow result=40 07:51:25 Set A/D channel type result=40 07:51:25 Set A/D encoding result=40 07:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:25 Set channel filter=0.000000e+000 result=40 07:51:25 Config A/D Result=40 07:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:25 Get A/D filter: -9.255963e+061 result=40 07:51:25 Get A/D value=-858993460 result=40 07:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:25 Parameters OK 07:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:25 Set A/D data flow result=40 07:51:25 Set A/D channel type result=40 07:51:25 Set A/D encoding result=40 07:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:25 Set channel filter=0.000000e+000 result=40 07:51:25 Config A/D Result=40 07:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:25 Get A/D filter: -9.255963e+061 result=40 07:51:25 Get A/D value=-858993460 result=40 07:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:25 Aux= 07:51:25 Message to Camera, serial 109737 queued 07:51:33 Received message from Master: op=Shutter serial=109747 07:51:33 Shutter LASER close 07:51:34 Received message from Master: op=PointingHead serial=109751 07:51:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:51:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:51:34 Point started: ret=0 07:51:34 point_skyscan result=0 07:51:35 Check angles 07:51:35 SkyScan query 07:51:35 SkyScan query done: ret=0 az=90.15<-6010 ze=157.575<-1495 Statuses=0009 0009 07:51:35 Msec=0 True Az=90.15 Ze=157.575 Az status=0009 Ze status=0009 07:51:35 Check angles 07:51:35 SkyScan query 07:51:36 SkyScan query done: ret=0 az=72.3<-4820 ze=136.17<-2922 Statuses=0009 0009 07:51:36 Msec=750 True Az=72.3 Ze=136.17 Az status=0009 Ze status=0009 07:51:36 Check angles 07:51:36 SkyScan query 07:51:37 SkyScan query done: ret=0 az=54.645<-3643 ze=114.765<-4349 Statuses=0009 0009 07:51:37 Msec=1500 True Az=54.645 Ze=114.765 Az status=0009 Ze status=0009 07:51:37 Check angles 07:51:37 SkyScan query 07:51:37 SkyScan query done: ret=0 az=40.905<-2727 ze=93.84<-5744 Statuses=0009 0009 07:51:37 Msec=2250 True Az=40.905 Ze=93.84 Az status=0009 Ze status=0009 07:51:38 Check angles 07:51:38 SkyScan query 07:51:38 SkyScan query done: ret=0 az=40.995<-2733 ze=72.84<-7144 Statuses=0008 0009 07:51:38 Msec=3000 True Az=40.995 Ze=72.84 Az status=0008 Ze status=0009 07:51:38 Check angles 07:51:38 SkyScan query 07:51:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 07:51:39 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 07:51:39 Check angles 07:51:39 SkyScan query 07:51:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:51:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:51:40 Message to Master queued w/err=0: serial=109751 error=0 07:51:45 Received message from Master: op=Filter serial=109752 07:51:45 Color wheel filter change from 0 to 0 07:51:45 FLIGetFilterPos err=0 currentPosition=0 07:51:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:45 Filter is already there-color wheel unchanged 07:51:45 Received message from Master: op=Shutter serial=109753 07:51:45 Shutter LASER close 07:51:45 Received message from Camera: op=State serial=109755 07:51:45 GetSingleValue result=40 Value=cccccccc 07:51:45 SkyScan query 07:51:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:46 Parameters OK 07:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:46 Set A/D data flow result=40 07:51:46 Set A/D channel type result=40 07:51:46 Set A/D encoding result=40 07:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:46 Set channel filter=0.000000e+000 result=40 07:51:46 Config A/D Result=40 07:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:46 Get A/D filter: -9.255963e+061 result=40 07:51:46 Get A/D value=-858993460 result=40 07:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:46 Parameters OK 07:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:46 Set A/D data flow result=40 07:51:46 Set A/D channel type result=40 07:51:46 Set A/D encoding result=40 07:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:46 Set channel filter=0.000000e+000 result=40 07:51:46 Config A/D Result=40 07:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:46 Get A/D filter: -9.255963e+061 result=40 07:51:46 Get A/D value=-858993460 result=40 07:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:46 Aux= 07:51:46 Message to Camera, serial 109755 queued 07:52:22 Received message from Master: op=PointingHead serial=109768 07:52:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:52:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:52:23 Point started: ret=0 07:52:23 point_skyscan result=0 07:52:24 Check angles 07:52:24 SkyScan query 07:52:24 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 07:52:24 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 07:52:24 Check angles 07:52:24 SkyScan query 07:52:25 SkyScan query done: ret=0 az=81.735<-5449 ze=66.51<-7566 Statuses=0009 0008 07:52:25 Msec=750 True Az=81.735 Ze=66.51 Az status=0009 Ze status=0008 07:52:25 Check angles 07:52:25 SkyScan query 07:52:26 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 07:52:26 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 07:52:26 Check angles 07:52:26 SkyScan query 07:52:26 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 07:52:26 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 07:52:27 Check angles 07:52:27 SkyScan query 07:52:27 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 07:52:27 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 07:52:27 Check angles 07:52:27 SkyScan query 07:52:28 SkyScan query done: ret=0 az=152.055<-10137 ze=66.495<-7567 Statuses=0009 0008 07:52:28 Msec=3750 True Az=152.055 Ze=66.495 Az status=0009 Ze status=0008 07:52:28 Check angles 07:52:28 SkyScan query 07:52:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:52:29 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 07:52:29 Message to Master queued w/err=0: serial=109768 error=0 07:52:34 Received message from Master: op=Filter serial=109769 07:52:34 Color wheel filter change from 0 to 0 07:52:34 FLIGetFilterPos err=0 currentPosition=0 07:52:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:34 Filter is already there-color wheel unchanged 07:52:34 Received message from Master: op=Shutter serial=109770 07:52:34 Shutter LASER close 07:52:34 Received message from Camera: op=State serial=109772 07:52:34 GetSingleValue result=40 Value=cccccccc 07:52:34 SkyScan query 07:52:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:52:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:35 Parameters OK 07:52:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:35 Set A/D data flow result=40 07:52:35 Set A/D channel type result=40 07:52:35 Set A/D encoding result=40 07:52:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:35 Set channel filter=0.000000e+000 result=40 07:52:35 Config A/D Result=40 07:52:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:35 Get A/D filter: -9.255963e+061 result=40 07:52:35 Get A/D value=-858993460 result=40 07:52:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:35 Parameters OK 07:52:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:35 Set A/D data flow result=40 07:52:35 Set A/D channel type result=40 07:52:35 Set A/D encoding result=40 07:52:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:35 Set channel filter=0.000000e+000 result=40 07:52:35 Config A/D Result=40 07:52:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:35 Get A/D filter: -9.255963e+061 result=40 07:52:35 Get A/D value=-858993460 result=40 07:52:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:35 Aux= 07:52:35 Message to Camera, serial 109772 queued 07:53:11 Received message from Master: op=PointingHead serial=109785 07:53:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:53:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:53:12 Point started: ret=0 07:53:12 point_skyscan result=0 07:53:12 Check angles 07:53:12 SkyScan query 07:53:13 SkyScan query done: ret=0 az=135.195<-9013 ze=36.87<-9542 Statuses=0009 0009 07:53:13 Msec=0 True Az=135.195 Ze=36.87 Az status=0009 Ze status=0009 07:53:13 Check angles 07:53:13 SkyScan query 07:53:14 SkyScan query done: ret=0 az=117.675<-7845 ze=15.915<-10939 Statuses=0009 0009 07:53:14 Msec=750 True Az=117.675 Ze=15.915 Az status=0009 Ze status=0009 07:53:14 Check angles 07:53:14 SkyScan query 07:53:15 SkyScan query done: ret=0 az=100.29<-6686 ze=-5.04<-12336 Statuses=0009 0009 07:53:15 Msec=1500 True Az=100.29 Ze=-5.04 Az status=0009 Ze status=0009 07:53:15 Check angles 07:53:15 SkyScan query 07:53:15 SkyScan query done: ret=0 az=82.785<-5519 ze=-25.995<-13733 Statuses=0009 0009 07:53:15 Msec=2250 True Az=82.785 Ze=-25.995 Az status=0009 Ze status=0009 07:53:15 Check angles 07:53:15 SkyScan query 07:53:16 SkyScan query done: ret=0 az=65.325<-4355 ze=-38.565<-14571 Statuses=0009 0008 07:53:16 Msec=3000 True Az=65.325 Ze=-38.565 Az status=0009 Ze status=0008 07:53:16 Check angles 07:53:16 SkyScan query 07:53:17 SkyScan query done: ret=0 az=47.85<-3190 ze=-38.535<-14569 Statuses=0009 0008 07:53:17 Msec=3750 True Az=47.85 Ze=-38.535 Az status=0009 Ze status=0008 07:53:17 Check angles 07:53:17 SkyScan query 07:53:18 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 07:53:18 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 07:53:18 Message to Master queued w/err=0: serial=109785 error=0 07:53:23 Received message from Master: op=Filter serial=109786 07:53:23 Color wheel filter change from 0 to 0 07:53:23 FLIGetFilterPos err=0 currentPosition=0 07:53:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:23 Filter is already there-color wheel unchanged 07:53:23 Received message from Master: op=Shutter serial=109787 07:53:23 Shutter LASER close 07:53:23 Received message from Camera: op=State serial=109789 07:53:23 GetSingleValue result=40 Value=cccccccc 07:53:23 SkyScan query 07:53:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:53:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:23 Parameters OK 07:53:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:23 Set A/D data flow result=40 07:53:23 Set A/D channel type result=40 07:53:23 Set A/D encoding result=40 07:53:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:23 Set channel filter=0.000000e+000 result=40 07:53:23 Config A/D Result=40 07:53:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:23 Get A/D filter: -9.255963e+061 result=40 07:53:23 Get A/D value=-858993460 result=40 07:53:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:23 Parameters OK 07:53:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:23 Set A/D data flow result=40 07:53:23 Set A/D channel type result=40 07:53:23 Set A/D encoding result=40 07:53:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:23 Set channel filter=0.000000e+000 result=40 07:53:23 Config A/D Result=40 07:53:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:23 Get A/D filter: -9.255963e+061 result=40 07:53:23 Get A/D value=-858993460 result=40 07:53:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:23 Aux= 07:53:23 Message to Camera, serial 109789 queued 07:54:00 Received message from Master: op=PointingHead serial=109802 07:54:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:54:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:54:01 Point started: ret=0 07:54:01 point_skyscan result=0 07:54:01 Check angles 07:54:01 SkyScan query 07:54:02 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.385<-16559 Statuses=0009 0009 07:54:02 Msec=0 True Az=64.08 Ze=-68.385 Az status=0009 Ze status=0009 07:54:02 Check angles 07:54:02 SkyScan query 07:54:03 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.4<-17960 Statuses=0009 0009 07:54:03 Msec=750 True Az=81.54 Ze=-89.4 Az status=0009 Ze status=0009 07:54:03 Check angles 07:54:03 SkyScan query 07:54:03 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.34<-19356 Statuses=0009 0009 07:54:03 Msec=1500 True Az=99.09 Ze=-110.34 Az status=0009 Ze status=0009 07:54:04 Check angles 07:54:04 SkyScan query 07:54:04 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.295<-20753 Statuses=0009 0009 07:54:04 Msec=2250 True Az=116.625 Ze=-131.295 Az status=0009 Ze status=0009 07:54:04 Check angles 07:54:04 SkyScan query 07:54:05 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 07:54:05 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 07:54:05 Check angles 07:54:05 SkyScan query 07:54:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:54:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:54:06 Message to Master queued w/err=0: serial=109802 error=0 07:54:11 Received message from Master: op=Filter serial=109803 07:54:11 Color wheel filter change from 0 to 0 07:54:11 FLIGetFilterPos err=0 currentPosition=0 07:54:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:11 Filter is already there-color wheel unchanged 07:54:11 Received message from Master: op=Shutter serial=109804 07:54:11 Shutter LASER close 07:54:11 Received message from Camera: op=State serial=109806 07:54:11 GetSingleValue result=40 Value=cccccccc 07:54:11 SkyScan query 07:54:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:54:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:11 Parameters OK 07:54:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:11 Set A/D data flow result=40 07:54:11 Set A/D channel type result=40 07:54:11 Set A/D encoding result=40 07:54:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:11 Set channel filter=0.000000e+000 result=40 07:54:11 Config A/D Result=40 07:54:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:11 Get A/D filter: -9.255963e+061 result=40 07:54:11 Get A/D value=-858993460 result=40 07:54:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:11 Parameters OK 07:54:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:11 Set A/D data flow result=40 07:54:11 Set A/D channel type result=40 07:54:11 Set A/D encoding result=40 07:54:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:11 Set channel filter=0.000000e+000 result=40 07:54:11 Config A/D Result=40 07:54:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:11 Get A/D filter: -9.255963e+061 result=40 07:54:11 Get A/D value=-858993460 result=40 07:54:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:11 Aux= 07:54:11 Message to Camera, serial 109806 queued 07:54:48 Received message from Master: op=PointingHead serial=109819 07:54:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:54:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:54:49 Point started: ret=0 07:54:49 point_skyscan result=0 07:54:49 Check angles 07:54:49 SkyScan query 07:54:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 07:54:50 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 07:54:50 Check angles 07:54:50 SkyScan query 07:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:54:51 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:54:51 Message to Master queued w/err=0: serial=109819 error=0 07:54:56 Received message from Master: op=Filter serial=109820 07:54:56 Color wheel filter change from 0 to 0 07:54:56 FLIGetFilterPos err=0 currentPosition=0 07:54:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:56 Filter is already there-color wheel unchanged 07:54:56 Received message from Master: op=Shutter serial=109821 07:54:56 Shutter LASER open 07:54:56 Received message from Camera: op=State serial=109823 07:54:56 GetSingleValue result=40 Value=cccccccc 07:54:56 SkyScan query 07:54:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:54:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:57 Parameters OK 07:54:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:57 Set A/D data flow result=40 07:54:57 Set A/D channel type result=40 07:54:57 Set A/D encoding result=40 07:54:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:57 Set channel filter=0.000000e+000 result=40 07:54:57 Config A/D Result=40 07:54:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:57 Get A/D filter: -9.255963e+061 result=40 07:54:57 Get A/D value=-858993460 result=40 07:54:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:57 Parameters OK 07:54:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:57 Set A/D data flow result=40 07:54:57 Set A/D channel type result=40 07:54:57 Set A/D encoding result=40 07:54:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:57 Set channel filter=0.000000e+000 result=40 07:54:57 Config A/D Result=40 07:54:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:57 Get A/D filter: -9.255963e+061 result=40 07:54:57 Get A/D value=-858993460 result=40 07:54:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:57 Aux= 07:54:57 Message to Camera, serial 109823 queued 07:55:05 Received message from Master: op=Shutter serial=109833 07:55:05 Shutter LASER close 07:55:06 Received message from Master: op=PointingHead serial=109837 07:55:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:55:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:55:06 Point started: ret=0 07:55:06 point_skyscan result=0 07:55:07 Check angles 07:55:07 SkyScan query 07:55:07 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.22<-21548 Statuses=0009 0009 07:55:07 Msec=0 True Az=135.975 Ze=-143.22 Az status=0009 Ze status=0009 07:55:08 Check angles 07:55:08 SkyScan query 07:55:08 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.265<-20151 Statuses=0009 0009 07:55:08 Msec=750 True Az=153.525 Ze=-122.265 Az status=0009 Ze status=0009 07:55:08 Check angles 07:55:08 SkyScan query 07:55:09 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.845<-18723 Statuses=0009 0009 07:55:09 Msec=1500 True Az=171.42 Ze=-100.845 Az status=0009 Ze status=0009 07:55:09 Check angles 07:55:09 SkyScan query 07:55:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.935<-17329 Statuses=0008 0009 07:55:10 Msec=2250 True Az=176.01 Ze=-79.935 Az status=0008 Ze status=0009 07:55:10 Check angles 07:55:10 SkyScan query 07:55:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.965<-15931 Statuses=0008 0009 07:55:10 Msec=3000 True Az=176.01 Ze=-58.965 Az status=0008 Ze status=0009 07:55:11 Check angles 07:55:11 SkyScan query 07:55:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:55:11 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:55:11 Message to Master queued w/err=0: serial=109837 error=0 07:55:16 Received message from Master: op=Filter serial=109838 07:55:16 Color wheel filter change from 0 to 0 07:55:16 FLIGetFilterPos err=0 currentPosition=0 07:55:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:16 Filter is already there-color wheel unchanged 07:55:16 Received message from Master: op=Shutter serial=109839 07:55:16 Shutter LASER close 07:55:17 Received message from Camera: op=State serial=109841 07:55:17 GetSingleValue result=40 Value=cccccccc 07:55:17 SkyScan query 07:55:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:55:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:17 Parameters OK 07:55:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:17 Set A/D data flow result=40 07:55:17 Set A/D channel type result=40 07:55:17 Set A/D encoding result=40 07:55:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:17 Set channel filter=0.000000e+000 result=40 07:55:17 Config A/D Result=40 07:55:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:17 Get A/D filter: -9.255963e+061 result=40 07:55:17 Get A/D value=-858993460 result=40 07:55:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:17 Parameters OK 07:55:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:17 Set A/D data flow result=40 07:55:17 Set A/D channel type result=40 07:55:17 Set A/D encoding result=40 07:55:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:17 Set channel filter=0.000000e+000 result=40 07:55:17 Config A/D Result=40 07:55:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:17 Get A/D filter: -9.255963e+061 result=40 07:55:17 Get A/D value=-858993460 result=40 07:55:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:17 Aux= 07:55:17 Message to Camera, serial 109841 queued [UTC 2018-12-13 07:55:52] 07:55:54 Received message from Master: op=PointingHead serial=109854 07:55:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:55:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:55:54 Point started: ret=0 07:55:54 point_skyscan result=0 07:55:55 Check angles 07:55:55 SkyScan query 07:55:56 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.3<-13420 Statuses=0009 0009 07:55:56 Msec=0 True Az=152.76 Ze=-21.3 Az status=0009 Ze status=0009 07:55:56 Check angles 07:55:56 SkyScan query 07:55:56 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.765<-12051 Statuses=0009 0009 07:55:56 Msec=750 True Az=135.405 Ze=-0.765 Az status=0009 Ze status=0009 07:55:57 Check angles 07:55:57 SkyScan query 07:55:57 SkyScan query done: ret=0 az=117.78<-7852 ze=20.16<-10656 Statuses=0009 0009 07:55:57 Msec=1500 True Az=117.78 Ze=20.16 Az status=0009 Ze status=0009 07:55:57 Check angles 07:55:57 SkyScan query 07:55:58 SkyScan query done: ret=0 az=100.425<-6695 ze=41.16<-9256 Statuses=0009 0009 07:55:58 Msec=2250 True Az=100.425 Ze=41.16 Az status=0009 Ze status=0009 07:55:58 Check angles 07:55:58 SkyScan query 07:55:59 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 07:55:59 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 07:55:59 Check angles 07:55:59 SkyScan query 07:55:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:55:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:55:59 Message to Master queued w/err=0: serial=109854 error=0 07:56:04 Received message from Master: op=Filter serial=109855 07:56:04 Color wheel filter change from 0 to 0 07:56:04 FLIGetFilterPos err=0 currentPosition=0 07:56:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:04 Filter is already there-color wheel unchanged 07:56:05 Received message from Master: op=Shutter serial=109856 07:56:05 Shutter LASER close 07:56:05 Received message from Camera: op=State serial=109858 07:56:05 GetSingleValue result=40 Value=cccccccc 07:56:05 SkyScan query 07:56:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:56:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:05 Parameters OK 07:56:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:05 Set A/D data flow result=40 07:56:05 Set A/D channel type result=40 07:56:05 Set A/D encoding result=40 07:56:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:05 Set channel filter=0.000000e+000 result=40 07:56:05 Config A/D Result=40 07:56:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:05 Get A/D filter: -9.255963e+061 result=40 07:56:05 Get A/D value=-858993460 result=40 07:56:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:05 Parameters OK 07:56:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:05 Set A/D data flow result=40 07:56:05 Set A/D channel type result=40 07:56:05 Set A/D encoding result=40 07:56:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:05 Set channel filter=0.000000e+000 result=40 07:56:05 Config A/D Result=40 07:56:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:05 Get A/D filter: -9.255963e+061 result=40 07:56:05 Get A/D value=-858993460 result=40 07:56:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:05 Aux= 07:56:05 Message to Camera, serial 109858 queued 07:56:42 Received message from Master: op=PointingHead serial=109871 07:56:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:56:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:56:42 Point started: ret=0 07:56:42 point_skyscan result=0 07:56:43 Check angles 07:56:43 SkyScan query 07:56:44 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 07:56:44 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 07:56:44 Check angles 07:56:44 SkyScan query 07:56:44 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 07:56:44 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 07:56:45 Check angles 07:56:45 SkyScan query 07:56:45 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 07:56:45 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 07:56:45 Check angles 07:56:45 SkyScan query 07:56:46 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 07:56:46 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 07:56:46 Check angles 07:56:46 SkyScan query 07:56:47 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:56:47 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:56:47 Check angles 07:56:47 SkyScan query 07:56:47 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0008 0008 07:56:47 Msec=3750 True Az=176.025 Ze=38.505 Az status=0008 Ze status=0008 07:56:47 Message to Master queued w/err=0: serial=109871 error=0 07:56:52 Received message from Master: op=Filter serial=109872 07:56:52 Color wheel filter change from 0 to 0 07:56:52 FLIGetFilterPos err=0 currentPosition=0 07:56:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:52 Filter is already there-color wheel unchanged 07:56:53 Received message from Master: op=Shutter serial=109873 07:56:53 Shutter LASER close 07:56:53 Received message from Camera: op=State serial=109875 07:56:53 GetSingleValue result=40 Value=cccccccc 07:56:53 SkyScan query 07:56:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:56:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:53 Parameters OK 07:56:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:53 Set A/D data flow result=40 07:56:53 Set A/D channel type result=40 07:56:53 Set A/D encoding result=40 07:56:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:53 Set channel filter=0.000000e+000 result=40 07:56:53 Config A/D Result=40 07:56:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:53 Get A/D filter: -9.255963e+061 result=40 07:56:53 Get A/D value=-858993460 result=40 07:56:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:53 Parameters OK 07:56:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:53 Set A/D data flow result=40 07:56:53 Set A/D channel type result=40 07:56:53 Set A/D encoding result=40 07:56:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:53 Set channel filter=0.000000e+000 result=40 07:56:53 Config A/D Result=40 07:56:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:53 Get A/D filter: -9.255963e+061 result=40 07:56:53 Get A/D value=-858993460 result=40 07:56:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:53 Aux= 07:56:53 Message to Camera, serial 109875 queued 07:57:30 Received message from Master: op=PointingHead serial=109888 07:57:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:57:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:57:30 Point started: ret=0 07:57:30 point_skyscan result=0 07:57:31 Check angles 07:57:31 SkyScan query 07:57:32 SkyScan query done: ret=0 az=153.285<-10219 ze=8.97<-11402 Statuses=0009 0009 07:57:32 Msec=0 True Az=153.285 Ze=8.97 Az status=0009 Ze status=0009 07:57:32 Check angles 07:57:32 SkyScan query 07:57:33 SkyScan query done: ret=0 az=135.84<-9056 ze=-12<-12800 Statuses=0009 0009 07:57:33 Msec=750 True Az=135.84 Ze=-12 Az status=0009 Ze status=0009 07:57:33 Check angles 07:57:33 SkyScan query 07:57:33 SkyScan query done: ret=0 az=118.17<-7878 ze=-32.94<-14196 Statuses=0009 0009 07:57:33 Msec=1500 True Az=118.17 Ze=-32.94 Az status=0009 Ze status=0009 07:57:33 Check angles 07:57:33 SkyScan query 07:57:34 SkyScan query done: ret=0 az=100.785<-6719 ze=-51.495<-15433 Statuses=0009 0009 07:57:34 Msec=2250 True Az=100.785 Ze=-51.495 Az status=0009 Ze status=0009 07:57:34 Check angles 07:57:34 SkyScan query 07:57:35 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:57:35 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:57:35 Check angles 07:57:35 SkyScan query 07:57:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:57:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:57:36 Message to Master queued w/err=0: serial=109888 error=0 07:57:41 Received message from Master: op=Filter serial=109889 07:57:41 Color wheel filter change from 0 to 0 07:57:41 FLIGetFilterPos err=0 currentPosition=0 07:57:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:41 Filter is already there-color wheel unchanged 07:57:41 Received message from Master: op=Shutter serial=109890 07:57:41 Shutter LASER close 07:57:41 Received message from Camera: op=State serial=109892 07:57:41 GetSingleValue result=40 Value=cccccccc 07:57:41 SkyScan query 07:57:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:57:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:41 Parameters OK 07:57:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:41 Set A/D data flow result=40 07:57:41 Set A/D channel type result=40 07:57:41 Set A/D encoding result=40 07:57:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:41 Set channel filter=0.000000e+000 result=40 07:57:41 Config A/D Result=40 07:57:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:41 Get A/D filter: -9.255963e+061 result=40 07:57:41 Get A/D value=-858993460 result=40 07:57:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:41 Parameters OK 07:57:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:41 Set A/D data flow result=40 07:57:41 Set A/D channel type result=40 07:57:41 Set A/D encoding result=40 07:57:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:41 Set channel filter=0.000000e+000 result=40 07:57:41 Config A/D Result=40 07:57:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:41 Get A/D filter: -9.255963e+061 result=40 07:57:41 Get A/D value=-858993460 result=40 07:57:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:41 Aux= 07:57:41 Message to Camera, serial 109892 queued 07:58:18 Received message from Master: op=PointingHead serial=109905 07:58:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:58:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:58:18 Point started: ret=0 07:58:18 point_skyscan result=0 07:58:19 Check angles 07:58:19 SkyScan query 07:58:20 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.105<-17407 Statuses=0009 0009 07:58:20 Msec=0 True Az=108.78 Ze=-81.105 Az status=0009 Ze status=0009 07:58:20 Check angles 07:58:20 SkyScan query 07:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 07:58:21 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 07:58:21 Check angles 07:58:21 SkyScan query 07:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.005<-20267 Statuses=0008 0009 07:58:21 Msec=1500 True Az=112.995 Ze=-124.005 Az status=0008 Ze status=0009 07:58:22 Check angles 07:58:22 SkyScan query 07:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.855<-21657 Statuses=0008 0009 07:58:22 Msec=2250 True Az=112.995 Ze=-144.855 Az status=0008 Ze status=0009 07:58:22 Check angles 07:58:22 SkyScan query 07:58:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.23<-23082 Statuses=0008 0009 07:58:23 Msec=3000 True Az=112.995 Ze=-166.23 Az status=0008 Ze status=0009 07:58:23 Check angles 07:58:23 SkyScan query 07:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:58:24 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:58:24 Message to Master queued w/err=0: serial=109905 error=0 07:58:29 Received message from Master: op=Filter serial=109906 07:58:29 Color wheel filter change from 0 to 0 07:58:29 FLIGetFilterPos err=0 currentPosition=0 07:58:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:29 Filter is already there-color wheel unchanged 07:58:29 Received message from Master: op=Shutter serial=109907 07:58:29 Shutter LASER open 07:58:29 Received message from Camera: op=State serial=109909 07:58:29 GetSingleValue result=40 Value=cccccccc 07:58:29 SkyScan query 07:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:58:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:30 Parameters OK 07:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:30 Set A/D data flow result=40 07:58:30 Set A/D channel type result=40 07:58:30 Set A/D encoding result=40 07:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:30 Set channel filter=0.000000e+000 result=40 07:58:30 Config A/D Result=40 07:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:30 Get A/D filter: -9.255963e+061 result=40 07:58:30 Get A/D value=-858993460 result=40 07:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:30 Parameters OK 07:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:30 Set A/D data flow result=40 07:58:30 Set A/D channel type result=40 07:58:30 Set A/D encoding result=40 07:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:30 Set channel filter=0.000000e+000 result=40 07:58:30 Config A/D Result=40 07:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:30 Get A/D filter: -9.255963e+061 result=40 07:58:30 Get A/D value=-858993460 result=40 07:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:30 Aux= 07:58:30 Message to Camera, serial 109909 queued 07:58:38 Received message from Master: op=Shutter serial=109919 07:58:38 Shutter LASER close 07:58:38 Received message from Master: op=PointingHead serial=109923 07:58:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:58:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:58:39 Point started: ret=0 07:58:39 point_skyscan result=0 07:58:40 Check angles 07:58:40 SkyScan query 07:58:40 SkyScan query done: ret=0 az=89.865<-5991 ze=157.335<-1511 Statuses=0009 0009 07:58:40 Msec=0 True Az=89.865 Ze=157.335 Az status=0009 Ze status=0009 07:58:40 Check angles 07:58:40 SkyScan query 07:58:41 SkyScan query done: ret=0 az=72.48<-4832 ze=136.35<-2910 Statuses=0009 0009 07:58:41 Msec=750 True Az=72.48 Ze=136.35 Az status=0009 Ze status=0009 07:58:41 Check angles 07:58:41 SkyScan query 07:58:42 SkyScan query done: ret=0 az=54.78<-3652 ze=114.99<-4334 Statuses=0009 0009 07:58:42 Msec=1500 True Az=54.78 Ze=114.99 Az status=0009 Ze status=0009 07:58:42 Check angles 07:58:42 SkyScan query 07:58:42 SkyScan query done: ret=0 az=40.89<-2726 ze=93.84<-5744 Statuses=0009 0009 07:58:42 Msec=2250 True Az=40.89 Ze=93.84 Az status=0009 Ze status=0009 07:58:43 Check angles 07:58:43 SkyScan query 07:58:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.035<-7131 Statuses=0008 0009 07:58:43 Msec=3000 True Az=40.995 Ze=73.035 Az status=0008 Ze status=0009 07:58:43 Check angles 07:58:43 SkyScan query 07:58:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 07:58:44 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 07:58:44 Check angles 07:58:44 SkyScan query 07:58:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:58:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:58:45 Message to Master queued w/err=0: serial=109923 error=0 07:58:50 Received message from Master: op=Filter serial=109924 07:58:50 Color wheel filter change from 0 to 0 07:58:50 FLIGetFilterPos err=0 currentPosition=0 07:58:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:50 Filter is already there-color wheel unchanged 07:58:50 Received message from Master: op=Shutter serial=109925 07:58:50 Shutter LASER close 07:58:50 Received message from Camera: op=State serial=109927 07:58:50 GetSingleValue result=40 Value=cccccccc 07:58:50 SkyScan query 07:58:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:58:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:51 Parameters OK 07:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:51 Set A/D data flow result=40 07:58:51 Set A/D channel type result=40 07:58:51 Set A/D encoding result=40 07:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:51 Set channel filter=0.000000e+000 result=40 07:58:51 Config A/D Result=40 07:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:51 Get A/D filter: -9.255963e+061 result=40 07:58:51 Get A/D value=-858993460 result=40 07:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:51 Parameters OK 07:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:51 Set A/D data flow result=40 07:58:51 Set A/D channel type result=40 07:58:51 Set A/D encoding result=40 07:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:51 Set channel filter=0.000000e+000 result=40 07:58:51 Config A/D Result=40 07:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:51 Get A/D filter: -9.255963e+061 result=40 07:58:51 Get A/D value=-858993460 result=40 07:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:51 Aux= 07:58:51 Message to Camera, serial 109927 queued 07:59:27 Received message from Master: op=PointingHead serial=109940 07:59:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:59:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:59:28 Point started: ret=0 07:59:28 point_skyscan result=0 07:59:28 Check angles 07:59:28 SkyScan query 07:59:29 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 07:59:29 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 07:59:29 Check angles 07:59:29 SkyScan query 07:59:30 SkyScan query done: ret=0 az=81.375<-5425 ze=66.495<-7567 Statuses=0009 0008 07:59:30 Msec=750 True Az=81.375 Ze=66.495 Az status=0009 Ze status=0008 07:59:30 Check angles 07:59:30 SkyScan query 07:59:31 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 07:59:31 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 07:59:31 Check angles 07:59:31 SkyScan query 07:59:31 SkyScan query done: ret=0 az=116.67<-7778 ze=66.495<-7567 Statuses=0009 0008 07:59:31 Msec=2250 True Az=116.67 Ze=66.495 Az status=0009 Ze status=0008 07:59:31 Check angles 07:59:31 SkyScan query 07:59:32 SkyScan query done: ret=0 az=134.16<-8944 ze=66.495<-7567 Statuses=0009 0008 07:59:32 Msec=3000 True Az=134.16 Ze=66.495 Az status=0009 Ze status=0008 07:59:32 Check angles 07:59:32 SkyScan query 07:59:33 SkyScan query done: ret=0 az=151.455<-10097 ze=66.495<-7567 Statuses=0009 0008 07:59:33 Msec=3750 True Az=151.455 Ze=66.495 Az status=0009 Ze status=0008 07:59:33 Check angles 07:59:33 SkyScan query 07:59:34 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 07:59:34 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 07:59:34 Message to Master queued w/err=0: serial=109940 error=0 07:59:39 Received message from Master: op=Filter serial=109941 07:59:39 Color wheel filter change from 0 to 0 07:59:39 FLIGetFilterPos err=0 currentPosition=0 07:59:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:39 Filter is already there-color wheel unchanged 07:59:39 Received message from Master: op=Shutter serial=109942 07:59:39 Shutter LASER close 07:59:39 Received message from Camera: op=State serial=109944 07:59:39 GetSingleValue result=40 Value=cccccccc 07:59:39 SkyScan query 07:59:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:59:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:39 Parameters OK 07:59:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:39 Set A/D data flow result=40 07:59:39 Set A/D channel type result=40 07:59:39 Set A/D encoding result=40 07:59:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:39 Set channel filter=0.000000e+000 result=40 07:59:39 Config A/D Result=40 07:59:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:39 Get A/D filter: -9.255963e+061 result=40 07:59:39 Get A/D value=-858993460 result=40 07:59:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:39 Parameters OK 07:59:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:39 Set A/D data flow result=40 07:59:39 Set A/D channel type result=40 07:59:39 Set A/D encoding result=40 07:59:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:39 Set channel filter=0.000000e+000 result=40 07:59:39 Config A/D Result=40 07:59:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:39 Get A/D filter: -9.255963e+061 result=40 07:59:39 Get A/D value=-858993460 result=40 07:59:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:39 Aux= 07:59:39 Message to Camera, serial 109944 queued 08:00:15 Received message from Master: op=PointingHead serial=109956 08:00:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:00:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:00:16 Point started: ret=0 08:00:16 point_skyscan result=0 08:00:16 Check angles 08:00:16 SkyScan query 08:00:17 SkyScan query done: ret=0 az=134.895<-8993 ze=36.735<-9551 Statuses=0009 0009 08:00:17 Msec=0 True Az=134.895 Ze=36.735 Az status=0009 Ze status=0009 08:00:17 Check angles 08:00:17 SkyScan query 08:00:18 SkyScan query done: ret=0 az=117.525<-7835 ze=15.81<-10946 Statuses=0009 0009 08:00:18 Msec=750 True Az=117.525 Ze=15.81 Az status=0009 Ze status=0009 08:00:18 Check angles 08:00:18 SkyScan query 08:00:18 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.175<-12345 Statuses=0009 0009 08:00:18 Msec=1500 True Az=100.14 Ze=-5.175 Az status=0009 Ze status=0009 08:00:19 Check angles 08:00:19 SkyScan query 08:00:19 SkyScan query done: ret=0 az=82.515<-5501 ze=-26.115<-13741 Statuses=0009 0009 08:00:19 Msec=2250 True Az=82.515 Ze=-26.115 Az status=0009 Ze status=0009 08:00:19 Check angles 08:00:19 SkyScan query 08:00:20 SkyScan query done: ret=0 az=65.16<-4344 ze=-38.565<-14571 Statuses=0009 0008 08:00:20 Msec=3000 True Az=65.16 Ze=-38.565 Az status=0009 Ze status=0008 08:00:20 Check angles 08:00:20 SkyScan query 08:00:21 SkyScan query done: ret=0 az=47.73<-3182 ze=-38.535<-14569 Statuses=0009 0008 08:00:21 Msec=3750 True Az=47.73 Ze=-38.535 Az status=0009 Ze status=0008 08:00:21 Check angles 08:00:21 SkyScan query 08:00:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:00:21 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:00:21 Message to Master queued w/err=0: serial=109956 error=0 08:00:26 Received message from Master: op=Filter serial=109957 08:00:26 Color wheel filter change from 0 to 0 08:00:26 FLIGetFilterPos err=0 currentPosition=0 08:00:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:26 Filter is already there-color wheel unchanged 08:00:27 Received message from Master: op=Shutter serial=109958 08:00:27 Shutter LASER close 08:00:27 Received message from Camera: op=State serial=109960 08:00:27 GetSingleValue result=40 Value=cccccccc 08:00:27 SkyScan query 08:00:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:00:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:27 Parameters OK 08:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:27 Set A/D data flow result=40 08:00:27 Set A/D channel type result=40 08:00:27 Set A/D encoding result=40 08:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:27 Set channel filter=0.000000e+000 result=40 08:00:27 Config A/D Result=40 08:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:27 Get A/D filter: -9.255963e+061 result=40 08:00:27 Get A/D value=-858993460 result=40 08:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:27 Parameters OK 08:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:27 Set A/D data flow result=40 08:00:27 Set A/D channel type result=40 08:00:27 Set A/D encoding result=40 08:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:27 Set channel filter=0.000000e+000 result=40 08:00:27 Config A/D Result=40 08:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:27 Get A/D filter: -9.255963e+061 result=40 08:00:27 Get A/D value=-858993460 result=40 08:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:27 Aux= 08:00:27 Message to Camera, serial 109960 queued 08:01:04 Received message from Master: op=PointingHead serial=109973 08:01:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:01:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:01:04 Point started: ret=0 08:01:04 point_skyscan result=0 08:01:05 Check angles 08:01:05 SkyScan query 08:01:06 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.775<-16585 Statuses=0009 0009 08:01:06 Msec=0 True Az=64.38 Ze=-68.775 Az status=0009 Ze status=0009 08:01:06 Check angles 08:01:06 SkyScan query 08:01:07 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.76<-17984 Statuses=0009 0009 08:01:07 Msec=750 True Az=81.765 Ze=-89.76 Az status=0009 Ze status=0009 08:01:07 Check angles 08:01:07 SkyScan query 08:01:07 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.715<-19381 Statuses=0009 0009 08:01:07 Msec=1500 True Az=99.375 Ze=-110.715 Az status=0009 Ze status=0009 08:01:07 Check angles 08:01:07 SkyScan query 08:01:08 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.625<-20775 Statuses=0009 0009 08:01:08 Msec=2250 True Az=116.895 Ze=-131.625 Az status=0009 Ze status=0009 08:01:08 Check angles 08:01:08 SkyScan query 08:01:09 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 08:01:09 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 08:01:09 Check angles 08:01:09 SkyScan query 08:01:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:01:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:01:10 Message to Master queued w/err=0: serial=109973 error=0 08:01:15 Received message from Master: op=Filter serial=109974 08:01:15 Color wheel filter change from 0 to 0 08:01:15 FLIGetFilterPos err=0 currentPosition=0 08:01:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:15 Filter is already there-color wheel unchanged 08:01:15 Received message from Master: op=Shutter serial=109975 08:01:15 Shutter LASER close 08:01:15 Received message from Camera: op=State serial=109977 08:01:15 GetSingleValue result=40 Value=cccccccc 08:01:15 SkyScan query 08:01:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:01:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:15 Parameters OK 08:01:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:15 Set A/D data flow result=40 08:01:15 Set A/D channel type result=40 08:01:15 Set A/D encoding result=40 08:01:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:15 Set channel filter=0.000000e+000 result=40 08:01:15 Config A/D Result=40 08:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:15 Get A/D filter: -9.255963e+061 result=40 08:01:15 Get A/D value=-858993460 result=40 08:01:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:15 Parameters OK 08:01:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:15 Set A/D data flow result=40 08:01:15 Set A/D channel type result=40 08:01:15 Set A/D encoding result=40 08:01:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:15 Set channel filter=0.000000e+000 result=40 08:01:15 Config A/D Result=40 08:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:15 Get A/D filter: -9.255963e+061 result=40 08:01:15 Get A/D value=-858993460 result=40 08:01:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:15 Aux= 08:01:15 Message to Camera, serial 109977 queued 08:01:52 Received message from Master: op=PointingHead serial=109990 08:01:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:01:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:01:52 Point started: ret=0 08:01:52 point_skyscan result=0 08:01:53 Check angles 08:01:53 SkyScan query 08:01:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 08:01:54 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 08:01:54 Check angles 08:01:54 SkyScan query 08:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:01:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:01:55 Message to Master queued w/err=0: serial=109990 error=0 08:02:00 Received message from Master: op=Filter serial=109991 08:02:00 Color wheel filter change from 0 to 0 08:02:00 FLIGetFilterPos err=0 currentPosition=0 08:02:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:00 Filter is already there-color wheel unchanged 08:02:00 Received message from Master: op=Shutter serial=109992 08:02:00 Shutter LASER open 08:02:00 Received message from Camera: op=State serial=109994 08:02:00 GetSingleValue result=40 Value=cccccccc 08:02:00 SkyScan query 08:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:02:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:00 Parameters OK 08:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:00 Set A/D data flow result=40 08:02:00 Set A/D channel type result=40 08:02:00 Set A/D encoding result=40 08:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:00 Set channel filter=0.000000e+000 result=40 08:02:00 Config A/D Result=40 08:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:00 Get A/D filter: -9.255963e+061 result=40 08:02:00 Get A/D value=-858993460 result=40 08:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:00 Parameters OK 08:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:00 Set A/D data flow result=40 08:02:00 Set A/D channel type result=40 08:02:00 Set A/D encoding result=40 08:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:00 Set channel filter=0.000000e+000 result=40 08:02:00 Config A/D Result=40 08:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:00 Get A/D filter: -9.255963e+061 result=40 08:02:00 Get A/D value=-858993460 result=40 08:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:00 Aux= 08:02:00 Message to Camera, serial 109994 queued 08:02:09 Received message from Master: op=Shutter serial=110004 08:02:09 Shutter LASER close 08:02:10 Received message from Master: op=PointingHead serial=110008 08:02:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:02:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:02:10 Point started: ret=0 08:02:10 point_skyscan result=0 08:02:11 Check angles 08:02:11 SkyScan query 08:02:11 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.845<-21523 Statuses=0009 0009 08:02:11 Msec=0 True Az=136.365 Ze=-142.845 Az status=0009 Ze status=0009 08:02:11 Check angles 08:02:11 SkyScan query 08:02:12 SkyScan query done: ret=0 az=154.2<-10280 ze=-121.485<-20099 Statuses=0009 0009 08:02:12 Msec=750 True Az=154.2 Ze=-121.485 Az status=0009 Ze status=0009 08:02:12 Check angles 08:02:12 SkyScan query 08:02:13 SkyScan query done: ret=0 az=171.66<-11444 ze=-100.44<-18696 Statuses=0009 0009 08:02:13 Msec=1500 True Az=171.66 Ze=-100.44 Az status=0009 Ze status=0009 08:02:13 Check angles 08:02:13 SkyScan query 08:02:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.56<-17304 Statuses=0008 0009 08:02:13 Msec=2250 True Az=176.01 Ze=-79.56 Az status=0008 Ze status=0009 08:02:14 Check angles 08:02:14 SkyScan query 08:02:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.575<-15905 Statuses=0008 0009 08:02:14 Msec=3000 True Az=176.01 Ze=-58.575 Az status=0008 Ze status=0009 08:02:14 Check angles 08:02:14 SkyScan query 08:02:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:02:15 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:02:15 Message to Master queued w/err=0: serial=110008 error=0 08:02:20 Received message from Master: op=Filter serial=110009 08:02:20 Color wheel filter change from 0 to 0 08:02:20 FLIGetFilterPos err=0 currentPosition=0 08:02:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:20 Filter is already there-color wheel unchanged 08:02:20 Received message from Master: op=Shutter serial=110010 08:02:20 Shutter LASER close 08:02:20 Received message from Camera: op=State serial=110012 08:02:20 GetSingleValue result=40 Value=cccccccc 08:02:20 SkyScan query 08:02:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:02:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:21 Parameters OK 08:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:21 Set A/D data flow result=40 08:02:21 Set A/D channel type result=40 08:02:21 Set A/D encoding result=40 08:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:21 Set channel filter=0.000000e+000 result=40 08:02:21 Config A/D Result=40 08:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:21 Get A/D filter: -9.255963e+061 result=40 08:02:21 Get A/D value=-858993460 result=40 08:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:21 Parameters OK 08:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:21 Set A/D data flow result=40 08:02:21 Set A/D channel type result=40 08:02:21 Set A/D encoding result=40 08:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:21 Set channel filter=0.000000e+000 result=40 08:02:21 Config A/D Result=40 08:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:21 Get A/D filter: -9.255963e+061 result=40 08:02:21 Get A/D value=-858993460 result=40 08:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:21 Aux= 08:02:21 Message to Camera, serial 110012 queued 08:02:58 Received message from Master: op=PointingHead serial=110025 08:02:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:02:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:02:58 Point started: ret=0 08:02:58 point_skyscan result=0 08:02:59 Check angles 08:02:59 SkyScan query 08:02:59 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.75<-13450 Statuses=0009 0009 08:02:59 Msec=0 True Az=152.97 Ze=-21.75 Az status=0009 Ze status=0009 08:03:00 Check angles 08:03:00 SkyScan query 08:03:00 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.75<-12050 Statuses=0009 0009 08:03:00 Msec=750 True Az=135.405 Ze=-0.75 Az status=0009 Ze status=0009 08:03:00 Check angles 08:03:00 SkyScan query 08:03:01 SkyScan query done: ret=0 az=117.975<-7865 ze=20.16<-10656 Statuses=0009 0009 08:03:01 Msec=1500 True Az=117.975 Ze=20.16 Az status=0009 Ze status=0009 08:03:01 Check angles 08:03:01 SkyScan query 08:03:02 SkyScan query done: ret=0 az=100.59<-6706 ze=41.16<-9256 Statuses=0009 0009 08:03:02 Msec=2250 True Az=100.59 Ze=41.16 Az status=0009 Ze status=0009 08:03:02 Check angles 08:03:02 SkyScan query 08:03:02 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:03:02 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:03:03 Check angles 08:03:03 SkyScan query 08:03:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:03:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:03:03 Message to Master queued w/err=0: serial=110025 error=0 08:03:08 Received message from Master: op=Filter serial=110026 08:03:08 Color wheel filter change from 0 to 0 08:03:08 FLIGetFilterPos err=0 currentPosition=0 08:03:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:08 Filter is already there-color wheel unchanged 08:03:08 Received message from Master: op=Shutter serial=110027 08:03:08 Shutter LASER close 08:03:08 Received message from Camera: op=State serial=110029 08:03:08 GetSingleValue result=40 Value=cccccccc 08:03:08 SkyScan query 08:03:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:03:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:09 Parameters OK 08:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:09 Set A/D data flow result=40 08:03:09 Set A/D channel type result=40 08:03:09 Set A/D encoding result=40 08:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:09 Set channel filter=0.000000e+000 result=40 08:03:09 Config A/D Result=40 08:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:09 Get A/D filter: -9.255963e+061 result=40 08:03:09 Get A/D value=-858993460 result=40 08:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:09 Parameters OK 08:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:09 Set A/D data flow result=40 08:03:09 Set A/D channel type result=40 08:03:09 Set A/D encoding result=40 08:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:09 Set channel filter=0.000000e+000 result=40 08:03:09 Config A/D Result=40 08:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:09 Get A/D filter: -9.255963e+061 result=40 08:03:09 Get A/D value=-858993460 result=40 08:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:09 Aux= 08:03:09 Message to Camera, serial 110029 queued 08:03:46 Received message from Master: op=PointingHead serial=110042 08:03:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:03:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:03:46 Point started: ret=0 08:03:46 point_skyscan result=0 08:03:47 Check angles 08:03:47 SkyScan query 08:03:47 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 08:03:47 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 08:03:48 Check angles 08:03:48 SkyScan query 08:03:48 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 08:03:48 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 08:03:48 Check angles 08:03:48 SkyScan query 08:03:49 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 08:03:49 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 08:03:49 Check angles 08:03:49 SkyScan query 08:03:50 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 08:03:50 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 08:03:50 Check angles 08:03:50 SkyScan query 08:03:50 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:03:50 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:03:51 Check angles 08:03:51 SkyScan query 08:03:51 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0008 0008 08:03:51 Msec=3750 True Az=176.025 Ze=38.505 Az status=0008 Ze status=0008 08:03:51 Message to Master queued w/err=0: serial=110042 error=0 08:03:56 Received message from Master: op=Filter serial=110043 08:03:56 Color wheel filter change from 0 to 0 08:03:56 FLIGetFilterPos err=0 currentPosition=0 08:03:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:56 Filter is already there-color wheel unchanged 08:03:56 Received message from Master: op=Shutter serial=110044 08:03:56 Shutter LASER close 08:03:56 Received message from Camera: op=State serial=110046 08:03:56 GetSingleValue result=40 Value=cccccccc 08:03:56 SkyScan query 08:03:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:03:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:57 Parameters OK 08:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:57 Set A/D data flow result=40 08:03:57 Set A/D channel type result=40 08:03:57 Set A/D encoding result=40 08:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:57 Set channel filter=0.000000e+000 result=40 08:03:57 Config A/D Result=40 08:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:57 Get A/D filter: -9.255963e+061 result=40 08:03:57 Get A/D value=-858993460 result=40 08:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:57 Parameters OK 08:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:57 Set A/D data flow result=40 08:03:57 Set A/D channel type result=40 08:03:57 Set A/D encoding result=40 08:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:57 Set channel filter=0.000000e+000 result=40 08:03:57 Config A/D Result=40 08:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:57 Get A/D filter: -9.255963e+061 result=40 08:03:57 Get A/D value=-858993460 result=40 08:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:57 Aux= 08:03:57 Message to Camera, serial 110046 queued 08:04:34 Received message from Master: op=PointingHead serial=110059 08:04:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:04:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:04:34 Point started: ret=0 08:04:34 point_skyscan result=0 08:04:35 Check angles 08:04:35 SkyScan query 08:04:36 SkyScan query done: ret=0 az=152.97<-10198 ze=8.625<-11425 Statuses=0009 0009 08:04:36 Msec=0 True Az=152.97 Ze=8.625 Az status=0009 Ze status=0009 08:04:36 Check angles 08:04:36 SkyScan query 08:04:36 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.315<-12821 Statuses=0009 0009 08:04:36 Msec=750 True Az=135.45 Ze=-12.315 Az status=0009 Ze status=0009 08:04:36 Check angles 08:04:36 SkyScan query 08:04:37 SkyScan query done: ret=0 az=117.975<-7865 ze=-33.27<-14218 Statuses=0009 0009 08:04:37 Msec=1500 True Az=117.975 Ze=-33.27 Az status=0009 Ze status=0009 08:04:37 Check angles 08:04:37 SkyScan query 08:04:38 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.54<-15436 Statuses=0009 0009 08:04:38 Msec=2250 True Az=100.575 Ze=-51.54 Az status=0009 Ze status=0009 08:04:38 Check angles 08:04:38 SkyScan query 08:04:39 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:04:39 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:04:39 Check angles 08:04:39 SkyScan query 08:04:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:04:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:04:39 Message to Master queued w/err=0: serial=110059 error=0 08:04:44 Received message from Master: op=Filter serial=110060 08:04:44 Color wheel filter change from 0 to 0 08:04:44 FLIGetFilterPos err=0 currentPosition=0 08:04:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:44 Filter is already there-color wheel unchanged 08:04:45 Received message from Master: op=Shutter serial=110061 08:04:45 Shutter LASER close 08:04:45 Received message from Camera: op=State serial=110063 08:04:45 GetSingleValue result=40 Value=cccccccc 08:04:45 SkyScan query 08:04:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:04:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:45 Parameters OK 08:04:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:45 Set A/D data flow result=40 08:04:45 Set A/D channel type result=40 08:04:45 Set A/D encoding result=40 08:04:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:45 Set channel filter=0.000000e+000 result=40 08:04:45 Config A/D Result=40 08:04:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:45 Get A/D filter: -9.255963e+061 result=40 08:04:45 Get A/D value=-858993460 result=40 08:04:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:45 Parameters OK 08:04:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:45 Set A/D data flow result=40 08:04:45 Set A/D channel type result=40 08:04:45 Set A/D encoding result=40 08:04:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:45 Set channel filter=0.000000e+000 result=40 08:04:45 Config A/D Result=40 08:04:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:45 Get A/D filter: -9.255963e+061 result=40 08:04:45 Get A/D value=-858993460 result=40 08:04:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:45 Aux= 08:04:45 Message to Camera, serial 110063 queued 08:05:22 Received message from Master: op=PointingHead serial=110076 08:05:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:05:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:05:22 Point started: ret=0 08:05:22 point_skyscan result=0 08:05:23 Check angles 08:05:23 SkyScan query 08:05:24 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.27<-17418 Statuses=0009 0009 08:05:24 Msec=0 True Az=109.14 Ze=-81.27 Az status=0009 Ze status=0009 08:05:24 Check angles 08:05:24 SkyScan query 08:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.69<-18846 Statuses=0008 0009 08:05:24 Msec=750 True Az=112.995 Ze=-102.69 Az status=0008 Ze status=0009 08:05:25 Check angles 08:05:25 SkyScan query 08:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.08<-20272 Statuses=0008 0009 08:05:25 Msec=1500 True Az=112.995 Ze=-124.08 Az status=0008 Ze status=0009 08:05:25 Check angles 08:05:25 SkyScan query 08:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.02<-21668 Statuses=0008 0009 08:05:26 Msec=2250 True Az=112.995 Ze=-145.02 Az status=0008 Ze status=0009 08:05:26 Check angles 08:05:26 SkyScan query 08:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.395<-23093 Statuses=0008 0009 08:05:27 Msec=3000 True Az=112.995 Ze=-166.395 Az status=0008 Ze status=0009 08:05:27 Check angles 08:05:27 SkyScan query 08:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:05:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:05:27 Message to Master queued w/err=0: serial=110076 error=0 08:05:32 Received message from Master: op=Filter serial=110077 08:05:32 Color wheel filter change from 0 to 0 08:05:32 FLIGetFilterPos err=0 currentPosition=0 08:05:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:32 Filter is already there-color wheel unchanged 08:05:33 Received message from Master: op=Shutter serial=110078 08:05:33 Shutter LASER open 08:05:33 Received message from Camera: op=State serial=110080 08:05:33 GetSingleValue result=40 Value=cccccccc 08:05:33 SkyScan query 08:05:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:05:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:33 Parameters OK 08:05:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:33 Set A/D data flow result=40 08:05:33 Set A/D channel type result=40 08:05:33 Set A/D encoding result=40 08:05:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:33 Set channel filter=0.000000e+000 result=40 08:05:33 Config A/D Result=40 08:05:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:33 Get A/D filter: -9.255963e+061 result=40 08:05:33 Get A/D value=-858993460 result=40 08:05:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:33 Parameters OK 08:05:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:33 Set A/D data flow result=40 08:05:33 Set A/D channel type result=40 08:05:33 Set A/D encoding result=40 08:05:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:33 Set channel filter=0.000000e+000 result=40 08:05:33 Config A/D Result=40 08:05:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:33 Get A/D filter: -9.255963e+061 result=40 08:05:33 Get A/D value=-858993460 result=40 08:05:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:33 Aux= 08:05:33 Message to Camera, serial 110080 queued 08:05:42 Received message from Master: op=Shutter serial=110090 08:05:42 Shutter LASER close 08:05:42 Received message from Master: op=PointingHead serial=110094 08:05:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:05:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-13 08:05:43] 08:05:43 Point started: ret=0 08:05:43 point_skyscan result=0 08:05:43 Check angles 08:05:43 SkyScan query 08:05:44 SkyScan query done: ret=0 az=88.59<-5906 ze=155.565<-1629 Statuses=0009 0009 08:05:44 Msec=0 True Az=88.59 Ze=155.565 Az status=0009 Ze status=0009 08:05:44 Check angles 08:05:44 SkyScan query 08:05:45 SkyScan query done: ret=0 az=70.965<-4731 ze=134.565<-3029 Statuses=0009 0009 08:05:45 Msec=750 True Az=70.965 Ze=134.565 Az status=0009 Ze status=0009 08:05:45 Check angles 08:05:45 SkyScan query 08:05:46 SkyScan query done: ret=0 az=53.34<-3556 ze=113.19<-4454 Statuses=0009 0009 08:05:46 Msec=1500 True Az=53.34 Ze=113.19 Az status=0009 Ze status=0009 08:05:46 Check angles 08:05:46 SkyScan query 08:05:46 SkyScan query done: ret=0 az=41.04<-2736 ze=92.19<-5854 Statuses=0009 0009 08:05:46 Msec=2250 True Az=41.04 Ze=92.19 Az status=0009 Ze status=0009 08:05:46 Check angles 08:05:46 SkyScan query 08:05:47 SkyScan query done: ret=0 az=40.995<-2733 ze=71.28<-7248 Statuses=0008 0009 08:05:47 Msec=3000 True Az=40.995 Ze=71.28 Az status=0008 Ze status=0009 08:05:47 Check angles 08:05:47 SkyScan query 08:05:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.81<-8546 Statuses=0008 0009 08:05:48 Msec=3750 True Az=40.995 Ze=51.81 Az status=0008 Ze status=0009 08:05:48 Check angles 08:05:48 SkyScan query 08:05:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:05:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:05:49 Message to Master queued w/err=0: serial=110094 error=0 08:05:54 Received message from Master: op=Filter serial=110095 08:05:54 Color wheel filter change from 0 to 0 08:05:54 FLIGetFilterPos err=0 currentPosition=0 08:05:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:54 Filter is already there-color wheel unchanged 08:05:54 Received message from Master: op=Shutter serial=110096 08:05:54 Shutter LASER close 08:05:54 Received message from Camera: op=State serial=110098 08:05:54 GetSingleValue result=40 Value=cccccccc 08:05:54 SkyScan query 08:05:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:05:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:54 Parameters OK 08:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:54 Set A/D data flow result=40 08:05:54 Set A/D channel type result=40 08:05:54 Set A/D encoding result=40 08:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:54 Set channel filter=0.000000e+000 result=40 08:05:54 Config A/D Result=40 08:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:54 Get A/D filter: -9.255963e+061 result=40 08:05:54 Get A/D value=-858993460 result=40 08:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:54 Parameters OK 08:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:54 Set A/D data flow result=40 08:05:54 Set A/D channel type result=40 08:05:54 Set A/D encoding result=40 08:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:54 Set channel filter=0.000000e+000 result=40 08:05:54 Config A/D Result=40 08:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:54 Get A/D filter: -9.255963e+061 result=40 08:05:54 Get A/D value=-858993460 result=40 08:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:54 Aux= 08:05:54 Message to Camera, serial 110098 queued 08:06:31 Received message from Master: op=PointingHead serial=110111 08:06:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:06:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:06:32 Point started: ret=0 08:06:32 point_skyscan result=0 08:06:32 Check angles 08:06:32 SkyScan query 08:06:33 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 08:06:33 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 08:06:33 Check angles 08:06:33 SkyScan query 08:06:34 SkyScan query done: ret=0 az=81.3<-5420 ze=66.495<-7567 Statuses=0009 0008 08:06:34 Msec=750 True Az=81.3 Ze=66.495 Az status=0009 Ze status=0008 08:06:34 Check angles 08:06:34 SkyScan query 08:06:34 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 08:06:34 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 08:06:35 Check angles 08:06:35 SkyScan query 08:06:35 SkyScan query done: ret=0 az=116.88<-7792 ze=66.495<-7567 Statuses=0009 0008 08:06:35 Msec=2250 True Az=116.88 Ze=66.495 Az status=0009 Ze status=0008 08:06:35 Check angles 08:06:35 SkyScan query 08:06:36 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 08:06:36 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 08:06:36 Check angles 08:06:36 SkyScan query 08:06:37 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 08:06:37 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 08:06:37 Check angles 08:06:37 SkyScan query 08:06:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:06:37 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:06:37 Message to Master queued w/err=0: serial=110111 error=0 08:06:42 Received message from Master: op=Filter serial=110112 08:06:42 Color wheel filter change from 0 to 0 08:06:42 FLIGetFilterPos err=0 currentPosition=0 08:06:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:42 Filter is already there-color wheel unchanged 08:06:43 Received message from Master: op=Shutter serial=110113 08:06:43 Shutter LASER close 08:06:43 Received message from Camera: op=State serial=110115 08:06:43 GetSingleValue result=40 Value=cccccccc 08:06:43 SkyScan query 08:06:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:06:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:43 Parameters OK 08:06:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:43 Set A/D data flow result=40 08:06:43 Set A/D channel type result=40 08:06:43 Set A/D encoding result=40 08:06:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:43 Set channel filter=0.000000e+000 result=40 08:06:43 Config A/D Result=40 08:06:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:43 Get A/D filter: -9.255963e+061 result=40 08:06:43 Get A/D value=-858993460 result=40 08:06:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:43 Parameters OK 08:06:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:43 Set A/D data flow result=40 08:06:43 Set A/D channel type result=40 08:06:43 Set A/D encoding result=40 08:06:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:43 Set channel filter=0.000000e+000 result=40 08:06:43 Config A/D Result=40 08:06:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:43 Get A/D filter: -9.255963e+061 result=40 08:06:43 Get A/D value=-858993460 result=40 08:06:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:43 Aux= 08:06:43 Message to Camera, serial 110115 queued 08:07:20 Received message from Master: op=PointingHead serial=110128 08:07:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:07:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:07:20 Point started: ret=0 08:07:20 point_skyscan result=0 08:07:21 Check angles 08:07:21 SkyScan query 08:07:22 SkyScan query done: ret=0 az=134.805<-8987 ze=36.48<-9568 Statuses=0009 0009 08:07:22 Msec=0 True Az=134.805 Ze=36.48 Az status=0009 Ze status=0009 08:07:22 Check angles 08:07:22 SkyScan query 08:07:23 SkyScan query done: ret=0 az=117.33<-7822 ze=15.555<-10963 Statuses=0009 0009 08:07:23 Msec=750 True Az=117.33 Ze=15.555 Az status=0009 Ze status=0009 08:07:23 Check angles 08:07:23 SkyScan query 08:07:23 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.43<-12362 Statuses=0009 0009 08:07:23 Msec=1500 True Az=99.915 Ze=-5.43 Az status=0009 Ze status=0009 08:07:23 Check angles 08:07:23 SkyScan query 08:07:24 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.385<-13759 Statuses=0009 0009 08:07:24 Msec=2250 True Az=82.41 Ze=-26.385 Az status=0009 Ze status=0009 08:07:24 Check angles 08:07:24 SkyScan query 08:07:25 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.565<-14571 Statuses=0009 0008 08:07:25 Msec=3000 True Az=64.875 Ze=-38.565 Az status=0009 Ze status=0008 08:07:25 Check angles 08:07:25 SkyScan query 08:07:26 SkyScan query done: ret=0 az=47.385<-3159 ze=-38.535<-14569 Statuses=0009 0008 08:07:26 Msec=3750 True Az=47.385 Ze=-38.535 Az status=0009 Ze status=0008 08:07:26 Check angles 08:07:26 SkyScan query 08:07:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:07:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:07:26 Message to Master queued w/err=0: serial=110128 error=0 08:07:31 Received message from Master: op=Filter serial=110129 08:07:31 Color wheel filter change from 0 to 0 08:07:31 FLIGetFilterPos err=0 currentPosition=0 08:07:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:31 Filter is already there-color wheel unchanged 08:07:31 Received message from Master: op=Shutter serial=110130 08:07:31 Shutter LASER close 08:07:31 Received message from Camera: op=State serial=110132 08:07:31 GetSingleValue result=40 Value=cccccccc 08:07:31 SkyScan query 08:07:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:07:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:32 Parameters OK 08:07:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:32 Set A/D data flow result=40 08:07:32 Set A/D channel type result=40 08:07:32 Set A/D encoding result=40 08:07:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:32 Set channel filter=0.000000e+000 result=40 08:07:32 Config A/D Result=40 08:07:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:32 Get A/D filter: -9.255963e+061 result=40 08:07:32 Get A/D value=-858993460 result=40 08:07:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:32 Parameters OK 08:07:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:32 Set A/D data flow result=40 08:07:32 Set A/D channel type result=40 08:07:32 Set A/D encoding result=40 08:07:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:32 Set channel filter=0.000000e+000 result=40 08:07:32 Config A/D Result=40 08:07:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:32 Get A/D filter: -9.255963e+061 result=40 08:07:32 Get A/D value=-858993460 result=40 08:07:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:32 Aux= 08:07:32 Message to Camera, serial 110132 queued 08:08:09 Received message from Master: op=PointingHead serial=110145 08:08:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:08:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:08:09 Point started: ret=0 08:08:09 point_skyscan result=0 08:08:10 Check angles 08:08:10 SkyScan query 08:08:11 SkyScan query done: ret=0 az=64.665<-4311 ze=-68.85<-16590 Statuses=0009 0009 08:08:11 Msec=0 True Az=64.665 Ze=-68.85 Az status=0009 Ze status=0009 08:08:11 Check angles 08:08:11 SkyScan query 08:08:11 SkyScan query done: ret=0 az=82.47<-5498 ze=-90.24<-18016 Statuses=0009 0009 08:08:11 Msec=750 True Az=82.47 Ze=-90.24 Az status=0009 Ze status=0009 08:08:12 Check angles 08:08:12 SkyScan query 08:08:12 SkyScan query done: ret=0 az=100.08<-6672 ze=-111.18<-19412 Statuses=0009 0009 08:08:12 Msec=1500 True Az=100.08 Ze=-111.18 Az status=0009 Ze status=0009 08:08:12 Check angles 08:08:12 SkyScan query 08:08:13 SkyScan query done: ret=0 az=117.585<-7839 ze=-132.105<-20807 Statuses=0009 0009 08:08:13 Msec=2250 True Az=117.585 Ze=-132.105 Az status=0009 Ze status=0009 08:08:13 Check angles 08:08:13 SkyScan query 08:08:14 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 08:08:14 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 08:08:14 Check angles 08:08:14 SkyScan query 08:08:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:08:14 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:08:14 Message to Master queued w/err=0: serial=110145 error=0 08:08:19 Received message from Master: op=Filter serial=110146 08:08:19 Color wheel filter change from 0 to 0 08:08:19 FLIGetFilterPos err=0 currentPosition=0 08:08:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:19 Filter is already there-color wheel unchanged 08:08:20 Received message from Master: op=Shutter serial=110147 08:08:20 Shutter LASER close 08:08:20 Received message from Camera: op=State serial=110149 08:08:20 GetSingleValue result=40 Value=cccccccc 08:08:20 SkyScan query 08:08:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:08:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:20 Parameters OK 08:08:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:20 Set A/D data flow result=40 08:08:20 Set A/D channel type result=40 08:08:20 Set A/D encoding result=40 08:08:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:20 Set channel filter=0.000000e+000 result=40 08:08:20 Config A/D Result=40 08:08:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:20 Get A/D filter: -9.255963e+061 result=40 08:08:20 Get A/D value=-858993460 result=40 08:08:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:20 Parameters OK 08:08:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:20 Set A/D data flow result=40 08:08:20 Set A/D channel type result=40 08:08:20 Set A/D encoding result=40 08:08:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:20 Set channel filter=0.000000e+000 result=40 08:08:20 Config A/D Result=40 08:08:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:20 Get A/D filter: -9.255963e+061 result=40 08:08:20 Get A/D value=-858993460 result=40 08:08:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:20 Aux= 08:08:20 Message to Camera, serial 110149 queued 08:08:57 Received message from Master: op=PointingHead serial=110162 08:08:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:08:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:08:57 Point started: ret=0 08:08:57 point_skyscan result=0 08:08:58 Check angles 08:08:58 SkyScan query 08:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0008 0009 08:08:59 Msec=0 True Az=112.995 Ze=-171.48 Az status=0008 Ze status=0009 08:08:59 Check angles 08:08:59 SkyScan query 08:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:08:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:08:59 Message to Master queued w/err=0: serial=110162 error=0 08:09:04 Received message from Master: op=Filter serial=110163 08:09:04 Color wheel filter change from 0 to 0 08:09:04 FLIGetFilterPos err=0 currentPosition=0 08:09:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:04 Filter is already there-color wheel unchanged 08:09:05 Received message from Master: op=Shutter serial=110164 08:09:05 Shutter LASER open 08:09:05 Received message from Camera: op=State serial=110166 08:09:05 GetSingleValue result=40 Value=cccccccc 08:09:05 SkyScan query 08:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:09:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:05 Parameters OK 08:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:05 Set A/D data flow result=40 08:09:05 Set A/D channel type result=40 08:09:05 Set A/D encoding result=40 08:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:05 Set channel filter=0.000000e+000 result=40 08:09:05 Config A/D Result=40 08:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:05 Get A/D filter: -9.255963e+061 result=40 08:09:05 Get A/D value=-858993460 result=40 08:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:05 Parameters OK 08:09:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:05 Set A/D data flow result=40 08:09:05 Set A/D channel type result=40 08:09:05 Set A/D encoding result=40 08:09:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:05 Set channel filter=0.000000e+000 result=40 08:09:05 Config A/D Result=40 08:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:05 Get A/D filter: -9.255963e+061 result=40 08:09:05 Get A/D value=-858993460 result=40 08:09:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:05 Aux= 08:09:05 Message to Camera, serial 110166 queued 08:09:14 Received message from Master: op=Shutter serial=110176 08:09:14 Shutter LASER close 08:09:14 Received message from Master: op=PointingHead serial=110180 08:09:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:09:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:09:15 Point started: ret=0 08:09:15 point_skyscan result=0 08:09:16 Check angles 08:09:16 SkyScan query 08:09:16 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.175<-21545 Statuses=0009 0009 08:09:16 Msec=0 True Az=135.96 Ze=-143.175 Az status=0009 Ze status=0009 08:09:16 Check angles 08:09:16 SkyScan query 08:09:17 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.22<-20148 Statuses=0009 0009 08:09:17 Msec=750 True Az=153.42 Ze=-122.22 Az status=0009 Ze status=0009 08:09:17 Check angles 08:09:17 SkyScan query 08:09:18 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.325<-18755 Statuses=0009 0009 08:09:18 Msec=1500 True Az=171.09 Ze=-101.325 Az status=0009 Ze status=0009 08:09:18 Check angles 08:09:18 SkyScan query 08:09:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.34<-17356 Statuses=0008 0009 08:09:18 Msec=2250 True Az=175.995 Ze=-80.34 Az status=0008 Ze status=0009 08:09:19 Check angles 08:09:19 SkyScan query 08:09:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.385<-15959 Statuses=0008 0009 08:09:19 Msec=3000 True Az=176.01 Ze=-59.385 Az status=0008 Ze status=0009 08:09:19 Check angles 08:09:19 SkyScan query 08:09:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:09:20 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:09:20 Message to Master queued w/err=0: serial=110180 error=0 08:09:25 Received message from Master: op=Filter serial=110181 08:09:25 Color wheel filter change from 0 to 0 08:09:25 FLIGetFilterPos err=0 currentPosition=0 08:09:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:25 Filter is already there-color wheel unchanged 08:09:25 Received message from Master: op=Shutter serial=110182 08:09:25 Shutter LASER close 08:09:25 Received message from Camera: op=State serial=110184 08:09:25 GetSingleValue result=40 Value=cccccccc 08:09:25 SkyScan query 08:09:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:09:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:26 Parameters OK 08:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:26 Set A/D data flow result=40 08:09:26 Set A/D channel type result=40 08:09:26 Set A/D encoding result=40 08:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:26 Set channel filter=0.000000e+000 result=40 08:09:26 Config A/D Result=40 08:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:26 Get A/D filter: -9.255963e+061 result=40 08:09:26 Get A/D value=-858993460 result=40 08:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:26 Parameters OK 08:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:26 Set A/D data flow result=40 08:09:26 Set A/D channel type result=40 08:09:26 Set A/D encoding result=40 08:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:26 Set channel filter=0.000000e+000 result=40 08:09:26 Config A/D Result=40 08:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:26 Get A/D filter: -9.255963e+061 result=40 08:09:26 Get A/D value=-858993460 result=40 08:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:26 Aux= 08:09:26 Message to Camera, serial 110184 queued 08:10:02 Received message from Master: op=PointingHead serial=110196 08:10:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:10:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:10:02 Point started: ret=0 08:10:02 point_skyscan result=0 08:10:03 Check angles 08:10:03 SkyScan query 08:10:03 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.75<-13450 Statuses=0009 0009 08:10:03 Msec=0 True Az=152.97 Ze=-21.75 Az status=0009 Ze status=0009 08:10:04 Check angles 08:10:04 SkyScan query 08:10:04 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.75<-12050 Statuses=0009 0009 08:10:04 Msec=750 True Az=135.405 Ze=-0.75 Az status=0009 Ze status=0009 08:10:04 Check angles 08:10:04 SkyScan query 08:10:05 SkyScan query done: ret=0 az=117.99<-7866 ze=20.175<-10655 Statuses=0009 0009 08:10:05 Msec=1500 True Az=117.99 Ze=20.175 Az status=0009 Ze status=0009 08:10:05 Check angles 08:10:05 SkyScan query 08:10:06 SkyScan query done: ret=0 az=100.455<-6697 ze=41.16<-9256 Statuses=0009 0009 08:10:06 Msec=2250 True Az=100.455 Ze=41.16 Az status=0009 Ze status=0009 08:10:06 Check angles 08:10:06 SkyScan query 08:10:06 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 08:10:06 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 08:10:07 Check angles 08:10:07 SkyScan query 08:10:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:10:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:10:07 Message to Master queued w/err=0: serial=110196 error=0 08:10:12 Received message from Master: op=Filter serial=110197 08:10:12 Color wheel filter change from 0 to 0 08:10:12 FLIGetFilterPos err=0 currentPosition=0 08:10:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:12 Filter is already there-color wheel unchanged 08:10:12 Received message from Master: op=Shutter serial=110198 08:10:12 Shutter LASER close 08:10:12 Received message from Camera: op=State serial=110200 08:10:12 GetSingleValue result=40 Value=cccccccc 08:10:12 SkyScan query 08:10:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:10:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:13 Parameters OK 08:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:13 Set A/D data flow result=40 08:10:13 Set A/D channel type result=40 08:10:13 Set A/D encoding result=40 08:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:13 Set channel filter=0.000000e+000 result=40 08:10:13 Config A/D Result=40 08:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:13 Get A/D filter: -9.255963e+061 result=40 08:10:13 Get A/D value=-858993460 result=40 08:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:13 Parameters OK 08:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:13 Set A/D data flow result=40 08:10:13 Set A/D channel type result=40 08:10:13 Set A/D encoding result=40 08:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:13 Set channel filter=0.000000e+000 result=40 08:10:13 Config A/D Result=40 08:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:13 Get A/D filter: -9.255963e+061 result=40 08:10:13 Get A/D value=-858993460 result=40 08:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:13 Aux= 08:10:13 Message to Camera, serial 110200 queued 08:10:50 Received message from Master: op=PointingHead serial=110213 08:10:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:10:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:10:50 Point started: ret=0 08:10:50 point_skyscan result=0 08:10:51 Check angles 08:10:51 SkyScan query 08:10:51 SkyScan query done: ret=0 az=109.32<-7288 ze=38.49<-9434 Statuses=0009 0008 08:10:51 Msec=0 True Az=109.32 Ze=38.49 Az status=0009 Ze status=0008 08:10:52 Check angles 08:10:52 SkyScan query 08:10:52 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 08:10:52 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 08:10:52 Check angles 08:10:52 SkyScan query 08:10:53 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 08:10:53 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 08:10:53 Check angles 08:10:53 SkyScan query 08:10:54 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 08:10:54 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 08:10:54 Check angles 08:10:54 SkyScan query 08:10:54 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:10:54 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:10:55 Check angles 08:10:55 SkyScan query 08:10:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:10:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:10:55 Message to Master queued w/err=0: serial=110213 error=0 08:11:00 Received message from Master: op=Filter serial=110214 08:11:00 Color wheel filter change from 0 to 0 08:11:00 FLIGetFilterPos err=0 currentPosition=0 08:11:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:00 Filter is already there-color wheel unchanged 08:11:00 Received message from Master: op=Shutter serial=110215 08:11:00 Shutter LASER close 08:11:00 Received message from Camera: op=State serial=110217 08:11:00 GetSingleValue result=40 Value=cccccccc 08:11:00 SkyScan query 08:11:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:11:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:01 Parameters OK 08:11:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:01 Set A/D data flow result=40 08:11:01 Set A/D channel type result=40 08:11:01 Set A/D encoding result=40 08:11:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:01 Set channel filter=0.000000e+000 result=40 08:11:01 Config A/D Result=40 08:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:01 Get A/D filter: -9.255963e+061 result=40 08:11:01 Get A/D value=-858993460 result=40 08:11:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:01 Parameters OK 08:11:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:01 Set A/D data flow result=40 08:11:01 Set A/D channel type result=40 08:11:01 Set A/D encoding result=40 08:11:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:01 Set channel filter=0.000000e+000 result=40 08:11:01 Config A/D Result=40 08:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:01 Get A/D filter: -9.255963e+061 result=40 08:11:01 Get A/D value=-858993460 result=40 08:11:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:01 Aux= 08:11:01 Message to Camera, serial 110217 queued 08:11:38 Received message from Master: op=PointingHead serial=110230 08:11:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:11:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:11:38 Point started: ret=0 08:11:38 point_skyscan result=0 08:11:39 Check angles 08:11:39 SkyScan query 08:11:40 SkyScan query done: ret=0 az=153.18<-10212 ze=8.775<-11415 Statuses=0009 0009 08:11:40 Msec=0 True Az=153.18 Ze=8.775 Az status=0009 Ze status=0009 08:11:40 Check angles 08:11:40 SkyScan query 08:11:40 SkyScan query done: ret=0 az=135.75<-9050 ze=-12.165<-12811 Statuses=0009 0009 08:11:40 Msec=750 True Az=135.75 Ze=-12.165 Az status=0009 Ze status=0009 08:11:40 Check angles 08:11:40 SkyScan query 08:11:41 SkyScan query done: ret=0 az=118.23<-7882 ze=-33.105<-14207 Statuses=0009 0009 08:11:41 Msec=1500 True Az=118.23 Ze=-33.105 Az status=0009 Ze status=0009 08:11:41 Check angles 08:11:41 SkyScan query 08:11:42 SkyScan query done: ret=0 az=100.71<-6714 ze=-51.525<-15435 Statuses=0009 0009 08:11:42 Msec=2250 True Az=100.71 Ze=-51.525 Az status=0009 Ze status=0009 08:11:42 Check angles 08:11:42 SkyScan query 08:11:43 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:11:43 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:11:43 Check angles 08:11:43 SkyScan query 08:11:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:11:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:11:43 Message to Master queued w/err=0: serial=110230 error=0 08:11:48 Received message from Master: op=Filter serial=110231 08:11:48 Color wheel filter change from 0 to 0 08:11:48 FLIGetFilterPos err=0 currentPosition=0 08:11:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:48 Filter is already there-color wheel unchanged 08:11:48 Received message from Master: op=Shutter serial=110232 08:11:48 Shutter LASER close 08:11:48 Received message from Camera: op=State serial=110234 08:11:48 GetSingleValue result=40 Value=cccccccc 08:11:48 SkyScan query 08:11:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:11:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:49 Parameters OK 08:11:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:49 Set A/D data flow result=40 08:11:49 Set A/D channel type result=40 08:11:49 Set A/D encoding result=40 08:11:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:49 Set channel filter=0.000000e+000 result=40 08:11:49 Config A/D Result=40 08:11:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:49 Get A/D filter: -9.255963e+061 result=40 08:11:49 Get A/D value=-858993460 result=40 08:11:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:49 Parameters OK 08:11:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:49 Set A/D data flow result=40 08:11:49 Set A/D channel type result=40 08:11:49 Set A/D encoding result=40 08:11:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:49 Set channel filter=0.000000e+000 result=40 08:11:49 Config A/D Result=40 08:11:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:49 Get A/D filter: -9.255963e+061 result=40 08:11:49 Get A/D value=-858993460 result=40 08:11:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:49 Aux= 08:11:49 Message to Camera, serial 110234 queued 08:12:26 Received message from Master: op=PointingHead serial=110247 08:12:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:12:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:12:26 Point started: ret=0 08:12:26 point_skyscan result=0 08:12:27 Check angles 08:12:27 SkyScan query 08:12:28 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.165<-17411 Statuses=0009 0009 08:12:28 Msec=0 True Az=109.14 Ze=-81.165 Az status=0009 Ze status=0009 08:12:28 Check angles 08:12:28 SkyScan query 08:12:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 08:12:28 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 08:12:28 Check angles 08:12:28 SkyScan query 08:12:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.075<-20205 Statuses=0008 0009 08:12:29 Msec=1500 True Az=112.995 Ze=-123.075 Az status=0008 Ze status=0009 08:12:29 Check angles 08:12:29 SkyScan query 08:12:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.015<-21601 Statuses=0008 0009 08:12:30 Msec=2250 True Az=112.995 Ze=-144.015 Az status=0008 Ze status=0009 08:12:30 Check angles 08:12:30 SkyScan query 08:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 08:12:31 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 08:12:31 Check angles 08:12:31 SkyScan query 08:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:12:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:12:31 Message to Master queued w/err=0: serial=110247 error=0 08:12:36 Received message from Master: op=Filter serial=110248 08:12:36 Color wheel filter change from 0 to 0 08:12:36 FLIGetFilterPos err=0 currentPosition=0 08:12:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:36 Filter is already there-color wheel unchanged 08:12:36 Received message from Master: op=Shutter serial=110249 08:12:36 Shutter LASER open 08:12:37 Received message from Camera: op=State serial=110251 08:12:37 GetSingleValue result=40 Value=cccccccc 08:12:37 SkyScan query 08:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:12:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:37 Parameters OK 08:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:37 Set A/D data flow result=40 08:12:37 Set A/D channel type result=40 08:12:37 Set A/D encoding result=40 08:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:37 Set channel filter=0.000000e+000 result=40 08:12:37 Config A/D Result=40 08:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:37 Get A/D filter: -9.255963e+061 result=40 08:12:37 Get A/D value=-858993460 result=40 08:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:37 Parameters OK 08:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:37 Set A/D data flow result=40 08:12:37 Set A/D channel type result=40 08:12:37 Set A/D encoding result=40 08:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:37 Set channel filter=0.000000e+000 result=40 08:12:37 Config A/D Result=40 08:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:37 Get A/D filter: -9.255963e+061 result=40 08:12:37 Get A/D value=-858993460 result=40 08:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:37 Aux= 08:12:37 Message to Camera, serial 110251 queued 08:12:46 Received message from Master: op=Shutter serial=110261 08:12:46 Shutter LASER close 08:12:46 Received message from Master: op=PointingHead serial=110265 08:12:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:12:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:12:46 Point started: ret=0 08:12:46 point_skyscan result=0 08:12:47 Check angles 08:12:47 SkyScan query 08:12:48 SkyScan query done: ret=0 az=90.03<-6002 ze=157.455<-1503 Statuses=0009 0009 08:12:48 Msec=0 True Az=90.03 Ze=157.455 Az status=0009 Ze status=0009 08:12:48 Check angles 08:12:48 SkyScan query 08:12:49 SkyScan query done: ret=0 az=72.075<-4805 ze=136.02<-2932 Statuses=0009 0009 08:12:49 Msec=750 True Az=72.075 Ze=136.02 Az status=0009 Ze status=0009 08:12:49 Check angles 08:12:49 SkyScan query 08:12:49 SkyScan query done: ret=0 az=54.84<-3656 ze=115.08<-4328 Statuses=0009 0009 08:12:49 Msec=1500 True Az=54.84 Ze=115.08 Az status=0009 Ze status=0009 08:12:49 Check angles 08:12:49 SkyScan query 08:12:50 SkyScan query done: ret=0 az=40.89<-2726 ze=94.095<-5727 Statuses=0009 0009 08:12:50 Msec=2250 True Az=40.89 Ze=94.095 Az status=0009 Ze status=0009 08:12:50 Check angles 08:12:50 SkyScan query 08:12:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.14<-7124 Statuses=0008 0009 08:12:51 Msec=3000 True Az=40.995 Ze=73.14 Az status=0008 Ze status=0009 08:12:51 Check angles 08:12:51 SkyScan query 08:12:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 08:12:52 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 08:12:52 Check angles 08:12:52 SkyScan query 08:12:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:12:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:12:52 Message to Master queued w/err=0: serial=110265 error=0 08:12:57 Received message from Master: op=Filter serial=110266 08:12:57 Color wheel filter change from 0 to 0 08:12:57 FLIGetFilterPos err=0 currentPosition=0 08:12:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:57 Filter is already there-color wheel unchanged 08:12:57 Received message from Master: op=Shutter serial=110267 08:12:57 Shutter LASER close 08:12:58 Received message from Camera: op=State serial=110269 08:12:58 GetSingleValue result=40 Value=cccccccc 08:12:58 SkyScan query 08:12:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:12:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:58 Parameters OK 08:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:58 Set A/D data flow result=40 08:12:58 Set A/D channel type result=40 08:12:58 Set A/D encoding result=40 08:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:58 Set channel filter=0.000000e+000 result=40 08:12:58 Config A/D Result=40 08:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:58 Get A/D filter: -9.255963e+061 result=40 08:12:58 Get A/D value=-858993460 result=40 08:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:58 Parameters OK 08:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:58 Set A/D data flow result=40 08:12:58 Set A/D channel type result=40 08:12:58 Set A/D encoding result=40 08:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:58 Set channel filter=0.000000e+000 result=40 08:12:58 Config A/D Result=40 08:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:58 Get A/D filter: -9.255963e+061 result=40 08:12:58 Get A/D value=-858993460 result=40 08:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:58 Aux= 08:12:58 Message to Camera, serial 110269 queued 08:13:35 Received message from Master: op=PointingHead serial=110282 08:13:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:13:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:13:35 Point started: ret=0 08:13:35 point_skyscan result=0 08:13:36 Check angles 08:13:36 SkyScan query 08:13:37 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 08:13:37 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 08:13:37 Check angles 08:13:37 SkyScan query 08:13:37 SkyScan query done: ret=0 az=81.78<-5452 ze=66.495<-7567 Statuses=0009 0008 08:13:37 Msec=750 True Az=81.78 Ze=66.495 Az status=0009 Ze status=0008 08:13:38 Check angles 08:13:38 SkyScan query 08:13:38 SkyScan query done: ret=0 az=99.675<-6645 ze=66.495<-7567 Statuses=0009 0008 08:13:38 Msec=1500 True Az=99.675 Ze=66.495 Az status=0009 Ze status=0008 08:13:38 Check angles 08:13:38 SkyScan query 08:13:39 SkyScan query done: ret=0 az=117.21<-7814 ze=66.495<-7567 Statuses=0009 0008 08:13:39 Msec=2250 True Az=117.21 Ze=66.495 Az status=0009 Ze status=0008 08:13:39 Check angles 08:13:39 SkyScan query 08:13:40 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 08:13:40 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 08:13:40 Check angles 08:13:40 SkyScan query 08:13:40 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 08:13:40 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 08:13:41 Check angles 08:13:41 SkyScan query 08:13:41 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 08:13:41 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 08:13:41 Message to Master queued w/err=0: serial=110282 error=0 08:13:46 Received message from Master: op=Filter serial=110283 08:13:46 Color wheel filter change from 0 to 0 08:13:46 FLIGetFilterPos err=0 currentPosition=0 08:13:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:46 Filter is already there-color wheel unchanged 08:13:46 Received message from Master: op=Shutter serial=110284 08:13:46 Shutter LASER close 08:13:46 Received message from Camera: op=State serial=110286 08:13:46 GetSingleValue result=40 Value=cccccccc 08:13:46 SkyScan query 08:13:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:13:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:47 Parameters OK 08:13:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:47 Set A/D data flow result=40 08:13:47 Set A/D channel type result=40 08:13:47 Set A/D encoding result=40 08:13:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:47 Set channel filter=0.000000e+000 result=40 08:13:47 Config A/D Result=40 08:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:47 Get A/D filter: -9.255963e+061 result=40 08:13:47 Get A/D value=-858993460 result=40 08:13:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:47 Parameters OK 08:13:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:47 Set A/D data flow result=40 08:13:47 Set A/D channel type result=40 08:13:47 Set A/D encoding result=40 08:13:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:47 Set channel filter=0.000000e+000 result=40 08:13:47 Config A/D Result=40 08:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:47 Get A/D filter: -9.255963e+061 result=40 08:13:47 Get A/D value=-858993460 result=40 08:13:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:47 Aux= 08:13:47 Message to Camera, serial 110286 queued 08:14:23 Received message from Master: op=PointingHead serial=110298 08:14:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:14:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:14:23 Point started: ret=0 08:14:23 point_skyscan result=0 08:14:24 Check angles 08:14:24 SkyScan query 08:14:25 SkyScan query done: ret=0 az=134.79<-8986 ze=36.735<-9551 Statuses=0009 0009 08:14:25 Msec=0 True Az=134.79 Ze=36.735 Az status=0009 Ze status=0009 08:14:25 Check angles 08:14:25 SkyScan query 08:14:25 SkyScan query done: ret=0 az=117.51<-7834 ze=15.735<-10951 Statuses=0009 0009 08:14:25 Msec=750 True Az=117.51 Ze=15.735 Az status=0009 Ze status=0009 08:14:26 Check angles 08:14:26 SkyScan query 08:14:26 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.595<-12373 Statuses=0009 0009 08:14:26 Msec=1500 True Az=99.69 Ze=-5.595 Az status=0009 Ze status=0009 08:14:26 Check angles 08:14:26 SkyScan query 08:14:27 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.55<-13770 Statuses=0009 0009 08:14:27 Msec=2250 True Az=82.2 Ze=-26.55 Az status=0009 Ze status=0009 08:14:27 Check angles 08:14:27 SkyScan query 08:14:28 SkyScan query done: ret=0 az=64.665<-4311 ze=-38.565<-14571 Statuses=0009 0008 08:14:28 Msec=3000 True Az=64.665 Ze=-38.565 Az status=0009 Ze status=0008 08:14:28 Check angles 08:14:28 SkyScan query 08:14:28 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.535<-14569 Statuses=0009 0008 08:14:28 Msec=3750 True Az=47.19 Ze=-38.535 Az status=0009 Ze status=0008 08:14:29 Check angles 08:14:29 SkyScan query 08:14:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:14:29 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:14:29 Message to Master queued w/err=0: serial=110298 error=0 08:14:34 Received message from Master: op=Filter serial=110299 08:14:34 Color wheel filter change from 0 to 0 08:14:34 FLIGetFilterPos err=0 currentPosition=0 08:14:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:34 Filter is already there-color wheel unchanged 08:14:34 Received message from Master: op=Shutter serial=110300 08:14:34 Shutter LASER close 08:14:34 Received message from Camera: op=State serial=110302 08:14:34 GetSingleValue result=40 Value=cccccccc 08:14:34 SkyScan query 08:14:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:14:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:35 Parameters OK 08:14:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:35 Set A/D data flow result=40 08:14:35 Set A/D channel type result=40 08:14:35 Set A/D encoding result=40 08:14:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:35 Set channel filter=0.000000e+000 result=40 08:14:35 Config A/D Result=40 08:14:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:35 Get A/D filter: -9.255963e+061 result=40 08:14:35 Get A/D value=-858993460 result=40 08:14:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:35 Parameters OK 08:14:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:35 Set A/D data flow result=40 08:14:35 Set A/D channel type result=40 08:14:35 Set A/D encoding result=40 08:14:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:35 Set channel filter=0.000000e+000 result=40 08:14:35 Config A/D Result=40 08:14:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:35 Get A/D filter: -9.255963e+061 result=40 08:14:35 Get A/D value=-858993460 result=40 08:14:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:35 Aux= 08:14:35 Message to Camera, serial 110302 queued 08:15:12 Received message from Master: op=PointingHead serial=110315 08:15:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:15:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:15:12 Point started: ret=0 08:15:12 point_skyscan result=0 08:15:13 Check angles 08:15:13 SkyScan query 08:15:13 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.055<-16537 Statuses=0009 0009 08:15:13 Msec=0 True Az=63.87 Ze=-68.055 Az status=0009 Ze status=0009 08:15:14 Check angles 08:15:14 SkyScan query 08:15:14 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.535<-17969 Statuses=0009 0009 08:15:14 Msec=750 True Az=81.555 Ze=-89.535 Az status=0009 Ze status=0009 08:15:14 Check angles 08:15:14 SkyScan query 08:15:15 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.475<-19365 Statuses=0009 0009 08:15:15 Msec=1500 True Az=99.18 Ze=-110.475 Az status=0009 Ze status=0009 08:15:15 Check angles 08:15:15 SkyScan query 08:15:16 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.4<-20760 Statuses=0009 0009 08:15:16 Msec=2250 True Az=116.64 Ze=-131.4 Az status=0009 Ze status=0009 08:15:16 Check angles 08:15:16 SkyScan query 08:15:16 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.555<-21437 Statuses=0009 0008 08:15:16 Msec=3000 True Az=131.145 Ze=-141.555 Az status=0009 Ze status=0008 08:15:17 Check angles 08:15:17 SkyScan query 08:15:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 08:15:17 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 08:15:17 Message to Master queued w/err=0: serial=110315 error=0 08:15:22 Received message from Master: op=Filter serial=110316 08:15:22 Color wheel filter change from 0 to 0 08:15:22 FLIGetFilterPos err=0 currentPosition=0 08:15:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:22 Filter is already there-color wheel unchanged 08:15:22 Received message from Master: op=Shutter serial=110317 08:15:22 Shutter LASER close 08:15:22 Received message from Camera: op=State serial=110319 08:15:22 GetSingleValue result=40 Value=cccccccc 08:15:22 SkyScan query 08:15:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:15:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:23 Parameters OK 08:15:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:23 Set A/D data flow result=40 08:15:23 Set A/D channel type result=40 08:15:23 Set A/D encoding result=40 08:15:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:23 Set channel filter=0.000000e+000 result=40 08:15:23 Config A/D Result=40 08:15:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:23 Get A/D filter: -9.255963e+061 result=40 08:15:23 Get A/D value=-858993460 result=40 08:15:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:23 Parameters OK 08:15:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:23 Set A/D data flow result=40 08:15:23 Set A/D channel type result=40 08:15:23 Set A/D encoding result=40 08:15:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:23 Set channel filter=0.000000e+000 result=40 08:15:23 Config A/D Result=40 08:15:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:23 Get A/D filter: -9.255963e+061 result=40 08:15:23 Get A/D value=-858993460 result=40 08:15:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-13 08:15:23] 08:15:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:23 Aux= 08:15:23 Message to Camera, serial 110319 queued 08:15:27 Received message from Master: op=Identify serial=110320 [UTC 2018-12-13 08:15:52] 08:16:00 Received message from Master: op=PointingHead serial=110335 08:16:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:16:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:16:00 Point started: ret=0 08:16:00 point_skyscan result=0 08:16:01 Check angles 08:16:01 SkyScan query 08:16:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 08:16:01 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 08:16:02 Check angles 08:16:02 SkyScan query 08:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:16:02 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:16:02 Message to Master queued w/err=0: serial=110335 error=0 08:16:07 Received message from Master: op=Filter serial=110336 08:16:07 Color wheel filter change from 0 to 0 08:16:07 FLIGetFilterPos err=0 currentPosition=0 08:16:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:07 Filter is already there-color wheel unchanged 08:16:07 Received message from Master: op=Shutter serial=110337 08:16:07 Shutter LASER open 08:16:08 Received message from Camera: op=State serial=110339 08:16:08 GetSingleValue result=40 Value=cccccccc 08:16:08 SkyScan query 08:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:16:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:08 Parameters OK 08:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:08 Set A/D data flow result=40 08:16:08 Set A/D channel type result=40 08:16:08 Set A/D encoding result=40 08:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:08 Set channel filter=0.000000e+000 result=40 08:16:08 Config A/D Result=40 08:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:08 Get A/D filter: -9.255963e+061 result=40 08:16:08 Get A/D value=-858993460 result=40 08:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:08 Parameters OK 08:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:08 Set A/D data flow result=40 08:16:08 Set A/D channel type result=40 08:16:08 Set A/D encoding result=40 08:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:08 Set channel filter=0.000000e+000 result=40 08:16:08 Config A/D Result=40 08:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:08 Get A/D filter: -9.255963e+061 result=40 08:16:08 Get A/D value=-858993460 result=40 08:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:08 Aux= 08:16:08 Message to Camera, serial 110339 queued 08:16:17 Received message from Master: op=Shutter serial=110349 08:16:17 Shutter LASER close 08:16:17 Received message from Master: op=PointingHead serial=110353 08:16:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:16:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:16:18 Point started: ret=0 08:16:18 point_skyscan result=0 08:16:18 Check angles 08:16:18 SkyScan query 08:16:19 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.145<-21543 Statuses=0009 0009 08:16:19 Msec=0 True Az=135.975 Ze=-143.145 Az status=0009 Ze status=0009 08:16:19 Check angles 08:16:19 SkyScan query 08:16:20 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.19<-20146 Statuses=0009 0009 08:16:20 Msec=750 True Az=153.45 Ze=-122.19 Az status=0009 Ze status=0009 08:16:20 Check angles 08:16:20 SkyScan query 08:16:20 SkyScan query done: ret=0 az=171.315<-11421 ze=-100.71<-18714 Statuses=0009 0009 08:16:20 Msec=1500 True Az=171.315 Ze=-100.71 Az status=0009 Ze status=0009 08:16:21 Check angles 08:16:21 SkyScan query 08:16:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.89<-17326 Statuses=0008 0009 08:16:21 Msec=2250 True Az=176.01 Ze=-79.89 Az status=0008 Ze status=0009 08:16:21 Check angles 08:16:21 SkyScan query 08:16:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.89<-15926 Statuses=0008 0009 08:16:22 Msec=3000 True Az=176.01 Ze=-58.89 Az status=0008 Ze status=0009 08:16:22 Check angles 08:16:22 SkyScan query 08:16:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 08:16:23 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 08:16:23 Message to Master queued w/err=0: serial=110353 error=0 08:16:28 Received message from Master: op=Filter serial=110354 08:16:28 Color wheel filter change from 0 to 0 08:16:28 FLIGetFilterPos err=0 currentPosition=0 08:16:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:28 Filter is already there-color wheel unchanged 08:16:28 Received message from Master: op=Shutter serial=110355 08:16:28 Shutter LASER close 08:16:28 Received message from Camera: op=State serial=110357 08:16:28 GetSingleValue result=40 Value=cccccccc 08:16:28 SkyScan query 08:16:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:16:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:29 Parameters OK 08:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:29 Set A/D data flow result=40 08:16:29 Set A/D channel type result=40 08:16:29 Set A/D encoding result=40 08:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:29 Set channel filter=0.000000e+000 result=40 08:16:29 Config A/D Result=40 08:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:29 Get A/D filter: -9.255963e+061 result=40 08:16:29 Get A/D value=-858993460 result=40 08:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:29 Parameters OK 08:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:29 Set A/D data flow result=40 08:16:29 Set A/D channel type result=40 08:16:29 Set A/D encoding result=40 08:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:29 Set channel filter=0.000000e+000 result=40 08:16:29 Config A/D Result=40 08:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:29 Get A/D filter: -9.255963e+061 result=40 08:16:29 Get A/D value=-858993460 result=40 08:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:29 Aux= 08:16:29 Message to Camera, serial 110357 queued 08:17:05 Received message from Master: op=PointingHead serial=110370 08:17:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:17:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:17:06 Point started: ret=0 08:17:06 point_skyscan result=0 08:17:06 Check angles 08:17:06 SkyScan query 08:17:07 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.555<-13437 Statuses=0009 0009 08:17:07 Msec=0 True Az=152.76 Ze=-21.555 Az status=0009 Ze status=0009 08:17:07 Check angles 08:17:07 SkyScan query 08:17:08 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.57<-12038 Statuses=0009 0009 08:17:08 Msec=750 True Az=135.405 Ze=-0.57 Az status=0009 Ze status=0009 08:17:08 Check angles 08:17:08 SkyScan query 08:17:09 SkyScan query done: ret=0 az=117.765<-7851 ze=20.355<-10643 Statuses=0009 0009 08:17:09 Msec=1500 True Az=117.765 Ze=20.355 Az status=0009 Ze status=0009 08:17:09 Check angles 08:17:09 SkyScan query 08:17:09 SkyScan query done: ret=0 az=100.38<-6692 ze=41.325<-9245 Statuses=0009 0009 08:17:09 Msec=2250 True Az=100.38 Ze=41.325 Az status=0009 Ze status=0009 08:17:09 Check angles 08:17:09 SkyScan query 08:17:10 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 08:17:10 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 08:17:10 Check angles 08:17:10 SkyScan query 08:17:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:17:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:17:11 Message to Master queued w/err=0: serial=110370 error=0 08:17:16 Received message from Master: op=Filter serial=110371 08:17:16 Color wheel filter change from 0 to 0 08:17:16 FLIGetFilterPos err=0 currentPosition=0 08:17:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:16 Filter is already there-color wheel unchanged 08:17:16 Received message from Master: op=Shutter serial=110372 08:17:16 Shutter LASER close 08:17:16 Received message from Camera: op=State serial=110374 08:17:16 GetSingleValue result=40 Value=cccccccc 08:17:16 SkyScan query 08:17:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:17:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:17 Parameters OK 08:17:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:17 Set A/D data flow result=40 08:17:17 Set A/D channel type result=40 08:17:17 Set A/D encoding result=40 08:17:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:17 Set channel filter=0.000000e+000 result=40 08:17:17 Config A/D Result=40 08:17:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:17 Get A/D filter: -9.255963e+061 result=40 08:17:17 Get A/D value=-858993460 result=40 08:17:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:17 Parameters OK 08:17:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:17 Set A/D data flow result=40 08:17:17 Set A/D channel type result=40 08:17:17 Set A/D encoding result=40 08:17:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:17 Set channel filter=0.000000e+000 result=40 08:17:17 Config A/D Result=40 08:17:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:17 Get A/D filter: -9.255963e+061 result=40 08:17:17 Get A/D value=-858993460 result=40 08:17:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:17 Aux= 08:17:17 Message to Camera, serial 110374 queued 08:17:53 Received message from Master: op=PointingHead serial=110387 08:17:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:17:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:17:54 Point started: ret=0 08:17:54 point_skyscan result=0 08:17:55 Check angles 08:17:55 SkyScan query 08:17:55 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 08:17:55 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 08:17:55 Check angles 08:17:55 SkyScan query 08:17:56 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 08:17:56 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 08:17:56 Check angles 08:17:56 SkyScan query 08:17:57 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 08:17:57 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 08:17:57 Check angles 08:17:57 SkyScan query 08:17:57 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 08:17:57 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 08:17:58 Check angles 08:17:58 SkyScan query 08:17:58 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:17:58 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:17:58 Check angles 08:17:58 SkyScan query 08:17:59 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:17:59 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:17:59 Message to Master queued w/err=0: serial=110387 error=0 08:18:04 Received message from Master: op=Filter serial=110388 08:18:04 Color wheel filter change from 0 to 0 08:18:04 FLIGetFilterPos err=0 currentPosition=0 08:18:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:04 Filter is already there-color wheel unchanged 08:18:04 Received message from Master: op=Shutter serial=110389 08:18:04 Shutter LASER close 08:18:04 Received message from Camera: op=State serial=110391 08:18:04 GetSingleValue result=40 Value=cccccccc 08:18:04 SkyScan query 08:18:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:18:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:05 Parameters OK 08:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:05 Set A/D data flow result=40 08:18:05 Set A/D channel type result=40 08:18:05 Set A/D encoding result=40 08:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:05 Set channel filter=0.000000e+000 result=40 08:18:05 Config A/D Result=40 08:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:05 Get A/D filter: -9.255963e+061 result=40 08:18:05 Get A/D value=-858993460 result=40 08:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:05 Parameters OK 08:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:05 Set A/D data flow result=40 08:18:05 Set A/D channel type result=40 08:18:05 Set A/D encoding result=40 08:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:05 Set channel filter=0.000000e+000 result=40 08:18:05 Config A/D Result=40 08:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:05 Get A/D filter: -9.255963e+061 result=40 08:18:05 Get A/D value=-858993460 result=40 08:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:05 Aux= 08:18:05 Message to Camera, serial 110391 queued 08:18:42 Received message from Master: op=PointingHead serial=110404 08:18:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:18:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:18:42 Point started: ret=0 08:18:42 point_skyscan result=0 08:18:43 Check angles 08:18:43 SkyScan query 08:18:43 SkyScan query done: ret=0 az=153.09<-10206 ze=8.805<-11413 Statuses=0009 0009 08:18:43 Msec=0 True Az=153.09 Ze=8.805 Az status=0009 Ze status=0009 08:18:43 Check angles 08:18:43 SkyScan query 08:18:44 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.57<-12838 Statuses=0009 0009 08:18:44 Msec=750 True Az=135.105 Ze=-12.57 Az status=0009 Ze status=0009 08:18:44 Check angles 08:18:44 SkyScan query 08:18:45 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.525<-14235 Statuses=0009 0009 08:18:45 Msec=1500 True Az=117.735 Ze=-33.525 Az status=0009 Ze status=0009 08:18:45 Check angles 08:18:45 SkyScan query 08:18:45 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 08:18:45 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 08:18:46 Check angles 08:18:46 SkyScan query 08:18:46 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:18:46 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:18:46 Check angles 08:18:46 SkyScan query 08:18:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:18:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:18:47 Message to Master queued w/err=0: serial=110404 error=0 08:18:52 Received message from Master: op=Filter serial=110405 08:18:52 Color wheel filter change from 0 to 0 08:18:52 FLIGetFilterPos err=0 currentPosition=0 08:18:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:52 Filter is already there-color wheel unchanged 08:18:52 Received message from Master: op=Shutter serial=110406 08:18:52 Shutter LASER close 08:18:52 Received message from Camera: op=State serial=110408 08:18:52 GetSingleValue result=40 Value=cccccccc 08:18:52 SkyScan query 08:18:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:18:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:53 Parameters OK 08:18:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:53 Set A/D data flow result=40 08:18:53 Set A/D channel type result=40 08:18:53 Set A/D encoding result=40 08:18:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:53 Set channel filter=0.000000e+000 result=40 08:18:53 Config A/D Result=40 08:18:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:53 Get A/D filter: -9.255963e+061 result=40 08:18:53 Get A/D value=-858993460 result=40 08:18:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:53 Parameters OK 08:18:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:53 Set A/D data flow result=40 08:18:53 Set A/D channel type result=40 08:18:53 Set A/D encoding result=40 08:18:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:53 Set channel filter=0.000000e+000 result=40 08:18:53 Config A/D Result=40 08:18:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:53 Get A/D filter: -9.255963e+061 result=40 08:18:53 Get A/D value=-858993460 result=40 08:18:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:53 Aux= 08:18:53 Message to Camera, serial 110408 queued 08:19:30 Received message from Master: op=PointingHead serial=110421 08:19:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:19:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:19:30 Point started: ret=0 08:19:30 point_skyscan result=0 08:19:31 Check angles 08:19:31 SkyScan query 08:19:31 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.255<-17417 Statuses=0009 0009 08:19:31 Msec=0 True Az=108.93 Ze=-81.255 Az status=0009 Ze status=0009 08:19:32 Check angles 08:19:32 SkyScan query 08:19:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 08:19:32 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 08:19:32 Check angles 08:19:32 SkyScan query 08:19:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 08:19:33 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 08:19:33 Check angles 08:19:33 SkyScan query 08:19:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.12<-21608 Statuses=0008 0009 08:19:34 Msec=2250 True Az=112.995 Ze=-144.12 Az status=0008 Ze status=0009 08:19:34 Check angles 08:19:34 SkyScan query 08:19:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 08:19:34 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 08:19:35 Check angles 08:19:35 SkyScan query 08:19:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:19:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:19:35 Message to Master queued w/err=0: serial=110421 error=0 08:19:40 Received message from Master: op=Filter serial=110422 08:19:40 Color wheel filter change from 0 to 0 08:19:40 FLIGetFilterPos err=0 currentPosition=0 08:19:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:40 Filter is already there-color wheel unchanged 08:19:40 Received message from Master: op=Shutter serial=110423 08:19:40 Shutter LASER open 08:19:40 Received message from Camera: op=State serial=110425 08:19:40 GetSingleValue result=40 Value=cccccccc 08:19:40 SkyScan query 08:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:19:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:41 Parameters OK 08:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:41 Set A/D data flow result=40 08:19:41 Set A/D channel type result=40 08:19:41 Set A/D encoding result=40 08:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:41 Set channel filter=0.000000e+000 result=40 08:19:41 Config A/D Result=40 08:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:41 Get A/D filter: -9.255963e+061 result=40 08:19:41 Get A/D value=-858993460 result=40 08:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:41 Parameters OK 08:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:41 Set A/D data flow result=40 08:19:41 Set A/D channel type result=40 08:19:41 Set A/D encoding result=40 08:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:41 Set channel filter=0.000000e+000 result=40 08:19:41 Config A/D Result=40 08:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:41 Get A/D filter: -9.255963e+061 result=40 08:19:41 Get A/D value=-858993460 result=40 08:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:41 Aux= 08:19:41 Message to Camera, serial 110425 queued 08:19:49 Received message from Master: op=Shutter serial=110435 08:19:49 Shutter LASER close 08:19:50 Received message from Master: op=PointingHead serial=110439 08:19:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:19:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:19:50 Point started: ret=0 08:19:50 point_skyscan result=0 08:19:51 Check angles 08:19:51 SkyScan query 08:19:52 SkyScan query done: ret=0 az=89.88<-5992 ze=157.335<-1511 Statuses=0009 0009 08:19:52 Msec=0 True Az=89.88 Ze=157.335 Az status=0009 Ze status=0009 08:19:52 Check angles 08:19:52 SkyScan query 08:19:52 SkyScan query done: ret=0 az=72.33<-4822 ze=136.35<-2910 Statuses=0009 0009 08:19:52 Msec=750 True Az=72.33 Ze=136.35 Az status=0009 Ze status=0009 08:19:53 Check angles 08:19:53 SkyScan query 08:19:53 SkyScan query done: ret=0 az=54.75<-3650 ze=114.975<-4335 Statuses=0009 0009 08:19:53 Msec=1500 True Az=54.75 Ze=114.975 Az status=0009 Ze status=0009 08:19:53 Check angles 08:19:53 SkyScan query 08:19:54 SkyScan query done: ret=0 az=40.95<-2730 ze=93.585<-5761 Statuses=0009 0009 08:19:54 Msec=2250 True Az=40.95 Ze=93.585 Az status=0009 Ze status=0009 08:19:54 Check angles 08:19:54 SkyScan query 08:19:55 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 08:19:55 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 08:19:55 Check angles 08:19:55 SkyScan query 08:19:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 08:19:55 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 08:19:56 Check angles 08:19:56 SkyScan query 08:19:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:19:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:19:56 Message to Master queued w/err=0: serial=110439 error=0 08:20:01 Received message from Master: op=Filter serial=110440 08:20:01 Color wheel filter change from 0 to 0 08:20:01 FLIGetFilterPos err=0 currentPosition=0 08:20:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:01 Filter is already there-color wheel unchanged 08:20:01 Received message from Master: op=Shutter serial=110441 08:20:01 Shutter LASER close 08:20:01 Received message from Camera: op=State serial=110443 08:20:01 GetSingleValue result=40 Value=cccccccc 08:20:01 SkyScan query 08:20:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:20:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:02 Parameters OK 08:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:02 Set A/D data flow result=40 08:20:02 Set A/D channel type result=40 08:20:02 Set A/D encoding result=40 08:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:02 Set channel filter=0.000000e+000 result=40 08:20:02 Config A/D Result=40 08:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:02 Get A/D filter: -9.255963e+061 result=40 08:20:02 Get A/D value=-858993460 result=40 08:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:02 Parameters OK 08:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:02 Set A/D data flow result=40 08:20:02 Set A/D channel type result=40 08:20:02 Set A/D encoding result=40 08:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:02 Set channel filter=0.000000e+000 result=40 08:20:02 Config A/D Result=40 08:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:02 Get A/D filter: -9.255963e+061 result=40 08:20:02 Get A/D value=-858993460 result=40 08:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:02 Aux= 08:20:02 Message to Camera, serial 110443 queued 08:20:39 Received message from Master: op=PointingHead serial=110456 08:20:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:20:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:20:39 Point started: ret=0 08:20:39 point_skyscan result=0 08:20:40 Check angles 08:20:40 SkyScan query 08:20:41 SkyScan query done: ret=0 az=64.035<-4269 ze=66.54<-7564 Statuses=0009 0008 08:20:41 Msec=0 True Az=64.035 Ze=66.54 Az status=0009 Ze status=0008 08:20:41 Check angles 08:20:41 SkyScan query 08:20:41 SkyScan query done: ret=0 az=81.405<-5427 ze=66.495<-7567 Statuses=0009 0008 08:20:41 Msec=750 True Az=81.405 Ze=66.495 Az status=0009 Ze status=0008 08:20:41 Check angles 08:20:41 SkyScan query 08:20:42 SkyScan query done: ret=0 az=98.97<-6598 ze=66.495<-7567 Statuses=0009 0008 08:20:42 Msec=1500 True Az=98.97 Ze=66.495 Az status=0009 Ze status=0008 08:20:42 Check angles 08:20:42 SkyScan query 08:20:43 SkyScan query done: ret=0 az=116.505<-7767 ze=66.495<-7567 Statuses=0009 0008 08:20:43 Msec=2250 True Az=116.505 Ze=66.495 Az status=0009 Ze status=0008 08:20:43 Check angles 08:20:43 SkyScan query 08:20:44 SkyScan query done: ret=0 az=134.055<-8937 ze=66.495<-7567 Statuses=0009 0008 08:20:44 Msec=3000 True Az=134.055 Ze=66.495 Az status=0009 Ze status=0008 08:20:44 Check angles 08:20:44 SkyScan query 08:20:44 SkyScan query done: ret=0 az=151.38<-10092 ze=66.495<-7567 Statuses=0009 0008 08:20:44 Msec=3750 True Az=151.38 Ze=66.495 Az status=0009 Ze status=0008 08:20:44 Check angles 08:20:44 SkyScan query 08:20:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:20:45 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:20:45 Message to Master queued w/err=0: serial=110456 error=0 08:20:50 Received message from Master: op=Filter serial=110457 08:20:50 Color wheel filter change from 0 to 0 08:20:50 FLIGetFilterPos err=0 currentPosition=0 08:20:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:50 Filter is already there-color wheel unchanged 08:20:50 Received message from Master: op=Shutter serial=110458 08:20:50 Shutter LASER close 08:20:50 Received message from Camera: op=State serial=110460 08:20:50 GetSingleValue result=40 Value=cccccccc 08:20:50 SkyScan query 08:20:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:20:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:51 Parameters OK 08:20:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:51 Set A/D data flow result=40 08:20:51 Set A/D channel type result=40 08:20:51 Set A/D encoding result=40 08:20:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:51 Set channel filter=0.000000e+000 result=40 08:20:51 Config A/D Result=40 08:20:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:51 Get A/D filter: -9.255963e+061 result=40 08:20:51 Get A/D value=-858993460 result=40 08:20:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:51 Parameters OK 08:20:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:51 Set A/D data flow result=40 08:20:51 Set A/D channel type result=40 08:20:51 Set A/D encoding result=40 08:20:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:51 Set channel filter=0.000000e+000 result=40 08:20:51 Config A/D Result=40 08:20:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:51 Get A/D filter: -9.255963e+061 result=40 08:20:51 Get A/D value=-858993460 result=40 08:20:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:51 Aux= 08:20:51 Message to Camera, serial 110460 queued 08:21:28 Received message from Master: op=PointingHead serial=110473 08:21:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:21:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:21:28 Point started: ret=0 08:21:28 point_skyscan result=0 08:21:29 Check angles 08:21:29 SkyScan query 08:21:29 SkyScan query done: ret=0 az=134.895<-8993 ze=36.585<-9561 Statuses=0009 0009 08:21:29 Msec=0 True Az=134.895 Ze=36.585 Az status=0009 Ze status=0009 08:21:29 Check angles 08:21:29 SkyScan query 08:21:30 SkyScan query done: ret=0 az=117.42<-7828 ze=15.66<-10956 Statuses=0009 0009 08:21:30 Msec=750 True Az=117.42 Ze=15.66 Az status=0009 Ze status=0009 08:21:30 Check angles 08:21:30 SkyScan query 08:21:31 SkyScan query done: ret=0 az=100.05<-6670 ze=-5.325<-12355 Statuses=0009 0009 08:21:31 Msec=1500 True Az=100.05 Ze=-5.325 Az status=0009 Ze status=0009 08:21:31 Check angles 08:21:31 SkyScan query 08:21:32 SkyScan query done: ret=0 az=82.515<-5501 ze=-26.25<-13750 Statuses=0009 0009 08:21:32 Msec=2250 True Az=82.515 Ze=-26.25 Az status=0009 Ze status=0009 08:21:32 Check angles 08:21:32 SkyScan query 08:21:32 SkyScan query done: ret=0 az=65.01<-4334 ze=-38.565<-14571 Statuses=0009 0008 08:21:32 Msec=3000 True Az=65.01 Ze=-38.565 Az status=0009 Ze status=0008 08:21:32 Check angles 08:21:32 SkyScan query 08:21:33 SkyScan query done: ret=0 az=47.52<-3168 ze=-38.535<-14569 Statuses=0009 0008 08:21:33 Msec=3750 True Az=47.52 Ze=-38.535 Az status=0009 Ze status=0008 08:21:33 Check angles 08:21:33 SkyScan query 08:21:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:21:34 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:21:34 Message to Master queued w/err=0: serial=110473 error=0 08:21:39 Received message from Master: op=Filter serial=110474 08:21:39 Color wheel filter change from 0 to 0 08:21:39 FLIGetFilterPos err=0 currentPosition=0 08:21:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:39 Filter is already there-color wheel unchanged 08:21:39 Received message from Master: op=Shutter serial=110475 08:21:39 Shutter LASER close 08:21:39 Received message from Camera: op=State serial=110477 08:21:39 GetSingleValue result=40 Value=cccccccc 08:21:39 SkyScan query 08:21:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:21:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:40 Parameters OK 08:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:40 Set A/D data flow result=40 08:21:40 Set A/D channel type result=40 08:21:40 Set A/D encoding result=40 08:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:40 Set channel filter=0.000000e+000 result=40 08:21:40 Config A/D Result=40 08:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:40 Get A/D filter: -9.255963e+061 result=40 08:21:40 Get A/D value=-858993460 result=40 08:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:40 Parameters OK 08:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:40 Set A/D data flow result=40 08:21:40 Set A/D channel type result=40 08:21:40 Set A/D encoding result=40 08:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:40 Set channel filter=0.000000e+000 result=40 08:21:40 Config A/D Result=40 08:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:40 Get A/D filter: -9.255963e+061 result=40 08:21:40 Get A/D value=-858993460 result=40 08:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:40 Aux= 08:21:40 Message to Camera, serial 110477 queued 08:22:16 Received message from Master: op=PointingHead serial=110490 08:22:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:22:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:22:17 Point started: ret=0 08:22:17 point_skyscan result=0 08:22:18 Check angles 08:22:18 SkyScan query 08:22:18 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.43<-16562 Statuses=0009 0009 08:22:18 Msec=0 True Az=64.08 Ze=-68.43 Az status=0009 Ze status=0009 08:22:18 Check angles 08:22:18 SkyScan query 08:22:19 SkyScan query done: ret=0 az=81.915<-5461 ze=-89.85<-17990 Statuses=0009 0009 08:22:19 Msec=750 True Az=81.915 Ze=-89.85 Az status=0009 Ze status=0009 08:22:19 Check angles 08:22:19 SkyScan query 08:22:20 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.805<-19387 Statuses=0009 0009 08:22:20 Msec=1500 True Az=99.51 Ze=-110.805 Az status=0009 Ze status=0009 08:22:20 Check angles 08:22:20 SkyScan query 08:22:20 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.76<-20784 Statuses=0009 0009 08:22:20 Msec=2250 True Az=116.955 Ze=-131.76 Az status=0009 Ze status=0009 08:22:21 Check angles 08:22:21 SkyScan query 08:22:21 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 08:22:21 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 08:22:21 Check angles 08:22:21 SkyScan query 08:22:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:22:22 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:22:22 Message to Master queued w/err=0: serial=110490 error=0 08:22:27 Received message from Master: op=Filter serial=110491 08:22:27 Color wheel filter change from 0 to 0 08:22:27 FLIGetFilterPos err=0 currentPosition=0 08:22:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:27 Filter is already there-color wheel unchanged 08:22:27 Received message from Master: op=Shutter serial=110492 08:22:27 Shutter LASER close 08:22:27 Received message from Camera: op=State serial=110494 08:22:27 GetSingleValue result=40 Value=cccccccc 08:22:27 SkyScan query 08:22:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:22:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:28 Parameters OK 08:22:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:28 Set A/D data flow result=40 08:22:28 Set A/D channel type result=40 08:22:28 Set A/D encoding result=40 08:22:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:28 Set channel filter=0.000000e+000 result=40 08:22:28 Config A/D Result=40 08:22:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:28 Get A/D filter: -9.255963e+061 result=40 08:22:28 Get A/D value=-858993460 result=40 08:22:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:28 Parameters OK 08:22:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:28 Set A/D data flow result=40 08:22:28 Set A/D channel type result=40 08:22:28 Set A/D encoding result=40 08:22:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:28 Set channel filter=0.000000e+000 result=40 08:22:28 Config A/D Result=40 08:22:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:28 Get A/D filter: -9.255963e+061 result=40 08:22:28 Get A/D value=-858993460 result=40 08:22:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:28 Aux= 08:22:28 Message to Camera, serial 110494 queued 08:23:04 Received message from Master: op=PointingHead serial=110507 08:23:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:23:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:23:05 Point started: ret=0 08:23:05 point_skyscan result=0 08:23:06 Check angles 08:23:06 SkyScan query 08:23:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 08:23:06 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 08:23:06 Check angles 08:23:06 SkyScan query 08:23:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:23:07 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:23:07 Message to Master queued w/err=0: serial=110507 error=0 08:23:12 Received message from Master: op=Filter serial=110508 08:23:12 Color wheel filter change from 0 to 0 08:23:12 FLIGetFilterPos err=0 currentPosition=0 08:23:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:12 Filter is already there-color wheel unchanged 08:23:12 Received message from Master: op=Shutter serial=110509 08:23:12 Shutter LASER open 08:23:12 Received message from Camera: op=State serial=110511 08:23:12 GetSingleValue result=40 Value=cccccccc 08:23:12 SkyScan query 08:23:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:23:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:13 Parameters OK 08:23:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:13 Set A/D data flow result=40 08:23:13 Set A/D channel type result=40 08:23:13 Set A/D encoding result=40 08:23:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:13 Set channel filter=0.000000e+000 result=40 08:23:13 Config A/D Result=40 08:23:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:13 Get A/D filter: -9.255963e+061 result=40 08:23:13 Get A/D value=-858993460 result=40 08:23:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:13 Parameters OK 08:23:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:13 Set A/D data flow result=40 08:23:13 Set A/D channel type result=40 08:23:13 Set A/D encoding result=40 08:23:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:13 Set channel filter=0.000000e+000 result=40 08:23:13 Config A/D Result=40 08:23:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:13 Get A/D filter: -9.255963e+061 result=40 08:23:13 Get A/D value=-858993460 result=40 08:23:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:13 Aux= 08:23:13 Message to Camera, serial 110511 queued 08:23:21 Received message from Master: op=Shutter serial=110521 08:23:21 Shutter LASER close 08:23:22 Received message from Master: op=PointingHead serial=110525 08:23:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:23:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:23:22 Point started: ret=0 08:23:22 point_skyscan result=0 08:23:23 Check angles 08:23:23 SkyScan query 08:23:24 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.4<-21560 Statuses=0009 0009 08:23:24 Msec=0 True Az=135.825 Ze=-143.4 Az status=0009 Ze status=0009 08:23:24 Check angles 08:23:24 SkyScan query 08:23:24 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.43<-20162 Statuses=0009 0009 08:23:24 Msec=750 True Az=153.36 Ze=-122.43 Az status=0009 Ze status=0009 08:23:25 Check angles 08:23:25 SkyScan query 08:23:25 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.535<-18769 Statuses=0009 0009 08:23:25 Msec=1500 True Az=170.79 Ze=-101.535 Az status=0009 Ze status=0009 08:23:25 Check angles 08:23:25 SkyScan query 08:23:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.49<-17366 Statuses=0008 0009 08:23:26 Msec=2250 True Az=176.01 Ze=-80.49 Az status=0008 Ze status=0009 08:23:26 Check angles 08:23:26 SkyScan query 08:23:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.565<-15971 Statuses=0008 0009 08:23:27 Msec=3000 True Az=176.01 Ze=-59.565 Az status=0008 Ze status=0009 08:23:27 Check angles 08:23:27 SkyScan query 08:23:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:23:27 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:23:27 Message to Master queued w/err=0: serial=110525 error=0 08:23:32 Received message from Master: op=Filter serial=110526 08:23:32 Color wheel filter change from 0 to 0 08:23:32 FLIGetFilterPos err=0 currentPosition=0 08:23:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:32 Filter is already there-color wheel unchanged 08:23:33 Received message from Master: op=Shutter serial=110527 08:23:33 Shutter LASER close 08:23:33 Received message from Camera: op=State serial=110529 08:23:33 GetSingleValue result=40 Value=cccccccc 08:23:33 SkyScan query 08:23:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:23:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:33 Parameters OK 08:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:33 Set A/D data flow result=40 08:23:33 Set A/D channel type result=40 08:23:33 Set A/D encoding result=40 08:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:33 Set channel filter=0.000000e+000 result=40 08:23:33 Config A/D Result=40 08:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:33 Get A/D filter: -9.255963e+061 result=40 08:23:33 Get A/D value=-858993460 result=40 08:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:33 Parameters OK 08:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:33 Set A/D data flow result=40 08:23:33 Set A/D channel type result=40 08:23:33 Set A/D encoding result=40 08:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:33 Set channel filter=0.000000e+000 result=40 08:23:33 Config A/D Result=40 08:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:33 Get A/D filter: -9.255963e+061 result=40 08:23:33 Get A/D value=-858993460 result=40 08:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:33 Aux= 08:23:33 Message to Camera, serial 110529 queued 08:24:10 Received message from Master: op=PointingHead serial=110542 08:24:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:24:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:24:10 Point started: ret=0 08:24:10 point_skyscan result=0 08:24:11 Check angles 08:24:11 SkyScan query 08:24:12 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.255<-13417 Statuses=0009 0009 08:24:12 Msec=0 True Az=152.655 Ze=-21.255 Az status=0009 Ze status=0009 08:24:12 Check angles 08:24:12 SkyScan query 08:24:13 SkyScan query done: ret=0 az=134.565<-8971 ze=0.135<-11991 Statuses=0009 0009 08:24:13 Msec=750 True Az=134.565 Ze=0.135 Az status=0009 Ze status=0009 08:24:13 Check angles 08:24:13 SkyScan query 08:24:13 SkyScan query done: ret=0 az=117.21<-7814 ze=21.21<-10586 Statuses=0009 0009 08:24:13 Msec=1500 True Az=117.21 Ze=21.21 Az status=0009 Ze status=0009 08:24:14 Check angles 08:24:14 SkyScan query 08:24:14 SkyScan query done: ret=0 az=99.855<-6657 ze=42.075<-9195 Statuses=0009 0009 08:24:14 Msec=2250 True Az=99.855 Ze=42.075 Az status=0009 Ze status=0009 08:24:14 Check angles 08:24:14 SkyScan query 08:24:15 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:24:15 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:24:15 Check angles 08:24:15 SkyScan query 08:24:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:24:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:24:16 Message to Master queued w/err=0: serial=110542 error=0 08:24:21 Received message from Master: op=Filter serial=110543 08:24:21 Color wheel filter change from 0 to 0 08:24:21 FLIGetFilterPos err=0 currentPosition=0 08:24:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:21 Filter is already there-color wheel unchanged 08:24:21 Received message from Master: op=Shutter serial=110544 08:24:21 Shutter LASER close 08:24:21 Received message from Camera: op=State serial=110546 08:24:21 GetSingleValue result=40 Value=cccccccc 08:24:21 SkyScan query 08:24:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:24:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:21 Parameters OK 08:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:21 Set A/D data flow result=40 08:24:21 Set A/D channel type result=40 08:24:21 Set A/D encoding result=40 08:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:21 Set channel filter=0.000000e+000 result=40 08:24:21 Config A/D Result=40 08:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:21 Get A/D filter: -9.255963e+061 result=40 08:24:21 Get A/D value=-858993460 result=40 08:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:21 Parameters OK 08:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:21 Set A/D data flow result=40 08:24:21 Set A/D channel type result=40 08:24:21 Set A/D encoding result=40 08:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:21 Set channel filter=0.000000e+000 result=40 08:24:21 Config A/D Result=40 08:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:21 Get A/D filter: -9.255963e+061 result=40 08:24:21 Get A/D value=-858993460 result=40 08:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:21 Aux= 08:24:21 Message to Camera, serial 110546 queued 08:24:58 Received message from Master: op=PointingHead serial=110559 08:24:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:24:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:24:59 Point started: ret=0 08:24:59 point_skyscan result=0 08:24:59 Check angles 08:24:59 SkyScan query 08:25:00 SkyScan query done: ret=0 az=109.35<-7290 ze=38.49<-9434 Statuses=0009 0008 08:25:00 Msec=0 True Az=109.35 Ze=38.49 Az status=0009 Ze status=0008 08:25:00 Check angles 08:25:00 SkyScan query 08:25:01 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 08:25:01 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 08:25:01 Check angles 08:25:01 SkyScan query 08:25:01 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 08:25:01 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 08:25:02 Check angles 08:25:02 SkyScan query 08:25:02 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 08:25:02 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 08:25:02 Check angles 08:25:02 SkyScan query 08:25:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:25:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:25:03 Check angles 08:25:03 SkyScan query 08:25:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:25:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:25:04 Message to Master queued w/err=0: serial=110559 error=0 08:25:09 Received message from Master: op=Filter serial=110560 08:25:09 Color wheel filter change from 0 to 0 08:25:09 FLIGetFilterPos err=0 currentPosition=0 08:25:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:09 Filter is already there-color wheel unchanged 08:25:09 Received message from Master: op=Shutter serial=110561 08:25:09 Shutter LASER close 08:25:09 Received message from Camera: op=State serial=110563 08:25:09 GetSingleValue result=40 Value=cccccccc 08:25:09 SkyScan query 08:25:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:25:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:09 Parameters OK 08:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:09 Set A/D data flow result=40 08:25:09 Set A/D channel type result=40 08:25:09 Set A/D encoding result=40 08:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:09 Set channel filter=0.000000e+000 result=40 08:25:09 Config A/D Result=40 08:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:09 Get A/D filter: -9.255963e+061 result=40 08:25:09 Get A/D value=-858993460 result=40 08:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:09 Parameters OK 08:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:09 Set A/D data flow result=40 08:25:09 Set A/D channel type result=40 08:25:09 Set A/D encoding result=40 08:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:09 Set channel filter=0.000000e+000 result=40 08:25:09 Config A/D Result=40 08:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:09 Get A/D filter: -9.255963e+061 result=40 08:25:09 Get A/D value=-858993460 result=40 08:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:09 Aux= 08:25:09 Message to Camera, serial 110563 queued 08:25:46 Received message from Master: op=PointingHead serial=110576 08:25:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:25:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:25:47 Point started: ret=0 08:25:47 point_skyscan result=0 08:25:47 Check angles 08:25:47 SkyScan query 08:25:48 SkyScan query done: ret=0 az=152.58<-10172 ze=8.145<-11457 Statuses=0009 0009 08:25:48 Msec=0 True Az=152.58 Ze=8.145 Az status=0009 Ze status=0009 08:25:48 Check angles 08:25:48 SkyScan query 08:25:49 SkyScan query done: ret=0 az=135.03<-9002 ze=-12.795<-12853 Statuses=0009 0009 08:25:49 Msec=750 True Az=135.03 Ze=-12.795 Az status=0009 Ze status=0009 08:25:49 Check angles 08:25:49 SkyScan query 08:25:50 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.735<-14249 Statuses=0009 0009 08:25:50 Msec=1500 True Az=117.525 Ze=-33.735 Az status=0009 Ze status=0009 08:25:50 Check angles 08:25:50 SkyScan query [UTC 2018-12-13 08:25:50] 08:25:50 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.555<-15437 Statuses=0009 0009 08:25:50 Msec=2250 True Az=100.14 Ze=-51.555 Az status=0009 Ze status=0009 08:25:50 Check angles 08:25:50 SkyScan query 08:25:51 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:25:51 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:25:51 Check angles 08:25:51 SkyScan query 08:25:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:25:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:25:52 Message to Master queued w/err=0: serial=110576 error=0 08:25:57 Received message from Master: op=Filter serial=110577 08:25:57 Color wheel filter change from 0 to 0 08:25:57 FLIGetFilterPos err=0 currentPosition=0 08:25:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:57 Filter is already there-color wheel unchanged 08:25:57 Received message from Master: op=Shutter serial=110578 08:25:57 Shutter LASER close 08:25:57 Received message from Camera: op=State serial=110580 08:25:57 GetSingleValue result=40 Value=cccccccc 08:25:57 SkyScan query 08:25:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:25:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:58 Parameters OK 08:25:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:58 Set A/D data flow result=40 08:25:58 Set A/D channel type result=40 08:25:58 Set A/D encoding result=40 08:25:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:58 Set channel filter=0.000000e+000 result=40 08:25:58 Config A/D Result=40 08:25:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:58 Get A/D filter: -9.255963e+061 result=40 08:25:58 Get A/D value=-858993460 result=40 08:25:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:58 Parameters OK 08:25:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:58 Set A/D data flow result=40 08:25:58 Set A/D channel type result=40 08:25:58 Set A/D encoding result=40 08:25:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:58 Set channel filter=0.000000e+000 result=40 08:25:58 Config A/D Result=40 08:25:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:58 Get A/D filter: -9.255963e+061 result=40 08:25:58 Get A/D value=-858993460 result=40 08:25:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:58 Aux= 08:25:58 Message to Camera, serial 110580 queued 08:26:33 Received message from Master: op=PointingHead serial=110592 08:26:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:26:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:26:34 Point started: ret=0 08:26:34 point_skyscan result=0 08:26:35 Check angles 08:26:35 SkyScan query 08:26:35 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.525<-17435 Statuses=0009 0009 08:26:35 Msec=0 True Az=109.185 Ze=-81.525 Az status=0009 Ze status=0009 08:26:35 Check angles 08:26:35 SkyScan query 08:26:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 08:26:36 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 08:26:36 Check angles 08:26:36 SkyScan query 08:26:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 08:26:37 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 08:26:37 Check angles 08:26:37 SkyScan query 08:26:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 08:26:37 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 08:26:38 Check angles 08:26:38 SkyScan query 08:26:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 08:26:38 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 08:26:38 Check angles 08:26:38 SkyScan query 08:26:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:26:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:26:39 Message to Master queued w/err=0: serial=110592 error=0 08:26:44 Received message from Master: op=Filter serial=110593 08:26:44 Color wheel filter change from 0 to 0 08:26:44 FLIGetFilterPos err=0 currentPosition=0 08:26:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:44 Filter is already there-color wheel unchanged 08:26:44 Received message from Master: op=Shutter serial=110594 08:26:44 Shutter LASER open 08:26:44 Received message from Camera: op=State serial=110596 08:26:44 GetSingleValue result=40 Value=cccccccc 08:26:44 SkyScan query 08:26:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:26:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:45 Parameters OK 08:26:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:45 Set A/D data flow result=40 08:26:45 Set A/D channel type result=40 08:26:45 Set A/D encoding result=40 08:26:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:45 Set channel filter=0.000000e+000 result=40 08:26:45 Config A/D Result=40 08:26:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:45 Get A/D filter: -9.255963e+061 result=40 08:26:45 Get A/D value=-858993460 result=40 08:26:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:45 Parameters OK 08:26:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:45 Set A/D data flow result=40 08:26:45 Set A/D channel type result=40 08:26:45 Set A/D encoding result=40 08:26:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:45 Set channel filter=0.000000e+000 result=40 08:26:45 Config A/D Result=40 08:26:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:45 Get A/D filter: -9.255963e+061 result=40 08:26:45 Get A/D value=-858993460 result=40 08:26:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:45 Aux= 08:26:45 Message to Camera, serial 110596 queued 08:26:53 Received message from Master: op=Shutter serial=110606 08:26:53 Shutter LASER close 08:26:54 Received message from Master: op=PointingHead serial=110610 08:26:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:26:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:26:54 Point started: ret=0 08:26:54 point_skyscan result=0 08:26:55 Check angles 08:26:55 SkyScan query 08:26:55 SkyScan query done: ret=0 az=89.46<-5964 ze=156.72<-1552 Statuses=0009 0009 08:26:55 Msec=0 True Az=89.46 Ze=156.72 Az status=0009 Ze status=0009 08:26:56 Check angles 08:26:56 SkyScan query 08:26:56 SkyScan query done: ret=0 az=71.985<-4799 ze=135.75<-2950 Statuses=0009 0009 08:26:56 Msec=750 True Az=71.985 Ze=135.75 Az status=0009 Ze status=0009 08:26:56 Check angles 08:26:56 SkyScan query 08:26:57 SkyScan query done: ret=0 az=54.72<-3648 ze=114.78<-4348 Statuses=0009 0009 08:26:57 Msec=1500 True Az=54.72 Ze=114.78 Az status=0009 Ze status=0009 08:26:57 Check angles 08:26:57 SkyScan query 08:26:58 SkyScan query done: ret=0 az=40.905<-2727 ze=93.84<-5744 Statuses=0009 0009 08:26:58 Msec=2250 True Az=40.905 Ze=93.84 Az status=0009 Ze status=0009 08:26:58 Check angles 08:26:58 SkyScan query 08:26:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 08:26:58 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 08:26:59 Check angles 08:26:59 SkyScan query 08:26:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 08:26:59 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 08:26:59 Check angles 08:26:59 SkyScan query 08:27:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:27:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:27:00 Message to Master queued w/err=0: serial=110610 error=0 08:27:05 Received message from Master: op=Filter serial=110611 08:27:05 Color wheel filter change from 0 to 0 08:27:05 FLIGetFilterPos err=0 currentPosition=0 08:27:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:05 Filter is already there-color wheel unchanged 08:27:05 Received message from Master: op=Shutter serial=110612 08:27:05 Shutter LASER close 08:27:05 Received message from Camera: op=State serial=110614 08:27:05 GetSingleValue result=40 Value=cccccccc 08:27:05 SkyScan query 08:27:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:06 Parameters OK 08:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:06 Set A/D data flow result=40 08:27:06 Set A/D channel type result=40 08:27:06 Set A/D encoding result=40 08:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:06 Set channel filter=0.000000e+000 result=40 08:27:06 Config A/D Result=40 08:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:06 Get A/D filter: -9.255963e+061 result=40 08:27:06 Get A/D value=-858993460 result=40 08:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:06 Parameters OK 08:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:06 Set A/D data flow result=40 08:27:06 Set A/D channel type result=40 08:27:06 Set A/D encoding result=40 08:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:06 Set channel filter=0.000000e+000 result=40 08:27:06 Config A/D Result=40 08:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:06 Get A/D filter: -9.255963e+061 result=40 08:27:06 Get A/D value=-858993460 result=40 08:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:06 Aux= 08:27:06 Message to Camera, serial 110614 queued 08:27:43 Received message from Master: op=PointingHead serial=110627 08:27:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:27:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:27:43 Point started: ret=0 08:27:43 point_skyscan result=0 08:27:44 Check angles 08:27:44 SkyScan query 08:27:44 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 08:27:44 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 08:27:44 Check angles 08:27:44 SkyScan query 08:27:45 SkyScan query done: ret=0 az=81.585<-5439 ze=66.495<-7567 Statuses=0009 0008 08:27:45 Msec=750 True Az=81.585 Ze=66.495 Az status=0009 Ze status=0008 08:27:45 Check angles 08:27:45 SkyScan query 08:27:46 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 08:27:46 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 08:27:46 Check angles 08:27:46 SkyScan query 08:27:47 SkyScan query done: ret=0 az=117.105<-7807 ze=66.495<-7567 Statuses=0009 0008 08:27:47 Msec=2250 True Az=117.105 Ze=66.495 Az status=0009 Ze status=0008 08:27:47 Check angles 08:27:47 SkyScan query 08:27:47 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 08:27:47 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 08:27:47 Check angles 08:27:47 SkyScan query 08:27:48 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 08:27:48 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 08:27:48 Check angles 08:27:48 SkyScan query 08:27:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:27:49 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:27:49 Message to Master queued w/err=0: serial=110627 error=0 08:27:54 Received message from Master: op=Filter serial=110628 08:27:54 Color wheel filter change from 0 to 0 08:27:54 FLIGetFilterPos err=0 currentPosition=0 08:27:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:54 Filter is already there-color wheel unchanged 08:27:54 Received message from Master: op=Shutter serial=110629 08:27:54 Shutter LASER close 08:27:54 Received message from Camera: op=State serial=110631 08:27:54 GetSingleValue result=40 Value=cccccccc 08:27:54 SkyScan query 08:27:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:27:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:55 Parameters OK 08:27:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:55 Set A/D data flow result=40 08:27:55 Set A/D channel type result=40 08:27:55 Set A/D encoding result=40 08:27:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:55 Set channel filter=0.000000e+000 result=40 08:27:55 Config A/D Result=40 08:27:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:55 Get A/D filter: -9.255963e+061 result=40 08:27:55 Get A/D value=-858993460 result=40 08:27:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:55 Parameters OK 08:27:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:55 Set A/D data flow result=40 08:27:55 Set A/D channel type result=40 08:27:55 Set A/D encoding result=40 08:27:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:55 Set channel filter=0.000000e+000 result=40 08:27:55 Config A/D Result=40 08:27:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:55 Get A/D filter: -9.255963e+061 result=40 08:27:55 Get A/D value=-858993460 result=40 08:27:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:55 Aux= 08:27:55 Message to Camera, serial 110631 queued 08:28:30 Received message from Master: op=PointingHead serial=110643 08:28:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:28:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:28:31 Point started: ret=0 08:28:31 point_skyscan result=0 08:28:32 Check angles 08:28:32 SkyScan query 08:28:32 SkyScan query done: ret=0 az=135.195<-9013 ze=36.945<-9537 Statuses=0009 0009 08:28:32 Msec=0 True Az=135.195 Ze=36.945 Az status=0009 Ze status=0009 08:28:32 Check angles 08:28:32 SkyScan query 08:28:33 SkyScan query done: ret=0 az=117.39<-7826 ze=15.645<-10957 Statuses=0009 0009 08:28:33 Msec=750 True Az=117.39 Ze=15.645 Az status=0009 Ze status=0009 08:28:33 Check angles 08:28:33 SkyScan query 08:28:34 SkyScan query done: ret=0 az=99.99<-6666 ze=-5.355<-12357 Statuses=0009 0009 08:28:34 Msec=1500 True Az=99.99 Ze=-5.355 Az status=0009 Ze status=0009 08:28:34 Check angles 08:28:34 SkyScan query 08:28:34 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.28<-13752 Statuses=0009 0009 08:28:34 Msec=2250 True Az=82.47 Ze=-26.28 Az status=0009 Ze status=0009 08:28:35 Check angles 08:28:35 SkyScan query 08:28:35 SkyScan query done: ret=0 az=64.95<-4330 ze=-38.565<-14571 Statuses=0009 0008 08:28:35 Msec=3000 True Az=64.95 Ze=-38.565 Az status=0009 Ze status=0008 08:28:35 Check angles 08:28:35 SkyScan query 08:28:36 SkyScan query done: ret=0 az=47.49<-3166 ze=-38.535<-14569 Statuses=0009 0008 08:28:36 Msec=3750 True Az=47.49 Ze=-38.535 Az status=0009 Ze status=0008 08:28:36 Check angles 08:28:36 SkyScan query 08:28:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:28:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:28:37 Message to Master queued w/err=0: serial=110643 error=0 08:28:42 Received message from Master: op=Filter serial=110644 08:28:42 Color wheel filter change from 0 to 0 08:28:42 FLIGetFilterPos err=0 currentPosition=0 08:28:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:42 Filter is already there-color wheel unchanged 08:28:42 Received message from Master: op=Shutter serial=110645 08:28:42 Shutter LASER close 08:28:42 Received message from Camera: op=State serial=110647 08:28:42 GetSingleValue result=40 Value=cccccccc 08:28:42 SkyScan query 08:28:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:28:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:42 Parameters OK 08:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:42 Set A/D data flow result=40 08:28:42 Set A/D channel type result=40 08:28:42 Set A/D encoding result=40 08:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:42 Set channel filter=0.000000e+000 result=40 08:28:42 Config A/D Result=40 08:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:42 Get A/D filter: -9.255963e+061 result=40 08:28:42 Get A/D value=-858993460 result=40 08:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:42 Parameters OK 08:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:42 Set A/D data flow result=40 08:28:42 Set A/D channel type result=40 08:28:42 Set A/D encoding result=40 08:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:42 Set channel filter=0.000000e+000 result=40 08:28:42 Config A/D Result=40 08:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:42 Get A/D filter: -9.255963e+061 result=40 08:28:42 Get A/D value=-858993460 result=40 08:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:42 Aux= 08:28:42 Message to Camera, serial 110647 queued 08:29:19 Received message from Master: op=PointingHead serial=110660 08:29:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:29:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:29:20 Point started: ret=0 08:29:20 point_skyscan result=0 08:29:20 Check angles 08:29:20 SkyScan query 08:29:21 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.22<-16548 Statuses=0009 0009 08:29:21 Msec=0 True Az=63.975 Ze=-68.22 Az status=0009 Ze status=0009 08:29:21 Check angles 08:29:21 SkyScan query 08:29:22 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.22<-17948 Statuses=0009 0009 08:29:22 Msec=750 True Az=81.315 Ze=-89.22 Az status=0009 Ze status=0009 08:29:22 Check angles 08:29:22 SkyScan query 08:29:23 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.625<-19375 Statuses=0009 0009 08:29:23 Msec=1500 True Az=99.36 Ze=-110.625 Az status=0009 Ze status=0009 08:29:23 Check angles 08:29:23 SkyScan query 08:29:23 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.55<-20770 Statuses=0009 0009 08:29:23 Msec=2250 True Az=116.865 Ze=-131.55 Az status=0009 Ze status=0009 08:29:23 Check angles 08:29:23 SkyScan query 08:29:24 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.555<-21437 Statuses=0009 0008 08:29:24 Msec=3000 True Az=131.145 Ze=-141.555 Az status=0009 Ze status=0008 08:29:24 Check angles 08:29:24 SkyScan query 08:29:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 08:29:25 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 08:29:25 Message to Master queued w/err=0: serial=110660 error=0 08:29:30 Received message from Master: op=Filter serial=110661 08:29:30 Color wheel filter change from 0 to 0 08:29:30 FLIGetFilterPos err=0 currentPosition=0 08:29:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:30 Filter is already there-color wheel unchanged 08:29:30 Received message from Master: op=Shutter serial=110662 08:29:30 Shutter LASER close 08:29:30 Received message from Camera: op=State serial=110664 08:29:30 GetSingleValue result=40 Value=cccccccc 08:29:30 SkyScan query 08:29:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:29:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:31 Parameters OK 08:29:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:31 Set A/D data flow result=40 08:29:31 Set A/D channel type result=40 08:29:31 Set A/D encoding result=40 08:29:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:31 Set channel filter=0.000000e+000 result=40 08:29:31 Config A/D Result=40 08:29:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:31 Get A/D filter: -9.255963e+061 result=40 08:29:31 Get A/D value=-858993460 result=40 08:29:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:31 Parameters OK 08:29:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:31 Set A/D data flow result=40 08:29:31 Set A/D channel type result=40 08:29:31 Set A/D encoding result=40 08:29:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:31 Set channel filter=0.000000e+000 result=40 08:29:31 Config A/D Result=40 08:29:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:31 Get A/D filter: -9.255963e+061 result=40 08:29:31 Get A/D value=-858993460 result=40 08:29:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:31 Aux= 08:29:31 Message to Camera, serial 110664 queued 08:30:07 Received message from Master: op=PointingHead serial=110677 08:30:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:30:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:30:08 Point started: ret=0 08:30:08 point_skyscan result=0 08:30:08 Check angles 08:30:08 SkyScan query 08:30:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 08:30:09 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 08:30:09 Check angles 08:30:09 SkyScan query 08:30:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:30:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:30:10 Message to Master queued w/err=0: serial=110677 error=0 08:30:15 Received message from Master: op=Filter serial=110678 08:30:15 Color wheel filter change from 0 to 0 08:30:15 FLIGetFilterPos err=0 currentPosition=0 08:30:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:15 Filter is already there-color wheel unchanged 08:30:15 Received message from Master: op=Shutter serial=110679 08:30:15 Shutter LASER open 08:30:15 Received message from Camera: op=State serial=110681 08:30:15 GetSingleValue result=40 Value=cccccccc 08:30:15 SkyScan query 08:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:30:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:16 Parameters OK 08:30:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:16 Set A/D data flow result=40 08:30:16 Set A/D channel type result=40 08:30:16 Set A/D encoding result=40 08:30:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:16 Set channel filter=0.000000e+000 result=40 08:30:16 Config A/D Result=40 08:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:16 Get A/D filter: -9.255963e+061 result=40 08:30:16 Get A/D value=-858993460 result=40 08:30:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:16 Parameters OK 08:30:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:16 Set A/D data flow result=40 08:30:16 Set A/D channel type result=40 08:30:16 Set A/D encoding result=40 08:30:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:16 Set channel filter=0.000000e+000 result=40 08:30:16 Config A/D Result=40 08:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:16 Get A/D filter: -9.255963e+061 result=40 08:30:16 Get A/D value=-858993460 result=40 08:30:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:16 Aux= 08:30:16 Message to Camera, serial 110681 queued 08:30:24 Received message from Master: op=Shutter serial=110691 08:30:24 Shutter LASER close 08:30:25 Received message from Master: op=PointingHead serial=110695 08:30:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:30:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:30:25 Point started: ret=0 08:30:25 point_skyscan result=0 08:30:26 Check angles 08:30:26 SkyScan query 08:30:26 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.905<-21527 Statuses=0009 0009 08:30:26 Msec=0 True Az=136.215 Ze=-142.905 Az status=0009 Ze status=0009 08:30:27 Check angles 08:30:27 SkyScan query 08:30:27 SkyScan query done: ret=0 az=154.095<-10273 ze=-121.545<-20103 Statuses=0009 0009 08:30:27 Msec=750 True Az=154.095 Ze=-121.545 Az status=0009 Ze status=0009 08:30:27 Check angles 08:30:27 SkyScan query 08:30:28 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.485<-18699 Statuses=0009 0009 08:30:28 Msec=1500 True Az=171.57 Ze=-100.485 Az status=0009 Ze status=0009 08:30:28 Check angles 08:30:28 SkyScan query 08:30:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.59<-17306 Statuses=0008 0009 08:30:29 Msec=2250 True Az=176.01 Ze=-79.59 Az status=0008 Ze status=0009 08:30:29 Check angles 08:30:29 SkyScan query 08:30:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 08:30:29 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 08:30:30 Check angles 08:30:30 SkyScan query 08:30:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:30:30 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:30:30 Message to Master queued w/err=0: serial=110695 error=0 08:30:35 Received message from Master: op=Filter serial=110696 08:30:35 Color wheel filter change from 0 to 0 08:30:35 FLIGetFilterPos err=0 currentPosition=0 08:30:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:35 Filter is already there-color wheel unchanged 08:30:35 Received message from Master: op=Shutter serial=110697 08:30:35 Shutter LASER close 08:30:36 Received message from Camera: op=State serial=110699 08:30:36 GetSingleValue result=40 Value=cccccccc 08:30:36 SkyScan query 08:30:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:30:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:36 Parameters OK 08:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:36 Set A/D data flow result=40 08:30:36 Set A/D channel type result=40 08:30:36 Set A/D encoding result=40 08:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:36 Set channel filter=0.000000e+000 result=40 08:30:36 Config A/D Result=40 08:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:36 Get A/D filter: -9.255963e+061 result=40 08:30:36 Get A/D value=-858993460 result=40 08:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:36 Parameters OK 08:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:36 Set A/D data flow result=40 08:30:36 Set A/D channel type result=40 08:30:36 Set A/D encoding result=40 08:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:36 Set channel filter=0.000000e+000 result=40 08:30:36 Config A/D Result=40 08:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:36 Get A/D filter: -9.255963e+061 result=40 08:30:36 Get A/D value=-858993460 result=40 08:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:36 Aux= 08:30:36 Message to Camera, serial 110699 queued 08:31:13 Received message from Master: op=PointingHead serial=110712 08:31:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:31:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:31:13 Point started: ret=0 08:31:13 point_skyscan result=0 08:31:14 Check angles 08:31:14 SkyScan query 08:31:15 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.78<-13452 Statuses=0009 0009 08:31:15 Msec=0 True Az=152.925 Ze=-21.78 Az status=0009 Ze status=0009 08:31:15 Check angles 08:31:15 SkyScan query 08:31:15 SkyScan query done: ret=0 az=135.075<-9005 ze=-0.345<-12023 Statuses=0009 0009 08:31:15 Msec=750 True Az=135.075 Ze=-0.345 Az status=0009 Ze status=0009 08:31:16 Check angles 08:31:16 SkyScan query 08:31:16 SkyScan query done: ret=0 az=117.555<-7837 ze=20.58<-10628 Statuses=0009 0009 08:31:16 Msec=1500 True Az=117.555 Ze=20.58 Az status=0009 Ze status=0009 08:31:16 Check angles 08:31:16 SkyScan query 08:31:17 SkyScan query done: ret=0 az=100.17<-6678 ze=41.55<-9230 Statuses=0009 0009 08:31:17 Msec=2250 True Az=100.17 Ze=41.55 Az status=0009 Ze status=0009 08:31:17 Check angles 08:31:17 SkyScan query 08:31:18 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 08:31:18 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 08:31:18 Check angles 08:31:18 SkyScan query 08:31:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:31:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:31:18 Message to Master queued w/err=0: serial=110712 error=0 08:31:23 Received message from Master: op=Filter serial=110713 08:31:23 Color wheel filter change from 0 to 0 08:31:23 FLIGetFilterPos err=0 currentPosition=0 08:31:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:23 Filter is already there-color wheel unchanged 08:31:24 Received message from Master: op=Shutter serial=110714 08:31:24 Shutter LASER close 08:31:24 Received message from Camera: op=State serial=110716 08:31:24 GetSingleValue result=40 Value=cccccccc 08:31:24 SkyScan query 08:31:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:31:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:24 Parameters OK 08:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:24 Set A/D data flow result=40 08:31:24 Set A/D channel type result=40 08:31:24 Set A/D encoding result=40 08:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:24 Set channel filter=0.000000e+000 result=40 08:31:24 Config A/D Result=40 08:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:24 Get A/D filter: -9.255963e+061 result=40 08:31:24 Get A/D value=-858993460 result=40 08:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:24 Parameters OK 08:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:24 Set A/D data flow result=40 08:31:24 Set A/D channel type result=40 08:31:24 Set A/D encoding result=40 08:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:24 Set channel filter=0.000000e+000 result=40 08:31:24 Config A/D Result=40 08:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:24 Get A/D filter: -9.255963e+061 result=40 08:31:24 Get A/D value=-858993460 result=40 08:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:24 Aux= 08:31:24 Message to Camera, serial 110716 queued 08:32:01 Received message from Master: op=PointingHead serial=110729 08:32:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:32:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:32:01 Point started: ret=0 08:32:01 point_skyscan result=0 08:32:02 Check angles 08:32:02 SkyScan query 08:32:03 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 08:32:03 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 08:32:03 Check angles 08:32:03 SkyScan query 08:32:03 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 08:32:03 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 08:32:04 Check angles 08:32:04 SkyScan query 08:32:04 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 08:32:04 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 08:32:04 Check angles 08:32:04 SkyScan query 08:32:05 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 08:32:05 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 08:32:05 Check angles 08:32:05 SkyScan query 08:32:06 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:32:06 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:32:06 Check angles 08:32:06 SkyScan query 08:32:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:32:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:32:07 Message to Master queued w/err=0: serial=110729 error=0 08:32:12 Received message from Master: op=Filter serial=110730 08:32:12 Color wheel filter change from 0 to 0 08:32:12 FLIGetFilterPos err=0 currentPosition=0 08:32:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:12 Filter is already there-color wheel unchanged 08:32:12 Received message from Master: op=Shutter serial=110731 08:32:12 Shutter LASER close 08:32:12 Received message from Camera: op=State serial=110733 08:32:12 GetSingleValue result=40 Value=cccccccc 08:32:12 SkyScan query 08:32:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:32:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:12 Parameters OK 08:32:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:12 Set A/D data flow result=40 08:32:12 Set A/D channel type result=40 08:32:12 Set A/D encoding result=40 08:32:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:12 Set channel filter=0.000000e+000 result=40 08:32:12 Config A/D Result=40 08:32:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:12 Get A/D filter: -9.255963e+061 result=40 08:32:12 Get A/D value=-858993460 result=40 08:32:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:12 Parameters OK 08:32:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:12 Set A/D data flow result=40 08:32:12 Set A/D channel type result=40 08:32:12 Set A/D encoding result=40 08:32:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:12 Set channel filter=0.000000e+000 result=40 08:32:12 Config A/D Result=40 08:32:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:12 Get A/D filter: -9.255963e+061 result=40 08:32:12 Get A/D value=-858993460 result=40 08:32:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:12 Aux= 08:32:12 Message to Camera, serial 110733 queued 08:32:49 Received message from Master: op=PointingHead serial=110746 08:32:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:32:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:32:49 Point started: ret=0 08:32:49 point_skyscan result=0 08:32:50 Check angles 08:32:50 SkyScan query 08:32:51 SkyScan query done: ret=0 az=152.61<-10174 ze=8.205<-11453 Statuses=0009 0009 08:32:51 Msec=0 True Az=152.61 Ze=8.205 Az status=0009 Ze status=0009 08:32:51 Check angles 08:32:51 SkyScan query 08:32:52 SkyScan query done: ret=0 az=134.655<-8977 ze=-13.185<-12879 Statuses=0009 0009 08:32:52 Msec=750 True Az=134.655 Ze=-13.185 Az status=0009 Ze status=0009 08:32:52 Check angles 08:32:52 SkyScan query 08:32:52 SkyScan query done: ret=0 az=117.18<-7812 ze=-34.26<-14284 Statuses=0009 0009 08:32:52 Msec=1500 True Az=117.18 Ze=-34.26 Az status=0009 Ze status=0009 08:32:53 Check angles 08:32:53 SkyScan query 08:32:53 SkyScan query done: ret=0 az=99.75<-6650 ze=-51.57<-15438 Statuses=0009 0009 08:32:53 Msec=2250 True Az=99.75 Ze=-51.57 Az status=0009 Ze status=0009 08:32:53 Check angles 08:32:53 SkyScan query 08:32:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 08:32:54 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 08:32:54 Check angles 08:32:54 SkyScan query 08:32:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:32:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:32:55 Message to Master queued w/err=0: serial=110746 error=0 08:33:00 Received message from Master: op=Filter serial=110747 08:33:00 Color wheel filter change from 0 to 0 08:33:00 FLIGetFilterPos err=0 currentPosition=0 08:33:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:00 Filter is already there-color wheel unchanged 08:33:00 Received message from Master: op=Shutter serial=110748 08:33:00 Shutter LASER close 08:33:00 Received message from Camera: op=State serial=110750 08:33:00 GetSingleValue result=40 Value=cccccccc 08:33:00 SkyScan query 08:33:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:33:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:00 Parameters OK 08:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:00 Set A/D data flow result=40 08:33:00 Set A/D channel type result=40 08:33:00 Set A/D encoding result=40 08:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:00 Set channel filter=0.000000e+000 result=40 08:33:00 Config A/D Result=40 08:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:00 Get A/D filter: -9.255963e+061 result=40 08:33:00 Get A/D value=-858993460 result=40 08:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:00 Parameters OK 08:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:00 Set A/D data flow result=40 08:33:00 Set A/D channel type result=40 08:33:00 Set A/D encoding result=40 08:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:00 Set channel filter=0.000000e+000 result=40 08:33:00 Config A/D Result=40 08:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:00 Get A/D filter: -9.255963e+061 result=40 08:33:00 Get A/D value=-858993460 result=40 08:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:00 Aux= 08:33:00 Message to Camera, serial 110750 queued 08:33:37 Received message from Master: op=PointingHead serial=110763 08:33:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:33:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:33:38 Point started: ret=0 08:33:38 point_skyscan result=0 08:33:38 Check angles 08:33:38 SkyScan query 08:33:39 SkyScan query done: ret=0 az=108.81<-7254 ze=-80.955<-17397 Statuses=0009 0009 08:33:39 Msec=0 True Az=108.81 Ze=-80.955 Az status=0009 Ze status=0009 08:33:39 Check angles 08:33:39 SkyScan query 08:33:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.925<-18795 Statuses=0008 0009 08:33:40 Msec=750 True Az=112.995 Ze=-101.925 Az status=0008 Ze status=0009 08:33:40 Check angles 08:33:40 SkyScan query 08:33:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 08:33:41 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 08:33:41 Check angles 08:33:41 SkyScan query 08:33:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 08:33:41 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 08:33:41 Check angles 08:33:41 SkyScan query 08:33:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.255<-23017 Statuses=0008 0009 08:33:42 Msec=3000 True Az=112.995 Ze=-165.255 Az status=0008 Ze status=0009 08:33:42 Check angles 08:33:42 SkyScan query 08:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:33:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:33:43 Message to Master queued w/err=0: serial=110763 error=0 08:33:48 Received message from Master: op=Filter serial=110764 08:33:48 Color wheel filter change from 0 to 0 08:33:48 FLIGetFilterPos err=0 currentPosition=0 08:33:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:48 Filter is already there-color wheel unchanged 08:33:48 Received message from Master: op=Shutter serial=110765 08:33:48 Shutter LASER open 08:33:48 Received message from Camera: op=State serial=110767 08:33:48 GetSingleValue result=40 Value=cccccccc 08:33:48 SkyScan query 08:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:33:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:49 Parameters OK 08:33:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:49 Set A/D data flow result=40 08:33:49 Set A/D channel type result=40 08:33:49 Set A/D encoding result=40 08:33:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:49 Set channel filter=0.000000e+000 result=40 08:33:49 Config A/D Result=40 08:33:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:49 Get A/D filter: -9.255963e+061 result=40 08:33:49 Get A/D value=-858993460 result=40 08:33:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:49 Parameters OK 08:33:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:49 Set A/D data flow result=40 08:33:49 Set A/D channel type result=40 08:33:49 Set A/D encoding result=40 08:33:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:49 Set channel filter=0.000000e+000 result=40 08:33:49 Config A/D Result=40 08:33:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:49 Get A/D filter: -9.255963e+061 result=40 08:33:49 Get A/D value=-858993460 result=40 08:33:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:49 Aux= 08:33:49 Message to Camera, serial 110767 queued 08:33:57 Received message from Master: op=Shutter serial=110777 08:33:57 Shutter LASER close 08:33:58 Received message from Master: op=PointingHead serial=110781 08:33:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:33:58 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:33:58 Point started: ret=0 08:33:58 point_skyscan result=0 08:33:59 Check angles 08:33:59 SkyScan query 08:33:59 SkyScan query done: ret=0 az=89.64<-5976 ze=156.93<-1538 Statuses=0009 0009 08:33:59 Msec=0 True Az=89.64 Ze=156.93 Az status=0009 Ze status=0009 08:33:59 Check angles 08:33:59 SkyScan query 08:34:00 SkyScan query done: ret=0 az=72.225<-4815 ze=135.99<-2934 Statuses=0009 0009 08:34:00 Msec=750 True Az=72.225 Ze=135.99 Az status=0009 Ze status=0009 08:34:00 Check angles 08:34:00 SkyScan query 08:34:01 SkyScan query done: ret=0 az=54.54<-3636 ze=114.57<-4362 Statuses=0009 0009 08:34:01 Msec=1500 True Az=54.54 Ze=114.57 Az status=0009 Ze status=0009 08:34:01 Check angles 08:34:01 SkyScan query 08:34:01 SkyScan query done: ret=0 az=40.92<-2728 ze=93.645<-5757 Statuses=0009 0009 08:34:01 Msec=2250 True Az=40.92 Ze=93.645 Az status=0009 Ze status=0009 08:34:02 Check angles 08:34:02 SkyScan query 08:34:02 SkyScan query done: ret=0 az=40.995<-2733 ze=72.675<-7155 Statuses=0008 0009 08:34:02 Msec=3000 True Az=40.995 Ze=72.675 Az status=0008 Ze status=0009 08:34:02 Check angles 08:34:02 SkyScan query 08:34:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 08:34:03 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 08:34:03 Check angles 08:34:03 SkyScan query 08:34:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:34:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:34:04 Message to Master queued w/err=0: serial=110781 error=0 08:34:09 Received message from Master: op=Filter serial=110782 08:34:09 Color wheel filter change from 0 to 0 08:34:09 FLIGetFilterPos err=0 currentPosition=0 08:34:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:09 Filter is already there-color wheel unchanged 08:34:09 Received message from Master: op=Shutter serial=110783 08:34:09 Shutter LASER close 08:34:09 Received message from Camera: op=State serial=110785 08:34:09 GetSingleValue result=40 Value=cccccccc 08:34:09 SkyScan query 08:34:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:34:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:10 Parameters OK 08:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:10 Set A/D data flow result=40 08:34:10 Set A/D channel type result=40 08:34:10 Set A/D encoding result=40 08:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:10 Set channel filter=0.000000e+000 result=40 08:34:10 Config A/D Result=40 08:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:10 Get A/D filter: -9.255963e+061 result=40 08:34:10 Get A/D value=-858993460 result=40 08:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:10 Parameters OK 08:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:10 Set A/D data flow result=40 08:34:10 Set A/D channel type result=40 08:34:10 Set A/D encoding result=40 08:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:10 Set channel filter=0.000000e+000 result=40 08:34:10 Config A/D Result=40 08:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:10 Get A/D filter: -9.255963e+061 result=40 08:34:10 Get A/D value=-858993460 result=40 08:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:10 Aux= 08:34:10 Message to Camera, serial 110785 queued 08:34:46 Received message from Master: op=PointingHead serial=110798 08:34:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:34:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:34:47 Point started: ret=0 08:34:47 point_skyscan result=0 08:34:48 Check angles 08:34:48 SkyScan query 08:34:48 SkyScan query done: ret=0 az=64.44<-4296 ze=66.555<-7563 Statuses=0009 0008 08:34:48 Msec=0 True Az=64.44 Ze=66.555 Az status=0009 Ze status=0008 08:34:48 Check angles 08:34:48 SkyScan query 08:34:49 SkyScan query done: ret=0 az=82.275<-5485 ze=66.495<-7567 Statuses=0009 0008 08:34:49 Msec=750 True Az=82.275 Ze=66.495 Az status=0009 Ze status=0008 08:34:49 Check angles 08:34:49 SkyScan query 08:34:50 SkyScan query done: ret=0 az=99.81<-6654 ze=66.495<-7567 Statuses=0009 0008 08:34:50 Msec=1500 True Az=99.81 Ze=66.495 Az status=0009 Ze status=0008 08:34:50 Check angles 08:34:50 SkyScan query 08:34:50 SkyScan query done: ret=0 az=117.345<-7823 ze=66.495<-7567 Statuses=0009 0008 08:34:50 Msec=2250 True Az=117.345 Ze=66.495 Az status=0009 Ze status=0008 08:34:51 Check angles 08:34:51 SkyScan query 08:34:51 SkyScan query done: ret=0 az=135.075<-9005 ze=66.495<-7567 Statuses=0009 0008 08:34:51 Msec=3000 True Az=135.075 Ze=66.495 Az status=0009 Ze status=0008 08:34:51 Check angles 08:34:51 SkyScan query 08:34:52 SkyScan query done: ret=0 az=152.925<-10195 ze=66.495<-7567 Statuses=0009 0008 08:34:52 Msec=3750 True Az=152.925 Ze=66.495 Az status=0009 Ze status=0008 08:34:52 Check angles 08:34:52 SkyScan query 08:34:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:34:53 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:34:53 Message to Master queued w/err=0: serial=110798 error=0 08:34:58 Received message from Master: op=Filter serial=110799 08:34:58 Color wheel filter change from 0 to 0 08:34:58 FLIGetFilterPos err=0 currentPosition=0 08:34:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:58 Filter is already there-color wheel unchanged 08:34:58 Received message from Master: op=Shutter serial=110800 08:34:58 Shutter LASER close 08:34:58 Received message from Camera: op=State serial=110802 08:34:58 GetSingleValue result=40 Value=cccccccc 08:34:58 SkyScan query 08:34:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:34:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:59 Parameters OK 08:34:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:59 Set A/D data flow result=40 08:34:59 Set A/D channel type result=40 08:34:59 Set A/D encoding result=40 08:34:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:59 Set channel filter=0.000000e+000 result=40 08:34:59 Config A/D Result=40 08:34:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:59 Get A/D filter: -9.255963e+061 result=40 08:34:59 Get A/D value=-858993460 result=40 08:34:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:59 Parameters OK 08:34:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:59 Set A/D data flow result=40 08:34:59 Set A/D channel type result=40 08:34:59 Set A/D encoding result=40 08:34:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:59 Set channel filter=0.000000e+000 result=40 08:34:59 Config A/D Result=40 08:34:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:59 Get A/D filter: -9.255963e+061 result=40 08:34:59 Get A/D value=-858993460 result=40 08:34:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:59 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:59 Aux= 08:34:59 Message to Camera, serial 110802 queued 08:35:35 Received message from Master: op=PointingHead serial=110815 08:35:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:35:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:35:36 Point started: ret=0 08:35:36 point_skyscan result=0 08:35:36 Check angles 08:35:36 SkyScan query 08:35:37 SkyScan query done: ret=0 az=134.67<-8978 ze=36.48<-9568 Statuses=0009 0009 08:35:37 Msec=0 True Az=134.67 Ze=36.48 Az status=0009 Ze status=0009 08:35:37 Check angles 08:35:37 SkyScan query 08:35:38 SkyScan query done: ret=0 az=117.345<-7823 ze=15.54<-10964 Statuses=0009 0009 08:35:38 Msec=750 True Az=117.345 Ze=15.54 Az status=0009 Ze status=0009 08:35:38 Check angles [UTC 2018-12-13 08:35:38] 08:35:38 SkyScan query 08:35:39 SkyScan query done: ret=0 az=98.34<-6556 ze=-7.2<-12480 Statuses=0009 0009 08:35:39 Msec=1500 True Az=98.34 Ze=-7.2 Az status=0009 Ze status=0009 08:35:39 Check angles 08:35:39 SkyScan query 08:35:39 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.355<-13757 Statuses=0009 0009 08:35:39 Msec=2250 True Az=82.44 Ze=-26.355 Az status=0009 Ze status=0009 08:35:39 Check angles 08:35:39 SkyScan query 08:35:40 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.565<-14571 Statuses=0009 0008 08:35:40 Msec=3000 True Az=64.845 Ze=-38.565 Az status=0009 Ze status=0008 08:35:40 Check angles 08:35:40 SkyScan query 08:35:41 SkyScan query done: ret=0 az=47.145<-3143 ze=-38.535<-14569 Statuses=0009 0008 08:35:41 Msec=3750 True Az=47.145 Ze=-38.535 Az status=0009 Ze status=0008 08:35:41 Check angles 08:35:41 SkyScan query 08:35:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:35:42 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:35:42 Message to Master queued w/err=0: serial=110815 error=0 08:35:47 Received message from Master: op=Filter serial=110816 08:35:47 Color wheel filter change from 0 to 0 08:35:47 FLIGetFilterPos err=0 currentPosition=0 08:35:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:47 Filter is already there-color wheel unchanged 08:35:47 Received message from Master: op=Shutter serial=110817 08:35:47 Shutter LASER close 08:35:47 Received message from Camera: op=State serial=110819 08:35:47 GetSingleValue result=40 Value=cccccccc 08:35:47 SkyScan query 08:35:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:35:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:47 Parameters OK 08:35:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:47 Set A/D data flow result=40 08:35:47 Set A/D channel type result=40 08:35:47 Set A/D encoding result=40 08:35:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:47 Set channel filter=0.000000e+000 result=40 08:35:47 Config A/D Result=40 08:35:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:47 Get A/D filter: -9.255963e+061 result=40 08:35:47 Get A/D value=-858993460 result=40 08:35:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:47 Parameters OK 08:35:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:47 Set A/D data flow result=40 08:35:47 Set A/D channel type result=40 08:35:47 Set A/D encoding result=40 08:35:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:47 Set channel filter=0.000000e+000 result=40 08:35:47 Config A/D Result=40 08:35:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:47 Get A/D filter: -9.255963e+061 result=40 08:35:47 Get A/D value=-858993460 result=40 08:35:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:47 Aux= 08:35:47 Message to Camera, serial 110819 queued [UTC 2018-12-13 08:35:52] 08:36:24 Received message from Master: op=PointingHead serial=110832 08:36:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:36:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:36:25 Point started: ret=0 08:36:25 point_skyscan result=0 08:36:25 Check angles 08:36:25 SkyScan query 08:36:26 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.385<-16559 Statuses=0009 0009 08:36:26 Msec=0 True Az=64.215 Ze=-68.385 Az status=0009 Ze status=0009 08:36:26 Check angles 08:36:26 SkyScan query 08:36:27 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.385<-17959 Statuses=0009 0009 08:36:27 Msec=750 True Az=81.6 Ze=-89.385 Az status=0009 Ze status=0009 08:36:27 Check angles 08:36:27 SkyScan query 08:36:27 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.775<-19385 Statuses=0009 0009 08:36:27 Msec=1500 True Az=99.435 Ze=-110.775 Az status=0009 Ze status=0009 08:36:28 Check angles 08:36:28 SkyScan query 08:36:28 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.685<-20779 Statuses=0009 0009 08:36:28 Msec=2250 True Az=116.925 Ze=-131.685 Az status=0009 Ze status=0009 08:36:28 Check angles 08:36:28 SkyScan query 08:36:29 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 08:36:29 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 08:36:29 Check angles 08:36:29 SkyScan query 08:36:30 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:36:30 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:36:30 Message to Master queued w/err=0: serial=110832 error=0 08:36:35 Received message from Master: op=Filter serial=110833 08:36:35 Color wheel filter change from 0 to 0 08:36:35 FLIGetFilterPos err=0 currentPosition=0 08:36:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:35 Filter is already there-color wheel unchanged 08:36:35 Received message from Master: op=Shutter serial=110834 08:36:35 Shutter LASER close 08:36:35 Received message from Camera: op=State serial=110836 08:36:35 GetSingleValue result=40 Value=cccccccc 08:36:35 SkyScan query 08:36:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:36:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:35 Parameters OK 08:36:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:35 Set A/D data flow result=40 08:36:35 Set A/D channel type result=40 08:36:35 Set A/D encoding result=40 08:36:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:35 Set channel filter=0.000000e+000 result=40 08:36:35 Config A/D Result=40 08:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:35 Get A/D filter: -9.255963e+061 result=40 08:36:35 Get A/D value=-858993460 result=40 08:36:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:35 Parameters OK 08:36:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:35 Set A/D data flow result=40 08:36:35 Set A/D channel type result=40 08:36:35 Set A/D encoding result=40 08:36:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:35 Set channel filter=0.000000e+000 result=40 08:36:35 Config A/D Result=40 08:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:35 Get A/D filter: -9.255963e+061 result=40 08:36:35 Get A/D value=-858993460 result=40 08:36:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:35 Aux= 08:36:35 Message to Camera, serial 110836 queued 08:37:12 Received message from Master: op=PointingHead serial=110849 08:37:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:37:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:37:13 Point started: ret=0 08:37:13 point_skyscan result=0 08:37:13 Check angles 08:37:13 SkyScan query 08:37:14 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 08:37:14 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 08:37:14 Check angles 08:37:14 SkyScan query 08:37:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:37:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:37:15 Message to Master queued w/err=0: serial=110849 error=0 08:37:20 Received message from Master: op=Filter serial=110850 08:37:20 Color wheel filter change from 0 to 0 08:37:20 FLIGetFilterPos err=0 currentPosition=0 08:37:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:20 Filter is already there-color wheel unchanged 08:37:20 Received message from Master: op=Shutter serial=110851 08:37:20 Shutter LASER open 08:37:20 Received message from Camera: op=State serial=110853 08:37:20 GetSingleValue result=40 Value=cccccccc 08:37:20 SkyScan query 08:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:37:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:21 Parameters OK 08:37:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:21 Set A/D data flow result=40 08:37:21 Set A/D channel type result=40 08:37:21 Set A/D encoding result=40 08:37:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:21 Set channel filter=0.000000e+000 result=40 08:37:21 Config A/D Result=40 08:37:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:21 Get A/D filter: -9.255963e+061 result=40 08:37:21 Get A/D value=-858993460 result=40 08:37:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:21 Parameters OK 08:37:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:21 Set A/D data flow result=40 08:37:21 Set A/D channel type result=40 08:37:21 Set A/D encoding result=40 08:37:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:21 Set channel filter=0.000000e+000 result=40 08:37:21 Config A/D Result=40 08:37:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:21 Get A/D filter: -9.255963e+061 result=40 08:37:21 Get A/D value=-858993460 result=40 08:37:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:21 Aux= 08:37:21 Message to Camera, serial 110853 queued 08:37:29 Received message from Master: op=Shutter serial=110863 08:37:29 Shutter LASER close 08:37:30 Received message from Master: op=PointingHead serial=110867 08:37:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:37:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:37:30 Point started: ret=0 08:37:30 point_skyscan result=0 08:37:31 Check angles 08:37:31 SkyScan query 08:37:31 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.935<-21529 Statuses=0009 0009 08:37:31 Msec=0 True Az=136.215 Ze=-142.935 Az status=0009 Ze status=0009 08:37:32 Check angles 08:37:32 SkyScan query 08:37:32 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.965<-20131 Statuses=0009 0009 08:37:32 Msec=750 True Az=153.69 Ze=-121.965 Az status=0009 Ze status=0009 08:37:32 Check angles 08:37:32 SkyScan query 08:37:33 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.53<-18702 Statuses=0009 0009 08:37:33 Msec=1500 True Az=171.57 Ze=-100.53 Az status=0009 Ze status=0009 08:37:33 Check angles 08:37:33 SkyScan query 08:37:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.635<-17309 Statuses=0008 0009 08:37:34 Msec=2250 True Az=176.01 Ze=-79.635 Az status=0008 Ze status=0009 08:37:34 Check angles 08:37:34 SkyScan query 08:37:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 08:37:34 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 08:37:35 Check angles 08:37:35 SkyScan query 08:37:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:37:35 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:37:35 Message to Master queued w/err=0: serial=110867 error=0 08:37:40 Received message from Master: op=Filter serial=110868 08:37:40 Color wheel filter change from 0 to 0 08:37:40 FLIGetFilterPos err=0 currentPosition=0 08:37:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:40 Filter is already there-color wheel unchanged 08:37:40 Received message from Master: op=Shutter serial=110869 08:37:40 Shutter LASER close 08:37:41 Received message from Camera: op=State serial=110871 08:37:41 GetSingleValue result=40 Value=cccccccc 08:37:41 SkyScan query 08:37:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:37:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:41 Parameters OK 08:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:41 Set A/D data flow result=40 08:37:41 Set A/D channel type result=40 08:37:41 Set A/D encoding result=40 08:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:41 Set channel filter=0.000000e+000 result=40 08:37:41 Config A/D Result=40 08:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:41 Get A/D filter: -9.255963e+061 result=40 08:37:41 Get A/D value=-858993460 result=40 08:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:41 Parameters OK 08:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:41 Set A/D data flow result=40 08:37:41 Set A/D channel type result=40 08:37:41 Set A/D encoding result=40 08:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:41 Set channel filter=0.000000e+000 result=40 08:37:41 Config A/D Result=40 08:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:41 Get A/D filter: -9.255963e+061 result=40 08:37:41 Get A/D value=-858993460 result=40 08:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:41 Aux= 08:37:41 Message to Camera, serial 110871 queued 08:38:18 Received message from Master: op=PointingHead serial=110884 08:38:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:38:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:38:18 Point started: ret=0 08:38:18 point_skyscan result=0 08:38:19 Check angles 08:38:19 SkyScan query 08:38:20 SkyScan query done: ret=0 az=152.835<-10189 ze=-21.675<-13445 Statuses=0009 0009 08:38:20 Msec=0 True Az=152.835 Ze=-21.675 Az status=0009 Ze status=0009 08:38:20 Check angles 08:38:20 SkyScan query 08:38:20 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.63<-12042 Statuses=0009 0009 08:38:20 Msec=750 True Az=135.3 Ze=-0.63 Az status=0009 Ze status=0009 08:38:21 Check angles 08:38:21 SkyScan query 08:38:21 SkyScan query done: ret=0 az=117.48<-7832 ze=20.685<-10621 Statuses=0009 0009 08:38:21 Msec=1500 True Az=117.48 Ze=20.685 Az status=0009 Ze status=0009 08:38:21 Check angles 08:38:21 SkyScan query 08:38:22 SkyScan query done: ret=0 az=100.095<-6673 ze=41.67<-9222 Statuses=0009 0009 08:38:22 Msec=2250 True Az=100.095 Ze=41.67 Az status=0009 Ze status=0009 08:38:22 Check angles 08:38:22 SkyScan query 08:38:23 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:38:23 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:38:23 Check angles 08:38:23 SkyScan query 08:38:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:38:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:38:23 Message to Master queued w/err=0: serial=110884 error=0 08:38:28 Received message from Master: op=Filter serial=110885 08:38:28 Color wheel filter change from 0 to 0 08:38:28 FLIGetFilterPos err=0 currentPosition=0 08:38:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:28 Filter is already there-color wheel unchanged 08:38:29 Received message from Master: op=Shutter serial=110886 08:38:29 Shutter LASER close 08:38:29 Received message from Camera: op=State serial=110888 08:38:29 GetSingleValue result=40 Value=cccccccc 08:38:29 SkyScan query 08:38:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:38:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:29 Parameters OK 08:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:29 Set A/D data flow result=40 08:38:29 Set A/D channel type result=40 08:38:29 Set A/D encoding result=40 08:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:29 Set channel filter=0.000000e+000 result=40 08:38:29 Config A/D Result=40 08:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:29 Get A/D filter: -9.255963e+061 result=40 08:38:29 Get A/D value=-858993460 result=40 08:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:29 Parameters OK 08:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:29 Set A/D data flow result=40 08:38:29 Set A/D channel type result=40 08:38:29 Set A/D encoding result=40 08:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:29 Set channel filter=0.000000e+000 result=40 08:38:29 Config A/D Result=40 08:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:29 Get A/D filter: -9.255963e+061 result=40 08:38:29 Get A/D value=-858993460 result=40 08:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:29 Aux= 08:38:29 Message to Camera, serial 110888 queued 08:39:06 Received message from Master: op=PointingHead serial=110901 08:39:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:39:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:39:06 Point started: ret=0 08:39:06 point_skyscan result=0 08:39:07 Check angles 08:39:07 SkyScan query 08:39:08 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 08:39:08 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 08:39:08 Check angles 08:39:08 SkyScan query 08:39:08 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 08:39:08 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 08:39:09 Check angles 08:39:09 SkyScan query 08:39:09 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 08:39:09 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 08:39:09 Check angles 08:39:09 SkyScan query 08:39:10 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 08:39:10 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 08:39:10 Check angles 08:39:10 SkyScan query 08:39:11 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:39:11 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:39:11 Check angles 08:39:11 SkyScan query 08:39:11 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:39:11 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:39:11 Message to Master queued w/err=0: serial=110901 error=0 08:39:16 Received message from Master: op=Filter serial=110902 08:39:16 Color wheel filter change from 0 to 0 08:39:16 FLIGetFilterPos err=0 currentPosition=0 08:39:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:16 Filter is already there-color wheel unchanged 08:39:17 Received message from Master: op=Shutter serial=110903 08:39:17 Shutter LASER close 08:39:17 Received message from Camera: op=State serial=110905 08:39:17 GetSingleValue result=40 Value=cccccccc 08:39:17 SkyScan query 08:39:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:39:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:17 Parameters OK 08:39:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:17 Set A/D data flow result=40 08:39:17 Set A/D channel type result=40 08:39:17 Set A/D encoding result=40 08:39:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:17 Set channel filter=0.000000e+000 result=40 08:39:17 Config A/D Result=40 08:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:17 Get A/D filter: -9.255963e+061 result=40 08:39:17 Get A/D value=-858993460 result=40 08:39:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:17 Parameters OK 08:39:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:17 Set A/D data flow result=40 08:39:17 Set A/D channel type result=40 08:39:17 Set A/D encoding result=40 08:39:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:17 Set channel filter=0.000000e+000 result=40 08:39:17 Config A/D Result=40 08:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:17 Get A/D filter: -9.255963e+061 result=40 08:39:17 Get A/D value=-858993460 result=40 08:39:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:17 Aux= 08:39:17 Message to Camera, serial 110905 queued 08:39:54 Received message from Master: op=PointingHead serial=110918 08:39:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:39:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:39:54 Point started: ret=0 08:39:54 point_skyscan result=0 08:39:55 Check angles 08:39:55 SkyScan query 08:39:56 SkyScan query done: ret=0 az=152.64<-10176 ze=8.22<-11452 Statuses=0009 0009 08:39:56 Msec=0 True Az=152.64 Ze=8.22 Az status=0009 Ze status=0009 08:39:56 Check angles 08:39:56 SkyScan query 08:39:57 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.705<-12847 Statuses=0009 0009 08:39:57 Msec=750 True Az=135.15 Ze=-12.705 Az status=0009 Ze status=0009 08:39:57 Check angles 08:39:57 SkyScan query 08:39:57 SkyScan query done: ret=0 az=117.33<-7822 ze=-34.08<-14272 Statuses=0009 0009 08:39:57 Msec=1500 True Az=117.33 Ze=-34.08 Az status=0009 Ze status=0009 08:39:57 Check angles 08:39:57 SkyScan query 08:39:58 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.57<-15438 Statuses=0009 0009 08:39:58 Msec=2250 True Az=99.915 Ze=-51.57 Az status=0009 Ze status=0009 08:39:58 Check angles 08:39:58 SkyScan query 08:39:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 08:39:59 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 08:39:59 Check angles 08:39:59 SkyScan query 08:40:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:40:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:40:00 Message to Master queued w/err=0: serial=110918 error=0 08:40:05 Received message from Master: op=Filter serial=110919 08:40:05 Color wheel filter change from 0 to 0 08:40:05 FLIGetFilterPos err=0 currentPosition=0 08:40:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:05 Filter is already there-color wheel unchanged 08:40:05 Received message from Master: op=Shutter serial=110920 08:40:05 Shutter LASER close 08:40:05 Received message from Camera: op=State serial=110922 08:40:05 GetSingleValue result=40 Value=cccccccc 08:40:05 SkyScan query 08:40:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:40:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:05 Parameters OK 08:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:05 Set A/D data flow result=40 08:40:05 Set A/D channel type result=40 08:40:05 Set A/D encoding result=40 08:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:05 Set channel filter=0.000000e+000 result=40 08:40:05 Config A/D Result=40 08:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:05 Get A/D filter: -9.255963e+061 result=40 08:40:05 Get A/D value=-858993460 result=40 08:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:05 Parameters OK 08:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:05 Set A/D data flow result=40 08:40:05 Set A/D channel type result=40 08:40:05 Set A/D encoding result=40 08:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:05 Set channel filter=0.000000e+000 result=40 08:40:05 Config A/D Result=40 08:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:05 Get A/D filter: -9.255963e+061 result=40 08:40:05 Get A/D value=-858993460 result=40 08:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:05 Aux= 08:40:05 Message to Camera, serial 110922 queued 08:40:42 Received message from Master: op=PointingHead serial=110935 08:40:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:40:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:40:43 Point started: ret=0 08:40:43 point_skyscan result=0 08:40:43 Check angles 08:40:43 SkyScan query 08:40:44 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.78<-17452 Statuses=0009 0009 08:40:44 Msec=0 True Az=109.365 Ze=-81.78 Az status=0009 Ze status=0009 08:40:44 Check angles 08:40:44 SkyScan query 08:40:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 08:40:45 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 08:40:45 Check angles 08:40:45 SkyScan query 08:40:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 08:40:45 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 08:40:46 Check angles 08:40:46 SkyScan query 08:40:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 08:40:46 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 08:40:46 Check angles 08:40:46 SkyScan query 08:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.585<-23039 Statuses=0008 0009 08:40:47 Msec=3000 True Az=112.995 Ze=-165.585 Az status=0008 Ze status=0009 08:40:47 Check angles 08:40:47 SkyScan query 08:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:40:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:40:48 Message to Master queued w/err=0: serial=110935 error=0 08:40:53 Received message from Master: op=Filter serial=110936 08:40:53 Color wheel filter change from 0 to 0 08:40:53 FLIGetFilterPos err=0 currentPosition=0 08:40:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:53 Filter is already there-color wheel unchanged 08:40:53 Received message from Master: op=Shutter serial=110937 08:40:53 Shutter LASER open 08:40:53 Received message from Camera: op=State serial=110939 08:40:53 GetSingleValue result=40 Value=cccccccc 08:40:53 SkyScan query 08:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:40:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:54 Parameters OK 08:40:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:54 Set A/D data flow result=40 08:40:54 Set A/D channel type result=40 08:40:54 Set A/D encoding result=40 08:40:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:54 Set channel filter=0.000000e+000 result=40 08:40:54 Config A/D Result=40 08:40:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:54 Get A/D filter: -9.255963e+061 result=40 08:40:54 Get A/D value=-858993460 result=40 08:40:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:54 Parameters OK 08:40:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:54 Set A/D data flow result=40 08:40:54 Set A/D channel type result=40 08:40:54 Set A/D encoding result=40 08:40:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:54 Set channel filter=0.000000e+000 result=40 08:40:54 Config A/D Result=40 08:40:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:54 Get A/D filter: -9.255963e+061 result=40 08:40:54 Get A/D value=-858993460 result=40 08:40:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:54 Aux= 08:40:54 Message to Camera, serial 110939 queued 08:41:02 Received message from Master: op=Shutter serial=110949 08:41:02 Shutter LASER close 08:41:02 Received message from Master: op=PointingHead serial=110953 08:41:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:41:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:41:03 Point started: ret=0 08:41:03 point_skyscan result=0 08:41:04 Check angles 08:41:04 SkyScan query 08:41:04 SkyScan query done: ret=0 az=90.105<-6007 ze=157.425<-1505 Statuses=0009 0009 08:41:04 Msec=0 True Az=90.105 Ze=157.425 Az status=0009 Ze status=0009 08:41:04 Check angles 08:41:04 SkyScan query 08:41:05 SkyScan query done: ret=0 az=72.66<-4844 ze=136.425<-2905 Statuses=0009 0009 08:41:05 Msec=750 True Az=72.66 Ze=136.425 Az status=0009 Ze status=0009 08:41:05 Check angles 08:41:05 SkyScan query 08:41:06 SkyScan query done: ret=0 az=55.155<-3677 ze=115.515<-4299 Statuses=0009 0009 08:41:06 Msec=1500 True Az=55.155 Ze=115.515 Az status=0009 Ze status=0009 08:41:06 Check angles 08:41:06 SkyScan query 08:41:06 SkyScan query done: ret=0 az=40.875<-2725 ze=94.485<-5701 Statuses=0009 0009 08:41:06 Msec=2250 True Az=40.875 Ze=94.485 Az status=0009 Ze status=0009 08:41:07 Check angles 08:41:07 SkyScan query 08:41:07 SkyScan query done: ret=0 az=40.995<-2733 ze=73.62<-7092 Statuses=0008 0009 08:41:07 Msec=3000 True Az=40.995 Ze=73.62 Az status=0008 Ze status=0009 08:41:07 Check angles 08:41:07 SkyScan query 08:41:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.965<-8469 Statuses=0008 0009 08:41:08 Msec=3750 True Az=40.995 Ze=52.965 Az status=0008 Ze status=0009 08:41:08 Check angles 08:41:08 SkyScan query 08:41:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:41:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:41:09 Message to Master queued w/err=0: serial=110953 error=0 08:41:14 Received message from Master: op=Filter serial=110954 08:41:14 Color wheel filter change from 0 to 0 08:41:14 FLIGetFilterPos err=0 currentPosition=0 08:41:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:14 Filter is already there-color wheel unchanged 08:41:14 Received message from Master: op=Shutter serial=110955 08:41:14 Shutter LASER close 08:41:14 Received message from Camera: op=State serial=110957 08:41:14 GetSingleValue result=40 Value=cccccccc 08:41:14 SkyScan query 08:41:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:41:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:15 Parameters OK 08:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:15 Set A/D data flow result=40 08:41:15 Set A/D channel type result=40 08:41:15 Set A/D encoding result=40 08:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:15 Set channel filter=0.000000e+000 result=40 08:41:15 Config A/D Result=40 08:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:15 Get A/D filter: -9.255963e+061 result=40 08:41:15 Get A/D value=-858993460 result=40 08:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:15 Parameters OK 08:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:15 Set A/D data flow result=40 08:41:15 Set A/D channel type result=40 08:41:15 Set A/D encoding result=40 08:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:15 Set channel filter=0.000000e+000 result=40 08:41:15 Config A/D Result=40 08:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:15 Get A/D filter: -9.255963e+061 result=40 08:41:15 Get A/D value=-858993460 result=40 08:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:15 Aux= 08:41:15 Message to Camera, serial 110957 queued 08:41:51 Received message from Master: op=PointingHead serial=110970 08:41:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:41:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:41:52 Point started: ret=0 08:41:52 point_skyscan result=0 08:41:52 Check angles 08:41:52 SkyScan query 08:41:53 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 08:41:53 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 08:41:53 Check angles 08:41:53 SkyScan query 08:41:54 SkyScan query done: ret=0 az=81.825<-5455 ze=66.495<-7567 Statuses=0009 0008 08:41:54 Msec=750 True Az=81.825 Ze=66.495 Az status=0009 Ze status=0008 08:41:54 Check angles 08:41:54 SkyScan query 08:41:55 SkyScan query done: ret=0 az=99.87<-6658 ze=66.495<-7567 Statuses=0009 0008 08:41:55 Msec=1500 True Az=99.87 Ze=66.495 Az status=0009 Ze status=0008 08:41:55 Check angles 08:41:55 SkyScan query 08:41:55 SkyScan query done: ret=0 az=117.3<-7820 ze=66.495<-7567 Statuses=0009 0008 08:41:55 Msec=2250 True Az=117.3 Ze=66.495 Az status=0009 Ze status=0008 08:41:55 Check angles 08:41:55 SkyScan query 08:41:56 SkyScan query done: ret=0 az=134.76<-8984 ze=66.495<-7567 Statuses=0009 0008 08:41:56 Msec=3000 True Az=134.76 Ze=66.495 Az status=0009 Ze status=0008 08:41:56 Check angles 08:41:56 SkyScan query 08:41:57 SkyScan query done: ret=0 az=152.19<-10146 ze=66.495<-7567 Statuses=0009 0008 08:41:57 Msec=3750 True Az=152.19 Ze=66.495 Az status=0009 Ze status=0008 08:41:57 Check angles 08:41:57 SkyScan query 08:41:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:41:58 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:41:58 Message to Master queued w/err=0: serial=110970 error=0 08:42:03 Received message from Master: op=Filter serial=110971 08:42:03 Color wheel filter change from 0 to 0 08:42:03 FLIGetFilterPos err=0 currentPosition=0 08:42:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:03 Filter is already there-color wheel unchanged 08:42:03 Received message from Master: op=Shutter serial=110972 08:42:03 Shutter LASER close 08:42:03 Received message from Camera: op=State serial=110974 08:42:03 GetSingleValue result=40 Value=cccccccc 08:42:03 SkyScan query 08:42:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:42:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:03 Parameters OK 08:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:03 Set A/D data flow result=40 08:42:03 Set A/D channel type result=40 08:42:03 Set A/D encoding result=40 08:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:03 Set channel filter=0.000000e+000 result=40 08:42:03 Config A/D Result=40 08:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:03 Get A/D filter: -9.255963e+061 result=40 08:42:03 Get A/D value=-858993460 result=40 08:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:03 Parameters OK 08:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:03 Set A/D data flow result=40 08:42:03 Set A/D channel type result=40 08:42:03 Set A/D encoding result=40 08:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:03 Set channel filter=0.000000e+000 result=40 08:42:03 Config A/D Result=40 08:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:03 Get A/D filter: -9.255963e+061 result=40 08:42:03 Get A/D value=-858993460 result=40 08:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:03 Aux= 08:42:03 Message to Camera, serial 110974 queued 08:42:39 Received message from Master: op=PointingHead serial=110986 08:42:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:42:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:42:40 Point started: ret=0 08:42:40 point_skyscan result=0 08:42:40 Check angles 08:42:40 SkyScan query 08:42:41 SkyScan query done: ret=0 az=134.85<-8990 ze=36.66<-9556 Statuses=0009 0009 08:42:41 Msec=0 True Az=134.85 Ze=36.66 Az status=0009 Ze status=0009 08:42:41 Check angles 08:42:41 SkyScan query 08:42:42 SkyScan query done: ret=0 az=117.495<-7833 ze=15.735<-10951 Statuses=0009 0009 08:42:42 Msec=750 True Az=117.495 Ze=15.735 Az status=0009 Ze status=0009 08:42:42 Check angles 08:42:42 SkyScan query 08:42:43 SkyScan query done: ret=0 az=99.72<-6648 ze=-5.655<-12377 Statuses=0009 0009 08:42:43 Msec=1500 True Az=99.72 Ze=-5.655 Az status=0009 Ze status=0009 08:42:43 Check angles 08:42:43 SkyScan query 08:42:43 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.595<-13773 Statuses=0009 0009 08:42:43 Msec=2250 True Az=82.215 Ze=-26.595 Az status=0009 Ze status=0009 08:42:43 Check angles 08:42:43 SkyScan query 08:42:44 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.565<-14571 Statuses=0009 0008 08:42:44 Msec=3000 True Az=64.68 Ze=-38.565 Az status=0009 Ze status=0008 08:42:44 Check angles 08:42:44 SkyScan query 08:42:45 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.535<-14569 Statuses=0009 0008 08:42:45 Msec=3750 True Az=47.265 Ze=-38.535 Az status=0009 Ze status=0008 08:42:45 Check angles 08:42:45 SkyScan query 08:42:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:42:46 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:42:46 Message to Master queued w/err=0: serial=110986 error=0 08:42:51 Received message from Master: op=Filter serial=110987 08:42:51 Color wheel filter change from 0 to 0 08:42:51 FLIGetFilterPos err=0 currentPosition=0 08:42:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:51 Filter is already there-color wheel unchanged 08:42:51 Received message from Master: op=Shutter serial=110988 08:42:51 Shutter LASER close 08:42:51 Received message from Camera: op=State serial=110990 08:42:51 GetSingleValue result=40 Value=cccccccc 08:42:51 SkyScan query 08:42:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:42:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:51 Parameters OK 08:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:51 Set A/D data flow result=40 08:42:51 Set A/D channel type result=40 08:42:51 Set A/D encoding result=40 08:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:51 Set channel filter=0.000000e+000 result=40 08:42:51 Config A/D Result=40 08:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:51 Get A/D filter: -9.255963e+061 result=40 08:42:51 Get A/D value=-858993460 result=40 08:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:51 Parameters OK 08:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:51 Set A/D data flow result=40 08:42:51 Set A/D channel type result=40 08:42:51 Set A/D encoding result=40 08:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:51 Set channel filter=0.000000e+000 result=40 08:42:51 Config A/D Result=40 08:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:51 Get A/D filter: -9.255963e+061 result=40 08:42:51 Get A/D value=-858993460 result=40 08:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:51 Aux= 08:42:51 Message to Camera, serial 110990 queued 08:43:28 Received message from Master: op=PointingHead serial=111003 08:43:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:43:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:43:28 Point started: ret=0 08:43:28 point_skyscan result=0 08:43:29 Check angles 08:43:29 SkyScan query 08:43:30 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.28<-16552 Statuses=0009 0009 08:43:30 Msec=0 True Az=63.945 Ze=-68.28 Az status=0009 Ze status=0009 08:43:30 Check angles 08:43:30 SkyScan query 08:43:31 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.745<-17983 Statuses=0009 0009 08:43:31 Msec=750 True Az=81.78 Ze=-89.745 Az status=0009 Ze status=0009 08:43:31 Check angles 08:43:31 SkyScan query 08:43:31 SkyScan query done: ret=0 az=99.69<-6646 ze=-111.12<-19408 Statuses=0009 0009 08:43:31 Msec=1500 True Az=99.69 Ze=-111.12 Az status=0009 Ze status=0009 08:43:32 Check angles 08:43:32 SkyScan query 08:43:32 SkyScan query done: ret=0 az=117.165<-7811 ze=-132.015<-20801 Statuses=0009 0009 08:43:32 Msec=2250 True Az=117.165 Ze=-132.015 Az status=0009 Ze status=0009 08:43:32 Check angles 08:43:32 SkyScan query 08:43:33 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.525<-21435 Statuses=0009 0008 08:43:33 Msec=3000 True Az=131.13 Ze=-141.525 Az status=0009 Ze status=0008 08:43:33 Check angles 08:43:33 SkyScan query 08:43:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:43:34 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:43:34 Message to Master queued w/err=0: serial=111003 error=0 08:43:39 Received message from Master: op=Filter serial=111004 08:43:39 Color wheel filter change from 0 to 0 08:43:39 FLIGetFilterPos err=0 currentPosition=0 08:43:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:39 Filter is already there-color wheel unchanged 08:43:39 Received message from Master: op=Shutter serial=111005 08:43:39 Shutter LASER close 08:43:39 Received message from Camera: op=State serial=111007 08:43:39 GetSingleValue result=40 Value=cccccccc 08:43:39 SkyScan query 08:43:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:43:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:39 Parameters OK 08:43:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:39 Set A/D data flow result=40 08:43:39 Set A/D channel type result=40 08:43:39 Set A/D encoding result=40 08:43:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:39 Set channel filter=0.000000e+000 result=40 08:43:39 Config A/D Result=40 08:43:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:39 Get A/D filter: -9.255963e+061 result=40 08:43:39 Get A/D value=-858993460 result=40 08:43:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:39 Parameters OK 08:43:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:39 Set A/D data flow result=40 08:43:39 Set A/D channel type result=40 08:43:39 Set A/D encoding result=40 08:43:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:39 Set channel filter=0.000000e+000 result=40 08:43:39 Config A/D Result=40 08:43:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:39 Get A/D filter: -9.255963e+061 result=40 08:43:39 Get A/D value=-858993460 result=40 08:43:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:39 Aux= 08:43:39 Message to Camera, serial 111007 queued 08:44:16 Received message from Master: op=PointingHead serial=111020 08:44:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:44:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:44:17 Point started: ret=0 08:44:17 point_skyscan result=0 08:44:17 Check angles 08:44:17 SkyScan query 08:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0009 0009 08:44:18 Msec=0 True Az=112.995 Ze=-171.48 Az status=0009 Ze status=0009 08:44:18 Check angles 08:44:18 SkyScan query 08:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:44:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:44:19 Message to Master queued w/err=0: serial=111020 error=0 08:44:24 Received message from Master: op=Filter serial=111021 08:44:24 Color wheel filter change from 0 to 0 08:44:24 FLIGetFilterPos err=0 currentPosition=0 08:44:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:24 Filter is already there-color wheel unchanged 08:44:24 Received message from Master: op=Shutter serial=111022 08:44:24 Shutter LASER open 08:44:24 Received message from Camera: op=State serial=111024 08:44:24 GetSingleValue result=40 Value=cccccccc 08:44:24 SkyScan query 08:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:44:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:25 Parameters OK 08:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:25 Set A/D data flow result=40 08:44:25 Set A/D channel type result=40 08:44:25 Set A/D encoding result=40 08:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:25 Set channel filter=0.000000e+000 result=40 08:44:25 Config A/D Result=40 08:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:25 Get A/D filter: -9.255963e+061 result=40 08:44:25 Get A/D value=-858993460 result=40 08:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:25 Parameters OK 08:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:25 Set A/D data flow result=40 08:44:25 Set A/D channel type result=40 08:44:25 Set A/D encoding result=40 08:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:25 Set channel filter=0.000000e+000 result=40 08:44:25 Config A/D Result=40 08:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:25 Get A/D filter: -9.255963e+061 result=40 08:44:25 Get A/D value=-858993460 result=40 08:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:25 Aux= 08:44:25 Message to Camera, serial 111024 queued 08:44:33 Received message from Master: op=Shutter serial=111034 08:44:33 Shutter LASER close 08:44:34 Received message from Master: op=PointingHead serial=111038 08:44:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:44:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:44:34 Point started: ret=0 08:44:34 point_skyscan result=0 08:44:35 Check angles 08:44:35 SkyScan query 08:44:35 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.475<-21565 Statuses=0009 0009 08:44:35 Msec=0 True Az=135.765 Ze=-143.475 Az status=0009 Ze status=0009 08:44:35 Check angles 08:44:35 SkyScan query 08:44:36 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.04<-20136 Statuses=0009 0009 08:44:36 Msec=750 True Az=153.63 Ze=-122.04 Az status=0009 Ze status=0009 08:44:36 Check angles 08:44:36 SkyScan query 08:44:37 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.13<-18742 Statuses=0009 0009 08:44:37 Msec=1500 True Az=171.21 Ze=-101.13 Az status=0009 Ze status=0009 08:44:37 Check angles 08:44:37 SkyScan query 08:44:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 08:44:38 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 08:44:38 Check angles 08:44:38 SkyScan query 08:44:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.205<-15947 Statuses=0008 0009 08:44:38 Msec=3000 True Az=176.01 Ze=-59.205 Az status=0008 Ze status=0009 08:44:38 Check angles 08:44:38 SkyScan query 08:44:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:44:39 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:44:39 Message to Master queued w/err=0: serial=111038 error=0 08:44:44 Received message from Master: op=Filter serial=111039 08:44:44 Color wheel filter change from 0 to 0 08:44:44 FLIGetFilterPos err=0 currentPosition=0 08:44:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:44 Filter is already there-color wheel unchanged 08:44:44 Received message from Master: op=Shutter serial=111040 08:44:44 Shutter LASER close 08:44:44 Received message from Camera: op=State serial=111042 08:44:44 GetSingleValue result=40 Value=cccccccc 08:44:44 SkyScan query 08:44:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:44:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:45 Parameters OK 08:44:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:45 Set A/D data flow result=40 08:44:45 Set A/D channel type result=40 08:44:45 Set A/D encoding result=40 08:44:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:45 Set channel filter=0.000000e+000 result=40 08:44:45 Config A/D Result=40 08:44:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:45 Get A/D filter: -9.255963e+061 result=40 08:44:45 Get A/D value=-858993460 result=40 08:44:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:45 Parameters OK 08:44:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:45 Set A/D data flow result=40 08:44:45 Set A/D channel type result=40 08:44:45 Set A/D encoding result=40 08:44:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:45 Set channel filter=0.000000e+000 result=40 08:44:45 Config A/D Result=40 08:44:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:45 Get A/D filter: -9.255963e+061 result=40 08:44:45 Get A/D value=-858993460 result=40 08:44:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:45 Aux= 08:44:45 Message to Camera, serial 111042 queued 08:45:22 Received message from Master: op=PointingHead serial=111055 08:45:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:45:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:45:22 Point started: ret=0 08:45:22 point_skyscan result=0 08:45:23 Check angles 08:45:23 SkyScan query 08:45:23 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.05<-13470 Statuses=0009 0009 08:45:23 Msec=0 True Az=153.21 Ze=-22.05 Az status=0009 Ze status=0009 08:45:24 Check angles 08:45:24 SkyScan query 08:45:24 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.065<-12071 Statuses=0009 0009 08:45:24 Msec=750 True Az=135.795 Ze=-1.065 Az status=0009 Ze status=0009 08:45:24 Check angles 08:45:24 SkyScan query 08:45:25 SkyScan query done: ret=0 az=117.78<-7852 ze=20.325<-10645 Statuses=0009 0009 08:45:25 Msec=1500 True Az=117.78 Ze=20.325 Az status=0009 Ze status=0009 08:45:25 Check angles 08:45:25 SkyScan query 08:45:26 SkyScan query done: ret=0 az=100.47<-6698 ze=41.325<-9245 Statuses=0009 0009 08:45:26 Msec=2250 True Az=100.47 Ze=41.325 Az status=0009 Ze status=0009 08:45:26 Check angles 08:45:26 SkyScan query 08:45:27 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 08:45:27 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 08:45:27 Check angles 08:45:27 SkyScan query 08:45:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:45:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:45:27 Message to Master queued w/err=0: serial=111055 error=0 08:45:27 Received message from Master: op=Identify serial=111056 08:45:32 Received message from Master: op=Filter serial=111059 08:45:32 Color wheel filter change from 0 to 0 08:45:32 FLIGetFilterPos err=0 currentPosition=0 08:45:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:32 Filter is already there-color wheel unchanged 08:45:32 Received message from Master: op=Shutter serial=111060 08:45:32 Shutter LASER close 08:45:32 Received message from Camera: op=State serial=111062 08:45:32 GetSingleValue result=40 Value=cccccccc 08:45:32 SkyScan query 08:45:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:45:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:33 Parameters OK 08:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:33 Set A/D data flow result=40 08:45:33 Set A/D channel type result=40 08:45:33 Set A/D encoding result=40 08:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:33 Set channel filter=0.000000e+000 result=40 08:45:33 Config A/D Result=40 08:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:33 Get A/D filter: -9.255963e+061 result=40 08:45:33 Get A/D value=-858993460 result=40 08:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:33 Parameters OK 08:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:33 Set A/D data flow result=40 08:45:33 Set A/D channel type result=40 08:45:33 Set A/D encoding result=40 08:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:33 Set channel filter=0.000000e+000 result=40 08:45:33 Config A/D Result=40 08:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:33 Get A/D filter: -9.255963e+061 result=40 08:45:33 Get A/D value=-858993460 result=40 08:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:33 Aux= 08:45:33 Message to Camera, serial 111062 queued 08:46:10 Received message from Master: op=PointingHead serial=111075 08:46:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:46:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:46:10 Point started: ret=0 08:46:10 point_skyscan result=0 08:46:11 Check angles 08:46:11 SkyScan query 08:46:12 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 08:46:12 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 08:46:12 Check angles 08:46:12 SkyScan query 08:46:12 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 08:46:12 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 08:46:12 Check angles 08:46:12 SkyScan query 08:46:13 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 08:46:13 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 08:46:13 Check angles [UTC 2018-12-13 08:46:13] 08:46:13 SkyScan query 08:46:14 SkyScan query done: ret=0 az=163.065<-10871 ze=38.505<-9433 Statuses=0009 0008 08:46:14 Msec=2250 True Az=163.065 Ze=38.505 Az status=0009 Ze status=0008 08:46:14 Check angles 08:46:14 SkyScan query 08:46:15 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:46:15 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:46:15 Check angles 08:46:15 SkyScan query 08:46:15 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:46:15 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:46:15 Message to Master queued w/err=0: serial=111075 error=0 08:46:20 Received message from Master: op=Filter serial=111076 08:46:20 Color wheel filter change from 0 to 0 08:46:20 FLIGetFilterPos err=0 currentPosition=0 08:46:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:20 Filter is already there-color wheel unchanged 08:46:20 Received message from Master: op=Shutter serial=111077 08:46:20 Shutter LASER close 08:46:21 Received message from Camera: op=State serial=111079 08:46:21 GetSingleValue result=40 Value=cccccccc 08:46:21 SkyScan query 08:46:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:46:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:21 Parameters OK 08:46:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:21 Set A/D data flow result=40 08:46:21 Set A/D channel type result=40 08:46:21 Set A/D encoding result=40 08:46:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:21 Set channel filter=0.000000e+000 result=40 08:46:21 Config A/D Result=40 08:46:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:21 Get A/D filter: -9.255963e+061 result=40 08:46:21 Get A/D value=-858993460 result=40 08:46:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:21 Parameters OK 08:46:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:21 Set A/D data flow result=40 08:46:21 Set A/D channel type result=40 08:46:21 Set A/D encoding result=40 08:46:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:21 Set channel filter=0.000000e+000 result=40 08:46:21 Config A/D Result=40 08:46:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:21 Get A/D filter: -9.255963e+061 result=40 08:46:21 Get A/D value=-858993460 result=40 08:46:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:21 Aux= 08:46:21 Message to Camera, serial 111079 queued 08:46:58 Received message from Master: op=PointingHead serial=111092 08:46:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:46:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:46:58 Point started: ret=0 08:46:58 point_skyscan result=0 08:46:59 Check angles 08:46:59 SkyScan query 08:47:00 SkyScan query done: ret=0 az=152.91<-10194 ze=8.64<-11424 Statuses=0009 0009 08:47:00 Msec=0 True Az=152.91 Ze=8.64 Az status=0009 Ze status=0009 08:47:00 Check angles 08:47:00 SkyScan query 08:47:00 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.33<-12822 Statuses=0009 0009 08:47:00 Msec=750 True Az=135.405 Ze=-12.33 Az status=0009 Ze status=0009 08:47:01 Check angles 08:47:01 SkyScan query 08:47:01 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.705<-14247 Statuses=0009 0009 08:47:01 Msec=1500 True Az=117.555 Ze=-33.705 Az status=0009 Ze status=0009 08:47:01 Check angles 08:47:01 SkyScan query 08:47:02 SkyScan query done: ret=0 az=99.72<-6648 ze=-51.555<-15437 Statuses=0009 0009 08:47:02 Msec=2250 True Az=99.72 Ze=-51.555 Az status=0009 Ze status=0009 08:47:02 Check angles 08:47:02 SkyScan query 08:47:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 08:47:03 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 08:47:03 Check angles 08:47:03 SkyScan query 08:47:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:47:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:47:03 Message to Master queued w/err=0: serial=111092 error=0 08:47:08 Received message from Master: op=Filter serial=111093 08:47:08 Color wheel filter change from 0 to 0 08:47:08 FLIGetFilterPos err=0 currentPosition=0 08:47:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:08 Filter is already there-color wheel unchanged 08:47:09 Received message from Master: op=Shutter serial=111094 08:47:09 Shutter LASER close 08:47:09 Received message from Camera: op=State serial=111096 08:47:09 GetSingleValue result=40 Value=cccccccc 08:47:09 SkyScan query 08:47:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:47:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:09 Parameters OK 08:47:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:09 Set A/D data flow result=40 08:47:09 Set A/D channel type result=40 08:47:09 Set A/D encoding result=40 08:47:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:09 Set channel filter=0.000000e+000 result=40 08:47:09 Config A/D Result=40 08:47:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:09 Get A/D filter: -9.255963e+061 result=40 08:47:09 Get A/D value=-858993460 result=40 08:47:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:09 Parameters OK 08:47:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:09 Set A/D data flow result=40 08:47:09 Set A/D channel type result=40 08:47:09 Set A/D encoding result=40 08:47:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:09 Set channel filter=0.000000e+000 result=40 08:47:09 Config A/D Result=40 08:47:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:09 Get A/D filter: -9.255963e+061 result=40 08:47:09 Get A/D value=-858993460 result=40 08:47:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:09 Aux= 08:47:09 Message to Camera, serial 111096 queued 08:47:46 Received message from Master: op=PointingHead serial=111109 08:47:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:47:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:47:46 Point started: ret=0 08:47:46 point_skyscan result=0 08:47:47 Check angles 08:47:47 SkyScan query 08:47:48 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.15<-17410 Statuses=0009 0009 08:47:48 Msec=0 True Az=108.945 Ze=-81.15 Az status=0009 Ze status=0009 08:47:48 Check angles 08:47:48 SkyScan query 08:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 08:47:49 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 08:47:49 Check angles 08:47:49 SkyScan query 08:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 08:47:49 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 08:47:49 Check angles 08:47:49 SkyScan query 08:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.465<-21631 Statuses=0008 0009 08:47:50 Msec=2250 True Az=112.995 Ze=-144.465 Az status=0008 Ze status=0009 08:47:50 Check angles 08:47:50 SkyScan query 08:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 08:47:51 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 08:47:51 Check angles 08:47:51 SkyScan query 08:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:47:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:47:52 Message to Master queued w/err=0: serial=111109 error=0 08:47:57 Received message from Master: op=Filter serial=111110 08:47:57 Color wheel filter change from 0 to 0 08:47:57 FLIGetFilterPos err=0 currentPosition=0 08:47:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:57 Filter is already there-color wheel unchanged 08:47:57 Received message from Master: op=Shutter serial=111111 08:47:57 Shutter LASER open 08:47:57 Received message from Camera: op=State serial=111113 08:47:57 GetSingleValue result=40 Value=cccccccc 08:47:57 SkyScan query 08:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:47:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:57 Parameters OK 08:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:57 Set A/D data flow result=40 08:47:57 Set A/D channel type result=40 08:47:57 Set A/D encoding result=40 08:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:57 Set channel filter=0.000000e+000 result=40 08:47:57 Config A/D Result=40 08:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:57 Get A/D filter: -9.255963e+061 result=40 08:47:57 Get A/D value=-858993460 result=40 08:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:57 Parameters OK 08:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:57 Set A/D data flow result=40 08:47:57 Set A/D channel type result=40 08:47:57 Set A/D encoding result=40 08:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:57 Set channel filter=0.000000e+000 result=40 08:47:57 Config A/D Result=40 08:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:57 Get A/D filter: -9.255963e+061 result=40 08:47:57 Get A/D value=-858993460 result=40 08:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:57 Aux= 08:47:57 Message to Camera, serial 111113 queued 08:48:06 Received message from Master: op=Shutter serial=111123 08:48:06 Shutter LASER close 08:48:06 Received message from Master: op=PointingHead serial=111127 08:48:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:48:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:48:07 Point started: ret=0 08:48:07 point_skyscan result=0 08:48:07 Check angles 08:48:07 SkyScan query 08:48:08 SkyScan query done: ret=0 az=89.655<-5977 ze=157.02<-1532 Statuses=0009 0009 08:48:08 Msec=0 True Az=89.655 Ze=157.02 Az status=0009 Ze status=0009 08:48:08 Check angles 08:48:08 SkyScan query 08:48:09 SkyScan query done: ret=0 az=72.225<-4815 ze=136.065<-2929 Statuses=0009 0009 08:48:09 Msec=750 True Az=72.225 Ze=136.065 Az status=0009 Ze status=0009 08:48:09 Check angles 08:48:09 SkyScan query 08:48:10 SkyScan query done: ret=0 az=54.6<-3640 ze=114.645<-4357 Statuses=0009 0009 08:48:10 Msec=1500 True Az=54.6 Ze=114.645 Az status=0009 Ze status=0009 08:48:10 Check angles 08:48:10 SkyScan query 08:48:10 SkyScan query done: ret=0 az=40.92<-2728 ze=93.72<-5752 Statuses=0009 0009 08:48:10 Msec=2250 True Az=40.92 Ze=93.72 Az status=0009 Ze status=0009 08:48:10 Check angles 08:48:10 SkyScan query 08:48:11 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 08:48:11 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 08:48:11 Check angles 08:48:11 SkyScan query 08:48:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.2<-8520 Statuses=0008 0009 08:48:12 Msec=3750 True Az=40.995 Ze=52.2 Az status=0008 Ze status=0009 08:48:12 Check angles 08:48:12 SkyScan query 08:48:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:48:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:48:13 Message to Master queued w/err=0: serial=111127 error=0 08:48:18 Received message from Master: op=Filter serial=111128 08:48:18 Color wheel filter change from 0 to 0 08:48:18 FLIGetFilterPos err=0 currentPosition=0 08:48:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:18 Filter is already there-color wheel unchanged 08:48:18 Received message from Master: op=Shutter serial=111129 08:48:18 Shutter LASER close 08:48:18 Received message from Camera: op=State serial=111131 08:48:18 GetSingleValue result=40 Value=cccccccc 08:48:18 SkyScan query 08:48:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:48:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:19 Parameters OK 08:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:19 Set A/D data flow result=40 08:48:19 Set A/D channel type result=40 08:48:19 Set A/D encoding result=40 08:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:19 Set channel filter=0.000000e+000 result=40 08:48:19 Config A/D Result=40 08:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:19 Get A/D filter: -9.255963e+061 result=40 08:48:19 Get A/D value=-858993460 result=40 08:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:19 Parameters OK 08:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:19 Set A/D data flow result=40 08:48:19 Set A/D channel type result=40 08:48:19 Set A/D encoding result=40 08:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:19 Set channel filter=0.000000e+000 result=40 08:48:19 Config A/D Result=40 08:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:19 Get A/D filter: -9.255963e+061 result=40 08:48:19 Get A/D value=-858993460 result=40 08:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:19 Aux= 08:48:19 Message to Camera, serial 111131 queued 08:48:55 Received message from Master: op=PointingHead serial=111144 08:48:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:48:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:48:56 Point started: ret=0 08:48:56 point_skyscan result=0 08:48:56 Check angles 08:48:56 SkyScan query 08:48:57 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 08:48:57 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 08:48:57 Check angles 08:48:57 SkyScan query 08:48:58 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 08:48:58 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 08:48:58 Check angles 08:48:58 SkyScan query 08:48:59 SkyScan query done: ret=0 az=99.615<-6641 ze=66.495<-7567 Statuses=0009 0008 08:48:59 Msec=1500 True Az=99.615 Ze=66.495 Az status=0009 Ze status=0008 08:48:59 Check angles 08:48:59 SkyScan query 08:48:59 SkyScan query done: ret=0 az=117.075<-7805 ze=66.495<-7567 Statuses=0009 0008 08:48:59 Msec=2250 True Az=117.075 Ze=66.495 Az status=0009 Ze status=0008 08:48:59 Check angles 08:48:59 SkyScan query 08:49:00 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 08:49:00 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 08:49:00 Check angles 08:49:00 SkyScan query 08:49:01 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 08:49:01 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 08:49:01 Check angles 08:49:01 SkyScan query 08:49:02 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 08:49:02 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 08:49:02 Message to Master queued w/err=0: serial=111144 error=0 08:49:07 Received message from Master: op=Filter serial=111145 08:49:07 Color wheel filter change from 0 to 0 08:49:07 FLIGetFilterPos err=0 currentPosition=0 08:49:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:07 Filter is already there-color wheel unchanged 08:49:07 Received message from Master: op=Shutter serial=111146 08:49:07 Shutter LASER close 08:49:07 Received message from Camera: op=State serial=111148 08:49:07 GetSingleValue result=40 Value=cccccccc 08:49:07 SkyScan query 08:49:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:49:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:07 Parameters OK 08:49:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:07 Set A/D data flow result=40 08:49:07 Set A/D channel type result=40 08:49:07 Set A/D encoding result=40 08:49:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:07 Set channel filter=0.000000e+000 result=40 08:49:07 Config A/D Result=40 08:49:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:07 Get A/D filter: -9.255963e+061 result=40 08:49:07 Get A/D value=-858993460 result=40 08:49:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:07 Parameters OK 08:49:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:07 Set A/D data flow result=40 08:49:07 Set A/D channel type result=40 08:49:07 Set A/D encoding result=40 08:49:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:07 Set channel filter=0.000000e+000 result=40 08:49:07 Config A/D Result=40 08:49:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:07 Get A/D filter: -9.255963e+061 result=40 08:49:07 Get A/D value=-858993460 result=40 08:49:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:07 Aux= 08:49:07 Message to Camera, serial 111148 queued 08:49:44 Received message from Master: op=PointingHead serial=111161 08:49:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:49:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:49:45 Point started: ret=0 08:49:45 point_skyscan result=0 08:49:45 Check angles 08:49:45 SkyScan query 08:49:46 SkyScan query done: ret=0 az=134.88<-8992 ze=36.66<-9556 Statuses=0009 0009 08:49:46 Msec=0 True Az=134.88 Ze=36.66 Az status=0009 Ze status=0009 08:49:46 Check angles 08:49:46 SkyScan query 08:49:47 SkyScan query done: ret=0 az=117.39<-7826 ze=15.735<-10951 Statuses=0009 0009 08:49:47 Msec=750 True Az=117.39 Ze=15.735 Az status=0009 Ze status=0009 08:49:47 Check angles 08:49:47 SkyScan query 08:49:47 SkyScan query done: ret=0 az=99.99<-6666 ze=-5.265<-12351 Statuses=0009 0009 08:49:47 Msec=1500 True Az=99.99 Ze=-5.265 Az status=0009 Ze status=0009 08:49:48 Check angles 08:49:48 SkyScan query 08:49:48 SkyScan query done: ret=0 az=82.53<-5502 ze=-26.205<-13747 Statuses=0009 0009 08:49:48 Msec=2250 True Az=82.53 Ze=-26.205 Az status=0009 Ze status=0009 08:49:48 Check angles 08:49:48 SkyScan query 08:49:49 SkyScan query done: ret=0 az=65.115<-4341 ze=-38.565<-14571 Statuses=0009 0008 08:49:49 Msec=3000 True Az=65.115 Ze=-38.565 Az status=0009 Ze status=0008 08:49:49 Check angles 08:49:49 SkyScan query 08:49:50 SkyScan query done: ret=0 az=47.67<-3178 ze=-38.535<-14569 Statuses=0009 0008 08:49:50 Msec=3750 True Az=47.67 Ze=-38.535 Az status=0009 Ze status=0008 08:49:50 Check angles 08:49:50 SkyScan query 08:49:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:49:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:49:50 Message to Master queued w/err=0: serial=111161 error=0 08:49:55 Received message from Master: op=Filter serial=111162 08:49:55 Color wheel filter change from 0 to 0 08:49:55 FLIGetFilterPos err=0 currentPosition=0 08:49:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:55 Filter is already there-color wheel unchanged 08:49:56 Received message from Master: op=Shutter serial=111163 08:49:56 Shutter LASER close 08:49:56 Received message from Camera: op=State serial=111165 08:49:56 GetSingleValue result=40 Value=cccccccc 08:49:56 SkyScan query 08:49:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:49:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:56 Parameters OK 08:49:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:56 Set A/D data flow result=40 08:49:56 Set A/D channel type result=40 08:49:56 Set A/D encoding result=40 08:49:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:56 Set channel filter=0.000000e+000 result=40 08:49:56 Config A/D Result=40 08:49:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:56 Get A/D filter: -9.255963e+061 result=40 08:49:56 Get A/D value=-858993460 result=40 08:49:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:56 Parameters OK 08:49:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:56 Set A/D data flow result=40 08:49:56 Set A/D channel type result=40 08:49:56 Set A/D encoding result=40 08:49:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:56 Set channel filter=0.000000e+000 result=40 08:49:56 Config A/D Result=40 08:49:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:56 Get A/D filter: -9.255963e+061 result=40 08:49:56 Get A/D value=-858993460 result=40 08:49:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:56 Aux= 08:49:56 Message to Camera, serial 111165 queued 08:50:33 Received message from Master: op=PointingHead serial=111178 08:50:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:50:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:50:33 Point started: ret=0 08:50:33 point_skyscan result=0 08:50:34 Check angles 08:50:34 SkyScan query 08:50:35 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.055<-16537 Statuses=0009 0009 08:50:35 Msec=0 True Az=64.02 Ze=-68.055 Az status=0009 Ze status=0009 08:50:35 Check angles 08:50:35 SkyScan query 08:50:35 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.055<-17937 Statuses=0009 0009 08:50:35 Msec=750 True Az=81.36 Ze=-89.055 Az status=0009 Ze status=0009 08:50:36 Check angles 08:50:36 SkyScan query 08:50:36 SkyScan query done: ret=0 az=98.865<-6591 ze=-109.995<-19333 Statuses=0009 0009 08:50:36 Msec=1500 True Az=98.865 Ze=-109.995 Az status=0009 Ze status=0009 08:50:36 Check angles 08:50:36 SkyScan query 08:50:37 SkyScan query done: ret=0 az=116.415<-7761 ze=-130.965<-20731 Statuses=0009 0009 08:50:37 Msec=2250 True Az=116.415 Ze=-130.965 Az status=0009 Ze status=0009 08:50:37 Check angles 08:50:37 SkyScan query 08:50:38 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.54<-21436 Statuses=0009 0008 08:50:38 Msec=3000 True Az=131.145 Ze=-141.54 Az status=0009 Ze status=0008 08:50:38 Check angles 08:50:38 SkyScan query 08:50:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:50:38 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:50:38 Message to Master queued w/err=0: serial=111178 error=0 08:50:43 Received message from Master: op=Filter serial=111179 08:50:43 Color wheel filter change from 0 to 0 08:50:43 FLIGetFilterPos err=0 currentPosition=0 08:50:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:43 Filter is already there-color wheel unchanged 08:50:44 Received message from Master: op=Shutter serial=111180 08:50:44 Shutter LASER close 08:50:44 Received message from Camera: op=State serial=111182 08:50:44 GetSingleValue result=40 Value=cccccccc 08:50:44 SkyScan query 08:50:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:50:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:44 Parameters OK 08:50:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:44 Set A/D data flow result=40 08:50:44 Set A/D channel type result=40 08:50:44 Set A/D encoding result=40 08:50:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:44 Set channel filter=0.000000e+000 result=40 08:50:44 Config A/D Result=40 08:50:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:44 Get A/D filter: -9.255963e+061 result=40 08:50:44 Get A/D value=-858993460 result=40 08:50:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:44 Parameters OK 08:50:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:44 Set A/D data flow result=40 08:50:44 Set A/D channel type result=40 08:50:44 Set A/D encoding result=40 08:50:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:44 Set channel filter=0.000000e+000 result=40 08:50:44 Config A/D Result=40 08:50:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:44 Get A/D filter: -9.255963e+061 result=40 08:50:44 Get A/D value=-858993460 result=40 08:50:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:44 Aux= 08:50:44 Message to Camera, serial 111182 queued 08:51:21 Received message from Master: op=PointingHead serial=111195 08:51:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:51:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:51:21 Point started: ret=0 08:51:21 point_skyscan result=0 08:51:22 Check angles 08:51:22 SkyScan query 08:51:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 08:51:23 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 08:51:23 Check angles 08:51:23 SkyScan query 08:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:51:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:51:23 Message to Master queued w/err=0: serial=111195 error=0 08:51:28 Received message from Master: op=Filter serial=111196 08:51:28 Color wheel filter change from 0 to 0 08:51:28 FLIGetFilterPos err=0 currentPosition=0 08:51:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:28 Filter is already there-color wheel unchanged 08:51:29 Received message from Master: op=Shutter serial=111197 08:51:29 Shutter LASER open 08:51:29 Received message from Camera: op=State serial=111199 08:51:29 GetSingleValue result=40 Value=cccccccc 08:51:29 SkyScan query 08:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:51:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:29 Parameters OK 08:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:29 Set A/D data flow result=40 08:51:29 Set A/D channel type result=40 08:51:29 Set A/D encoding result=40 08:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:29 Set channel filter=0.000000e+000 result=40 08:51:29 Config A/D Result=40 08:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:29 Get A/D filter: -9.255963e+061 result=40 08:51:29 Get A/D value=-858993460 result=40 08:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:29 Parameters OK 08:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:29 Set A/D data flow result=40 08:51:29 Set A/D channel type result=40 08:51:29 Set A/D encoding result=40 08:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:29 Set channel filter=0.000000e+000 result=40 08:51:29 Config A/D Result=40 08:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:29 Get A/D filter: -9.255963e+061 result=40 08:51:29 Get A/D value=-858993460 result=40 08:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:29 Aux= 08:51:29 Message to Camera, serial 111199 queued 08:51:38 Received message from Master: op=Shutter serial=111209 08:51:38 Shutter LASER close 08:51:39 Received message from Master: op=PointingHead serial=111213 08:51:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:51:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:51:39 Point started: ret=0 08:51:39 point_skyscan result=0 08:51:40 Check angles 08:51:40 SkyScan query 08:51:40 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.325<-21555 Statuses=0009 0009 08:51:40 Msec=0 True Az=135.885 Ze=-143.325 Az status=0009 Ze status=0009 08:51:40 Check angles 08:51:40 SkyScan query 08:51:41 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.905<-20127 Statuses=0009 0009 08:51:41 Msec=750 True Az=153.81 Ze=-121.905 Az status=0009 Ze status=0009 08:51:41 Check angles 08:51:41 SkyScan query 08:51:42 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.515<-18701 Statuses=0009 0009 08:51:42 Msec=1500 True Az=171.63 Ze=-100.515 Az status=0009 Ze status=0009 08:51:42 Check angles 08:51:42 SkyScan query 08:51:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 08:51:42 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 08:51:43 Check angles 08:51:43 SkyScan query 08:51:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 08:51:43 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 08:51:43 Check angles 08:51:43 SkyScan query 08:51:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 08:51:44 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 08:51:44 Message to Master queued w/err=0: serial=111213 error=0 08:51:49 Received message from Master: op=Filter serial=111214 08:51:49 Color wheel filter change from 0 to 0 08:51:49 FLIGetFilterPos err=0 currentPosition=0 08:51:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:49 Filter is already there-color wheel unchanged 08:51:49 Received message from Master: op=Shutter serial=111215 08:51:49 Shutter LASER close 08:51:49 Received message from Camera: op=State serial=111217 08:51:49 GetSingleValue result=40 Value=cccccccc 08:51:49 SkyScan query 08:51:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:51:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:50 Parameters OK 08:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:50 Set A/D data flow result=40 08:51:50 Set A/D channel type result=40 08:51:50 Set A/D encoding result=40 08:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:50 Set channel filter=0.000000e+000 result=40 08:51:50 Config A/D Result=40 08:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:50 Get A/D filter: -9.255963e+061 result=40 08:51:50 Get A/D value=-858993460 result=40 08:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:50 Parameters OK 08:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:50 Set A/D data flow result=40 08:51:50 Set A/D channel type result=40 08:51:50 Set A/D encoding result=40 08:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:50 Set channel filter=0.000000e+000 result=40 08:51:50 Config A/D Result=40 08:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:50 Get A/D filter: -9.255963e+061 result=40 08:51:50 Get A/D value=-858993460 result=40 08:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:50 Aux= 08:51:50 Message to Camera, serial 111217 queued 08:52:27 Received message from Master: op=PointingHead serial=111230 08:52:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:52:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:52:27 Point started: ret=0 08:52:27 point_skyscan result=0 08:52:28 Check angles 08:52:28 SkyScan query 08:52:28 SkyScan query done: ret=0 az=153.21<-10214 ze=-21.975<-13465 Statuses=0009 0009 08:52:28 Msec=0 True Az=153.21 Ze=-21.975 Az status=0009 Ze status=0009 08:52:29 Check angles 08:52:29 SkyScan query 08:52:29 SkyScan query done: ret=0 az=135.765<-9051 ze=-0.975<-12065 Statuses=0009 0009 08:52:29 Msec=750 True Az=135.765 Ze=-0.975 Az status=0009 Ze status=0009 08:52:29 Check angles 08:52:29 SkyScan query 08:52:30 SkyScan query done: ret=0 az=117.765<-7851 ze=20.385<-10641 Statuses=0009 0009 08:52:30 Msec=1500 True Az=117.765 Ze=20.385 Az status=0009 Ze status=0009 08:52:30 Check angles 08:52:30 SkyScan query 08:52:31 SkyScan query done: ret=0 az=100.395<-6693 ze=41.385<-9241 Statuses=0009 0009 08:52:31 Msec=2250 True Az=100.395 Ze=41.385 Az status=0009 Ze status=0009 08:52:31 Check angles 08:52:31 SkyScan query 08:52:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 08:52:31 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 08:52:32 Check angles 08:52:32 SkyScan query 08:52:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:52:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:52:32 Message to Master queued w/err=0: serial=111230 error=0 08:52:37 Received message from Master: op=Filter serial=111231 08:52:37 Color wheel filter change from 0 to 0 08:52:37 FLIGetFilterPos err=0 currentPosition=0 08:52:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:37 Filter is already there-color wheel unchanged 08:52:37 Received message from Master: op=Shutter serial=111232 08:52:37 Shutter LASER close 08:52:37 Received message from Camera: op=State serial=111234 08:52:37 GetSingleValue result=40 Value=cccccccc 08:52:37 SkyScan query 08:52:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:52:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:38 Parameters OK 08:52:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:38 Set A/D data flow result=40 08:52:38 Set A/D channel type result=40 08:52:38 Set A/D encoding result=40 08:52:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:38 Set channel filter=0.000000e+000 result=40 08:52:38 Config A/D Result=40 08:52:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:38 Get A/D filter: -9.255963e+061 result=40 08:52:38 Get A/D value=-858993460 result=40 08:52:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:38 Parameters OK 08:52:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:38 Set A/D data flow result=40 08:52:38 Set A/D channel type result=40 08:52:38 Set A/D encoding result=40 08:52:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:38 Set channel filter=0.000000e+000 result=40 08:52:38 Config A/D Result=40 08:52:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:38 Get A/D filter: -9.255963e+061 result=40 08:52:38 Get A/D value=-858993460 result=40 08:52:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:38 Aux= 08:52:38 Message to Camera, serial 111234 queued 08:53:15 Received message from Master: op=PointingHead serial=111247 08:53:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:53:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:53:15 Point started: ret=0 08:53:15 point_skyscan result=0 08:53:16 Check angles 08:53:16 SkyScan query 08:53:16 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 08:53:16 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 08:53:17 Check angles 08:53:17 SkyScan query 08:53:17 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 08:53:17 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 08:53:17 Check angles 08:53:17 SkyScan query 08:53:18 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 08:53:18 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 08:53:18 Check angles 08:53:18 SkyScan query 08:53:19 SkyScan query done: ret=0 az=161.895<-10793 ze=38.505<-9433 Statuses=0009 0008 08:53:19 Msec=2250 True Az=161.895 Ze=38.505 Az status=0009 Ze status=0008 08:53:19 Check angles 08:53:19 SkyScan query 08:53:20 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:53:20 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:53:20 Check angles 08:53:20 SkyScan query 08:53:20 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:53:20 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:53:20 Message to Master queued w/err=0: serial=111247 error=0 08:53:25 Received message from Master: op=Filter serial=111248 08:53:25 Color wheel filter change from 0 to 0 08:53:25 FLIGetFilterPos err=0 currentPosition=0 08:53:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:25 Filter is already there-color wheel unchanged 08:53:25 Received message from Master: op=Shutter serial=111249 08:53:25 Shutter LASER close 08:53:25 Received message from Camera: op=State serial=111251 08:53:25 GetSingleValue result=40 Value=cccccccc 08:53:25 SkyScan query 08:53:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:53:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:26 Parameters OK 08:53:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:26 Set A/D data flow result=40 08:53:26 Set A/D channel type result=40 08:53:26 Set A/D encoding result=40 08:53:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:26 Set channel filter=0.000000e+000 result=40 08:53:26 Config A/D Result=40 08:53:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:26 Get A/D filter: -9.255963e+061 result=40 08:53:26 Get A/D value=-858993460 result=40 08:53:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:26 Parameters OK 08:53:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:26 Set A/D data flow result=40 08:53:26 Set A/D channel type result=40 08:53:26 Set A/D encoding result=40 08:53:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:26 Set channel filter=0.000000e+000 result=40 08:53:26 Config A/D Result=40 08:53:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:26 Get A/D filter: -9.255963e+061 result=40 08:53:26 Get A/D value=-858993460 result=40 08:53:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:26 Aux= 08:53:26 Message to Camera, serial 111251 queued 08:54:03 Received message from Master: op=PointingHead serial=111264 08:54:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:54:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:54:03 Point started: ret=0 08:54:03 point_skyscan result=0 08:54:04 Check angles 08:54:04 SkyScan query 08:54:05 SkyScan query done: ret=0 az=153.12<-10208 ze=8.805<-11413 Statuses=0009 0009 08:54:05 Msec=0 True Az=153.12 Ze=8.805 Az status=0009 Ze status=0009 08:54:05 Check angles 08:54:05 SkyScan query 08:54:05 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.18<-12812 Statuses=0009 0009 08:54:05 Msec=750 True Az=135.66 Ze=-12.18 Az status=0009 Ze status=0009 08:54:05 Check angles 08:54:05 SkyScan query 08:54:06 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.525<-14235 Statuses=0009 0009 08:54:06 Msec=1500 True Az=117.75 Ze=-33.525 Az status=0009 Ze status=0009 08:54:06 Check angles 08:54:06 SkyScan query 08:54:07 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 08:54:07 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 08:54:07 Check angles 08:54:07 SkyScan query 08:54:08 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:54:08 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:54:08 Check angles 08:54:08 SkyScan query 08:54:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:54:08 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:54:08 Message to Master queued w/err=0: serial=111264 error=0 08:54:13 Received message from Master: op=Filter serial=111265 08:54:13 Color wheel filter change from 0 to 0 08:54:13 FLIGetFilterPos err=0 currentPosition=0 08:54:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:13 Filter is already there-color wheel unchanged 08:54:13 Received message from Master: op=Shutter serial=111266 08:54:13 Shutter LASER close 08:54:14 Received message from Camera: op=State serial=111268 08:54:14 GetSingleValue result=40 Value=cccccccc 08:54:14 SkyScan query 08:54:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:54:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:14 Parameters OK 08:54:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:14 Set A/D data flow result=40 08:54:14 Set A/D channel type result=40 08:54:14 Set A/D encoding result=40 08:54:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:14 Set channel filter=0.000000e+000 result=40 08:54:14 Config A/D Result=40 08:54:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:14 Get A/D filter: -9.255963e+061 result=40 08:54:14 Get A/D value=-858993460 result=40 08:54:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:14 Parameters OK 08:54:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:14 Set A/D data flow result=40 08:54:14 Set A/D channel type result=40 08:54:14 Set A/D encoding result=40 08:54:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:14 Set channel filter=0.000000e+000 result=40 08:54:14 Config A/D Result=40 08:54:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:14 Get A/D filter: -9.255963e+061 result=40 08:54:14 Get A/D value=-858993460 result=40 08:54:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:14 Aux= 08:54:14 Message to Camera, serial 111268 queued 08:54:51 Received message from Master: op=PointingHead serial=111281 08:54:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:54:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:54:51 Point started: ret=0 08:54:51 point_skyscan result=0 08:54:52 Check angles 08:54:52 SkyScan query 08:54:53 SkyScan query done: ret=0 az=109.665<-7311 ze=-81.855<-17457 Statuses=0009 0009 08:54:53 Msec=0 True Az=109.665 Ze=-81.855 Az status=0009 Ze status=0009 08:54:53 Check angles 08:54:53 SkyScan query 08:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 08:54:53 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 08:54:54 Check angles 08:54:54 SkyScan query 08:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 08:54:54 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 08:54:54 Check angles 08:54:54 SkyScan query 08:54:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 08:54:55 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 08:54:55 Check angles 08:54:55 SkyScan query 08:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.63<-23042 Statuses=0008 0009 08:54:56 Msec=3000 True Az=112.995 Ze=-165.63 Az status=0008 Ze status=0009 08:54:56 Check angles 08:54:56 SkyScan query 08:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:54:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:54:56 Message to Master queued w/err=0: serial=111281 error=0 08:55:01 Received message from Master: op=Filter serial=111282 08:55:01 Color wheel filter change from 0 to 0 08:55:01 FLIGetFilterPos err=0 currentPosition=0 08:55:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:01 Filter is already there-color wheel unchanged 08:55:02 Received message from Master: op=Shutter serial=111283 08:55:02 Shutter LASER open 08:55:02 Received message from Camera: op=State serial=111285 08:55:02 GetSingleValue result=40 Value=cccccccc 08:55:02 SkyScan query 08:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:55:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:02 Parameters OK 08:55:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:02 Set A/D data flow result=40 08:55:02 Set A/D channel type result=40 08:55:02 Set A/D encoding result=40 08:55:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:02 Set channel filter=0.000000e+000 result=40 08:55:02 Config A/D Result=40 08:55:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:02 Get A/D filter: -9.255963e+061 result=40 08:55:02 Get A/D value=-858993460 result=40 08:55:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:02 Parameters OK 08:55:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:02 Set A/D data flow result=40 08:55:02 Set A/D channel type result=40 08:55:02 Set A/D encoding result=40 08:55:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:02 Set channel filter=0.000000e+000 result=40 08:55:02 Config A/D Result=40 08:55:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:02 Get A/D filter: -9.255963e+061 result=40 08:55:02 Get A/D value=-858993460 result=40 08:55:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:02 Aux= 08:55:02 Message to Camera, serial 111285 queued 08:55:11 Received message from Master: op=Shutter serial=111295 08:55:11 Shutter LASER close 08:55:11 Received message from Master: op=PointingHead serial=111299 08:55:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:55:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:55:12 Point started: ret=0 08:55:12 point_skyscan result=0 08:55:12 Check angles 08:55:12 SkyScan query 08:55:13 SkyScan query done: ret=0 az=89.61<-5974 ze=156.765<-1549 Statuses=0009 0009 08:55:13 Msec=0 True Az=89.61 Ze=156.765 Az status=0009 Ze status=0009 08:55:13 Check angles 08:55:13 SkyScan query 08:55:14 SkyScan query done: ret=0 az=72.06<-4804 ze=135.795<-2947 Statuses=0009 0009 08:55:14 Msec=750 True Az=72.06 Ze=135.795 Az status=0009 Ze status=0009 08:55:14 Check angles 08:55:14 SkyScan query 08:55:14 SkyScan query done: ret=0 az=54.765<-3651 ze=114.75<-4350 Statuses=0009 0009 08:55:14 Msec=1500 True Az=54.765 Ze=114.75 Az status=0009 Ze status=0009 08:55:15 Check angles 08:55:15 SkyScan query 08:55:15 SkyScan query done: ret=0 az=40.89<-2726 ze=93.87<-5742 Statuses=0009 0009 08:55:15 Msec=2250 True Az=40.89 Ze=93.87 Az status=0009 Ze status=0009 08:55:15 Check angles 08:55:15 SkyScan query 08:55:16 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 08:55:16 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 08:55:16 Check angles 08:55:16 SkyScan query 08:55:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 08:55:17 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 08:55:17 Check angles 08:55:17 SkyScan query 08:55:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:55:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:55:17 Message to Master queued w/err=0: serial=111299 error=0 08:55:22 Received message from Master: op=Filter serial=111300 08:55:22 Color wheel filter change from 0 to 0 08:55:22 FLIGetFilterPos err=0 currentPosition=0 08:55:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:22 Filter is already there-color wheel unchanged 08:55:23 Received message from Master: op=Shutter serial=111301 08:55:23 Shutter LASER close 08:55:23 Received message from Camera: op=State serial=111303 08:55:23 GetSingleValue result=40 Value=cccccccc 08:55:23 SkyScan query 08:55:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:55:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:23 Parameters OK 08:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:23 Set A/D data flow result=40 08:55:23 Set A/D channel type result=40 08:55:23 Set A/D encoding result=40 08:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:23 Set channel filter=0.000000e+000 result=40 08:55:23 Config A/D Result=40 08:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:23 Get A/D filter: -9.255963e+061 result=40 08:55:23 Get A/D value=-858993460 result=40 08:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:23 Parameters OK 08:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:23 Set A/D data flow result=40 08:55:23 Set A/D channel type result=40 08:55:23 Set A/D encoding result=40 08:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:23 Set channel filter=0.000000e+000 result=40 08:55:23 Config A/D Result=40 08:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:23 Get A/D filter: -9.255963e+061 result=40 08:55:23 Get A/D value=-858993460 result=40 08:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:23 Aux= 08:55:23 Message to Camera, serial 111303 queued [UTC 2018-12-13 08:55:52] 08:56:00 Received message from Master: op=PointingHead serial=111316 08:56:00 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:56:00 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:56:00 Point started: ret=0 08:56:00 point_skyscan result=0 08:56:01 Check angles 08:56:01 SkyScan query 08:56:02 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 08:56:02 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 08:56:02 Check angles 08:56:02 SkyScan query 08:56:03 SkyScan query done: ret=0 az=81.18<-5412 ze=66.495<-7567 Statuses=0009 0008 08:56:03 Msec=750 True Az=81.18 Ze=66.495 Az status=0009 Ze status=0008 08:56:03 Check angles 08:56:03 SkyScan query 08:56:03 SkyScan query done: ret=0 az=98.67<-6578 ze=66.495<-7567 Statuses=0009 0008 08:56:03 Msec=1500 True Az=98.67 Ze=66.495 Az status=0009 Ze status=0008 08:56:03 Check angles 08:56:03 SkyScan query 08:56:04 SkyScan query done: ret=0 az=116.205<-7747 ze=66.495<-7567 Statuses=0009 0008 08:56:04 Msec=2250 True Az=116.205 Ze=66.495 Az status=0009 Ze status=0008 08:56:04 Check angles 08:56:04 SkyScan query 08:56:05 SkyScan query done: ret=0 az=133.785<-8919 ze=66.495<-7567 Statuses=0009 0008 08:56:05 Msec=3000 True Az=133.785 Ze=66.495 Az status=0009 Ze status=0008 08:56:05 Check angles 08:56:05 SkyScan query 08:56:06 SkyScan query done: ret=0 az=151.095<-10073 ze=66.495<-7567 Statuses=0009 0008 08:56:06 Msec=3750 True Az=151.095 Ze=66.495 Az status=0009 Ze status=0008 08:56:06 Check angles 08:56:06 SkyScan query 08:56:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:56:06 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 08:56:06 Message to Master queued w/err=0: serial=111316 error=0 08:56:11 Received message from Master: op=Filter serial=111317 08:56:11 Color wheel filter change from 0 to 0 08:56:11 FLIGetFilterPos err=0 currentPosition=0 08:56:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:11 Filter is already there-color wheel unchanged 08:56:11 Received message from Master: op=Shutter serial=111318 08:56:11 Shutter LASER close 08:56:11 Received message from Camera: op=State serial=111320 08:56:11 GetSingleValue result=40 Value=cccccccc 08:56:11 SkyScan query 08:56:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:56:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:12 Parameters OK 08:56:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:12 Set A/D data flow result=40 08:56:12 Set A/D channel type result=40 08:56:12 Set A/D encoding result=40 08:56:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:12 Set channel filter=0.000000e+000 result=40 08:56:12 Config A/D Result=40 08:56:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:12 Get A/D filter: -9.255963e+061 result=40 08:56:12 Get A/D value=-858993460 result=40 08:56:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:12 Parameters OK 08:56:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:12 Set A/D data flow result=40 08:56:12 Set A/D channel type result=40 08:56:12 Set A/D encoding result=40 08:56:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:12 Set channel filter=0.000000e+000 result=40 08:56:12 Config A/D Result=40 08:56:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:12 Get A/D filter: -9.255963e+061 result=40 08:56:12 Get A/D value=-858993460 result=40 08:56:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:12 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:12 Aux= 08:56:12 Message to Camera, serial 111320 queued 08:56:48 Received message from Master: op=PointingHead serial=111332 08:56:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:56:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:56:48 Point started: ret=0 08:56:48 point_skyscan result=0 08:56:49 Check angles 08:56:49 SkyScan query 08:56:50 SkyScan query done: ret=0 az=134.595<-8973 ze=36.585<-9561 Statuses=0009 0009 08:56:50 Msec=0 True Az=134.595 Ze=36.585 Az status=0009 Ze status=0009 08:56:50 Check angles 08:56:50 SkyScan query 08:56:50 SkyScan query done: ret=0 az=117.165<-7811 ze=15.645<-10957 Statuses=0009 0009 08:56:50 Msec=750 True Az=117.165 Ze=15.645 Az status=0009 Ze status=0009 08:56:51 Check angles 08:56:51 SkyScan query 08:56:51 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.34<-12356 Statuses=0009 0009 08:56:51 Msec=1500 True Az=99.885 Ze=-5.34 Az status=0009 Ze status=0009 08:56:51 Check angles 08:56:51 SkyScan query 08:56:52 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.265<-13751 Statuses=0009 0009 08:56:52 Msec=2250 True Az=82.335 Ze=-26.265 Az status=0009 Ze status=0009 08:56:52 Check angles 08:56:52 SkyScan query 08:56:53 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.565<-14571 Statuses=0009 0008 08:56:53 Msec=3000 True Az=64.92 Ze=-38.565 Az status=0009 Ze status=0008 08:56:53 Check angles 08:56:53 SkyScan query 08:56:53 SkyScan query done: ret=0 az=47.46<-3164 ze=-38.535<-14569 Statuses=0009 0008 08:56:53 Msec=3750 True Az=47.46 Ze=-38.535 Az status=0009 Ze status=0008 08:56:54 Check angles 08:56:54 SkyScan query 08:56:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:56:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:56:54 Message to Master queued w/err=0: serial=111332 error=0 08:56:59 Received message from Master: op=Filter serial=111333 08:56:59 Color wheel filter change from 0 to 0 08:56:59 FLIGetFilterPos err=0 currentPosition=0 08:56:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:59 Filter is already there-color wheel unchanged 08:56:59 Received message from Master: op=Shutter serial=111334 08:56:59 Shutter LASER close 08:56:59 Received message from Camera: op=State serial=111336 08:56:59 GetSingleValue result=40 Value=cccccccc 08:56:59 SkyScan query 08:57:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:57:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:00 Parameters OK 08:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:00 Set A/D data flow result=40 08:57:00 Set A/D channel type result=40 08:57:00 Set A/D encoding result=40 08:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:00 Set channel filter=0.000000e+000 result=40 08:57:00 Config A/D Result=40 08:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:00 Get A/D filter: -9.255963e+061 result=40 08:57:00 Get A/D value=-858993460 result=40 08:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:00 Parameters OK 08:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:00 Set A/D data flow result=40 08:57:00 Set A/D channel type result=40 08:57:00 Set A/D encoding result=40 08:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:00 Set channel filter=0.000000e+000 result=40 08:57:00 Config A/D Result=40 08:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:00 Get A/D filter: -9.255963e+061 result=40 08:57:00 Get A/D value=-858993460 result=40 08:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:00 Aux= 08:57:00 Message to Camera, serial 111336 queued 08:57:37 Received message from Master: op=PointingHead serial=111349 08:57:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:57:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:57:37 Point started: ret=0 08:57:37 point_skyscan result=0 08:57:38 Check angles 08:57:38 SkyScan query 08:57:38 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.16<-16544 Statuses=0009 0009 08:57:38 Msec=0 True Az=63.87 Ze=-68.16 Az status=0009 Ze status=0009 08:57:39 Check angles 08:57:39 SkyScan query 08:57:39 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.58<-17972 Statuses=0009 0009 08:57:39 Msec=750 True Az=81.645 Ze=-89.58 Az status=0009 Ze status=0009 08:57:39 Check angles 08:57:39 SkyScan query 08:57:40 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.565<-19371 Statuses=0009 0009 08:57:40 Msec=1500 True Az=99.165 Ze=-110.565 Az status=0009 Ze status=0009 08:57:40 Check angles 08:57:40 SkyScan query 08:57:41 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.475<-20765 Statuses=0009 0009 08:57:41 Msec=2250 True Az=116.67 Ze=-131.475 Az status=0009 Ze status=0009 08:57:41 Check angles 08:57:41 SkyScan query 08:57:41 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 08:57:41 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 08:57:42 Check angles 08:57:42 SkyScan query 08:57:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:57:42 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:57:42 Message to Master queued w/err=0: serial=111349 error=0 08:57:47 Received message from Master: op=Filter serial=111350 08:57:47 Color wheel filter change from 0 to 0 08:57:47 FLIGetFilterPos err=0 currentPosition=0 08:57:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:47 Filter is already there-color wheel unchanged 08:57:47 Received message from Master: op=Shutter serial=111351 08:57:47 Shutter LASER close 08:57:47 Received message from Camera: op=State serial=111353 08:57:47 GetSingleValue result=40 Value=cccccccc 08:57:47 SkyScan query 08:57:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:57:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:48 Parameters OK 08:57:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:48 Set A/D data flow result=40 08:57:48 Set A/D channel type result=40 08:57:48 Set A/D encoding result=40 08:57:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:48 Set channel filter=0.000000e+000 result=40 08:57:48 Config A/D Result=40 08:57:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:48 Get A/D filter: -9.255963e+061 result=40 08:57:48 Get A/D value=-858993460 result=40 08:57:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:48 Parameters OK 08:57:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:48 Set A/D data flow result=40 08:57:48 Set A/D channel type result=40 08:57:48 Set A/D encoding result=40 08:57:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:48 Set channel filter=0.000000e+000 result=40 08:57:48 Config A/D Result=40 08:57:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:48 Get A/D filter: -9.255963e+061 result=40 08:57:48 Get A/D value=-858993460 result=40 08:57:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:48 Aux= 08:57:48 Message to Camera, serial 111353 queued 08:58:25 Received message from Master: op=PointingHead serial=111366 08:58:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:58:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:58:25 Point started: ret=0 08:58:25 point_skyscan result=0 08:58:26 Check angles 08:58:26 SkyScan query 08:58:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 08:58:26 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 08:58:27 Check angles 08:58:27 SkyScan query 08:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:58:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:58:27 Message to Master queued w/err=0: serial=111366 error=0 08:58:32 Received message from Master: op=Filter serial=111367 08:58:32 Color wheel filter change from 0 to 0 08:58:32 FLIGetFilterPos err=0 currentPosition=0 08:58:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:32 Filter is already there-color wheel unchanged 08:58:32 Received message from Master: op=Shutter serial=111368 08:58:32 Shutter LASER open 08:58:33 Received message from Camera: op=State serial=111370 08:58:33 GetSingleValue result=40 Value=cccccccc 08:58:33 SkyScan query 08:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:58:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:33 Parameters OK 08:58:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:33 Set A/D data flow result=40 08:58:33 Set A/D channel type result=40 08:58:33 Set A/D encoding result=40 08:58:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:33 Set channel filter=0.000000e+000 result=40 08:58:33 Config A/D Result=40 08:58:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:33 Get A/D filter: -9.255963e+061 result=40 08:58:33 Get A/D value=-858993460 result=40 08:58:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:33 Parameters OK 08:58:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:33 Set A/D data flow result=40 08:58:33 Set A/D channel type result=40 08:58:33 Set A/D encoding result=40 08:58:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:33 Set channel filter=0.000000e+000 result=40 08:58:33 Config A/D Result=40 08:58:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:33 Get A/D filter: -9.255963e+061 result=40 08:58:33 Get A/D value=-858993460 result=40 08:58:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:33 Aux= 08:58:33 Message to Camera, serial 111370 queued 08:58:42 Received message from Master: op=Shutter serial=111380 08:58:42 Shutter LASER close 08:58:42 Received message from Master: op=PointingHead serial=111384 08:58:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:58:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:58:43 Point started: ret=0 08:58:43 point_skyscan result=0 08:58:43 Check angles 08:58:43 SkyScan query 08:58:44 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.025<-21535 Statuses=0009 0009 08:58:44 Msec=0 True Az=136.155 Ze=-143.025 Az status=0009 Ze status=0009 08:58:44 Check angles 08:58:44 SkyScan query 08:58:45 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.055<-20137 Statuses=0009 0009 08:58:45 Msec=750 True Az=153.6 Ze=-122.055 Az status=0009 Ze status=0009 08:58:45 Check angles 08:58:45 SkyScan query 08:58:45 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.16<-18744 Statuses=0009 0009 08:58:45 Msec=1500 True Az=171.075 Ze=-101.16 Az status=0009 Ze status=0009 08:58:46 Check angles 08:58:46 SkyScan query 08:58:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.77<-17318 Statuses=0008 0009 08:58:46 Msec=2250 True Az=176.01 Ze=-79.77 Az status=0008 Ze status=0009 08:58:46 Check angles 08:58:46 SkyScan query 08:58:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.74<-15916 Statuses=0008 0009 08:58:47 Msec=3000 True Az=176.01 Ze=-58.74 Az status=0008 Ze status=0009 08:58:47 Check angles 08:58:47 SkyScan query 08:58:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:58:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:58:48 Message to Master queued w/err=0: serial=111384 error=0 08:58:53 Received message from Master: op=Filter serial=111385 08:58:53 Color wheel filter change from 0 to 0 08:58:53 FLIGetFilterPos err=0 currentPosition=0 08:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:53 Filter is already there-color wheel unchanged 08:58:53 Received message from Master: op=Shutter serial=111386 08:58:53 Shutter LASER close 08:58:53 Received message from Camera: op=State serial=111388 08:58:53 GetSingleValue result=40 Value=cccccccc 08:58:53 SkyScan query 08:58:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:54 Parameters OK 08:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:54 Set A/D data flow result=40 08:58:54 Set A/D channel type result=40 08:58:54 Set A/D encoding result=40 08:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:54 Set channel filter=0.000000e+000 result=40 08:58:54 Config A/D Result=40 08:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:54 Get A/D filter: -9.255963e+061 result=40 08:58:54 Get A/D value=-858993460 result=40 08:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:54 Parameters OK 08:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:54 Set A/D data flow result=40 08:58:54 Set A/D channel type result=40 08:58:54 Set A/D encoding result=40 08:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:54 Set channel filter=0.000000e+000 result=40 08:58:54 Config A/D Result=40 08:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:54 Get A/D filter: -9.255963e+061 result=40 08:58:54 Get A/D value=-858993460 result=40 08:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:54 Aux= 08:58:54 Message to Camera, serial 111388 queued 08:59:30 Received message from Master: op=PointingHead serial=111401 08:59:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:59:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:59:31 Point started: ret=0 08:59:31 point_skyscan result=0 08:59:32 Check angles 08:59:32 SkyScan query 08:59:32 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.39<-13426 Statuses=0009 0009 08:59:32 Msec=0 True Az=152.745 Ze=-21.39 Az status=0009 Ze status=0009 08:59:32 Check angles 08:59:32 SkyScan query 08:59:33 SkyScan query done: ret=0 az=134.895<-8993 ze=-0<-12000 Statuses=0009 0009 08:59:33 Msec=750 True Az=134.895 Ze=-0 Az status=0009 Ze status=0009 08:59:33 Check angles 08:59:33 SkyScan query 08:59:34 SkyScan query done: ret=0 az=117.42<-7828 ze=20.97<-10602 Statuses=0009 0009 08:59:34 Msec=1500 True Az=117.42 Ze=20.97 Az status=0009 Ze status=0009 08:59:34 Check angles 08:59:34 SkyScan query 08:59:34 SkyScan query done: ret=0 az=100.005<-6667 ze=41.91<-9206 Statuses=0009 0009 08:59:34 Msec=2250 True Az=100.005 Ze=41.91 Az status=0009 Ze status=0009 08:59:35 Check angles 08:59:35 SkyScan query 08:59:35 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 08:59:35 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 08:59:35 Check angles 08:59:35 SkyScan query 08:59:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:59:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:59:36 Message to Master queued w/err=0: serial=111401 error=0 08:59:41 Received message from Master: op=Filter serial=111402 08:59:41 Color wheel filter change from 0 to 0 08:59:41 FLIGetFilterPos err=0 currentPosition=0 08:59:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:41 Filter is already there-color wheel unchanged 08:59:41 Received message from Master: op=Shutter serial=111403 08:59:41 Shutter LASER close 08:59:41 Received message from Camera: op=State serial=111405 08:59:41 GetSingleValue result=40 Value=cccccccc 08:59:41 SkyScan query 08:59:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:59:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:42 Parameters OK 08:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:42 Set A/D data flow result=40 08:59:42 Set A/D channel type result=40 08:59:42 Set A/D encoding result=40 08:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:42 Set channel filter=0.000000e+000 result=40 08:59:42 Config A/D Result=40 08:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:42 Get A/D filter: -9.255963e+061 result=40 08:59:42 Get A/D value=-858993460 result=40 08:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:42 Parameters OK 08:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:42 Set A/D data flow result=40 08:59:42 Set A/D channel type result=40 08:59:42 Set A/D encoding result=40 08:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:42 Set channel filter=0.000000e+000 result=40 08:59:42 Config A/D Result=40 08:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:42 Get A/D filter: -9.255963e+061 result=40 08:59:42 Get A/D value=-858993460 result=40 08:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:42 Aux= 08:59:42 Message to Camera, serial 111405 queued 09:00:19 Received message from Master: op=PointingHead serial=111418 09:00:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:00:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:00:19 Point started: ret=0 09:00:19 point_skyscan result=0 09:00:20 Check angles 09:00:20 SkyScan query 09:00:20 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 09:00:20 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 09:00:20 Check angles 09:00:20 SkyScan query 09:00:21 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 09:00:21 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 09:00:21 Check angles 09:00:21 SkyScan query 09:00:22 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 09:00:22 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 09:00:22 Check angles 09:00:22 SkyScan query 09:00:22 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 09:00:22 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 09:00:23 Check angles 09:00:23 SkyScan query 09:00:23 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:00:23 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:00:23 Check angles 09:00:23 SkyScan query 09:00:24 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:00:24 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:00:24 Message to Master queued w/err=0: serial=111418 error=0 09:00:29 Received message from Master: op=Filter serial=111419 09:00:29 Color wheel filter change from 0 to 0 09:00:29 FLIGetFilterPos err=0 currentPosition=0 09:00:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:29 Filter is already there-color wheel unchanged 09:00:29 Received message from Master: op=Shutter serial=111420 09:00:29 Shutter LASER close 09:00:29 Received message from Camera: op=State serial=111422 09:00:29 GetSingleValue result=40 Value=cccccccc 09:00:29 SkyScan query 09:00:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:00:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:30 Parameters OK 09:00:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:30 Set A/D data flow result=40 09:00:30 Set A/D channel type result=40 09:00:30 Set A/D encoding result=40 09:00:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:30 Set channel filter=0.000000e+000 result=40 09:00:30 Config A/D Result=40 09:00:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:30 Get A/D filter: -9.255963e+061 result=40 09:00:30 Get A/D value=-858993460 result=40 09:00:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:30 Parameters OK 09:00:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:30 Set A/D data flow result=40 09:00:30 Set A/D channel type result=40 09:00:30 Set A/D encoding result=40 09:00:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:30 Set channel filter=0.000000e+000 result=40 09:00:30 Config A/D Result=40 09:00:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:30 Get A/D filter: -9.255963e+061 result=40 09:00:30 Get A/D value=-858993460 result=40 09:00:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:30 Aux= 09:00:30 Message to Camera, serial 111422 queued 09:01:07 Received message from Master: op=PointingHead serial=111435 09:01:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:01:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:01:07 Point started: ret=0 09:01:07 point_skyscan result=0 09:01:08 Check angles 09:01:08 SkyScan query 09:01:08 SkyScan query done: ret=0 az=152.955<-10197 ze=8.655<-11423 Statuses=0009 0009 09:01:08 Msec=0 True Az=152.955 Ze=8.655 Az status=0009 Ze status=0009 09:01:09 Check angles 09:01:09 SkyScan query 09:01:09 SkyScan query done: ret=0 az=135.57<-9038 ze=-12.285<-12819 Statuses=0009 0009 09:01:09 Msec=750 True Az=135.57 Ze=-12.285 Az status=0009 Ze status=0009 09:01:09 Check angles 09:01:09 SkyScan query 09:01:10 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.21<-14214 Statuses=0009 0009 09:01:10 Msec=1500 True Az=118.02 Ze=-33.21 Az status=0009 Ze status=0009 09:01:10 Check angles 09:01:10 SkyScan query 09:01:11 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.525<-15435 Statuses=0009 0009 09:01:11 Msec=2250 True Az=100.62 Ze=-51.525 Az status=0009 Ze status=0009 09:01:11 Check angles 09:01:11 SkyScan query 09:01:11 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 09:01:11 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 09:01:12 Check angles 09:01:12 SkyScan query 09:01:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:01:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:01:12 Message to Master queued w/err=0: serial=111435 error=0 09:01:17 Received message from Master: op=Filter serial=111436 09:01:17 Color wheel filter change from 0 to 0 09:01:17 FLIGetFilterPos err=0 currentPosition=0 09:01:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:17 Filter is already there-color wheel unchanged 09:01:17 Received message from Master: op=Shutter serial=111437 09:01:17 Shutter LASER close 09:01:17 Received message from Camera: op=State serial=111439 09:01:17 GetSingleValue result=40 Value=cccccccc 09:01:17 SkyScan query 09:01:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:01:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:18 Parameters OK 09:01:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:18 Set A/D data flow result=40 09:01:18 Set A/D channel type result=40 09:01:18 Set A/D encoding result=40 09:01:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:18 Set channel filter=0.000000e+000 result=40 09:01:18 Config A/D Result=40 09:01:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:18 Get A/D filter: -9.255963e+061 result=40 09:01:18 Get A/D value=-858993460 result=40 09:01:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:18 Parameters OK 09:01:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:18 Set A/D data flow result=40 09:01:18 Set A/D channel type result=40 09:01:18 Set A/D encoding result=40 09:01:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:18 Set channel filter=0.000000e+000 result=40 09:01:18 Config A/D Result=40 09:01:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:18 Get A/D filter: -9.255963e+061 result=40 09:01:18 Get A/D value=-858993460 result=40 09:01:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:18 Aux= 09:01:18 Message to Camera, serial 111439 queued 09:01:55 Received message from Master: op=PointingHead serial=111452 09:01:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:01:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:01:55 Point started: ret=0 09:01:55 point_skyscan result=0 09:01:56 Check angles 09:01:56 SkyScan query 09:01:56 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.705<-17447 Statuses=0009 0009 09:01:56 Msec=0 True Az=109.335 Ze=-81.705 Az status=0009 Ze status=0009 09:01:57 Check angles 09:01:57 SkyScan query 09:01:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 09:01:57 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 09:01:57 Check angles 09:01:57 SkyScan query 09:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 09:01:58 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 09:01:58 Check angles 09:01:58 SkyScan query 09:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 09:01:59 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 09:01:59 Check angles 09:01:59 SkyScan query 09:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 09:01:59 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 09:02:00 Check angles 09:02:00 SkyScan query 09:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:02:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:02:00 Message to Master queued w/err=0: serial=111452 error=0 09:02:05 Received message from Master: op=Filter serial=111453 09:02:05 Color wheel filter change from 0 to 0 09:02:05 FLIGetFilterPos err=0 currentPosition=0 09:02:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:05 Filter is already there-color wheel unchanged 09:02:05 Received message from Master: op=Shutter serial=111454 09:02:05 Shutter LASER open 09:02:06 Received message from Camera: op=State serial=111456 09:02:06 GetSingleValue result=40 Value=cccccccc 09:02:06 SkyScan query 09:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:02:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:06 Parameters OK 09:02:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:06 Set A/D data flow result=40 09:02:06 Set A/D channel type result=40 09:02:06 Set A/D encoding result=40 09:02:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:06 Set channel filter=0.000000e+000 result=40 09:02:06 Config A/D Result=40 09:02:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:06 Get A/D filter: -9.255963e+061 result=40 09:02:06 Get A/D value=-858993460 result=40 09:02:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:06 Parameters OK 09:02:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:06 Set A/D data flow result=40 09:02:06 Set A/D channel type result=40 09:02:06 Set A/D encoding result=40 09:02:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:06 Set channel filter=0.000000e+000 result=40 09:02:06 Config A/D Result=40 09:02:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:06 Get A/D filter: -9.255963e+061 result=40 09:02:06 Get A/D value=-858993460 result=40 09:02:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:06 Aux= 09:02:06 Message to Camera, serial 111456 queued 09:02:15 Received message from Master: op=Shutter serial=111466 09:02:15 Shutter LASER close 09:02:15 Received message from Master: op=PointingHead serial=111470 09:02:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:02:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:02:15 Point started: ret=0 09:02:15 point_skyscan result=0 09:02:16 Check angles 09:02:16 SkyScan query 09:02:17 SkyScan query done: ret=0 az=89.655<-5977 ze=157.14<-1524 Statuses=0009 0009 09:02:17 Msec=0 True Az=89.655 Ze=157.14 Az status=0009 Ze status=0009 09:02:17 Check angles 09:02:17 SkyScan query 09:02:17 SkyScan query done: ret=0 az=71.82<-4788 ze=135.72<-2952 Statuses=0009 0009 09:02:17 Msec=750 True Az=71.82 Ze=135.72 Az status=0009 Ze status=0009 09:02:18 Check angles 09:02:18 SkyScan query 09:02:18 SkyScan query done: ret=0 az=54.21<-3614 ze=114.285<-4381 Statuses=0009 0009 09:02:18 Msec=1500 True Az=54.21 Ze=114.285 Az status=0009 Ze status=0009 09:02:18 Check angles 09:02:18 SkyScan query 09:02:19 SkyScan query done: ret=0 az=40.965<-2731 ze=93.39<-5774 Statuses=0009 0009 09:02:19 Msec=2250 True Az=40.965 Ze=93.39 Az status=0009 Ze status=0009 09:02:19 Check angles 09:02:19 SkyScan query 09:02:20 SkyScan query done: ret=0 az=40.995<-2733 ze=71.985<-7201 Statuses=0008 0009 09:02:20 Msec=3000 True Az=40.995 Ze=71.985 Az status=0008 Ze status=0009 09:02:20 Check angles 09:02:20 SkyScan query 09:02:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.915<-8539 Statuses=0008 0009 09:02:21 Msec=3750 True Az=40.995 Ze=51.915 Az status=0008 Ze status=0009 09:02:21 Check angles 09:02:21 SkyScan query 09:02:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:02:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:02:21 Message to Master queued w/err=0: serial=111470 error=0 09:02:26 Received message from Master: op=Filter serial=111471 09:02:26 Color wheel filter change from 0 to 0 09:02:26 FLIGetFilterPos err=0 currentPosition=0 09:02:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:26 Filter is already there-color wheel unchanged 09:02:26 Received message from Master: op=Shutter serial=111472 09:02:26 Shutter LASER close 09:02:27 Received message from Camera: op=State serial=111474 09:02:27 GetSingleValue result=40 Value=cccccccc 09:02:27 SkyScan query 09:02:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:02:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:27 Parameters OK 09:02:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:27 Set A/D data flow result=40 09:02:27 Set A/D channel type result=40 09:02:27 Set A/D encoding result=40 09:02:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:27 Set channel filter=0.000000e+000 result=40 09:02:27 Config A/D Result=40 09:02:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:27 Get A/D filter: -9.255963e+061 result=40 09:02:27 Get A/D value=-858993460 result=40 09:02:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:27 Parameters OK 09:02:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:27 Set A/D data flow result=40 09:02:27 Set A/D channel type result=40 09:02:27 Set A/D encoding result=40 09:02:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:27 Set channel filter=0.000000e+000 result=40 09:02:27 Config A/D Result=40 09:02:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:27 Get A/D filter: -9.255963e+061 result=40 09:02:27 Get A/D value=-858993460 result=40 09:02:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:27 Aux= 09:02:27 Message to Camera, serial 111474 queued 09:03:04 Received message from Master: op=PointingHead serial=111487 09:03:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:03:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:03:04 Point started: ret=0 09:03:04 point_skyscan result=0 09:03:05 Check angles 09:03:05 SkyScan query 09:03:06 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 09:03:06 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 09:03:06 Check angles 09:03:06 SkyScan query 09:03:06 SkyScan query done: ret=0 az=82.035<-5469 ze=66.495<-7567 Statuses=0009 0008 09:03:06 Msec=750 True Az=82.035 Ze=66.495 Az status=0009 Ze status=0008 09:03:07 Check angles 09:03:07 SkyScan query 09:03:07 SkyScan query done: ret=0 az=99.615<-6641 ze=66.495<-7567 Statuses=0009 0008 09:03:07 Msec=1500 True Az=99.615 Ze=66.495 Az status=0009 Ze status=0008 09:03:07 Check angles 09:03:07 SkyScan query 09:03:08 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 09:03:08 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 09:03:08 Check angles 09:03:08 SkyScan query 09:03:09 SkyScan query done: ret=0 az=134.85<-8990 ze=66.495<-7567 Statuses=0009 0008 09:03:09 Msec=3000 True Az=134.85 Ze=66.495 Az status=0009 Ze status=0008 09:03:09 Check angles 09:03:09 SkyScan query 09:03:09 SkyScan query done: ret=0 az=152.685<-10179 ze=66.495<-7567 Statuses=0009 0008 09:03:09 Msec=3750 True Az=152.685 Ze=66.495 Az status=0009 Ze status=0008 09:03:10 Check angles 09:03:10 SkyScan query 09:03:10 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 09:03:10 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 09:03:10 Message to Master queued w/err=0: serial=111487 error=0 09:03:15 Received message from Master: op=Filter serial=111488 09:03:15 Color wheel filter change from 0 to 0 09:03:15 FLIGetFilterPos err=0 currentPosition=0 09:03:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:15 Filter is already there-color wheel unchanged 09:03:15 Received message from Master: op=Shutter serial=111489 09:03:15 Shutter LASER close 09:03:15 Received message from Camera: op=State serial=111491 09:03:15 GetSingleValue result=40 Value=cccccccc 09:03:15 SkyScan query 09:03:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:03:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:16 Parameters OK 09:03:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:16 Set A/D data flow result=40 09:03:16 Set A/D channel type result=40 09:03:16 Set A/D encoding result=40 09:03:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:16 Set channel filter=0.000000e+000 result=40 09:03:16 Config A/D Result=40 09:03:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:16 Get A/D filter: -9.255963e+061 result=40 09:03:16 Get A/D value=-858993460 result=40 09:03:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:16 Parameters OK 09:03:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:16 Set A/D data flow result=40 09:03:16 Set A/D channel type result=40 09:03:16 Set A/D encoding result=40 09:03:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:16 Set channel filter=0.000000e+000 result=40 09:03:16 Config A/D Result=40 09:03:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:16 Get A/D filter: -9.255963e+061 result=40 09:03:16 Get A/D value=-858993460 result=40 09:03:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:16 Aux= 09:03:16 Message to Camera, serial 111491 queued 09:03:53 Received message from Master: op=PointingHead serial=111504 09:03:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:03:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:03:53 Point started: ret=0 09:03:53 point_skyscan result=0 09:03:54 Check angles 09:03:54 SkyScan query 09:03:55 SkyScan query done: ret=0 az=134.475<-8965 ze=36.21<-9586 Statuses=0009 0009 09:03:55 Msec=0 True Az=134.475 Ze=36.21 Az status=0009 Ze status=0009 09:03:55 Check angles 09:03:55 SkyScan query 09:03:55 SkyScan query done: ret=0 az=117<-7800 ze=15.285<-10981 Statuses=0009 0009 09:03:55 Msec=750 True Az=117 Ze=15.285 Az status=0009 Ze status=0009 09:03:55 Check angles 09:03:55 SkyScan query 09:03:56 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.715<-12381 Statuses=0009 0009 09:03:56 Msec=1500 True Az=99.66 Ze=-5.715 Az status=0009 Ze status=0009 09:03:56 Check angles 09:03:56 SkyScan query 09:03:57 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.655<-13777 Statuses=0009 0009 09:03:57 Msec=2250 True Az=82.125 Ze=-26.655 Az status=0009 Ze status=0009 09:03:57 Check angles 09:03:57 SkyScan query 09:03:58 SkyScan query done: ret=0 az=64.59<-4306 ze=-38.565<-14571 Statuses=0009 0008 09:03:58 Msec=3000 True Az=64.59 Ze=-38.565 Az status=0009 Ze status=0008 09:03:58 Check angles 09:03:58 SkyScan query 09:03:58 SkyScan query done: ret=0 az=46.83<-3122 ze=-38.535<-14569 Statuses=0009 0008 09:03:58 Msec=3750 True Az=46.83 Ze=-38.535 Az status=0009 Ze status=0008 09:03:58 Check angles 09:03:58 SkyScan query 09:03:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:03:59 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:03:59 Message to Master queued w/err=0: serial=111504 error=0 09:04:04 Received message from Master: op=Filter serial=111505 09:04:04 Color wheel filter change from 0 to 0 09:04:04 FLIGetFilterPos err=0 currentPosition=0 09:04:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:04 Filter is already there-color wheel unchanged 09:04:04 Received message from Master: op=Shutter serial=111506 09:04:04 Shutter LASER close 09:04:04 Received message from Camera: op=State serial=111508 09:04:04 GetSingleValue result=40 Value=cccccccc 09:04:04 SkyScan query 09:04:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:04:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:05 Parameters OK 09:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:05 Set A/D data flow result=40 09:04:05 Set A/D channel type result=40 09:04:05 Set A/D encoding result=40 09:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:05 Set channel filter=0.000000e+000 result=40 09:04:05 Config A/D Result=40 09:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:05 Get A/D filter: -9.255963e+061 result=40 09:04:05 Get A/D value=-858993460 result=40 09:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:05 Parameters OK 09:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:05 Set A/D data flow result=40 09:04:05 Set A/D channel type result=40 09:04:05 Set A/D encoding result=40 09:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:05 Set channel filter=0.000000e+000 result=40 09:04:05 Config A/D Result=40 09:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:05 Get A/D filter: -9.255963e+061 result=40 09:04:05 Get A/D value=-858993460 result=40 09:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:05 Aux= 09:04:05 Message to Camera, serial 111508 queued 09:04:42 Received message from Master: op=PointingHead serial=111521 09:04:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:04:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:04:42 Point started: ret=0 09:04:42 point_skyscan result=0 09:04:43 Check angles 09:04:43 SkyScan query 09:04:43 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.175<-16545 Statuses=0009 0009 09:04:43 Msec=0 True Az=63.87 Ze=-68.175 Az status=0009 Ze status=0009 09:04:44 Check angles 09:04:44 SkyScan query 09:04:44 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.535<-17969 Statuses=0009 0009 09:04:44 Msec=750 True Az=81.66 Ze=-89.535 Az status=0009 Ze status=0009 09:04:44 Check angles 09:04:44 SkyScan query 09:04:45 SkyScan query done: ret=0 az=99.57<-6638 ze=-110.91<-19394 Statuses=0009 0009 09:04:45 Msec=1500 True Az=99.57 Ze=-110.91 Az status=0009 Ze status=0009 09:04:45 Check angles 09:04:45 SkyScan query 09:04:46 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.82<-20788 Statuses=0009 0009 09:04:46 Msec=2250 True Az=117.09 Ze=-131.82 Az status=0009 Ze status=0009 09:04:46 Check angles 09:04:46 SkyScan query 09:04:46 SkyScan query done: ret=0 az=131.145<-8743 ze=-141.555<-21437 Statuses=0009 0008 09:04:46 Msec=3000 True Az=131.145 Ze=-141.555 Az status=0009 Ze status=0008 09:04:47 Check angles 09:04:47 SkyScan query 09:04:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 09:04:47 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 09:04:47 Message to Master queued w/err=0: serial=111521 error=0 09:04:52 Received message from Master: op=Filter serial=111522 09:04:52 Color wheel filter change from 0 to 0 09:04:52 FLIGetFilterPos err=0 currentPosition=0 09:04:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:52 Filter is already there-color wheel unchanged 09:04:52 Received message from Master: op=Shutter serial=111523 09:04:52 Shutter LASER close 09:04:52 Received message from Camera: op=State serial=111525 09:04:52 GetSingleValue result=40 Value=cccccccc 09:04:52 SkyScan query 09:04:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:04:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:53 Parameters OK 09:04:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:53 Set A/D data flow result=40 09:04:53 Set A/D channel type result=40 09:04:53 Set A/D encoding result=40 09:04:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:53 Set channel filter=0.000000e+000 result=40 09:04:53 Config A/D Result=40 09:04:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:53 Get A/D filter: -9.255963e+061 result=40 09:04:53 Get A/D value=-858993460 result=40 09:04:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:53 Parameters OK 09:04:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:53 Set A/D data flow result=40 09:04:53 Set A/D channel type result=40 09:04:53 Set A/D encoding result=40 09:04:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:53 Set channel filter=0.000000e+000 result=40 09:04:53 Config A/D Result=40 09:04:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:53 Get A/D filter: -9.255963e+061 result=40 09:04:53 Get A/D value=-858993460 result=40 09:04:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:53 Aux= 09:04:53 Message to Camera, serial 111525 queued 09:05:30 Received message from Master: op=PointingHead serial=111538 09:05:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:05:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:05:30 Point started: ret=0 09:05:30 point_skyscan result=0 09:05:31 Check angles 09:05:31 SkyScan query 09:05:31 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 09:05:31 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 09:05:32 Check angles 09:05:32 SkyScan query 09:05:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:05:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:05:32 Message to Master queued w/err=0: serial=111538 error=0 09:05:37 Received message from Master: op=Filter serial=111539 09:05:37 Color wheel filter change from 0 to 0 09:05:37 FLIGetFilterPos err=0 currentPosition=0 09:05:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:37 Filter is already there-color wheel unchanged 09:05:37 Received message from Master: op=Shutter serial=111540 09:05:37 Shutter LASER open 09:05:38 Received message from Camera: op=State serial=111542 09:05:38 GetSingleValue result=40 Value=cccccccc 09:05:38 SkyScan query 09:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:05:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:38 Parameters OK 09:05:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:38 Set A/D data flow result=40 09:05:38 Set A/D channel type result=40 09:05:38 Set A/D encoding result=40 09:05:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:38 Set channel filter=0.000000e+000 result=40 09:05:38 Config A/D Result=40 09:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:38 Get A/D filter: -9.255963e+061 result=40 09:05:38 Get A/D value=-858993460 result=40 09:05:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:38 Parameters OK 09:05:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:38 Set A/D data flow result=40 09:05:38 Set A/D channel type result=40 09:05:38 Set A/D encoding result=40 09:05:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:38 Set channel filter=0.000000e+000 result=40 09:05:38 Config A/D Result=40 09:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:38 Get A/D filter: -9.255963e+061 result=40 09:05:38 Get A/D value=-858993460 result=40 09:05:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:38 Aux= 09:05:38 Message to Camera, serial 111542 queued 09:05:47 Received message from Master: op=Shutter serial=111552 09:05:47 Shutter LASER close 09:05:47 Received message from Master: op=PointingHead serial=111556 09:05:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:05:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:05:48 Point started: ret=0 09:05:48 point_skyscan result=0 09:05:48 Check angles 09:05:48 SkyScan query 09:05:49 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.77<-21518 Statuses=0009 0009 09:05:49 Msec=0 True Az=136.365 Ze=-142.77 Az status=0009 Ze status=0009 09:05:49 Check angles 09:05:49 SkyScan query [UTC 2018-12-13 09:05:50] 09:05:50 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.785<-20119 Statuses=0009 0009 09:05:50 Msec=750 True Az=153.825 Ze=-121.785 Az status=0009 Ze status=0009 09:05:50 Check angles 09:05:50 SkyScan query 09:05:50 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.77<-18718 Statuses=0009 0009 09:05:50 Msec=1500 True Az=171.27 Ze=-100.77 Az status=0009 Ze status=0009 09:05:51 Check angles 09:05:51 SkyScan query 09:05:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.485<-17299 Statuses=0008 0009 09:05:51 Msec=2250 True Az=176.01 Ze=-79.485 Az status=0008 Ze status=0009 09:05:51 Check angles 09:05:51 SkyScan query 09:05:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.5<-15900 Statuses=0008 0009 09:05:52 Msec=3000 True Az=176.01 Ze=-58.5 Az status=0008 Ze status=0009 09:05:52 Check angles 09:05:52 SkyScan query 09:05:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:05:53 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:05:53 Message to Master queued w/err=0: serial=111556 error=0 09:05:58 Received message from Master: op=Filter serial=111557 09:05:58 Color wheel filter change from 0 to 0 09:05:58 FLIGetFilterPos err=0 currentPosition=0 09:05:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:58 Filter is already there-color wheel unchanged 09:05:58 Received message from Master: op=Shutter serial=111558 09:05:58 Shutter LASER close 09:05:58 Received message from Camera: op=State serial=111560 09:05:58 GetSingleValue result=40 Value=cccccccc 09:05:58 SkyScan query 09:05:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:05:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:59 Parameters OK 09:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:59 Set A/D data flow result=40 09:05:59 Set A/D channel type result=40 09:05:59 Set A/D encoding result=40 09:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:59 Set channel filter=0.000000e+000 result=40 09:05:59 Config A/D Result=40 09:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:59 Get A/D filter: -9.255963e+061 result=40 09:05:59 Get A/D value=-858993460 result=40 09:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:59 Parameters OK 09:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:59 Set A/D data flow result=40 09:05:59 Set A/D channel type result=40 09:05:59 Set A/D encoding result=40 09:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:59 Set channel filter=0.000000e+000 result=40 09:05:59 Config A/D Result=40 09:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:59 Get A/D filter: -9.255963e+061 result=40 09:05:59 Get A/D value=-858993460 result=40 09:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:59 Aux= 09:05:59 Message to Camera, serial 111560 queued 09:06:35 Received message from Master: op=PointingHead serial=111573 09:06:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:06:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:06:36 Point started: ret=0 09:06:36 point_skyscan result=0 09:06:36 Check angles 09:06:36 SkyScan query 09:06:37 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.675<-13445 Statuses=0009 0009 09:06:37 Msec=0 True Az=152.925 Ze=-21.675 Az status=0009 Ze status=0009 09:06:37 Check angles 09:06:37 SkyScan query 09:06:38 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.66<-12044 Statuses=0009 0009 09:06:38 Msec=750 True Az=135.405 Ze=-0.66 Az status=0009 Ze status=0009 09:06:38 Check angles 09:06:38 SkyScan query 09:06:39 SkyScan query done: ret=0 az=117.93<-7862 ze=20.25<-10650 Statuses=0009 0009 09:06:39 Msec=1500 True Az=117.93 Ze=20.25 Az status=0009 Ze status=0009 09:06:39 Check angles 09:06:39 SkyScan query 09:06:39 SkyScan query done: ret=0 az=100.56<-6704 ze=41.25<-9250 Statuses=0009 0009 09:06:39 Msec=2250 True Az=100.56 Ze=41.25 Az status=0009 Ze status=0009 09:06:39 Check angles 09:06:39 SkyScan query 09:06:40 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 09:06:40 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 09:06:40 Check angles 09:06:40 SkyScan query 09:06:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:06:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:06:41 Message to Master queued w/err=0: serial=111573 error=0 09:06:46 Received message from Master: op=Filter serial=111574 09:06:46 Color wheel filter change from 0 to 0 09:06:46 FLIGetFilterPos err=0 currentPosition=0 09:06:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:46 Filter is already there-color wheel unchanged 09:06:46 Received message from Master: op=Shutter serial=111575 09:06:46 Shutter LASER close 09:06:46 Received message from Camera: op=State serial=111577 09:06:46 GetSingleValue result=40 Value=cccccccc 09:06:46 SkyScan query 09:06:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:06:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:47 Parameters OK 09:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:47 Set A/D data flow result=40 09:06:47 Set A/D channel type result=40 09:06:47 Set A/D encoding result=40 09:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:47 Set channel filter=0.000000e+000 result=40 09:06:47 Config A/D Result=40 09:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:47 Get A/D filter: -9.255963e+061 result=40 09:06:47 Get A/D value=-858993460 result=40 09:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:47 Parameters OK 09:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:47 Set A/D data flow result=40 09:06:47 Set A/D channel type result=40 09:06:47 Set A/D encoding result=40 09:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:47 Set channel filter=0.000000e+000 result=40 09:06:47 Config A/D Result=40 09:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:47 Get A/D filter: -9.255963e+061 result=40 09:06:47 Get A/D value=-858993460 result=40 09:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:47 Aux= 09:06:47 Message to Camera, serial 111577 queued 09:07:23 Received message from Master: op=PointingHead serial=111590 09:07:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:07:23 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:07:24 Point started: ret=0 09:07:24 point_skyscan result=0 09:07:25 Check angles 09:07:25 SkyScan query 09:07:25 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 09:07:25 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 09:07:25 Check angles 09:07:25 SkyScan query 09:07:26 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 09:07:26 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 09:07:26 Check angles 09:07:26 SkyScan query 09:07:27 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 09:07:27 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 09:07:27 Check angles 09:07:27 SkyScan query 09:07:27 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 09:07:27 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 09:07:28 Check angles 09:07:28 SkyScan query 09:07:28 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:07:28 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:07:28 Check angles 09:07:28 SkyScan query 09:07:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:07:29 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:07:29 Message to Master queued w/err=0: serial=111590 error=0 09:07:34 Received message from Master: op=Filter serial=111591 09:07:34 Color wheel filter change from 0 to 0 09:07:34 FLIGetFilterPos err=0 currentPosition=0 09:07:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:34 Filter is already there-color wheel unchanged 09:07:34 Received message from Master: op=Shutter serial=111592 09:07:34 Shutter LASER close 09:07:34 Received message from Camera: op=State serial=111594 09:07:34 GetSingleValue result=40 Value=cccccccc 09:07:34 SkyScan query 09:07:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:07:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:35 Parameters OK 09:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:35 Set A/D data flow result=40 09:07:35 Set A/D channel type result=40 09:07:35 Set A/D encoding result=40 09:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:35 Set channel filter=0.000000e+000 result=40 09:07:35 Config A/D Result=40 09:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:35 Get A/D filter: -9.255963e+061 result=40 09:07:35 Get A/D value=-858993460 result=40 09:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:35 Parameters OK 09:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:35 Set A/D data flow result=40 09:07:35 Set A/D channel type result=40 09:07:35 Set A/D encoding result=40 09:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:35 Set channel filter=0.000000e+000 result=40 09:07:35 Config A/D Result=40 09:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:35 Get A/D filter: -9.255963e+061 result=40 09:07:35 Get A/D value=-858993460 result=40 09:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:35 Aux= 09:07:35 Message to Camera, serial 111594 queued 09:08:12 Received message from Master: op=PointingHead serial=111607 09:08:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:08:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:08:12 Point started: ret=0 09:08:12 point_skyscan result=0 09:08:13 Check angles 09:08:13 SkyScan query 09:08:13 SkyScan query done: ret=0 az=152.67<-10178 ze=8.22<-11452 Statuses=0009 0009 09:08:13 Msec=0 True Az=152.67 Ze=8.22 Az status=0009 Ze status=0009 09:08:13 Check angles 09:08:13 SkyScan query 09:08:14 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.69<-12846 Statuses=0009 0009 09:08:14 Msec=750 True Az=135.165 Ze=-12.69 Az status=0009 Ze status=0009 09:08:14 Check angles 09:08:14 SkyScan query 09:08:15 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.66<-14244 Statuses=0009 0009 09:08:15 Msec=1500 True Az=117.57 Ze=-33.66 Az status=0009 Ze status=0009 09:08:15 Check angles 09:08:15 SkyScan query 09:08:15 SkyScan query done: ret=0 az=99.99<-6666 ze=-51.57<-15438 Statuses=0009 0009 09:08:15 Msec=2250 True Az=99.99 Ze=-51.57 Az status=0009 Ze status=0009 09:08:16 Check angles 09:08:16 SkyScan query 09:08:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 09:08:16 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 09:08:16 Check angles 09:08:16 SkyScan query 09:08:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:08:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:08:17 Message to Master queued w/err=0: serial=111607 error=0 09:08:22 Received message from Master: op=Filter serial=111608 09:08:22 Color wheel filter change from 0 to 0 09:08:22 FLIGetFilterPos err=0 currentPosition=0 09:08:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:22 Filter is already there-color wheel unchanged 09:08:22 Received message from Master: op=Shutter serial=111609 09:08:22 Shutter LASER close 09:08:22 Received message from Camera: op=State serial=111611 09:08:22 GetSingleValue result=40 Value=cccccccc 09:08:22 SkyScan query 09:08:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:08:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:23 Parameters OK 09:08:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:23 Set A/D data flow result=40 09:08:23 Set A/D channel type result=40 09:08:23 Set A/D encoding result=40 09:08:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:23 Set channel filter=0.000000e+000 result=40 09:08:23 Config A/D Result=40 09:08:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:23 Get A/D filter: -9.255963e+061 result=40 09:08:23 Get A/D value=-858993460 result=40 09:08:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:23 Parameters OK 09:08:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:23 Set A/D data flow result=40 09:08:23 Set A/D channel type result=40 09:08:23 Set A/D encoding result=40 09:08:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:23 Set channel filter=0.000000e+000 result=40 09:08:23 Config A/D Result=40 09:08:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:23 Get A/D filter: -9.255963e+061 result=40 09:08:23 Get A/D value=-858993460 result=40 09:08:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:23 Aux= 09:08:23 Message to Camera, serial 111611 queued 09:09:00 Received message from Master: op=PointingHead serial=111624 09:09:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:09:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:09:00 Point started: ret=0 09:09:00 point_skyscan result=0 09:09:01 Check angles 09:09:01 SkyScan query 09:09:01 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.765<-17451 Statuses=0009 0009 09:09:01 Msec=0 True Az=109.335 Ze=-81.765 Az status=0009 Ze status=0009 09:09:01 Check angles 09:09:01 SkyScan query 09:09:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.155<-18877 Statuses=0008 0009 09:09:02 Msec=750 True Az=112.995 Ze=-103.155 Az status=0008 Ze status=0009 09:09:02 Check angles 09:09:02 SkyScan query 09:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.11<-20274 Statuses=0008 0009 09:09:03 Msec=1500 True Az=112.995 Ze=-124.11 Az status=0008 Ze status=0009 09:09:03 Check angles 09:09:03 SkyScan query 09:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 09:09:04 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 09:09:04 Check angles 09:09:04 SkyScan query 09:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.44<-23096 Statuses=0008 0009 09:09:04 Msec=3000 True Az=112.995 Ze=-166.44 Az status=0008 Ze status=0009 09:09:05 Check angles 09:09:05 SkyScan query 09:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:09:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:09:05 Message to Master queued w/err=0: serial=111624 error=0 09:09:10 Received message from Master: op=Filter serial=111625 09:09:10 Color wheel filter change from 0 to 0 09:09:10 FLIGetFilterPos err=0 currentPosition=0 09:09:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:10 Filter is already there-color wheel unchanged 09:09:10 Received message from Master: op=Shutter serial=111626 09:09:10 Shutter LASER open 09:09:10 Received message from Camera: op=State serial=111628 09:09:10 GetSingleValue result=40 Value=cccccccc 09:09:10 SkyScan query 09:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:09:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:11 Parameters OK 09:09:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:11 Set A/D data flow result=40 09:09:11 Set A/D channel type result=40 09:09:11 Set A/D encoding result=40 09:09:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:11 Set channel filter=0.000000e+000 result=40 09:09:11 Config A/D Result=40 09:09:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:11 Get A/D filter: -9.255963e+061 result=40 09:09:11 Get A/D value=-858993460 result=40 09:09:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:11 Parameters OK 09:09:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:11 Set A/D data flow result=40 09:09:11 Set A/D channel type result=40 09:09:11 Set A/D encoding result=40 09:09:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:11 Set channel filter=0.000000e+000 result=40 09:09:11 Config A/D Result=40 09:09:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:11 Get A/D filter: -9.255963e+061 result=40 09:09:11 Get A/D value=-858993460 result=40 09:09:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:11 Aux= 09:09:11 Message to Camera, serial 111628 queued 09:09:19 Received message from Master: op=Shutter serial=111638 09:09:19 Shutter LASER close 09:09:20 Received message from Master: op=PointingHead serial=111642 09:09:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:09:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:09:20 Point started: ret=0 09:09:20 point_skyscan result=0 09:09:21 Check angles 09:09:21 SkyScan query 09:09:22 SkyScan query done: ret=0 az=90.015<-6001 ze=157.425<-1505 Statuses=0009 0009 09:09:22 Msec=0 True Az=90.015 Ze=157.425 Az status=0009 Ze status=0009 09:09:22 Check angles 09:09:22 SkyScan query 09:09:22 SkyScan query done: ret=0 az=72.555<-4837 ze=136.44<-2904 Statuses=0009 0009 09:09:22 Msec=750 True Az=72.555 Ze=136.44 Az status=0009 Ze status=0009 09:09:22 Check angles 09:09:22 SkyScan query 09:09:23 SkyScan query done: ret=0 az=55.095<-3673 ze=115.53<-4298 Statuses=0009 0009 09:09:23 Msec=1500 True Az=55.095 Ze=115.53 Az status=0009 Ze status=0009 09:09:23 Check angles 09:09:23 SkyScan query 09:09:24 SkyScan query done: ret=0 az=40.92<-2728 ze=94.095<-5727 Statuses=0009 0009 09:09:24 Msec=2250 True Az=40.92 Ze=94.095 Az status=0009 Ze status=0009 09:09:24 Check angles 09:09:24 SkyScan query 09:09:25 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 09:09:25 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 09:09:25 Check angles 09:09:25 SkyScan query 09:09:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 09:09:25 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 09:09:26 Check angles 09:09:26 SkyScan query 09:09:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:09:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:09:26 Message to Master queued w/err=0: serial=111642 error=0 09:09:31 Received message from Master: op=Filter serial=111643 09:09:31 Color wheel filter change from 0 to 0 09:09:31 FLIGetFilterPos err=0 currentPosition=0 09:09:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:31 Filter is already there-color wheel unchanged 09:09:31 Received message from Master: op=Shutter serial=111644 09:09:31 Shutter LASER close 09:09:31 Received message from Camera: op=State serial=111646 09:09:31 GetSingleValue result=40 Value=cccccccc 09:09:31 SkyScan query 09:09:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:09:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:32 Parameters OK 09:09:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:32 Set A/D data flow result=40 09:09:32 Set A/D channel type result=40 09:09:32 Set A/D encoding result=40 09:09:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:32 Set channel filter=0.000000e+000 result=40 09:09:32 Config A/D Result=40 09:09:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:32 Get A/D filter: -9.255963e+061 result=40 09:09:32 Get A/D value=-858993460 result=40 09:09:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:32 Parameters OK 09:09:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:32 Set A/D data flow result=40 09:09:32 Set A/D channel type result=40 09:09:32 Set A/D encoding result=40 09:09:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:32 Set channel filter=0.000000e+000 result=40 09:09:32 Config A/D Result=40 09:09:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:32 Get A/D filter: -9.255963e+061 result=40 09:09:32 Get A/D value=-858993460 result=40 09:09:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:32 Aux= 09:09:32 Message to Camera, serial 111646 queued 09:10:09 Received message from Master: op=PointingHead serial=111659 09:10:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:10:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:10:09 Point started: ret=0 09:10:09 point_skyscan result=0 09:10:10 Check angles 09:10:10 SkyScan query 09:10:11 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 09:10:11 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 09:10:11 Check angles 09:10:11 SkyScan query 09:10:11 SkyScan query done: ret=0 az=81.345<-5423 ze=66.51<-7566 Statuses=0009 0008 09:10:11 Msec=750 True Az=81.345 Ze=66.51 Az status=0009 Ze status=0008 09:10:11 Check angles 09:10:11 SkyScan query 09:10:12 SkyScan query done: ret=0 az=98.865<-6591 ze=66.495<-7567 Statuses=0009 0008 09:10:12 Msec=1500 True Az=98.865 Ze=66.495 Az status=0009 Ze status=0008 09:10:12 Check angles 09:10:12 SkyScan query 09:10:13 SkyScan query done: ret=0 az=116.4<-7760 ze=66.495<-7567 Statuses=0009 0008 09:10:13 Msec=2250 True Az=116.4 Ze=66.495 Az status=0009 Ze status=0008 09:10:13 Check angles 09:10:13 SkyScan query 09:10:14 SkyScan query done: ret=0 az=133.92<-8928 ze=66.495<-7567 Statuses=0009 0008 09:10:14 Msec=3000 True Az=133.92 Ze=66.495 Az status=0009 Ze status=0008 09:10:14 Check angles 09:10:14 SkyScan query 09:10:14 SkyScan query done: ret=0 az=151.29<-10086 ze=66.495<-7567 Statuses=0009 0008 09:10:14 Msec=3750 True Az=151.29 Ze=66.495 Az status=0009 Ze status=0008 09:10:14 Check angles 09:10:14 SkyScan query 09:10:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:10:15 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 09:10:15 Message to Master queued w/err=0: serial=111659 error=0 09:10:20 Received message from Master: op=Filter serial=111660 09:10:20 Color wheel filter change from 0 to 0 09:10:20 FLIGetFilterPos err=0 currentPosition=0 09:10:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:20 Filter is already there-color wheel unchanged 09:10:20 Received message from Master: op=Shutter serial=111661 09:10:20 Shutter LASER close 09:10:20 Received message from Camera: op=State serial=111663 09:10:20 GetSingleValue result=40 Value=cccccccc 09:10:20 SkyScan query 09:10:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:10:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:21 Parameters OK 09:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:21 Set A/D data flow result=40 09:10:21 Set A/D channel type result=40 09:10:21 Set A/D encoding result=40 09:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:21 Set channel filter=0.000000e+000 result=40 09:10:21 Config A/D Result=40 09:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:21 Get A/D filter: -9.255963e+061 result=40 09:10:21 Get A/D value=-858993460 result=40 09:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:21 Parameters OK 09:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:21 Set A/D data flow result=40 09:10:21 Set A/D channel type result=40 09:10:21 Set A/D encoding result=40 09:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:21 Set channel filter=0.000000e+000 result=40 09:10:21 Config A/D Result=40 09:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:21 Get A/D filter: -9.255963e+061 result=40 09:10:21 Get A/D value=-858993460 result=40 09:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:21 Aux= 09:10:21 Message to Camera, serial 111663 queued 09:10:57 Received message from Master: op=PointingHead serial=111675 09:10:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:10:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:10:57 Point started: ret=0 09:10:57 point_skyscan result=0 09:10:58 Check angles 09:10:58 SkyScan query 09:10:58 SkyScan query done: ret=0 az=135.015<-9001 ze=36.675<-9555 Statuses=0009 0009 09:10:58 Msec=0 True Az=135.015 Ze=36.675 Az status=0009 Ze status=0009 09:10:59 Check angles 09:10:59 SkyScan query 09:10:59 SkyScan query done: ret=0 az=117.555<-7837 ze=15.75<-10950 Statuses=0009 0009 09:10:59 Msec=750 True Az=117.555 Ze=15.75 Az status=0009 Ze status=0009 09:10:59 Check angles 09:10:59 SkyScan query 09:11:00 SkyScan query done: ret=0 az=100.17<-6678 ze=-5.235<-12349 Statuses=0009 0009 09:11:00 Msec=1500 True Az=100.17 Ze=-5.235 Az status=0009 Ze status=0009 09:11:00 Check angles 09:11:00 SkyScan query 09:11:01 SkyScan query done: ret=0 az=82.635<-5509 ze=-26.175<-13745 Statuses=0009 0009 09:11:01 Msec=2250 True Az=82.635 Ze=-26.175 Az status=0009 Ze status=0009 09:11:01 Check angles 09:11:01 SkyScan query 09:11:01 SkyScan query done: ret=0 az=65.175<-4345 ze=-38.565<-14571 Statuses=0009 0008 09:11:01 Msec=3000 True Az=65.175 Ze=-38.565 Az status=0009 Ze status=0008 09:11:02 Check angles 09:11:02 SkyScan query 09:11:02 SkyScan query done: ret=0 az=47.655<-3177 ze=-38.535<-14569 Statuses=0009 0008 09:11:02 Msec=3750 True Az=47.655 Ze=-38.535 Az status=0009 Ze status=0008 09:11:02 Check angles 09:11:02 SkyScan query 09:11:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:11:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:11:03 Message to Master queued w/err=0: serial=111675 error=0 09:11:08 Received message from Master: op=Filter serial=111676 09:11:08 Color wheel filter change from 0 to 0 09:11:08 FLIGetFilterPos err=0 currentPosition=0 09:11:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:08 Filter is already there-color wheel unchanged 09:11:08 Received message from Master: op=Shutter serial=111677 09:11:08 Shutter LASER close 09:11:08 Received message from Camera: op=State serial=111679 09:11:08 GetSingleValue result=40 Value=cccccccc 09:11:08 SkyScan query 09:11:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:11:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:09 Parameters OK 09:11:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:09 Set A/D data flow result=40 09:11:09 Set A/D channel type result=40 09:11:09 Set A/D encoding result=40 09:11:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:09 Set channel filter=0.000000e+000 result=40 09:11:09 Config A/D Result=40 09:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:09 Get A/D filter: -9.255963e+061 result=40 09:11:09 Get A/D value=-858993460 result=40 09:11:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:09 Parameters OK 09:11:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:09 Set A/D data flow result=40 09:11:09 Set A/D channel type result=40 09:11:09 Set A/D encoding result=40 09:11:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:09 Set channel filter=0.000000e+000 result=40 09:11:09 Config A/D Result=40 09:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:09 Get A/D filter: -9.255963e+061 result=40 09:11:09 Get A/D value=-858993460 result=40 09:11:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:09 Aux= 09:11:09 Message to Camera, serial 111679 queued 09:11:45 Received message from Master: op=PointingHead serial=111692 09:11:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:11:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:11:46 Point started: ret=0 09:11:46 point_skyscan result=0 09:11:47 Check angles 09:11:47 SkyScan query 09:11:47 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.085<-16539 Statuses=0009 0009 09:11:47 Msec=0 True Az=63.825 Ze=-68.085 Az status=0009 Ze status=0009 09:11:47 Check angles 09:11:47 SkyScan query 09:11:48 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.535<-17969 Statuses=0009 0009 09:11:48 Msec=750 True Az=81.63 Ze=-89.535 Az status=0009 Ze status=0009 09:11:48 Check angles 09:11:48 SkyScan query 09:11:49 SkyScan query done: ret=0 az=99.075<-6605 ze=-110.49<-19366 Statuses=0009 0009 09:11:49 Msec=1500 True Az=99.075 Ze=-110.49 Az status=0009 Ze status=0009 09:11:49 Check angles 09:11:49 SkyScan query 09:11:49 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.415<-20761 Statuses=0009 0009 09:11:49 Msec=2250 True Az=116.625 Ze=-131.415 Az status=0009 Ze status=0009 09:11:50 Check angles 09:11:50 SkyScan query 09:11:50 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 09:11:50 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 09:11:50 Check angles 09:11:50 SkyScan query 09:11:51 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 09:11:51 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 09:11:51 Message to Master queued w/err=0: serial=111692 error=0 09:11:56 Received message from Master: op=Filter serial=111693 09:11:56 Color wheel filter change from 0 to 0 09:11:56 FLIGetFilterPos err=0 currentPosition=0 09:11:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:56 Filter is already there-color wheel unchanged 09:11:56 Received message from Master: op=Shutter serial=111694 09:11:56 Shutter LASER close 09:11:56 Received message from Camera: op=State serial=111696 09:11:56 GetSingleValue result=40 Value=cccccccc 09:11:56 SkyScan query 09:11:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:11:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:57 Parameters OK 09:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:57 Set A/D data flow result=40 09:11:57 Set A/D channel type result=40 09:11:57 Set A/D encoding result=40 09:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:57 Set channel filter=0.000000e+000 result=40 09:11:57 Config A/D Result=40 09:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:57 Get A/D filter: -9.255963e+061 result=40 09:11:57 Get A/D value=-858993460 result=40 09:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:57 Parameters OK 09:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:57 Set A/D data flow result=40 09:11:57 Set A/D channel type result=40 09:11:57 Set A/D encoding result=40 09:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:57 Set channel filter=0.000000e+000 result=40 09:11:57 Config A/D Result=40 09:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:57 Get A/D filter: -9.255963e+061 result=40 09:11:57 Get A/D value=-858993460 result=40 09:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:57 Aux= 09:11:57 Message to Camera, serial 111696 queued 09:12:34 Received message from Master: op=PointingHead serial=111709 09:12:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:12:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:12:34 Point started: ret=0 09:12:34 point_skyscan result=0 09:12:35 Check angles 09:12:35 SkyScan query 09:12:35 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 09:12:35 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 09:12:35 Check angles 09:12:35 SkyScan query 09:12:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:12:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:12:36 Message to Master queued w/err=0: serial=111709 error=0 09:12:41 Received message from Master: op=Filter serial=111710 09:12:41 Color wheel filter change from 0 to 0 09:12:41 FLIGetFilterPos err=0 currentPosition=0 09:12:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:41 Filter is already there-color wheel unchanged 09:12:41 Received message from Master: op=Shutter serial=111711 09:12:41 Shutter LASER open 09:12:41 Received message from Camera: op=State serial=111713 09:12:41 GetSingleValue result=40 Value=cccccccc 09:12:41 SkyScan query 09:12:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:12:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:42 Parameters OK 09:12:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:42 Set A/D data flow result=40 09:12:42 Set A/D channel type result=40 09:12:42 Set A/D encoding result=40 09:12:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:42 Set channel filter=0.000000e+000 result=40 09:12:42 Config A/D Result=40 09:12:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:42 Get A/D filter: -9.255963e+061 result=40 09:12:42 Get A/D value=-858993460 result=40 09:12:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:42 Parameters OK 09:12:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:42 Set A/D data flow result=40 09:12:42 Set A/D channel type result=40 09:12:42 Set A/D encoding result=40 09:12:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:42 Set channel filter=0.000000e+000 result=40 09:12:42 Config A/D Result=40 09:12:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:42 Get A/D filter: -9.255963e+061 result=40 09:12:42 Get A/D value=-858993460 result=40 09:12:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:42 Aux= 09:12:42 Message to Camera, serial 111713 queued 09:12:50 Received message from Master: op=Shutter serial=111723 09:12:50 Shutter LASER close 09:12:51 Received message from Master: op=PointingHead serial=111727 09:12:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:12:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:12:51 Point started: ret=0 09:12:51 point_skyscan result=0 09:12:52 Check angles 09:12:52 SkyScan query 09:12:53 SkyScan query done: ret=0 az=136.23<-9082 ze=-143.025<-21535 Statuses=0009 0009 09:12:53 Msec=0 True Az=136.23 Ze=-143.025 Az status=0009 Ze status=0009 09:12:53 Check angles 09:12:53 SkyScan query 09:12:53 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.98<-20132 Statuses=0009 0009 09:12:53 Msec=750 True Az=153.81 Ze=-121.98 Az status=0009 Ze status=0009 09:12:54 Check angles 09:12:54 SkyScan query 09:12:54 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.13<-18742 Statuses=0009 0009 09:12:54 Msec=1500 True Az=171.21 Ze=-101.13 Az status=0009 Ze status=0009 09:12:54 Check angles 09:12:54 SkyScan query 09:12:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 09:12:55 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 09:12:55 Check angles 09:12:55 SkyScan query 09:12:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.74<-15916 Statuses=0008 0009 09:12:56 Msec=3000 True Az=176.01 Ze=-58.74 Az status=0008 Ze status=0009 09:12:56 Check angles 09:12:56 SkyScan query 09:12:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:12:56 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:12:56 Message to Master queued w/err=0: serial=111727 error=0 09:13:01 Received message from Master: op=Filter serial=111728 09:13:01 Color wheel filter change from 0 to 0 09:13:01 FLIGetFilterPos err=0 currentPosition=0 09:13:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:01 Filter is already there-color wheel unchanged 09:13:02 Received message from Master: op=Shutter serial=111729 09:13:02 Shutter LASER close 09:13:02 Received message from Camera: op=State serial=111731 09:13:02 GetSingleValue result=40 Value=cccccccc 09:13:02 SkyScan query 09:13:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:13:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:02 Parameters OK 09:13:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:02 Set A/D data flow result=40 09:13:02 Set A/D channel type result=40 09:13:02 Set A/D encoding result=40 09:13:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:02 Set channel filter=0.000000e+000 result=40 09:13:02 Config A/D Result=40 09:13:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:02 Get A/D filter: -9.255963e+061 result=40 09:13:02 Get A/D value=-858993460 result=40 09:13:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:02 Parameters OK 09:13:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:02 Set A/D data flow result=40 09:13:02 Set A/D channel type result=40 09:13:02 Set A/D encoding result=40 09:13:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:02 Set channel filter=0.000000e+000 result=40 09:13:02 Config A/D Result=40 09:13:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:02 Get A/D filter: -9.255963e+061 result=40 09:13:02 Get A/D value=-858993460 result=40 09:13:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:02 Aux= 09:13:02 Message to Camera, serial 111731 queued 09:13:39 Received message from Master: op=PointingHead serial=111744 09:13:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:13:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:13:39 Point started: ret=0 09:13:39 point_skyscan result=0 09:13:40 Check angles 09:13:40 SkyScan query 09:13:41 SkyScan query done: ret=0 az=152.61<-10174 ze=-21.165<-13411 Statuses=0009 0009 09:13:41 Msec=0 True Az=152.61 Ze=-21.165 Az status=0009 Ze status=0009 09:13:41 Check angles 09:13:41 SkyScan query 09:13:42 SkyScan query done: ret=0 az=135.06<-9004 ze=-0.225<-12015 Statuses=0009 0009 09:13:42 Msec=750 True Az=135.06 Ze=-0.225 Az status=0009 Ze status=0009 09:13:42 Check angles 09:13:42 SkyScan query 09:13:42 SkyScan query done: ret=0 az=117.6<-7840 ze=20.7<-10620 Statuses=0009 0009 09:13:42 Msec=1500 True Az=117.6 Ze=20.7 Az status=0009 Ze status=0009 09:13:43 Check angles 09:13:43 SkyScan query 09:13:43 SkyScan query done: ret=0 az=99.75<-6650 ze=42.105<-9193 Statuses=0009 0009 09:13:43 Msec=2250 True Az=99.75 Ze=42.105 Az status=0009 Ze status=0009 09:13:43 Check angles 09:13:43 SkyScan query 09:13:44 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 09:13:44 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 09:13:44 Check angles 09:13:44 SkyScan query 09:13:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:13:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:13:45 Message to Master queued w/err=0: serial=111744 error=0 09:13:50 Received message from Master: op=Filter serial=111745 09:13:50 Color wheel filter change from 0 to 0 09:13:50 FLIGetFilterPos err=0 currentPosition=0 09:13:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:50 Filter is already there-color wheel unchanged 09:13:50 Received message from Master: op=Shutter serial=111746 09:13:50 Shutter LASER close 09:13:50 Received message from Camera: op=State serial=111748 09:13:50 GetSingleValue result=40 Value=cccccccc 09:13:50 SkyScan query 09:13:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:13:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:50 Parameters OK 09:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:50 Set A/D data flow result=40 09:13:50 Set A/D channel type result=40 09:13:50 Set A/D encoding result=40 09:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:50 Set channel filter=0.000000e+000 result=40 09:13:50 Config A/D Result=40 09:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:50 Get A/D filter: -9.255963e+061 result=40 09:13:50 Get A/D value=-858993460 result=40 09:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:50 Parameters OK 09:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:50 Set A/D data flow result=40 09:13:50 Set A/D channel type result=40 09:13:50 Set A/D encoding result=40 09:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:50 Set channel filter=0.000000e+000 result=40 09:13:50 Config A/D Result=40 09:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:50 Get A/D filter: -9.255963e+061 result=40 09:13:50 Get A/D value=-858993460 result=40 09:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:50 Aux= 09:13:50 Message to Camera, serial 111748 queued 09:14:27 Received message from Master: op=PointingHead serial=111761 09:14:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:14:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:14:28 Point started: ret=0 09:14:28 point_skyscan result=0 09:14:28 Check angles 09:14:28 SkyScan query 09:14:29 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 09:14:29 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 09:14:29 Check angles 09:14:29 SkyScan query 09:14:30 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 09:14:30 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 09:14:30 Check angles 09:14:30 SkyScan query 09:14:30 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 09:14:30 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 09:14:31 Check angles 09:14:31 SkyScan query 09:14:31 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 09:14:31 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 09:14:31 Check angles 09:14:31 SkyScan query 09:14:32 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:14:32 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:14:32 Check angles 09:14:32 SkyScan query 09:14:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:14:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:14:33 Message to Master queued w/err=0: serial=111761 error=0 09:14:38 Received message from Master: op=Filter serial=111762 09:14:38 Color wheel filter change from 0 to 0 09:14:38 FLIGetFilterPos err=0 currentPosition=0 09:14:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:38 Filter is already there-color wheel unchanged 09:14:38 Received message from Master: op=Shutter serial=111763 09:14:38 Shutter LASER close 09:14:38 Received message from Camera: op=State serial=111765 09:14:38 GetSingleValue result=40 Value=cccccccc 09:14:38 SkyScan query 09:14:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:14:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:39 Parameters OK 09:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:39 Set A/D data flow result=40 09:14:39 Set A/D channel type result=40 09:14:39 Set A/D encoding result=40 09:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:39 Set channel filter=0.000000e+000 result=40 09:14:39 Config A/D Result=40 09:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:39 Get A/D filter: -9.255963e+061 result=40 09:14:39 Get A/D value=-858993460 result=40 09:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:39 Parameters OK 09:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:39 Set A/D data flow result=40 09:14:39 Set A/D channel type result=40 09:14:39 Set A/D encoding result=40 09:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:39 Set channel filter=0.000000e+000 result=40 09:14:39 Config A/D Result=40 09:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:39 Get A/D filter: -9.255963e+061 result=40 09:14:39 Get A/D value=-858993460 result=40 09:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:39 Aux= 09:14:39 Message to Camera, serial 111765 queued 09:15:15 Received message from Master: op=PointingHead serial=111778 09:15:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:15:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:15:16 Point started: ret=0 09:15:16 point_skyscan result=0 09:15:17 Check angles 09:15:17 SkyScan query 09:15:17 SkyScan query done: ret=0 az=152.595<-10173 ze=8.175<-11455 Statuses=0009 0009 09:15:17 Msec=0 True Az=152.595 Ze=8.175 Az status=0009 Ze status=0009 09:15:17 Check angles 09:15:17 SkyScan query 09:15:18 SkyScan query done: ret=0 az=134.625<-8975 ze=-13.2<-12880 Statuses=0009 0009 09:15:18 Msec=750 True Az=134.625 Ze=-13.2 Az status=0009 Ze status=0009 09:15:18 Check angles 09:15:18 SkyScan query 09:15:19 SkyScan query done: ret=0 az=117.12<-7808 ze=-34.185<-14279 Statuses=0009 0009 09:15:19 Msec=1500 True Az=117.12 Ze=-34.185 Az status=0009 Ze status=0009 09:15:19 Check angles 09:15:19 SkyScan query 09:15:19 SkyScan query done: ret=0 az=99.825<-6655 ze=-51.57<-15438 Statuses=0009 0009 09:15:19 Msec=2250 True Az=99.825 Ze=-51.57 Az status=0009 Ze status=0009 09:15:20 Check angles 09:15:20 SkyScan query 09:15:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 09:15:20 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 09:15:20 Check angles 09:15:20 SkyScan query 09:15:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:15:21 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:15:21 Message to Master queued w/err=0: serial=111778 error=0 09:15:26 Received message from Master: op=Filter serial=111779 09:15:26 Color wheel filter change from 0 to 0 09:15:26 FLIGetFilterPos err=0 currentPosition=0 09:15:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:26 Filter is already there-color wheel unchanged 09:15:26 Received message from Master: op=Shutter serial=111780 09:15:26 Shutter LASER close 09:15:26 Received message from Camera: op=State serial=111782 09:15:26 GetSingleValue result=40 Value=cccccccc 09:15:26 SkyScan query 09:15:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:15:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:27 Parameters OK 09:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:27 Set A/D data flow result=40 09:15:27 Set A/D channel type result=40 09:15:27 Set A/D encoding result=40 09:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:27 Set channel filter=0.000000e+000 result=40 09:15:27 Config A/D Result=40 09:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:27 Get A/D filter: -9.255963e+061 result=40 09:15:27 Get A/D value=-858993460 result=40 09:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:27 Parameters OK 09:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:27 Set A/D data flow result=40 09:15:27 Set A/D channel type result=40 09:15:27 Set A/D encoding result=40 09:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:27 Set channel filter=0.000000e+000 result=40 09:15:27 Config A/D Result=40 09:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:27 Get A/D filter: -9.255963e+061 result=40 09:15:27 Get A/D value=-858993460 result=40 09:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:27 Aux= 09:15:27 Message to Camera, serial 111782 queued 09:15:27 Received message from Master: op=Identify serial=111783 [UTC 2018-12-13 09:15:52] 09:16:04 Received message from Master: op=PointingHead serial=111798 09:16:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:16:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:16:04 Point started: ret=0 09:16:04 point_skyscan result=0 09:16:05 Check angles 09:16:05 SkyScan query 09:16:05 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.315<-17421 Statuses=0009 0009 09:16:05 Msec=0 True Az=109.05 Ze=-81.315 Az status=0009 Ze status=0009 09:16:05 Check angles 09:16:05 SkyScan query 09:16:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 09:16:06 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 09:16:06 Check angles 09:16:06 SkyScan query 09:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 09:16:07 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 09:16:07 Check angles 09:16:07 SkyScan query 09:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.165<-21611 Statuses=0008 0009 09:16:07 Msec=2250 True Az=112.995 Ze=-144.165 Az status=0008 Ze status=0009 09:16:08 Check angles 09:16:08 SkyScan query 09:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.12<-23008 Statuses=0008 0009 09:16:08 Msec=3000 True Az=112.995 Ze=-165.12 Az status=0008 Ze status=0009 09:16:08 Check angles 09:16:08 SkyScan query 09:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:16:09 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:16:09 Message to Master queued w/err=0: serial=111798 error=0 09:16:14 Received message from Master: op=Filter serial=111799 09:16:14 Color wheel filter change from 0 to 0 09:16:14 FLIGetFilterPos err=0 currentPosition=0 09:16:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:14 Filter is already there-color wheel unchanged 09:16:14 Received message from Master: op=Shutter serial=111800 09:16:14 Shutter LASER open 09:16:14 Received message from Camera: op=State serial=111802 09:16:14 GetSingleValue result=40 Value=cccccccc 09:16:14 SkyScan query 09:16:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:16:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:15 Parameters OK 09:16:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:15 Set A/D data flow result=40 09:16:15 Set A/D channel type result=40 09:16:15 Set A/D encoding result=40 09:16:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:15 Set channel filter=0.000000e+000 result=40 09:16:15 Config A/D Result=40 09:16:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:15 Get A/D filter: -9.255963e+061 result=40 09:16:15 Get A/D value=-858993460 result=40 09:16:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:15 Parameters OK 09:16:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:15 Set A/D data flow result=40 09:16:15 Set A/D channel type result=40 09:16:15 Set A/D encoding result=40 09:16:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:15 Set channel filter=0.000000e+000 result=40 09:16:15 Config A/D Result=40 09:16:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:15 Get A/D filter: -9.255963e+061 result=40 09:16:15 Get A/D value=-858993460 result=40 09:16:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:15 Aux= 09:16:15 Message to Camera, serial 111802 queued 09:16:23 Received message from Master: op=Shutter serial=111812 09:16:23 Shutter LASER close 09:16:24 Received message from Master: op=PointingHead serial=111816 09:16:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:16:24 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:16:24 Point started: ret=0 09:16:24 point_skyscan result=0 09:16:25 Check angles 09:16:25 SkyScan query 09:16:25 SkyScan query done: ret=0 az=90.15<-6010 ze=157.485<-1501 Statuses=0009 0009 09:16:25 Msec=0 True Az=90.15 Ze=157.485 Az status=0009 Ze status=0009 09:16:26 Check angles 09:16:26 SkyScan query 09:16:26 SkyScan query done: ret=0 az=72.675<-4845 ze=136.5<-2900 Statuses=0009 0009 09:16:26 Msec=750 True Az=72.675 Ze=136.5 Az status=0009 Ze status=0009 09:16:26 Check angles 09:16:26 SkyScan query 09:16:27 SkyScan query done: ret=0 az=55.17<-3678 ze=115.575<-4295 Statuses=0009 0009 09:16:27 Msec=1500 True Az=55.17 Ze=115.575 Az status=0009 Ze status=0009 09:16:27 Check angles 09:16:27 SkyScan query 09:16:28 SkyScan query done: ret=0 az=40.92<-2728 ze=94.605<-5693 Statuses=0009 0009 09:16:28 Msec=2250 True Az=40.92 Ze=94.605 Az status=0009 Ze status=0009 09:16:28 Check angles 09:16:28 SkyScan query 09:16:28 SkyScan query done: ret=0 az=40.995<-2733 ze=73.665<-7089 Statuses=0008 0009 09:16:28 Msec=3000 True Az=40.995 Ze=73.665 Az status=0008 Ze status=0009 09:16:29 Check angles 09:16:29 SkyScan query 09:16:29 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 09:16:29 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 09:16:29 Check angles 09:16:29 SkyScan query 09:16:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:16:30 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:16:30 Message to Master queued w/err=0: serial=111816 error=0 09:16:35 Received message from Master: op=Filter serial=111817 09:16:35 Color wheel filter change from 0 to 0 09:16:35 FLIGetFilterPos err=0 currentPosition=0 09:16:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:35 Filter is already there-color wheel unchanged 09:16:35 Received message from Master: op=Shutter serial=111818 09:16:35 Shutter LASER close 09:16:35 Received message from Camera: op=State serial=111820 09:16:35 GetSingleValue result=40 Value=cccccccc 09:16:35 SkyScan query 09:16:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:16:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:36 Parameters OK 09:16:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:36 Set A/D data flow result=40 09:16:36 Set A/D channel type result=40 09:16:36 Set A/D encoding result=40 09:16:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:36 Set channel filter=0.000000e+000 result=40 09:16:36 Config A/D Result=40 09:16:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:36 Get A/D filter: -9.255963e+061 result=40 09:16:36 Get A/D value=-858993460 result=40 09:16:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:36 Parameters OK 09:16:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:36 Set A/D data flow result=40 09:16:36 Set A/D channel type result=40 09:16:36 Set A/D encoding result=40 09:16:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:36 Set channel filter=0.000000e+000 result=40 09:16:36 Config A/D Result=40 09:16:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:36 Get A/D filter: -9.255963e+061 result=40 09:16:36 Get A/D value=-858993460 result=40 09:16:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:36 Aux= 09:16:36 Message to Camera, serial 111820 queued 09:17:13 Received message from Master: op=PointingHead serial=111833 09:17:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:17:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:17:13 Point started: ret=0 09:17:13 point_skyscan result=0 09:17:14 Check angles 09:17:14 SkyScan query 09:17:14 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 09:17:14 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 09:17:15 Check angles 09:17:15 SkyScan query 09:17:15 SkyScan query done: ret=0 az=81.135<-5409 ze=66.495<-7567 Statuses=0009 0008 09:17:15 Msec=750 True Az=81.135 Ze=66.495 Az status=0009 Ze status=0008 09:17:15 Check angles 09:17:15 SkyScan query 09:17:16 SkyScan query done: ret=0 az=98.685<-6579 ze=66.495<-7567 Statuses=0009 0008 09:17:16 Msec=1500 True Az=98.685 Ze=66.495 Az status=0009 Ze status=0008 09:17:16 Check angles 09:17:16 SkyScan query 09:17:17 SkyScan query done: ret=0 az=116.205<-7747 ze=66.495<-7567 Statuses=0009 0008 09:17:17 Msec=2250 True Az=116.205 Ze=66.495 Az status=0009 Ze status=0008 09:17:17 Check angles 09:17:17 SkyScan query 09:17:17 SkyScan query done: ret=0 az=133.71<-8914 ze=66.495<-7567 Statuses=0009 0008 09:17:17 Msec=3000 True Az=133.71 Ze=66.495 Az status=0009 Ze status=0008 09:17:18 Check angles 09:17:18 SkyScan query 09:17:18 SkyScan query done: ret=0 az=151.065<-10071 ze=66.495<-7567 Statuses=0009 0008 09:17:18 Msec=3750 True Az=151.065 Ze=66.495 Az status=0009 Ze status=0008 09:17:18 Check angles 09:17:18 SkyScan query 09:17:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:17:19 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 09:17:19 Message to Master queued w/err=0: serial=111833 error=0 09:17:24 Received message from Master: op=Filter serial=111834 09:17:24 Color wheel filter change from 0 to 0 09:17:24 FLIGetFilterPos err=0 currentPosition=0 09:17:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:24 Filter is already there-color wheel unchanged 09:17:24 Received message from Master: op=Shutter serial=111835 09:17:24 Shutter LASER close 09:17:24 Received message from Camera: op=State serial=111837 09:17:24 GetSingleValue result=40 Value=cccccccc 09:17:24 SkyScan query 09:17:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:17:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:25 Parameters OK 09:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:25 Set A/D data flow result=40 09:17:25 Set A/D channel type result=40 09:17:25 Set A/D encoding result=40 09:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:25 Set channel filter=0.000000e+000 result=40 09:17:25 Config A/D Result=40 09:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:25 Get A/D filter: -9.255963e+061 result=40 09:17:25 Get A/D value=-858993460 result=40 09:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:25 Parameters OK 09:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:25 Set A/D data flow result=40 09:17:25 Set A/D channel type result=40 09:17:25 Set A/D encoding result=40 09:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:25 Set channel filter=0.000000e+000 result=40 09:17:25 Config A/D Result=40 09:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:25 Get A/D filter: -9.255963e+061 result=40 09:17:25 Get A/D value=-858993460 result=40 09:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:25 Aux= 09:17:25 Message to Camera, serial 111837 queued 09:18:01 Received message from Master: op=PointingHead serial=111850 09:18:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:18:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:18:02 Point started: ret=0 09:18:02 point_skyscan result=0 09:18:03 Check angles 09:18:03 SkyScan query 09:18:03 SkyScan query done: ret=0 az=134.865<-8991 ze=36.525<-9565 Statuses=0009 0009 09:18:03 Msec=0 True Az=134.865 Ze=36.525 Az status=0009 Ze status=0009 09:18:03 Check angles 09:18:03 SkyScan query 09:18:04 SkyScan query done: ret=0 az=117.36<-7824 ze=15.6<-10960 Statuses=0009 0009 09:18:04 Msec=750 True Az=117.36 Ze=15.6 Az status=0009 Ze status=0009 09:18:04 Check angles 09:18:04 SkyScan query 09:18:05 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.385<-12359 Statuses=0009 0009 09:18:05 Msec=1500 True Az=99.96 Ze=-5.385 Az status=0009 Ze status=0009 09:18:05 Check angles 09:18:05 SkyScan query 09:18:05 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.325<-13755 Statuses=0009 0009 09:18:05 Msec=2250 True Az=82.47 Ze=-26.325 Az status=0009 Ze status=0009 09:18:06 Check angles 09:18:06 SkyScan query 09:18:06 SkyScan query done: ret=0 az=64.935<-4329 ze=-38.565<-14571 Statuses=0009 0008 09:18:06 Msec=3000 True Az=64.935 Ze=-38.565 Az status=0009 Ze status=0008 09:18:06 Check angles 09:18:06 SkyScan query 09:18:07 SkyScan query done: ret=0 az=47.475<-3165 ze=-38.535<-14569 Statuses=0009 0008 09:18:07 Msec=3750 True Az=47.475 Ze=-38.535 Az status=0009 Ze status=0008 09:18:07 Check angles 09:18:07 SkyScan query 09:18:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:18:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:18:08 Message to Master queued w/err=0: serial=111850 error=0 09:18:13 Received message from Master: op=Filter serial=111851 09:18:13 Color wheel filter change from 0 to 0 09:18:13 FLIGetFilterPos err=0 currentPosition=0 09:18:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:13 Filter is already there-color wheel unchanged 09:18:13 Received message from Master: op=Shutter serial=111852 09:18:13 Shutter LASER close 09:18:13 Received message from Camera: op=State serial=111854 09:18:13 GetSingleValue result=40 Value=cccccccc 09:18:13 SkyScan query 09:18:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:18:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:13 Parameters OK 09:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:13 Set A/D data flow result=40 09:18:13 Set A/D channel type result=40 09:18:13 Set A/D encoding result=40 09:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:13 Set channel filter=0.000000e+000 result=40 09:18:13 Config A/D Result=40 09:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:13 Get A/D filter: -9.255963e+061 result=40 09:18:13 Get A/D value=-858993460 result=40 09:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:13 Parameters OK 09:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:13 Set A/D data flow result=40 09:18:13 Set A/D channel type result=40 09:18:13 Set A/D encoding result=40 09:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:13 Set channel filter=0.000000e+000 result=40 09:18:13 Config A/D Result=40 09:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:13 Get A/D filter: -9.255963e+061 result=40 09:18:13 Get A/D value=-858993460 result=40 09:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:13 Aux= 09:18:13 Message to Camera, serial 111854 queued 09:18:50 Received message from Master: op=PointingHead serial=111867 09:18:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:18:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:18:51 Point started: ret=0 09:18:51 point_skyscan result=0 09:18:51 Check angles 09:18:51 SkyScan query 09:18:52 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.235<-16549 Statuses=0009 0009 09:18:52 Msec=0 True Az=63.96 Ze=-68.235 Az status=0009 Ze status=0009 09:18:52 Check angles 09:18:52 SkyScan query 09:18:53 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.235<-17949 Statuses=0009 0009 09:18:53 Msec=750 True Az=81.375 Ze=-89.235 Az status=0009 Ze status=0009 09:18:53 Check angles 09:18:53 SkyScan query 09:18:54 SkyScan query done: ret=0 az=98.88<-6592 ze=-110.175<-19345 Statuses=0009 0009 09:18:54 Msec=1500 True Az=98.88 Ze=-110.175 Az status=0009 Ze status=0009 09:18:54 Check angles 09:18:54 SkyScan query 09:18:54 SkyScan query done: ret=0 az=116.385<-7759 ze=-131.13<-20742 Statuses=0009 0009 09:18:54 Msec=2250 True Az=116.385 Ze=-131.13 Az status=0009 Ze status=0009 09:18:54 Check angles 09:18:54 SkyScan query 09:18:55 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 09:18:55 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 09:18:55 Check angles 09:18:55 SkyScan query 09:18:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 09:18:56 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 09:18:56 Message to Master queued w/err=0: serial=111867 error=0 09:19:01 Received message from Master: op=Filter serial=111868 09:19:01 Color wheel filter change from 0 to 0 09:19:01 FLIGetFilterPos err=0 currentPosition=0 09:19:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:01 Filter is already there-color wheel unchanged 09:19:01 Received message from Master: op=Shutter serial=111869 09:19:01 Shutter LASER close 09:19:01 Received message from Camera: op=State serial=111871 09:19:01 GetSingleValue result=40 Value=cccccccc 09:19:01 SkyScan query 09:19:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:19:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:02 Parameters OK 09:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:02 Set A/D data flow result=40 09:19:02 Set A/D channel type result=40 09:19:02 Set A/D encoding result=40 09:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:02 Set channel filter=0.000000e+000 result=40 09:19:02 Config A/D Result=40 09:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:02 Get A/D filter: -9.255963e+061 result=40 09:19:02 Get A/D value=-858993460 result=40 09:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:02 Parameters OK 09:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:02 Set A/D data flow result=40 09:19:02 Set A/D channel type result=40 09:19:02 Set A/D encoding result=40 09:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:02 Set channel filter=0.000000e+000 result=40 09:19:02 Config A/D Result=40 09:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:02 Get A/D filter: -9.255963e+061 result=40 09:19:02 Get A/D value=-858993460 result=40 09:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:02 Aux= 09:19:02 Message to Camera, serial 111871 queued 09:19:38 Received message from Master: op=PointingHead serial=111884 09:19:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:19:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:19:39 Point started: ret=0 09:19:39 point_skyscan result=0 09:19:39 Check angles 09:19:39 SkyScan query 09:19:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.225<-23415 Statuses=0009 0009 09:19:40 Msec=0 True Az=112.995 Ze=-171.225 Az status=0009 Ze status=0009 09:19:40 Check angles 09:19:40 SkyScan query 09:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:19:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:19:41 Message to Master queued w/err=0: serial=111884 error=0 09:19:46 Received message from Master: op=Filter serial=111885 09:19:46 Color wheel filter change from 0 to 0 09:19:46 FLIGetFilterPos err=0 currentPosition=0 09:19:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:46 Filter is already there-color wheel unchanged 09:19:46 Received message from Master: op=Shutter serial=111886 09:19:46 Shutter LASER open 09:19:46 Received message from Camera: op=State serial=111888 09:19:46 GetSingleValue result=40 Value=cccccccc 09:19:46 SkyScan query 09:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:19:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:47 Parameters OK 09:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:47 Set A/D data flow result=40 09:19:47 Set A/D channel type result=40 09:19:47 Set A/D encoding result=40 09:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:47 Set channel filter=0.000000e+000 result=40 09:19:47 Config A/D Result=40 09:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:47 Get A/D filter: -9.255963e+061 result=40 09:19:47 Get A/D value=-858993460 result=40 09:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:47 Parameters OK 09:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:47 Set A/D data flow result=40 09:19:47 Set A/D channel type result=40 09:19:47 Set A/D encoding result=40 09:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:47 Set channel filter=0.000000e+000 result=40 09:19:47 Config A/D Result=40 09:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:47 Get A/D filter: -9.255963e+061 result=40 09:19:47 Get A/D value=-858993460 result=40 09:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:47 Aux= 09:19:47 Message to Camera, serial 111888 queued 09:19:55 Received message from Master: op=Shutter serial=111898 09:19:55 Shutter LASER close 09:19:56 Received message from Master: op=PointingHead serial=111902 09:19:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:19:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:19:56 Point started: ret=0 09:19:56 point_skyscan result=0 09:19:57 Check angles 09:19:57 SkyScan query 09:19:58 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.845<-21523 Statuses=0009 0009 09:19:58 Msec=0 True Az=136.23 Ze=-142.845 Az status=0009 Ze status=0009 09:19:58 Check angles 09:19:58 SkyScan query 09:19:58 SkyScan query done: ret=0 az=154.08<-10272 ze=-121.485<-20099 Statuses=0009 0009 09:19:58 Msec=750 True Az=154.08 Ze=-121.485 Az status=0009 Ze status=0009 09:19:58 Check angles 09:19:58 SkyScan query 09:19:59 SkyScan query done: ret=0 az=171.615<-11441 ze=-100.44<-18696 Statuses=0009 0009 09:19:59 Msec=1500 True Az=171.615 Ze=-100.44 Az status=0009 Ze status=0009 09:19:59 Check angles 09:19:59 SkyScan query 09:20:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.545<-17303 Statuses=0008 0009 09:20:00 Msec=2250 True Az=176.01 Ze=-79.545 Az status=0008 Ze status=0009 09:20:00 Check angles 09:20:00 SkyScan query 09:20:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.56<-15904 Statuses=0008 0009 09:20:01 Msec=3000 True Az=176.01 Ze=-58.56 Az status=0008 Ze status=0009 09:20:01 Check angles 09:20:01 SkyScan query 09:20:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 09:20:01 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 09:20:01 Message to Master queued w/err=0: serial=111902 error=0 09:20:06 Received message from Master: op=Filter serial=111903 09:20:06 Color wheel filter change from 0 to 0 09:20:06 FLIGetFilterPos err=0 currentPosition=0 09:20:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:06 Filter is already there-color wheel unchanged 09:20:06 Received message from Master: op=Shutter serial=111904 09:20:06 Shutter LASER close 09:20:07 Received message from Camera: op=State serial=111906 09:20:07 GetSingleValue result=40 Value=cccccccc 09:20:07 SkyScan query 09:20:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:07 Parameters OK 09:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:07 Set A/D data flow result=40 09:20:07 Set A/D channel type result=40 09:20:07 Set A/D encoding result=40 09:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:07 Set channel filter=0.000000e+000 result=40 09:20:07 Config A/D Result=40 09:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:07 Get A/D filter: -9.255963e+061 result=40 09:20:07 Get A/D value=-858993460 result=40 09:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:07 Parameters OK 09:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:07 Set A/D data flow result=40 09:20:07 Set A/D channel type result=40 09:20:07 Set A/D encoding result=40 09:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:07 Set channel filter=0.000000e+000 result=40 09:20:07 Config A/D Result=40 09:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:07 Get A/D filter: -9.255963e+061 result=40 09:20:07 Get A/D value=-858993460 result=40 09:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:07 Aux= 09:20:07 Message to Camera, serial 111906 queued 09:20:44 Received message from Master: op=PointingHead serial=111919 09:20:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:20:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:20:44 Point started: ret=0 09:20:44 point_skyscan result=0 09:20:45 Check angles 09:20:45 SkyScan query 09:20:46 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.36<-13424 Statuses=0009 0009 09:20:46 Msec=0 True Az=152.73 Ze=-21.36 Az status=0009 Ze status=0009 09:20:46 Check angles 09:20:46 SkyScan query 09:20:46 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.375<-12025 Statuses=0009 0009 09:20:46 Msec=750 True Az=135.165 Ze=-0.375 Az status=0009 Ze status=0009 09:20:47 Check angles 09:20:47 SkyScan query 09:20:47 SkyScan query done: ret=0 az=117.69<-7846 ze=20.565<-10629 Statuses=0009 0009 09:20:47 Msec=1500 True Az=117.69 Ze=20.565 Az status=0009 Ze status=0009 09:20:47 Check angles 09:20:47 SkyScan query 09:20:48 SkyScan query done: ret=0 az=100.305<-6687 ze=41.535<-9231 Statuses=0009 0009 09:20:48 Msec=2250 True Az=100.305 Ze=41.535 Az status=0009 Ze status=0009 09:20:48 Check angles 09:20:48 SkyScan query 09:20:49 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 09:20:49 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 09:20:49 Check angles 09:20:49 SkyScan query 09:20:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:20:49 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:20:49 Message to Master queued w/err=0: serial=111919 error=0 09:20:54 Received message from Master: op=Filter serial=111920 09:20:54 Color wheel filter change from 0 to 0 09:20:54 FLIGetFilterPos err=0 currentPosition=0 09:20:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:54 Filter is already there-color wheel unchanged 09:20:55 Received message from Master: op=Shutter serial=111921 09:20:55 Shutter LASER close 09:20:55 Received message from Camera: op=State serial=111923 09:20:55 GetSingleValue result=40 Value=cccccccc 09:20:55 SkyScan query 09:20:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:20:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:55 Parameters OK 09:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:55 Set A/D data flow result=40 09:20:55 Set A/D channel type result=40 09:20:55 Set A/D encoding result=40 09:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:55 Set channel filter=0.000000e+000 result=40 09:20:55 Config A/D Result=40 09:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:55 Get A/D filter: -9.255963e+061 result=40 09:20:55 Get A/D value=-858993460 result=40 09:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:55 Parameters OK 09:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:55 Set A/D data flow result=40 09:20:55 Set A/D channel type result=40 09:20:55 Set A/D encoding result=40 09:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:55 Set channel filter=0.000000e+000 result=40 09:20:55 Config A/D Result=40 09:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:55 Get A/D filter: -9.255963e+061 result=40 09:20:55 Get A/D value=-858993460 result=40 09:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:55 Aux= 09:20:55 Message to Camera, serial 111923 queued 09:21:32 Received message from Master: op=PointingHead serial=111936 09:21:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:21:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:21:32 Point started: ret=0 09:21:32 point_skyscan result=0 09:21:33 Check angles 09:21:33 SkyScan query 09:21:34 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 09:21:34 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 09:21:34 Check angles 09:21:34 SkyScan query 09:21:35 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 09:21:35 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 09:21:35 Check angles 09:21:35 SkyScan query 09:21:35 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 09:21:35 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 09:21:35 Check angles 09:21:35 SkyScan query 09:21:36 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 09:21:36 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 09:21:36 Check angles 09:21:36 SkyScan query 09:21:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:21:37 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:21:37 Check angles 09:21:37 SkyScan query 09:21:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:21:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:21:38 Message to Master queued w/err=0: serial=111936 error=0 09:21:43 Received message from Master: op=Filter serial=111937 09:21:43 Color wheel filter change from 0 to 0 09:21:43 FLIGetFilterPos err=0 currentPosition=0 09:21:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:43 Filter is already there-color wheel unchanged 09:21:43 Received message from Master: op=Shutter serial=111938 09:21:43 Shutter LASER close 09:21:43 Received message from Camera: op=State serial=111940 09:21:43 GetSingleValue result=40 Value=cccccccc 09:21:43 SkyScan query 09:21:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:43 Parameters OK 09:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:43 Set A/D data flow result=40 09:21:43 Set A/D channel type result=40 09:21:43 Set A/D encoding result=40 09:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:43 Set channel filter=0.000000e+000 result=40 09:21:43 Config A/D Result=40 09:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:43 Get A/D filter: -9.255963e+061 result=40 09:21:43 Get A/D value=-858993460 result=40 09:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:43 Parameters OK 09:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:43 Set A/D data flow result=40 09:21:43 Set A/D channel type result=40 09:21:43 Set A/D encoding result=40 09:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:43 Set channel filter=0.000000e+000 result=40 09:21:43 Config A/D Result=40 09:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:43 Get A/D filter: -9.255963e+061 result=40 09:21:43 Get A/D value=-858993460 result=40 09:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:43 Aux= 09:21:43 Message to Camera, serial 111940 queued 09:22:20 Received message from Master: op=PointingHead serial=111953 09:22:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:22:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:22:21 Point started: ret=0 09:22:21 point_skyscan result=0 09:22:21 Check angles 09:22:21 SkyScan query 09:22:22 SkyScan query done: ret=0 az=152.745<-10183 ze=8.31<-11446 Statuses=0009 0009 09:22:22 Msec=0 True Az=152.745 Ze=8.31 Az status=0009 Ze status=0009 09:22:22 Check angles 09:22:22 SkyScan query 09:22:23 SkyScan query done: ret=0 az=134.805<-8987 ze=-13.05<-12870 Statuses=0009 0009 09:22:23 Msec=750 True Az=134.805 Ze=-13.05 Az status=0009 Ze status=0009 09:22:23 Check angles 09:22:23 SkyScan query 09:22:23 SkyScan query done: ret=0 az=117.36<-7824 ze=-34.035<-14269 Statuses=0009 0009 09:22:23 Msec=1500 True Az=117.36 Ze=-34.035 Az status=0009 Ze status=0009 09:22:24 Check angles 09:22:24 SkyScan query 09:22:24 SkyScan query done: ret=0 az=99.45<-6630 ze=-51.555<-15437 Statuses=0009 0009 09:22:24 Msec=2250 True Az=99.45 Ze=-51.555 Az status=0009 Ze status=0009 09:22:24 Check angles 09:22:24 SkyScan query 09:22:25 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 09:22:25 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 09:22:25 Check angles 09:22:25 SkyScan query 09:22:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:22:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:22:26 Message to Master queued w/err=0: serial=111953 error=0 09:22:31 Received message from Master: op=Filter serial=111954 09:22:31 Color wheel filter change from 0 to 0 09:22:31 FLIGetFilterPos err=0 currentPosition=0 09:22:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:31 Filter is already there-color wheel unchanged 09:22:31 Received message from Master: op=Shutter serial=111955 09:22:31 Shutter LASER close 09:22:31 Received message from Camera: op=State serial=111957 09:22:31 GetSingleValue result=40 Value=cccccccc 09:22:31 SkyScan query 09:22:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:22:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:32 Parameters OK 09:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:32 Set A/D data flow result=40 09:22:32 Set A/D channel type result=40 09:22:32 Set A/D encoding result=40 09:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:32 Set channel filter=0.000000e+000 result=40 09:22:32 Config A/D Result=40 09:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:32 Get A/D filter: -9.255963e+061 result=40 09:22:32 Get A/D value=-858993460 result=40 09:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:32 Parameters OK 09:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:32 Set A/D data flow result=40 09:22:32 Set A/D channel type result=40 09:22:32 Set A/D encoding result=40 09:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:32 Set channel filter=0.000000e+000 result=40 09:22:32 Config A/D Result=40 09:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:32 Get A/D filter: -9.255963e+061 result=40 09:22:32 Get A/D value=-858993460 result=40 09:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:32 Aux= 09:22:32 Message to Camera, serial 111957 queued 09:23:08 Received message from Master: op=PointingHead serial=111970 09:23:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:23:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:23:09 Point started: ret=0 09:23:09 point_skyscan result=0 09:23:09 Check angles 09:23:09 SkyScan query 09:23:10 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.675<-17445 Statuses=0009 0009 09:23:10 Msec=0 True Az=109.335 Ze=-81.675 Az status=0009 Ze status=0009 09:23:10 Check angles 09:23:10 SkyScan query 09:23:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.095<-18873 Statuses=0008 0009 09:23:11 Msec=750 True Az=112.995 Ze=-103.095 Az status=0008 Ze status=0009 09:23:11 Check angles 09:23:11 SkyScan query 09:23:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 09:23:12 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 09:23:12 Check angles 09:23:12 SkyScan query 09:23:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.975<-21665 Statuses=0008 0009 09:23:12 Msec=2250 True Az=112.995 Ze=-144.975 Az status=0008 Ze status=0009 09:23:12 Check angles 09:23:12 SkyScan query 09:23:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 09:23:13 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 09:23:13 Check angles 09:23:13 SkyScan query 09:23:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:23:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:23:14 Message to Master queued w/err=0: serial=111970 error=0 09:23:19 Received message from Master: op=Filter serial=111971 09:23:19 Color wheel filter change from 0 to 0 09:23:19 FLIGetFilterPos err=0 currentPosition=0 09:23:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:19 Filter is already there-color wheel unchanged 09:23:19 Received message from Master: op=Shutter serial=111972 09:23:19 Shutter LASER open 09:23:19 Received message from Camera: op=State serial=111974 09:23:19 GetSingleValue result=40 Value=cccccccc 09:23:19 SkyScan query 09:23:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:23:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:20 Parameters OK 09:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:20 Set A/D data flow result=40 09:23:20 Set A/D channel type result=40 09:23:20 Set A/D encoding result=40 09:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:20 Set channel filter=0.000000e+000 result=40 09:23:20 Config A/D Result=40 09:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:20 Get A/D filter: -9.255963e+061 result=40 09:23:20 Get A/D value=-858993460 result=40 09:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:20 Parameters OK 09:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:20 Set A/D data flow result=40 09:23:20 Set A/D channel type result=40 09:23:20 Set A/D encoding result=40 09:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:20 Set channel filter=0.000000e+000 result=40 09:23:20 Config A/D Result=40 09:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:20 Get A/D filter: -9.255963e+061 result=40 09:23:20 Get A/D value=-858993460 result=40 09:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:20 Aux= 09:23:20 Message to Camera, serial 111974 queued 09:23:28 Received message from Master: op=Shutter serial=111984 09:23:28 Shutter LASER close 09:23:29 Received message from Master: op=PointingHead serial=111988 09:23:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:23:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:23:29 Point started: ret=0 09:23:29 point_skyscan result=0 09:23:30 Check angles 09:23:30 SkyScan query 09:23:30 SkyScan query done: ret=0 az=89.88<-5992 ze=157.2<-1520 Statuses=0009 0009 09:23:30 Msec=0 True Az=89.88 Ze=157.2 Az status=0009 Ze status=0009 09:23:30 Check angles 09:23:30 SkyScan query 09:23:31 SkyScan query done: ret=0 az=72<-4800 ze=135.81<-2946 Statuses=0009 0009 09:23:31 Msec=750 True Az=72 Ze=135.81 Az status=0009 Ze status=0009 09:23:31 Check angles 09:23:31 SkyScan query 09:23:32 SkyScan query done: ret=0 az=54.75<-3650 ze=114.84<-4344 Statuses=0009 0009 09:23:32 Msec=1500 True Az=54.75 Ze=114.84 Az status=0009 Ze status=0009 09:23:32 Check angles 09:23:32 SkyScan query 09:23:33 SkyScan query done: ret=0 az=40.89<-2726 ze=93.915<-5739 Statuses=0009 0009 09:23:33 Msec=2250 True Az=40.89 Ze=93.915 Az status=0009 Ze status=0009 09:23:33 Check angles 09:23:33 SkyScan query 09:23:33 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 09:23:33 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 09:23:33 Check angles 09:23:33 SkyScan query 09:23:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 09:23:34 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 09:23:34 Check angles 09:23:34 SkyScan query 09:23:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:23:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:23:35 Message to Master queued w/err=0: serial=111988 error=0 09:23:40 Received message from Master: op=Filter serial=111989 09:23:40 Color wheel filter change from 0 to 0 09:23:40 FLIGetFilterPos err=0 currentPosition=0 09:23:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:40 Filter is already there-color wheel unchanged 09:23:40 Received message from Master: op=Shutter serial=111990 09:23:40 Shutter LASER close 09:23:40 Received message from Camera: op=State serial=111992 09:23:40 GetSingleValue result=40 Value=cccccccc 09:23:40 SkyScan query 09:23:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:23:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:41 Parameters OK 09:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:41 Set A/D data flow result=40 09:23:41 Set A/D channel type result=40 09:23:41 Set A/D encoding result=40 09:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:41 Set channel filter=0.000000e+000 result=40 09:23:41 Config A/D Result=40 09:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:41 Get A/D filter: -9.255963e+061 result=40 09:23:41 Get A/D value=-858993460 result=40 09:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:41 Parameters OK 09:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:41 Set A/D data flow result=40 09:23:41 Set A/D channel type result=40 09:23:41 Set A/D encoding result=40 09:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:41 Set channel filter=0.000000e+000 result=40 09:23:41 Config A/D Result=40 09:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:41 Get A/D filter: -9.255963e+061 result=40 09:23:41 Get A/D value=-858993460 result=40 09:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:41 Aux= 09:23:41 Message to Camera, serial 111992 queued 09:24:18 Received message from Master: op=PointingHead serial=112005 09:24:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:24:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:24:18 Point started: ret=0 09:24:18 point_skyscan result=0 09:24:19 Check angles 09:24:19 SkyScan query 09:24:19 SkyScan query done: ret=0 az=63.78<-4252 ze=66.555<-7563 Statuses=0009 0008 09:24:19 Msec=0 True Az=63.78 Ze=66.555 Az status=0009 Ze status=0008 09:24:19 Check angles 09:24:19 SkyScan query 09:24:20 SkyScan query done: ret=0 az=81.165<-5411 ze=66.495<-7567 Statuses=0009 0008 09:24:20 Msec=750 True Az=81.165 Ze=66.495 Az status=0009 Ze status=0008 09:24:20 Check angles 09:24:20 SkyScan query 09:24:21 SkyScan query done: ret=0 az=98.61<-6574 ze=66.495<-7567 Statuses=0009 0008 09:24:21 Msec=1500 True Az=98.61 Ze=66.495 Az status=0009 Ze status=0008 09:24:21 Check angles 09:24:21 SkyScan query 09:24:21 SkyScan query done: ret=0 az=116.145<-7743 ze=66.495<-7567 Statuses=0009 0008 09:24:21 Msec=2250 True Az=116.145 Ze=66.495 Az status=0009 Ze status=0008 09:24:22 Check angles 09:24:22 SkyScan query 09:24:22 SkyScan query done: ret=0 az=133.74<-8916 ze=66.495<-7567 Statuses=0009 0008 09:24:22 Msec=3000 True Az=133.74 Ze=66.495 Az status=0009 Ze status=0008 09:24:22 Check angles 09:24:22 SkyScan query 09:24:23 SkyScan query done: ret=0 az=151.05<-10070 ze=66.495<-7567 Statuses=0009 0008 09:24:23 Msec=3750 True Az=151.05 Ze=66.495 Az status=0009 Ze status=0008 09:24:23 Check angles 09:24:23 SkyScan query 09:24:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:24:24 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 09:24:24 Message to Master queued w/err=0: serial=112005 error=0 09:24:29 Received message from Master: op=Filter serial=112006 09:24:29 Color wheel filter change from 0 to 0 09:24:29 FLIGetFilterPos err=0 currentPosition=0 09:24:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:29 Filter is already there-color wheel unchanged 09:24:29 Received message from Master: op=Shutter serial=112007 09:24:29 Shutter LASER close 09:24:29 Received message from Camera: op=State serial=112009 09:24:29 GetSingleValue result=40 Value=cccccccc 09:24:29 SkyScan query 09:24:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:24:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:30 Parameters OK 09:24:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:30 Set A/D data flow result=40 09:24:30 Set A/D channel type result=40 09:24:30 Set A/D encoding result=40 09:24:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:30 Set channel filter=0.000000e+000 result=40 09:24:30 Config A/D Result=40 09:24:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:30 Get A/D filter: -9.255963e+061 result=40 09:24:30 Get A/D value=-858993460 result=40 09:24:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:30 Parameters OK 09:24:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:30 Set A/D data flow result=40 09:24:30 Set A/D channel type result=40 09:24:30 Set A/D encoding result=40 09:24:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:30 Set channel filter=0.000000e+000 result=40 09:24:30 Config A/D Result=40 09:24:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:30 Get A/D filter: -9.255963e+061 result=40 09:24:30 Get A/D value=-858993460 result=40 09:24:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:30 Aux= 09:24:30 Message to Camera, serial 112009 queued 09:25:05 Received message from Master: op=PointingHead serial=112021 09:25:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:25:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:25:06 Point started: ret=0 09:25:06 point_skyscan result=0 09:25:07 Check angles 09:25:07 SkyScan query 09:25:07 SkyScan query done: ret=0 az=135.24<-9016 ze=36.975<-9535 Statuses=0009 0009 09:25:07 Msec=0 True Az=135.24 Ze=36.975 Az status=0009 Ze status=0009 09:25:07 Check angles 09:25:07 SkyScan query 09:25:08 SkyScan query done: ret=0 az=117.36<-7824 ze=15.645<-10957 Statuses=0009 0009 09:25:08 Msec=750 True Az=117.36 Ze=15.645 Az status=0009 Ze status=0009 09:25:08 Check angles 09:25:08 SkyScan query 09:25:09 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.34<-12356 Statuses=0009 0009 09:25:09 Msec=1500 True Az=99.96 Ze=-5.34 Az status=0009 Ze status=0009 09:25:09 Check angles 09:25:09 SkyScan query 09:25:09 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.385<-13759 Statuses=0009 0009 09:25:09 Msec=2250 True Az=82.47 Ze=-26.385 Az status=0009 Ze status=0009 09:25:10 Check angles 09:25:10 SkyScan query 09:25:10 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.565<-14571 Statuses=0009 0008 09:25:10 Msec=3000 True Az=64.605 Ze=-38.565 Az status=0009 Ze status=0008 09:25:10 Check angles 09:25:10 SkyScan query 09:25:11 SkyScan query done: ret=0 az=47.175<-3145 ze=-38.535<-14569 Statuses=0009 0008 09:25:11 Msec=3750 True Az=47.175 Ze=-38.535 Az status=0009 Ze status=0008 09:25:11 Check angles 09:25:11 SkyScan query 09:25:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:25:12 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:25:12 Message to Master queued w/err=0: serial=112021 error=0 09:25:17 Received message from Master: op=Filter serial=112022 09:25:17 Color wheel filter change from 0 to 0 09:25:17 FLIGetFilterPos err=0 currentPosition=0 09:25:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:17 Filter is already there-color wheel unchanged 09:25:17 Received message from Master: op=Shutter serial=112023 09:25:17 Shutter LASER close 09:25:17 Received message from Camera: op=State serial=112025 09:25:17 GetSingleValue result=40 Value=cccccccc 09:25:17 SkyScan query 09:25:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:25:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:17 Parameters OK 09:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:17 Set A/D data flow result=40 09:25:17 Set A/D channel type result=40 09:25:17 Set A/D encoding result=40 09:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:17 Set channel filter=0.000000e+000 result=40 09:25:17 Config A/D Result=40 09:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:17 Get A/D filter: -9.255963e+061 result=40 09:25:17 Get A/D value=-858993460 result=40 09:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:17 Parameters OK 09:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:17 Set A/D data flow result=40 09:25:17 Set A/D channel type result=40 09:25:17 Set A/D encoding result=40 09:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:17 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-13 09:25:17] 09:25:17 Config A/D Result=40 09:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:17 Get A/D filter: -9.255963e+061 result=40 09:25:17 Get A/D value=-858993460 result=40 09:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:17 Aux= 09:25:17 Message to Camera, serial 112025 queued 09:25:54 Received message from Master: op=PointingHead serial=112038 09:25:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:25:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:25:55 Point started: ret=0 09:25:55 point_skyscan result=0 09:25:55 Check angles 09:25:55 SkyScan query 09:25:56 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.13<-16542 Statuses=0009 0009 09:25:56 Msec=0 True Az=63.885 Ze=-68.13 Az status=0009 Ze status=0009 09:25:56 Check angles 09:25:56 SkyScan query 09:25:57 SkyScan query done: ret=0 az=81.705<-5447 ze=-89.58<-17972 Statuses=0009 0009 09:25:57 Msec=750 True Az=81.705 Ze=-89.58 Az status=0009 Ze status=0009 09:25:57 Check angles 09:25:57 SkyScan query 09:25:57 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.535<-19369 Statuses=0009 0009 09:25:57 Msec=1500 True Az=99.06 Ze=-110.535 Az status=0009 Ze status=0009 09:25:58 Check angles 09:25:58 SkyScan query 09:25:58 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.49<-20766 Statuses=0009 0009 09:25:58 Msec=2250 True Az=116.67 Ze=-131.49 Az status=0009 Ze status=0009 09:25:58 Check angles 09:25:58 SkyScan query 09:25:59 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 09:25:59 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 09:25:59 Check angles 09:25:59 SkyScan query 09:26:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:26:00 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:26:00 Message to Master queued w/err=0: serial=112038 error=0 09:26:05 Received message from Master: op=Filter serial=112039 09:26:05 Color wheel filter change from 0 to 0 09:26:05 FLIGetFilterPos err=0 currentPosition=0 09:26:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:05 Filter is already there-color wheel unchanged 09:26:05 Received message from Master: op=Shutter serial=112040 09:26:05 Shutter LASER close 09:26:05 Received message from Camera: op=State serial=112042 09:26:05 GetSingleValue result=40 Value=cccccccc 09:26:05 SkyScan query 09:26:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:26:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:05 Parameters OK 09:26:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:05 Set A/D data flow result=40 09:26:05 Set A/D channel type result=40 09:26:05 Set A/D encoding result=40 09:26:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:05 Set channel filter=0.000000e+000 result=40 09:26:05 Config A/D Result=40 09:26:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:05 Get A/D filter: -9.255963e+061 result=40 09:26:05 Get A/D value=-858993460 result=40 09:26:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:05 Parameters OK 09:26:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:05 Set A/D data flow result=40 09:26:05 Set A/D channel type result=40 09:26:05 Set A/D encoding result=40 09:26:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:05 Set channel filter=0.000000e+000 result=40 09:26:05 Config A/D Result=40 09:26:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:05 Get A/D filter: -9.255963e+061 result=40 09:26:05 Get A/D value=-858993460 result=40 09:26:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:05 Aux= 09:26:05 Message to Camera, serial 112042 queued 09:26:42 Received message from Master: op=PointingHead serial=112055 09:26:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:26:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:26:43 Point started: ret=0 09:26:43 point_skyscan result=0 09:26:43 Check angles 09:26:43 SkyScan query 09:26:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 09:26:44 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 09:26:44 Check angles 09:26:44 SkyScan query 09:26:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:26:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:26:45 Message to Master queued w/err=0: serial=112055 error=0 09:26:50 Received message from Master: op=Filter serial=112056 09:26:50 Color wheel filter change from 0 to 0 09:26:50 FLIGetFilterPos err=0 currentPosition=0 09:26:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:50 Filter is already there-color wheel unchanged 09:26:50 Received message from Master: op=Shutter serial=112057 09:26:50 Shutter LASER open 09:26:50 Received message from Camera: op=State serial=112059 09:26:50 GetSingleValue result=40 Value=cccccccc 09:26:50 SkyScan query 09:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:26:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:51 Parameters OK 09:26:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:51 Set A/D data flow result=40 09:26:51 Set A/D channel type result=40 09:26:51 Set A/D encoding result=40 09:26:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:51 Set channel filter=0.000000e+000 result=40 09:26:51 Config A/D Result=40 09:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:51 Get A/D filter: -9.255963e+061 result=40 09:26:51 Get A/D value=-858993460 result=40 09:26:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:51 Parameters OK 09:26:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:51 Set A/D data flow result=40 09:26:51 Set A/D channel type result=40 09:26:51 Set A/D encoding result=40 09:26:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:51 Set channel filter=0.000000e+000 result=40 09:26:51 Config A/D Result=40 09:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:51 Get A/D filter: -9.255963e+061 result=40 09:26:51 Get A/D value=-858993460 result=40 09:26:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:51 Aux= 09:26:51 Message to Camera, serial 112059 queued 09:26:59 Received message from Master: op=Shutter serial=112069 09:26:59 Shutter LASER close 09:27:00 Received message from Master: op=PointingHead serial=112073 09:27:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:27:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:27:00 Point started: ret=0 09:27:00 point_skyscan result=0 09:27:01 Check angles 09:27:01 SkyScan query 09:27:01 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.52<-21568 Statuses=0009 0009 09:27:01 Msec=0 True Az=135.72 Ze=-143.52 Az status=0009 Ze status=0009 09:27:02 Check angles 09:27:02 SkyScan query 09:27:02 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.565<-20171 Statuses=0009 0009 09:27:02 Msec=750 True Az=153.24 Ze=-122.565 Az status=0009 Ze status=0009 09:27:02 Check angles 09:27:02 SkyScan query 09:27:03 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.64<-18776 Statuses=0009 0009 09:27:03 Msec=1500 True Az=170.775 Ze=-101.64 Az status=0009 Ze status=0009 09:27:03 Check angles 09:27:03 SkyScan query 09:27:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.61<-17374 Statuses=0008 0009 09:27:04 Msec=2250 True Az=176.01 Ze=-80.61 Az status=0008 Ze status=0009 09:27:04 Check angles 09:27:04 SkyScan query 09:27:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.685<-15979 Statuses=0008 0009 09:27:04 Msec=3000 True Az=176.01 Ze=-59.685 Az status=0008 Ze status=0009 09:27:05 Check angles 09:27:05 SkyScan query 09:27:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:27:05 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:27:05 Message to Master queued w/err=0: serial=112073 error=0 09:27:10 Received message from Master: op=Filter serial=112074 09:27:10 Color wheel filter change from 0 to 0 09:27:10 FLIGetFilterPos err=0 currentPosition=0 09:27:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:10 Filter is already there-color wheel unchanged 09:27:10 Received message from Master: op=Shutter serial=112075 09:27:10 Shutter LASER close 09:27:10 Received message from Camera: op=State serial=112077 09:27:10 GetSingleValue result=40 Value=cccccccc 09:27:10 SkyScan query 09:27:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:27:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:11 Parameters OK 09:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:11 Set A/D data flow result=40 09:27:11 Set A/D channel type result=40 09:27:11 Set A/D encoding result=40 09:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:11 Set channel filter=0.000000e+000 result=40 09:27:11 Config A/D Result=40 09:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:11 Get A/D filter: -9.255963e+061 result=40 09:27:11 Get A/D value=-858993460 result=40 09:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:11 Parameters OK 09:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:11 Set A/D data flow result=40 09:27:11 Set A/D channel type result=40 09:27:11 Set A/D encoding result=40 09:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:11 Set channel filter=0.000000e+000 result=40 09:27:11 Config A/D Result=40 09:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:11 Get A/D filter: -9.255963e+061 result=40 09:27:11 Get A/D value=-858993460 result=40 09:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:11 Aux= 09:27:11 Message to Camera, serial 112077 queued 09:27:48 Received message from Master: op=PointingHead serial=112090 09:27:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:27:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:27:48 Point started: ret=0 09:27:48 point_skyscan result=0 09:27:49 Check angles 09:27:49 SkyScan query 09:27:50 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.42<-13428 Statuses=0009 0009 09:27:50 Msec=0 True Az=152.595 Ze=-21.42 Az status=0009 Ze status=0009 09:27:50 Check angles 09:27:50 SkyScan query 09:27:50 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.45<-12030 Statuses=0009 0009 09:27:50 Msec=750 True Az=135.09 Ze=-0.45 Az status=0009 Ze status=0009 09:27:50 Check angles 09:27:50 SkyScan query 09:27:51 SkyScan query done: ret=0 az=117.555<-7837 ze=20.46<-10636 Statuses=0009 0009 09:27:51 Msec=1500 True Az=117.555 Ze=20.46 Az status=0009 Ze status=0009 09:27:51 Check angles 09:27:51 SkyScan query 09:27:52 SkyScan query done: ret=0 az=100.17<-6678 ze=41.46<-9236 Statuses=0009 0009 09:27:52 Msec=2250 True Az=100.17 Ze=41.46 Az status=0009 Ze status=0009 09:27:52 Check angles 09:27:52 SkyScan query 09:27:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 09:27:53 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 09:27:53 Check angles 09:27:53 SkyScan query 09:27:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:27:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:27:53 Message to Master queued w/err=0: serial=112090 error=0 09:27:58 Received message from Master: op=Filter serial=112091 09:27:58 Color wheel filter change from 0 to 0 09:27:58 FLIGetFilterPos err=0 currentPosition=0 09:27:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:58 Filter is already there-color wheel unchanged 09:27:58 Received message from Master: op=Shutter serial=112092 09:27:58 Shutter LASER close 09:27:59 Received message from Camera: op=State serial=112094 09:27:59 GetSingleValue result=40 Value=cccccccc 09:27:59 SkyScan query 09:27:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:27:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:59 Parameters OK 09:27:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:59 Set A/D data flow result=40 09:27:59 Set A/D channel type result=40 09:27:59 Set A/D encoding result=40 09:27:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:59 Set channel filter=0.000000e+000 result=40 09:27:59 Config A/D Result=40 09:27:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:59 Get A/D filter: -9.255963e+061 result=40 09:27:59 Get A/D value=-858993460 result=40 09:27:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:59 Parameters OK 09:27:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:59 Set A/D data flow result=40 09:27:59 Set A/D channel type result=40 09:27:59 Set A/D encoding result=40 09:27:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:59 Set channel filter=0.000000e+000 result=40 09:27:59 Config A/D Result=40 09:27:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:59 Get A/D filter: -9.255963e+061 result=40 09:27:59 Get A/D value=-858993460 result=40 09:27:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:59 Aux= 09:27:59 Message to Camera, serial 112094 queued 09:28:36 Received message from Master: op=PointingHead serial=112107 09:28:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:28:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:28:36 Point started: ret=0 09:28:36 point_skyscan result=0 09:28:37 Check angles 09:28:37 SkyScan query 09:28:38 SkyScan query done: ret=0 az=109.44<-7296 ze=38.49<-9434 Statuses=0009 0008 09:28:38 Msec=0 True Az=109.44 Ze=38.49 Az status=0009 Ze status=0008 09:28:38 Check angles 09:28:38 SkyScan query 09:28:38 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 09:28:38 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 09:28:39 Check angles 09:28:39 SkyScan query 09:28:39 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 09:28:39 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 09:28:39 Check angles 09:28:39 SkyScan query 09:28:40 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 09:28:40 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 09:28:40 Check angles 09:28:40 SkyScan query 09:28:41 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:28:41 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:28:41 Check angles 09:28:41 SkyScan query 09:28:41 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:28:41 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:28:41 Message to Master queued w/err=0: serial=112107 error=0 09:28:46 Received message from Master: op=Filter serial=112108 09:28:46 Color wheel filter change from 0 to 0 09:28:46 FLIGetFilterPos err=0 currentPosition=0 09:28:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:46 Filter is already there-color wheel unchanged 09:28:47 Received message from Master: op=Shutter serial=112109 09:28:47 Shutter LASER close 09:28:47 Received message from Camera: op=State serial=112111 09:28:47 GetSingleValue result=40 Value=cccccccc 09:28:47 SkyScan query 09:28:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:28:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:47 Parameters OK 09:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:47 Set A/D data flow result=40 09:28:47 Set A/D channel type result=40 09:28:47 Set A/D encoding result=40 09:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:47 Set channel filter=0.000000e+000 result=40 09:28:47 Config A/D Result=40 09:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:47 Get A/D filter: -9.255963e+061 result=40 09:28:47 Get A/D value=-858993460 result=40 09:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:47 Parameters OK 09:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:47 Set A/D data flow result=40 09:28:47 Set A/D channel type result=40 09:28:47 Set A/D encoding result=40 09:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:47 Set channel filter=0.000000e+000 result=40 09:28:47 Config A/D Result=40 09:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:47 Get A/D filter: -9.255963e+061 result=40 09:28:47 Get A/D value=-858993460 result=40 09:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:47 Aux= 09:28:47 Message to Camera, serial 112111 queued 09:29:24 Received message from Master: op=PointingHead serial=112124 09:29:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:29:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:29:24 Point started: ret=0 09:29:24 point_skyscan result=0 09:29:25 Check angles 09:29:25 SkyScan query 09:29:26 SkyScan query done: ret=0 az=153.15<-10210 ze=8.88<-11408 Statuses=0009 0009 09:29:26 Msec=0 True Az=153.15 Ze=8.88 Az status=0009 Ze status=0009 09:29:26 Check angles 09:29:26 SkyScan query 09:29:27 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.09<-12806 Statuses=0009 0009 09:29:27 Msec=750 True Az=135.705 Ze=-12.09 Az status=0009 Ze status=0009 09:29:27 Check angles 09:29:27 SkyScan query 09:29:27 SkyScan query done: ret=0 az=118.155<-7877 ze=-33<-14200 Statuses=0009 0009 09:29:27 Msec=1500 True Az=118.155 Ze=-33 Az status=0009 Ze status=0009 09:29:27 Check angles 09:29:27 SkyScan query 09:29:28 SkyScan query done: ret=0 az=100.755<-6717 ze=-51.51<-15434 Statuses=0009 0009 09:29:28 Msec=2250 True Az=100.755 Ze=-51.51 Az status=0009 Ze status=0009 09:29:28 Check angles 09:29:28 SkyScan query 09:29:29 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:29:29 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:29:29 Check angles 09:29:29 SkyScan query 09:29:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:29:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:29:30 Message to Master queued w/err=0: serial=112124 error=0 09:29:35 Received message from Master: op=Filter serial=112125 09:29:35 Color wheel filter change from 0 to 0 09:29:35 FLIGetFilterPos err=0 currentPosition=0 09:29:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:35 Filter is already there-color wheel unchanged 09:29:35 Received message from Master: op=Shutter serial=112126 09:29:35 Shutter LASER close 09:29:35 Received message from Camera: op=State serial=112128 09:29:35 GetSingleValue result=40 Value=cccccccc 09:29:35 SkyScan query 09:29:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:35 Parameters OK 09:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:35 Set A/D data flow result=40 09:29:35 Set A/D channel type result=40 09:29:35 Set A/D encoding result=40 09:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:35 Set channel filter=0.000000e+000 result=40 09:29:35 Config A/D Result=40 09:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:35 Get A/D filter: -9.255963e+061 result=40 09:29:35 Get A/D value=-858993460 result=40 09:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:35 Parameters OK 09:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:35 Set A/D data flow result=40 09:29:35 Set A/D channel type result=40 09:29:35 Set A/D encoding result=40 09:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:35 Set channel filter=0.000000e+000 result=40 09:29:35 Config A/D Result=40 09:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:35 Get A/D filter: -9.255963e+061 result=40 09:29:35 Get A/D value=-858993460 result=40 09:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:35 Aux= 09:29:35 Message to Camera, serial 112128 queued 09:30:12 Received message from Master: op=PointingHead serial=112141 09:30:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:30:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:30:12 Point started: ret=0 09:30:12 point_skyscan result=0 09:30:13 Check angles 09:30:13 SkyScan query 09:30:14 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.06<-17404 Statuses=0009 0009 09:30:14 Msec=0 True Az=108.81 Ze=-81.06 Az status=0009 Ze status=0009 09:30:14 Check angles 09:30:14 SkyScan query 09:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 09:30:15 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 09:30:15 Check angles 09:30:15 SkyScan query 09:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.985<-20199 Statuses=0008 0009 09:30:15 Msec=1500 True Az=112.995 Ze=-122.985 Az status=0008 Ze status=0009 09:30:15 Check angles 09:30:15 SkyScan query 09:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 09:30:16 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 09:30:16 Check angles 09:30:16 SkyScan query 09:30:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 09:30:17 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 09:30:17 Check angles 09:30:17 SkyScan query 09:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:30:18 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:30:18 Message to Master queued w/err=0: serial=112141 error=0 09:30:23 Received message from Master: op=Filter serial=112142 09:30:23 Color wheel filter change from 0 to 0 09:30:23 FLIGetFilterPos err=0 currentPosition=0 09:30:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:23 Filter is already there-color wheel unchanged 09:30:23 Received message from Master: op=Shutter serial=112143 09:30:23 Shutter LASER open 09:30:23 Received message from Camera: op=State serial=112145 09:30:23 GetSingleValue result=40 Value=cccccccc 09:30:23 SkyScan query 09:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:30:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:23 Parameters OK 09:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:23 Set A/D data flow result=40 09:30:23 Set A/D channel type result=40 09:30:23 Set A/D encoding result=40 09:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:23 Set channel filter=0.000000e+000 result=40 09:30:23 Config A/D Result=40 09:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:23 Get A/D filter: -9.255963e+061 result=40 09:30:23 Get A/D value=-858993460 result=40 09:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:23 Parameters OK 09:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:23 Set A/D data flow result=40 09:30:23 Set A/D channel type result=40 09:30:23 Set A/D encoding result=40 09:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:23 Set channel filter=0.000000e+000 result=40 09:30:23 Config A/D Result=40 09:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:23 Get A/D filter: -9.255963e+061 result=40 09:30:23 Get A/D value=-858993460 result=40 09:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:23 Aux= 09:30:23 Message to Camera, serial 112145 queued 09:30:31 Received message from Master: op=Shutter serial=112154 09:30:31 Shutter LASER close 09:30:31 Received message from Master: op=PointingHead serial=112158 09:30:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:30:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:30:32 Point started: ret=0 09:30:32 point_skyscan result=0 09:30:33 Check angles 09:30:33 SkyScan query 09:30:33 SkyScan query done: ret=0 az=89.82<-5988 ze=157.065<-1529 Statuses=0009 0009 09:30:33 Msec=0 True Az=89.82 Ze=157.065 Az status=0009 Ze status=0009 09:30:33 Check angles 09:30:33 SkyScan query 09:30:34 SkyScan query done: ret=0 az=71.85<-4790 ze=135.675<-2955 Statuses=0009 0009 09:30:34 Msec=750 True Az=71.85 Ze=135.675 Az status=0009 Ze status=0009 09:30:34 Check angles 09:30:34 SkyScan query 09:30:35 SkyScan query done: ret=0 az=54.6<-3640 ze=114.69<-4354 Statuses=0009 0009 09:30:35 Msec=1500 True Az=54.6 Ze=114.69 Az status=0009 Ze status=0009 09:30:35 Check angles 09:30:35 SkyScan query 09:30:35 SkyScan query done: ret=0 az=40.92<-2728 ze=93.705<-5753 Statuses=0009 0009 09:30:35 Msec=2250 True Az=40.92 Ze=93.705 Az status=0009 Ze status=0009 09:30:36 Check angles 09:30:36 SkyScan query 09:30:36 SkyScan query done: ret=0 az=40.995<-2733 ze=72.795<-7147 Statuses=0008 0009 09:30:36 Msec=3000 True Az=40.995 Ze=72.795 Az status=0008 Ze status=0009 09:30:36 Check angles 09:30:36 SkyScan query 09:30:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 09:30:37 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 09:30:37 Check angles 09:30:37 SkyScan query 09:30:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:30:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:30:38 Message to Master queued w/err=0: serial=112158 error=0 09:30:43 Received message from Master: op=Filter serial=112159 09:30:43 Color wheel filter change from 0 to 0 09:30:43 FLIGetFilterPos err=0 currentPosition=0 09:30:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:43 Filter is already there-color wheel unchanged 09:30:43 Received message from Master: op=Shutter serial=112160 09:30:43 Shutter LASER close 09:30:43 Received message from Camera: op=State serial=112162 09:30:43 GetSingleValue result=40 Value=cccccccc 09:30:43 SkyScan query 09:30:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:30:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:44 Parameters OK 09:30:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:44 Set A/D data flow result=40 09:30:44 Set A/D channel type result=40 09:30:44 Set A/D encoding result=40 09:30:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:44 Set channel filter=0.000000e+000 result=40 09:30:44 Config A/D Result=40 09:30:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:44 Get A/D filter: -9.255963e+061 result=40 09:30:44 Get A/D value=-858993460 result=40 09:30:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:44 Parameters OK 09:30:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:44 Set A/D data flow result=40 09:30:44 Set A/D channel type result=40 09:30:44 Set A/D encoding result=40 09:30:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:44 Set channel filter=0.000000e+000 result=40 09:30:44 Config A/D Result=40 09:30:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:44 Get A/D filter: -9.255963e+061 result=40 09:30:44 Get A/D value=-858993460 result=40 09:30:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:44 Aux= 09:30:44 Message to Camera, serial 112162 queued 09:31:20 Received message from Master: op=PointingHead serial=112175 09:31:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:31:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:31:21 Point started: ret=0 09:31:21 point_skyscan result=0 09:31:22 Check angles 09:31:22 SkyScan query 09:31:22 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 09:31:22 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 09:31:22 Check angles 09:31:22 SkyScan query 09:31:23 SkyScan query done: ret=0 az=82.305<-5487 ze=66.495<-7567 Statuses=0009 0008 09:31:23 Msec=750 True Az=82.305 Ze=66.495 Az status=0009 Ze status=0008 09:31:23 Check angles 09:31:23 SkyScan query 09:31:24 SkyScan query done: ret=0 az=99.795<-6653 ze=66.495<-7567 Statuses=0009 0008 09:31:24 Msec=1500 True Az=99.795 Ze=66.495 Az status=0009 Ze status=0008 09:31:24 Check angles 09:31:24 SkyScan query 09:31:24 SkyScan query done: ret=0 az=117.36<-7824 ze=66.495<-7567 Statuses=0009 0008 09:31:24 Msec=2250 True Az=117.36 Ze=66.495 Az status=0009 Ze status=0008 09:31:25 Check angles 09:31:25 SkyScan query 09:31:25 SkyScan query done: ret=0 az=134.79<-8986 ze=66.495<-7567 Statuses=0009 0008 09:31:25 Msec=3000 True Az=134.79 Ze=66.495 Az status=0009 Ze status=0008 09:31:25 Check angles 09:31:25 SkyScan query 09:31:26 SkyScan query done: ret=0 az=152.13<-10142 ze=66.495<-7567 Statuses=0009 0008 09:31:26 Msec=3750 True Az=152.13 Ze=66.495 Az status=0009 Ze status=0008 09:31:26 Check angles 09:31:26 SkyScan query 09:31:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:31:27 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 09:31:27 Message to Master queued w/err=0: serial=112175 error=0 09:31:32 Received message from Master: op=Filter serial=112176 09:31:32 Color wheel filter change from 0 to 0 09:31:32 FLIGetFilterPos err=0 currentPosition=0 09:31:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:32 Filter is already there-color wheel unchanged 09:31:32 Received message from Master: op=Shutter serial=112177 09:31:32 Shutter LASER close 09:31:32 Received message from Camera: op=State serial=112179 09:31:32 GetSingleValue result=40 Value=cccccccc 09:31:32 SkyScan query 09:31:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:31:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:32 Parameters OK 09:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:32 Set A/D data flow result=40 09:31:32 Set A/D channel type result=40 09:31:32 Set A/D encoding result=40 09:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:32 Set channel filter=0.000000e+000 result=40 09:31:32 Config A/D Result=40 09:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:32 Get A/D filter: -9.255963e+061 result=40 09:31:32 Get A/D value=-858993460 result=40 09:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:32 Parameters OK 09:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:32 Set A/D data flow result=40 09:31:32 Set A/D channel type result=40 09:31:32 Set A/D encoding result=40 09:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:32 Set channel filter=0.000000e+000 result=40 09:31:32 Config A/D Result=40 09:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:32 Get A/D filter: -9.255963e+061 result=40 09:31:32 Get A/D value=-858993460 result=40 09:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:32 Aux= 09:31:32 Message to Camera, serial 112179 queued 09:32:09 Received message from Master: op=PointingHead serial=112192 09:32:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:32:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:32:10 Point started: ret=0 09:32:10 point_skyscan result=0 09:32:10 Check angles 09:32:10 SkyScan query 09:32:11 SkyScan query done: ret=0 az=135.015<-9001 ze=36.81<-9546 Statuses=0009 0009 09:32:11 Msec=0 True Az=135.015 Ze=36.81 Az status=0009 Ze status=0009 09:32:11 Check angles 09:32:11 SkyScan query 09:32:12 SkyScan query done: ret=0 az=117.6<-7840 ze=15.84<-10944 Statuses=0009 0009 09:32:12 Msec=750 True Az=117.6 Ze=15.84 Az status=0009 Ze status=0009 09:32:12 Check angles 09:32:12 SkyScan query 09:32:12 SkyScan query done: ret=0 az=100.215<-6681 ze=-5.115<-12341 Statuses=0009 0009 09:32:12 Msec=1500 True Az=100.215 Ze=-5.115 Az status=0009 Ze status=0009 09:32:13 Check angles 09:32:13 SkyScan query 09:32:13 SkyScan query done: ret=0 az=82.56<-5504 ze=-26.085<-13739 Statuses=0009 0009 09:32:13 Msec=2250 True Az=82.56 Ze=-26.085 Az status=0009 Ze status=0009 09:32:13 Check angles 09:32:13 SkyScan query 09:32:14 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.58<-14572 Statuses=0009 0008 09:32:14 Msec=3000 True Az=64.77 Ze=-38.58 Az status=0009 Ze status=0008 09:32:14 Check angles 09:32:14 SkyScan query 09:32:15 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.535<-14569 Statuses=0009 0008 09:32:15 Msec=3750 True Az=47.31 Ze=-38.535 Az status=0009 Ze status=0008 09:32:15 Check angles 09:32:15 SkyScan query 09:32:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:32:15 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:32:15 Message to Master queued w/err=0: serial=112192 error=0 09:32:20 Received message from Master: op=Filter serial=112193 09:32:20 Color wheel filter change from 0 to 0 09:32:20 FLIGetFilterPos err=0 currentPosition=0 09:32:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:20 Filter is already there-color wheel unchanged 09:32:21 Received message from Master: op=Shutter serial=112194 09:32:21 Shutter LASER close 09:32:21 Received message from Camera: op=State serial=112196 09:32:21 GetSingleValue result=40 Value=cccccccc 09:32:21 SkyScan query 09:32:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:32:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:21 Parameters OK 09:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:21 Set A/D data flow result=40 09:32:21 Set A/D channel type result=40 09:32:21 Set A/D encoding result=40 09:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:21 Set channel filter=0.000000e+000 result=40 09:32:21 Config A/D Result=40 09:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:21 Get A/D filter: -9.255963e+061 result=40 09:32:21 Get A/D value=-858993460 result=40 09:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:21 Parameters OK 09:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:21 Set A/D data flow result=40 09:32:21 Set A/D channel type result=40 09:32:21 Set A/D encoding result=40 09:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:21 Set channel filter=0.000000e+000 result=40 09:32:21 Config A/D Result=40 09:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:21 Get A/D filter: -9.255963e+061 result=40 09:32:21 Get A/D value=-858993460 result=40 09:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:21 Aux= 09:32:21 Message to Camera, serial 112196 queued 09:32:58 Received message from Master: op=PointingHead serial=112209 09:32:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:32:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:32:58 Point started: ret=0 09:32:58 point_skyscan result=0 09:32:59 Check angles 09:32:59 SkyScan query 09:33:00 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.37<-16558 Statuses=0009 0009 09:33:00 Msec=0 True Az=64.2 Ze=-68.37 Az status=0009 Ze status=0009 09:33:00 Check angles 09:33:00 SkyScan query 09:33:00 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.4<-17960 Statuses=0009 0009 09:33:00 Msec=750 True Az=81.585 Ze=-89.4 Az status=0009 Ze status=0009 09:33:01 Check angles 09:33:01 SkyScan query 09:33:01 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.79<-19386 Statuses=0009 0009 09:33:01 Msec=1500 True Az=99.45 Ze=-110.79 Az status=0009 Ze status=0009 09:33:01 Check angles 09:33:01 SkyScan query 09:33:02 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.7<-20780 Statuses=0009 0009 09:33:02 Msec=2250 True Az=116.85 Ze=-131.7 Az status=0009 Ze status=0009 09:33:02 Check angles 09:33:02 SkyScan query 09:33:03 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 09:33:03 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 09:33:03 Check angles 09:33:03 SkyScan query 09:33:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:33:04 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:33:04 Message to Master queued w/err=0: serial=112209 error=0 09:33:09 Received message from Master: op=Filter serial=112210 09:33:09 Color wheel filter change from 0 to 0 09:33:09 FLIGetFilterPos err=0 currentPosition=0 09:33:09 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:09 Filter is already there-color wheel unchanged 09:33:09 Received message from Master: op=Shutter serial=112211 09:33:09 Shutter LASER close 09:33:09 Received message from Camera: op=State serial=112213 09:33:09 GetSingleValue result=40 Value=cccccccc 09:33:09 SkyScan query 09:33:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:33:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:09 Parameters OK 09:33:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:09 Set A/D data flow result=40 09:33:09 Set A/D channel type result=40 09:33:09 Set A/D encoding result=40 09:33:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:09 Set channel filter=0.000000e+000 result=40 09:33:09 Config A/D Result=40 09:33:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:09 Get A/D filter: -9.255963e+061 result=40 09:33:09 Get A/D value=-858993460 result=40 09:33:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:09 Parameters OK 09:33:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:09 Set A/D data flow result=40 09:33:09 Set A/D channel type result=40 09:33:09 Set A/D encoding result=40 09:33:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:09 Set channel filter=0.000000e+000 result=40 09:33:09 Config A/D Result=40 09:33:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:09 Get A/D filter: -9.255963e+061 result=40 09:33:09 Get A/D value=-858993460 result=40 09:33:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:09 Aux= 09:33:09 Message to Camera, serial 112213 queued 09:33:46 Received message from Master: op=PointingHead serial=112226 09:33:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:33:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:33:46 Point started: ret=0 09:33:46 point_skyscan result=0 09:33:47 Check angles 09:33:47 SkyScan query 09:33:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 09:33:48 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 09:33:48 Check angles 09:33:48 SkyScan query 09:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:33:49 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:33:49 Message to Master queued w/err=0: serial=112226 error=0 09:33:54 Received message from Master: op=Filter serial=112227 09:33:54 Color wheel filter change from 0 to 0 09:33:54 FLIGetFilterPos err=0 currentPosition=0 09:33:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:54 Filter is already there-color wheel unchanged 09:33:54 Received message from Master: op=Shutter serial=112228 09:33:54 Shutter LASER open 09:33:54 Received message from Camera: op=State serial=112230 09:33:54 GetSingleValue result=40 Value=cccccccc 09:33:54 SkyScan query 09:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:33:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:54 Parameters OK 09:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:54 Set A/D data flow result=40 09:33:54 Set A/D channel type result=40 09:33:54 Set A/D encoding result=40 09:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:54 Set channel filter=0.000000e+000 result=40 09:33:54 Config A/D Result=40 09:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:54 Get A/D filter: -9.255963e+061 result=40 09:33:54 Get A/D value=-858993460 result=40 09:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:54 Parameters OK 09:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:54 Set A/D data flow result=40 09:33:54 Set A/D channel type result=40 09:33:54 Set A/D encoding result=40 09:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:54 Set channel filter=0.000000e+000 result=40 09:33:54 Config A/D Result=40 09:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:54 Get A/D filter: -9.255963e+061 result=40 09:33:54 Get A/D value=-858993460 result=40 09:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:54 Aux= 09:33:54 Message to Camera, serial 112230 queued 09:34:03 Received message from Master: op=Shutter serial=112240 09:34:03 Shutter LASER close 09:34:04 Received message from Master: op=PointingHead serial=112244 09:34:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:34:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:34:04 Point started: ret=0 09:34:04 point_skyscan result=0 09:34:05 Check angles 09:34:05 SkyScan query 09:34:05 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.22<-21548 Statuses=0009 0009 09:34:05 Msec=0 True Az=135.975 Ze=-143.22 Az status=0009 Ze status=0009 09:34:05 Check angles 09:34:05 SkyScan query 09:34:06 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.25<-20150 Statuses=0009 0009 09:34:06 Msec=750 True Az=153.48 Ze=-122.25 Az status=0009 Ze status=0009 09:34:06 Check angles 09:34:06 SkyScan query 09:34:07 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.355<-18757 Statuses=0009 0009 09:34:07 Msec=1500 True Az=170.97 Ze=-101.355 Az status=0009 Ze status=0009 09:34:07 Check angles 09:34:07 SkyScan query 09:34:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.935<-17329 Statuses=0008 0009 09:34:08 Msec=2250 True Az=176.01 Ze=-79.935 Az status=0008 Ze status=0009 09:34:08 Check angles 09:34:08 SkyScan query 09:34:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.935<-15929 Statuses=0008 0009 09:34:08 Msec=3000 True Az=176.01 Ze=-58.935 Az status=0008 Ze status=0009 09:34:08 Check angles 09:34:08 SkyScan query 09:34:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:34:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:34:09 Message to Master queued w/err=0: serial=112244 error=0 09:34:14 Received message from Master: op=Filter serial=112245 09:34:14 Color wheel filter change from 0 to 0 09:34:14 FLIGetFilterPos err=0 currentPosition=0 09:34:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:14 Filter is already there-color wheel unchanged 09:34:14 Received message from Master: op=Shutter serial=112246 09:34:14 Shutter LASER close 09:34:14 Received message from Camera: op=State serial=112248 09:34:14 GetSingleValue result=40 Value=cccccccc 09:34:14 SkyScan query 09:34:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:34:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:15 Parameters OK 09:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:15 Set A/D data flow result=40 09:34:15 Set A/D channel type result=40 09:34:15 Set A/D encoding result=40 09:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:15 Set channel filter=0.000000e+000 result=40 09:34:15 Config A/D Result=40 09:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:15 Get A/D filter: -9.255963e+061 result=40 09:34:15 Get A/D value=-858993460 result=40 09:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:15 Parameters OK 09:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:15 Set A/D data flow result=40 09:34:15 Set A/D channel type result=40 09:34:15 Set A/D encoding result=40 09:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:15 Set channel filter=0.000000e+000 result=40 09:34:15 Config A/D Result=40 09:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:15 Get A/D filter: -9.255963e+061 result=40 09:34:15 Get A/D value=-858993460 result=40 09:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:15 Aux= 09:34:15 Message to Camera, serial 112248 queued 09:34:52 Received message from Master: op=PointingHead serial=112261 09:34:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:34:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:34:52 Point started: ret=0 09:34:52 point_skyscan result=0 09:34:53 Check angles 09:34:53 SkyScan query 09:34:53 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.75<-13450 Statuses=0009 0009 09:34:53 Msec=0 True Az=152.955 Ze=-21.75 Az status=0009 Ze status=0009 09:34:54 Check angles 09:34:54 SkyScan query 09:34:54 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.3<-12020 Statuses=0009 0009 09:34:54 Msec=750 True Az=135.135 Ze=-0.3 Az status=0009 Ze status=0009 09:34:54 Check angles 09:34:54 SkyScan query 09:34:55 SkyScan query done: ret=0 az=117.255<-7817 ze=21.09<-10594 Statuses=0009 0009 09:34:55 Msec=1500 True Az=117.255 Ze=21.09 Az status=0009 Ze status=0009 09:34:55 Check angles 09:34:55 SkyScan query 09:34:56 SkyScan query done: ret=0 az=99.525<-6635 ze=42.435<-9171 Statuses=0009 0009 09:34:56 Msec=2250 True Az=99.525 Ze=42.435 Az status=0009 Ze status=0009 09:34:56 Check angles 09:34:56 SkyScan query 09:34:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 09:34:56 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 09:34:57 Check angles 09:34:57 SkyScan query 09:34:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:34:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:34:57 Message to Master queued w/err=0: serial=112261 error=0 09:35:02 Received message from Master: op=Filter serial=112262 09:35:02 Color wheel filter change from 0 to 0 09:35:02 FLIGetFilterPos err=0 currentPosition=0 09:35:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:02 Filter is already there-color wheel unchanged 09:35:02 Received message from Master: op=Shutter serial=112263 09:35:02 Shutter LASER close 09:35:02 Received message from Camera: op=State serial=112265 09:35:02 GetSingleValue result=40 Value=cccccccc 09:35:02 SkyScan query 09:35:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:35:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:03 Parameters OK 09:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:03 Set A/D data flow result=40 09:35:03 Set A/D channel type result=40 09:35:03 Set A/D encoding result=40 09:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:03 Set channel filter=0.000000e+000 result=40 09:35:03 Config A/D Result=40 09:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:03 Get A/D filter: -9.255963e+061 result=40 09:35:03 Get A/D value=-858993460 result=40 09:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:03 Parameters OK 09:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:03 Set A/D data flow result=40 09:35:03 Set A/D channel type result=40 09:35:03 Set A/D encoding result=40 09:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:03 Set channel filter=0.000000e+000 result=40 09:35:03 Config A/D Result=40 09:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:03 Get A/D filter: -9.255963e+061 result=40 09:35:03 Get A/D value=-858993460 result=40 09:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:03 Aux= 09:35:03 Message to Camera, serial 112265 queued 09:35:40 Received message from Master: op=PointingHead serial=112278 09:35:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:35:40 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:35:40 Point started: ret=0 09:35:40 point_skyscan result=0 09:35:41 Check angles 09:35:41 SkyScan query 09:35:42 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 09:35:42 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 09:35:42 Check angles [UTC 2018-12-13 09:35:42] 09:35:42 SkyScan query 09:35:42 SkyScan query done: ret=0 az=127.59<-8506 ze=38.505<-9433 Statuses=0009 0008 09:35:42 Msec=750 True Az=127.59 Ze=38.505 Az status=0009 Ze status=0008 09:35:42 Check angles 09:35:42 SkyScan query 09:35:43 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 09:35:43 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 09:35:43 Check angles 09:35:43 SkyScan query 09:35:44 SkyScan query done: ret=0 az=161.1<-10740 ze=38.505<-9433 Statuses=0009 0008 09:35:44 Msec=2250 True Az=161.1 Ze=38.505 Az status=0009 Ze status=0008 09:35:44 Check angles 09:35:44 SkyScan query 09:35:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:35:45 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:35:45 Check angles 09:35:45 SkyScan query 09:35:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:35:45 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:35:45 Message to Master queued w/err=0: serial=112278 error=0 09:35:50 Received message from Master: op=Filter serial=112279 09:35:50 Color wheel filter change from 0 to 0 09:35:50 FLIGetFilterPos err=0 currentPosition=0 09:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:50 Filter is already there-color wheel unchanged 09:35:50 Received message from Master: op=Shutter serial=112280 09:35:50 Shutter LASER close 09:35:50 Received message from Camera: op=State serial=112282 09:35:50 GetSingleValue result=40 Value=cccccccc 09:35:50 SkyScan query 09:35:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:51 Parameters OK 09:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:51 Set A/D data flow result=40 09:35:51 Set A/D channel type result=40 09:35:51 Set A/D encoding result=40 09:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:51 Set channel filter=0.000000e+000 result=40 09:35:51 Config A/D Result=40 09:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:51 Get A/D filter: -9.255963e+061 result=40 09:35:51 Get A/D value=-858993460 result=40 09:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:51 Parameters OK 09:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:51 Set A/D data flow result=40 09:35:51 Set A/D channel type result=40 09:35:51 Set A/D encoding result=40 09:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:51 Set channel filter=0.000000e+000 result=40 09:35:51 Config A/D Result=40 09:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:51 Get A/D filter: -9.255963e+061 result=40 09:35:51 Get A/D value=-858993460 result=40 09:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:51 Aux= 09:35:51 Message to Camera, serial 112282 queued [UTC 2018-12-13 09:35:52] 09:36:28 Received message from Master: op=PointingHead serial=112295 09:36:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:36:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:36:28 Point started: ret=0 09:36:28 point_skyscan result=0 09:36:29 Check angles 09:36:29 SkyScan query 09:36:30 SkyScan query done: ret=0 az=153.105<-10207 ze=9<-11400 Statuses=0009 0009 09:36:30 Msec=0 True Az=153.105 Ze=9 Az status=0009 Ze status=0009 09:36:30 Check angles 09:36:30 SkyScan query 09:36:30 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.45<-12830 Statuses=0009 0009 09:36:30 Msec=750 True Az=135.285 Ze=-12.45 Az status=0009 Ze status=0009 09:36:31 Check angles 09:36:31 SkyScan query 09:36:31 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.345<-14223 Statuses=0009 0009 09:36:31 Msec=1500 True Az=117.78 Ze=-33.345 Az status=0009 Ze status=0009 09:36:31 Check angles 09:36:31 SkyScan query 09:36:32 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.54<-15436 Statuses=0009 0009 09:36:32 Msec=2250 True Az=100.365 Ze=-51.54 Az status=0009 Ze status=0009 09:36:32 Check angles 09:36:32 SkyScan query 09:36:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 09:36:33 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 09:36:33 Check angles 09:36:33 SkyScan query 09:36:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:36:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:36:33 Message to Master queued w/err=0: serial=112295 error=0 09:36:38 Received message from Master: op=Filter serial=112296 09:36:38 Color wheel filter change from 0 to 0 09:36:38 FLIGetFilterPos err=0 currentPosition=0 09:36:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:38 Filter is already there-color wheel unchanged 09:36:39 Received message from Master: op=Shutter serial=112297 09:36:39 Shutter LASER close 09:36:39 Received message from Camera: op=State serial=112299 09:36:39 GetSingleValue result=40 Value=cccccccc 09:36:39 SkyScan query 09:36:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:36:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:39 Parameters OK 09:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:39 Set A/D data flow result=40 09:36:39 Set A/D channel type result=40 09:36:39 Set A/D encoding result=40 09:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:39 Set channel filter=0.000000e+000 result=40 09:36:39 Config A/D Result=40 09:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:39 Get A/D filter: -9.255963e+061 result=40 09:36:39 Get A/D value=-858993460 result=40 09:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:39 Parameters OK 09:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:39 Set A/D data flow result=40 09:36:39 Set A/D channel type result=40 09:36:39 Set A/D encoding result=40 09:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:39 Set channel filter=0.000000e+000 result=40 09:36:39 Config A/D Result=40 09:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:39 Get A/D filter: -9.255963e+061 result=40 09:36:39 Get A/D value=-858993460 result=40 09:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:39 Aux= 09:36:39 Message to Camera, serial 112299 queued 09:37:16 Received message from Master: op=PointingHead serial=112312 09:37:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:37:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:37:16 Point started: ret=0 09:37:16 point_skyscan result=0 09:37:17 Check angles 09:37:17 SkyScan query 09:37:18 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.6<-17440 Statuses=0009 0009 09:37:18 Msec=0 True Az=109.365 Ze=-81.6 Az status=0009 Ze status=0009 09:37:18 Check angles 09:37:18 SkyScan query 09:37:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 09:37:18 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 09:37:19 Check angles 09:37:19 SkyScan query 09:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 09:37:19 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 09:37:19 Check angles 09:37:19 SkyScan query 09:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.32<-21688 Statuses=0008 0009 09:37:20 Msec=2250 True Az=112.995 Ze=-145.32 Az status=0008 Ze status=0009 09:37:20 Check angles 09:37:20 SkyScan query 09:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.725<-23115 Statuses=0008 0009 09:37:21 Msec=3000 True Az=112.995 Ze=-166.725 Az status=0008 Ze status=0009 09:37:21 Check angles 09:37:21 SkyScan query 09:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:37:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:37:21 Message to Master queued w/err=0: serial=112312 error=0 09:37:26 Received message from Master: op=Filter serial=112313 09:37:26 Color wheel filter change from 0 to 0 09:37:26 FLIGetFilterPos err=0 currentPosition=0 09:37:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:26 Filter is already there-color wheel unchanged 09:37:27 Received message from Master: op=Shutter serial=112314 09:37:27 Shutter LASER open 09:37:27 Received message from Camera: op=State serial=112316 09:37:27 GetSingleValue result=40 Value=cccccccc 09:37:27 SkyScan query 09:37:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:37:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:27 Parameters OK 09:37:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:27 Set A/D data flow result=40 09:37:27 Set A/D channel type result=40 09:37:27 Set A/D encoding result=40 09:37:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:27 Set channel filter=0.000000e+000 result=40 09:37:27 Config A/D Result=40 09:37:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:27 Get A/D filter: -9.255963e+061 result=40 09:37:27 Get A/D value=-858993460 result=40 09:37:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:27 Parameters OK 09:37:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:27 Set A/D data flow result=40 09:37:27 Set A/D channel type result=40 09:37:27 Set A/D encoding result=40 09:37:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:27 Set channel filter=0.000000e+000 result=40 09:37:27 Config A/D Result=40 09:37:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:27 Get A/D filter: -9.255963e+061 result=40 09:37:27 Get A/D value=-858993460 result=40 09:37:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:27 Aux= 09:37:27 Message to Camera, serial 112316 queued 09:37:36 Received message from Master: op=Shutter serial=112326 09:37:36 Shutter LASER close 09:37:36 Received message from Master: op=PointingHead serial=112330 09:37:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:37:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:37:37 Point started: ret=0 09:37:37 point_skyscan result=0 09:37:37 Check angles 09:37:37 SkyScan query 09:37:38 SkyScan query done: ret=0 az=89.82<-5988 ze=157.155<-1523 Statuses=0009 0009 09:37:38 Msec=0 True Az=89.82 Ze=157.155 Az status=0009 Ze status=0009 09:37:38 Check angles 09:37:38 SkyScan query 09:37:39 SkyScan query done: ret=0 az=71.925<-4795 ze=135.75<-2950 Statuses=0009 0009 09:37:39 Msec=750 True Az=71.925 Ze=135.75 Az status=0009 Ze status=0009 09:37:39 Check angles 09:37:39 SkyScan query 09:37:39 SkyScan query done: ret=0 az=54.36<-3624 ze=114.315<-4379 Statuses=0009 0009 09:37:39 Msec=1500 True Az=54.36 Ze=114.315 Az status=0009 Ze status=0009 09:37:40 Check angles 09:37:40 SkyScan query 09:37:40 SkyScan query done: ret=0 az=40.95<-2730 ze=93.42<-5772 Statuses=0009 0009 09:37:40 Msec=2250 True Az=40.95 Ze=93.42 Az status=0009 Ze status=0009 09:37:40 Check angles 09:37:40 SkyScan query 09:37:41 SkyScan query done: ret=0 az=40.995<-2733 ze=72.45<-7170 Statuses=0008 0009 09:37:41 Msec=3000 True Az=40.995 Ze=72.45 Az status=0008 Ze status=0009 09:37:41 Check angles 09:37:41 SkyScan query 09:37:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 09:37:42 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 09:37:42 Check angles 09:37:42 SkyScan query 09:37:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:37:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:37:42 Message to Master queued w/err=0: serial=112330 error=0 09:37:47 Received message from Master: op=Filter serial=112331 09:37:47 Color wheel filter change from 0 to 0 09:37:47 FLIGetFilterPos err=0 currentPosition=0 09:37:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:47 Filter is already there-color wheel unchanged 09:37:48 Received message from Master: op=Shutter serial=112332 09:37:48 Shutter LASER close 09:37:48 Received message from Camera: op=State serial=112334 09:37:48 GetSingleValue result=40 Value=cccccccc 09:37:48 SkyScan query 09:37:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:37:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:48 Parameters OK 09:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:48 Set A/D data flow result=40 09:37:48 Set A/D channel type result=40 09:37:48 Set A/D encoding result=40 09:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:48 Set channel filter=0.000000e+000 result=40 09:37:48 Config A/D Result=40 09:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:48 Get A/D filter: -9.255963e+061 result=40 09:37:48 Get A/D value=-858993460 result=40 09:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:48 Parameters OK 09:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:48 Set A/D data flow result=40 09:37:48 Set A/D channel type result=40 09:37:48 Set A/D encoding result=40 09:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:48 Set channel filter=0.000000e+000 result=40 09:37:48 Config A/D Result=40 09:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:48 Get A/D filter: -9.255963e+061 result=40 09:37:48 Get A/D value=-858993460 result=40 09:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:48 Aux= 09:37:48 Message to Camera, serial 112334 queued 09:38:25 Received message from Master: op=PointingHead serial=112347 09:38:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:38:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:38:26 Point started: ret=0 09:38:26 point_skyscan result=0 09:38:26 Check angles 09:38:26 SkyScan query 09:38:27 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 09:38:27 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 09:38:27 Check angles 09:38:27 SkyScan query 09:38:28 SkyScan query done: ret=0 az=82.02<-5468 ze=66.495<-7567 Statuses=0009 0008 09:38:28 Msec=750 True Az=82.02 Ze=66.495 Az status=0009 Ze status=0008 09:38:28 Check angles 09:38:28 SkyScan query 09:38:28 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 09:38:28 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 09:38:29 Check angles 09:38:29 SkyScan query 09:38:29 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 09:38:29 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 09:38:29 Check angles 09:38:29 SkyScan query 09:38:30 SkyScan query done: ret=0 az=134.865<-8991 ze=66.495<-7567 Statuses=0009 0008 09:38:30 Msec=3000 True Az=134.865 Ze=66.495 Az status=0009 Ze status=0008 09:38:30 Check angles 09:38:30 SkyScan query 09:38:31 SkyScan query done: ret=0 az=152.685<-10179 ze=66.495<-7567 Statuses=0009 0008 09:38:31 Msec=3750 True Az=152.685 Ze=66.495 Az status=0009 Ze status=0008 09:38:31 Check angles 09:38:31 SkyScan query 09:38:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:38:31 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 09:38:31 Message to Master queued w/err=0: serial=112347 error=0 09:38:36 Received message from Master: op=Filter serial=112348 09:38:36 Color wheel filter change from 0 to 0 09:38:36 FLIGetFilterPos err=0 currentPosition=0 09:38:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:36 Filter is already there-color wheel unchanged 09:38:37 Received message from Master: op=Shutter serial=112349 09:38:37 Shutter LASER close 09:38:37 Received message from Camera: op=State serial=112351 09:38:37 GetSingleValue result=40 Value=cccccccc 09:38:37 SkyScan query 09:38:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:38:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:37 Parameters OK 09:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:37 Set A/D data flow result=40 09:38:37 Set A/D channel type result=40 09:38:37 Set A/D encoding result=40 09:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:37 Set channel filter=0.000000e+000 result=40 09:38:37 Config A/D Result=40 09:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:37 Get A/D filter: -9.255963e+061 result=40 09:38:37 Get A/D value=-858993460 result=40 09:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:37 Parameters OK 09:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:37 Set A/D data flow result=40 09:38:37 Set A/D channel type result=40 09:38:37 Set A/D encoding result=40 09:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:37 Set channel filter=0.000000e+000 result=40 09:38:37 Config A/D Result=40 09:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:37 Get A/D filter: -9.255963e+061 result=40 09:38:37 Get A/D value=-858993460 result=40 09:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:37 Aux= 09:38:37 Message to Camera, serial 112351 queued 09:39:13 Received message from Master: op=PointingHead serial=112363 09:39:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:39:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:39:14 Point started: ret=0 09:39:14 point_skyscan result=0 09:39:14 Check angles 09:39:14 SkyScan query 09:39:15 SkyScan query done: ret=0 az=134.82<-8988 ze=36.6<-9560 Statuses=0009 0009 09:39:15 Msec=0 True Az=134.82 Ze=36.6 Az status=0009 Ze status=0009 09:39:15 Check angles 09:39:15 SkyScan query 09:39:16 SkyScan query done: ret=0 az=117.27<-7818 ze=15.66<-10956 Statuses=0009 0009 09:39:16 Msec=750 True Az=117.27 Ze=15.66 Az status=0009 Ze status=0009 09:39:16 Check angles 09:39:16 SkyScan query 09:39:16 SkyScan query done: ret=0 az=100.035<-6669 ze=-5.325<-12355 Statuses=0009 0009 09:39:16 Msec=1500 True Az=100.035 Ze=-5.325 Az status=0009 Ze status=0009 09:39:17 Check angles 09:39:17 SkyScan query 09:39:17 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.265<-13751 Statuses=0009 0009 09:39:17 Msec=2250 True Az=82.44 Ze=-26.265 Az status=0009 Ze status=0009 09:39:17 Check angles 09:39:17 SkyScan query 09:39:18 SkyScan query done: ret=0 az=65.07<-4338 ze=-38.565<-14571 Statuses=0009 0008 09:39:18 Msec=3000 True Az=65.07 Ze=-38.565 Az status=0009 Ze status=0008 09:39:18 Check angles 09:39:18 SkyScan query 09:39:19 SkyScan query done: ret=0 az=47.595<-3173 ze=-38.535<-14569 Statuses=0009 0008 09:39:19 Msec=3750 True Az=47.595 Ze=-38.535 Az status=0009 Ze status=0008 09:39:19 Check angles 09:39:19 SkyScan query 09:39:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:39:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:39:19 Message to Master queued w/err=0: serial=112363 error=0 09:39:24 Received message from Master: op=Filter serial=112364 09:39:24 Color wheel filter change from 0 to 0 09:39:24 FLIGetFilterPos err=0 currentPosition=0 09:39:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:24 Filter is already there-color wheel unchanged 09:39:25 Received message from Master: op=Shutter serial=112365 09:39:25 Shutter LASER close 09:39:25 Received message from Camera: op=State serial=112367 09:39:25 GetSingleValue result=40 Value=cccccccc 09:39:25 SkyScan query 09:39:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:39:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:25 Parameters OK 09:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:25 Set A/D data flow result=40 09:39:25 Set A/D channel type result=40 09:39:25 Set A/D encoding result=40 09:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:25 Set channel filter=0.000000e+000 result=40 09:39:25 Config A/D Result=40 09:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:25 Get A/D filter: -9.255963e+061 result=40 09:39:25 Get A/D value=-858993460 result=40 09:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:25 Parameters OK 09:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:25 Set A/D data flow result=40 09:39:25 Set A/D channel type result=40 09:39:25 Set A/D encoding result=40 09:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:25 Set channel filter=0.000000e+000 result=40 09:39:25 Config A/D Result=40 09:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:25 Get A/D filter: -9.255963e+061 result=40 09:39:25 Get A/D value=-858993460 result=40 09:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:25 Aux= 09:39:25 Message to Camera, serial 112367 queued 09:40:02 Received message from Master: op=PointingHead serial=112380 09:40:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:40:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:40:02 Point started: ret=0 09:40:02 point_skyscan result=0 09:40:03 Check angles 09:40:03 SkyScan query 09:40:04 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.22<-16548 Statuses=0009 0009 09:40:04 Msec=0 True Az=64.02 Ze=-68.22 Az status=0009 Ze status=0009 09:40:04 Check angles 09:40:04 SkyScan query 09:40:04 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.205<-17947 Statuses=0009 0009 09:40:04 Msec=750 True Az=81.375 Ze=-89.205 Az status=0009 Ze status=0009 09:40:05 Check angles 09:40:05 SkyScan query 09:40:05 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.145<-19343 Statuses=0009 0009 09:40:05 Msec=1500 True Az=98.85 Ze=-110.145 Az status=0009 Ze status=0009 09:40:05 Check angles 09:40:05 SkyScan query 09:40:06 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.115<-20741 Statuses=0009 0009 09:40:06 Msec=2250 True Az=116.445 Ze=-131.115 Az status=0009 Ze status=0009 09:40:06 Check angles 09:40:06 SkyScan query 09:40:07 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 09:40:07 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 09:40:07 Check angles 09:40:07 SkyScan query 09:40:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:40:07 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:40:07 Message to Master queued w/err=0: serial=112380 error=0 09:40:12 Received message from Master: op=Filter serial=112381 09:40:12 Color wheel filter change from 0 to 0 09:40:12 FLIGetFilterPos err=0 currentPosition=0 09:40:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:12 Filter is already there-color wheel unchanged 09:40:13 Received message from Master: op=Shutter serial=112382 09:40:13 Shutter LASER close 09:40:13 Received message from Camera: op=State serial=112384 09:40:13 GetSingleValue result=40 Value=cccccccc 09:40:13 SkyScan query 09:40:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:40:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:13 Parameters OK 09:40:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:13 Set A/D data flow result=40 09:40:13 Set A/D channel type result=40 09:40:13 Set A/D encoding result=40 09:40:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:13 Set channel filter=0.000000e+000 result=40 09:40:13 Config A/D Result=40 09:40:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:13 Get A/D filter: -9.255963e+061 result=40 09:40:13 Get A/D value=-858993460 result=40 09:40:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:13 Parameters OK 09:40:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:13 Set A/D data flow result=40 09:40:13 Set A/D channel type result=40 09:40:13 Set A/D encoding result=40 09:40:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:13 Set channel filter=0.000000e+000 result=40 09:40:13 Config A/D Result=40 09:40:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:13 Get A/D filter: -9.255963e+061 result=40 09:40:13 Get A/D value=-858993460 result=40 09:40:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:13 Aux= 09:40:13 Message to Camera, serial 112384 queued 09:40:50 Received message from Master: op=PointingHead serial=112397 09:40:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:40:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:40:50 Point started: ret=0 09:40:50 point_skyscan result=0 09:40:51 Check angles 09:40:51 SkyScan query 09:40:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 09:40:52 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 09:40:52 Check angles 09:40:52 SkyScan query 09:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:40:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:40:53 Message to Master queued w/err=0: serial=112397 error=0 09:40:58 Received message from Master: op=Filter serial=112398 09:40:58 Color wheel filter change from 0 to 0 09:40:58 FLIGetFilterPos err=0 currentPosition=0 09:40:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:58 Filter is already there-color wheel unchanged 09:40:58 Received message from Master: op=Shutter serial=112399 09:40:58 Shutter LASER open 09:40:58 Received message from Camera: op=State serial=112401 09:40:58 GetSingleValue result=40 Value=cccccccc 09:40:58 SkyScan query 09:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:40:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:58 Parameters OK 09:40:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:58 Set A/D data flow result=40 09:40:58 Set A/D channel type result=40 09:40:58 Set A/D encoding result=40 09:40:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:58 Set channel filter=0.000000e+000 result=40 09:40:58 Config A/D Result=40 09:40:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:58 Get A/D filter: -9.255963e+061 result=40 09:40:58 Get A/D value=-858993460 result=40 09:40:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:58 Parameters OK 09:40:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:58 Set A/D data flow result=40 09:40:58 Set A/D channel type result=40 09:40:58 Set A/D encoding result=40 09:40:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:58 Set channel filter=0.000000e+000 result=40 09:40:58 Config A/D Result=40 09:40:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:58 Get A/D filter: -9.255963e+061 result=40 09:40:58 Get A/D value=-858993460 result=40 09:40:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:58 Aux= 09:40:58 Message to Camera, serial 112401 queued 09:41:07 Received message from Master: op=Shutter serial=112411 09:41:07 Shutter LASER close 09:41:07 Received message from Master: op=PointingHead serial=112415 09:41:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:41:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:41:08 Point started: ret=0 09:41:08 point_skyscan result=0 09:41:09 Check angles 09:41:09 SkyScan query 09:41:09 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.46<-21564 Statuses=0009 0009 09:41:09 Msec=0 True Az=135.84 Ze=-143.46 Az status=0009 Ze status=0009 09:41:09 Check angles 09:41:09 SkyScan query 09:41:10 SkyScan query done: ret=0 az=153.615<-10241 ze=-121.98<-20132 Statuses=0009 0009 09:41:10 Msec=750 True Az=153.615 Ze=-121.98 Az status=0009 Ze status=0009 09:41:10 Check angles 09:41:10 SkyScan query 09:41:11 SkyScan query done: ret=0 az=171.285<-11419 ze=-101.085<-18739 Statuses=0009 0009 09:41:11 Msec=1500 True Az=171.285 Ze=-101.085 Az status=0009 Ze status=0009 09:41:11 Check angles 09:41:11 SkyScan query 09:41:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.13<-17342 Statuses=0008 0009 09:41:11 Msec=2250 True Az=176.01 Ze=-80.13 Az status=0008 Ze status=0009 09:41:12 Check angles 09:41:12 SkyScan query 09:41:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.145<-15943 Statuses=0008 0009 09:41:12 Msec=3000 True Az=176.01 Ze=-59.145 Az status=0008 Ze status=0009 09:41:12 Check angles 09:41:12 SkyScan query 09:41:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 09:41:13 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 09:41:13 Message to Master queued w/err=0: serial=112415 error=0 09:41:18 Received message from Master: op=Filter serial=112416 09:41:18 Color wheel filter change from 0 to 0 09:41:18 FLIGetFilterPos err=0 currentPosition=0 09:41:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:18 Filter is already there-color wheel unchanged 09:41:18 Received message from Master: op=Shutter serial=112417 09:41:18 Shutter LASER close 09:41:18 Received message from Camera: op=State serial=112419 09:41:18 GetSingleValue result=40 Value=cccccccc 09:41:18 SkyScan query 09:41:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:41:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:19 Parameters OK 09:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:19 Set A/D data flow result=40 09:41:19 Set A/D channel type result=40 09:41:19 Set A/D encoding result=40 09:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:19 Set channel filter=0.000000e+000 result=40 09:41:19 Config A/D Result=40 09:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:19 Get A/D filter: -9.255963e+061 result=40 09:41:19 Get A/D value=-858993460 result=40 09:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:19 Parameters OK 09:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:19 Set A/D data flow result=40 09:41:19 Set A/D channel type result=40 09:41:19 Set A/D encoding result=40 09:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:19 Set channel filter=0.000000e+000 result=40 09:41:19 Config A/D Result=40 09:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:19 Get A/D filter: -9.255963e+061 result=40 09:41:19 Get A/D value=-858993460 result=40 09:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:19 Aux= 09:41:19 Message to Camera, serial 112419 queued 09:41:56 Received message from Master: op=PointingHead serial=112432 09:41:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:41:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:41:56 Point started: ret=0 09:41:56 point_skyscan result=0 09:41:57 Check angles 09:41:57 SkyScan query 09:41:57 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.465<-13431 Statuses=0009 0009 09:41:57 Msec=0 True Az=152.76 Ze=-21.465 Az status=0009 Ze status=0009 09:41:57 Check angles 09:41:57 SkyScan query 09:41:58 SkyScan query done: ret=0 az=135.33<-9022 ze=-0.465<-12031 Statuses=0009 0009 09:41:58 Msec=750 True Az=135.33 Ze=-0.465 Az status=0009 Ze status=0009 09:41:58 Check angles 09:41:58 SkyScan query 09:41:59 SkyScan query done: ret=0 az=117.78<-7852 ze=20.445<-10637 Statuses=0009 0009 09:41:59 Msec=1500 True Az=117.78 Ze=20.445 Az status=0009 Ze status=0009 09:41:59 Check angles 09:41:59 SkyScan query 09:42:00 SkyScan query done: ret=0 az=100.05<-6670 ze=41.85<-9210 Statuses=0009 0009 09:42:00 Msec=2250 True Az=100.05 Ze=41.85 Az status=0009 Ze status=0009 09:42:00 Check angles 09:42:00 SkyScan query 09:42:00 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:42:00 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:42:00 Check angles 09:42:00 SkyScan query 09:42:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:42:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:42:01 Message to Master queued w/err=0: serial=112432 error=0 09:42:06 Received message from Master: op=Filter serial=112433 09:42:06 Color wheel filter change from 0 to 0 09:42:06 FLIGetFilterPos err=0 currentPosition=0 09:42:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:06 Filter is already there-color wheel unchanged 09:42:06 Received message from Master: op=Shutter serial=112434 09:42:06 Shutter LASER close 09:42:06 Received message from Camera: op=State serial=112436 09:42:06 GetSingleValue result=40 Value=cccccccc 09:42:06 SkyScan query 09:42:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:42:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:07 Parameters OK 09:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:07 Set A/D data flow result=40 09:42:07 Set A/D channel type result=40 09:42:07 Set A/D encoding result=40 09:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:07 Set channel filter=0.000000e+000 result=40 09:42:07 Config A/D Result=40 09:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:07 Get A/D filter: -9.255963e+061 result=40 09:42:07 Get A/D value=-858993460 result=40 09:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:07 Parameters OK 09:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:07 Set A/D data flow result=40 09:42:07 Set A/D channel type result=40 09:42:07 Set A/D encoding result=40 09:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:07 Set channel filter=0.000000e+000 result=40 09:42:07 Config A/D Result=40 09:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:07 Get A/D filter: -9.255963e+061 result=40 09:42:07 Get A/D value=-858993460 result=40 09:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:07 Aux= 09:42:07 Message to Camera, serial 112436 queued 09:42:44 Received message from Master: op=PointingHead serial=112449 09:42:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:42:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:42:44 Point started: ret=0 09:42:44 point_skyscan result=0 09:42:45 Check angles 09:42:45 SkyScan query 09:42:45 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 09:42:45 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 09:42:46 Check angles 09:42:46 SkyScan query 09:42:46 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 09:42:46 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 09:42:46 Check angles 09:42:46 SkyScan query 09:42:47 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 09:42:47 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 09:42:47 Check angles 09:42:47 SkyScan query 09:42:48 SkyScan query done: ret=0 az=162.195<-10813 ze=38.505<-9433 Statuses=0009 0008 09:42:48 Msec=2250 True Az=162.195 Ze=38.505 Az status=0009 Ze status=0008 09:42:48 Check angles 09:42:48 SkyScan query 09:42:48 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:42:48 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:42:49 Check angles 09:42:49 SkyScan query 09:42:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:42:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:42:49 Message to Master queued w/err=0: serial=112449 error=0 09:42:54 Received message from Master: op=Filter serial=112450 09:42:54 Color wheel filter change from 0 to 0 09:42:54 FLIGetFilterPos err=0 currentPosition=0 09:42:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:54 Filter is already there-color wheel unchanged 09:42:54 Received message from Master: op=Shutter serial=112451 09:42:54 Shutter LASER close 09:42:54 Received message from Camera: op=State serial=112453 09:42:54 GetSingleValue result=40 Value=cccccccc 09:42:54 SkyScan query 09:42:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:42:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:55 Parameters OK 09:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:55 Set A/D data flow result=40 09:42:55 Set A/D channel type result=40 09:42:55 Set A/D encoding result=40 09:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:55 Set channel filter=0.000000e+000 result=40 09:42:55 Config A/D Result=40 09:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:55 Get A/D filter: -9.255963e+061 result=40 09:42:55 Get A/D value=-858993460 result=40 09:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:55 Parameters OK 09:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:55 Set A/D data flow result=40 09:42:55 Set A/D channel type result=40 09:42:55 Set A/D encoding result=40 09:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:55 Set channel filter=0.000000e+000 result=40 09:42:55 Config A/D Result=40 09:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:55 Get A/D filter: -9.255963e+061 result=40 09:42:55 Get A/D value=-858993460 result=40 09:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:55 Aux= 09:42:55 Message to Camera, serial 112453 queued 09:43:32 Received message from Master: op=PointingHead serial=112466 09:43:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:43:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:43:32 Point started: ret=0 09:43:32 point_skyscan result=0 09:43:33 Check angles 09:43:33 SkyScan query 09:43:34 SkyScan query done: ret=0 az=152.97<-10198 ze=8.88<-11408 Statuses=0009 0009 09:43:34 Msec=0 True Az=152.97 Ze=8.88 Az status=0009 Ze status=0009 09:43:34 Check angles 09:43:34 SkyScan query 09:43:34 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.09<-12806 Statuses=0009 0009 09:43:34 Msec=750 True Az=135.6 Ze=-12.09 Az status=0009 Ze status=0009 09:43:35 Check angles 09:43:35 SkyScan query 09:43:35 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.45<-14230 Statuses=0009 0009 09:43:35 Msec=1500 True Az=117.6 Ze=-33.45 Az status=0009 Ze status=0009 09:43:35 Check angles 09:43:35 SkyScan query 09:43:36 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 09:43:36 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 09:43:36 Check angles 09:43:36 SkyScan query 09:43:37 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:43:37 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:43:37 Check angles 09:43:37 SkyScan query 09:43:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:43:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:43:37 Message to Master queued w/err=0: serial=112466 error=0 09:43:42 Received message from Master: op=Filter serial=112467 09:43:42 Color wheel filter change from 0 to 0 09:43:42 FLIGetFilterPos err=0 currentPosition=0 09:43:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:42 Filter is already there-color wheel unchanged 09:43:43 Received message from Master: op=Shutter serial=112468 09:43:43 Shutter LASER close 09:43:43 Received message from Camera: op=State serial=112470 09:43:43 GetSingleValue result=40 Value=cccccccc 09:43:43 SkyScan query 09:43:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:43:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:43 Parameters OK 09:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:43 Set A/D data flow result=40 09:43:43 Set A/D channel type result=40 09:43:43 Set A/D encoding result=40 09:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:43 Set channel filter=0.000000e+000 result=40 09:43:43 Config A/D Result=40 09:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:43 Get A/D filter: -9.255963e+061 result=40 09:43:43 Get A/D value=-858993460 result=40 09:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:43 Parameters OK 09:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:43 Set A/D data flow result=40 09:43:43 Set A/D channel type result=40 09:43:43 Set A/D encoding result=40 09:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:43 Set channel filter=0.000000e+000 result=40 09:43:43 Config A/D Result=40 09:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:43 Get A/D filter: -9.255963e+061 result=40 09:43:43 Get A/D value=-858993460 result=40 09:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:43 Aux= 09:43:43 Message to Camera, serial 112470 queued 09:44:20 Received message from Master: op=PointingHead serial=112483 09:44:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:44:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:44:20 Point started: ret=0 09:44:20 point_skyscan result=0 09:44:21 Check angles 09:44:21 SkyScan query 09:44:22 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.315<-17421 Statuses=0009 0009 09:44:22 Msec=0 True Az=109.14 Ze=-81.315 Az status=0009 Ze status=0009 09:44:22 Check angles 09:44:22 SkyScan query 09:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 09:44:22 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 09:44:23 Check angles 09:44:23 SkyScan query 09:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 09:44:23 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 09:44:23 Check angles 09:44:23 SkyScan query 09:44:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.02<-21668 Statuses=0008 0009 09:44:24 Msec=2250 True Az=112.995 Ze=-145.02 Az status=0008 Ze status=0009 09:44:24 Check angles 09:44:24 SkyScan query 09:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.96<-23064 Statuses=0008 0009 09:44:25 Msec=3000 True Az=112.995 Ze=-165.96 Az status=0008 Ze status=0009 09:44:25 Check angles 09:44:25 SkyScan query 09:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:44:25 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:44:25 Message to Master queued w/err=0: serial=112483 error=0 09:44:30 Received message from Master: op=Filter serial=112484 09:44:30 Color wheel filter change from 0 to 0 09:44:30 FLIGetFilterPos err=0 currentPosition=0 09:44:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:30 Filter is already there-color wheel unchanged 09:44:31 Received message from Master: op=Shutter serial=112485 09:44:31 Shutter LASER open 09:44:31 Received message from Camera: op=State serial=112487 09:44:31 GetSingleValue result=40 Value=cccccccc 09:44:31 SkyScan query 09:44:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:44:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:31 Parameters OK 09:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:31 Set A/D data flow result=40 09:44:31 Set A/D channel type result=40 09:44:31 Set A/D encoding result=40 09:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:31 Set channel filter=0.000000e+000 result=40 09:44:31 Config A/D Result=40 09:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:31 Get A/D filter: -9.255963e+061 result=40 09:44:31 Get A/D value=-858993460 result=40 09:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:31 Parameters OK 09:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:31 Set A/D data flow result=40 09:44:31 Set A/D channel type result=40 09:44:31 Set A/D encoding result=40 09:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:31 Set channel filter=0.000000e+000 result=40 09:44:31 Config A/D Result=40 09:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:31 Get A/D filter: -9.255963e+061 result=40 09:44:31 Get A/D value=-858993460 result=40 09:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:31 Aux= 09:44:31 Message to Camera, serial 112487 queued 09:44:40 Received message from Master: op=Shutter serial=112497 09:44:40 Shutter LASER close 09:44:40 Received message from Master: op=PointingHead serial=112501 09:44:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:44:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:44:41 Point started: ret=0 09:44:41 point_skyscan result=0 09:44:41 Check angles 09:44:41 SkyScan query 09:44:42 SkyScan query done: ret=0 az=90.15<-6010 ze=157.485<-1501 Statuses=0009 0009 09:44:42 Msec=0 True Az=90.15 Ze=157.485 Az status=0009 Ze status=0009 09:44:42 Check angles 09:44:42 SkyScan query 09:44:43 SkyScan query done: ret=0 az=72.72<-4848 ze=136.485<-2901 Statuses=0009 0009 09:44:43 Msec=750 True Az=72.72 Ze=136.485 Az status=0009 Ze status=0009 09:44:43 Check angles 09:44:43 SkyScan query 09:44:43 SkyScan query done: ret=0 az=55.2<-3680 ze=115.59<-4294 Statuses=0009 0009 09:44:43 Msec=1500 True Az=55.2 Ze=115.59 Az status=0009 Ze status=0009 09:44:44 Check angles 09:44:44 SkyScan query 09:44:44 SkyScan query done: ret=0 az=40.935<-2729 ze=94.59<-5694 Statuses=0009 0009 09:44:44 Msec=2250 True Az=40.935 Ze=94.59 Az status=0009 Ze status=0009 09:44:44 Check angles 09:44:44 SkyScan query 09:44:45 SkyScan query done: ret=0 az=40.995<-2733 ze=73.68<-7088 Statuses=0008 0009 09:44:45 Msec=3000 True Az=40.995 Ze=73.68 Az status=0008 Ze status=0009 09:44:45 Check angles 09:44:45 SkyScan query 09:44:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.98<-8468 Statuses=0008 0009 09:44:46 Msec=3750 True Az=40.995 Ze=52.98 Az status=0008 Ze status=0009 09:44:46 Check angles 09:44:46 SkyScan query 09:44:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:44:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:44:46 Message to Master queued w/err=0: serial=112501 error=0 09:44:51 Received message from Master: op=Filter serial=112502 09:44:51 Color wheel filter change from 0 to 0 09:44:51 FLIGetFilterPos err=0 currentPosition=0 09:44:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:51 Filter is already there-color wheel unchanged 09:44:52 Received message from Master: op=Shutter serial=112503 09:44:52 Shutter LASER close 09:44:52 Received message from Camera: op=State serial=112505 09:44:52 GetSingleValue result=40 Value=cccccccc 09:44:52 SkyScan query 09:44:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:44:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:52 Parameters OK 09:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:52 Set A/D data flow result=40 09:44:52 Set A/D channel type result=40 09:44:52 Set A/D encoding result=40 09:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:52 Set channel filter=0.000000e+000 result=40 09:44:52 Config A/D Result=40 09:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:52 Get A/D filter: -9.255963e+061 result=40 09:44:52 Get A/D value=-858993460 result=40 09:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:52 Parameters OK 09:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:52 Set A/D data flow result=40 09:44:52 Set A/D channel type result=40 09:44:52 Set A/D encoding result=40 09:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:52 Set channel filter=0.000000e+000 result=40 09:44:52 Config A/D Result=40 09:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:52 Get A/D filter: -9.255963e+061 result=40 09:44:52 Get A/D value=-858993460 result=40 09:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:52 Aux= 09:44:52 Message to Camera, serial 112505 queued 09:45:27 Received message from Master: op=Identify serial=112513 09:45:29 Received message from Master: op=PointingHead serial=112521 09:45:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:45:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:45:29 Point started: ret=0 09:45:29 point_skyscan result=0 09:45:30 Check angles 09:45:30 SkyScan query 09:45:31 SkyScan query done: ret=0 az=64.095<-4273 ze=66.555<-7563 Statuses=0009 0008 09:45:31 Msec=0 True Az=64.095 Ze=66.555 Az status=0009 Ze status=0008 09:45:31 Check angles 09:45:31 SkyScan query 09:45:32 SkyScan query done: ret=0 az=81.585<-5439 ze=66.51<-7566 Statuses=0009 0008 09:45:32 Msec=750 True Az=81.585 Ze=66.51 Az status=0009 Ze status=0008 09:45:32 Check angles 09:45:32 SkyScan query 09:45:32 SkyScan query done: ret=0 az=98.91<-6594 ze=66.495<-7567 Statuses=0009 0008 09:45:32 Msec=1500 True Az=98.91 Ze=66.495 Az status=0009 Ze status=0008 09:45:32 Check angles 09:45:32 SkyScan query 09:45:33 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 09:45:33 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 09:45:33 Check angles 09:45:33 SkyScan query 09:45:34 SkyScan query done: ret=0 az=133.98<-8932 ze=66.495<-7567 Statuses=0009 0008 09:45:34 Msec=3000 True Az=133.98 Ze=66.495 Az status=0009 Ze status=0008 09:45:34 Check angles 09:45:34 SkyScan query 09:45:35 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 09:45:35 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 09:45:35 Check angles 09:45:35 SkyScan query 09:45:35 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:45:35 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:45:35 Message to Master queued w/err=0: serial=112521 error=0 09:45:40 Received message from Master: op=Filter serial=112522 09:45:40 Color wheel filter change from 0 to 0 09:45:40 FLIGetFilterPos err=0 currentPosition=0 09:45:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:40 Filter is already there-color wheel unchanged 09:45:40 Received message from Master: op=Shutter serial=112523 09:45:40 Shutter LASER close 09:45:41 Received message from Camera: op=State serial=112525 09:45:41 GetSingleValue result=40 Value=cccccccc 09:45:41 SkyScan query 09:45:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:45:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:41 Parameters OK 09:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:41 Set A/D data flow result=40 09:45:41 Set A/D channel type result=40 09:45:41 Set A/D encoding result=40 09:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:41 Set channel filter=0.000000e+000 result=40 09:45:41 Config A/D Result=40 09:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:41 Get A/D filter: -9.255963e+061 result=40 09:45:41 Get A/D value=-858993460 result=40 09:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:41 Parameters OK 09:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:41 Set A/D data flow result=40 09:45:41 Set A/D channel type result=40 09:45:41 Set A/D encoding result=40 09:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:41 Set channel filter=0.000000e+000 result=40 09:45:41 Config A/D Result=40 09:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:41 Get A/D filter: -9.255963e+061 result=40 [UTC 2018-12-13 09:45:41] 09:45:41 Get A/D value=-858993460 result=40 09:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:41 Aux= 09:45:41 Message to Camera, serial 112525 queued 09:46:18 Received message from Master: op=PointingHead serial=112538 09:46:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:46:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:46:18 Point started: ret=0 09:46:18 point_skyscan result=0 09:46:19 Check angles 09:46:19 SkyScan query 09:46:20 SkyScan query done: ret=0 az=135.09<-9006 ze=36.945<-9537 Statuses=0009 0009 09:46:20 Msec=0 True Az=135.09 Ze=36.945 Az status=0009 Ze status=0009 09:46:20 Check angles 09:46:20 SkyScan query 09:46:20 SkyScan query done: ret=0 az=117.63<-7842 ze=15.96<-10936 Statuses=0009 0009 09:46:20 Msec=750 True Az=117.63 Ze=15.96 Az status=0009 Ze status=0009 09:46:21 Check angles 09:46:21 SkyScan query 09:46:21 SkyScan query done: ret=0 az=100.2<-6680 ze=-4.965<-12331 Statuses=0009 0009 09:46:21 Msec=1500 True Az=100.2 Ze=-4.965 Az status=0009 Ze status=0009 09:46:21 Check angles 09:46:21 SkyScan query 09:46:22 SkyScan query done: ret=0 az=82.68<-5512 ze=-25.92<-13728 Statuses=0009 0009 09:46:22 Msec=2250 True Az=82.68 Ze=-25.92 Az status=0009 Ze status=0009 09:46:22 Check angles 09:46:22 SkyScan query 09:46:23 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.58<-14572 Statuses=0009 0008 09:46:23 Msec=3000 True Az=64.815 Ze=-38.58 Az status=0009 Ze status=0008 09:46:23 Check angles 09:46:23 SkyScan query 09:46:23 SkyScan query done: ret=0 az=47.385<-3159 ze=-38.52<-14568 Statuses=0009 0008 09:46:23 Msec=3750 True Az=47.385 Ze=-38.52 Az status=0009 Ze status=0008 09:46:24 Check angles 09:46:24 SkyScan query 09:46:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:46:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:46:24 Message to Master queued w/err=0: serial=112538 error=0 09:46:29 Received message from Master: op=Filter serial=112539 09:46:29 Color wheel filter change from 0 to 0 09:46:29 FLIGetFilterPos err=0 currentPosition=0 09:46:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:29 Filter is already there-color wheel unchanged 09:46:29 Received message from Master: op=Shutter serial=112540 09:46:29 Shutter LASER close 09:46:29 Received message from Camera: op=State serial=112542 09:46:29 GetSingleValue result=40 Value=cccccccc 09:46:29 SkyScan query 09:46:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:46:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:30 Parameters OK 09:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:30 Set A/D data flow result=40 09:46:30 Set A/D channel type result=40 09:46:30 Set A/D encoding result=40 09:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:30 Set channel filter=0.000000e+000 result=40 09:46:30 Config A/D Result=40 09:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:30 Get A/D filter: -9.255963e+061 result=40 09:46:30 Get A/D value=-858993460 result=40 09:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:30 Parameters OK 09:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:30 Set A/D data flow result=40 09:46:30 Set A/D channel type result=40 09:46:30 Set A/D encoding result=40 09:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:30 Set channel filter=0.000000e+000 result=40 09:46:30 Config A/D Result=40 09:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:30 Get A/D filter: -9.255963e+061 result=40 09:46:30 Get A/D value=-858993460 result=40 09:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:30 Aux= 09:46:30 Message to Camera, serial 112542 queued 09:47:06 Received message from Master: op=PointingHead serial=112554 09:47:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:47:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:47:06 Point started: ret=0 09:47:06 point_skyscan result=0 09:47:07 Check angles 09:47:07 SkyScan query 09:47:07 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.265<-16551 Statuses=0009 0009 09:47:07 Msec=0 True Az=64.02 Ze=-68.265 Az status=0009 Ze status=0009 09:47:08 Check angles 09:47:08 SkyScan query 09:47:08 SkyScan query done: ret=0 az=81.42<-5428 ze=-89.25<-17950 Statuses=0009 0009 09:47:08 Msec=750 True Az=81.42 Ze=-89.25 Az status=0009 Ze status=0009 09:47:08 Check angles 09:47:08 SkyScan query 09:47:09 SkyScan query done: ret=0 az=98.835<-6589 ze=-110.19<-19346 Statuses=0009 0009 09:47:09 Msec=1500 True Az=98.835 Ze=-110.19 Az status=0009 Ze status=0009 09:47:09 Check angles 09:47:09 SkyScan query 09:47:10 SkyScan query done: ret=0 az=116.325<-7755 ze=-131.145<-20743 Statuses=0009 0009 09:47:10 Msec=2250 True Az=116.325 Ze=-131.145 Az status=0009 Ze status=0009 09:47:10 Check angles 09:47:10 SkyScan query 09:47:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 09:47:10 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 09:47:11 Check angles 09:47:11 SkyScan query 09:47:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:47:11 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:47:11 Message to Master queued w/err=0: serial=112554 error=0 09:47:16 Received message from Master: op=Filter serial=112555 09:47:16 Color wheel filter change from 0 to 0 09:47:16 FLIGetFilterPos err=0 currentPosition=0 09:47:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:16 Filter is already there-color wheel unchanged 09:47:16 Received message from Master: op=Shutter serial=112556 09:47:16 Shutter LASER close 09:47:16 Received message from Camera: op=State serial=112558 09:47:16 GetSingleValue result=40 Value=cccccccc 09:47:16 SkyScan query 09:47:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:47:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:17 Parameters OK 09:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:17 Set A/D data flow result=40 09:47:17 Set A/D channel type result=40 09:47:17 Set A/D encoding result=40 09:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:17 Set channel filter=0.000000e+000 result=40 09:47:17 Config A/D Result=40 09:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:17 Get A/D filter: -9.255963e+061 result=40 09:47:17 Get A/D value=-858993460 result=40 09:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:17 Parameters OK 09:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:17 Set A/D data flow result=40 09:47:17 Set A/D channel type result=40 09:47:17 Set A/D encoding result=40 09:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:17 Set channel filter=0.000000e+000 result=40 09:47:17 Config A/D Result=40 09:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:17 Get A/D filter: -9.255963e+061 result=40 09:47:17 Get A/D value=-858993460 result=40 09:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:17 Aux= 09:47:17 Message to Camera, serial 112558 queued 09:47:54 Received message from Master: op=PointingHead serial=112571 09:47:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:47:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:47:54 Point started: ret=0 09:47:54 point_skyscan result=0 09:47:55 Check angles 09:47:55 SkyScan query 09:47:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 09:47:56 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 09:47:56 Check angles 09:47:56 SkyScan query 09:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:47:56 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:47:56 Message to Master queued w/err=0: serial=112571 error=0 09:48:01 Received message from Master: op=Filter serial=112572 09:48:01 Color wheel filter change from 0 to 0 09:48:01 FLIGetFilterPos err=0 currentPosition=0 09:48:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:01 Filter is already there-color wheel unchanged 09:48:01 Received message from Master: op=Shutter serial=112573 09:48:01 Shutter LASER open 09:48:02 Received message from Camera: op=State serial=112575 09:48:02 GetSingleValue result=40 Value=cccccccc 09:48:02 SkyScan query 09:48:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:48:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:02 Parameters OK 09:48:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:02 Set A/D data flow result=40 09:48:02 Set A/D channel type result=40 09:48:02 Set A/D encoding result=40 09:48:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:02 Set channel filter=0.000000e+000 result=40 09:48:02 Config A/D Result=40 09:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:02 Get A/D filter: -9.255963e+061 result=40 09:48:02 Get A/D value=-858993460 result=40 09:48:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:02 Parameters OK 09:48:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:02 Set A/D data flow result=40 09:48:02 Set A/D channel type result=40 09:48:02 Set A/D encoding result=40 09:48:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:02 Set channel filter=0.000000e+000 result=40 09:48:02 Config A/D Result=40 09:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:02 Get A/D filter: -9.255963e+061 result=40 09:48:02 Get A/D value=-858993460 result=40 09:48:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:02 Aux= 09:48:02 Message to Camera, serial 112575 queued 09:48:11 Received message from Master: op=Shutter serial=112585 09:48:11 Shutter LASER close 09:48:11 Received message from Master: op=PointingHead serial=112589 09:48:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:48:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:48:12 Point started: ret=0 09:48:12 point_skyscan result=0 09:48:12 Check angles 09:48:12 SkyScan query 09:48:13 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.145<-21543 Statuses=0009 0009 09:48:13 Msec=0 True Az=136.17 Ze=-143.145 Az status=0009 Ze status=0009 09:48:13 Check angles 09:48:13 SkyScan query 09:48:14 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.16<-20144 Statuses=0009 0009 09:48:14 Msec=750 True Az=153.51 Ze=-122.16 Az status=0009 Ze status=0009 09:48:14 Check angles 09:48:14 SkyScan query 09:48:15 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.265<-18751 Statuses=0009 0009 09:48:15 Msec=1500 True Az=171.06 Ze=-101.265 Az status=0009 Ze status=0009 09:48:15 Check angles 09:48:15 SkyScan query 09:48:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.295<-17353 Statuses=0008 0009 09:48:15 Msec=2250 True Az=176.01 Ze=-80.295 Az status=0008 Ze status=0009 09:48:15 Check angles 09:48:15 SkyScan query 09:48:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.325<-15955 Statuses=0008 0009 09:48:16 Msec=3000 True Az=176.01 Ze=-59.325 Az status=0008 Ze status=0009 09:48:16 Check angles 09:48:16 SkyScan query 09:48:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:48:17 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:48:17 Message to Master queued w/err=0: serial=112589 error=0 09:48:22 Received message from Master: op=Filter serial=112590 09:48:22 Color wheel filter change from 0 to 0 09:48:22 FLIGetFilterPos err=0 currentPosition=0 09:48:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:22 Filter is already there-color wheel unchanged 09:48:22 Received message from Master: op=Shutter serial=112591 09:48:22 Shutter LASER close 09:48:22 Received message from Camera: op=State serial=112593 09:48:22 GetSingleValue result=40 Value=cccccccc 09:48:22 SkyScan query 09:48:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:48:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:23 Parameters OK 09:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:23 Set A/D data flow result=40 09:48:23 Set A/D channel type result=40 09:48:23 Set A/D encoding result=40 09:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:23 Set channel filter=0.000000e+000 result=40 09:48:23 Config A/D Result=40 09:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:23 Get A/D filter: -9.255963e+061 result=40 09:48:23 Get A/D value=-858993460 result=40 09:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:23 Parameters OK 09:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:23 Set A/D data flow result=40 09:48:23 Set A/D channel type result=40 09:48:23 Set A/D encoding result=40 09:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:23 Set channel filter=0.000000e+000 result=40 09:48:23 Config A/D Result=40 09:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:23 Get A/D filter: -9.255963e+061 result=40 09:48:23 Get A/D value=-858993460 result=40 09:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:23 Aux= 09:48:23 Message to Camera, serial 112593 queued 09:49:00 Received message from Master: op=PointingHead serial=112606 09:49:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:49:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:49:00 Point started: ret=0 09:49:00 point_skyscan result=0 09:49:01 Check angles 09:49:01 SkyScan query 09:49:01 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.96<-13464 Statuses=0009 0009 09:49:01 Msec=0 True Az=153.165 Ze=-21.96 Az status=0009 Ze status=0009 09:49:01 Check angles 09:49:01 SkyScan query 09:49:02 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.975<-12065 Statuses=0009 0009 09:49:02 Msec=750 True Az=135.735 Ze=-0.975 Az status=0009 Ze status=0009 09:49:02 Check angles 09:49:02 SkyScan query 09:49:03 SkyScan query done: ret=0 az=117.795<-7853 ze=20.4<-10640 Statuses=0009 0009 09:49:03 Msec=1500 True Az=117.795 Ze=20.4 Az status=0009 Ze status=0009 09:49:03 Check angles 09:49:03 SkyScan query 09:49:03 SkyScan query done: ret=0 az=100.41<-6694 ze=41.385<-9241 Statuses=0009 0009 09:49:03 Msec=2250 True Az=100.41 Ze=41.385 Az status=0009 Ze status=0009 09:49:04 Check angles 09:49:04 SkyScan query 09:49:04 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 09:49:04 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 09:49:04 Check angles 09:49:04 SkyScan query 09:49:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:49:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:49:05 Message to Master queued w/err=0: serial=112606 error=0 09:49:10 Received message from Master: op=Filter serial=112607 09:49:10 Color wheel filter change from 0 to 0 09:49:10 FLIGetFilterPos err=0 currentPosition=0 09:49:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:10 Filter is already there-color wheel unchanged 09:49:10 Received message from Master: op=Shutter serial=112608 09:49:10 Shutter LASER close 09:49:10 Received message from Camera: op=State serial=112610 09:49:10 GetSingleValue result=40 Value=cccccccc 09:49:10 SkyScan query 09:49:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:49:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:11 Parameters OK 09:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:11 Set A/D data flow result=40 09:49:11 Set A/D channel type result=40 09:49:11 Set A/D encoding result=40 09:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:11 Set channel filter=0.000000e+000 result=40 09:49:11 Config A/D Result=40 09:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:11 Get A/D filter: -9.255963e+061 result=40 09:49:11 Get A/D value=-858993460 result=40 09:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:11 Parameters OK 09:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:11 Set A/D data flow result=40 09:49:11 Set A/D channel type result=40 09:49:11 Set A/D encoding result=40 09:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:11 Set channel filter=0.000000e+000 result=40 09:49:11 Config A/D Result=40 09:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:11 Get A/D filter: -9.255963e+061 result=40 09:49:11 Get A/D value=-858993460 result=40 09:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:11 Aux= 09:49:11 Message to Camera, serial 112610 queued 09:49:48 Received message from Master: op=PointingHead serial=112623 09:49:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:49:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:49:48 Point started: ret=0 09:49:48 point_skyscan result=0 09:49:49 Check angles 09:49:49 SkyScan query 09:49:49 SkyScan query done: ret=0 az=109.32<-7288 ze=38.49<-9434 Statuses=0009 0008 09:49:49 Msec=0 True Az=109.32 Ze=38.49 Az status=0009 Ze status=0008 09:49:49 Check angles 09:49:49 SkyScan query 09:49:50 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 09:49:50 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 09:49:50 Check angles 09:49:50 SkyScan query 09:49:51 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 09:49:51 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 09:49:51 Check angles 09:49:51 SkyScan query 09:49:52 SkyScan query done: ret=0 az=161.64<-10776 ze=38.505<-9433 Statuses=0009 0008 09:49:52 Msec=2250 True Az=161.64 Ze=38.505 Az status=0009 Ze status=0008 09:49:52 Check angles 09:49:52 SkyScan query 09:49:52 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:49:52 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:49:52 Check angles 09:49:52 SkyScan query 09:49:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:49:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:49:53 Message to Master queued w/err=0: serial=112623 error=0 09:49:58 Received message from Master: op=Filter serial=112624 09:49:58 Color wheel filter change from 0 to 0 09:49:58 FLIGetFilterPos err=0 currentPosition=0 09:49:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:58 Filter is already there-color wheel unchanged 09:49:58 Received message from Master: op=Shutter serial=112625 09:49:58 Shutter LASER close 09:49:58 Received message from Camera: op=State serial=112627 09:49:58 GetSingleValue result=40 Value=cccccccc 09:49:58 SkyScan query 09:49:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:49:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:59 Parameters OK 09:49:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:59 Set A/D data flow result=40 09:49:59 Set A/D channel type result=40 09:49:59 Set A/D encoding result=40 09:49:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:59 Set channel filter=0.000000e+000 result=40 09:49:59 Config A/D Result=40 09:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:59 Get A/D filter: -9.255963e+061 result=40 09:49:59 Get A/D value=-858993460 result=40 09:49:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:59 Parameters OK 09:49:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:59 Set A/D data flow result=40 09:49:59 Set A/D channel type result=40 09:49:59 Set A/D encoding result=40 09:49:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:59 Set channel filter=0.000000e+000 result=40 09:49:59 Config A/D Result=40 09:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:59 Get A/D filter: -9.255963e+061 result=40 09:49:59 Get A/D value=-858993460 result=40 09:49:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:59 Aux= 09:49:59 Message to Camera, serial 112627 queued 09:50:36 Received message from Master: op=PointingHead serial=112640 09:50:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:50:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:50:36 Point started: ret=0 09:50:36 point_skyscan result=0 09:50:37 Check angles 09:50:37 SkyScan query 09:50:37 SkyScan query done: ret=0 az=152.745<-10183 ze=8.19<-11454 Statuses=0009 0009 09:50:37 Msec=0 True Az=152.745 Ze=8.19 Az status=0009 Ze status=0009 09:50:38 Check angles 09:50:38 SkyScan query 09:50:38 SkyScan query done: ret=0 az=135.195<-9013 ze=-12.615<-12841 Statuses=0009 0009 09:50:38 Msec=750 True Az=135.195 Ze=-12.615 Az status=0009 Ze status=0009 09:50:38 Check angles 09:50:38 SkyScan query 09:50:39 SkyScan query done: ret=0 az=117.375<-7825 ze=-34.065<-14271 Statuses=0009 0009 09:50:39 Msec=1500 True Az=117.375 Ze=-34.065 Az status=0009 Ze status=0009 09:50:39 Check angles 09:50:39 SkyScan query 09:50:40 SkyScan query done: ret=0 az=99.975<-6665 ze=-51.555<-15437 Statuses=0009 0009 09:50:40 Msec=2250 True Az=99.975 Ze=-51.555 Az status=0009 Ze status=0009 09:50:40 Check angles 09:50:40 SkyScan query 09:50:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 09:50:40 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 09:50:41 Check angles 09:50:41 SkyScan query 09:50:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:50:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:50:41 Message to Master queued w/err=0: serial=112640 error=0 09:50:46 Received message from Master: op=Filter serial=112641 09:50:46 Color wheel filter change from 0 to 0 09:50:46 FLIGetFilterPos err=0 currentPosition=0 09:50:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:46 Filter is already there-color wheel unchanged 09:50:46 Received message from Master: op=Shutter serial=112642 09:50:46 Shutter LASER close 09:50:46 Received message from Camera: op=State serial=112644 09:50:46 GetSingleValue result=40 Value=cccccccc 09:50:46 SkyScan query 09:50:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:50:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:47 Parameters OK 09:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:47 Set A/D data flow result=40 09:50:47 Set A/D channel type result=40 09:50:47 Set A/D encoding result=40 09:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:47 Set channel filter=0.000000e+000 result=40 09:50:47 Config A/D Result=40 09:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:47 Get A/D filter: -9.255963e+061 result=40 09:50:47 Get A/D value=-858993460 result=40 09:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:47 Parameters OK 09:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:47 Set A/D data flow result=40 09:50:47 Set A/D channel type result=40 09:50:47 Set A/D encoding result=40 09:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:47 Set channel filter=0.000000e+000 result=40 09:50:47 Config A/D Result=40 09:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:47 Get A/D filter: -9.255963e+061 result=40 09:50:47 Get A/D value=-858993460 result=40 09:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:47 Aux= 09:50:47 Message to Camera, serial 112644 queued 09:51:24 Received message from Master: op=PointingHead serial=112657 09:51:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:51:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:51:24 Point started: ret=0 09:51:24 point_skyscan result=0 09:51:25 Check angles 09:51:25 SkyScan query 09:51:25 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.48<-17432 Statuses=0009 0009 09:51:25 Msec=0 True Az=109.125 Ze=-81.48 Az status=0009 Ze status=0009 09:51:26 Check angles 09:51:26 SkyScan query 09:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 09:51:26 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 09:51:26 Check angles 09:51:26 SkyScan query 09:51:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 09:51:27 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 09:51:27 Check angles 09:51:27 SkyScan query 09:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 09:51:28 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 09:51:28 Check angles 09:51:28 SkyScan query 09:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 09:51:28 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 09:51:29 Check angles 09:51:29 SkyScan query 09:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:51:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:51:29 Message to Master queued w/err=0: serial=112657 error=0 09:51:34 Received message from Master: op=Filter serial=112658 09:51:34 Color wheel filter change from 0 to 0 09:51:34 FLIGetFilterPos err=0 currentPosition=0 09:51:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:34 Filter is already there-color wheel unchanged 09:51:34 Received message from Master: op=Shutter serial=112659 09:51:34 Shutter LASER open 09:51:35 Received message from Camera: op=State serial=112661 09:51:35 GetSingleValue result=40 Value=cccccccc 09:51:35 SkyScan query 09:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:51:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:35 Parameters OK 09:51:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:35 Set A/D data flow result=40 09:51:35 Set A/D channel type result=40 09:51:35 Set A/D encoding result=40 09:51:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:35 Set channel filter=0.000000e+000 result=40 09:51:35 Config A/D Result=40 09:51:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:35 Get A/D filter: -9.255963e+061 result=40 09:51:35 Get A/D value=-858993460 result=40 09:51:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:35 Parameters OK 09:51:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:35 Set A/D data flow result=40 09:51:35 Set A/D channel type result=40 09:51:35 Set A/D encoding result=40 09:51:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:35 Set channel filter=0.000000e+000 result=40 09:51:35 Config A/D Result=40 09:51:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:35 Get A/D filter: -9.255963e+061 result=40 09:51:35 Get A/D value=-858993460 result=40 09:51:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:35 Aux= 09:51:35 Message to Camera, serial 112661 queued 09:51:44 Received message from Master: op=Shutter serial=112671 09:51:44 Shutter LASER close 09:51:44 Received message from Master: op=PointingHead serial=112675 09:51:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:51:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:51:44 Point started: ret=0 09:51:44 point_skyscan result=0 09:51:45 Check angles 09:51:45 SkyScan query 09:51:46 SkyScan query done: ret=0 az=89.58<-5972 ze=156.945<-1537 Statuses=0009 0009 09:51:46 Msec=0 True Az=89.58 Ze=156.945 Az status=0009 Ze status=0009 09:51:46 Check angles 09:51:46 SkyScan query 09:51:46 SkyScan query done: ret=0 az=71.685<-4779 ze=135.54<-2964 Statuses=0009 0009 09:51:46 Msec=750 True Az=71.685 Ze=135.54 Az status=0009 Ze status=0009 09:51:47 Check angles 09:51:47 SkyScan query 09:51:47 SkyScan query done: ret=0 az=54.39<-3626 ze=114.585<-4361 Statuses=0009 0009 09:51:47 Msec=1500 True Az=54.39 Ze=114.585 Az status=0009 Ze status=0009 09:51:47 Check angles 09:51:47 SkyScan query 09:51:48 SkyScan query done: ret=0 az=40.95<-2730 ze=93.645<-5757 Statuses=0009 0009 09:51:48 Msec=2250 True Az=40.95 Ze=93.645 Az status=0009 Ze status=0009 09:51:48 Check angles 09:51:48 SkyScan query 09:51:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.66<-7156 Statuses=0008 0009 09:51:49 Msec=3000 True Az=40.995 Ze=72.66 Az status=0008 Ze status=0009 09:51:49 Check angles 09:51:49 SkyScan query 09:51:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 09:51:49 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 09:51:50 Check angles 09:51:50 SkyScan query 09:51:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:51:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:51:50 Message to Master queued w/err=0: serial=112675 error=0 09:51:55 Received message from Master: op=Filter serial=112676 09:51:55 Color wheel filter change from 0 to 0 09:51:55 FLIGetFilterPos err=0 currentPosition=0 09:51:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:55 Filter is already there-color wheel unchanged 09:51:55 Received message from Master: op=Shutter serial=112677 09:51:55 Shutter LASER close 09:51:56 Received message from Camera: op=State serial=112679 09:51:56 GetSingleValue result=40 Value=cccccccc 09:51:56 SkyScan query 09:51:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:51:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:56 Parameters OK 09:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:56 Set A/D data flow result=40 09:51:56 Set A/D channel type result=40 09:51:56 Set A/D encoding result=40 09:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:56 Set channel filter=0.000000e+000 result=40 09:51:56 Config A/D Result=40 09:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:56 Get A/D filter: -9.255963e+061 result=40 09:51:56 Get A/D value=-858993460 result=40 09:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:56 Parameters OK 09:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:56 Set A/D data flow result=40 09:51:56 Set A/D channel type result=40 09:51:56 Set A/D encoding result=40 09:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:56 Set channel filter=0.000000e+000 result=40 09:51:56 Config A/D Result=40 09:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:56 Get A/D filter: -9.255963e+061 result=40 09:51:56 Get A/D value=-858993460 result=40 09:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:56 Aux= 09:51:56 Message to Camera, serial 112679 queued 09:52:33 Received message from Master: op=PointingHead serial=112692 09:52:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:52:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:52:33 Point started: ret=0 09:52:33 point_skyscan result=0 09:52:34 Check angles 09:52:34 SkyScan query 09:52:35 SkyScan query done: ret=0 az=64.605<-4307 ze=66.54<-7564 Statuses=0009 0008 09:52:35 Msec=0 True Az=64.605 Ze=66.54 Az status=0009 Ze status=0008 09:52:35 Check angles 09:52:35 SkyScan query 09:52:35 SkyScan query done: ret=0 az=82.05<-5470 ze=66.495<-7567 Statuses=0009 0008 09:52:35 Msec=750 True Az=82.05 Ze=66.495 Az status=0009 Ze status=0008 09:52:36 Check angles 09:52:36 SkyScan query 09:52:36 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 09:52:36 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 09:52:36 Check angles 09:52:36 SkyScan query 09:52:37 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 09:52:37 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 09:52:37 Check angles 09:52:37 SkyScan query 09:52:38 SkyScan query done: ret=0 az=134.505<-8967 ze=66.495<-7567 Statuses=0009 0008 09:52:38 Msec=3000 True Az=134.505 Ze=66.495 Az status=0009 Ze status=0008 09:52:38 Check angles 09:52:38 SkyScan query 09:52:38 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 09:52:38 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 09:52:39 Check angles 09:52:39 SkyScan query 09:52:39 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 09:52:39 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 09:52:39 Message to Master queued w/err=0: serial=112692 error=0 09:52:44 Received message from Master: op=Filter serial=112693 09:52:44 Color wheel filter change from 0 to 0 09:52:44 FLIGetFilterPos err=0 currentPosition=0 09:52:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:44 Filter is already there-color wheel unchanged 09:52:44 Received message from Master: op=Shutter serial=112694 09:52:44 Shutter LASER close 09:52:44 Received message from Camera: op=State serial=112696 09:52:44 GetSingleValue result=40 Value=cccccccc 09:52:44 SkyScan query 09:52:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:52:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:45 Parameters OK 09:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:45 Set A/D data flow result=40 09:52:45 Set A/D channel type result=40 09:52:45 Set A/D encoding result=40 09:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:45 Set channel filter=0.000000e+000 result=40 09:52:45 Config A/D Result=40 09:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:45 Get A/D filter: -9.255963e+061 result=40 09:52:45 Get A/D value=-858993460 result=40 09:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:45 Parameters OK 09:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:45 Set A/D data flow result=40 09:52:45 Set A/D channel type result=40 09:52:45 Set A/D encoding result=40 09:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:45 Set channel filter=0.000000e+000 result=40 09:52:45 Config A/D Result=40 09:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:45 Get A/D filter: -9.255963e+061 result=40 09:52:45 Get A/D value=-858993460 result=40 09:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:45 Aux= 09:52:45 Message to Camera, serial 112696 queued 09:53:21 Received message from Master: op=PointingHead serial=112708 09:53:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:53:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:53:21 Point started: ret=0 09:53:21 point_skyscan result=0 09:53:22 Check angles 09:53:22 SkyScan query 09:53:23 SkyScan query done: ret=0 az=134.445<-8963 ze=36.135<-9591 Statuses=0009 0009 09:53:23 Msec=0 True Az=134.445 Ze=36.135 Az status=0009 Ze status=0009 09:53:23 Check angles 09:53:23 SkyScan query 09:53:23 SkyScan query done: ret=0 az=116.655<-7777 ze=14.7<-11020 Statuses=0009 0009 09:53:23 Msec=750 True Az=116.655 Ze=14.7 Az status=0009 Ze status=0009 09:53:23 Check angles 09:53:23 SkyScan query 09:53:24 SkyScan query done: ret=0 az=99.195<-6613 ze=-6.24<-12416 Statuses=0009 0009 09:53:24 Msec=1500 True Az=99.195 Ze=-6.24 Az status=0009 Ze status=0009 09:53:24 Check angles 09:53:24 SkyScan query 09:53:25 SkyScan query done: ret=0 az=81.84<-5456 ze=-27.225<-13815 Statuses=0009 0009 09:53:25 Msec=2250 True Az=81.84 Ze=-27.225 Az status=0009 Ze status=0009 09:53:25 Check angles 09:53:25 SkyScan query 09:53:26 SkyScan query done: ret=0 az=64.23<-4282 ze=-38.58<-14572 Statuses=0009 0008 09:53:26 Msec=3000 True Az=64.23 Ze=-38.58 Az status=0009 Ze status=0008 09:53:26 Check angles 09:53:26 SkyScan query 09:53:26 SkyScan query done: ret=0 az=46.8<-3120 ze=-38.52<-14568 Statuses=0009 0008 09:53:26 Msec=3750 True Az=46.8 Ze=-38.52 Az status=0009 Ze status=0008 09:53:26 Check angles 09:53:26 SkyScan query 09:53:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:53:27 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:53:27 Message to Master queued w/err=0: serial=112708 error=0 09:53:32 Received message from Master: op=Filter serial=112709 09:53:32 Color wheel filter change from 0 to 0 09:53:32 FLIGetFilterPos err=0 currentPosition=0 09:53:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:32 Filter is already there-color wheel unchanged 09:53:32 Received message from Master: op=Shutter serial=112710 09:53:32 Shutter LASER close 09:53:32 Received message from Camera: op=State serial=112712 09:53:32 GetSingleValue result=40 Value=cccccccc 09:53:32 SkyScan query 09:53:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:53:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:33 Parameters OK 09:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:33 Set A/D data flow result=40 09:53:33 Set A/D channel type result=40 09:53:33 Set A/D encoding result=40 09:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:33 Set channel filter=0.000000e+000 result=40 09:53:33 Config A/D Result=40 09:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:33 Get A/D filter: -9.255963e+061 result=40 09:53:33 Get A/D value=-858993460 result=40 09:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:33 Parameters OK 09:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:33 Set A/D data flow result=40 09:53:33 Set A/D channel type result=40 09:53:33 Set A/D encoding result=40 09:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:33 Set channel filter=0.000000e+000 result=40 09:53:33 Config A/D Result=40 09:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:33 Get A/D filter: -9.255963e+061 result=40 09:53:33 Get A/D value=-858993460 result=40 09:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:33 Aux= 09:53:33 Message to Camera, serial 112712 queued 09:54:10 Received message from Master: op=PointingHead serial=112725 09:54:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:54:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:54:10 Point started: ret=0 09:54:10 point_skyscan result=0 09:54:11 Check angles 09:54:11 SkyScan query 09:54:11 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.535<-16569 Statuses=0009 0009 09:54:11 Msec=0 True Az=64.215 Ze=-68.535 Az status=0009 Ze status=0009 09:54:12 Check angles 09:54:12 SkyScan query 09:54:12 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.475<-17965 Statuses=0009 0009 09:54:12 Msec=750 True Az=81.585 Ze=-89.475 Az status=0009 Ze status=0009 09:54:12 Check angles 09:54:12 SkyScan query 09:54:13 SkyScan query done: ret=0 az=99.03<-6602 ze=-110.43<-19362 Statuses=0009 0009 09:54:13 Msec=1500 True Az=99.03 Ze=-110.43 Az status=0009 Ze status=0009 09:54:13 Check angles 09:54:13 SkyScan query 09:54:14 SkyScan query done: ret=0 az=116.565<-7771 ze=-131.355<-20757 Statuses=0009 0009 09:54:14 Msec=2250 True Az=116.565 Ze=-131.355 Az status=0009 Ze status=0009 09:54:14 Check angles 09:54:14 SkyScan query 09:54:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 09:54:14 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 09:54:15 Check angles 09:54:15 SkyScan query 09:54:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:54:15 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:54:15 Message to Master queued w/err=0: serial=112725 error=0 09:54:20 Received message from Master: op=Filter serial=112726 09:54:20 Color wheel filter change from 0 to 0 09:54:20 FLIGetFilterPos err=0 currentPosition=0 09:54:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:20 Filter is already there-color wheel unchanged 09:54:20 Received message from Master: op=Shutter serial=112727 09:54:20 Shutter LASER close 09:54:20 Received message from Camera: op=State serial=112729 09:54:20 GetSingleValue result=40 Value=cccccccc 09:54:20 SkyScan query 09:54:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:54:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:21 Parameters OK 09:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:21 Set A/D data flow result=40 09:54:21 Set A/D channel type result=40 09:54:21 Set A/D encoding result=40 09:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:21 Set channel filter=0.000000e+000 result=40 09:54:21 Config A/D Result=40 09:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:21 Get A/D filter: -9.255963e+061 result=40 09:54:21 Get A/D value=-858993460 result=40 09:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:21 Parameters OK 09:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:21 Set A/D data flow result=40 09:54:21 Set A/D channel type result=40 09:54:21 Set A/D encoding result=40 09:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:21 Set channel filter=0.000000e+000 result=40 09:54:21 Config A/D Result=40 09:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:21 Get A/D filter: -9.255963e+061 result=40 09:54:21 Get A/D value=-858993460 result=40 09:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:21 Aux= 09:54:21 Message to Camera, serial 112729 queued 09:54:58 Received message from Master: op=PointingHead serial=112742 09:54:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:54:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:54:58 Point started: ret=0 09:54:58 point_skyscan result=0 09:54:59 Check angles 09:54:59 SkyScan query 09:54:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 09:54:59 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 09:55:00 Check angles 09:55:00 SkyScan query 09:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:55:00 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:55:00 Message to Master queued w/err=0: serial=112742 error=0 09:55:05 Received message from Master: op=Filter serial=112743 09:55:05 Color wheel filter change from 0 to 0 09:55:05 FLIGetFilterPos err=0 currentPosition=0 09:55:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:05 Filter is already there-color wheel unchanged 09:55:05 Received message from Master: op=Shutter serial=112744 09:55:05 Shutter LASER open 09:55:06 Received message from Camera: op=State serial=112746 09:55:06 GetSingleValue result=40 Value=cccccccc 09:55:06 SkyScan query 09:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:55:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:06 Parameters OK 09:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:06 Set A/D data flow result=40 09:55:06 Set A/D channel type result=40 09:55:06 Set A/D encoding result=40 09:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:06 Set channel filter=0.000000e+000 result=40 09:55:06 Config A/D Result=40 09:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:06 Get A/D filter: -9.255963e+061 result=40 09:55:06 Get A/D value=-858993460 result=40 09:55:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:06 Parameters OK 09:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:06 Set A/D data flow result=40 09:55:06 Set A/D channel type result=40 09:55:06 Set A/D encoding result=40 09:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:06 Set channel filter=0.000000e+000 result=40 09:55:06 Config A/D Result=40 09:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:06 Get A/D filter: -9.255963e+061 result=40 09:55:06 Get A/D value=-858993460 result=40 09:55:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:06 Aux= 09:55:06 Message to Camera, serial 112746 queued 09:55:15 Received message from Master: op=Shutter serial=112756 09:55:15 Shutter LASER close 09:55:15 Received message from Master: op=PointingHead serial=112760 09:55:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:55:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:55:15 Point started: ret=0 09:55:15 point_skyscan result=0 09:55:16 Check angles 09:55:16 SkyScan query 09:55:17 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.475<-21565 Statuses=0009 0009 09:55:17 Msec=0 True Az=135.75 Ze=-143.475 Az status=0009 Ze status=0009 09:55:17 Check angles 09:55:17 SkyScan query 09:55:18 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.04<-20136 Statuses=0009 0009 09:55:18 Msec=750 True Az=153.63 Ze=-122.04 Az status=0009 Ze status=0009 09:55:18 Check angles 09:55:18 SkyScan query 09:55:18 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.62<-18708 Statuses=0009 0009 09:55:18 Msec=1500 True Az=171.525 Ze=-100.62 Az status=0009 Ze status=0009 09:55:18 Check angles 09:55:18 SkyScan query 09:55:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 09:55:19 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 09:55:19 Check angles 09:55:19 SkyScan query 09:55:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.29<-15886 Statuses=0008 0009 09:55:20 Msec=3000 True Az=176.01 Ze=-58.29 Az status=0008 Ze status=0009 09:55:20 Check angles 09:55:20 SkyScan query 09:55:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:55:21 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:55:21 Message to Master queued w/err=0: serial=112760 error=0 09:55:26 Received message from Master: op=Filter serial=112761 09:55:26 Color wheel filter change from 0 to 0 09:55:26 FLIGetFilterPos err=0 currentPosition=0 09:55:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:26 Filter is already there-color wheel unchanged 09:55:26 Received message from Master: op=Shutter serial=112762 09:55:26 Shutter LASER close 09:55:26 Received message from Camera: op=State serial=112764 09:55:26 GetSingleValue result=40 Value=cccccccc 09:55:26 SkyScan query 09:55:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:55:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:27 Parameters OK 09:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:27 Set A/D data flow result=40 09:55:27 Set A/D channel type result=40 09:55:27 Set A/D encoding result=40 09:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:27 Set channel filter=0.000000e+000 result=40 09:55:27 Config A/D Result=40 09:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:27 Get A/D filter: -9.255963e+061 result=40 09:55:27 Get A/D value=-858993460 result=40 09:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:27 Parameters OK 09:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:27 Set A/D data flow result=40 09:55:27 Set A/D channel type result=40 09:55:27 Set A/D encoding result=40 09:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:27 Set channel filter=0.000000e+000 result=40 09:55:27 Config A/D Result=40 09:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:27 Get A/D filter: -9.255963e+061 result=40 09:55:27 Get A/D value=-858993460 result=40 09:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:27 Aux= 09:55:27 Message to Camera, serial 112764 queued [UTC 2018-12-13 09:55:52] 09:56:03 Received message from Master: op=PointingHead serial=112777 09:56:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:56:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:56:04 Point started: ret=0 09:56:04 point_skyscan result=0 09:56:04 Check angles 09:56:04 SkyScan query 09:56:05 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.915<-13461 Statuses=0009 0009 09:56:05 Msec=0 True Az=153.12 Ze=-21.915 Az status=0009 Ze status=0009 09:56:05 Check angles 09:56:05 SkyScan query 09:56:06 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.495<-12033 Statuses=0009 0009 09:56:06 Msec=750 True Az=135.345 Ze=-0.495 Az status=0009 Ze status=0009 09:56:06 Check angles 09:56:06 SkyScan query 09:56:07 SkyScan query done: ret=0 az=117.78<-7852 ze=20.46<-10636 Statuses=0009 0009 09:56:07 Msec=1500 True Az=117.78 Ze=20.46 Az status=0009 Ze status=0009 09:56:07 Check angles 09:56:07 SkyScan query 09:56:07 SkyScan query done: ret=0 az=100.41<-6694 ze=41.445<-9237 Statuses=0009 0009 09:56:07 Msec=2250 True Az=100.41 Ze=41.445 Az status=0009 Ze status=0009 09:56:07 Check angles 09:56:07 SkyScan query 09:56:08 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:56:08 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:56:08 Check angles 09:56:08 SkyScan query 09:56:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:56:09 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:56:09 Message to Master queued w/err=0: serial=112777 error=0 09:56:14 Received message from Master: op=Filter serial=112778 09:56:14 Color wheel filter change from 0 to 0 09:56:14 FLIGetFilterPos err=0 currentPosition=0 09:56:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:14 Filter is already there-color wheel unchanged 09:56:14 Received message from Master: op=Shutter serial=112779 09:56:14 Shutter LASER close 09:56:14 Received message from Camera: op=State serial=112781 09:56:14 GetSingleValue result=40 Value=cccccccc 09:56:14 SkyScan query 09:56:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:56:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:15 Parameters OK 09:56:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:15 Set A/D data flow result=40 09:56:15 Set A/D channel type result=40 09:56:15 Set A/D encoding result=40 09:56:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:15 Set channel filter=0.000000e+000 result=40 09:56:15 Config A/D Result=40 09:56:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:15 Get A/D filter: -9.255963e+061 result=40 09:56:15 Get A/D value=-858993460 result=40 09:56:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:15 Parameters OK 09:56:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:15 Set A/D data flow result=40 09:56:15 Set A/D channel type result=40 09:56:15 Set A/D encoding result=40 09:56:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:15 Set channel filter=0.000000e+000 result=40 09:56:15 Config A/D Result=40 09:56:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:15 Get A/D filter: -9.255963e+061 result=40 09:56:15 Get A/D value=-858993460 result=40 09:56:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:15 Aux= 09:56:15 Message to Camera, serial 112781 queued 09:56:51 Received message from Master: op=PointingHead serial=112794 09:56:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:56:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:56:52 Point started: ret=0 09:56:52 point_skyscan result=0 09:56:53 Check angles 09:56:53 SkyScan query 09:56:53 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 09:56:53 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 09:56:53 Check angles 09:56:53 SkyScan query 09:56:54 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 09:56:54 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 09:56:54 Check angles 09:56:54 SkyScan query 09:56:55 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 09:56:55 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 09:56:55 Check angles 09:56:55 SkyScan query 09:56:55 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 09:56:55 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 09:56:56 Check angles 09:56:56 SkyScan query 09:56:56 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:56:56 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:56:56 Check angles 09:56:56 SkyScan query 09:56:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:56:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:56:57 Message to Master queued w/err=0: serial=112794 error=0 09:57:02 Received message from Master: op=Filter serial=112795 09:57:02 Color wheel filter change from 0 to 0 09:57:02 FLIGetFilterPos err=0 currentPosition=0 09:57:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:02 Filter is already there-color wheel unchanged 09:57:02 Received message from Master: op=Shutter serial=112796 09:57:02 Shutter LASER close 09:57:02 Received message from Camera: op=State serial=112798 09:57:02 GetSingleValue result=40 Value=cccccccc 09:57:02 SkyScan query 09:57:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:57:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:03 Parameters OK 09:57:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:03 Set A/D data flow result=40 09:57:03 Set A/D channel type result=40 09:57:03 Set A/D encoding result=40 09:57:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:03 Set channel filter=0.000000e+000 result=40 09:57:03 Config A/D Result=40 09:57:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:03 Get A/D filter: -9.255963e+061 result=40 09:57:03 Get A/D value=-858993460 result=40 09:57:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:03 Parameters OK 09:57:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:03 Set A/D data flow result=40 09:57:03 Set A/D channel type result=40 09:57:03 Set A/D encoding result=40 09:57:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:03 Set channel filter=0.000000e+000 result=40 09:57:03 Config A/D Result=40 09:57:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:03 Get A/D filter: -9.255963e+061 result=40 09:57:03 Get A/D value=-858993460 result=40 09:57:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:03 Aux= 09:57:03 Message to Camera, serial 112798 queued 09:57:40 Received message from Master: op=PointingHead serial=112811 09:57:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:57:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:57:40 Point started: ret=0 09:57:40 point_skyscan result=0 09:57:41 Check angles 09:57:41 SkyScan query 09:57:41 SkyScan query done: ret=0 az=152.97<-10198 ze=8.61<-11426 Statuses=0009 0009 09:57:41 Msec=0 True Az=152.97 Ze=8.61 Az status=0009 Ze status=0009 09:57:41 Check angles 09:57:41 SkyScan query 09:57:42 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.36<-12824 Statuses=0009 0009 09:57:42 Msec=750 True Az=135.435 Ze=-12.36 Az status=0009 Ze status=0009 09:57:42 Check angles 09:57:42 SkyScan query 09:57:43 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.3<-14220 Statuses=0009 0009 09:57:43 Msec=1500 True Az=118.005 Ze=-33.3 Az status=0009 Ze status=0009 09:57:43 Check angles 09:57:43 SkyScan query 09:57:44 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.54<-15436 Statuses=0009 0009 09:57:44 Msec=2250 True Az=100.62 Ze=-51.54 Az status=0009 Ze status=0009 09:57:44 Check angles 09:57:44 SkyScan query 09:57:44 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:57:44 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:57:44 Check angles 09:57:44 SkyScan query 09:57:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:57:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:57:45 Message to Master queued w/err=0: serial=112811 error=0 09:57:50 Received message from Master: op=Filter serial=112812 09:57:50 Color wheel filter change from 0 to 0 09:57:50 FLIGetFilterPos err=0 currentPosition=0 09:57:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:50 Filter is already there-color wheel unchanged 09:57:50 Received message from Master: op=Shutter serial=112813 09:57:50 Shutter LASER close 09:57:50 Received message from Camera: op=State serial=112815 09:57:50 GetSingleValue result=40 Value=cccccccc 09:57:50 SkyScan query 09:57:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:57:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:51 Parameters OK 09:57:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:51 Set A/D data flow result=40 09:57:51 Set A/D channel type result=40 09:57:51 Set A/D encoding result=40 09:57:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:51 Set channel filter=0.000000e+000 result=40 09:57:51 Config A/D Result=40 09:57:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:51 Get A/D filter: -9.255963e+061 result=40 09:57:51 Get A/D value=-858993460 result=40 09:57:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:51 Parameters OK 09:57:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:51 Set A/D data flow result=40 09:57:51 Set A/D channel type result=40 09:57:51 Set A/D encoding result=40 09:57:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:51 Set channel filter=0.000000e+000 result=40 09:57:51 Config A/D Result=40 09:57:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:51 Get A/D filter: -9.255963e+061 result=40 09:57:51 Get A/D value=-858993460 result=40 09:57:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:51 Aux= 09:57:51 Message to Camera, serial 112815 queued 09:58:28 Received message from Master: op=PointingHead serial=112828 09:58:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:58:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:58:28 Point started: ret=0 09:58:28 point_skyscan result=0 09:58:29 Check angles 09:58:29 SkyScan query 09:58:29 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.51<-17434 Statuses=0009 0009 09:58:29 Msec=0 True Az=109.2 Ze=-81.51 Az status=0009 Ze status=0009 09:58:29 Check angles 09:58:29 SkyScan query 09:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 09:58:30 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 09:58:30 Check angles 09:58:30 SkyScan query 09:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 09:58:31 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 09:58:31 Check angles 09:58:31 SkyScan query 09:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 09:58:32 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 09:58:32 Check angles 09:58:32 SkyScan query 09:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 09:58:32 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 09:58:33 Check angles 09:58:33 SkyScan query 09:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:58:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:58:33 Message to Master queued w/err=0: serial=112828 error=0 09:58:38 Received message from Master: op=Filter serial=112829 09:58:38 Color wheel filter change from 0 to 0 09:58:38 FLIGetFilterPos err=0 currentPosition=0 09:58:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:38 Filter is already there-color wheel unchanged 09:58:38 Received message from Master: op=Shutter serial=112830 09:58:38 Shutter LASER open 09:58:38 Received message from Camera: op=State serial=112832 09:58:38 GetSingleValue result=40 Value=cccccccc 09:58:38 SkyScan query 09:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:58:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:39 Parameters OK 09:58:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:39 Set A/D data flow result=40 09:58:39 Set A/D channel type result=40 09:58:39 Set A/D encoding result=40 09:58:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:39 Set channel filter=0.000000e+000 result=40 09:58:39 Config A/D Result=40 09:58:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:39 Get A/D filter: -9.255963e+061 result=40 09:58:39 Get A/D value=-858993460 result=40 09:58:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:39 Parameters OK 09:58:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:39 Set A/D data flow result=40 09:58:39 Set A/D channel type result=40 09:58:39 Set A/D encoding result=40 09:58:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:39 Set channel filter=0.000000e+000 result=40 09:58:39 Config A/D Result=40 09:58:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:39 Get A/D filter: -9.255963e+061 result=40 09:58:39 Get A/D value=-858993460 result=40 09:58:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:39 Aux= 09:58:39 Message to Camera, serial 112832 queued 09:58:47 Received message from Master: op=Shutter serial=112842 09:58:47 Shutter LASER close 09:58:48 Received message from Master: op=PointingHead serial=112846 09:58:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:58:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:58:48 Point started: ret=0 09:58:48 point_skyscan result=0 09:58:49 Check angles 09:58:49 SkyScan query 09:58:50 SkyScan query done: ret=0 az=89.835<-5989 ze=157.365<-1509 Statuses=0009 0009 09:58:50 Msec=0 True Az=89.835 Ze=157.365 Az status=0009 Ze status=0009 09:58:50 Check angles 09:58:50 SkyScan query 09:58:50 SkyScan query done: ret=0 az=72.27<-4818 ze=136.365<-2909 Statuses=0009 0009 09:58:50 Msec=750 True Az=72.27 Ze=136.365 Az status=0009 Ze status=0009 09:58:50 Check angles 09:58:50 SkyScan query 09:58:51 SkyScan query done: ret=0 az=54.735<-3649 ze=115.005<-4333 Statuses=0009 0009 09:58:51 Msec=1500 True Az=54.735 Ze=115.005 Az status=0009 Ze status=0009 09:58:51 Check angles 09:58:51 SkyScan query 09:58:52 SkyScan query done: ret=0 az=40.905<-2727 ze=94.02<-5732 Statuses=0009 0009 09:58:52 Msec=2250 True Az=40.905 Ze=94.02 Az status=0009 Ze status=0009 09:58:52 Check angles 09:58:52 SkyScan query 09:58:53 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 09:58:53 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 09:58:53 Check angles 09:58:53 SkyScan query 09:58:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 09:58:53 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 09:58:53 Check angles 09:58:53 SkyScan query 09:58:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:58:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:58:54 Message to Master queued w/err=0: serial=112846 error=0 09:58:59 Received message from Master: op=Filter serial=112847 09:58:59 Color wheel filter change from 0 to 0 09:58:59 FLIGetFilterPos err=0 currentPosition=0 09:58:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:59 Filter is already there-color wheel unchanged 09:58:59 Received message from Master: op=Shutter serial=112848 09:58:59 Shutter LASER close 09:58:59 Received message from Camera: op=State serial=112850 09:58:59 GetSingleValue result=40 Value=cccccccc 09:58:59 SkyScan query 09:59:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:00 Parameters OK 09:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:00 Set A/D data flow result=40 09:59:00 Set A/D channel type result=40 09:59:00 Set A/D encoding result=40 09:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:00 Set channel filter=0.000000e+000 result=40 09:59:00 Config A/D Result=40 09:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:00 Get A/D filter: -9.255963e+061 result=40 09:59:00 Get A/D value=-858993460 result=40 09:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:00 Parameters OK 09:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:00 Set A/D data flow result=40 09:59:00 Set A/D channel type result=40 09:59:00 Set A/D encoding result=40 09:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:00 Set channel filter=0.000000e+000 result=40 09:59:00 Config A/D Result=40 09:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:00 Get A/D filter: -9.255963e+061 result=40 09:59:00 Get A/D value=-858993460 result=40 09:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:00 Aux= 09:59:00 Message to Camera, serial 112850 queued 09:59:37 Received message from Master: op=PointingHead serial=112863 09:59:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:59:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:59:37 Point started: ret=0 09:59:37 point_skyscan result=0 09:59:38 Check angles 09:59:38 SkyScan query 09:59:38 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 09:59:38 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 09:59:39 Check angles 09:59:39 SkyScan query 09:59:39 SkyScan query done: ret=0 az=81.78<-5452 ze=66.51<-7566 Statuses=0009 0008 09:59:39 Msec=750 True Az=81.78 Ze=66.51 Az status=0009 Ze status=0008 09:59:39 Check angles 09:59:39 SkyScan query 09:59:40 SkyScan query done: ret=0 az=99.315<-6621 ze=66.495<-7567 Statuses=0009 0008 09:59:40 Msec=1500 True Az=99.315 Ze=66.495 Az status=0009 Ze status=0008 09:59:40 Check angles 09:59:40 SkyScan query 09:59:41 SkyScan query done: ret=0 az=116.805<-7787 ze=66.495<-7567 Statuses=0009 0008 09:59:41 Msec=2250 True Az=116.805 Ze=66.495 Az status=0009 Ze status=0008 09:59:41 Check angles 09:59:41 SkyScan query 09:59:42 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 09:59:42 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 09:59:42 Check angles 09:59:42 SkyScan query 09:59:42 SkyScan query done: ret=0 az=151.65<-10110 ze=66.495<-7567 Statuses=0009 0008 09:59:42 Msec=3750 True Az=151.65 Ze=66.495 Az status=0009 Ze status=0008 09:59:42 Check angles 09:59:42 SkyScan query 09:59:43 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:59:43 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:59:43 Message to Master queued w/err=0: serial=112863 error=0 09:59:48 Received message from Master: op=Filter serial=112864 09:59:48 Color wheel filter change from 0 to 0 09:59:48 FLIGetFilterPos err=0 currentPosition=0 09:59:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:48 Filter is already there-color wheel unchanged 09:59:48 Received message from Master: op=Shutter serial=112865 09:59:48 Shutter LASER close 09:59:48 Received message from Camera: op=State serial=112867 09:59:48 GetSingleValue result=40 Value=cccccccc 09:59:48 SkyScan query 09:59:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:59:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:49 Parameters OK 09:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:49 Set A/D data flow result=40 09:59:49 Set A/D channel type result=40 09:59:49 Set A/D encoding result=40 09:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:49 Set channel filter=0.000000e+000 result=40 09:59:49 Config A/D Result=40 09:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:49 Get A/D filter: -9.255963e+061 result=40 09:59:49 Get A/D value=-858993460 result=40 09:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:49 Parameters OK 09:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:49 Set A/D data flow result=40 09:59:49 Set A/D channel type result=40 09:59:49 Set A/D encoding result=40 09:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:49 Set channel filter=0.000000e+000 result=40 09:59:49 Config A/D Result=40 09:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:49 Get A/D filter: -9.255963e+061 result=40 09:59:49 Get A/D value=-858993460 result=40 09:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:49 Aux= 09:59:49 Message to Camera, serial 112867 queued 10:00:26 Received message from Master: op=PointingHead serial=112880 10:00:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:00:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:00:26 Point started: ret=0 10:00:26 point_skyscan result=0 10:00:27 Check angles 10:00:27 SkyScan query 10:00:27 SkyScan query done: ret=0 az=134.79<-8986 ze=36.63<-9558 Statuses=0009 0009 10:00:27 Msec=0 True Az=134.79 Ze=36.63 Az status=0009 Ze status=0009 10:00:28 Check angles 10:00:28 SkyScan query 10:00:28 SkyScan query done: ret=0 az=117.06<-7804 ze=15.3<-10980 Statuses=0009 0009 10:00:28 Msec=750 True Az=117.06 Ze=15.3 Az status=0009 Ze status=0009 10:00:28 Check angles 10:00:28 SkyScan query 10:00:29 SkyScan query done: ret=0 az=99.33<-6622 ze=-6.165<-12411 Statuses=0009 0009 10:00:29 Msec=1500 True Az=99.33 Ze=-6.165 Az status=0009 Ze status=0009 10:00:29 Check angles 10:00:29 SkyScan query 10:00:30 SkyScan query done: ret=0 az=81.885<-5459 ze=-27.135<-13809 Statuses=0009 0009 10:00:30 Msec=2250 True Az=81.885 Ze=-27.135 Az status=0009 Ze status=0009 10:00:30 Check angles 10:00:30 SkyScan query 10:00:30 SkyScan query done: ret=0 az=64.365<-4291 ze=-38.565<-14571 Statuses=0009 0008 10:00:30 Msec=3000 True Az=64.365 Ze=-38.565 Az status=0009 Ze status=0008 10:00:31 Check angles 10:00:31 SkyScan query 10:00:31 SkyScan query done: ret=0 az=46.875<-3125 ze=-38.52<-14568 Statuses=0009 0008 10:00:31 Msec=3750 True Az=46.875 Ze=-38.52 Az status=0009 Ze status=0008 10:00:31 Check angles 10:00:31 SkyScan query 10:00:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:00:32 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:00:32 Message to Master queued w/err=0: serial=112880 error=0 10:00:37 Received message from Master: op=Filter serial=112881 10:00:37 Color wheel filter change from 0 to 0 10:00:37 FLIGetFilterPos err=0 currentPosition=0 10:00:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:37 Filter is already there-color wheel unchanged 10:00:37 Received message from Master: op=Shutter serial=112882 10:00:37 Shutter LASER close 10:00:37 Received message from Camera: op=State serial=112884 10:00:37 GetSingleValue result=40 Value=cccccccc 10:00:37 SkyScan query 10:00:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:00:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:38 Parameters OK 10:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:38 Set A/D data flow result=40 10:00:38 Set A/D channel type result=40 10:00:38 Set A/D encoding result=40 10:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:38 Set channel filter=0.000000e+000 result=40 10:00:38 Config A/D Result=40 10:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:38 Get A/D filter: -9.255963e+061 result=40 10:00:38 Get A/D value=-858993460 result=40 10:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:38 Parameters OK 10:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:38 Set A/D data flow result=40 10:00:38 Set A/D channel type result=40 10:00:38 Set A/D encoding result=40 10:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:38 Set channel filter=0.000000e+000 result=40 10:00:38 Config A/D Result=40 10:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:38 Get A/D filter: -9.255963e+061 result=40 10:00:38 Get A/D value=-858993460 result=40 10:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:38 Aux= 10:00:38 Message to Camera, serial 112884 queued 10:01:14 Received message from Master: op=PointingHead serial=112897 10:01:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:01:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:01:15 Point started: ret=0 10:01:15 point_skyscan result=0 10:01:16 Check angles 10:01:16 SkyScan query 10:01:16 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.37<-16558 Statuses=0009 0009 10:01:16 Msec=0 True Az=64.065 Ze=-68.37 Az status=0009 Ze status=0009 10:01:16 Check angles 10:01:16 SkyScan query 10:01:17 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.37<-17958 Statuses=0009 0009 10:01:17 Msec=750 True Az=81.54 Ze=-89.37 Az status=0009 Ze status=0009 10:01:17 Check angles 10:01:17 SkyScan query 10:01:18 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.76<-19384 Statuses=0009 0009 10:01:18 Msec=1500 True Az=99.39 Ze=-110.76 Az status=0009 Ze status=0009 10:01:18 Check angles 10:01:18 SkyScan query 10:01:18 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.685<-20779 Statuses=0009 0009 10:01:18 Msec=2250 True Az=116.91 Ze=-131.685 Az status=0009 Ze status=0009 10:01:19 Check angles 10:01:19 SkyScan query 10:01:19 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 10:01:19 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 10:01:19 Check angles 10:01:19 SkyScan query 10:01:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:01:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:01:20 Message to Master queued w/err=0: serial=112897 error=0 10:01:25 Received message from Master: op=Filter serial=112898 10:01:25 Color wheel filter change from 0 to 0 10:01:25 FLIGetFilterPos err=0 currentPosition=0 10:01:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:25 Filter is already there-color wheel unchanged 10:01:25 Received message from Master: op=Shutter serial=112899 10:01:25 Shutter LASER close 10:01:25 Received message from Camera: op=State serial=112901 10:01:25 GetSingleValue result=40 Value=cccccccc 10:01:25 SkyScan query 10:01:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:01:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:26 Parameters OK 10:01:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:26 Set A/D data flow result=40 10:01:26 Set A/D channel type result=40 10:01:26 Set A/D encoding result=40 10:01:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:26 Set channel filter=0.000000e+000 result=40 10:01:26 Config A/D Result=40 10:01:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:26 Get A/D filter: -9.255963e+061 result=40 10:01:26 Get A/D value=-858993460 result=40 10:01:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:26 Parameters OK 10:01:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:26 Set A/D data flow result=40 10:01:26 Set A/D channel type result=40 10:01:26 Set A/D encoding result=40 10:01:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:26 Set channel filter=0.000000e+000 result=40 10:01:26 Config A/D Result=40 10:01:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:26 Get A/D filter: -9.255963e+061 result=40 10:01:26 Get A/D value=-858993460 result=40 10:01:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:26 Aux= 10:01:26 Message to Camera, serial 112901 queued 10:02:03 Received message from Master: op=PointingHead serial=112914 10:02:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:02:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:02:03 Point started: ret=0 10:02:03 point_skyscan result=0 10:02:04 Check angles 10:02:04 SkyScan query 10:02:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 10:02:04 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 10:02:04 Check angles 10:02:04 SkyScan query 10:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:02:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:02:05 Message to Master queued w/err=0: serial=112914 error=0 10:02:10 Received message from Master: op=Filter serial=112915 10:02:10 Color wheel filter change from 0 to 0 10:02:10 FLIGetFilterPos err=0 currentPosition=0 10:02:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:10 Filter is already there-color wheel unchanged 10:02:10 Received message from Master: op=Shutter serial=112916 10:02:10 Shutter LASER open 10:02:10 Received message from Camera: op=State serial=112918 10:02:10 GetSingleValue result=40 Value=cccccccc 10:02:10 SkyScan query 10:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:02:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:11 Parameters OK 10:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:11 Set A/D data flow result=40 10:02:11 Set A/D channel type result=40 10:02:11 Set A/D encoding result=40 10:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:11 Set channel filter=0.000000e+000 result=40 10:02:11 Config A/D Result=40 10:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:11 Get A/D filter: -9.255963e+061 result=40 10:02:11 Get A/D value=-858993460 result=40 10:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:11 Parameters OK 10:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:11 Set A/D data flow result=40 10:02:11 Set A/D channel type result=40 10:02:11 Set A/D encoding result=40 10:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:11 Set channel filter=0.000000e+000 result=40 10:02:11 Config A/D Result=40 10:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:11 Get A/D filter: -9.255963e+061 result=40 10:02:11 Get A/D value=-858993460 result=40 10:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:11 Aux= 10:02:11 Message to Camera, serial 112918 queued 10:02:19 Received message from Master: op=Shutter serial=112928 10:02:19 Shutter LASER close 10:02:20 Received message from Master: op=PointingHead serial=112932 10:02:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:02:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:02:20 Point started: ret=0 10:02:20 point_skyscan result=0 10:02:21 Check angles 10:02:21 SkyScan query 10:02:22 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.875<-21525 Statuses=0009 0009 10:02:22 Msec=0 True Az=136.38 Ze=-142.875 Az status=0009 Ze status=0009 10:02:22 Check angles 10:02:22 SkyScan query 10:02:22 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.92<-20128 Statuses=0009 0009 10:02:22 Msec=750 True Az=153.825 Ze=-121.92 Az status=0009 Ze status=0009 10:02:23 Check angles 10:02:23 SkyScan query 10:02:23 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.98<-18732 Statuses=0009 0009 10:02:23 Msec=1500 True Az=171.3 Ze=-100.98 Az status=0009 Ze status=0009 10:02:23 Check angles 10:02:23 SkyScan query 10:02:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.085<-17339 Statuses=0008 0009 10:02:24 Msec=2250 True Az=176.01 Ze=-80.085 Az status=0008 Ze status=0009 10:02:24 Check angles 10:02:24 SkyScan query 10:02:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.085<-15939 Statuses=0008 0009 10:02:25 Msec=3000 True Az=176.01 Ze=-59.085 Az status=0008 Ze status=0009 10:02:25 Check angles 10:02:25 SkyScan query 10:02:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:02:25 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:02:25 Message to Master queued w/err=0: serial=112932 error=0 10:02:30 Received message from Master: op=Filter serial=112933 10:02:30 Color wheel filter change from 0 to 0 10:02:30 FLIGetFilterPos err=0 currentPosition=0 10:02:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:30 Filter is already there-color wheel unchanged 10:02:31 Received message from Master: op=Shutter serial=112934 10:02:31 Shutter LASER close 10:02:31 Received message from Camera: op=State serial=112936 10:02:31 GetSingleValue result=40 Value=cccccccc 10:02:31 SkyScan query 10:02:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:02:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:31 Parameters OK 10:02:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:31 Set A/D data flow result=40 10:02:31 Set A/D channel type result=40 10:02:31 Set A/D encoding result=40 10:02:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:31 Set channel filter=0.000000e+000 result=40 10:02:31 Config A/D Result=40 10:02:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:31 Get A/D filter: -9.255963e+061 result=40 10:02:31 Get A/D value=-858993460 result=40 10:02:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:31 Parameters OK 10:02:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:31 Set A/D data flow result=40 10:02:31 Set A/D channel type result=40 10:02:31 Set A/D encoding result=40 10:02:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:31 Set channel filter=0.000000e+000 result=40 10:02:31 Config A/D Result=40 10:02:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:31 Get A/D filter: -9.255963e+061 result=40 10:02:31 Get A/D value=-858993460 result=40 10:02:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:31 Aux= 10:02:31 Message to Camera, serial 112936 queued 10:03:07 Received message from Master: op=PointingHead serial=112948 10:03:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:03:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:03:08 Point started: ret=0 10:03:08 point_skyscan result=0 10:03:08 Check angles 10:03:08 SkyScan query 10:03:09 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.465<-13431 Statuses=0009 0009 10:03:09 Msec=0 True Az=152.745 Ze=-21.465 Az status=0009 Ze status=0009 10:03:09 Check angles 10:03:09 SkyScan query 10:03:10 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.48<-12032 Statuses=0009 0009 10:03:10 Msec=750 True Az=135.315 Ze=-0.48 Az status=0009 Ze status=0009 10:03:10 Check angles 10:03:10 SkyScan query 10:03:10 SkyScan query done: ret=0 az=117.45<-7830 ze=20.895<-10607 Statuses=0009 0009 10:03:10 Msec=1500 True Az=117.45 Ze=20.895 Az status=0009 Ze status=0009 10:03:11 Check angles 10:03:11 SkyScan query 10:03:11 SkyScan query done: ret=0 az=100.035<-6669 ze=41.85<-9210 Statuses=0009 0009 10:03:11 Msec=2250 True Az=100.035 Ze=41.85 Az status=0009 Ze status=0009 10:03:11 Check angles 10:03:11 SkyScan query 10:03:12 SkyScan query done: ret=0 az=86.01<-5734 ze=51.525<-8565 Statuses=0009 0008 10:03:12 Msec=3000 True Az=86.01 Ze=51.525 Az status=0009 Ze status=0008 10:03:12 Check angles 10:03:12 SkyScan query 10:03:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:03:13 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 10:03:13 Message to Master queued w/err=0: serial=112948 error=0 10:03:18 Received message from Master: op=Filter serial=112949 10:03:18 Color wheel filter change from 0 to 0 10:03:18 FLIGetFilterPos err=0 currentPosition=0 10:03:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:18 Filter is already there-color wheel unchanged 10:03:18 Received message from Master: op=Shutter serial=112950 10:03:18 Shutter LASER close 10:03:18 Received message from Camera: op=State serial=112952 10:03:18 GetSingleValue result=40 Value=cccccccc 10:03:18 SkyScan query 10:03:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 10:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:18 Parameters OK 10:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:18 Set A/D data flow result=40 10:03:18 Set A/D channel type result=40 10:03:18 Set A/D encoding result=40 10:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:18 Set channel filter=0.000000e+000 result=40 10:03:18 Config A/D Result=40 10:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:18 Get A/D filter: -9.255963e+061 result=40 10:03:18 Get A/D value=-858993460 result=40 10:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:18 Parameters OK 10:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:18 Set A/D data flow result=40 10:03:18 Set A/D channel type result=40 10:03:18 Set A/D encoding result=40 10:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:18 Set channel filter=0.000000e+000 result=40 10:03:18 Config A/D Result=40 10:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:18 Get A/D filter: -9.255963e+061 result=40 10:03:18 Get A/D value=-858993460 result=40 10:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:18 Aux= 10:03:18 Message to Camera, serial 112952 queued 10:03:55 Received message from Master: op=PointingHead serial=112965 10:03:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:03:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:03:56 Point started: ret=0 10:03:56 point_skyscan result=0 10:03:56 Check angles 10:03:56 SkyScan query 10:03:57 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 10:03:57 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 10:03:57 Check angles 10:03:57 SkyScan query 10:03:58 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 10:03:58 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 10:03:58 Check angles 10:03:58 SkyScan query 10:03:59 SkyScan query done: ret=0 az=143.97<-9598 ze=38.505<-9433 Statuses=0009 0008 10:03:59 Msec=1500 True Az=143.97 Ze=38.505 Az status=0009 Ze status=0008 10:03:59 Check angles 10:03:59 SkyScan query 10:03:59 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 10:03:59 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 10:03:59 Check angles 10:03:59 SkyScan query 10:04:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:04:00 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:04:00 Check angles 10:04:00 SkyScan query 10:04:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:04:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:04:01 Message to Master queued w/err=0: serial=112965 error=0 10:04:06 Received message from Master: op=Filter serial=112966 10:04:06 Color wheel filter change from 0 to 0 10:04:06 FLIGetFilterPos err=0 currentPosition=0 10:04:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:06 Filter is already there-color wheel unchanged 10:04:06 Received message from Master: op=Shutter serial=112967 10:04:06 Shutter LASER close 10:04:06 Received message from Camera: op=State serial=112969 10:04:06 GetSingleValue result=40 Value=cccccccc 10:04:06 SkyScan query 10:04:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:04:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:07 Parameters OK 10:04:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:07 Set A/D data flow result=40 10:04:07 Set A/D channel type result=40 10:04:07 Set A/D encoding result=40 10:04:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:07 Set channel filter=0.000000e+000 result=40 10:04:07 Config A/D Result=40 10:04:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:07 Get A/D filter: -9.255963e+061 result=40 10:04:07 Get A/D value=-858993460 result=40 10:04:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:07 Parameters OK 10:04:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:07 Set A/D data flow result=40 10:04:07 Set A/D channel type result=40 10:04:07 Set A/D encoding result=40 10:04:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:07 Set channel filter=0.000000e+000 result=40 10:04:07 Config A/D Result=40 10:04:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:07 Get A/D filter: -9.255963e+061 result=40 10:04:07 Get A/D value=-858993460 result=40 10:04:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:07 Aux= 10:04:07 Message to Camera, serial 112969 queued 10:04:43 Received message from Master: op=PointingHead serial=112982 10:04:43 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:04:43 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:04:44 Point started: ret=0 10:04:44 point_skyscan result=0 10:04:44 Check angles 10:04:44 SkyScan query 10:04:45 SkyScan query done: ret=0 az=152.97<-10198 ze=8.7<-11420 Statuses=0009 0009 10:04:45 Msec=0 True Az=152.97 Ze=8.7 Az status=0009 Ze status=0009 10:04:45 Check angles 10:04:45 SkyScan query 10:04:46 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.255<-12817 Statuses=0009 0009 10:04:46 Msec=750 True Az=135.6 Ze=-12.255 Az status=0009 Ze status=0009 10:04:46 Check angles 10:04:46 SkyScan query 10:04:47 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.195<-14213 Statuses=0009 0009 10:04:47 Msec=1500 True Az=118.02 Ze=-33.195 Az status=0009 Ze status=0009 10:04:47 Check angles 10:04:47 SkyScan query 10:04:47 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.525<-15435 Statuses=0009 0009 10:04:47 Msec=2250 True Az=100.62 Ze=-51.525 Az status=0009 Ze status=0009 10:04:47 Check angles 10:04:47 SkyScan query 10:04:48 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:04:48 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:04:48 Check angles 10:04:48 SkyScan query 10:04:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:04:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:04:49 Message to Master queued w/err=0: serial=112982 error=0 10:04:54 Received message from Master: op=Filter serial=112983 10:04:54 Color wheel filter change from 0 to 0 10:04:54 FLIGetFilterPos err=0 currentPosition=0 10:04:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:54 Filter is already there-color wheel unchanged 10:04:54 Received message from Master: op=Shutter serial=112984 10:04:54 Shutter LASER close 10:04:54 Received message from Camera: op=State serial=112986 10:04:54 GetSingleValue result=40 Value=cccccccc 10:04:54 SkyScan query 10:04:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:04:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:55 Parameters OK 10:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:55 Set A/D data flow result=40 10:04:55 Set A/D channel type result=40 10:04:55 Set A/D encoding result=40 10:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:55 Set channel filter=0.000000e+000 result=40 10:04:55 Config A/D Result=40 10:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:55 Get A/D filter: -9.255963e+061 result=40 10:04:55 Get A/D value=-858993460 result=40 10:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:55 Parameters OK 10:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:55 Set A/D data flow result=40 10:04:55 Set A/D channel type result=40 10:04:55 Set A/D encoding result=40 10:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:55 Set channel filter=0.000000e+000 result=40 10:04:55 Config A/D Result=40 10:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:55 Get A/D filter: -9.255963e+061 result=40 10:04:55 Get A/D value=-858993460 result=40 10:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:55 Aux= 10:04:55 Message to Camera, serial 112986 queued 10:05:31 Received message from Master: op=PointingHead serial=112999 10:05:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:05:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:05:32 Point started: ret=0 10:05:32 point_skyscan result=0 10:05:33 Check angles 10:05:33 SkyScan query 10:05:33 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.735<-17449 Statuses=0009 0009 10:05:33 Msec=0 True Az=109.335 Ze=-81.735 Az status=0009 Ze status=0009 10:05:33 Check angles 10:05:33 SkyScan query 10:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.125<-18875 Statuses=0008 0009 10:05:34 Msec=750 True Az=112.995 Ze=-103.125 Az status=0008 Ze status=0009 10:05:34 Check angles 10:05:34 SkyScan query 10:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.065<-20271 Statuses=0008 0009 10:05:35 Msec=1500 True Az=112.995 Ze=-124.065 Az status=0008 Ze status=0009 10:05:35 Check angles 10:05:35 SkyScan query 10:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 10:05:35 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 10:05:36 Check angles 10:05:36 SkyScan query 10:05:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 10:05:36 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 10:05:36 Check angles 10:05:36 SkyScan query 10:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:05:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:05:37 Message to Master queued w/err=0: serial=112999 error=0 10:05:42 Received message from Master: op=Filter serial=113000 10:05:42 Color wheel filter change from 0 to 0 10:05:42 FLIGetFilterPos err=0 currentPosition=0 10:05:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:42 Filter is already there-color wheel unchanged 10:05:42 Received message from Master: op=Shutter serial=113001 10:05:42 Shutter LASER open 10:05:42 Received message from Camera: op=State serial=113003 10:05:42 GetSingleValue result=40 Value=cccccccc 10:05:42 SkyScan query 10:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:05:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:43 Parameters OK 10:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:43 Set A/D data flow result=40 10:05:43 Set A/D channel type result=40 10:05:43 Set A/D encoding result=40 10:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:43 Set channel filter=0.000000e+000 result=40 10:05:43 Config A/D Result=40 10:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:43 Get A/D filter: -9.255963e+061 result=40 10:05:43 Get A/D value=-858993460 result=40 10:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:43 Parameters OK 10:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:43 Set A/D data flow result=40 10:05:43 Set A/D channel type result=40 10:05:43 Set A/D encoding result=40 10:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:43 Set channel filter=0.000000e+000 result=40 10:05:43 Config A/D Result=40 10:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:43 Get A/D filter: -9.255963e+061 result=40 10:05:43 Get A/D value=-858993460 result=40 10:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:43 Aux= 10:05:43 Message to Camera, serial 113003 queued 10:05:51 Received message from Master: op=Shutter serial=113013 10:05:51 Shutter LASER close 10:05:52 Received message from Master: op=PointingHead serial=113017 10:05:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:05:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-13 10:05:52] 10:05:52 Point started: ret=0 10:05:52 point_skyscan result=0 10:05:53 Check angles 10:05:53 SkyScan query 10:05:53 SkyScan query done: ret=0 az=88.515<-5901 ze=155.46<-1636 Statuses=0009 0009 10:05:53 Msec=0 True Az=88.515 Ze=155.46 Az status=0009 Ze status=0009 10:05:54 Check angles 10:05:54 SkyScan query 10:05:54 SkyScan query done: ret=0 az=70.65<-4710 ze=134.085<-3061 Statuses=0009 0009 10:05:54 Msec=750 True Az=70.65 Ze=134.085 Az status=0009 Ze status=0009 10:05:54 Check angles 10:05:54 SkyScan query 10:05:55 SkyScan query done: ret=0 az=52.77<-3518 ze=112.62<-4492 Statuses=0009 0009 10:05:55 Msec=1500 True Az=52.77 Ze=112.62 Az status=0009 Ze status=0009 10:05:55 Check angles 10:05:55 SkyScan query 10:05:56 SkyScan query done: ret=0 az=41.025<-2735 ze=91.695<-5887 Statuses=0008 0009 10:05:56 Msec=2250 True Az=41.025 Ze=91.695 Az status=0008 Ze status=0009 10:05:56 Check angles 10:05:56 SkyScan query 10:05:56 SkyScan query done: ret=0 az=40.995<-2733 ze=70.725<-7285 Statuses=0008 0009 10:05:56 Msec=3000 True Az=40.995 Ze=70.725 Az status=0008 Ze status=0009 10:05:57 Check angles 10:05:57 SkyScan query 10:05:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.63<-8558 Statuses=0008 0009 10:05:57 Msec=3750 True Az=40.995 Ze=51.63 Az status=0008 Ze status=0009 10:05:57 Check angles 10:05:57 SkyScan query 10:05:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:05:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:05:58 Message to Master queued w/err=0: serial=113017 error=0 10:06:03 Received message from Master: op=Filter serial=113018 10:06:03 Color wheel filter change from 0 to 0 10:06:03 FLIGetFilterPos err=0 currentPosition=0 10:06:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:03 Filter is already there-color wheel unchanged 10:06:03 Received message from Master: op=Shutter serial=113019 10:06:03 Shutter LASER close 10:06:03 Received message from Camera: op=State serial=113021 10:06:03 GetSingleValue result=40 Value=cccccccc 10:06:03 SkyScan query 10:06:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:06:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:04 Parameters OK 10:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:04 Set A/D data flow result=40 10:06:04 Set A/D channel type result=40 10:06:04 Set A/D encoding result=40 10:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:04 Set channel filter=0.000000e+000 result=40 10:06:04 Config A/D Result=40 10:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:04 Get A/D filter: -9.255963e+061 result=40 10:06:04 Get A/D value=-858993460 result=40 10:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:04 Parameters OK 10:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:04 Set A/D data flow result=40 10:06:04 Set A/D channel type result=40 10:06:04 Set A/D encoding result=40 10:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:04 Set channel filter=0.000000e+000 result=40 10:06:04 Config A/D Result=40 10:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:04 Get A/D filter: -9.255963e+061 result=40 10:06:04 Get A/D value=-858993460 result=40 10:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:04 Aux= 10:06:04 Message to Camera, serial 113021 queued 10:06:41 Received message from Master: op=PointingHead serial=113034 10:06:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:06:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:06:41 Point started: ret=0 10:06:41 point_skyscan result=0 10:06:42 Check angles 10:06:42 SkyScan query 10:06:42 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 10:06:42 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 10:06:43 Check angles 10:06:43 SkyScan query 10:06:43 SkyScan query done: ret=0 az=81.345<-5423 ze=66.495<-7567 Statuses=0009 0008 10:06:43 Msec=750 True Az=81.345 Ze=66.495 Az status=0009 Ze status=0008 10:06:43 Check angles 10:06:43 SkyScan query 10:06:44 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 10:06:44 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 10:06:44 Check angles 10:06:44 SkyScan query 10:06:45 SkyScan query done: ret=0 az=116.715<-7781 ze=66.495<-7567 Statuses=0009 0008 10:06:45 Msec=2250 True Az=116.715 Ze=66.495 Az status=0009 Ze status=0008 10:06:45 Check angles 10:06:45 SkyScan query 10:06:45 SkyScan query done: ret=0 az=134.115<-8941 ze=66.495<-7567 Statuses=0009 0008 10:06:45 Msec=3000 True Az=134.115 Ze=66.495 Az status=0009 Ze status=0008 10:06:46 Check angles 10:06:46 SkyScan query 10:06:46 SkyScan query done: ret=0 az=151.515<-10101 ze=66.495<-7567 Statuses=0009 0008 10:06:46 Msec=3750 True Az=151.515 Ze=66.495 Az status=0009 Ze status=0008 10:06:46 Check angles 10:06:46 SkyScan query 10:06:47 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:06:47 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:06:47 Message to Master queued w/err=0: serial=113034 error=0 10:06:52 Received message from Master: op=Filter serial=113035 10:06:52 Color wheel filter change from 0 to 0 10:06:52 FLIGetFilterPos err=0 currentPosition=0 10:06:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:52 Filter is already there-color wheel unchanged 10:06:52 Received message from Master: op=Shutter serial=113036 10:06:52 Shutter LASER close 10:06:52 Received message from Camera: op=State serial=113038 10:06:52 GetSingleValue result=40 Value=cccccccc 10:06:52 SkyScan query 10:06:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:06:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:53 Parameters OK 10:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:53 Set A/D data flow result=40 10:06:53 Set A/D channel type result=40 10:06:53 Set A/D encoding result=40 10:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:53 Set channel filter=0.000000e+000 result=40 10:06:53 Config A/D Result=40 10:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:53 Get A/D filter: -9.255963e+061 result=40 10:06:53 Get A/D value=-858993460 result=40 10:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:53 Parameters OK 10:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:53 Set A/D data flow result=40 10:06:53 Set A/D channel type result=40 10:06:53 Set A/D encoding result=40 10:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:53 Set channel filter=0.000000e+000 result=40 10:06:53 Config A/D Result=40 10:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:53 Get A/D filter: -9.255963e+061 result=40 10:06:53 Get A/D value=-858993460 result=40 10:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:53 Aux= 10:06:53 Message to Camera, serial 113038 queued 10:07:29 Received message from Master: op=PointingHead serial=113050 10:07:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:07:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:07:29 Point started: ret=0 10:07:29 point_skyscan result=0 10:07:30 Check angles 10:07:30 SkyScan query 10:07:30 SkyScan query done: ret=0 az=135.27<-9018 ze=36.93<-9538 Statuses=0009 0009 10:07:30 Msec=0 True Az=135.27 Ze=36.93 Az status=0009 Ze status=0009 10:07:30 Check angles 10:07:30 SkyScan query 10:07:31 SkyScan query done: ret=0 az=117.765<-7851 ze=15.96<-10936 Statuses=0009 0009 10:07:31 Msec=750 True Az=117.765 Ze=15.96 Az status=0009 Ze status=0009 10:07:31 Check angles 10:07:31 SkyScan query 10:07:32 SkyScan query done: ret=0 az=100.035<-6669 ze=-5.385<-12359 Statuses=0009 0009 10:07:32 Msec=1500 True Az=100.035 Ze=-5.385 Az status=0009 Ze status=0009 10:07:32 Check angles 10:07:32 SkyScan query 10:07:33 SkyScan query done: ret=0 az=82.545<-5503 ze=-26.325<-13755 Statuses=0009 0009 10:07:33 Msec=2250 True Az=82.545 Ze=-26.325 Az status=0009 Ze status=0009 10:07:33 Check angles 10:07:33 SkyScan query 10:07:33 SkyScan query done: ret=0 az=65.055<-4337 ze=-38.565<-14571 Statuses=0009 0008 10:07:33 Msec=3000 True Az=65.055 Ze=-38.565 Az status=0009 Ze status=0008 10:07:33 Check angles 10:07:33 SkyScan query 10:07:34 SkyScan query done: ret=0 az=47.595<-3173 ze=-38.535<-14569 Statuses=0009 0008 10:07:34 Msec=3750 True Az=47.595 Ze=-38.535 Az status=0009 Ze status=0008 10:07:34 Check angles 10:07:34 SkyScan query 10:07:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:07:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:07:35 Message to Master queued w/err=0: serial=113050 error=0 10:07:40 Received message from Master: op=Filter serial=113051 10:07:40 Color wheel filter change from 0 to 0 10:07:40 FLIGetFilterPos err=0 currentPosition=0 10:07:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:40 Filter is already there-color wheel unchanged 10:07:40 Received message from Master: op=Shutter serial=113052 10:07:40 Shutter LASER close 10:07:40 Received message from Camera: op=State serial=113054 10:07:40 GetSingleValue result=40 Value=cccccccc 10:07:40 SkyScan query 10:07:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:07:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:41 Parameters OK 10:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:41 Set A/D data flow result=40 10:07:41 Set A/D channel type result=40 10:07:41 Set A/D encoding result=40 10:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:41 Set channel filter=0.000000e+000 result=40 10:07:41 Config A/D Result=40 10:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:41 Get A/D filter: -9.255963e+061 result=40 10:07:41 Get A/D value=-858993460 result=40 10:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:41 Parameters OK 10:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:41 Set A/D data flow result=40 10:07:41 Set A/D channel type result=40 10:07:41 Set A/D encoding result=40 10:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:41 Set channel filter=0.000000e+000 result=40 10:07:41 Config A/D Result=40 10:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:41 Get A/D filter: -9.255963e+061 result=40 10:07:41 Get A/D value=-858993460 result=40 10:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:41 Aux= 10:07:41 Message to Camera, serial 113054 queued 10:08:17 Received message from Master: op=PointingHead serial=113067 10:08:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:08:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:08:18 Point started: ret=0 10:08:18 point_skyscan result=0 10:08:18 Check angles 10:08:18 SkyScan query 10:08:19 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.355<-16557 Statuses=0009 0009 10:08:19 Msec=0 True Az=64.08 Ze=-68.355 Az status=0009 Ze status=0009 10:08:19 Check angles 10:08:19 SkyScan query 10:08:20 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.355<-17957 Statuses=0009 0009 10:08:20 Msec=750 True Az=81.6 Ze=-89.355 Az status=0009 Ze status=0009 10:08:20 Check angles 10:08:20 SkyScan query 10:08:21 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.31<-19354 Statuses=0009 0009 10:08:21 Msec=1500 True Az=98.895 Ze=-110.31 Az status=0009 Ze status=0009 10:08:21 Check angles 10:08:21 SkyScan query 10:08:21 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.235<-20749 Statuses=0009 0009 10:08:21 Msec=2250 True Az=116.535 Ze=-131.235 Az status=0009 Ze status=0009 10:08:21 Check angles 10:08:21 SkyScan query 10:08:22 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 10:08:22 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 10:08:22 Check angles 10:08:22 SkyScan query 10:08:23 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:08:23 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:08:23 Message to Master queued w/err=0: serial=113067 error=0 10:08:28 Received message from Master: op=Filter serial=113068 10:08:28 Color wheel filter change from 0 to 0 10:08:28 FLIGetFilterPos err=0 currentPosition=0 10:08:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:28 Filter is already there-color wheel unchanged 10:08:28 Received message from Master: op=Shutter serial=113069 10:08:28 Shutter LASER close 10:08:28 Received message from Camera: op=State serial=113071 10:08:28 GetSingleValue result=40 Value=cccccccc 10:08:28 SkyScan query 10:08:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:08:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:29 Parameters OK 10:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:29 Set A/D data flow result=40 10:08:29 Set A/D channel type result=40 10:08:29 Set A/D encoding result=40 10:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:29 Set channel filter=0.000000e+000 result=40 10:08:29 Config A/D Result=40 10:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:29 Get A/D filter: -9.255963e+061 result=40 10:08:29 Get A/D value=-858993460 result=40 10:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:29 Parameters OK 10:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:29 Set A/D data flow result=40 10:08:29 Set A/D channel type result=40 10:08:29 Set A/D encoding result=40 10:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:29 Set channel filter=0.000000e+000 result=40 10:08:29 Config A/D Result=40 10:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:29 Get A/D filter: -9.255963e+061 result=40 10:08:29 Get A/D value=-858993460 result=40 10:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:29 Aux= 10:08:29 Message to Camera, serial 113071 queued 10:09:05 Received message from Master: op=PointingHead serial=113084 10:09:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:09:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:09:06 Point started: ret=0 10:09:06 point_skyscan result=0 10:09:07 Check angles 10:09:07 SkyScan query 10:09:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 10:09:07 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 10:09:07 Check angles 10:09:07 SkyScan query 10:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:09:08 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:09:08 Message to Master queued w/err=0: serial=113084 error=0 10:09:13 Received message from Master: op=Filter serial=113085 10:09:13 Color wheel filter change from 0 to 0 10:09:13 FLIGetFilterPos err=0 currentPosition=0 10:09:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:13 Filter is already there-color wheel unchanged 10:09:13 Received message from Master: op=Shutter serial=113086 10:09:13 Shutter LASER open 10:09:13 Received message from Camera: op=State serial=113088 10:09:13 GetSingleValue result=40 Value=cccccccc 10:09:13 SkyScan query 10:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:09:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:14 Parameters OK 10:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:14 Set A/D data flow result=40 10:09:14 Set A/D channel type result=40 10:09:14 Set A/D encoding result=40 10:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:14 Set channel filter=0.000000e+000 result=40 10:09:14 Config A/D Result=40 10:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:14 Get A/D filter: -9.255963e+061 result=40 10:09:14 Get A/D value=-858993460 result=40 10:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:14 Parameters OK 10:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:14 Set A/D data flow result=40 10:09:14 Set A/D channel type result=40 10:09:14 Set A/D encoding result=40 10:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:14 Set channel filter=0.000000e+000 result=40 10:09:14 Config A/D Result=40 10:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:14 Get A/D filter: -9.255963e+061 result=40 10:09:14 Get A/D value=-858993460 result=40 10:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:14 Aux= 10:09:14 Message to Camera, serial 113088 queued 10:09:22 Received message from Master: op=Shutter serial=113098 10:09:22 Shutter LASER close 10:09:23 Received message from Master: op=PointingHead serial=113102 10:09:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:09:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:09:23 Point started: ret=0 10:09:23 point_skyscan result=0 10:09:24 Check angles 10:09:24 SkyScan query 10:09:24 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.16<-21544 Statuses=0009 0009 10:09:24 Msec=0 True Az=135.96 Ze=-143.16 Az status=0009 Ze status=0009 10:09:25 Check angles 10:09:25 SkyScan query 10:09:25 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.19<-20146 Statuses=0009 0009 10:09:25 Msec=750 True Az=153.585 Ze=-122.19 Az status=0009 Ze status=0009 10:09:25 Check angles 10:09:25 SkyScan query 10:09:26 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.28<-18752 Statuses=0009 0009 10:09:26 Msec=1500 True Az=170.97 Ze=-101.28 Az status=0009 Ze status=0009 10:09:26 Check angles 10:09:26 SkyScan query 10:09:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.31<-17354 Statuses=0008 0009 10:09:27 Msec=2250 True Az=176.01 Ze=-80.31 Az status=0008 Ze status=0009 10:09:27 Check angles 10:09:27 SkyScan query 10:09:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.355<-15957 Statuses=0008 0009 10:09:27 Msec=3000 True Az=176.01 Ze=-59.355 Az status=0008 Ze status=0009 10:09:28 Check angles 10:09:28 SkyScan query 10:09:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:09:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:09:28 Message to Master queued w/err=0: serial=113102 error=0 10:09:33 Received message from Master: op=Filter serial=113103 10:09:33 Color wheel filter change from 0 to 0 10:09:33 FLIGetFilterPos err=0 currentPosition=0 10:09:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:33 Filter is already there-color wheel unchanged 10:09:33 Received message from Master: op=Shutter serial=113104 10:09:33 Shutter LASER close 10:09:34 Received message from Camera: op=State serial=113106 10:09:34 GetSingleValue result=40 Value=cccccccc 10:09:34 SkyScan query 10:09:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:09:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:34 Parameters OK 10:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:34 Set A/D data flow result=40 10:09:34 Set A/D channel type result=40 10:09:34 Set A/D encoding result=40 10:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:34 Set channel filter=0.000000e+000 result=40 10:09:34 Config A/D Result=40 10:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:34 Get A/D filter: -9.255963e+061 result=40 10:09:34 Get A/D value=-858993460 result=40 10:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:34 Parameters OK 10:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:34 Set A/D data flow result=40 10:09:34 Set A/D channel type result=40 10:09:34 Set A/D encoding result=40 10:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:34 Set channel filter=0.000000e+000 result=40 10:09:34 Config A/D Result=40 10:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:34 Get A/D filter: -9.255963e+061 result=40 10:09:34 Get A/D value=-858993460 result=40 10:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:34 Aux= 10:09:34 Message to Camera, serial 113106 queued 10:10:11 Received message from Master: op=PointingHead serial=113119 10:10:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:10:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:10:11 Point started: ret=0 10:10:11 point_skyscan result=0 10:10:12 Check angles 10:10:12 SkyScan query 10:10:13 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.615<-13441 Statuses=0009 0009 10:10:13 Msec=0 True Az=152.76 Ze=-21.615 Az status=0009 Ze status=0009 10:10:13 Check angles 10:10:13 SkyScan query 10:10:13 SkyScan query done: ret=0 az=135.33<-9022 ze=-0.615<-12041 Statuses=0009 0009 10:10:13 Msec=750 True Az=135.33 Ze=-0.615 Az status=0009 Ze status=0009 10:10:14 Check angles 10:10:14 SkyScan query 10:10:14 SkyScan query done: ret=0 az=117.45<-7830 ze=20.76<-10616 Statuses=0009 0009 10:10:14 Msec=1500 True Az=117.45 Ze=20.76 Az status=0009 Ze status=0009 10:10:14 Check angles 10:10:14 SkyScan query 10:10:15 SkyScan query done: ret=0 az=100.11<-6674 ze=41.73<-9218 Statuses=0009 0009 10:10:15 Msec=2250 True Az=100.11 Ze=41.73 Az status=0009 Ze status=0009 10:10:15 Check angles 10:10:15 SkyScan query 10:10:16 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 10:10:16 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 10:10:16 Check angles 10:10:16 SkyScan query 10:10:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:10:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:10:16 Message to Master queued w/err=0: serial=113119 error=0 10:10:21 Received message from Master: op=Filter serial=113120 10:10:21 Color wheel filter change from 0 to 0 10:10:21 FLIGetFilterPos err=0 currentPosition=0 10:10:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:21 Filter is already there-color wheel unchanged 10:10:22 Received message from Master: op=Shutter serial=113121 10:10:22 Shutter LASER close 10:10:22 Received message from Camera: op=State serial=113123 10:10:22 GetSingleValue result=40 Value=cccccccc 10:10:22 SkyScan query 10:10:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:10:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:22 Parameters OK 10:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:22 Set A/D data flow result=40 10:10:22 Set A/D channel type result=40 10:10:22 Set A/D encoding result=40 10:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:22 Set channel filter=0.000000e+000 result=40 10:10:22 Config A/D Result=40 10:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:22 Get A/D filter: -9.255963e+061 result=40 10:10:22 Get A/D value=-858993460 result=40 10:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:22 Parameters OK 10:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:22 Set A/D data flow result=40 10:10:22 Set A/D channel type result=40 10:10:22 Set A/D encoding result=40 10:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:22 Set channel filter=0.000000e+000 result=40 10:10:22 Config A/D Result=40 10:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:22 Get A/D filter: -9.255963e+061 result=40 10:10:22 Get A/D value=-858993460 result=40 10:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:22 Aux= 10:10:22 Message to Camera, serial 113123 queued 10:10:59 Received message from Master: op=PointingHead serial=113136 10:10:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:10:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:10:59 Point started: ret=0 10:10:59 point_skyscan result=0 10:11:00 Check angles 10:11:00 SkyScan query 10:11:01 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 10:11:01 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 10:11:01 Check angles 10:11:01 SkyScan query 10:11:01 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 10:11:01 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 10:11:02 Check angles 10:11:02 SkyScan query 10:11:02 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 10:11:02 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 10:11:02 Check angles 10:11:02 SkyScan query 10:11:03 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 10:11:03 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 10:11:03 Check angles 10:11:03 SkyScan query 10:11:04 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:11:04 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:11:04 Check angles 10:11:04 SkyScan query 10:11:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:11:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:11:04 Message to Master queued w/err=0: serial=113136 error=0 10:11:09 Received message from Master: op=Filter serial=113137 10:11:09 Color wheel filter change from 0 to 0 10:11:09 FLIGetFilterPos err=0 currentPosition=0 10:11:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:09 Filter is already there-color wheel unchanged 10:11:10 Received message from Master: op=Shutter serial=113138 10:11:10 Shutter LASER close 10:11:10 Received message from Camera: op=State serial=113140 10:11:10 GetSingleValue result=40 Value=cccccccc 10:11:10 SkyScan query 10:11:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:10 Parameters OK 10:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:10 Set A/D data flow result=40 10:11:10 Set A/D channel type result=40 10:11:10 Set A/D encoding result=40 10:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:10 Set channel filter=0.000000e+000 result=40 10:11:10 Config A/D Result=40 10:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:10 Get A/D filter: -9.255963e+061 result=40 10:11:10 Get A/D value=-858993460 result=40 10:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:10 Parameters OK 10:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:10 Set A/D data flow result=40 10:11:10 Set A/D channel type result=40 10:11:10 Set A/D encoding result=40 10:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:10 Set channel filter=0.000000e+000 result=40 10:11:10 Config A/D Result=40 10:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:10 Get A/D filter: -9.255963e+061 result=40 10:11:10 Get A/D value=-858993460 result=40 10:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:10 Aux= 10:11:10 Message to Camera, serial 113140 queued 10:11:47 Received message from Master: op=PointingHead serial=113153 10:11:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:11:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:11:48 Point started: ret=0 10:11:48 point_skyscan result=0 10:11:48 Check angles 10:11:48 SkyScan query 10:11:49 SkyScan query done: ret=0 az=152.76<-10184 ze=8.34<-11444 Statuses=0009 0009 10:11:49 Msec=0 True Az=152.76 Ze=8.34 Az status=0009 Ze status=0009 10:11:49 Check angles 10:11:49 SkyScan query 10:11:50 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.57<-12838 Statuses=0009 0009 10:11:50 Msec=750 True Az=135.285 Ze=-12.57 Az status=0009 Ze status=0009 10:11:50 Check angles 10:11:50 SkyScan query 10:11:50 SkyScan query done: ret=0 az=117.39<-7826 ze=-34.02<-14268 Statuses=0009 0009 10:11:50 Msec=1500 True Az=117.39 Ze=-34.02 Az status=0009 Ze status=0009 10:11:51 Check angles 10:11:51 SkyScan query 10:11:51 SkyScan query done: ret=0 az=100.005<-6667 ze=-51.57<-15438 Statuses=0009 0009 10:11:51 Msec=2250 True Az=100.005 Ze=-51.57 Az status=0009 Ze status=0009 10:11:51 Check angles 10:11:51 SkyScan query 10:11:52 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:11:52 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:11:52 Check angles 10:11:52 SkyScan query 10:11:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:11:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:11:53 Message to Master queued w/err=0: serial=113153 error=0 10:11:58 Received message from Master: op=Filter serial=113154 10:11:58 Color wheel filter change from 0 to 0 10:11:58 FLIGetFilterPos err=0 currentPosition=0 10:11:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:58 Filter is already there-color wheel unchanged 10:11:58 Received message from Master: op=Shutter serial=113155 10:11:58 Shutter LASER close 10:11:58 Received message from Camera: op=State serial=113157 10:11:58 GetSingleValue result=40 Value=cccccccc 10:11:58 SkyScan query 10:11:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:11:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:58 Parameters OK 10:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:58 Set A/D data flow result=40 10:11:58 Set A/D channel type result=40 10:11:58 Set A/D encoding result=40 10:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:58 Set channel filter=0.000000e+000 result=40 10:11:58 Config A/D Result=40 10:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:58 Get A/D filter: -9.255963e+061 result=40 10:11:58 Get A/D value=-858993460 result=40 10:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:58 Parameters OK 10:11:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:58 Set A/D data flow result=40 10:11:58 Set A/D channel type result=40 10:11:58 Set A/D encoding result=40 10:11:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:58 Set channel filter=0.000000e+000 result=40 10:11:58 Config A/D Result=40 10:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:58 Get A/D filter: -9.255963e+061 result=40 10:11:58 Get A/D value=-858993460 result=40 10:11:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:58 Aux= 10:11:58 Message to Camera, serial 113157 queued 10:12:35 Received message from Master: op=PointingHead serial=113170 10:12:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:12:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:12:36 Point started: ret=0 10:12:36 point_skyscan result=0 10:12:36 Check angles 10:12:36 SkyScan query 10:12:37 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.03<-17402 Statuses=0009 0009 10:12:37 Msec=0 True Az=108.84 Ze=-81.03 Az status=0009 Ze status=0009 10:12:37 Check angles 10:12:37 SkyScan query 10:12:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 10:12:38 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 10:12:38 Check angles 10:12:38 SkyScan query 10:12:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 10:12:38 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 10:12:39 Check angles 10:12:39 SkyScan query 10:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.895<-21593 Statuses=0008 0009 10:12:39 Msec=2250 True Az=112.995 Ze=-143.895 Az status=0008 Ze status=0009 10:12:39 Check angles 10:12:39 SkyScan query 10:12:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.865<-22991 Statuses=0008 0009 10:12:40 Msec=3000 True Az=112.995 Ze=-164.865 Az status=0008 Ze status=0009 10:12:40 Check angles 10:12:40 SkyScan query 10:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:12:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:12:41 Message to Master queued w/err=0: serial=113170 error=0 10:12:46 Received message from Master: op=Filter serial=113171 10:12:46 Color wheel filter change from 0 to 0 10:12:46 FLIGetFilterPos err=0 currentPosition=0 10:12:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:46 Filter is already there-color wheel unchanged 10:12:46 Received message from Master: op=Shutter serial=113172 10:12:46 Shutter LASER open 10:12:46 Received message from Camera: op=State serial=113174 10:12:46 GetSingleValue result=40 Value=cccccccc 10:12:46 SkyScan query 10:12:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:12:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:47 Parameters OK 10:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:47 Set A/D data flow result=40 10:12:47 Set A/D channel type result=40 10:12:47 Set A/D encoding result=40 10:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:47 Set channel filter=0.000000e+000 result=40 10:12:47 Config A/D Result=40 10:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:47 Get A/D filter: -9.255963e+061 result=40 10:12:47 Get A/D value=-858993460 result=40 10:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:47 Parameters OK 10:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:47 Set A/D data flow result=40 10:12:47 Set A/D channel type result=40 10:12:47 Set A/D encoding result=40 10:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:47 Set channel filter=0.000000e+000 result=40 10:12:47 Config A/D Result=40 10:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:47 Get A/D filter: -9.255963e+061 result=40 10:12:47 Get A/D value=-858993460 result=40 10:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:47 Aux= 10:12:47 Message to Camera, serial 113174 queued 10:12:55 Received message from Master: op=Shutter serial=113184 10:12:55 Shutter LASER close 10:12:56 Received message from Master: op=PointingHead serial=113188 10:12:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:12:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:12:56 Point started: ret=0 10:12:56 point_skyscan result=0 10:12:57 Check angles 10:12:57 SkyScan query 10:12:57 SkyScan query done: ret=0 az=89.85<-5990 ze=157.32<-1512 Statuses=0009 0009 10:12:57 Msec=0 True Az=89.85 Ze=157.32 Az status=0009 Ze status=0009 10:12:57 Check angles 10:12:57 SkyScan query 10:12:58 SkyScan query done: ret=0 az=72.51<-4834 ze=136.35<-2910 Statuses=0009 0009 10:12:58 Msec=750 True Az=72.51 Ze=136.35 Az status=0009 Ze status=0009 10:12:58 Check angles 10:12:58 SkyScan query 10:12:59 SkyScan query done: ret=0 az=54.735<-3649 ze=114.975<-4335 Statuses=0009 0009 10:12:59 Msec=1500 True Az=54.735 Ze=114.975 Az status=0009 Ze status=0009 10:12:59 Check angles 10:12:59 SkyScan query 10:12:59 SkyScan query done: ret=0 az=40.95<-2730 ze=93.57<-5762 Statuses=0009 0009 10:12:59 Msec=2250 True Az=40.95 Ze=93.57 Az status=0009 Ze status=0009 10:13:00 Check angles 10:13:00 SkyScan query 10:13:00 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 10:13:00 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 10:13:00 Check angles 10:13:00 SkyScan query 10:13:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 10:13:01 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 10:13:01 Check angles 10:13:01 SkyScan query 10:13:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:13:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:13:02 Message to Master queued w/err=0: serial=113188 error=0 10:13:07 Received message from Master: op=Filter serial=113189 10:13:07 Color wheel filter change from 0 to 0 10:13:07 FLIGetFilterPos err=0 currentPosition=0 10:13:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:07 Filter is already there-color wheel unchanged 10:13:07 Received message from Master: op=Shutter serial=113190 10:13:07 Shutter LASER close 10:13:07 Received message from Camera: op=State serial=113192 10:13:07 GetSingleValue result=40 Value=cccccccc 10:13:07 SkyScan query 10:13:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:13:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:08 Parameters OK 10:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:08 Set A/D data flow result=40 10:13:08 Set A/D channel type result=40 10:13:08 Set A/D encoding result=40 10:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:08 Set channel filter=0.000000e+000 result=40 10:13:08 Config A/D Result=40 10:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:08 Get A/D filter: -9.255963e+061 result=40 10:13:08 Get A/D value=-858993460 result=40 10:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:08 Parameters OK 10:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:08 Set A/D data flow result=40 10:13:08 Set A/D channel type result=40 10:13:08 Set A/D encoding result=40 10:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:08 Set channel filter=0.000000e+000 result=40 10:13:08 Config A/D Result=40 10:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:08 Get A/D filter: -9.255963e+061 result=40 10:13:08 Get A/D value=-858993460 result=40 10:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:08 Aux= 10:13:08 Message to Camera, serial 113192 queued 10:13:44 Received message from Master: op=PointingHead serial=113205 10:13:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:13:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:13:45 Point started: ret=0 10:13:45 point_skyscan result=0 10:13:46 Check angles 10:13:46 SkyScan query 10:13:46 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 10:13:46 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 10:13:46 Check angles 10:13:46 SkyScan query 10:13:47 SkyScan query done: ret=0 az=81.33<-5422 ze=66.495<-7567 Statuses=0009 0008 10:13:47 Msec=750 True Az=81.33 Ze=66.495 Az status=0009 Ze status=0008 10:13:47 Check angles 10:13:47 SkyScan query 10:13:48 SkyScan query done: ret=0 az=98.745<-6583 ze=66.495<-7567 Statuses=0009 0008 10:13:48 Msec=1500 True Az=98.745 Ze=66.495 Az status=0009 Ze status=0008 10:13:48 Check angles 10:13:48 SkyScan query 10:13:48 SkyScan query done: ret=0 az=116.115<-7741 ze=66.495<-7567 Statuses=0009 0008 10:13:48 Msec=2250 True Az=116.115 Ze=66.495 Az status=0009 Ze status=0008 10:13:49 Check angles 10:13:49 SkyScan query 10:13:49 SkyScan query done: ret=0 az=133.56<-8904 ze=66.495<-7567 Statuses=0009 0008 10:13:49 Msec=3000 True Az=133.56 Ze=66.495 Az status=0009 Ze status=0008 10:13:49 Check angles 10:13:49 SkyScan query 10:13:50 SkyScan query done: ret=0 az=151.11<-10074 ze=66.495<-7567 Statuses=0009 0008 10:13:50 Msec=3750 True Az=151.11 Ze=66.495 Az status=0009 Ze status=0008 10:13:50 Check angles 10:13:50 SkyScan query 10:13:51 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:13:51 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:13:51 Message to Master queued w/err=0: serial=113205 error=0 10:13:56 Received message from Master: op=Filter serial=113206 10:13:56 Color wheel filter change from 0 to 0 10:13:56 FLIGetFilterPos err=0 currentPosition=0 10:13:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:56 Filter is already there-color wheel unchanged 10:13:56 Received message from Master: op=Shutter serial=113207 10:13:56 Shutter LASER close 10:13:56 Received message from Camera: op=State serial=113209 10:13:56 GetSingleValue result=40 Value=cccccccc 10:13:56 SkyScan query 10:13:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:13:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:56 Parameters OK 10:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:56 Set A/D data flow result=40 10:13:56 Set A/D channel type result=40 10:13:56 Set A/D encoding result=40 10:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:56 Set channel filter=0.000000e+000 result=40 10:13:56 Config A/D Result=40 10:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:56 Get A/D filter: -9.255963e+061 result=40 10:13:56 Get A/D value=-858993460 result=40 10:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:56 Parameters OK 10:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:56 Set A/D data flow result=40 10:13:56 Set A/D channel type result=40 10:13:56 Set A/D encoding result=40 10:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:56 Set channel filter=0.000000e+000 result=40 10:13:56 Config A/D Result=40 10:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:56 Get A/D filter: -9.255963e+061 result=40 10:13:56 Get A/D value=-858993460 result=40 10:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:56 Aux= 10:13:56 Message to Camera, serial 113209 queued 10:14:33 Received message from Master: op=PointingHead serial=113222 10:14:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:14:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:14:34 Point started: ret=0 10:14:34 point_skyscan result=0 10:14:34 Check angles 10:14:34 SkyScan query 10:14:35 SkyScan query done: ret=0 az=134.745<-8983 ze=36.45<-9570 Statuses=0009 0009 10:14:35 Msec=0 True Az=134.745 Ze=36.45 Az status=0009 Ze status=0009 10:14:35 Check angles 10:14:35 SkyScan query 10:14:36 SkyScan query done: ret=0 az=116.895<-7793 ze=15.09<-10994 Statuses=0009 0009 10:14:36 Msec=750 True Az=116.895 Ze=15.09 Az status=0009 Ze status=0009 10:14:36 Check angles 10:14:36 SkyScan query 10:14:36 SkyScan query done: ret=0 az=99.51<-6634 ze=-5.895<-12393 Statuses=0009 0009 10:14:36 Msec=1500 True Az=99.51 Ze=-5.895 Az status=0009 Ze status=0009 10:14:37 Check angles 10:14:37 SkyScan query 10:14:37 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.85<-13790 Statuses=0009 0009 10:14:37 Msec=2250 True Az=82.035 Ze=-26.85 Az status=0009 Ze status=0009 10:14:37 Check angles 10:14:37 SkyScan query 10:14:38 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.565<-14571 Statuses=0009 0008 10:14:38 Msec=3000 True Az=64.545 Ze=-38.565 Az status=0009 Ze status=0008 10:14:38 Check angles 10:14:38 SkyScan query 10:14:39 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.535<-14569 Statuses=0009 0008 10:14:39 Msec=3750 True Az=47.07 Ze=-38.535 Az status=0009 Ze status=0008 10:14:39 Check angles 10:14:39 SkyScan query 10:14:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:14:39 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:14:39 Message to Master queued w/err=0: serial=113222 error=0 10:14:44 Received message from Master: op=Filter serial=113223 10:14:44 Color wheel filter change from 0 to 0 10:14:44 FLIGetFilterPos err=0 currentPosition=0 10:14:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:44 Filter is already there-color wheel unchanged 10:14:45 Received message from Master: op=Shutter serial=113224 10:14:45 Shutter LASER close 10:14:45 Received message from Camera: op=State serial=113226 10:14:45 GetSingleValue result=40 Value=cccccccc 10:14:45 SkyScan query 10:14:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:14:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:45 Parameters OK 10:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:45 Set A/D data flow result=40 10:14:45 Set A/D channel type result=40 10:14:45 Set A/D encoding result=40 10:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:45 Set channel filter=0.000000e+000 result=40 10:14:45 Config A/D Result=40 10:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:45 Get A/D filter: -9.255963e+061 result=40 10:14:45 Get A/D value=-858993460 result=40 10:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:45 Parameters OK 10:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:45 Set A/D data flow result=40 10:14:45 Set A/D channel type result=40 10:14:45 Set A/D encoding result=40 10:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:45 Set channel filter=0.000000e+000 result=40 10:14:45 Config A/D Result=40 10:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:45 Get A/D filter: -9.255963e+061 result=40 10:14:45 Get A/D value=-858993460 result=40 10:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:45 Aux= 10:14:45 Message to Camera, serial 113226 queued 10:15:22 Received message from Master: op=PointingHead serial=113239 10:15:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:15:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:15:22 Point started: ret=0 10:15:22 point_skyscan result=0 10:15:23 Check angles 10:15:23 SkyScan query 10:15:24 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.835<-16589 Statuses=0009 0009 10:15:24 Msec=0 True Az=64.425 Ze=-68.835 Az status=0009 Ze status=0009 10:15:24 Check angles 10:15:24 SkyScan query 10:15:25 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.805<-17987 Statuses=0009 0009 10:15:25 Msec=750 True Az=81.855 Ze=-89.805 Az status=0009 Ze status=0009 10:15:25 Check angles 10:15:25 SkyScan query 10:15:25 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.775<-19385 Statuses=0009 0009 10:15:25 Msec=1500 True Az=99.36 Ze=-110.775 Az status=0009 Ze status=0009 10:15:25 Check angles 10:15:25 SkyScan query 10:15:26 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.685<-20779 Statuses=0009 0009 10:15:26 Msec=2250 True Az=116.91 Ze=-131.685 Az status=0009 Ze status=0009 10:15:26 Check angles 10:15:26 SkyScan query 10:15:27 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 10:15:27 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 10:15:27 Received message from Master: op=Identify serial=113240 10:15:27 Check angles 10:15:27 SkyScan query 10:15:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:15:28 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:15:28 Message to Master queued w/err=0: serial=113239 error=0 10:15:33 Received message from Master: op=Filter serial=113243 10:15:33 Color wheel filter change from 0 to 0 10:15:33 FLIGetFilterPos err=0 currentPosition=0 10:15:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:33 Filter is already there-color wheel unchanged 10:15:33 Received message from Master: op=Shutter serial=113244 10:15:33 Shutter LASER close 10:15:33 Received message from Camera: op=State serial=113246 10:15:33 GetSingleValue result=40 Value=cccccccc 10:15:33 SkyScan query 10:15:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:15:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:33 Parameters OK 10:15:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:33 Set A/D data flow result=40 10:15:33 Set A/D channel type result=40 10:15:33 Set A/D encoding result=40 10:15:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:33 Set channel filter=0.000000e+000 result=40 10:15:33 Config A/D Result=40 10:15:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:33 Get A/D filter: -9.255963e+061 result=40 10:15:33 Get A/D value=-858993460 result=40 10:15:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:33 Parameters OK 10:15:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:33 Set A/D data flow result=40 10:15:33 Set A/D channel type result=40 10:15:33 Set A/D encoding result=40 10:15:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:33 Set channel filter=0.000000e+000 result=40 10:15:33 Config A/D Result=40 10:15:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:33 Get A/D filter: -9.255963e+061 result=40 10:15:33 Get A/D value=-858993460 result=40 [UTC 2018-12-13 10:15:33] 10:15:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:33 Aux= 10:15:33 Message to Camera, serial 113246 queued [UTC 2018-12-13 10:15:52] 10:16:10 Received message from Master: op=PointingHead serial=113259 10:16:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:16:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:16:11 Point started: ret=0 10:16:11 point_skyscan result=0 10:16:11 Check angles 10:16:11 SkyScan query 10:16:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 10:16:12 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 10:16:12 Check angles 10:16:12 SkyScan query 10:16:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:16:13 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:16:13 Message to Master queued w/err=0: serial=113259 error=0 10:16:18 Received message from Master: op=Filter serial=113260 10:16:18 Color wheel filter change from 0 to 0 10:16:18 FLIGetFilterPos err=0 currentPosition=0 10:16:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:18 Filter is already there-color wheel unchanged 10:16:18 Received message from Master: op=Shutter serial=113261 10:16:18 Shutter LASER open 10:16:18 Received message from Camera: op=State serial=113263 10:16:18 GetSingleValue result=40 Value=cccccccc 10:16:18 SkyScan query 10:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:16:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:19 Parameters OK 10:16:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:19 Set A/D data flow result=40 10:16:19 Set A/D channel type result=40 10:16:19 Set A/D encoding result=40 10:16:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:19 Set channel filter=0.000000e+000 result=40 10:16:19 Config A/D Result=40 10:16:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:19 Get A/D filter: -9.255963e+061 result=40 10:16:19 Get A/D value=-858993460 result=40 10:16:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:19 Parameters OK 10:16:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:19 Set A/D data flow result=40 10:16:19 Set A/D channel type result=40 10:16:19 Set A/D encoding result=40 10:16:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:19 Set channel filter=0.000000e+000 result=40 10:16:19 Config A/D Result=40 10:16:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:19 Get A/D filter: -9.255963e+061 result=40 10:16:19 Get A/D value=-858993460 result=40 10:16:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:19 Aux= 10:16:19 Message to Camera, serial 113263 queued 10:16:27 Received message from Master: op=Shutter serial=113273 10:16:27 Shutter LASER close 10:16:28 Received message from Master: op=PointingHead serial=113277 10:16:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:16:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:16:28 Point started: ret=0 10:16:28 point_skyscan result=0 10:16:29 Check angles 10:16:29 SkyScan query 10:16:29 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.845<-21523 Statuses=0009 0009 10:16:29 Msec=0 True Az=136.155 Ze=-142.845 Az status=0009 Ze status=0009 10:16:30 Check angles 10:16:30 SkyScan query 10:16:30 SkyScan query done: ret=0 az=154.065<-10271 ze=-121.575<-20105 Statuses=0009 0009 10:16:30 Msec=750 True Az=154.065 Ze=-121.575 Az status=0009 Ze status=0009 10:16:30 Check angles 10:16:30 SkyScan query 10:16:31 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.56<-18704 Statuses=0009 0009 10:16:31 Msec=1500 True Az=171.555 Ze=-100.56 Az status=0009 Ze status=0009 10:16:31 Check angles 10:16:31 SkyScan query 10:16:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 10:16:32 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 10:16:32 Check angles 10:16:32 SkyScan query 10:16:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 10:16:32 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 10:16:33 Check angles 10:16:33 SkyScan query 10:16:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:16:33 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:16:33 Message to Master queued w/err=0: serial=113277 error=0 10:16:38 Received message from Master: op=Filter serial=113278 10:16:38 Color wheel filter change from 0 to 0 10:16:38 FLIGetFilterPos err=0 currentPosition=0 10:16:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:38 Filter is already there-color wheel unchanged 10:16:38 Received message from Master: op=Shutter serial=113279 10:16:38 Shutter LASER close 10:16:38 Received message from Camera: op=State serial=113281 10:16:38 GetSingleValue result=40 Value=cccccccc 10:16:38 SkyScan query 10:16:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:16:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:39 Parameters OK 10:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:39 Set A/D data flow result=40 10:16:39 Set A/D channel type result=40 10:16:39 Set A/D encoding result=40 10:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:39 Set channel filter=0.000000e+000 result=40 10:16:39 Config A/D Result=40 10:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:39 Get A/D filter: -9.255963e+061 result=40 10:16:39 Get A/D value=-858993460 result=40 10:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:39 Parameters OK 10:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:39 Set A/D data flow result=40 10:16:39 Set A/D channel type result=40 10:16:39 Set A/D encoding result=40 10:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:39 Set channel filter=0.000000e+000 result=40 10:16:39 Config A/D Result=40 10:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:39 Get A/D filter: -9.255963e+061 result=40 10:16:39 Get A/D value=-858993460 result=40 10:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:39 Aux= 10:16:39 Message to Camera, serial 113281 queued 10:17:16 Received message from Master: op=PointingHead serial=113294 10:17:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:17:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:17:16 Point started: ret=0 10:17:16 point_skyscan result=0 10:17:17 Check angles 10:17:17 SkyScan query 10:17:18 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.645<-13443 Statuses=0009 0009 10:17:18 Msec=0 True Az=152.94 Ze=-21.645 Az status=0009 Ze status=0009 10:17:18 Check angles 10:17:18 SkyScan query 10:17:18 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.63<-12042 Statuses=0009 0009 10:17:18 Msec=750 True Az=135.45 Ze=-0.63 Az status=0009 Ze status=0009 10:17:18 Check angles 10:17:18 SkyScan query 10:17:19 SkyScan query done: ret=0 az=117.81<-7854 ze=20.28<-10648 Statuses=0009 0009 10:17:19 Msec=1500 True Az=117.81 Ze=20.28 Az status=0009 Ze status=0009 10:17:19 Check angles 10:17:19 SkyScan query 10:17:20 SkyScan query done: ret=0 az=100.575<-6705 ze=41.28<-9248 Statuses=0009 0009 10:17:20 Msec=2250 True Az=100.575 Ze=41.28 Az status=0009 Ze status=0009 10:17:20 Check angles 10:17:20 SkyScan query 10:17:21 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 10:17:21 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 10:17:21 Check angles 10:17:21 SkyScan query 10:17:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:17:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:17:21 Message to Master queued w/err=0: serial=113294 error=0 10:17:26 Received message from Master: op=Filter serial=113295 10:17:26 Color wheel filter change from 0 to 0 10:17:26 FLIGetFilterPos err=0 currentPosition=0 10:17:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:26 Filter is already there-color wheel unchanged 10:17:26 Received message from Master: op=Shutter serial=113296 10:17:26 Shutter LASER close 10:17:26 Received message from Camera: op=State serial=113298 10:17:26 GetSingleValue result=40 Value=cccccccc 10:17:26 SkyScan query 10:17:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:17:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:27 Parameters OK 10:17:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:27 Set A/D data flow result=40 10:17:27 Set A/D channel type result=40 10:17:27 Set A/D encoding result=40 10:17:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:27 Set channel filter=0.000000e+000 result=40 10:17:27 Config A/D Result=40 10:17:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:27 Get A/D filter: -9.255963e+061 result=40 10:17:27 Get A/D value=-858993460 result=40 10:17:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:27 Parameters OK 10:17:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:27 Set A/D data flow result=40 10:17:27 Set A/D channel type result=40 10:17:27 Set A/D encoding result=40 10:17:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:27 Set channel filter=0.000000e+000 result=40 10:17:27 Config A/D Result=40 10:17:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:27 Get A/D filter: -9.255963e+061 result=40 10:17:27 Get A/D value=-858993460 result=40 10:17:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:27 Aux= 10:17:27 Message to Camera, serial 113298 queued 10:18:04 Received message from Master: op=PointingHead serial=113311 10:18:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:18:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:18:04 Point started: ret=0 10:18:04 point_skyscan result=0 10:18:05 Check angles 10:18:05 SkyScan query 10:18:06 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 10:18:06 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 10:18:06 Check angles 10:18:06 SkyScan query 10:18:06 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 10:18:06 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 10:18:06 Check angles 10:18:06 SkyScan query 10:18:07 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 10:18:07 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 10:18:07 Check angles 10:18:07 SkyScan query 10:18:08 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 10:18:08 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 10:18:08 Check angles 10:18:08 SkyScan query 10:18:09 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:18:09 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:18:09 Check angles 10:18:09 SkyScan query 10:18:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:18:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:18:09 Message to Master queued w/err=0: serial=113311 error=0 10:18:14 Received message from Master: op=Filter serial=113312 10:18:14 Color wheel filter change from 0 to 0 10:18:14 FLIGetFilterPos err=0 currentPosition=0 10:18:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:14 Filter is already there-color wheel unchanged 10:18:14 Received message from Master: op=Shutter serial=113313 10:18:14 Shutter LASER close 10:18:15 Received message from Camera: op=State serial=113315 10:18:15 GetSingleValue result=40 Value=cccccccc 10:18:15 SkyScan query 10:18:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:18:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:15 Parameters OK 10:18:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:15 Set A/D data flow result=40 10:18:15 Set A/D channel type result=40 10:18:15 Set A/D encoding result=40 10:18:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:15 Set channel filter=0.000000e+000 result=40 10:18:15 Config A/D Result=40 10:18:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:15 Get A/D filter: -9.255963e+061 result=40 10:18:15 Get A/D value=-858993460 result=40 10:18:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:15 Parameters OK 10:18:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:15 Set A/D data flow result=40 10:18:15 Set A/D channel type result=40 10:18:15 Set A/D encoding result=40 10:18:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:15 Set channel filter=0.000000e+000 result=40 10:18:15 Config A/D Result=40 10:18:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:15 Get A/D filter: -9.255963e+061 result=40 10:18:15 Get A/D value=-858993460 result=40 10:18:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:15 Aux= 10:18:15 Message to Camera, serial 113315 queued 10:18:52 Received message from Master: op=PointingHead serial=113328 10:18:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:18:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:18:52 Point started: ret=0 10:18:52 point_skyscan result=0 10:18:53 Check angles 10:18:53 SkyScan query 10:18:54 SkyScan query done: ret=0 az=152.925<-10195 ze=8.61<-11426 Statuses=0009 0009 10:18:54 Msec=0 True Az=152.925 Ze=8.61 Az status=0009 Ze status=0009 10:18:54 Check angles 10:18:54 SkyScan query 10:18:54 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.405<-12827 Statuses=0009 0009 10:18:54 Msec=750 True Az=135.45 Ze=-12.405 Az status=0009 Ze status=0009 10:18:55 Check angles 10:18:55 SkyScan query 10:18:55 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.27<-14218 Statuses=0009 0009 10:18:55 Msec=1500 True Az=117.825 Ze=-33.27 Az status=0009 Ze status=0009 10:18:55 Check angles 10:18:55 SkyScan query 10:18:56 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.54<-15436 Statuses=0009 0009 10:18:56 Msec=2250 True Az=100.455 Ze=-51.54 Az status=0009 Ze status=0009 10:18:56 Check angles 10:18:56 SkyScan query 10:18:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:18:57 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:18:57 Check angles 10:18:57 SkyScan query 10:18:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:18:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:18:57 Message to Master queued w/err=0: serial=113328 error=0 10:19:02 Received message from Master: op=Filter serial=113329 10:19:02 Color wheel filter change from 0 to 0 10:19:02 FLIGetFilterPos err=0 currentPosition=0 10:19:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:02 Filter is already there-color wheel unchanged 10:19:03 Received message from Master: op=Shutter serial=113330 10:19:03 Shutter LASER close 10:19:03 Received message from Camera: op=State serial=113332 10:19:03 GetSingleValue result=40 Value=cccccccc 10:19:03 SkyScan query 10:19:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:19:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:03 Parameters OK 10:19:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:03 Set A/D data flow result=40 10:19:03 Set A/D channel type result=40 10:19:03 Set A/D encoding result=40 10:19:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:03 Set channel filter=0.000000e+000 result=40 10:19:03 Config A/D Result=40 10:19:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:03 Get A/D filter: -9.255963e+061 result=40 10:19:03 Get A/D value=-858993460 result=40 10:19:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:03 Parameters OK 10:19:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:03 Set A/D data flow result=40 10:19:03 Set A/D channel type result=40 10:19:03 Set A/D encoding result=40 10:19:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:03 Set channel filter=0.000000e+000 result=40 10:19:03 Config A/D Result=40 10:19:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:03 Get A/D filter: -9.255963e+061 result=40 10:19:03 Get A/D value=-858993460 result=40 10:19:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:03 Aux= 10:19:03 Message to Camera, serial 113332 queued 10:19:40 Received message from Master: op=PointingHead serial=113345 10:19:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:19:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:19:40 Point started: ret=0 10:19:40 point_skyscan result=0 10:19:41 Check angles 10:19:41 SkyScan query 10:19:42 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.45<-17430 Statuses=0009 0009 10:19:42 Msec=0 True Az=109.14 Ze=-81.45 Az status=0009 Ze status=0009 10:19:42 Check angles 10:19:42 SkyScan query 10:19:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 10:19:43 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 10:19:43 Check angles 10:19:43 SkyScan query 10:19:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 10:19:43 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 10:19:43 Check angles 10:19:43 SkyScan query 10:19:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 10:19:44 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 10:19:44 Check angles 10:19:44 SkyScan query 10:19:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 10:19:45 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 10:19:45 Check angles 10:19:45 SkyScan query 10:19:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:19:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:19:46 Message to Master queued w/err=0: serial=113345 error=0 10:19:51 Received message from Master: op=Filter serial=113346 10:19:51 Color wheel filter change from 0 to 0 10:19:51 FLIGetFilterPos err=0 currentPosition=0 10:19:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:51 Filter is already there-color wheel unchanged 10:19:51 Received message from Master: op=Shutter serial=113347 10:19:51 Shutter LASER open 10:19:51 Received message from Camera: op=State serial=113349 10:19:51 GetSingleValue result=40 Value=cccccccc 10:19:51 SkyScan query 10:19:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:19:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:51 Parameters OK 10:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:51 Set A/D data flow result=40 10:19:51 Set A/D channel type result=40 10:19:51 Set A/D encoding result=40 10:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:51 Set channel filter=0.000000e+000 result=40 10:19:51 Config A/D Result=40 10:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:51 Get A/D filter: -9.255963e+061 result=40 10:19:51 Get A/D value=-858993460 result=40 10:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:51 Parameters OK 10:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:51 Set A/D data flow result=40 10:19:51 Set A/D channel type result=40 10:19:51 Set A/D encoding result=40 10:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:51 Set channel filter=0.000000e+000 result=40 10:19:51 Config A/D Result=40 10:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:51 Get A/D filter: -9.255963e+061 result=40 10:19:51 Get A/D value=-858993460 result=40 10:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:51 Aux= 10:19:51 Message to Camera, serial 113349 queued 10:20:00 Received message from Master: op=Shutter serial=113359 10:20:00 Shutter LASER close 10:20:00 Received message from Master: op=PointingHead serial=113363 10:20:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:20:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:20:01 Point started: ret=0 10:20:01 point_skyscan result=0 10:20:01 Check angles 10:20:01 SkyScan query 10:20:02 SkyScan query done: ret=0 az=89.625<-5975 ze=157.08<-1528 Statuses=0009 0009 10:20:02 Msec=0 True Az=89.625 Ze=157.08 Az status=0009 Ze status=0009 10:20:02 Check angles 10:20:02 SkyScan query 10:20:03 SkyScan query done: ret=0 az=72.195<-4813 ze=136.095<-2927 Statuses=0009 0009 10:20:03 Msec=750 True Az=72.195 Ze=136.095 Az status=0009 Ze status=0009 10:20:03 Check angles 10:20:03 SkyScan query 10:20:03 SkyScan query done: ret=0 az=54.585<-3639 ze=114.69<-4354 Statuses=0009 0009 10:20:03 Msec=1500 True Az=54.585 Ze=114.69 Az status=0009 Ze status=0009 10:20:04 Check angles 10:20:04 SkyScan query 10:20:04 SkyScan query done: ret=0 az=40.965<-2731 ze=93.33<-5778 Statuses=0009 0009 10:20:04 Msec=2250 True Az=40.965 Ze=93.33 Az status=0009 Ze status=0009 10:20:04 Check angles 10:20:04 SkyScan query 10:20:05 SkyScan query done: ret=0 az=40.995<-2733 ze=72.33<-7178 Statuses=0008 0009 10:20:05 Msec=3000 True Az=40.995 Ze=72.33 Az status=0008 Ze status=0009 10:20:05 Check angles 10:20:05 SkyScan query 10:20:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 10:20:06 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 10:20:06 Check angles 10:20:06 SkyScan query 10:20:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:20:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:20:07 Message to Master queued w/err=0: serial=113363 error=0 10:20:12 Received message from Master: op=Filter serial=113364 10:20:12 Color wheel filter change from 0 to 0 10:20:12 FLIGetFilterPos err=0 currentPosition=0 10:20:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:12 Filter is already there-color wheel unchanged 10:20:12 Received message from Master: op=Shutter serial=113365 10:20:12 Shutter LASER close 10:20:12 Received message from Camera: op=State serial=113367 10:20:12 GetSingleValue result=40 Value=cccccccc 10:20:12 SkyScan query 10:20:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:20:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:12 Parameters OK 10:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:12 Set A/D data flow result=40 10:20:12 Set A/D channel type result=40 10:20:12 Set A/D encoding result=40 10:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:12 Set channel filter=0.000000e+000 result=40 10:20:12 Config A/D Result=40 10:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:12 Get A/D filter: -9.255963e+061 result=40 10:20:12 Get A/D value=-858993460 result=40 10:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:12 Parameters OK 10:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:12 Set A/D data flow result=40 10:20:12 Set A/D channel type result=40 10:20:12 Set A/D encoding result=40 10:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:12 Set channel filter=0.000000e+000 result=40 10:20:12 Config A/D Result=40 10:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:12 Get A/D filter: -9.255963e+061 result=40 10:20:12 Get A/D value=-858993460 result=40 10:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:12 Aux= 10:20:12 Message to Camera, serial 113367 queued 10:20:49 Received message from Master: op=PointingHead serial=113380 10:20:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:20:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:20:50 Point started: ret=0 10:20:50 point_skyscan result=0 10:20:50 Check angles 10:20:50 SkyScan query 10:20:51 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 10:20:51 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 10:20:51 Check angles 10:20:51 SkyScan query 10:20:52 SkyScan query done: ret=0 az=81.3<-5420 ze=66.495<-7567 Statuses=0009 0008 10:20:52 Msec=750 True Az=81.3 Ze=66.495 Az status=0009 Ze status=0008 10:20:52 Check angles 10:20:52 SkyScan query 10:20:52 SkyScan query done: ret=0 az=98.805<-6587 ze=66.495<-7567 Statuses=0009 0008 10:20:52 Msec=1500 True Az=98.805 Ze=66.495 Az status=0009 Ze status=0008 10:20:53 Check angles 10:20:53 SkyScan query 10:20:53 SkyScan query done: ret=0 az=116.295<-7753 ze=66.495<-7567 Statuses=0009 0008 10:20:53 Msec=2250 True Az=116.295 Ze=66.495 Az status=0009 Ze status=0008 10:20:53 Check angles 10:20:53 SkyScan query 10:20:54 SkyScan query done: ret=0 az=134.22<-8948 ze=66.495<-7567 Statuses=0009 0008 10:20:54 Msec=3000 True Az=134.22 Ze=66.495 Az status=0009 Ze status=0008 10:20:54 Check angles 10:20:54 SkyScan query 10:20:55 SkyScan query done: ret=0 az=151.665<-10111 ze=66.495<-7567 Statuses=0009 0008 10:20:55 Msec=3750 True Az=151.665 Ze=66.495 Az status=0009 Ze status=0008 10:20:55 Check angles 10:20:55 SkyScan query 10:20:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:20:55 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:20:55 Message to Master queued w/err=0: serial=113380 error=0 10:21:00 Received message from Master: op=Filter serial=113381 10:21:00 Color wheel filter change from 0 to 0 10:21:00 FLIGetFilterPos err=0 currentPosition=0 10:21:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:00 Filter is already there-color wheel unchanged 10:21:01 Received message from Master: op=Shutter serial=113382 10:21:01 Shutter LASER close 10:21:01 Received message from Camera: op=State serial=113384 10:21:01 GetSingleValue result=40 Value=cccccccc 10:21:01 SkyScan query 10:21:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:21:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:01 Parameters OK 10:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:01 Set A/D data flow result=40 10:21:01 Set A/D channel type result=40 10:21:01 Set A/D encoding result=40 10:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:01 Set channel filter=0.000000e+000 result=40 10:21:01 Config A/D Result=40 10:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:01 Get A/D filter: -9.255963e+061 result=40 10:21:01 Get A/D value=-858993460 result=40 10:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:01 Parameters OK 10:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:01 Set A/D data flow result=40 10:21:01 Set A/D channel type result=40 10:21:01 Set A/D encoding result=40 10:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:01 Set channel filter=0.000000e+000 result=40 10:21:01 Config A/D Result=40 10:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:01 Get A/D filter: -9.255963e+061 result=40 10:21:01 Get A/D value=-858993460 result=40 10:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:01 Aux= 10:21:01 Message to Camera, serial 113384 queued 10:21:37 Received message from Master: op=PointingHead serial=113396 10:21:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:21:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:21:37 Point started: ret=0 10:21:37 point_skyscan result=0 10:21:38 Check angles 10:21:38 SkyScan query 10:21:39 SkyScan query done: ret=0 az=134.805<-8987 ze=36.525<-9565 Statuses=0009 0009 10:21:39 Msec=0 True Az=134.805 Ze=36.525 Az status=0009 Ze status=0009 10:21:39 Check angles 10:21:39 SkyScan query 10:21:40 SkyScan query done: ret=0 az=117.3<-7820 ze=15.615<-10959 Statuses=0009 0009 10:21:40 Msec=750 True Az=117.3 Ze=15.615 Az status=0009 Ze status=0009 10:21:40 Check angles 10:21:40 SkyScan query 10:21:40 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.49<-12366 Statuses=0009 0009 10:21:40 Msec=1500 True Az=99.975 Ze=-5.49 Az status=0009 Ze status=0009 10:21:41 Check angles 10:21:41 SkyScan query 10:21:41 SkyScan query done: ret=0 az=82.11<-5474 ze=-26.79<-13786 Statuses=0009 0009 10:21:41 Msec=2250 True Az=82.11 Ze=-26.79 Az status=0009 Ze status=0009 10:21:41 Check angles 10:21:41 SkyScan query 10:21:42 SkyScan query done: ret=0 az=64.59<-4306 ze=-38.58<-14572 Statuses=0009 0008 10:21:42 Msec=3000 True Az=64.59 Ze=-38.58 Az status=0009 Ze status=0008 10:21:42 Check angles 10:21:42 SkyScan query 10:21:43 SkyScan query done: ret=0 az=46.815<-3121 ze=-38.52<-14568 Statuses=0009 0008 10:21:43 Msec=3750 True Az=46.815 Ze=-38.52 Az status=0009 Ze status=0008 10:21:43 Check angles 10:21:43 SkyScan query 10:21:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:21:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:21:43 Message to Master queued w/err=0: serial=113396 error=0 10:21:48 Received message from Master: op=Filter serial=113397 10:21:48 Color wheel filter change from 0 to 0 10:21:48 FLIGetFilterPos err=0 currentPosition=0 10:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:48 Filter is already there-color wheel unchanged 10:21:49 Received message from Master: op=Shutter serial=113398 10:21:49 Shutter LASER close 10:21:49 Received message from Camera: op=State serial=113400 10:21:49 GetSingleValue result=40 Value=cccccccc 10:21:49 SkyScan query 10:21:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:21:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:49 Parameters OK 10:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:49 Set A/D data flow result=40 10:21:49 Set A/D channel type result=40 10:21:49 Set A/D encoding result=40 10:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:49 Set channel filter=0.000000e+000 result=40 10:21:49 Config A/D Result=40 10:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:49 Get A/D filter: -9.255963e+061 result=40 10:21:49 Get A/D value=-858993460 result=40 10:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:49 Parameters OK 10:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:49 Set A/D data flow result=40 10:21:49 Set A/D channel type result=40 10:21:49 Set A/D encoding result=40 10:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:49 Set channel filter=0.000000e+000 result=40 10:21:49 Config A/D Result=40 10:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:49 Get A/D filter: -9.255963e+061 result=40 10:21:49 Get A/D value=-858993460 result=40 10:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:49 Aux= 10:21:49 Message to Camera, serial 113400 queued 10:22:26 Received message from Master: op=PointingHead serial=113413 10:22:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:22:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:22:26 Point started: ret=0 10:22:26 point_skyscan result=0 10:22:27 Check angles 10:22:27 SkyScan query 10:22:28 SkyScan query done: ret=0 az=64.26<-4284 ze=-68.64<-16576 Statuses=0009 0009 10:22:28 Msec=0 True Az=64.26 Ze=-68.64 Az status=0009 Ze status=0009 10:22:28 Check angles 10:22:28 SkyScan query 10:22:28 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.61<-17974 Statuses=0009 0009 10:22:28 Msec=750 True Az=81.735 Ze=-89.61 Az status=0009 Ze status=0009 10:22:29 Check angles 10:22:29 SkyScan query 10:22:29 SkyScan query done: ret=0 az=99.57<-6638 ze=-111<-19400 Statuses=0009 0009 10:22:29 Msec=1500 True Az=99.57 Ze=-111 Az status=0009 Ze status=0009 10:22:29 Check angles 10:22:29 SkyScan query 10:22:30 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.91<-20794 Statuses=0009 0009 10:22:30 Msec=2250 True Az=117.09 Ze=-131.91 Az status=0009 Ze status=0009 10:22:30 Check angles 10:22:30 SkyScan query 10:22:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 10:22:31 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 10:22:31 Check angles 10:22:31 SkyScan query 10:22:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:22:31 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:22:31 Message to Master queued w/err=0: serial=113413 error=0 10:22:36 Received message from Master: op=Filter serial=113414 10:22:36 Color wheel filter change from 0 to 0 10:22:36 FLIGetFilterPos err=0 currentPosition=0 10:22:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:36 Filter is already there-color wheel unchanged 10:22:37 Received message from Master: op=Shutter serial=113415 10:22:37 Shutter LASER close 10:22:37 Received message from Camera: op=State serial=113417 10:22:37 GetSingleValue result=40 Value=cccccccc 10:22:37 SkyScan query 10:22:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:22:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:37 Parameters OK 10:22:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:37 Set A/D data flow result=40 10:22:37 Set A/D channel type result=40 10:22:37 Set A/D encoding result=40 10:22:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:37 Set channel filter=0.000000e+000 result=40 10:22:37 Config A/D Result=40 10:22:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:37 Get A/D filter: -9.255963e+061 result=40 10:22:37 Get A/D value=-858993460 result=40 10:22:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:37 Parameters OK 10:22:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:37 Set A/D data flow result=40 10:22:37 Set A/D channel type result=40 10:22:37 Set A/D encoding result=40 10:22:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:37 Set channel filter=0.000000e+000 result=40 10:22:37 Config A/D Result=40 10:22:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:37 Get A/D filter: -9.255963e+061 result=40 10:22:37 Get A/D value=-858993460 result=40 10:22:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:37 Aux= 10:22:37 Message to Camera, serial 113417 queued 10:23:14 Received message from Master: op=PointingHead serial=113430 10:23:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:23:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:23:14 Point started: ret=0 10:23:14 point_skyscan result=0 10:23:15 Check angles 10:23:15 SkyScan query 10:23:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 10:23:16 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 10:23:16 Check angles 10:23:16 SkyScan query 10:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:23:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:23:17 Message to Master queued w/err=0: serial=113430 error=0 10:23:22 Received message from Master: op=Filter serial=113431 10:23:22 Color wheel filter change from 0 to 0 10:23:22 FLIGetFilterPos err=0 currentPosition=0 10:23:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:22 Filter is already there-color wheel unchanged 10:23:22 Received message from Master: op=Shutter serial=113432 10:23:22 Shutter LASER open 10:23:22 Received message from Camera: op=State serial=113434 10:23:22 GetSingleValue result=40 Value=cccccccc 10:23:22 SkyScan query 10:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:23:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:22 Parameters OK 10:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:22 Set A/D data flow result=40 10:23:22 Set A/D channel type result=40 10:23:22 Set A/D encoding result=40 10:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:22 Set channel filter=0.000000e+000 result=40 10:23:22 Config A/D Result=40 10:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:22 Get A/D filter: -9.255963e+061 result=40 10:23:22 Get A/D value=-858993460 result=40 10:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:22 Parameters OK 10:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:22 Set A/D data flow result=40 10:23:22 Set A/D channel type result=40 10:23:22 Set A/D encoding result=40 10:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:22 Set channel filter=0.000000e+000 result=40 10:23:22 Config A/D Result=40 10:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:22 Get A/D filter: -9.255963e+061 result=40 10:23:22 Get A/D value=-858993460 result=40 10:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:22 Aux= 10:23:22 Message to Camera, serial 113434 queued 10:23:31 Received message from Master: op=Shutter serial=113444 10:23:31 Shutter LASER close 10:23:31 Received message from Master: op=PointingHead serial=113448 10:23:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:23:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:23:32 Point started: ret=0 10:23:32 point_skyscan result=0 10:23:33 Check angles 10:23:33 SkyScan query 10:23:33 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.4<-21560 Statuses=0009 0009 10:23:33 Msec=0 True Az=135.78 Ze=-143.4 Az status=0009 Ze status=0009 10:23:33 Check angles 10:23:33 SkyScan query 10:23:34 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.445<-20163 Statuses=0009 0009 10:23:34 Msec=750 True Az=153.3 Ze=-122.445 Az status=0009 Ze status=0009 10:23:34 Check angles 10:23:34 SkyScan query 10:23:35 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.55<-18770 Statuses=0009 0009 10:23:35 Msec=1500 True Az=170.835 Ze=-101.55 Az status=0009 Ze status=0009 10:23:35 Check angles 10:23:35 SkyScan query 10:23:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.52<-17368 Statuses=0008 0009 10:23:35 Msec=2250 True Az=176.01 Ze=-80.52 Az status=0008 Ze status=0009 10:23:36 Check angles 10:23:36 SkyScan query 10:23:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.595<-15973 Statuses=0008 0009 10:23:36 Msec=3000 True Az=176.01 Ze=-59.595 Az status=0008 Ze status=0009 10:23:36 Check angles 10:23:36 SkyScan query 10:23:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:23:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:23:37 Message to Master queued w/err=0: serial=113448 error=0 10:23:42 Received message from Master: op=Filter serial=113449 10:23:42 Color wheel filter change from 0 to 0 10:23:42 FLIGetFilterPos err=0 currentPosition=0 10:23:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:42 Filter is already there-color wheel unchanged 10:23:42 Received message from Master: op=Shutter serial=113450 10:23:42 Shutter LASER close 10:23:42 Received message from Camera: op=State serial=113452 10:23:42 GetSingleValue result=40 Value=cccccccc 10:23:42 SkyScan query 10:23:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:23:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:43 Parameters OK 10:23:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:43 Set A/D data flow result=40 10:23:43 Set A/D channel type result=40 10:23:43 Set A/D encoding result=40 10:23:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:43 Set channel filter=0.000000e+000 result=40 10:23:43 Config A/D Result=40 10:23:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:43 Get A/D filter: -9.255963e+061 result=40 10:23:43 Get A/D value=-858993460 result=40 10:23:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:43 Parameters OK 10:23:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:43 Set A/D data flow result=40 10:23:43 Set A/D channel type result=40 10:23:43 Set A/D encoding result=40 10:23:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:43 Set channel filter=0.000000e+000 result=40 10:23:43 Config A/D Result=40 10:23:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:43 Get A/D filter: -9.255963e+061 result=40 10:23:43 Get A/D value=-858993460 result=40 10:23:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:43 Aux= 10:23:43 Message to Camera, serial 113452 queued 10:24:20 Received message from Master: op=PointingHead serial=113465 10:24:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:24:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:24:20 Point started: ret=0 10:24:20 point_skyscan result=0 10:24:21 Check angles 10:24:21 SkyScan query 10:24:21 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.96<-13464 Statuses=0009 0009 10:24:21 Msec=0 True Az=153.18 Ze=-21.96 Az status=0009 Ze status=0009 10:24:22 Check angles 10:24:22 SkyScan query 10:24:22 SkyScan query done: ret=0 az=135.78<-9052 ze=-0.975<-12065 Statuses=0009 0009 10:24:22 Msec=750 True Az=135.78 Ze=-0.975 Az status=0009 Ze status=0009 10:24:22 Check angles 10:24:22 SkyScan query 10:24:23 SkyScan query done: ret=0 az=117.84<-7856 ze=20.4<-10640 Statuses=0009 0009 10:24:23 Msec=1500 True Az=117.84 Ze=20.4 Az status=0009 Ze status=0009 10:24:23 Check angles 10:24:23 SkyScan query 10:24:24 SkyScan query done: ret=0 az=100.41<-6694 ze=41.385<-9241 Statuses=0009 0009 10:24:24 Msec=2250 True Az=100.41 Ze=41.385 Az status=0009 Ze status=0009 10:24:24 Check angles 10:24:24 SkyScan query 10:24:24 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 10:24:24 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 10:24:25 Check angles 10:24:25 SkyScan query 10:24:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:24:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:24:25 Message to Master queued w/err=0: serial=113465 error=0 10:24:30 Received message from Master: op=Filter serial=113466 10:24:30 Color wheel filter change from 0 to 0 10:24:30 FLIGetFilterPos err=0 currentPosition=0 10:24:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:30 Filter is already there-color wheel unchanged 10:24:30 Received message from Master: op=Shutter serial=113467 10:24:30 Shutter LASER close 10:24:30 Received message from Camera: op=State serial=113469 10:24:30 GetSingleValue result=40 Value=cccccccc 10:24:30 SkyScan query 10:24:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:24:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:31 Parameters OK 10:24:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:31 Set A/D data flow result=40 10:24:31 Set A/D channel type result=40 10:24:31 Set A/D encoding result=40 10:24:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:31 Set channel filter=0.000000e+000 result=40 10:24:31 Config A/D Result=40 10:24:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:31 Get A/D filter: -9.255963e+061 result=40 10:24:31 Get A/D value=-858993460 result=40 10:24:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:31 Parameters OK 10:24:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:31 Set A/D data flow result=40 10:24:31 Set A/D channel type result=40 10:24:31 Set A/D encoding result=40 10:24:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:31 Set channel filter=0.000000e+000 result=40 10:24:31 Config A/D Result=40 10:24:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:31 Get A/D filter: -9.255963e+061 result=40 10:24:31 Get A/D value=-858993460 result=40 10:24:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:31 Aux= 10:24:31 Message to Camera, serial 113469 queued 10:25:08 Received message from Master: op=PointingHead serial=113482 10:25:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:25:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:25:08 Point started: ret=0 10:25:08 point_skyscan result=0 10:25:09 Check angles 10:25:09 SkyScan query 10:25:09 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 10:25:09 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 10:25:10 Check angles 10:25:10 SkyScan query 10:25:10 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 10:25:10 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 10:25:10 Check angles 10:25:10 SkyScan query 10:25:11 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 10:25:11 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 10:25:11 Check angles 10:25:11 SkyScan query 10:25:12 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 10:25:12 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 10:25:12 Check angles 10:25:12 SkyScan query 10:25:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:25:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:25:13 Check angles 10:25:13 SkyScan query 10:25:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:25:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:25:13 Message to Master queued w/err=0: serial=113482 error=0 10:25:18 Received message from Master: op=Filter serial=113483 10:25:18 Color wheel filter change from 0 to 0 10:25:18 FLIGetFilterPos err=0 currentPosition=0 10:25:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:18 Filter is already there-color wheel unchanged 10:25:18 Received message from Master: op=Shutter serial=113484 10:25:18 Shutter LASER close 10:25:18 Received message from Camera: op=State serial=113486 10:25:18 GetSingleValue result=40 Value=cccccccc 10:25:18 SkyScan query 10:25:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:25:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:19 Parameters OK 10:25:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:19 Set A/D data flow result=40 10:25:19 Set A/D channel type result=40 10:25:19 Set A/D encoding result=40 10:25:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:19 Set channel filter=0.000000e+000 result=40 10:25:19 Config A/D Result=40 10:25:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:19 Get A/D filter: -9.255963e+061 result=40 10:25:19 Get A/D value=-858993460 result=40 10:25:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:19 Parameters OK 10:25:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:19 Set A/D data flow result=40 10:25:19 Set A/D channel type result=40 10:25:19 Set A/D encoding result=40 10:25:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:19 Set channel filter=0.000000e+000 result=40 10:25:19 Config A/D Result=40 10:25:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:19 Get A/D filter: -9.255963e+061 result=40 10:25:19 Get A/D value=-858993460 result=40 10:25:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:19 Aux= 10:25:19 Message to Camera, serial 113486 queued 10:25:56 Received message from Master: op=PointingHead serial=113499 10:25:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:25:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:25:56 Point started: ret=0 10:25:56 point_skyscan result=0 10:25:57 Check angles 10:25:57 SkyScan query 10:25:58 SkyScan query done: ret=0 az=153.105<-10207 ze=8.76<-11416 Statuses=0009 0009 10:25:58 Msec=0 True Az=153.105 Ze=8.76 Az status=0009 Ze status=0009 10:25:58 Check angles 10:25:58 SkyScan query 10:25:58 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.63<-12842 Statuses=0009 0009 10:25:58 Msec=750 True Az=135.27 Ze=-12.63 Az status=0009 Ze status=0009 10:25:58 Check angles 10:25:58 SkyScan query 10:25:59 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.57<-14238 Statuses=0009 0009 10:25:59 Msec=1500 True Az=117.75 Ze=-33.57 Az status=0009 Ze status=0009 10:25:59 Check angles 10:25:59 SkyScan query [UTC 2018-12-13 10:26:00] 10:26:00 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 10:26:00 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 10:26:00 Check angles 10:26:00 SkyScan query 10:26:01 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:26:01 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:26:01 Check angles 10:26:01 SkyScan query 10:26:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:26:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:26:01 Message to Master queued w/err=0: serial=113499 error=0 10:26:06 Received message from Master: op=Filter serial=113500 10:26:06 Color wheel filter change from 0 to 0 10:26:06 FLIGetFilterPos err=0 currentPosition=0 10:26:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:06 Filter is already there-color wheel unchanged 10:26:07 Received message from Master: op=Shutter serial=113501 10:26:07 Shutter LASER close 10:26:07 Received message from Camera: op=State serial=113503 10:26:07 GetSingleValue result=40 Value=cccccccc 10:26:07 SkyScan query 10:26:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:26:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:07 Parameters OK 10:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:07 Set A/D data flow result=40 10:26:07 Set A/D channel type result=40 10:26:07 Set A/D encoding result=40 10:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:07 Set channel filter=0.000000e+000 result=40 10:26:07 Config A/D Result=40 10:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:07 Get A/D filter: -9.255963e+061 result=40 10:26:07 Get A/D value=-858993460 result=40 10:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:07 Parameters OK 10:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:07 Set A/D data flow result=40 10:26:07 Set A/D channel type result=40 10:26:07 Set A/D encoding result=40 10:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:07 Set channel filter=0.000000e+000 result=40 10:26:07 Config A/D Result=40 10:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:07 Get A/D filter: -9.255963e+061 result=40 10:26:07 Get A/D value=-858993460 result=40 10:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:07 Aux= 10:26:07 Message to Camera, serial 113503 queued 10:26:44 Received message from Master: op=PointingHead serial=113516 10:26:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:26:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:26:44 Point started: ret=0 10:26:44 point_skyscan result=0 10:26:45 Check angles 10:26:45 SkyScan query 10:26:46 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.06<-17404 Statuses=0009 0009 10:26:46 Msec=0 True Az=108.885 Ze=-81.06 Az status=0009 Ze status=0009 10:26:46 Check angles 10:26:46 SkyScan query 10:26:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 10:26:46 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 10:26:47 Check angles 10:26:47 SkyScan query 10:26:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.94<-20196 Statuses=0008 0009 10:26:47 Msec=1500 True Az=112.995 Ze=-122.94 Az status=0008 Ze status=0009 10:26:47 Check angles 10:26:47 SkyScan query 10:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 10:26:48 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 10:26:48 Check angles 10:26:48 SkyScan query 10:26:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.85<-22990 Statuses=0008 0009 10:26:49 Msec=3000 True Az=112.995 Ze=-164.85 Az status=0008 Ze status=0009 10:26:49 Check angles 10:26:49 SkyScan query 10:26:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:26:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:26:49 Message to Master queued w/err=0: serial=113516 error=0 10:26:54 Received message from Master: op=Filter serial=113517 10:26:54 Color wheel filter change from 0 to 0 10:26:54 FLIGetFilterPos err=0 currentPosition=0 10:26:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:54 Filter is already there-color wheel unchanged 10:26:55 Received message from Master: op=Shutter serial=113518 10:26:55 Shutter LASER open 10:26:55 Received message from Camera: op=State serial=113520 10:26:55 GetSingleValue result=40 Value=cccccccc 10:26:55 SkyScan query 10:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:26:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:55 Parameters OK 10:26:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:55 Set A/D data flow result=40 10:26:55 Set A/D channel type result=40 10:26:55 Set A/D encoding result=40 10:26:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:55 Set channel filter=0.000000e+000 result=40 10:26:55 Config A/D Result=40 10:26:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:55 Get A/D filter: -9.255963e+061 result=40 10:26:55 Get A/D value=-858993460 result=40 10:26:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:55 Parameters OK 10:26:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:55 Set A/D data flow result=40 10:26:55 Set A/D channel type result=40 10:26:55 Set A/D encoding result=40 10:26:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:55 Set channel filter=0.000000e+000 result=40 10:26:55 Config A/D Result=40 10:26:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:55 Get A/D filter: -9.255963e+061 result=40 10:26:55 Get A/D value=-858993460 result=40 10:26:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:55 Aux= 10:26:55 Message to Camera, serial 113520 queued 10:27:04 Received message from Master: op=Shutter serial=113530 10:27:04 Shutter LASER close 10:27:04 Received message from Master: op=PointingHead serial=113534 10:27:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:27:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:27:05 Point started: ret=0 10:27:05 point_skyscan result=0 10:27:05 Check angles 10:27:05 SkyScan query 10:27:06 SkyScan query done: ret=0 az=90.105<-6007 ze=157.485<-1501 Statuses=0009 0009 10:27:06 Msec=0 True Az=90.105 Ze=157.485 Az status=0009 Ze status=0009 10:27:06 Check angles 10:27:06 SkyScan query 10:27:07 SkyScan query done: ret=0 az=72.675<-4845 ze=136.47<-2902 Statuses=0009 0009 10:27:07 Msec=750 True Az=72.675 Ze=136.47 Az status=0009 Ze status=0009 10:27:07 Check angles 10:27:07 SkyScan query 10:27:07 SkyScan query done: ret=0 az=55.155<-3677 ze=115.47<-4302 Statuses=0009 0009 10:27:07 Msec=1500 True Az=55.155 Ze=115.47 Az status=0009 Ze status=0009 10:27:08 Check angles 10:27:08 SkyScan query 10:27:08 SkyScan query done: ret=0 az=40.905<-2727 ze=94.575<-5695 Statuses=0009 0009 10:27:08 Msec=2250 True Az=40.905 Ze=94.575 Az status=0009 Ze status=0009 10:27:08 Check angles 10:27:08 SkyScan query 10:27:09 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 10:27:09 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 10:27:09 Check angles 10:27:09 SkyScan query 10:27:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 10:27:10 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 10:27:10 Check angles 10:27:10 SkyScan query 10:27:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:27:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:27:10 Message to Master queued w/err=0: serial=113534 error=0 10:27:15 Received message from Master: op=Filter serial=113535 10:27:15 Color wheel filter change from 0 to 0 10:27:15 FLIGetFilterPos err=0 currentPosition=0 10:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:15 Filter is already there-color wheel unchanged 10:27:16 Received message from Master: op=Shutter serial=113536 10:27:16 Shutter LASER close 10:27:16 Received message from Camera: op=State serial=113538 10:27:16 GetSingleValue result=40 Value=cccccccc 10:27:16 SkyScan query 10:27:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:16 Parameters OK 10:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:16 Set A/D data flow result=40 10:27:16 Set A/D channel type result=40 10:27:16 Set A/D encoding result=40 10:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:16 Set channel filter=0.000000e+000 result=40 10:27:16 Config A/D Result=40 10:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:16 Get A/D filter: -9.255963e+061 result=40 10:27:16 Get A/D value=-858993460 result=40 10:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:16 Parameters OK 10:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:16 Set A/D data flow result=40 10:27:16 Set A/D channel type result=40 10:27:16 Set A/D encoding result=40 10:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:16 Set channel filter=0.000000e+000 result=40 10:27:16 Config A/D Result=40 10:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:16 Get A/D filter: -9.255963e+061 result=40 10:27:16 Get A/D value=-858993460 result=40 10:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:16 Aux= 10:27:16 Message to Camera, serial 113538 queued 10:27:53 Received message from Master: op=PointingHead serial=113551 10:27:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:27:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:27:53 Point started: ret=0 10:27:53 point_skyscan result=0 10:27:54 Check angles 10:27:54 SkyScan query 10:27:55 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 10:27:55 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 10:27:55 Check angles 10:27:55 SkyScan query 10:27:56 SkyScan query done: ret=0 az=81.315<-5421 ze=66.495<-7567 Statuses=0009 0008 10:27:56 Msec=750 True Az=81.315 Ze=66.495 Az status=0009 Ze status=0008 10:27:56 Check angles 10:27:56 SkyScan query 10:27:56 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 10:27:56 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 10:27:56 Check angles 10:27:56 SkyScan query 10:27:57 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 10:27:57 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 10:27:57 Check angles 10:27:57 SkyScan query 10:27:58 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 10:27:58 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 10:27:58 Check angles 10:27:58 SkyScan query 10:27:59 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 10:27:59 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 10:27:59 Check angles 10:27:59 SkyScan query 10:27:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:27:59 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:27:59 Message to Master queued w/err=0: serial=113551 error=0 10:28:04 Received message from Master: op=Filter serial=113552 10:28:04 Color wheel filter change from 0 to 0 10:28:04 FLIGetFilterPos err=0 currentPosition=0 10:28:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:04 Filter is already there-color wheel unchanged 10:28:04 Received message from Master: op=Shutter serial=113553 10:28:04 Shutter LASER close 10:28:05 Received message from Camera: op=State serial=113555 10:28:05 GetSingleValue result=40 Value=cccccccc 10:28:05 SkyScan query 10:28:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:28:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:05 Parameters OK 10:28:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:05 Set A/D data flow result=40 10:28:05 Set A/D channel type result=40 10:28:05 Set A/D encoding result=40 10:28:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:05 Set channel filter=0.000000e+000 result=40 10:28:05 Config A/D Result=40 10:28:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:05 Get A/D filter: -9.255963e+061 result=40 10:28:05 Get A/D value=-858993460 result=40 10:28:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:05 Parameters OK 10:28:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:05 Set A/D data flow result=40 10:28:05 Set A/D channel type result=40 10:28:05 Set A/D encoding result=40 10:28:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:05 Set channel filter=0.000000e+000 result=40 10:28:05 Config A/D Result=40 10:28:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:05 Get A/D filter: -9.255963e+061 result=40 10:28:05 Get A/D value=-858993460 result=40 10:28:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:05 Aux= 10:28:05 Message to Camera, serial 113555 queued 10:28:42 Received message from Master: op=PointingHead serial=113568 10:28:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:28:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:28:42 Point started: ret=0 10:28:42 point_skyscan result=0 10:28:43 Check angles 10:28:43 SkyScan query 10:28:44 SkyScan query done: ret=0 az=134.595<-8973 ze=36.285<-9581 Statuses=0009 0009 10:28:44 Msec=0 True Az=134.595 Ze=36.285 Az status=0009 Ze status=0009 10:28:44 Check angles 10:28:44 SkyScan query 10:28:44 SkyScan query done: ret=0 az=117.165<-7811 ze=15.36<-10976 Statuses=0009 0009 10:28:44 Msec=750 True Az=117.165 Ze=15.36 Az status=0009 Ze status=0009 10:28:45 Check angles 10:28:45 SkyScan query 10:28:45 SkyScan query done: ret=0 az=99.765<-6651 ze=-5.61<-12374 Statuses=0009 0009 10:28:45 Msec=1500 True Az=99.765 Ze=-5.61 Az status=0009 Ze status=0009 10:28:45 Check angles 10:28:45 SkyScan query 10:28:46 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.565<-13771 Statuses=0009 0009 10:28:46 Msec=2250 True Az=82.26 Ze=-26.565 Az status=0009 Ze status=0009 10:28:46 Check angles 10:28:46 SkyScan query 10:28:47 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.565<-14571 Statuses=0009 0008 10:28:47 Msec=3000 True Az=64.74 Ze=-38.565 Az status=0009 Ze status=0008 10:28:47 Check angles 10:28:47 SkyScan query 10:28:47 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.535<-14569 Statuses=0009 0008 10:28:47 Msec=3750 True Az=47.34 Ze=-38.535 Az status=0009 Ze status=0008 10:28:48 Check angles 10:28:48 SkyScan query 10:28:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:28:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:28:48 Message to Master queued w/err=0: serial=113568 error=0 10:28:53 Received message from Master: op=Filter serial=113569 10:28:53 Color wheel filter change from 0 to 0 10:28:53 FLIGetFilterPos err=0 currentPosition=0 10:28:53 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:53 Filter is already there-color wheel unchanged 10:28:53 Received message from Master: op=Shutter serial=113570 10:28:53 Shutter LASER close 10:28:53 Received message from Camera: op=State serial=113572 10:28:53 GetSingleValue result=40 Value=cccccccc 10:28:53 SkyScan query 10:28:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:28:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:54 Parameters OK 10:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:54 Set A/D data flow result=40 10:28:54 Set A/D channel type result=40 10:28:54 Set A/D encoding result=40 10:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:54 Set channel filter=0.000000e+000 result=40 10:28:54 Config A/D Result=40 10:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:54 Get A/D filter: -9.255963e+061 result=40 10:28:54 Get A/D value=-858993460 result=40 10:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:54 Parameters OK 10:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:54 Set A/D data flow result=40 10:28:54 Set A/D channel type result=40 10:28:54 Set A/D encoding result=40 10:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:54 Set channel filter=0.000000e+000 result=40 10:28:54 Config A/D Result=40 10:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:54 Get A/D filter: -9.255963e+061 result=40 10:28:54 Get A/D value=-858993460 result=40 10:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:54 Aux= 10:28:54 Message to Camera, serial 113572 queued 10:29:31 Received message from Master: op=PointingHead serial=113585 10:29:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:29:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:29:31 Point started: ret=0 10:29:31 point_skyscan result=0 10:29:32 Check angles 10:29:32 SkyScan query 10:29:33 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.625<-16575 Statuses=0009 0009 10:29:33 Msec=0 True Az=64.275 Ze=-68.625 Az status=0009 Ze status=0009 10:29:33 Check angles 10:29:33 SkyScan query 10:29:33 SkyScan query done: ret=0 az=81.72<-5448 ze=-89.625<-17975 Statuses=0009 0009 10:29:33 Msec=750 True Az=81.72 Ze=-89.625 Az status=0009 Ze status=0009 10:29:33 Check angles 10:29:33 SkyScan query 10:29:34 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.595<-19373 Statuses=0009 0009 10:29:34 Msec=1500 True Az=99.225 Ze=-110.595 Az status=0009 Ze status=0009 10:29:34 Check angles 10:29:34 SkyScan query 10:29:35 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.505<-20767 Statuses=0009 0009 10:29:35 Msec=2250 True Az=116.655 Ze=-131.505 Az status=0009 Ze status=0009 10:29:35 Check angles 10:29:35 SkyScan query 10:29:36 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 10:29:36 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 10:29:36 Check angles 10:29:36 SkyScan query 10:29:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:29:36 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:29:36 Message to Master queued w/err=0: serial=113585 error=0 10:29:41 Received message from Master: op=Filter serial=113586 10:29:41 Color wheel filter change from 0 to 0 10:29:41 FLIGetFilterPos err=0 currentPosition=0 10:29:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:41 Filter is already there-color wheel unchanged 10:29:41 Received message from Master: op=Shutter serial=113587 10:29:41 Shutter LASER close 10:29:41 Received message from Camera: op=State serial=113589 10:29:41 GetSingleValue result=40 Value=cccccccc 10:29:41 SkyScan query 10:29:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:29:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:42 Parameters OK 10:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:42 Set A/D data flow result=40 10:29:42 Set A/D channel type result=40 10:29:42 Set A/D encoding result=40 10:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:42 Set channel filter=0.000000e+000 result=40 10:29:42 Config A/D Result=40 10:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:42 Get A/D filter: -9.255963e+061 result=40 10:29:42 Get A/D value=-858993460 result=40 10:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:42 Parameters OK 10:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:42 Set A/D data flow result=40 10:29:42 Set A/D channel type result=40 10:29:42 Set A/D encoding result=40 10:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:42 Set channel filter=0.000000e+000 result=40 10:29:42 Config A/D Result=40 10:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:42 Get A/D filter: -9.255963e+061 result=40 10:29:42 Get A/D value=-858993460 result=40 10:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:42 Aux= 10:29:42 Message to Camera, serial 113589 queued 10:30:19 Received message from Master: op=PointingHead serial=113602 10:30:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:30:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:30:19 Point started: ret=0 10:30:19 point_skyscan result=0 10:30:20 Check angles 10:30:20 SkyScan query 10:30:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 10:30:21 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 10:30:21 Check angles 10:30:21 SkyScan query 10:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:30:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:30:21 Message to Master queued w/err=0: serial=113602 error=0 10:30:26 Received message from Master: op=Filter serial=113603 10:30:26 Color wheel filter change from 0 to 0 10:30:26 FLIGetFilterPos err=0 currentPosition=0 10:30:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:26 Filter is already there-color wheel unchanged 10:30:26 Received message from Master: op=Shutter serial=113604 10:30:26 Shutter LASER open 10:30:27 Received message from Camera: op=State serial=113606 10:30:27 GetSingleValue result=40 Value=cccccccc 10:30:27 SkyScan query 10:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:30:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:27 Parameters OK 10:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:27 Set A/D data flow result=40 10:30:27 Set A/D channel type result=40 10:30:27 Set A/D encoding result=40 10:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:27 Set channel filter=0.000000e+000 result=40 10:30:27 Config A/D Result=40 10:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:27 Get A/D filter: -9.255963e+061 result=40 10:30:27 Get A/D value=-858993460 result=40 10:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:27 Parameters OK 10:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:27 Set A/D data flow result=40 10:30:27 Set A/D channel type result=40 10:30:27 Set A/D encoding result=40 10:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:27 Set channel filter=0.000000e+000 result=40 10:30:27 Config A/D Result=40 10:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:27 Get A/D filter: -9.255963e+061 result=40 10:30:27 Get A/D value=-858993460 result=40 10:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:27 Aux= 10:30:27 Message to Camera, serial 113606 queued 10:30:36 Received message from Master: op=Shutter serial=113616 10:30:36 Shutter LASER close 10:30:36 Received message from Master: op=PointingHead serial=113620 10:30:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:30:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:30:37 Point started: ret=0 10:30:37 point_skyscan result=0 10:30:37 Check angles 10:30:37 SkyScan query 10:30:38 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.205<-21547 Statuses=0009 0009 10:30:38 Msec=0 True Az=135.975 Ze=-143.205 Az status=0009 Ze status=0009 10:30:38 Check angles 10:30:38 SkyScan query 10:30:39 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.785<-20119 Statuses=0009 0009 10:30:39 Msec=750 True Az=153.825 Ze=-121.785 Az status=0009 Ze status=0009 10:30:39 Check angles 10:30:39 SkyScan query 10:30:40 SkyScan query done: ret=0 az=171.72<-11448 ze=-100.35<-18690 Statuses=0009 0009 10:30:40 Msec=1500 True Az=171.72 Ze=-100.35 Az status=0009 Ze status=0009 10:30:40 Check angles 10:30:40 SkyScan query 10:30:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 10:30:40 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 10:30:40 Check angles 10:30:40 SkyScan query 10:30:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 10:30:41 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 10:30:41 Check angles 10:30:41 SkyScan query 10:30:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:30:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:30:42 Message to Master queued w/err=0: serial=113620 error=0 10:30:47 Received message from Master: op=Filter serial=113621 10:30:47 Color wheel filter change from 0 to 0 10:30:47 FLIGetFilterPos err=0 currentPosition=0 10:30:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:47 Filter is already there-color wheel unchanged 10:30:47 Received message from Master: op=Shutter serial=113622 10:30:47 Shutter LASER close 10:30:47 Received message from Camera: op=State serial=113624 10:30:47 GetSingleValue result=40 Value=cccccccc 10:30:47 SkyScan query 10:30:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:30:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:48 Parameters OK 10:30:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:48 Set A/D data flow result=40 10:30:48 Set A/D channel type result=40 10:30:48 Set A/D encoding result=40 10:30:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:48 Set channel filter=0.000000e+000 result=40 10:30:48 Config A/D Result=40 10:30:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:48 Get A/D filter: -9.255963e+061 result=40 10:30:48 Get A/D value=-858993460 result=40 10:30:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:48 Parameters OK 10:30:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:48 Set A/D data flow result=40 10:30:48 Set A/D channel type result=40 10:30:48 Set A/D encoding result=40 10:30:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:48 Set channel filter=0.000000e+000 result=40 10:30:48 Config A/D Result=40 10:30:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:48 Get A/D filter: -9.255963e+061 result=40 10:30:48 Get A/D value=-858993460 result=40 10:30:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:48 Aux= 10:30:48 Message to Camera, serial 113624 queued 10:31:25 Received message from Master: op=PointingHead serial=113637 10:31:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:31:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:31:25 Point started: ret=0 10:31:25 point_skyscan result=0 10:31:26 Check angles 10:31:26 SkyScan query 10:31:26 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.57<-13438 Statuses=0009 0009 10:31:26 Msec=0 True Az=152.775 Ze=-21.57 Az status=0009 Ze status=0009 10:31:26 Check angles 10:31:26 SkyScan query 10:31:27 SkyScan query done: ret=0 az=134.925<-8995 ze=-0.15<-12010 Statuses=0009 0009 10:31:27 Msec=750 True Az=134.925 Ze=-0.15 Az status=0009 Ze status=0009 10:31:27 Check angles 10:31:27 SkyScan query 10:31:28 SkyScan query done: ret=0 az=117.51<-7834 ze=20.79<-10614 Statuses=0009 0009 10:31:28 Msec=1500 True Az=117.51 Ze=20.79 Az status=0009 Ze status=0009 10:31:28 Check angles 10:31:28 SkyScan query 10:31:28 SkyScan query done: ret=0 az=100.11<-6674 ze=41.76<-9216 Statuses=0009 0009 10:31:28 Msec=2250 True Az=100.11 Ze=41.76 Az status=0009 Ze status=0009 10:31:29 Check angles 10:31:29 SkyScan query 10:31:29 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 10:31:29 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 10:31:29 Check angles 10:31:29 SkyScan query 10:31:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:31:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:31:30 Message to Master queued w/err=0: serial=113637 error=0 10:31:35 Received message from Master: op=Filter serial=113638 10:31:35 Color wheel filter change from 0 to 0 10:31:35 FLIGetFilterPos err=0 currentPosition=0 10:31:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:35 Filter is already there-color wheel unchanged 10:31:35 Received message from Master: op=Shutter serial=113639 10:31:35 Shutter LASER close 10:31:35 Received message from Camera: op=State serial=113641 10:31:35 GetSingleValue result=40 Value=cccccccc 10:31:35 SkyScan query 10:31:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:31:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:36 Parameters OK 10:31:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:36 Set A/D data flow result=40 10:31:36 Set A/D channel type result=40 10:31:36 Set A/D encoding result=40 10:31:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:36 Set channel filter=0.000000e+000 result=40 10:31:36 Config A/D Result=40 10:31:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:36 Get A/D filter: -9.255963e+061 result=40 10:31:36 Get A/D value=-858993460 result=40 10:31:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:36 Parameters OK 10:31:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:36 Set A/D data flow result=40 10:31:36 Set A/D channel type result=40 10:31:36 Set A/D encoding result=40 10:31:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:36 Set channel filter=0.000000e+000 result=40 10:31:36 Config A/D Result=40 10:31:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:36 Get A/D filter: -9.255963e+061 result=40 10:31:36 Get A/D value=-858993460 result=40 10:31:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:36 Aux= 10:31:36 Message to Camera, serial 113641 queued 10:32:13 Received message from Master: op=PointingHead serial=113654 10:32:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:32:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:32:13 Point started: ret=0 10:32:13 point_skyscan result=0 10:32:14 Check angles 10:32:14 SkyScan query 10:32:14 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 10:32:14 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 10:32:14 Check angles 10:32:14 SkyScan query 10:32:15 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 10:32:15 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 10:32:15 Check angles 10:32:15 SkyScan query 10:32:16 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 10:32:16 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 10:32:16 Check angles 10:32:16 SkyScan query 10:32:17 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 10:32:17 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 10:32:17 Check angles 10:32:17 SkyScan query 10:32:17 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:32:17 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:32:17 Check angles 10:32:17 SkyScan query 10:32:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:32:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:32:18 Message to Master queued w/err=0: serial=113654 error=0 10:32:23 Received message from Master: op=Filter serial=113655 10:32:23 Color wheel filter change from 0 to 0 10:32:23 FLIGetFilterPos err=0 currentPosition=0 10:32:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:23 Filter is already there-color wheel unchanged 10:32:23 Received message from Master: op=Shutter serial=113656 10:32:23 Shutter LASER close 10:32:23 Received message from Camera: op=State serial=113658 10:32:23 GetSingleValue result=40 Value=cccccccc 10:32:23 SkyScan query 10:32:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:32:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:24 Parameters OK 10:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:24 Set A/D data flow result=40 10:32:24 Set A/D channel type result=40 10:32:24 Set A/D encoding result=40 10:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:24 Set channel filter=0.000000e+000 result=40 10:32:24 Config A/D Result=40 10:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:24 Get A/D filter: -9.255963e+061 result=40 10:32:24 Get A/D value=-858993460 result=40 10:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:24 Parameters OK 10:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:24 Set A/D data flow result=40 10:32:24 Set A/D channel type result=40 10:32:24 Set A/D encoding result=40 10:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:24 Set channel filter=0.000000e+000 result=40 10:32:24 Config A/D Result=40 10:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:24 Get A/D filter: -9.255963e+061 result=40 10:32:24 Get A/D value=-858993460 result=40 10:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:24 Aux= 10:32:24 Message to Camera, serial 113658 queued 10:33:01 Received message from Master: op=PointingHead serial=113671 10:33:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:33:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:33:01 Point started: ret=0 10:33:01 point_skyscan result=0 10:33:02 Check angles 10:33:02 SkyScan query 10:33:02 SkyScan query done: ret=0 az=152.775<-10185 ze=8.325<-11445 Statuses=0009 0009 10:33:02 Msec=0 True Az=152.775 Ze=8.325 Az status=0009 Ze status=0009 10:33:03 Check angles 10:33:03 SkyScan query 10:33:03 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.495<-12833 Statuses=0009 0009 10:33:03 Msec=750 True Az=135.36 Ze=-12.495 Az status=0009 Ze status=0009 10:33:03 Check angles 10:33:03 SkyScan query 10:33:04 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.45<-14230 Statuses=0009 0009 10:33:04 Msec=1500 True Az=117.795 Ze=-33.45 Az status=0009 Ze status=0009 10:33:04 Check angles 10:33:04 SkyScan query 10:33:05 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 10:33:05 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 10:33:05 Check angles 10:33:05 SkyScan query 10:33:05 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:33:05 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:33:06 Check angles 10:33:06 SkyScan query 10:33:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:33:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:33:06 Message to Master queued w/err=0: serial=113671 error=0 10:33:11 Received message from Master: op=Filter serial=113672 10:33:11 Color wheel filter change from 0 to 0 10:33:11 FLIGetFilterPos err=0 currentPosition=0 10:33:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:11 Filter is already there-color wheel unchanged 10:33:11 Received message from Master: op=Shutter serial=113673 10:33:11 Shutter LASER close 10:33:11 Received message from Camera: op=State serial=113675 10:33:11 GetSingleValue result=40 Value=cccccccc 10:33:11 SkyScan query 10:33:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:33:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:12 Parameters OK 10:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:12 Set A/D data flow result=40 10:33:12 Set A/D channel type result=40 10:33:12 Set A/D encoding result=40 10:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:12 Set channel filter=0.000000e+000 result=40 10:33:12 Config A/D Result=40 10:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:12 Get A/D filter: -9.255963e+061 result=40 10:33:12 Get A/D value=-858993460 result=40 10:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:12 Parameters OK 10:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:12 Set A/D data flow result=40 10:33:12 Set A/D channel type result=40 10:33:12 Set A/D encoding result=40 10:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:12 Set channel filter=0.000000e+000 result=40 10:33:12 Config A/D Result=40 10:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:12 Get A/D filter: -9.255963e+061 result=40 10:33:12 Get A/D value=-858993460 result=40 10:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:12 Aux= 10:33:12 Message to Camera, serial 113675 queued 10:33:49 Received message from Master: op=PointingHead serial=113688 10:33:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:33:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:33:49 Point started: ret=0 10:33:49 point_skyscan result=0 10:33:50 Check angles 10:33:50 SkyScan query 10:33:50 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.105<-17407 Statuses=0009 0009 10:33:50 Msec=0 True Az=108.87 Ze=-81.105 Az status=0009 Ze status=0009 10:33:51 Check angles 10:33:51 SkyScan query 10:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 10:33:51 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 10:33:51 Check angles 10:33:51 SkyScan query 10:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 10:33:52 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 10:33:52 Check angles 10:33:52 SkyScan query 10:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 10:33:53 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 10:33:53 Check angles 10:33:53 SkyScan query 10:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 10:33:53 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 10:33:54 Check angles 10:33:54 SkyScan query 10:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:33:54 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:33:54 Message to Master queued w/err=0: serial=113688 error=0 10:33:59 Received message from Master: op=Filter serial=113689 10:33:59 Color wheel filter change from 0 to 0 10:33:59 FLIGetFilterPos err=0 currentPosition=0 10:33:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:59 Filter is already there-color wheel unchanged 10:33:59 Received message from Master: op=Shutter serial=113690 10:33:59 Shutter LASER open 10:34:00 Received message from Camera: op=State serial=113692 10:34:00 GetSingleValue result=40 Value=cccccccc 10:34:00 SkyScan query 10:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:34:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:00 Parameters OK 10:34:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:00 Set A/D data flow result=40 10:34:00 Set A/D channel type result=40 10:34:00 Set A/D encoding result=40 10:34:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:00 Set channel filter=0.000000e+000 result=40 10:34:00 Config A/D Result=40 10:34:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:00 Get A/D filter: -9.255963e+061 result=40 10:34:00 Get A/D value=-858993460 result=40 10:34:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:00 Parameters OK 10:34:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:00 Set A/D data flow result=40 10:34:00 Set A/D channel type result=40 10:34:00 Set A/D encoding result=40 10:34:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:00 Set channel filter=0.000000e+000 result=40 10:34:00 Config A/D Result=40 10:34:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:00 Get A/D filter: -9.255963e+061 result=40 10:34:00 Get A/D value=-858993460 result=40 10:34:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:00 Aux= 10:34:00 Message to Camera, serial 113692 queued 10:34:09 Received message from Master: op=Shutter serial=113702 10:34:09 Shutter LASER close 10:34:09 Received message from Master: op=PointingHead serial=113706 10:34:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:34:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:34:09 Point started: ret=0 10:34:09 point_skyscan result=0 10:34:10 Check angles 10:34:10 SkyScan query 10:34:11 SkyScan query done: ret=0 az=89.865<-5991 ze=157.47<-1502 Statuses=0009 0009 10:34:11 Msec=0 True Az=89.865 Ze=157.47 Az status=0009 Ze status=0009 10:34:11 Check angles 10:34:11 SkyScan query 10:34:11 SkyScan query done: ret=0 az=72.015<-4801 ze=136.02<-2932 Statuses=0009 0009 10:34:11 Msec=750 True Az=72.015 Ze=136.02 Az status=0009 Ze status=0009 10:34:12 Check angles 10:34:12 SkyScan query 10:34:12 SkyScan query done: ret=0 az=54.75<-3650 ze=115.125<-4325 Statuses=0009 0009 10:34:12 Msec=1500 True Az=54.75 Ze=115.125 Az status=0009 Ze status=0009 10:34:12 Check angles 10:34:12 SkyScan query 10:34:13 SkyScan query done: ret=0 az=40.935<-2729 ze=93.72<-5752 Statuses=0009 0009 10:34:13 Msec=2250 True Az=40.935 Ze=93.72 Az status=0009 Ze status=0009 10:34:13 Check angles 10:34:13 SkyScan query 10:34:14 SkyScan query done: ret=0 az=40.995<-2733 ze=72.735<-7151 Statuses=0008 0009 10:34:14 Msec=3000 True Az=40.995 Ze=72.735 Az status=0008 Ze status=0009 10:34:14 Check angles 10:34:14 SkyScan query 10:34:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 10:34:14 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 10:34:15 Check angles 10:34:15 SkyScan query 10:34:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:34:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:34:15 Message to Master queued w/err=0: serial=113706 error=0 10:34:20 Received message from Master: op=Filter serial=113707 10:34:20 Color wheel filter change from 0 to 0 10:34:20 FLIGetFilterPos err=0 currentPosition=0 10:34:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:20 Filter is already there-color wheel unchanged 10:34:20 Received message from Master: op=Shutter serial=113708 10:34:20 Shutter LASER close 10:34:21 Received message from Camera: op=State serial=113710 10:34:21 GetSingleValue result=40 Value=cccccccc 10:34:21 SkyScan query 10:34:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:34:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:21 Parameters OK 10:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:21 Set A/D data flow result=40 10:34:21 Set A/D channel type result=40 10:34:21 Set A/D encoding result=40 10:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:21 Set channel filter=0.000000e+000 result=40 10:34:21 Config A/D Result=40 10:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:21 Get A/D filter: -9.255963e+061 result=40 10:34:21 Get A/D value=-858993460 result=40 10:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:21 Parameters OK 10:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:21 Set A/D data flow result=40 10:34:21 Set A/D channel type result=40 10:34:21 Set A/D encoding result=40 10:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:21 Set channel filter=0.000000e+000 result=40 10:34:21 Config A/D Result=40 10:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:21 Get A/D filter: -9.255963e+061 result=40 10:34:21 Get A/D value=-858993460 result=40 10:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:21 Aux= 10:34:21 Message to Camera, serial 113710 queued 10:34:58 Received message from Master: op=PointingHead serial=113723 10:34:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:34:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:34:58 Point started: ret=0 10:34:58 point_skyscan result=0 10:34:59 Check angles 10:34:59 SkyScan query 10:35:00 SkyScan query done: ret=0 az=63.855<-4257 ze=66.54<-7564 Statuses=0009 0008 10:35:00 Msec=0 True Az=63.855 Ze=66.54 Az status=0009 Ze status=0008 10:35:00 Check angles 10:35:00 SkyScan query 10:35:00 SkyScan query done: ret=0 az=81.21<-5414 ze=66.51<-7566 Statuses=0009 0008 10:35:00 Msec=750 True Az=81.21 Ze=66.51 Az status=0009 Ze status=0008 10:35:01 Check angles 10:35:01 SkyScan query 10:35:01 SkyScan query done: ret=0 az=98.625<-6575 ze=66.495<-7567 Statuses=0009 0008 10:35:01 Msec=1500 True Az=98.625 Ze=66.495 Az status=0009 Ze status=0008 10:35:01 Check angles 10:35:01 SkyScan query 10:35:02 SkyScan query done: ret=0 az=116.13<-7742 ze=66.495<-7567 Statuses=0009 0008 10:35:02 Msec=2250 True Az=116.13 Ze=66.495 Az status=0009 Ze status=0008 10:35:02 Check angles 10:35:02 SkyScan query 10:35:03 SkyScan query done: ret=0 az=134.07<-8938 ze=66.495<-7567 Statuses=0009 0008 10:35:03 Msec=3000 True Az=134.07 Ze=66.495 Az status=0009 Ze status=0008 10:35:03 Check angles 10:35:03 SkyScan query 10:35:03 SkyScan query done: ret=0 az=151.47<-10098 ze=66.495<-7567 Statuses=0009 0008 10:35:03 Msec=3750 True Az=151.47 Ze=66.495 Az status=0009 Ze status=0008 10:35:04 Check angles 10:35:04 SkyScan query 10:35:04 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:35:04 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:35:04 Message to Master queued w/err=0: serial=113723 error=0 10:35:09 Received message from Master: op=Filter serial=113724 10:35:09 Color wheel filter change from 0 to 0 10:35:09 FLIGetFilterPos err=0 currentPosition=0 10:35:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:09 Filter is already there-color wheel unchanged 10:35:09 Received message from Master: op=Shutter serial=113725 10:35:09 Shutter LASER close 10:35:09 Received message from Camera: op=State serial=113727 10:35:09 GetSingleValue result=40 Value=cccccccc 10:35:09 SkyScan query 10:35:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:35:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:10 Parameters OK 10:35:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:10 Set A/D data flow result=40 10:35:10 Set A/D channel type result=40 10:35:10 Set A/D encoding result=40 10:35:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:10 Set channel filter=0.000000e+000 result=40 10:35:10 Config A/D Result=40 10:35:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:10 Get A/D filter: -9.255963e+061 result=40 10:35:10 Get A/D value=-858993460 result=40 10:35:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:10 Parameters OK 10:35:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:10 Set A/D data flow result=40 10:35:10 Set A/D channel type result=40 10:35:10 Set A/D encoding result=40 10:35:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:10 Set channel filter=0.000000e+000 result=40 10:35:10 Config A/D Result=40 10:35:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:10 Get A/D filter: -9.255963e+061 result=40 10:35:10 Get A/D value=-858993460 result=40 10:35:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:10 Aux= 10:35:10 Message to Camera, serial 113727 queued 10:35:46 Received message from Master: op=PointingHead serial=113739 10:35:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:35:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:35:46 Point started: ret=0 10:35:46 point_skyscan result=0 10:35:47 Check angles 10:35:47 SkyScan query 10:35:48 SkyScan query done: ret=0 az=134.595<-8973 ze=36.495<-9567 Statuses=0009 0009 10:35:48 Msec=0 True Az=134.595 Ze=36.495 Az status=0009 Ze status=0009 10:35:48 Check angles 10:35:48 SkyScan query 10:35:48 SkyScan query done: ret=0 az=117.225<-7815 ze=15.465<-10969 Statuses=0009 0009 10:35:48 Msec=750 True Az=117.225 Ze=15.465 Az status=0009 Ze status=0009 10:35:49 Check angles [UTC 2018-12-13 10:35:49] 10:35:49 SkyScan query 10:35:49 SkyScan query done: ret=0 az=98.31<-6554 ze=-7.215<-12481 Statuses=0009 0009 10:35:49 Msec=1500 True Az=98.31 Ze=-7.215 Az status=0009 Ze status=0009 10:35:49 Check angles 10:35:49 SkyScan query 10:35:50 SkyScan query done: ret=0 az=81.99<-5466 ze=-26.82<-13788 Statuses=0009 0009 10:35:50 Msec=2250 True Az=81.99 Ze=-26.82 Az status=0009 Ze status=0009 10:35:50 Check angles 10:35:50 SkyScan query 10:35:51 SkyScan query done: ret=0 az=64.455<-4297 ze=-38.565<-14571 Statuses=0009 0008 10:35:51 Msec=3000 True Az=64.455 Ze=-38.565 Az status=0009 Ze status=0008 10:35:51 Check angles 10:35:51 SkyScan query 10:35:51 SkyScan query done: ret=0 az=46.71<-3114 ze=-38.535<-14569 Statuses=0009 0008 10:35:51 Msec=3750 True Az=46.71 Ze=-38.535 Az status=0009 Ze status=0008 10:35:52 Check angles 10:35:52 SkyScan query 10:35:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:35:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:35:52 Message to Master queued w/err=0: serial=113739 error=0 [UTC 2018-12-13 10:35:52] 10:35:57 Received message from Master: op=Filter serial=113740 10:35:57 Color wheel filter change from 0 to 0 10:35:57 FLIGetFilterPos err=0 currentPosition=0 10:35:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:57 Filter is already there-color wheel unchanged 10:35:57 Received message from Master: op=Shutter serial=113741 10:35:57 Shutter LASER close 10:35:57 Received message from Camera: op=State serial=113743 10:35:57 GetSingleValue result=40 Value=cccccccc 10:35:57 SkyScan query 10:35:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:35:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:58 Parameters OK 10:35:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:58 Set A/D data flow result=40 10:35:58 Set A/D channel type result=40 10:35:58 Set A/D encoding result=40 10:35:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:58 Set channel filter=0.000000e+000 result=40 10:35:58 Config A/D Result=40 10:35:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:58 Get A/D filter: -9.255963e+061 result=40 10:35:58 Get A/D value=-858993460 result=40 10:35:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:58 Parameters OK 10:35:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:58 Set A/D data flow result=40 10:35:58 Set A/D channel type result=40 10:35:58 Set A/D encoding result=40 10:35:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:58 Set channel filter=0.000000e+000 result=40 10:35:58 Config A/D Result=40 10:35:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:58 Get A/D filter: -9.255963e+061 result=40 10:35:58 Get A/D value=-858993460 result=40 10:35:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:58 Aux= 10:35:58 Message to Camera, serial 113743 queued 10:36:35 Received message from Master: op=PointingHead serial=113756 10:36:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:36:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:36:35 Point started: ret=0 10:36:35 point_skyscan result=0 10:36:36 Check angles 10:36:36 SkyScan query 10:36:36 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.76<-16584 Statuses=0009 0009 10:36:36 Msec=0 True Az=64.41 Ze=-68.76 Az status=0009 Ze status=0009 10:36:37 Check angles 10:36:37 SkyScan query 10:36:37 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.73<-17982 Statuses=0009 0009 10:36:37 Msec=750 True Az=81.855 Ze=-89.73 Az status=0009 Ze status=0009 10:36:37 Check angles 10:36:37 SkyScan query 10:36:38 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.67<-19378 Statuses=0009 0009 10:36:38 Msec=1500 True Az=99.24 Ze=-110.67 Az status=0009 Ze status=0009 10:36:38 Check angles 10:36:38 SkyScan query 10:36:39 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.595<-20773 Statuses=0009 0009 10:36:39 Msec=2250 True Az=116.775 Ze=-131.595 Az status=0009 Ze status=0009 10:36:39 Check angles 10:36:39 SkyScan query 10:36:39 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 10:36:39 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 10:36:40 Check angles 10:36:40 SkyScan query 10:36:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:36:40 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:36:40 Message to Master queued w/err=0: serial=113756 error=0 10:36:45 Received message from Master: op=Filter serial=113757 10:36:45 Color wheel filter change from 0 to 0 10:36:45 FLIGetFilterPos err=0 currentPosition=0 10:36:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:45 Filter is already there-color wheel unchanged 10:36:45 Received message from Master: op=Shutter serial=113758 10:36:45 Shutter LASER close 10:36:45 Received message from Camera: op=State serial=113760 10:36:45 GetSingleValue result=40 Value=cccccccc 10:36:45 SkyScan query 10:36:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:36:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:46 Parameters OK 10:36:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:46 Set A/D data flow result=40 10:36:46 Set A/D channel type result=40 10:36:46 Set A/D encoding result=40 10:36:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:46 Set channel filter=0.000000e+000 result=40 10:36:46 Config A/D Result=40 10:36:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:46 Get A/D filter: -9.255963e+061 result=40 10:36:46 Get A/D value=-858993460 result=40 10:36:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:46 Parameters OK 10:36:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:46 Set A/D data flow result=40 10:36:46 Set A/D channel type result=40 10:36:46 Set A/D encoding result=40 10:36:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:46 Set channel filter=0.000000e+000 result=40 10:36:46 Config A/D Result=40 10:36:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:46 Get A/D filter: -9.255963e+061 result=40 10:36:46 Get A/D value=-858993460 result=40 10:36:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:46 Aux= 10:36:46 Message to Camera, serial 113760 queued 10:37:23 Received message from Master: op=PointingHead serial=113773 10:37:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:37:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:37:23 Point started: ret=0 10:37:23 point_skyscan result=0 10:37:24 Check angles 10:37:24 SkyScan query 10:37:24 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 10:37:24 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 10:37:25 Check angles 10:37:25 SkyScan query 10:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:37:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:37:25 Message to Master queued w/err=0: serial=113773 error=0 10:37:30 Received message from Master: op=Filter serial=113774 10:37:30 Color wheel filter change from 0 to 0 10:37:30 FLIGetFilterPos err=0 currentPosition=0 10:37:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:30 Filter is already there-color wheel unchanged 10:37:30 Received message from Master: op=Shutter serial=113775 10:37:30 Shutter LASER open 10:37:31 Received message from Camera: op=State serial=113777 10:37:31 GetSingleValue result=40 Value=cccccccc 10:37:31 SkyScan query 10:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:37:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:31 Parameters OK 10:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:31 Set A/D data flow result=40 10:37:31 Set A/D channel type result=40 10:37:31 Set A/D encoding result=40 10:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:31 Set channel filter=0.000000e+000 result=40 10:37:31 Config A/D Result=40 10:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:31 Get A/D filter: -9.255963e+061 result=40 10:37:31 Get A/D value=-858993460 result=40 10:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:31 Parameters OK 10:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:31 Set A/D data flow result=40 10:37:31 Set A/D channel type result=40 10:37:31 Set A/D encoding result=40 10:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:31 Set channel filter=0.000000e+000 result=40 10:37:31 Config A/D Result=40 10:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:31 Get A/D filter: -9.255963e+061 result=40 10:37:31 Get A/D value=-858993460 result=40 10:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:31 Aux= 10:37:31 Message to Camera, serial 113777 queued 10:37:40 Received message from Master: op=Shutter serial=113787 10:37:40 Shutter LASER close 10:37:40 Received message from Master: op=PointingHead serial=113791 10:37:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:37:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:37:41 Point started: ret=0 10:37:41 point_skyscan result=0 10:37:41 Check angles 10:37:41 SkyScan query 10:37:42 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.935<-21529 Statuses=0009 0009 10:37:42 Msec=0 True Az=136.23 Ze=-142.935 Az status=0009 Ze status=0009 10:37:42 Check angles 10:37:42 SkyScan query 10:37:43 SkyScan query done: ret=0 az=154.035<-10269 ze=-121.575<-20105 Statuses=0009 0009 10:37:43 Msec=750 True Az=154.035 Ze=-121.575 Az status=0009 Ze status=0009 10:37:43 Check angles 10:37:43 SkyScan query 10:37:43 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.485<-18699 Statuses=0009 0009 10:37:43 Msec=1500 True Az=171.57 Ze=-100.485 Az status=0009 Ze status=0009 10:37:44 Check angles 10:37:44 SkyScan query 10:37:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 10:37:44 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 10:37:44 Check angles 10:37:44 SkyScan query 10:37:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.23<-15882 Statuses=0008 0009 10:37:45 Msec=3000 True Az=176.01 Ze=-58.23 Az status=0008 Ze status=0009 10:37:45 Check angles 10:37:45 SkyScan query 10:37:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:37:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:37:46 Message to Master queued w/err=0: serial=113791 error=0 10:37:51 Received message from Master: op=Filter serial=113792 10:37:51 Color wheel filter change from 0 to 0 10:37:51 FLIGetFilterPos err=0 currentPosition=0 10:37:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:51 Filter is already there-color wheel unchanged 10:37:51 Received message from Master: op=Shutter serial=113793 10:37:51 Shutter LASER close 10:37:51 Received message from Camera: op=State serial=113795 10:37:51 GetSingleValue result=40 Value=cccccccc 10:37:51 SkyScan query 10:37:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:37:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:52 Parameters OK 10:37:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:52 Set A/D data flow result=40 10:37:52 Set A/D channel type result=40 10:37:52 Set A/D encoding result=40 10:37:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:52 Set channel filter=0.000000e+000 result=40 10:37:52 Config A/D Result=40 10:37:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:52 Get A/D filter: -9.255963e+061 result=40 10:37:52 Get A/D value=-858993460 result=40 10:37:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:52 Parameters OK 10:37:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:52 Set A/D data flow result=40 10:37:52 Set A/D channel type result=40 10:37:52 Set A/D encoding result=40 10:37:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:52 Set channel filter=0.000000e+000 result=40 10:37:52 Config A/D Result=40 10:37:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:52 Get A/D filter: -9.255963e+061 result=40 10:37:52 Get A/D value=-858993460 result=40 10:37:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:52 Aux= 10:37:52 Message to Camera, serial 113795 queued 10:38:28 Received message from Master: op=PointingHead serial=113808 10:38:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:38:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:38:29 Point started: ret=0 10:38:29 point_skyscan result=0 10:38:29 Check angles 10:38:29 SkyScan query 10:38:30 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.525<-13435 Statuses=0009 0009 10:38:30 Msec=0 True Az=152.745 Ze=-21.525 Az status=0009 Ze status=0009 10:38:30 Check angles 10:38:30 SkyScan query 10:38:31 SkyScan query done: ret=0 az=134.88<-8992 ze=-0.12<-12008 Statuses=0009 0009 10:38:31 Msec=750 True Az=134.88 Ze=-0.12 Az status=0009 Ze status=0009 10:38:31 Check angles 10:38:31 SkyScan query 10:38:32 SkyScan query done: ret=0 az=117.465<-7831 ze=20.835<-10611 Statuses=0009 0009 10:38:32 Msec=1500 True Az=117.465 Ze=20.835 Az status=0009 Ze status=0009 10:38:32 Check angles 10:38:32 SkyScan query 10:38:32 SkyScan query done: ret=0 az=100.065<-6671 ze=41.79<-9214 Statuses=0009 0009 10:38:32 Msec=2250 True Az=100.065 Ze=41.79 Az status=0009 Ze status=0009 10:38:32 Check angles 10:38:32 SkyScan query 10:38:33 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:38:33 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:38:33 Check angles 10:38:33 SkyScan query 10:38:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:38:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:38:34 Message to Master queued w/err=0: serial=113808 error=0 10:38:39 Received message from Master: op=Filter serial=113809 10:38:39 Color wheel filter change from 0 to 0 10:38:39 FLIGetFilterPos err=0 currentPosition=0 10:38:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:39 Filter is already there-color wheel unchanged 10:38:39 Received message from Master: op=Shutter serial=113810 10:38:39 Shutter LASER close 10:38:39 Received message from Camera: op=State serial=113812 10:38:39 GetSingleValue result=40 Value=cccccccc 10:38:39 SkyScan query 10:38:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:38:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:40 Parameters OK 10:38:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:40 Set A/D data flow result=40 10:38:40 Set A/D channel type result=40 10:38:40 Set A/D encoding result=40 10:38:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:40 Set channel filter=0.000000e+000 result=40 10:38:40 Config A/D Result=40 10:38:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:40 Get A/D filter: -9.255963e+061 result=40 10:38:40 Get A/D value=-858993460 result=40 10:38:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:40 Parameters OK 10:38:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:40 Set A/D data flow result=40 10:38:40 Set A/D channel type result=40 10:38:40 Set A/D encoding result=40 10:38:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:40 Set channel filter=0.000000e+000 result=40 10:38:40 Config A/D Result=40 10:38:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:40 Get A/D filter: -9.255963e+061 result=40 10:38:40 Get A/D value=-858993460 result=40 10:38:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:40 Aux= 10:38:40 Message to Camera, serial 113812 queued 10:39:16 Received message from Master: op=PointingHead serial=113825 10:39:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:39:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:39:17 Point started: ret=0 10:39:17 point_skyscan result=0 10:39:18 Check angles 10:39:18 SkyScan query 10:39:18 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 10:39:18 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 10:39:18 Check angles 10:39:18 SkyScan query 10:39:19 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 10:39:19 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 10:39:19 Check angles 10:39:19 SkyScan query 10:39:20 SkyScan query done: ret=0 az=144.09<-9606 ze=38.505<-9433 Statuses=0009 0008 10:39:20 Msec=1500 True Az=144.09 Ze=38.505 Az status=0009 Ze status=0008 10:39:20 Check angles 10:39:20 SkyScan query 10:39:20 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 10:39:20 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 10:39:21 Check angles 10:39:21 SkyScan query 10:39:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:39:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:39:21 Check angles 10:39:21 SkyScan query 10:39:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:39:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:39:22 Message to Master queued w/err=0: serial=113825 error=0 10:39:27 Received message from Master: op=Filter serial=113826 10:39:27 Color wheel filter change from 0 to 0 10:39:27 FLIGetFilterPos err=0 currentPosition=0 10:39:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:27 Filter is already there-color wheel unchanged 10:39:27 Received message from Master: op=Shutter serial=113827 10:39:27 Shutter LASER close 10:39:27 Received message from Camera: op=State serial=113829 10:39:27 GetSingleValue result=40 Value=cccccccc 10:39:27 SkyScan query 10:39:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:39:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:28 Parameters OK 10:39:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:28 Set A/D data flow result=40 10:39:28 Set A/D channel type result=40 10:39:28 Set A/D encoding result=40 10:39:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:28 Set channel filter=0.000000e+000 result=40 10:39:28 Config A/D Result=40 10:39:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:28 Get A/D filter: -9.255963e+061 result=40 10:39:28 Get A/D value=-858993460 result=40 10:39:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:28 Parameters OK 10:39:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:28 Set A/D data flow result=40 10:39:28 Set A/D channel type result=40 10:39:28 Set A/D encoding result=40 10:39:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:28 Set channel filter=0.000000e+000 result=40 10:39:28 Config A/D Result=40 10:39:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:28 Get A/D filter: -9.255963e+061 result=40 10:39:28 Get A/D value=-858993460 result=40 10:39:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:28 Aux= 10:39:28 Message to Camera, serial 113829 queued 10:40:05 Received message from Master: op=PointingHead serial=113842 10:40:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:40:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:40:05 Point started: ret=0 10:40:05 point_skyscan result=0 10:40:06 Check angles 10:40:06 SkyScan query 10:40:06 SkyScan query done: ret=0 az=152.925<-10195 ze=8.565<-11429 Statuses=0009 0009 10:40:06 Msec=0 True Az=152.925 Ze=8.565 Az status=0009 Ze status=0009 10:40:06 Check angles 10:40:06 SkyScan query 10:40:07 SkyScan query done: ret=0 az=135.03<-9002 ze=-12.81<-12854 Statuses=0009 0009 10:40:07 Msec=750 True Az=135.03 Ze=-12.81 Az status=0009 Ze status=0009 10:40:07 Check angles 10:40:07 SkyScan query 10:40:08 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.78<-14252 Statuses=0009 0009 10:40:08 Msec=1500 True Az=117.555 Ze=-33.78 Az status=0009 Ze status=0009 10:40:08 Check angles 10:40:08 SkyScan query 10:40:09 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 10:40:09 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 10:40:09 Check angles 10:40:09 SkyScan query 10:40:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:40:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:40:09 Check angles 10:40:09 SkyScan query 10:40:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:40:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:40:10 Message to Master queued w/err=0: serial=113842 error=0 10:40:15 Received message from Master: op=Filter serial=113843 10:40:15 Color wheel filter change from 0 to 0 10:40:15 FLIGetFilterPos err=0 currentPosition=0 10:40:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:15 Filter is already there-color wheel unchanged 10:40:15 Received message from Master: op=Shutter serial=113844 10:40:15 Shutter LASER close 10:40:15 Received message from Camera: op=State serial=113846 10:40:15 GetSingleValue result=40 Value=cccccccc 10:40:15 SkyScan query 10:40:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:40:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:16 Parameters OK 10:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:16 Set A/D data flow result=40 10:40:16 Set A/D channel type result=40 10:40:16 Set A/D encoding result=40 10:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:16 Set channel filter=0.000000e+000 result=40 10:40:16 Config A/D Result=40 10:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:16 Get A/D filter: -9.255963e+061 result=40 10:40:16 Get A/D value=-858993460 result=40 10:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:16 Parameters OK 10:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:16 Set A/D data flow result=40 10:40:16 Set A/D channel type result=40 10:40:16 Set A/D encoding result=40 10:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:16 Set channel filter=0.000000e+000 result=40 10:40:16 Config A/D Result=40 10:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:16 Get A/D filter: -9.255963e+061 result=40 10:40:16 Get A/D value=-858993460 result=40 10:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:16 Aux= 10:40:16 Message to Camera, serial 113846 queued 10:40:53 Received message from Master: op=PointingHead serial=113859 10:40:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:40:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:40:53 Point started: ret=0 10:40:53 point_skyscan result=0 10:40:54 Check angles 10:40:54 SkyScan query 10:40:54 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.645<-17443 Statuses=0009 0009 10:40:54 Msec=0 True Az=109.185 Ze=-81.645 Az status=0009 Ze status=0009 10:40:55 Check angles 10:40:55 SkyScan query 10:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.96<-18864 Statuses=0008 0009 10:40:55 Msec=750 True Az=112.995 Ze=-102.96 Az status=0008 Ze status=0009 10:40:55 Check angles 10:40:55 SkyScan query 10:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.915<-20261 Statuses=0008 0009 10:40:56 Msec=1500 True Az=112.995 Ze=-123.915 Az status=0008 Ze status=0009 10:40:56 Check angles 10:40:56 SkyScan query 10:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 10:40:57 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 10:40:57 Check angles 10:40:57 SkyScan query 10:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.215<-23081 Statuses=0008 0009 10:40:57 Msec=3000 True Az=112.995 Ze=-166.215 Az status=0008 Ze status=0009 10:40:58 Check angles 10:40:58 SkyScan query 10:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:40:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:40:58 Message to Master queued w/err=0: serial=113859 error=0 10:41:03 Received message from Master: op=Filter serial=113860 10:41:03 Color wheel filter change from 0 to 0 10:41:03 FLIGetFilterPos err=0 currentPosition=0 10:41:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:03 Filter is already there-color wheel unchanged 10:41:03 Received message from Master: op=Shutter serial=113861 10:41:03 Shutter LASER open 10:41:03 Received message from Camera: op=State serial=113863 10:41:03 GetSingleValue result=40 Value=cccccccc 10:41:03 SkyScan query 10:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:41:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:04 Parameters OK 10:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:04 Set A/D data flow result=40 10:41:04 Set A/D channel type result=40 10:41:04 Set A/D encoding result=40 10:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:04 Set channel filter=0.000000e+000 result=40 10:41:04 Config A/D Result=40 10:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:04 Get A/D filter: -9.255963e+061 result=40 10:41:04 Get A/D value=-858993460 result=40 10:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:04 Parameters OK 10:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:04 Set A/D data flow result=40 10:41:04 Set A/D channel type result=40 10:41:04 Set A/D encoding result=40 10:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:04 Set channel filter=0.000000e+000 result=40 10:41:04 Config A/D Result=40 10:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:04 Get A/D filter: -9.255963e+061 result=40 10:41:04 Get A/D value=-858993460 result=40 10:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:04 Aux= 10:41:04 Message to Camera, serial 113863 queued 10:41:12 Received message from Master: op=Shutter serial=113873 10:41:12 Shutter LASER close 10:41:13 Received message from Master: op=PointingHead serial=113877 10:41:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:41:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:41:13 Point started: ret=0 10:41:13 point_skyscan result=0 10:41:14 Check angles 10:41:14 SkyScan query 10:41:15 SkyScan query done: ret=0 az=89.625<-5975 ze=157.215<-1519 Statuses=0009 0009 10:41:15 Msec=0 True Az=89.625 Ze=157.215 Az status=0009 Ze status=0009 10:41:15 Check angles 10:41:15 SkyScan query 10:41:15 SkyScan query done: ret=0 az=72.27<-4818 ze=136.23<-2918 Statuses=0009 0009 10:41:15 Msec=750 True Az=72.27 Ze=136.23 Az status=0009 Ze status=0009 10:41:16 Check angles 10:41:16 SkyScan query 10:41:16 SkyScan query done: ret=0 az=54.87<-3658 ze=115.335<-4311 Statuses=0009 0009 10:41:16 Msec=1500 True Az=54.87 Ze=115.335 Az status=0009 Ze status=0009 10:41:16 Check angles 10:41:16 SkyScan query 10:41:17 SkyScan query done: ret=0 az=40.935<-2729 ze=94.32<-5712 Statuses=0009 0009 10:41:17 Msec=2250 True Az=40.935 Ze=94.32 Az status=0009 Ze status=0009 10:41:17 Check angles 10:41:17 SkyScan query 10:41:18 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 10:41:18 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 10:41:18 Check angles 10:41:18 SkyScan query 10:41:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 10:41:18 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 10:41:19 Check angles 10:41:19 SkyScan query 10:41:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:41:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:41:19 Message to Master queued w/err=0: serial=113877 error=0 10:41:24 Received message from Master: op=Filter serial=113878 10:41:24 Color wheel filter change from 0 to 0 10:41:24 FLIGetFilterPos err=0 currentPosition=0 10:41:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:24 Filter is already there-color wheel unchanged 10:41:24 Received message from Master: op=Shutter serial=113879 10:41:24 Shutter LASER close 10:41:24 Received message from Camera: op=State serial=113881 10:41:24 GetSingleValue result=40 Value=cccccccc 10:41:24 SkyScan query 10:41:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:25 Parameters OK 10:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:25 Set A/D data flow result=40 10:41:25 Set A/D channel type result=40 10:41:25 Set A/D encoding result=40 10:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:25 Set channel filter=0.000000e+000 result=40 10:41:25 Config A/D Result=40 10:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:25 Get A/D filter: -9.255963e+061 result=40 10:41:25 Get A/D value=-858993460 result=40 10:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:25 Parameters OK 10:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:25 Set A/D data flow result=40 10:41:25 Set A/D channel type result=40 10:41:25 Set A/D encoding result=40 10:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:25 Set channel filter=0.000000e+000 result=40 10:41:25 Config A/D Result=40 10:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:25 Get A/D filter: -9.255963e+061 result=40 10:41:25 Get A/D value=-858993460 result=40 10:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:25 Aux= 10:41:25 Message to Camera, serial 113881 queued 10:42:02 Received message from Master: op=PointingHead serial=113894 10:42:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:42:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:42:02 Point started: ret=0 10:42:02 point_skyscan result=0 10:42:03 Check angles 10:42:03 SkyScan query 10:42:04 SkyScan query done: ret=0 az=63.885<-4259 ze=66.555<-7563 Statuses=0009 0008 10:42:04 Msec=0 True Az=63.885 Ze=66.555 Az status=0009 Ze status=0008 10:42:04 Check angles 10:42:04 SkyScan query 10:42:04 SkyScan query done: ret=0 az=81.3<-5420 ze=66.51<-7566 Statuses=0009 0008 10:42:04 Msec=750 True Az=81.3 Ze=66.51 Az status=0009 Ze status=0008 10:42:04 Check angles 10:42:04 SkyScan query 10:42:05 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 10:42:05 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 10:42:05 Check angles 10:42:05 SkyScan query 10:42:06 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 10:42:06 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 10:42:06 Check angles 10:42:06 SkyScan query 10:42:07 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 10:42:07 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 10:42:07 Check angles 10:42:07 SkyScan query 10:42:07 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 10:42:07 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 10:42:07 Check angles 10:42:07 SkyScan query 10:42:08 SkyScan query done: ret=0 az=157.98<-10532 ze=66.495<-7567 Statuses=0008 0008 10:42:08 Msec=4500 True Az=157.98 Ze=66.495 Az status=0008 Ze status=0008 10:42:08 Message to Master queued w/err=0: serial=113894 error=0 10:42:13 Received message from Master: op=Filter serial=113895 10:42:13 Color wheel filter change from 0 to 0 10:42:13 FLIGetFilterPos err=0 currentPosition=0 10:42:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:13 Filter is already there-color wheel unchanged 10:42:13 Received message from Master: op=Shutter serial=113896 10:42:13 Shutter LASER close 10:42:13 Received message from Camera: op=State serial=113898 10:42:13 GetSingleValue result=40 Value=cccccccc 10:42:13 SkyScan query 10:42:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:42:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:14 Parameters OK 10:42:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:14 Set A/D data flow result=40 10:42:14 Set A/D channel type result=40 10:42:14 Set A/D encoding result=40 10:42:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:14 Set channel filter=0.000000e+000 result=40 10:42:14 Config A/D Result=40 10:42:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:14 Get A/D filter: -9.255963e+061 result=40 10:42:14 Get A/D value=-858993460 result=40 10:42:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:14 Parameters OK 10:42:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:14 Set A/D data flow result=40 10:42:14 Set A/D channel type result=40 10:42:14 Set A/D encoding result=40 10:42:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:14 Set channel filter=0.000000e+000 result=40 10:42:14 Config A/D Result=40 10:42:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:14 Get A/D filter: -9.255963e+061 result=40 10:42:14 Get A/D value=-858993460 result=40 10:42:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:14 Aux= 10:42:14 Message to Camera, serial 113898 queued 10:42:51 Received message from Master: op=PointingHead serial=113911 10:42:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:42:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:42:51 Point started: ret=0 10:42:51 point_skyscan result=0 10:42:52 Check angles 10:42:52 SkyScan query 10:42:52 SkyScan query done: ret=0 az=135.18<-9012 ze=36.93<-9538 Statuses=0009 0009 10:42:52 Msec=0 True Az=135.18 Ze=36.93 Az status=0009 Ze status=0009 10:42:53 Check angles 10:42:53 SkyScan query 10:42:53 SkyScan query done: ret=0 az=117.69<-7846 ze=15.96<-10936 Statuses=0009 0009 10:42:53 Msec=750 True Az=117.69 Ze=15.96 Az status=0009 Ze status=0009 10:42:53 Check angles 10:42:53 SkyScan query 10:42:54 SkyScan query done: ret=0 az=100.335<-6689 ze=-4.995<-12333 Statuses=0009 0009 10:42:54 Msec=1500 True Az=100.335 Ze=-4.995 Az status=0009 Ze status=0009 10:42:54 Check angles 10:42:54 SkyScan query 10:42:55 SkyScan query done: ret=0 az=82.785<-5519 ze=-25.965<-13731 Statuses=0009 0009 10:42:55 Msec=2250 True Az=82.785 Ze=-25.965 Az status=0009 Ze status=0009 10:42:55 Check angles 10:42:55 SkyScan query 10:42:55 SkyScan query done: ret=0 az=65.265<-4351 ze=-38.565<-14571 Statuses=0009 0008 10:42:55 Msec=3000 True Az=65.265 Ze=-38.565 Az status=0009 Ze status=0008 10:42:56 Check angles 10:42:56 SkyScan query 10:42:56 SkyScan query done: ret=0 az=47.85<-3190 ze=-38.535<-14569 Statuses=0009 0008 10:42:56 Msec=3750 True Az=47.85 Ze=-38.535 Az status=0009 Ze status=0008 10:42:56 Check angles 10:42:56 SkyScan query 10:42:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:42:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:42:57 Message to Master queued w/err=0: serial=113911 error=0 10:43:02 Received message from Master: op=Filter serial=113912 10:43:02 Color wheel filter change from 0 to 0 10:43:02 FLIGetFilterPos err=0 currentPosition=0 10:43:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:02 Filter is already there-color wheel unchanged 10:43:02 Received message from Master: op=Shutter serial=113913 10:43:02 Shutter LASER close 10:43:02 Received message from Camera: op=State serial=113915 10:43:02 GetSingleValue result=40 Value=cccccccc 10:43:02 SkyScan query 10:43:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:43:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:03 Parameters OK 10:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:03 Set A/D data flow result=40 10:43:03 Set A/D channel type result=40 10:43:03 Set A/D encoding result=40 10:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:03 Set channel filter=0.000000e+000 result=40 10:43:03 Config A/D Result=40 10:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:03 Get A/D filter: -9.255963e+061 result=40 10:43:03 Get A/D value=-858993460 result=40 10:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:03 Parameters OK 10:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:03 Set A/D data flow result=40 10:43:03 Set A/D channel type result=40 10:43:03 Set A/D encoding result=40 10:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:03 Set channel filter=0.000000e+000 result=40 10:43:03 Config A/D Result=40 10:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:03 Get A/D filter: -9.255963e+061 result=40 10:43:03 Get A/D value=-858993460 result=40 10:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:03 Aux= 10:43:03 Message to Camera, serial 113915 queued 10:43:40 Received message from Master: op=PointingHead serial=113928 10:43:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:43:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:43:40 Point started: ret=0 10:43:40 point_skyscan result=0 10:43:41 Check angles 10:43:41 SkyScan query 10:43:41 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.31<-16554 Statuses=0009 0009 10:43:41 Msec=0 True Az=64.005 Ze=-68.31 Az status=0009 Ze status=0009 10:43:41 Check angles 10:43:41 SkyScan query 10:43:42 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.31<-17954 Statuses=0009 0009 10:43:42 Msec=750 True Az=81.555 Ze=-89.31 Az status=0009 Ze status=0009 10:43:42 Check angles 10:43:42 SkyScan query 10:43:43 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.235<-19349 Statuses=0009 0009 10:43:43 Msec=1500 True Az=98.85 Ze=-110.235 Az status=0009 Ze status=0009 10:43:43 Check angles 10:43:43 SkyScan query 10:43:43 SkyScan query done: ret=0 az=116.415<-7761 ze=-131.22<-20748 Statuses=0009 0009 10:43:43 Msec=2250 True Az=116.415 Ze=-131.22 Az status=0009 Ze status=0009 10:43:44 Check angles 10:43:44 SkyScan query 10:43:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 10:43:44 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 10:43:44 Check angles 10:43:44 SkyScan query 10:43:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:43:45 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:43:45 Message to Master queued w/err=0: serial=113928 error=0 10:43:50 Received message from Master: op=Filter serial=113929 10:43:50 Color wheel filter change from 0 to 0 10:43:50 FLIGetFilterPos err=0 currentPosition=0 10:43:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:50 Filter is already there-color wheel unchanged 10:43:50 Received message from Master: op=Shutter serial=113930 10:43:50 Shutter LASER close 10:43:50 Received message from Camera: op=State serial=113932 10:43:50 GetSingleValue result=40 Value=cccccccc 10:43:50 SkyScan query 10:43:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:43:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:51 Parameters OK 10:43:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:51 Set A/D data flow result=40 10:43:51 Set A/D channel type result=40 10:43:51 Set A/D encoding result=40 10:43:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:51 Set channel filter=0.000000e+000 result=40 10:43:51 Config A/D Result=40 10:43:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:51 Get A/D filter: -9.255963e+061 result=40 10:43:51 Get A/D value=-858993460 result=40 10:43:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:51 Parameters OK 10:43:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:51 Set A/D data flow result=40 10:43:51 Set A/D channel type result=40 10:43:51 Set A/D encoding result=40 10:43:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:51 Set channel filter=0.000000e+000 result=40 10:43:51 Config A/D Result=40 10:43:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:51 Get A/D filter: -9.255963e+061 result=40 10:43:51 Get A/D value=-858993460 result=40 10:43:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:51 Aux= 10:43:51 Message to Camera, serial 113932 queued 10:44:28 Received message from Master: op=PointingHead serial=113945 10:44:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:44:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:44:28 Point started: ret=0 10:44:28 point_skyscan result=0 10:44:29 Check angles 10:44:29 SkyScan query 10:44:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 10:44:29 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 10:44:29 Check angles 10:44:29 SkyScan query 10:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:44:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:44:30 Message to Master queued w/err=0: serial=113945 error=0 10:44:35 Received message from Master: op=Filter serial=113946 10:44:35 Color wheel filter change from 0 to 0 10:44:35 FLIGetFilterPos err=0 currentPosition=0 10:44:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:35 Filter is already there-color wheel unchanged 10:44:35 Received message from Master: op=Shutter serial=113947 10:44:35 Shutter LASER open 10:44:35 Received message from Camera: op=State serial=113949 10:44:35 GetSingleValue result=40 Value=cccccccc 10:44:35 SkyScan query 10:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:44:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:36 Parameters OK 10:44:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:36 Set A/D data flow result=40 10:44:36 Set A/D channel type result=40 10:44:36 Set A/D encoding result=40 10:44:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:36 Set channel filter=0.000000e+000 result=40 10:44:36 Config A/D Result=40 10:44:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:36 Get A/D filter: -9.255963e+061 result=40 10:44:36 Get A/D value=-858993460 result=40 10:44:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:36 Parameters OK 10:44:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:36 Set A/D data flow result=40 10:44:36 Set A/D channel type result=40 10:44:36 Set A/D encoding result=40 10:44:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:36 Set channel filter=0.000000e+000 result=40 10:44:36 Config A/D Result=40 10:44:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:36 Get A/D filter: -9.255963e+061 result=40 10:44:36 Get A/D value=-858993460 result=40 10:44:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:36 Aux= 10:44:36 Message to Camera, serial 113949 queued 10:44:44 Received message from Master: op=Shutter serial=113959 10:44:44 Shutter LASER close 10:44:45 Received message from Master: op=PointingHead serial=113963 10:44:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:44:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:44:45 Point started: ret=0 10:44:45 point_skyscan result=0 10:44:46 Check angles 10:44:46 SkyScan query 10:44:47 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.055<-21537 Statuses=0009 0009 10:44:47 Msec=0 True Az=136.185 Ze=-143.055 Az status=0009 Ze status=0009 10:44:47 Check angles 10:44:47 SkyScan query 10:44:47 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.1<-20140 Statuses=0009 0009 10:44:47 Msec=750 True Az=153.57 Ze=-122.1 Az status=0009 Ze status=0009 10:44:48 Check angles 10:44:48 SkyScan query 10:44:48 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.19<-18746 Statuses=0009 0009 10:44:48 Msec=1500 True Az=171.105 Ze=-101.19 Az status=0009 Ze status=0009 10:44:48 Check angles 10:44:48 SkyScan query 10:44:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 10:44:49 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 10:44:49 Check angles 10:44:49 SkyScan query 10:44:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.265<-15951 Statuses=0008 0009 10:44:50 Msec=3000 True Az=176.01 Ze=-59.265 Az status=0008 Ze status=0009 10:44:50 Check angles 10:44:50 SkyScan query 10:44:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:44:50 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:44:50 Message to Master queued w/err=0: serial=113963 error=0 10:44:55 Received message from Master: op=Filter serial=113964 10:44:55 Color wheel filter change from 0 to 0 10:44:55 FLIGetFilterPos err=0 currentPosition=0 10:44:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:55 Filter is already there-color wheel unchanged 10:44:56 Received message from Master: op=Shutter serial=113965 10:44:56 Shutter LASER close 10:44:56 Received message from Camera: op=State serial=113967 10:44:56 GetSingleValue result=40 Value=cccccccc 10:44:56 SkyScan query 10:44:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:44:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:56 Parameters OK 10:44:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:56 Set A/D data flow result=40 10:44:56 Set A/D channel type result=40 10:44:56 Set A/D encoding result=40 10:44:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:56 Set channel filter=0.000000e+000 result=40 10:44:56 Config A/D Result=40 10:44:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:56 Get A/D filter: -9.255963e+061 result=40 10:44:56 Get A/D value=-858993460 result=40 10:44:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:56 Parameters OK 10:44:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:56 Set A/D data flow result=40 10:44:56 Set A/D channel type result=40 10:44:56 Set A/D encoding result=40 10:44:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:56 Set channel filter=0.000000e+000 result=40 10:44:56 Config A/D Result=40 10:44:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:56 Get A/D filter: -9.255963e+061 result=40 10:44:56 Get A/D value=-858993460 result=40 10:44:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:56 Aux= 10:44:56 Message to Camera, serial 113967 queued 10:45:27 Received message from Master: op=Identify serial=113970 10:45:33 Received message from Master: op=PointingHead serial=113983 10:45:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:45:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:45:34 Point started: ret=0 10:45:34 point_skyscan result=0 10:45:34 Check angles 10:45:34 SkyScan query 10:45:35 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.005<-13467 Statuses=0009 0009 10:45:35 Msec=0 True Az=153.195 Ze=-22.005 Az status=0009 Ze status=0009 10:45:35 Check angles 10:45:35 SkyScan query 10:45:36 SkyScan query done: ret=0 az=135.75<-9050 ze=-1.02<-12068 Statuses=0009 0009 10:45:36 Msec=750 True Az=135.75 Ze=-1.02 Az status=0009 Ze status=0009 10:45:36 Check angles 10:45:36 SkyScan query 10:45:36 SkyScan query done: ret=0 az=118.17<-7878 ze=19.935<-10671 Statuses=0009 0009 10:45:36 Msec=1500 True Az=118.17 Ze=19.935 Az status=0009 Ze status=0009 10:45:37 Check angles 10:45:37 SkyScan query 10:45:37 SkyScan query done: ret=0 az=100.77<-6718 ze=40.89<-9274 Statuses=0009 0009 10:45:37 Msec=2250 True Az=100.77 Ze=40.89 Az status=0009 Ze status=0009 10:45:37 Check angles 10:45:37 SkyScan query 10:45:38 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 10:45:38 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 10:45:38 Check angles 10:45:38 SkyScan query 10:45:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:45:39 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:45:39 Message to Master queued w/err=0: serial=113983 error=0 10:45:44 Received message from Master: op=Filter serial=113984 10:45:44 Color wheel filter change from 0 to 0 10:45:44 FLIGetFilterPos err=0 currentPosition=0 10:45:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:44 Filter is already there-color wheel unchanged 10:45:44 Received message from Master: op=Shutter serial=113985 10:45:44 Shutter LASER close 10:45:44 Received message from Camera: op=State serial=113987 10:45:44 GetSingleValue result=40 Value=cccccccc 10:45:44 SkyScan query 10:45:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:45:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:44 Parameters OK 10:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:44 Set A/D data flow result=40 10:45:44 Set A/D channel type result=40 10:45:44 Set A/D encoding result=40 10:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-13 10:45:44] 10:45:44 Set channel filter=0.000000e+000 result=40 10:45:44 Config A/D Result=40 10:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:44 Get A/D filter: -9.255963e+061 result=40 10:45:44 Get A/D value=-858993460 result=40 10:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:44 Parameters OK 10:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:44 Set A/D data flow result=40 10:45:44 Set A/D channel type result=40 10:45:44 Set A/D encoding result=40 10:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:44 Set channel filter=0.000000e+000 result=40 10:45:44 Config A/D Result=40 10:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:44 Get A/D filter: -9.255963e+061 result=40 10:45:44 Get A/D value=-858993460 result=40 10:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:44 Aux= 10:45:44 Message to Camera, serial 113987 queued 10:46:21 Received message from Master: op=PointingHead serial=114000 10:46:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:46:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:46:22 Point started: ret=0 10:46:22 point_skyscan result=0 10:46:22 Check angles 10:46:22 SkyScan query 10:46:23 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 10:46:23 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 10:46:23 Check angles 10:46:23 SkyScan query 10:46:24 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 10:46:24 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 10:46:24 Check angles 10:46:24 SkyScan query 10:46:24 SkyScan query done: ret=0 az=143.97<-9598 ze=38.505<-9433 Statuses=0009 0008 10:46:24 Msec=1500 True Az=143.97 Ze=38.505 Az status=0009 Ze status=0008 10:46:25 Check angles 10:46:25 SkyScan query 10:46:25 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 10:46:25 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 10:46:25 Check angles 10:46:25 SkyScan query 10:46:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:46:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:46:26 Check angles 10:46:26 SkyScan query 10:46:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:46:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:46:27 Message to Master queued w/err=0: serial=114000 error=0 10:46:32 Received message from Master: op=Filter serial=114001 10:46:32 Color wheel filter change from 0 to 0 10:46:32 FLIGetFilterPos err=0 currentPosition=0 10:46:32 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:32 Filter is already there-color wheel unchanged 10:46:32 Received message from Master: op=Shutter serial=114002 10:46:32 Shutter LASER close 10:46:32 Received message from Camera: op=State serial=114004 10:46:32 GetSingleValue result=40 Value=cccccccc 10:46:32 SkyScan query 10:46:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:46:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:32 Parameters OK 10:46:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:32 Set A/D data flow result=40 10:46:32 Set A/D channel type result=40 10:46:32 Set A/D encoding result=40 10:46:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:32 Set channel filter=0.000000e+000 result=40 10:46:32 Config A/D Result=40 10:46:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:32 Get A/D filter: -9.255963e+061 result=40 10:46:32 Get A/D value=-858993460 result=40 10:46:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:32 Parameters OK 10:46:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:32 Set A/D data flow result=40 10:46:32 Set A/D channel type result=40 10:46:32 Set A/D encoding result=40 10:46:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:32 Set channel filter=0.000000e+000 result=40 10:46:32 Config A/D Result=40 10:46:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:32 Get A/D filter: -9.255963e+061 result=40 10:46:32 Get A/D value=-858993460 result=40 10:46:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:32 Aux= 10:46:32 Message to Camera, serial 114004 queued 10:47:09 Received message from Master: op=PointingHead serial=114017 10:47:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:47:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:47:10 Point started: ret=0 10:47:10 point_skyscan result=0 10:47:10 Check angles 10:47:10 SkyScan query 10:47:11 SkyScan query done: ret=0 az=153.21<-10214 ze=8.925<-11405 Statuses=0009 0009 10:47:11 Msec=0 True Az=153.21 Ze=8.925 Az status=0009 Ze status=0009 10:47:11 Check angles 10:47:11 SkyScan query 10:47:12 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.465<-12831 Statuses=0009 0009 10:47:12 Msec=750 True Az=135.405 Ze=-12.465 Az status=0009 Ze status=0009 10:47:12 Check angles 10:47:12 SkyScan query 10:47:13 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.36<-14224 Statuses=0009 0009 10:47:13 Msec=1500 True Az=117.765 Ze=-33.36 Az status=0009 Ze status=0009 10:47:13 Check angles 10:47:13 SkyScan query 10:47:13 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 10:47:13 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 10:47:13 Check angles 10:47:13 SkyScan query 10:47:14 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:47:14 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:47:14 Check angles 10:47:14 SkyScan query 10:47:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:47:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:47:15 Message to Master queued w/err=0: serial=114017 error=0 10:47:20 Received message from Master: op=Filter serial=114018 10:47:20 Color wheel filter change from 0 to 0 10:47:20 FLIGetFilterPos err=0 currentPosition=0 10:47:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:20 Filter is already there-color wheel unchanged 10:47:20 Received message from Master: op=Shutter serial=114019 10:47:20 Shutter LASER close 10:47:20 Received message from Camera: op=State serial=114021 10:47:20 GetSingleValue result=40 Value=cccccccc 10:47:20 SkyScan query 10:47:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:47:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:21 Parameters OK 10:47:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:21 Set A/D data flow result=40 10:47:21 Set A/D channel type result=40 10:47:21 Set A/D encoding result=40 10:47:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:21 Set channel filter=0.000000e+000 result=40 10:47:21 Config A/D Result=40 10:47:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:21 Get A/D filter: -9.255963e+061 result=40 10:47:21 Get A/D value=-858993460 result=40 10:47:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:21 Parameters OK 10:47:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:21 Set A/D data flow result=40 10:47:21 Set A/D channel type result=40 10:47:21 Set A/D encoding result=40 10:47:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:21 Set channel filter=0.000000e+000 result=40 10:47:21 Config A/D Result=40 10:47:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:21 Get A/D filter: -9.255963e+061 result=40 10:47:21 Get A/D value=-858993460 result=40 10:47:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:21 Aux= 10:47:21 Message to Camera, serial 114021 queued 10:47:57 Received message from Master: op=PointingHead serial=114034 10:47:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:47:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:47:58 Point started: ret=0 10:47:58 point_skyscan result=0 10:47:59 Check angles 10:47:59 SkyScan query 10:47:59 SkyScan query done: ret=0 az=109.455<-7297 ze=-81.87<-17458 Statuses=0009 0009 10:47:59 Msec=0 True Az=109.455 Ze=-81.87 Az status=0009 Ze status=0009 10:47:59 Check angles 10:47:59 SkyScan query 10:48:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.84<-18856 Statuses=0008 0009 10:48:00 Msec=750 True Az=112.995 Ze=-102.84 Az status=0008 Ze status=0009 10:48:00 Check angles 10:48:00 SkyScan query 10:48:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.78<-20252 Statuses=0008 0009 10:48:01 Msec=1500 True Az=112.995 Ze=-123.78 Az status=0008 Ze status=0009 10:48:01 Check angles 10:48:01 SkyScan query 10:48:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 10:48:01 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 10:48:02 Check angles 10:48:02 SkyScan query 10:48:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 10:48:02 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 10:48:02 Check angles 10:48:02 SkyScan query 10:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:48:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:48:03 Message to Master queued w/err=0: serial=114034 error=0 10:48:08 Received message from Master: op=Filter serial=114035 10:48:08 Color wheel filter change from 0 to 0 10:48:08 FLIGetFilterPos err=0 currentPosition=0 10:48:08 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:08 Filter is already there-color wheel unchanged 10:48:08 Received message from Master: op=Shutter serial=114036 10:48:08 Shutter LASER open 10:48:08 Received message from Camera: op=State serial=114038 10:48:08 GetSingleValue result=40 Value=cccccccc 10:48:08 SkyScan query 10:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:48:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:09 Parameters OK 10:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:09 Set A/D data flow result=40 10:48:09 Set A/D channel type result=40 10:48:09 Set A/D encoding result=40 10:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:09 Set channel filter=0.000000e+000 result=40 10:48:09 Config A/D Result=40 10:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:09 Get A/D filter: -9.255963e+061 result=40 10:48:09 Get A/D value=-858993460 result=40 10:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:09 Parameters OK 10:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:09 Set A/D data flow result=40 10:48:09 Set A/D channel type result=40 10:48:09 Set A/D encoding result=40 10:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:09 Set channel filter=0.000000e+000 result=40 10:48:09 Config A/D Result=40 10:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:09 Get A/D filter: -9.255963e+061 result=40 10:48:09 Get A/D value=-858993460 result=40 10:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:09 Aux= 10:48:09 Message to Camera, serial 114038 queued 10:48:17 Received message from Master: op=Shutter serial=114048 10:48:17 Shutter LASER close 10:48:18 Received message from Master: op=PointingHead serial=114052 10:48:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:48:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:48:18 Point started: ret=0 10:48:18 point_skyscan result=0 10:48:19 Check angles 10:48:19 SkyScan query 10:48:19 SkyScan query done: ret=0 az=89.52<-5968 ze=156.63<-1558 Statuses=0009 0009 10:48:19 Msec=0 True Az=89.52 Ze=156.63 Az status=0009 Ze status=0009 10:48:20 Check angles 10:48:20 SkyScan query 10:48:20 SkyScan query done: ret=0 az=71.55<-4770 ze=135.345<-2977 Statuses=0009 0009 10:48:20 Msec=750 True Az=71.55 Ze=135.345 Az status=0009 Ze status=0009 10:48:20 Check angles 10:48:20 SkyScan query 10:48:21 SkyScan query done: ret=0 az=54.375<-3625 ze=114.375<-4375 Statuses=0009 0009 10:48:21 Msec=1500 True Az=54.375 Ze=114.375 Az status=0009 Ze status=0009 10:48:21 Check angles 10:48:21 SkyScan query 10:48:22 SkyScan query done: ret=0 az=40.95<-2730 ze=93.45<-5770 Statuses=0009 0009 10:48:22 Msec=2250 True Az=40.95 Ze=93.45 Az status=0009 Ze status=0009 10:48:22 Check angles 10:48:22 SkyScan query 10:48:22 SkyScan query done: ret=0 az=40.995<-2733 ze=72.045<-7197 Statuses=0008 0009 10:48:22 Msec=3000 True Az=40.995 Ze=72.045 Az status=0008 Ze status=0009 10:48:23 Check angles 10:48:23 SkyScan query 10:48:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.08<-8528 Statuses=0008 0009 10:48:23 Msec=3750 True Az=40.995 Ze=52.08 Az status=0008 Ze status=0009 10:48:23 Check angles 10:48:23 SkyScan query 10:48:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:48:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:48:24 Message to Master queued w/err=0: serial=114052 error=0 10:48:29 Received message from Master: op=Filter serial=114053 10:48:29 Color wheel filter change from 0 to 0 10:48:29 FLIGetFilterPos err=0 currentPosition=0 10:48:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:29 Filter is already there-color wheel unchanged 10:48:29 Received message from Master: op=Shutter serial=114054 10:48:29 Shutter LASER close 10:48:29 Received message from Camera: op=State serial=114056 10:48:29 GetSingleValue result=40 Value=cccccccc 10:48:29 SkyScan query 10:48:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:48:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:30 Parameters OK 10:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:30 Set A/D data flow result=40 10:48:30 Set A/D channel type result=40 10:48:30 Set A/D encoding result=40 10:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:30 Set channel filter=0.000000e+000 result=40 10:48:30 Config A/D Result=40 10:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:30 Get A/D filter: -9.255963e+061 result=40 10:48:30 Get A/D value=-858993460 result=40 10:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:30 Parameters OK 10:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:30 Set A/D data flow result=40 10:48:30 Set A/D channel type result=40 10:48:30 Set A/D encoding result=40 10:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:30 Set channel filter=0.000000e+000 result=40 10:48:30 Config A/D Result=40 10:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:30 Get A/D filter: -9.255963e+061 result=40 10:48:30 Get A/D value=-858993460 result=40 10:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:30 Aux= 10:48:30 Message to Camera, serial 114056 queued 10:49:07 Received message from Master: op=PointingHead serial=114069 10:49:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:49:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:49:07 Point started: ret=0 10:49:07 point_skyscan result=0 10:49:08 Check angles 10:49:08 SkyScan query 10:49:08 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 10:49:08 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 10:49:08 Check angles 10:49:08 SkyScan query 10:49:09 SkyScan query done: ret=0 az=81.375<-5425 ze=66.495<-7567 Statuses=0009 0008 10:49:09 Msec=750 True Az=81.375 Ze=66.495 Az status=0009 Ze status=0008 10:49:09 Check angles 10:49:09 SkyScan query 10:49:10 SkyScan query done: ret=0 az=99.285<-6619 ze=66.495<-7567 Statuses=0009 0008 10:49:10 Msec=1500 True Az=99.285 Ze=66.495 Az status=0009 Ze status=0008 10:49:10 Check angles 10:49:10 SkyScan query 10:49:11 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 10:49:11 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 10:49:11 Check angles 10:49:11 SkyScan query 10:49:11 SkyScan query done: ret=0 az=134.295<-8953 ze=66.495<-7567 Statuses=0009 0008 10:49:11 Msec=3000 True Az=134.295 Ze=66.495 Az status=0009 Ze status=0008 10:49:11 Check angles 10:49:11 SkyScan query 10:49:12 SkyScan query done: ret=0 az=151.995<-10133 ze=66.495<-7567 Statuses=0009 0008 10:49:12 Msec=3750 True Az=151.995 Ze=66.495 Az status=0009 Ze status=0008 10:49:12 Check angles 10:49:12 SkyScan query 10:49:13 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:49:13 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:49:13 Message to Master queued w/err=0: serial=114069 error=0 10:49:18 Received message from Master: op=Filter serial=114070 10:49:18 Color wheel filter change from 0 to 0 10:49:18 FLIGetFilterPos err=0 currentPosition=0 10:49:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:18 Filter is already there-color wheel unchanged 10:49:18 Received message from Master: op=Shutter serial=114071 10:49:18 Shutter LASER close 10:49:18 Received message from Camera: op=State serial=114073 10:49:18 GetSingleValue result=40 Value=cccccccc 10:49:18 SkyScan query 10:49:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:49:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:19 Parameters OK 10:49:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:19 Set A/D data flow result=40 10:49:19 Set A/D channel type result=40 10:49:19 Set A/D encoding result=40 10:49:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:19 Set channel filter=0.000000e+000 result=40 10:49:19 Config A/D Result=40 10:49:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:19 Get A/D filter: -9.255963e+061 result=40 10:49:19 Get A/D value=-858993460 result=40 10:49:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:19 Parameters OK 10:49:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:19 Set A/D data flow result=40 10:49:19 Set A/D channel type result=40 10:49:19 Set A/D encoding result=40 10:49:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:19 Set channel filter=0.000000e+000 result=40 10:49:19 Config A/D Result=40 10:49:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:19 Get A/D filter: -9.255963e+061 result=40 10:49:19 Get A/D value=-858993460 result=40 10:49:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:19 Aux= 10:49:19 Message to Camera, serial 114073 queued 10:49:56 Received message from Master: op=PointingHead serial=114086 10:49:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:49:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:49:56 Point started: ret=0 10:49:56 point_skyscan result=0 10:49:57 Check angles 10:49:57 SkyScan query 10:49:57 SkyScan query done: ret=0 az=134.58<-8972 ze=36.39<-9574 Statuses=0009 0009 10:49:57 Msec=0 True Az=134.58 Ze=36.39 Az status=0009 Ze status=0009 10:49:57 Check angles 10:49:57 SkyScan query 10:49:58 SkyScan query done: ret=0 az=117.225<-7815 ze=15.495<-10967 Statuses=0009 0009 10:49:58 Msec=750 True Az=117.225 Ze=15.495 Az status=0009 Ze status=0009 10:49:58 Check angles 10:49:58 SkyScan query 10:49:59 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.52<-12368 Statuses=0009 0009 10:49:59 Msec=1500 True Az=99.84 Ze=-5.52 Az status=0009 Ze status=0009 10:49:59 Check angles 10:49:59 SkyScan query 10:49:59 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.46<-13764 Statuses=0009 0009 10:49:59 Msec=2250 True Az=82.365 Ze=-26.46 Az status=0009 Ze status=0009 10:50:00 Check angles 10:50:00 SkyScan query 10:50:00 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.58<-14572 Statuses=0009 0008 10:50:00 Msec=3000 True Az=64.86 Ze=-38.58 Az status=0009 Ze status=0008 10:50:00 Check angles 10:50:00 SkyScan query 10:50:01 SkyScan query done: ret=0 az=47.43<-3162 ze=-38.52<-14568 Statuses=0009 0008 10:50:01 Msec=3750 True Az=47.43 Ze=-38.52 Az status=0009 Ze status=0008 10:50:01 Check angles 10:50:01 SkyScan query 10:50:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:50:02 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:50:02 Message to Master queued w/err=0: serial=114086 error=0 10:50:07 Received message from Master: op=Filter serial=114087 10:50:07 Color wheel filter change from 0 to 0 10:50:07 FLIGetFilterPos err=0 currentPosition=0 10:50:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:07 Filter is already there-color wheel unchanged 10:50:07 Received message from Master: op=Shutter serial=114088 10:50:07 Shutter LASER close 10:50:07 Received message from Camera: op=State serial=114090 10:50:07 GetSingleValue result=40 Value=cccccccc 10:50:07 SkyScan query 10:50:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:50:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:08 Parameters OK 10:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:08 Set A/D data flow result=40 10:50:08 Set A/D channel type result=40 10:50:08 Set A/D encoding result=40 10:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:08 Set channel filter=0.000000e+000 result=40 10:50:08 Config A/D Result=40 10:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:08 Get A/D filter: -9.255963e+061 result=40 10:50:08 Get A/D value=-858993460 result=40 10:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:08 Parameters OK 10:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:08 Set A/D data flow result=40 10:50:08 Set A/D channel type result=40 10:50:08 Set A/D encoding result=40 10:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:08 Set channel filter=0.000000e+000 result=40 10:50:08 Config A/D Result=40 10:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:08 Get A/D filter: -9.255963e+061 result=40 10:50:08 Get A/D value=-858993460 result=40 10:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:08 Aux= 10:50:08 Message to Camera, serial 114090 queued 10:50:44 Received message from Master: op=PointingHead serial=114103 10:50:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:50:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:50:45 Point started: ret=0 10:50:45 point_skyscan result=0 10:50:45 Check angles 10:50:45 SkyScan query 10:50:46 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.22<-16548 Statuses=0009 0009 10:50:46 Msec=0 True Az=63.945 Ze=-68.22 Az status=0009 Ze status=0009 10:50:46 Check angles 10:50:46 SkyScan query 10:50:47 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.235<-17949 Statuses=0009 0009 10:50:47 Msec=750 True Az=81.39 Ze=-89.235 Az status=0009 Ze status=0009 10:50:47 Check angles 10:50:47 SkyScan query 10:50:48 SkyScan query done: ret=0 az=98.775<-6585 ze=-110.19<-19346 Statuses=0009 0009 10:50:48 Msec=1500 True Az=98.775 Ze=-110.19 Az status=0009 Ze status=0009 10:50:48 Check angles 10:50:48 SkyScan query 10:50:48 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.565<-20771 Statuses=0009 0009 10:50:48 Msec=2250 True Az=116.745 Ze=-131.565 Az status=0009 Ze status=0009 10:50:48 Check angles 10:50:48 SkyScan query 10:50:49 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 10:50:49 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 10:50:49 Check angles 10:50:49 SkyScan query 10:50:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:50:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:50:50 Message to Master queued w/err=0: serial=114103 error=0 10:50:55 Received message from Master: op=Filter serial=114104 10:50:55 Color wheel filter change from 0 to 0 10:50:55 FLIGetFilterPos err=0 currentPosition=0 10:50:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:55 Filter is already there-color wheel unchanged 10:50:55 Received message from Master: op=Shutter serial=114105 10:50:55 Shutter LASER close 10:50:55 Received message from Camera: op=State serial=114107 10:50:55 GetSingleValue result=40 Value=cccccccc 10:50:55 SkyScan query 10:50:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:50:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:56 Parameters OK 10:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:56 Set A/D data flow result=40 10:50:56 Set A/D channel type result=40 10:50:56 Set A/D encoding result=40 10:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:56 Set channel filter=0.000000e+000 result=40 10:50:56 Config A/D Result=40 10:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:56 Get A/D filter: -9.255963e+061 result=40 10:50:56 Get A/D value=-858993460 result=40 10:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:56 Parameters OK 10:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:56 Set A/D data flow result=40 10:50:56 Set A/D channel type result=40 10:50:56 Set A/D encoding result=40 10:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:56 Set channel filter=0.000000e+000 result=40 10:50:56 Config A/D Result=40 10:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:56 Get A/D filter: -9.255963e+061 result=40 10:50:56 Get A/D value=-858993460 result=40 10:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:56 Aux= 10:50:56 Message to Camera, serial 114107 queued 10:51:31 Received message from Master: op=PointingHead serial=114119 10:51:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:51:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:51:32 Point started: ret=0 10:51:32 point_skyscan result=0 10:51:33 Check angles 10:51:33 SkyScan query 10:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.255<-23417 Statuses=0009 0009 10:51:33 Msec=0 True Az=112.995 Ze=-171.255 Az status=0009 Ze status=0009 10:51:33 Check angles 10:51:33 SkyScan query 10:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:51:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:51:34 Message to Master queued w/err=0: serial=114119 error=0 10:51:39 Received message from Master: op=Filter serial=114120 10:51:39 Color wheel filter change from 0 to 0 10:51:39 FLIGetFilterPos err=0 currentPosition=0 10:51:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:39 Filter is already there-color wheel unchanged 10:51:39 Received message from Master: op=Shutter serial=114121 10:51:39 Shutter LASER open 10:51:39 Received message from Camera: op=State serial=114123 10:51:39 GetSingleValue result=40 Value=cccccccc 10:51:39 SkyScan query 10:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:51:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:40 Parameters OK 10:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:40 Set A/D data flow result=40 10:51:40 Set A/D channel type result=40 10:51:40 Set A/D encoding result=40 10:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:40 Set channel filter=0.000000e+000 result=40 10:51:40 Config A/D Result=40 10:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:40 Get A/D filter: -9.255963e+061 result=40 10:51:40 Get A/D value=-858993460 result=40 10:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:40 Parameters OK 10:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:40 Set A/D data flow result=40 10:51:40 Set A/D channel type result=40 10:51:40 Set A/D encoding result=40 10:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:40 Set channel filter=0.000000e+000 result=40 10:51:40 Config A/D Result=40 10:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:40 Get A/D filter: -9.255963e+061 result=40 10:51:40 Get A/D value=-858993460 result=40 10:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:40 Aux= 10:51:40 Message to Camera, serial 114123 queued 10:51:48 Received message from Master: op=Shutter serial=114133 10:51:48 Shutter LASER close 10:51:49 Received message from Master: op=PointingHead serial=114137 10:51:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:51:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:51:49 Point started: ret=0 10:51:49 point_skyscan result=0 10:51:50 Check angles 10:51:50 SkyScan query 10:51:51 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.815<-21521 Statuses=0009 0009 10:51:51 Msec=0 True Az=136.365 Ze=-142.815 Az status=0009 Ze status=0009 10:51:51 Check angles 10:51:51 SkyScan query 10:51:51 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.86<-20124 Statuses=0009 0009 10:51:51 Msec=750 True Az=153.81 Ze=-121.86 Az status=0009 Ze status=0009 10:51:51 Check angles 10:51:51 SkyScan query 10:51:52 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.89<-18726 Statuses=0009 0009 10:51:52 Msec=1500 True Az=171.255 Ze=-100.89 Az status=0009 Ze status=0009 10:51:52 Check angles 10:51:52 SkyScan query 10:51:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 10:51:53 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 10:51:53 Check angles 10:51:53 SkyScan query 10:51:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.98<-15932 Statuses=0008 0009 10:51:54 Msec=3000 True Az=176.01 Ze=-58.98 Az status=0008 Ze status=0009 10:51:54 Check angles 10:51:54 SkyScan query 10:51:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:51:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:51:54 Message to Master queued w/err=0: serial=114137 error=0 10:51:59 Received message from Master: op=Filter serial=114138 10:51:59 Color wheel filter change from 0 to 0 10:51:59 FLIGetFilterPos err=0 currentPosition=0 10:51:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:59 Filter is already there-color wheel unchanged 10:51:59 Received message from Master: op=Shutter serial=114139 10:51:59 Shutter LASER close 10:52:00 Received message from Camera: op=State serial=114141 10:52:00 GetSingleValue result=40 Value=cccccccc 10:52:00 SkyScan query 10:52:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:52:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:00 Parameters OK 10:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:00 Set A/D data flow result=40 10:52:00 Set A/D channel type result=40 10:52:00 Set A/D encoding result=40 10:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:00 Set channel filter=0.000000e+000 result=40 10:52:00 Config A/D Result=40 10:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:00 Get A/D filter: -9.255963e+061 result=40 10:52:00 Get A/D value=-858993460 result=40 10:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:00 Parameters OK 10:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:00 Set A/D data flow result=40 10:52:00 Set A/D channel type result=40 10:52:00 Set A/D encoding result=40 10:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:00 Set channel filter=0.000000e+000 result=40 10:52:00 Config A/D Result=40 10:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:00 Get A/D filter: -9.255963e+061 result=40 10:52:00 Get A/D value=-858993460 result=40 10:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:00 Aux= 10:52:00 Message to Camera, serial 114141 queued 10:52:37 Received message from Master: op=PointingHead serial=114154 10:52:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:52:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:52:37 Point started: ret=0 10:52:37 point_skyscan result=0 10:52:38 Check angles 10:52:38 SkyScan query 10:52:39 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.15<-13410 Statuses=0009 0009 10:52:39 Msec=0 True Az=152.595 Ze=-21.15 Az status=0009 Ze status=0009 10:52:39 Check angles 10:52:39 SkyScan query 10:52:40 SkyScan query done: ret=0 az=135.075<-9005 ze=-0.21<-12014 Statuses=0009 0009 10:52:40 Msec=750 True Az=135.075 Ze=-0.21 Az status=0009 Ze status=0009 10:52:40 Check angles 10:52:40 SkyScan query 10:52:40 SkyScan query done: ret=0 az=117.48<-7832 ze=20.73<-10618 Statuses=0009 0009 10:52:40 Msec=1500 True Az=117.48 Ze=20.73 Az status=0009 Ze status=0009 10:52:40 Check angles 10:52:40 SkyScan query 10:52:41 SkyScan query done: ret=0 az=100.215<-6681 ze=41.685<-9221 Statuses=0009 0009 10:52:41 Msec=2250 True Az=100.215 Ze=41.685 Az status=0009 Ze status=0009 10:52:41 Check angles 10:52:41 SkyScan query 10:52:42 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 10:52:42 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 10:52:42 Check angles 10:52:42 SkyScan query 10:52:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:52:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:52:43 Message to Master queued w/err=0: serial=114154 error=0 10:52:48 Received message from Master: op=Filter serial=114155 10:52:48 Color wheel filter change from 0 to 0 10:52:48 FLIGetFilterPos err=0 currentPosition=0 10:52:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:48 Filter is already there-color wheel unchanged 10:52:48 Received message from Master: op=Shutter serial=114156 10:52:48 Shutter LASER close 10:52:48 Received message from Camera: op=State serial=114158 10:52:48 GetSingleValue result=40 Value=cccccccc 10:52:48 SkyScan query 10:52:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:52:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:48 Parameters OK 10:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:48 Set A/D data flow result=40 10:52:48 Set A/D channel type result=40 10:52:48 Set A/D encoding result=40 10:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:48 Set channel filter=0.000000e+000 result=40 10:52:48 Config A/D Result=40 10:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:48 Get A/D filter: -9.255963e+061 result=40 10:52:48 Get A/D value=-858993460 result=40 10:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:48 Parameters OK 10:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:48 Set A/D data flow result=40 10:52:48 Set A/D channel type result=40 10:52:48 Set A/D encoding result=40 10:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:48 Set channel filter=0.000000e+000 result=40 10:52:48 Config A/D Result=40 10:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:48 Get A/D filter: -9.255963e+061 result=40 10:52:48 Get A/D value=-858993460 result=40 10:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:48 Aux= 10:52:48 Message to Camera, serial 114158 queued 10:53:25 Received message from Master: op=PointingHead serial=114171 10:53:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:53:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:53:25 Point started: ret=0 10:53:25 point_skyscan result=0 10:53:26 Check angles 10:53:26 SkyScan query 10:53:27 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 10:53:27 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 10:53:27 Check angles 10:53:27 SkyScan query 10:53:28 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 10:53:28 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 10:53:28 Check angles 10:53:28 SkyScan query 10:53:28 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 10:53:28 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 10:53:28 Check angles 10:53:28 SkyScan query 10:53:29 SkyScan query done: ret=0 az=161.655<-10777 ze=38.505<-9433 Statuses=0009 0008 10:53:29 Msec=2250 True Az=161.655 Ze=38.505 Az status=0009 Ze status=0008 10:53:29 Check angles 10:53:29 SkyScan query 10:53:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:53:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:53:30 Check angles 10:53:30 SkyScan query 10:53:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:53:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:53:31 Message to Master queued w/err=0: serial=114171 error=0 10:53:36 Received message from Master: op=Filter serial=114172 10:53:36 Color wheel filter change from 0 to 0 10:53:36 FLIGetFilterPos err=0 currentPosition=0 10:53:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:36 Filter is already there-color wheel unchanged 10:53:36 Received message from Master: op=Shutter serial=114173 10:53:36 Shutter LASER close 10:53:36 Received message from Camera: op=State serial=114175 10:53:36 GetSingleValue result=40 Value=cccccccc 10:53:36 SkyScan query 10:53:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:53:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:36 Parameters OK 10:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:36 Set A/D data flow result=40 10:53:36 Set A/D channel type result=40 10:53:36 Set A/D encoding result=40 10:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:36 Set channel filter=0.000000e+000 result=40 10:53:36 Config A/D Result=40 10:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:36 Get A/D filter: -9.255963e+061 result=40 10:53:36 Get A/D value=-858993460 result=40 10:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:36 Parameters OK 10:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:36 Set A/D data flow result=40 10:53:36 Set A/D channel type result=40 10:53:36 Set A/D encoding result=40 10:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:36 Set channel filter=0.000000e+000 result=40 10:53:36 Config A/D Result=40 10:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:36 Get A/D filter: -9.255963e+061 result=40 10:53:36 Get A/D value=-858993460 result=40 10:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:36 Aux= 10:53:36 Message to Camera, serial 114175 queued 10:54:13 Received message from Master: op=PointingHead serial=114188 10:54:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:54:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:54:14 Point started: ret=0 10:54:14 point_skyscan result=0 10:54:14 Check angles 10:54:14 SkyScan query 10:54:15 SkyScan query done: ret=0 az=152.925<-10195 ze=8.61<-11426 Statuses=0009 0009 10:54:15 Msec=0 True Az=152.925 Ze=8.61 Az status=0009 Ze status=0009 10:54:15 Check angles 10:54:15 SkyScan query 10:54:16 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.345<-12823 Statuses=0009 0009 10:54:16 Msec=750 True Az=135.39 Ze=-12.345 Az status=0009 Ze status=0009 10:54:16 Check angles 10:54:16 SkyScan query 10:54:16 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.27<-14218 Statuses=0009 0009 10:54:16 Msec=1500 True Az=117.93 Ze=-33.27 Az status=0009 Ze status=0009 10:54:17 Check angles 10:54:17 SkyScan query 10:54:17 SkyScan query done: ret=0 az=100.53<-6702 ze=-51.54<-15436 Statuses=0009 0009 10:54:17 Msec=2250 True Az=100.53 Ze=-51.54 Az status=0009 Ze status=0009 10:54:17 Check angles 10:54:17 SkyScan query 10:54:18 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:54:18 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:54:18 Check angles 10:54:18 SkyScan query 10:54:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:54:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:54:19 Message to Master queued w/err=0: serial=114188 error=0 10:54:24 Received message from Master: op=Filter serial=114189 10:54:24 Color wheel filter change from 0 to 0 10:54:24 FLIGetFilterPos err=0 currentPosition=0 10:54:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:24 Filter is already there-color wheel unchanged 10:54:24 Received message from Master: op=Shutter serial=114190 10:54:24 Shutter LASER close 10:54:24 Received message from Camera: op=State serial=114192 10:54:24 GetSingleValue result=40 Value=cccccccc 10:54:24 SkyScan query 10:54:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:54:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:24 Parameters OK 10:54:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:24 Set A/D data flow result=40 10:54:24 Set A/D channel type result=40 10:54:24 Set A/D encoding result=40 10:54:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:24 Set channel filter=0.000000e+000 result=40 10:54:24 Config A/D Result=40 10:54:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:24 Get A/D filter: -9.255963e+061 result=40 10:54:24 Get A/D value=-858993460 result=40 10:54:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:24 Parameters OK 10:54:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:24 Set A/D data flow result=40 10:54:24 Set A/D channel type result=40 10:54:24 Set A/D encoding result=40 10:54:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:24 Set channel filter=0.000000e+000 result=40 10:54:24 Config A/D Result=40 10:54:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:24 Get A/D filter: -9.255963e+061 result=40 10:54:24 Get A/D value=-858993460 result=40 10:54:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:24 Aux= 10:54:24 Message to Camera, serial 114192 queued 10:55:01 Received message from Master: op=PointingHead serial=114205 10:55:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:55:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:55:02 Point started: ret=0 10:55:02 point_skyscan result=0 10:55:02 Check angles 10:55:02 SkyScan query 10:55:03 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.435<-17429 Statuses=0009 0009 10:55:03 Msec=0 True Az=109.14 Ze=-81.435 Az status=0009 Ze status=0009 10:55:03 Check angles 10:55:03 SkyScan query 10:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.39<-18826 Statuses=0008 0009 10:55:04 Msec=750 True Az=112.995 Ze=-102.39 Az status=0008 Ze status=0009 10:55:04 Check angles 10:55:04 SkyScan query 10:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.78<-20252 Statuses=0008 0009 10:55:04 Msec=1500 True Az=112.995 Ze=-123.78 Az status=0008 Ze status=0009 10:55:05 Check angles 10:55:05 SkyScan query 10:55:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 10:55:05 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 10:55:05 Check angles 10:55:05 SkyScan query 10:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 10:55:06 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 10:55:06 Check angles 10:55:06 SkyScan query 10:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:55:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:55:07 Message to Master queued w/err=0: serial=114205 error=0 10:55:12 Received message from Master: op=Filter serial=114206 10:55:12 Color wheel filter change from 0 to 0 10:55:12 FLIGetFilterPos err=0 currentPosition=0 10:55:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:12 Filter is already there-color wheel unchanged 10:55:12 Received message from Master: op=Shutter serial=114207 10:55:12 Shutter LASER open 10:55:12 Received message from Camera: op=State serial=114209 10:55:12 GetSingleValue result=40 Value=cccccccc 10:55:12 SkyScan query 10:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:55:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:13 Parameters OK 10:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:13 Set A/D data flow result=40 10:55:13 Set A/D channel type result=40 10:55:13 Set A/D encoding result=40 10:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:13 Set channel filter=0.000000e+000 result=40 10:55:13 Config A/D Result=40 10:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:13 Get A/D filter: -9.255963e+061 result=40 10:55:13 Get A/D value=-858993460 result=40 10:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:13 Parameters OK 10:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:13 Set A/D data flow result=40 10:55:13 Set A/D channel type result=40 10:55:13 Set A/D encoding result=40 10:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:13 Set channel filter=0.000000e+000 result=40 10:55:13 Config A/D Result=40 10:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:13 Get A/D filter: -9.255963e+061 result=40 10:55:13 Get A/D value=-858993460 result=40 10:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:13 Aux= 10:55:13 Message to Camera, serial 114209 queued 10:55:21 Received message from Master: op=Shutter serial=114219 10:55:21 Shutter LASER close 10:55:22 Received message from Master: op=PointingHead serial=114223 10:55:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:55:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:55:22 Point started: ret=0 10:55:22 point_skyscan result=0 10:55:23 Check angles 10:55:23 SkyScan query 10:55:23 SkyScan query done: ret=0 az=89.58<-5972 ze=156.885<-1541 Statuses=0009 0009 10:55:23 Msec=0 True Az=89.58 Ze=156.885 Az status=0009 Ze status=0009 10:55:23 Check angles 10:55:23 SkyScan query 10:55:24 SkyScan query done: ret=0 az=72.06<-4804 ze=135.945<-2937 Statuses=0009 0009 10:55:24 Msec=750 True Az=72.06 Ze=135.945 Az status=0009 Ze status=0009 10:55:24 Check angles 10:55:24 SkyScan query 10:55:25 SkyScan query done: ret=0 az=54.405<-3627 ze=114.51<-4366 Statuses=0009 0009 10:55:25 Msec=1500 True Az=54.405 Ze=114.51 Az status=0009 Ze status=0009 10:55:25 Check angles 10:55:25 SkyScan query 10:55:25 SkyScan query done: ret=0 az=40.935<-2729 ze=93.585<-5761 Statuses=0009 0009 10:55:25 Msec=2250 True Az=40.935 Ze=93.585 Az status=0009 Ze status=0009 10:55:26 Check angles 10:55:26 SkyScan query 10:55:26 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 10:55:26 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 10:55:26 Check angles 10:55:26 SkyScan query 10:55:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 10:55:27 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 10:55:27 Check angles 10:55:27 SkyScan query 10:55:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:55:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:55:28 Message to Master queued w/err=0: serial=114223 error=0 10:55:33 Received message from Master: op=Filter serial=114224 10:55:33 Color wheel filter change from 0 to 0 10:55:33 FLIGetFilterPos err=0 currentPosition=0 10:55:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:33 Filter is already there-color wheel unchanged 10:55:33 Received message from Master: op=Shutter serial=114225 10:55:33 Shutter LASER close 10:55:33 Received message from Camera: op=State serial=114227 10:55:33 GetSingleValue result=40 Value=cccccccc 10:55:33 SkyScan query 10:55:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:55:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:34 Parameters OK 10:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:34 Set A/D data flow result=40 10:55:34 Set A/D channel type result=40 10:55:34 Set A/D encoding result=40 [UTC 2018-12-13 10:55:34] 10:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:34 Set channel filter=0.000000e+000 result=40 10:55:34 Config A/D Result=40 10:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:34 Get A/D filter: -9.255963e+061 result=40 10:55:34 Get A/D value=-858993460 result=40 10:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:34 Parameters OK 10:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:34 Set A/D data flow result=40 10:55:34 Set A/D channel type result=40 10:55:34 Set A/D encoding result=40 10:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:34 Set channel filter=0.000000e+000 result=40 10:55:34 Config A/D Result=40 10:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:34 Get A/D filter: -9.255963e+061 result=40 10:55:34 Get A/D value=-858993460 result=40 10:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:34 Aux= 10:55:34 Message to Camera, serial 114227 queued [UTC 2018-12-13 10:55:52] 10:56:10 Received message from Master: op=PointingHead serial=114240 10:56:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:56:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:56:11 Point started: ret=0 10:56:11 point_skyscan result=0 10:56:12 Check angles 10:56:12 SkyScan query 10:56:12 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 10:56:12 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 10:56:12 Check angles 10:56:12 SkyScan query 10:56:13 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 10:56:13 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 10:56:13 Check angles 10:56:13 SkyScan query 10:56:14 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 10:56:14 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 10:56:14 Check angles 10:56:14 SkyScan query 10:56:14 SkyScan query done: ret=0 az=116.85<-7790 ze=66.495<-7567 Statuses=0009 0008 10:56:14 Msec=2250 True Az=116.85 Ze=66.495 Az status=0009 Ze status=0008 10:56:15 Check angles 10:56:15 SkyScan query 10:56:15 SkyScan query done: ret=0 az=134.34<-8956 ze=66.495<-7567 Statuses=0009 0008 10:56:15 Msec=3000 True Az=134.34 Ze=66.495 Az status=0009 Ze status=0008 10:56:15 Check angles 10:56:15 SkyScan query 10:56:16 SkyScan query done: ret=0 az=151.635<-10109 ze=66.495<-7567 Statuses=0009 0008 10:56:16 Msec=3750 True Az=151.635 Ze=66.495 Az status=0009 Ze status=0008 10:56:16 Check angles 10:56:16 SkyScan query 10:56:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:56:17 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 10:56:17 Message to Master queued w/err=0: serial=114240 error=0 10:56:22 Received message from Master: op=Filter serial=114241 10:56:22 Color wheel filter change from 0 to 0 10:56:22 FLIGetFilterPos err=0 currentPosition=0 10:56:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:22 Filter is already there-color wheel unchanged 10:56:22 Received message from Master: op=Shutter serial=114242 10:56:22 Shutter LASER close 10:56:22 Received message from Camera: op=State serial=114244 10:56:22 GetSingleValue result=40 Value=cccccccc 10:56:22 SkyScan query 10:56:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:56:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:22 Parameters OK 10:56:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:22 Set A/D data flow result=40 10:56:22 Set A/D channel type result=40 10:56:22 Set A/D encoding result=40 10:56:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:22 Set channel filter=0.000000e+000 result=40 10:56:22 Config A/D Result=40 10:56:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:22 Get A/D filter: -9.255963e+061 result=40 10:56:22 Get A/D value=-858993460 result=40 10:56:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:22 Parameters OK 10:56:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:22 Set A/D data flow result=40 10:56:22 Set A/D channel type result=40 10:56:22 Set A/D encoding result=40 10:56:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:22 Set channel filter=0.000000e+000 result=40 10:56:22 Config A/D Result=40 10:56:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:22 Get A/D filter: -9.255963e+061 result=40 10:56:22 Get A/D value=-858993460 result=40 10:56:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:22 Aux= 10:56:22 Message to Camera, serial 114244 queued 10:56:59 Received message from Master: op=PointingHead serial=114257 10:56:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:56:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:57:00 Point started: ret=0 10:57:00 point_skyscan result=0 10:57:00 Check angles 10:57:00 SkyScan query 10:57:01 SkyScan query done: ret=0 az=134.535<-8969 ze=36.225<-9585 Statuses=0009 0009 10:57:01 Msec=0 True Az=134.535 Ze=36.225 Az status=0009 Ze status=0009 10:57:01 Check angles 10:57:01 SkyScan query 10:57:02 SkyScan query done: ret=0 az=116.685<-7779 ze=14.82<-11012 Statuses=0009 0009 10:57:02 Msec=750 True Az=116.685 Ze=14.82 Az status=0009 Ze status=0009 10:57:02 Check angles 10:57:02 SkyScan query 10:57:03 SkyScan query done: ret=0 az=99.21<-6614 ze=-6.12<-12408 Statuses=0009 0009 10:57:03 Msec=1500 True Az=99.21 Ze=-6.12 Az status=0009 Ze status=0009 10:57:03 Check angles 10:57:03 SkyScan query 10:57:03 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.09<-13806 Statuses=0009 0009 10:57:03 Msec=2250 True Az=81.81 Ze=-27.09 Az status=0009 Ze status=0009 10:57:03 Check angles 10:57:03 SkyScan query 10:57:04 SkyScan query done: ret=0 az=64.23<-4282 ze=-38.565<-14571 Statuses=0009 0008 10:57:04 Msec=3000 True Az=64.23 Ze=-38.565 Az status=0009 Ze status=0008 10:57:04 Check angles 10:57:04 SkyScan query 10:57:05 SkyScan query done: ret=0 az=46.905<-3127 ze=-38.535<-14569 Statuses=0009 0008 10:57:05 Msec=3750 True Az=46.905 Ze=-38.535 Az status=0009 Ze status=0008 10:57:05 Check angles 10:57:05 SkyScan query 10:57:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:57:06 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:57:06 Message to Master queued w/err=0: serial=114257 error=0 10:57:11 Received message from Master: op=Filter serial=114258 10:57:11 Color wheel filter change from 0 to 0 10:57:11 FLIGetFilterPos err=0 currentPosition=0 10:57:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:11 Filter is already there-color wheel unchanged 10:57:11 Received message from Master: op=Shutter serial=114259 10:57:11 Shutter LASER close 10:57:11 Received message from Camera: op=State serial=114261 10:57:11 GetSingleValue result=40 Value=cccccccc 10:57:11 SkyScan query 10:57:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:57:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:11 Parameters OK 10:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:11 Set A/D data flow result=40 10:57:11 Set A/D channel type result=40 10:57:11 Set A/D encoding result=40 10:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:11 Set channel filter=0.000000e+000 result=40 10:57:11 Config A/D Result=40 10:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:11 Get A/D filter: -9.255963e+061 result=40 10:57:11 Get A/D value=-858993460 result=40 10:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:11 Parameters OK 10:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:11 Set A/D data flow result=40 10:57:11 Set A/D channel type result=40 10:57:11 Set A/D encoding result=40 10:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:11 Set channel filter=0.000000e+000 result=40 10:57:11 Config A/D Result=40 10:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:11 Get A/D filter: -9.255963e+061 result=40 10:57:11 Get A/D value=-858993460 result=40 10:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:11 Aux= 10:57:11 Message to Camera, serial 114261 queued 10:57:48 Received message from Master: op=PointingHead serial=114274 10:57:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:57:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:57:49 Point started: ret=0 10:57:49 point_skyscan result=0 10:57:49 Check angles 10:57:49 SkyScan query 10:57:50 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.46<-16564 Statuses=0009 0009 10:57:50 Msec=0 True Az=64.2 Ze=-68.46 Az status=0009 Ze status=0009 10:57:50 Check angles 10:57:50 SkyScan query 10:57:51 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.445<-17963 Statuses=0009 0009 10:57:51 Msec=750 True Az=81.57 Ze=-89.445 Az status=0009 Ze status=0009 10:57:51 Check angles 10:57:51 SkyScan query 10:57:51 SkyScan query done: ret=0 az=99<-6600 ze=-110.505<-19367 Statuses=0009 0009 10:57:51 Msec=1500 True Az=99 Ze=-110.505 Az status=0009 Ze status=0009 10:57:52 Check angles 10:57:52 SkyScan query 10:57:52 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.355<-20757 Statuses=0009 0009 10:57:52 Msec=2250 True Az=116.61 Ze=-131.355 Az status=0009 Ze status=0009 10:57:52 Check angles 10:57:52 SkyScan query 10:57:53 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 10:57:53 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 10:57:53 Check angles 10:57:53 SkyScan query 10:57:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:57:54 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:57:54 Message to Master queued w/err=0: serial=114274 error=0 10:57:59 Received message from Master: op=Filter serial=114275 10:57:59 Color wheel filter change from 0 to 0 10:57:59 FLIGetFilterPos err=0 currentPosition=0 10:57:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:59 Filter is already there-color wheel unchanged 10:57:59 Received message from Master: op=Shutter serial=114276 10:57:59 Shutter LASER close 10:57:59 Received message from Camera: op=State serial=114278 10:57:59 GetSingleValue result=40 Value=cccccccc 10:57:59 SkyScan query 10:57:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:57:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:59 Parameters OK 10:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:59 Set A/D data flow result=40 10:57:59 Set A/D channel type result=40 10:57:59 Set A/D encoding result=40 10:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:59 Set channel filter=0.000000e+000 result=40 10:57:59 Config A/D Result=40 10:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:59 Get A/D filter: -9.255963e+061 result=40 10:57:59 Get A/D value=-858993460 result=40 10:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:59 Parameters OK 10:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:59 Set A/D data flow result=40 10:57:59 Set A/D channel type result=40 10:57:59 Set A/D encoding result=40 10:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:59 Set channel filter=0.000000e+000 result=40 10:57:59 Config A/D Result=40 10:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:59 Get A/D filter: -9.255963e+061 result=40 10:57:59 Get A/D value=-858993460 result=40 10:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:59 Aux= 10:57:59 Message to Camera, serial 114278 queued 10:58:36 Received message from Master: op=PointingHead serial=114291 10:58:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:58:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:58:37 Point started: ret=0 10:58:37 point_skyscan result=0 10:58:37 Check angles 10:58:37 SkyScan query 10:58:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 10:58:38 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 10:58:38 Check angles 10:58:38 SkyScan query 10:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:58:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:58:39 Message to Master queued w/err=0: serial=114291 error=0 10:58:44 Received message from Master: op=Filter serial=114292 10:58:44 Color wheel filter change from 0 to 0 10:58:44 FLIGetFilterPos err=0 currentPosition=0 10:58:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:44 Filter is already there-color wheel unchanged 10:58:44 Received message from Master: op=Shutter serial=114293 10:58:44 Shutter LASER open 10:58:44 Received message from Camera: op=State serial=114295 10:58:44 GetSingleValue result=40 Value=cccccccc 10:58:44 SkyScan query 10:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:58:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:45 Parameters OK 10:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:45 Set A/D data flow result=40 10:58:45 Set A/D channel type result=40 10:58:45 Set A/D encoding result=40 10:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:45 Set channel filter=0.000000e+000 result=40 10:58:45 Config A/D Result=40 10:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:45 Get A/D filter: -9.255963e+061 result=40 10:58:45 Get A/D value=-858993460 result=40 10:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:45 Parameters OK 10:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:45 Set A/D data flow result=40 10:58:45 Set A/D channel type result=40 10:58:45 Set A/D encoding result=40 10:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:45 Set channel filter=0.000000e+000 result=40 10:58:45 Config A/D Result=40 10:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:45 Get A/D filter: -9.255963e+061 result=40 10:58:45 Get A/D value=-858993460 result=40 10:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:45 Aux= 10:58:45 Message to Camera, serial 114295 queued 10:58:53 Received message from Master: op=Shutter serial=114305 10:58:53 Shutter LASER close 10:58:54 Received message from Master: op=PointingHead serial=114309 10:58:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:58:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:58:54 Point started: ret=0 10:58:54 point_skyscan result=0 10:58:55 Check angles 10:58:55 SkyScan query 10:58:55 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.37<-21558 Statuses=0009 0009 10:58:55 Msec=0 True Az=135.84 Ze=-143.37 Az status=0009 Ze status=0009 10:58:56 Check angles 10:58:56 SkyScan query 10:58:56 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.995<-20133 Statuses=0009 0009 10:58:56 Msec=750 True Az=153.705 Ze=-121.995 Az status=0009 Ze status=0009 10:58:56 Check angles 10:58:56 SkyScan query 10:58:57 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.1<-18740 Statuses=0009 0009 10:58:57 Msec=1500 True Az=171.105 Ze=-101.1 Az status=0009 Ze status=0009 10:58:57 Check angles 10:58:57 SkyScan query 10:58:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.145<-17343 Statuses=0008 0009 10:58:58 Msec=2250 True Az=176.01 Ze=-80.145 Az status=0008 Ze status=0009 10:58:58 Check angles 10:58:58 SkyScan query 10:58:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.175<-15945 Statuses=0008 0009 10:58:58 Msec=3000 True Az=176.01 Ze=-59.175 Az status=0008 Ze status=0009 10:58:59 Check angles 10:58:59 SkyScan query 10:58:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:58:59 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:58:59 Message to Master queued w/err=0: serial=114309 error=0 10:59:04 Received message from Master: op=Filter serial=114310 10:59:04 Color wheel filter change from 0 to 0 10:59:04 FLIGetFilterPos err=0 currentPosition=0 10:59:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:04 Filter is already there-color wheel unchanged 10:59:04 Received message from Master: op=Shutter serial=114311 10:59:04 Shutter LASER close 10:59:04 Received message from Camera: op=State serial=114313 10:59:04 GetSingleValue result=40 Value=cccccccc 10:59:04 SkyScan query 10:59:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:59:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:05 Parameters OK 10:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:05 Set A/D data flow result=40 10:59:05 Set A/D channel type result=40 10:59:05 Set A/D encoding result=40 10:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:05 Set channel filter=0.000000e+000 result=40 10:59:05 Config A/D Result=40 10:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:05 Get A/D filter: -9.255963e+061 result=40 10:59:05 Get A/D value=-858993460 result=40 10:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:05 Parameters OK 10:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:05 Set A/D data flow result=40 10:59:05 Set A/D channel type result=40 10:59:05 Set A/D encoding result=40 10:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:05 Set channel filter=0.000000e+000 result=40 10:59:05 Config A/D Result=40 10:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:05 Get A/D filter: -9.255963e+061 result=40 10:59:05 Get A/D value=-858993460 result=40 10:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:05 Aux= 10:59:05 Message to Camera, serial 114313 queued 10:59:42 Received message from Master: op=PointingHead serial=114326 10:59:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:59:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:59:42 Point started: ret=0 10:59:42 point_skyscan result=0 10:59:43 Check angles 10:59:43 SkyScan query 10:59:44 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.69<-13446 Statuses=0009 0009 10:59:44 Msec=0 True Az=152.91 Ze=-21.69 Az status=0009 Ze status=0009 10:59:44 Check angles 10:59:44 SkyScan query 10:59:44 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.705<-12047 Statuses=0009 0009 10:59:44 Msec=750 True Az=135.405 Ze=-0.705 Az status=0009 Ze status=0009 10:59:44 Check angles 10:59:44 SkyScan query 10:59:45 SkyScan query done: ret=0 az=117.795<-7853 ze=20.235<-10651 Statuses=0009 0009 10:59:45 Msec=1500 True Az=117.795 Ze=20.235 Az status=0009 Ze status=0009 10:59:45 Check angles 10:59:45 SkyScan query 10:59:46 SkyScan query done: ret=0 az=100.17<-6678 ze=41.64<-9224 Statuses=0009 0009 10:59:46 Msec=2250 True Az=100.17 Ze=41.64 Az status=0009 Ze status=0009 10:59:46 Check angles 10:59:46 SkyScan query 10:59:47 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:59:47 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:59:47 Check angles 10:59:47 SkyScan query 10:59:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:59:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:59:47 Message to Master queued w/err=0: serial=114326 error=0 10:59:52 Received message from Master: op=Filter serial=114327 10:59:52 Color wheel filter change from 0 to 0 10:59:52 FLIGetFilterPos err=0 currentPosition=0 10:59:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:52 Filter is already there-color wheel unchanged 10:59:52 Received message from Master: op=Shutter serial=114328 10:59:52 Shutter LASER close 10:59:53 Received message from Camera: op=State serial=114330 10:59:53 GetSingleValue result=40 Value=cccccccc 10:59:53 SkyScan query 10:59:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:59:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:53 Parameters OK 10:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:53 Set A/D data flow result=40 10:59:53 Set A/D channel type result=40 10:59:53 Set A/D encoding result=40 10:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:53 Set channel filter=0.000000e+000 result=40 10:59:53 Config A/D Result=40 10:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:53 Get A/D filter: -9.255963e+061 result=40 10:59:53 Get A/D value=-858993460 result=40 10:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:53 Parameters OK 10:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:53 Set A/D data flow result=40 10:59:53 Set A/D channel type result=40 10:59:53 Set A/D encoding result=40 10:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:53 Set channel filter=0.000000e+000 result=40 10:59:53 Config A/D Result=40 10:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:53 Get A/D filter: -9.255963e+061 result=40 10:59:53 Get A/D value=-858993460 result=40 10:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:53 Aux= 10:59:53 Message to Camera, serial 114330 queued 11:00:30 Received message from Master: op=PointingHead serial=114343 11:00:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:00:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:00:30 Point started: ret=0 11:00:30 point_skyscan result=0 11:00:31 Check angles 11:00:31 SkyScan query 11:00:32 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 11:00:32 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 11:00:32 Check angles 11:00:32 SkyScan query 11:00:32 SkyScan query done: ret=0 az=127.02<-8468 ze=38.49<-9434 Statuses=0009 0008 11:00:32 Msec=750 True Az=127.02 Ze=38.49 Az status=0009 Ze status=0008 11:00:33 Check angles 11:00:33 SkyScan query 11:00:33 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 11:00:33 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 11:00:33 Check angles 11:00:33 SkyScan query 11:00:34 SkyScan query done: ret=0 az=162.045<-10803 ze=38.505<-9433 Statuses=0009 0008 11:00:34 Msec=2250 True Az=162.045 Ze=38.505 Az status=0009 Ze status=0008 11:00:34 Check angles 11:00:34 SkyScan query 11:00:35 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:00:35 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:00:35 Check angles 11:00:35 SkyScan query 11:00:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:00:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:00:35 Message to Master queued w/err=0: serial=114343 error=0 11:00:40 Received message from Master: op=Filter serial=114344 11:00:40 Color wheel filter change from 0 to 0 11:00:40 FLIGetFilterPos err=0 currentPosition=0 11:00:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:40 Filter is already there-color wheel unchanged 11:00:41 Received message from Master: op=Shutter serial=114345 11:00:41 Shutter LASER close 11:00:41 Received message from Camera: op=State serial=114347 11:00:41 GetSingleValue result=40 Value=cccccccc 11:00:41 SkyScan query 11:00:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:00:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:41 Parameters OK 11:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:41 Set A/D data flow result=40 11:00:41 Set A/D channel type result=40 11:00:41 Set A/D encoding result=40 11:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:41 Set channel filter=0.000000e+000 result=40 11:00:41 Config A/D Result=40 11:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:41 Get A/D filter: -9.255963e+061 result=40 11:00:41 Get A/D value=-858993460 result=40 11:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:41 Parameters OK 11:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:41 Set A/D data flow result=40 11:00:41 Set A/D channel type result=40 11:00:41 Set A/D encoding result=40 11:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:41 Set channel filter=0.000000e+000 result=40 11:00:41 Config A/D Result=40 11:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:41 Get A/D filter: -9.255963e+061 result=40 11:00:41 Get A/D value=-858993460 result=40 11:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:41 Aux= 11:00:41 Message to Camera, serial 114347 queued 11:01:18 Received message from Master: op=PointingHead serial=114360 11:01:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:01:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:01:18 Point started: ret=0 11:01:18 point_skyscan result=0 11:01:19 Check angles 11:01:19 SkyScan query 11:01:20 SkyScan query done: ret=0 az=153.195<-10213 ze=8.97<-11402 Statuses=0009 0009 11:01:20 Msec=0 True Az=153.195 Ze=8.97 Az status=0009 Ze status=0009 11:01:20 Check angles 11:01:20 SkyScan query 11:01:20 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.405<-12827 Statuses=0009 0009 11:01:20 Msec=750 True Az=135.3 Ze=-12.405 Az status=0009 Ze status=0009 11:01:21 Check angles 11:01:21 SkyScan query 11:01:21 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.345<-14223 Statuses=0009 0009 11:01:21 Msec=1500 True Az=117.78 Ze=-33.345 Az status=0009 Ze status=0009 11:01:21 Check angles 11:01:21 SkyScan query 11:01:22 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.54<-15436 Statuses=0009 0009 11:01:22 Msec=2250 True Az=100.395 Ze=-51.54 Az status=0009 Ze status=0009 11:01:22 Check angles 11:01:22 SkyScan query 11:01:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 11:01:23 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 11:01:23 Check angles 11:01:23 SkyScan query 11:01:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:01:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:01:23 Message to Master queued w/err=0: serial=114360 error=0 11:01:28 Received message from Master: op=Filter serial=114361 11:01:28 Color wheel filter change from 0 to 0 11:01:28 FLIGetFilterPos err=0 currentPosition=0 11:01:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:28 Filter is already there-color wheel unchanged 11:01:29 Received message from Master: op=Shutter serial=114362 11:01:29 Shutter LASER close 11:01:29 Received message from Camera: op=State serial=114364 11:01:29 GetSingleValue result=40 Value=cccccccc 11:01:29 SkyScan query 11:01:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:01:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:29 Parameters OK 11:01:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:29 Set A/D data flow result=40 11:01:29 Set A/D channel type result=40 11:01:29 Set A/D encoding result=40 11:01:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:29 Set channel filter=0.000000e+000 result=40 11:01:29 Config A/D Result=40 11:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:29 Get A/D filter: -9.255963e+061 result=40 11:01:29 Get A/D value=-858993460 result=40 11:01:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:29 Parameters OK 11:01:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:29 Set A/D data flow result=40 11:01:29 Set A/D channel type result=40 11:01:29 Set A/D encoding result=40 11:01:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:29 Set channel filter=0.000000e+000 result=40 11:01:29 Config A/D Result=40 11:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:29 Get A/D filter: -9.255963e+061 result=40 11:01:29 Get A/D value=-858993460 result=40 11:01:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:29 Aux= 11:01:29 Message to Camera, serial 114364 queued 11:02:06 Received message from Master: op=PointingHead serial=114377 11:02:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:02:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:02:06 Point started: ret=0 11:02:06 point_skyscan result=0 11:02:07 Check angles 11:02:07 SkyScan query 11:02:08 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.06<-17404 Statuses=0009 0009 11:02:08 Msec=0 True Az=108.81 Ze=-81.06 Az status=0009 Ze status=0009 11:02:08 Check angles 11:02:08 SkyScan query 11:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 11:02:08 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 11:02:09 Check angles 11:02:09 SkyScan query 11:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 11:02:09 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 11:02:09 Check angles 11:02:09 SkyScan query 11:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.94<-21596 Statuses=0008 0009 11:02:10 Msec=2250 True Az=112.995 Ze=-143.94 Az status=0008 Ze status=0009 11:02:10 Check angles 11:02:10 SkyScan query 11:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 11:02:11 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 11:02:11 Check angles 11:02:11 SkyScan query 11:02:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:02:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:02:12 Message to Master queued w/err=0: serial=114377 error=0 11:02:17 Received message from Master: op=Filter serial=114378 11:02:17 Color wheel filter change from 0 to 0 11:02:17 FLIGetFilterPos err=0 currentPosition=0 11:02:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:17 Filter is already there-color wheel unchanged 11:02:17 Received message from Master: op=Shutter serial=114379 11:02:17 Shutter LASER open 11:02:17 Received message from Camera: op=State serial=114381 11:02:17 GetSingleValue result=40 Value=cccccccc 11:02:17 SkyScan query 11:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:02:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:17 Parameters OK 11:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:17 Set A/D data flow result=40 11:02:17 Set A/D channel type result=40 11:02:17 Set A/D encoding result=40 11:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:17 Set channel filter=0.000000e+000 result=40 11:02:17 Config A/D Result=40 11:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:17 Get A/D filter: -9.255963e+061 result=40 11:02:17 Get A/D value=-858993460 result=40 11:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:17 Parameters OK 11:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:17 Set A/D data flow result=40 11:02:17 Set A/D channel type result=40 11:02:17 Set A/D encoding result=40 11:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:17 Set channel filter=0.000000e+000 result=40 11:02:17 Config A/D Result=40 11:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:17 Get A/D filter: -9.255963e+061 result=40 11:02:17 Get A/D value=-858993460 result=40 11:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:17 Aux= 11:02:17 Message to Camera, serial 114381 queued 11:02:26 Received message from Master: op=Shutter serial=114391 11:02:26 Shutter LASER close 11:02:26 Received message from Master: op=PointingHead serial=114395 11:02:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:02:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:02:27 Point started: ret=0 11:02:27 point_skyscan result=0 11:02:27 Check angles 11:02:27 SkyScan query 11:02:28 SkyScan query done: ret=0 az=89.85<-5990 ze=157.215<-1519 Statuses=0009 0009 11:02:28 Msec=0 True Az=89.85 Ze=157.215 Az status=0009 Ze status=0009 11:02:28 Check angles 11:02:28 SkyScan query 11:02:29 SkyScan query done: ret=0 az=72.285<-4819 ze=136.245<-2917 Statuses=0009 0009 11:02:29 Msec=750 True Az=72.285 Ze=136.245 Az status=0009 Ze status=0009 11:02:29 Check angles 11:02:29 SkyScan query 11:02:29 SkyScan query done: ret=0 az=54.93<-3662 ze=115.32<-4312 Statuses=0009 0009 11:02:29 Msec=1500 True Az=54.93 Ze=115.32 Az status=0009 Ze status=0009 11:02:30 Check angles 11:02:30 SkyScan query 11:02:30 SkyScan query done: ret=0 az=40.935<-2729 ze=94.335<-5711 Statuses=0009 0009 11:02:30 Msec=2250 True Az=40.935 Ze=94.335 Az status=0009 Ze status=0009 11:02:30 Check angles 11:02:30 SkyScan query 11:02:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.41<-7106 Statuses=0008 0009 11:02:31 Msec=3000 True Az=40.995 Ze=73.41 Az status=0008 Ze status=0009 11:02:31 Check angles 11:02:31 SkyScan query 11:02:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 11:02:32 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 11:02:32 Check angles 11:02:32 SkyScan query 11:02:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:02:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:02:32 Message to Master queued w/err=0: serial=114395 error=0 11:02:37 Received message from Master: op=Filter serial=114396 11:02:37 Color wheel filter change from 0 to 0 11:02:37 FLIGetFilterPos err=0 currentPosition=0 11:02:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:37 Filter is already there-color wheel unchanged 11:02:38 Received message from Master: op=Shutter serial=114397 11:02:38 Shutter LASER close 11:02:38 Received message from Camera: op=State serial=114399 11:02:38 GetSingleValue result=40 Value=cccccccc 11:02:38 SkyScan query 11:02:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:02:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:38 Parameters OK 11:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:38 Set A/D data flow result=40 11:02:38 Set A/D channel type result=40 11:02:38 Set A/D encoding result=40 11:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:38 Set channel filter=0.000000e+000 result=40 11:02:38 Config A/D Result=40 11:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:38 Get A/D filter: -9.255963e+061 result=40 11:02:38 Get A/D value=-858993460 result=40 11:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:38 Parameters OK 11:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:38 Set A/D data flow result=40 11:02:38 Set A/D channel type result=40 11:02:38 Set A/D encoding result=40 11:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:38 Set channel filter=0.000000e+000 result=40 11:02:38 Config A/D Result=40 11:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:38 Get A/D filter: -9.255963e+061 result=40 11:02:38 Get A/D value=-858993460 result=40 11:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:38 Aux= 11:02:38 Message to Camera, serial 114399 queued 11:03:15 Received message from Master: op=PointingHead serial=114412 11:03:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:03:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:03:16 Point started: ret=0 11:03:16 point_skyscan result=0 11:03:16 Check angles 11:03:16 SkyScan query 11:03:17 SkyScan query done: ret=0 az=63.885<-4259 ze=66.555<-7563 Statuses=0009 0008 11:03:17 Msec=0 True Az=63.885 Ze=66.555 Az status=0009 Ze status=0008 11:03:17 Check angles 11:03:17 SkyScan query 11:03:18 SkyScan query done: ret=0 az=81.225<-5415 ze=66.51<-7566 Statuses=0009 0008 11:03:18 Msec=750 True Az=81.225 Ze=66.51 Az status=0009 Ze status=0008 11:03:18 Check angles 11:03:18 SkyScan query 11:03:18 SkyScan query done: ret=0 az=98.565<-6571 ze=66.495<-7567 Statuses=0009 0008 11:03:18 Msec=1500 True Az=98.565 Ze=66.495 Az status=0009 Ze status=0008 11:03:19 Check angles 11:03:19 SkyScan query 11:03:19 SkyScan query done: ret=0 az=116.055<-7737 ze=66.495<-7567 Statuses=0009 0008 11:03:19 Msec=2250 True Az=116.055 Ze=66.495 Az status=0009 Ze status=0008 11:03:19 Check angles 11:03:19 SkyScan query 11:03:20 SkyScan query done: ret=0 az=133.68<-8912 ze=66.495<-7567 Statuses=0009 0008 11:03:20 Msec=3000 True Az=133.68 Ze=66.495 Az status=0009 Ze status=0008 11:03:20 Check angles 11:03:20 SkyScan query 11:03:21 SkyScan query done: ret=0 az=151.185<-10079 ze=66.495<-7567 Statuses=0009 0008 11:03:21 Msec=3750 True Az=151.185 Ze=66.495 Az status=0009 Ze status=0008 11:03:21 Check angles 11:03:21 SkyScan query 11:03:21 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:03:21 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:03:21 Message to Master queued w/err=0: serial=114412 error=0 11:03:26 Received message from Master: op=Filter serial=114413 11:03:26 Color wheel filter change from 0 to 0 11:03:26 FLIGetFilterPos err=0 currentPosition=0 11:03:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:26 Filter is already there-color wheel unchanged 11:03:27 Received message from Master: op=Shutter serial=114414 11:03:27 Shutter LASER close 11:03:27 Received message from Camera: op=State serial=114416 11:03:27 GetSingleValue result=40 Value=cccccccc 11:03:27 SkyScan query 11:03:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:03:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:27 Parameters OK 11:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:27 Set A/D data flow result=40 11:03:27 Set A/D channel type result=40 11:03:27 Set A/D encoding result=40 11:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:27 Set channel filter=0.000000e+000 result=40 11:03:27 Config A/D Result=40 11:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:27 Get A/D filter: -9.255963e+061 result=40 11:03:27 Get A/D value=-858993460 result=40 11:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:27 Parameters OK 11:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:27 Set A/D data flow result=40 11:03:27 Set A/D channel type result=40 11:03:27 Set A/D encoding result=40 11:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:27 Set channel filter=0.000000e+000 result=40 11:03:27 Config A/D Result=40 11:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:27 Get A/D filter: -9.255963e+061 result=40 11:03:27 Get A/D value=-858993460 result=40 11:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:27 Aux= 11:03:27 Message to Camera, serial 114416 queued 11:04:04 Received message from Master: op=PointingHead serial=114429 11:04:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:04:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:04:04 Point started: ret=0 11:04:04 point_skyscan result=0 11:04:05 Check angles 11:04:05 SkyScan query 11:04:06 SkyScan query done: ret=0 az=134.58<-8972 ze=36.24<-9584 Statuses=0009 0009 11:04:06 Msec=0 True Az=134.58 Ze=36.24 Az status=0009 Ze status=0009 11:04:06 Check angles 11:04:06 SkyScan query 11:04:07 SkyScan query done: ret=0 az=117.075<-7805 ze=15.33<-10978 Statuses=0009 0009 11:04:07 Msec=750 True Az=117.075 Ze=15.33 Az status=0009 Ze status=0009 11:04:07 Check angles 11:04:07 SkyScan query 11:04:07 SkyScan query done: ret=0 az=99.3<-6620 ze=-6.12<-12408 Statuses=0009 0009 11:04:07 Msec=1500 True Az=99.3 Ze=-6.12 Az status=0009 Ze status=0009 11:04:07 Check angles 11:04:07 SkyScan query 11:04:08 SkyScan query done: ret=0 az=81.885<-5459 ze=-27.075<-13805 Statuses=0009 0009 11:04:08 Msec=2250 True Az=81.885 Ze=-27.075 Az status=0009 Ze status=0009 11:04:08 Check angles 11:04:08 SkyScan query 11:04:09 SkyScan query done: ret=0 az=64.395<-4293 ze=-38.58<-14572 Statuses=0009 0008 11:04:09 Msec=3000 True Az=64.395 Ze=-38.58 Az status=0009 Ze status=0008 11:04:09 Check angles 11:04:09 SkyScan query 11:04:10 SkyScan query done: ret=0 az=46.95<-3130 ze=-38.52<-14568 Statuses=0009 0008 11:04:10 Msec=3750 True Az=46.95 Ze=-38.52 Az status=0009 Ze status=0008 11:04:10 Check angles 11:04:10 SkyScan query 11:04:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:04:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:04:10 Message to Master queued w/err=0: serial=114429 error=0 11:04:15 Received message from Master: op=Filter serial=114430 11:04:15 Color wheel filter change from 0 to 0 11:04:15 FLIGetFilterPos err=0 currentPosition=0 11:04:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:15 Filter is already there-color wheel unchanged 11:04:15 Received message from Master: op=Shutter serial=114431 11:04:15 Shutter LASER close 11:04:16 Received message from Camera: op=State serial=114433 11:04:16 GetSingleValue result=40 Value=cccccccc 11:04:16 SkyScan query 11:04:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:04:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:16 Parameters OK 11:04:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:16 Set A/D data flow result=40 11:04:16 Set A/D channel type result=40 11:04:16 Set A/D encoding result=40 11:04:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:16 Set channel filter=0.000000e+000 result=40 11:04:16 Config A/D Result=40 11:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:16 Get A/D filter: -9.255963e+061 result=40 11:04:16 Get A/D value=-858993460 result=40 11:04:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:16 Parameters OK 11:04:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:16 Set A/D data flow result=40 11:04:16 Set A/D channel type result=40 11:04:16 Set A/D encoding result=40 11:04:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:16 Set channel filter=0.000000e+000 result=40 11:04:16 Config A/D Result=40 11:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:16 Get A/D filter: -9.255963e+061 result=40 11:04:16 Get A/D value=-858993460 result=40 11:04:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:16 Aux= 11:04:16 Message to Camera, serial 114433 queued 11:04:53 Received message from Master: op=PointingHead serial=114446 11:04:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:04:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:04:53 Point started: ret=0 11:04:53 point_skyscan result=0 11:04:54 Check angles 11:04:54 SkyScan query 11:04:55 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.205<-16547 Statuses=0009 0009 11:04:55 Msec=0 True Az=63.99 Ze=-68.205 Az status=0009 Ze status=0009 11:04:55 Check angles 11:04:55 SkyScan query 11:04:55 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.205<-17947 Statuses=0009 0009 11:04:55 Msec=750 True Az=81.585 Ze=-89.205 Az status=0009 Ze status=0009 11:04:56 Check angles 11:04:56 SkyScan query 11:04:56 SkyScan query done: ret=0 az=99.015<-6601 ze=-110.13<-19342 Statuses=0009 0009 11:04:56 Msec=1500 True Az=99.015 Ze=-110.13 Az status=0009 Ze status=0009 11:04:56 Check angles 11:04:56 SkyScan query 11:04:57 SkyScan query done: ret=0 az=116.4<-7760 ze=-131.085<-20739 Statuses=0009 0009 11:04:57 Msec=2250 True Az=116.4 Ze=-131.085 Az status=0009 Ze status=0009 11:04:57 Check angles 11:04:57 SkyScan query 11:04:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 11:04:58 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 11:04:58 Check angles 11:04:58 SkyScan query 11:04:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:04:58 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:04:58 Message to Master queued w/err=0: serial=114446 error=0 11:05:03 Received message from Master: op=Filter serial=114447 11:05:03 Color wheel filter change from 0 to 0 11:05:03 FLIGetFilterPos err=0 currentPosition=0 11:05:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:03 Filter is already there-color wheel unchanged 11:05:04 Received message from Master: op=Shutter serial=114448 11:05:04 Shutter LASER close 11:05:04 Received message from Camera: op=State serial=114450 11:05:04 GetSingleValue result=40 Value=cccccccc 11:05:04 SkyScan query 11:05:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:05:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:04 Parameters OK 11:05:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:04 Set A/D data flow result=40 11:05:04 Set A/D channel type result=40 11:05:04 Set A/D encoding result=40 11:05:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:04 Set channel filter=0.000000e+000 result=40 11:05:04 Config A/D Result=40 11:05:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:04 Get A/D filter: -9.255963e+061 result=40 11:05:04 Get A/D value=-858993460 result=40 11:05:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:04 Parameters OK 11:05:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:04 Set A/D data flow result=40 11:05:04 Set A/D channel type result=40 11:05:04 Set A/D encoding result=40 11:05:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:04 Set channel filter=0.000000e+000 result=40 11:05:04 Config A/D Result=40 11:05:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:04 Get A/D filter: -9.255963e+061 result=40 11:05:04 Get A/D value=-858993460 result=40 11:05:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:04 Aux= 11:05:04 Message to Camera, serial 114450 queued 11:05:41 Received message from Master: op=PointingHead serial=114463 11:05:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:05:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:05:41 Point started: ret=0 11:05:41 point_skyscan result=0 11:05:42 Check angles 11:05:42 SkyScan query 11:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 11:05:43 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 11:05:43 Check angles 11:05:43 SkyScan query 11:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:05:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:05:43 Message to Master queued w/err=0: serial=114463 error=0 11:05:48 Received message from Master: op=Filter serial=114464 11:05:48 Color wheel filter change from 0 to 0 11:05:48 FLIGetFilterPos err=0 currentPosition=0 11:05:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:48 Filter is already there-color wheel unchanged 11:05:49 Received message from Master: op=Shutter serial=114465 11:05:49 Shutter LASER open 11:05:49 Received message from Camera: op=State serial=114467 11:05:49 GetSingleValue result=40 Value=cccccccc 11:05:49 SkyScan query 11:05:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:05:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:49 Parameters OK 11:05:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:49 Set A/D data flow result=40 11:05:49 Set A/D channel type result=40 11:05:49 Set A/D encoding result=40 11:05:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:49 Set channel filter=0.000000e+000 result=40 11:05:49 Config A/D Result=40 11:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:49 Get A/D filter: -9.255963e+061 result=40 11:05:49 Get A/D value=-858993460 result=40 11:05:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:49 Parameters OK 11:05:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:49 Set A/D data flow result=40 11:05:49 Set A/D channel type result=40 11:05:49 Set A/D encoding result=40 11:05:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:49 Set channel filter=0.000000e+000 result=40 11:05:49 Config A/D Result=40 11:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:49 Get A/D filter: -9.255963e+061 result=40 11:05:49 Get A/D value=-858993460 result=40 11:05:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:49 Aux= 11:05:49 Message to Camera, serial 114467 queued 11:05:58 Received message from Master: op=Shutter serial=114477 11:05:58 Shutter LASER close 11:05:58 Received message from Master: op=PointingHead serial=114481 11:05:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:05:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:05:59 Point started: ret=0 11:05:59 point_skyscan result=0 11:06:00 Check angles 11:06:00 SkyScan query 11:06:00 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.95<-21530 Statuses=0009 0009 11:06:00 Msec=0 True Az=136.185 Ze=-142.95 Az status=0009 Ze status=0009 11:06:00 Check angles 11:06:00 SkyScan query [UTC 2018-12-13 11:06:01] 11:06:01 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.01<-20134 Statuses=0009 0009 11:06:01 Msec=750 True Az=153.63 Ze=-122.01 Az status=0009 Ze status=0009 11:06:01 Check angles 11:06:01 SkyScan query 11:06:02 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.56<-18704 Statuses=0009 0009 11:06:02 Msec=1500 True Az=171.51 Ze=-100.56 Az status=0009 Ze status=0009 11:06:02 Check angles 11:06:02 SkyScan query 11:06:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.68<-17312 Statuses=0008 0009 11:06:02 Msec=2250 True Az=176.01 Ze=-79.68 Az status=0008 Ze status=0009 11:06:03 Check angles 11:06:03 SkyScan query 11:06:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 11:06:03 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 11:06:03 Check angles 11:06:03 SkyScan query 11:06:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 11:06:04 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 11:06:04 Message to Master queued w/err=0: serial=114481 error=0 11:06:09 Received message from Master: op=Filter serial=114482 11:06:09 Color wheel filter change from 0 to 0 11:06:09 FLIGetFilterPos err=0 currentPosition=0 11:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:09 Filter is already there-color wheel unchanged 11:06:09 Received message from Master: op=Shutter serial=114483 11:06:09 Shutter LASER close 11:06:09 Received message from Camera: op=State serial=114485 11:06:09 GetSingleValue result=40 Value=cccccccc 11:06:09 SkyScan query 11:06:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:10 Parameters OK 11:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:10 Set A/D data flow result=40 11:06:10 Set A/D channel type result=40 11:06:10 Set A/D encoding result=40 11:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:10 Set channel filter=0.000000e+000 result=40 11:06:10 Config A/D Result=40 11:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:10 Get A/D filter: -9.255963e+061 result=40 11:06:10 Get A/D value=-858993460 result=40 11:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:10 Parameters OK 11:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:10 Set A/D data flow result=40 11:06:10 Set A/D channel type result=40 11:06:10 Set A/D encoding result=40 11:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:10 Set channel filter=0.000000e+000 result=40 11:06:10 Config A/D Result=40 11:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:10 Get A/D filter: -9.255963e+061 result=40 11:06:10 Get A/D value=-858993460 result=40 11:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:10 Aux= 11:06:10 Message to Camera, serial 114485 queued 11:06:47 Received message from Master: op=PointingHead serial=114498 11:06:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:06:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:06:47 Point started: ret=0 11:06:47 point_skyscan result=0 11:06:48 Check angles 11:06:48 SkyScan query 11:06:48 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.645<-13443 Statuses=0009 0009 11:06:48 Msec=0 True Az=152.91 Ze=-21.645 Az status=0009 Ze status=0009 11:06:49 Check angles 11:06:49 SkyScan query 11:06:49 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.645<-12043 Statuses=0009 0009 11:06:49 Msec=750 True Az=135.435 Ze=-0.645 Az status=0009 Ze status=0009 11:06:49 Check angles 11:06:49 SkyScan query 11:06:50 SkyScan query done: ret=0 az=117.795<-7853 ze=20.28<-10648 Statuses=0009 0009 11:06:50 Msec=1500 True Az=117.795 Ze=20.28 Az status=0009 Ze status=0009 11:06:50 Check angles 11:06:50 SkyScan query 11:06:51 SkyScan query done: ret=0 az=100.41<-6694 ze=41.265<-9249 Statuses=0009 0009 11:06:51 Msec=2250 True Az=100.41 Ze=41.265 Az status=0009 Ze status=0009 11:06:51 Check angles 11:06:51 SkyScan query 11:06:51 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 11:06:51 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 11:06:52 Check angles 11:06:52 SkyScan query 11:06:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:06:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:06:52 Message to Master queued w/err=0: serial=114498 error=0 11:06:57 Received message from Master: op=Filter serial=114499 11:06:57 Color wheel filter change from 0 to 0 11:06:57 FLIGetFilterPos err=0 currentPosition=0 11:06:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:57 Filter is already there-color wheel unchanged 11:06:57 Received message from Master: op=Shutter serial=114500 11:06:57 Shutter LASER close 11:06:57 Received message from Camera: op=State serial=114502 11:06:57 GetSingleValue result=40 Value=cccccccc 11:06:57 SkyScan query 11:06:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:06:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:58 Parameters OK 11:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:58 Set A/D data flow result=40 11:06:58 Set A/D channel type result=40 11:06:58 Set A/D encoding result=40 11:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:58 Set channel filter=0.000000e+000 result=40 11:06:58 Config A/D Result=40 11:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:58 Get A/D filter: -9.255963e+061 result=40 11:06:58 Get A/D value=-858993460 result=40 11:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:58 Parameters OK 11:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:58 Set A/D data flow result=40 11:06:58 Set A/D channel type result=40 11:06:58 Set A/D encoding result=40 11:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:58 Set channel filter=0.000000e+000 result=40 11:06:58 Config A/D Result=40 11:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:58 Get A/D filter: -9.255963e+061 result=40 11:06:58 Get A/D value=-858993460 result=40 11:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:58 Aux= 11:06:58 Message to Camera, serial 114502 queued 11:07:34 Received message from Master: op=PointingHead serial=114514 11:07:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:07:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:07:34 Point started: ret=0 11:07:34 point_skyscan result=0 11:07:35 Check angles 11:07:35 SkyScan query 11:07:35 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 11:07:35 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 11:07:36 Check angles 11:07:36 SkyScan query 11:07:36 SkyScan query done: ret=0 az=126.42<-8428 ze=38.49<-9434 Statuses=0009 0008 11:07:36 Msec=750 True Az=126.42 Ze=38.49 Az status=0009 Ze status=0008 11:07:36 Check angles 11:07:36 SkyScan query 11:07:37 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 11:07:37 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 11:07:37 Check angles 11:07:37 SkyScan query 11:07:38 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 11:07:38 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 11:07:38 Check angles 11:07:38 SkyScan query 11:07:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:07:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:07:39 Check angles 11:07:39 SkyScan query 11:07:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:07:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:07:39 Message to Master queued w/err=0: serial=114514 error=0 11:07:44 Received message from Master: op=Filter serial=114515 11:07:44 Color wheel filter change from 0 to 0 11:07:44 FLIGetFilterPos err=0 currentPosition=0 11:07:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:44 Filter is already there-color wheel unchanged 11:07:44 Received message from Master: op=Shutter serial=114516 11:07:44 Shutter LASER close 11:07:44 Received message from Camera: op=State serial=114518 11:07:44 GetSingleValue result=40 Value=cccccccc 11:07:44 SkyScan query 11:07:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:07:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:45 Parameters OK 11:07:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:45 Set A/D data flow result=40 11:07:45 Set A/D channel type result=40 11:07:45 Set A/D encoding result=40 11:07:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:45 Set channel filter=0.000000e+000 result=40 11:07:45 Config A/D Result=40 11:07:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:45 Get A/D filter: -9.255963e+061 result=40 11:07:45 Get A/D value=-858993460 result=40 11:07:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:45 Parameters OK 11:07:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:45 Set A/D data flow result=40 11:07:45 Set A/D channel type result=40 11:07:45 Set A/D encoding result=40 11:07:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:45 Set channel filter=0.000000e+000 result=40 11:07:45 Config A/D Result=40 11:07:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:45 Get A/D filter: -9.255963e+061 result=40 11:07:45 Get A/D value=-858993460 result=40 11:07:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:45 Aux= 11:07:45 Message to Camera, serial 114518 queued 11:08:22 Received message from Master: op=PointingHead serial=114531 11:08:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:08:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:08:22 Point started: ret=0 11:08:22 point_skyscan result=0 11:08:23 Check angles 11:08:23 SkyScan query 11:08:24 SkyScan query done: ret=0 az=153.225<-10215 ze=8.925<-11405 Statuses=0009 0009 11:08:24 Msec=0 True Az=153.225 Ze=8.925 Az status=0009 Ze status=0009 11:08:24 Check angles 11:08:24 SkyScan query 11:08:24 SkyScan query done: ret=0 az=135.825<-9055 ze=-12.15<-12810 Statuses=0009 0009 11:08:24 Msec=750 True Az=135.825 Ze=-12.15 Az status=0009 Ze status=0009 11:08:25 Check angles 11:08:25 SkyScan query 11:08:25 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.405<-14227 Statuses=0009 0009 11:08:25 Msec=1500 True Az=117.81 Ze=-33.405 Az status=0009 Ze status=0009 11:08:25 Check angles 11:08:25 SkyScan query 11:08:26 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 11:08:26 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 11:08:26 Check angles 11:08:26 SkyScan query 11:08:27 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:08:27 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:08:27 Check angles 11:08:27 SkyScan query 11:08:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:08:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:08:27 Message to Master queued w/err=0: serial=114531 error=0 11:08:32 Received message from Master: op=Filter serial=114532 11:08:32 Color wheel filter change from 0 to 0 11:08:32 FLIGetFilterPos err=0 currentPosition=0 11:08:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:32 Filter is already there-color wheel unchanged 11:08:33 Received message from Master: op=Shutter serial=114533 11:08:33 Shutter LASER close 11:08:33 Received message from Camera: op=State serial=114535 11:08:33 GetSingleValue result=40 Value=cccccccc 11:08:33 SkyScan query 11:08:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:08:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:33 Parameters OK 11:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:33 Set A/D data flow result=40 11:08:33 Set A/D channel type result=40 11:08:33 Set A/D encoding result=40 11:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:33 Set channel filter=0.000000e+000 result=40 11:08:33 Config A/D Result=40 11:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:33 Get A/D filter: -9.255963e+061 result=40 11:08:33 Get A/D value=-858993460 result=40 11:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:33 Parameters OK 11:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:33 Set A/D data flow result=40 11:08:33 Set A/D channel type result=40 11:08:33 Set A/D encoding result=40 11:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:33 Set channel filter=0.000000e+000 result=40 11:08:33 Config A/D Result=40 11:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:33 Get A/D filter: -9.255963e+061 result=40 11:08:33 Get A/D value=-858993460 result=40 11:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:33 Aux= 11:08:33 Message to Camera, serial 114535 queued 11:09:10 Received message from Master: op=PointingHead serial=114548 11:09:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:09:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:09:10 Point started: ret=0 11:09:10 point_skyscan result=0 11:09:11 Check angles 11:09:11 SkyScan query 11:09:12 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.09<-17406 Statuses=0009 0009 11:09:12 Msec=0 True Az=108.99 Ze=-81.09 Az status=0009 Ze status=0009 11:09:12 Check angles 11:09:12 SkyScan query 11:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 11:09:12 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 11:09:13 Check angles 11:09:13 SkyScan query 11:09:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 11:09:13 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 11:09:13 Check angles 11:09:13 SkyScan query 11:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 11:09:14 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 11:09:14 Check angles 11:09:14 SkyScan query 11:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 11:09:15 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 11:09:15 Check angles 11:09:15 SkyScan query 11:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:09:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:09:15 Message to Master queued w/err=0: serial=114548 error=0 11:09:20 Received message from Master: op=Filter serial=114549 11:09:20 Color wheel filter change from 0 to 0 11:09:20 FLIGetFilterPos err=0 currentPosition=0 11:09:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:20 Filter is already there-color wheel unchanged 11:09:21 Received message from Master: op=Shutter serial=114550 11:09:21 Shutter LASER open 11:09:21 Received message from Camera: op=State serial=114552 11:09:21 GetSingleValue result=40 Value=cccccccc 11:09:21 SkyScan query 11:09:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:09:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:21 Parameters OK 11:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:21 Set A/D data flow result=40 11:09:21 Set A/D channel type result=40 11:09:21 Set A/D encoding result=40 11:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:21 Set channel filter=0.000000e+000 result=40 11:09:21 Config A/D Result=40 11:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:21 Get A/D filter: -9.255963e+061 result=40 11:09:21 Get A/D value=-858993460 result=40 11:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:21 Parameters OK 11:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:21 Set A/D data flow result=40 11:09:21 Set A/D channel type result=40 11:09:21 Set A/D encoding result=40 11:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:21 Set channel filter=0.000000e+000 result=40 11:09:21 Config A/D Result=40 11:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:21 Get A/D filter: -9.255963e+061 result=40 11:09:21 Get A/D value=-858993460 result=40 11:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:21 Aux= 11:09:21 Message to Camera, serial 114552 queued 11:09:30 Received message from Master: op=Shutter serial=114562 11:09:30 Shutter LASER close 11:09:30 Received message from Master: op=PointingHead serial=114566 11:09:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:09:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:09:31 Point started: ret=0 11:09:31 point_skyscan result=0 11:09:31 Check angles 11:09:31 SkyScan query 11:09:32 SkyScan query done: ret=0 az=90.015<-6001 ze=157.41<-1506 Statuses=0009 0009 11:09:32 Msec=0 True Az=90.015 Ze=157.41 Az status=0009 Ze status=0009 11:09:32 Check angles 11:09:32 SkyScan query 11:09:33 SkyScan query done: ret=0 az=72.06<-4804 ze=136.005<-2933 Statuses=0009 0009 11:09:33 Msec=750 True Az=72.06 Ze=136.005 Az status=0009 Ze status=0009 11:09:33 Check angles 11:09:33 SkyScan query 11:09:33 SkyScan query done: ret=0 az=54.765<-3651 ze=115.05<-4330 Statuses=0009 0009 11:09:33 Msec=1500 True Az=54.765 Ze=115.05 Az status=0009 Ze status=0009 11:09:34 Check angles 11:09:34 SkyScan query 11:09:34 SkyScan query done: ret=0 az=40.92<-2728 ze=94.065<-5729 Statuses=0009 0009 11:09:34 Msec=2250 True Az=40.92 Ze=94.065 Az status=0009 Ze status=0009 11:09:34 Check angles 11:09:34 SkyScan query 11:09:35 SkyScan query done: ret=0 az=40.995<-2733 ze=72.675<-7155 Statuses=0008 0009 11:09:35 Msec=3000 True Az=40.995 Ze=72.675 Az status=0008 Ze status=0009 11:09:35 Check angles 11:09:35 SkyScan query 11:09:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 11:09:36 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 11:09:36 Check angles 11:09:36 SkyScan query 11:09:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:09:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:09:36 Message to Master queued w/err=0: serial=114566 error=0 11:09:41 Received message from Master: op=Filter serial=114567 11:09:41 Color wheel filter change from 0 to 0 11:09:41 FLIGetFilterPos err=0 currentPosition=0 11:09:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:41 Filter is already there-color wheel unchanged 11:09:42 Received message from Master: op=Shutter serial=114568 11:09:42 Shutter LASER close 11:09:42 Received message from Camera: op=State serial=114570 11:09:42 GetSingleValue result=40 Value=cccccccc 11:09:42 SkyScan query 11:09:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:09:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:42 Parameters OK 11:09:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:42 Set A/D data flow result=40 11:09:42 Set A/D channel type result=40 11:09:42 Set A/D encoding result=40 11:09:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:42 Set channel filter=0.000000e+000 result=40 11:09:42 Config A/D Result=40 11:09:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:42 Get A/D filter: -9.255963e+061 result=40 11:09:42 Get A/D value=-858993460 result=40 11:09:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:42 Parameters OK 11:09:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:42 Set A/D data flow result=40 11:09:42 Set A/D channel type result=40 11:09:42 Set A/D encoding result=40 11:09:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:42 Set channel filter=0.000000e+000 result=40 11:09:42 Config A/D Result=40 11:09:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:42 Get A/D filter: -9.255963e+061 result=40 11:09:42 Get A/D value=-858993460 result=40 11:09:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:42 Aux= 11:09:42 Message to Camera, serial 114570 queued 11:10:19 Received message from Master: op=PointingHead serial=114583 11:10:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:10:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:10:20 Point started: ret=0 11:10:20 point_skyscan result=0 11:10:20 Check angles 11:10:20 SkyScan query 11:10:21 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 11:10:21 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 11:10:21 Check angles 11:10:21 SkyScan query 11:10:22 SkyScan query done: ret=0 az=81.66<-5444 ze=66.51<-7566 Statuses=0009 0008 11:10:22 Msec=750 True Az=81.66 Ze=66.51 Az status=0009 Ze status=0008 11:10:22 Check angles 11:10:22 SkyScan query 11:10:22 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 11:10:22 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 11:10:23 Check angles 11:10:23 SkyScan query 11:10:23 SkyScan query done: ret=0 az=117.045<-7803 ze=66.495<-7567 Statuses=0009 0008 11:10:23 Msec=2250 True Az=117.045 Ze=66.495 Az status=0009 Ze status=0008 11:10:23 Check angles 11:10:23 SkyScan query 11:10:24 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 11:10:24 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 11:10:24 Check angles 11:10:24 SkyScan query 11:10:25 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 11:10:25 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 11:10:25 Check angles 11:10:25 SkyScan query 11:10:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:10:25 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 11:10:25 Message to Master queued w/err=0: serial=114583 error=0 11:10:30 Received message from Master: op=Filter serial=114584 11:10:30 Color wheel filter change from 0 to 0 11:10:30 FLIGetFilterPos err=0 currentPosition=0 11:10:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:30 Filter is already there-color wheel unchanged 11:10:31 Received message from Master: op=Shutter serial=114585 11:10:31 Shutter LASER close 11:10:31 Received message from Camera: op=State serial=114587 11:10:31 GetSingleValue result=40 Value=cccccccc 11:10:31 SkyScan query 11:10:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:10:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:31 Parameters OK 11:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:31 Set A/D data flow result=40 11:10:31 Set A/D channel type result=40 11:10:31 Set A/D encoding result=40 11:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:31 Set channel filter=0.000000e+000 result=40 11:10:31 Config A/D Result=40 11:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:31 Get A/D filter: -9.255963e+061 result=40 11:10:31 Get A/D value=-858993460 result=40 11:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:31 Parameters OK 11:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:31 Set A/D data flow result=40 11:10:31 Set A/D channel type result=40 11:10:31 Set A/D encoding result=40 11:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:31 Set channel filter=0.000000e+000 result=40 11:10:31 Config A/D Result=40 11:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:31 Get A/D filter: -9.255963e+061 result=40 11:10:31 Get A/D value=-858993460 result=40 11:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:31 Aux= 11:10:31 Message to Camera, serial 114587 queued 11:11:08 Received message from Master: op=PointingHead serial=114600 11:11:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:11:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:11:08 Point started: ret=0 11:11:08 point_skyscan result=0 11:11:09 Check angles 11:11:09 SkyScan query 11:11:10 SkyScan query done: ret=0 az=134.865<-8991 ze=36.63<-9558 Statuses=0009 0009 11:11:10 Msec=0 True Az=134.865 Ze=36.63 Az status=0009 Ze status=0009 11:11:10 Check angles 11:11:10 SkyScan query 11:11:11 SkyScan query done: ret=0 az=117.12<-7808 ze=15.27<-10982 Statuses=0009 0009 11:11:11 Msec=750 True Az=117.12 Ze=15.27 Az status=0009 Ze status=0009 11:11:11 Check angles 11:11:11 SkyScan query 11:11:11 SkyScan query done: ret=0 az=99.705<-6647 ze=-5.715<-12381 Statuses=0009 0009 11:11:11 Msec=1500 True Az=99.705 Ze=-5.715 Az status=0009 Ze status=0009 11:11:11 Check angles 11:11:11 SkyScan query 11:11:12 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.685<-13779 Statuses=0009 0009 11:11:12 Msec=2250 True Az=82.2 Ze=-26.685 Az status=0009 Ze status=0009 11:11:12 Check angles 11:11:12 SkyScan query 11:11:13 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.565<-14571 Statuses=0009 0008 11:11:13 Msec=3000 True Az=64.695 Ze=-38.565 Az status=0009 Ze status=0008 11:11:13 Check angles 11:11:13 SkyScan query 11:11:14 SkyScan query done: ret=0 az=47.25<-3150 ze=-38.535<-14569 Statuses=0009 0008 11:11:14 Msec=3750 True Az=47.25 Ze=-38.535 Az status=0009 Ze status=0008 11:11:14 Check angles 11:11:14 SkyScan query 11:11:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:11:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:11:14 Message to Master queued w/err=0: serial=114600 error=0 11:11:19 Received message from Master: op=Filter serial=114601 11:11:19 Color wheel filter change from 0 to 0 11:11:19 FLIGetFilterPos err=0 currentPosition=0 11:11:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:19 Filter is already there-color wheel unchanged 11:11:19 Received message from Master: op=Shutter serial=114602 11:11:19 Shutter LASER close 11:11:19 Received message from Camera: op=State serial=114604 11:11:19 GetSingleValue result=40 Value=cccccccc 11:11:19 SkyScan query 11:11:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:11:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:20 Parameters OK 11:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:20 Set A/D data flow result=40 11:11:20 Set A/D channel type result=40 11:11:20 Set A/D encoding result=40 11:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:20 Set channel filter=0.000000e+000 result=40 11:11:20 Config A/D Result=40 11:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:20 Get A/D filter: -9.255963e+061 result=40 11:11:20 Get A/D value=-858993460 result=40 11:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:20 Parameters OK 11:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:20 Set A/D data flow result=40 11:11:20 Set A/D channel type result=40 11:11:20 Set A/D encoding result=40 11:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:20 Set channel filter=0.000000e+000 result=40 11:11:20 Config A/D Result=40 11:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:20 Get A/D filter: -9.255963e+061 result=40 11:11:20 Get A/D value=-858993460 result=40 11:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:20 Aux= 11:11:20 Message to Camera, serial 114604 queued 11:11:57 Received message from Master: op=PointingHead serial=114617 11:11:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:11:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:11:57 Point started: ret=0 11:11:57 point_skyscan result=0 11:11:58 Check angles 11:11:58 SkyScan query 11:11:59 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.28<-16552 Statuses=0009 0009 11:11:59 Msec=0 True Az=63.96 Ze=-68.28 Az status=0009 Ze status=0009 11:11:59 Check angles 11:11:59 SkyScan query 11:11:59 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.265<-17951 Statuses=0009 0009 11:11:59 Msec=750 True Az=81.39 Ze=-89.265 Az status=0009 Ze status=0009 11:11:59 Check angles 11:11:59 SkyScan query 11:12:00 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.22<-19348 Statuses=0009 0009 11:12:00 Msec=1500 True Az=98.82 Ze=-110.22 Az status=0009 Ze status=0009 11:12:00 Check angles 11:12:00 SkyScan query 11:12:01 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.58<-20772 Statuses=0009 0009 11:12:01 Msec=2250 True Az=116.82 Ze=-131.58 Az status=0009 Ze status=0009 11:12:01 Check angles 11:12:01 SkyScan query 11:12:02 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 11:12:02 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 11:12:02 Check angles 11:12:02 SkyScan query 11:12:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:12:02 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:12:02 Message to Master queued w/err=0: serial=114617 error=0 11:12:07 Received message from Master: op=Filter serial=114618 11:12:07 Color wheel filter change from 0 to 0 11:12:07 FLIGetFilterPos err=0 currentPosition=0 11:12:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:07 Filter is already there-color wheel unchanged 11:12:07 Received message from Master: op=Shutter serial=114619 11:12:07 Shutter LASER close 11:12:08 Received message from Camera: op=State serial=114621 11:12:08 GetSingleValue result=40 Value=cccccccc 11:12:08 SkyScan query 11:12:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:12:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:08 Parameters OK 11:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:08 Set A/D data flow result=40 11:12:08 Set A/D channel type result=40 11:12:08 Set A/D encoding result=40 11:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:08 Set channel filter=0.000000e+000 result=40 11:12:08 Config A/D Result=40 11:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:08 Get A/D filter: -9.255963e+061 result=40 11:12:08 Get A/D value=-858993460 result=40 11:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:08 Parameters OK 11:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:08 Set A/D data flow result=40 11:12:08 Set A/D channel type result=40 11:12:08 Set A/D encoding result=40 11:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:08 Set channel filter=0.000000e+000 result=40 11:12:08 Config A/D Result=40 11:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:08 Get A/D filter: -9.255963e+061 result=40 11:12:08 Get A/D value=-858993460 result=40 11:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:08 Aux= 11:12:08 Message to Camera, serial 114621 queued 11:12:45 Received message from Master: op=PointingHead serial=114634 11:12:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:12:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:12:45 Point started: ret=0 11:12:45 point_skyscan result=0 11:12:46 Check angles 11:12:46 SkyScan query 11:12:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 11:12:47 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 11:12:47 Check angles 11:12:47 SkyScan query 11:12:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:12:47 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:12:47 Message to Master queued w/err=0: serial=114634 error=0 11:12:52 Received message from Master: op=Filter serial=114635 11:12:52 Color wheel filter change from 0 to 0 11:12:52 FLIGetFilterPos err=0 currentPosition=0 11:12:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:52 Filter is already there-color wheel unchanged 11:12:53 Received message from Master: op=Shutter serial=114636 11:12:53 Shutter LASER open 11:12:53 Received message from Camera: op=State serial=114638 11:12:53 GetSingleValue result=40 Value=cccccccc 11:12:53 SkyScan query 11:12:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:12:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:53 Parameters OK 11:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:53 Set A/D data flow result=40 11:12:53 Set A/D channel type result=40 11:12:53 Set A/D encoding result=40 11:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:53 Set channel filter=0.000000e+000 result=40 11:12:53 Config A/D Result=40 11:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:53 Get A/D filter: -9.255963e+061 result=40 11:12:53 Get A/D value=-858993460 result=40 11:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:53 Parameters OK 11:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:53 Set A/D data flow result=40 11:12:53 Set A/D channel type result=40 11:12:53 Set A/D encoding result=40 11:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:53 Set channel filter=0.000000e+000 result=40 11:12:53 Config A/D Result=40 11:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:53 Get A/D filter: -9.255963e+061 result=40 11:12:53 Get A/D value=-858993460 result=40 11:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:53 Aux= 11:12:53 Message to Camera, serial 114638 queued 11:13:02 Received message from Master: op=Shutter serial=114648 11:13:02 Shutter LASER close 11:13:02 Received message from Master: op=PointingHead serial=114652 11:13:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:13:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:13:03 Point started: ret=0 11:13:03 point_skyscan result=0 11:13:04 Check angles 11:13:04 SkyScan query 11:13:04 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.8<-21520 Statuses=0009 0009 11:13:04 Msec=0 True Az=136.38 Ze=-142.8 Az status=0009 Ze status=0009 11:13:04 Check angles 11:13:04 SkyScan query 11:13:05 SkyScan query done: ret=0 az=154.215<-10281 ze=-121.47<-20098 Statuses=0009 0009 11:13:05 Msec=750 True Az=154.215 Ze=-121.47 Az status=0009 Ze status=0009 11:13:05 Check angles 11:13:05 SkyScan query 11:13:06 SkyScan query done: ret=0 az=171.675<-11445 ze=-100.395<-18693 Statuses=0009 0009 11:13:06 Msec=1500 True Az=171.675 Ze=-100.395 Az status=0009 Ze status=0009 11:13:06 Check angles 11:13:06 SkyScan query 11:13:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.485<-17299 Statuses=0008 0009 11:13:06 Msec=2250 True Az=176.01 Ze=-79.485 Az status=0008 Ze status=0009 11:13:07 Check angles 11:13:07 SkyScan query 11:13:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.5<-15900 Statuses=0008 0009 11:13:07 Msec=3000 True Az=176.01 Ze=-58.5 Az status=0008 Ze status=0009 11:13:07 Check angles 11:13:07 SkyScan query 11:13:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 11:13:08 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 11:13:08 Message to Master queued w/err=0: serial=114652 error=0 11:13:13 Received message from Master: op=Filter serial=114653 11:13:13 Color wheel filter change from 0 to 0 11:13:13 FLIGetFilterPos err=0 currentPosition=0 11:13:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:13 Filter is already there-color wheel unchanged 11:13:13 Received message from Master: op=Shutter serial=114654 11:13:13 Shutter LASER close 11:13:13 Received message from Camera: op=State serial=114656 11:13:13 GetSingleValue result=40 Value=cccccccc 11:13:13 SkyScan query 11:13:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:13:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:14 Parameters OK 11:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:14 Set A/D data flow result=40 11:13:14 Set A/D channel type result=40 11:13:14 Set A/D encoding result=40 11:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:14 Set channel filter=0.000000e+000 result=40 11:13:14 Config A/D Result=40 11:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:14 Get A/D filter: -9.255963e+061 result=40 11:13:14 Get A/D value=-858993460 result=40 11:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:14 Parameters OK 11:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:14 Set A/D data flow result=40 11:13:14 Set A/D channel type result=40 11:13:14 Set A/D encoding result=40 11:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:14 Set channel filter=0.000000e+000 result=40 11:13:14 Config A/D Result=40 11:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:14 Get A/D filter: -9.255963e+061 result=40 11:13:14 Get A/D value=-858993460 result=40 11:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:14 Aux= 11:13:14 Message to Camera, serial 114656 queued 11:13:51 Received message from Master: op=PointingHead serial=114669 11:13:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:13:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:13:51 Point started: ret=0 11:13:51 point_skyscan result=0 11:13:52 Check angles 11:13:52 SkyScan query 11:13:52 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.78<-13452 Statuses=0009 0009 11:13:52 Msec=0 True Az=152.97 Ze=-21.78 Az status=0009 Ze status=0009 11:13:52 Check angles 11:13:52 SkyScan query 11:13:53 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.78<-12052 Statuses=0009 0009 11:13:53 Msec=750 True Az=135.585 Ze=-0.78 Az status=0009 Ze status=0009 11:13:53 Check angles 11:13:53 SkyScan query 11:13:54 SkyScan query done: ret=0 az=117.975<-7865 ze=20.145<-10657 Statuses=0009 0009 11:13:54 Msec=1500 True Az=117.975 Ze=20.145 Az status=0009 Ze status=0009 11:13:54 Check angles 11:13:54 SkyScan query 11:13:55 SkyScan query done: ret=0 az=100.605<-6707 ze=41.145<-9257 Statuses=0009 0009 11:13:55 Msec=2250 True Az=100.605 Ze=41.145 Az status=0009 Ze status=0009 11:13:55 Check angles 11:13:55 SkyScan query 11:13:55 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 11:13:55 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 11:13:55 Check angles 11:13:55 SkyScan query 11:13:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:13:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:13:56 Message to Master queued w/err=0: serial=114669 error=0 11:14:01 Received message from Master: op=Filter serial=114670 11:14:01 Color wheel filter change from 0 to 0 11:14:01 FLIGetFilterPos err=0 currentPosition=0 11:14:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:01 Filter is already there-color wheel unchanged 11:14:01 Received message from Master: op=Shutter serial=114671 11:14:01 Shutter LASER close 11:14:01 Received message from Camera: op=State serial=114673 11:14:01 GetSingleValue result=40 Value=cccccccc 11:14:01 SkyScan query 11:14:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:02 Parameters OK 11:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:02 Set A/D data flow result=40 11:14:02 Set A/D channel type result=40 11:14:02 Set A/D encoding result=40 11:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:02 Set channel filter=0.000000e+000 result=40 11:14:02 Config A/D Result=40 11:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:02 Get A/D filter: -9.255963e+061 result=40 11:14:02 Get A/D value=-858993460 result=40 11:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:02 Parameters OK 11:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:02 Set A/D data flow result=40 11:14:02 Set A/D channel type result=40 11:14:02 Set A/D encoding result=40 11:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:02 Set channel filter=0.000000e+000 result=40 11:14:02 Config A/D Result=40 11:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:02 Get A/D filter: -9.255963e+061 result=40 11:14:02 Get A/D value=-858993460 result=40 11:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:02 Aux= 11:14:02 Message to Camera, serial 114673 queued 11:14:39 Received message from Master: op=PointingHead serial=114686 11:14:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:14:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:14:39 Point started: ret=0 11:14:39 point_skyscan result=0 11:14:40 Check angles 11:14:40 SkyScan query 11:14:40 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 11:14:40 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 11:14:40 Check angles 11:14:40 SkyScan query 11:14:41 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 11:14:41 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 11:14:41 Check angles 11:14:41 SkyScan query 11:14:42 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 11:14:42 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 11:14:42 Check angles 11:14:42 SkyScan query 11:14:43 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 11:14:43 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 11:14:43 Check angles 11:14:43 SkyScan query 11:14:43 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:14:43 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:14:43 Check angles 11:14:43 SkyScan query 11:14:44 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:14:44 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:14:44 Message to Master queued w/err=0: serial=114686 error=0 11:14:49 Received message from Master: op=Filter serial=114687 11:14:49 Color wheel filter change from 0 to 0 11:14:49 FLIGetFilterPos err=0 currentPosition=0 11:14:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:49 Filter is already there-color wheel unchanged 11:14:49 Received message from Master: op=Shutter serial=114688 11:14:49 Shutter LASER close 11:14:49 Received message from Camera: op=State serial=114690 11:14:49 GetSingleValue result=40 Value=cccccccc 11:14:49 SkyScan query 11:14:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:14:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:50 Parameters OK 11:14:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:50 Set A/D data flow result=40 11:14:50 Set A/D channel type result=40 11:14:50 Set A/D encoding result=40 11:14:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:50 Set channel filter=0.000000e+000 result=40 11:14:50 Config A/D Result=40 11:14:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:50 Get A/D filter: -9.255963e+061 result=40 11:14:50 Get A/D value=-858993460 result=40 11:14:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:50 Parameters OK 11:14:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:50 Set A/D data flow result=40 11:14:50 Set A/D channel type result=40 11:14:50 Set A/D encoding result=40 11:14:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:50 Set channel filter=0.000000e+000 result=40 11:14:50 Config A/D Result=40 11:14:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:50 Get A/D filter: -9.255963e+061 result=40 11:14:50 Get A/D value=-858993460 result=40 11:14:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:50 Aux= 11:14:50 Message to Camera, serial 114690 queued 11:15:27 Received message from Master: op=PointingHead serial=114703 11:15:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:15:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:15:27 Point started: ret=0 11:15:27 point_skyscan result=0 11:15:27 Received message from Master: op=Identify serial=114704 11:15:28 Check angles 11:15:28 SkyScan query 11:15:28 SkyScan query done: ret=0 az=153.18<-10212 ze=8.835<-11411 Statuses=0009 0009 11:15:28 Msec=0 True Az=153.18 Ze=8.835 Az status=0009 Ze status=0009 11:15:29 Check angles 11:15:29 SkyScan query 11:15:29 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.12<-12808 Statuses=0009 0009 11:15:29 Msec=750 True Az=135.765 Ze=-12.12 Az status=0009 Ze status=0009 11:15:29 Check angles 11:15:29 SkyScan query 11:15:30 SkyScan query done: ret=0 az=118.185<-7879 ze=-33.045<-14203 Statuses=0009 0009 11:15:30 Msec=1500 True Az=118.185 Ze=-33.045 Az status=0009 Ze status=0009 11:15:30 Check angles 11:15:30 SkyScan query 11:15:31 SkyScan query done: ret=0 az=100.8<-6720 ze=-51.51<-15434 Statuses=0009 0009 11:15:31 Msec=2250 True Az=100.8 Ze=-51.51 Az status=0009 Ze status=0009 11:15:31 Check angles 11:15:31 SkyScan query 11:15:31 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:15:31 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:15:32 Check angles 11:15:32 SkyScan query 11:15:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:15:32 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:15:32 Message to Master queued w/err=0: serial=114703 error=0 11:15:37 Received message from Master: op=Filter serial=114707 11:15:37 Color wheel filter change from 0 to 0 11:15:37 FLIGetFilterPos err=0 currentPosition=0 11:15:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:37 Filter is already there-color wheel unchanged 11:15:37 Received message from Master: op=Shutter serial=114708 11:15:37 Shutter LASER close 11:15:37 Received message from Camera: op=State serial=114710 11:15:37 GetSingleValue result=40 Value=cccccccc 11:15:37 SkyScan query 11:15:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:15:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:38 Parameters OK 11:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:38 Set A/D data flow result=40 11:15:38 Set A/D channel type result=40 11:15:38 Set A/D encoding result=40 11:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:38 Set channel filter=0.000000e+000 result=40 11:15:38 Config A/D Result=40 11:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:38 Get A/D filter: -9.255963e+061 result=40 11:15:38 Get A/D value=-858993460 result=40 11:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:38 Parameters OK 11:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:38 Set A/D data flow result=40 11:15:38 Set A/D channel type result=40 11:15:38 Set A/D encoding result=40 11:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:38 Set channel filter=0.000000e+000 result=40 11:15:38 Config A/D Result=40 11:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:38 Get A/D filter: -9.255963e+061 result=40 11:15:38 Get A/D value=-858993460 result=40 11:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:38 Aux= 11:15:38 Message to Camera, serial 114710 queued [UTC 2018-12-13 11:15:52] 11:16:15 Received message from Master: op=PointingHead serial=114723 11:16:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:16:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:16:15 Point started: ret=0 11:16:15 point_skyscan result=0 11:16:16 Check angles 11:16:16 SkyScan query 11:16:16 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.54<-17436 Statuses=0009 0009 11:16:16 Msec=0 True Az=109.2 Ze=-81.54 Az status=0009 Ze status=0009 11:16:17 Check angles 11:16:17 SkyScan query 11:16:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 11:16:17 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 11:16:17 Check angles 11:16:17 SkyScan query 11:16:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 11:16:18 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 11:16:18 Check angles 11:16:18 SkyScan query 11:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 11:16:19 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 11:16:19 Check angles 11:16:19 SkyScan query 11:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.215<-23081 Statuses=0008 0009 11:16:19 Msec=3000 True Az=112.995 Ze=-166.215 Az status=0008 Ze status=0009 11:16:20 Check angles 11:16:20 SkyScan query 11:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:16:20 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:16:20 Message to Master queued w/err=0: serial=114723 error=0 11:16:25 Received message from Master: op=Filter serial=114724 11:16:25 Color wheel filter change from 0 to 0 11:16:25 FLIGetFilterPos err=0 currentPosition=0 11:16:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:25 Filter is already there-color wheel unchanged 11:16:25 Received message from Master: op=Shutter serial=114725 11:16:25 Shutter LASER open 11:16:26 Received message from Camera: op=State serial=114727 11:16:26 GetSingleValue result=40 Value=cccccccc 11:16:26 SkyScan query 11:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:16:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:26 Parameters OK 11:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:26 Set A/D data flow result=40 11:16:26 Set A/D channel type result=40 11:16:26 Set A/D encoding result=40 11:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:26 Set channel filter=0.000000e+000 result=40 11:16:26 Config A/D Result=40 11:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:26 Get A/D filter: -9.255963e+061 result=40 11:16:26 Get A/D value=-858993460 result=40 11:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:26 Parameters OK 11:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:26 Set A/D data flow result=40 11:16:26 Set A/D channel type result=40 11:16:26 Set A/D encoding result=40 11:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:26 Set channel filter=0.000000e+000 result=40 11:16:26 Config A/D Result=40 11:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:26 Get A/D filter: -9.255963e+061 result=40 11:16:26 Get A/D value=-858993460 result=40 11:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:26 Aux= 11:16:26 Message to Camera, serial 114727 queued 11:16:35 Received message from Master: op=Shutter serial=114737 11:16:35 Shutter LASER close 11:16:35 Received message from Master: op=PointingHead serial=114741 11:16:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:16:35 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:16:35 Point started: ret=0 11:16:35 point_skyscan result=0 11:16:36 Check angles 11:16:36 SkyScan query 11:16:37 SkyScan query done: ret=0 az=89.85<-5990 ze=157.47<-1502 Statuses=0009 0009 11:16:37 Msec=0 True Az=89.85 Ze=157.47 Az status=0009 Ze status=0009 11:16:37 Check angles 11:16:37 SkyScan query 11:16:37 SkyScan query done: ret=0 az=72.525<-4835 ze=136.47<-2902 Statuses=0009 0009 11:16:37 Msec=750 True Az=72.525 Ze=136.47 Az status=0009 Ze status=0009 11:16:38 Check angles 11:16:38 SkyScan query 11:16:38 SkyScan query done: ret=0 az=55.02<-3668 ze=115.575<-4295 Statuses=0009 0009 11:16:38 Msec=1500 True Az=55.02 Ze=115.575 Az status=0009 Ze status=0009 11:16:38 Check angles 11:16:38 SkyScan query 11:16:39 SkyScan query done: ret=0 az=40.95<-2730 ze=94.125<-5725 Statuses=0009 0009 11:16:39 Msec=2250 True Az=40.95 Ze=94.125 Az status=0009 Ze status=0009 11:16:39 Check angles 11:16:39 SkyScan query 11:16:40 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 11:16:40 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 11:16:40 Check angles 11:16:40 SkyScan query 11:16:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 11:16:40 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 11:16:41 Check angles 11:16:41 SkyScan query 11:16:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:16:41 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:16:41 Message to Master queued w/err=0: serial=114741 error=0 11:16:46 Received message from Master: op=Filter serial=114742 11:16:46 Color wheel filter change from 0 to 0 11:16:46 FLIGetFilterPos err=0 currentPosition=0 11:16:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:46 Filter is already there-color wheel unchanged 11:16:46 Received message from Master: op=Shutter serial=114743 11:16:46 Shutter LASER close 11:16:47 Received message from Camera: op=State serial=114745 11:16:47 GetSingleValue result=40 Value=cccccccc 11:16:47 SkyScan query 11:16:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:16:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:47 Parameters OK 11:16:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:47 Set A/D data flow result=40 11:16:47 Set A/D channel type result=40 11:16:47 Set A/D encoding result=40 11:16:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:47 Set channel filter=0.000000e+000 result=40 11:16:47 Config A/D Result=40 11:16:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:47 Get A/D filter: -9.255963e+061 result=40 11:16:47 Get A/D value=-858993460 result=40 11:16:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:47 Parameters OK 11:16:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:47 Set A/D data flow result=40 11:16:47 Set A/D channel type result=40 11:16:47 Set A/D encoding result=40 11:16:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:47 Set channel filter=0.000000e+000 result=40 11:16:47 Config A/D Result=40 11:16:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:47 Get A/D filter: -9.255963e+061 result=40 11:16:47 Get A/D value=-858993460 result=40 11:16:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:47 Aux= 11:16:47 Message to Camera, serial 114745 queued 11:17:24 Received message from Master: op=PointingHead serial=114758 11:17:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:17:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:17:24 Point started: ret=0 11:17:24 point_skyscan result=0 11:17:25 Check angles 11:17:25 SkyScan query 11:17:26 SkyScan query done: ret=0 az=64.395<-4293 ze=66.555<-7563 Statuses=0009 0008 11:17:26 Msec=0 True Az=64.395 Ze=66.555 Az status=0009 Ze status=0008 11:17:26 Check angles 11:17:26 SkyScan query 11:17:26 SkyScan query done: ret=0 az=81.915<-5461 ze=66.495<-7567 Statuses=0009 0008 11:17:26 Msec=750 True Az=81.915 Ze=66.495 Az status=0009 Ze status=0008 11:17:27 Check angles 11:17:27 SkyScan query 11:17:27 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 11:17:27 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 11:17:27 Check angles 11:17:27 SkyScan query 11:17:28 SkyScan query done: ret=0 az=116.865<-7791 ze=66.495<-7567 Statuses=0009 0008 11:17:28 Msec=2250 True Az=116.865 Ze=66.495 Az status=0009 Ze status=0008 11:17:28 Check angles 11:17:28 SkyScan query 11:17:29 SkyScan query done: ret=0 az=134.385<-8959 ze=66.495<-7567 Statuses=0009 0008 11:17:29 Msec=3000 True Az=134.385 Ze=66.495 Az status=0009 Ze status=0008 11:17:29 Check angles 11:17:29 SkyScan query 11:17:29 SkyScan query done: ret=0 az=151.68<-10112 ze=66.495<-7567 Statuses=0009 0008 11:17:29 Msec=3750 True Az=151.68 Ze=66.495 Az status=0009 Ze status=0008 11:17:30 Check angles 11:17:30 SkyScan query 11:17:30 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:17:30 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:17:30 Message to Master queued w/err=0: serial=114758 error=0 11:17:35 Received message from Master: op=Filter serial=114759 11:17:35 Color wheel filter change from 0 to 0 11:17:35 FLIGetFilterPos err=0 currentPosition=0 11:17:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:35 Filter is already there-color wheel unchanged 11:17:35 Received message from Master: op=Shutter serial=114760 11:17:35 Shutter LASER close 11:17:35 Received message from Camera: op=State serial=114762 11:17:35 GetSingleValue result=40 Value=cccccccc 11:17:35 SkyScan query 11:17:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:17:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:36 Parameters OK 11:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:36 Set A/D data flow result=40 11:17:36 Set A/D channel type result=40 11:17:36 Set A/D encoding result=40 11:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:36 Set channel filter=0.000000e+000 result=40 11:17:36 Config A/D Result=40 11:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:36 Get A/D filter: -9.255963e+061 result=40 11:17:36 Get A/D value=-858993460 result=40 11:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:36 Parameters OK 11:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:36 Set A/D data flow result=40 11:17:36 Set A/D channel type result=40 11:17:36 Set A/D encoding result=40 11:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:36 Set channel filter=0.000000e+000 result=40 11:17:36 Config A/D Result=40 11:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:36 Get A/D filter: -9.255963e+061 result=40 11:17:36 Get A/D value=-858993460 result=40 11:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:36 Aux= 11:17:36 Message to Camera, serial 114762 queued 11:18:13 Received message from Master: op=PointingHead serial=114775 11:18:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:18:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:18:13 Point started: ret=0 11:18:13 point_skyscan result=0 11:18:14 Check angles 11:18:14 SkyScan query 11:18:15 SkyScan query done: ret=0 az=135.12<-9008 ze=36.825<-9545 Statuses=0009 0009 11:18:15 Msec=0 True Az=135.12 Ze=36.825 Az status=0009 Ze status=0009 11:18:15 Check angles 11:18:15 SkyScan query 11:18:15 SkyScan query done: ret=0 az=117.585<-7839 ze=15.885<-10941 Statuses=0009 0009 11:18:15 Msec=750 True Az=117.585 Ze=15.885 Az status=0009 Ze status=0009 11:18:15 Check angles 11:18:15 SkyScan query 11:18:16 SkyScan query done: ret=0 az=100.275<-6685 ze=-5.085<-12339 Statuses=0009 0009 11:18:16 Msec=1500 True Az=100.275 Ze=-5.085 Az status=0009 Ze status=0009 11:18:16 Check angles 11:18:16 SkyScan query 11:18:17 SkyScan query done: ret=0 az=82.725<-5515 ze=-26.04<-13736 Statuses=0009 0009 11:18:17 Msec=2250 True Az=82.725 Ze=-26.04 Az status=0009 Ze status=0009 11:18:17 Check angles 11:18:17 SkyScan query 11:18:18 SkyScan query done: ret=0 az=65.295<-4353 ze=-38.58<-14572 Statuses=0009 0008 11:18:18 Msec=3000 True Az=65.295 Ze=-38.58 Az status=0009 Ze status=0008 11:18:18 Check angles 11:18:18 SkyScan query 11:18:18 SkyScan query done: ret=0 az=47.79<-3186 ze=-38.52<-14568 Statuses=0009 0008 11:18:18 Msec=3750 True Az=47.79 Ze=-38.52 Az status=0009 Ze status=0008 11:18:18 Check angles 11:18:18 SkyScan query 11:18:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:18:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:18:19 Message to Master queued w/err=0: serial=114775 error=0 11:18:24 Received message from Master: op=Filter serial=114776 11:18:24 Color wheel filter change from 0 to 0 11:18:24 FLIGetFilterPos err=0 currentPosition=0 11:18:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:24 Filter is already there-color wheel unchanged 11:18:24 Received message from Master: op=Shutter serial=114777 11:18:24 Shutter LASER close 11:18:24 Received message from Camera: op=State serial=114779 11:18:24 GetSingleValue result=40 Value=cccccccc 11:18:24 SkyScan query 11:18:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:18:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:25 Parameters OK 11:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:25 Set A/D data flow result=40 11:18:25 Set A/D channel type result=40 11:18:25 Set A/D encoding result=40 11:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:25 Set channel filter=0.000000e+000 result=40 11:18:25 Config A/D Result=40 11:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:25 Get A/D filter: -9.255963e+061 result=40 11:18:25 Get A/D value=-858993460 result=40 11:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:25 Parameters OK 11:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:25 Set A/D data flow result=40 11:18:25 Set A/D channel type result=40 11:18:25 Set A/D encoding result=40 11:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:25 Set channel filter=0.000000e+000 result=40 11:18:25 Config A/D Result=40 11:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:25 Get A/D filter: -9.255963e+061 result=40 11:18:25 Get A/D value=-858993460 result=40 11:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:25 Aux= 11:18:25 Message to Camera, serial 114779 queued 11:19:02 Received message from Master: op=PointingHead serial=114792 11:19:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:19:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:19:02 Point started: ret=0 11:19:02 point_skyscan result=0 11:19:03 Check angles 11:19:03 SkyScan query 11:19:03 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.505<-16567 Statuses=0009 0009 11:19:03 Msec=0 True Az=64.2 Ze=-68.505 Az status=0009 Ze status=0009 11:19:03 Check angles 11:19:03 SkyScan query 11:19:04 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.475<-17965 Statuses=0009 0009 11:19:04 Msec=750 True Az=81.645 Ze=-89.475 Az status=0009 Ze status=0009 11:19:04 Check angles 11:19:04 SkyScan query 11:19:05 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.43<-19362 Statuses=0009 0009 11:19:05 Msec=1500 True Az=99.12 Ze=-110.43 Az status=0009 Ze status=0009 11:19:05 Check angles 11:19:05 SkyScan query 11:19:06 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.355<-20757 Statuses=0009 0009 11:19:06 Msec=2250 True Az=116.625 Ze=-131.355 Az status=0009 Ze status=0009 11:19:06 Check angles 11:19:06 SkyScan query 11:19:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 11:19:06 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 11:19:06 Check angles 11:19:06 SkyScan query 11:19:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:19:07 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:19:07 Message to Master queued w/err=0: serial=114792 error=0 11:19:12 Received message from Master: op=Filter serial=114793 11:19:12 Color wheel filter change from 0 to 0 11:19:12 FLIGetFilterPos err=0 currentPosition=0 11:19:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:12 Filter is already there-color wheel unchanged 11:19:12 Received message from Master: op=Shutter serial=114794 11:19:12 Shutter LASER close 11:19:12 Received message from Camera: op=State serial=114796 11:19:12 GetSingleValue result=40 Value=cccccccc 11:19:12 SkyScan query 11:19:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:19:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:13 Parameters OK 11:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:13 Set A/D data flow result=40 11:19:13 Set A/D channel type result=40 11:19:13 Set A/D encoding result=40 11:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:13 Set channel filter=0.000000e+000 result=40 11:19:13 Config A/D Result=40 11:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:13 Get A/D filter: -9.255963e+061 result=40 11:19:13 Get A/D value=-858993460 result=40 11:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:13 Parameters OK 11:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:13 Set A/D data flow result=40 11:19:13 Set A/D channel type result=40 11:19:13 Set A/D encoding result=40 11:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:13 Set channel filter=0.000000e+000 result=40 11:19:13 Config A/D Result=40 11:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:13 Get A/D filter: -9.255963e+061 result=40 11:19:13 Get A/D value=-858993460 result=40 11:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:13 Aux= 11:19:13 Message to Camera, serial 114796 queued 11:19:50 Received message from Master: op=PointingHead serial=114809 11:19:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:19:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:19:50 Point started: ret=0 11:19:50 point_skyscan result=0 11:19:51 Check angles 11:19:51 SkyScan query 11:19:51 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 11:19:51 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 11:19:52 Check angles 11:19:52 SkyScan query 11:19:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:19:52 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:19:52 Message to Master queued w/err=0: serial=114809 error=0 11:19:57 Received message from Master: op=Filter serial=114810 11:19:57 Color wheel filter change from 0 to 0 11:19:57 FLIGetFilterPos err=0 currentPosition=0 11:19:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:57 Filter is already there-color wheel unchanged 11:19:57 Received message from Master: op=Shutter serial=114811 11:19:57 Shutter LASER open 11:19:57 Received message from Camera: op=State serial=114813 11:19:57 GetSingleValue result=40 Value=cccccccc 11:19:57 SkyScan query 11:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:19:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:58 Parameters OK 11:19:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:58 Set A/D data flow result=40 11:19:58 Set A/D channel type result=40 11:19:58 Set A/D encoding result=40 11:19:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:58 Set channel filter=0.000000e+000 result=40 11:19:58 Config A/D Result=40 11:19:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:58 Get A/D filter: -9.255963e+061 result=40 11:19:58 Get A/D value=-858993460 result=40 11:19:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:58 Parameters OK 11:19:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:58 Set A/D data flow result=40 11:19:58 Set A/D channel type result=40 11:19:58 Set A/D encoding result=40 11:19:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:58 Set channel filter=0.000000e+000 result=40 11:19:58 Config A/D Result=40 11:19:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:58 Get A/D filter: -9.255963e+061 result=40 11:19:58 Get A/D value=-858993460 result=40 11:19:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:58 Aux= 11:19:58 Message to Camera, serial 114813 queued 11:20:06 Received message from Master: op=Shutter serial=114823 11:20:06 Shutter LASER close 11:20:07 Received message from Master: op=PointingHead serial=114827 11:20:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:20:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:20:07 Point started: ret=0 11:20:07 point_skyscan result=0 11:20:08 Check angles 11:20:08 SkyScan query 11:20:09 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.07<-21538 Statuses=0009 0009 11:20:09 Msec=0 True Az=136.17 Ze=-143.07 Az status=0009 Ze status=0009 11:20:09 Check angles 11:20:09 SkyScan query 11:20:09 SkyScan query done: ret=0 az=154.035<-10269 ze=-121.68<-20112 Statuses=0009 0009 11:20:09 Msec=750 True Az=154.035 Ze=-121.68 Az status=0009 Ze status=0009 11:20:10 Check angles 11:20:10 SkyScan query 11:20:10 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.665<-18711 Statuses=0009 0009 11:20:10 Msec=1500 True Az=171.465 Ze=-100.665 Az status=0009 Ze status=0009 11:20:10 Check angles 11:20:10 SkyScan query 11:20:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.77<-17318 Statuses=0008 0009 11:20:11 Msec=2250 True Az=176.01 Ze=-79.77 Az status=0008 Ze status=0009 11:20:11 Check angles 11:20:11 SkyScan query 11:20:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.785<-15919 Statuses=0008 0009 11:20:12 Msec=3000 True Az=176.01 Ze=-58.785 Az status=0008 Ze status=0009 11:20:12 Check angles 11:20:12 SkyScan query 11:20:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:20:13 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:20:13 Message to Master queued w/err=0: serial=114827 error=0 11:20:18 Received message from Master: op=Filter serial=114828 11:20:18 Color wheel filter change from 0 to 0 11:20:18 FLIGetFilterPos err=0 currentPosition=0 11:20:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:18 Filter is already there-color wheel unchanged 11:20:18 Received message from Master: op=Shutter serial=114829 11:20:18 Shutter LASER close 11:20:18 Received message from Camera: op=State serial=114831 11:20:18 GetSingleValue result=40 Value=cccccccc 11:20:18 SkyScan query 11:20:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:20:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:18 Parameters OK 11:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:18 Set A/D data flow result=40 11:20:18 Set A/D channel type result=40 11:20:18 Set A/D encoding result=40 11:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:18 Set channel filter=0.000000e+000 result=40 11:20:18 Config A/D Result=40 11:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:18 Get A/D filter: -9.255963e+061 result=40 11:20:18 Get A/D value=-858993460 result=40 11:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:18 Parameters OK 11:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:18 Set A/D data flow result=40 11:20:18 Set A/D channel type result=40 11:20:18 Set A/D encoding result=40 11:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:18 Set channel filter=0.000000e+000 result=40 11:20:18 Config A/D Result=40 11:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:18 Get A/D filter: -9.255963e+061 result=40 11:20:18 Get A/D value=-858993460 result=40 11:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:18 Aux= 11:20:18 Message to Camera, serial 114831 queued 11:20:55 Received message from Master: op=PointingHead serial=114844 11:20:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:20:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:20:56 Point started: ret=0 11:20:56 point_skyscan result=0 11:20:56 Check angles 11:20:56 SkyScan query 11:20:57 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.81<-13454 Statuses=0009 0009 11:20:57 Msec=0 True Az=152.97 Ze=-21.81 Az status=0009 Ze status=0009 11:20:57 Check angles 11:20:57 SkyScan query 11:20:58 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.81<-12054 Statuses=0009 0009 11:20:58 Msec=750 True Az=135.57 Ze=-0.81 Az status=0009 Ze status=0009 11:20:58 Check angles 11:20:58 SkyScan query 11:20:58 SkyScan query done: ret=0 az=118.005<-7867 ze=20.1<-10660 Statuses=0009 0009 11:20:58 Msec=1500 True Az=118.005 Ze=20.1 Az status=0009 Ze status=0009 11:20:59 Check angles 11:20:59 SkyScan query 11:20:59 SkyScan query done: ret=0 az=100.635<-6709 ze=41.115<-9259 Statuses=0009 0009 11:20:59 Msec=2250 True Az=100.635 Ze=41.115 Az status=0009 Ze status=0009 11:20:59 Check angles 11:20:59 SkyScan query 11:21:00 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 11:21:00 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 11:21:00 Check angles 11:21:00 SkyScan query 11:21:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:21:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:21:01 Message to Master queued w/err=0: serial=114844 error=0 11:21:06 Received message from Master: op=Filter serial=114845 11:21:06 Color wheel filter change from 0 to 0 11:21:06 FLIGetFilterPos err=0 currentPosition=0 11:21:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:06 Filter is already there-color wheel unchanged 11:21:06 Received message from Master: op=Shutter serial=114846 11:21:06 Shutter LASER close 11:21:06 Received message from Camera: op=State serial=114848 11:21:06 GetSingleValue result=40 Value=cccccccc 11:21:06 SkyScan query 11:21:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:21:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:06 Parameters OK 11:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:06 Set A/D data flow result=40 11:21:06 Set A/D channel type result=40 11:21:06 Set A/D encoding result=40 11:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:06 Set channel filter=0.000000e+000 result=40 11:21:06 Config A/D Result=40 11:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:06 Get A/D filter: -9.255963e+061 result=40 11:21:06 Get A/D value=-858993460 result=40 11:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:06 Parameters OK 11:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:06 Set A/D data flow result=40 11:21:06 Set A/D channel type result=40 11:21:06 Set A/D encoding result=40 11:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:06 Set channel filter=0.000000e+000 result=40 11:21:06 Config A/D Result=40 11:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:06 Get A/D filter: -9.255963e+061 result=40 11:21:06 Get A/D value=-858993460 result=40 11:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:06 Aux= 11:21:06 Message to Camera, serial 114848 queued 11:21:43 Received message from Master: op=PointingHead serial=114861 11:21:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:21:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:21:44 Point started: ret=0 11:21:44 point_skyscan result=0 11:21:44 Check angles 11:21:44 SkyScan query 11:21:45 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 11:21:45 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 11:21:45 Check angles 11:21:45 SkyScan query 11:21:46 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 11:21:46 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 11:21:46 Check angles 11:21:46 SkyScan query 11:21:46 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 11:21:46 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 11:21:47 Check angles 11:21:47 SkyScan query 11:21:47 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 11:21:47 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 11:21:47 Check angles 11:21:47 SkyScan query 11:21:48 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:21:48 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:21:48 Check angles 11:21:48 SkyScan query 11:21:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:21:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:21:49 Message to Master queued w/err=0: serial=114861 error=0 11:21:54 Received message from Master: op=Filter serial=114862 11:21:54 Color wheel filter change from 0 to 0 11:21:54 FLIGetFilterPos err=0 currentPosition=0 11:21:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:54 Filter is already there-color wheel unchanged 11:21:54 Received message from Master: op=Shutter serial=114863 11:21:54 Shutter LASER close 11:21:54 Received message from Camera: op=State serial=114865 11:21:54 GetSingleValue result=40 Value=cccccccc 11:21:54 SkyScan query 11:21:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:21:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:55 Parameters OK 11:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:55 Set A/D data flow result=40 11:21:55 Set A/D channel type result=40 11:21:55 Set A/D encoding result=40 11:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:55 Set channel filter=0.000000e+000 result=40 11:21:55 Config A/D Result=40 11:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:55 Get A/D filter: -9.255963e+061 result=40 11:21:55 Get A/D value=-858993460 result=40 11:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:55 Parameters OK 11:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:55 Set A/D data flow result=40 11:21:55 Set A/D channel type result=40 11:21:55 Set A/D encoding result=40 11:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:55 Set channel filter=0.000000e+000 result=40 11:21:55 Config A/D Result=40 11:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:55 Get A/D filter: -9.255963e+061 result=40 11:21:55 Get A/D value=-858993460 result=40 11:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:55 Aux= 11:21:55 Message to Camera, serial 114865 queued 11:22:31 Received message from Master: op=PointingHead serial=114878 11:22:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:22:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:22:32 Point started: ret=0 11:22:32 point_skyscan result=0 11:22:33 Check angles 11:22:33 SkyScan query 11:22:33 SkyScan query done: ret=0 az=153.12<-10208 ze=8.835<-11411 Statuses=0009 0009 11:22:33 Msec=0 True Az=153.12 Ze=8.835 Az status=0009 Ze status=0009 11:22:33 Check angles 11:22:33 SkyScan query 11:22:34 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.135<-12809 Statuses=0009 0009 11:22:34 Msec=750 True Az=135.675 Ze=-12.135 Az status=0009 Ze status=0009 11:22:34 Check angles 11:22:34 SkyScan query 11:22:35 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.075<-14205 Statuses=0009 0009 11:22:35 Msec=1500 True Az=118.02 Ze=-33.075 Az status=0009 Ze status=0009 11:22:35 Check angles 11:22:35 SkyScan query 11:22:35 SkyScan query done: ret=0 az=100.755<-6717 ze=-51.51<-15434 Statuses=0009 0009 11:22:35 Msec=2250 True Az=100.755 Ze=-51.51 Az status=0009 Ze status=0009 11:22:36 Check angles 11:22:36 SkyScan query 11:22:36 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:22:36 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:22:36 Check angles 11:22:36 SkyScan query 11:22:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:22:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:22:37 Message to Master queued w/err=0: serial=114878 error=0 11:22:42 Received message from Master: op=Filter serial=114879 11:22:42 Color wheel filter change from 0 to 0 11:22:42 FLIGetFilterPos err=0 currentPosition=0 11:22:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:42 Filter is already there-color wheel unchanged 11:22:42 Received message from Master: op=Shutter serial=114880 11:22:42 Shutter LASER close 11:22:42 Received message from Camera: op=State serial=114882 11:22:42 GetSingleValue result=40 Value=cccccccc 11:22:42 SkyScan query 11:22:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:43 Parameters OK 11:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:43 Set A/D data flow result=40 11:22:43 Set A/D channel type result=40 11:22:43 Set A/D encoding result=40 11:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:43 Set channel filter=0.000000e+000 result=40 11:22:43 Config A/D Result=40 11:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:43 Get A/D filter: -9.255963e+061 result=40 11:22:43 Get A/D value=-858993460 result=40 11:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:43 Parameters OK 11:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:43 Set A/D data flow result=40 11:22:43 Set A/D channel type result=40 11:22:43 Set A/D encoding result=40 11:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:43 Set channel filter=0.000000e+000 result=40 11:22:43 Config A/D Result=40 11:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:43 Get A/D filter: -9.255963e+061 result=40 11:22:43 Get A/D value=-858993460 result=40 11:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:43 Aux= 11:22:43 Message to Camera, serial 114882 queued 11:23:20 Received message from Master: op=PointingHead serial=114895 11:23:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:23:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:23:20 Point started: ret=0 11:23:20 point_skyscan result=0 11:23:21 Check angles 11:23:21 SkyScan query 11:23:21 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.72<-17448 Statuses=0009 0009 11:23:21 Msec=0 True Az=109.32 Ze=-81.72 Az status=0009 Ze status=0009 11:23:21 Check angles 11:23:21 SkyScan query 11:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.095<-18873 Statuses=0008 0009 11:23:22 Msec=750 True Az=112.995 Ze=-103.095 Az status=0008 Ze status=0009 11:23:22 Check angles 11:23:22 SkyScan query 11:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 11:23:23 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 11:23:23 Check angles 11:23:23 SkyScan query 11:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.975<-21665 Statuses=0008 0009 11:23:23 Msec=2250 True Az=112.995 Ze=-144.975 Az status=0008 Ze status=0009 11:23:24 Check angles 11:23:24 SkyScan query 11:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 11:23:24 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 11:23:24 Check angles 11:23:24 SkyScan query 11:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:23:25 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:23:25 Message to Master queued w/err=0: serial=114895 error=0 11:23:30 Received message from Master: op=Filter serial=114896 11:23:30 Color wheel filter change from 0 to 0 11:23:30 FLIGetFilterPos err=0 currentPosition=0 11:23:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:30 Filter is already there-color wheel unchanged 11:23:30 Received message from Master: op=Shutter serial=114897 11:23:30 Shutter LASER open 11:23:30 Received message from Camera: op=State serial=114899 11:23:30 GetSingleValue result=40 Value=cccccccc 11:23:30 SkyScan query 11:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:23:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:31 Parameters OK 11:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:31 Set A/D data flow result=40 11:23:31 Set A/D channel type result=40 11:23:31 Set A/D encoding result=40 11:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:31 Set channel filter=0.000000e+000 result=40 11:23:31 Config A/D Result=40 11:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:31 Get A/D filter: -9.255963e+061 result=40 11:23:31 Get A/D value=-858993460 result=40 11:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:31 Parameters OK 11:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:31 Set A/D data flow result=40 11:23:31 Set A/D channel type result=40 11:23:31 Set A/D encoding result=40 11:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:31 Set channel filter=0.000000e+000 result=40 11:23:31 Config A/D Result=40 11:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:31 Get A/D filter: -9.255963e+061 result=40 11:23:31 Get A/D value=-858993460 result=40 11:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:31 Aux= 11:23:31 Message to Camera, serial 114899 queued 11:23:39 Received message from Master: op=Shutter serial=114909 11:23:39 Shutter LASER close 11:23:40 Received message from Master: op=PointingHead serial=114913 11:23:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:23:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:23:40 Point started: ret=0 11:23:40 point_skyscan result=0 11:23:41 Check angles 11:23:41 SkyScan query 11:23:42 SkyScan query done: ret=0 az=89.85<-5990 ze=157.38<-1508 Statuses=0009 0009 11:23:42 Msec=0 True Az=89.85 Ze=157.38 Az status=0009 Ze status=0009 11:23:42 Check angles 11:23:42 SkyScan query 11:23:42 SkyScan query done: ret=0 az=72.03<-4802 ze=135.975<-2935 Statuses=0009 0009 11:23:42 Msec=750 True Az=72.03 Ze=135.975 Az status=0009 Ze status=0009 11:23:42 Check angles 11:23:42 SkyScan query 11:23:43 SkyScan query done: ret=0 az=54.75<-3650 ze=115.02<-4332 Statuses=0009 0009 11:23:43 Msec=1500 True Az=54.75 Ze=115.02 Az status=0009 Ze status=0009 11:23:43 Check angles 11:23:43 SkyScan query 11:23:44 SkyScan query done: ret=0 az=40.935<-2729 ze=94.05<-5730 Statuses=0009 0009 11:23:44 Msec=2250 True Az=40.935 Ze=94.05 Az status=0009 Ze status=0009 11:23:44 Check angles 11:23:44 SkyScan query 11:23:45 SkyScan query done: ret=0 az=40.995<-2733 ze=73.095<-7127 Statuses=0008 0009 11:23:45 Msec=3000 True Az=40.995 Ze=73.095 Az status=0008 Ze status=0009 11:23:45 Check angles 11:23:45 SkyScan query 11:23:45 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 11:23:45 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 11:23:45 Check angles 11:23:45 SkyScan query 11:23:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:23:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:23:46 Message to Master queued w/err=0: serial=114913 error=0 11:23:51 Received message from Master: op=Filter serial=114914 11:23:51 Color wheel filter change from 0 to 0 11:23:51 FLIGetFilterPos err=0 currentPosition=0 11:23:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:51 Filter is already there-color wheel unchanged 11:23:51 Received message from Master: op=Shutter serial=114915 11:23:51 Shutter LASER close 11:23:51 Received message from Camera: op=State serial=114917 11:23:51 GetSingleValue result=40 Value=cccccccc 11:23:51 SkyScan query 11:23:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:23:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:52 Parameters OK 11:23:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:52 Set A/D data flow result=40 11:23:52 Set A/D channel type result=40 11:23:52 Set A/D encoding result=40 11:23:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:52 Set channel filter=0.000000e+000 result=40 11:23:52 Config A/D Result=40 11:23:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:52 Get A/D filter: -9.255963e+061 result=40 11:23:52 Get A/D value=-858993460 result=40 11:23:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:52 Parameters OK 11:23:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:52 Set A/D data flow result=40 11:23:52 Set A/D channel type result=40 11:23:52 Set A/D encoding result=40 11:23:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:52 Set channel filter=0.000000e+000 result=40 11:23:52 Config A/D Result=40 11:23:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:52 Get A/D filter: -9.255963e+061 result=40 11:23:52 Get A/D value=-858993460 result=40 11:23:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:52 Aux= 11:23:52 Message to Camera, serial 114917 queued 11:24:29 Received message from Master: op=PointingHead serial=114930 11:24:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:24:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:24:29 Point started: ret=0 11:24:29 point_skyscan result=0 11:24:30 Check angles 11:24:30 SkyScan query 11:24:30 SkyScan query done: ret=0 az=64.41<-4294 ze=66.525<-7565 Statuses=0009 0008 11:24:30 Msec=0 True Az=64.41 Ze=66.525 Az status=0009 Ze status=0008 11:24:31 Check angles 11:24:31 SkyScan query 11:24:31 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 11:24:31 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 11:24:31 Check angles 11:24:31 SkyScan query 11:24:32 SkyScan query done: ret=0 az=99.705<-6647 ze=66.495<-7567 Statuses=0009 0008 11:24:32 Msec=1500 True Az=99.705 Ze=66.495 Az status=0009 Ze status=0008 11:24:32 Check angles 11:24:32 SkyScan query 11:24:33 SkyScan query done: ret=0 az=117.3<-7820 ze=66.495<-7567 Statuses=0009 0008 11:24:33 Msec=2250 True Az=117.3 Ze=66.495 Az status=0009 Ze status=0008 11:24:33 Check angles 11:24:33 SkyScan query 11:24:33 SkyScan query done: ret=0 az=134.7<-8980 ze=66.495<-7567 Statuses=0009 0008 11:24:33 Msec=3000 True Az=134.7 Ze=66.495 Az status=0009 Ze status=0008 11:24:34 Check angles 11:24:34 SkyScan query 11:24:34 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 11:24:34 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 11:24:34 Check angles 11:24:34 SkyScan query 11:24:35 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:24:35 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:24:35 Message to Master queued w/err=0: serial=114930 error=0 11:24:40 Received message from Master: op=Filter serial=114931 11:24:40 Color wheel filter change from 0 to 0 11:24:40 FLIGetFilterPos err=0 currentPosition=0 11:24:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:40 Filter is already there-color wheel unchanged 11:24:40 Received message from Master: op=Shutter serial=114932 11:24:40 Shutter LASER close 11:24:40 Received message from Camera: op=State serial=114934 11:24:40 GetSingleValue result=40 Value=cccccccc 11:24:40 SkyScan query 11:24:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:24:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:41 Parameters OK 11:24:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:41 Set A/D data flow result=40 11:24:41 Set A/D channel type result=40 11:24:41 Set A/D encoding result=40 11:24:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:41 Set channel filter=0.000000e+000 result=40 11:24:41 Config A/D Result=40 11:24:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:41 Get A/D filter: -9.255963e+061 result=40 11:24:41 Get A/D value=-858993460 result=40 11:24:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:41 Parameters OK 11:24:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:41 Set A/D data flow result=40 11:24:41 Set A/D channel type result=40 11:24:41 Set A/D encoding result=40 11:24:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:41 Set channel filter=0.000000e+000 result=40 11:24:41 Config A/D Result=40 11:24:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:41 Get A/D filter: -9.255963e+061 result=40 11:24:41 Get A/D value=-858993460 result=40 11:24:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:41 Aux= 11:24:41 Message to Camera, serial 114934 queued 11:25:18 Received message from Master: op=PointingHead serial=114947 11:25:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:25:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:25:18 Point started: ret=0 11:25:18 point_skyscan result=0 11:25:19 Check angles 11:25:19 SkyScan query 11:25:19 SkyScan query done: ret=0 az=134.58<-8972 ze=36.33<-9578 Statuses=0009 0009 11:25:19 Msec=0 True Az=134.58 Ze=36.33 Az status=0009 Ze status=0009 11:25:20 Check angles 11:25:20 SkyScan query 11:25:20 SkyScan query done: ret=0 az=116.835<-7789 ze=14.91<-11006 Statuses=0009 0009 11:25:20 Msec=750 True Az=116.835 Ze=14.91 Az status=0009 Ze status=0009 11:25:20 Check angles 11:25:20 SkyScan query 11:25:21 SkyScan query done: ret=0 az=99.375<-6625 ze=-6.03<-12402 Statuses=0009 0009 11:25:21 Msec=1500 True Az=99.375 Ze=-6.03 Az status=0009 Ze status=0009 11:25:21 Check angles 11:25:21 SkyScan query 11:25:22 SkyScan query done: ret=0 az=81.945<-5463 ze=-27.015<-13801 Statuses=0009 0009 11:25:22 Msec=2250 True Az=81.945 Ze=-27.015 Az status=0009 Ze status=0009 11:25:22 Check angles 11:25:22 SkyScan query 11:25:22 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.565<-14571 Statuses=0009 0008 11:25:22 Msec=3000 True Az=64.44 Ze=-38.565 Az status=0009 Ze status=0008 11:25:23 Check angles 11:25:23 SkyScan query 11:25:23 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.535<-14569 Statuses=0009 0008 11:25:23 Msec=3750 True Az=46.98 Ze=-38.535 Az status=0009 Ze status=0008 11:25:23 Check angles 11:25:23 SkyScan query 11:25:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:25:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:25:24 Message to Master queued w/err=0: serial=114947 error=0 11:25:29 Received message from Master: op=Filter serial=114948 11:25:29 Color wheel filter change from 0 to 0 11:25:29 FLIGetFilterPos err=0 currentPosition=0 11:25:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:29 Filter is already there-color wheel unchanged 11:25:29 Received message from Master: op=Shutter serial=114949 11:25:29 Shutter LASER close 11:25:29 Received message from Camera: op=State serial=114951 11:25:29 GetSingleValue result=40 Value=cccccccc 11:25:29 SkyScan query 11:25:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:25:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:30 Parameters OK 11:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:30 Set A/D data flow result=40 11:25:30 Set A/D channel type result=40 11:25:30 Set A/D encoding result=40 11:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:30 Set channel filter=0.000000e+000 result=40 11:25:30 Config A/D Result=40 11:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:30 Get A/D filter: -9.255963e+061 result=40 11:25:30 Get A/D value=-858993460 result=40 11:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:30 Parameters OK 11:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:30 Set A/D data flow result=40 11:25:30 Set A/D channel type result=40 11:25:30 Set A/D encoding result=40 11:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:30 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-13 11:25:30] 11:25:30 Config A/D Result=40 11:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:30 Get A/D filter: -9.255963e+061 result=40 11:25:30 Get A/D value=-858993460 result=40 11:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:30 Aux= 11:25:30 Message to Camera, serial 114951 queued 11:26:06 Received message from Master: op=PointingHead serial=114964 11:26:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:26:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:26:07 Point started: ret=0 11:26:07 point_skyscan result=0 11:26:08 Check angles 11:26:08 SkyScan query 11:26:08 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.625<-16575 Statuses=0009 0009 11:26:08 Msec=0 True Az=64.23 Ze=-68.625 Az status=0009 Ze status=0009 11:26:08 Check angles 11:26:08 SkyScan query 11:26:09 SkyScan query done: ret=0 az=82.095<-5473 ze=-90<-18000 Statuses=0009 0009 11:26:09 Msec=750 True Az=82.095 Ze=-90 Az status=0009 Ze status=0009 11:26:09 Check angles 11:26:09 SkyScan query 11:26:10 SkyScan query done: ret=0 az=99.555<-6637 ze=-110.955<-19397 Statuses=0009 0009 11:26:10 Msec=1500 True Az=99.555 Ze=-110.955 Az status=0009 Ze status=0009 11:26:10 Check angles 11:26:10 SkyScan query 11:26:10 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.865<-20791 Statuses=0009 0009 11:26:10 Msec=2250 True Az=117.045 Ze=-131.865 Az status=0009 Ze status=0009 11:26:11 Check angles 11:26:11 SkyScan query 11:26:11 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 11:26:11 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 11:26:11 Check angles 11:26:11 SkyScan query 11:26:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 11:26:12 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 11:26:12 Message to Master queued w/err=0: serial=114964 error=0 11:26:17 Received message from Master: op=Filter serial=114965 11:26:17 Color wheel filter change from 0 to 0 11:26:17 FLIGetFilterPos err=0 currentPosition=0 11:26:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:17 Filter is already there-color wheel unchanged 11:26:17 Received message from Master: op=Shutter serial=114966 11:26:17 Shutter LASER close 11:26:17 Received message from Camera: op=State serial=114968 11:26:17 GetSingleValue result=40 Value=cccccccc 11:26:17 SkyScan query 11:26:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:26:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:18 Parameters OK 11:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:18 Set A/D data flow result=40 11:26:18 Set A/D channel type result=40 11:26:18 Set A/D encoding result=40 11:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:18 Set channel filter=0.000000e+000 result=40 11:26:18 Config A/D Result=40 11:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:18 Get A/D filter: -9.255963e+061 result=40 11:26:18 Get A/D value=-858993460 result=40 11:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:18 Parameters OK 11:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:18 Set A/D data flow result=40 11:26:18 Set A/D channel type result=40 11:26:18 Set A/D encoding result=40 11:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:18 Set channel filter=0.000000e+000 result=40 11:26:18 Config A/D Result=40 11:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:18 Get A/D filter: -9.255963e+061 result=40 11:26:18 Get A/D value=-858993460 result=40 11:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:18 Aux= 11:26:18 Message to Camera, serial 114968 queued 11:26:55 Received message from Master: op=PointingHead serial=114981 11:26:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:26:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:26:55 Point started: ret=0 11:26:55 point_skyscan result=0 11:26:56 Check angles 11:26:56 SkyScan query 11:26:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 11:26:56 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 11:26:56 Check angles 11:26:56 SkyScan query 11:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:26:57 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:26:57 Message to Master queued w/err=0: serial=114981 error=0 11:27:02 Received message from Master: op=Filter serial=114982 11:27:02 Color wheel filter change from 0 to 0 11:27:02 FLIGetFilterPos err=0 currentPosition=0 11:27:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:02 Filter is already there-color wheel unchanged 11:27:02 Received message from Master: op=Shutter serial=114983 11:27:02 Shutter LASER open 11:27:02 Received message from Camera: op=State serial=114985 11:27:02 GetSingleValue result=40 Value=cccccccc 11:27:02 SkyScan query 11:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:27:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:03 Parameters OK 11:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:03 Set A/D data flow result=40 11:27:03 Set A/D channel type result=40 11:27:03 Set A/D encoding result=40 11:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:03 Set channel filter=0.000000e+000 result=40 11:27:03 Config A/D Result=40 11:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:03 Get A/D filter: -9.255963e+061 result=40 11:27:03 Get A/D value=-858993460 result=40 11:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:03 Parameters OK 11:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:03 Set A/D data flow result=40 11:27:03 Set A/D channel type result=40 11:27:03 Set A/D encoding result=40 11:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:03 Set channel filter=0.000000e+000 result=40 11:27:03 Config A/D Result=40 11:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:03 Get A/D filter: -9.255963e+061 result=40 11:27:03 Get A/D value=-858993460 result=40 11:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:03 Aux= 11:27:03 Message to Camera, serial 114985 queued 11:27:10 Received message from Master: op=Shutter serial=114994 11:27:10 Shutter LASER close 11:27:11 Received message from Master: op=PointingHead serial=114998 11:27:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:27:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:27:11 Point started: ret=0 11:27:11 point_skyscan result=0 11:27:12 Check angles 11:27:12 SkyScan query 11:27:13 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.95<-21530 Statuses=0009 0009 11:27:13 Msec=0 True Az=136.38 Ze=-142.95 Az status=0009 Ze status=0009 11:27:13 Check angles 11:27:13 SkyScan query 11:27:13 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.995<-20133 Statuses=0009 0009 11:27:13 Msec=750 True Az=153.87 Ze=-121.995 Az status=0009 Ze status=0009 11:27:14 Check angles 11:27:14 SkyScan query 11:27:14 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.545<-18703 Statuses=0009 0009 11:27:14 Msec=1500 True Az=171.69 Ze=-100.545 Az status=0009 Ze status=0009 11:27:14 Check angles 11:27:14 SkyScan query 11:27:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 11:27:15 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 11:27:15 Check angles 11:27:15 SkyScan query 11:27:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.695<-15913 Statuses=0008 0009 11:27:16 Msec=3000 True Az=176.01 Ze=-58.695 Az status=0008 Ze status=0009 11:27:16 Check angles 11:27:16 SkyScan query 11:27:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:27:16 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:27:16 Message to Master queued w/err=0: serial=114998 error=0 11:27:21 Received message from Master: op=Filter serial=114999 11:27:21 Color wheel filter change from 0 to 0 11:27:21 FLIGetFilterPos err=0 currentPosition=0 11:27:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:21 Filter is already there-color wheel unchanged 11:27:22 Received message from Master: op=Shutter serial=115000 11:27:22 Shutter LASER close 11:27:22 Received message from Camera: op=State serial=115002 11:27:22 GetSingleValue result=40 Value=cccccccc 11:27:22 SkyScan query 11:27:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:27:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:22 Parameters OK 11:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:22 Set A/D data flow result=40 11:27:22 Set A/D channel type result=40 11:27:22 Set A/D encoding result=40 11:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:22 Set channel filter=0.000000e+000 result=40 11:27:22 Config A/D Result=40 11:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:22 Get A/D filter: -9.255963e+061 result=40 11:27:22 Get A/D value=-858993460 result=40 11:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:22 Parameters OK 11:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:22 Set A/D data flow result=40 11:27:22 Set A/D channel type result=40 11:27:22 Set A/D encoding result=40 11:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:22 Set channel filter=0.000000e+000 result=40 11:27:22 Config A/D Result=40 11:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:22 Get A/D filter: -9.255963e+061 result=40 11:27:22 Get A/D value=-858993460 result=40 11:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:22 Aux= 11:27:22 Message to Camera, serial 115002 queued 11:27:59 Received message from Master: op=PointingHead serial=115015 11:27:59 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:27:59 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:28:00 Point started: ret=0 11:28:00 point_skyscan result=0 11:28:00 Check angles 11:28:00 SkyScan query 11:28:01 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.705<-13447 Statuses=0009 0009 11:28:01 Msec=0 True Az=152.97 Ze=-21.705 Az status=0009 Ze status=0009 11:28:01 Check angles 11:28:01 SkyScan query 11:28:02 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.705<-12047 Statuses=0009 0009 11:28:02 Msec=750 True Az=135.405 Ze=-0.705 Az status=0009 Ze status=0009 11:28:02 Check angles 11:28:02 SkyScan query 11:28:02 SkyScan query done: ret=0 az=117.945<-7863 ze=20.205<-10653 Statuses=0009 0009 11:28:02 Msec=1500 True Az=117.945 Ze=20.205 Az status=0009 Ze status=0009 11:28:03 Check angles 11:28:03 SkyScan query 11:28:03 SkyScan query done: ret=0 az=100.59<-6706 ze=41.205<-9253 Statuses=0009 0009 11:28:03 Msec=2250 True Az=100.59 Ze=41.205 Az status=0009 Ze status=0009 11:28:03 Check angles 11:28:03 SkyScan query 11:28:04 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 11:28:04 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 11:28:04 Check angles 11:28:04 SkyScan query 11:28:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:28:05 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 11:28:05 Message to Master queued w/err=0: serial=115015 error=0 11:28:10 Received message from Master: op=Filter serial=115016 11:28:10 Color wheel filter change from 0 to 0 11:28:10 FLIGetFilterPos err=0 currentPosition=0 11:28:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:10 Filter is already there-color wheel unchanged 11:28:10 Received message from Master: op=Shutter serial=115017 11:28:10 Shutter LASER close 11:28:10 Received message from Camera: op=State serial=115019 11:28:10 GetSingleValue result=40 Value=cccccccc 11:28:10 SkyScan query 11:28:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 11:28:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:10 Parameters OK 11:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:10 Set A/D data flow result=40 11:28:10 Set A/D channel type result=40 11:28:10 Set A/D encoding result=40 11:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:10 Set channel filter=0.000000e+000 result=40 11:28:10 Config A/D Result=40 11:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:10 Get A/D filter: -9.255963e+061 result=40 11:28:10 Get A/D value=-858993460 result=40 11:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:10 Parameters OK 11:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:10 Set A/D data flow result=40 11:28:10 Set A/D channel type result=40 11:28:10 Set A/D encoding result=40 11:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:10 Set channel filter=0.000000e+000 result=40 11:28:10 Config A/D Result=40 11:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:10 Get A/D filter: -9.255963e+061 result=40 11:28:10 Get A/D value=-858993460 result=40 11:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:10 Aux= 11:28:10 Message to Camera, serial 115019 queued 11:28:47 Received message from Master: op=PointingHead serial=115032 11:28:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:28:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:28:48 Point started: ret=0 11:28:48 point_skyscan result=0 11:28:48 Check angles 11:28:48 SkyScan query 11:28:49 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 11:28:49 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 11:28:49 Check angles 11:28:49 SkyScan query 11:28:50 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 11:28:50 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 11:28:50 Check angles 11:28:50 SkyScan query 11:28:50 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 11:28:50 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 11:28:51 Check angles 11:28:51 SkyScan query 11:28:51 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 11:28:51 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 11:28:51 Check angles 11:28:51 SkyScan query 11:28:52 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:28:52 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:28:52 Check angles 11:28:52 SkyScan query 11:28:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:28:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:28:53 Message to Master queued w/err=0: serial=115032 error=0 11:28:58 Received message from Master: op=Filter serial=115033 11:28:58 Color wheel filter change from 0 to 0 11:28:58 FLIGetFilterPos err=0 currentPosition=0 11:28:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:58 Filter is already there-color wheel unchanged 11:28:58 Received message from Master: op=Shutter serial=115034 11:28:58 Shutter LASER close 11:28:58 Received message from Camera: op=State serial=115036 11:28:58 GetSingleValue result=40 Value=cccccccc 11:28:58 SkyScan query 11:28:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:28:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:59 Parameters OK 11:28:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:59 Set A/D data flow result=40 11:28:59 Set A/D channel type result=40 11:28:59 Set A/D encoding result=40 11:28:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:59 Set channel filter=0.000000e+000 result=40 11:28:59 Config A/D Result=40 11:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:59 Get A/D filter: -9.255963e+061 result=40 11:28:59 Get A/D value=-858993460 result=40 11:28:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:59 Parameters OK 11:28:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:59 Set A/D data flow result=40 11:28:59 Set A/D channel type result=40 11:28:59 Set A/D encoding result=40 11:28:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:59 Set channel filter=0.000000e+000 result=40 11:28:59 Config A/D Result=40 11:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:59 Get A/D filter: -9.255963e+061 result=40 11:28:59 Get A/D value=-858993460 result=40 11:28:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:59 Aux= 11:28:59 Message to Camera, serial 115036 queued 11:29:35 Received message from Master: op=PointingHead serial=115049 11:29:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:29:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:29:36 Point started: ret=0 11:29:36 point_skyscan result=0 11:29:36 Check angles 11:29:36 SkyScan query 11:29:37 SkyScan query done: ret=0 az=152.79<-10186 ze=8.46<-11436 Statuses=0009 0009 11:29:37 Msec=0 True Az=152.79 Ze=8.46 Az status=0009 Ze status=0009 11:29:37 Check angles 11:29:37 SkyScan query 11:29:38 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.465<-12831 Statuses=0009 0009 11:29:38 Msec=750 True Az=135.36 Ze=-12.465 Az status=0009 Ze status=0009 11:29:38 Check angles 11:29:38 SkyScan query 11:29:39 SkyScan query done: ret=0 az=117.495<-7833 ze=-33.9<-14260 Statuses=0009 0009 11:29:39 Msec=1500 True Az=117.495 Ze=-33.9 Az status=0009 Ze status=0009 11:29:39 Check angles 11:29:39 SkyScan query 11:29:39 SkyScan query done: ret=0 az=100.11<-6674 ze=-51.555<-15437 Statuses=0009 0009 11:29:39 Msec=2250 True Az=100.11 Ze=-51.555 Az status=0009 Ze status=0009 11:29:39 Check angles 11:29:39 SkyScan query 11:29:40 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:29:40 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:29:40 Check angles 11:29:40 SkyScan query 11:29:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:29:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:29:41 Message to Master queued w/err=0: serial=115049 error=0 11:29:46 Received message from Master: op=Filter serial=115050 11:29:46 Color wheel filter change from 0 to 0 11:29:46 FLIGetFilterPos err=0 currentPosition=0 11:29:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:46 Filter is already there-color wheel unchanged 11:29:46 Received message from Master: op=Shutter serial=115051 11:29:46 Shutter LASER close 11:29:46 Received message from Camera: op=State serial=115053 11:29:46 GetSingleValue result=40 Value=cccccccc 11:29:46 SkyScan query 11:29:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:29:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:47 Parameters OK 11:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:47 Set A/D data flow result=40 11:29:47 Set A/D channel type result=40 11:29:47 Set A/D encoding result=40 11:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:47 Set channel filter=0.000000e+000 result=40 11:29:47 Config A/D Result=40 11:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:47 Get A/D filter: -9.255963e+061 result=40 11:29:47 Get A/D value=-858993460 result=40 11:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:47 Parameters OK 11:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:47 Set A/D data flow result=40 11:29:47 Set A/D channel type result=40 11:29:47 Set A/D encoding result=40 11:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:47 Set channel filter=0.000000e+000 result=40 11:29:47 Config A/D Result=40 11:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:47 Get A/D filter: -9.255963e+061 result=40 11:29:47 Get A/D value=-858993460 result=40 11:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:47 Aux= 11:29:47 Message to Camera, serial 115053 queued 11:30:23 Received message from Master: op=PointingHead serial=115066 11:30:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:30:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:30:24 Point started: ret=0 11:30:24 point_skyscan result=0 11:30:25 Check angles 11:30:25 SkyScan query 11:30:25 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.33<-17422 Statuses=0009 0009 11:30:25 Msec=0 True Az=109.005 Ze=-81.33 Az status=0009 Ze status=0009 11:30:25 Check angles 11:30:25 SkyScan query 11:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 11:30:26 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 11:30:26 Check angles 11:30:26 SkyScan query 11:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 11:30:27 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 11:30:27 Check angles 11:30:27 SkyScan query 11:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.21<-21614 Statuses=0008 0009 11:30:27 Msec=2250 True Az=112.995 Ze=-144.21 Az status=0008 Ze status=0009 11:30:28 Check angles 11:30:28 SkyScan query 11:30:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.135<-23009 Statuses=0008 0009 11:30:28 Msec=3000 True Az=112.995 Ze=-165.135 Az status=0008 Ze status=0009 11:30:28 Check angles 11:30:28 SkyScan query 11:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:30:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:30:29 Message to Master queued w/err=0: serial=115066 error=0 11:30:34 Received message from Master: op=Filter serial=115067 11:30:34 Color wheel filter change from 0 to 0 11:30:34 FLIGetFilterPos err=0 currentPosition=0 11:30:34 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:34 Filter is already there-color wheel unchanged 11:30:34 Received message from Master: op=Shutter serial=115068 11:30:34 Shutter LASER open 11:30:34 Received message from Camera: op=State serial=115070 11:30:34 GetSingleValue result=40 Value=cccccccc 11:30:34 SkyScan query 11:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:30:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:35 Parameters OK 11:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:35 Set A/D data flow result=40 11:30:35 Set A/D channel type result=40 11:30:35 Set A/D encoding result=40 11:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:35 Set channel filter=0.000000e+000 result=40 11:30:35 Config A/D Result=40 11:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:35 Get A/D filter: -9.255963e+061 result=40 11:30:35 Get A/D value=-858993460 result=40 11:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:35 Parameters OK 11:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:35 Set A/D data flow result=40 11:30:35 Set A/D channel type result=40 11:30:35 Set A/D encoding result=40 11:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:35 Set channel filter=0.000000e+000 result=40 11:30:35 Config A/D Result=40 11:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:35 Get A/D filter: -9.255963e+061 result=40 11:30:35 Get A/D value=-858993460 result=40 11:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:35 Aux= 11:30:35 Message to Camera, serial 115070 queued 11:30:43 Received message from Master: op=Shutter serial=115080 11:30:43 Shutter LASER close 11:30:44 Received message from Master: op=PointingHead serial=115084 11:30:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:30:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:30:44 Point started: ret=0 11:30:44 point_skyscan result=0 11:30:45 Check angles 11:30:45 SkyScan query 11:30:45 SkyScan query done: ret=0 az=90.15<-6010 ze=157.515<-1499 Statuses=0009 0009 11:30:45 Msec=0 True Az=90.15 Ze=157.515 Az status=0009 Ze status=0009 11:30:45 Check angles 11:30:45 SkyScan query 11:30:46 SkyScan query done: ret=0 az=72.705<-4847 ze=136.53<-2898 Statuses=0009 0009 11:30:46 Msec=750 True Az=72.705 Ze=136.53 Az status=0009 Ze status=0009 11:30:46 Check angles 11:30:46 SkyScan query 11:30:47 SkyScan query done: ret=0 az=55.245<-3683 ze=115.62<-4292 Statuses=0009 0009 11:30:47 Msec=1500 True Az=55.245 Ze=115.62 Az status=0009 Ze status=0009 11:30:47 Check angles 11:30:47 SkyScan query 11:30:48 SkyScan query done: ret=0 az=40.965<-2731 ze=94.635<-5691 Statuses=0009 0009 11:30:48 Msec=2250 True Az=40.965 Ze=94.635 Az status=0009 Ze status=0009 11:30:48 Check angles 11:30:48 SkyScan query 11:30:48 SkyScan query done: ret=0 az=40.995<-2733 ze=73.71<-7086 Statuses=0008 0009 11:30:48 Msec=3000 True Az=40.995 Ze=73.71 Az status=0008 Ze status=0009 11:30:48 Check angles 11:30:48 SkyScan query 11:30:49 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 11:30:49 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 11:30:49 Check angles 11:30:49 SkyScan query 11:30:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:30:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:30:50 Message to Master queued w/err=0: serial=115084 error=0 11:30:55 Received message from Master: op=Filter serial=115085 11:30:55 Color wheel filter change from 0 to 0 11:30:55 FLIGetFilterPos err=0 currentPosition=0 11:30:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:55 Filter is already there-color wheel unchanged 11:30:55 Received message from Master: op=Shutter serial=115086 11:30:55 Shutter LASER close 11:30:55 Received message from Camera: op=State serial=115088 11:30:55 GetSingleValue result=40 Value=cccccccc 11:30:55 SkyScan query 11:30:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:30:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:56 Parameters OK 11:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:56 Set A/D data flow result=40 11:30:56 Set A/D channel type result=40 11:30:56 Set A/D encoding result=40 11:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:56 Set channel filter=0.000000e+000 result=40 11:30:56 Config A/D Result=40 11:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:56 Get A/D filter: -9.255963e+061 result=40 11:30:56 Get A/D value=-858993460 result=40 11:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:56 Parameters OK 11:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:56 Set A/D data flow result=40 11:30:56 Set A/D channel type result=40 11:30:56 Set A/D encoding result=40 11:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:56 Set channel filter=0.000000e+000 result=40 11:30:56 Config A/D Result=40 11:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:56 Get A/D filter: -9.255963e+061 result=40 11:30:56 Get A/D value=-858993460 result=40 11:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:56 Aux= 11:30:56 Message to Camera, serial 115088 queued 11:31:33 Received message from Master: op=PointingHead serial=115101 11:31:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:31:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:31:33 Point started: ret=0 11:31:33 point_skyscan result=0 11:31:34 Check angles 11:31:34 SkyScan query 11:31:34 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 11:31:34 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 11:31:34 Check angles 11:31:34 SkyScan query 11:31:35 SkyScan query done: ret=0 az=81.66<-5444 ze=66.495<-7567 Statuses=0009 0008 11:31:35 Msec=750 True Az=81.66 Ze=66.495 Az status=0009 Ze status=0008 11:31:35 Check angles 11:31:35 SkyScan query 11:31:36 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 11:31:36 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 11:31:36 Check angles 11:31:36 SkyScan query 11:31:36 SkyScan query done: ret=0 az=117.075<-7805 ze=66.495<-7567 Statuses=0009 0008 11:31:36 Msec=2250 True Az=117.075 Ze=66.495 Az status=0009 Ze status=0008 11:31:37 Check angles 11:31:37 SkyScan query 11:31:37 SkyScan query done: ret=0 az=134.49<-8966 ze=66.495<-7567 Statuses=0009 0008 11:31:37 Msec=3000 True Az=134.49 Ze=66.495 Az status=0009 Ze status=0008 11:31:37 Check angles 11:31:37 SkyScan query 11:31:38 SkyScan query done: ret=0 az=152.235<-10149 ze=66.495<-7567 Statuses=0009 0008 11:31:38 Msec=3750 True Az=152.235 Ze=66.495 Az status=0009 Ze status=0008 11:31:38 Check angles 11:31:38 SkyScan query 11:31:39 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:31:39 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:31:39 Message to Master queued w/err=0: serial=115101 error=0 11:31:44 Received message from Master: op=Filter serial=115102 11:31:44 Color wheel filter change from 0 to 0 11:31:44 FLIGetFilterPos err=0 currentPosition=0 11:31:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:44 Filter is already there-color wheel unchanged 11:31:44 Received message from Master: op=Shutter serial=115103 11:31:44 Shutter LASER close 11:31:44 Received message from Camera: op=State serial=115105 11:31:44 GetSingleValue result=40 Value=cccccccc 11:31:44 SkyScan query 11:31:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:31:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:45 Parameters OK 11:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:45 Set A/D data flow result=40 11:31:45 Set A/D channel type result=40 11:31:45 Set A/D encoding result=40 11:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:45 Set channel filter=0.000000e+000 result=40 11:31:45 Config A/D Result=40 11:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:45 Get A/D filter: -9.255963e+061 result=40 11:31:45 Get A/D value=-858993460 result=40 11:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:45 Parameters OK 11:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:45 Set A/D data flow result=40 11:31:45 Set A/D channel type result=40 11:31:45 Set A/D encoding result=40 11:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:45 Set channel filter=0.000000e+000 result=40 11:31:45 Config A/D Result=40 11:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:45 Get A/D filter: -9.255963e+061 result=40 11:31:45 Get A/D value=-858993460 result=40 11:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:45 Aux= 11:31:45 Message to Camera, serial 115105 queued 11:32:21 Received message from Master: op=PointingHead serial=115118 11:32:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:32:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:32:22 Point started: ret=0 11:32:22 point_skyscan result=0 11:32:23 Check angles 11:32:23 SkyScan query 11:32:23 SkyScan query done: ret=0 az=134.58<-8972 ze=36.36<-9576 Statuses=0009 0009 11:32:23 Msec=0 True Az=134.58 Ze=36.36 Az status=0009 Ze status=0009 11:32:23 Check angles 11:32:23 SkyScan query 11:32:24 SkyScan query done: ret=0 az=117.225<-7815 ze=15.45<-10970 Statuses=0009 0009 11:32:24 Msec=750 True Az=117.225 Ze=15.45 Az status=0009 Ze status=0009 11:32:24 Check angles 11:32:24 SkyScan query 11:32:25 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.535<-12369 Statuses=0009 0009 11:32:25 Msec=1500 True Az=99.66 Ze=-5.535 Az status=0009 Ze status=0009 11:32:25 Check angles 11:32:25 SkyScan query 11:32:25 SkyScan query done: ret=0 az=82.38<-5492 ze=-26.505<-13767 Statuses=0009 0009 11:32:25 Msec=2250 True Az=82.38 Ze=-26.505 Az status=0009 Ze status=0009 11:32:26 Check angles 11:32:26 SkyScan query 11:32:26 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.565<-14571 Statuses=0009 0008 11:32:26 Msec=3000 True Az=64.86 Ze=-38.565 Az status=0009 Ze status=0008 11:32:26 Check angles 11:32:26 SkyScan query 11:32:27 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.535<-14569 Statuses=0009 0008 11:32:27 Msec=3750 True Az=47.415 Ze=-38.535 Az status=0009 Ze status=0008 11:32:27 Check angles 11:32:27 SkyScan query 11:32:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:32:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:32:28 Message to Master queued w/err=0: serial=115118 error=0 11:32:33 Received message from Master: op=Filter serial=115119 11:32:33 Color wheel filter change from 0 to 0 11:32:33 FLIGetFilterPos err=0 currentPosition=0 11:32:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:33 Filter is already there-color wheel unchanged 11:32:33 Received message from Master: op=Shutter serial=115120 11:32:33 Shutter LASER close 11:32:33 Received message from Camera: op=State serial=115122 11:32:33 GetSingleValue result=40 Value=cccccccc 11:32:33 SkyScan query 11:32:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:32:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:33 Parameters OK 11:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:33 Set A/D data flow result=40 11:32:33 Set A/D channel type result=40 11:32:33 Set A/D encoding result=40 11:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:33 Set channel filter=0.000000e+000 result=40 11:32:33 Config A/D Result=40 11:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:33 Get A/D filter: -9.255963e+061 result=40 11:32:33 Get A/D value=-858993460 result=40 11:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:33 Parameters OK 11:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:33 Set A/D data flow result=40 11:32:33 Set A/D channel type result=40 11:32:33 Set A/D encoding result=40 11:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:33 Set channel filter=0.000000e+000 result=40 11:32:33 Config A/D Result=40 11:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:33 Get A/D filter: -9.255963e+061 result=40 11:32:33 Get A/D value=-858993460 result=40 11:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:33 Aux= 11:32:33 Message to Camera, serial 115122 queued 11:33:10 Received message from Master: op=PointingHead serial=115135 11:33:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:33:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:33:11 Point started: ret=0 11:33:11 point_skyscan result=0 11:33:11 Check angles 11:33:11 SkyScan query 11:33:12 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.145<-16543 Statuses=0009 0009 11:33:12 Msec=0 True Az=64.005 Ze=-68.145 Az status=0009 Ze status=0009 11:33:12 Check angles 11:33:12 SkyScan query 11:33:13 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.145<-17943 Statuses=0009 0009 11:33:13 Msec=750 True Az=81.36 Ze=-89.145 Az status=0009 Ze status=0009 11:33:13 Check angles 11:33:13 SkyScan query 11:33:13 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.085<-19339 Statuses=0009 0009 11:33:13 Msec=1500 True Az=98.865 Ze=-110.085 Az status=0009 Ze status=0009 11:33:14 Check angles 11:33:14 SkyScan query 11:33:14 SkyScan query done: ret=0 az=116.205<-7747 ze=-131.04<-20736 Statuses=0009 0009 11:33:14 Msec=2250 True Az=116.205 Ze=-131.04 Az status=0009 Ze status=0009 11:33:14 Check angles 11:33:14 SkyScan query 11:33:15 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 11:33:15 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 11:33:15 Check angles 11:33:15 SkyScan query 11:33:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:33:16 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:33:16 Message to Master queued w/err=0: serial=115135 error=0 11:33:21 Received message from Master: op=Filter serial=115136 11:33:21 Color wheel filter change from 0 to 0 11:33:21 FLIGetFilterPos err=0 currentPosition=0 11:33:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:21 Filter is already there-color wheel unchanged 11:33:21 Received message from Master: op=Shutter serial=115137 11:33:21 Shutter LASER close 11:33:21 Received message from Camera: op=State serial=115139 11:33:21 GetSingleValue result=40 Value=cccccccc 11:33:21 SkyScan query 11:33:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:33:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:21 Parameters OK 11:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:21 Set A/D data flow result=40 11:33:21 Set A/D channel type result=40 11:33:21 Set A/D encoding result=40 11:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:21 Set channel filter=0.000000e+000 result=40 11:33:21 Config A/D Result=40 11:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:21 Get A/D filter: -9.255963e+061 result=40 11:33:21 Get A/D value=-858993460 result=40 11:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:21 Parameters OK 11:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:21 Set A/D data flow result=40 11:33:21 Set A/D channel type result=40 11:33:21 Set A/D encoding result=40 11:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:21 Set channel filter=0.000000e+000 result=40 11:33:21 Config A/D Result=40 11:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:21 Get A/D filter: -9.255963e+061 result=40 11:33:21 Get A/D value=-858993460 result=40 11:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:21 Aux= 11:33:21 Message to Camera, serial 115139 queued 11:33:58 Received message from Master: op=PointingHead serial=115152 11:33:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:33:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:33:59 Point started: ret=0 11:33:59 point_skyscan result=0 11:33:59 Check angles 11:33:59 SkyScan query 11:34:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 11:34:00 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 11:34:00 Check angles 11:34:00 SkyScan query 11:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:34:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:34:01 Message to Master queued w/err=0: serial=115152 error=0 11:34:06 Received message from Master: op=Filter serial=115153 11:34:06 Color wheel filter change from 0 to 0 11:34:06 FLIGetFilterPos err=0 currentPosition=0 11:34:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:06 Filter is already there-color wheel unchanged 11:34:06 Received message from Master: op=Shutter serial=115154 11:34:06 Shutter LASER open 11:34:06 Received message from Camera: op=State serial=115156 11:34:06 GetSingleValue result=40 Value=cccccccc 11:34:06 SkyScan query 11:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:34:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:07 Parameters OK 11:34:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:07 Set A/D data flow result=40 11:34:07 Set A/D channel type result=40 11:34:07 Set A/D encoding result=40 11:34:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:07 Set channel filter=0.000000e+000 result=40 11:34:07 Config A/D Result=40 11:34:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:07 Get A/D filter: -9.255963e+061 result=40 11:34:07 Get A/D value=-858993460 result=40 11:34:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:07 Parameters OK 11:34:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:07 Set A/D data flow result=40 11:34:07 Set A/D channel type result=40 11:34:07 Set A/D encoding result=40 11:34:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:07 Set channel filter=0.000000e+000 result=40 11:34:07 Config A/D Result=40 11:34:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:07 Get A/D filter: -9.255963e+061 result=40 11:34:07 Get A/D value=-858993460 result=40 11:34:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:07 Aux= 11:34:07 Message to Camera, serial 115156 queued 11:34:15 Received message from Master: op=Shutter serial=115166 11:34:15 Shutter LASER close 11:34:16 Received message from Master: op=PointingHead serial=115170 11:34:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:34:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:34:16 Point started: ret=0 11:34:16 point_skyscan result=0 11:34:17 Check angles 11:34:17 SkyScan query 11:34:17 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.875<-21525 Statuses=0009 0009 11:34:17 Msec=0 True Az=136.23 Ze=-142.875 Az status=0009 Ze status=0009 11:34:18 Check angles 11:34:18 SkyScan query 11:34:18 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.92<-20128 Statuses=0009 0009 11:34:18 Msec=750 True Az=153.69 Ze=-121.92 Az status=0009 Ze status=0009 11:34:18 Check angles 11:34:18 SkyScan query 11:34:19 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.98<-18732 Statuses=0009 0009 11:34:19 Msec=1500 True Az=171.24 Ze=-100.98 Az status=0009 Ze status=0009 11:34:19 Check angles 11:34:19 SkyScan query 11:34:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.07<-17338 Statuses=0008 0009 11:34:20 Msec=2250 True Az=176.01 Ze=-80.07 Az status=0008 Ze status=0009 11:34:20 Check angles 11:34:20 SkyScan query 11:34:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.07<-15938 Statuses=0008 0009 11:34:20 Msec=3000 True Az=176.01 Ze=-59.07 Az status=0008 Ze status=0009 11:34:21 Check angles 11:34:21 SkyScan query 11:34:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:34:21 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:34:21 Message to Master queued w/err=0: serial=115170 error=0 11:34:26 Received message from Master: op=Filter serial=115171 11:34:26 Color wheel filter change from 0 to 0 11:34:26 FLIGetFilterPos err=0 currentPosition=0 11:34:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:26 Filter is already there-color wheel unchanged 11:34:26 Received message from Master: op=Shutter serial=115172 11:34:26 Shutter LASER close 11:34:26 Received message from Camera: op=State serial=115174 11:34:26 GetSingleValue result=40 Value=cccccccc 11:34:26 SkyScan query 11:34:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:34:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:27 Parameters OK 11:34:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:27 Set A/D data flow result=40 11:34:27 Set A/D channel type result=40 11:34:27 Set A/D encoding result=40 11:34:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:27 Set channel filter=0.000000e+000 result=40 11:34:27 Config A/D Result=40 11:34:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:27 Get A/D filter: -9.255963e+061 result=40 11:34:27 Get A/D value=-858993460 result=40 11:34:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:27 Parameters OK 11:34:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:27 Set A/D data flow result=40 11:34:27 Set A/D channel type result=40 11:34:27 Set A/D encoding result=40 11:34:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:27 Set channel filter=0.000000e+000 result=40 11:34:27 Config A/D Result=40 11:34:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:27 Get A/D filter: -9.255963e+061 result=40 11:34:27 Get A/D value=-858993460 result=40 11:34:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:27 Aux= 11:34:27 Message to Camera, serial 115174 queued 11:35:04 Received message from Master: op=PointingHead serial=115187 11:35:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:35:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:35:04 Point started: ret=0 11:35:04 point_skyscan result=0 11:35:05 Check angles 11:35:05 SkyScan query 11:35:06 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.54<-13436 Statuses=0009 0009 11:35:06 Msec=0 True Az=152.76 Ze=-21.54 Az status=0009 Ze status=0009 11:35:06 Check angles 11:35:06 SkyScan query 11:35:06 SkyScan query done: ret=0 az=135.33<-9022 ze=-0.54<-12036 Statuses=0009 0009 11:35:06 Msec=750 True Az=135.33 Ze=-0.54 Az status=0009 Ze status=0009 11:35:06 Check angles 11:35:06 SkyScan query 11:35:07 SkyScan query done: ret=0 az=117.78<-7852 ze=20.385<-10641 Statuses=0009 0009 11:35:07 Msec=1500 True Az=117.78 Ze=20.385 Az status=0009 Ze status=0009 11:35:07 Check angles 11:35:07 SkyScan query 11:35:08 SkyScan query done: ret=0 az=100.38<-6692 ze=41.37<-9242 Statuses=0009 0009 11:35:08 Msec=2250 True Az=100.38 Ze=41.37 Az status=0009 Ze status=0009 11:35:08 Check angles 11:35:08 SkyScan query 11:35:09 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 11:35:09 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 11:35:09 Check angles 11:35:09 SkyScan query 11:35:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 11:35:09 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 11:35:09 Message to Master queued w/err=0: serial=115187 error=0 11:35:14 Received message from Master: op=Filter serial=115188 11:35:14 Color wheel filter change from 0 to 0 11:35:14 FLIGetFilterPos err=0 currentPosition=0 11:35:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:14 Filter is already there-color wheel unchanged 11:35:14 Received message from Master: op=Shutter serial=115189 11:35:14 Shutter LASER close 11:35:15 Received message from Camera: op=State serial=115191 11:35:15 GetSingleValue result=40 Value=cccccccc 11:35:15 SkyScan query 11:35:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:35:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:15 Parameters OK 11:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:15 Set A/D data flow result=40 11:35:15 Set A/D channel type result=40 11:35:15 Set A/D encoding result=40 11:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:15 Set channel filter=0.000000e+000 result=40 11:35:15 Config A/D Result=40 11:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:15 Get A/D filter: -9.255963e+061 result=40 11:35:15 Get A/D value=-858993460 result=40 11:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:15 Parameters OK 11:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:15 Set A/D data flow result=40 11:35:15 Set A/D channel type result=40 11:35:15 Set A/D encoding result=40 11:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:15 Set channel filter=0.000000e+000 result=40 11:35:15 Config A/D Result=40 11:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:15 Get A/D filter: -9.255963e+061 result=40 11:35:15 Get A/D value=-858993460 result=40 11:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:15 Aux= 11:35:15 Message to Camera, serial 115191 queued 11:35:52 Received message from Master: op=PointingHead serial=115204 11:35:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:35:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:35:52 Point started: ret=0 11:35:52 point_skyscan result=0 [UTC 2018-12-13 11:35:52] 11:35:53 Check angles 11:35:53 SkyScan query 11:35:54 SkyScan query done: ret=0 az=109.455<-7297 ze=38.49<-9434 Statuses=0009 0008 11:35:54 Msec=0 True Az=109.455 Ze=38.49 Az status=0009 Ze status=0008 11:35:54 Check angles 11:35:54 SkyScan query 11:35:54 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 11:35:54 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 11:35:55 Check angles 11:35:55 SkyScan query 11:35:55 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 11:35:55 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 11:35:55 Check angles 11:35:55 SkyScan query 11:35:56 SkyScan query done: ret=0 az=161.835<-10789 ze=38.505<-9433 Statuses=0009 0008 11:35:56 Msec=2250 True Az=161.835 Ze=38.505 Az status=0009 Ze status=0008 11:35:56 Check angles 11:35:56 SkyScan query 11:35:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:35:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:35:57 Check angles 11:35:57 SkyScan query 11:35:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:35:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:35:57 Message to Master queued w/err=0: serial=115204 error=0 11:36:02 Received message from Master: op=Filter serial=115205 11:36:02 Color wheel filter change from 0 to 0 11:36:02 FLIGetFilterPos err=0 currentPosition=0 11:36:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:02 Filter is already there-color wheel unchanged 11:36:03 Received message from Master: op=Shutter serial=115206 11:36:03 Shutter LASER close 11:36:03 Received message from Camera: op=State serial=115208 11:36:03 GetSingleValue result=40 Value=cccccccc 11:36:03 SkyScan query 11:36:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:36:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:03 Parameters OK 11:36:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:03 Set A/D data flow result=40 11:36:03 Set A/D channel type result=40 11:36:03 Set A/D encoding result=40 11:36:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:03 Set channel filter=0.000000e+000 result=40 11:36:03 Config A/D Result=40 11:36:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:03 Get A/D filter: -9.255963e+061 result=40 11:36:03 Get A/D value=-858993460 result=40 11:36:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:03 Parameters OK 11:36:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:03 Set A/D data flow result=40 11:36:03 Set A/D channel type result=40 11:36:03 Set A/D encoding result=40 11:36:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:03 Set channel filter=0.000000e+000 result=40 11:36:03 Config A/D Result=40 11:36:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:03 Get A/D filter: -9.255963e+061 result=40 11:36:03 Get A/D value=-858993460 result=40 11:36:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:03 Aux= 11:36:03 Message to Camera, serial 115208 queued 11:36:40 Received message from Master: op=PointingHead serial=115221 11:36:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:36:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:36:40 Point started: ret=0 11:36:40 point_skyscan result=0 11:36:41 Check angles 11:36:41 SkyScan query 11:36:42 SkyScan query done: ret=0 az=152.97<-10198 ze=8.595<-11427 Statuses=0009 0009 11:36:42 Msec=0 True Az=152.97 Ze=8.595 Az status=0009 Ze status=0009 11:36:42 Check angles 11:36:42 SkyScan query 11:36:43 SkyScan query done: ret=0 az=135.075<-9005 ze=-12.78<-12852 Statuses=0009 0009 11:36:43 Msec=750 True Az=135.075 Ze=-12.78 Az status=0009 Ze status=0009 11:36:43 Check angles 11:36:43 SkyScan query 11:36:43 SkyScan query done: ret=0 az=117.255<-7817 ze=-34.215<-14281 Statuses=0009 0009 11:36:43 Msec=1500 True Az=117.255 Ze=-34.215 Az status=0009 Ze status=0009 11:36:43 Check angles 11:36:43 SkyScan query 11:36:44 SkyScan query done: ret=0 az=99.825<-6655 ze=-51.57<-15438 Statuses=0009 0009 11:36:44 Msec=2250 True Az=99.825 Ze=-51.57 Az status=0009 Ze status=0009 11:36:44 Check angles 11:36:44 SkyScan query 11:36:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 11:36:45 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 11:36:45 Check angles 11:36:45 SkyScan query 11:36:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:36:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:36:46 Message to Master queued w/err=0: serial=115221 error=0 11:36:51 Received message from Master: op=Filter serial=115222 11:36:51 Color wheel filter change from 0 to 0 11:36:51 FLIGetFilterPos err=0 currentPosition=0 11:36:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:51 Filter is already there-color wheel unchanged 11:36:51 Received message from Master: op=Shutter serial=115223 11:36:51 Shutter LASER close 11:36:51 Received message from Camera: op=State serial=115225 11:36:51 GetSingleValue result=40 Value=cccccccc 11:36:51 SkyScan query 11:36:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:36:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:51 Parameters OK 11:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:51 Set A/D data flow result=40 11:36:51 Set A/D channel type result=40 11:36:51 Set A/D encoding result=40 11:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:51 Set channel filter=0.000000e+000 result=40 11:36:51 Config A/D Result=40 11:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:51 Get A/D filter: -9.255963e+061 result=40 11:36:51 Get A/D value=-858993460 result=40 11:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:51 Parameters OK 11:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:51 Set A/D data flow result=40 11:36:51 Set A/D channel type result=40 11:36:51 Set A/D encoding result=40 11:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:51 Set channel filter=0.000000e+000 result=40 11:36:51 Config A/D Result=40 11:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:51 Get A/D filter: -9.255963e+061 result=40 11:36:51 Get A/D value=-858993460 result=40 11:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:51 Aux= 11:36:51 Message to Camera, serial 115225 queued 11:37:28 Received message from Master: op=PointingHead serial=115238 11:37:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:37:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:37:29 Point started: ret=0 11:37:29 point_skyscan result=0 11:37:29 Check angles 11:37:29 SkyScan query 11:37:30 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.03<-17402 Statuses=0009 0009 11:37:30 Msec=0 True Az=108.795 Ze=-81.03 Az status=0009 Ze status=0009 11:37:30 Check angles 11:37:30 SkyScan query 11:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 11:37:31 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 11:37:31 Check angles 11:37:31 SkyScan query 11:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 11:37:31 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 11:37:32 Check angles 11:37:32 SkyScan query 11:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 11:37:32 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 11:37:32 Check angles 11:37:32 SkyScan query 11:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.865<-22991 Statuses=0008 0009 11:37:33 Msec=3000 True Az=112.995 Ze=-164.865 Az status=0008 Ze status=0009 11:37:33 Check angles 11:37:33 SkyScan query 11:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:37:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:37:34 Message to Master queued w/err=0: serial=115238 error=0 11:37:39 Received message from Master: op=Filter serial=115239 11:37:39 Color wheel filter change from 0 to 0 11:37:39 FLIGetFilterPos err=0 currentPosition=0 11:37:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:39 Filter is already there-color wheel unchanged 11:37:39 Received message from Master: op=Shutter serial=115240 11:37:39 Shutter LASER open 11:37:39 Received message from Camera: op=State serial=115242 11:37:39 GetSingleValue result=40 Value=cccccccc 11:37:39 SkyScan query 11:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:37:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:40 Parameters OK 11:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:40 Set A/D data flow result=40 11:37:40 Set A/D channel type result=40 11:37:40 Set A/D encoding result=40 11:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:40 Set channel filter=0.000000e+000 result=40 11:37:40 Config A/D Result=40 11:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:40 Get A/D filter: -9.255963e+061 result=40 11:37:40 Get A/D value=-858993460 result=40 11:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:40 Parameters OK 11:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:40 Set A/D data flow result=40 11:37:40 Set A/D channel type result=40 11:37:40 Set A/D encoding result=40 11:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:40 Set channel filter=0.000000e+000 result=40 11:37:40 Config A/D Result=40 11:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:40 Get A/D filter: -9.255963e+061 result=40 11:37:40 Get A/D value=-858993460 result=40 11:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:40 Aux= 11:37:40 Message to Camera, serial 115242 queued 11:37:48 Received message from Master: op=Shutter serial=115252 11:37:48 Shutter LASER close 11:37:48 Received message from Master: op=PointingHead serial=115256 11:37:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:37:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:37:49 Point started: ret=0 11:37:49 point_skyscan result=0 11:37:49 Check angles 11:37:49 SkyScan query 11:37:50 SkyScan query done: ret=0 az=89.865<-5991 ze=157.335<-1511 Statuses=0009 0009 11:37:50 Msec=0 True Az=89.865 Ze=157.335 Az status=0009 Ze status=0009 11:37:50 Check angles 11:37:50 SkyScan query 11:37:51 SkyScan query done: ret=0 az=72.465<-4831 ze=136.335<-2911 Statuses=0009 0009 11:37:51 Msec=750 True Az=72.465 Ze=136.335 Az status=0009 Ze status=0009 11:37:51 Check angles 11:37:51 SkyScan query 11:37:52 SkyScan query done: ret=0 az=55.05<-3670 ze=115.425<-4305 Statuses=0009 0009 11:37:52 Msec=1500 True Az=55.05 Ze=115.425 Az status=0009 Ze status=0009 11:37:52 Check angles 11:37:52 SkyScan query 11:37:52 SkyScan query done: ret=0 az=40.935<-2729 ze=94.41<-5706 Statuses=0009 0009 11:37:52 Msec=2250 True Az=40.935 Ze=94.41 Az status=0009 Ze status=0009 11:37:52 Check angles 11:37:52 SkyScan query 11:37:53 SkyScan query done: ret=0 az=40.995<-2733 ze=73.485<-7101 Statuses=0008 0009 11:37:53 Msec=3000 True Az=40.995 Ze=73.485 Az status=0008 Ze status=0009 11:37:53 Check angles 11:37:53 SkyScan query 11:37:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 11:37:54 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 11:37:54 Check angles 11:37:54 SkyScan query 11:37:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:37:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:37:55 Message to Master queued w/err=0: serial=115256 error=0 11:38:00 Received message from Master: op=Filter serial=115257 11:38:00 Color wheel filter change from 0 to 0 11:38:00 FLIGetFilterPos err=0 currentPosition=0 11:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:00 Filter is already there-color wheel unchanged 11:38:00 Received message from Master: op=Shutter serial=115258 11:38:00 Shutter LASER close 11:38:00 Received message from Camera: op=State serial=115260 11:38:00 GetSingleValue result=40 Value=cccccccc 11:38:00 SkyScan query 11:38:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:38:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:00 Parameters OK 11:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:00 Set A/D data flow result=40 11:38:00 Set A/D channel type result=40 11:38:00 Set A/D encoding result=40 11:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:00 Set channel filter=0.000000e+000 result=40 11:38:00 Config A/D Result=40 11:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:00 Get A/D filter: -9.255963e+061 result=40 11:38:00 Get A/D value=-858993460 result=40 11:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:00 Parameters OK 11:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:00 Set A/D data flow result=40 11:38:00 Set A/D channel type result=40 11:38:00 Set A/D encoding result=40 11:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:00 Set channel filter=0.000000e+000 result=40 11:38:00 Config A/D Result=40 11:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:00 Get A/D filter: -9.255963e+061 result=40 11:38:00 Get A/D value=-858993460 result=40 11:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:00 Aux= 11:38:00 Message to Camera, serial 115260 queued 11:38:37 Received message from Master: op=PointingHead serial=115273 11:38:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:38:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:38:38 Point started: ret=0 11:38:38 point_skyscan result=0 11:38:38 Check angles 11:38:38 SkyScan query 11:38:39 SkyScan query done: ret=0 az=63.885<-4259 ze=66.555<-7563 Statuses=0009 0008 11:38:39 Msec=0 True Az=63.885 Ze=66.555 Az status=0009 Ze status=0008 11:38:39 Check angles 11:38:39 SkyScan query 11:38:40 SkyScan query done: ret=0 az=81.225<-5415 ze=66.495<-7567 Statuses=0009 0008 11:38:40 Msec=750 True Az=81.225 Ze=66.495 Az status=0009 Ze status=0008 11:38:40 Check angles 11:38:40 SkyScan query 11:38:41 SkyScan query done: ret=0 az=98.7<-6580 ze=66.495<-7567 Statuses=0009 0008 11:38:41 Msec=1500 True Az=98.7 Ze=66.495 Az status=0009 Ze status=0008 11:38:41 Check angles 11:38:41 SkyScan query 11:38:41 SkyScan query done: ret=0 az=116.205<-7747 ze=66.495<-7567 Statuses=0009 0008 11:38:41 Msec=2250 True Az=116.205 Ze=66.495 Az status=0009 Ze status=0008 11:38:41 Check angles 11:38:41 SkyScan query 11:38:42 SkyScan query done: ret=0 az=133.68<-8912 ze=66.495<-7567 Statuses=0009 0008 11:38:42 Msec=3000 True Az=133.68 Ze=66.495 Az status=0009 Ze status=0008 11:38:42 Check angles 11:38:42 SkyScan query 11:38:43 SkyScan query done: ret=0 az=151.05<-10070 ze=66.495<-7567 Statuses=0009 0008 11:38:43 Msec=3750 True Az=151.05 Ze=66.495 Az status=0009 Ze status=0008 11:38:43 Check angles 11:38:43 SkyScan query 11:38:44 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:38:44 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:38:44 Message to Master queued w/err=0: serial=115273 error=0 11:38:49 Received message from Master: op=Filter serial=115274 11:38:49 Color wheel filter change from 0 to 0 11:38:49 FLIGetFilterPos err=0 currentPosition=0 11:38:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:49 Filter is already there-color wheel unchanged 11:38:49 Received message from Master: op=Shutter serial=115275 11:38:49 Shutter LASER close 11:38:49 Received message from Camera: op=State serial=115277 11:38:49 GetSingleValue result=40 Value=cccccccc 11:38:49 SkyScan query 11:38:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:49 Parameters OK 11:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:49 Set A/D data flow result=40 11:38:49 Set A/D channel type result=40 11:38:49 Set A/D encoding result=40 11:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:49 Set channel filter=0.000000e+000 result=40 11:38:49 Config A/D Result=40 11:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:49 Get A/D filter: -9.255963e+061 result=40 11:38:49 Get A/D value=-858993460 result=40 11:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:49 Parameters OK 11:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:49 Set A/D data flow result=40 11:38:49 Set A/D channel type result=40 11:38:49 Set A/D encoding result=40 11:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:49 Set channel filter=0.000000e+000 result=40 11:38:49 Config A/D Result=40 11:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:49 Get A/D filter: -9.255963e+061 result=40 11:38:49 Get A/D value=-858993460 result=40 11:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:49 Aux= 11:38:49 Message to Camera, serial 115277 queued 11:39:26 Received message from Master: op=PointingHead serial=115290 11:39:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:39:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:39:27 Point started: ret=0 11:39:27 point_skyscan result=0 11:39:27 Check angles 11:39:27 SkyScan query 11:39:28 SkyScan query done: ret=0 az=134.82<-8988 ze=36.6<-9560 Statuses=0009 0009 11:39:28 Msec=0 True Az=134.82 Ze=36.6 Az status=0009 Ze status=0009 11:39:28 Check angles 11:39:28 SkyScan query 11:39:29 SkyScan query done: ret=0 az=116.895<-7793 ze=15.24<-10984 Statuses=0009 0009 11:39:29 Msec=750 True Az=116.895 Ze=15.24 Az status=0009 Ze status=0009 11:39:29 Check angles 11:39:29 SkyScan query 11:39:29 SkyScan query done: ret=0 az=99.6<-6640 ze=-5.76<-12384 Statuses=0009 0009 11:39:29 Msec=1500 True Az=99.6 Ze=-5.76 Az status=0009 Ze status=0009 11:39:30 Check angles 11:39:30 SkyScan query 11:39:30 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.745<-13783 Statuses=0009 0009 11:39:30 Msec=2250 True Az=82.155 Ze=-26.745 Az status=0009 Ze status=0009 11:39:30 Check angles 11:39:30 SkyScan query 11:39:31 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.565<-14571 Statuses=0009 0008 11:39:31 Msec=3000 True Az=64.635 Ze=-38.565 Az status=0009 Ze status=0008 11:39:31 Check angles 11:39:31 SkyScan query 11:39:32 SkyScan query done: ret=0 az=47.205<-3147 ze=-38.535<-14569 Statuses=0009 0008 11:39:32 Msec=3750 True Az=47.205 Ze=-38.535 Az status=0009 Ze status=0008 11:39:32 Check angles 11:39:32 SkyScan query 11:39:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:39:32 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:39:32 Message to Master queued w/err=0: serial=115290 error=0 11:39:37 Received message from Master: op=Filter serial=115291 11:39:37 Color wheel filter change from 0 to 0 11:39:37 FLIGetFilterPos err=0 currentPosition=0 11:39:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:37 Filter is already there-color wheel unchanged 11:39:38 Received message from Master: op=Shutter serial=115292 11:39:38 Shutter LASER close 11:39:38 Received message from Camera: op=State serial=115294 11:39:38 GetSingleValue result=40 Value=cccccccc 11:39:38 SkyScan query 11:39:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:39:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:38 Parameters OK 11:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:38 Set A/D data flow result=40 11:39:38 Set A/D channel type result=40 11:39:38 Set A/D encoding result=40 11:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:38 Set channel filter=0.000000e+000 result=40 11:39:38 Config A/D Result=40 11:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:38 Get A/D filter: -9.255963e+061 result=40 11:39:38 Get A/D value=-858993460 result=40 11:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:38 Parameters OK 11:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:38 Set A/D data flow result=40 11:39:38 Set A/D channel type result=40 11:39:38 Set A/D encoding result=40 11:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:38 Set channel filter=0.000000e+000 result=40 11:39:38 Config A/D Result=40 11:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:38 Get A/D filter: -9.255963e+061 result=40 11:39:38 Get A/D value=-858993460 result=40 11:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:38 Aux= 11:39:38 Message to Camera, serial 115294 queued 11:40:15 Received message from Master: op=PointingHead serial=115307 11:40:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:40:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:40:15 Point started: ret=0 11:40:15 point_skyscan result=0 11:40:16 Check angles 11:40:16 SkyScan query 11:40:17 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.76<-16584 Statuses=0009 0009 11:40:17 Msec=0 True Az=64.245 Ze=-68.76 Az status=0009 Ze status=0009 11:40:17 Check angles 11:40:17 SkyScan query 11:40:17 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.715<-17981 Statuses=0009 0009 11:40:17 Msec=750 True Az=81.795 Ze=-89.715 Az status=0009 Ze status=0009 11:40:18 Check angles 11:40:18 SkyScan query 11:40:18 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.67<-19378 Statuses=0009 0009 11:40:18 Msec=1500 True Az=99.225 Ze=-110.67 Az status=0009 Ze status=0009 11:40:18 Check angles 11:40:18 SkyScan query 11:40:19 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.985<-20799 Statuses=0009 0009 11:40:19 Msec=2250 True Az=117.09 Ze=-131.985 Az status=0009 Ze status=0009 11:40:19 Check angles 11:40:19 SkyScan query 11:40:20 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 11:40:20 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 11:40:20 Check angles 11:40:20 SkyScan query 11:40:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:40:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:40:20 Message to Master queued w/err=0: serial=115307 error=0 11:40:25 Received message from Master: op=Filter serial=115308 11:40:25 Color wheel filter change from 0 to 0 11:40:25 FLIGetFilterPos err=0 currentPosition=0 11:40:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:25 Filter is already there-color wheel unchanged 11:40:26 Received message from Master: op=Shutter serial=115309 11:40:26 Shutter LASER close 11:40:26 Received message from Camera: op=State serial=115311 11:40:26 GetSingleValue result=40 Value=cccccccc 11:40:26 SkyScan query 11:40:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:40:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:26 Parameters OK 11:40:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:26 Set A/D data flow result=40 11:40:26 Set A/D channel type result=40 11:40:26 Set A/D encoding result=40 11:40:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:26 Set channel filter=0.000000e+000 result=40 11:40:26 Config A/D Result=40 11:40:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:26 Get A/D filter: -9.255963e+061 result=40 11:40:26 Get A/D value=-858993460 result=40 11:40:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:26 Parameters OK 11:40:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:26 Set A/D data flow result=40 11:40:26 Set A/D channel type result=40 11:40:26 Set A/D encoding result=40 11:40:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:26 Set channel filter=0.000000e+000 result=40 11:40:26 Config A/D Result=40 11:40:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:26 Get A/D filter: -9.255963e+061 result=40 11:40:26 Get A/D value=-858993460 result=40 11:40:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:26 Aux= 11:40:26 Message to Camera, serial 115311 queued 11:41:03 Received message from Master: op=PointingHead serial=115324 11:41:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:41:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:41:03 Point started: ret=0 11:41:03 point_skyscan result=0 11:41:04 Check angles 11:41:04 SkyScan query 11:41:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 11:41:05 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 11:41:05 Check angles 11:41:05 SkyScan query 11:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:41:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:41:06 Message to Master queued w/err=0: serial=115324 error=0 11:41:11 Received message from Master: op=Filter serial=115325 11:41:11 Color wheel filter change from 0 to 0 11:41:11 FLIGetFilterPos err=0 currentPosition=0 11:41:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:11 Filter is already there-color wheel unchanged 11:41:11 Received message from Master: op=Shutter serial=115326 11:41:11 Shutter LASER open 11:41:11 Received message from Camera: op=State serial=115328 11:41:11 GetSingleValue result=40 Value=cccccccc 11:41:11 SkyScan query 11:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:41:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:11 Parameters OK 11:41:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:11 Set A/D data flow result=40 11:41:11 Set A/D channel type result=40 11:41:11 Set A/D encoding result=40 11:41:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:11 Set channel filter=0.000000e+000 result=40 11:41:11 Config A/D Result=40 11:41:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:11 Get A/D filter: -9.255963e+061 result=40 11:41:11 Get A/D value=-858993460 result=40 11:41:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:11 Parameters OK 11:41:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:11 Set A/D data flow result=40 11:41:11 Set A/D channel type result=40 11:41:11 Set A/D encoding result=40 11:41:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:11 Set channel filter=0.000000e+000 result=40 11:41:11 Config A/D Result=40 11:41:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:11 Get A/D filter: -9.255963e+061 result=40 11:41:11 Get A/D value=-858993460 result=40 11:41:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:11 Aux= 11:41:11 Message to Camera, serial 115328 queued 11:41:19 Received message from Master: op=Shutter serial=115337 11:41:19 Shutter LASER close 11:41:20 Received message from Master: op=PointingHead serial=115341 11:41:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:41:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:41:20 Point started: ret=0 11:41:20 point_skyscan result=0 11:41:21 Check angles 11:41:21 SkyScan query 11:41:21 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.025<-21535 Statuses=0009 0009 11:41:21 Msec=0 True Az=136.155 Ze=-143.025 Az status=0009 Ze status=0009 11:41:21 Check angles 11:41:21 SkyScan query 11:41:22 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.665<-20111 Statuses=0009 0009 11:41:22 Msec=750 True Az=154.02 Ze=-121.665 Az status=0009 Ze status=0009 11:41:22 Check angles 11:41:22 SkyScan query 11:41:23 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.65<-18710 Statuses=0009 0009 11:41:23 Msec=1500 True Az=171.48 Ze=-100.65 Az status=0009 Ze status=0009 11:41:23 Check angles 11:41:23 SkyScan query 11:41:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.755<-17317 Statuses=0008 0009 11:41:23 Msec=2250 True Az=176.01 Ze=-79.755 Az status=0008 Ze status=0009 11:41:24 Check angles 11:41:24 SkyScan query 11:41:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.77<-15918 Statuses=0008 0009 11:41:24 Msec=3000 True Az=176.01 Ze=-58.77 Az status=0008 Ze status=0009 11:41:24 Check angles 11:41:24 SkyScan query 11:41:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:41:25 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:41:25 Message to Master queued w/err=0: serial=115341 error=0 11:41:30 Received message from Master: op=Filter serial=115342 11:41:30 Color wheel filter change from 0 to 0 11:41:30 FLIGetFilterPos err=0 currentPosition=0 11:41:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:30 Filter is already there-color wheel unchanged 11:41:30 Received message from Master: op=Shutter serial=115343 11:41:30 Shutter LASER close 11:41:30 Received message from Camera: op=State serial=115345 11:41:30 GetSingleValue result=40 Value=cccccccc 11:41:30 SkyScan query 11:41:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:41:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:31 Parameters OK 11:41:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:31 Set A/D data flow result=40 11:41:31 Set A/D channel type result=40 11:41:31 Set A/D encoding result=40 11:41:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:31 Set channel filter=0.000000e+000 result=40 11:41:31 Config A/D Result=40 11:41:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:31 Get A/D filter: -9.255963e+061 result=40 11:41:31 Get A/D value=-858993460 result=40 11:41:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:31 Parameters OK 11:41:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:31 Set A/D data flow result=40 11:41:31 Set A/D channel type result=40 11:41:31 Set A/D encoding result=40 11:41:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:31 Set channel filter=0.000000e+000 result=40 11:41:31 Config A/D Result=40 11:41:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:31 Get A/D filter: -9.255963e+061 result=40 11:41:31 Get A/D value=-858993460 result=40 11:41:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:31 Aux= 11:41:31 Message to Camera, serial 115345 queued 11:42:08 Received message from Master: op=PointingHead serial=115358 11:42:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:42:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:42:08 Point started: ret=0 11:42:08 point_skyscan result=0 11:42:09 Check angles 11:42:09 SkyScan query 11:42:09 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.255<-13417 Statuses=0009 0009 11:42:09 Msec=0 True Az=152.565 Ze=-21.255 Az status=0009 Ze status=0009 11:42:10 Check angles 11:42:10 SkyScan query 11:42:10 SkyScan query done: ret=0 az=134.58<-8972 ze=0.15<-11990 Statuses=0009 0009 11:42:10 Msec=750 True Az=134.58 Ze=0.15 Az status=0009 Ze status=0009 11:42:10 Check angles 11:42:10 SkyScan query 11:42:11 SkyScan query done: ret=0 az=117.12<-7808 ze=21.105<-10593 Statuses=0009 0009 11:42:11 Msec=1500 True Az=117.12 Ze=21.105 Az status=0009 Ze status=0009 11:42:11 Check angles 11:42:11 SkyScan query 11:42:12 SkyScan query done: ret=0 az=99.84<-6656 ze=42.06<-9196 Statuses=0009 0009 11:42:12 Msec=2250 True Az=99.84 Ze=42.06 Az status=0009 Ze status=0009 11:42:12 Check angles 11:42:12 SkyScan query 11:42:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 11:42:12 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 11:42:13 Check angles 11:42:13 SkyScan query 11:42:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:42:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:42:13 Message to Master queued w/err=0: serial=115358 error=0 11:42:18 Received message from Master: op=Filter serial=115359 11:42:18 Color wheel filter change from 0 to 0 11:42:18 FLIGetFilterPos err=0 currentPosition=0 11:42:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:18 Filter is already there-color wheel unchanged 11:42:18 Received message from Master: op=Shutter serial=115360 11:42:18 Shutter LASER close 11:42:18 Received message from Camera: op=State serial=115362 11:42:18 GetSingleValue result=40 Value=cccccccc 11:42:18 SkyScan query 11:42:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:42:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:19 Parameters OK 11:42:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:19 Set A/D data flow result=40 11:42:19 Set A/D channel type result=40 11:42:19 Set A/D encoding result=40 11:42:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:19 Set channel filter=0.000000e+000 result=40 11:42:19 Config A/D Result=40 11:42:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:19 Get A/D filter: -9.255963e+061 result=40 11:42:19 Get A/D value=-858993460 result=40 11:42:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:19 Parameters OK 11:42:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:19 Set A/D data flow result=40 11:42:19 Set A/D channel type result=40 11:42:19 Set A/D encoding result=40 11:42:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:19 Set channel filter=0.000000e+000 result=40 11:42:19 Config A/D Result=40 11:42:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:19 Get A/D filter: -9.255963e+061 result=40 11:42:19 Get A/D value=-858993460 result=40 11:42:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:19 Aux= 11:42:19 Message to Camera, serial 115362 queued 11:42:56 Received message from Master: op=PointingHead serial=115375 11:42:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:42:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:42:56 Point started: ret=0 11:42:56 point_skyscan result=0 11:42:57 Check angles 11:42:57 SkyScan query 11:42:58 SkyScan query done: ret=0 az=109.095<-7273 ze=38.49<-9434 Statuses=0009 0008 11:42:58 Msec=0 True Az=109.095 Ze=38.49 Az status=0009 Ze status=0008 11:42:58 Check angles 11:42:58 SkyScan query 11:42:58 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 11:42:58 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 11:42:58 Check angles 11:42:58 SkyScan query 11:42:59 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 11:42:59 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 11:42:59 Check angles 11:42:59 SkyScan query 11:43:00 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 11:43:00 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 11:43:00 Check angles 11:43:00 SkyScan query 11:43:01 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:43:01 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:43:01 Check angles 11:43:01 SkyScan query 11:43:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:43:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:43:01 Message to Master queued w/err=0: serial=115375 error=0 11:43:06 Received message from Master: op=Filter serial=115376 11:43:06 Color wheel filter change from 0 to 0 11:43:06 FLIGetFilterPos err=0 currentPosition=0 11:43:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:06 Filter is already there-color wheel unchanged 11:43:06 Received message from Master: op=Shutter serial=115377 11:43:06 Shutter LASER close 11:43:06 Received message from Camera: op=State serial=115379 11:43:06 GetSingleValue result=40 Value=cccccccc 11:43:06 SkyScan query 11:43:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:43:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:07 Parameters OK 11:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:07 Set A/D data flow result=40 11:43:07 Set A/D channel type result=40 11:43:07 Set A/D encoding result=40 11:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:07 Set channel filter=0.000000e+000 result=40 11:43:07 Config A/D Result=40 11:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:07 Get A/D filter: -9.255963e+061 result=40 11:43:07 Get A/D value=-858993460 result=40 11:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:07 Parameters OK 11:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:07 Set A/D data flow result=40 11:43:07 Set A/D channel type result=40 11:43:07 Set A/D encoding result=40 11:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:07 Set channel filter=0.000000e+000 result=40 11:43:07 Config A/D Result=40 11:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:07 Get A/D filter: -9.255963e+061 result=40 11:43:07 Get A/D value=-858993460 result=40 11:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:07 Aux= 11:43:07 Message to Camera, serial 115379 queued 11:43:44 Received message from Master: op=PointingHead serial=115392 11:43:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:43:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:43:44 Point started: ret=0 11:43:44 point_skyscan result=0 11:43:45 Check angles 11:43:45 SkyScan query 11:43:46 SkyScan query done: ret=0 az=152.7<-10180 ze=8.37<-11442 Statuses=0009 0009 11:43:46 Msec=0 True Az=152.7 Ze=8.37 Az status=0009 Ze status=0009 11:43:46 Check angles 11:43:46 SkyScan query 11:43:46 SkyScan query done: ret=0 az=134.745<-8983 ze=-13.08<-12872 Statuses=0009 0009 11:43:46 Msec=750 True Az=134.745 Ze=-13.08 Az status=0009 Ze status=0009 11:43:47 Check angles 11:43:47 SkyScan query 11:43:47 SkyScan query done: ret=0 az=117.33<-7822 ze=-33.99<-14266 Statuses=0009 0009 11:43:47 Msec=1500 True Az=117.33 Ze=-33.99 Az status=0009 Ze status=0009 11:43:47 Check angles 11:43:47 SkyScan query 11:43:48 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.57<-15438 Statuses=0009 0009 11:43:48 Msec=2250 True Az=99.915 Ze=-51.57 Az status=0009 Ze status=0009 11:43:48 Check angles 11:43:48 SkyScan query 11:43:49 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 11:43:49 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 11:43:49 Check angles 11:43:49 SkyScan query 11:43:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:43:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:43:49 Message to Master queued w/err=0: serial=115392 error=0 11:43:54 Received message from Master: op=Filter serial=115393 11:43:54 Color wheel filter change from 0 to 0 11:43:54 FLIGetFilterPos err=0 currentPosition=0 11:43:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:54 Filter is already there-color wheel unchanged 11:43:55 Received message from Master: op=Shutter serial=115394 11:43:55 Shutter LASER close 11:43:55 Received message from Camera: op=State serial=115396 11:43:55 GetSingleValue result=40 Value=cccccccc 11:43:55 SkyScan query 11:43:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:43:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:55 Parameters OK 11:43:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:55 Set A/D data flow result=40 11:43:55 Set A/D channel type result=40 11:43:55 Set A/D encoding result=40 11:43:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:55 Set channel filter=0.000000e+000 result=40 11:43:55 Config A/D Result=40 11:43:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:55 Get A/D filter: -9.255963e+061 result=40 11:43:55 Get A/D value=-858993460 result=40 11:43:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:55 Parameters OK 11:43:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:55 Set A/D data flow result=40 11:43:55 Set A/D channel type result=40 11:43:55 Set A/D encoding result=40 11:43:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:55 Set channel filter=0.000000e+000 result=40 11:43:55 Config A/D Result=40 11:43:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:55 Get A/D filter: -9.255963e+061 result=40 11:43:55 Get A/D value=-858993460 result=40 11:43:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:55 Aux= 11:43:55 Message to Camera, serial 115396 queued 11:44:32 Received message from Master: op=PointingHead serial=115409 11:44:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:44:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:44:32 Point started: ret=0 11:44:32 point_skyscan result=0 11:44:33 Check angles 11:44:33 SkyScan query 11:44:34 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.57<-17438 Statuses=0009 0009 11:44:34 Msec=0 True Az=109.35 Ze=-81.57 Az status=0009 Ze status=0009 11:44:34 Check angles 11:44:34 SkyScan query 11:44:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 11:44:34 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 11:44:35 Check angles 11:44:35 SkyScan query 11:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 11:44:35 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 11:44:35 Check angles 11:44:35 SkyScan query 11:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.42<-21628 Statuses=0008 0009 11:44:36 Msec=2250 True Az=112.995 Ze=-144.42 Az status=0008 Ze status=0009 11:44:36 Check angles 11:44:36 SkyScan query 11:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 11:44:37 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 11:44:37 Check angles 11:44:37 SkyScan query 11:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:44:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:44:37 Message to Master queued w/err=0: serial=115409 error=0 11:44:42 Received message from Master: op=Filter serial=115410 11:44:42 Color wheel filter change from 0 to 0 11:44:42 FLIGetFilterPos err=0 currentPosition=0 11:44:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:42 Filter is already there-color wheel unchanged 11:44:43 Received message from Master: op=Shutter serial=115411 11:44:43 Shutter LASER open 11:44:43 Received message from Camera: op=State serial=115413 11:44:43 GetSingleValue result=40 Value=cccccccc 11:44:43 SkyScan query 11:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:44:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:43 Parameters OK 11:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:43 Set A/D data flow result=40 11:44:43 Set A/D channel type result=40 11:44:43 Set A/D encoding result=40 11:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:43 Set channel filter=0.000000e+000 result=40 11:44:43 Config A/D Result=40 11:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:43 Get A/D filter: -9.255963e+061 result=40 11:44:43 Get A/D value=-858993460 result=40 11:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:43 Parameters OK 11:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:43 Set A/D data flow result=40 11:44:43 Set A/D channel type result=40 11:44:43 Set A/D encoding result=40 11:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:43 Set channel filter=0.000000e+000 result=40 11:44:43 Config A/D Result=40 11:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:43 Get A/D filter: -9.255963e+061 result=40 11:44:43 Get A/D value=-858993460 result=40 11:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:43 Aux= 11:44:43 Message to Camera, serial 115413 queued 11:44:52 Received message from Master: op=Shutter serial=115423 11:44:52 Shutter LASER close 11:44:52 Received message from Master: op=PointingHead serial=115427 11:44:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:44:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:44:53 Point started: ret=0 11:44:53 point_skyscan result=0 11:44:53 Check angles 11:44:53 SkyScan query 11:44:54 SkyScan query done: ret=0 az=89.79<-5986 ze=157.05<-1530 Statuses=0009 0009 11:44:54 Msec=0 True Az=89.79 Ze=157.05 Az status=0009 Ze status=0009 11:44:54 Check angles 11:44:54 SkyScan query 11:44:55 SkyScan query done: ret=0 az=72.285<-4819 ze=136.08<-2928 Statuses=0009 0009 11:44:55 Msec=750 True Az=72.285 Ze=136.08 Az status=0009 Ze status=0009 11:44:55 Check angles 11:44:55 SkyScan query 11:44:55 SkyScan query done: ret=0 az=54.63<-3642 ze=114.675<-4355 Statuses=0009 0009 11:44:55 Msec=1500 True Az=54.63 Ze=114.675 Az status=0009 Ze status=0009 11:44:56 Check angles 11:44:56 SkyScan query 11:44:56 SkyScan query done: ret=0 az=40.95<-2730 ze=93.735<-5751 Statuses=0009 0009 11:44:56 Msec=2250 True Az=40.95 Ze=93.735 Az status=0009 Ze status=0009 11:44:56 Check angles 11:44:56 SkyScan query 11:44:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.75<-7150 Statuses=0008 0009 11:44:57 Msec=3000 True Az=40.995 Ze=72.75 Az status=0008 Ze status=0009 11:44:57 Check angles 11:44:57 SkyScan query 11:44:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 11:44:58 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 11:44:58 Check angles 11:44:58 SkyScan query 11:44:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:44:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:44:58 Message to Master queued w/err=0: serial=115427 error=0 11:45:03 Received message from Master: op=Filter serial=115428 11:45:03 Color wheel filter change from 0 to 0 11:45:03 FLIGetFilterPos err=0 currentPosition=0 11:45:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:03 Filter is already there-color wheel unchanged 11:45:04 Received message from Master: op=Shutter serial=115429 11:45:04 Shutter LASER close 11:45:04 Received message from Camera: op=State serial=115431 11:45:04 GetSingleValue result=40 Value=cccccccc 11:45:04 SkyScan query 11:45:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:45:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:04 Parameters OK 11:45:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:04 Set A/D data flow result=40 11:45:04 Set A/D channel type result=40 11:45:04 Set A/D encoding result=40 11:45:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:04 Set channel filter=0.000000e+000 result=40 11:45:04 Config A/D Result=40 11:45:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:04 Get A/D filter: -9.255963e+061 result=40 11:45:04 Get A/D value=-858993460 result=40 11:45:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:04 Parameters OK 11:45:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:04 Set A/D data flow result=40 11:45:04 Set A/D channel type result=40 11:45:04 Set A/D encoding result=40 11:45:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:04 Set channel filter=0.000000e+000 result=40 11:45:04 Config A/D Result=40 11:45:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:04 Get A/D filter: -9.255963e+061 result=40 11:45:04 Get A/D value=-858993460 result=40 11:45:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:04 Aux= 11:45:04 Message to Camera, serial 115431 queued 11:45:27 Received message from Master: op=Identify serial=115432 11:45:41 Received message from Master: op=PointingHead serial=115447 11:45:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:45:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 [UTC 2018-12-13 11:45:42] 11:45:42 Point started: ret=0 11:45:42 point_skyscan result=0 11:45:42 Check angles 11:45:42 SkyScan query 11:45:43 SkyScan query done: ret=0 az=65.295<-4353 ze=66.555<-7563 Statuses=0009 0008 11:45:43 Msec=0 True Az=65.295 Ze=66.555 Az status=0009 Ze status=0008 11:45:43 Check angles 11:45:43 SkyScan query 11:45:44 SkyScan query done: ret=0 az=83.145<-5543 ze=66.495<-7567 Statuses=0009 0008 11:45:44 Msec=750 True Az=83.145 Ze=66.495 Az status=0009 Ze status=0008 11:45:44 Check angles 11:45:44 SkyScan query 11:45:45 SkyScan query done: ret=0 az=100.665<-6711 ze=66.495<-7567 Statuses=0009 0008 11:45:45 Msec=1500 True Az=100.665 Ze=66.495 Az status=0009 Ze status=0008 11:45:45 Check angles 11:45:45 SkyScan query 11:45:45 SkyScan query done: ret=0 az=118.05<-7870 ze=66.495<-7567 Statuses=0009 0008 11:45:45 Msec=2250 True Az=118.05 Ze=66.495 Az status=0009 Ze status=0008 11:45:45 Check angles 11:45:45 SkyScan query 11:45:46 SkyScan query done: ret=0 az=135.57<-9038 ze=66.495<-7567 Statuses=0009 0008 11:45:46 Msec=3000 True Az=135.57 Ze=66.495 Az status=0009 Ze status=0008 11:45:46 Check angles 11:45:46 SkyScan query 11:45:47 SkyScan query done: ret=0 az=153.075<-10205 ze=66.495<-7567 Statuses=0009 0008 11:45:47 Msec=3750 True Az=153.075 Ze=66.495 Az status=0009 Ze status=0008 11:45:47 Check angles 11:45:47 SkyScan query 11:45:48 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:45:48 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:45:48 Message to Master queued w/err=0: serial=115447 error=0 11:45:53 Received message from Master: op=Filter serial=115448 11:45:53 Color wheel filter change from 0 to 0 11:45:53 FLIGetFilterPos err=0 currentPosition=0 11:45:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:53 Filter is already there-color wheel unchanged 11:45:53 Received message from Master: op=Shutter serial=115449 11:45:53 Shutter LASER close 11:45:53 Received message from Camera: op=State serial=115451 11:45:53 GetSingleValue result=40 Value=cccccccc 11:45:53 SkyScan query 11:45:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:45:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:53 Parameters OK 11:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:53 Set A/D data flow result=40 11:45:53 Set A/D channel type result=40 11:45:53 Set A/D encoding result=40 11:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:53 Set channel filter=0.000000e+000 result=40 11:45:53 Config A/D Result=40 11:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:53 Get A/D filter: -9.255963e+061 result=40 11:45:53 Get A/D value=-858993460 result=40 11:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:53 Parameters OK 11:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:53 Set A/D data flow result=40 11:45:53 Set A/D channel type result=40 11:45:53 Set A/D encoding result=40 11:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:53 Set channel filter=0.000000e+000 result=40 11:45:53 Config A/D Result=40 11:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:53 Get A/D filter: -9.255963e+061 result=40 11:45:53 Get A/D value=-858993460 result=40 11:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:53 Aux= 11:45:53 Message to Camera, serial 115451 queued 11:46:30 Received message from Master: op=PointingHead serial=115464 11:46:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:46:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:46:31 Point started: ret=0 11:46:31 point_skyscan result=0 11:46:31 Check angles 11:46:31 SkyScan query 11:46:32 SkyScan query done: ret=0 az=134.835<-8989 ze=36.57<-9562 Statuses=0009 0009 11:46:32 Msec=0 True Az=134.835 Ze=36.57 Az status=0009 Ze status=0009 11:46:32 Check angles 11:46:32 SkyScan query 11:46:33 SkyScan query done: ret=0 az=116.91<-7794 ze=15.21<-10986 Statuses=0009 0009 11:46:33 Msec=750 True Az=116.91 Ze=15.21 Az status=0009 Ze status=0009 11:46:33 Check angles 11:46:33 SkyScan query 11:46:33 SkyScan query done: ret=0 az=99.615<-6641 ze=-5.85<-12390 Statuses=0009 0009 11:46:33 Msec=1500 True Az=99.615 Ze=-5.85 Az status=0009 Ze status=0009 11:46:34 Check angles 11:46:34 SkyScan query 11:46:34 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.745<-13783 Statuses=0009 0009 11:46:34 Msec=2250 True Az=82.155 Ze=-26.745 Az status=0009 Ze status=0009 11:46:34 Check angles 11:46:34 SkyScan query 11:46:35 SkyScan query done: ret=0 az=64.155<-4277 ze=-38.565<-14571 Statuses=0009 0008 11:46:35 Msec=3000 True Az=64.155 Ze=-38.565 Az status=0009 Ze status=0008 11:46:35 Check angles 11:46:35 SkyScan query 11:46:36 SkyScan query done: ret=0 az=46.755<-3117 ze=-38.535<-14569 Statuses=0009 0008 11:46:36 Msec=3750 True Az=46.755 Ze=-38.535 Az status=0009 Ze status=0008 11:46:36 Check angles 11:46:36 SkyScan query 11:46:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:46:36 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:46:36 Message to Master queued w/err=0: serial=115464 error=0 11:46:41 Received message from Master: op=Filter serial=115465 11:46:41 Color wheel filter change from 0 to 0 11:46:41 FLIGetFilterPos err=0 currentPosition=0 11:46:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:41 Filter is already there-color wheel unchanged 11:46:42 Received message from Master: op=Shutter serial=115466 11:46:42 Shutter LASER close 11:46:42 Received message from Camera: op=State serial=115468 11:46:42 GetSingleValue result=40 Value=cccccccc 11:46:42 SkyScan query 11:46:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:46:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:42 Parameters OK 11:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:42 Set A/D data flow result=40 11:46:42 Set A/D channel type result=40 11:46:42 Set A/D encoding result=40 11:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:42 Set channel filter=0.000000e+000 result=40 11:46:42 Config A/D Result=40 11:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:42 Get A/D filter: -9.255963e+061 result=40 11:46:42 Get A/D value=-858993460 result=40 11:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:42 Parameters OK 11:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:42 Set A/D data flow result=40 11:46:42 Set A/D channel type result=40 11:46:42 Set A/D encoding result=40 11:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:42 Set channel filter=0.000000e+000 result=40 11:46:42 Config A/D Result=40 11:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:42 Get A/D filter: -9.255963e+061 result=40 11:46:42 Get A/D value=-858993460 result=40 11:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:42 Aux= 11:46:42 Message to Camera, serial 115468 queued 11:47:19 Received message from Master: op=PointingHead serial=115481 11:47:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:47:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:47:19 Point started: ret=0 11:47:19 point_skyscan result=0 11:47:20 Check angles 11:47:20 SkyScan query 11:47:21 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.58<-16572 Statuses=0009 0009 11:47:21 Msec=0 True Az=64.245 Ze=-68.58 Az status=0009 Ze status=0009 11:47:21 Check angles 11:47:21 SkyScan query 11:47:21 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.55<-17970 Statuses=0009 0009 11:47:21 Msec=750 True Az=81.855 Ze=-89.55 Az status=0009 Ze status=0009 11:47:22 Check angles 11:47:22 SkyScan query 11:47:22 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.52<-19368 Statuses=0009 0009 11:47:22 Msec=1500 True Az=99.24 Ze=-110.52 Az status=0009 Ze status=0009 11:47:22 Check angles 11:47:22 SkyScan query 11:47:23 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.43<-20762 Statuses=0009 0009 11:47:23 Msec=2250 True Az=116.745 Ze=-131.43 Az status=0009 Ze status=0009 11:47:23 Check angles 11:47:23 SkyScan query 11:47:24 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 11:47:24 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 11:47:24 Check angles 11:47:24 SkyScan query 11:47:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:47:24 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:47:24 Message to Master queued w/err=0: serial=115481 error=0 11:47:29 Received message from Master: op=Filter serial=115482 11:47:29 Color wheel filter change from 0 to 0 11:47:29 FLIGetFilterPos err=0 currentPosition=0 11:47:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:29 Filter is already there-color wheel unchanged 11:47:30 Received message from Master: op=Shutter serial=115483 11:47:30 Shutter LASER close 11:47:30 Received message from Camera: op=State serial=115485 11:47:30 GetSingleValue result=40 Value=cccccccc 11:47:30 SkyScan query 11:47:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:47:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:30 Parameters OK 11:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:30 Set A/D data flow result=40 11:47:30 Set A/D channel type result=40 11:47:30 Set A/D encoding result=40 11:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:30 Set channel filter=0.000000e+000 result=40 11:47:30 Config A/D Result=40 11:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:30 Get A/D filter: -9.255963e+061 result=40 11:47:30 Get A/D value=-858993460 result=40 11:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:30 Parameters OK 11:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:30 Set A/D data flow result=40 11:47:30 Set A/D channel type result=40 11:47:30 Set A/D encoding result=40 11:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:30 Set channel filter=0.000000e+000 result=40 11:47:30 Config A/D Result=40 11:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:30 Get A/D filter: -9.255963e+061 result=40 11:47:30 Get A/D value=-858993460 result=40 11:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:30 Aux= 11:47:30 Message to Camera, serial 115485 queued 11:48:07 Received message from Master: op=PointingHead serial=115498 11:48:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:48:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:48:07 Point started: ret=0 11:48:07 point_skyscan result=0 11:48:08 Check angles 11:48:08 SkyScan query 11:48:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 11:48:09 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 11:48:09 Check angles 11:48:09 SkyScan query 11:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:48:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:48:10 Message to Master queued w/err=0: serial=115498 error=0 11:48:15 Received message from Master: op=Filter serial=115499 11:48:15 Color wheel filter change from 0 to 0 11:48:15 FLIGetFilterPos err=0 currentPosition=0 11:48:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:15 Filter is already there-color wheel unchanged 11:48:15 Received message from Master: op=Shutter serial=115500 11:48:15 Shutter LASER open 11:48:15 Received message from Camera: op=State serial=115502 11:48:15 GetSingleValue result=40 Value=cccccccc 11:48:15 SkyScan query 11:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:48:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:15 Parameters OK 11:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:15 Set A/D data flow result=40 11:48:15 Set A/D channel type result=40 11:48:15 Set A/D encoding result=40 11:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:15 Set channel filter=0.000000e+000 result=40 11:48:15 Config A/D Result=40 11:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:15 Get A/D filter: -9.255963e+061 result=40 11:48:15 Get A/D value=-858993460 result=40 11:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:15 Parameters OK 11:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:15 Set A/D data flow result=40 11:48:15 Set A/D channel type result=40 11:48:15 Set A/D encoding result=40 11:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:15 Set channel filter=0.000000e+000 result=40 11:48:15 Config A/D Result=40 11:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:15 Get A/D filter: -9.255963e+061 result=40 11:48:15 Get A/D value=-858993460 result=40 11:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:15 Aux= 11:48:15 Message to Camera, serial 115502 queued 11:48:24 Received message from Master: op=Shutter serial=115512 11:48:24 Shutter LASER close 11:48:24 Received message from Master: op=PointingHead serial=115516 11:48:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:48:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:48:25 Point started: ret=0 11:48:25 point_skyscan result=0 11:48:26 Check angles 11:48:26 SkyScan query 11:48:26 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.04<-21536 Statuses=0009 0009 11:48:26 Msec=0 True Az=136.155 Ze=-143.04 Az status=0009 Ze status=0009 11:48:26 Check angles 11:48:26 SkyScan query 11:48:27 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.085<-20139 Statuses=0009 0009 11:48:27 Msec=750 True Az=153.6 Ze=-122.085 Az status=0009 Ze status=0009 11:48:27 Check angles 11:48:27 SkyScan query 11:48:28 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.16<-18744 Statuses=0009 0009 11:48:28 Msec=1500 True Az=171.195 Ze=-101.16 Az status=0009 Ze status=0009 11:48:28 Check angles 11:48:28 SkyScan query 11:48:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 11:48:28 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 11:48:29 Check angles 11:48:29 SkyScan query 11:48:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.235<-15949 Statuses=0008 0009 11:48:29 Msec=3000 True Az=176.01 Ze=-59.235 Az status=0008 Ze status=0009 11:48:29 Check angles 11:48:29 SkyScan query 11:48:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:48:30 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:48:30 Message to Master queued w/err=0: serial=115516 error=0 11:48:35 Received message from Master: op=Filter serial=115517 11:48:35 Color wheel filter change from 0 to 0 11:48:35 FLIGetFilterPos err=0 currentPosition=0 11:48:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:35 Filter is already there-color wheel unchanged 11:48:35 Received message from Master: op=Shutter serial=115518 11:48:35 Shutter LASER close 11:48:35 Received message from Camera: op=State serial=115520 11:48:35 GetSingleValue result=40 Value=cccccccc 11:48:35 SkyScan query 11:48:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:48:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:36 Parameters OK 11:48:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:36 Set A/D data flow result=40 11:48:36 Set A/D channel type result=40 11:48:36 Set A/D encoding result=40 11:48:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:36 Set channel filter=0.000000e+000 result=40 11:48:36 Config A/D Result=40 11:48:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:36 Get A/D filter: -9.255963e+061 result=40 11:48:36 Get A/D value=-858993460 result=40 11:48:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:36 Parameters OK 11:48:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:36 Set A/D data flow result=40 11:48:36 Set A/D channel type result=40 11:48:36 Set A/D encoding result=40 11:48:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:36 Set channel filter=0.000000e+000 result=40 11:48:36 Config A/D Result=40 11:48:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:36 Get A/D filter: -9.255963e+061 result=40 11:48:36 Get A/D value=-858993460 result=40 11:48:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:36 Aux= 11:48:36 Message to Camera, serial 115520 queued 11:49:13 Received message from Master: op=PointingHead serial=115533 11:49:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:49:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:49:13 Point started: ret=0 11:49:13 point_skyscan result=0 11:49:14 Check angles 11:49:14 SkyScan query 11:49:14 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.885<-13459 Statuses=0009 0009 11:49:14 Msec=0 True Az=153.165 Ze=-21.885 Az status=0009 Ze status=0009 11:49:14 Check angles 11:49:14 SkyScan query 11:49:15 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.87<-12058 Statuses=0009 0009 11:49:15 Msec=750 True Az=135.72 Ze=-0.87 Az status=0009 Ze status=0009 11:49:15 Check angles 11:49:15 SkyScan query 11:49:16 SkyScan query done: ret=0 az=118.155<-7877 ze=20.055<-10663 Statuses=0009 0009 11:49:16 Msec=1500 True Az=118.155 Ze=20.055 Az status=0009 Ze status=0009 11:49:16 Check angles 11:49:16 SkyScan query 11:49:17 SkyScan query done: ret=0 az=100.77<-6718 ze=41.04<-9264 Statuses=0009 0009 11:49:17 Msec=2250 True Az=100.77 Ze=41.04 Az status=0009 Ze status=0009 11:49:17 Check angles 11:49:17 SkyScan query 11:49:17 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 11:49:17 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 11:49:17 Check angles 11:49:17 SkyScan query 11:49:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:49:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:49:18 Message to Master queued w/err=0: serial=115533 error=0 11:49:23 Received message from Master: op=Filter serial=115534 11:49:23 Color wheel filter change from 0 to 0 11:49:23 FLIGetFilterPos err=0 currentPosition=0 11:49:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:23 Filter is already there-color wheel unchanged 11:49:23 Received message from Master: op=Shutter serial=115535 11:49:23 Shutter LASER close 11:49:23 Received message from Camera: op=State serial=115537 11:49:23 GetSingleValue result=40 Value=cccccccc 11:49:23 SkyScan query 11:49:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:49:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:24 Parameters OK 11:49:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:24 Set A/D data flow result=40 11:49:24 Set A/D channel type result=40 11:49:24 Set A/D encoding result=40 11:49:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:24 Set channel filter=0.000000e+000 result=40 11:49:24 Config A/D Result=40 11:49:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:24 Get A/D filter: -9.255963e+061 result=40 11:49:24 Get A/D value=-858993460 result=40 11:49:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:24 Parameters OK 11:49:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:24 Set A/D data flow result=40 11:49:24 Set A/D channel type result=40 11:49:24 Set A/D encoding result=40 11:49:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:24 Set channel filter=0.000000e+000 result=40 11:49:24 Config A/D Result=40 11:49:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:24 Get A/D filter: -9.255963e+061 result=40 11:49:24 Get A/D value=-858993460 result=40 11:49:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:24 Aux= 11:49:24 Message to Camera, serial 115537 queued 11:50:01 Received message from Master: op=PointingHead serial=115550 11:50:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:50:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:50:01 Point started: ret=0 11:50:01 point_skyscan result=0 11:50:02 Check angles 11:50:02 SkyScan query 11:50:02 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 11:50:02 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 11:50:03 Check angles 11:50:03 SkyScan query 11:50:03 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 11:50:03 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 11:50:03 Check angles 11:50:03 SkyScan query 11:50:04 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 11:50:04 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 11:50:04 Check angles 11:50:04 SkyScan query 11:50:05 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 11:50:05 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 11:50:05 Check angles 11:50:05 SkyScan query 11:50:05 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:50:05 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:50:06 Check angles 11:50:06 SkyScan query 11:50:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:50:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:50:06 Message to Master queued w/err=0: serial=115550 error=0 11:50:11 Received message from Master: op=Filter serial=115551 11:50:11 Color wheel filter change from 0 to 0 11:50:11 FLIGetFilterPos err=0 currentPosition=0 11:50:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:11 Filter is already there-color wheel unchanged 11:50:11 Received message from Master: op=Shutter serial=115552 11:50:11 Shutter LASER close 11:50:11 Received message from Camera: op=State serial=115554 11:50:11 GetSingleValue result=40 Value=cccccccc 11:50:11 SkyScan query 11:50:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:50:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:12 Parameters OK 11:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:12 Set A/D data flow result=40 11:50:12 Set A/D channel type result=40 11:50:12 Set A/D encoding result=40 11:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:12 Set channel filter=0.000000e+000 result=40 11:50:12 Config A/D Result=40 11:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:12 Get A/D filter: -9.255963e+061 result=40 11:50:12 Get A/D value=-858993460 result=40 11:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:12 Parameters OK 11:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:12 Set A/D data flow result=40 11:50:12 Set A/D channel type result=40 11:50:12 Set A/D encoding result=40 11:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:12 Set channel filter=0.000000e+000 result=40 11:50:12 Config A/D Result=40 11:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:12 Get A/D filter: -9.255963e+061 result=40 11:50:12 Get A/D value=-858993460 result=40 11:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:12 Aux= 11:50:12 Message to Camera, serial 115554 queued 11:50:48 Received message from Master: op=PointingHead serial=115566 11:50:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:50:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:50:48 Point started: ret=0 11:50:48 point_skyscan result=0 11:50:49 Check angles 11:50:49 SkyScan query 11:50:49 SkyScan query done: ret=0 az=152.91<-10194 ze=8.505<-11433 Statuses=0009 0009 11:50:49 Msec=0 True Az=152.91 Ze=8.505 Az status=0009 Ze status=0009 11:50:50 Check angles 11:50:50 SkyScan query 11:50:50 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.435<-12829 Statuses=0009 0009 11:50:50 Msec=750 True Az=135.375 Ze=-12.435 Az status=0009 Ze status=0009 11:50:50 Check angles 11:50:50 SkyScan query 11:50:51 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.39<-14226 Statuses=0009 0009 11:50:51 Msec=1500 True Az=117.78 Ze=-33.39 Az status=0009 Ze status=0009 11:50:51 Check angles 11:50:51 SkyScan query 11:50:52 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 11:50:52 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 11:50:52 Check angles 11:50:52 SkyScan query 11:50:52 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:50:52 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:50:53 Check angles 11:50:53 SkyScan query 11:50:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:50:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:50:53 Message to Master queued w/err=0: serial=115566 error=0 11:50:58 Received message from Master: op=Filter serial=115567 11:50:58 Color wheel filter change from 0 to 0 11:50:58 FLIGetFilterPos err=0 currentPosition=0 11:50:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:58 Filter is already there-color wheel unchanged 11:50:58 Received message from Master: op=Shutter serial=115568 11:50:58 Shutter LASER close 11:50:58 Received message from Camera: op=State serial=115570 11:50:58 GetSingleValue result=40 Value=cccccccc 11:50:58 SkyScan query 11:50:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:50:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:59 Parameters OK 11:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:59 Set A/D data flow result=40 11:50:59 Set A/D channel type result=40 11:50:59 Set A/D encoding result=40 11:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:59 Set channel filter=0.000000e+000 result=40 11:50:59 Config A/D Result=40 11:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:59 Get A/D filter: -9.255963e+061 result=40 11:50:59 Get A/D value=-858993460 result=40 11:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:59 Parameters OK 11:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:59 Set A/D data flow result=40 11:50:59 Set A/D channel type result=40 11:50:59 Set A/D encoding result=40 11:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:59 Set channel filter=0.000000e+000 result=40 11:50:59 Config A/D Result=40 11:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:59 Get A/D filter: -9.255963e+061 result=40 11:50:59 Get A/D value=-858993460 result=40 11:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:59 Aux= 11:50:59 Message to Camera, serial 115570 queued 11:51:36 Received message from Master: op=PointingHead serial=115583 11:51:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:51:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:51:36 Point started: ret=0 11:51:36 point_skyscan result=0 11:51:37 Check angles 11:51:37 SkyScan query 11:51:38 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.675<-17445 Statuses=0009 0009 11:51:38 Msec=0 True Az=109.335 Ze=-81.675 Az status=0009 Ze status=0009 11:51:38 Check angles 11:51:38 SkyScan query 11:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.05<-18870 Statuses=0008 0009 11:51:38 Msec=750 True Az=112.995 Ze=-103.05 Az status=0008 Ze status=0009 11:51:38 Check angles 11:51:38 SkyScan query 11:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.99<-20266 Statuses=0008 0009 11:51:39 Msec=1500 True Az=112.995 Ze=-123.99 Az status=0008 Ze status=0009 11:51:39 Check angles 11:51:39 SkyScan query 11:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 11:51:40 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 11:51:40 Check angles 11:51:40 SkyScan query 11:51:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 11:51:41 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 11:51:41 Check angles 11:51:41 SkyScan query 11:51:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:51:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:51:41 Message to Master queued w/err=0: serial=115583 error=0 11:51:46 Received message from Master: op=Filter serial=115584 11:51:46 Color wheel filter change from 0 to 0 11:51:46 FLIGetFilterPos err=0 currentPosition=0 11:51:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:46 Filter is already there-color wheel unchanged 11:51:46 Received message from Master: op=Shutter serial=115585 11:51:46 Shutter LASER open 11:51:47 Received message from Camera: op=State serial=115587 11:51:47 GetSingleValue result=40 Value=cccccccc 11:51:47 SkyScan query 11:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:51:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:47 Parameters OK 11:51:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:47 Set A/D data flow result=40 11:51:47 Set A/D channel type result=40 11:51:47 Set A/D encoding result=40 11:51:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:47 Set channel filter=0.000000e+000 result=40 11:51:47 Config A/D Result=40 11:51:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:47 Get A/D filter: -9.255963e+061 result=40 11:51:47 Get A/D value=-858993460 result=40 11:51:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:47 Parameters OK 11:51:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:47 Set A/D data flow result=40 11:51:47 Set A/D channel type result=40 11:51:47 Set A/D encoding result=40 11:51:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:47 Set channel filter=0.000000e+000 result=40 11:51:47 Config A/D Result=40 11:51:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:47 Get A/D filter: -9.255963e+061 result=40 11:51:47 Get A/D value=-858993460 result=40 11:51:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:47 Aux= 11:51:47 Message to Camera, serial 115587 queued 11:51:56 Received message from Master: op=Shutter serial=115597 11:51:56 Shutter LASER close 11:51:56 Received message from Master: op=PointingHead serial=115601 11:51:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:51:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:51:56 Point started: ret=0 11:51:56 point_skyscan result=0 11:51:57 Check angles 11:51:57 SkyScan query 11:51:58 SkyScan query done: ret=0 az=90.075<-6005 ze=157.485<-1501 Statuses=0009 0009 11:51:58 Msec=0 True Az=90.075 Ze=157.485 Az status=0009 Ze status=0009 11:51:58 Check angles 11:51:58 SkyScan query 11:51:59 SkyScan query done: ret=0 az=72.675<-4845 ze=136.5<-2900 Statuses=0009 0009 11:51:59 Msec=750 True Az=72.675 Ze=136.5 Az status=0009 Ze status=0009 11:51:59 Check angles 11:51:59 SkyScan query 11:51:59 SkyScan query done: ret=0 az=55.17<-3678 ze=115.605<-4293 Statuses=0009 0009 11:51:59 Msec=1500 True Az=55.17 Ze=115.605 Az status=0009 Ze status=0009 11:51:59 Check angles 11:51:59 SkyScan query 11:52:00 SkyScan query done: ret=0 az=40.965<-2731 ze=94.59<-5694 Statuses=0009 0009 11:52:00 Msec=2250 True Az=40.965 Ze=94.59 Az status=0009 Ze status=0009 11:52:00 Check angles 11:52:00 SkyScan query 11:52:01 SkyScan query done: ret=0 az=40.995<-2733 ze=73.68<-7088 Statuses=0008 0009 11:52:01 Msec=3000 True Az=40.995 Ze=73.68 Az status=0008 Ze status=0009 11:52:01 Check angles 11:52:01 SkyScan query 11:52:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.995<-8467 Statuses=0008 0009 11:52:02 Msec=3750 True Az=40.995 Ze=52.995 Az status=0008 Ze status=0009 11:52:02 Check angles 11:52:02 SkyScan query 11:52:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:52:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:52:02 Message to Master queued w/err=0: serial=115601 error=0 11:52:07 Received message from Master: op=Filter serial=115602 11:52:07 Color wheel filter change from 0 to 0 11:52:07 FLIGetFilterPos err=0 currentPosition=0 11:52:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:07 Filter is already there-color wheel unchanged 11:52:07 Received message from Master: op=Shutter serial=115603 11:52:07 Shutter LASER close 11:52:08 Received message from Camera: op=State serial=115605 11:52:08 GetSingleValue result=40 Value=cccccccc 11:52:08 SkyScan query 11:52:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:08 Parameters OK 11:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:08 Set A/D data flow result=40 11:52:08 Set A/D channel type result=40 11:52:08 Set A/D encoding result=40 11:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:08 Set channel filter=0.000000e+000 result=40 11:52:08 Config A/D Result=40 11:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:08 Get A/D filter: -9.255963e+061 result=40 11:52:08 Get A/D value=-858993460 result=40 11:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:08 Parameters OK 11:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:08 Set A/D data flow result=40 11:52:08 Set A/D channel type result=40 11:52:08 Set A/D encoding result=40 11:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:08 Set channel filter=0.000000e+000 result=40 11:52:08 Config A/D Result=40 11:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:08 Get A/D filter: -9.255963e+061 result=40 11:52:08 Get A/D value=-858993460 result=40 11:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:08 Aux= 11:52:08 Message to Camera, serial 115605 queued 11:52:45 Received message from Master: op=PointingHead serial=115618 11:52:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:52:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:52:45 Point started: ret=0 11:52:45 point_skyscan result=0 11:52:46 Check angles 11:52:46 SkyScan query 11:52:47 SkyScan query done: ret=0 az=64.395<-4293 ze=66.555<-7563 Statuses=0009 0008 11:52:47 Msec=0 True Az=64.395 Ze=66.555 Az status=0009 Ze status=0008 11:52:47 Check angles 11:52:47 SkyScan query 11:52:47 SkyScan query done: ret=0 az=81.825<-5455 ze=66.495<-7567 Statuses=0009 0008 11:52:47 Msec=750 True Az=81.825 Ze=66.495 Az status=0009 Ze status=0008 11:52:48 Check angles 11:52:48 SkyScan query 11:52:48 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 11:52:48 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 11:52:48 Check angles 11:52:48 SkyScan query 11:52:49 SkyScan query done: ret=0 az=117.15<-7810 ze=66.495<-7567 Statuses=0009 0008 11:52:49 Msec=2250 True Az=117.15 Ze=66.495 Az status=0009 Ze status=0008 11:52:49 Check angles 11:52:49 SkyScan query 11:52:50 SkyScan query done: ret=0 az=134.67<-8978 ze=66.495<-7567 Statuses=0009 0008 11:52:50 Msec=3000 True Az=134.67 Ze=66.495 Az status=0009 Ze status=0008 11:52:50 Check angles 11:52:50 SkyScan query 11:52:50 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 11:52:50 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 11:52:51 Check angles 11:52:51 SkyScan query 11:52:51 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:52:51 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:52:51 Message to Master queued w/err=0: serial=115618 error=0 11:52:56 Received message from Master: op=Filter serial=115619 11:52:56 Color wheel filter change from 0 to 0 11:52:56 FLIGetFilterPos err=0 currentPosition=0 11:52:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:56 Filter is already there-color wheel unchanged 11:52:56 Received message from Master: op=Shutter serial=115620 11:52:56 Shutter LASER close 11:52:56 Received message from Camera: op=State serial=115622 11:52:56 GetSingleValue result=40 Value=cccccccc 11:52:56 SkyScan query 11:52:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:52:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:57 Parameters OK 11:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:57 Set A/D data flow result=40 11:52:57 Set A/D channel type result=40 11:52:57 Set A/D encoding result=40 11:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:57 Set channel filter=0.000000e+000 result=40 11:52:57 Config A/D Result=40 11:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:57 Get A/D filter: -9.255963e+061 result=40 11:52:57 Get A/D value=-858993460 result=40 11:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:57 Parameters OK 11:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:57 Set A/D data flow result=40 11:52:57 Set A/D channel type result=40 11:52:57 Set A/D encoding result=40 11:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:57 Set channel filter=0.000000e+000 result=40 11:52:57 Config A/D Result=40 11:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:57 Get A/D filter: -9.255963e+061 result=40 11:52:57 Get A/D value=-858993460 result=40 11:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:57 Aux= 11:52:57 Message to Camera, serial 115622 queued 11:53:34 Received message from Master: op=PointingHead serial=115635 11:53:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:53:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:53:34 Point started: ret=0 11:53:34 point_skyscan result=0 11:53:35 Check angles 11:53:35 SkyScan query 11:53:35 SkyScan query done: ret=0 az=135.12<-9008 ze=36.855<-9543 Statuses=0009 0009 11:53:35 Msec=0 True Az=135.12 Ze=36.855 Az status=0009 Ze status=0009 11:53:36 Check angles 11:53:36 SkyScan query 11:53:36 SkyScan query done: ret=0 az=117.645<-7843 ze=15.915<-10939 Statuses=0009 0009 11:53:36 Msec=750 True Az=117.645 Ze=15.915 Az status=0009 Ze status=0009 11:53:36 Check angles 11:53:36 SkyScan query 11:53:37 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.46<-12364 Statuses=0009 0009 11:53:37 Msec=1500 True Az=99.9 Ze=-5.46 Az status=0009 Ze status=0009 11:53:37 Check angles 11:53:37 SkyScan query 11:53:38 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.4<-13760 Statuses=0009 0009 11:53:38 Msec=2250 True Az=82.425 Ze=-26.4 Az status=0009 Ze status=0009 11:53:38 Check angles 11:53:38 SkyScan query 11:53:38 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 11:53:38 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 11:53:39 Check angles 11:53:39 SkyScan query 11:53:39 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 11:53:39 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 11:53:39 Check angles 11:53:39 SkyScan query 11:53:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:53:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:53:40 Message to Master queued w/err=0: serial=115635 error=0 11:53:45 Received message from Master: op=Filter serial=115636 11:53:45 Color wheel filter change from 0 to 0 11:53:45 FLIGetFilterPos err=0 currentPosition=0 11:53:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:45 Filter is already there-color wheel unchanged 11:53:45 Received message from Master: op=Shutter serial=115637 11:53:45 Shutter LASER close 11:53:45 Received message from Camera: op=State serial=115639 11:53:45 GetSingleValue result=40 Value=cccccccc 11:53:45 SkyScan query 11:53:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:53:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:46 Parameters OK 11:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:46 Set A/D data flow result=40 11:53:46 Set A/D channel type result=40 11:53:46 Set A/D encoding result=40 11:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:46 Set channel filter=0.000000e+000 result=40 11:53:46 Config A/D Result=40 11:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:46 Get A/D filter: -9.255963e+061 result=40 11:53:46 Get A/D value=-858993460 result=40 11:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:46 Parameters OK 11:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:46 Set A/D data flow result=40 11:53:46 Set A/D channel type result=40 11:53:46 Set A/D encoding result=40 11:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:46 Set channel filter=0.000000e+000 result=40 11:53:46 Config A/D Result=40 11:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:46 Get A/D filter: -9.255963e+061 result=40 11:53:46 Get A/D value=-858993460 result=40 11:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:46 Aux= 11:53:46 Message to Camera, serial 115639 queued 11:54:23 Received message from Master: op=PointingHead serial=115652 11:54:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:54:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:54:23 Point started: ret=0 11:54:23 point_skyscan result=0 11:54:24 Check angles 11:54:24 SkyScan query 11:54:24 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.19<-16546 Statuses=0009 0009 11:54:24 Msec=0 True Az=63.975 Ze=-68.19 Az status=0009 Ze status=0009 11:54:24 Check angles 11:54:24 SkyScan query 11:54:25 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.205<-17947 Statuses=0009 0009 11:54:25 Msec=750 True Az=81.39 Ze=-89.205 Az status=0009 Ze status=0009 11:54:25 Check angles 11:54:25 SkyScan query 11:54:26 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.13<-19342 Statuses=0009 0009 11:54:26 Msec=1500 True Az=98.82 Ze=-110.13 Az status=0009 Ze status=0009 11:54:26 Check angles 11:54:26 SkyScan query 11:54:27 SkyScan query done: ret=0 az=116.415<-7761 ze=-131.1<-20740 Statuses=0009 0009 11:54:27 Msec=2250 True Az=116.415 Ze=-131.1 Az status=0009 Ze status=0009 11:54:27 Check angles 11:54:27 SkyScan query 11:54:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 11:54:27 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 11:54:27 Check angles 11:54:27 SkyScan query 11:54:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:54:28 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:54:28 Message to Master queued w/err=0: serial=115652 error=0 11:54:33 Received message from Master: op=Filter serial=115653 11:54:33 Color wheel filter change from 0 to 0 11:54:33 FLIGetFilterPos err=0 currentPosition=0 11:54:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:33 Filter is already there-color wheel unchanged 11:54:33 Received message from Master: op=Shutter serial=115654 11:54:33 Shutter LASER close 11:54:33 Received message from Camera: op=State serial=115656 11:54:33 GetSingleValue result=40 Value=cccccccc 11:54:33 SkyScan query 11:54:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:54:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:34 Parameters OK 11:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:34 Set A/D data flow result=40 11:54:34 Set A/D channel type result=40 11:54:34 Set A/D encoding result=40 11:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:34 Set channel filter=0.000000e+000 result=40 11:54:34 Config A/D Result=40 11:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:34 Get A/D filter: -9.255963e+061 result=40 11:54:34 Get A/D value=-858993460 result=40 11:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:34 Parameters OK 11:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:34 Set A/D data flow result=40 11:54:34 Set A/D channel type result=40 11:54:34 Set A/D encoding result=40 11:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:34 Set channel filter=0.000000e+000 result=40 11:54:34 Config A/D Result=40 11:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:34 Get A/D filter: -9.255963e+061 result=40 11:54:34 Get A/D value=-858993460 result=40 11:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:34 Aux= 11:54:34 Message to Camera, serial 115656 queued 11:55:11 Received message from Master: op=PointingHead serial=115669 11:55:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:55:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:55:11 Point started: ret=0 11:55:11 point_skyscan result=0 11:55:12 Check angles 11:55:12 SkyScan query 11:55:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 11:55:12 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 11:55:13 Check angles 11:55:13 SkyScan query 11:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:55:13 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:55:13 Message to Master queued w/err=0: serial=115669 error=0 11:55:18 Received message from Master: op=Filter serial=115670 11:55:18 Color wheel filter change from 0 to 0 11:55:18 FLIGetFilterPos err=0 currentPosition=0 11:55:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:18 Filter is already there-color wheel unchanged 11:55:18 Received message from Master: op=Shutter serial=115671 11:55:18 Shutter LASER open 11:55:18 Received message from Camera: op=State serial=115673 11:55:18 GetSingleValue result=40 Value=cccccccc 11:55:18 SkyScan query 11:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:55:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:19 Parameters OK 11:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:19 Set A/D data flow result=40 11:55:19 Set A/D channel type result=40 11:55:19 Set A/D encoding result=40 11:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:19 Set channel filter=0.000000e+000 result=40 11:55:19 Config A/D Result=40 11:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:19 Get A/D filter: -9.255963e+061 result=40 11:55:19 Get A/D value=-858993460 result=40 11:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:19 Parameters OK 11:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:19 Set A/D data flow result=40 11:55:19 Set A/D channel type result=40 11:55:19 Set A/D encoding result=40 11:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:19 Set channel filter=0.000000e+000 result=40 11:55:19 Config A/D Result=40 11:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:19 Get A/D filter: -9.255963e+061 result=40 11:55:19 Get A/D value=-858993460 result=40 11:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:19 Aux= 11:55:19 Message to Camera, serial 115673 queued 11:55:27 Received message from Master: op=Shutter serial=115682 11:55:27 Shutter LASER close 11:55:27 Received message from Master: op=PointingHead serial=115686 11:55:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:55:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:55:28 Point started: ret=0 11:55:28 point_skyscan result=0 11:55:28 Check angles 11:55:28 SkyScan query 11:55:29 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.445<-21563 Statuses=0009 0009 11:55:29 Msec=0 True Az=135.765 Ze=-143.445 Az status=0009 Ze status=0009 11:55:29 Check angles 11:55:29 SkyScan query 11:55:30 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.46<-20164 Statuses=0009 0009 11:55:30 Msec=750 True Az=153.375 Ze=-122.46 Az status=0009 Ze status=0009 11:55:30 Check angles [UTC 2018-12-13 11:55:30] 11:55:30 SkyScan query 11:55:30 SkyScan query done: ret=0 az=172.23<-11482 ze=-99.765<-18651 Statuses=0009 0009 11:55:30 Msec=1500 True Az=172.23 Ze=-99.765 Az status=0009 Ze status=0009 11:55:31 Check angles 11:55:31 SkyScan query 11:55:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.55<-17370 Statuses=0008 0009 11:55:31 Msec=2250 True Az=176.01 Ze=-80.55 Az status=0008 Ze status=0009 11:55:31 Check angles 11:55:31 SkyScan query 11:55:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.625<-15975 Statuses=0008 0009 11:55:32 Msec=3000 True Az=176.01 Ze=-59.625 Az status=0008 Ze status=0009 11:55:32 Check angles 11:55:32 SkyScan query 11:55:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:55:33 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:55:33 Message to Master queued w/err=0: serial=115686 error=0 11:55:38 Received message from Master: op=Filter serial=115687 11:55:38 Color wheel filter change from 0 to 0 11:55:38 FLIGetFilterPos err=0 currentPosition=0 11:55:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:38 Filter is already there-color wheel unchanged 11:55:38 Received message from Master: op=Shutter serial=115688 11:55:38 Shutter LASER close 11:55:38 Received message from Camera: op=State serial=115690 11:55:38 GetSingleValue result=40 Value=cccccccc 11:55:38 SkyScan query 11:55:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:55:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:39 Parameters OK 11:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:39 Set A/D data flow result=40 11:55:39 Set A/D channel type result=40 11:55:39 Set A/D encoding result=40 11:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:39 Set channel filter=0.000000e+000 result=40 11:55:39 Config A/D Result=40 11:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:39 Get A/D filter: -9.255963e+061 result=40 11:55:39 Get A/D value=-858993460 result=40 11:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:39 Parameters OK 11:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:39 Set A/D data flow result=40 11:55:39 Set A/D channel type result=40 11:55:39 Set A/D encoding result=40 11:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:39 Set channel filter=0.000000e+000 result=40 11:55:39 Config A/D Result=40 11:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:39 Get A/D filter: -9.255963e+061 result=40 11:55:39 Get A/D value=-858993460 result=40 11:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:39 Aux= 11:55:39 Message to Camera, serial 115690 queued [UTC 2018-12-13 11:55:52] 11:56:15 Received message from Master: op=PointingHead serial=115703 11:56:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:56:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:56:16 Point started: ret=0 11:56:16 point_skyscan result=0 11:56:16 Check angles 11:56:16 SkyScan query 11:56:17 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.315<-13421 Statuses=0009 0009 11:56:17 Msec=0 True Az=152.7 Ze=-21.315 Az status=0009 Ze status=0009 11:56:17 Check angles 11:56:17 SkyScan query 11:56:18 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.33<-12022 Statuses=0009 0009 11:56:18 Msec=750 True Az=135.105 Ze=-0.33 Az status=0009 Ze status=0009 11:56:18 Check angles 11:56:18 SkyScan query 11:56:19 SkyScan query done: ret=0 az=117.555<-7837 ze=20.61<-10626 Statuses=0009 0009 11:56:19 Msec=1500 True Az=117.555 Ze=20.61 Az status=0009 Ze status=0009 11:56:19 Check angles 11:56:19 SkyScan query 11:56:19 SkyScan query done: ret=0 az=99.96<-6664 ze=42<-9200 Statuses=0009 0009 11:56:19 Msec=2250 True Az=99.96 Ze=42 Az status=0009 Ze status=0009 11:56:20 Check angles 11:56:20 SkyScan query 11:56:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 11:56:20 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 11:56:20 Check angles 11:56:20 SkyScan query 11:56:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:56:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:56:21 Message to Master queued w/err=0: serial=115703 error=0 11:56:26 Received message from Master: op=Filter serial=115704 11:56:26 Color wheel filter change from 0 to 0 11:56:26 FLIGetFilterPos err=0 currentPosition=0 11:56:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:26 Filter is already there-color wheel unchanged 11:56:26 Received message from Master: op=Shutter serial=115705 11:56:26 Shutter LASER close 11:56:26 Received message from Camera: op=State serial=115707 11:56:26 GetSingleValue result=40 Value=cccccccc 11:56:26 SkyScan query 11:56:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:56:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:27 Parameters OK 11:56:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:27 Set A/D data flow result=40 11:56:27 Set A/D channel type result=40 11:56:27 Set A/D encoding result=40 11:56:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:27 Set channel filter=0.000000e+000 result=40 11:56:27 Config A/D Result=40 11:56:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:27 Get A/D filter: -9.255963e+061 result=40 11:56:27 Get A/D value=-858993460 result=40 11:56:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:27 Parameters OK 11:56:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:27 Set A/D data flow result=40 11:56:27 Set A/D channel type result=40 11:56:27 Set A/D encoding result=40 11:56:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:27 Set channel filter=0.000000e+000 result=40 11:56:27 Config A/D Result=40 11:56:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:27 Get A/D filter: -9.255963e+061 result=40 11:56:27 Get A/D value=-858993460 result=40 11:56:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:27 Aux= 11:56:27 Message to Camera, serial 115707 queued 11:57:03 Received message from Master: op=PointingHead serial=115720 11:57:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:57:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:57:04 Point started: ret=0 11:57:04 point_skyscan result=0 11:57:05 Check angles 11:57:05 SkyScan query 11:57:05 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 11:57:05 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 11:57:05 Check angles 11:57:05 SkyScan query 11:57:06 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 11:57:06 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 11:57:06 Check angles 11:57:06 SkyScan query 11:57:07 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 11:57:07 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 11:57:07 Check angles 11:57:07 SkyScan query 11:57:07 SkyScan query done: ret=0 az=161.25<-10750 ze=38.505<-9433 Statuses=0009 0008 11:57:07 Msec=2250 True Az=161.25 Ze=38.505 Az status=0009 Ze status=0008 11:57:08 Check angles 11:57:08 SkyScan query 11:57:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:57:08 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:57:08 Check angles 11:57:08 SkyScan query 11:57:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:57:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:57:09 Message to Master queued w/err=0: serial=115720 error=0 11:57:14 Received message from Master: op=Filter serial=115721 11:57:14 Color wheel filter change from 0 to 0 11:57:14 FLIGetFilterPos err=0 currentPosition=0 11:57:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:14 Filter is already there-color wheel unchanged 11:57:14 Received message from Master: op=Shutter serial=115722 11:57:14 Shutter LASER close 11:57:14 Received message from Camera: op=State serial=115724 11:57:14 GetSingleValue result=40 Value=cccccccc 11:57:14 SkyScan query 11:57:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:57:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:15 Parameters OK 11:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:15 Set A/D data flow result=40 11:57:15 Set A/D channel type result=40 11:57:15 Set A/D encoding result=40 11:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:15 Set channel filter=0.000000e+000 result=40 11:57:15 Config A/D Result=40 11:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:15 Get A/D filter: -9.255963e+061 result=40 11:57:15 Get A/D value=-858993460 result=40 11:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:15 Parameters OK 11:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:15 Set A/D data flow result=40 11:57:15 Set A/D channel type result=40 11:57:15 Set A/D encoding result=40 11:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:15 Set channel filter=0.000000e+000 result=40 11:57:15 Config A/D Result=40 11:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:15 Get A/D filter: -9.255963e+061 result=40 11:57:15 Get A/D value=-858993460 result=40 11:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:15 Aux= 11:57:15 Message to Camera, serial 115724 queued 11:57:52 Received message from Master: op=PointingHead serial=115737 11:57:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:57:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:57:52 Point started: ret=0 11:57:52 point_skyscan result=0 11:57:53 Check angles 11:57:53 SkyScan query 11:57:53 SkyScan query done: ret=0 az=152.76<-10184 ze=8.325<-11445 Statuses=0009 0009 11:57:53 Msec=0 True Az=152.76 Ze=8.325 Az status=0009 Ze status=0009 11:57:53 Check angles 11:57:53 SkyScan query 11:57:54 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.585<-12839 Statuses=0009 0009 11:57:54 Msec=750 True Az=135.27 Ze=-12.585 Az status=0009 Ze status=0009 11:57:54 Check angles 11:57:54 SkyScan query 11:57:55 SkyScan query done: ret=0 az=117.39<-7826 ze=-34.05<-14270 Statuses=0009 0009 11:57:55 Msec=1500 True Az=117.39 Ze=-34.05 Az status=0009 Ze status=0009 11:57:55 Check angles 11:57:55 SkyScan query 11:57:55 SkyScan query done: ret=0 az=100.005<-6667 ze=-51.57<-15438 Statuses=0009 0009 11:57:55 Msec=2250 True Az=100.005 Ze=-51.57 Az status=0009 Ze status=0009 11:57:56 Check angles 11:57:56 SkyScan query 11:57:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 11:57:56 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 11:57:56 Check angles 11:57:56 SkyScan query 11:57:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:57:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:57:57 Message to Master queued w/err=0: serial=115737 error=0 11:58:02 Received message from Master: op=Filter serial=115738 11:58:02 Color wheel filter change from 0 to 0 11:58:02 FLIGetFilterPos err=0 currentPosition=0 11:58:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:02 Filter is already there-color wheel unchanged 11:58:02 Received message from Master: op=Shutter serial=115739 11:58:02 Shutter LASER close 11:58:02 Received message from Camera: op=State serial=115741 11:58:02 GetSingleValue result=40 Value=cccccccc 11:58:02 SkyScan query 11:58:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:58:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:03 Parameters OK 11:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:03 Set A/D data flow result=40 11:58:03 Set A/D channel type result=40 11:58:03 Set A/D encoding result=40 11:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:03 Set channel filter=0.000000e+000 result=40 11:58:03 Config A/D Result=40 11:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:03 Get A/D filter: -9.255963e+061 result=40 11:58:03 Get A/D value=-858993460 result=40 11:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:03 Parameters OK 11:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:03 Set A/D data flow result=40 11:58:03 Set A/D channel type result=40 11:58:03 Set A/D encoding result=40 11:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:03 Set channel filter=0.000000e+000 result=40 11:58:03 Config A/D Result=40 11:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:03 Get A/D filter: -9.255963e+061 result=40 11:58:03 Get A/D value=-858993460 result=40 11:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:03 Aux= 11:58:03 Message to Camera, serial 115741 queued 11:58:39 Received message from Master: op=PointingHead serial=115753 11:58:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:58:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:58:39 Point started: ret=0 11:58:39 point_skyscan result=0 11:58:40 Check angles 11:58:40 SkyScan query 11:58:41 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.255<-17417 Statuses=0009 0009 11:58:41 Msec=0 True Az=109.14 Ze=-81.255 Az status=0009 Ze status=0009 11:58:41 Check angles 11:58:41 SkyScan query 11:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 11:58:41 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 11:58:42 Check angles 11:58:42 SkyScan query 11:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 11:58:42 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 11:58:42 Check angles 11:58:42 SkyScan query 11:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 11:58:43 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 11:58:43 Check angles 11:58:43 SkyScan query 11:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 11:58:44 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 11:58:44 Check angles 11:58:44 SkyScan query 11:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:58:44 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:58:44 Message to Master queued w/err=0: serial=115753 error=0 11:58:49 Received message from Master: op=Filter serial=115754 11:58:49 Color wheel filter change from 0 to 0 11:58:49 FLIGetFilterPos err=0 currentPosition=0 11:58:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:49 Filter is already there-color wheel unchanged 11:58:50 Received message from Master: op=Shutter serial=115755 11:58:50 Shutter LASER open 11:58:50 Received message from Camera: op=State serial=115757 11:58:50 GetSingleValue result=40 Value=cccccccc 11:58:50 SkyScan query 11:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:58:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:50 Parameters OK 11:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:50 Set A/D data flow result=40 11:58:50 Set A/D channel type result=40 11:58:50 Set A/D encoding result=40 11:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:50 Set channel filter=0.000000e+000 result=40 11:58:50 Config A/D Result=40 11:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:50 Get A/D filter: -9.255963e+061 result=40 11:58:50 Get A/D value=-858993460 result=40 11:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:50 Parameters OK 11:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:50 Set A/D data flow result=40 11:58:50 Set A/D channel type result=40 11:58:50 Set A/D encoding result=40 11:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:50 Set channel filter=0.000000e+000 result=40 11:58:50 Config A/D Result=40 11:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:50 Get A/D filter: -9.255963e+061 result=40 11:58:50 Get A/D value=-858993460 result=40 11:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:50 Aux= 11:58:50 Message to Camera, serial 115757 queued 11:58:59 Received message from Master: op=Shutter serial=115767 11:58:59 Shutter LASER close 11:58:59 Received message from Master: op=PointingHead serial=115771 11:58:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:58:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:58:59 Point started: ret=0 11:58:59 point_skyscan result=0 11:59:00 Check angles 11:59:00 SkyScan query 11:59:01 SkyScan query done: ret=0 az=89.64<-5976 ze=156.96<-1536 Statuses=0009 0009 11:59:01 Msec=0 True Az=89.64 Ze=156.96 Az status=0009 Ze status=0009 11:59:01 Check angles 11:59:01 SkyScan query 11:59:02 SkyScan query done: ret=0 az=72.195<-4813 ze=135.99<-2934 Statuses=0009 0009 11:59:02 Msec=750 True Az=72.195 Ze=135.99 Az status=0009 Ze status=0009 11:59:02 Check angles 11:59:02 SkyScan query 11:59:02 SkyScan query done: ret=0 az=54.84<-3656 ze=115.065<-4329 Statuses=0009 0009 11:59:02 Msec=1500 True Az=54.84 Ze=115.065 Az status=0009 Ze status=0009 11:59:02 Check angles 11:59:02 SkyScan query 11:59:03 SkyScan query done: ret=0 az=40.965<-2731 ze=94.08<-5728 Statuses=0009 0009 11:59:03 Msec=2250 True Az=40.965 Ze=94.08 Az status=0009 Ze status=0009 11:59:03 Check angles 11:59:03 SkyScan query 11:59:04 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 11:59:04 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 11:59:04 Check angles 11:59:04 SkyScan query 11:59:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 11:59:05 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 11:59:05 Check angles 11:59:05 SkyScan query 11:59:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:59:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:59:05 Message to Master queued w/err=0: serial=115771 error=0 11:59:10 Received message from Master: op=Filter serial=115772 11:59:10 Color wheel filter change from 0 to 0 11:59:10 FLIGetFilterPos err=0 currentPosition=0 11:59:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:10 Filter is already there-color wheel unchanged 11:59:11 Received message from Master: op=Shutter serial=115773 11:59:11 Shutter LASER close 11:59:11 Received message from Camera: op=State serial=115775 11:59:11 GetSingleValue result=40 Value=cccccccc 11:59:11 SkyScan query 11:59:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:59:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:11 Parameters OK 11:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:11 Set A/D data flow result=40 11:59:11 Set A/D channel type result=40 11:59:11 Set A/D encoding result=40 11:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:11 Set channel filter=0.000000e+000 result=40 11:59:11 Config A/D Result=40 11:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:11 Get A/D filter: -9.255963e+061 result=40 11:59:11 Get A/D value=-858993460 result=40 11:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:11 Parameters OK 11:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:11 Set A/D data flow result=40 11:59:11 Set A/D channel type result=40 11:59:11 Set A/D encoding result=40 11:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:11 Set channel filter=0.000000e+000 result=40 11:59:11 Config A/D Result=40 11:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:11 Get A/D filter: -9.255963e+061 result=40 11:59:11 Get A/D value=-858993460 result=40 11:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:11 Aux= 11:59:11 Message to Camera, serial 115775 queued 11:59:48 Received message from Master: op=PointingHead serial=115788 11:59:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:59:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:59:48 Point started: ret=0 11:59:48 point_skyscan result=0 11:59:49 Check angles 11:59:49 SkyScan query 11:59:50 SkyScan query done: ret=0 az=63.885<-4259 ze=66.555<-7563 Statuses=0009 0008 11:59:50 Msec=0 True Az=63.885 Ze=66.555 Az status=0009 Ze status=0008 11:59:50 Check angles 11:59:50 SkyScan query 11:59:51 SkyScan query done: ret=0 az=81.48<-5432 ze=66.495<-7567 Statuses=0009 0008 11:59:51 Msec=750 True Az=81.48 Ze=66.495 Az status=0009 Ze status=0008 11:59:51 Check angles 11:59:51 SkyScan query 11:59:51 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 11:59:51 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 11:59:51 Check angles 11:59:51 SkyScan query 11:59:52 SkyScan query done: ret=0 az=116.34<-7756 ze=66.495<-7567 Statuses=0009 0008 11:59:52 Msec=2250 True Az=116.34 Ze=66.495 Az status=0009 Ze status=0008 11:59:52 Check angles 11:59:52 SkyScan query 11:59:53 SkyScan query done: ret=0 az=133.875<-8925 ze=66.495<-7567 Statuses=0009 0008 11:59:53 Msec=3000 True Az=133.875 Ze=66.495 Az status=0009 Ze status=0008 11:59:53 Check angles 11:59:53 SkyScan query 11:59:54 SkyScan query done: ret=0 az=151.215<-10081 ze=66.495<-7567 Statuses=0009 0008 11:59:54 Msec=3750 True Az=151.215 Ze=66.495 Az status=0009 Ze status=0008 11:59:54 Check angles 11:59:54 SkyScan query 11:59:54 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:59:54 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:59:54 Message to Master queued w/err=0: serial=115788 error=0 11:59:59 Received message from Master: op=Filter serial=115789 11:59:59 Color wheel filter change from 0 to 0 11:59:59 FLIGetFilterPos err=0 currentPosition=0 11:59:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:59 Filter is already there-color wheel unchanged 12:00:00 Received message from Master: op=Shutter serial=115790 12:00:00 Shutter LASER close 12:00:00 Received message from Camera: op=State serial=115792 12:00:00 GetSingleValue result=40 Value=cccccccc 12:00:00 SkyScan query 12:00:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:00 Parameters OK 12:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:00 Set A/D data flow result=40 12:00:00 Set A/D channel type result=40 12:00:00 Set A/D encoding result=40 12:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:00 Set channel filter=0.000000e+000 result=40 12:00:00 Config A/D Result=40 12:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:00 Get A/D filter: -9.255963e+061 result=40 12:00:00 Get A/D value=-858993460 result=40 12:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:00 Parameters OK 12:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:00 Set A/D data flow result=40 12:00:00 Set A/D channel type result=40 12:00:00 Set A/D encoding result=40 12:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:00 Set channel filter=0.000000e+000 result=40 12:00:00 Config A/D Result=40 12:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:00 Get A/D filter: -9.255963e+061 result=40 12:00:00 Get A/D value=-858993460 result=40 12:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:00 Aux= 12:00:00 Message to Camera, serial 115792 queued 12:00:37 Received message from Master: op=PointingHead serial=115805 12:00:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:00:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:00:37 Point started: ret=0 12:00:37 point_skyscan result=0 12:00:38 Check angles 12:00:38 SkyScan query 12:00:39 SkyScan query done: ret=0 az=134.745<-8983 ze=36.645<-9557 Statuses=0009 0009 12:00:39 Msec=0 True Az=134.745 Ze=36.645 Az status=0009 Ze status=0009 12:00:39 Check angles 12:00:39 SkyScan query 12:00:39 SkyScan query done: ret=0 az=117.255<-7817 ze=15.705<-10953 Statuses=0009 0009 12:00:39 Msec=750 True Az=117.255 Ze=15.705 Az status=0009 Ze status=0009 12:00:40 Check angles 12:00:40 SkyScan query 12:00:40 SkyScan query done: ret=0 az=99.57<-6638 ze=-5.7<-12380 Statuses=0009 0009 12:00:40 Msec=1500 True Az=99.57 Ze=-5.7 Az status=0009 Ze status=0009 12:00:40 Check angles 12:00:40 SkyScan query 12:00:41 SkyScan query done: ret=0 az=82.095<-5473 ze=-26.655<-13777 Statuses=0009 0009 12:00:41 Msec=2250 True Az=82.095 Ze=-26.655 Az status=0009 Ze status=0009 12:00:41 Check angles 12:00:41 SkyScan query 12:00:42 SkyScan query done: ret=0 az=64.155<-4277 ze=-38.565<-14571 Statuses=0009 0008 12:00:42 Msec=3000 True Az=64.155 Ze=-38.565 Az status=0009 Ze status=0008 12:00:42 Check angles 12:00:42 SkyScan query 12:00:42 SkyScan query done: ret=0 az=46.74<-3116 ze=-38.52<-14568 Statuses=0009 0008 12:00:42 Msec=3750 True Az=46.74 Ze=-38.52 Az status=0009 Ze status=0008 12:00:43 Check angles 12:00:43 SkyScan query 12:00:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:00:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:00:43 Message to Master queued w/err=0: serial=115805 error=0 12:00:48 Received message from Master: op=Filter serial=115806 12:00:48 Color wheel filter change from 0 to 0 12:00:48 FLIGetFilterPos err=0 currentPosition=0 12:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:48 Filter is already there-color wheel unchanged 12:00:48 Received message from Master: op=Shutter serial=115807 12:00:48 Shutter LASER close 12:00:48 Received message from Camera: op=State serial=115809 12:00:48 GetSingleValue result=40 Value=cccccccc 12:00:48 SkyScan query 12:00:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:49 Parameters OK 12:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:49 Set A/D data flow result=40 12:00:49 Set A/D channel type result=40 12:00:49 Set A/D encoding result=40 12:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:49 Set channel filter=0.000000e+000 result=40 12:00:49 Config A/D Result=40 12:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:49 Get A/D filter: -9.255963e+061 result=40 12:00:49 Get A/D value=-858993460 result=40 12:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:49 Parameters OK 12:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:49 Set A/D data flow result=40 12:00:49 Set A/D channel type result=40 12:00:49 Set A/D encoding result=40 12:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:49 Set channel filter=0.000000e+000 result=40 12:00:49 Config A/D Result=40 12:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:49 Get A/D filter: -9.255963e+061 result=40 12:00:49 Get A/D value=-858993460 result=40 12:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:49 Aux= 12:00:49 Message to Camera, serial 115809 queued 12:01:26 Received message from Master: op=PointingHead serial=115822 12:01:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:01:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:01:26 Point started: ret=0 12:01:26 point_skyscan result=0 12:01:27 Check angles 12:01:27 SkyScan query 12:01:27 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.55<-16570 Statuses=0009 0009 12:01:27 Msec=0 True Az=64.2 Ze=-68.55 Az status=0009 Ze status=0009 12:01:28 Check angles 12:01:28 SkyScan query 12:01:28 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.97<-17998 Statuses=0009 0009 12:01:28 Msec=750 True Az=82.08 Ze=-89.97 Az status=0009 Ze status=0009 12:01:28 Check angles 12:01:28 SkyScan query 12:01:29 SkyScan query done: ret=0 az=99.495<-6633 ze=-110.94<-19396 Statuses=0009 0009 12:01:29 Msec=1500 True Az=99.495 Ze=-110.94 Az status=0009 Ze status=0009 12:01:29 Check angles 12:01:29 SkyScan query 12:01:30 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.85<-20790 Statuses=0009 0009 12:01:30 Msec=2250 True Az=117.105 Ze=-131.85 Az status=0009 Ze status=0009 12:01:30 Check angles 12:01:30 SkyScan query 12:01:31 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 12:01:31 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 12:01:31 Check angles 12:01:31 SkyScan query 12:01:31 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:01:31 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:01:31 Message to Master queued w/err=0: serial=115822 error=0 12:01:36 Received message from Master: op=Filter serial=115823 12:01:36 Color wheel filter change from 0 to 0 12:01:36 FLIGetFilterPos err=0 currentPosition=0 12:01:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:36 Filter is already there-color wheel unchanged 12:01:36 Received message from Master: op=Shutter serial=115824 12:01:36 Shutter LASER close 12:01:36 Received message from Camera: op=State serial=115826 12:01:36 GetSingleValue result=40 Value=cccccccc 12:01:36 SkyScan query 12:01:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:01:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:37 Parameters OK 12:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:37 Set A/D data flow result=40 12:01:37 Set A/D channel type result=40 12:01:37 Set A/D encoding result=40 12:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:37 Set channel filter=0.000000e+000 result=40 12:01:37 Config A/D Result=40 12:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:37 Get A/D filter: -9.255963e+061 result=40 12:01:37 Get A/D value=-858993460 result=40 12:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:37 Parameters OK 12:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:37 Set A/D data flow result=40 12:01:37 Set A/D channel type result=40 12:01:37 Set A/D encoding result=40 12:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:37 Set channel filter=0.000000e+000 result=40 12:01:37 Config A/D Result=40 12:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:37 Get A/D filter: -9.255963e+061 result=40 12:01:37 Get A/D value=-858993460 result=40 12:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:37 Aux= 12:01:37 Message to Camera, serial 115826 queued 12:02:14 Received message from Master: op=PointingHead serial=115839 12:02:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:02:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:02:14 Point started: ret=0 12:02:14 point_skyscan result=0 12:02:15 Check angles 12:02:15 SkyScan query 12:02:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 12:02:16 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 12:02:16 Check angles 12:02:16 SkyScan query 12:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:02:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:02:16 Message to Master queued w/err=0: serial=115839 error=0 12:02:21 Received message from Master: op=Filter serial=115840 12:02:21 Color wheel filter change from 0 to 0 12:02:21 FLIGetFilterPos err=0 currentPosition=0 12:02:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:21 Filter is already there-color wheel unchanged 12:02:21 Received message from Master: op=Shutter serial=115841 12:02:21 Shutter LASER open 12:02:22 Received message from Camera: op=State serial=115843 12:02:22 GetSingleValue result=40 Value=cccccccc 12:02:22 SkyScan query 12:02:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:02:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:22 Parameters OK 12:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:22 Set A/D data flow result=40 12:02:22 Set A/D channel type result=40 12:02:22 Set A/D encoding result=40 12:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:22 Set channel filter=0.000000e+000 result=40 12:02:22 Config A/D Result=40 12:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:22 Get A/D filter: -9.255963e+061 result=40 12:02:22 Get A/D value=-858993460 result=40 12:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:22 Parameters OK 12:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:22 Set A/D data flow result=40 12:02:22 Set A/D channel type result=40 12:02:22 Set A/D encoding result=40 12:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:22 Set channel filter=0.000000e+000 result=40 12:02:22 Config A/D Result=40 12:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:22 Get A/D filter: -9.255963e+061 result=40 12:02:22 Get A/D value=-858993460 result=40 12:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:22 Aux= 12:02:22 Message to Camera, serial 115843 queued 12:02:31 Received message from Master: op=Shutter serial=115853 12:02:31 Shutter LASER close 12:02:31 Received message from Master: op=PointingHead serial=115857 12:02:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:02:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:02:32 Point started: ret=0 12:02:32 point_skyscan result=0 12:02:32 Check angles 12:02:32 SkyScan query 12:02:33 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.415<-21561 Statuses=0009 0009 12:02:33 Msec=0 True Az=135.765 Ze=-143.415 Az status=0009 Ze status=0009 12:02:33 Check angles 12:02:33 SkyScan query 12:02:34 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.445<-20163 Statuses=0009 0009 12:02:34 Msec=750 True Az=153.36 Ze=-122.445 Az status=0009 Ze status=0009 12:02:34 Check angles 12:02:34 SkyScan query 12:02:34 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.04<-18736 Statuses=0009 0009 12:02:34 Msec=1500 True Az=171.225 Ze=-101.04 Az status=0009 Ze status=0009 12:02:35 Check angles 12:02:35 SkyScan query 12:02:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.145<-17343 Statuses=0008 0009 12:02:35 Msec=2250 True Az=176.01 Ze=-80.145 Az status=0008 Ze status=0009 12:02:35 Check angles 12:02:35 SkyScan query 12:02:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.695<-15913 Statuses=0008 0009 12:02:36 Msec=3000 True Az=176.01 Ze=-58.695 Az status=0008 Ze status=0009 12:02:36 Check angles 12:02:36 SkyScan query 12:02:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 12:02:37 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 12:02:37 Message to Master queued w/err=0: serial=115857 error=0 12:02:42 Received message from Master: op=Filter serial=115858 12:02:42 Color wheel filter change from 0 to 0 12:02:42 FLIGetFilterPos err=0 currentPosition=0 12:02:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:42 Filter is already there-color wheel unchanged 12:02:42 Received message from Master: op=Shutter serial=115859 12:02:42 Shutter LASER close 12:02:42 Received message from Camera: op=State serial=115861 12:02:42 GetSingleValue result=40 Value=cccccccc 12:02:42 SkyScan query 12:02:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:02:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:43 Parameters OK 12:02:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:43 Set A/D data flow result=40 12:02:43 Set A/D channel type result=40 12:02:43 Set A/D encoding result=40 12:02:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:43 Set channel filter=0.000000e+000 result=40 12:02:43 Config A/D Result=40 12:02:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:43 Get A/D filter: -9.255963e+061 result=40 12:02:43 Get A/D value=-858993460 result=40 12:02:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:43 Parameters OK 12:02:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:43 Set A/D data flow result=40 12:02:43 Set A/D channel type result=40 12:02:43 Set A/D encoding result=40 12:02:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:43 Set channel filter=0.000000e+000 result=40 12:02:43 Config A/D Result=40 12:02:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:43 Get A/D filter: -9.255963e+061 result=40 12:02:43 Get A/D value=-858993460 result=40 12:02:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:43 Aux= 12:02:43 Message to Camera, serial 115861 queued 12:03:19 Received message from Master: op=PointingHead serial=115874 12:03:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:03:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:03:20 Point started: ret=0 12:03:20 point_skyscan result=0 12:03:21 Check angles 12:03:21 SkyScan query 12:03:21 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.645<-13443 Statuses=0009 0009 12:03:21 Msec=0 True Az=152.97 Ze=-21.645 Az status=0009 Ze status=0009 12:03:21 Check angles 12:03:21 SkyScan query 12:03:22 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.66<-12044 Statuses=0009 0009 12:03:22 Msec=750 True Az=135.375 Ze=-0.66 Az status=0009 Ze status=0009 12:03:22 Check angles 12:03:22 SkyScan query 12:03:23 SkyScan query done: ret=0 az=117.945<-7863 ze=20.28<-10648 Statuses=0009 0009 12:03:23 Msec=1500 True Az=117.945 Ze=20.28 Az status=0009 Ze status=0009 12:03:23 Check angles 12:03:23 SkyScan query 12:03:23 SkyScan query done: ret=0 az=100.575<-6705 ze=41.265<-9249 Statuses=0009 0009 12:03:23 Msec=2250 True Az=100.575 Ze=41.265 Az status=0009 Ze status=0009 12:03:24 Check angles 12:03:24 SkyScan query 12:03:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 12:03:24 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 12:03:24 Check angles 12:03:24 SkyScan query 12:03:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:03:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:03:25 Message to Master queued w/err=0: serial=115874 error=0 12:03:30 Received message from Master: op=Filter serial=115875 12:03:30 Color wheel filter change from 0 to 0 12:03:30 FLIGetFilterPos err=0 currentPosition=0 12:03:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:30 Filter is already there-color wheel unchanged 12:03:30 Received message from Master: op=Shutter serial=115876 12:03:30 Shutter LASER close 12:03:30 Received message from Camera: op=State serial=115878 12:03:30 GetSingleValue result=40 Value=cccccccc 12:03:30 SkyScan query 12:03:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:03:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:31 Parameters OK 12:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:31 Set A/D data flow result=40 12:03:31 Set A/D channel type result=40 12:03:31 Set A/D encoding result=40 12:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:31 Set channel filter=0.000000e+000 result=40 12:03:31 Config A/D Result=40 12:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:31 Get A/D filter: -9.255963e+061 result=40 12:03:31 Get A/D value=-858993460 result=40 12:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:31 Parameters OK 12:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:31 Set A/D data flow result=40 12:03:31 Set A/D channel type result=40 12:03:31 Set A/D encoding result=40 12:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:31 Set channel filter=0.000000e+000 result=40 12:03:31 Config A/D Result=40 12:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:31 Get A/D filter: -9.255963e+061 result=40 12:03:31 Get A/D value=-858993460 result=40 12:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:31 Aux= 12:03:31 Message to Camera, serial 115878 queued 12:04:07 Received message from Master: op=PointingHead serial=115891 12:04:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:04:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:04:08 Point started: ret=0 12:04:08 point_skyscan result=0 12:04:09 Check angles 12:04:09 SkyScan query 12:04:09 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 12:04:09 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 12:04:09 Check angles 12:04:09 SkyScan query 12:04:10 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 12:04:10 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 12:04:10 Check angles 12:04:10 SkyScan query 12:04:11 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 12:04:11 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 12:04:11 Check angles 12:04:11 SkyScan query 12:04:11 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 12:04:11 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 12:04:12 Check angles 12:04:12 SkyScan query 12:04:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:04:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:04:12 Check angles 12:04:12 SkyScan query 12:04:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:04:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:04:13 Message to Master queued w/err=0: serial=115891 error=0 12:04:18 Received message from Master: op=Filter serial=115892 12:04:18 Color wheel filter change from 0 to 0 12:04:18 FLIGetFilterPos err=0 currentPosition=0 12:04:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:18 Filter is already there-color wheel unchanged 12:04:18 Received message from Master: op=Shutter serial=115893 12:04:18 Shutter LASER close 12:04:18 Received message from Camera: op=State serial=115895 12:04:18 GetSingleValue result=40 Value=cccccccc 12:04:18 SkyScan query 12:04:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:04:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:19 Parameters OK 12:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:19 Set A/D data flow result=40 12:04:19 Set A/D channel type result=40 12:04:19 Set A/D encoding result=40 12:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:19 Set channel filter=0.000000e+000 result=40 12:04:19 Config A/D Result=40 12:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:19 Get A/D filter: -9.255963e+061 result=40 12:04:19 Get A/D value=-858993460 result=40 12:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:19 Parameters OK 12:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:19 Set A/D data flow result=40 12:04:19 Set A/D channel type result=40 12:04:19 Set A/D encoding result=40 12:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:19 Set channel filter=0.000000e+000 result=40 12:04:19 Config A/D Result=40 12:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:19 Get A/D filter: -9.255963e+061 result=40 12:04:19 Get A/D value=-858993460 result=40 12:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:19 Aux= 12:04:19 Message to Camera, serial 115895 queued 12:04:56 Received message from Master: op=PointingHead serial=115908 12:04:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:04:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:04:56 Point started: ret=0 12:04:56 point_skyscan result=0 12:04:57 Check angles 12:04:57 SkyScan query 12:04:57 SkyScan query done: ret=0 az=152.64<-10176 ze=8.055<-11463 Statuses=0009 0009 12:04:57 Msec=0 True Az=152.64 Ze=8.055 Az status=0009 Ze status=0009 12:04:58 Check angles 12:04:58 SkyScan query 12:04:58 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.765<-12851 Statuses=0009 0009 12:04:58 Msec=750 True Az=135.12 Ze=-12.765 Az status=0009 Ze status=0009 12:04:58 Check angles 12:04:58 SkyScan query 12:04:59 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.75<-14250 Statuses=0009 0009 12:04:59 Msec=1500 True Az=117.57 Ze=-33.75 Az status=0009 Ze status=0009 12:04:59 Check angles 12:04:59 SkyScan query 12:05:00 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.555<-15437 Statuses=0009 0009 12:05:00 Msec=2250 True Az=100.185 Ze=-51.555 Az status=0009 Ze status=0009 12:05:00 Check angles 12:05:00 SkyScan query 12:05:00 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:05:00 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:05:01 Check angles 12:05:01 SkyScan query 12:05:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:05:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:05:01 Message to Master queued w/err=0: serial=115908 error=0 12:05:06 Received message from Master: op=Filter serial=115909 12:05:06 Color wheel filter change from 0 to 0 12:05:06 FLIGetFilterPos err=0 currentPosition=0 12:05:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:06 Filter is already there-color wheel unchanged 12:05:06 Received message from Master: op=Shutter serial=115910 12:05:06 Shutter LASER close 12:05:06 Received message from Camera: op=State serial=115912 12:05:06 GetSingleValue result=40 Value=cccccccc 12:05:06 SkyScan query 12:05:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:05:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:07 Parameters OK 12:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:07 Set A/D data flow result=40 12:05:07 Set A/D channel type result=40 12:05:07 Set A/D encoding result=40 12:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:07 Set channel filter=0.000000e+000 result=40 12:05:07 Config A/D Result=40 12:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:07 Get A/D filter: -9.255963e+061 result=40 12:05:07 Get A/D value=-858993460 result=40 12:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:07 Parameters OK 12:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:07 Set A/D data flow result=40 12:05:07 Set A/D channel type result=40 12:05:07 Set A/D encoding result=40 12:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:07 Set channel filter=0.000000e+000 result=40 12:05:07 Config A/D Result=40 12:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:07 Get A/D filter: -9.255963e+061 result=40 12:05:07 Get A/D value=-858993460 result=40 12:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:07 Aux= 12:05:07 Message to Camera, serial 115912 queued 12:05:44 Received message from Master: op=PointingHead serial=115925 12:05:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:05:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:05:44 Point started: ret=0 12:05:44 point_skyscan result=0 12:05:45 Check angles 12:05:45 SkyScan query 12:05:45 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.15<-17410 Statuses=0009 0009 12:05:45 Msec=0 True Az=108.885 Ze=-81.15 Az status=0009 Ze status=0009 12:05:46 Check angles 12:05:46 SkyScan query 12:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.105<-18807 Statuses=0008 0009 12:05:46 Msec=750 True Az=112.995 Ze=-102.105 Az status=0008 Ze status=0009 12:05:46 Check angles 12:05:46 SkyScan query 12:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 12:05:47 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 12:05:47 Check angles 12:05:47 SkyScan query 12:05:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.87<-21658 Statuses=0008 0009 12:05:48 Msec=2250 True Az=112.995 Ze=-144.87 Az status=0008 Ze status=0009 12:05:48 Check angles 12:05:48 SkyScan query 12:05:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.81<-23054 Statuses=0008 0009 12:05:48 Msec=3000 True Az=112.995 Ze=-165.81 Az status=0008 Ze status=0009 12:05:49 Check angles 12:05:49 SkyScan query 12:05:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:05:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:05:49 Message to Master queued w/err=0: serial=115925 error=0 12:05:54 Received message from Master: op=Filter serial=115926 12:05:54 Color wheel filter change from 0 to 0 12:05:54 FLIGetFilterPos err=0 currentPosition=0 12:05:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:54 Filter is already there-color wheel unchanged 12:05:54 Received message from Master: op=Shutter serial=115927 12:05:54 Shutter LASER open 12:05:55 Received message from Camera: op=State serial=115929 12:05:55 GetSingleValue result=40 Value=cccccccc 12:05:55 SkyScan query 12:05:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:05:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:55 Parameters OK 12:05:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:55 Set A/D data flow result=40 12:05:55 Set A/D channel type result=40 12:05:55 Set A/D encoding result=40 12:05:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:55 Set channel filter=0.000000e+000 result=40 12:05:55 Config A/D Result=40 12:05:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:55 Get A/D filter: -9.255963e+061 result=40 12:05:55 Get A/D value=-858993460 result=40 12:05:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:55 Parameters OK 12:05:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:55 Set A/D data flow result=40 12:05:55 Set A/D channel type result=40 12:05:55 Set A/D encoding result=40 12:05:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:55 Set channel filter=0.000000e+000 result=40 12:05:55 Config A/D Result=40 12:05:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:55 Get A/D filter: -9.255963e+061 result=40 12:05:55 Get A/D value=-858993460 result=40 12:05:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:55 Aux= 12:05:55 Message to Camera, serial 115929 queued 12:06:04 Received message from Master: op=Shutter serial=115939 12:06:04 Shutter LASER close 12:06:04 Received message from Master: op=PointingHead serial=115943 12:06:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:06:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-13 12:06:04] 12:06:04 Point started: ret=0 12:06:04 point_skyscan result=0 12:06:05 Check angles 12:06:05 SkyScan query 12:06:06 SkyScan query done: ret=0 az=88.185<-5879 ze=155.19<-1654 Statuses=0009 0009 12:06:06 Msec=0 True Az=88.185 Ze=155.19 Az status=0009 Ze status=0009 12:06:06 Check angles 12:06:06 SkyScan query 12:06:06 SkyScan query done: ret=0 az=70.74<-4716 ze=134.235<-3051 Statuses=0009 0009 12:06:06 Msec=750 True Az=70.74 Ze=134.235 Az status=0009 Ze status=0009 12:06:07 Check angles 12:06:07 SkyScan query 12:06:07 SkyScan query done: ret=0 az=52.785<-3519 ze=112.815<-4479 Statuses=0009 0009 12:06:07 Msec=1500 True Az=52.785 Ze=112.815 Az status=0009 Ze status=0009 12:06:07 Check angles 12:06:07 SkyScan query 12:06:08 SkyScan query done: ret=0 az=41.01<-2734 ze=91.86<-5876 Statuses=0008 0009 12:06:08 Msec=2250 True Az=41.01 Ze=91.86 Az status=0008 Ze status=0009 12:06:08 Check angles 12:06:08 SkyScan query 12:06:09 SkyScan query done: ret=0 az=40.995<-2733 ze=70.92<-7272 Statuses=0008 0009 12:06:09 Msec=3000 True Az=40.995 Ze=70.92 Az status=0008 Ze status=0009 12:06:09 Check angles 12:06:09 SkyScan query 12:06:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.555<-8563 Statuses=0008 0009 12:06:09 Msec=3750 True Az=40.995 Ze=51.555 Az status=0008 Ze status=0009 12:06:10 Check angles 12:06:10 SkyScan query 12:06:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:06:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:06:10 Message to Master queued w/err=0: serial=115943 error=0 12:06:15 Received message from Master: op=Filter serial=115944 12:06:15 Color wheel filter change from 0 to 0 12:06:15 FLIGetFilterPos err=0 currentPosition=0 12:06:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:15 Filter is already there-color wheel unchanged 12:06:15 Received message from Master: op=Shutter serial=115945 12:06:15 Shutter LASER close 12:06:16 Received message from Camera: op=State serial=115947 12:06:16 GetSingleValue result=40 Value=cccccccc 12:06:16 SkyScan query 12:06:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:06:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:16 Parameters OK 12:06:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:16 Set A/D data flow result=40 12:06:16 Set A/D channel type result=40 12:06:16 Set A/D encoding result=40 12:06:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:16 Set channel filter=0.000000e+000 result=40 12:06:16 Config A/D Result=40 12:06:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:16 Get A/D filter: -9.255963e+061 result=40 12:06:16 Get A/D value=-858993460 result=40 12:06:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:16 Parameters OK 12:06:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:16 Set A/D data flow result=40 12:06:16 Set A/D channel type result=40 12:06:16 Set A/D encoding result=40 12:06:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:16 Set channel filter=0.000000e+000 result=40 12:06:16 Config A/D Result=40 12:06:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:16 Get A/D filter: -9.255963e+061 result=40 12:06:16 Get A/D value=-858993460 result=40 12:06:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:16 Aux= 12:06:16 Message to Camera, serial 115947 queued 12:06:53 Received message from Master: op=PointingHead serial=115960 12:06:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:06:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:06:53 Point started: ret=0 12:06:53 point_skyscan result=0 12:06:54 Check angles 12:06:54 SkyScan query 12:06:55 SkyScan query done: ret=0 az=64.26<-4284 ze=66.555<-7563 Statuses=0009 0008 12:06:55 Msec=0 True Az=64.26 Ze=66.555 Az status=0009 Ze status=0008 12:06:55 Check angles 12:06:55 SkyScan query 12:06:55 SkyScan query done: ret=0 az=82.14<-5476 ze=66.495<-7567 Statuses=0009 0008 12:06:55 Msec=750 True Az=82.14 Ze=66.495 Az status=0009 Ze status=0008 12:06:56 Check angles 12:06:56 SkyScan query 12:06:56 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 12:06:56 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 12:06:56 Check angles 12:06:56 SkyScan query 12:06:57 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 12:06:57 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 12:06:57 Check angles 12:06:57 SkyScan query 12:06:58 SkyScan query done: ret=0 az=135.045<-9003 ze=66.495<-7567 Statuses=0009 0008 12:06:58 Msec=3000 True Az=135.045 Ze=66.495 Az status=0009 Ze status=0008 12:06:58 Check angles 12:06:58 SkyScan query 12:06:58 SkyScan query done: ret=0 az=152.325<-10155 ze=66.495<-7567 Statuses=0009 0008 12:06:58 Msec=3750 True Az=152.325 Ze=66.495 Az status=0009 Ze status=0008 12:06:59 Check angles 12:06:59 SkyScan query 12:06:59 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:06:59 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:06:59 Message to Master queued w/err=0: serial=115960 error=0 12:07:04 Received message from Master: op=Filter serial=115961 12:07:04 Color wheel filter change from 0 to 0 12:07:04 FLIGetFilterPos err=0 currentPosition=0 12:07:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:04 Filter is already there-color wheel unchanged 12:07:04 Received message from Master: op=Shutter serial=115962 12:07:04 Shutter LASER close 12:07:04 Received message from Camera: op=State serial=115964 12:07:04 GetSingleValue result=40 Value=cccccccc 12:07:04 SkyScan query 12:07:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:07:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:05 Parameters OK 12:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:05 Set A/D data flow result=40 12:07:05 Set A/D channel type result=40 12:07:05 Set A/D encoding result=40 12:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:05 Set channel filter=0.000000e+000 result=40 12:07:05 Config A/D Result=40 12:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:05 Get A/D filter: -9.255963e+061 result=40 12:07:05 Get A/D value=-858993460 result=40 12:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:05 Parameters OK 12:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:05 Set A/D data flow result=40 12:07:05 Set A/D channel type result=40 12:07:05 Set A/D encoding result=40 12:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:05 Set channel filter=0.000000e+000 result=40 12:07:05 Config A/D Result=40 12:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:05 Get A/D filter: -9.255963e+061 result=40 12:07:05 Get A/D value=-858993460 result=40 12:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:05 Aux= 12:07:05 Message to Camera, serial 115964 queued 12:07:42 Received message from Master: op=PointingHead serial=115977 12:07:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:07:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:07:42 Point started: ret=0 12:07:42 point_skyscan result=0 12:07:43 Check angles 12:07:43 SkyScan query 12:07:43 SkyScan query done: ret=0 az=134.955<-8997 ze=36.705<-9553 Statuses=0009 0009 12:07:43 Msec=0 True Az=134.955 Ze=36.705 Az status=0009 Ze status=0009 12:07:44 Check angles 12:07:44 SkyScan query 12:07:44 SkyScan query done: ret=0 az=117.495<-7833 ze=15.78<-10948 Statuses=0009 0009 12:07:44 Msec=750 True Az=117.495 Ze=15.78 Az status=0009 Ze status=0009 12:07:44 Check angles 12:07:44 SkyScan query 12:07:45 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.655<-12377 Statuses=0009 0009 12:07:45 Msec=1500 True Az=99.66 Ze=-5.655 Az status=0009 Ze status=0009 12:07:45 Check angles 12:07:45 SkyScan query 12:07:46 SkyScan query done: ret=0 az=82.17<-5478 ze=-26.595<-13773 Statuses=0009 0009 12:07:46 Msec=2250 True Az=82.17 Ze=-26.595 Az status=0009 Ze status=0009 12:07:46 Check angles 12:07:46 SkyScan query 12:07:47 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.58<-14572 Statuses=0009 0008 12:07:47 Msec=3000 True Az=64.755 Ze=-38.58 Az status=0009 Ze status=0008 12:07:47 Check angles 12:07:47 SkyScan query 12:07:47 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 12:07:47 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 12:07:47 Check angles 12:07:47 SkyScan query 12:07:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:07:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:07:48 Message to Master queued w/err=0: serial=115977 error=0 12:07:53 Received message from Master: op=Filter serial=115978 12:07:53 Color wheel filter change from 0 to 0 12:07:53 FLIGetFilterPos err=0 currentPosition=0 12:07:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:53 Filter is already there-color wheel unchanged 12:07:53 Received message from Master: op=Shutter serial=115979 12:07:53 Shutter LASER close 12:07:53 Received message from Camera: op=State serial=115981 12:07:53 GetSingleValue result=40 Value=cccccccc 12:07:53 SkyScan query 12:07:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:07:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:54 Parameters OK 12:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:54 Set A/D data flow result=40 12:07:54 Set A/D channel type result=40 12:07:54 Set A/D encoding result=40 12:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:54 Set channel filter=0.000000e+000 result=40 12:07:54 Config A/D Result=40 12:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:54 Get A/D filter: -9.255963e+061 result=40 12:07:54 Get A/D value=-858993460 result=40 12:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:54 Parameters OK 12:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:54 Set A/D data flow result=40 12:07:54 Set A/D channel type result=40 12:07:54 Set A/D encoding result=40 12:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:54 Set channel filter=0.000000e+000 result=40 12:07:54 Config A/D Result=40 12:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:54 Get A/D filter: -9.255963e+061 result=40 12:07:54 Get A/D value=-858993460 result=40 12:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:54 Aux= 12:07:54 Message to Camera, serial 115981 queued 12:08:31 Received message from Master: op=PointingHead serial=115994 12:08:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:08:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:08:31 Point started: ret=0 12:08:31 point_skyscan result=0 12:08:32 Check angles 12:08:32 SkyScan query 12:08:32 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.34<-16556 Statuses=0009 0009 12:08:32 Msec=0 True Az=63.975 Ze=-68.34 Az status=0009 Ze status=0009 12:08:32 Check angles 12:08:32 SkyScan query 12:08:33 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.295<-17953 Statuses=0009 0009 12:08:33 Msec=750 True Az=81.57 Ze=-89.295 Az status=0009 Ze status=0009 12:08:33 Check angles 12:08:33 SkyScan query 12:08:34 SkyScan query done: ret=0 az=99<-6600 ze=-110.265<-19351 Statuses=0009 0009 12:08:34 Msec=1500 True Az=99 Ze=-110.265 Az status=0009 Ze status=0009 12:08:34 Check angles 12:08:34 SkyScan query 12:08:35 SkyScan query done: ret=0 az=116.43<-7762 ze=-131.22<-20748 Statuses=0009 0009 12:08:35 Msec=2250 True Az=116.43 Ze=-131.22 Az status=0009 Ze status=0009 12:08:35 Check angles 12:08:35 SkyScan query 12:08:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:08:35 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:08:35 Check angles 12:08:35 SkyScan query 12:08:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:08:36 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:08:36 Message to Master queued w/err=0: serial=115994 error=0 12:08:41 Received message from Master: op=Filter serial=115995 12:08:41 Color wheel filter change from 0 to 0 12:08:41 FLIGetFilterPos err=0 currentPosition=0 12:08:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:41 Filter is already there-color wheel unchanged 12:08:41 Received message from Master: op=Shutter serial=115996 12:08:41 Shutter LASER close 12:08:41 Received message from Camera: op=State serial=115998 12:08:41 GetSingleValue result=40 Value=cccccccc 12:08:41 SkyScan query 12:08:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:08:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:42 Parameters OK 12:08:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:42 Set A/D data flow result=40 12:08:42 Set A/D channel type result=40 12:08:42 Set A/D encoding result=40 12:08:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:42 Set channel filter=0.000000e+000 result=40 12:08:42 Config A/D Result=40 12:08:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:42 Get A/D filter: -9.255963e+061 result=40 12:08:42 Get A/D value=-858993460 result=40 12:08:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:42 Parameters OK 12:08:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:42 Set A/D data flow result=40 12:08:42 Set A/D channel type result=40 12:08:42 Set A/D encoding result=40 12:08:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:42 Set channel filter=0.000000e+000 result=40 12:08:42 Config A/D Result=40 12:08:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:42 Get A/D filter: -9.255963e+061 result=40 12:08:42 Get A/D value=-858993460 result=40 12:08:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:42 Aux= 12:08:42 Message to Camera, serial 115998 queued 12:09:19 Received message from Master: op=PointingHead serial=116011 12:09:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:09:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:09:19 Point started: ret=0 12:09:19 point_skyscan result=0 12:09:20 Check angles 12:09:20 SkyScan query 12:09:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.405<-23427 Statuses=0009 0009 12:09:20 Msec=0 True Az=112.995 Ze=-171.405 Az status=0009 Ze status=0009 12:09:21 Check angles 12:09:21 SkyScan query 12:09:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:09:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:09:21 Message to Master queued w/err=0: serial=116011 error=0 12:09:26 Received message from Master: op=Filter serial=116012 12:09:26 Color wheel filter change from 0 to 0 12:09:26 FLIGetFilterPos err=0 currentPosition=0 12:09:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:26 Filter is already there-color wheel unchanged 12:09:26 Received message from Master: op=Shutter serial=116013 12:09:26 Shutter LASER open 12:09:26 Received message from Camera: op=State serial=116015 12:09:26 GetSingleValue result=40 Value=cccccccc 12:09:26 SkyScan query 12:09:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:09:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:27 Parameters OK 12:09:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:27 Set A/D data flow result=40 12:09:27 Set A/D channel type result=40 12:09:27 Set A/D encoding result=40 12:09:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:27 Set channel filter=0.000000e+000 result=40 12:09:27 Config A/D Result=40 12:09:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:27 Get A/D filter: -9.255963e+061 result=40 12:09:27 Get A/D value=-858993460 result=40 12:09:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:27 Parameters OK 12:09:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:27 Set A/D data flow result=40 12:09:27 Set A/D channel type result=40 12:09:27 Set A/D encoding result=40 12:09:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:27 Set channel filter=0.000000e+000 result=40 12:09:27 Config A/D Result=40 12:09:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:27 Get A/D filter: -9.255963e+061 result=40 12:09:27 Get A/D value=-858993460 result=40 12:09:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:27 Aux= 12:09:27 Message to Camera, serial 116015 queued 12:09:35 Received message from Master: op=Shutter serial=116024 12:09:35 Shutter LASER close 12:09:35 Received message from Master: op=PointingHead serial=116028 12:09:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:09:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:09:35 Point started: ret=0 12:09:35 point_skyscan result=0 12:09:36 Check angles 12:09:36 SkyScan query 12:09:37 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.89<-21526 Statuses=0009 0009 12:09:37 Msec=0 True Az=136.215 Ze=-142.89 Az status=0009 Ze status=0009 12:09:37 Check angles 12:09:37 SkyScan query 12:09:38 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.965<-20131 Statuses=0009 0009 12:09:38 Msec=750 True Az=153.69 Ze=-121.965 Az status=0009 Ze status=0009 12:09:38 Check angles 12:09:38 SkyScan query 12:09:38 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.995<-18733 Statuses=0009 0009 12:09:38 Msec=1500 True Az=171.24 Ze=-100.995 Az status=0009 Ze status=0009 12:09:38 Check angles 12:09:38 SkyScan query 12:09:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.055<-17337 Statuses=0008 0009 12:09:39 Msec=2250 True Az=176.01 Ze=-80.055 Az status=0008 Ze status=0009 12:09:39 Check angles 12:09:39 SkyScan query 12:09:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.055<-15937 Statuses=0008 0009 12:09:40 Msec=3000 True Az=176.01 Ze=-59.055 Az status=0008 Ze status=0009 12:09:40 Check angles 12:09:40 SkyScan query 12:09:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:09:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:09:41 Message to Master queued w/err=0: serial=116028 error=0 12:09:46 Received message from Master: op=Filter serial=116029 12:09:46 Color wheel filter change from 0 to 0 12:09:46 FLIGetFilterPos err=0 currentPosition=0 12:09:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:46 Filter is already there-color wheel unchanged 12:09:46 Received message from Master: op=Shutter serial=116030 12:09:46 Shutter LASER close 12:09:46 Received message from Camera: op=State serial=116032 12:09:46 GetSingleValue result=40 Value=cccccccc 12:09:46 SkyScan query 12:09:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:09:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:46 Parameters OK 12:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:46 Set A/D data flow result=40 12:09:46 Set A/D channel type result=40 12:09:46 Set A/D encoding result=40 12:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:46 Set channel filter=0.000000e+000 result=40 12:09:46 Config A/D Result=40 12:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:46 Get A/D filter: -9.255963e+061 result=40 12:09:46 Get A/D value=-858993460 result=40 12:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:46 Parameters OK 12:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:46 Set A/D data flow result=40 12:09:46 Set A/D channel type result=40 12:09:46 Set A/D encoding result=40 12:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:46 Set channel filter=0.000000e+000 result=40 12:09:46 Config A/D Result=40 12:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:46 Get A/D filter: -9.255963e+061 result=40 12:09:46 Get A/D value=-858993460 result=40 12:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:46 Aux= 12:09:46 Message to Camera, serial 116032 queued 12:10:23 Received message from Master: op=PointingHead serial=116045 12:10:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:10:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:10:24 Point started: ret=0 12:10:24 point_skyscan result=0 12:10:24 Check angles 12:10:24 SkyScan query 12:10:25 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.765<-13451 Statuses=0009 0009 12:10:25 Msec=0 True Az=152.97 Ze=-21.765 Az status=0009 Ze status=0009 12:10:25 Check angles 12:10:25 SkyScan query 12:10:26 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.33<-12022 Statuses=0009 0009 12:10:26 Msec=750 True Az=135.135 Ze=-0.33 Az status=0009 Ze status=0009 12:10:26 Check angles 12:10:26 SkyScan query 12:10:26 SkyScan query done: ret=0 az=117.57<-7838 ze=20.625<-10625 Statuses=0009 0009 12:10:26 Msec=1500 True Az=117.57 Ze=20.625 Az status=0009 Ze status=0009 12:10:27 Check angles 12:10:27 SkyScan query 12:10:27 SkyScan query done: ret=0 az=100.17<-6678 ze=41.58<-9228 Statuses=0009 0009 12:10:27 Msec=2250 True Az=100.17 Ze=41.58 Az status=0009 Ze status=0009 12:10:27 Check angles 12:10:27 SkyScan query 12:10:28 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 12:10:28 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 12:10:28 Check angles 12:10:28 SkyScan query 12:10:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:10:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:10:29 Message to Master queued w/err=0: serial=116045 error=0 12:10:34 Received message from Master: op=Filter serial=116046 12:10:34 Color wheel filter change from 0 to 0 12:10:34 FLIGetFilterPos err=0 currentPosition=0 12:10:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:34 Filter is already there-color wheel unchanged 12:10:34 Received message from Master: op=Shutter serial=116047 12:10:34 Shutter LASER close 12:10:34 Received message from Camera: op=State serial=116049 12:10:34 GetSingleValue result=40 Value=cccccccc 12:10:34 SkyScan query 12:10:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:10:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:35 Parameters OK 12:10:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:35 Set A/D data flow result=40 12:10:35 Set A/D channel type result=40 12:10:35 Set A/D encoding result=40 12:10:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:35 Set channel filter=0.000000e+000 result=40 12:10:35 Config A/D Result=40 12:10:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:35 Get A/D filter: -9.255963e+061 result=40 12:10:35 Get A/D value=-858993460 result=40 12:10:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:35 Parameters OK 12:10:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:35 Set A/D data flow result=40 12:10:35 Set A/D channel type result=40 12:10:35 Set A/D encoding result=40 12:10:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:35 Set channel filter=0.000000e+000 result=40 12:10:35 Config A/D Result=40 12:10:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:35 Get A/D filter: -9.255963e+061 result=40 12:10:35 Get A/D value=-858993460 result=40 12:10:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:35 Aux= 12:10:35 Message to Camera, serial 116049 queued 12:11:11 Received message from Master: op=PointingHead serial=116062 12:11:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:11:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:11:12 Point started: ret=0 12:11:12 point_skyscan result=0 12:11:12 Check angles 12:11:12 SkyScan query 12:11:13 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 12:11:13 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 12:11:13 Check angles 12:11:13 SkyScan query 12:11:14 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 12:11:14 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 12:11:14 Check angles 12:11:14 SkyScan query 12:11:15 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 12:11:15 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 12:11:15 Check angles 12:11:15 SkyScan query 12:11:15 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 12:11:15 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 12:11:15 Check angles 12:11:15 SkyScan query 12:11:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:11:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:11:16 Check angles 12:11:16 SkyScan query 12:11:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:11:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:11:17 Message to Master queued w/err=0: serial=116062 error=0 12:11:22 Received message from Master: op=Filter serial=116063 12:11:22 Color wheel filter change from 0 to 0 12:11:22 FLIGetFilterPos err=0 currentPosition=0 12:11:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:22 Filter is already there-color wheel unchanged 12:11:22 Received message from Master: op=Shutter serial=116064 12:11:22 Shutter LASER close 12:11:22 Received message from Camera: op=State serial=116066 12:11:22 GetSingleValue result=40 Value=cccccccc 12:11:22 SkyScan query 12:11:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:11:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:23 Parameters OK 12:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:23 Set A/D data flow result=40 12:11:23 Set A/D channel type result=40 12:11:23 Set A/D encoding result=40 12:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:23 Set channel filter=0.000000e+000 result=40 12:11:23 Config A/D Result=40 12:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:23 Get A/D filter: -9.255963e+061 result=40 12:11:23 Get A/D value=-858993460 result=40 12:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:23 Parameters OK 12:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:23 Set A/D data flow result=40 12:11:23 Set A/D channel type result=40 12:11:23 Set A/D encoding result=40 12:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:23 Set channel filter=0.000000e+000 result=40 12:11:23 Config A/D Result=40 12:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:23 Get A/D filter: -9.255963e+061 result=40 12:11:23 Get A/D value=-858993460 result=40 12:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:23 Aux= 12:11:23 Message to Camera, serial 116066 queued 12:11:58 Received message from Master: op=PointingHead serial=116078 12:11:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:11:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:11:59 Point started: ret=0 12:11:59 point_skyscan result=0 12:12:00 Check angles 12:12:00 SkyScan query 12:12:00 SkyScan query done: ret=0 az=153.165<-10211 ze=8.85<-11410 Statuses=0009 0009 12:12:00 Msec=0 True Az=153.165 Ze=8.85 Az status=0009 Ze status=0009 12:12:00 Check angles 12:12:00 SkyScan query 12:12:01 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.15<-12810 Statuses=0009 0009 12:12:01 Msec=750 True Az=135.705 Ze=-12.15 Az status=0009 Ze status=0009 12:12:01 Check angles 12:12:01 SkyScan query 12:12:02 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.495<-14233 Statuses=0009 0009 12:12:02 Msec=1500 True Az=117.81 Ze=-33.495 Az status=0009 Ze status=0009 12:12:02 Check angles 12:12:02 SkyScan query 12:12:02 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.57<-15438 Statuses=0009 0009 12:12:02 Msec=2250 True Az=100.08 Ze=-51.57 Az status=0009 Ze status=0009 12:12:03 Check angles 12:12:03 SkyScan query 12:12:03 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:12:03 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:12:03 Check angles 12:12:03 SkyScan query 12:12:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:12:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:12:04 Message to Master queued w/err=0: serial=116078 error=0 12:12:09 Received message from Master: op=Filter serial=116079 12:12:09 Color wheel filter change from 0 to 0 12:12:09 FLIGetFilterPos err=0 currentPosition=0 12:12:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:09 Filter is already there-color wheel unchanged 12:12:09 Received message from Master: op=Shutter serial=116080 12:12:09 Shutter LASER close 12:12:09 Received message from Camera: op=State serial=116082 12:12:09 GetSingleValue result=40 Value=cccccccc 12:12:09 SkyScan query 12:12:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:12:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:10 Parameters OK 12:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:10 Set A/D data flow result=40 12:12:10 Set A/D channel type result=40 12:12:10 Set A/D encoding result=40 12:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:10 Set channel filter=0.000000e+000 result=40 12:12:10 Config A/D Result=40 12:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:10 Get A/D filter: -9.255963e+061 result=40 12:12:10 Get A/D value=-858993460 result=40 12:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:10 Parameters OK 12:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:10 Set A/D data flow result=40 12:12:10 Set A/D channel type result=40 12:12:10 Set A/D encoding result=40 12:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:10 Set channel filter=0.000000e+000 result=40 12:12:10 Config A/D Result=40 12:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:10 Get A/D filter: -9.255963e+061 result=40 12:12:10 Get A/D value=-858993460 result=40 12:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:10 Aux= 12:12:10 Message to Camera, serial 116082 queued 12:12:47 Received message from Master: op=PointingHead serial=116095 12:12:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:12:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:12:47 Point started: ret=0 12:12:47 point_skyscan result=0 12:12:48 Check angles 12:12:48 SkyScan query 12:12:48 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.525<-17435 Statuses=0009 0009 12:12:48 Msec=0 True Az=109.17 Ze=-81.525 Az status=0009 Ze status=0009 12:12:48 Check angles 12:12:48 SkyScan query 12:12:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 12:12:49 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 12:12:49 Check angles 12:12:49 SkyScan query 12:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 12:12:50 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 12:12:50 Check angles 12:12:50 SkyScan query 12:12:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 12:12:51 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 12:12:51 Check angles 12:12:51 SkyScan query 12:12:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 12:12:51 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 12:12:51 Check angles 12:12:51 SkyScan query 12:12:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:12:52 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:12:52 Message to Master queued w/err=0: serial=116095 error=0 12:12:57 Received message from Master: op=Filter serial=116096 12:12:57 Color wheel filter change from 0 to 0 12:12:57 FLIGetFilterPos err=0 currentPosition=0 12:12:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:57 Filter is already there-color wheel unchanged 12:12:57 Received message from Master: op=Shutter serial=116097 12:12:57 Shutter LASER open 12:12:57 Received message from Camera: op=State serial=116099 12:12:57 GetSingleValue result=40 Value=cccccccc 12:12:57 SkyScan query 12:12:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:12:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:58 Parameters OK 12:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:58 Set A/D data flow result=40 12:12:58 Set A/D channel type result=40 12:12:58 Set A/D encoding result=40 12:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:58 Set channel filter=0.000000e+000 result=40 12:12:58 Config A/D Result=40 12:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:58 Get A/D filter: -9.255963e+061 result=40 12:12:58 Get A/D value=-858993460 result=40 12:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:58 Parameters OK 12:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:58 Set A/D data flow result=40 12:12:58 Set A/D channel type result=40 12:12:58 Set A/D encoding result=40 12:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:58 Set channel filter=0.000000e+000 result=40 12:12:58 Config A/D Result=40 12:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:58 Get A/D filter: -9.255963e+061 result=40 12:12:58 Get A/D value=-858993460 result=40 12:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:58 Aux= 12:12:58 Message to Camera, serial 116099 queued 12:13:06 Received message from Master: op=Shutter serial=116109 12:13:06 Shutter LASER close 12:13:07 Received message from Master: op=PointingHead serial=116113 12:13:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:13:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:13:07 Point started: ret=0 12:13:07 point_skyscan result=0 12:13:08 Check angles 12:13:08 SkyScan query 12:13:08 SkyScan query done: ret=0 az=89.43<-5962 ze=156.69<-1554 Statuses=0009 0009 12:13:08 Msec=0 True Az=89.43 Ze=156.69 Az status=0009 Ze status=0009 12:13:09 Check angles 12:13:09 SkyScan query 12:13:09 SkyScan query done: ret=0 az=71.94<-4796 ze=135.75<-2950 Statuses=0009 0009 12:13:09 Msec=750 True Az=71.94 Ze=135.75 Az status=0009 Ze status=0009 12:13:09 Check angles 12:13:09 SkyScan query 12:13:10 SkyScan query done: ret=0 az=54.675<-3645 ze=114.78<-4348 Statuses=0009 0009 12:13:10 Msec=1500 True Az=54.675 Ze=114.78 Az status=0009 Ze status=0009 12:13:10 Check angles 12:13:10 SkyScan query 12:13:11 SkyScan query done: ret=0 az=40.95<-2730 ze=93.825<-5745 Statuses=0009 0009 12:13:11 Msec=2250 True Az=40.95 Ze=93.825 Az status=0009 Ze status=0009 12:13:11 Check angles 12:13:11 SkyScan query 12:13:11 SkyScan query done: ret=0 az=40.995<-2733 ze=72.84<-7144 Statuses=0008 0009 12:13:11 Msec=3000 True Az=40.995 Ze=72.84 Az status=0008 Ze status=0009 12:13:12 Check angles 12:13:12 SkyScan query 12:13:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 12:13:12 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 12:13:12 Check angles 12:13:12 SkyScan query 12:13:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:13:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:13:13 Message to Master queued w/err=0: serial=116113 error=0 12:13:18 Received message from Master: op=Filter serial=116114 12:13:18 Color wheel filter change from 0 to 0 12:13:18 FLIGetFilterPos err=0 currentPosition=0 12:13:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:18 Filter is already there-color wheel unchanged 12:13:18 Received message from Master: op=Shutter serial=116115 12:13:18 Shutter LASER close 12:13:18 Received message from Camera: op=State serial=116117 12:13:18 GetSingleValue result=40 Value=cccccccc 12:13:18 SkyScan query 12:13:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:13:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:19 Parameters OK 12:13:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:19 Set A/D data flow result=40 12:13:19 Set A/D channel type result=40 12:13:19 Set A/D encoding result=40 12:13:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:19 Set channel filter=0.000000e+000 result=40 12:13:19 Config A/D Result=40 12:13:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:19 Get A/D filter: -9.255963e+061 result=40 12:13:19 Get A/D value=-858993460 result=40 12:13:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:19 Parameters OK 12:13:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:19 Set A/D data flow result=40 12:13:19 Set A/D channel type result=40 12:13:19 Set A/D encoding result=40 12:13:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:19 Set channel filter=0.000000e+000 result=40 12:13:19 Config A/D Result=40 12:13:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:19 Get A/D filter: -9.255963e+061 result=40 12:13:19 Get A/D value=-858993460 result=40 12:13:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:19 Aux= 12:13:19 Message to Camera, serial 116117 queued 12:13:56 Received message from Master: op=PointingHead serial=116130 12:13:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:13:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:13:56 Point started: ret=0 12:13:56 point_skyscan result=0 12:13:57 Check angles 12:13:57 SkyScan query 12:13:57 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 12:13:57 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 12:13:58 Check angles 12:13:58 SkyScan query 12:13:58 SkyScan query done: ret=0 az=81.45<-5430 ze=66.495<-7567 Statuses=0009 0008 12:13:58 Msec=750 True Az=81.45 Ze=66.495 Az status=0009 Ze status=0008 12:13:58 Check angles 12:13:58 SkyScan query 12:13:59 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 12:13:59 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 12:13:59 Check angles 12:13:59 SkyScan query 12:14:00 SkyScan query done: ret=0 az=116.46<-7764 ze=66.495<-7567 Statuses=0009 0008 12:14:00 Msec=2250 True Az=116.46 Ze=66.495 Az status=0009 Ze status=0008 12:14:00 Check angles 12:14:00 SkyScan query 12:14:00 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 12:14:00 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 12:14:01 Check angles 12:14:01 SkyScan query 12:14:01 SkyScan query done: ret=0 az=151.365<-10091 ze=66.495<-7567 Statuses=0009 0008 12:14:01 Msec=3750 True Az=151.365 Ze=66.495 Az status=0009 Ze status=0008 12:14:01 Check angles 12:14:01 SkyScan query 12:14:02 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:14:02 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:14:02 Message to Master queued w/err=0: serial=116130 error=0 12:14:07 Received message from Master: op=Filter serial=116131 12:14:07 Color wheel filter change from 0 to 0 12:14:07 FLIGetFilterPos err=0 currentPosition=0 12:14:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:07 Filter is already there-color wheel unchanged 12:14:07 Received message from Master: op=Shutter serial=116132 12:14:07 Shutter LASER close 12:14:07 Received message from Camera: op=State serial=116134 12:14:07 GetSingleValue result=40 Value=cccccccc 12:14:07 SkyScan query 12:14:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:14:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:08 Parameters OK 12:14:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:08 Set A/D data flow result=40 12:14:08 Set A/D channel type result=40 12:14:08 Set A/D encoding result=40 12:14:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:08 Set channel filter=0.000000e+000 result=40 12:14:08 Config A/D Result=40 12:14:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:08 Get A/D filter: -9.255963e+061 result=40 12:14:08 Get A/D value=-858993460 result=40 12:14:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:08 Parameters OK 12:14:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:08 Set A/D data flow result=40 12:14:08 Set A/D channel type result=40 12:14:08 Set A/D encoding result=40 12:14:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:08 Set channel filter=0.000000e+000 result=40 12:14:08 Config A/D Result=40 12:14:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:08 Get A/D filter: -9.255963e+061 result=40 12:14:08 Get A/D value=-858993460 result=40 12:14:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:08 Aux= 12:14:08 Message to Camera, serial 116134 queued 12:14:45 Received message from Master: op=PointingHead serial=116147 12:14:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:14:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:14:45 Point started: ret=0 12:14:45 point_skyscan result=0 12:14:46 Check angles 12:14:46 SkyScan query 12:14:46 SkyScan query done: ret=0 az=134.715<-8981 ze=36.435<-9571 Statuses=0009 0009 12:14:46 Msec=0 True Az=134.715 Ze=36.435 Az status=0009 Ze status=0009 12:14:46 Check angles 12:14:46 SkyScan query 12:14:47 SkyScan query done: ret=0 az=117.255<-7817 ze=15.525<-10965 Statuses=0009 0009 12:14:47 Msec=750 True Az=117.255 Ze=15.525 Az status=0009 Ze status=0009 12:14:47 Check angles 12:14:47 SkyScan query 12:14:48 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.475<-12365 Statuses=0009 0009 12:14:48 Msec=1500 True Az=99.825 Ze=-5.475 Az status=0009 Ze status=0009 12:14:48 Check angles 12:14:48 SkyScan query 12:14:49 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.43<-13762 Statuses=0009 0009 12:14:49 Msec=2250 True Az=82.26 Ze=-26.43 Az status=0009 Ze status=0009 12:14:49 Check angles 12:14:49 SkyScan query 12:14:49 SkyScan query done: ret=0 az=64.905<-4327 ze=-38.58<-14572 Statuses=0009 0008 12:14:49 Msec=3000 True Az=64.905 Ze=-38.58 Az status=0009 Ze status=0008 12:14:49 Check angles 12:14:49 SkyScan query 12:14:50 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.52<-14568 Statuses=0009 0008 12:14:50 Msec=3750 True Az=47.415 Ze=-38.52 Az status=0009 Ze status=0008 12:14:50 Check angles 12:14:50 SkyScan query 12:14:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:14:51 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:14:51 Message to Master queued w/err=0: serial=116147 error=0 12:14:56 Received message from Master: op=Filter serial=116148 12:14:56 Color wheel filter change from 0 to 0 12:14:56 FLIGetFilterPos err=0 currentPosition=0 12:14:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:56 Filter is already there-color wheel unchanged 12:14:56 Received message from Master: op=Shutter serial=116149 12:14:56 Shutter LASER close 12:14:56 Received message from Camera: op=State serial=116151 12:14:56 GetSingleValue result=40 Value=cccccccc 12:14:56 SkyScan query 12:14:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:14:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:57 Parameters OK 12:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:57 Set A/D data flow result=40 12:14:57 Set A/D channel type result=40 12:14:57 Set A/D encoding result=40 12:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:57 Set channel filter=0.000000e+000 result=40 12:14:57 Config A/D Result=40 12:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:57 Get A/D filter: -9.255963e+061 result=40 12:14:57 Get A/D value=-858993460 result=40 12:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:57 Parameters OK 12:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:57 Set A/D data flow result=40 12:14:57 Set A/D channel type result=40 12:14:57 Set A/D encoding result=40 12:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:57 Set channel filter=0.000000e+000 result=40 12:14:57 Config A/D Result=40 12:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:57 Get A/D filter: -9.255963e+061 result=40 12:14:57 Get A/D value=-858993460 result=40 12:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:57 Aux= 12:14:57 Message to Camera, serial 116151 queued 12:15:27 Received message from Master: op=Identify serial=116154 12:15:33 Received message from Master: op=PointingHead serial=116167 12:15:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:15:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:15:34 Point started: ret=0 12:15:34 point_skyscan result=0 12:15:34 Check angles 12:15:34 SkyScan query 12:15:35 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.235<-16549 Statuses=0009 0009 12:15:35 Msec=0 True Az=64.05 Ze=-68.235 Az status=0009 Ze status=0009 12:15:35 Check angles 12:15:35 SkyScan query 12:15:36 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.67<-17978 Statuses=0009 0009 12:15:36 Msec=750 True Az=81.885 Ze=-89.67 Az status=0009 Ze status=0009 12:15:36 Check angles 12:15:36 SkyScan query 12:15:37 SkyScan query done: ret=0 az=99.3<-6620 ze=-110.64<-19376 Statuses=0009 0009 12:15:37 Msec=1500 True Az=99.3 Ze=-110.64 Az status=0009 Ze status=0009 12:15:37 Check angles 12:15:37 SkyScan query 12:15:37 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.55<-20770 Statuses=0009 0009 12:15:37 Msec=2250 True Az=116.745 Ze=-131.55 Az status=0009 Ze status=0009 12:15:38 Check angles 12:15:38 SkyScan query 12:15:38 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 12:15:38 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 12:15:38 Check angles 12:15:38 SkyScan query 12:15:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 12:15:39 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 12:15:39 Message to Master queued w/err=0: serial=116167 error=0 12:15:44 Received message from Master: op=Filter serial=116168 12:15:44 Color wheel filter change from 0 to 0 12:15:44 FLIGetFilterPos err=0 currentPosition=0 12:15:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:44 Filter is already there-color wheel unchanged 12:15:44 Received message from Master: op=Shutter serial=116169 12:15:44 Shutter LASER close 12:15:44 Received message from Camera: op=State serial=116171 12:15:44 GetSingleValue result=40 Value=cccccccc 12:15:44 SkyScan query 12:15:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:15:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:45 Parameters OK 12:15:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:45 Set A/D data flow result=40 12:15:45 Set A/D channel type result=40 12:15:45 Set A/D encoding result=40 12:15:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:45 Set channel filter=0.000000e+000 result=40 12:15:45 Config A/D Result=40 12:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:45 Get A/D filter: -9.255963e+061 result=40 12:15:45 Get A/D value=-858993460 result=40 12:15:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:45 Parameters OK 12:15:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:45 Set A/D data flow result=40 12:15:45 Set A/D channel type result=40 12:15:45 Set A/D encoding result=40 12:15:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:45 Set channel filter=0.000000e+000 result=40 12:15:45 Config A/D Result=40 12:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:45 Get A/D filter: -9.255963e+061 result=40 12:15:45 Get A/D value=-858993460 result=40 [UTC 2018-12-13 12:15:45] 12:15:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:45 Aux= 12:15:45 Message to Camera, serial 116171 queued [UTC 2018-12-13 12:15:52] 12:16:22 Received message from Master: op=PointingHead serial=116184 12:16:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:16:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:16:22 Point started: ret=0 12:16:22 point_skyscan result=0 12:16:23 Check angles 12:16:23 SkyScan query 12:16:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 12:16:23 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 12:16:23 Check angles 12:16:23 SkyScan query 12:16:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:16:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:16:24 Message to Master queued w/err=0: serial=116184 error=0 12:16:29 Received message from Master: op=Filter serial=116185 12:16:29 Color wheel filter change from 0 to 0 12:16:29 FLIGetFilterPos err=0 currentPosition=0 12:16:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:29 Filter is already there-color wheel unchanged 12:16:29 Received message from Master: op=Shutter serial=116186 12:16:29 Shutter LASER open 12:16:29 Received message from Camera: op=State serial=116188 12:16:29 GetSingleValue result=40 Value=cccccccc 12:16:29 SkyScan query 12:16:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:16:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:30 Parameters OK 12:16:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:30 Set A/D data flow result=40 12:16:30 Set A/D channel type result=40 12:16:30 Set A/D encoding result=40 12:16:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:30 Set channel filter=0.000000e+000 result=40 12:16:30 Config A/D Result=40 12:16:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:30 Get A/D filter: -9.255963e+061 result=40 12:16:30 Get A/D value=-858993460 result=40 12:16:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:30 Parameters OK 12:16:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:30 Set A/D data flow result=40 12:16:30 Set A/D channel type result=40 12:16:30 Set A/D encoding result=40 12:16:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:30 Set channel filter=0.000000e+000 result=40 12:16:30 Config A/D Result=40 12:16:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:30 Get A/D filter: -9.255963e+061 result=40 12:16:30 Get A/D value=-858993460 result=40 12:16:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:30 Aux= 12:16:30 Message to Camera, serial 116188 queued 12:16:38 Received message from Master: op=Shutter serial=116198 12:16:38 Shutter LASER close 12:16:39 Received message from Master: op=PointingHead serial=116202 12:16:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:16:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:16:39 Point started: ret=0 12:16:39 point_skyscan result=0 12:16:40 Check angles 12:16:40 SkyScan query 12:16:41 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.995<-21533 Statuses=0009 0009 12:16:41 Msec=0 True Az=136.215 Ze=-142.995 Az status=0009 Ze status=0009 12:16:41 Check angles 12:16:41 SkyScan query 12:16:41 SkyScan query done: ret=0 az=153.675<-10245 ze=-122.025<-20135 Statuses=0009 0009 12:16:41 Msec=750 True Az=153.675 Ze=-122.025 Az status=0009 Ze status=0009 12:16:41 Check angles 12:16:41 SkyScan query 12:16:42 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.605<-18707 Statuses=0009 0009 12:16:42 Msec=1500 True Az=171.555 Ze=-100.605 Az status=0009 Ze status=0009 12:16:42 Check angles 12:16:42 SkyScan query 12:16:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.71<-17314 Statuses=0008 0009 12:16:43 Msec=2250 True Az=176.01 Ze=-79.71 Az status=0008 Ze status=0009 12:16:43 Check angles 12:16:43 SkyScan query 12:16:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.725<-15915 Statuses=0008 0009 12:16:44 Msec=3000 True Az=176.01 Ze=-58.725 Az status=0008 Ze status=0009 12:16:44 Check angles 12:16:44 SkyScan query 12:16:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 12:16:44 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 12:16:44 Message to Master queued w/err=0: serial=116202 error=0 12:16:49 Received message from Master: op=Filter serial=116203 12:16:49 Color wheel filter change from 0 to 0 12:16:49 FLIGetFilterPos err=0 currentPosition=0 12:16:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:49 Filter is already there-color wheel unchanged 12:16:50 Received message from Master: op=Shutter serial=116204 12:16:50 Shutter LASER close 12:16:50 Received message from Camera: op=State serial=116206 12:16:50 GetSingleValue result=40 Value=cccccccc 12:16:50 SkyScan query 12:16:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:16:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:50 Parameters OK 12:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:50 Set A/D data flow result=40 12:16:50 Set A/D channel type result=40 12:16:50 Set A/D encoding result=40 12:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:50 Set channel filter=0.000000e+000 result=40 12:16:50 Config A/D Result=40 12:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:50 Get A/D filter: -9.255963e+061 result=40 12:16:50 Get A/D value=-858993460 result=40 12:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:50 Parameters OK 12:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:50 Set A/D data flow result=40 12:16:50 Set A/D channel type result=40 12:16:50 Set A/D encoding result=40 12:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:50 Set channel filter=0.000000e+000 result=40 12:16:50 Config A/D Result=40 12:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:50 Get A/D filter: -9.255963e+061 result=40 12:16:50 Get A/D value=-858993460 result=40 12:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:50 Aux= 12:16:50 Message to Camera, serial 116206 queued 12:17:27 Received message from Master: op=PointingHead serial=116219 12:17:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:17:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:17:27 Point started: ret=0 12:17:27 point_skyscan result=0 12:17:28 Check angles 12:17:28 SkyScan query 12:17:29 SkyScan query done: ret=0 az=152.895<-10193 ze=-21.705<-13447 Statuses=0009 0009 12:17:29 Msec=0 True Az=152.895 Ze=-21.705 Az status=0009 Ze status=0009 12:17:29 Check angles 12:17:29 SkyScan query 12:17:30 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.72<-12048 Statuses=0009 0009 12:17:30 Msec=750 True Az=135.48 Ze=-0.72 Az status=0009 Ze status=0009 12:17:30 Check angles 12:17:30 SkyScan query 12:17:30 SkyScan query done: ret=0 az=117.99<-7866 ze=20.205<-10653 Statuses=0009 0009 12:17:30 Msec=1500 True Az=117.99 Ze=20.205 Az status=0009 Ze status=0009 12:17:30 Check angles 12:17:30 SkyScan query 12:17:31 SkyScan query done: ret=0 az=100.59<-6706 ze=41.19<-9254 Statuses=0009 0009 12:17:31 Msec=2250 True Az=100.59 Ze=41.19 Az status=0009 Ze status=0009 12:17:31 Check angles 12:17:31 SkyScan query 12:17:32 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 12:17:32 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 12:17:32 Check angles 12:17:32 SkyScan query 12:17:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:17:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:17:33 Message to Master queued w/err=0: serial=116219 error=0 12:17:38 Received message from Master: op=Filter serial=116220 12:17:38 Color wheel filter change from 0 to 0 12:17:38 FLIGetFilterPos err=0 currentPosition=0 12:17:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:38 Filter is already there-color wheel unchanged 12:17:38 Received message from Master: op=Shutter serial=116221 12:17:38 Shutter LASER close 12:17:38 Received message from Camera: op=State serial=116223 12:17:38 GetSingleValue result=40 Value=cccccccc 12:17:38 SkyScan query 12:17:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:17:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:38 Parameters OK 12:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:38 Set A/D data flow result=40 12:17:38 Set A/D channel type result=40 12:17:38 Set A/D encoding result=40 12:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:38 Set channel filter=0.000000e+000 result=40 12:17:38 Config A/D Result=40 12:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:38 Get A/D filter: -9.255963e+061 result=40 12:17:38 Get A/D value=-858993460 result=40 12:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:38 Parameters OK 12:17:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:38 Set A/D data flow result=40 12:17:38 Set A/D channel type result=40 12:17:38 Set A/D encoding result=40 12:17:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:38 Set channel filter=0.000000e+000 result=40 12:17:38 Config A/D Result=40 12:17:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:38 Get A/D filter: -9.255963e+061 result=40 12:17:38 Get A/D value=-858993460 result=40 12:17:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:38 Aux= 12:17:38 Message to Camera, serial 116223 queued 12:18:15 Received message from Master: op=PointingHead serial=116236 12:18:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:18:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:18:15 Point started: ret=0 12:18:15 point_skyscan result=0 12:18:16 Check angles 12:18:16 SkyScan query 12:18:17 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 12:18:17 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 12:18:17 Check angles 12:18:17 SkyScan query 12:18:18 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 12:18:18 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 12:18:18 Check angles 12:18:18 SkyScan query 12:18:18 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 12:18:18 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 12:18:18 Check angles 12:18:18 SkyScan query 12:18:19 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 12:18:19 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 12:18:19 Check angles 12:18:19 SkyScan query 12:18:20 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:18:20 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:18:20 Check angles 12:18:20 SkyScan query 12:18:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:18:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:18:21 Message to Master queued w/err=0: serial=116236 error=0 12:18:26 Received message from Master: op=Filter serial=116237 12:18:26 Color wheel filter change from 0 to 0 12:18:26 FLIGetFilterPos err=0 currentPosition=0 12:18:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:26 Filter is already there-color wheel unchanged 12:18:26 Received message from Master: op=Shutter serial=116238 12:18:26 Shutter LASER close 12:18:26 Received message from Camera: op=State serial=116240 12:18:26 GetSingleValue result=40 Value=cccccccc 12:18:26 SkyScan query 12:18:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:18:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:26 Parameters OK 12:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:26 Set A/D data flow result=40 12:18:26 Set A/D channel type result=40 12:18:26 Set A/D encoding result=40 12:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:26 Set channel filter=0.000000e+000 result=40 12:18:26 Config A/D Result=40 12:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:26 Get A/D filter: -9.255963e+061 result=40 12:18:26 Get A/D value=-858993460 result=40 12:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:26 Parameters OK 12:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:26 Set A/D data flow result=40 12:18:26 Set A/D channel type result=40 12:18:26 Set A/D encoding result=40 12:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:26 Set channel filter=0.000000e+000 result=40 12:18:26 Config A/D Result=40 12:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:26 Get A/D filter: -9.255963e+061 result=40 12:18:26 Get A/D value=-858993460 result=40 12:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:26 Aux= 12:18:26 Message to Camera, serial 116240 queued 12:19:03 Received message from Master: op=PointingHead serial=116253 12:19:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:19:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:19:04 Point started: ret=0 12:19:04 point_skyscan result=0 12:19:04 Check angles 12:19:04 SkyScan query 12:19:05 SkyScan query done: ret=0 az=152.955<-10197 ze=8.73<-11418 Statuses=0009 0009 12:19:05 Msec=0 True Az=152.955 Ze=8.73 Az status=0009 Ze status=0009 12:19:05 Check angles 12:19:05 SkyScan query 12:19:06 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.645<-12843 Statuses=0009 0009 12:19:06 Msec=750 True Az=135.105 Ze=-12.645 Az status=0009 Ze status=0009 12:19:06 Check angles 12:19:06 SkyScan query 12:19:06 SkyScan query done: ret=0 az=117.69<-7846 ze=-33.6<-14240 Statuses=0009 0009 12:19:06 Msec=1500 True Az=117.69 Ze=-33.6 Az status=0009 Ze status=0009 12:19:07 Check angles 12:19:07 SkyScan query 12:19:07 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.555<-15437 Statuses=0009 0009 12:19:07 Msec=2250 True Az=100.32 Ze=-51.555 Az status=0009 Ze status=0009 12:19:07 Check angles 12:19:07 SkyScan query 12:19:08 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:19:08 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:19:08 Check angles 12:19:08 SkyScan query 12:19:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:19:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:19:09 Message to Master queued w/err=0: serial=116253 error=0 12:19:14 Received message from Master: op=Filter serial=116254 12:19:14 Color wheel filter change from 0 to 0 12:19:14 FLIGetFilterPos err=0 currentPosition=0 12:19:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:14 Filter is already there-color wheel unchanged 12:19:14 Received message from Master: op=Shutter serial=116255 12:19:14 Shutter LASER close 12:19:14 Received message from Camera: op=State serial=116257 12:19:14 GetSingleValue result=40 Value=cccccccc 12:19:14 SkyScan query 12:19:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:19:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:15 Parameters OK 12:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:15 Set A/D data flow result=40 12:19:15 Set A/D channel type result=40 12:19:15 Set A/D encoding result=40 12:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:15 Set channel filter=0.000000e+000 result=40 12:19:15 Config A/D Result=40 12:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:15 Get A/D filter: -9.255963e+061 result=40 12:19:15 Get A/D value=-858993460 result=40 12:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:15 Parameters OK 12:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:15 Set A/D data flow result=40 12:19:15 Set A/D channel type result=40 12:19:15 Set A/D encoding result=40 12:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:15 Set channel filter=0.000000e+000 result=40 12:19:15 Config A/D Result=40 12:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:15 Get A/D filter: -9.255963e+061 result=40 12:19:15 Get A/D value=-858993460 result=40 12:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:15 Aux= 12:19:15 Message to Camera, serial 116257 queued 12:19:51 Received message from Master: op=PointingHead serial=116270 12:19:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:19:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:19:52 Point started: ret=0 12:19:52 point_skyscan result=0 12:19:52 Check angles 12:19:52 SkyScan query 12:19:53 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.27<-17418 Statuses=0009 0009 12:19:53 Msec=0 True Az=109.02 Ze=-81.27 Az status=0009 Ze status=0009 12:19:53 Check angles 12:19:53 SkyScan query 12:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 12:19:54 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 12:19:54 Check angles 12:19:54 SkyScan query 12:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 12:19:55 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 12:19:55 Check angles 12:19:55 SkyScan query 12:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 12:19:55 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 12:19:55 Check angles 12:19:55 SkyScan query 12:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 12:19:56 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 12:19:56 Check angles 12:19:56 SkyScan query 12:19:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:19:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:19:57 Message to Master queued w/err=0: serial=116270 error=0 12:20:02 Received message from Master: op=Filter serial=116271 12:20:02 Color wheel filter change from 0 to 0 12:20:02 FLIGetFilterPos err=0 currentPosition=0 12:20:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:02 Filter is already there-color wheel unchanged 12:20:02 Received message from Master: op=Shutter serial=116272 12:20:02 Shutter LASER open 12:20:02 Received message from Camera: op=State serial=116274 12:20:02 GetSingleValue result=40 Value=cccccccc 12:20:02 SkyScan query 12:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:20:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:03 Parameters OK 12:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:03 Set A/D data flow result=40 12:20:03 Set A/D channel type result=40 12:20:03 Set A/D encoding result=40 12:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:03 Set channel filter=0.000000e+000 result=40 12:20:03 Config A/D Result=40 12:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:03 Get A/D filter: -9.255963e+061 result=40 12:20:03 Get A/D value=-858993460 result=40 12:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:03 Parameters OK 12:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:03 Set A/D data flow result=40 12:20:03 Set A/D channel type result=40 12:20:03 Set A/D encoding result=40 12:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:03 Set channel filter=0.000000e+000 result=40 12:20:03 Config A/D Result=40 12:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:03 Get A/D filter: -9.255963e+061 result=40 12:20:03 Get A/D value=-858993460 result=40 12:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:03 Aux= 12:20:03 Message to Camera, serial 116274 queued 12:20:11 Received message from Master: op=Shutter serial=116284 12:20:11 Shutter LASER close 12:20:12 Received message from Master: op=PointingHead serial=116288 12:20:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:20:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:20:12 Point started: ret=0 12:20:12 point_skyscan result=0 12:20:13 Check angles 12:20:13 SkyScan query 12:20:13 SkyScan query done: ret=0 az=89.865<-5991 ze=157.14<-1524 Statuses=0009 0009 12:20:13 Msec=0 True Az=89.865 Ze=157.14 Az status=0009 Ze status=0009 12:20:13 Check angles 12:20:13 SkyScan query 12:20:14 SkyScan query done: ret=0 az=72.315<-4821 ze=136.2<-2920 Statuses=0009 0009 12:20:14 Msec=750 True Az=72.315 Ze=136.2 Az status=0009 Ze status=0009 12:20:14 Check angles 12:20:14 SkyScan query 12:20:15 SkyScan query done: ret=0 az=54.96<-3664 ze=115.23<-4318 Statuses=0009 0009 12:20:15 Msec=1500 True Az=54.96 Ze=115.23 Az status=0009 Ze status=0009 12:20:15 Check angles 12:20:15 SkyScan query 12:20:16 SkyScan query done: ret=0 az=40.935<-2729 ze=94.245<-5717 Statuses=0009 0009 12:20:16 Msec=2250 True Az=40.935 Ze=94.245 Az status=0009 Ze status=0009 12:20:16 Check angles 12:20:16 SkyScan query 12:20:16 SkyScan query done: ret=0 az=40.995<-2733 ze=73.29<-7114 Statuses=0008 0009 12:20:16 Msec=3000 True Az=40.995 Ze=73.29 Az status=0008 Ze status=0009 12:20:16 Check angles 12:20:16 SkyScan query 12:20:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 12:20:17 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 12:20:17 Check angles 12:20:17 SkyScan query 12:20:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:20:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:20:18 Message to Master queued w/err=0: serial=116288 error=0 12:20:23 Received message from Master: op=Filter serial=116289 12:20:23 Color wheel filter change from 0 to 0 12:20:23 FLIGetFilterPos err=0 currentPosition=0 12:20:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:23 Filter is already there-color wheel unchanged 12:20:23 Received message from Master: op=Shutter serial=116290 12:20:23 Shutter LASER close 12:20:23 Received message from Camera: op=State serial=116292 12:20:23 GetSingleValue result=40 Value=cccccccc 12:20:23 SkyScan query 12:20:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:20:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:24 Parameters OK 12:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:24 Set A/D data flow result=40 12:20:24 Set A/D channel type result=40 12:20:24 Set A/D encoding result=40 12:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:24 Set channel filter=0.000000e+000 result=40 12:20:24 Config A/D Result=40 12:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:24 Get A/D filter: -9.255963e+061 result=40 12:20:24 Get A/D value=-858993460 result=40 12:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:24 Parameters OK 12:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:24 Set A/D data flow result=40 12:20:24 Set A/D channel type result=40 12:20:24 Set A/D encoding result=40 12:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:24 Set channel filter=0.000000e+000 result=40 12:20:24 Config A/D Result=40 12:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:24 Get A/D filter: -9.255963e+061 result=40 12:20:24 Get A/D value=-858993460 result=40 12:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:24 Aux= 12:20:24 Message to Camera, serial 116292 queued 12:21:01 Received message from Master: op=PointingHead serial=116305 12:21:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:21:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:21:01 Point started: ret=0 12:21:01 point_skyscan result=0 12:21:02 Check angles 12:21:02 SkyScan query 12:21:02 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 12:21:02 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 12:21:02 Check angles 12:21:02 SkyScan query 12:21:03 SkyScan query done: ret=0 az=81.855<-5457 ze=66.495<-7567 Statuses=0009 0008 12:21:03 Msec=750 True Az=81.855 Ze=66.495 Az status=0009 Ze status=0008 12:21:03 Check angles 12:21:03 SkyScan query 12:21:04 SkyScan query done: ret=0 az=99.285<-6619 ze=66.495<-7567 Statuses=0009 0008 12:21:04 Msec=1500 True Az=99.285 Ze=66.495 Az status=0009 Ze status=0008 12:21:04 Check angles 12:21:04 SkyScan query 12:21:04 SkyScan query done: ret=0 az=117.285<-7819 ze=66.495<-7567 Statuses=0009 0008 12:21:04 Msec=2250 True Az=117.285 Ze=66.495 Az status=0009 Ze status=0008 12:21:05 Check angles 12:21:05 SkyScan query 12:21:05 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 12:21:05 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 12:21:05 Check angles 12:21:05 SkyScan query 12:21:06 SkyScan query done: ret=0 az=152.07<-10138 ze=66.495<-7567 Statuses=0009 0008 12:21:06 Msec=3750 True Az=152.07 Ze=66.495 Az status=0009 Ze status=0008 12:21:06 Check angles 12:21:06 SkyScan query 12:21:07 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:21:07 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:21:07 Message to Master queued w/err=0: serial=116305 error=0 12:21:12 Received message from Master: op=Filter serial=116306 12:21:12 Color wheel filter change from 0 to 0 12:21:12 FLIGetFilterPos err=0 currentPosition=0 12:21:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:12 Filter is already there-color wheel unchanged 12:21:12 Received message from Master: op=Shutter serial=116307 12:21:12 Shutter LASER close 12:21:12 Received message from Camera: op=State serial=116309 12:21:12 GetSingleValue result=40 Value=cccccccc 12:21:12 SkyScan query 12:21:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:21:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:13 Parameters OK 12:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:13 Set A/D data flow result=40 12:21:13 Set A/D channel type result=40 12:21:13 Set A/D encoding result=40 12:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:13 Set channel filter=0.000000e+000 result=40 12:21:13 Config A/D Result=40 12:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:13 Get A/D filter: -9.255963e+061 result=40 12:21:13 Get A/D value=-858993460 result=40 12:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:13 Parameters OK 12:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:13 Set A/D data flow result=40 12:21:13 Set A/D channel type result=40 12:21:13 Set A/D encoding result=40 12:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:13 Set channel filter=0.000000e+000 result=40 12:21:13 Config A/D Result=40 12:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:13 Get A/D filter: -9.255963e+061 result=40 12:21:13 Get A/D value=-858993460 result=40 12:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:13 Aux= 12:21:13 Message to Camera, serial 116309 queued 12:21:49 Received message from Master: op=PointingHead serial=116322 12:21:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:21:49 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:21:50 Point started: ret=0 12:21:50 point_skyscan result=0 12:21:50 Check angles 12:21:50 SkyScan query 12:21:51 SkyScan query done: ret=0 az=134.565<-8971 ze=36.33<-9578 Statuses=0009 0009 12:21:51 Msec=0 True Az=134.565 Ze=36.33 Az status=0009 Ze status=0009 12:21:51 Check angles 12:21:51 SkyScan query 12:21:52 SkyScan query done: ret=0 az=117.195<-7813 ze=15.42<-10972 Statuses=0009 0009 12:21:52 Msec=750 True Az=117.195 Ze=15.42 Az status=0009 Ze status=0009 12:21:52 Check angles 12:21:52 SkyScan query 12:21:53 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.58<-12372 Statuses=0009 0009 12:21:53 Msec=1500 True Az=99.825 Ze=-5.58 Az status=0009 Ze status=0009 12:21:53 Check angles 12:21:53 SkyScan query 12:21:53 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.55<-13770 Statuses=0009 0009 12:21:53 Msec=2250 True Az=82.335 Ze=-26.55 Az status=0009 Ze status=0009 12:21:53 Check angles 12:21:53 SkyScan query 12:21:54 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.565<-14571 Statuses=0009 0008 12:21:54 Msec=3000 True Az=64.785 Ze=-38.565 Az status=0009 Ze status=0008 12:21:54 Check angles 12:21:54 SkyScan query 12:21:55 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.535<-14569 Statuses=0009 0008 12:21:55 Msec=3750 True Az=47.31 Ze=-38.535 Az status=0009 Ze status=0008 12:21:55 Check angles 12:21:55 SkyScan query 12:21:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:21:56 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:21:56 Message to Master queued w/err=0: serial=116322 error=0 12:22:01 Received message from Master: op=Filter serial=116323 12:22:01 Color wheel filter change from 0 to 0 12:22:01 FLIGetFilterPos err=0 currentPosition=0 12:22:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:01 Filter is already there-color wheel unchanged 12:22:01 Received message from Master: op=Shutter serial=116324 12:22:01 Shutter LASER close 12:22:01 Received message from Camera: op=State serial=116326 12:22:01 GetSingleValue result=40 Value=cccccccc 12:22:01 SkyScan query 12:22:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:22:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:01 Parameters OK 12:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:01 Set A/D data flow result=40 12:22:01 Set A/D channel type result=40 12:22:01 Set A/D encoding result=40 12:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:01 Set channel filter=0.000000e+000 result=40 12:22:01 Config A/D Result=40 12:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:01 Get A/D filter: -9.255963e+061 result=40 12:22:01 Get A/D value=-858993460 result=40 12:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:01 Parameters OK 12:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:01 Set A/D data flow result=40 12:22:01 Set A/D channel type result=40 12:22:01 Set A/D encoding result=40 12:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:01 Set channel filter=0.000000e+000 result=40 12:22:01 Config A/D Result=40 12:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:01 Get A/D filter: -9.255963e+061 result=40 12:22:01 Get A/D value=-858993460 result=40 12:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:01 Aux= 12:22:01 Message to Camera, serial 116326 queued 12:22:38 Received message from Master: op=PointingHead serial=116339 12:22:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:22:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:22:39 Point started: ret=0 12:22:39 point_skyscan result=0 12:22:39 Check angles 12:22:39 SkyScan query 12:22:40 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.01<-16534 Statuses=0009 0009 12:22:40 Msec=0 True Az=63.87 Ze=-68.01 Az status=0009 Ze status=0009 12:22:40 Check angles 12:22:40 SkyScan query 12:22:41 SkyScan query done: ret=0 az=81.195<-5413 ze=-88.98<-17932 Statuses=0009 0009 12:22:41 Msec=750 True Az=81.195 Ze=-88.98 Az status=0009 Ze status=0009 12:22:41 Check angles 12:22:41 SkyScan query 12:22:41 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.445<-19363 Statuses=0009 0009 12:22:41 Msec=1500 True Az=99.06 Ze=-110.445 Az status=0009 Ze status=0009 12:22:42 Check angles 12:22:42 SkyScan query 12:22:42 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.34<-20756 Statuses=0009 0009 12:22:42 Msec=2250 True Az=116.64 Ze=-131.34 Az status=0009 Ze status=0009 12:22:42 Check angles 12:22:42 SkyScan query 12:22:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:22:43 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:22:43 Check angles 12:22:43 SkyScan query 12:22:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:22:44 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:22:44 Message to Master queued w/err=0: serial=116339 error=0 12:22:49 Received message from Master: op=Filter serial=116340 12:22:49 Color wheel filter change from 0 to 0 12:22:49 FLIGetFilterPos err=0 currentPosition=0 12:22:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:49 Filter is already there-color wheel unchanged 12:22:49 Received message from Master: op=Shutter serial=116341 12:22:49 Shutter LASER close 12:22:49 Received message from Camera: op=State serial=116343 12:22:49 GetSingleValue result=40 Value=cccccccc 12:22:49 SkyScan query 12:22:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:22:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:49 Parameters OK 12:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:49 Set A/D data flow result=40 12:22:49 Set A/D channel type result=40 12:22:49 Set A/D encoding result=40 12:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:49 Set channel filter=0.000000e+000 result=40 12:22:49 Config A/D Result=40 12:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:49 Get A/D filter: -9.255963e+061 result=40 12:22:49 Get A/D value=-858993460 result=40 12:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:49 Parameters OK 12:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:49 Set A/D data flow result=40 12:22:49 Set A/D channel type result=40 12:22:49 Set A/D encoding result=40 12:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:49 Set channel filter=0.000000e+000 result=40 12:22:49 Config A/D Result=40 12:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:49 Get A/D filter: -9.255963e+061 result=40 12:22:49 Get A/D value=-858993460 result=40 12:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:49 Aux= 12:22:49 Message to Camera, serial 116343 queued 12:23:26 Received message from Master: op=PointingHead serial=116356 12:23:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:23:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:23:27 Point started: ret=0 12:23:27 point_skyscan result=0 12:23:27 Check angles 12:23:27 SkyScan query 12:23:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 12:23:28 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 12:23:28 Check angles 12:23:28 SkyScan query 12:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:23:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:23:29 Message to Master queued w/err=0: serial=116356 error=0 12:23:34 Received message from Master: op=Filter serial=116357 12:23:34 Color wheel filter change from 0 to 0 12:23:34 FLIGetFilterPos err=0 currentPosition=0 12:23:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:34 Filter is already there-color wheel unchanged 12:23:34 Received message from Master: op=Shutter serial=116358 12:23:34 Shutter LASER open 12:23:34 Received message from Camera: op=State serial=116360 12:23:34 GetSingleValue result=40 Value=cccccccc 12:23:34 SkyScan query 12:23:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:23:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:35 Parameters OK 12:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:35 Set A/D data flow result=40 12:23:35 Set A/D channel type result=40 12:23:35 Set A/D encoding result=40 12:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:35 Set channel filter=0.000000e+000 result=40 12:23:35 Config A/D Result=40 12:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:35 Get A/D filter: -9.255963e+061 result=40 12:23:35 Get A/D value=-858993460 result=40 12:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:35 Parameters OK 12:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:35 Set A/D data flow result=40 12:23:35 Set A/D channel type result=40 12:23:35 Set A/D encoding result=40 12:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:35 Set channel filter=0.000000e+000 result=40 12:23:35 Config A/D Result=40 12:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:35 Get A/D filter: -9.255963e+061 result=40 12:23:35 Get A/D value=-858993460 result=40 12:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:35 Aux= 12:23:35 Message to Camera, serial 116360 queued 12:23:42 Received message from Master: op=Shutter serial=116369 12:23:42 Shutter LASER close 12:23:43 Received message from Master: op=PointingHead serial=116373 12:23:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:23:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:23:43 Point started: ret=0 12:23:43 point_skyscan result=0 12:23:44 Check angles 12:23:44 SkyScan query 12:23:44 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.31<-21554 Statuses=0009 0009 12:23:44 Msec=0 True Az=135.9 Ze=-143.31 Az status=0009 Ze status=0009 12:23:45 Check angles 12:23:45 SkyScan query 12:23:45 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.875<-20125 Statuses=0009 0009 12:23:45 Msec=750 True Az=153.765 Ze=-121.875 Az status=0009 Ze status=0009 12:23:45 Check angles 12:23:45 SkyScan query 12:23:46 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.935<-18729 Statuses=0009 0009 12:23:46 Msec=1500 True Az=171.24 Ze=-100.935 Az status=0009 Ze status=0009 12:23:46 Check angles 12:23:46 SkyScan query 12:23:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.53<-17302 Statuses=0008 0009 12:23:47 Msec=2250 True Az=176.01 Ze=-79.53 Az status=0008 Ze status=0009 12:23:47 Check angles 12:23:47 SkyScan query 12:23:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.14<-15876 Statuses=0008 0009 12:23:47 Msec=3000 True Az=176.01 Ze=-58.14 Az status=0008 Ze status=0009 12:23:48 Check angles 12:23:48 SkyScan query 12:23:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:23:48 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:23:48 Message to Master queued w/err=0: serial=116373 error=0 12:23:53 Received message from Master: op=Filter serial=116374 12:23:53 Color wheel filter change from 0 to 0 12:23:53 FLIGetFilterPos err=0 currentPosition=0 12:23:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:53 Filter is already there-color wheel unchanged 12:23:53 Received message from Master: op=Shutter serial=116375 12:23:53 Shutter LASER close 12:23:54 Received message from Camera: op=State serial=116377 12:23:54 GetSingleValue result=40 Value=cccccccc 12:23:54 SkyScan query 12:23:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:23:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:54 Parameters OK 12:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:54 Set A/D data flow result=40 12:23:54 Set A/D channel type result=40 12:23:54 Set A/D encoding result=40 12:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:54 Set channel filter=0.000000e+000 result=40 12:23:54 Config A/D Result=40 12:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:54 Get A/D filter: -9.255963e+061 result=40 12:23:54 Get A/D value=-858993460 result=40 12:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:54 Parameters OK 12:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:54 Set A/D data flow result=40 12:23:54 Set A/D channel type result=40 12:23:54 Set A/D encoding result=40 12:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:54 Set channel filter=0.000000e+000 result=40 12:23:54 Config A/D Result=40 12:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:54 Get A/D filter: -9.255963e+061 result=40 12:23:54 Get A/D value=-858993460 result=40 12:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:54 Aux= 12:23:54 Message to Camera, serial 116377 queued 12:24:31 Received message from Master: op=PointingHead serial=116390 12:24:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:24:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:24:31 Point started: ret=0 12:24:31 point_skyscan result=0 12:24:32 Check angles 12:24:32 SkyScan query 12:24:33 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.945<-13463 Statuses=0009 0009 12:24:33 Msec=0 True Az=152.97 Ze=-21.945 Az status=0009 Ze status=0009 12:24:33 Check angles 12:24:33 SkyScan query 12:24:33 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.945<-12063 Statuses=0009 0009 12:24:33 Msec=750 True Az=135.39 Ze=-0.945 Az status=0009 Ze status=0009 12:24:34 Check angles 12:24:34 SkyScan query 12:24:34 SkyScan query done: ret=0 az=117.96<-7864 ze=20.01<-10666 Statuses=0009 0009 12:24:34 Msec=1500 True Az=117.96 Ze=20.01 Az status=0009 Ze status=0009 12:24:34 Check angles 12:24:34 SkyScan query 12:24:35 SkyScan query done: ret=0 az=100.59<-6706 ze=40.965<-9269 Statuses=0009 0009 12:24:35 Msec=2250 True Az=100.59 Ze=40.965 Az status=0009 Ze status=0009 12:24:35 Check angles 12:24:35 SkyScan query 12:24:36 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:24:36 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:24:36 Check angles 12:24:36 SkyScan query 12:24:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:24:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:24:36 Message to Master queued w/err=0: serial=116390 error=0 12:24:41 Received message from Master: op=Filter serial=116391 12:24:41 Color wheel filter change from 0 to 0 12:24:41 FLIGetFilterPos err=0 currentPosition=0 12:24:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:41 Filter is already there-color wheel unchanged 12:24:42 Received message from Master: op=Shutter serial=116392 12:24:42 Shutter LASER close 12:24:42 Received message from Camera: op=State serial=116394 12:24:42 GetSingleValue result=40 Value=cccccccc 12:24:42 SkyScan query 12:24:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:24:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:42 Parameters OK 12:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:42 Set A/D data flow result=40 12:24:42 Set A/D channel type result=40 12:24:42 Set A/D encoding result=40 12:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:42 Set channel filter=0.000000e+000 result=40 12:24:42 Config A/D Result=40 12:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:42 Get A/D filter: -9.255963e+061 result=40 12:24:42 Get A/D value=-858993460 result=40 12:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:42 Parameters OK 12:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:42 Set A/D data flow result=40 12:24:42 Set A/D channel type result=40 12:24:42 Set A/D encoding result=40 12:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:42 Set channel filter=0.000000e+000 result=40 12:24:42 Config A/D Result=40 12:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:42 Get A/D filter: -9.255963e+061 result=40 12:24:42 Get A/D value=-858993460 result=40 12:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:42 Aux= 12:24:42 Message to Camera, serial 116394 queued 12:25:19 Received message from Master: op=PointingHead serial=116407 12:25:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:25:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:25:19 Point started: ret=0 12:25:19 point_skyscan result=0 12:25:20 Check angles 12:25:20 SkyScan query 12:25:21 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 12:25:21 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 12:25:21 Check angles 12:25:21 SkyScan query 12:25:21 SkyScan query done: ret=0 az=126.39<-8426 ze=38.49<-9434 Statuses=0009 0008 12:25:21 Msec=750 True Az=126.39 Ze=38.49 Az status=0009 Ze status=0008 12:25:22 Check angles 12:25:22 SkyScan query 12:25:22 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 12:25:22 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 12:25:22 Check angles 12:25:22 SkyScan query 12:25:23 SkyScan query done: ret=0 az=161.25<-10750 ze=38.505<-9433 Statuses=0009 0008 12:25:23 Msec=2250 True Az=161.25 Ze=38.505 Az status=0009 Ze status=0008 12:25:23 Check angles 12:25:23 SkyScan query 12:25:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:25:24 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:25:24 Check angles 12:25:24 SkyScan query 12:25:24 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:25:24 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:25:24 Message to Master queued w/err=0: serial=116407 error=0 12:25:29 Received message from Master: op=Filter serial=116408 12:25:29 Color wheel filter change from 0 to 0 12:25:29 FLIGetFilterPos err=0 currentPosition=0 12:25:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:29 Filter is already there-color wheel unchanged 12:25:30 Received message from Master: op=Shutter serial=116409 12:25:30 Shutter LASER close 12:25:30 Received message from Camera: op=State serial=116411 12:25:30 GetSingleValue result=40 Value=cccccccc 12:25:30 SkyScan query 12:25:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:25:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:30 Parameters OK 12:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:30 Set A/D data flow result=40 12:25:30 Set A/D channel type result=40 12:25:30 Set A/D encoding result=40 12:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:30 Set channel filter=0.000000e+000 result=40 12:25:30 Config A/D Result=40 12:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:30 Get A/D filter: -9.255963e+061 result=40 12:25:30 Get A/D value=-858993460 result=40 12:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:30 Parameters OK 12:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:30 Set A/D data flow result=40 12:25:30 Set A/D channel type result=40 12:25:30 Set A/D encoding result=40 12:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:30 Set channel filter=0.000000e+000 result=40 12:25:30 Config A/D Result=40 12:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:30 Get A/D filter: -9.255963e+061 result=40 12:25:30 Get A/D value=-858993460 result=40 12:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:30 Aux= 12:25:30 Message to Camera, serial 116411 queued 12:26:07 Received message from Master: op=PointingHead serial=116424 12:26:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:26:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:26:07 Point started: ret=0 12:26:07 point_skyscan result=0 12:26:08 Check angles 12:26:08 SkyScan query 12:26:09 SkyScan query done: ret=0 az=152.955<-10197 ze=8.64<-11424 Statuses=0009 0009 12:26:09 Msec=0 True Az=152.955 Ze=8.64 Az status=0009 Ze status=0009 12:26:09 Check angles 12:26:09 SkyScan query 12:26:09 SkyScan query done: ret=0 az=135.57<-9038 ze=-12.3<-12820 Statuses=0009 0009 12:26:09 Msec=750 True Az=135.57 Ze=-12.3 Az status=0009 Ze status=0009 12:26:10 Check angles 12:26:10 SkyScan query 12:26:10 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.24<-14216 Statuses=0009 0009 12:26:10 Msec=1500 True Az=118.02 Ze=-33.24 Az status=0009 Ze status=0009 12:26:10 Check angles 12:26:10 SkyScan query [UTC 2018-12-13 12:26:11] 12:26:11 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.54<-15436 Statuses=0009 0009 12:26:11 Msec=2250 True Az=100.62 Ze=-51.54 Az status=0009 Ze status=0009 12:26:11 Check angles 12:26:11 SkyScan query 12:26:12 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 12:26:12 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 12:26:12 Check angles 12:26:12 SkyScan query 12:26:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:26:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:26:12 Message to Master queued w/err=0: serial=116424 error=0 12:26:17 Received message from Master: op=Filter serial=116425 12:26:17 Color wheel filter change from 0 to 0 12:26:17 FLIGetFilterPos err=0 currentPosition=0 12:26:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:17 Filter is already there-color wheel unchanged 12:26:18 Received message from Master: op=Shutter serial=116426 12:26:18 Shutter LASER close 12:26:18 Received message from Camera: op=State serial=116428 12:26:18 GetSingleValue result=40 Value=cccccccc 12:26:18 SkyScan query 12:26:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:26:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:18 Parameters OK 12:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:18 Set A/D data flow result=40 12:26:18 Set A/D channel type result=40 12:26:18 Set A/D encoding result=40 12:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:18 Set channel filter=0.000000e+000 result=40 12:26:18 Config A/D Result=40 12:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:18 Get A/D filter: -9.255963e+061 result=40 12:26:18 Get A/D value=-858993460 result=40 12:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:18 Parameters OK 12:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:18 Set A/D data flow result=40 12:26:18 Set A/D channel type result=40 12:26:18 Set A/D encoding result=40 12:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:18 Set channel filter=0.000000e+000 result=40 12:26:18 Config A/D Result=40 12:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:18 Get A/D filter: -9.255963e+061 result=40 12:26:18 Get A/D value=-858993460 result=40 12:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:18 Aux= 12:26:18 Message to Camera, serial 116428 queued 12:26:55 Received message from Master: op=PointingHead serial=116441 12:26:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:26:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:26:55 Point started: ret=0 12:26:55 point_skyscan result=0 12:26:56 Check angles 12:26:56 SkyScan query 12:26:57 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.075<-17405 Statuses=0009 0009 12:26:57 Msec=0 True Az=108.795 Ze=-81.075 Az status=0009 Ze status=0009 12:26:57 Check angles 12:26:57 SkyScan query 12:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 12:26:58 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 12:26:58 Check angles 12:26:58 SkyScan query 12:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 12:26:58 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 12:26:58 Check angles 12:26:58 SkyScan query 12:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.97<-21598 Statuses=0008 0009 12:26:59 Msec=2250 True Az=112.995 Ze=-143.97 Az status=0008 Ze status=0009 12:26:59 Check angles 12:26:59 SkyScan query 12:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 12:27:00 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 12:27:00 Check angles 12:27:00 SkyScan query 12:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:27:01 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:27:01 Message to Master queued w/err=0: serial=116441 error=0 12:27:06 Received message from Master: op=Filter serial=116442 12:27:06 Color wheel filter change from 0 to 0 12:27:06 FLIGetFilterPos err=0 currentPosition=0 12:27:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:06 Filter is already there-color wheel unchanged 12:27:06 Received message from Master: op=Shutter serial=116443 12:27:06 Shutter LASER open 12:27:06 Received message from Camera: op=State serial=116445 12:27:06 GetSingleValue result=40 Value=cccccccc 12:27:06 SkyScan query 12:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:06 Parameters OK 12:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:06 Set A/D data flow result=40 12:27:06 Set A/D channel type result=40 12:27:06 Set A/D encoding result=40 12:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:06 Set channel filter=0.000000e+000 result=40 12:27:06 Config A/D Result=40 12:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:06 Get A/D filter: -9.255963e+061 result=40 12:27:06 Get A/D value=-858993460 result=40 12:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:06 Parameters OK 12:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:06 Set A/D data flow result=40 12:27:06 Set A/D channel type result=40 12:27:06 Set A/D encoding result=40 12:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:06 Set channel filter=0.000000e+000 result=40 12:27:06 Config A/D Result=40 12:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:06 Get A/D filter: -9.255963e+061 result=40 12:27:06 Get A/D value=-858993460 result=40 12:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:06 Aux= 12:27:06 Message to Camera, serial 116445 queued 12:27:15 Received message from Master: op=Shutter serial=116455 12:27:15 Shutter LASER close 12:27:15 Received message from Master: op=PointingHead serial=116459 12:27:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:27:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:27:16 Point started: ret=0 12:27:16 point_skyscan result=0 12:27:16 Check angles 12:27:16 SkyScan query 12:27:17 SkyScan query done: ret=0 az=89.655<-5977 ze=157.02<-1532 Statuses=0009 0009 12:27:17 Msec=0 True Az=89.655 Ze=157.02 Az status=0009 Ze status=0009 12:27:17 Check angles 12:27:17 SkyScan query 12:27:18 SkyScan query done: ret=0 az=72.24<-4816 ze=136.02<-2932 Statuses=0009 0009 12:27:18 Msec=750 True Az=72.24 Ze=136.02 Az status=0009 Ze status=0009 12:27:18 Check angles 12:27:18 SkyScan query 12:27:18 SkyScan query done: ret=0 az=54.9<-3660 ze=115.11<-4326 Statuses=0009 0009 12:27:18 Msec=1500 True Az=54.9 Ze=115.11 Az status=0009 Ze status=0009 12:27:19 Check angles 12:27:19 SkyScan query 12:27:19 SkyScan query done: ret=0 az=40.935<-2729 ze=93.705<-5753 Statuses=0009 0009 12:27:19 Msec=2250 True Az=40.935 Ze=93.705 Az status=0009 Ze status=0009 12:27:19 Check angles 12:27:19 SkyScan query 12:27:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 12:27:20 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 12:27:20 Check angles 12:27:20 SkyScan query 12:27:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 12:27:21 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 12:27:21 Check angles 12:27:21 SkyScan query 12:27:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:27:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:27:22 Message to Master queued w/err=0: serial=116459 error=0 12:27:27 Received message from Master: op=Filter serial=116460 12:27:27 Color wheel filter change from 0 to 0 12:27:27 FLIGetFilterPos err=0 currentPosition=0 12:27:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:27 Filter is already there-color wheel unchanged 12:27:27 Received message from Master: op=Shutter serial=116461 12:27:27 Shutter LASER close 12:27:27 Received message from Camera: op=State serial=116463 12:27:27 GetSingleValue result=40 Value=cccccccc 12:27:27 SkyScan query 12:27:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:27:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:27 Parameters OK 12:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:27 Set A/D data flow result=40 12:27:27 Set A/D channel type result=40 12:27:27 Set A/D encoding result=40 12:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:27 Set channel filter=0.000000e+000 result=40 12:27:27 Config A/D Result=40 12:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:27 Get A/D filter: -9.255963e+061 result=40 12:27:27 Get A/D value=-858993460 result=40 12:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:27 Parameters OK 12:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:27 Set A/D data flow result=40 12:27:27 Set A/D channel type result=40 12:27:27 Set A/D encoding result=40 12:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:27 Set channel filter=0.000000e+000 result=40 12:27:27 Config A/D Result=40 12:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:27 Get A/D filter: -9.255963e+061 result=40 12:27:27 Get A/D value=-858993460 result=40 12:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:27 Aux= 12:27:27 Message to Camera, serial 116463 queued 12:28:03 Received message from Master: op=PointingHead serial=116475 12:28:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:28:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:28:04 Point started: ret=0 12:28:04 point_skyscan result=0 12:28:04 Check angles 12:28:04 SkyScan query 12:28:05 SkyScan query done: ret=0 az=64.395<-4293 ze=66.555<-7563 Statuses=0009 0008 12:28:05 Msec=0 True Az=64.395 Ze=66.555 Az status=0009 Ze status=0008 12:28:05 Check angles 12:28:05 SkyScan query 12:28:06 SkyScan query done: ret=0 az=82.305<-5487 ze=66.495<-7567 Statuses=0009 0008 12:28:06 Msec=750 True Az=82.305 Ze=66.495 Az status=0009 Ze status=0008 12:28:06 Check angles 12:28:06 SkyScan query 12:28:07 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 12:28:07 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 12:28:07 Check angles 12:28:07 SkyScan query 12:28:07 SkyScan query done: ret=0 az=117.3<-7820 ze=66.495<-7567 Statuses=0009 0008 12:28:07 Msec=2250 True Az=117.3 Ze=66.495 Az status=0009 Ze status=0008 12:28:07 Check angles 12:28:07 SkyScan query 12:28:08 SkyScan query done: ret=0 az=134.745<-8983 ze=66.495<-7567 Statuses=0009 0008 12:28:08 Msec=3000 True Az=134.745 Ze=66.495 Az status=0009 Ze status=0008 12:28:08 Check angles 12:28:08 SkyScan query 12:28:09 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 12:28:09 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 12:28:09 Check angles 12:28:09 SkyScan query 12:28:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:28:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:28:10 Message to Master queued w/err=0: serial=116475 error=0 12:28:15 Received message from Master: op=Filter serial=116476 12:28:15 Color wheel filter change from 0 to 0 12:28:15 FLIGetFilterPos err=0 currentPosition=0 12:28:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:15 Filter is already there-color wheel unchanged 12:28:15 Received message from Master: op=Shutter serial=116477 12:28:15 Shutter LASER close 12:28:15 Received message from Camera: op=State serial=116479 12:28:15 GetSingleValue result=40 Value=cccccccc 12:28:15 SkyScan query 12:28:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:28:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:15 Parameters OK 12:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:15 Set A/D data flow result=40 12:28:15 Set A/D channel type result=40 12:28:15 Set A/D encoding result=40 12:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:15 Set channel filter=0.000000e+000 result=40 12:28:15 Config A/D Result=40 12:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:15 Get A/D filter: -9.255963e+061 result=40 12:28:15 Get A/D value=-858993460 result=40 12:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:15 Parameters OK 12:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:15 Set A/D data flow result=40 12:28:15 Set A/D channel type result=40 12:28:15 Set A/D encoding result=40 12:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:15 Set channel filter=0.000000e+000 result=40 12:28:15 Config A/D Result=40 12:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:15 Get A/D filter: -9.255963e+061 result=40 12:28:15 Get A/D value=-858993460 result=40 12:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:15 Aux= 12:28:15 Message to Camera, serial 116479 queued 12:28:52 Received message from Master: op=PointingHead serial=116492 12:28:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:28:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:28:53 Point started: ret=0 12:28:53 point_skyscan result=0 12:28:53 Check angles 12:28:53 SkyScan query 12:28:54 SkyScan query done: ret=0 az=134.985<-8999 ze=36.765<-9549 Statuses=0009 0009 12:28:54 Msec=0 True Az=134.985 Ze=36.765 Az status=0009 Ze status=0009 12:28:54 Check angles 12:28:54 SkyScan query 12:28:55 SkyScan query done: ret=0 az=117.525<-7835 ze=15.84<-10944 Statuses=0009 0009 12:28:55 Msec=750 True Az=117.525 Ze=15.84 Az status=0009 Ze status=0009 12:28:55 Check angles 12:28:55 SkyScan query 12:28:55 SkyScan query done: ret=0 az=99.675<-6645 ze=-5.55<-12370 Statuses=0009 0009 12:28:55 Msec=1500 True Az=99.675 Ze=-5.55 Az status=0009 Ze status=0009 12:28:56 Check angles 12:28:56 SkyScan query 12:28:56 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.52<-13768 Statuses=0009 0009 12:28:56 Msec=2250 True Az=82.245 Ze=-26.52 Az status=0009 Ze status=0009 12:28:56 Check angles 12:28:56 SkyScan query 12:28:57 SkyScan query done: ret=0 az=64.41<-4294 ze=-38.565<-14571 Statuses=0009 0008 12:28:57 Msec=3000 True Az=64.41 Ze=-38.565 Az status=0009 Ze status=0008 12:28:57 Check angles 12:28:57 SkyScan query 12:28:58 SkyScan query done: ret=0 az=46.995<-3133 ze=-38.535<-14569 Statuses=0009 0008 12:28:58 Msec=3750 True Az=46.995 Ze=-38.535 Az status=0009 Ze status=0008 12:28:58 Check angles 12:28:58 SkyScan query 12:28:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:28:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:28:58 Message to Master queued w/err=0: serial=116492 error=0 12:29:03 Received message from Master: op=Filter serial=116493 12:29:03 Color wheel filter change from 0 to 0 12:29:03 FLIGetFilterPos err=0 currentPosition=0 12:29:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:03 Filter is already there-color wheel unchanged 12:29:04 Received message from Master: op=Shutter serial=116494 12:29:04 Shutter LASER close 12:29:04 Received message from Camera: op=State serial=116496 12:29:04 GetSingleValue result=40 Value=cccccccc 12:29:04 SkyScan query 12:29:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:29:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:04 Parameters OK 12:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:04 Set A/D data flow result=40 12:29:04 Set A/D channel type result=40 12:29:04 Set A/D encoding result=40 12:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:04 Set channel filter=0.000000e+000 result=40 12:29:04 Config A/D Result=40 12:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:04 Get A/D filter: -9.255963e+061 result=40 12:29:04 Get A/D value=-858993460 result=40 12:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:04 Parameters OK 12:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:04 Set A/D data flow result=40 12:29:04 Set A/D channel type result=40 12:29:04 Set A/D encoding result=40 12:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:04 Set channel filter=0.000000e+000 result=40 12:29:04 Config A/D Result=40 12:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:04 Get A/D filter: -9.255963e+061 result=40 12:29:04 Get A/D value=-858993460 result=40 12:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:04 Aux= 12:29:04 Message to Camera, serial 116496 queued 12:29:41 Received message from Master: op=PointingHead serial=116509 12:29:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:29:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:29:41 Point started: ret=0 12:29:41 point_skyscan result=0 12:29:42 Check angles 12:29:42 SkyScan query 12:29:43 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.085<-16539 Statuses=0009 0009 12:29:43 Msec=0 True Az=63.81 Ze=-68.085 Az status=0009 Ze status=0009 12:29:43 Check angles 12:29:43 SkyScan query 12:29:44 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.505<-17967 Statuses=0009 0009 12:29:44 Msec=750 True Az=81.615 Ze=-89.505 Az status=0009 Ze status=0009 12:29:44 Check angles 12:29:44 SkyScan query 12:29:44 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.46<-19364 Statuses=0009 0009 12:29:44 Msec=1500 True Az=99.12 Ze=-110.46 Az status=0009 Ze status=0009 12:29:44 Check angles 12:29:44 SkyScan query 12:29:45 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.4<-20760 Statuses=0009 0009 12:29:45 Msec=2250 True Az=116.64 Ze=-131.4 Az status=0009 Ze status=0009 12:29:45 Check angles 12:29:45 SkyScan query 12:29:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:29:46 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:29:46 Check angles 12:29:46 SkyScan query 12:29:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:29:47 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:29:47 Message to Master queued w/err=0: serial=116509 error=0 12:29:52 Received message from Master: op=Filter serial=116510 12:29:52 Color wheel filter change from 0 to 0 12:29:52 FLIGetFilterPos err=0 currentPosition=0 12:29:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:52 Filter is already there-color wheel unchanged 12:29:52 Received message from Master: op=Shutter serial=116511 12:29:52 Shutter LASER close 12:29:52 Received message from Camera: op=State serial=116513 12:29:52 GetSingleValue result=40 Value=cccccccc 12:29:52 SkyScan query 12:29:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:29:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:52 Parameters OK 12:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:52 Set A/D data flow result=40 12:29:52 Set A/D channel type result=40 12:29:52 Set A/D encoding result=40 12:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:52 Set channel filter=0.000000e+000 result=40 12:29:52 Config A/D Result=40 12:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:52 Get A/D filter: -9.255963e+061 result=40 12:29:52 Get A/D value=-858993460 result=40 12:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:52 Parameters OK 12:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:52 Set A/D data flow result=40 12:29:52 Set A/D channel type result=40 12:29:52 Set A/D encoding result=40 12:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:52 Set channel filter=0.000000e+000 result=40 12:29:52 Config A/D Result=40 12:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:52 Get A/D filter: -9.255963e+061 result=40 12:29:52 Get A/D value=-858993460 result=40 12:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:52 Aux= 12:29:52 Message to Camera, serial 116513 queued 12:30:29 Received message from Master: op=PointingHead serial=116526 12:30:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:30:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:30:30 Point started: ret=0 12:30:30 point_skyscan result=0 12:30:30 Check angles 12:30:30 SkyScan query 12:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0009 0009 12:30:31 Msec=0 True Az=112.995 Ze=-171.495 Az status=0009 Ze status=0009 12:30:31 Check angles 12:30:31 SkyScan query 12:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:30:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:30:32 Message to Master queued w/err=0: serial=116526 error=0 12:30:37 Received message from Master: op=Filter serial=116527 12:30:37 Color wheel filter change from 0 to 0 12:30:37 FLIGetFilterPos err=0 currentPosition=0 12:30:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:37 Filter is already there-color wheel unchanged 12:30:37 Received message from Master: op=Shutter serial=116528 12:30:37 Shutter LASER open 12:30:37 Received message from Camera: op=State serial=116530 12:30:37 GetSingleValue result=40 Value=cccccccc 12:30:37 SkyScan query 12:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:30:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:38 Parameters OK 12:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:38 Set A/D data flow result=40 12:30:38 Set A/D channel type result=40 12:30:38 Set A/D encoding result=40 12:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:38 Set channel filter=0.000000e+000 result=40 12:30:38 Config A/D Result=40 12:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:38 Get A/D filter: -9.255963e+061 result=40 12:30:38 Get A/D value=-858993460 result=40 12:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:38 Parameters OK 12:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:38 Set A/D data flow result=40 12:30:38 Set A/D channel type result=40 12:30:38 Set A/D encoding result=40 12:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:38 Set channel filter=0.000000e+000 result=40 12:30:38 Config A/D Result=40 12:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:38 Get A/D filter: -9.255963e+061 result=40 12:30:38 Get A/D value=-858993460 result=40 12:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:38 Aux= 12:30:38 Message to Camera, serial 116530 queued 12:30:46 Received message from Master: op=Shutter serial=116540 12:30:46 Shutter LASER close 12:30:47 Received message from Master: op=PointingHead serial=116544 12:30:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:30:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:30:47 Point started: ret=0 12:30:47 point_skyscan result=0 12:30:48 Check angles 12:30:48 SkyScan query 12:30:48 SkyScan query done: ret=0 az=136.14<-9076 ze=-142.965<-21531 Statuses=0009 0009 12:30:48 Msec=0 True Az=136.14 Ze=-142.965 Az status=0009 Ze status=0009 12:30:48 Check angles 12:30:48 SkyScan query 12:30:49 SkyScan query done: ret=0 az=153.66<-10244 ze=-121.995<-20133 Statuses=0009 0009 12:30:49 Msec=750 True Az=153.66 Ze=-121.995 Az status=0009 Ze status=0009 12:30:49 Check angles 12:30:49 SkyScan query 12:30:50 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.085<-18739 Statuses=0009 0009 12:30:50 Msec=1500 True Az=171.195 Ze=-101.085 Az status=0009 Ze status=0009 12:30:50 Check angles 12:30:50 SkyScan query 12:30:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.145<-17343 Statuses=0008 0009 12:30:51 Msec=2250 True Az=176.01 Ze=-80.145 Az status=0008 Ze status=0009 12:30:51 Check angles 12:30:51 SkyScan query 12:30:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.16<-15944 Statuses=0008 0009 12:30:51 Msec=3000 True Az=176.01 Ze=-59.16 Az status=0008 Ze status=0009 12:30:51 Check angles 12:30:51 SkyScan query 12:30:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:30:52 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:30:52 Message to Master queued w/err=0: serial=116544 error=0 12:30:57 Received message from Master: op=Filter serial=116545 12:30:57 Color wheel filter change from 0 to 0 12:30:57 FLIGetFilterPos err=0 currentPosition=0 12:30:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:57 Filter is already there-color wheel unchanged 12:30:57 Received message from Master: op=Shutter serial=116546 12:30:57 Shutter LASER close 12:30:57 Received message from Camera: op=State serial=116548 12:30:57 GetSingleValue result=40 Value=cccccccc 12:30:57 SkyScan query 12:30:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:30:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:58 Parameters OK 12:30:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:58 Set A/D data flow result=40 12:30:58 Set A/D channel type result=40 12:30:58 Set A/D encoding result=40 12:30:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:58 Set channel filter=0.000000e+000 result=40 12:30:58 Config A/D Result=40 12:30:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:58 Get A/D filter: -9.255963e+061 result=40 12:30:58 Get A/D value=-858993460 result=40 12:30:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:58 Parameters OK 12:30:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:58 Set A/D data flow result=40 12:30:58 Set A/D channel type result=40 12:30:58 Set A/D encoding result=40 12:30:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:58 Set channel filter=0.000000e+000 result=40 12:30:58 Config A/D Result=40 12:30:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:58 Get A/D filter: -9.255963e+061 result=40 12:30:58 Get A/D value=-858993460 result=40 12:30:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:58 Aux= 12:30:58 Message to Camera, serial 116548 queued 12:31:35 Received message from Master: op=PointingHead serial=116561 12:31:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:31:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:31:35 Point started: ret=0 12:31:35 point_skyscan result=0 12:31:36 Check angles 12:31:36 SkyScan query 12:31:37 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.3<-13420 Statuses=0009 0009 12:31:37 Msec=0 True Az=152.715 Ze=-21.3 Az status=0009 Ze status=0009 12:31:37 Check angles 12:31:37 SkyScan query 12:31:37 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.36<-12024 Statuses=0009 0009 12:31:37 Msec=750 True Az=135.12 Ze=-0.36 Az status=0009 Ze status=0009 12:31:37 Check angles 12:31:37 SkyScan query 12:31:38 SkyScan query done: ret=0 az=117.555<-7837 ze=20.58<-10628 Statuses=0009 0009 12:31:38 Msec=1500 True Az=117.555 Ze=20.58 Az status=0009 Ze status=0009 12:31:38 Check angles 12:31:38 SkyScan query 12:31:39 SkyScan query done: ret=0 az=100.305<-6687 ze=41.565<-9229 Statuses=0009 0009 12:31:39 Msec=2250 True Az=100.305 Ze=41.565 Az status=0009 Ze status=0009 12:31:39 Check angles 12:31:39 SkyScan query 12:31:40 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:31:40 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:31:40 Check angles 12:31:40 SkyScan query 12:31:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:31:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:31:40 Message to Master queued w/err=0: serial=116561 error=0 12:31:45 Received message from Master: op=Filter serial=116562 12:31:45 Color wheel filter change from 0 to 0 12:31:45 FLIGetFilterPos err=0 currentPosition=0 12:31:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:45 Filter is already there-color wheel unchanged 12:31:45 Received message from Master: op=Shutter serial=116563 12:31:45 Shutter LASER close 12:31:45 Received message from Camera: op=State serial=116565 12:31:45 GetSingleValue result=40 Value=cccccccc 12:31:45 SkyScan query 12:31:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:31:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:46 Parameters OK 12:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:46 Set A/D data flow result=40 12:31:46 Set A/D channel type result=40 12:31:46 Set A/D encoding result=40 12:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:46 Set channel filter=0.000000e+000 result=40 12:31:46 Config A/D Result=40 12:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:46 Get A/D filter: -9.255963e+061 result=40 12:31:46 Get A/D value=-858993460 result=40 12:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:46 Parameters OK 12:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:46 Set A/D data flow result=40 12:31:46 Set A/D channel type result=40 12:31:46 Set A/D encoding result=40 12:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:46 Set channel filter=0.000000e+000 result=40 12:31:46 Config A/D Result=40 12:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:46 Get A/D filter: -9.255963e+061 result=40 12:31:46 Get A/D value=-858993460 result=40 12:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:46 Aux= 12:31:46 Message to Camera, serial 116565 queued 12:32:23 Received message from Master: op=PointingHead serial=116578 12:32:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:32:23 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:32:23 Point started: ret=0 12:32:23 point_skyscan result=0 12:32:24 Check angles 12:32:24 SkyScan query 12:32:25 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 12:32:25 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 12:32:25 Check angles 12:32:25 SkyScan query 12:32:25 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 12:32:25 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 12:32:25 Check angles 12:32:25 SkyScan query 12:32:26 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 12:32:26 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 12:32:26 Check angles 12:32:26 SkyScan query 12:32:27 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 12:32:27 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 12:32:27 Check angles 12:32:27 SkyScan query 12:32:28 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:32:28 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:32:28 Check angles 12:32:28 SkyScan query 12:32:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:32:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:32:28 Message to Master queued w/err=0: serial=116578 error=0 12:32:33 Received message from Master: op=Filter serial=116579 12:32:33 Color wheel filter change from 0 to 0 12:32:33 FLIGetFilterPos err=0 currentPosition=0 12:32:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:33 Filter is already there-color wheel unchanged 12:32:33 Received message from Master: op=Shutter serial=116580 12:32:33 Shutter LASER close 12:32:34 Received message from Camera: op=State serial=116582 12:32:34 GetSingleValue result=40 Value=cccccccc 12:32:34 SkyScan query 12:32:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:32:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:34 Parameters OK 12:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:34 Set A/D data flow result=40 12:32:34 Set A/D channel type result=40 12:32:34 Set A/D encoding result=40 12:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:34 Set channel filter=0.000000e+000 result=40 12:32:34 Config A/D Result=40 12:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:34 Get A/D filter: -9.255963e+061 result=40 12:32:34 Get A/D value=-858993460 result=40 12:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:34 Parameters OK 12:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:34 Set A/D data flow result=40 12:32:34 Set A/D channel type result=40 12:32:34 Set A/D encoding result=40 12:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:34 Set channel filter=0.000000e+000 result=40 12:32:34 Config A/D Result=40 12:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:34 Get A/D filter: -9.255963e+061 result=40 12:32:34 Get A/D value=-858993460 result=40 12:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:34 Aux= 12:32:34 Message to Camera, serial 116582 queued 12:33:11 Received message from Master: op=PointingHead serial=116595 12:33:11 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:33:11 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:33:11 Point started: ret=0 12:33:11 point_skyscan result=0 12:33:12 Check angles 12:33:12 SkyScan query 12:33:13 SkyScan query done: ret=0 az=152.76<-10184 ze=8.37<-11442 Statuses=0009 0009 12:33:13 Msec=0 True Az=152.76 Ze=8.37 Az status=0009 Ze status=0009 12:33:13 Check angles 12:33:13 SkyScan query 12:33:13 SkyScan query done: ret=0 az=134.895<-8993 ze=-12.975<-12865 Statuses=0009 0009 12:33:13 Msec=750 True Az=134.895 Ze=-12.975 Az status=0009 Ze status=0009 12:33:14 Check angles 12:33:14 SkyScan query 12:33:14 SkyScan query done: ret=0 az=117.375<-7825 ze=-33.975<-14265 Statuses=0009 0009 12:33:14 Msec=1500 True Az=117.375 Ze=-33.975 Az status=0009 Ze status=0009 12:33:14 Check angles 12:33:14 SkyScan query 12:33:15 SkyScan query done: ret=0 az=99.99<-6666 ze=-51.555<-15437 Statuses=0009 0009 12:33:15 Msec=2250 True Az=99.99 Ze=-51.555 Az status=0009 Ze status=0009 12:33:15 Check angles 12:33:15 SkyScan query 12:33:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 12:33:16 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 12:33:16 Check angles 12:33:16 SkyScan query 12:33:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:33:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:33:16 Message to Master queued w/err=0: serial=116595 error=0 12:33:21 Received message from Master: op=Filter serial=116596 12:33:21 Color wheel filter change from 0 to 0 12:33:21 FLIGetFilterPos err=0 currentPosition=0 12:33:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:21 Filter is already there-color wheel unchanged 12:33:22 Received message from Master: op=Shutter serial=116597 12:33:22 Shutter LASER close 12:33:22 Received message from Camera: op=State serial=116599 12:33:22 GetSingleValue result=40 Value=cccccccc 12:33:22 SkyScan query 12:33:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:33:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:22 Parameters OK 12:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:22 Set A/D data flow result=40 12:33:22 Set A/D channel type result=40 12:33:22 Set A/D encoding result=40 12:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:22 Set channel filter=0.000000e+000 result=40 12:33:22 Config A/D Result=40 12:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:22 Get A/D filter: -9.255963e+061 result=40 12:33:22 Get A/D value=-858993460 result=40 12:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:22 Parameters OK 12:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:22 Set A/D data flow result=40 12:33:22 Set A/D channel type result=40 12:33:22 Set A/D encoding result=40 12:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:22 Set channel filter=0.000000e+000 result=40 12:33:22 Config A/D Result=40 12:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:22 Get A/D filter: -9.255963e+061 result=40 12:33:22 Get A/D value=-858993460 result=40 12:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:22 Aux= 12:33:22 Message to Camera, serial 116599 queued 12:33:59 Received message from Master: op=PointingHead serial=116612 12:33:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:33:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:33:59 Point started: ret=0 12:33:59 point_skyscan result=0 12:34:00 Check angles 12:34:00 SkyScan query 12:34:01 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.6<-17440 Statuses=0009 0009 12:34:01 Msec=0 True Az=109.335 Ze=-81.6 Az status=0009 Ze status=0009 12:34:01 Check angles 12:34:01 SkyScan query 12:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 12:34:02 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 12:34:02 Check angles 12:34:02 SkyScan query 12:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 12:34:02 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 12:34:02 Check angles 12:34:02 SkyScan query 12:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.45<-21630 Statuses=0008 0009 12:34:03 Msec=2250 True Az=112.995 Ze=-144.45 Az status=0008 Ze status=0009 12:34:03 Check angles 12:34:03 SkyScan query 12:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 12:34:04 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 12:34:04 Check angles 12:34:04 SkyScan query 12:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:34:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:34:05 Message to Master queued w/err=0: serial=116612 error=0 12:34:10 Received message from Master: op=Filter serial=116613 12:34:10 Color wheel filter change from 0 to 0 12:34:10 FLIGetFilterPos err=0 currentPosition=0 12:34:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:10 Filter is already there-color wheel unchanged 12:34:10 Received message from Master: op=Shutter serial=116614 12:34:10 Shutter LASER open 12:34:10 Received message from Camera: op=State serial=116616 12:34:10 GetSingleValue result=40 Value=cccccccc 12:34:10 SkyScan query 12:34:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:34:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:11 Parameters OK 12:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:11 Set A/D data flow result=40 12:34:11 Set A/D channel type result=40 12:34:11 Set A/D encoding result=40 12:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:11 Set channel filter=0.000000e+000 result=40 12:34:11 Config A/D Result=40 12:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:11 Get A/D filter: -9.255963e+061 result=40 12:34:11 Get A/D value=-858993460 result=40 12:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:11 Parameters OK 12:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:11 Set A/D data flow result=40 12:34:11 Set A/D channel type result=40 12:34:11 Set A/D encoding result=40 12:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:11 Set channel filter=0.000000e+000 result=40 12:34:11 Config A/D Result=40 12:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:11 Get A/D filter: -9.255963e+061 result=40 12:34:11 Get A/D value=-858993460 result=40 12:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:11 Aux= 12:34:11 Message to Camera, serial 116616 queued 12:34:19 Received message from Master: op=Shutter serial=116626 12:34:19 Shutter LASER close 12:34:19 Received message from Master: op=PointingHead serial=116630 12:34:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:34:19 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:34:20 Point started: ret=0 12:34:20 point_skyscan result=0 12:34:20 Check angles 12:34:20 SkyScan query 12:34:21 SkyScan query done: ret=0 az=90.015<-6001 ze=157.395<-1507 Statuses=0009 0009 12:34:21 Msec=0 True Az=90.015 Ze=157.395 Az status=0009 Ze status=0009 12:34:21 Check angles 12:34:21 SkyScan query 12:34:22 SkyScan query done: ret=0 az=72.615<-4841 ze=136.41<-2906 Statuses=0009 0009 12:34:22 Msec=750 True Az=72.615 Ze=136.41 Az status=0009 Ze status=0009 12:34:22 Check angles 12:34:22 SkyScan query 12:34:23 SkyScan query done: ret=0 az=55.08<-3672 ze=115.515<-4299 Statuses=0009 0009 12:34:23 Msec=1500 True Az=55.08 Ze=115.515 Az status=0009 Ze status=0009 12:34:23 Check angles 12:34:23 SkyScan query 12:34:23 SkyScan query done: ret=0 az=40.965<-2731 ze=94.5<-5700 Statuses=0009 0009 12:34:23 Msec=2250 True Az=40.965 Ze=94.5 Az status=0009 Ze status=0009 12:34:23 Check angles 12:34:23 SkyScan query 12:34:24 SkyScan query done: ret=0 az=40.995<-2733 ze=73.575<-7095 Statuses=0008 0009 12:34:24 Msec=3000 True Az=40.995 Ze=73.575 Az status=0008 Ze status=0009 12:34:24 Check angles 12:34:24 SkyScan query 12:34:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.935<-8471 Statuses=0008 0009 12:34:25 Msec=3750 True Az=40.995 Ze=52.935 Az status=0008 Ze status=0009 12:34:25 Check angles 12:34:25 SkyScan query 12:34:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:34:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:34:26 Message to Master queued w/err=0: serial=116630 error=0 12:34:31 Received message from Master: op=Filter serial=116631 12:34:31 Color wheel filter change from 0 to 0 12:34:31 FLIGetFilterPos err=0 currentPosition=0 12:34:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:31 Filter is already there-color wheel unchanged 12:34:31 Received message from Master: op=Shutter serial=116632 12:34:31 Shutter LASER close 12:34:31 Received message from Camera: op=State serial=116634 12:34:31 GetSingleValue result=40 Value=cccccccc 12:34:31 SkyScan query 12:34:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:34:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:31 Parameters OK 12:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:31 Set A/D data flow result=40 12:34:31 Set A/D channel type result=40 12:34:31 Set A/D encoding result=40 12:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:31 Set channel filter=0.000000e+000 result=40 12:34:31 Config A/D Result=40 12:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:31 Get A/D filter: -9.255963e+061 result=40 12:34:31 Get A/D value=-858993460 result=40 12:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:31 Parameters OK 12:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:31 Set A/D data flow result=40 12:34:31 Set A/D channel type result=40 12:34:31 Set A/D encoding result=40 12:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:31 Set channel filter=0.000000e+000 result=40 12:34:31 Config A/D Result=40 12:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:31 Get A/D filter: -9.255963e+061 result=40 12:34:31 Get A/D value=-858993460 result=40 12:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:31 Aux= 12:34:31 Message to Camera, serial 116634 queued 12:35:08 Received message from Master: op=PointingHead serial=116647 12:35:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:35:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:35:09 Point started: ret=0 12:35:09 point_skyscan result=0 12:35:09 Check angles 12:35:09 SkyScan query 12:35:10 SkyScan query done: ret=0 az=64.245<-4283 ze=66.555<-7563 Statuses=0009 0008 12:35:10 Msec=0 True Az=64.245 Ze=66.555 Az status=0009 Ze status=0008 12:35:10 Check angles 12:35:10 SkyScan query 12:35:11 SkyScan query done: ret=0 az=81.765<-5451 ze=66.495<-7567 Statuses=0009 0008 12:35:11 Msec=750 True Az=81.765 Ze=66.495 Az status=0009 Ze status=0008 12:35:11 Check angles 12:35:11 SkyScan query 12:35:12 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 12:35:12 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 12:35:12 Check angles 12:35:12 SkyScan query 12:35:12 SkyScan query done: ret=0 az=116.745<-7783 ze=66.495<-7567 Statuses=0009 0008 12:35:12 Msec=2250 True Az=116.745 Ze=66.495 Az status=0009 Ze status=0008 12:35:12 Check angles 12:35:12 SkyScan query 12:35:13 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 12:35:13 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 12:35:13 Check angles 12:35:13 SkyScan query 12:35:14 SkyScan query done: ret=0 az=151.575<-10105 ze=66.495<-7567 Statuses=0009 0008 12:35:14 Msec=3750 True Az=151.575 Ze=66.495 Az status=0009 Ze status=0008 12:35:14 Check angles 12:35:14 SkyScan query 12:35:15 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:35:15 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:35:15 Message to Master queued w/err=0: serial=116647 error=0 12:35:20 Received message from Master: op=Filter serial=116648 12:35:20 Color wheel filter change from 0 to 0 12:35:20 FLIGetFilterPos err=0 currentPosition=0 12:35:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:20 Filter is already there-color wheel unchanged 12:35:20 Received message from Master: op=Shutter serial=116649 12:35:20 Shutter LASER close 12:35:20 Received message from Camera: op=State serial=116651 12:35:20 GetSingleValue result=40 Value=cccccccc 12:35:20 SkyScan query 12:35:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:20 Parameters OK 12:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:20 Set A/D data flow result=40 12:35:20 Set A/D channel type result=40 12:35:20 Set A/D encoding result=40 12:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:20 Set channel filter=0.000000e+000 result=40 12:35:20 Config A/D Result=40 12:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:20 Get A/D filter: -9.255963e+061 result=40 12:35:20 Get A/D value=-858993460 result=40 12:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:20 Parameters OK 12:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:20 Set A/D data flow result=40 12:35:20 Set A/D channel type result=40 12:35:20 Set A/D encoding result=40 12:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:20 Set channel filter=0.000000e+000 result=40 12:35:20 Config A/D Result=40 12:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:20 Get A/D filter: -9.255963e+061 result=40 12:35:20 Get A/D value=-858993460 result=40 12:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:20 Aux= 12:35:20 Message to Camera, serial 116651 queued [UTC 2018-12-13 12:35:52] 12:35:57 Received message from Master: op=PointingHead serial=116664 12:35:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:35:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:35:57 Point started: ret=0 12:35:57 point_skyscan result=0 12:35:58 Check angles 12:35:58 SkyScan query 12:35:59 SkyScan query done: ret=0 az=135.105<-9007 ze=36.855<-9543 Statuses=0009 0009 12:35:59 Msec=0 True Az=135.105 Ze=36.855 Az status=0009 Ze status=0009 12:35:59 Check angles 12:35:59 SkyScan query 12:36:00 SkyScan query done: ret=0 az=117.63<-7842 ze=15.93<-10938 Statuses=0009 0009 12:36:00 Msec=750 True Az=117.63 Ze=15.93 Az status=0009 Ze status=0009 12:36:00 Check angles 12:36:00 SkyScan query 12:36:00 SkyScan query done: ret=0 az=100.245<-6683 ze=-5.04<-12336 Statuses=0009 0009 12:36:00 Msec=1500 True Az=100.245 Ze=-5.04 Az status=0009 Ze status=0009 12:36:00 Check angles 12:36:00 SkyScan query 12:36:01 SkyScan query done: ret=0 az=82.74<-5516 ze=-26.01<-13734 Statuses=0009 0009 12:36:01 Msec=2250 True Az=82.74 Ze=-26.01 Az status=0009 Ze status=0009 12:36:01 Check angles 12:36:01 SkyScan query 12:36:02 SkyScan query done: ret=0 az=65.28<-4352 ze=-38.58<-14572 Statuses=0009 0008 12:36:02 Msec=3000 True Az=65.28 Ze=-38.58 Az status=0009 Ze status=0008 12:36:02 Check angles 12:36:02 SkyScan query 12:36:03 SkyScan query done: ret=0 az=47.805<-3187 ze=-38.52<-14568 Statuses=0009 0008 12:36:03 Msec=3750 True Az=47.805 Ze=-38.52 Az status=0009 Ze status=0008 12:36:03 Check angles 12:36:03 SkyScan query 12:36:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:36:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:36:03 Message to Master queued w/err=0: serial=116664 error=0 12:36:08 Received message from Master: op=Filter serial=116665 12:36:08 Color wheel filter change from 0 to 0 12:36:08 FLIGetFilterPos err=0 currentPosition=0 12:36:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:08 Filter is already there-color wheel unchanged 12:36:08 Received message from Master: op=Shutter serial=116666 12:36:08 Shutter LASER close 12:36:09 Received message from Camera: op=State serial=116668 12:36:09 GetSingleValue result=40 Value=cccccccc 12:36:09 SkyScan query 12:36:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:36:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:09 Parameters OK 12:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:09 Set A/D data flow result=40 12:36:09 Set A/D channel type result=40 12:36:09 Set A/D encoding result=40 12:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:09 Set channel filter=0.000000e+000 result=40 12:36:09 Config A/D Result=40 12:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:09 Get A/D filter: -9.255963e+061 result=40 12:36:09 Get A/D value=-858993460 result=40 12:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:09 Parameters OK 12:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:09 Set A/D data flow result=40 12:36:09 Set A/D channel type result=40 12:36:09 Set A/D encoding result=40 12:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:09 Set channel filter=0.000000e+000 result=40 12:36:09 Config A/D Result=40 12:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:09 Get A/D filter: -9.255963e+061 result=40 12:36:09 Get A/D value=-858993460 result=40 12:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:09 Aux= 12:36:09 Message to Camera, serial 116668 queued 12:36:46 Received message from Master: op=PointingHead serial=116681 12:36:46 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:36:46 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:36:46 Point started: ret=0 12:36:46 point_skyscan result=0 12:36:47 Check angles 12:36:47 SkyScan query 12:36:48 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.76<-16584 Statuses=0009 0009 12:36:48 Msec=0 True Az=64.41 Ze=-68.76 Az status=0009 Ze status=0009 12:36:48 Check angles 12:36:48 SkyScan query 12:36:48 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.715<-17981 Statuses=0009 0009 12:36:48 Msec=750 True Az=81.885 Ze=-89.715 Az status=0009 Ze status=0009 12:36:49 Check angles 12:36:49 SkyScan query 12:36:49 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.685<-19379 Statuses=0009 0009 12:36:49 Msec=1500 True Az=99.33 Ze=-110.685 Az status=0009 Ze status=0009 12:36:49 Check angles 12:36:49 SkyScan query 12:36:50 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.595<-20773 Statuses=0009 0009 12:36:50 Msec=2250 True Az=116.775 Ze=-131.595 Az status=0009 Ze status=0009 12:36:50 Check angles 12:36:50 SkyScan query 12:36:51 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 12:36:51 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 12:36:51 Check angles 12:36:51 SkyScan query 12:36:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 12:36:51 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 12:36:51 Message to Master queued w/err=0: serial=116681 error=0 12:36:56 Received message from Master: op=Filter serial=116682 12:36:56 Color wheel filter change from 0 to 0 12:36:56 FLIGetFilterPos err=0 currentPosition=0 12:36:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:56 Filter is already there-color wheel unchanged 12:36:57 Received message from Master: op=Shutter serial=116683 12:36:57 Shutter LASER close 12:36:57 Received message from Camera: op=State serial=116685 12:36:57 GetSingleValue result=40 Value=cccccccc 12:36:57 SkyScan query 12:36:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:36:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:57 Parameters OK 12:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:57 Set A/D data flow result=40 12:36:57 Set A/D channel type result=40 12:36:57 Set A/D encoding result=40 12:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:57 Set channel filter=0.000000e+000 result=40 12:36:57 Config A/D Result=40 12:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:57 Get A/D filter: -9.255963e+061 result=40 12:36:57 Get A/D value=-858993460 result=40 12:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:57 Parameters OK 12:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:57 Set A/D data flow result=40 12:36:57 Set A/D channel type result=40 12:36:57 Set A/D encoding result=40 12:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:57 Set channel filter=0.000000e+000 result=40 12:36:57 Config A/D Result=40 12:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:57 Get A/D filter: -9.255963e+061 result=40 12:36:57 Get A/D value=-858993460 result=40 12:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:57 Aux= 12:36:57 Message to Camera, serial 116685 queued 12:37:34 Received message from Master: op=PointingHead serial=116698 12:37:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:37:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:37:34 Point started: ret=0 12:37:34 point_skyscan result=0 12:37:35 Check angles 12:37:35 SkyScan query 12:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 12:37:36 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 12:37:36 Check angles 12:37:36 SkyScan query 12:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:37:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:37:36 Message to Master queued w/err=0: serial=116698 error=0 12:37:41 Received message from Master: op=Filter serial=116699 12:37:41 Color wheel filter change from 0 to 0 12:37:41 FLIGetFilterPos err=0 currentPosition=0 12:37:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:41 Filter is already there-color wheel unchanged 12:37:42 Received message from Master: op=Shutter serial=116700 12:37:42 Shutter LASER open 12:37:42 Received message from Camera: op=State serial=116702 12:37:42 GetSingleValue result=40 Value=cccccccc 12:37:42 SkyScan query 12:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:37:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:42 Parameters OK 12:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:42 Set A/D data flow result=40 12:37:42 Set A/D channel type result=40 12:37:42 Set A/D encoding result=40 12:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:42 Set channel filter=0.000000e+000 result=40 12:37:42 Config A/D Result=40 12:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:42 Get A/D filter: -9.255963e+061 result=40 12:37:42 Get A/D value=-858993460 result=40 12:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:42 Parameters OK 12:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:42 Set A/D data flow result=40 12:37:42 Set A/D channel type result=40 12:37:42 Set A/D encoding result=40 12:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:42 Set channel filter=0.000000e+000 result=40 12:37:42 Config A/D Result=40 12:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:42 Get A/D filter: -9.255963e+061 result=40 12:37:42 Get A/D value=-858993460 result=40 12:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:42 Aux= 12:37:42 Message to Camera, serial 116702 queued 12:37:50 Received message from Master: op=Shutter serial=116711 12:37:50 Shutter LASER close 12:37:50 Received message from Master: op=PointingHead serial=116715 12:37:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:37:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:37:51 Point started: ret=0 12:37:51 point_skyscan result=0 12:37:52 Check angles 12:37:52 SkyScan query 12:37:52 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.71<-21514 Statuses=0009 0009 12:37:52 Msec=0 True Az=136.425 Ze=-142.71 Az status=0009 Ze status=0009 12:37:52 Check angles 12:37:52 SkyScan query 12:37:53 SkyScan query done: ret=0 az=154.26<-10284 ze=-121.335<-20089 Statuses=0009 0009 12:37:53 Msec=750 True Az=154.26 Ze=-121.335 Az status=0009 Ze status=0009 12:37:53 Check angles 12:37:53 SkyScan query 12:37:54 SkyScan query done: ret=0 az=171.735<-11449 ze=-100.305<-18687 Statuses=0009 0009 12:37:54 Msec=1500 True Az=171.735 Ze=-100.305 Az status=0009 Ze status=0009 12:37:54 Check angles 12:37:54 SkyScan query 12:37:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 12:37:54 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 12:37:55 Check angles 12:37:55 SkyScan query 12:37:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.005<-15867 Statuses=0008 0009 12:37:55 Msec=3000 True Az=176.01 Ze=-58.005 Az status=0008 Ze status=0009 12:37:55 Check angles 12:37:55 SkyScan query 12:37:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 12:37:56 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 12:37:56 Message to Master queued w/err=0: serial=116715 error=0 12:38:01 Received message from Master: op=Filter serial=116716 12:38:01 Color wheel filter change from 0 to 0 12:38:01 FLIGetFilterPos err=0 currentPosition=0 12:38:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:01 Filter is already there-color wheel unchanged 12:38:01 Received message from Master: op=Shutter serial=116717 12:38:01 Shutter LASER close 12:38:01 Received message from Camera: op=State serial=116719 12:38:01 GetSingleValue result=40 Value=cccccccc 12:38:01 SkyScan query 12:38:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:38:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:02 Parameters OK 12:38:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:02 Set A/D data flow result=40 12:38:02 Set A/D channel type result=40 12:38:02 Set A/D encoding result=40 12:38:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:02 Set channel filter=0.000000e+000 result=40 12:38:02 Config A/D Result=40 12:38:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:02 Get A/D filter: -9.255963e+061 result=40 12:38:02 Get A/D value=-858993460 result=40 12:38:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:02 Parameters OK 12:38:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:02 Set A/D data flow result=40 12:38:02 Set A/D channel type result=40 12:38:02 Set A/D encoding result=40 12:38:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:02 Set channel filter=0.000000e+000 result=40 12:38:02 Config A/D Result=40 12:38:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:02 Get A/D filter: -9.255963e+061 result=40 12:38:02 Get A/D value=-858993460 result=40 12:38:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:02 Aux= 12:38:02 Message to Camera, serial 116719 queued 12:38:39 Received message from Master: op=PointingHead serial=116732 12:38:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:38:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:38:39 Point started: ret=0 12:38:39 point_skyscan result=0 12:38:40 Check angles 12:38:40 SkyScan query 12:38:40 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.915<-13461 Statuses=0009 0009 12:38:40 Msec=0 True Az=153.165 Ze=-21.915 Az status=0009 Ze status=0009 12:38:41 Check angles 12:38:41 SkyScan query 12:38:41 SkyScan query done: ret=0 az=135.285<-9019 ze=-0.54<-12036 Statuses=0009 0009 12:38:41 Msec=750 True Az=135.285 Ze=-0.54 Az status=0009 Ze status=0009 12:38:41 Check angles 12:38:41 SkyScan query 12:38:42 SkyScan query done: ret=0 az=117.735<-7849 ze=20.4<-10640 Statuses=0009 0009 12:38:42 Msec=1500 True Az=117.735 Ze=20.4 Az status=0009 Ze status=0009 12:38:42 Check angles 12:38:42 SkyScan query 12:38:43 SkyScan query done: ret=0 az=100.38<-6692 ze=41.385<-9241 Statuses=0009 0009 12:38:43 Msec=2250 True Az=100.38 Ze=41.385 Az status=0009 Ze status=0009 12:38:43 Check angles 12:38:43 SkyScan query 12:38:43 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:38:43 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:38:44 Check angles 12:38:44 SkyScan query 12:38:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:38:44 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:38:44 Message to Master queued w/err=0: serial=116732 error=0 12:38:49 Received message from Master: op=Filter serial=116733 12:38:49 Color wheel filter change from 0 to 0 12:38:49 FLIGetFilterPos err=0 currentPosition=0 12:38:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:49 Filter is already there-color wheel unchanged 12:38:49 Received message from Master: op=Shutter serial=116734 12:38:49 Shutter LASER close 12:38:49 Received message from Camera: op=State serial=116736 12:38:49 GetSingleValue result=40 Value=cccccccc 12:38:49 SkyScan query 12:38:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:38:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:50 Parameters OK 12:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:50 Set A/D data flow result=40 12:38:50 Set A/D channel type result=40 12:38:50 Set A/D encoding result=40 12:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:50 Set channel filter=0.000000e+000 result=40 12:38:50 Config A/D Result=40 12:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:50 Get A/D filter: -9.255963e+061 result=40 12:38:50 Get A/D value=-858993460 result=40 12:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:50 Parameters OK 12:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:50 Set A/D data flow result=40 12:38:50 Set A/D channel type result=40 12:38:50 Set A/D encoding result=40 12:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:50 Set channel filter=0.000000e+000 result=40 12:38:50 Config A/D Result=40 12:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:50 Get A/D filter: -9.255963e+061 result=40 12:38:50 Get A/D value=-858993460 result=40 12:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:50 Aux= 12:38:50 Message to Camera, serial 116736 queued 12:39:27 Received message from Master: op=PointingHead serial=116749 12:39:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:39:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:39:27 Point started: ret=0 12:39:27 point_skyscan result=0 12:39:28 Check angles 12:39:28 SkyScan query 12:39:28 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 12:39:28 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 12:39:29 Check angles 12:39:29 SkyScan query 12:39:29 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 12:39:29 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 12:39:29 Check angles 12:39:29 SkyScan query 12:39:30 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 12:39:30 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 12:39:30 Check angles 12:39:30 SkyScan query 12:39:31 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 12:39:31 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 12:39:31 Check angles 12:39:31 SkyScan query 12:39:31 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:39:31 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:39:32 Check angles 12:39:32 SkyScan query 12:39:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:39:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:39:32 Message to Master queued w/err=0: serial=116749 error=0 12:39:37 Received message from Master: op=Filter serial=116750 12:39:37 Color wheel filter change from 0 to 0 12:39:37 FLIGetFilterPos err=0 currentPosition=0 12:39:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:37 Filter is already there-color wheel unchanged 12:39:37 Received message from Master: op=Shutter serial=116751 12:39:37 Shutter LASER close 12:39:37 Received message from Camera: op=State serial=116753 12:39:37 GetSingleValue result=40 Value=cccccccc 12:39:37 SkyScan query 12:39:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:39:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:38 Parameters OK 12:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:38 Set A/D data flow result=40 12:39:38 Set A/D channel type result=40 12:39:38 Set A/D encoding result=40 12:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:38 Set channel filter=0.000000e+000 result=40 12:39:38 Config A/D Result=40 12:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:38 Get A/D filter: -9.255963e+061 result=40 12:39:38 Get A/D value=-858993460 result=40 12:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:38 Parameters OK 12:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:38 Set A/D data flow result=40 12:39:38 Set A/D channel type result=40 12:39:38 Set A/D encoding result=40 12:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:38 Set channel filter=0.000000e+000 result=40 12:39:38 Config A/D Result=40 12:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:38 Get A/D filter: -9.255963e+061 result=40 12:39:38 Get A/D value=-858993460 result=40 12:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:38 Aux= 12:39:38 Message to Camera, serial 116753 queued 12:40:15 Received message from Master: op=PointingHead serial=116766 12:40:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:40:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:40:15 Point started: ret=0 12:40:15 point_skyscan result=0 12:40:16 Check angles 12:40:16 SkyScan query 12:40:17 SkyScan query done: ret=0 az=152.985<-10199 ze=8.685<-11421 Statuses=0009 0009 12:40:17 Msec=0 True Az=152.985 Ze=8.685 Az status=0009 Ze status=0009 12:40:17 Check angles 12:40:17 SkyScan query 12:40:17 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.27<-12818 Statuses=0009 0009 12:40:17 Msec=750 True Az=135.435 Ze=-12.27 Az status=0009 Ze status=0009 12:40:17 Check angles 12:40:17 SkyScan query 12:40:18 SkyScan query done: ret=0 az=118.035<-7869 ze=-33.21<-14214 Statuses=0009 0009 12:40:18 Msec=1500 True Az=118.035 Ze=-33.21 Az status=0009 Ze status=0009 12:40:18 Check angles 12:40:18 SkyScan query 12:40:19 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.525<-15435 Statuses=0009 0009 12:40:19 Msec=2250 True Az=100.62 Ze=-51.525 Az status=0009 Ze status=0009 12:40:19 Check angles 12:40:19 SkyScan query 12:40:20 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:40:20 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:40:20 Check angles 12:40:20 SkyScan query 12:40:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:40:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:40:20 Message to Master queued w/err=0: serial=116766 error=0 12:40:25 Received message from Master: op=Filter serial=116767 12:40:25 Color wheel filter change from 0 to 0 12:40:25 FLIGetFilterPos err=0 currentPosition=0 12:40:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:25 Filter is already there-color wheel unchanged 12:40:25 Received message from Master: op=Shutter serial=116768 12:40:25 Shutter LASER close 12:40:26 Received message from Camera: op=State serial=116770 12:40:26 GetSingleValue result=40 Value=cccccccc 12:40:26 SkyScan query 12:40:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:40:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:26 Parameters OK 12:40:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:26 Set A/D data flow result=40 12:40:26 Set A/D channel type result=40 12:40:26 Set A/D encoding result=40 12:40:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:26 Set channel filter=0.000000e+000 result=40 12:40:26 Config A/D Result=40 12:40:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:26 Get A/D filter: -9.255963e+061 result=40 12:40:26 Get A/D value=-858993460 result=40 12:40:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:26 Parameters OK 12:40:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:26 Set A/D data flow result=40 12:40:26 Set A/D channel type result=40 12:40:26 Set A/D encoding result=40 12:40:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:26 Set channel filter=0.000000e+000 result=40 12:40:26 Config A/D Result=40 12:40:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:26 Get A/D filter: -9.255963e+061 result=40 12:40:26 Get A/D value=-858993460 result=40 12:40:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:26 Aux= 12:40:26 Message to Camera, serial 116770 queued 12:41:03 Received message from Master: op=PointingHead serial=116783 12:41:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:41:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:41:03 Point started: ret=0 12:41:03 point_skyscan result=0 12:41:04 Check angles 12:41:04 SkyScan query 12:41:05 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.225<-17415 Statuses=0009 0009 12:41:05 Msec=0 True Az=109.005 Ze=-81.225 Az status=0009 Ze status=0009 12:41:05 Check angles 12:41:05 SkyScan query 12:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 12:41:05 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 12:41:06 Check angles 12:41:06 SkyScan query 12:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.57<-20238 Statuses=0008 0009 12:41:06 Msec=1500 True Az=112.995 Ze=-123.57 Az status=0008 Ze status=0009 12:41:06 Check angles 12:41:06 SkyScan query 12:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 12:41:07 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 12:41:07 Check angles 12:41:07 SkyScan query 12:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 12:41:08 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 12:41:08 Check angles 12:41:08 SkyScan query 12:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:41:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:41:08 Message to Master queued w/err=0: serial=116783 error=0 12:41:13 Received message from Master: op=Filter serial=116784 12:41:13 Color wheel filter change from 0 to 0 12:41:13 FLIGetFilterPos err=0 currentPosition=0 12:41:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:13 Filter is already there-color wheel unchanged 12:41:14 Received message from Master: op=Shutter serial=116785 12:41:14 Shutter LASER open 12:41:14 Received message from Camera: op=State serial=116787 12:41:14 GetSingleValue result=40 Value=cccccccc 12:41:14 SkyScan query 12:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:41:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:14 Parameters OK 12:41:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:14 Set A/D data flow result=40 12:41:14 Set A/D channel type result=40 12:41:14 Set A/D encoding result=40 12:41:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:14 Set channel filter=0.000000e+000 result=40 12:41:14 Config A/D Result=40 12:41:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:14 Get A/D filter: -9.255963e+061 result=40 12:41:14 Get A/D value=-858993460 result=40 12:41:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:14 Parameters OK 12:41:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:14 Set A/D data flow result=40 12:41:14 Set A/D channel type result=40 12:41:14 Set A/D encoding result=40 12:41:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:14 Set channel filter=0.000000e+000 result=40 12:41:14 Config A/D Result=40 12:41:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:14 Get A/D filter: -9.255963e+061 result=40 12:41:14 Get A/D value=-858993460 result=40 12:41:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:14 Aux= 12:41:14 Message to Camera, serial 116787 queued 12:41:23 Received message from Master: op=Shutter serial=116797 12:41:23 Shutter LASER close 12:41:23 Received message from Master: op=PointingHead serial=116801 12:41:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:41:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:41:24 Point started: ret=0 12:41:24 point_skyscan result=0 12:41:24 Check angles 12:41:24 SkyScan query 12:41:25 SkyScan query done: ret=0 az=89.595<-5973 ze=156.855<-1543 Statuses=0009 0009 12:41:25 Msec=0 True Az=89.595 Ze=156.855 Az status=0009 Ze status=0009 12:41:25 Check angles 12:41:25 SkyScan query 12:41:26 SkyScan query done: ret=0 az=72.045<-4803 ze=135.9<-2940 Statuses=0009 0009 12:41:26 Msec=750 True Az=72.045 Ze=135.9 Az status=0009 Ze status=0009 12:41:26 Check angles 12:41:26 SkyScan query 12:41:26 SkyScan query done: ret=0 az=54.765<-3651 ze=114.96<-4336 Statuses=0009 0009 12:41:26 Msec=1500 True Az=54.765 Ze=114.96 Az status=0009 Ze status=0009 12:41:27 Check angles 12:41:27 SkyScan query 12:41:27 SkyScan query done: ret=0 az=40.935<-2729 ze=93.99<-5734 Statuses=0009 0009 12:41:27 Msec=2250 True Az=40.935 Ze=93.99 Az status=0009 Ze status=0009 12:41:27 Check angles 12:41:27 SkyScan query 12:41:28 SkyScan query done: ret=0 az=40.995<-2733 ze=72.99<-7134 Statuses=0008 0009 12:41:28 Msec=3000 True Az=40.995 Ze=72.99 Az status=0008 Ze status=0009 12:41:28 Check angles 12:41:28 SkyScan query 12:41:29 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 12:41:29 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 12:41:29 Check angles 12:41:29 SkyScan query 12:41:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:41:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:41:29 Message to Master queued w/err=0: serial=116801 error=0 12:41:34 Received message from Master: op=Filter serial=116802 12:41:34 Color wheel filter change from 0 to 0 12:41:34 FLIGetFilterPos err=0 currentPosition=0 12:41:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:34 Filter is already there-color wheel unchanged 12:41:35 Received message from Master: op=Shutter serial=116803 12:41:35 Shutter LASER close 12:41:35 Received message from Camera: op=State serial=116805 12:41:35 GetSingleValue result=40 Value=cccccccc 12:41:35 SkyScan query 12:41:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:41:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:35 Parameters OK 12:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:35 Set A/D data flow result=40 12:41:35 Set A/D channel type result=40 12:41:35 Set A/D encoding result=40 12:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:35 Set channel filter=0.000000e+000 result=40 12:41:35 Config A/D Result=40 12:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:35 Get A/D filter: -9.255963e+061 result=40 12:41:35 Get A/D value=-858993460 result=40 12:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:35 Parameters OK 12:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:35 Set A/D data flow result=40 12:41:35 Set A/D channel type result=40 12:41:35 Set A/D encoding result=40 12:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:35 Set channel filter=0.000000e+000 result=40 12:41:35 Config A/D Result=40 12:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:35 Get A/D filter: -9.255963e+061 result=40 12:41:35 Get A/D value=-858993460 result=40 12:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:35 Aux= 12:41:35 Message to Camera, serial 116805 queued 12:42:12 Received message from Master: op=PointingHead serial=116818 12:42:12 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:42:12 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:42:13 Point started: ret=0 12:42:13 point_skyscan result=0 12:42:13 Check angles 12:42:13 SkyScan query 12:42:14 SkyScan query done: ret=0 az=64.23<-4282 ze=66.54<-7564 Statuses=0009 0008 12:42:14 Msec=0 True Az=64.23 Ze=66.54 Az status=0009 Ze status=0008 12:42:14 Check angles 12:42:14 SkyScan query 12:42:15 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 12:42:15 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 12:42:15 Check angles 12:42:15 SkyScan query 12:42:15 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 12:42:15 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 12:42:16 Check angles 12:42:16 SkyScan query 12:42:16 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 12:42:16 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 12:42:16 Check angles 12:42:16 SkyScan query 12:42:17 SkyScan query done: ret=0 az=134.505<-8967 ze=66.495<-7567 Statuses=0009 0008 12:42:17 Msec=3000 True Az=134.505 Ze=66.495 Az status=0009 Ze status=0008 12:42:17 Check angles 12:42:17 SkyScan query 12:42:18 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 12:42:18 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 12:42:18 Check angles 12:42:18 SkyScan query 12:42:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:42:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:42:18 Message to Master queued w/err=0: serial=116818 error=0 12:42:23 Received message from Master: op=Filter serial=116819 12:42:23 Color wheel filter change from 0 to 0 12:42:23 FLIGetFilterPos err=0 currentPosition=0 12:42:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:23 Filter is already there-color wheel unchanged 12:42:24 Received message from Master: op=Shutter serial=116820 12:42:24 Shutter LASER close 12:42:24 Received message from Camera: op=State serial=116822 12:42:24 GetSingleValue result=40 Value=cccccccc 12:42:24 SkyScan query 12:42:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:42:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:24 Parameters OK 12:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:24 Set A/D data flow result=40 12:42:24 Set A/D channel type result=40 12:42:24 Set A/D encoding result=40 12:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:24 Set channel filter=0.000000e+000 result=40 12:42:24 Config A/D Result=40 12:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:24 Get A/D filter: -9.255963e+061 result=40 12:42:24 Get A/D value=-858993460 result=40 12:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:24 Parameters OK 12:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:24 Set A/D data flow result=40 12:42:24 Set A/D channel type result=40 12:42:24 Set A/D encoding result=40 12:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:24 Set channel filter=0.000000e+000 result=40 12:42:24 Config A/D Result=40 12:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:24 Get A/D filter: -9.255963e+061 result=40 12:42:24 Get A/D value=-858993460 result=40 12:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:24 Aux= 12:42:24 Message to Camera, serial 116822 queued 12:43:01 Received message from Master: op=PointingHead serial=116835 12:43:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:43:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:43:01 Point started: ret=0 12:43:01 point_skyscan result=0 12:43:02 Check angles 12:43:02 SkyScan query 12:43:03 SkyScan query done: ret=0 az=134.58<-8972 ze=36.48<-9568 Statuses=0009 0009 12:43:03 Msec=0 True Az=134.58 Ze=36.48 Az status=0009 Ze status=0009 12:43:03 Check angles 12:43:03 SkyScan query 12:43:03 SkyScan query done: ret=0 az=117.045<-7803 ze=15.525<-10965 Statuses=0009 0009 12:43:03 Msec=750 True Az=117.045 Ze=15.525 Az status=0009 Ze status=0009 12:43:04 Check angles 12:43:04 SkyScan query 12:43:04 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.49<-12366 Statuses=0009 0009 12:43:04 Msec=1500 True Az=99.78 Ze=-5.49 Az status=0009 Ze status=0009 12:43:04 Check angles 12:43:04 SkyScan query 12:43:05 SkyScan query done: ret=0 az=81.96<-5464 ze=-26.88<-13792 Statuses=0009 0009 12:43:05 Msec=2250 True Az=81.96 Ze=-26.88 Az status=0009 Ze status=0009 12:43:05 Check angles 12:43:05 SkyScan query 12:43:06 SkyScan query done: ret=0 az=64.11<-4274 ze=-38.58<-14572 Statuses=0009 0008 12:43:06 Msec=3000 True Az=64.11 Ze=-38.58 Az status=0009 Ze status=0008 12:43:06 Check angles 12:43:06 SkyScan query 12:43:06 SkyScan query done: ret=0 az=46.53<-3102 ze=-38.52<-14568 Statuses=0009 0008 12:43:06 Msec=3750 True Az=46.53 Ze=-38.52 Az status=0009 Ze status=0008 12:43:07 Check angles 12:43:07 SkyScan query 12:43:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:43:07 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:43:07 Message to Master queued w/err=0: serial=116835 error=0 12:43:12 Received message from Master: op=Filter serial=116836 12:43:12 Color wheel filter change from 0 to 0 12:43:12 FLIGetFilterPos err=0 currentPosition=0 12:43:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:12 Filter is already there-color wheel unchanged 12:43:12 Received message from Master: op=Shutter serial=116837 12:43:12 Shutter LASER close 12:43:12 Received message from Camera: op=State serial=116839 12:43:12 GetSingleValue result=40 Value=cccccccc 12:43:12 SkyScan query 12:43:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:43:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:13 Parameters OK 12:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:13 Set A/D data flow result=40 12:43:13 Set A/D channel type result=40 12:43:13 Set A/D encoding result=40 12:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:13 Set channel filter=0.000000e+000 result=40 12:43:13 Config A/D Result=40 12:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:13 Get A/D filter: -9.255963e+061 result=40 12:43:13 Get A/D value=-858993460 result=40 12:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:13 Parameters OK 12:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:13 Set A/D data flow result=40 12:43:13 Set A/D channel type result=40 12:43:13 Set A/D encoding result=40 12:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:13 Set channel filter=0.000000e+000 result=40 12:43:13 Config A/D Result=40 12:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:13 Get A/D filter: -9.255963e+061 result=40 12:43:13 Get A/D value=-858993460 result=40 12:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:13 Aux= 12:43:13 Message to Camera, serial 116839 queued 12:43:50 Received message from Master: op=PointingHead serial=116852 12:43:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:43:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:43:50 Point started: ret=0 12:43:50 point_skyscan result=0 12:43:51 Check angles 12:43:51 SkyScan query 12:43:52 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.235<-16549 Statuses=0009 0009 12:43:52 Msec=0 True Az=63.99 Ze=-68.235 Az status=0009 Ze status=0009 12:43:52 Check angles 12:43:52 SkyScan query 12:43:52 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.67<-17978 Statuses=0009 0009 12:43:52 Msec=750 True Az=81.825 Ze=-89.67 Az status=0009 Ze status=0009 12:43:52 Check angles 12:43:52 SkyScan query 12:43:53 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.61<-19374 Statuses=0009 0009 12:43:53 Msec=1500 True Az=99.39 Ze=-110.61 Az status=0009 Ze status=0009 12:43:53 Check angles 12:43:53 SkyScan query 12:43:54 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.52<-20768 Statuses=0009 0009 12:43:54 Msec=2250 True Az=116.805 Ze=-131.52 Az status=0009 Ze status=0009 12:43:54 Check angles 12:43:54 SkyScan query 12:43:55 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 12:43:55 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 12:43:55 Check angles 12:43:55 SkyScan query 12:43:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 12:43:55 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 12:43:55 Message to Master queued w/err=0: serial=116852 error=0 12:44:00 Received message from Master: op=Filter serial=116853 12:44:00 Color wheel filter change from 0 to 0 12:44:00 FLIGetFilterPos err=0 currentPosition=0 12:44:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:00 Filter is already there-color wheel unchanged 12:44:00 Received message from Master: op=Shutter serial=116854 12:44:00 Shutter LASER close 12:44:01 Received message from Camera: op=State serial=116856 12:44:01 GetSingleValue result=40 Value=cccccccc 12:44:01 SkyScan query 12:44:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:44:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:01 Parameters OK 12:44:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:01 Set A/D data flow result=40 12:44:01 Set A/D channel type result=40 12:44:01 Set A/D encoding result=40 12:44:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:01 Set channel filter=0.000000e+000 result=40 12:44:01 Config A/D Result=40 12:44:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:01 Get A/D filter: -9.255963e+061 result=40 12:44:01 Get A/D value=-858993460 result=40 12:44:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:01 Parameters OK 12:44:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:01 Set A/D data flow result=40 12:44:01 Set A/D channel type result=40 12:44:01 Set A/D encoding result=40 12:44:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:01 Set channel filter=0.000000e+000 result=40 12:44:01 Config A/D Result=40 12:44:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:01 Get A/D filter: -9.255963e+061 result=40 12:44:01 Get A/D value=-858993460 result=40 12:44:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:01 Aux= 12:44:01 Message to Camera, serial 116856 queued 12:44:37 Received message from Master: op=PointingHead serial=116868 12:44:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:44:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:44:37 Point started: ret=0 12:44:37 point_skyscan result=0 12:44:38 Check angles 12:44:38 SkyScan query 12:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0009 0009 12:44:39 Msec=0 True Az=112.995 Ze=-171.21 Az status=0009 Ze status=0009 12:44:39 Check angles 12:44:39 SkyScan query 12:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:44:39 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:44:39 Message to Master queued w/err=0: serial=116868 error=0 12:44:44 Received message from Master: op=Filter serial=116869 12:44:44 Color wheel filter change from 0 to 0 12:44:44 FLIGetFilterPos err=0 currentPosition=0 12:44:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:44 Filter is already there-color wheel unchanged 12:44:45 Received message from Master: op=Shutter serial=116870 12:44:45 Shutter LASER open 12:44:45 Received message from Camera: op=State serial=116872 12:44:45 GetSingleValue result=40 Value=cccccccc 12:44:45 SkyScan query 12:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:44:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:45 Parameters OK 12:44:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:45 Set A/D data flow result=40 12:44:45 Set A/D channel type result=40 12:44:45 Set A/D encoding result=40 12:44:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:45 Set channel filter=0.000000e+000 result=40 12:44:45 Config A/D Result=40 12:44:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:45 Get A/D filter: -9.255963e+061 result=40 12:44:45 Get A/D value=-858993460 result=40 12:44:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:45 Parameters OK 12:44:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:45 Set A/D data flow result=40 12:44:45 Set A/D channel type result=40 12:44:45 Set A/D encoding result=40 12:44:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:45 Set channel filter=0.000000e+000 result=40 12:44:45 Config A/D Result=40 12:44:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:45 Get A/D filter: -9.255963e+061 result=40 12:44:45 Get A/D value=-858993460 result=40 12:44:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:45 Aux= 12:44:45 Message to Camera, serial 116872 queued 12:44:54 Received message from Master: op=Shutter serial=116882 12:44:54 Shutter LASER close 12:44:54 Received message from Master: op=PointingHead serial=116886 12:44:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:44:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:44:55 Point started: ret=0 12:44:55 point_skyscan result=0 12:44:56 Check angles 12:44:56 SkyScan query 12:44:56 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.845<-21523 Statuses=0009 0009 12:44:56 Msec=0 True Az=136.38 Ze=-142.845 Az status=0009 Ze status=0009 12:44:56 Check angles 12:44:56 SkyScan query 12:44:57 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.905<-20127 Statuses=0009 0009 12:44:57 Msec=750 True Az=153.78 Ze=-121.905 Az status=0009 Ze status=0009 12:44:57 Check angles 12:44:57 SkyScan query 12:44:58 SkyScan query done: ret=0 az=171.81<-11454 ze=-100.065<-18671 Statuses=0009 0009 12:44:58 Msec=1500 True Az=171.81 Ze=-100.065 Az status=0009 Ze status=0009 12:44:58 Check angles 12:44:58 SkyScan query 12:44:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.56<-17304 Statuses=0008 0009 12:44:58 Msec=2250 True Az=176.01 Ze=-79.56 Az status=0008 Ze status=0009 12:44:59 Check angles 12:44:59 SkyScan query 12:44:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.59<-15906 Statuses=0008 0009 12:44:59 Msec=3000 True Az=176.01 Ze=-58.59 Az status=0008 Ze status=0009 12:44:59 Check angles 12:44:59 SkyScan query 12:45:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 12:45:00 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 12:45:00 Message to Master queued w/err=0: serial=116886 error=0 12:45:05 Received message from Master: op=Filter serial=116887 12:45:05 Color wheel filter change from 0 to 0 12:45:05 FLIGetFilterPos err=0 currentPosition=0 12:45:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:05 Filter is already there-color wheel unchanged 12:45:05 Received message from Master: op=Shutter serial=116888 12:45:05 Shutter LASER close 12:45:05 Received message from Camera: op=State serial=116890 12:45:05 GetSingleValue result=40 Value=cccccccc 12:45:05 SkyScan query 12:45:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:45:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:06 Parameters OK 12:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:06 Set A/D data flow result=40 12:45:06 Set A/D channel type result=40 12:45:06 Set A/D encoding result=40 12:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:06 Set channel filter=0.000000e+000 result=40 12:45:06 Config A/D Result=40 12:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:06 Get A/D filter: -9.255963e+061 result=40 12:45:06 Get A/D value=-858993460 result=40 12:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:06 Parameters OK 12:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:06 Set A/D data flow result=40 12:45:06 Set A/D channel type result=40 12:45:06 Set A/D encoding result=40 12:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:06 Set channel filter=0.000000e+000 result=40 12:45:06 Config A/D Result=40 12:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:06 Get A/D filter: -9.255963e+061 result=40 12:45:06 Get A/D value=-858993460 result=40 12:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:06 Aux= 12:45:06 Message to Camera, serial 116890 queued 12:45:27 Received message from Master: op=Identify serial=116891 12:45:43 Received message from Master: op=PointingHead serial=116906 12:45:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:45:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:45:43 Point started: ret=0 12:45:43 point_skyscan result=0 12:45:44 Check angles 12:45:44 SkyScan query 12:45:44 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.615<-13441 Statuses=0009 0009 12:45:44 Msec=0 True Az=152.79 Ze=-21.615 Az status=0009 Ze status=0009 12:45:44 Check angles 12:45:44 SkyScan query 12:45:45 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.6<-12040 Statuses=0009 0009 12:45:45 Msec=750 True Az=135.375 Ze=-0.6 Az status=0009 Ze status=0009 12:45:45 Check angles [UTC 2018-12-13 12:45:45] 12:45:45 SkyScan query 12:45:46 SkyScan query done: ret=0 az=116.475<-7765 ze=22.05<-10530 Statuses=0009 0009 12:45:46 Msec=1500 True Az=116.475 Ze=22.05 Az status=0009 Ze status=0009 12:45:46 Check angles 12:45:46 SkyScan query 12:45:47 SkyScan query done: ret=0 az=100.44<-6696 ze=41.325<-9245 Statuses=0009 0009 12:45:47 Msec=2250 True Az=100.44 Ze=41.325 Az status=0009 Ze status=0009 12:45:47 Check angles 12:45:47 SkyScan query 12:45:47 SkyScan query done: ret=0 az=86.025<-5735 ze=51.57<-8562 Statuses=0009 0008 12:45:47 Msec=3000 True Az=86.025 Ze=51.57 Az status=0009 Ze status=0008 12:45:47 Check angles 12:45:47 SkyScan query 12:45:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:45:48 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:45:48 Message to Master queued w/err=0: serial=116906 error=0 12:45:53 Received message from Master: op=Filter serial=116907 12:45:53 Color wheel filter change from 0 to 0 12:45:53 FLIGetFilterPos err=0 currentPosition=0 12:45:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:53 Filter is already there-color wheel unchanged 12:45:53 Received message from Master: op=Shutter serial=116908 12:45:53 Shutter LASER close 12:45:53 Received message from Camera: op=State serial=116910 12:45:53 GetSingleValue result=40 Value=cccccccc 12:45:53 SkyScan query 12:45:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:45:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:54 Parameters OK 12:45:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:54 Set A/D data flow result=40 12:45:54 Set A/D channel type result=40 12:45:54 Set A/D encoding result=40 12:45:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:54 Set channel filter=0.000000e+000 result=40 12:45:54 Config A/D Result=40 12:45:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:54 Get A/D filter: -9.255963e+061 result=40 12:45:54 Get A/D value=-858993460 result=40 12:45:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:54 Parameters OK 12:45:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:54 Set A/D data flow result=40 12:45:54 Set A/D channel type result=40 12:45:54 Set A/D encoding result=40 12:45:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:54 Set channel filter=0.000000e+000 result=40 12:45:54 Config A/D Result=40 12:45:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:54 Get A/D filter: -9.255963e+061 result=40 12:45:54 Get A/D value=-858993460 result=40 12:45:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:54 Aux= 12:45:54 Message to Camera, serial 116910 queued 12:46:31 Received message from Master: op=PointingHead serial=116923 12:46:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:46:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:46:31 Point started: ret=0 12:46:31 point_skyscan result=0 12:46:32 Check angles 12:46:32 SkyScan query 12:46:32 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 12:46:32 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 12:46:33 Check angles 12:46:33 SkyScan query 12:46:33 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 12:46:33 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 12:46:33 Check angles 12:46:33 SkyScan query 12:46:34 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 12:46:34 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 12:46:34 Check angles 12:46:34 SkyScan query 12:46:35 SkyScan query done: ret=0 az=162.135<-10809 ze=38.505<-9433 Statuses=0009 0008 12:46:35 Msec=2250 True Az=162.135 Ze=38.505 Az status=0009 Ze status=0008 12:46:35 Check angles 12:46:35 SkyScan query 12:46:35 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:46:35 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:46:36 Check angles 12:46:36 SkyScan query 12:46:36 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:46:36 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:46:36 Message to Master queued w/err=0: serial=116923 error=0 12:46:41 Received message from Master: op=Filter serial=116924 12:46:41 Color wheel filter change from 0 to 0 12:46:41 FLIGetFilterPos err=0 currentPosition=0 12:46:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:41 Filter is already there-color wheel unchanged 12:46:41 Received message from Master: op=Shutter serial=116925 12:46:41 Shutter LASER close 12:46:41 Received message from Camera: op=State serial=116927 12:46:41 GetSingleValue result=40 Value=cccccccc 12:46:41 SkyScan query 12:46:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:46:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:42 Parameters OK 12:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:42 Set A/D data flow result=40 12:46:42 Set A/D channel type result=40 12:46:42 Set A/D encoding result=40 12:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:42 Set channel filter=0.000000e+000 result=40 12:46:42 Config A/D Result=40 12:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:42 Get A/D filter: -9.255963e+061 result=40 12:46:42 Get A/D value=-858993460 result=40 12:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:42 Parameters OK 12:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:42 Set A/D data flow result=40 12:46:42 Set A/D channel type result=40 12:46:42 Set A/D encoding result=40 12:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:42 Set channel filter=0.000000e+000 result=40 12:46:42 Config A/D Result=40 12:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:42 Get A/D filter: -9.255963e+061 result=40 12:46:42 Get A/D value=-858993460 result=40 12:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:42 Aux= 12:46:42 Message to Camera, serial 116927 queued 12:47:19 Received message from Master: op=PointingHead serial=116940 12:47:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:47:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:47:19 Point started: ret=0 12:47:19 point_skyscan result=0 12:47:20 Check angles 12:47:20 SkyScan query 12:47:20 SkyScan query done: ret=0 az=153.105<-10207 ze=8.895<-11407 Statuses=0009 0009 12:47:20 Msec=0 True Az=153.105 Ze=8.895 Az status=0009 Ze status=0009 12:47:21 Check angles 12:47:21 SkyScan query 12:47:21 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.09<-12806 Statuses=0009 0009 12:47:21 Msec=750 True Az=135.675 Ze=-12.09 Az status=0009 Ze status=0009 12:47:21 Check angles 12:47:21 SkyScan query 12:47:22 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.48<-14232 Statuses=0009 0009 12:47:22 Msec=1500 True Az=117.75 Ze=-33.48 Az status=0009 Ze status=0009 12:47:22 Check angles 12:47:22 SkyScan query 12:47:23 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 12:47:23 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 12:47:23 Check angles 12:47:23 SkyScan query 12:47:23 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:47:23 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:47:24 Check angles 12:47:24 SkyScan query 12:47:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:47:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:47:24 Message to Master queued w/err=0: serial=116940 error=0 12:47:29 Received message from Master: op=Filter serial=116941 12:47:29 Color wheel filter change from 0 to 0 12:47:29 FLIGetFilterPos err=0 currentPosition=0 12:47:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:29 Filter is already there-color wheel unchanged 12:47:29 Received message from Master: op=Shutter serial=116942 12:47:29 Shutter LASER close 12:47:29 Received message from Camera: op=State serial=116944 12:47:29 GetSingleValue result=40 Value=cccccccc 12:47:29 SkyScan query 12:47:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:47:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:30 Parameters OK 12:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:30 Set A/D data flow result=40 12:47:30 Set A/D channel type result=40 12:47:30 Set A/D encoding result=40 12:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:30 Set channel filter=0.000000e+000 result=40 12:47:30 Config A/D Result=40 12:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:30 Get A/D filter: -9.255963e+061 result=40 12:47:30 Get A/D value=-858993460 result=40 12:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:30 Parameters OK 12:47:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:30 Set A/D data flow result=40 12:47:30 Set A/D channel type result=40 12:47:30 Set A/D encoding result=40 12:47:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:30 Set channel filter=0.000000e+000 result=40 12:47:30 Config A/D Result=40 12:47:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:30 Get A/D filter: -9.255963e+061 result=40 12:47:30 Get A/D value=-858993460 result=40 12:47:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:30 Aux= 12:47:30 Message to Camera, serial 116944 queued 12:48:07 Received message from Master: op=PointingHead serial=116957 12:48:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:48:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:48:07 Point started: ret=0 12:48:07 point_skyscan result=0 12:48:08 Check angles 12:48:08 SkyScan query 12:48:09 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.45<-17430 Statuses=0009 0009 12:48:09 Msec=0 True Az=109.185 Ze=-81.45 Az status=0009 Ze status=0009 12:48:09 Check angles 12:48:09 SkyScan query 12:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.39<-18826 Statuses=0008 0009 12:48:09 Msec=750 True Az=112.995 Ze=-102.39 Az status=0008 Ze status=0009 12:48:09 Check angles 12:48:09 SkyScan query 12:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 12:48:10 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 12:48:10 Check angles 12:48:10 SkyScan query 12:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 12:48:11 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 12:48:11 Check angles 12:48:11 SkyScan query 12:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.24<-23016 Statuses=0008 0009 12:48:12 Msec=3000 True Az=112.995 Ze=-165.24 Az status=0008 Ze status=0009 12:48:12 Check angles 12:48:12 SkyScan query 12:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:48:12 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:48:12 Message to Master queued w/err=0: serial=116957 error=0 12:48:17 Received message from Master: op=Filter serial=116958 12:48:17 Color wheel filter change from 0 to 0 12:48:17 FLIGetFilterPos err=0 currentPosition=0 12:48:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:17 Filter is already there-color wheel unchanged 12:48:17 Received message from Master: op=Shutter serial=116959 12:48:17 Shutter LASER open 12:48:18 Received message from Camera: op=State serial=116961 12:48:18 GetSingleValue result=40 Value=cccccccc 12:48:18 SkyScan query 12:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:18 Parameters OK 12:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:18 Set A/D data flow result=40 12:48:18 Set A/D channel type result=40 12:48:18 Set A/D encoding result=40 12:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:18 Set channel filter=0.000000e+000 result=40 12:48:18 Config A/D Result=40 12:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:18 Get A/D filter: -9.255963e+061 result=40 12:48:18 Get A/D value=-858993460 result=40 12:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:18 Parameters OK 12:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:18 Set A/D data flow result=40 12:48:18 Set A/D channel type result=40 12:48:18 Set A/D encoding result=40 12:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:18 Set channel filter=0.000000e+000 result=40 12:48:18 Config A/D Result=40 12:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:18 Get A/D filter: -9.255963e+061 result=40 12:48:18 Get A/D value=-858993460 result=40 12:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:18 Aux= 12:48:18 Message to Camera, serial 116961 queued 12:48:27 Received message from Master: op=Shutter serial=116971 12:48:27 Shutter LASER close 12:48:27 Received message from Master: op=PointingHead serial=116975 12:48:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:48:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:48:27 Point started: ret=0 12:48:27 point_skyscan result=0 12:48:28 Check angles 12:48:28 SkyScan query 12:48:29 SkyScan query done: ret=0 az=89.865<-5991 ze=157.155<-1523 Statuses=0009 0009 12:48:29 Msec=0 True Az=89.865 Ze=157.155 Az status=0009 Ze status=0009 12:48:29 Check angles 12:48:29 SkyScan query 12:48:30 SkyScan query done: ret=0 az=72<-4800 ze=135.75<-2950 Statuses=0009 0009 12:48:30 Msec=750 True Az=72 Ze=135.75 Az status=0009 Ze status=0009 12:48:30 Check angles 12:48:30 SkyScan query 12:48:30 SkyScan query done: ret=0 az=54.69<-3646 ze=114.795<-4347 Statuses=0009 0009 12:48:30 Msec=1500 True Az=54.69 Ze=114.795 Az status=0009 Ze status=0009 12:48:30 Check angles 12:48:30 SkyScan query 12:48:31 SkyScan query done: ret=0 az=40.95<-2730 ze=93.855<-5743 Statuses=0009 0009 12:48:31 Msec=2250 True Az=40.95 Ze=93.855 Az status=0009 Ze status=0009 12:48:31 Check angles 12:48:31 SkyScan query 12:48:32 SkyScan query done: ret=0 az=40.995<-2733 ze=72.435<-7171 Statuses=0008 0009 12:48:32 Msec=3000 True Az=40.995 Ze=72.435 Az status=0008 Ze status=0009 12:48:32 Check angles 12:48:32 SkyScan query 12:48:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 12:48:33 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 12:48:33 Check angles 12:48:33 SkyScan query 12:48:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:48:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:48:33 Message to Master queued w/err=0: serial=116975 error=0 12:48:38 Received message from Master: op=Filter serial=116976 12:48:38 Color wheel filter change from 0 to 0 12:48:38 FLIGetFilterPos err=0 currentPosition=0 12:48:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:38 Filter is already there-color wheel unchanged 12:48:38 Received message from Master: op=Shutter serial=116977 12:48:38 Shutter LASER close 12:48:39 Received message from Camera: op=State serial=116979 12:48:39 GetSingleValue result=40 Value=cccccccc 12:48:39 SkyScan query 12:48:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:48:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:39 Parameters OK 12:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:39 Set A/D data flow result=40 12:48:39 Set A/D channel type result=40 12:48:39 Set A/D encoding result=40 12:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:39 Set channel filter=0.000000e+000 result=40 12:48:39 Config A/D Result=40 12:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:39 Get A/D filter: -9.255963e+061 result=40 12:48:39 Get A/D value=-858993460 result=40 12:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:39 Parameters OK 12:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:39 Set A/D data flow result=40 12:48:39 Set A/D channel type result=40 12:48:39 Set A/D encoding result=40 12:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:39 Set channel filter=0.000000e+000 result=40 12:48:39 Config A/D Result=40 12:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:39 Get A/D filter: -9.255963e+061 result=40 12:48:39 Get A/D value=-858993460 result=40 12:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:39 Aux= 12:48:39 Message to Camera, serial 116979 queued 12:49:16 Received message from Master: op=PointingHead serial=116992 12:49:16 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:49:16 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:49:16 Point started: ret=0 12:49:16 point_skyscan result=0 12:49:17 Check angles 12:49:17 SkyScan query 12:49:18 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 12:49:18 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 12:49:18 Check angles 12:49:18 SkyScan query 12:49:18 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 12:49:18 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 12:49:19 Check angles 12:49:19 SkyScan query 12:49:19 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 12:49:19 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 12:49:19 Check angles 12:49:19 SkyScan query 12:49:20 SkyScan query done: ret=0 az=116.295<-7753 ze=66.495<-7567 Statuses=0009 0008 12:49:20 Msec=2250 True Az=116.295 Ze=66.495 Az status=0009 Ze status=0008 12:49:20 Check angles 12:49:20 SkyScan query 12:49:21 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 12:49:21 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 12:49:21 Check angles 12:49:21 SkyScan query 12:49:21 SkyScan query done: ret=0 az=151.23<-10082 ze=66.495<-7567 Statuses=0009 0008 12:49:21 Msec=3750 True Az=151.23 Ze=66.495 Az status=0009 Ze status=0008 12:49:22 Check angles 12:49:22 SkyScan query 12:49:22 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:49:22 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:49:22 Message to Master queued w/err=0: serial=116992 error=0 12:49:27 Received message from Master: op=Filter serial=116993 12:49:27 Color wheel filter change from 0 to 0 12:49:27 FLIGetFilterPos err=0 currentPosition=0 12:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:27 Filter is already there-color wheel unchanged 12:49:27 Received message from Master: op=Shutter serial=116994 12:49:27 Shutter LASER close 12:49:27 Received message from Camera: op=State serial=116996 12:49:27 GetSingleValue result=40 Value=cccccccc 12:49:27 SkyScan query 12:49:28 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:28 Parameters OK 12:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:28 Set A/D data flow result=40 12:49:28 Set A/D channel type result=40 12:49:28 Set A/D encoding result=40 12:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:28 Set channel filter=0.000000e+000 result=40 12:49:28 Config A/D Result=40 12:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:28 Get A/D filter: -9.255963e+061 result=40 12:49:28 Get A/D value=-858993460 result=40 12:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:28 Parameters OK 12:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:28 Set A/D data flow result=40 12:49:28 Set A/D channel type result=40 12:49:28 Set A/D encoding result=40 12:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:28 Set channel filter=0.000000e+000 result=40 12:49:28 Config A/D Result=40 12:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:28 Get A/D filter: -9.255963e+061 result=40 12:49:28 Get A/D value=-858993460 result=40 12:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:28 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:28 Aux= 12:49:28 Message to Camera, serial 116996 queued 12:50:05 Received message from Master: op=PointingHead serial=117009 12:50:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:50:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:50:05 Point started: ret=0 12:50:05 point_skyscan result=0 12:50:06 Check angles 12:50:06 SkyScan query 12:50:07 SkyScan query done: ret=0 az=135.195<-9013 ze=36.915<-9539 Statuses=0009 0009 12:50:07 Msec=0 True Az=135.195 Ze=36.915 Az status=0009 Ze status=0009 12:50:07 Check angles 12:50:07 SkyScan query 12:50:07 SkyScan query done: ret=0 az=117.75<-7850 ze=15.96<-10936 Statuses=0009 0009 12:50:07 Msec=750 True Az=117.75 Ze=15.96 Az status=0009 Ze status=0009 12:50:07 Check angles 12:50:07 SkyScan query 12:50:08 SkyScan query done: ret=0 az=100.32<-6688 ze=-4.98<-12332 Statuses=0009 0009 12:50:08 Msec=1500 True Az=100.32 Ze=-4.98 Az status=0009 Ze status=0009 12:50:08 Check angles 12:50:08 SkyScan query 12:50:09 SkyScan query done: ret=0 az=82.77<-5518 ze=-25.935<-13729 Statuses=0009 0009 12:50:09 Msec=2250 True Az=82.77 Ze=-25.935 Az status=0009 Ze status=0009 12:50:09 Check angles 12:50:09 SkyScan query 12:50:10 SkyScan query done: ret=0 az=65.355<-4357 ze=-38.565<-14571 Statuses=0009 0008 12:50:10 Msec=3000 True Az=65.355 Ze=-38.565 Az status=0009 Ze status=0008 12:50:10 Check angles 12:50:10 SkyScan query 12:50:10 SkyScan query done: ret=0 az=47.91<-3194 ze=-38.535<-14569 Statuses=0009 0008 12:50:10 Msec=3750 True Az=47.91 Ze=-38.535 Az status=0009 Ze status=0008 12:50:10 Check angles 12:50:10 SkyScan query 12:50:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:50:11 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:50:11 Message to Master queued w/err=0: serial=117009 error=0 12:50:16 Received message from Master: op=Filter serial=117010 12:50:16 Color wheel filter change from 0 to 0 12:50:16 FLIGetFilterPos err=0 currentPosition=0 12:50:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:16 Filter is already there-color wheel unchanged 12:50:16 Received message from Master: op=Shutter serial=117011 12:50:16 Shutter LASER close 12:50:16 Received message from Camera: op=State serial=117013 12:50:16 GetSingleValue result=40 Value=cccccccc 12:50:16 SkyScan query 12:50:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:50:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:17 Parameters OK 12:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:17 Set A/D data flow result=40 12:50:17 Set A/D channel type result=40 12:50:17 Set A/D encoding result=40 12:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:17 Set channel filter=0.000000e+000 result=40 12:50:17 Config A/D Result=40 12:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:17 Get A/D filter: -9.255963e+061 result=40 12:50:17 Get A/D value=-858993460 result=40 12:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:17 Parameters OK 12:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:17 Set A/D data flow result=40 12:50:17 Set A/D channel type result=40 12:50:17 Set A/D encoding result=40 12:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:17 Set channel filter=0.000000e+000 result=40 12:50:17 Config A/D Result=40 12:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:17 Get A/D filter: -9.255963e+061 result=40 12:50:17 Get A/D value=-858993460 result=40 12:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:17 Aux= 12:50:17 Message to Camera, serial 117013 queued 12:50:54 Received message from Master: op=PointingHead serial=117026 12:50:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:50:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:50:54 Point started: ret=0 12:50:54 point_skyscan result=0 12:50:55 Check angles 12:50:55 SkyScan query 12:50:55 SkyScan query done: ret=0 az=63.765<-4251 ze=-67.995<-16533 Statuses=0009 0009 12:50:55 Msec=0 True Az=63.765 Ze=-67.995 Az status=0009 Ze status=0009 12:50:55 Check angles 12:50:55 SkyScan query 12:50:56 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.43<-17962 Statuses=0009 0009 12:50:56 Msec=750 True Az=81.6 Ze=-89.43 Az status=0009 Ze status=0009 12:50:56 Check angles 12:50:56 SkyScan query 12:50:57 SkyScan query done: ret=0 az=99<-6600 ze=-110.37<-19358 Statuses=0009 0009 12:50:57 Msec=1500 True Az=99 Ze=-110.37 Az status=0009 Ze status=0009 12:50:57 Check angles 12:50:57 SkyScan query 12:50:58 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.325<-20755 Statuses=0009 0009 12:50:58 Msec=2250 True Az=116.61 Ze=-131.325 Az status=0009 Ze status=0009 12:50:58 Check angles 12:50:58 SkyScan query 12:50:58 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 12:50:58 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 12:50:58 Check angles 12:50:58 SkyScan query 12:50:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:50:59 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:50:59 Message to Master queued w/err=0: serial=117026 error=0 12:51:04 Received message from Master: op=Filter serial=117027 12:51:04 Color wheel filter change from 0 to 0 12:51:04 FLIGetFilterPos err=0 currentPosition=0 12:51:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:04 Filter is already there-color wheel unchanged 12:51:04 Received message from Master: op=Shutter serial=117028 12:51:04 Shutter LASER close 12:51:04 Received message from Camera: op=State serial=117030 12:51:04 GetSingleValue result=40 Value=cccccccc 12:51:04 SkyScan query 12:51:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:51:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:05 Parameters OK 12:51:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:05 Set A/D data flow result=40 12:51:05 Set A/D channel type result=40 12:51:05 Set A/D encoding result=40 12:51:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:05 Set channel filter=0.000000e+000 result=40 12:51:05 Config A/D Result=40 12:51:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:05 Get A/D filter: -9.255963e+061 result=40 12:51:05 Get A/D value=-858993460 result=40 12:51:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:05 Parameters OK 12:51:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:05 Set A/D data flow result=40 12:51:05 Set A/D channel type result=40 12:51:05 Set A/D encoding result=40 12:51:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:05 Set channel filter=0.000000e+000 result=40 12:51:05 Config A/D Result=40 12:51:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:05 Get A/D filter: -9.255963e+061 result=40 12:51:05 Get A/D value=-858993460 result=40 12:51:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:05 Aux= 12:51:05 Message to Camera, serial 117030 queued 12:51:42 Received message from Master: op=PointingHead serial=117043 12:51:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:51:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:51:42 Point started: ret=0 12:51:42 point_skyscan result=0 12:51:43 Check angles 12:51:43 SkyScan query 12:51:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 12:51:43 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 12:51:44 Check angles 12:51:44 SkyScan query 12:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:51:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:51:44 Message to Master queued w/err=0: serial=117043 error=0 12:51:49 Received message from Master: op=Filter serial=117044 12:51:49 Color wheel filter change from 0 to 0 12:51:49 FLIGetFilterPos err=0 currentPosition=0 12:51:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:49 Filter is already there-color wheel unchanged 12:51:49 Received message from Master: op=Shutter serial=117045 12:51:49 Shutter LASER open 12:51:49 Received message from Camera: op=State serial=117047 12:51:49 GetSingleValue result=40 Value=cccccccc 12:51:49 SkyScan query 12:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:51:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:50 Parameters OK 12:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:50 Set A/D data flow result=40 12:51:50 Set A/D channel type result=40 12:51:50 Set A/D encoding result=40 12:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:50 Set channel filter=0.000000e+000 result=40 12:51:50 Config A/D Result=40 12:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:50 Get A/D filter: -9.255963e+061 result=40 12:51:50 Get A/D value=-858993460 result=40 12:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:50 Parameters OK 12:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:50 Set A/D data flow result=40 12:51:50 Set A/D channel type result=40 12:51:50 Set A/D encoding result=40 12:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:50 Set channel filter=0.000000e+000 result=40 12:51:50 Config A/D Result=40 12:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:50 Get A/D filter: -9.255963e+061 result=40 12:51:50 Get A/D value=-858993460 result=40 12:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:50 Aux= 12:51:50 Message to Camera, serial 117047 queued 12:51:58 Received message from Master: op=Shutter serial=117056 12:51:58 Shutter LASER close 12:51:58 Received message from Master: op=PointingHead serial=117060 12:51:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:51:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:51:58 Point started: ret=0 12:51:58 point_skyscan result=0 12:51:59 Check angles 12:51:59 SkyScan query 12:52:00 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.19<-21546 Statuses=0009 0009 12:52:00 Msec=0 True Az=136.005 Ze=-143.19 Az status=0009 Ze status=0009 12:52:00 Check angles 12:52:00 SkyScan query 12:52:01 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.22<-20148 Statuses=0009 0009 12:52:01 Msec=750 True Az=153.585 Ze=-122.22 Az status=0009 Ze status=0009 12:52:01 Check angles 12:52:01 SkyScan query 12:52:01 SkyScan query done: ret=0 az=171.03<-11402 ze=-101.325<-18755 Statuses=0009 0009 12:52:01 Msec=1500 True Az=171.03 Ze=-101.325 Az status=0009 Ze status=0009 12:52:01 Check angles 12:52:01 SkyScan query 12:52:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.34<-17356 Statuses=0008 0009 12:52:02 Msec=2250 True Az=176.01 Ze=-80.34 Az status=0008 Ze status=0009 12:52:02 Check angles 12:52:02 SkyScan query 12:52:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.385<-15959 Statuses=0008 0009 12:52:03 Msec=3000 True Az=176.01 Ze=-59.385 Az status=0008 Ze status=0009 12:52:03 Check angles 12:52:03 SkyScan query 12:52:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:52:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:52:04 Message to Master queued w/err=0: serial=117060 error=0 12:52:09 Received message from Master: op=Filter serial=117061 12:52:09 Color wheel filter change from 0 to 0 12:52:09 FLIGetFilterPos err=0 currentPosition=0 12:52:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:09 Filter is already there-color wheel unchanged 12:52:09 Received message from Master: op=Shutter serial=117062 12:52:09 Shutter LASER close 12:52:09 Received message from Camera: op=State serial=117064 12:52:09 GetSingleValue result=40 Value=cccccccc 12:52:09 SkyScan query 12:52:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:52:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:09 Parameters OK 12:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:09 Set A/D data flow result=40 12:52:09 Set A/D channel type result=40 12:52:09 Set A/D encoding result=40 12:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:09 Set channel filter=0.000000e+000 result=40 12:52:09 Config A/D Result=40 12:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:09 Get A/D filter: -9.255963e+061 result=40 12:52:09 Get A/D value=-858993460 result=40 12:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:09 Parameters OK 12:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:09 Set A/D data flow result=40 12:52:09 Set A/D channel type result=40 12:52:09 Set A/D encoding result=40 12:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:09 Set channel filter=0.000000e+000 result=40 12:52:09 Config A/D Result=40 12:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:09 Get A/D filter: -9.255963e+061 result=40 12:52:09 Get A/D value=-858993460 result=40 12:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:09 Aux= 12:52:09 Message to Camera, serial 117064 queued 12:52:46 Received message from Master: op=PointingHead serial=117077 12:52:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:52:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:52:47 Point started: ret=0 12:52:47 point_skyscan result=0 12:52:47 Check angles 12:52:47 SkyScan query 12:52:48 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.795<-13453 Statuses=0009 0009 12:52:48 Msec=0 True Az=152.97 Ze=-21.795 Az status=0009 Ze status=0009 12:52:48 Check angles 12:52:48 SkyScan query 12:52:49 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.795<-12053 Statuses=0009 0009 12:52:49 Msec=750 True Az=135.585 Ze=-0.795 Az status=0009 Ze status=0009 12:52:49 Check angles 12:52:49 SkyScan query 12:52:50 SkyScan query done: ret=0 az=118.005<-7867 ze=20.13<-10658 Statuses=0009 0009 12:52:50 Msec=1500 True Az=118.005 Ze=20.13 Az status=0009 Ze status=0009 12:52:50 Check angles 12:52:50 SkyScan query 12:52:50 SkyScan query done: ret=0 az=100.62<-6708 ze=41.13<-9258 Statuses=0009 0009 12:52:50 Msec=2250 True Az=100.62 Ze=41.13 Az status=0009 Ze status=0009 12:52:50 Check angles 12:52:50 SkyScan query 12:52:51 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 12:52:51 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 12:52:51 Check angles 12:52:51 SkyScan query 12:52:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:52:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:52:52 Message to Master queued w/err=0: serial=117077 error=0 12:52:57 Received message from Master: op=Filter serial=117078 12:52:57 Color wheel filter change from 0 to 0 12:52:57 FLIGetFilterPos err=0 currentPosition=0 12:52:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:57 Filter is already there-color wheel unchanged 12:52:57 Received message from Master: op=Shutter serial=117079 12:52:57 Shutter LASER close 12:52:57 Received message from Camera: op=State serial=117081 12:52:57 GetSingleValue result=40 Value=cccccccc 12:52:57 SkyScan query 12:52:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:52:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:58 Parameters OK 12:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:58 Set A/D data flow result=40 12:52:58 Set A/D channel type result=40 12:52:58 Set A/D encoding result=40 12:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:58 Set channel filter=0.000000e+000 result=40 12:52:58 Config A/D Result=40 12:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:58 Get A/D filter: -9.255963e+061 result=40 12:52:58 Get A/D value=-858993460 result=40 12:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:58 Parameters OK 12:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:58 Set A/D data flow result=40 12:52:58 Set A/D channel type result=40 12:52:58 Set A/D encoding result=40 12:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:58 Set channel filter=0.000000e+000 result=40 12:52:58 Config A/D Result=40 12:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:58 Get A/D filter: -9.255963e+061 result=40 12:52:58 Get A/D value=-858993460 result=40 12:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:58 Aux= 12:52:58 Message to Camera, serial 117081 queued 12:53:34 Received message from Master: op=PointingHead serial=117094 12:53:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:53:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:53:35 Point started: ret=0 12:53:35 point_skyscan result=0 12:53:35 Check angles 12:53:35 SkyScan query 12:53:36 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 12:53:36 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 12:53:36 Check angles 12:53:36 SkyScan query 12:53:37 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 12:53:37 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 12:53:37 Check angles 12:53:37 SkyScan query 12:53:38 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 12:53:38 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 12:53:38 Check angles 12:53:38 SkyScan query 12:53:38 SkyScan query done: ret=0 az=161.1<-10740 ze=38.505<-9433 Statuses=0009 0008 12:53:38 Msec=2250 True Az=161.1 Ze=38.505 Az status=0009 Ze status=0008 12:53:38 Check angles 12:53:38 SkyScan query 12:53:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:53:39 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:53:39 Check angles 12:53:39 SkyScan query 12:53:40 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:53:40 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:53:40 Message to Master queued w/err=0: serial=117094 error=0 12:53:45 Received message from Master: op=Filter serial=117095 12:53:45 Color wheel filter change from 0 to 0 12:53:45 FLIGetFilterPos err=0 currentPosition=0 12:53:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:45 Filter is already there-color wheel unchanged 12:53:45 Received message from Master: op=Shutter serial=117096 12:53:45 Shutter LASER close 12:53:45 Received message from Camera: op=State serial=117098 12:53:45 GetSingleValue result=40 Value=cccccccc 12:53:45 SkyScan query 12:53:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:53:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:46 Parameters OK 12:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:46 Set A/D data flow result=40 12:53:46 Set A/D channel type result=40 12:53:46 Set A/D encoding result=40 12:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:46 Set channel filter=0.000000e+000 result=40 12:53:46 Config A/D Result=40 12:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:46 Get A/D filter: -9.255963e+061 result=40 12:53:46 Get A/D value=-858993460 result=40 12:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:46 Parameters OK 12:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:46 Set A/D data flow result=40 12:53:46 Set A/D channel type result=40 12:53:46 Set A/D encoding result=40 12:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:46 Set channel filter=0.000000e+000 result=40 12:53:46 Config A/D Result=40 12:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:46 Get A/D filter: -9.255963e+061 result=40 12:53:46 Get A/D value=-858993460 result=40 12:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:46 Aux= 12:53:46 Message to Camera, serial 117098 queued 12:54:22 Received message from Master: op=PointingHead serial=117111 12:54:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:54:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:54:23 Point started: ret=0 12:54:23 point_skyscan result=0 12:54:24 Check angles 12:54:24 SkyScan query 12:54:24 SkyScan query done: ret=0 az=152.97<-10198 ze=8.73<-11418 Statuses=0009 0009 12:54:24 Msec=0 True Az=152.97 Ze=8.73 Az status=0009 Ze status=0009 12:54:24 Check angles 12:54:24 SkyScan query 12:54:25 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.225<-12815 Statuses=0009 0009 12:54:25 Msec=750 True Az=135.6 Ze=-12.225 Az status=0009 Ze status=0009 12:54:25 Check angles 12:54:25 SkyScan query 12:54:26 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.555<-14237 Statuses=0009 0009 12:54:26 Msec=1500 True Az=117.585 Ze=-33.555 Az status=0009 Ze status=0009 12:54:26 Check angles 12:54:26 SkyScan query 12:54:26 SkyScan query done: ret=0 az=100.35<-6690 ze=-51.555<-15437 Statuses=0009 0009 12:54:26 Msec=2250 True Az=100.35 Ze=-51.555 Az status=0009 Ze status=0009 12:54:27 Check angles 12:54:27 SkyScan query 12:54:27 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:54:27 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:54:27 Check angles 12:54:27 SkyScan query 12:54:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:54:28 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:54:28 Message to Master queued w/err=0: serial=117111 error=0 12:54:33 Received message from Master: op=Filter serial=117112 12:54:33 Color wheel filter change from 0 to 0 12:54:33 FLIGetFilterPos err=0 currentPosition=0 12:54:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:33 Filter is already there-color wheel unchanged 12:54:33 Received message from Master: op=Shutter serial=117113 12:54:33 Shutter LASER close 12:54:33 Received message from Camera: op=State serial=117115 12:54:33 GetSingleValue result=40 Value=cccccccc 12:54:33 SkyScan query 12:54:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:54:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:34 Parameters OK 12:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:34 Set A/D data flow result=40 12:54:34 Set A/D channel type result=40 12:54:34 Set A/D encoding result=40 12:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:34 Set channel filter=0.000000e+000 result=40 12:54:34 Config A/D Result=40 12:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:34 Get A/D filter: -9.255963e+061 result=40 12:54:34 Get A/D value=-858993460 result=40 12:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:34 Parameters OK 12:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:34 Set A/D data flow result=40 12:54:34 Set A/D channel type result=40 12:54:34 Set A/D encoding result=40 12:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:34 Set channel filter=0.000000e+000 result=40 12:54:34 Config A/D Result=40 12:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:34 Get A/D filter: -9.255963e+061 result=40 12:54:34 Get A/D value=-858993460 result=40 12:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:34 Aux= 12:54:34 Message to Camera, serial 117115 queued 12:55:11 Received message from Master: op=PointingHead serial=117128 12:55:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:55:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:55:11 Point started: ret=0 12:55:11 point_skyscan result=0 12:55:12 Check angles 12:55:12 SkyScan query 12:55:12 SkyScan query done: ret=0 az=108.735<-7249 ze=-80.985<-17399 Statuses=0009 0009 12:55:12 Msec=0 True Az=108.735 Ze=-80.985 Az status=0009 Ze status=0009 12:55:12 Check angles 12:55:12 SkyScan query 12:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 12:55:13 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 12:55:13 Check angles 12:55:13 SkyScan query 12:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.78<-20252 Statuses=0008 0009 12:55:14 Msec=1500 True Az=112.995 Ze=-123.78 Az status=0008 Ze status=0009 12:55:14 Check angles 12:55:14 SkyScan query 12:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.17<-21678 Statuses=0008 0009 12:55:14 Msec=2250 True Az=112.995 Ze=-145.17 Az status=0008 Ze status=0009 12:55:15 Check angles 12:55:15 SkyScan query 12:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.11<-23074 Statuses=0008 0009 12:55:15 Msec=3000 True Az=112.995 Ze=-166.11 Az status=0008 Ze status=0009 12:55:15 Check angles 12:55:15 SkyScan query 12:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:55:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:55:16 Message to Master queued w/err=0: serial=117128 error=0 12:55:21 Received message from Master: op=Filter serial=117129 12:55:21 Color wheel filter change from 0 to 0 12:55:21 FLIGetFilterPos err=0 currentPosition=0 12:55:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:21 Filter is already there-color wheel unchanged 12:55:21 Received message from Master: op=Shutter serial=117130 12:55:21 Shutter LASER open 12:55:21 Received message from Camera: op=State serial=117132 12:55:21 GetSingleValue result=40 Value=cccccccc 12:55:21 SkyScan query 12:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:55:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:22 Parameters OK 12:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:22 Set A/D data flow result=40 12:55:22 Set A/D channel type result=40 12:55:22 Set A/D encoding result=40 12:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:22 Set channel filter=0.000000e+000 result=40 12:55:22 Config A/D Result=40 12:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:22 Get A/D filter: -9.255963e+061 result=40 12:55:22 Get A/D value=-858993460 result=40 12:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:22 Parameters OK 12:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:22 Set A/D data flow result=40 12:55:22 Set A/D channel type result=40 12:55:22 Set A/D encoding result=40 12:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:22 Set channel filter=0.000000e+000 result=40 12:55:22 Config A/D Result=40 12:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:22 Get A/D filter: -9.255963e+061 result=40 12:55:22 Get A/D value=-858993460 result=40 12:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:22 Aux= 12:55:22 Message to Camera, serial 117132 queued 12:55:30 Received message from Master: op=Shutter serial=117142 12:55:30 Shutter LASER close 12:55:31 Received message from Master: op=PointingHead serial=117146 12:55:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:55:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:55:31 Point started: ret=0 12:55:31 point_skyscan result=0 12:55:32 Check angles 12:55:32 SkyScan query 12:55:32 SkyScan query done: ret=0 az=89.79<-5986 ze=157.095<-1527 Statuses=0009 0009 12:55:32 Msec=0 True Az=89.79 Ze=157.095 Az status=0009 Ze status=0009 12:55:33 Check angles 12:55:33 SkyScan query 12:55:33 SkyScan query done: ret=0 az=72.3<-4820 ze=136.14<-2924 Statuses=0009 0009 12:55:33 Msec=750 True Az=72.3 Ze=136.14 Az status=0009 Ze status=0009 12:55:33 Check angles 12:55:33 SkyScan query 12:55:34 SkyScan query done: ret=0 az=54.63<-3642 ze=114.72<-4352 Statuses=0009 0009 12:55:34 Msec=1500 True Az=54.63 Ze=114.72 Az status=0009 Ze status=0009 [UTC 2018-12-13 12:55:34] 12:55:34 Check angles 12:55:34 SkyScan query 12:55:35 SkyScan query done: ret=0 az=41.025<-2735 ze=92.04<-5864 Statuses=0009 0009 12:55:35 Msec=2250 True Az=41.025 Ze=92.04 Az status=0009 Ze status=0009 12:55:35 Check angles 12:55:35 SkyScan query 12:55:35 SkyScan query done: ret=0 az=40.995<-2733 ze=72.81<-7146 Statuses=0008 0009 12:55:35 Msec=3000 True Az=40.995 Ze=72.81 Az status=0008 Ze status=0009 12:55:36 Check angles 12:55:36 SkyScan query 12:55:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.23<-8518 Statuses=0008 0009 12:55:36 Msec=3750 True Az=40.995 Ze=52.23 Az status=0008 Ze status=0009 12:55:36 Check angles 12:55:36 SkyScan query 12:55:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:55:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:55:37 Message to Master queued w/err=0: serial=117146 error=0 12:55:42 Received message from Master: op=Filter serial=117147 12:55:42 Color wheel filter change from 0 to 0 12:55:42 FLIGetFilterPos err=0 currentPosition=0 12:55:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:42 Filter is already there-color wheel unchanged 12:55:42 Received message from Master: op=Shutter serial=117148 12:55:42 Shutter LASER close 12:55:42 Received message from Camera: op=State serial=117150 12:55:42 GetSingleValue result=40 Value=cccccccc 12:55:42 SkyScan query 12:55:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:55:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:43 Parameters OK 12:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:43 Set A/D data flow result=40 12:55:43 Set A/D channel type result=40 12:55:43 Set A/D encoding result=40 12:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:43 Set channel filter=0.000000e+000 result=40 12:55:43 Config A/D Result=40 12:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:43 Get A/D filter: -9.255963e+061 result=40 12:55:43 Get A/D value=-858993460 result=40 12:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:43 Parameters OK 12:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:43 Set A/D data flow result=40 12:55:43 Set A/D channel type result=40 12:55:43 Set A/D encoding result=40 12:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:43 Set channel filter=0.000000e+000 result=40 12:55:43 Config A/D Result=40 12:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:43 Get A/D filter: -9.255963e+061 result=40 12:55:43 Get A/D value=-858993460 result=40 12:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:43 Aux= 12:55:43 Message to Camera, serial 117150 queued [UTC 2018-12-13 12:55:52] 12:56:20 Received message from Master: op=PointingHead serial=117163 12:56:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:56:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:56:20 Point started: ret=0 12:56:20 point_skyscan result=0 12:56:21 Check angles 12:56:21 SkyScan query 12:56:22 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 12:56:22 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 12:56:22 Check angles 12:56:22 SkyScan query 12:56:22 SkyScan query done: ret=0 az=81.72<-5448 ze=66.495<-7567 Statuses=0009 0008 12:56:22 Msec=750 True Az=81.72 Ze=66.495 Az status=0009 Ze status=0008 12:56:22 Check angles 12:56:22 SkyScan query 12:56:23 SkyScan query done: ret=0 az=99.12<-6608 ze=66.495<-7567 Statuses=0009 0008 12:56:23 Msec=1500 True Az=99.12 Ze=66.495 Az status=0009 Ze status=0008 12:56:23 Check angles 12:56:23 SkyScan query 12:56:24 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 12:56:24 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 12:56:24 Check angles 12:56:24 SkyScan query 12:56:25 SkyScan query done: ret=0 az=134.085<-8939 ze=66.495<-7567 Statuses=0009 0008 12:56:25 Msec=3000 True Az=134.085 Ze=66.495 Az status=0009 Ze status=0008 12:56:25 Check angles 12:56:25 SkyScan query 12:56:25 SkyScan query done: ret=0 az=151.515<-10101 ze=66.495<-7567 Statuses=0009 0008 12:56:25 Msec=3750 True Az=151.515 Ze=66.495 Az status=0009 Ze status=0008 12:56:25 Check angles 12:56:25 SkyScan query 12:56:26 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:56:26 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:56:26 Message to Master queued w/err=0: serial=117163 error=0 12:56:31 Received message from Master: op=Filter serial=117164 12:56:31 Color wheel filter change from 0 to 0 12:56:31 FLIGetFilterPos err=0 currentPosition=0 12:56:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:31 Filter is already there-color wheel unchanged 12:56:31 Received message from Master: op=Shutter serial=117165 12:56:31 Shutter LASER close 12:56:31 Received message from Camera: op=State serial=117167 12:56:31 GetSingleValue result=40 Value=cccccccc 12:56:31 SkyScan query 12:56:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:56:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:32 Parameters OK 12:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:32 Set A/D data flow result=40 12:56:32 Set A/D channel type result=40 12:56:32 Set A/D encoding result=40 12:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:32 Set channel filter=0.000000e+000 result=40 12:56:32 Config A/D Result=40 12:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:32 Get A/D filter: -9.255963e+061 result=40 12:56:32 Get A/D value=-858993460 result=40 12:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:32 Parameters OK 12:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:32 Set A/D data flow result=40 12:56:32 Set A/D channel type result=40 12:56:32 Set A/D encoding result=40 12:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:32 Set channel filter=0.000000e+000 result=40 12:56:32 Config A/D Result=40 12:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:32 Get A/D filter: -9.255963e+061 result=40 12:56:32 Get A/D value=-858993460 result=40 12:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:32 Aux= 12:56:32 Message to Camera, serial 117167 queued 12:57:09 Received message from Master: op=PointingHead serial=117180 12:57:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:57:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:57:09 Point started: ret=0 12:57:09 point_skyscan result=0 12:57:10 Check angles 12:57:10 SkyScan query 12:57:10 SkyScan query done: ret=0 az=134.505<-8967 ze=36.15<-9590 Statuses=0009 0009 12:57:10 Msec=0 True Az=134.505 Ze=36.15 Az status=0009 Ze status=0009 12:57:11 Check angles 12:57:11 SkyScan query 12:57:11 SkyScan query done: ret=0 az=117.015<-7801 ze=15.21<-10986 Statuses=0009 0009 12:57:11 Msec=750 True Az=117.015 Ze=15.21 Az status=0009 Ze status=0009 12:57:11 Check angles 12:57:11 SkyScan query 12:57:12 SkyScan query done: ret=0 az=99.645<-6643 ze=-5.76<-12384 Statuses=0009 0009 12:57:12 Msec=1500 True Az=99.645 Ze=-5.76 Az status=0009 Ze status=0009 12:57:12 Check angles 12:57:12 SkyScan query 12:57:13 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.21<-13814 Statuses=0009 0009 12:57:13 Msec=2250 True Az=81.81 Ze=-27.21 Az status=0009 Ze status=0009 12:57:13 Check angles 12:57:13 SkyScan query 12:57:13 SkyScan query done: ret=0 az=64.2<-4280 ze=-38.58<-14572 Statuses=0009 0008 12:57:13 Msec=3000 True Az=64.2 Ze=-38.58 Az status=0009 Ze status=0008 12:57:14 Check angles 12:57:14 SkyScan query 12:57:14 SkyScan query done: ret=0 az=46.785<-3119 ze=-38.52<-14568 Statuses=0009 0008 12:57:14 Msec=3750 True Az=46.785 Ze=-38.52 Az status=0009 Ze status=0008 12:57:14 Check angles 12:57:14 SkyScan query 12:57:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:57:15 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:57:15 Message to Master queued w/err=0: serial=117180 error=0 12:57:20 Received message from Master: op=Filter serial=117181 12:57:20 Color wheel filter change from 0 to 0 12:57:20 FLIGetFilterPos err=0 currentPosition=0 12:57:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:20 Filter is already there-color wheel unchanged 12:57:20 Received message from Master: op=Shutter serial=117182 12:57:20 Shutter LASER close 12:57:20 Received message from Camera: op=State serial=117184 12:57:20 GetSingleValue result=40 Value=cccccccc 12:57:20 SkyScan query 12:57:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:57:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:21 Parameters OK 12:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:21 Set A/D data flow result=40 12:57:21 Set A/D channel type result=40 12:57:21 Set A/D encoding result=40 12:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:21 Set channel filter=0.000000e+000 result=40 12:57:21 Config A/D Result=40 12:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:21 Get A/D filter: -9.255963e+061 result=40 12:57:21 Get A/D value=-858993460 result=40 12:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:21 Parameters OK 12:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:21 Set A/D data flow result=40 12:57:21 Set A/D channel type result=40 12:57:21 Set A/D encoding result=40 12:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:21 Set channel filter=0.000000e+000 result=40 12:57:21 Config A/D Result=40 12:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:21 Get A/D filter: -9.255963e+061 result=40 12:57:21 Get A/D value=-858993460 result=40 12:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:21 Aux= 12:57:21 Message to Camera, serial 117184 queued 12:57:57 Received message from Master: op=PointingHead serial=117197 12:57:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:57:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:57:58 Point started: ret=0 12:57:58 point_skyscan result=0 12:57:59 Check angles 12:57:59 SkyScan query 12:57:59 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.52<-16568 Statuses=0009 0009 12:57:59 Msec=0 True Az=64.185 Ze=-68.52 Az status=0009 Ze status=0009 12:57:59 Check angles 12:57:59 SkyScan query 12:58:00 SkyScan query done: ret=0 az=82.035<-5469 ze=-89.895<-17993 Statuses=0009 0009 12:58:00 Msec=750 True Az=82.035 Ze=-89.895 Az status=0009 Ze status=0009 12:58:00 Check angles 12:58:00 SkyScan query 12:58:01 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.88<-19392 Statuses=0009 0009 12:58:01 Msec=1500 True Az=99.435 Ze=-110.88 Az status=0009 Ze status=0009 12:58:01 Check angles 12:58:01 SkyScan query 12:58:01 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.775<-20785 Statuses=0009 0009 12:58:01 Msec=2250 True Az=117.06 Ze=-131.775 Az status=0009 Ze status=0009 12:58:02 Check angles 12:58:02 SkyScan query 12:58:02 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 12:58:02 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 12:58:02 Check angles 12:58:02 SkyScan query 12:58:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:58:03 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:58:03 Message to Master queued w/err=0: serial=117197 error=0 12:58:08 Received message from Master: op=Filter serial=117198 12:58:08 Color wheel filter change from 0 to 0 12:58:08 FLIGetFilterPos err=0 currentPosition=0 12:58:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:08 Filter is already there-color wheel unchanged 12:58:08 Received message from Master: op=Shutter serial=117199 12:58:08 Shutter LASER close 12:58:08 Received message from Camera: op=State serial=117201 12:58:08 GetSingleValue result=40 Value=cccccccc 12:58:08 SkyScan query 12:58:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:58:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:09 Parameters OK 12:58:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:09 Set A/D data flow result=40 12:58:09 Set A/D channel type result=40 12:58:09 Set A/D encoding result=40 12:58:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:09 Set channel filter=0.000000e+000 result=40 12:58:09 Config A/D Result=40 12:58:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:09 Get A/D filter: -9.255963e+061 result=40 12:58:09 Get A/D value=-858993460 result=40 12:58:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:09 Parameters OK 12:58:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:09 Set A/D data flow result=40 12:58:09 Set A/D channel type result=40 12:58:09 Set A/D encoding result=40 12:58:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:09 Set channel filter=0.000000e+000 result=40 12:58:09 Config A/D Result=40 12:58:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:09 Get A/D filter: -9.255963e+061 result=40 12:58:09 Get A/D value=-858993460 result=40 12:58:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:09 Aux= 12:58:09 Message to Camera, serial 117201 queued 12:58:46 Received message from Master: op=PointingHead serial=117214 12:58:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:58:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:58:46 Point started: ret=0 12:58:46 point_skyscan result=0 12:58:47 Check angles 12:58:47 SkyScan query 12:58:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 12:58:47 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 12:58:47 Check angles 12:58:47 SkyScan query 12:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:58:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:58:48 Message to Master queued w/err=0: serial=117214 error=0 12:58:53 Received message from Master: op=Filter serial=117215 12:58:53 Color wheel filter change from 0 to 0 12:58:53 FLIGetFilterPos err=0 currentPosition=0 12:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:53 Filter is already there-color wheel unchanged 12:58:53 Received message from Master: op=Shutter serial=117216 12:58:53 Shutter LASER open 12:58:54 Received message from Camera: op=State serial=117218 12:58:54 GetSingleValue result=40 Value=cccccccc 12:58:54 SkyScan query 12:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:54 Parameters OK 12:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:54 Set A/D data flow result=40 12:58:54 Set A/D channel type result=40 12:58:54 Set A/D encoding result=40 12:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:54 Set channel filter=0.000000e+000 result=40 12:58:54 Config A/D Result=40 12:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:54 Get A/D filter: -9.255963e+061 result=40 12:58:54 Get A/D value=-858993460 result=40 12:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:54 Parameters OK 12:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:54 Set A/D data flow result=40 12:58:54 Set A/D channel type result=40 12:58:54 Set A/D encoding result=40 12:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:54 Set channel filter=0.000000e+000 result=40 12:58:54 Config A/D Result=40 12:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:54 Get A/D filter: -9.255963e+061 result=40 12:58:54 Get A/D value=-858993460 result=40 12:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:54 Aux= 12:58:54 Message to Camera, serial 117218 queued 12:59:02 Received message from Master: op=Shutter serial=117227 12:59:02 Shutter LASER close 12:59:02 Received message from Master: op=PointingHead serial=117231 12:59:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:59:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:59:03 Point started: ret=0 12:59:03 point_skyscan result=0 12:59:03 Check angles 12:59:03 SkyScan query 12:59:04 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.115<-21541 Statuses=0009 0009 12:59:04 Msec=0 True Az=136.155 Ze=-143.115 Az status=0009 Ze status=0009 12:59:04 Check angles 12:59:04 SkyScan query 12:59:05 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.725<-20115 Statuses=0009 0009 12:59:05 Msec=750 True Az=153.885 Ze=-121.725 Az status=0009 Ze status=0009 12:59:05 Check angles 12:59:05 SkyScan query 12:59:06 SkyScan query done: ret=0 az=171.9<-11460 ze=-99.885<-18659 Statuses=0009 0009 12:59:06 Msec=1500 True Az=171.9 Ze=-99.885 Az status=0009 Ze status=0009 12:59:06 Check angles 12:59:06 SkyScan query 12:59:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.365<-17291 Statuses=0008 0009 12:59:06 Msec=2250 True Az=176.01 Ze=-79.365 Az status=0008 Ze status=0009 12:59:06 Check angles 12:59:06 SkyScan query 12:59:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.395<-15893 Statuses=0008 0009 12:59:07 Msec=3000 True Az=176.01 Ze=-58.395 Az status=0008 Ze status=0009 12:59:07 Check angles 12:59:07 SkyScan query 12:59:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:59:08 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:59:08 Message to Master queued w/err=0: serial=117231 error=0 12:59:13 Received message from Master: op=Filter serial=117232 12:59:13 Color wheel filter change from 0 to 0 12:59:13 FLIGetFilterPos err=0 currentPosition=0 12:59:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:13 Filter is already there-color wheel unchanged 12:59:13 Received message from Master: op=Shutter serial=117233 12:59:13 Shutter LASER close 12:59:13 Received message from Camera: op=State serial=117235 12:59:13 GetSingleValue result=40 Value=cccccccc 12:59:13 SkyScan query 12:59:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:59:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:14 Parameters OK 12:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:14 Set A/D data flow result=40 12:59:14 Set A/D channel type result=40 12:59:14 Set A/D encoding result=40 12:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:14 Set channel filter=0.000000e+000 result=40 12:59:14 Config A/D Result=40 12:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:14 Get A/D filter: -9.255963e+061 result=40 12:59:14 Get A/D value=-858993460 result=40 12:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:14 Parameters OK 12:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:14 Set A/D data flow result=40 12:59:14 Set A/D channel type result=40 12:59:14 Set A/D encoding result=40 12:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:14 Set channel filter=0.000000e+000 result=40 12:59:14 Config A/D Result=40 12:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:14 Get A/D filter: -9.255963e+061 result=40 12:59:14 Get A/D value=-858993460 result=40 12:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:14 Aux= 12:59:14 Message to Camera, serial 117235 queued 12:59:51 Received message from Master: op=PointingHead serial=117248 12:59:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:59:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:59:51 Point started: ret=0 12:59:51 point_skyscan result=0 12:59:52 Check angles 12:59:52 SkyScan query 12:59:52 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.165<-13411 Statuses=0009 0009 12:59:52 Msec=0 True Az=152.58 Ze=-21.165 Az status=0009 Ze status=0009 12:59:52 Check angles 12:59:52 SkyScan query 12:59:53 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.21<-12014 Statuses=0009 0009 12:59:53 Msec=750 True Az=135.045 Ze=-0.21 Az status=0009 Ze status=0009 12:59:53 Check angles 12:59:53 SkyScan query 12:59:54 SkyScan query done: ret=0 az=117.555<-7837 ze=20.73<-10618 Statuses=0009 0009 12:59:54 Msec=1500 True Az=117.555 Ze=20.73 Az status=0009 Ze status=0009 12:59:54 Check angles 12:59:54 SkyScan query 12:59:55 SkyScan query done: ret=0 az=100.2<-6680 ze=41.685<-9221 Statuses=0009 0009 12:59:55 Msec=2250 True Az=100.2 Ze=41.685 Az status=0009 Ze status=0009 12:59:55 Check angles 12:59:55 SkyScan query 12:59:55 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:59:55 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:59:55 Check angles 12:59:55 SkyScan query 12:59:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:59:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:59:56 Message to Master queued w/err=0: serial=117248 error=0 13:00:01 Received message from Master: op=Filter serial=117249 13:00:01 Color wheel filter change from 0 to 0 13:00:01 FLIGetFilterPos err=0 currentPosition=0 13:00:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:01 Filter is already there-color wheel unchanged 13:00:01 Received message from Master: op=Shutter serial=117250 13:00:01 Shutter LASER close 13:00:01 Received message from Camera: op=State serial=117252 13:00:01 GetSingleValue result=40 Value=cccccccc 13:00:01 SkyScan query 13:00:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:00:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:02 Parameters OK 13:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:02 Set A/D data flow result=40 13:00:02 Set A/D channel type result=40 13:00:02 Set A/D encoding result=40 13:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:02 Set channel filter=0.000000e+000 result=40 13:00:02 Config A/D Result=40 13:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:02 Get A/D filter: -9.255963e+061 result=40 13:00:02 Get A/D value=-858993460 result=40 13:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:02 Parameters OK 13:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:02 Set A/D data flow result=40 13:00:02 Set A/D channel type result=40 13:00:02 Set A/D encoding result=40 13:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:02 Set channel filter=0.000000e+000 result=40 13:00:02 Config A/D Result=40 13:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:02 Get A/D filter: -9.255963e+061 result=40 13:00:02 Get A/D value=-858993460 result=40 13:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:02 Aux= 13:00:02 Message to Camera, serial 117252 queued 13:00:39 Received message from Master: op=PointingHead serial=117265 13:00:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:00:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:00:39 Point started: ret=0 13:00:39 point_skyscan result=0 13:00:40 Check angles 13:00:40 SkyScan query 13:00:40 SkyScan query done: ret=0 az=108.69<-7246 ze=38.49<-9434 Statuses=0009 0008 13:00:40 Msec=0 True Az=108.69 Ze=38.49 Az status=0009 Ze status=0008 13:00:41 Check angles 13:00:41 SkyScan query 13:00:41 SkyScan query done: ret=0 az=126.225<-8415 ze=38.505<-9433 Statuses=0009 0008 13:00:41 Msec=750 True Az=126.225 Ze=38.505 Az status=0009 Ze status=0008 13:00:41 Check angles 13:00:41 SkyScan query 13:00:42 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 13:00:42 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 13:00:42 Check angles 13:00:42 SkyScan query 13:00:43 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 13:00:43 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 13:00:43 Check angles 13:00:43 SkyScan query 13:00:43 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:00:43 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:00:44 Check angles 13:00:44 SkyScan query 13:00:44 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:00:44 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:00:44 Message to Master queued w/err=0: serial=117265 error=0 13:00:49 Received message from Master: op=Filter serial=117266 13:00:49 Color wheel filter change from 0 to 0 13:00:49 FLIGetFilterPos err=0 currentPosition=0 13:00:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:49 Filter is already there-color wheel unchanged 13:00:49 Received message from Master: op=Shutter serial=117267 13:00:49 Shutter LASER close 13:00:49 Received message from Camera: op=State serial=117269 13:00:49 GetSingleValue result=40 Value=cccccccc 13:00:49 SkyScan query 13:00:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:00:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:50 Parameters OK 13:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:50 Set A/D data flow result=40 13:00:50 Set A/D channel type result=40 13:00:50 Set A/D encoding result=40 13:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:50 Set channel filter=0.000000e+000 result=40 13:00:50 Config A/D Result=40 13:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:50 Get A/D filter: -9.255963e+061 result=40 13:00:50 Get A/D value=-858993460 result=40 13:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:50 Parameters OK 13:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:50 Set A/D data flow result=40 13:00:50 Set A/D channel type result=40 13:00:50 Set A/D encoding result=40 13:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:50 Set channel filter=0.000000e+000 result=40 13:00:50 Config A/D Result=40 13:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:50 Get A/D filter: -9.255963e+061 result=40 13:00:50 Get A/D value=-858993460 result=40 13:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:50 Aux= 13:00:50 Message to Camera, serial 117269 queued 13:01:27 Received message from Master: op=PointingHead serial=117282 13:01:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:01:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:01:27 Point started: ret=0 13:01:27 point_skyscan result=0 13:01:28 Check angles 13:01:28 SkyScan query 13:01:28 SkyScan query done: ret=0 az=153.18<-10212 ze=8.865<-11409 Statuses=0009 0009 13:01:28 Msec=0 True Az=153.18 Ze=8.865 Az status=0009 Ze status=0009 13:01:29 Check angles 13:01:29 SkyScan query 13:01:29 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.105<-12807 Statuses=0009 0009 13:01:29 Msec=750 True Az=135.735 Ze=-12.105 Az status=0009 Ze status=0009 13:01:29 Check angles 13:01:29 SkyScan query 13:01:30 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.45<-14230 Statuses=0009 0009 13:01:30 Msec=1500 True Az=117.795 Ze=-33.45 Az status=0009 Ze status=0009 13:01:30 Check angles 13:01:30 SkyScan query 13:01:31 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.555<-15437 Statuses=0009 0009 13:01:31 Msec=2250 True Az=100.32 Ze=-51.555 Az status=0009 Ze status=0009 13:01:31 Check angles 13:01:31 SkyScan query 13:01:32 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:01:32 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:01:32 Check angles 13:01:32 SkyScan query 13:01:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:01:32 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:01:32 Message to Master queued w/err=0: serial=117282 error=0 13:01:37 Received message from Master: op=Filter serial=117283 13:01:37 Color wheel filter change from 0 to 0 13:01:37 FLIGetFilterPos err=0 currentPosition=0 13:01:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:37 Filter is already there-color wheel unchanged 13:01:37 Received message from Master: op=Shutter serial=117284 13:01:37 Shutter LASER close 13:01:37 Received message from Camera: op=State serial=117286 13:01:37 GetSingleValue result=40 Value=cccccccc 13:01:37 SkyScan query 13:01:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:01:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:38 Parameters OK 13:01:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:38 Set A/D data flow result=40 13:01:38 Set A/D channel type result=40 13:01:38 Set A/D encoding result=40 13:01:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:38 Set channel filter=0.000000e+000 result=40 13:01:38 Config A/D Result=40 13:01:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:38 Get A/D filter: -9.255963e+061 result=40 13:01:38 Get A/D value=-858993460 result=40 13:01:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:38 Parameters OK 13:01:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:38 Set A/D data flow result=40 13:01:38 Set A/D channel type result=40 13:01:38 Set A/D encoding result=40 13:01:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:38 Set channel filter=0.000000e+000 result=40 13:01:38 Config A/D Result=40 13:01:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:38 Get A/D filter: -9.255963e+061 result=40 13:01:38 Get A/D value=-858993460 result=40 13:01:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:38 Aux= 13:01:38 Message to Camera, serial 117286 queued 13:02:15 Received message from Master: op=PointingHead serial=117299 13:02:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:02:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:02:15 Point started: ret=0 13:02:15 point_skyscan result=0 13:02:16 Check angles 13:02:16 SkyScan query 13:02:17 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.105<-17407 Statuses=0009 0009 13:02:17 Msec=0 True Az=108.945 Ze=-81.105 Az status=0009 Ze status=0009 13:02:17 Check angles 13:02:17 SkyScan query 13:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 13:02:17 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 13:02:18 Check angles 13:02:18 SkyScan query 13:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 13:02:18 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 13:02:18 Check angles 13:02:18 SkyScan query 13:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.26<-21684 Statuses=0008 0009 13:02:19 Msec=2250 True Az=112.995 Ze=-145.26 Az status=0008 Ze status=0009 13:02:19 Check angles 13:02:19 SkyScan query 13:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.2<-23080 Statuses=0008 0009 13:02:20 Msec=3000 True Az=112.995 Ze=-166.2 Az status=0008 Ze status=0009 13:02:20 Check angles 13:02:20 SkyScan query 13:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:02:20 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:02:20 Message to Master queued w/err=0: serial=117299 error=0 13:02:25 Received message from Master: op=Filter serial=117300 13:02:25 Color wheel filter change from 0 to 0 13:02:25 FLIGetFilterPos err=0 currentPosition=0 13:02:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:25 Filter is already there-color wheel unchanged 13:02:26 Received message from Master: op=Shutter serial=117301 13:02:26 Shutter LASER open 13:02:26 Received message from Camera: op=State serial=117303 13:02:26 GetSingleValue result=40 Value=cccccccc 13:02:26 SkyScan query 13:02:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:02:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:26 Parameters OK 13:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:26 Set A/D data flow result=40 13:02:26 Set A/D channel type result=40 13:02:26 Set A/D encoding result=40 13:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:26 Set channel filter=0.000000e+000 result=40 13:02:26 Config A/D Result=40 13:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:26 Get A/D filter: -9.255963e+061 result=40 13:02:26 Get A/D value=-858993460 result=40 13:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:26 Parameters OK 13:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:26 Set A/D data flow result=40 13:02:26 Set A/D channel type result=40 13:02:26 Set A/D encoding result=40 13:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:26 Set channel filter=0.000000e+000 result=40 13:02:26 Config A/D Result=40 13:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:26 Get A/D filter: -9.255963e+061 result=40 13:02:26 Get A/D value=-858993460 result=40 13:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:26 Aux= 13:02:26 Message to Camera, serial 117303 queued 13:02:35 Received message from Master: op=Shutter serial=117313 13:02:35 Shutter LASER close 13:02:35 Received message from Master: op=PointingHead serial=117317 13:02:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:02:35 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:02:35 Point started: ret=0 13:02:35 point_skyscan result=0 13:02:36 Check angles 13:02:36 SkyScan query 13:02:37 SkyScan query done: ret=0 az=89.85<-5990 ze=157.275<-1515 Statuses=0009 0009 13:02:37 Msec=0 True Az=89.85 Ze=157.275 Az status=0009 Ze status=0009 13:02:37 Check angles 13:02:37 SkyScan query 13:02:38 SkyScan query done: ret=0 az=72.54<-4836 ze=136.305<-2913 Statuses=0009 0009 13:02:38 Msec=750 True Az=72.54 Ze=136.305 Az status=0009 Ze status=0009 13:02:38 Check angles 13:02:38 SkyScan query 13:02:38 SkyScan query done: ret=0 az=54.795<-3653 ze=114.93<-4338 Statuses=0009 0009 13:02:38 Msec=1500 True Az=54.795 Ze=114.93 Az status=0009 Ze status=0009 13:02:38 Check angles 13:02:38 SkyScan query 13:02:39 SkyScan query done: ret=0 az=40.92<-2728 ze=93.96<-5736 Statuses=0009 0009 13:02:39 Msec=2250 True Az=40.92 Ze=93.96 Az status=0009 Ze status=0009 13:02:39 Check angles 13:02:39 SkyScan query 13:02:40 SkyScan query done: ret=0 az=40.995<-2733 ze=72.99<-7134 Statuses=0008 0009 13:02:40 Msec=3000 True Az=40.995 Ze=72.99 Az status=0008 Ze status=0009 13:02:40 Check angles 13:02:40 SkyScan query 13:02:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 13:02:41 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 13:02:41 Check angles 13:02:41 SkyScan query 13:02:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:02:41 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:02:41 Message to Master queued w/err=0: serial=117317 error=0 13:02:46 Received message from Master: op=Filter serial=117318 13:02:46 Color wheel filter change from 0 to 0 13:02:46 FLIGetFilterPos err=0 currentPosition=0 13:02:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:46 Filter is already there-color wheel unchanged 13:02:47 Received message from Master: op=Shutter serial=117319 13:02:47 Shutter LASER close 13:02:47 Received message from Camera: op=State serial=117321 13:02:47 GetSingleValue result=40 Value=cccccccc 13:02:47 SkyScan query 13:02:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:02:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:47 Parameters OK 13:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:47 Set A/D data flow result=40 13:02:47 Set A/D channel type result=40 13:02:47 Set A/D encoding result=40 13:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:47 Set channel filter=0.000000e+000 result=40 13:02:47 Config A/D Result=40 13:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:47 Get A/D filter: -9.255963e+061 result=40 13:02:47 Get A/D value=-858993460 result=40 13:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:47 Parameters OK 13:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:47 Set A/D data flow result=40 13:02:47 Set A/D channel type result=40 13:02:47 Set A/D encoding result=40 13:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:47 Set channel filter=0.000000e+000 result=40 13:02:47 Config A/D Result=40 13:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:47 Get A/D filter: -9.255963e+061 result=40 13:02:47 Get A/D value=-858993460 result=40 13:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:47 Aux= 13:02:47 Message to Camera, serial 117321 queued 13:03:24 Received message from Master: op=PointingHead serial=117334 13:03:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:03:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:03:24 Point started: ret=0 13:03:24 point_skyscan result=0 13:03:25 Check angles 13:03:25 SkyScan query 13:03:26 SkyScan query done: ret=0 az=64.26<-4284 ze=66.555<-7563 Statuses=0009 0008 13:03:26 Msec=0 True Az=64.26 Ze=66.555 Az status=0009 Ze status=0008 13:03:26 Check angles 13:03:26 SkyScan query 13:03:27 SkyScan query done: ret=0 az=81.735<-5449 ze=66.495<-7567 Statuses=0009 0008 13:03:27 Msec=750 True Az=81.735 Ze=66.495 Az status=0009 Ze status=0008 13:03:27 Check angles 13:03:27 SkyScan query 13:03:27 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 13:03:27 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 13:03:28 Check angles 13:03:28 SkyScan query 13:03:28 SkyScan query done: ret=0 az=117.51<-7834 ze=66.495<-7567 Statuses=0009 0008 13:03:28 Msec=2250 True Az=117.51 Ze=66.495 Az status=0009 Ze status=0008 13:03:28 Check angles 13:03:28 SkyScan query 13:03:29 SkyScan query done: ret=0 az=135.33<-9022 ze=66.495<-7567 Statuses=0009 0008 13:03:29 Msec=3000 True Az=135.33 Ze=66.495 Az status=0009 Ze status=0008 13:03:29 Check angles 13:03:29 SkyScan query 13:03:30 SkyScan query done: ret=0 az=152.67<-10178 ze=66.495<-7567 Statuses=0009 0008 13:03:30 Msec=3750 True Az=152.67 Ze=66.495 Az status=0009 Ze status=0008 13:03:30 Check angles 13:03:30 SkyScan query 13:03:30 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:03:30 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:03:30 Message to Master queued w/err=0: serial=117334 error=0 13:03:35 Received message from Master: op=Filter serial=117335 13:03:35 Color wheel filter change from 0 to 0 13:03:35 FLIGetFilterPos err=0 currentPosition=0 13:03:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:35 Filter is already there-color wheel unchanged 13:03:36 Received message from Master: op=Shutter serial=117336 13:03:36 Shutter LASER close 13:03:36 Received message from Camera: op=State serial=117338 13:03:36 GetSingleValue result=40 Value=cccccccc 13:03:36 SkyScan query 13:03:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:03:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:36 Parameters OK 13:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:36 Set A/D data flow result=40 13:03:36 Set A/D channel type result=40 13:03:36 Set A/D encoding result=40 13:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:36 Set channel filter=0.000000e+000 result=40 13:03:36 Config A/D Result=40 13:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:36 Get A/D filter: -9.255963e+061 result=40 13:03:36 Get A/D value=-858993460 result=40 13:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:36 Parameters OK 13:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:36 Set A/D data flow result=40 13:03:36 Set A/D channel type result=40 13:03:36 Set A/D encoding result=40 13:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:36 Set channel filter=0.000000e+000 result=40 13:03:36 Config A/D Result=40 13:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:36 Get A/D filter: -9.255963e+061 result=40 13:03:36 Get A/D value=-858993460 result=40 13:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:36 Aux= 13:03:36 Message to Camera, serial 117338 queued 13:04:13 Received message from Master: op=PointingHead serial=117351 13:04:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:04:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:04:13 Point started: ret=0 13:04:13 point_skyscan result=0 13:04:14 Check angles 13:04:14 SkyScan query 13:04:15 SkyScan query done: ret=0 az=134.475<-8965 ze=36.255<-9583 Statuses=0009 0009 13:04:15 Msec=0 True Az=134.475 Ze=36.255 Az status=0009 Ze status=0009 13:04:15 Check angles 13:04:15 SkyScan query 13:04:15 SkyScan query done: ret=0 az=116.625<-7775 ze=14.82<-11012 Statuses=0009 0009 13:04:15 Msec=750 True Az=116.625 Ze=14.82 Az status=0009 Ze status=0009 13:04:16 Check angles 13:04:16 SkyScan query 13:04:16 SkyScan query done: ret=0 az=99.24<-6616 ze=-6.12<-12408 Statuses=0009 0009 13:04:16 Msec=1500 True Az=99.24 Ze=-6.12 Az status=0009 Ze status=0009 13:04:16 Check angles 13:04:16 SkyScan query 13:04:17 SkyScan query done: ret=0 az=81.78<-5452 ze=-27.105<-13807 Statuses=0009 0009 13:04:17 Msec=2250 True Az=81.78 Ze=-27.105 Az status=0009 Ze status=0009 13:04:17 Check angles 13:04:17 SkyScan query 13:04:18 SkyScan query done: ret=0 az=64.185<-4279 ze=-38.58<-14572 Statuses=0009 0008 13:04:18 Msec=3000 True Az=64.185 Ze=-38.58 Az status=0009 Ze status=0008 13:04:18 Check angles 13:04:18 SkyScan query 13:04:18 SkyScan query done: ret=0 az=46.755<-3117 ze=-38.52<-14568 Statuses=0009 0008 13:04:18 Msec=3750 True Az=46.755 Ze=-38.52 Az status=0009 Ze status=0008 13:04:19 Check angles 13:04:19 SkyScan query 13:04:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:04:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:04:19 Message to Master queued w/err=0: serial=117351 error=0 13:04:24 Received message from Master: op=Filter serial=117352 13:04:24 Color wheel filter change from 0 to 0 13:04:24 FLIGetFilterPos err=0 currentPosition=0 13:04:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:24 Filter is already there-color wheel unchanged 13:04:24 Received message from Master: op=Shutter serial=117353 13:04:24 Shutter LASER close 13:04:24 Received message from Camera: op=State serial=117355 13:04:24 GetSingleValue result=40 Value=cccccccc 13:04:24 SkyScan query 13:04:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:04:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:25 Parameters OK 13:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:25 Set A/D data flow result=40 13:04:25 Set A/D channel type result=40 13:04:25 Set A/D encoding result=40 13:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:25 Set channel filter=0.000000e+000 result=40 13:04:25 Config A/D Result=40 13:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:25 Get A/D filter: -9.255963e+061 result=40 13:04:25 Get A/D value=-858993460 result=40 13:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:25 Parameters OK 13:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:25 Set A/D data flow result=40 13:04:25 Set A/D channel type result=40 13:04:25 Set A/D encoding result=40 13:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:25 Set channel filter=0.000000e+000 result=40 13:04:25 Config A/D Result=40 13:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:25 Get A/D filter: -9.255963e+061 result=40 13:04:25 Get A/D value=-858993460 result=40 13:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:25 Aux= 13:04:25 Message to Camera, serial 117355 queued 13:05:02 Received message from Master: op=PointingHead serial=117368 13:05:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:05:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:05:02 Point started: ret=0 13:05:02 point_skyscan result=0 13:05:03 Check angles 13:05:03 SkyScan query 13:05:03 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.25<-16550 Statuses=0009 0009 13:05:03 Msec=0 True Az=63.945 Ze=-68.25 Az status=0009 Ze status=0009 13:05:04 Check angles 13:05:04 SkyScan query 13:05:04 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.67<-17978 Statuses=0009 0009 13:05:04 Msec=750 True Az=81.765 Ze=-89.67 Az status=0009 Ze status=0009 13:05:04 Check angles 13:05:04 SkyScan query 13:05:05 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.64<-19376 Statuses=0009 0009 13:05:05 Msec=1500 True Az=99.195 Ze=-110.64 Az status=0009 Ze status=0009 13:05:05 Check angles 13:05:05 SkyScan query 13:05:06 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.55<-20770 Statuses=0009 0009 13:05:06 Msec=2250 True Az=116.715 Ze=-131.55 Az status=0009 Ze status=0009 13:05:06 Check angles 13:05:06 SkyScan query 13:05:07 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 13:05:07 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 13:05:07 Check angles 13:05:07 SkyScan query 13:05:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:05:07 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:05:07 Message to Master queued w/err=0: serial=117368 error=0 13:05:12 Received message from Master: op=Filter serial=117369 13:05:12 Color wheel filter change from 0 to 0 13:05:12 FLIGetFilterPos err=0 currentPosition=0 13:05:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:12 Filter is already there-color wheel unchanged 13:05:12 Received message from Master: op=Shutter serial=117370 13:05:12 Shutter LASER close 13:05:12 Received message from Camera: op=State serial=117372 13:05:12 GetSingleValue result=40 Value=cccccccc 13:05:12 SkyScan query 13:05:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:05:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:13 Parameters OK 13:05:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:13 Set A/D data flow result=40 13:05:13 Set A/D channel type result=40 13:05:13 Set A/D encoding result=40 13:05:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:13 Set channel filter=0.000000e+000 result=40 13:05:13 Config A/D Result=40 13:05:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:13 Get A/D filter: -9.255963e+061 result=40 13:05:13 Get A/D value=-858993460 result=40 13:05:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:13 Parameters OK 13:05:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:13 Set A/D data flow result=40 13:05:13 Set A/D channel type result=40 13:05:13 Set A/D encoding result=40 13:05:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:13 Set channel filter=0.000000e+000 result=40 13:05:13 Config A/D Result=40 13:05:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:13 Get A/D filter: -9.255963e+061 result=40 13:05:13 Get A/D value=-858993460 result=40 13:05:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:13 Aux= 13:05:13 Message to Camera, serial 117372 queued 13:05:50 Received message from Master: op=PointingHead serial=117385 13:05:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:05:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:05:50 Point started: ret=0 13:05:50 point_skyscan result=0 13:05:51 Check angles 13:05:51 SkyScan query 13:05:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 13:05:52 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 13:05:52 Check angles 13:05:52 SkyScan query 13:05:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:05:52 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:05:52 Message to Master queued w/err=0: serial=117385 error=0 13:05:57 Received message from Master: op=Filter serial=117386 13:05:57 Color wheel filter change from 0 to 0 13:05:57 FLIGetFilterPos err=0 currentPosition=0 13:05:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:57 Filter is already there-color wheel unchanged 13:05:57 Received message from Master: op=Shutter serial=117387 13:05:57 Shutter LASER open 13:05:58 Received message from Camera: op=State serial=117389 13:05:58 GetSingleValue result=40 Value=cccccccc 13:05:58 SkyScan query 13:05:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:05:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:58 Parameters OK 13:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:58 Set A/D data flow result=40 13:05:58 Set A/D channel type result=40 13:05:58 Set A/D encoding result=40 13:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:58 Set channel filter=0.000000e+000 result=40 13:05:58 Config A/D Result=40 13:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:58 Get A/D filter: -9.255963e+061 result=40 13:05:58 Get A/D value=-858993460 result=40 13:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:58 Parameters OK 13:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:58 Set A/D data flow result=40 13:05:58 Set A/D channel type result=40 13:05:58 Set A/D encoding result=40 13:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:58 Set channel filter=0.000000e+000 result=40 13:05:58 Config A/D Result=40 13:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:58 Get A/D filter: -9.255963e+061 result=40 13:05:58 Get A/D value=-858993460 result=40 13:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:58 Aux= 13:05:58 Message to Camera, serial 117389 queued 13:06:06 Received message from Master: op=Shutter serial=117398 13:06:06 Shutter LASER close 13:06:06 Received message from Master: op=PointingHead serial=117402 13:06:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:06:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:06:07 Point started: ret=0 13:06:07 point_skyscan result=0 13:06:07 Check angles 13:06:07 SkyScan query 13:06:08 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.355<-21557 Statuses=0009 0009 13:06:08 Msec=0 True Az=135.93 Ze=-143.355 Az status=0009 Ze status=0009 13:06:08 Check angles 13:06:08 SkyScan query [UTC 2018-12-13 13:06:09] 13:06:09 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.34<-20156 Statuses=0009 0009 13:06:09 Msec=750 True Az=153.39 Ze=-122.34 Az status=0009 Ze status=0009 13:06:09 Check angles 13:06:09 SkyScan query 13:06:10 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.46<-18764 Statuses=0009 0009 13:06:10 Msec=1500 True Az=170.835 Ze=-101.46 Az status=0009 Ze status=0009 13:06:10 Check angles 13:06:10 SkyScan query 13:06:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.46<-17364 Statuses=0008 0009 13:06:10 Msec=2250 True Az=176.01 Ze=-80.46 Az status=0008 Ze status=0009 13:06:10 Check angles 13:06:10 SkyScan query 13:06:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.52<-15968 Statuses=0008 0009 13:06:11 Msec=3000 True Az=176.01 Ze=-59.52 Az status=0008 Ze status=0009 13:06:11 Check angles 13:06:11 SkyScan query 13:06:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:06:12 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:06:12 Message to Master queued w/err=0: serial=117402 error=0 13:06:17 Received message from Master: op=Filter serial=117403 13:06:17 Color wheel filter change from 0 to 0 13:06:17 FLIGetFilterPos err=0 currentPosition=0 13:06:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:17 Filter is already there-color wheel unchanged 13:06:17 Received message from Master: op=Shutter serial=117404 13:06:17 Shutter LASER close 13:06:17 Received message from Camera: op=State serial=117406 13:06:17 GetSingleValue result=40 Value=cccccccc 13:06:17 SkyScan query 13:06:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:06:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:18 Parameters OK 13:06:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:18 Set A/D data flow result=40 13:06:18 Set A/D channel type result=40 13:06:18 Set A/D encoding result=40 13:06:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:18 Set channel filter=0.000000e+000 result=40 13:06:18 Config A/D Result=40 13:06:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:18 Get A/D filter: -9.255963e+061 result=40 13:06:18 Get A/D value=-858993460 result=40 13:06:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:18 Parameters OK 13:06:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:18 Set A/D data flow result=40 13:06:18 Set A/D channel type result=40 13:06:18 Set A/D encoding result=40 13:06:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:18 Set channel filter=0.000000e+000 result=40 13:06:18 Config A/D Result=40 13:06:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:18 Get A/D filter: -9.255963e+061 result=40 13:06:18 Get A/D value=-858993460 result=40 13:06:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:18 Aux= 13:06:18 Message to Camera, serial 117406 queued 13:06:55 Received message from Master: op=PointingHead serial=117419 13:06:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:06:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:06:55 Point started: ret=0 13:06:55 point_skyscan result=0 13:06:56 Check angles 13:06:56 SkyScan query 13:06:56 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.765<-13451 Statuses=0009 0009 13:06:56 Msec=0 True Az=152.97 Ze=-21.765 Az status=0009 Ze status=0009 13:06:56 Check angles 13:06:56 SkyScan query 13:06:57 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.78<-12052 Statuses=0009 0009 13:06:57 Msec=750 True Az=135.57 Ze=-0.78 Az status=0009 Ze status=0009 13:06:57 Check angles 13:06:57 SkyScan query 13:06:58 SkyScan query done: ret=0 az=117.585<-7839 ze=20.61<-10626 Statuses=0009 0009 13:06:58 Msec=1500 True Az=117.585 Ze=20.61 Az status=0009 Ze status=0009 13:06:58 Check angles 13:06:58 SkyScan query 13:06:58 SkyScan query done: ret=0 az=100.32<-6688 ze=41.58<-9228 Statuses=0009 0009 13:06:58 Msec=2250 True Az=100.32 Ze=41.58 Az status=0009 Ze status=0009 13:06:59 Check angles 13:06:59 SkyScan query 13:06:59 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:06:59 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:06:59 Check angles 13:06:59 SkyScan query 13:07:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:07:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:07:00 Message to Master queued w/err=0: serial=117419 error=0 13:07:05 Received message from Master: op=Filter serial=117420 13:07:05 Color wheel filter change from 0 to 0 13:07:05 FLIGetFilterPos err=0 currentPosition=0 13:07:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:05 Filter is already there-color wheel unchanged 13:07:05 Received message from Master: op=Shutter serial=117421 13:07:05 Shutter LASER close 13:07:05 Received message from Camera: op=State serial=117423 13:07:05 GetSingleValue result=40 Value=cccccccc 13:07:05 SkyScan query 13:07:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:07:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:06 Parameters OK 13:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:06 Set A/D data flow result=40 13:07:06 Set A/D channel type result=40 13:07:06 Set A/D encoding result=40 13:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:06 Set channel filter=0.000000e+000 result=40 13:07:06 Config A/D Result=40 13:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:06 Get A/D filter: -9.255963e+061 result=40 13:07:06 Get A/D value=-858993460 result=40 13:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:06 Parameters OK 13:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:06 Set A/D data flow result=40 13:07:06 Set A/D channel type result=40 13:07:06 Set A/D encoding result=40 13:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:06 Set channel filter=0.000000e+000 result=40 13:07:06 Config A/D Result=40 13:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:06 Get A/D filter: -9.255963e+061 result=40 13:07:06 Get A/D value=-858993460 result=40 13:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:06 Aux= 13:07:06 Message to Camera, serial 117423 queued 13:07:43 Received message from Master: op=PointingHead serial=117436 13:07:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:07:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:07:43 Point started: ret=0 13:07:43 point_skyscan result=0 13:07:44 Check angles 13:07:44 SkyScan query 13:07:44 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 13:07:44 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 13:07:44 Check angles 13:07:44 SkyScan query 13:07:45 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 13:07:45 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 13:07:45 Check angles 13:07:45 SkyScan query 13:07:46 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 13:07:46 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 13:07:46 Check angles 13:07:46 SkyScan query 13:07:47 SkyScan query done: ret=0 az=161.61<-10774 ze=38.505<-9433 Statuses=0009 0008 13:07:47 Msec=2250 True Az=161.61 Ze=38.505 Az status=0009 Ze status=0008 13:07:47 Check angles 13:07:47 SkyScan query 13:07:47 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:07:47 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:07:47 Check angles 13:07:47 SkyScan query 13:07:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:07:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:07:48 Message to Master queued w/err=0: serial=117436 error=0 13:07:53 Received message from Master: op=Filter serial=117437 13:07:53 Color wheel filter change from 0 to 0 13:07:53 FLIGetFilterPos err=0 currentPosition=0 13:07:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:53 Filter is already there-color wheel unchanged 13:07:53 Received message from Master: op=Shutter serial=117438 13:07:53 Shutter LASER close 13:07:53 Received message from Camera: op=State serial=117440 13:07:53 GetSingleValue result=40 Value=cccccccc 13:07:53 SkyScan query 13:07:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:07:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:54 Parameters OK 13:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:54 Set A/D data flow result=40 13:07:54 Set A/D channel type result=40 13:07:54 Set A/D encoding result=40 13:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:54 Set channel filter=0.000000e+000 result=40 13:07:54 Config A/D Result=40 13:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:54 Get A/D filter: -9.255963e+061 result=40 13:07:54 Get A/D value=-858993460 result=40 13:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:54 Parameters OK 13:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:54 Set A/D data flow result=40 13:07:54 Set A/D channel type result=40 13:07:54 Set A/D encoding result=40 13:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:54 Set channel filter=0.000000e+000 result=40 13:07:54 Config A/D Result=40 13:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:54 Get A/D filter: -9.255963e+061 result=40 13:07:54 Get A/D value=-858993460 result=40 13:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:54 Aux= 13:07:54 Message to Camera, serial 117440 queued 13:08:31 Received message from Master: op=PointingHead serial=117453 13:08:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:08:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:08:31 Point started: ret=0 13:08:31 point_skyscan result=0 13:08:32 Check angles 13:08:32 SkyScan query 13:08:32 SkyScan query done: ret=0 az=152.76<-10184 ze=8.325<-11445 Statuses=0009 0009 13:08:32 Msec=0 True Az=152.76 Ze=8.325 Az status=0009 Ze status=0009 13:08:32 Check angles 13:08:32 SkyScan query 13:08:33 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.585<-12839 Statuses=0009 0009 13:08:33 Msec=750 True Az=135.285 Ze=-12.585 Az status=0009 Ze status=0009 13:08:33 Check angles 13:08:33 SkyScan query 13:08:34 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.555<-14237 Statuses=0009 0009 13:08:34 Msec=1500 True Az=117.765 Ze=-33.555 Az status=0009 Ze status=0009 13:08:34 Check angles 13:08:34 SkyScan query 13:08:35 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.57<-15438 Statuses=0009 0009 13:08:35 Msec=2250 True Az=100.05 Ze=-51.57 Az status=0009 Ze status=0009 13:08:35 Check angles 13:08:35 SkyScan query 13:08:35 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:08:35 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:08:35 Check angles 13:08:35 SkyScan query 13:08:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:08:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:08:36 Message to Master queued w/err=0: serial=117453 error=0 13:08:41 Received message from Master: op=Filter serial=117454 13:08:41 Color wheel filter change from 0 to 0 13:08:41 FLIGetFilterPos err=0 currentPosition=0 13:08:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:41 Filter is already there-color wheel unchanged 13:08:41 Received message from Master: op=Shutter serial=117455 13:08:41 Shutter LASER close 13:08:41 Received message from Camera: op=State serial=117457 13:08:41 GetSingleValue result=40 Value=cccccccc 13:08:41 SkyScan query 13:08:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:08:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:42 Parameters OK 13:08:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:42 Set A/D data flow result=40 13:08:42 Set A/D channel type result=40 13:08:42 Set A/D encoding result=40 13:08:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:42 Set channel filter=0.000000e+000 result=40 13:08:42 Config A/D Result=40 13:08:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:42 Get A/D filter: -9.255963e+061 result=40 13:08:42 Get A/D value=-858993460 result=40 13:08:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:42 Parameters OK 13:08:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:42 Set A/D data flow result=40 13:08:42 Set A/D channel type result=40 13:08:42 Set A/D encoding result=40 13:08:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:42 Set channel filter=0.000000e+000 result=40 13:08:42 Config A/D Result=40 13:08:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:42 Get A/D filter: -9.255963e+061 result=40 13:08:42 Get A/D value=-858993460 result=40 13:08:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:42 Aux= 13:08:42 Message to Camera, serial 117457 queued 13:09:19 Received message from Master: op=PointingHead serial=117470 13:09:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:09:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:09:19 Point started: ret=0 13:09:19 point_skyscan result=0 13:09:20 Check angles 13:09:20 SkyScan query 13:09:20 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.45<-17430 Statuses=0009 0009 13:09:20 Msec=0 True Az=109.14 Ze=-81.45 Az status=0009 Ze status=0009 13:09:21 Check angles 13:09:21 SkyScan query 13:09:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 13:09:21 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 13:09:21 Check angles 13:09:21 SkyScan query 13:09:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 13:09:22 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 13:09:22 Check angles 13:09:22 SkyScan query 13:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.675<-21645 Statuses=0008 0009 13:09:23 Msec=2250 True Az=112.995 Ze=-144.675 Az status=0008 Ze status=0009 13:09:23 Check angles 13:09:23 SkyScan query 13:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 13:09:23 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 13:09:24 Check angles 13:09:24 SkyScan query 13:09:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:09:24 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:09:24 Message to Master queued w/err=0: serial=117470 error=0 13:09:29 Received message from Master: op=Filter serial=117471 13:09:29 Color wheel filter change from 0 to 0 13:09:29 FLIGetFilterPos err=0 currentPosition=0 13:09:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:29 Filter is already there-color wheel unchanged 13:09:29 Received message from Master: op=Shutter serial=117472 13:09:29 Shutter LASER open 13:09:29 Received message from Camera: op=State serial=117474 13:09:29 GetSingleValue result=40 Value=cccccccc 13:09:29 SkyScan query 13:09:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:09:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:30 Parameters OK 13:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:30 Set A/D data flow result=40 13:09:30 Set A/D channel type result=40 13:09:30 Set A/D encoding result=40 13:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:30 Set channel filter=0.000000e+000 result=40 13:09:30 Config A/D Result=40 13:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:30 Get A/D filter: -9.255963e+061 result=40 13:09:30 Get A/D value=-858993460 result=40 13:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:30 Parameters OK 13:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:30 Set A/D data flow result=40 13:09:30 Set A/D channel type result=40 13:09:30 Set A/D encoding result=40 13:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:30 Set channel filter=0.000000e+000 result=40 13:09:30 Config A/D Result=40 13:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:30 Get A/D filter: -9.255963e+061 result=40 13:09:30 Get A/D value=-858993460 result=40 13:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:30 Aux= 13:09:30 Message to Camera, serial 117474 queued 13:09:38 Received message from Master: op=Shutter serial=117484 13:09:39 Shutter LASER close 13:09:39 Received message from Master: op=PointingHead serial=117488 13:09:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:09:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:09:39 Point started: ret=0 13:09:39 point_skyscan result=0 13:09:40 Check angles 13:09:40 SkyScan query 13:09:41 SkyScan query done: ret=0 az=89.805<-5987 ze=157.245<-1517 Statuses=0009 0009 13:09:41 Msec=0 True Az=89.805 Ze=157.245 Az status=0009 Ze status=0009 13:09:41 Check angles 13:09:41 SkyScan query 13:09:41 SkyScan query done: ret=0 az=72.3<-4820 ze=136.155<-2923 Statuses=0009 0009 13:09:41 Msec=750 True Az=72.3 Ze=136.155 Az status=0009 Ze status=0009 13:09:42 Check angles 13:09:42 SkyScan query 13:09:42 SkyScan query done: ret=0 az=54.93<-3662 ze=115.35<-4310 Statuses=0009 0009 13:09:42 Msec=1500 True Az=54.93 Ze=115.35 Az status=0009 Ze status=0009 13:09:42 Check angles 13:09:42 SkyScan query 13:09:43 SkyScan query done: ret=0 az=40.95<-2730 ze=94.35<-5710 Statuses=0009 0009 13:09:43 Msec=2250 True Az=40.95 Ze=94.35 Az status=0009 Ze status=0009 13:09:43 Check angles 13:09:43 SkyScan query 13:09:44 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 13:09:44 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 13:09:44 Check angles 13:09:44 SkyScan query 13:09:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 13:09:44 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 13:09:45 Check angles 13:09:45 SkyScan query 13:09:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:09:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:09:45 Message to Master queued w/err=0: serial=117488 error=0 13:09:50 Received message from Master: op=Filter serial=117489 13:09:50 Color wheel filter change from 0 to 0 13:09:50 FLIGetFilterPos err=0 currentPosition=0 13:09:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:50 Filter is already there-color wheel unchanged 13:09:50 Received message from Master: op=Shutter serial=117490 13:09:50 Shutter LASER close 13:09:50 Received message from Camera: op=State serial=117492 13:09:50 GetSingleValue result=40 Value=cccccccc 13:09:50 SkyScan query 13:09:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:09:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:51 Parameters OK 13:09:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:51 Set A/D data flow result=40 13:09:51 Set A/D channel type result=40 13:09:51 Set A/D encoding result=40 13:09:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:51 Set channel filter=0.000000e+000 result=40 13:09:51 Config A/D Result=40 13:09:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:51 Get A/D filter: -9.255963e+061 result=40 13:09:51 Get A/D value=-858993460 result=40 13:09:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:51 Parameters OK 13:09:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:51 Set A/D data flow result=40 13:09:51 Set A/D channel type result=40 13:09:51 Set A/D encoding result=40 13:09:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:51 Set channel filter=0.000000e+000 result=40 13:09:51 Config A/D Result=40 13:09:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:51 Get A/D filter: -9.255963e+061 result=40 13:09:51 Get A/D value=-858993460 result=40 13:09:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:51 Aux= 13:09:51 Message to Camera, serial 117492 queued 13:10:28 Received message from Master: op=PointingHead serial=117505 13:10:28 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:10:28 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:10:28 Point started: ret=0 13:10:28 point_skyscan result=0 13:10:29 Check angles 13:10:29 SkyScan query 13:10:30 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 13:10:30 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 13:10:30 Check angles 13:10:30 SkyScan query 13:10:30 SkyScan query done: ret=0 az=81.705<-5447 ze=66.495<-7567 Statuses=0009 0008 13:10:30 Msec=750 True Az=81.705 Ze=66.495 Az status=0009 Ze status=0008 13:10:31 Check angles 13:10:31 SkyScan query 13:10:31 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 13:10:31 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 13:10:31 Check angles 13:10:31 SkyScan query 13:10:32 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 13:10:32 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 13:10:32 Check angles 13:10:32 SkyScan query 13:10:33 SkyScan query done: ret=0 az=134.49<-8966 ze=66.495<-7567 Statuses=0009 0008 13:10:33 Msec=3000 True Az=134.49 Ze=66.495 Az status=0009 Ze status=0008 13:10:33 Check angles 13:10:33 SkyScan query 13:10:33 SkyScan query done: ret=0 az=151.875<-10125 ze=66.495<-7567 Statuses=0009 0008 13:10:33 Msec=3750 True Az=151.875 Ze=66.495 Az status=0009 Ze status=0008 13:10:34 Check angles 13:10:34 SkyScan query 13:10:34 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:10:34 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:10:34 Message to Master queued w/err=0: serial=117505 error=0 13:10:39 Received message from Master: op=Filter serial=117506 13:10:39 Color wheel filter change from 0 to 0 13:10:39 FLIGetFilterPos err=0 currentPosition=0 13:10:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:39 Filter is already there-color wheel unchanged 13:10:39 Received message from Master: op=Shutter serial=117507 13:10:39 Shutter LASER close 13:10:39 Received message from Camera: op=State serial=117509 13:10:39 GetSingleValue result=40 Value=cccccccc 13:10:39 SkyScan query 13:10:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:10:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:40 Parameters OK 13:10:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:40 Set A/D data flow result=40 13:10:40 Set A/D channel type result=40 13:10:40 Set A/D encoding result=40 13:10:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:40 Set channel filter=0.000000e+000 result=40 13:10:40 Config A/D Result=40 13:10:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:40 Get A/D filter: -9.255963e+061 result=40 13:10:40 Get A/D value=-858993460 result=40 13:10:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:40 Parameters OK 13:10:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:40 Set A/D data flow result=40 13:10:40 Set A/D channel type result=40 13:10:40 Set A/D encoding result=40 13:10:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:40 Set channel filter=0.000000e+000 result=40 13:10:40 Config A/D Result=40 13:10:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:40 Get A/D filter: -9.255963e+061 result=40 13:10:40 Get A/D value=-858993460 result=40 13:10:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:40 Aux= 13:10:40 Message to Camera, serial 117509 queued 13:11:17 Received message from Master: op=PointingHead serial=117522 13:11:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:11:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:11:17 Point started: ret=0 13:11:17 point_skyscan result=0 13:11:18 Check angles 13:11:18 SkyScan query 13:11:18 SkyScan query done: ret=0 az=135.045<-9003 ze=36.78<-9548 Statuses=0009 0009 13:11:18 Msec=0 True Az=135.045 Ze=36.78 Az status=0009 Ze status=0009 13:11:19 Check angles 13:11:19 SkyScan query 13:11:19 SkyScan query done: ret=0 az=117.555<-7837 ze=15.81<-10946 Statuses=0009 0009 13:11:19 Msec=750 True Az=117.555 Ze=15.81 Az status=0009 Ze status=0009 13:11:19 Check angles 13:11:19 SkyScan query 13:11:20 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.535<-12369 Statuses=0009 0009 13:11:20 Msec=1500 True Az=99.825 Ze=-5.535 Az status=0009 Ze status=0009 13:11:20 Check angles 13:11:20 SkyScan query 13:11:21 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.475<-13765 Statuses=0009 0009 13:11:21 Msec=2250 True Az=82.365 Ze=-26.475 Az status=0009 Ze status=0009 13:11:21 Check angles 13:11:21 SkyScan query 13:11:22 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.565<-14571 Statuses=0009 0008 13:11:22 Msec=3000 True Az=64.8 Ze=-38.565 Az status=0009 Ze status=0008 13:11:22 Check angles 13:11:22 SkyScan query 13:11:22 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.535<-14569 Statuses=0009 0008 13:11:22 Msec=3750 True Az=47.34 Ze=-38.535 Az status=0009 Ze status=0008 13:11:22 Check angles 13:11:22 SkyScan query 13:11:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:11:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:11:23 Message to Master queued w/err=0: serial=117522 error=0 13:11:28 Received message from Master: op=Filter serial=117523 13:11:28 Color wheel filter change from 0 to 0 13:11:28 FLIGetFilterPos err=0 currentPosition=0 13:11:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:28 Filter is already there-color wheel unchanged 13:11:28 Received message from Master: op=Shutter serial=117524 13:11:28 Shutter LASER close 13:11:28 Received message from Camera: op=State serial=117526 13:11:28 GetSingleValue result=40 Value=cccccccc 13:11:28 SkyScan query 13:11:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:11:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:29 Parameters OK 13:11:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:29 Set A/D data flow result=40 13:11:29 Set A/D channel type result=40 13:11:29 Set A/D encoding result=40 13:11:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:29 Set channel filter=0.000000e+000 result=40 13:11:29 Config A/D Result=40 13:11:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:29 Get A/D filter: -9.255963e+061 result=40 13:11:29 Get A/D value=-858993460 result=40 13:11:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:29 Parameters OK 13:11:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:29 Set A/D data flow result=40 13:11:29 Set A/D channel type result=40 13:11:29 Set A/D encoding result=40 13:11:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:29 Set channel filter=0.000000e+000 result=40 13:11:29 Config A/D Result=40 13:11:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:29 Get A/D filter: -9.255963e+061 result=40 13:11:29 Get A/D value=-858993460 result=40 13:11:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:29 Aux= 13:11:29 Message to Camera, serial 117526 queued 13:12:06 Received message from Master: op=PointingHead serial=117539 13:12:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:12:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:12:06 Point started: ret=0 13:12:06 point_skyscan result=0 13:12:07 Check angles 13:12:07 SkyScan query 13:12:07 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.52<-16568 Statuses=0009 0009 13:12:07 Msec=0 True Az=64.215 Ze=-68.52 Az status=0009 Ze status=0009 13:12:07 Check angles 13:12:07 SkyScan query 13:12:08 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.49<-17966 Statuses=0009 0009 13:12:08 Msec=750 True Az=81.66 Ze=-89.49 Az status=0009 Ze status=0009 13:12:08 Check angles 13:12:08 SkyScan query 13:12:09 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.46<-19364 Statuses=0009 0009 13:12:09 Msec=1500 True Az=99.12 Ze=-110.46 Az status=0009 Ze status=0009 13:12:09 Check angles 13:12:09 SkyScan query 13:12:10 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.385<-20759 Statuses=0009 0009 13:12:10 Msec=2250 True Az=116.64 Ze=-131.385 Az status=0009 Ze status=0009 13:12:10 Check angles 13:12:10 SkyScan query 13:12:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 13:12:10 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 13:12:10 Check angles 13:12:10 SkyScan query 13:12:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:12:11 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:12:11 Message to Master queued w/err=0: serial=117539 error=0 13:12:16 Received message from Master: op=Filter serial=117540 13:12:16 Color wheel filter change from 0 to 0 13:12:16 FLIGetFilterPos err=0 currentPosition=0 13:12:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:16 Filter is already there-color wheel unchanged 13:12:16 Received message from Master: op=Shutter serial=117541 13:12:16 Shutter LASER close 13:12:16 Received message from Camera: op=State serial=117543 13:12:16 GetSingleValue result=40 Value=cccccccc 13:12:16 SkyScan query 13:12:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:12:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:17 Parameters OK 13:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:17 Set A/D data flow result=40 13:12:17 Set A/D channel type result=40 13:12:17 Set A/D encoding result=40 13:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:17 Set channel filter=0.000000e+000 result=40 13:12:17 Config A/D Result=40 13:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:17 Get A/D filter: -9.255963e+061 result=40 13:12:17 Get A/D value=-858993460 result=40 13:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:17 Parameters OK 13:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:17 Set A/D data flow result=40 13:12:17 Set A/D channel type result=40 13:12:17 Set A/D encoding result=40 13:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:17 Set channel filter=0.000000e+000 result=40 13:12:17 Config A/D Result=40 13:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:17 Get A/D filter: -9.255963e+061 result=40 13:12:17 Get A/D value=-858993460 result=40 13:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:17 Aux= 13:12:17 Message to Camera, serial 117543 queued 13:12:54 Received message from Master: op=PointingHead serial=117556 13:12:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:12:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:12:54 Point started: ret=0 13:12:54 point_skyscan result=0 13:12:55 Check angles 13:12:55 SkyScan query 13:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0009 0009 13:12:55 Msec=0 True Az=112.995 Ze=-171.435 Az status=0009 Ze status=0009 13:12:56 Check angles 13:12:56 SkyScan query 13:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:12:56 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:12:56 Message to Master queued w/err=0: serial=117556 error=0 13:13:01 Received message from Master: op=Filter serial=117557 13:13:01 Color wheel filter change from 0 to 0 13:13:01 FLIGetFilterPos err=0 currentPosition=0 13:13:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:01 Filter is already there-color wheel unchanged 13:13:01 Received message from Master: op=Shutter serial=117558 13:13:01 Shutter LASER open 13:13:01 Received message from Camera: op=State serial=117560 13:13:01 GetSingleValue result=40 Value=cccccccc 13:13:01 SkyScan query 13:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:13:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:02 Parameters OK 13:13:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:02 Set A/D data flow result=40 13:13:02 Set A/D channel type result=40 13:13:02 Set A/D encoding result=40 13:13:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:02 Set channel filter=0.000000e+000 result=40 13:13:02 Config A/D Result=40 13:13:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:02 Get A/D filter: -9.255963e+061 result=40 13:13:02 Get A/D value=-858993460 result=40 13:13:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:02 Parameters OK 13:13:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:02 Set A/D data flow result=40 13:13:02 Set A/D channel type result=40 13:13:02 Set A/D encoding result=40 13:13:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:02 Set channel filter=0.000000e+000 result=40 13:13:02 Config A/D Result=40 13:13:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:02 Get A/D filter: -9.255963e+061 result=40 13:13:02 Get A/D value=-858993460 result=40 13:13:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:02 Aux= 13:13:02 Message to Camera, serial 117560 queued 13:13:10 Received message from Master: op=Shutter serial=117570 13:13:10 Shutter LASER close 13:13:11 Received message from Master: op=PointingHead serial=117574 13:13:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:13:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:13:11 Point started: ret=0 13:13:11 point_skyscan result=0 13:13:12 Check angles 13:13:12 SkyScan query 13:13:13 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.1<-21540 Statuses=0009 0009 13:13:13 Msec=0 True Az=136.185 Ze=-143.1 Az status=0009 Ze status=0009 13:13:13 Check angles 13:13:13 SkyScan query 13:13:13 SkyScan query done: ret=0 az=154.065<-10271 ze=-121.71<-20114 Statuses=0009 0009 13:13:13 Msec=750 True Az=154.065 Ze=-121.71 Az status=0009 Ze status=0009 13:13:14 Check angles 13:13:14 SkyScan query 13:13:14 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.74<-18716 Statuses=0009 0009 13:13:14 Msec=1500 True Az=171.525 Ze=-100.74 Az status=0009 Ze status=0009 13:13:14 Check angles 13:13:14 SkyScan query 13:13:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 13:13:15 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 13:13:15 Check angles 13:13:15 SkyScan query 13:13:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.83<-15922 Statuses=0008 0009 13:13:16 Msec=3000 True Az=176.01 Ze=-58.83 Az status=0008 Ze status=0009 13:13:16 Check angles 13:13:16 SkyScan query 13:13:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:13:16 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:13:16 Message to Master queued w/err=0: serial=117574 error=0 13:13:21 Received message from Master: op=Filter serial=117575 13:13:21 Color wheel filter change from 0 to 0 13:13:21 FLIGetFilterPos err=0 currentPosition=0 13:13:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:21 Filter is already there-color wheel unchanged 13:13:22 Received message from Master: op=Shutter serial=117576 13:13:22 Shutter LASER close 13:13:22 Received message from Camera: op=State serial=117578 13:13:22 GetSingleValue result=40 Value=cccccccc 13:13:22 SkyScan query 13:13:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:13:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:22 Parameters OK 13:13:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:22 Set A/D data flow result=40 13:13:22 Set A/D channel type result=40 13:13:22 Set A/D encoding result=40 13:13:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:22 Set channel filter=0.000000e+000 result=40 13:13:22 Config A/D Result=40 13:13:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:22 Get A/D filter: -9.255963e+061 result=40 13:13:22 Get A/D value=-858993460 result=40 13:13:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:22 Parameters OK 13:13:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:22 Set A/D data flow result=40 13:13:22 Set A/D channel type result=40 13:13:22 Set A/D encoding result=40 13:13:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:22 Set channel filter=0.000000e+000 result=40 13:13:22 Config A/D Result=40 13:13:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:22 Get A/D filter: -9.255963e+061 result=40 13:13:22 Get A/D value=-858993460 result=40 13:13:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:22 Aux= 13:13:22 Message to Camera, serial 117578 queued 13:13:59 Received message from Master: op=PointingHead serial=117591 13:13:59 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:13:59 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:14:00 Point started: ret=0 13:14:00 point_skyscan result=0 13:14:00 Check angles 13:14:00 SkyScan query 13:14:01 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.915<-13461 Statuses=0009 0009 13:14:01 Msec=0 True Az=153.105 Ze=-21.915 Az status=0009 Ze status=0009 13:14:01 Check angles 13:14:01 SkyScan query 13:14:02 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.48<-12032 Statuses=0009 0009 13:14:02 Msec=750 True Az=135.255 Ze=-0.48 Az status=0009 Ze status=0009 13:14:02 Check angles 13:14:02 SkyScan query 13:14:02 SkyScan query done: ret=0 az=117.75<-7850 ze=20.46<-10636 Statuses=0009 0009 13:14:02 Msec=1500 True Az=117.75 Ze=20.46 Az status=0009 Ze status=0009 13:14:03 Check angles 13:14:03 SkyScan query 13:14:03 SkyScan query done: ret=0 az=100.365<-6691 ze=41.445<-9237 Statuses=0009 0009 13:14:03 Msec=2250 True Az=100.365 Ze=41.445 Az status=0009 Ze status=0009 13:14:03 Check angles 13:14:03 SkyScan query 13:14:04 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 13:14:04 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 13:14:04 Check angles 13:14:04 SkyScan query 13:14:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:14:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:14:05 Message to Master queued w/err=0: serial=117591 error=0 13:14:10 Received message from Master: op=Filter serial=117592 13:14:10 Color wheel filter change from 0 to 0 13:14:10 FLIGetFilterPos err=0 currentPosition=0 13:14:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:10 Filter is already there-color wheel unchanged 13:14:10 Received message from Master: op=Shutter serial=117593 13:14:10 Shutter LASER close 13:14:10 Received message from Camera: op=State serial=117595 13:14:10 GetSingleValue result=40 Value=cccccccc 13:14:10 SkyScan query 13:14:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:14:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:10 Parameters OK 13:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:10 Set A/D data flow result=40 13:14:10 Set A/D channel type result=40 13:14:10 Set A/D encoding result=40 13:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:10 Set channel filter=0.000000e+000 result=40 13:14:10 Config A/D Result=40 13:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:10 Get A/D filter: -9.255963e+061 result=40 13:14:10 Get A/D value=-858993460 result=40 13:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:10 Parameters OK 13:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:10 Set A/D data flow result=40 13:14:10 Set A/D channel type result=40 13:14:10 Set A/D encoding result=40 13:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:10 Set channel filter=0.000000e+000 result=40 13:14:10 Config A/D Result=40 13:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:10 Get A/D filter: -9.255963e+061 result=40 13:14:10 Get A/D value=-858993460 result=40 13:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:10 Aux= 13:14:10 Message to Camera, serial 117595 queued 13:14:47 Received message from Master: op=PointingHead serial=117608 13:14:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:14:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:14:48 Point started: ret=0 13:14:48 point_skyscan result=0 13:14:48 Check angles 13:14:48 SkyScan query 13:14:49 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 13:14:49 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 13:14:49 Check angles 13:14:49 SkyScan query 13:14:50 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 13:14:50 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 13:14:50 Check angles 13:14:50 SkyScan query 13:14:50 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 13:14:50 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 13:14:51 Check angles 13:14:51 SkyScan query 13:14:51 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 13:14:51 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 13:14:51 Check angles 13:14:51 SkyScan query 13:14:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:14:52 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:14:52 Check angles 13:14:52 SkyScan query 13:14:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:14:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:14:53 Message to Master queued w/err=0: serial=117608 error=0 13:14:58 Received message from Master: op=Filter serial=117609 13:14:58 Color wheel filter change from 0 to 0 13:14:58 FLIGetFilterPos err=0 currentPosition=0 13:14:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:58 Filter is already there-color wheel unchanged 13:14:58 Received message from Master: op=Shutter serial=117610 13:14:58 Shutter LASER close 13:14:58 Received message from Camera: op=State serial=117612 13:14:58 GetSingleValue result=40 Value=cccccccc 13:14:58 SkyScan query 13:14:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:14:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:59 Parameters OK 13:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:59 Set A/D data flow result=40 13:14:59 Set A/D channel type result=40 13:14:59 Set A/D encoding result=40 13:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:59 Set channel filter=0.000000e+000 result=40 13:14:59 Config A/D Result=40 13:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:59 Get A/D filter: -9.255963e+061 result=40 13:14:59 Get A/D value=-858993460 result=40 13:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:59 Parameters OK 13:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:59 Set A/D data flow result=40 13:14:59 Set A/D channel type result=40 13:14:59 Set A/D encoding result=40 13:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:59 Set channel filter=0.000000e+000 result=40 13:14:59 Config A/D Result=40 13:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:59 Get A/D filter: -9.255963e+061 result=40 13:14:59 Get A/D value=-858993460 result=40 13:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:59 Aux= 13:14:59 Message to Camera, serial 117612 queued 13:15:27 Received message from Master: op=Identify serial=117613 13:15:34 Received message from Master: op=PointingHead serial=117627 13:15:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:15:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:15:35 Point started: ret=0 13:15:35 point_skyscan result=0 13:15:36 Check angles 13:15:36 SkyScan query 13:15:36 SkyScan query done: ret=0 az=152.985<-10199 ze=8.64<-11424 Statuses=0009 0009 13:15:36 Msec=0 True Az=152.985 Ze=8.64 Az status=0009 Ze status=0009 13:15:36 Check angles 13:15:36 SkyScan query 13:15:37 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.3<-12820 Statuses=0009 0009 13:15:37 Msec=750 True Az=135.435 Ze=-12.3 Az status=0009 Ze status=0009 13:15:37 Check angles 13:15:37 SkyScan query 13:15:38 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.705<-14247 Statuses=0009 0009 13:15:38 Msec=1500 True Az=117.6 Ze=-33.705 Az status=0009 Ze status=0009 13:15:38 Check angles 13:15:38 SkyScan query 13:15:38 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 13:15:38 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 13:15:39 Check angles 13:15:39 SkyScan query 13:15:39 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:15:39 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:15:39 Check angles 13:15:39 SkyScan query 13:15:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:15:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:15:40 Message to Master queued w/err=0: serial=117627 error=0 13:15:45 Received message from Master: op=Filter serial=117628 13:15:45 Color wheel filter change from 0 to 0 13:15:45 FLIGetFilterPos err=0 currentPosition=0 13:15:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:45 Filter is already there-color wheel unchanged 13:15:45 Received message from Master: op=Shutter serial=117629 13:15:45 Shutter LASER close 13:15:45 Received message from Camera: op=State serial=117631 13:15:45 GetSingleValue result=40 Value=cccccccc 13:15:45 SkyScan query 13:15:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:15:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:46 Parameters OK 13:15:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:46 Set A/D data flow result=40 13:15:46 Set A/D channel type result=40 13:15:46 Set A/D encoding result=40 13:15:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:46 Set channel filter=0.000000e+000 result=40 13:15:46 Config A/D Result=40 13:15:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:46 Get A/D filter: -9.255963e+061 result=40 13:15:46 Get A/D value=-858993460 result=40 13:15:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:46 Parameters OK 13:15:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:46 Set A/D data flow result=40 13:15:46 Set A/D channel type result=40 13:15:46 Set A/D encoding result=40 13:15:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:46 Set channel filter=0.000000e+000 result=40 13:15:46 Config A/D Result=40 13:15:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:46 Get A/D filter: -9.255963e+061 result=40 13:15:46 Get A/D value=-858993460 result=40 13:15:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:46 Aux= 13:15:46 Message to Camera, serial 117631 queued [UTC 2018-12-13 13:15:52] 13:16:23 Received message from Master: op=PointingHead serial=117644 13:16:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:16:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:16:23 Point started: ret=0 13:16:23 point_skyscan result=0 13:16:24 Check angles 13:16:24 SkyScan query 13:16:24 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.63<-17442 Statuses=0009 0009 13:16:24 Msec=0 True Az=109.2 Ze=-81.63 Az status=0009 Ze status=0009 13:16:24 Check angles 13:16:24 SkyScan query 13:16:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 13:16:25 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 13:16:25 Check angles 13:16:25 SkyScan query 13:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.54<-20236 Statuses=0008 0009 13:16:26 Msec=1500 True Az=112.995 Ze=-123.54 Az status=0008 Ze status=0009 13:16:26 Check angles 13:16:26 SkyScan query 13:16:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 13:16:27 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 13:16:27 Check angles 13:16:27 SkyScan query 13:16:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.435<-23029 Statuses=0008 0009 13:16:27 Msec=3000 True Az=112.995 Ze=-165.435 Az status=0008 Ze status=0009 13:16:27 Check angles 13:16:27 SkyScan query 13:16:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:16:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:16:28 Message to Master queued w/err=0: serial=117644 error=0 13:16:33 Received message from Master: op=Filter serial=117645 13:16:33 Color wheel filter change from 0 to 0 13:16:33 FLIGetFilterPos err=0 currentPosition=0 13:16:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:33 Filter is already there-color wheel unchanged 13:16:33 Received message from Master: op=Shutter serial=117646 13:16:33 Shutter LASER open 13:16:33 Received message from Camera: op=State serial=117648 13:16:33 GetSingleValue result=40 Value=cccccccc 13:16:33 SkyScan query 13:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:16:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:34 Parameters OK 13:16:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:34 Set A/D data flow result=40 13:16:34 Set A/D channel type result=40 13:16:34 Set A/D encoding result=40 13:16:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:34 Set channel filter=0.000000e+000 result=40 13:16:34 Config A/D Result=40 13:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:34 Get A/D filter: -9.255963e+061 result=40 13:16:34 Get A/D value=-858993460 result=40 13:16:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:34 Parameters OK 13:16:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:34 Set A/D data flow result=40 13:16:34 Set A/D channel type result=40 13:16:34 Set A/D encoding result=40 13:16:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:34 Set channel filter=0.000000e+000 result=40 13:16:34 Config A/D Result=40 13:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:34 Get A/D filter: -9.255963e+061 result=40 13:16:34 Get A/D value=-858993460 result=40 13:16:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:34 Aux= 13:16:34 Message to Camera, serial 117648 queued 13:16:42 Received message from Master: op=Shutter serial=117658 13:16:42 Shutter LASER close 13:16:43 Received message from Master: op=PointingHead serial=117662 13:16:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:16:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:16:43 Point started: ret=0 13:16:43 point_skyscan result=0 13:16:44 Check angles 13:16:44 SkyScan query 13:16:44 SkyScan query done: ret=0 az=89.505<-5967 ze=156.735<-1551 Statuses=0009 0009 13:16:44 Msec=0 True Az=89.505 Ze=156.735 Az status=0009 Ze status=0009 13:16:45 Check angles 13:16:45 SkyScan query 13:16:45 SkyScan query done: ret=0 az=71.97<-4798 ze=135.78<-2948 Statuses=0009 0009 13:16:45 Msec=750 True Az=71.97 Ze=135.78 Az status=0009 Ze status=0009 13:16:45 Check angles 13:16:45 SkyScan query 13:16:46 SkyScan query done: ret=0 az=54.66<-3644 ze=114.795<-4347 Statuses=0009 0009 13:16:46 Msec=1500 True Az=54.66 Ze=114.795 Az status=0009 Ze status=0009 13:16:46 Check angles 13:16:46 SkyScan query 13:16:47 SkyScan query done: ret=0 az=40.98<-2732 ze=93.42<-5772 Statuses=0009 0009 13:16:47 Msec=2250 True Az=40.98 Ze=93.42 Az status=0009 Ze status=0009 13:16:47 Check angles 13:16:47 SkyScan query 13:16:48 SkyScan query done: ret=0 az=40.995<-2733 ze=72.45<-7170 Statuses=0008 0009 13:16:48 Msec=3000 True Az=40.995 Ze=72.45 Az status=0008 Ze status=0009 13:16:48 Check angles 13:16:48 SkyScan query 13:16:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 13:16:48 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 13:16:48 Check angles 13:16:48 SkyScan query 13:16:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:16:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:16:49 Message to Master queued w/err=0: serial=117662 error=0 13:16:54 Received message from Master: op=Filter serial=117663 13:16:54 Color wheel filter change from 0 to 0 13:16:54 FLIGetFilterPos err=0 currentPosition=0 13:16:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:54 Filter is already there-color wheel unchanged 13:16:54 Received message from Master: op=Shutter serial=117664 13:16:54 Shutter LASER close 13:16:54 Received message from Camera: op=State serial=117666 13:16:54 GetSingleValue result=40 Value=cccccccc 13:16:54 SkyScan query 13:16:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:16:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:55 Parameters OK 13:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:55 Set A/D data flow result=40 13:16:55 Set A/D channel type result=40 13:16:55 Set A/D encoding result=40 13:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:55 Set channel filter=0.000000e+000 result=40 13:16:55 Config A/D Result=40 13:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:55 Get A/D filter: -9.255963e+061 result=40 13:16:55 Get A/D value=-858993460 result=40 13:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:55 Parameters OK 13:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:55 Set A/D data flow result=40 13:16:55 Set A/D channel type result=40 13:16:55 Set A/D encoding result=40 13:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:55 Set channel filter=0.000000e+000 result=40 13:16:55 Config A/D Result=40 13:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:55 Get A/D filter: -9.255963e+061 result=40 13:16:55 Get A/D value=-858993460 result=40 13:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:55 Aux= 13:16:55 Message to Camera, serial 117666 queued 13:17:32 Received message from Master: op=PointingHead serial=117679 13:17:32 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:17:32 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:17:32 Point started: ret=0 13:17:32 point_skyscan result=0 13:17:33 Check angles 13:17:33 SkyScan query 13:17:33 SkyScan query done: ret=0 az=64.05<-4270 ze=66.555<-7563 Statuses=0009 0008 13:17:33 Msec=0 True Az=64.05 Ze=66.555 Az status=0009 Ze status=0008 13:17:34 Check angles 13:17:34 SkyScan query 13:17:34 SkyScan query done: ret=0 az=81.585<-5439 ze=66.495<-7567 Statuses=0009 0008 13:17:34 Msec=750 True Az=81.585 Ze=66.495 Az status=0009 Ze status=0008 13:17:34 Check angles 13:17:34 SkyScan query 13:17:35 SkyScan query done: ret=0 az=98.985<-6599 ze=66.495<-7567 Statuses=0009 0008 13:17:35 Msec=1500 True Az=98.985 Ze=66.495 Az status=0009 Ze status=0008 13:17:35 Check angles 13:17:35 SkyScan query 13:17:36 SkyScan query done: ret=0 az=116.565<-7771 ze=66.495<-7567 Statuses=0009 0008 13:17:36 Msec=2250 True Az=116.565 Ze=66.495 Az status=0009 Ze status=0008 13:17:36 Check angles 13:17:36 SkyScan query 13:17:36 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 13:17:36 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 13:17:37 Check angles 13:17:37 SkyScan query 13:17:37 SkyScan query done: ret=0 az=151.68<-10112 ze=66.495<-7567 Statuses=0009 0008 13:17:37 Msec=3750 True Az=151.68 Ze=66.495 Az status=0009 Ze status=0008 13:17:37 Check angles 13:17:37 SkyScan query 13:17:38 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:17:38 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:17:38 Message to Master queued w/err=0: serial=117679 error=0 13:17:43 Received message from Master: op=Filter serial=117680 13:17:43 Color wheel filter change from 0 to 0 13:17:43 FLIGetFilterPos err=0 currentPosition=0 13:17:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:43 Filter is already there-color wheel unchanged 13:17:43 Received message from Master: op=Shutter serial=117681 13:17:43 Shutter LASER close 13:17:43 Received message from Camera: op=State serial=117683 13:17:43 GetSingleValue result=40 Value=cccccccc 13:17:43 SkyScan query 13:17:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:17:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:44 Parameters OK 13:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:44 Set A/D data flow result=40 13:17:44 Set A/D channel type result=40 13:17:44 Set A/D encoding result=40 13:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:44 Set channel filter=0.000000e+000 result=40 13:17:44 Config A/D Result=40 13:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:44 Get A/D filter: -9.255963e+061 result=40 13:17:44 Get A/D value=-858993460 result=40 13:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:44 Parameters OK 13:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:44 Set A/D data flow result=40 13:17:44 Set A/D channel type result=40 13:17:44 Set A/D encoding result=40 13:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:44 Set channel filter=0.000000e+000 result=40 13:17:44 Config A/D Result=40 13:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:44 Get A/D filter: -9.255963e+061 result=40 13:17:44 Get A/D value=-858993460 result=40 13:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:44 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:44 Aux= 13:17:44 Message to Camera, serial 117683 queued 13:18:21 Received message from Master: op=PointingHead serial=117696 13:18:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:18:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:18:21 Point started: ret=0 13:18:21 point_skyscan result=0 13:18:22 Check angles 13:18:22 SkyScan query 13:18:22 SkyScan query done: ret=0 az=135.12<-9008 ze=36.84<-9544 Statuses=0009 0009 13:18:22 Msec=0 True Az=135.12 Ze=36.84 Az status=0009 Ze status=0009 13:18:22 Check angles 13:18:22 SkyScan query 13:18:23 SkyScan query done: ret=0 az=117.255<-7817 ze=15.48<-10968 Statuses=0009 0009 13:18:23 Msec=750 True Az=117.255 Ze=15.48 Az status=0009 Ze status=0009 13:18:23 Check angles 13:18:23 SkyScan query 13:18:24 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.505<-12367 Statuses=0009 0009 13:18:24 Msec=1500 True Az=99.87 Ze=-5.505 Az status=0009 Ze status=0009 13:18:24 Check angles 13:18:24 SkyScan query 13:18:25 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.445<-13763 Statuses=0009 0009 13:18:25 Msec=2250 True Az=82.41 Ze=-26.445 Az status=0009 Ze status=0009 13:18:25 Check angles 13:18:25 SkyScan query 13:18:25 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.565<-14571 Statuses=0009 0008 13:18:25 Msec=3000 True Az=64.875 Ze=-38.565 Az status=0009 Ze status=0008 13:18:25 Check angles 13:18:25 SkyScan query 13:18:26 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.535<-14569 Statuses=0009 0008 13:18:26 Msec=3750 True Az=47.415 Ze=-38.535 Az status=0009 Ze status=0008 13:18:26 Check angles 13:18:26 SkyScan query 13:18:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:18:27 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:18:27 Message to Master queued w/err=0: serial=117696 error=0 13:18:32 Received message from Master: op=Filter serial=117697 13:18:32 Color wheel filter change from 0 to 0 13:18:32 FLIGetFilterPos err=0 currentPosition=0 13:18:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:32 Filter is already there-color wheel unchanged 13:18:32 Received message from Master: op=Shutter serial=117698 13:18:32 Shutter LASER close 13:18:32 Received message from Camera: op=State serial=117700 13:18:32 GetSingleValue result=40 Value=cccccccc 13:18:32 SkyScan query 13:18:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:18:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:33 Parameters OK 13:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:33 Set A/D data flow result=40 13:18:33 Set A/D channel type result=40 13:18:33 Set A/D encoding result=40 13:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:33 Set channel filter=0.000000e+000 result=40 13:18:33 Config A/D Result=40 13:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:33 Get A/D filter: -9.255963e+061 result=40 13:18:33 Get A/D value=-858993460 result=40 13:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:33 Parameters OK 13:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:33 Set A/D data flow result=40 13:18:33 Set A/D channel type result=40 13:18:33 Set A/D encoding result=40 13:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:33 Set channel filter=0.000000e+000 result=40 13:18:33 Config A/D Result=40 13:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:33 Get A/D filter: -9.255963e+061 result=40 13:18:33 Get A/D value=-858993460 result=40 13:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:33 Aux= 13:18:33 Message to Camera, serial 117700 queued 13:19:09 Received message from Master: op=PointingHead serial=117713 13:19:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:19:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:19:10 Point started: ret=0 13:19:10 point_skyscan result=0 13:19:10 Check angles 13:19:10 SkyScan query 13:19:11 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.34<-16556 Statuses=0009 0009 13:19:11 Msec=0 True Az=64.065 Ze=-68.34 Az status=0009 Ze status=0009 13:19:11 Check angles 13:19:11 SkyScan query 13:19:12 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.34<-17956 Statuses=0009 0009 13:19:12 Msec=750 True Az=81.57 Ze=-89.34 Az status=0009 Ze status=0009 13:19:12 Check angles 13:19:12 SkyScan query 13:19:13 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.28<-19352 Statuses=0009 0009 13:19:13 Msec=1500 True Az=98.985 Ze=-110.28 Az status=0009 Ze status=0009 13:19:13 Check angles 13:19:13 SkyScan query 13:19:13 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.655<-20777 Statuses=0009 0009 13:19:13 Msec=2250 True Az=116.805 Ze=-131.655 Az status=0009 Ze status=0009 13:19:13 Check angles 13:19:13 SkyScan query 13:19:14 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 13:19:14 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 13:19:14 Check angles 13:19:14 SkyScan query 13:19:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:19:15 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:19:15 Message to Master queued w/err=0: serial=117713 error=0 13:19:20 Received message from Master: op=Filter serial=117714 13:19:20 Color wheel filter change from 0 to 0 13:19:20 FLIGetFilterPos err=0 currentPosition=0 13:19:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:20 Filter is already there-color wheel unchanged 13:19:20 Received message from Master: op=Shutter serial=117715 13:19:20 Shutter LASER close 13:19:20 Received message from Camera: op=State serial=117717 13:19:20 GetSingleValue result=40 Value=cccccccc 13:19:20 SkyScan query 13:19:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:19:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:21 Parameters OK 13:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:21 Set A/D data flow result=40 13:19:21 Set A/D channel type result=40 13:19:21 Set A/D encoding result=40 13:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:21 Set channel filter=0.000000e+000 result=40 13:19:21 Config A/D Result=40 13:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:21 Get A/D filter: -9.255963e+061 result=40 13:19:21 Get A/D value=-858993460 result=40 13:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:21 Parameters OK 13:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:21 Set A/D data flow result=40 13:19:21 Set A/D channel type result=40 13:19:21 Set A/D encoding result=40 13:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:21 Set channel filter=0.000000e+000 result=40 13:19:21 Config A/D Result=40 13:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:21 Get A/D filter: -9.255963e+061 result=40 13:19:21 Get A/D value=-858993460 result=40 13:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:21 Aux= 13:19:21 Message to Camera, serial 117717 queued 13:19:57 Received message from Master: op=PointingHead serial=117730 13:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:19:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:19:58 Point started: ret=0 13:19:58 point_skyscan result=0 13:19:59 Check angles 13:19:59 SkyScan query 13:19:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 13:19:59 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 13:19:59 Check angles 13:19:59 SkyScan query 13:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:20:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:20:00 Message to Master queued w/err=0: serial=117730 error=0 13:20:05 Received message from Master: op=Filter serial=117731 13:20:05 Color wheel filter change from 0 to 0 13:20:05 FLIGetFilterPos err=0 currentPosition=0 13:20:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:05 Filter is already there-color wheel unchanged 13:20:05 Received message from Master: op=Shutter serial=117732 13:20:05 Shutter LASER open 13:20:05 Received message from Camera: op=State serial=117734 13:20:05 GetSingleValue result=40 Value=cccccccc 13:20:05 SkyScan query 13:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:20:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:06 Parameters OK 13:20:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:06 Set A/D data flow result=40 13:20:06 Set A/D channel type result=40 13:20:06 Set A/D encoding result=40 13:20:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:06 Set channel filter=0.000000e+000 result=40 13:20:06 Config A/D Result=40 13:20:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:06 Get A/D filter: -9.255963e+061 result=40 13:20:06 Get A/D value=-858993460 result=40 13:20:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:06 Parameters OK 13:20:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:06 Set A/D data flow result=40 13:20:06 Set A/D channel type result=40 13:20:06 Set A/D encoding result=40 13:20:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:06 Set channel filter=0.000000e+000 result=40 13:20:06 Config A/D Result=40 13:20:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:06 Get A/D filter: -9.255963e+061 result=40 13:20:06 Get A/D value=-858993460 result=40 13:20:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:06 Aux= 13:20:06 Message to Camera, serial 117734 queued 13:20:13 Received message from Master: op=Shutter serial=117743 13:20:13 Shutter LASER close 13:20:14 Received message from Master: op=PointingHead serial=117747 13:20:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:20:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:20:14 Point started: ret=0 13:20:14 point_skyscan result=0 13:20:15 Check angles 13:20:15 SkyScan query 13:20:16 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.74<-21516 Statuses=0009 0009 13:20:16 Msec=0 True Az=136.425 Ze=-142.74 Az status=0009 Ze status=0009 13:20:16 Check angles 13:20:16 SkyScan query 13:20:16 SkyScan query done: ret=0 az=154.23<-10282 ze=-121.395<-20093 Statuses=0009 0009 13:20:16 Msec=750 True Az=154.23 Ze=-121.395 Az status=0009 Ze status=0009 13:20:17 Check angles 13:20:17 SkyScan query 13:20:17 SkyScan query done: ret=0 az=171.75<-11450 ze=-100.365<-18691 Statuses=0009 0009 13:20:17 Msec=1500 True Az=171.75 Ze=-100.365 Az status=0009 Ze status=0009 13:20:17 Check angles 13:20:17 SkyScan query 13:20:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 13:20:18 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 13:20:18 Check angles 13:20:18 SkyScan query 13:20:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.47<-15898 Statuses=0008 0009 13:20:19 Msec=3000 True Az=176.01 Ze=-58.47 Az status=0008 Ze status=0009 13:20:19 Check angles 13:20:19 SkyScan query 13:20:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:20:19 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:20:19 Message to Master queued w/err=0: serial=117747 error=0 13:20:24 Received message from Master: op=Filter serial=117748 13:20:24 Color wheel filter change from 0 to 0 13:20:24 FLIGetFilterPos err=0 currentPosition=0 13:20:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:24 Filter is already there-color wheel unchanged 13:20:25 Received message from Master: op=Shutter serial=117749 13:20:25 Shutter LASER close 13:20:25 Received message from Camera: op=State serial=117751 13:20:25 GetSingleValue result=40 Value=cccccccc 13:20:25 SkyScan query 13:20:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:20:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:25 Parameters OK 13:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:25 Set A/D data flow result=40 13:20:25 Set A/D channel type result=40 13:20:25 Set A/D encoding result=40 13:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:25 Set channel filter=0.000000e+000 result=40 13:20:25 Config A/D Result=40 13:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:25 Get A/D filter: -9.255963e+061 result=40 13:20:25 Get A/D value=-858993460 result=40 13:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:25 Parameters OK 13:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:25 Set A/D data flow result=40 13:20:25 Set A/D channel type result=40 13:20:25 Set A/D encoding result=40 13:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:25 Set channel filter=0.000000e+000 result=40 13:20:25 Config A/D Result=40 13:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:25 Get A/D filter: -9.255963e+061 result=40 13:20:25 Get A/D value=-858993460 result=40 13:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:25 Aux= 13:20:25 Message to Camera, serial 117751 queued 13:21:02 Received message from Master: op=PointingHead serial=117764 13:21:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:21:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:21:02 Point started: ret=0 13:21:02 point_skyscan result=0 13:21:03 Check angles 13:21:03 SkyScan query 13:21:04 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.915<-13461 Statuses=0009 0009 13:21:04 Msec=0 True Az=153.18 Ze=-21.915 Az status=0009 Ze status=0009 13:21:04 Check angles 13:21:04 SkyScan query 13:21:05 SkyScan query done: ret=0 az=135.78<-9052 ze=-0.93<-12062 Statuses=0009 0009 13:21:05 Msec=750 True Az=135.78 Ze=-0.93 Az status=0009 Ze status=0009 13:21:05 Check angles 13:21:05 SkyScan query 13:21:05 SkyScan query done: ret=0 az=118.155<-7877 ze=20.025<-10665 Statuses=0009 0009 13:21:05 Msec=1500 True Az=118.155 Ze=20.025 Az status=0009 Ze status=0009 13:21:05 Check angles 13:21:05 SkyScan query 13:21:06 SkyScan query done: ret=0 az=100.77<-6718 ze=40.995<-9267 Statuses=0009 0009 13:21:06 Msec=2250 True Az=100.77 Ze=40.995 Az status=0009 Ze status=0009 13:21:06 Check angles 13:21:06 SkyScan query 13:21:07 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 13:21:07 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 13:21:07 Check angles 13:21:07 SkyScan query 13:21:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:21:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:21:08 Message to Master queued w/err=0: serial=117764 error=0 13:21:13 Received message from Master: op=Filter serial=117765 13:21:13 Color wheel filter change from 0 to 0 13:21:13 FLIGetFilterPos err=0 currentPosition=0 13:21:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:13 Filter is already there-color wheel unchanged 13:21:13 Received message from Master: op=Shutter serial=117766 13:21:13 Shutter LASER close 13:21:13 Received message from Camera: op=State serial=117768 13:21:13 GetSingleValue result=40 Value=cccccccc 13:21:13 SkyScan query 13:21:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:21:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:13 Parameters OK 13:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:13 Set A/D data flow result=40 13:21:13 Set A/D channel type result=40 13:21:13 Set A/D encoding result=40 13:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:13 Set channel filter=0.000000e+000 result=40 13:21:13 Config A/D Result=40 13:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:13 Get A/D filter: -9.255963e+061 result=40 13:21:13 Get A/D value=-858993460 result=40 13:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:13 Parameters OK 13:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:13 Set A/D data flow result=40 13:21:13 Set A/D channel type result=40 13:21:13 Set A/D encoding result=40 13:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:13 Set channel filter=0.000000e+000 result=40 13:21:13 Config A/D Result=40 13:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:13 Get A/D filter: -9.255963e+061 result=40 13:21:13 Get A/D value=-858993460 result=40 13:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:13 Aux= 13:21:13 Message to Camera, serial 117768 queued 13:21:50 Received message from Master: op=PointingHead serial=117781 13:21:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:21:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:21:50 Point started: ret=0 13:21:50 point_skyscan result=0 13:21:51 Check angles 13:21:51 SkyScan query 13:21:52 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 13:21:52 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 13:21:52 Check angles 13:21:52 SkyScan query 13:21:53 SkyScan query done: ret=0 az=127.17<-8478 ze=38.505<-9433 Statuses=0009 0008 13:21:53 Msec=750 True Az=127.17 Ze=38.505 Az status=0009 Ze status=0008 13:21:53 Check angles 13:21:53 SkyScan query 13:21:53 SkyScan query done: ret=0 az=144.705<-9647 ze=38.505<-9433 Statuses=0009 0008 13:21:53 Msec=1500 True Az=144.705 Ze=38.505 Az status=0009 Ze status=0008 13:21:54 Check angles 13:21:54 SkyScan query 13:21:54 SkyScan query done: ret=0 az=162.195<-10813 ze=38.505<-9433 Statuses=0009 0008 13:21:54 Msec=2250 True Az=162.195 Ze=38.505 Az status=0009 Ze status=0008 13:21:54 Check angles 13:21:54 SkyScan query 13:21:55 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:21:55 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:21:55 Check angles 13:21:55 SkyScan query 13:21:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:21:56 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:21:56 Message to Master queued w/err=0: serial=117781 error=0 13:22:01 Received message from Master: op=Filter serial=117782 13:22:01 Color wheel filter change from 0 to 0 13:22:01 FLIGetFilterPos err=0 currentPosition=0 13:22:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:01 Filter is already there-color wheel unchanged 13:22:01 Received message from Master: op=Shutter serial=117783 13:22:01 Shutter LASER close 13:22:01 Received message from Camera: op=State serial=117785 13:22:01 GetSingleValue result=40 Value=cccccccc 13:22:01 SkyScan query 13:22:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:22:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:01 Parameters OK 13:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:01 Set A/D data flow result=40 13:22:01 Set A/D channel type result=40 13:22:01 Set A/D encoding result=40 13:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:01 Set channel filter=0.000000e+000 result=40 13:22:01 Config A/D Result=40 13:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:01 Get A/D filter: -9.255963e+061 result=40 13:22:01 Get A/D value=-858993460 result=40 13:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:01 Parameters OK 13:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:01 Set A/D data flow result=40 13:22:01 Set A/D channel type result=40 13:22:01 Set A/D encoding result=40 13:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:01 Set channel filter=0.000000e+000 result=40 13:22:01 Config A/D Result=40 13:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:01 Get A/D filter: -9.255963e+061 result=40 13:22:01 Get A/D value=-858993460 result=40 13:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:01 Aux= 13:22:01 Message to Camera, serial 117785 queued 13:22:38 Received message from Master: op=PointingHead serial=117798 13:22:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:22:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:22:39 Point started: ret=0 13:22:39 point_skyscan result=0 13:22:39 Check angles 13:22:39 SkyScan query 13:22:40 SkyScan query done: ret=0 az=152.955<-10197 ze=8.67<-11422 Statuses=0009 0009 13:22:40 Msec=0 True Az=152.955 Ze=8.67 Az status=0009 Ze status=0009 13:22:40 Check angles 13:22:40 SkyScan query 13:22:41 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.705<-12847 Statuses=0009 0009 13:22:41 Msec=750 True Az=135.15 Ze=-12.705 Az status=0009 Ze status=0009 13:22:41 Check angles 13:22:41 SkyScan query 13:22:41 SkyScan query done: ret=0 az=117.27<-7818 ze=-34.155<-14277 Statuses=0009 0009 13:22:41 Msec=1500 True Az=117.27 Ze=-34.155 Az status=0009 Ze status=0009 13:22:42 Check angles 13:22:42 SkyScan query 13:22:42 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.555<-15437 Statuses=0009 0009 13:22:42 Msec=2250 True Az=99.915 Ze=-51.555 Az status=0009 Ze status=0009 13:22:42 Check angles 13:22:42 SkyScan query 13:22:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 13:22:43 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 13:22:43 Check angles 13:22:43 SkyScan query 13:22:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:22:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:22:44 Message to Master queued w/err=0: serial=117798 error=0 13:22:49 Received message from Master: op=Filter serial=117799 13:22:49 Color wheel filter change from 0 to 0 13:22:49 FLIGetFilterPos err=0 currentPosition=0 13:22:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:49 Filter is already there-color wheel unchanged 13:22:49 Received message from Master: op=Shutter serial=117800 13:22:49 Shutter LASER close 13:22:49 Received message from Camera: op=State serial=117802 13:22:49 GetSingleValue result=40 Value=cccccccc 13:22:49 SkyScan query 13:22:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:22:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:49 Parameters OK 13:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:49 Set A/D data flow result=40 13:22:49 Set A/D channel type result=40 13:22:49 Set A/D encoding result=40 13:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:49 Set channel filter=0.000000e+000 result=40 13:22:49 Config A/D Result=40 13:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:49 Get A/D filter: -9.255963e+061 result=40 13:22:49 Get A/D value=-858993460 result=40 13:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:49 Parameters OK 13:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:49 Set A/D data flow result=40 13:22:49 Set A/D channel type result=40 13:22:49 Set A/D encoding result=40 13:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:49 Set channel filter=0.000000e+000 result=40 13:22:49 Config A/D Result=40 13:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:49 Get A/D filter: -9.255963e+061 result=40 13:22:49 Get A/D value=-858993460 result=40 13:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:49 Aux= 13:22:49 Message to Camera, serial 117802 queued 13:23:26 Received message from Master: op=PointingHead serial=117815 13:23:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:23:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:23:27 Point started: ret=0 13:23:27 point_skyscan result=0 13:23:27 Check angles 13:23:27 SkyScan query 13:23:28 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.18<-17412 Statuses=0009 0009 13:23:28 Msec=0 True Az=108.885 Ze=-81.18 Az status=0009 Ze status=0009 13:23:28 Check angles 13:23:28 SkyScan query 13:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.15<-18810 Statuses=0008 0009 13:23:29 Msec=750 True Az=112.995 Ze=-102.15 Az status=0008 Ze status=0009 13:23:29 Check angles 13:23:29 SkyScan query 13:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.54<-20236 Statuses=0008 0009 13:23:29 Msec=1500 True Az=112.995 Ze=-123.54 Az status=0008 Ze status=0009 13:23:30 Check angles 13:23:30 SkyScan query 13:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 13:23:30 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 13:23:30 Check angles 13:23:30 SkyScan query 13:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.45<-23030 Statuses=0008 0009 13:23:31 Msec=3000 True Az=112.995 Ze=-165.45 Az status=0008 Ze status=0009 13:23:31 Check angles 13:23:31 SkyScan query 13:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:23:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:23:32 Message to Master queued w/err=0: serial=117815 error=0 13:23:37 Received message from Master: op=Filter serial=117816 13:23:37 Color wheel filter change from 0 to 0 13:23:37 FLIGetFilterPos err=0 currentPosition=0 13:23:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:37 Filter is already there-color wheel unchanged 13:23:37 Received message from Master: op=Shutter serial=117817 13:23:37 Shutter LASER open 13:23:37 Received message from Camera: op=State serial=117819 13:23:37 GetSingleValue result=40 Value=cccccccc 13:23:37 SkyScan query 13:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:23:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:38 Parameters OK 13:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:38 Set A/D data flow result=40 13:23:38 Set A/D channel type result=40 13:23:38 Set A/D encoding result=40 13:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:38 Set channel filter=0.000000e+000 result=40 13:23:38 Config A/D Result=40 13:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:38 Get A/D filter: -9.255963e+061 result=40 13:23:38 Get A/D value=-858993460 result=40 13:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:38 Parameters OK 13:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:38 Set A/D data flow result=40 13:23:38 Set A/D channel type result=40 13:23:38 Set A/D encoding result=40 13:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:38 Set channel filter=0.000000e+000 result=40 13:23:38 Config A/D Result=40 13:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:38 Get A/D filter: -9.255963e+061 result=40 13:23:38 Get A/D value=-858993460 result=40 13:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:38 Aux= 13:23:38 Message to Camera, serial 117819 queued 13:23:46 Received message from Master: op=Shutter serial=117829 13:23:46 Shutter LASER close 13:23:47 Received message from Master: op=PointingHead serial=117833 13:23:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:23:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:23:47 Point started: ret=0 13:23:47 point_skyscan result=0 13:23:48 Check angles 13:23:48 SkyScan query 13:23:48 SkyScan query done: ret=0 az=90.015<-6001 ze=157.305<-1513 Statuses=0009 0009 13:23:48 Msec=0 True Az=90.015 Ze=157.305 Az status=0009 Ze status=0009 13:23:48 Check angles 13:23:48 SkyScan query 13:23:49 SkyScan query done: ret=0 az=72.54<-4836 ze=136.35<-2910 Statuses=0009 0009 13:23:49 Msec=750 True Az=72.54 Ze=136.35 Az status=0009 Ze status=0009 13:23:49 Check angles 13:23:49 SkyScan query 13:23:50 SkyScan query done: ret=0 az=55.095<-3673 ze=115.425<-4305 Statuses=0009 0009 13:23:50 Msec=1500 True Az=55.095 Ze=115.425 Az status=0009 Ze status=0009 13:23:50 Check angles 13:23:50 SkyScan query 13:23:50 SkyScan query done: ret=0 az=40.965<-2731 ze=94.41<-5706 Statuses=0009 0009 13:23:50 Msec=2250 True Az=40.965 Ze=94.41 Az status=0009 Ze status=0009 13:23:51 Check angles 13:23:51 SkyScan query 13:23:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.485<-7101 Statuses=0008 0009 13:23:51 Msec=3000 True Az=40.995 Ze=73.485 Az status=0008 Ze status=0009 13:23:51 Check angles 13:23:51 SkyScan query 13:23:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 13:23:52 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 13:23:52 Check angles 13:23:52 SkyScan query 13:23:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:23:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:23:53 Message to Master queued w/err=0: serial=117833 error=0 13:23:58 Received message from Master: op=Filter serial=117834 13:23:58 Color wheel filter change from 0 to 0 13:23:58 FLIGetFilterPos err=0 currentPosition=0 13:23:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:58 Filter is already there-color wheel unchanged 13:23:58 Received message from Master: op=Shutter serial=117835 13:23:58 Shutter LASER close 13:23:58 Received message from Camera: op=State serial=117837 13:23:58 GetSingleValue result=40 Value=cccccccc 13:23:58 SkyScan query 13:23:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:23:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:59 Parameters OK 13:23:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:59 Set A/D data flow result=40 13:23:59 Set A/D channel type result=40 13:23:59 Set A/D encoding result=40 13:23:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:59 Set channel filter=0.000000e+000 result=40 13:23:59 Config A/D Result=40 13:23:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:59 Get A/D filter: -9.255963e+061 result=40 13:23:59 Get A/D value=-858993460 result=40 13:23:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:59 Parameters OK 13:23:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:59 Set A/D data flow result=40 13:23:59 Set A/D channel type result=40 13:23:59 Set A/D encoding result=40 13:23:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:59 Set channel filter=0.000000e+000 result=40 13:23:59 Config A/D Result=40 13:23:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:59 Get A/D filter: -9.255963e+061 result=40 13:23:59 Get A/D value=-858993460 result=40 13:23:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:59 Aux= 13:23:59 Message to Camera, serial 117837 queued 13:24:36 Received message from Master: op=PointingHead serial=117850 13:24:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:24:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:24:36 Point started: ret=0 13:24:36 point_skyscan result=0 13:24:37 Check angles 13:24:37 SkyScan query 13:24:37 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 13:24:37 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 13:24:37 Check angles 13:24:37 SkyScan query 13:24:38 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 13:24:38 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 13:24:38 Check angles 13:24:38 SkyScan query 13:24:39 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 13:24:39 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 13:24:39 Check angles 13:24:39 SkyScan query 13:24:40 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 13:24:40 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 13:24:40 Check angles 13:24:40 SkyScan query 13:24:40 SkyScan query done: ret=0 az=134.175<-8945 ze=66.495<-7567 Statuses=0009 0008 13:24:40 Msec=3000 True Az=134.175 Ze=66.495 Az status=0009 Ze status=0008 13:24:40 Check angles 13:24:40 SkyScan query 13:24:41 SkyScan query done: ret=0 az=151.605<-10107 ze=66.495<-7567 Statuses=0009 0008 13:24:41 Msec=3750 True Az=151.605 Ze=66.495 Az status=0009 Ze status=0008 13:24:41 Check angles 13:24:41 SkyScan query 13:24:42 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:24:42 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:24:42 Message to Master queued w/err=0: serial=117850 error=0 13:24:47 Received message from Master: op=Filter serial=117851 13:24:47 Color wheel filter change from 0 to 0 13:24:47 FLIGetFilterPos err=0 currentPosition=0 13:24:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:47 Filter is already there-color wheel unchanged 13:24:47 Received message from Master: op=Shutter serial=117852 13:24:47 Shutter LASER close 13:24:47 Received message from Camera: op=State serial=117854 13:24:47 GetSingleValue result=40 Value=cccccccc 13:24:47 SkyScan query 13:24:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:24:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:48 Parameters OK 13:24:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:48 Set A/D data flow result=40 13:24:48 Set A/D channel type result=40 13:24:48 Set A/D encoding result=40 13:24:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:48 Set channel filter=0.000000e+000 result=40 13:24:48 Config A/D Result=40 13:24:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:48 Get A/D filter: -9.255963e+061 result=40 13:24:48 Get A/D value=-858993460 result=40 13:24:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:48 Parameters OK 13:24:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:48 Set A/D data flow result=40 13:24:48 Set A/D channel type result=40 13:24:48 Set A/D encoding result=40 13:24:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:48 Set channel filter=0.000000e+000 result=40 13:24:48 Config A/D Result=40 13:24:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:48 Get A/D filter: -9.255963e+061 result=40 13:24:48 Get A/D value=-858993460 result=40 13:24:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:48 Aux= 13:24:48 Message to Camera, serial 117854 queued 13:25:24 Received message from Master: op=PointingHead serial=117867 13:25:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:25:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:25:25 Point started: ret=0 13:25:25 point_skyscan result=0 13:25:25 Check angles 13:25:25 SkyScan query 13:25:26 SkyScan query done: ret=0 az=134.79<-8986 ze=36.585<-9561 Statuses=0009 0009 13:25:26 Msec=0 True Az=134.79 Ze=36.585 Az status=0009 Ze status=0009 13:25:26 Check angles 13:25:26 SkyScan query 13:25:27 SkyScan query done: ret=0 az=117.255<-7817 ze=15.675<-10955 Statuses=0009 0009 13:25:27 Msec=750 True Az=117.255 Ze=15.675 Az status=0009 Ze status=0009 13:25:27 Check angles 13:25:27 SkyScan query 13:25:28 SkyScan query done: ret=0 az=100.02<-6668 ze=-5.325<-12355 Statuses=0009 0009 13:25:28 Msec=1500 True Az=100.02 Ze=-5.325 Az status=0009 Ze status=0009 13:25:28 Check angles 13:25:28 SkyScan query 13:25:28 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.25<-13750 Statuses=0009 0009 13:25:28 Msec=2250 True Az=82.425 Ze=-26.25 Az status=0009 Ze status=0009 13:25:28 Check angles 13:25:28 SkyScan query 13:25:29 SkyScan query done: ret=0 az=65.025<-4335 ze=-38.565<-14571 Statuses=0009 0008 13:25:29 Msec=3000 True Az=65.025 Ze=-38.565 Az status=0009 Ze status=0008 13:25:29 Check angles 13:25:29 SkyScan query 13:25:30 SkyScan query done: ret=0 az=47.595<-3173 ze=-38.535<-14569 Statuses=0009 0008 13:25:30 Msec=3750 True Az=47.595 Ze=-38.535 Az status=0009 Ze status=0008 13:25:30 Check angles 13:25:30 SkyScan query 13:25:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:25:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:25:31 Message to Master queued w/err=0: serial=117867 error=0 13:25:36 Received message from Master: op=Filter serial=117868 13:25:36 Color wheel filter change from 0 to 0 13:25:36 FLIGetFilterPos err=0 currentPosition=0 13:25:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:36 Filter is already there-color wheel unchanged 13:25:36 Received message from Master: op=Shutter serial=117869 13:25:36 Shutter LASER close 13:25:36 Received message from Camera: op=State serial=117871 13:25:36 GetSingleValue result=40 Value=cccccccc 13:25:36 SkyScan query 13:25:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:25:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:36 Parameters OK 13:25:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:36 Set A/D data flow result=40 13:25:36 Set A/D channel type result=40 13:25:36 Set A/D encoding result=40 13:25:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:36 Set channel filter=0.000000e+000 result=40 13:25:36 Config A/D Result=40 13:25:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:36 Get A/D filter: -9.255963e+061 result=40 13:25:36 Get A/D value=-858993460 result=40 13:25:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:36 Parameters OK 13:25:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:36 Set A/D data flow result=40 13:25:36 Set A/D channel type result=40 13:25:36 Set A/D encoding result=40 13:25:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:36 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-13 13:25:36] 13:25:36 Config A/D Result=40 13:25:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:36 Get A/D filter: -9.255963e+061 result=40 13:25:36 Get A/D value=-858993460 result=40 13:25:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:36 Aux= 13:25:36 Message to Camera, serial 117871 queued 13:26:13 Received message from Master: op=PointingHead serial=117884 13:26:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:26:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:26:14 Point started: ret=0 13:26:14 point_skyscan result=0 13:26:14 Check angles 13:26:14 SkyScan query 13:26:15 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.04<-16536 Statuses=0009 0009 13:26:15 Msec=0 True Az=63.84 Ze=-68.04 Az status=0009 Ze status=0009 13:26:15 Check angles 13:26:15 SkyScan query 13:26:16 SkyScan query done: ret=0 az=81.195<-5413 ze=-89.01<-17934 Statuses=0009 0009 13:26:16 Msec=750 True Az=81.195 Ze=-89.01 Az status=0009 Ze status=0009 13:26:16 Check angles 13:26:16 SkyScan query 13:26:16 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.49<-19366 Statuses=0009 0009 13:26:16 Msec=1500 True Az=99.06 Ze=-110.49 Az status=0009 Ze status=0009 13:26:17 Check angles 13:26:17 SkyScan query 13:26:17 SkyScan query done: ret=0 az=116.58<-7772 ze=-131.37<-20758 Statuses=0009 0009 13:26:17 Msec=2250 True Az=116.58 Ze=-131.37 Az status=0009 Ze status=0009 13:26:17 Check angles 13:26:17 SkyScan query 13:26:18 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 13:26:18 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 13:26:18 Check angles 13:26:18 SkyScan query 13:26:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:26:19 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:26:19 Message to Master queued w/err=0: serial=117884 error=0 13:26:24 Received message from Master: op=Filter serial=117885 13:26:24 Color wheel filter change from 0 to 0 13:26:24 FLIGetFilterPos err=0 currentPosition=0 13:26:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:24 Filter is already there-color wheel unchanged 13:26:24 Received message from Master: op=Shutter serial=117886 13:26:24 Shutter LASER close 13:26:24 Received message from Camera: op=State serial=117888 13:26:24 GetSingleValue result=40 Value=cccccccc 13:26:24 SkyScan query 13:26:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:26:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:24 Parameters OK 13:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:24 Set A/D data flow result=40 13:26:24 Set A/D channel type result=40 13:26:24 Set A/D encoding result=40 13:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:24 Set channel filter=0.000000e+000 result=40 13:26:24 Config A/D Result=40 13:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:24 Get A/D filter: -9.255963e+061 result=40 13:26:24 Get A/D value=-858993460 result=40 13:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:24 Parameters OK 13:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:24 Set A/D data flow result=40 13:26:24 Set A/D channel type result=40 13:26:24 Set A/D encoding result=40 13:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:24 Set channel filter=0.000000e+000 result=40 13:26:24 Config A/D Result=40 13:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:24 Get A/D filter: -9.255963e+061 result=40 13:26:24 Get A/D value=-858993460 result=40 13:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:24 Aux= 13:26:24 Message to Camera, serial 117888 queued 13:27:01 Received message from Master: op=PointingHead serial=117901 13:27:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:27:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:27:02 Point started: ret=0 13:27:02 point_skyscan result=0 13:27:02 Check angles 13:27:02 SkyScan query 13:27:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 13:27:03 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 13:27:03 Check angles 13:27:03 SkyScan query 13:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:27:04 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:27:04 Message to Master queued w/err=0: serial=117901 error=0 13:27:09 Received message from Master: op=Filter serial=117902 13:27:09 Color wheel filter change from 0 to 0 13:27:09 FLIGetFilterPos err=0 currentPosition=0 13:27:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:09 Filter is already there-color wheel unchanged 13:27:09 Received message from Master: op=Shutter serial=117903 13:27:09 Shutter LASER open 13:27:09 Received message from Camera: op=State serial=117905 13:27:09 GetSingleValue result=40 Value=cccccccc 13:27:09 SkyScan query 13:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:27:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:10 Parameters OK 13:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:10 Set A/D data flow result=40 13:27:10 Set A/D channel type result=40 13:27:10 Set A/D encoding result=40 13:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:10 Set channel filter=0.000000e+000 result=40 13:27:10 Config A/D Result=40 13:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:10 Get A/D filter: -9.255963e+061 result=40 13:27:10 Get A/D value=-858993460 result=40 13:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:10 Parameters OK 13:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:10 Set A/D data flow result=40 13:27:10 Set A/D channel type result=40 13:27:10 Set A/D encoding result=40 13:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:10 Set channel filter=0.000000e+000 result=40 13:27:10 Config A/D Result=40 13:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:10 Get A/D filter: -9.255963e+061 result=40 13:27:10 Get A/D value=-858993460 result=40 13:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:10 Aux= 13:27:10 Message to Camera, serial 117905 queued 13:27:18 Received message from Master: op=Shutter serial=117915 13:27:18 Shutter LASER close 13:27:19 Received message from Master: op=PointingHead serial=117919 13:27:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:27:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:27:19 Point started: ret=0 13:27:19 point_skyscan result=0 13:27:20 Check angles 13:27:20 SkyScan query 13:27:20 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.55<-21570 Statuses=0009 0009 13:27:20 Msec=0 True Az=135.765 Ze=-143.55 Az status=0009 Ze status=0009 13:27:20 Check angles 13:27:20 SkyScan query 13:27:21 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.565<-20171 Statuses=0009 0009 13:27:21 Msec=750 True Az=153.24 Ze=-122.565 Az status=0009 Ze status=0009 13:27:21 Check angles 13:27:21 SkyScan query 13:27:22 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.655<-18777 Statuses=0009 0009 13:27:22 Msec=1500 True Az=170.79 Ze=-101.655 Az status=0009 Ze status=0009 13:27:22 Check angles 13:27:22 SkyScan query 13:27:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.61<-17374 Statuses=0008 0009 13:27:23 Msec=2250 True Az=176.01 Ze=-80.61 Az status=0008 Ze status=0009 13:27:23 Check angles 13:27:23 SkyScan query 13:27:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.28<-15952 Statuses=0008 0009 13:27:23 Msec=3000 True Az=176.01 Ze=-59.28 Az status=0008 Ze status=0009 13:27:23 Check angles 13:27:23 SkyScan query 13:27:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:27:24 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:27:24 Message to Master queued w/err=0: serial=117919 error=0 13:27:29 Received message from Master: op=Filter serial=117920 13:27:29 Color wheel filter change from 0 to 0 13:27:29 FLIGetFilterPos err=0 currentPosition=0 13:27:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:29 Filter is already there-color wheel unchanged 13:27:29 Received message from Master: op=Shutter serial=117921 13:27:29 Shutter LASER close 13:27:29 Received message from Camera: op=State serial=117923 13:27:29 GetSingleValue result=40 Value=cccccccc 13:27:29 SkyScan query 13:27:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:27:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:30 Parameters OK 13:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:30 Set A/D data flow result=40 13:27:30 Set A/D channel type result=40 13:27:30 Set A/D encoding result=40 13:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:30 Set channel filter=0.000000e+000 result=40 13:27:30 Config A/D Result=40 13:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:30 Get A/D filter: -9.255963e+061 result=40 13:27:30 Get A/D value=-858993460 result=40 13:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:30 Parameters OK 13:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:30 Set A/D data flow result=40 13:27:30 Set A/D channel type result=40 13:27:30 Set A/D encoding result=40 13:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:30 Set channel filter=0.000000e+000 result=40 13:27:30 Config A/D Result=40 13:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:30 Get A/D filter: -9.255963e+061 result=40 13:27:30 Get A/D value=-858993460 result=40 13:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:30 Aux= 13:27:30 Message to Camera, serial 117923 queued 13:28:07 Received message from Master: op=PointingHead serial=117936 13:28:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:28:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:28:07 Point started: ret=0 13:28:07 point_skyscan result=0 13:28:08 Check angles 13:28:08 SkyScan query 13:28:08 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.63<-13442 Statuses=0009 0009 13:28:08 Msec=0 True Az=152.91 Ze=-21.63 Az status=0009 Ze status=0009 13:28:09 Check angles 13:28:09 SkyScan query 13:28:09 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.615<-12041 Statuses=0009 0009 13:28:09 Msec=750 True Az=135.42 Ze=-0.615 Az status=0009 Ze status=0009 13:28:09 Check angles 13:28:09 SkyScan query 13:28:10 SkyScan query done: ret=0 az=117.81<-7854 ze=20.295<-10647 Statuses=0009 0009 13:28:10 Msec=1500 True Az=117.81 Ze=20.295 Az status=0009 Ze status=0009 13:28:10 Check angles 13:28:10 SkyScan query 13:28:11 SkyScan query done: ret=0 az=100.425<-6695 ze=41.31<-9246 Statuses=0009 0009 13:28:11 Msec=2250 True Az=100.425 Ze=41.31 Az status=0009 Ze status=0009 13:28:11 Check angles 13:28:11 SkyScan query 13:28:11 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 13:28:11 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 13:28:12 Check angles 13:28:12 SkyScan query 13:28:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:28:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:28:12 Message to Master queued w/err=0: serial=117936 error=0 13:28:17 Received message from Master: op=Filter serial=117937 13:28:17 Color wheel filter change from 0 to 0 13:28:17 FLIGetFilterPos err=0 currentPosition=0 13:28:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:17 Filter is already there-color wheel unchanged 13:28:17 Received message from Master: op=Shutter serial=117938 13:28:17 Shutter LASER close 13:28:17 Received message from Camera: op=State serial=117940 13:28:17 GetSingleValue result=40 Value=cccccccc 13:28:17 SkyScan query 13:28:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:28:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:18 Parameters OK 13:28:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:18 Set A/D data flow result=40 13:28:18 Set A/D channel type result=40 13:28:18 Set A/D encoding result=40 13:28:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:18 Set channel filter=0.000000e+000 result=40 13:28:18 Config A/D Result=40 13:28:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:18 Get A/D filter: -9.255963e+061 result=40 13:28:18 Get A/D value=-858993460 result=40 13:28:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:18 Parameters OK 13:28:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:18 Set A/D data flow result=40 13:28:18 Set A/D channel type result=40 13:28:18 Set A/D encoding result=40 13:28:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:18 Set channel filter=0.000000e+000 result=40 13:28:18 Config A/D Result=40 13:28:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:18 Get A/D filter: -9.255963e+061 result=40 13:28:18 Get A/D value=-858993460 result=40 13:28:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:18 Aux= 13:28:18 Message to Camera, serial 117940 queued 13:28:55 Received message from Master: op=PointingHead serial=117953 13:28:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:28:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:28:55 Point started: ret=0 13:28:55 point_skyscan result=0 13:28:56 Check angles 13:28:56 SkyScan query 13:28:57 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 13:28:57 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 13:28:57 Check angles 13:28:57 SkyScan query 13:28:57 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 13:28:57 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 13:28:57 Check angles 13:28:57 SkyScan query 13:28:58 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 13:28:58 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 13:28:58 Check angles 13:28:58 SkyScan query 13:28:59 SkyScan query done: ret=0 az=161.19<-10746 ze=38.505<-9433 Statuses=0009 0008 13:28:59 Msec=2250 True Az=161.19 Ze=38.505 Az status=0009 Ze status=0008 13:28:59 Check angles 13:28:59 SkyScan query 13:29:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:29:00 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:29:00 Check angles 13:29:00 SkyScan query 13:29:00 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:29:00 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:29:00 Message to Master queued w/err=0: serial=117953 error=0 13:29:05 Received message from Master: op=Filter serial=117954 13:29:05 Color wheel filter change from 0 to 0 13:29:05 FLIGetFilterPos err=0 currentPosition=0 13:29:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:05 Filter is already there-color wheel unchanged 13:29:05 Received message from Master: op=Shutter serial=117955 13:29:05 Shutter LASER close 13:29:05 Received message from Camera: op=State serial=117957 13:29:05 GetSingleValue result=40 Value=cccccccc 13:29:05 SkyScan query 13:29:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:29:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:06 Parameters OK 13:29:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:06 Set A/D data flow result=40 13:29:06 Set A/D channel type result=40 13:29:06 Set A/D encoding result=40 13:29:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:06 Set channel filter=0.000000e+000 result=40 13:29:06 Config A/D Result=40 13:29:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:06 Get A/D filter: -9.255963e+061 result=40 13:29:06 Get A/D value=-858993460 result=40 13:29:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:06 Parameters OK 13:29:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:06 Set A/D data flow result=40 13:29:06 Set A/D channel type result=40 13:29:06 Set A/D encoding result=40 13:29:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:06 Set channel filter=0.000000e+000 result=40 13:29:06 Config A/D Result=40 13:29:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:06 Get A/D filter: -9.255963e+061 result=40 13:29:06 Get A/D value=-858993460 result=40 13:29:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:06 Aux= 13:29:06 Message to Camera, serial 117957 queued 13:29:42 Received message from Master: op=PointingHead serial=117969 13:29:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:29:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:29:42 Point started: ret=0 13:29:42 point_skyscan result=0 13:29:43 Check angles 13:29:43 SkyScan query 13:29:44 SkyScan query done: ret=0 az=152.955<-10197 ze=8.865<-11409 Statuses=0009 0009 13:29:44 Msec=0 True Az=152.955 Ze=8.865 Az status=0009 Ze status=0009 13:29:44 Check angles 13:29:44 SkyScan query 13:29:44 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.51<-12834 Statuses=0009 0009 13:29:44 Msec=750 True Az=135.135 Ze=-12.51 Az status=0009 Ze status=0009 13:29:45 Check angles 13:29:45 SkyScan query 13:29:45 SkyScan query done: ret=0 az=117.285<-7819 ze=-33.96<-14264 Statuses=0009 0009 13:29:45 Msec=1500 True Az=117.285 Ze=-33.96 Az status=0009 Ze status=0009 13:29:45 Check angles 13:29:45 SkyScan query 13:29:46 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.57<-15438 Statuses=0009 0009 13:29:46 Msec=2250 True Az=99.915 Ze=-51.57 Az status=0009 Ze status=0009 13:29:46 Check angles 13:29:46 SkyScan query 13:29:47 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 13:29:47 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 13:29:47 Check angles 13:29:47 SkyScan query 13:29:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:29:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:29:47 Message to Master queued w/err=0: serial=117969 error=0 13:29:52 Received message from Master: op=Filter serial=117970 13:29:52 Color wheel filter change from 0 to 0 13:29:52 FLIGetFilterPos err=0 currentPosition=0 13:29:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:52 Filter is already there-color wheel unchanged 13:29:53 Received message from Master: op=Shutter serial=117971 13:29:53 Shutter LASER close 13:29:53 Received message from Camera: op=State serial=117973 13:29:53 GetSingleValue result=40 Value=cccccccc 13:29:53 SkyScan query 13:29:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:29:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:53 Parameters OK 13:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:53 Set A/D data flow result=40 13:29:53 Set A/D channel type result=40 13:29:53 Set A/D encoding result=40 13:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:53 Set channel filter=0.000000e+000 result=40 13:29:53 Config A/D Result=40 13:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:53 Get A/D filter: -9.255963e+061 result=40 13:29:53 Get A/D value=-858993460 result=40 13:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:53 Parameters OK 13:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:53 Set A/D data flow result=40 13:29:53 Set A/D channel type result=40 13:29:53 Set A/D encoding result=40 13:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:53 Set channel filter=0.000000e+000 result=40 13:29:53 Config A/D Result=40 13:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:53 Get A/D filter: -9.255963e+061 result=40 13:29:53 Get A/D value=-858993460 result=40 13:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:53 Aux= 13:29:53 Message to Camera, serial 117973 queued 13:30:30 Received message from Master: op=PointingHead serial=117986 13:30:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:30:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:30:30 Point started: ret=0 13:30:30 point_skyscan result=0 13:30:31 Check angles 13:30:31 SkyScan query 13:30:32 SkyScan query done: ret=0 az=109.065<-7271 ze=-81.15<-17410 Statuses=0009 0009 13:30:32 Msec=0 True Az=109.065 Ze=-81.15 Az status=0009 Ze status=0009 13:30:32 Check angles 13:30:32 SkyScan query 13:30:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 13:30:33 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 13:30:33 Check angles 13:30:33 SkyScan query 13:30:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 13:30:33 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 13:30:33 Check angles 13:30:33 SkyScan query 13:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.03<-21602 Statuses=0008 0009 13:30:34 Msec=2250 True Az=112.995 Ze=-144.03 Az status=0008 Ze status=0009 13:30:34 Check angles 13:30:34 SkyScan query 13:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 13:30:35 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 13:30:35 Check angles 13:30:35 SkyScan query 13:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:30:36 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:30:36 Message to Master queued w/err=0: serial=117986 error=0 13:30:41 Received message from Master: op=Filter serial=117987 13:30:41 Color wheel filter change from 0 to 0 13:30:41 FLIGetFilterPos err=0 currentPosition=0 13:30:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:41 Filter is already there-color wheel unchanged 13:30:41 Received message from Master: op=Shutter serial=117988 13:30:41 Shutter LASER open 13:30:41 Received message from Camera: op=State serial=117990 13:30:41 GetSingleValue result=40 Value=cccccccc 13:30:41 SkyScan query 13:30:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:30:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:41 Parameters OK 13:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:41 Set A/D data flow result=40 13:30:41 Set A/D channel type result=40 13:30:41 Set A/D encoding result=40 13:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:41 Set channel filter=0.000000e+000 result=40 13:30:41 Config A/D Result=40 13:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:41 Get A/D filter: -9.255963e+061 result=40 13:30:41 Get A/D value=-858993460 result=40 13:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:41 Parameters OK 13:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:41 Set A/D data flow result=40 13:30:41 Set A/D channel type result=40 13:30:41 Set A/D encoding result=40 13:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:41 Set channel filter=0.000000e+000 result=40 13:30:41 Config A/D Result=40 13:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:41 Get A/D filter: -9.255963e+061 result=40 13:30:41 Get A/D value=-858993460 result=40 13:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:41 Aux= 13:30:41 Message to Camera, serial 117990 queued 13:30:50 Received message from Master: op=Shutter serial=118000 13:30:50 Shutter LASER close 13:30:50 Received message from Master: op=PointingHead serial=118004 13:30:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:30:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:30:51 Point started: ret=0 13:30:51 point_skyscan result=0 13:30:51 Check angles 13:30:51 SkyScan query 13:30:52 SkyScan query done: ret=0 az=89.64<-5976 ze=156.915<-1539 Statuses=0009 0009 13:30:52 Msec=0 True Az=89.64 Ze=156.915 Az status=0009 Ze status=0009 13:30:52 Check angles 13:30:52 SkyScan query 13:30:53 SkyScan query done: ret=0 az=72.06<-4804 ze=135.96<-2936 Statuses=0009 0009 13:30:53 Msec=750 True Az=72.06 Ze=135.96 Az status=0009 Ze status=0009 13:30:53 Check angles 13:30:53 SkyScan query 13:30:53 SkyScan query done: ret=0 az=54.78<-3652 ze=115.005<-4333 Statuses=0009 0009 13:30:53 Msec=1500 True Az=54.78 Ze=115.005 Az status=0009 Ze status=0009 13:30:54 Check angles 13:30:54 SkyScan query 13:30:54 SkyScan query done: ret=0 az=40.935<-2729 ze=94.02<-5732 Statuses=0009 0009 13:30:54 Msec=2250 True Az=40.935 Ze=94.02 Az status=0009 Ze status=0009 13:30:54 Check angles 13:30:54 SkyScan query 13:30:55 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 13:30:55 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 13:30:55 Check angles 13:30:55 SkyScan query 13:30:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 13:30:56 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 13:30:56 Check angles 13:30:56 SkyScan query 13:30:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:30:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:30:56 Message to Master queued w/err=0: serial=118004 error=0 13:31:01 Received message from Master: op=Filter serial=118005 13:31:01 Color wheel filter change from 0 to 0 13:31:01 FLIGetFilterPos err=0 currentPosition=0 13:31:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:01 Filter is already there-color wheel unchanged 13:31:02 Received message from Master: op=Shutter serial=118006 13:31:02 Shutter LASER close 13:31:02 Received message from Camera: op=State serial=118008 13:31:02 GetSingleValue result=40 Value=cccccccc 13:31:02 SkyScan query 13:31:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:31:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:02 Parameters OK 13:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:02 Set A/D data flow result=40 13:31:02 Set A/D channel type result=40 13:31:02 Set A/D encoding result=40 13:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:02 Set channel filter=0.000000e+000 result=40 13:31:02 Config A/D Result=40 13:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:02 Get A/D filter: -9.255963e+061 result=40 13:31:02 Get A/D value=-858993460 result=40 13:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:02 Parameters OK 13:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:02 Set A/D data flow result=40 13:31:02 Set A/D channel type result=40 13:31:02 Set A/D encoding result=40 13:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:02 Set channel filter=0.000000e+000 result=40 13:31:02 Config A/D Result=40 13:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:02 Get A/D filter: -9.255963e+061 result=40 13:31:02 Get A/D value=-858993460 result=40 13:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:02 Aux= 13:31:02 Message to Camera, serial 118008 queued 13:31:39 Received message from Master: op=PointingHead serial=118021 13:31:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:31:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:31:40 Point started: ret=0 13:31:40 point_skyscan result=0 13:31:40 Check angles 13:31:40 SkyScan query 13:31:41 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 13:31:41 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 13:31:41 Check angles 13:31:41 SkyScan query 13:31:42 SkyScan query done: ret=0 az=81.81<-5454 ze=66.51<-7566 Statuses=0009 0008 13:31:42 Msec=750 True Az=81.81 Ze=66.51 Az status=0009 Ze status=0008 13:31:42 Check angles 13:31:42 SkyScan query 13:31:42 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 13:31:42 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 13:31:43 Check angles 13:31:43 SkyScan query 13:31:43 SkyScan query done: ret=0 az=117.33<-7822 ze=66.495<-7567 Statuses=0009 0008 13:31:43 Msec=2250 True Az=117.33 Ze=66.495 Az status=0009 Ze status=0008 13:31:43 Check angles 13:31:43 SkyScan query 13:31:44 SkyScan query done: ret=0 az=135.045<-9003 ze=66.495<-7567 Statuses=0009 0008 13:31:44 Msec=3000 True Az=135.045 Ze=66.495 Az status=0009 Ze status=0008 13:31:44 Check angles 13:31:44 SkyScan query 13:31:45 SkyScan query done: ret=0 az=152.34<-10156 ze=66.495<-7567 Statuses=0009 0008 13:31:45 Msec=3750 True Az=152.34 Ze=66.495 Az status=0009 Ze status=0008 13:31:45 Check angles 13:31:45 SkyScan query 13:31:45 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:31:45 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:31:45 Message to Master queued w/err=0: serial=118021 error=0 13:31:50 Received message from Master: op=Filter serial=118022 13:31:50 Color wheel filter change from 0 to 0 13:31:50 FLIGetFilterPos err=0 currentPosition=0 13:31:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:50 Filter is already there-color wheel unchanged 13:31:51 Received message from Master: op=Shutter serial=118023 13:31:51 Shutter LASER close 13:31:51 Received message from Camera: op=State serial=118025 13:31:51 GetSingleValue result=40 Value=cccccccc 13:31:51 SkyScan query 13:31:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:31:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:51 Parameters OK 13:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:51 Set A/D data flow result=40 13:31:51 Set A/D channel type result=40 13:31:51 Set A/D encoding result=40 13:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:51 Set channel filter=0.000000e+000 result=40 13:31:51 Config A/D Result=40 13:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:51 Get A/D filter: -9.255963e+061 result=40 13:31:51 Get A/D value=-858993460 result=40 13:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:51 Parameters OK 13:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:51 Set A/D data flow result=40 13:31:51 Set A/D channel type result=40 13:31:51 Set A/D encoding result=40 13:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:51 Set channel filter=0.000000e+000 result=40 13:31:51 Config A/D Result=40 13:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:51 Get A/D filter: -9.255963e+061 result=40 13:31:51 Get A/D value=-858993460 result=40 13:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:51 Aux= 13:31:51 Message to Camera, serial 118025 queued 13:32:27 Received message from Master: op=PointingHead serial=118037 13:32:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:32:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:32:27 Point started: ret=0 13:32:27 point_skyscan result=0 13:32:28 Check angles 13:32:28 SkyScan query 13:32:29 SkyScan query done: ret=0 az=135.105<-9007 ze=36.825<-9545 Statuses=0009 0009 13:32:29 Msec=0 True Az=135.105 Ze=36.825 Az status=0009 Ze status=0009 13:32:29 Check angles 13:32:29 SkyScan query 13:32:30 SkyScan query done: ret=0 az=117.285<-7819 ze=15.495<-10967 Statuses=0009 0009 13:32:30 Msec=750 True Az=117.285 Ze=15.495 Az status=0009 Ze status=0009 13:32:30 Check angles 13:32:30 SkyScan query 13:32:30 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.505<-12367 Statuses=0009 0009 13:32:30 Msec=1500 True Az=99.885 Ze=-5.505 Az status=0009 Ze status=0009 13:32:30 Check angles 13:32:30 SkyScan query 13:32:31 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.46<-13764 Statuses=0009 0009 13:32:31 Msec=2250 True Az=82.365 Ze=-26.46 Az status=0009 Ze status=0009 13:32:31 Check angles 13:32:31 SkyScan query 13:32:32 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.58<-14572 Statuses=0009 0008 13:32:32 Msec=3000 True Az=64.845 Ze=-38.58 Az status=0009 Ze status=0008 13:32:32 Check angles 13:32:32 SkyScan query 13:32:33 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.52<-14568 Statuses=0009 0008 13:32:33 Msec=3750 True Az=47.07 Ze=-38.52 Az status=0009 Ze status=0008 13:32:33 Check angles 13:32:33 SkyScan query 13:32:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:32:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:32:33 Message to Master queued w/err=0: serial=118037 error=0 13:32:38 Received message from Master: op=Filter serial=118038 13:32:38 Color wheel filter change from 0 to 0 13:32:38 FLIGetFilterPos err=0 currentPosition=0 13:32:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:38 Filter is already there-color wheel unchanged 13:32:39 Received message from Master: op=Shutter serial=118039 13:32:39 Shutter LASER close 13:32:39 Received message from Camera: op=State serial=118041 13:32:39 GetSingleValue result=40 Value=cccccccc 13:32:39 SkyScan query 13:32:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:32:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:39 Parameters OK 13:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:39 Set A/D data flow result=40 13:32:39 Set A/D channel type result=40 13:32:39 Set A/D encoding result=40 13:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:39 Set channel filter=0.000000e+000 result=40 13:32:39 Config A/D Result=40 13:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:39 Get A/D filter: -9.255963e+061 result=40 13:32:39 Get A/D value=-858993460 result=40 13:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:39 Parameters OK 13:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:39 Set A/D data flow result=40 13:32:39 Set A/D channel type result=40 13:32:39 Set A/D encoding result=40 13:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:39 Set channel filter=0.000000e+000 result=40 13:32:39 Config A/D Result=40 13:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:39 Get A/D filter: -9.255963e+061 result=40 13:32:39 Get A/D value=-858993460 result=40 13:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:39 Aux= 13:32:39 Message to Camera, serial 118041 queued 13:33:16 Received message from Master: op=PointingHead serial=118054 13:33:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:33:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:33:16 Point started: ret=0 13:33:16 point_skyscan result=0 13:33:17 Check angles 13:33:17 SkyScan query 13:33:18 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.88<-16592 Statuses=0009 0009 13:33:18 Msec=0 True Az=64.41 Ze=-68.88 Az status=0009 Ze status=0009 13:33:18 Check angles 13:33:18 SkyScan query 13:33:18 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.79<-17986 Statuses=0009 0009 13:33:18 Msec=750 True Az=81.9 Ze=-89.79 Az status=0009 Ze status=0009 13:33:19 Check angles 13:33:19 SkyScan query 13:33:19 SkyScan query done: ret=0 az=99.78<-6652 ze=-111.18<-19412 Statuses=0009 0009 13:33:19 Msec=1500 True Az=99.78 Ze=-111.18 Az status=0009 Ze status=0009 13:33:19 Check angles 13:33:19 SkyScan query 13:33:20 SkyScan query done: ret=0 az=117.3<-7820 ze=-132.12<-20808 Statuses=0009 0009 13:33:20 Msec=2250 True Az=117.3 Ze=-132.12 Az status=0009 Ze status=0009 13:33:20 Check angles 13:33:20 SkyScan query 13:33:21 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 13:33:21 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 13:33:21 Check angles 13:33:21 SkyScan query 13:33:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:33:21 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:33:21 Message to Master queued w/err=0: serial=118054 error=0 13:33:26 Received message from Master: op=Filter serial=118055 13:33:26 Color wheel filter change from 0 to 0 13:33:26 FLIGetFilterPos err=0 currentPosition=0 13:33:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:26 Filter is already there-color wheel unchanged 13:33:27 Received message from Master: op=Shutter serial=118056 13:33:27 Shutter LASER close 13:33:27 Received message from Camera: op=State serial=118058 13:33:27 GetSingleValue result=40 Value=cccccccc 13:33:27 SkyScan query 13:33:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:33:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:27 Parameters OK 13:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:27 Set A/D data flow result=40 13:33:27 Set A/D channel type result=40 13:33:27 Set A/D encoding result=40 13:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:27 Set channel filter=0.000000e+000 result=40 13:33:27 Config A/D Result=40 13:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:27 Get A/D filter: -9.255963e+061 result=40 13:33:27 Get A/D value=-858993460 result=40 13:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:27 Parameters OK 13:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:27 Set A/D data flow result=40 13:33:27 Set A/D channel type result=40 13:33:27 Set A/D encoding result=40 13:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:27 Set channel filter=0.000000e+000 result=40 13:33:27 Config A/D Result=40 13:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:27 Get A/D filter: -9.255963e+061 result=40 13:33:27 Get A/D value=-858993460 result=40 13:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:27 Aux= 13:33:27 Message to Camera, serial 118058 queued 13:34:04 Received message from Master: op=PointingHead serial=118071 13:34:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:34:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:34:04 Point started: ret=0 13:34:04 point_skyscan result=0 13:34:05 Check angles 13:34:05 SkyScan query 13:34:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 13:34:06 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 13:34:06 Check angles 13:34:06 SkyScan query 13:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:34:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:34:06 Message to Master queued w/err=0: serial=118071 error=0 13:34:11 Received message from Master: op=Filter serial=118072 13:34:11 Color wheel filter change from 0 to 0 13:34:11 FLIGetFilterPos err=0 currentPosition=0 13:34:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:11 Filter is already there-color wheel unchanged 13:34:12 Received message from Master: op=Shutter serial=118073 13:34:12 Shutter LASER open 13:34:12 Received message from Camera: op=State serial=118075 13:34:12 GetSingleValue result=40 Value=cccccccc 13:34:12 SkyScan query 13:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:34:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:12 Parameters OK 13:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:12 Set A/D data flow result=40 13:34:12 Set A/D channel type result=40 13:34:12 Set A/D encoding result=40 13:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:12 Set channel filter=0.000000e+000 result=40 13:34:12 Config A/D Result=40 13:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:12 Get A/D filter: -9.255963e+061 result=40 13:34:12 Get A/D value=-858993460 result=40 13:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:12 Parameters OK 13:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:12 Set A/D data flow result=40 13:34:12 Set A/D channel type result=40 13:34:12 Set A/D encoding result=40 13:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:12 Set channel filter=0.000000e+000 result=40 13:34:12 Config A/D Result=40 13:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:12 Get A/D filter: -9.255963e+061 result=40 13:34:12 Get A/D value=-858993460 result=40 13:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:12 Aux= 13:34:12 Message to Camera, serial 118075 queued 13:34:20 Received message from Master: op=Shutter serial=118084 13:34:20 Shutter LASER close 13:34:21 Received message from Master: op=PointingHead serial=118088 13:34:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:34:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:34:21 Point started: ret=0 13:34:21 point_skyscan result=0 13:34:22 Check angles 13:34:22 SkyScan query 13:34:22 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.235<-21549 Statuses=0009 0009 13:34:22 Msec=0 True Az=135.96 Ze=-143.235 Az status=0009 Ze status=0009 13:34:22 Check angles 13:34:22 SkyScan query 13:34:23 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.31<-20154 Statuses=0009 0009 13:34:23 Msec=750 True Az=153.42 Ze=-122.31 Az status=0009 Ze status=0009 13:34:23 Check angles 13:34:23 SkyScan query 13:34:24 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.4<-18760 Statuses=0009 0009 13:34:24 Msec=1500 True Az=170.955 Ze=-101.4 Az status=0009 Ze status=0009 13:34:24 Check angles 13:34:24 SkyScan query 13:34:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.415<-17361 Statuses=0008 0009 13:34:24 Msec=2250 True Az=176.01 Ze=-80.415 Az status=0008 Ze status=0009 13:34:25 Check angles 13:34:25 SkyScan query 13:34:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.46<-15964 Statuses=0008 0009 13:34:25 Msec=3000 True Az=176.01 Ze=-59.46 Az status=0008 Ze status=0009 13:34:25 Check angles 13:34:25 SkyScan query 13:34:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:34:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:34:26 Message to Master queued w/err=0: serial=118088 error=0 13:34:31 Received message from Master: op=Filter serial=118089 13:34:31 Color wheel filter change from 0 to 0 13:34:31 FLIGetFilterPos err=0 currentPosition=0 13:34:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:31 Filter is already there-color wheel unchanged 13:34:31 Received message from Master: op=Shutter serial=118090 13:34:31 Shutter LASER close 13:34:31 Received message from Camera: op=State serial=118092 13:34:31 GetSingleValue result=40 Value=cccccccc 13:34:31 SkyScan query 13:34:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:34:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:32 Parameters OK 13:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:32 Set A/D data flow result=40 13:34:32 Set A/D channel type result=40 13:34:32 Set A/D encoding result=40 13:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:32 Set channel filter=0.000000e+000 result=40 13:34:32 Config A/D Result=40 13:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:32 Get A/D filter: -9.255963e+061 result=40 13:34:32 Get A/D value=-858993460 result=40 13:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:32 Parameters OK 13:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:32 Set A/D data flow result=40 13:34:32 Set A/D channel type result=40 13:34:32 Set A/D encoding result=40 13:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:32 Set channel filter=0.000000e+000 result=40 13:34:32 Config A/D Result=40 13:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:32 Get A/D filter: -9.255963e+061 result=40 13:34:32 Get A/D value=-858993460 result=40 13:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:32 Aux= 13:34:32 Message to Camera, serial 118092 queued 13:35:09 Received message from Master: op=PointingHead serial=118105 13:35:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:35:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:35:09 Point started: ret=0 13:35:09 point_skyscan result=0 13:35:10 Check angles 13:35:10 SkyScan query 13:35:10 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.065<-13471 Statuses=0009 0009 13:35:10 Msec=0 True Az=153.225 Ze=-22.065 Az status=0009 Ze status=0009 13:35:11 Check angles 13:35:11 SkyScan query 13:35:11 SkyScan query done: ret=0 az=135.825<-9055 ze=-1.08<-12072 Statuses=0009 0009 13:35:11 Msec=750 True Az=135.825 Ze=-1.08 Az status=0009 Ze status=0009 13:35:11 Check angles 13:35:11 SkyScan query 13:35:12 SkyScan query done: ret=0 az=118.29<-7886 ze=19.86<-10676 Statuses=0009 0009 13:35:12 Msec=1500 True Az=118.29 Ze=19.86 Az status=0009 Ze status=0009 13:35:12 Check angles 13:35:12 SkyScan query 13:35:13 SkyScan query done: ret=0 az=100.785<-6719 ze=40.845<-9277 Statuses=0009 0009 13:35:13 Msec=2250 True Az=100.785 Ze=40.845 Az status=0009 Ze status=0009 13:35:13 Check angles 13:35:13 SkyScan query 13:35:13 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:35:13 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:35:14 Check angles 13:35:14 SkyScan query 13:35:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:35:14 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:35:14 Message to Master queued w/err=0: serial=118105 error=0 13:35:19 Received message from Master: op=Filter serial=118106 13:35:19 Color wheel filter change from 0 to 0 13:35:19 FLIGetFilterPos err=0 currentPosition=0 13:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:19 Filter is already there-color wheel unchanged 13:35:19 Received message from Master: op=Shutter serial=118107 13:35:19 Shutter LASER close 13:35:19 Received message from Camera: op=State serial=118109 13:35:19 GetSingleValue result=40 Value=cccccccc 13:35:19 SkyScan query 13:35:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:20 Parameters OK 13:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:20 Set A/D data flow result=40 13:35:20 Set A/D channel type result=40 13:35:20 Set A/D encoding result=40 13:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:20 Set channel filter=0.000000e+000 result=40 13:35:20 Config A/D Result=40 13:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:20 Get A/D filter: -9.255963e+061 result=40 13:35:20 Get A/D value=-858993460 result=40 13:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:20 Parameters OK 13:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:20 Set A/D data flow result=40 13:35:20 Set A/D channel type result=40 13:35:20 Set A/D encoding result=40 13:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:20 Set channel filter=0.000000e+000 result=40 13:35:20 Config A/D Result=40 13:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:20 Get A/D filter: -9.255963e+061 result=40 13:35:20 Get A/D value=-858993460 result=40 13:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:20 Aux= 13:35:20 Message to Camera, serial 118109 queued [UTC 2018-12-13 13:35:52] 13:35:57 Received message from Master: op=PointingHead serial=118122 13:35:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:35:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:35:57 Point started: ret=0 13:35:57 point_skyscan result=0 13:35:58 Check angles 13:35:58 SkyScan query 13:35:58 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 13:35:58 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 13:35:59 Check angles 13:35:59 SkyScan query 13:35:59 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 13:35:59 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 13:35:59 Check angles 13:35:59 SkyScan query 13:36:00 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 13:36:00 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 13:36:00 Check angles 13:36:00 SkyScan query 13:36:01 SkyScan query done: ret=0 az=161.64<-10776 ze=38.505<-9433 Statuses=0009 0008 13:36:01 Msec=2250 True Az=161.64 Ze=38.505 Az status=0009 Ze status=0008 13:36:01 Check angles 13:36:01 SkyScan query 13:36:01 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:36:01 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:36:02 Check angles 13:36:02 SkyScan query 13:36:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:36:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:36:02 Message to Master queued w/err=0: serial=118122 error=0 13:36:07 Received message from Master: op=Filter serial=118123 13:36:07 Color wheel filter change from 0 to 0 13:36:07 FLIGetFilterPos err=0 currentPosition=0 13:36:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:07 Filter is already there-color wheel unchanged 13:36:07 Received message from Master: op=Shutter serial=118124 13:36:07 Shutter LASER close 13:36:07 Received message from Camera: op=State serial=118126 13:36:07 GetSingleValue result=40 Value=cccccccc 13:36:07 SkyScan query 13:36:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:36:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:08 Parameters OK 13:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:08 Set A/D data flow result=40 13:36:08 Set A/D channel type result=40 13:36:08 Set A/D encoding result=40 13:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:08 Set channel filter=0.000000e+000 result=40 13:36:08 Config A/D Result=40 13:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:08 Get A/D filter: -9.255963e+061 result=40 13:36:08 Get A/D value=-858993460 result=40 13:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:08 Parameters OK 13:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:08 Set A/D data flow result=40 13:36:08 Set A/D channel type result=40 13:36:08 Set A/D encoding result=40 13:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:08 Set channel filter=0.000000e+000 result=40 13:36:08 Config A/D Result=40 13:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:08 Get A/D filter: -9.255963e+061 result=40 13:36:08 Get A/D value=-858993460 result=40 13:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:08 Aux= 13:36:08 Message to Camera, serial 118126 queued 13:36:45 Received message from Master: op=PointingHead serial=118139 13:36:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:36:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:36:45 Point started: ret=0 13:36:45 point_skyscan result=0 13:36:46 Check angles 13:36:46 SkyScan query 13:36:47 SkyScan query done: ret=0 az=152.955<-10197 ze=8.7<-11420 Statuses=0009 0009 13:36:47 Msec=0 True Az=152.955 Ze=8.7 Az status=0009 Ze status=0009 13:36:47 Check angles 13:36:47 SkyScan query 13:36:47 SkyScan query done: ret=0 az=135.585<-9039 ze=-12.27<-12818 Statuses=0009 0009 13:36:47 Msec=750 True Az=135.585 Ze=-12.27 Az status=0009 Ze status=0009 13:36:47 Check angles 13:36:47 SkyScan query 13:36:48 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.195<-14213 Statuses=0009 0009 13:36:48 Msec=1500 True Az=118.08 Ze=-33.195 Az status=0009 Ze status=0009 13:36:48 Check angles 13:36:48 SkyScan query 13:36:49 SkyScan query done: ret=0 az=100.335<-6689 ze=-51.555<-15437 Statuses=0009 0009 13:36:49 Msec=2250 True Az=100.335 Ze=-51.555 Az status=0009 Ze status=0009 13:36:49 Check angles 13:36:49 SkyScan query 13:36:50 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:36:50 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:36:50 Check angles 13:36:50 SkyScan query 13:36:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:36:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:36:50 Message to Master queued w/err=0: serial=118139 error=0 13:36:55 Received message from Master: op=Filter serial=118140 13:36:55 Color wheel filter change from 0 to 0 13:36:55 FLIGetFilterPos err=0 currentPosition=0 13:36:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:55 Filter is already there-color wheel unchanged 13:36:55 Received message from Master: op=Shutter serial=118141 13:36:55 Shutter LASER close 13:36:56 Received message from Camera: op=State serial=118143 13:36:56 GetSingleValue result=40 Value=cccccccc 13:36:56 SkyScan query 13:36:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:36:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:56 Parameters OK 13:36:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:56 Set A/D data flow result=40 13:36:56 Set A/D channel type result=40 13:36:56 Set A/D encoding result=40 13:36:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:56 Set channel filter=0.000000e+000 result=40 13:36:56 Config A/D Result=40 13:36:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:56 Get A/D filter: -9.255963e+061 result=40 13:36:56 Get A/D value=-858993460 result=40 13:36:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:56 Parameters OK 13:36:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:56 Set A/D data flow result=40 13:36:56 Set A/D channel type result=40 13:36:56 Set A/D encoding result=40 13:36:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:56 Set channel filter=0.000000e+000 result=40 13:36:56 Config A/D Result=40 13:36:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:56 Get A/D filter: -9.255963e+061 result=40 13:36:56 Get A/D value=-858993460 result=40 13:36:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:56 Aux= 13:36:56 Message to Camera, serial 118143 queued 13:37:33 Received message from Master: op=PointingHead serial=118156 13:37:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:37:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:37:33 Point started: ret=0 13:37:33 point_skyscan result=0 13:37:34 Check angles 13:37:34 SkyScan query 13:37:35 SkyScan query done: ret=0 az=108.93<-7262 ze=-80.97<-17398 Statuses=0009 0009 13:37:35 Msec=0 True Az=108.93 Ze=-80.97 Az status=0009 Ze status=0009 13:37:35 Check angles 13:37:35 SkyScan query 13:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 13:37:35 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 13:37:36 Check angles 13:37:36 SkyScan query 13:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 13:37:36 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 13:37:36 Check angles 13:37:36 SkyScan query 13:37:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 13:37:37 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 13:37:37 Check angles 13:37:37 SkyScan query 13:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 13:37:38 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 13:37:38 Check angles 13:37:38 SkyScan query 13:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:37:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:37:38 Message to Master queued w/err=0: serial=118156 error=0 13:37:43 Received message from Master: op=Filter serial=118157 13:37:43 Color wheel filter change from 0 to 0 13:37:43 FLIGetFilterPos err=0 currentPosition=0 13:37:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:43 Filter is already there-color wheel unchanged 13:37:44 Received message from Master: op=Shutter serial=118158 13:37:44 Shutter LASER open 13:37:44 Received message from Camera: op=State serial=118160 13:37:44 GetSingleValue result=40 Value=cccccccc 13:37:44 SkyScan query 13:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:37:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:44 Parameters OK 13:37:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:44 Set A/D data flow result=40 13:37:44 Set A/D channel type result=40 13:37:44 Set A/D encoding result=40 13:37:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:44 Set channel filter=0.000000e+000 result=40 13:37:44 Config A/D Result=40 13:37:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:44 Get A/D filter: -9.255963e+061 result=40 13:37:44 Get A/D value=-858993460 result=40 13:37:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:44 Parameters OK 13:37:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:44 Set A/D data flow result=40 13:37:44 Set A/D channel type result=40 13:37:44 Set A/D encoding result=40 13:37:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:44 Set channel filter=0.000000e+000 result=40 13:37:44 Config A/D Result=40 13:37:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:44 Get A/D filter: -9.255963e+061 result=40 13:37:44 Get A/D value=-858993460 result=40 13:37:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:44 Aux= 13:37:44 Message to Camera, serial 118160 queued 13:37:53 Received message from Master: op=Shutter serial=118170 13:37:53 Shutter LASER close 13:37:53 Received message from Master: op=PointingHead serial=118174 13:37:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:37:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:37:54 Point started: ret=0 13:37:54 point_skyscan result=0 13:37:54 Check angles 13:37:54 SkyScan query 13:37:55 SkyScan query done: ret=0 az=89.595<-5973 ze=156.795<-1547 Statuses=0009 0009 13:37:55 Msec=0 True Az=89.595 Ze=156.795 Az status=0009 Ze status=0009 13:37:55 Check angles 13:37:55 SkyScan query 13:37:56 SkyScan query done: ret=0 az=71.97<-4798 ze=135.84<-2944 Statuses=0009 0009 13:37:56 Msec=750 True Az=71.97 Ze=135.84 Az status=0009 Ze status=0009 13:37:56 Check angles 13:37:56 SkyScan query 13:37:56 SkyScan query done: ret=0 az=54.765<-3651 ze=114.885<-4341 Statuses=0009 0009 13:37:56 Msec=1500 True Az=54.765 Ze=114.885 Az status=0009 Ze status=0009 13:37:57 Check angles 13:37:57 SkyScan query 13:37:57 SkyScan query done: ret=0 az=40.92<-2728 ze=93.93<-5738 Statuses=0009 0009 13:37:57 Msec=2250 True Az=40.92 Ze=93.93 Az status=0009 Ze status=0009 13:37:57 Check angles 13:37:57 SkyScan query 13:37:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 13:37:58 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 13:37:58 Check angles 13:37:58 SkyScan query 13:37:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 13:37:59 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 13:37:59 Check angles 13:37:59 SkyScan query 13:37:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:37:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:37:59 Message to Master queued w/err=0: serial=118174 error=0 13:38:04 Received message from Master: op=Filter serial=118175 13:38:04 Color wheel filter change from 0 to 0 13:38:04 FLIGetFilterPos err=0 currentPosition=0 13:38:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:04 Filter is already there-color wheel unchanged 13:38:05 Received message from Master: op=Shutter serial=118176 13:38:05 Shutter LASER close 13:38:05 Received message from Camera: op=State serial=118178 13:38:05 GetSingleValue result=40 Value=cccccccc 13:38:05 SkyScan query 13:38:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:38:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:05 Parameters OK 13:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:05 Set A/D data flow result=40 13:38:05 Set A/D channel type result=40 13:38:05 Set A/D encoding result=40 13:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:05 Set channel filter=0.000000e+000 result=40 13:38:05 Config A/D Result=40 13:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:05 Get A/D filter: -9.255963e+061 result=40 13:38:05 Get A/D value=-858993460 result=40 13:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:05 Parameters OK 13:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:05 Set A/D data flow result=40 13:38:05 Set A/D channel type result=40 13:38:05 Set A/D encoding result=40 13:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:05 Set channel filter=0.000000e+000 result=40 13:38:05 Config A/D Result=40 13:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:05 Get A/D filter: -9.255963e+061 result=40 13:38:05 Get A/D value=-858993460 result=40 13:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:05 Aux= 13:38:05 Message to Camera, serial 118178 queued 13:38:42 Received message from Master: op=PointingHead serial=118191 13:38:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:38:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:38:42 Point started: ret=0 13:38:42 point_skyscan result=0 13:38:43 Check angles 13:38:43 SkyScan query 13:38:44 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 13:38:44 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 13:38:44 Check angles 13:38:44 SkyScan query 13:38:45 SkyScan query done: ret=0 az=81.54<-5436 ze=66.495<-7567 Statuses=0009 0008 13:38:45 Msec=750 True Az=81.54 Ze=66.495 Az status=0009 Ze status=0008 13:38:45 Check angles 13:38:45 SkyScan query 13:38:45 SkyScan query done: ret=0 az=98.985<-6599 ze=66.495<-7567 Statuses=0009 0008 13:38:45 Msec=1500 True Az=98.985 Ze=66.495 Az status=0009 Ze status=0008 13:38:45 Check angles 13:38:45 SkyScan query 13:38:46 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 13:38:46 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 13:38:46 Check angles 13:38:46 SkyScan query 13:38:47 SkyScan query done: ret=0 az=134.07<-8938 ze=66.495<-7567 Statuses=0009 0008 13:38:47 Msec=3000 True Az=134.07 Ze=66.495 Az status=0009 Ze status=0008 13:38:47 Check angles 13:38:47 SkyScan query 13:38:48 SkyScan query done: ret=0 az=151.275<-10085 ze=66.495<-7567 Statuses=0009 0008 13:38:48 Msec=3750 True Az=151.275 Ze=66.495 Az status=0009 Ze status=0008 13:38:48 Check angles 13:38:48 SkyScan query 13:38:48 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:38:48 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:38:48 Message to Master queued w/err=0: serial=118191 error=0 13:38:53 Received message from Master: op=Filter serial=118192 13:38:53 Color wheel filter change from 0 to 0 13:38:53 FLIGetFilterPos err=0 currentPosition=0 13:38:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:53 Filter is already there-color wheel unchanged 13:38:54 Received message from Master: op=Shutter serial=118193 13:38:54 Shutter LASER close 13:38:54 Received message from Camera: op=State serial=118195 13:38:54 GetSingleValue result=40 Value=cccccccc 13:38:54 SkyScan query 13:38:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:38:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:54 Parameters OK 13:38:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:54 Set A/D data flow result=40 13:38:54 Set A/D channel type result=40 13:38:54 Set A/D encoding result=40 13:38:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:54 Set channel filter=0.000000e+000 result=40 13:38:54 Config A/D Result=40 13:38:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:54 Get A/D filter: -9.255963e+061 result=40 13:38:54 Get A/D value=-858993460 result=40 13:38:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:54 Parameters OK 13:38:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:54 Set A/D data flow result=40 13:38:54 Set A/D channel type result=40 13:38:54 Set A/D encoding result=40 13:38:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:54 Set channel filter=0.000000e+000 result=40 13:38:54 Config A/D Result=40 13:38:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:54 Get A/D filter: -9.255963e+061 result=40 13:38:54 Get A/D value=-858993460 result=40 13:38:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:54 Aux= 13:38:54 Message to Camera, serial 118195 queued 13:39:31 Received message from Master: op=PointingHead serial=118208 13:39:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:39:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:39:31 Point started: ret=0 13:39:31 point_skyscan result=0 13:39:32 Check angles 13:39:32 SkyScan query 13:39:33 SkyScan query done: ret=0 az=134.73<-8982 ze=36.615<-9559 Statuses=0009 0009 13:39:33 Msec=0 True Az=134.73 Ze=36.615 Az status=0009 Ze status=0009 13:39:33 Check angles 13:39:33 SkyScan query 13:39:33 SkyScan query done: ret=0 az=116.865<-7791 ze=15.285<-10981 Statuses=0009 0009 13:39:33 Msec=750 True Az=116.865 Ze=15.285 Az status=0009 Ze status=0009 13:39:34 Check angles 13:39:34 SkyScan query 13:39:34 SkyScan query done: ret=0 az=99.06<-6604 ze=-6.165<-12411 Statuses=0009 0009 13:39:34 Msec=1500 True Az=99.06 Ze=-6.165 Az status=0009 Ze status=0009 13:39:34 Check angles 13:39:34 SkyScan query 13:39:35 SkyScan query done: ret=0 az=81.66<-5444 ze=-27.135<-13809 Statuses=0009 0009 13:39:35 Msec=2250 True Az=81.66 Ze=-27.135 Az status=0009 Ze status=0009 13:39:35 Check angles 13:39:35 SkyScan query 13:39:36 SkyScan query done: ret=0 az=64.155<-4277 ze=-38.565<-14571 Statuses=0009 0008 13:39:36 Msec=3000 True Az=64.155 Ze=-38.565 Az status=0009 Ze status=0008 13:39:36 Check angles 13:39:36 SkyScan query 13:39:36 SkyScan query done: ret=0 az=46.71<-3114 ze=-38.52<-14568 Statuses=0009 0008 13:39:36 Msec=3750 True Az=46.71 Ze=-38.52 Az status=0009 Ze status=0008 13:39:37 Check angles 13:39:37 SkyScan query 13:39:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:39:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:39:37 Message to Master queued w/err=0: serial=118208 error=0 13:39:42 Received message from Master: op=Filter serial=118209 13:39:42 Color wheel filter change from 0 to 0 13:39:42 FLIGetFilterPos err=0 currentPosition=0 13:39:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:42 Filter is already there-color wheel unchanged 13:39:42 Received message from Master: op=Shutter serial=118210 13:39:42 Shutter LASER close 13:39:42 Received message from Camera: op=State serial=118212 13:39:42 GetSingleValue result=40 Value=cccccccc 13:39:42 SkyScan query 13:39:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:39:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:43 Parameters OK 13:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:43 Set A/D data flow result=40 13:39:43 Set A/D channel type result=40 13:39:43 Set A/D encoding result=40 13:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:43 Set channel filter=0.000000e+000 result=40 13:39:43 Config A/D Result=40 13:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:43 Get A/D filter: -9.255963e+061 result=40 13:39:43 Get A/D value=-858993460 result=40 13:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:43 Parameters OK 13:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:43 Set A/D data flow result=40 13:39:43 Set A/D channel type result=40 13:39:43 Set A/D encoding result=40 13:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:43 Set channel filter=0.000000e+000 result=40 13:39:43 Config A/D Result=40 13:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:43 Get A/D filter: -9.255963e+061 result=40 13:39:43 Get A/D value=-858993460 result=40 13:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:43 Aux= 13:39:43 Message to Camera, serial 118212 queued 13:40:20 Received message from Master: op=PointingHead serial=118225 13:40:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:40:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:40:20 Point started: ret=0 13:40:20 point_skyscan result=0 13:40:21 Check angles 13:40:21 SkyScan query 13:40:22 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.865<-16591 Statuses=0009 0009 13:40:22 Msec=0 True Az=64.41 Ze=-68.865 Az status=0009 Ze status=0009 13:40:22 Check angles 13:40:22 SkyScan query 13:40:22 SkyScan query done: ret=0 az=82.335<-5489 ze=-90.255<-18017 Statuses=0009 0009 13:40:22 Msec=750 True Az=82.335 Ze=-90.255 Az status=0009 Ze status=0009 13:40:22 Check angles 13:40:22 SkyScan query 13:40:23 SkyScan query done: ret=0 az=99.795<-6653 ze=-111.21<-19414 Statuses=0009 0009 13:40:23 Msec=1500 True Az=99.795 Ze=-111.21 Az status=0009 Ze status=0009 13:40:23 Check angles 13:40:23 SkyScan query 13:40:24 SkyScan query done: ret=0 az=117.27<-7818 ze=-132.135<-20809 Statuses=0009 0009 13:40:24 Msec=2250 True Az=117.27 Ze=-132.135 Az status=0009 Ze status=0009 13:40:24 Check angles 13:40:24 SkyScan query 13:40:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 13:40:25 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 13:40:25 Check angles 13:40:25 SkyScan query 13:40:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:40:25 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:40:25 Message to Master queued w/err=0: serial=118225 error=0 13:40:30 Received message from Master: op=Filter serial=118226 13:40:30 Color wheel filter change from 0 to 0 13:40:30 FLIGetFilterPos err=0 currentPosition=0 13:40:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:30 Filter is already there-color wheel unchanged 13:40:30 Received message from Master: op=Shutter serial=118227 13:40:30 Shutter LASER close 13:40:31 Received message from Camera: op=State serial=118229 13:40:31 GetSingleValue result=40 Value=cccccccc 13:40:31 SkyScan query 13:40:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:40:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:31 Parameters OK 13:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:31 Set A/D data flow result=40 13:40:31 Set A/D channel type result=40 13:40:31 Set A/D encoding result=40 13:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:31 Set channel filter=0.000000e+000 result=40 13:40:31 Config A/D Result=40 13:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:31 Get A/D filter: -9.255963e+061 result=40 13:40:31 Get A/D value=-858993460 result=40 13:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:31 Parameters OK 13:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:31 Set A/D data flow result=40 13:40:31 Set A/D channel type result=40 13:40:31 Set A/D encoding result=40 13:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:31 Set channel filter=0.000000e+000 result=40 13:40:31 Config A/D Result=40 13:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:31 Get A/D filter: -9.255963e+061 result=40 13:40:31 Get A/D value=-858993460 result=40 13:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:31 Aux= 13:40:31 Message to Camera, serial 118229 queued 13:41:08 Received message from Master: op=PointingHead serial=118242 13:41:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:41:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:41:08 Point started: ret=0 13:41:08 point_skyscan result=0 13:41:09 Check angles 13:41:09 SkyScan query 13:41:10 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 13:41:10 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 13:41:10 Check angles 13:41:10 SkyScan query 13:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:41:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:41:10 Message to Master queued w/err=0: serial=118242 error=0 13:41:15 Received message from Master: op=Filter serial=118243 13:41:15 Color wheel filter change from 0 to 0 13:41:15 FLIGetFilterPos err=0 currentPosition=0 13:41:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:15 Filter is already there-color wheel unchanged 13:41:16 Received message from Master: op=Shutter serial=118244 13:41:16 Shutter LASER open 13:41:16 Received message from Camera: op=State serial=118246 13:41:16 GetSingleValue result=40 Value=cccccccc 13:41:16 SkyScan query 13:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:41:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:16 Parameters OK 13:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:16 Set A/D data flow result=40 13:41:16 Set A/D channel type result=40 13:41:16 Set A/D encoding result=40 13:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:16 Set channel filter=0.000000e+000 result=40 13:41:16 Config A/D Result=40 13:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:16 Get A/D filter: -9.255963e+061 result=40 13:41:16 Get A/D value=-858993460 result=40 13:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:16 Parameters OK 13:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:16 Set A/D data flow result=40 13:41:16 Set A/D channel type result=40 13:41:16 Set A/D encoding result=40 13:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:16 Set channel filter=0.000000e+000 result=40 13:41:16 Config A/D Result=40 13:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:16 Get A/D filter: -9.255963e+061 result=40 13:41:16 Get A/D value=-858993460 result=40 13:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:16 Aux= 13:41:16 Message to Camera, serial 118246 queued 13:41:25 Received message from Master: op=Shutter serial=118256 13:41:25 Shutter LASER close 13:41:25 Received message from Master: op=PointingHead serial=118260 13:41:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:41:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:41:26 Point started: ret=0 13:41:26 point_skyscan result=0 13:41:26 Check angles 13:41:26 SkyScan query 13:41:27 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.505<-21567 Statuses=0009 0009 13:41:27 Msec=0 True Az=135.75 Ze=-143.505 Az status=0009 Ze status=0009 13:41:27 Check angles 13:41:27 SkyScan query 13:41:28 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.535<-20169 Statuses=0009 0009 13:41:28 Msec=750 True Az=153.225 Ze=-122.535 Az status=0009 Ze status=0009 13:41:28 Check angles 13:41:28 SkyScan query 13:41:28 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.64<-18776 Statuses=0009 0009 13:41:28 Msec=1500 True Az=170.775 Ze=-101.64 Az status=0009 Ze status=0009 13:41:29 Check angles 13:41:29 SkyScan query 13:41:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.61<-17374 Statuses=0008 0009 13:41:29 Msec=2250 True Az=176.01 Ze=-80.61 Az status=0008 Ze status=0009 13:41:29 Check angles 13:41:29 SkyScan query 13:41:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.7<-15980 Statuses=0008 0009 13:41:30 Msec=3000 True Az=176.01 Ze=-59.7 Az status=0008 Ze status=0009 13:41:30 Check angles 13:41:30 SkyScan query 13:41:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 13:41:31 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 13:41:31 Message to Master queued w/err=0: serial=118260 error=0 13:41:36 Received message from Master: op=Filter serial=118261 13:41:36 Color wheel filter change from 0 to 0 13:41:36 FLIGetFilterPos err=0 currentPosition=0 13:41:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:36 Filter is already there-color wheel unchanged 13:41:36 Received message from Master: op=Shutter serial=118262 13:41:36 Shutter LASER close 13:41:36 Received message from Camera: op=State serial=118264 13:41:36 GetSingleValue result=40 Value=cccccccc 13:41:36 SkyScan query 13:41:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:41:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:37 Parameters OK 13:41:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:37 Set A/D data flow result=40 13:41:37 Set A/D channel type result=40 13:41:37 Set A/D encoding result=40 13:41:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:37 Set channel filter=0.000000e+000 result=40 13:41:37 Config A/D Result=40 13:41:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:37 Get A/D filter: -9.255963e+061 result=40 13:41:37 Get A/D value=-858993460 result=40 13:41:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:37 Parameters OK 13:41:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:37 Set A/D data flow result=40 13:41:37 Set A/D channel type result=40 13:41:37 Set A/D encoding result=40 13:41:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:37 Set channel filter=0.000000e+000 result=40 13:41:37 Config A/D Result=40 13:41:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:37 Get A/D filter: -9.255963e+061 result=40 13:41:37 Get A/D value=-858993460 result=40 13:41:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:37 Aux= 13:41:37 Message to Camera, serial 118264 queued 13:42:13 Received message from Master: op=PointingHead serial=118277 13:42:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:42:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:42:14 Point started: ret=0 13:42:14 point_skyscan result=0 13:42:15 Check angles 13:42:15 SkyScan query 13:42:15 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.18<-13412 Statuses=0009 0009 13:42:15 Msec=0 True Az=152.67 Ze=-21.18 Az status=0009 Ze status=0009 13:42:15 Check angles 13:42:15 SkyScan query 13:42:16 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.225<-12015 Statuses=0009 0009 13:42:16 Msec=750 True Az=135.09 Ze=-0.225 Az status=0009 Ze status=0009 13:42:16 Check angles 13:42:16 SkyScan query 13:42:17 SkyScan query done: ret=0 az=117.27<-7818 ze=21.18<-10588 Statuses=0009 0009 13:42:17 Msec=1500 True Az=117.27 Ze=21.18 Az status=0009 Ze status=0009 13:42:17 Check angles 13:42:17 SkyScan query 13:42:17 SkyScan query done: ret=0 az=99.825<-6655 ze=42.09<-9194 Statuses=0009 0009 13:42:17 Msec=2250 True Az=99.825 Ze=42.09 Az status=0009 Ze status=0009 13:42:18 Check angles 13:42:18 SkyScan query 13:42:18 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:42:18 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:42:18 Check angles 13:42:18 SkyScan query 13:42:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:42:19 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:42:19 Message to Master queued w/err=0: serial=118277 error=0 13:42:24 Received message from Master: op=Filter serial=118278 13:42:24 Color wheel filter change from 0 to 0 13:42:24 FLIGetFilterPos err=0 currentPosition=0 13:42:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:24 Filter is already there-color wheel unchanged 13:42:24 Received message from Master: op=Shutter serial=118279 13:42:24 Shutter LASER close 13:42:24 Received message from Camera: op=State serial=118281 13:42:24 GetSingleValue result=40 Value=cccccccc 13:42:24 SkyScan query 13:42:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:42:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:25 Parameters OK 13:42:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:25 Set A/D data flow result=40 13:42:25 Set A/D channel type result=40 13:42:25 Set A/D encoding result=40 13:42:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:25 Set channel filter=0.000000e+000 result=40 13:42:25 Config A/D Result=40 13:42:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:25 Get A/D filter: -9.255963e+061 result=40 13:42:25 Get A/D value=-858993460 result=40 13:42:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:25 Parameters OK 13:42:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:25 Set A/D data flow result=40 13:42:25 Set A/D channel type result=40 13:42:25 Set A/D encoding result=40 13:42:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:25 Set channel filter=0.000000e+000 result=40 13:42:25 Config A/D Result=40 13:42:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:25 Get A/D filter: -9.255963e+061 result=40 13:42:25 Get A/D value=-858993460 result=40 13:42:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:25 Aux= 13:42:25 Message to Camera, serial 118281 queued 13:43:02 Received message from Master: op=PointingHead serial=118294 13:43:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:43:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:43:02 Point started: ret=0 13:43:02 point_skyscan result=0 13:43:03 Check angles 13:43:03 SkyScan query 13:43:03 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 13:43:03 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 13:43:03 Check angles 13:43:03 SkyScan query 13:43:04 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 13:43:04 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 13:43:04 Check angles 13:43:04 SkyScan query 13:43:05 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 13:43:05 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 13:43:05 Check angles 13:43:05 SkyScan query 13:43:05 SkyScan query done: ret=0 az=161.25<-10750 ze=38.505<-9433 Statuses=0009 0008 13:43:05 Msec=2250 True Az=161.25 Ze=38.505 Az status=0009 Ze status=0008 13:43:06 Check angles 13:43:06 SkyScan query 13:43:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:43:06 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:43:06 Check angles 13:43:06 SkyScan query 13:43:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:43:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:43:07 Message to Master queued w/err=0: serial=118294 error=0 13:43:12 Received message from Master: op=Filter serial=118295 13:43:12 Color wheel filter change from 0 to 0 13:43:12 FLIGetFilterPos err=0 currentPosition=0 13:43:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:12 Filter is already there-color wheel unchanged 13:43:12 Received message from Master: op=Shutter serial=118296 13:43:12 Shutter LASER close 13:43:12 Received message from Camera: op=State serial=118298 13:43:12 GetSingleValue result=40 Value=cccccccc 13:43:12 SkyScan query 13:43:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:43:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:13 Parameters OK 13:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:13 Set A/D data flow result=40 13:43:13 Set A/D channel type result=40 13:43:13 Set A/D encoding result=40 13:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:13 Set channel filter=0.000000e+000 result=40 13:43:13 Config A/D Result=40 13:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:13 Get A/D filter: -9.255963e+061 result=40 13:43:13 Get A/D value=-858993460 result=40 13:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:13 Parameters OK 13:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:13 Set A/D data flow result=40 13:43:13 Set A/D channel type result=40 13:43:13 Set A/D encoding result=40 13:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:13 Set channel filter=0.000000e+000 result=40 13:43:13 Config A/D Result=40 13:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:13 Get A/D filter: -9.255963e+061 result=40 13:43:13 Get A/D value=-858993460 result=40 13:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:13 Aux= 13:43:13 Message to Camera, serial 118298 queued 13:43:50 Received message from Master: op=PointingHead serial=118311 13:43:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:43:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:43:50 Point started: ret=0 13:43:50 point_skyscan result=0 13:43:51 Check angles 13:43:51 SkyScan query 13:43:51 SkyScan query done: ret=0 az=153.225<-10215 ze=8.94<-11404 Statuses=0009 0009 13:43:51 Msec=0 True Az=153.225 Ze=8.94 Az status=0009 Ze status=0009 13:43:52 Check angles 13:43:52 SkyScan query 13:43:52 SkyScan query done: ret=0 az=135.81<-9054 ze=-12.045<-12803 Statuses=0009 0009 13:43:52 Msec=750 True Az=135.81 Ze=-12.045 Az status=0009 Ze status=0009 13:43:52 Check angles 13:43:52 SkyScan query 13:43:53 SkyScan query done: ret=0 az=118.23<-7882 ze=-32.955<-14197 Statuses=0009 0009 13:43:53 Msec=1500 True Az=118.23 Ze=-32.955 Az status=0009 Ze status=0009 13:43:53 Check angles 13:43:53 SkyScan query 13:43:54 SkyScan query done: ret=0 az=100.68<-6712 ze=-51.51<-15434 Statuses=0009 0009 13:43:54 Msec=2250 True Az=100.68 Ze=-51.51 Az status=0009 Ze status=0009 13:43:54 Check angles 13:43:54 SkyScan query 13:43:54 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:43:54 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:43:55 Check angles 13:43:55 SkyScan query 13:43:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:43:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:43:55 Message to Master queued w/err=0: serial=118311 error=0 13:44:00 Received message from Master: op=Filter serial=118312 13:44:00 Color wheel filter change from 0 to 0 13:44:00 FLIGetFilterPos err=0 currentPosition=0 13:44:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:00 Filter is already there-color wheel unchanged 13:44:00 Received message from Master: op=Shutter serial=118313 13:44:00 Shutter LASER close 13:44:00 Received message from Camera: op=State serial=118315 13:44:00 GetSingleValue result=40 Value=cccccccc 13:44:00 SkyScan query 13:44:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:44:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:01 Parameters OK 13:44:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:01 Set A/D data flow result=40 13:44:01 Set A/D channel type result=40 13:44:01 Set A/D encoding result=40 13:44:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:01 Set channel filter=0.000000e+000 result=40 13:44:01 Config A/D Result=40 13:44:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:01 Get A/D filter: -9.255963e+061 result=40 13:44:01 Get A/D value=-858993460 result=40 13:44:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:01 Parameters OK 13:44:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:01 Set A/D data flow result=40 13:44:01 Set A/D channel type result=40 13:44:01 Set A/D encoding result=40 13:44:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:01 Set channel filter=0.000000e+000 result=40 13:44:01 Config A/D Result=40 13:44:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:01 Get A/D filter: -9.255963e+061 result=40 13:44:01 Get A/D value=-858993460 result=40 13:44:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:01 Aux= 13:44:01 Message to Camera, serial 118315 queued 13:44:38 Received message from Master: op=PointingHead serial=118328 13:44:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:44:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:44:38 Point started: ret=0 13:44:38 point_skyscan result=0 13:44:39 Check angles 13:44:39 SkyScan query 13:44:39 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.66<-17444 Statuses=0009 0009 13:44:39 Msec=0 True Az=109.365 Ze=-81.66 Az status=0009 Ze status=0009 13:44:40 Check angles 13:44:40 SkyScan query 13:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.035<-18869 Statuses=0008 0009 13:44:40 Msec=750 True Az=112.995 Ze=-103.035 Az status=0008 Ze status=0009 13:44:40 Check angles 13:44:40 SkyScan query 13:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.005<-20267 Statuses=0008 0009 13:44:41 Msec=1500 True Az=112.995 Ze=-124.005 Az status=0008 Ze status=0009 13:44:41 Check angles 13:44:41 SkyScan query 13:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 13:44:42 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 13:44:42 Check angles 13:44:42 SkyScan query 13:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 13:44:42 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 13:44:43 Check angles 13:44:43 SkyScan query 13:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:44:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:44:43 Message to Master queued w/err=0: serial=118328 error=0 13:44:48 Received message from Master: op=Filter serial=118329 13:44:48 Color wheel filter change from 0 to 0 13:44:48 FLIGetFilterPos err=0 currentPosition=0 13:44:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:48 Filter is already there-color wheel unchanged 13:44:48 Received message from Master: op=Shutter serial=118330 13:44:48 Shutter LASER open 13:44:49 Received message from Camera: op=State serial=118332 13:44:49 GetSingleValue result=40 Value=cccccccc 13:44:49 SkyScan query 13:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:44:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:49 Parameters OK 13:44:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:49 Set A/D data flow result=40 13:44:49 Set A/D channel type result=40 13:44:49 Set A/D encoding result=40 13:44:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:49 Set channel filter=0.000000e+000 result=40 13:44:49 Config A/D Result=40 13:44:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:49 Get A/D filter: -9.255963e+061 result=40 13:44:49 Get A/D value=-858993460 result=40 13:44:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:49 Parameters OK 13:44:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:49 Set A/D data flow result=40 13:44:49 Set A/D channel type result=40 13:44:49 Set A/D encoding result=40 13:44:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:49 Set channel filter=0.000000e+000 result=40 13:44:49 Config A/D Result=40 13:44:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:49 Get A/D filter: -9.255963e+061 result=40 13:44:49 Get A/D value=-858993460 result=40 13:44:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:49 Aux= 13:44:49 Message to Camera, serial 118332 queued 13:44:58 Received message from Master: op=Shutter serial=118342 13:44:58 Shutter LASER close 13:44:58 Received message from Master: op=PointingHead serial=118346 13:44:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:44:58 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:44:58 Point started: ret=0 13:44:58 point_skyscan result=0 13:44:59 Check angles 13:44:59 SkyScan query 13:45:00 SkyScan query done: ret=0 az=89.85<-5990 ze=157.26<-1516 Statuses=0009 0009 13:45:00 Msec=0 True Az=89.85 Ze=157.26 Az status=0009 Ze status=0009 13:45:00 Check angles 13:45:00 SkyScan query 13:45:00 SkyScan query done: ret=0 az=72.435<-4829 ze=136.26<-2916 Statuses=0009 0009 13:45:00 Msec=750 True Az=72.435 Ze=136.26 Az status=0009 Ze status=0009 13:45:01 Check angles 13:45:01 SkyScan query 13:45:01 SkyScan query done: ret=0 az=54.915<-3661 ze=115.35<-4310 Statuses=0009 0009 13:45:01 Msec=1500 True Az=54.915 Ze=115.35 Az status=0009 Ze status=0009 13:45:01 Check angles 13:45:01 SkyScan query 13:45:02 SkyScan query done: ret=0 az=40.935<-2729 ze=94.335<-5711 Statuses=0009 0009 13:45:02 Msec=2250 True Az=40.935 Ze=94.335 Az status=0009 Ze status=0009 13:45:02 Check angles 13:45:02 SkyScan query 13:45:03 SkyScan query done: ret=0 az=40.995<-2733 ze=73.41<-7106 Statuses=0008 0009 13:45:03 Msec=3000 True Az=40.995 Ze=73.41 Az status=0008 Ze status=0009 13:45:03 Check angles 13:45:03 SkyScan query 13:45:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 13:45:03 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 13:45:04 Check angles 13:45:04 SkyScan query 13:45:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:45:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:45:04 Message to Master queued w/err=0: serial=118346 error=0 13:45:09 Received message from Master: op=Filter serial=118347 13:45:09 Color wheel filter change from 0 to 0 13:45:09 FLIGetFilterPos err=0 currentPosition=0 13:45:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:09 Filter is already there-color wheel unchanged 13:45:09 Received message from Master: op=Shutter serial=118348 13:45:09 Shutter LASER close 13:45:10 Received message from Camera: op=State serial=118350 13:45:10 GetSingleValue result=40 Value=cccccccc 13:45:10 SkyScan query 13:45:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:45:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:10 Parameters OK 13:45:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:10 Set A/D data flow result=40 13:45:10 Set A/D channel type result=40 13:45:10 Set A/D encoding result=40 13:45:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:10 Set channel filter=0.000000e+000 result=40 13:45:10 Config A/D Result=40 13:45:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:10 Get A/D filter: -9.255963e+061 result=40 13:45:10 Get A/D value=-858993460 result=40 13:45:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:10 Parameters OK 13:45:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:10 Set A/D data flow result=40 13:45:10 Set A/D channel type result=40 13:45:10 Set A/D encoding result=40 13:45:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:10 Set channel filter=0.000000e+000 result=40 13:45:10 Config A/D Result=40 13:45:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:10 Get A/D filter: -9.255963e+061 result=40 13:45:10 Get A/D value=-858993460 result=40 13:45:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:10 Aux= [UTC 2018-12-13 13:45:10] 13:45:10 Message to Camera, serial 118350 queued 13:45:27 Received message from Master: op=Identify serial=118351 13:45:47 Received message from Master: op=PointingHead serial=118366 13:45:47 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:45:47 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:45:47 Point started: ret=0 13:45:47 point_skyscan result=0 13:45:48 Check angles 13:45:48 SkyScan query 13:45:49 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 13:45:49 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 13:45:49 Check angles 13:45:49 SkyScan query 13:45:49 SkyScan query done: ret=0 az=81.69<-5446 ze=66.495<-7567 Statuses=0009 0008 13:45:49 Msec=750 True Az=81.69 Ze=66.495 Az status=0009 Ze status=0008 13:45:50 Check angles 13:45:50 SkyScan query 13:45:50 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 13:45:50 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 13:45:50 Check angles 13:45:50 SkyScan query 13:45:51 SkyScan query done: ret=0 az=116.88<-7792 ze=66.495<-7567 Statuses=0009 0008 13:45:51 Msec=2250 True Az=116.88 Ze=66.495 Az status=0009 Ze status=0008 13:45:51 Check angles 13:45:51 SkyScan query 13:45:52 SkyScan query done: ret=0 az=134.25<-8950 ze=66.495<-7567 Statuses=0009 0008 13:45:52 Msec=3000 True Az=134.25 Ze=66.495 Az status=0009 Ze status=0008 13:45:52 Check angles 13:45:52 SkyScan query 13:45:52 SkyScan query done: ret=0 az=151.65<-10110 ze=66.495<-7567 Statuses=0009 0008 13:45:52 Msec=3750 True Az=151.65 Ze=66.495 Az status=0009 Ze status=0008 13:45:53 Check angles 13:45:53 SkyScan query 13:45:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:45:53 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 13:45:53 Message to Master queued w/err=0: serial=118366 error=0 13:45:58 Received message from Master: op=Filter serial=118367 13:45:58 Color wheel filter change from 0 to 0 13:45:58 FLIGetFilterPos err=0 currentPosition=0 13:45:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:58 Filter is already there-color wheel unchanged 13:45:58 Received message from Master: op=Shutter serial=118368 13:45:58 Shutter LASER close 13:45:58 Received message from Camera: op=State serial=118370 13:45:58 GetSingleValue result=40 Value=cccccccc 13:45:58 SkyScan query 13:45:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:45:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:59 Parameters OK 13:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:59 Set A/D data flow result=40 13:45:59 Set A/D channel type result=40 13:45:59 Set A/D encoding result=40 13:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:59 Set channel filter=0.000000e+000 result=40 13:45:59 Config A/D Result=40 13:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:59 Get A/D filter: -9.255963e+061 result=40 13:45:59 Get A/D value=-858993460 result=40 13:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:59 Parameters OK 13:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:59 Set A/D data flow result=40 13:45:59 Set A/D channel type result=40 13:45:59 Set A/D encoding result=40 13:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:59 Set channel filter=0.000000e+000 result=40 13:45:59 Config A/D Result=40 13:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:59 Get A/D filter: -9.255963e+061 result=40 13:45:59 Get A/D value=-858993460 result=40 13:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:59 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:59 Aux= 13:45:59 Message to Camera, serial 118370 queued 13:46:36 Received message from Master: op=PointingHead serial=118383 13:46:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:46:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:46:36 Point started: ret=0 13:46:36 point_skyscan result=0 13:46:37 Check angles 13:46:37 SkyScan query 13:46:37 SkyScan query done: ret=0 az=134.58<-8972 ze=36.33<-9578 Statuses=0009 0009 13:46:37 Msec=0 True Az=134.58 Ze=36.33 Az status=0009 Ze status=0009 13:46:38 Check angles 13:46:38 SkyScan query 13:46:38 SkyScan query done: ret=0 az=117.225<-7815 ze=15.42<-10972 Statuses=0009 0009 13:46:38 Msec=750 True Az=117.225 Ze=15.42 Az status=0009 Ze status=0009 13:46:38 Check angles 13:46:38 SkyScan query 13:46:39 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.58<-12372 Statuses=0009 0009 13:46:39 Msec=1500 True Az=99.825 Ze=-5.58 Az status=0009 Ze status=0009 13:46:39 Check angles 13:46:39 SkyScan query 13:46:40 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.535<-13769 Statuses=0009 0009 13:46:40 Msec=2250 True Az=82.215 Ze=-26.535 Az status=0009 Ze status=0009 13:46:40 Check angles 13:46:40 SkyScan query 13:46:40 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.565<-14571 Statuses=0009 0008 13:46:40 Msec=3000 True Az=64.815 Ze=-38.565 Az status=0009 Ze status=0008 13:46:41 Check angles 13:46:41 SkyScan query 13:46:41 SkyScan query done: ret=0 az=47.37<-3158 ze=-38.535<-14569 Statuses=0009 0008 13:46:41 Msec=3750 True Az=47.37 Ze=-38.535 Az status=0009 Ze status=0008 13:46:41 Check angles 13:46:41 SkyScan query 13:46:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:46:42 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:46:42 Message to Master queued w/err=0: serial=118383 error=0 13:46:47 Received message from Master: op=Filter serial=118384 13:46:47 Color wheel filter change from 0 to 0 13:46:47 FLIGetFilterPos err=0 currentPosition=0 13:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:47 Filter is already there-color wheel unchanged 13:46:47 Received message from Master: op=Shutter serial=118385 13:46:47 Shutter LASER close 13:46:47 Received message from Camera: op=State serial=118387 13:46:47 GetSingleValue result=40 Value=cccccccc 13:46:47 SkyScan query 13:46:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:46:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:48 Parameters OK 13:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:48 Set A/D data flow result=40 13:46:48 Set A/D channel type result=40 13:46:48 Set A/D encoding result=40 13:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:48 Set channel filter=0.000000e+000 result=40 13:46:48 Config A/D Result=40 13:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:48 Get A/D filter: -9.255963e+061 result=40 13:46:48 Get A/D value=-858993460 result=40 13:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:48 Parameters OK 13:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:48 Set A/D data flow result=40 13:46:48 Set A/D channel type result=40 13:46:48 Set A/D encoding result=40 13:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:48 Set channel filter=0.000000e+000 result=40 13:46:48 Config A/D Result=40 13:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:48 Get A/D filter: -9.255963e+061 result=40 13:46:48 Get A/D value=-858993460 result=40 13:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:48 Aux= 13:46:48 Message to Camera, serial 118387 queued 13:47:25 Received message from Master: op=PointingHead serial=118400 13:47:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:47:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:47:25 Point started: ret=0 13:47:25 point_skyscan result=0 13:47:26 Check angles 13:47:26 SkyScan query 13:47:26 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.58<-16572 Statuses=0009 0009 13:47:26 Msec=0 True Az=64.2 Ze=-68.58 Az status=0009 Ze status=0009 13:47:26 Check angles 13:47:26 SkyScan query 13:47:27 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.955<-17997 Statuses=0009 0009 13:47:27 Msec=750 True Az=82.08 Ze=-89.955 Az status=0009 Ze status=0009 13:47:27 Check angles 13:47:27 SkyScan query 13:47:28 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.925<-19395 Statuses=0009 0009 13:47:28 Msec=1500 True Az=99.45 Ze=-110.925 Az status=0009 Ze status=0009 13:47:28 Check angles 13:47:28 SkyScan query 13:47:28 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.865<-20791 Statuses=0009 0009 13:47:28 Msec=2250 True Az=116.985 Ze=-131.865 Az status=0009 Ze status=0009 13:47:29 Check angles 13:47:29 SkyScan query 13:47:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 13:47:29 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 13:47:29 Check angles 13:47:29 SkyScan query 13:47:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:47:30 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:47:30 Message to Master queued w/err=0: serial=118400 error=0 13:47:35 Received message from Master: op=Filter serial=118401 13:47:35 Color wheel filter change from 0 to 0 13:47:35 FLIGetFilterPos err=0 currentPosition=0 13:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:35 Filter is already there-color wheel unchanged 13:47:35 Received message from Master: op=Shutter serial=118402 13:47:35 Shutter LASER close 13:47:35 Received message from Camera: op=State serial=118404 13:47:35 GetSingleValue result=40 Value=cccccccc 13:47:35 SkyScan query 13:47:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:36 Parameters OK 13:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:36 Set A/D data flow result=40 13:47:36 Set A/D channel type result=40 13:47:36 Set A/D encoding result=40 13:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:36 Set channel filter=0.000000e+000 result=40 13:47:36 Config A/D Result=40 13:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:36 Get A/D filter: -9.255963e+061 result=40 13:47:36 Get A/D value=-858993460 result=40 13:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:36 Parameters OK 13:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:36 Set A/D data flow result=40 13:47:36 Set A/D channel type result=40 13:47:36 Set A/D encoding result=40 13:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:36 Set channel filter=0.000000e+000 result=40 13:47:36 Config A/D Result=40 13:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:36 Get A/D filter: -9.255963e+061 result=40 13:47:36 Get A/D value=-858993460 result=40 13:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:36 Aux= 13:47:36 Message to Camera, serial 118404 queued 13:48:13 Received message from Master: op=PointingHead serial=118417 13:48:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:48:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:48:13 Point started: ret=0 13:48:13 point_skyscan result=0 13:48:14 Check angles 13:48:14 SkyScan query 13:48:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0009 0009 13:48:14 Msec=0 True Az=112.995 Ze=-171.51 Az status=0009 Ze status=0009 13:48:15 Check angles 13:48:15 SkyScan query 13:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:48:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:48:15 Message to Master queued w/err=0: serial=118417 error=0 13:48:20 Received message from Master: op=Filter serial=118418 13:48:20 Color wheel filter change from 0 to 0 13:48:20 FLIGetFilterPos err=0 currentPosition=0 13:48:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:20 Filter is already there-color wheel unchanged 13:48:20 Received message from Master: op=Shutter serial=118419 13:48:20 Shutter LASER open 13:48:20 Received message from Camera: op=State serial=118421 13:48:20 GetSingleValue result=40 Value=cccccccc 13:48:20 SkyScan query 13:48:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:48:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:21 Parameters OK 13:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:21 Set A/D data flow result=40 13:48:21 Set A/D channel type result=40 13:48:21 Set A/D encoding result=40 13:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:21 Set channel filter=0.000000e+000 result=40 13:48:21 Config A/D Result=40 13:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:21 Get A/D filter: -9.255963e+061 result=40 13:48:21 Get A/D value=-858993460 result=40 13:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:21 Parameters OK 13:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:21 Set A/D data flow result=40 13:48:21 Set A/D channel type result=40 13:48:21 Set A/D encoding result=40 13:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:21 Set channel filter=0.000000e+000 result=40 13:48:21 Config A/D Result=40 13:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:21 Get A/D filter: -9.255963e+061 result=40 13:48:21 Get A/D value=-858993460 result=40 13:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:21 Aux= 13:48:21 Message to Camera, serial 118421 queued 13:48:29 Received message from Master: op=Shutter serial=118430 13:48:29 Shutter LASER close 13:48:29 Received message from Master: op=PointingHead serial=118434 13:48:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:48:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:48:30 Point started: ret=0 13:48:30 point_skyscan result=0 13:48:30 Check angles 13:48:30 SkyScan query 13:48:31 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.325<-21555 Statuses=0009 0009 13:48:31 Msec=0 True Az=135.825 Ze=-143.325 Az status=0009 Ze status=0009 13:48:31 Check angles 13:48:31 SkyScan query 13:48:32 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.905<-20127 Statuses=0009 0009 13:48:32 Msec=750 True Az=153.69 Ze=-121.905 Az status=0009 Ze status=0009 13:48:32 Check angles 13:48:32 SkyScan query 13:48:32 SkyScan query done: ret=0 az=171.585<-11439 ze=-100.485<-18699 Statuses=0009 0009 13:48:32 Msec=1500 True Az=171.585 Ze=-100.485 Az status=0009 Ze status=0009 13:48:33 Check angles 13:48:33 SkyScan query 13:48:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.575<-17305 Statuses=0008 0009 13:48:33 Msec=2250 True Az=176.01 Ze=-79.575 Az status=0008 Ze status=0009 13:48:33 Check angles 13:48:33 SkyScan query 13:48:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.59<-15906 Statuses=0008 0009 13:48:34 Msec=3000 True Az=176.01 Ze=-58.59 Az status=0008 Ze status=0009 13:48:34 Check angles 13:48:34 SkyScan query 13:48:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:48:35 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:48:35 Message to Master queued w/err=0: serial=118434 error=0 13:48:40 Received message from Master: op=Filter serial=118435 13:48:40 Color wheel filter change from 0 to 0 13:48:40 FLIGetFilterPos err=0 currentPosition=0 13:48:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:40 Filter is already there-color wheel unchanged 13:48:40 Received message from Master: op=Shutter serial=118436 13:48:40 Shutter LASER close 13:48:40 Received message from Camera: op=State serial=118438 13:48:40 GetSingleValue result=40 Value=cccccccc 13:48:40 SkyScan query 13:48:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:48:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:41 Parameters OK 13:48:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:41 Set A/D data flow result=40 13:48:41 Set A/D channel type result=40 13:48:41 Set A/D encoding result=40 13:48:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:41 Set channel filter=0.000000e+000 result=40 13:48:41 Config A/D Result=40 13:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:41 Get A/D filter: -9.255963e+061 result=40 13:48:41 Get A/D value=-858993460 result=40 13:48:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:41 Parameters OK 13:48:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:41 Set A/D data flow result=40 13:48:41 Set A/D channel type result=40 13:48:41 Set A/D encoding result=40 13:48:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:41 Set channel filter=0.000000e+000 result=40 13:48:41 Config A/D Result=40 13:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:41 Get A/D filter: -9.255963e+061 result=40 13:48:41 Get A/D value=-858993460 result=40 13:48:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:41 Aux= 13:48:41 Message to Camera, serial 118438 queued 13:49:17 Received message from Master: op=PointingHead serial=118451 13:49:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:49:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:49:18 Point started: ret=0 13:49:18 point_skyscan result=0 13:49:18 Check angles 13:49:18 SkyScan query 13:49:19 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.855<-13457 Statuses=0009 0009 13:49:19 Msec=0 True Az=152.97 Ze=-21.855 Az status=0009 Ze status=0009 13:49:19 Check angles 13:49:19 SkyScan query 13:49:20 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.825<-12055 Statuses=0009 0009 13:49:20 Msec=750 True Az=135.675 Ze=-0.825 Az status=0009 Ze status=0009 13:49:20 Check angles 13:49:20 SkyScan query 13:49:21 SkyScan query done: ret=0 az=117.72<-7848 ze=20.535<-10631 Statuses=0009 0009 13:49:21 Msec=1500 True Az=117.72 Ze=20.535 Az status=0009 Ze status=0009 13:49:21 Check angles 13:49:21 SkyScan query 13:49:21 SkyScan query done: ret=0 az=99.99<-6666 ze=41.955<-9203 Statuses=0009 0009 13:49:21 Msec=2250 True Az=99.99 Ze=41.955 Az status=0009 Ze status=0009 13:49:22 Check angles 13:49:22 SkyScan query 13:49:22 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:49:22 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:49:22 Check angles 13:49:22 SkyScan query 13:49:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:49:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:49:23 Message to Master queued w/err=0: serial=118451 error=0 13:49:28 Received message from Master: op=Filter serial=118452 13:49:28 Color wheel filter change from 0 to 0 13:49:28 FLIGetFilterPos err=0 currentPosition=0 13:49:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:28 Filter is already there-color wheel unchanged 13:49:28 Received message from Master: op=Shutter serial=118453 13:49:28 Shutter LASER close 13:49:28 Received message from Camera: op=State serial=118455 13:49:28 GetSingleValue result=40 Value=cccccccc 13:49:28 SkyScan query 13:49:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:49:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:29 Parameters OK 13:49:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:29 Set A/D data flow result=40 13:49:29 Set A/D channel type result=40 13:49:29 Set A/D encoding result=40 13:49:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:29 Set channel filter=0.000000e+000 result=40 13:49:29 Config A/D Result=40 13:49:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:29 Get A/D filter: -9.255963e+061 result=40 13:49:29 Get A/D value=-858993460 result=40 13:49:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:29 Parameters OK 13:49:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:29 Set A/D data flow result=40 13:49:29 Set A/D channel type result=40 13:49:29 Set A/D encoding result=40 13:49:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:29 Set channel filter=0.000000e+000 result=40 13:49:29 Config A/D Result=40 13:49:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:29 Get A/D filter: -9.255963e+061 result=40 13:49:29 Get A/D value=-858993460 result=40 13:49:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:29 Aux= 13:49:29 Message to Camera, serial 118455 queued 13:50:05 Received message from Master: op=PointingHead serial=118468 13:50:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:50:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:50:06 Point started: ret=0 13:50:06 point_skyscan result=0 13:50:07 Check angles 13:50:07 SkyScan query 13:50:07 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 13:50:07 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 13:50:07 Check angles 13:50:07 SkyScan query 13:50:08 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 13:50:08 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 13:50:08 Check angles 13:50:08 SkyScan query 13:50:09 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 13:50:09 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 13:50:09 Check angles 13:50:09 SkyScan query 13:50:09 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 13:50:09 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 13:50:10 Check angles 13:50:10 SkyScan query 13:50:10 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:50:10 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:50:10 Check angles 13:50:10 SkyScan query 13:50:11 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:50:11 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:50:11 Message to Master queued w/err=0: serial=118468 error=0 13:50:16 Received message from Master: op=Filter serial=118469 13:50:16 Color wheel filter change from 0 to 0 13:50:16 FLIGetFilterPos err=0 currentPosition=0 13:50:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:16 Filter is already there-color wheel unchanged 13:50:16 Received message from Master: op=Shutter serial=118470 13:50:16 Shutter LASER close 13:50:16 Received message from Camera: op=State serial=118472 13:50:16 GetSingleValue result=40 Value=cccccccc 13:50:16 SkyScan query 13:50:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:50:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:17 Parameters OK 13:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:17 Set A/D data flow result=40 13:50:17 Set A/D channel type result=40 13:50:17 Set A/D encoding result=40 13:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:17 Set channel filter=0.000000e+000 result=40 13:50:17 Config A/D Result=40 13:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:17 Get A/D filter: -9.255963e+061 result=40 13:50:17 Get A/D value=-858993460 result=40 13:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:17 Parameters OK 13:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:17 Set A/D data flow result=40 13:50:17 Set A/D channel type result=40 13:50:17 Set A/D encoding result=40 13:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:17 Set channel filter=0.000000e+000 result=40 13:50:17 Config A/D Result=40 13:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:17 Get A/D filter: -9.255963e+061 result=40 13:50:17 Get A/D value=-858993460 result=40 13:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:17 Aux= 13:50:17 Message to Camera, serial 118472 queued 13:50:54 Received message from Master: op=PointingHead serial=118485 13:50:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:50:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:50:54 Point started: ret=0 13:50:54 point_skyscan result=0 13:50:55 Check angles 13:50:55 SkyScan query 13:50:55 SkyScan query done: ret=0 az=152.925<-10195 ze=8.625<-11425 Statuses=0009 0009 13:50:55 Msec=0 True Az=152.925 Ze=8.625 Az status=0009 Ze status=0009 13:50:55 Check angles 13:50:55 SkyScan query 13:50:56 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.315<-12821 Statuses=0009 0009 13:50:56 Msec=750 True Az=135.42 Ze=-12.315 Az status=0009 Ze status=0009 13:50:56 Check angles 13:50:56 SkyScan query 13:50:57 SkyScan query done: ret=0 az=117.945<-7863 ze=-33.255<-14217 Statuses=0009 0009 13:50:57 Msec=1500 True Az=117.945 Ze=-33.255 Az status=0009 Ze status=0009 13:50:57 Check angles 13:50:57 SkyScan query 13:50:58 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.54<-15436 Statuses=0009 0009 13:50:58 Msec=2250 True Az=100.575 Ze=-51.54 Az status=0009 Ze status=0009 13:50:58 Check angles 13:50:58 SkyScan query 13:50:58 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:50:58 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:50:58 Check angles 13:50:58 SkyScan query 13:50:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:50:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:50:59 Message to Master queued w/err=0: serial=118485 error=0 13:51:04 Received message from Master: op=Filter serial=118486 13:51:04 Color wheel filter change from 0 to 0 13:51:04 FLIGetFilterPos err=0 currentPosition=0 13:51:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:04 Filter is already there-color wheel unchanged 13:51:04 Received message from Master: op=Shutter serial=118487 13:51:04 Shutter LASER close 13:51:04 Received message from Camera: op=State serial=118489 13:51:04 GetSingleValue result=40 Value=cccccccc 13:51:04 SkyScan query 13:51:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:51:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:05 Parameters OK 13:51:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:05 Set A/D data flow result=40 13:51:05 Set A/D channel type result=40 13:51:05 Set A/D encoding result=40 13:51:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:05 Set channel filter=0.000000e+000 result=40 13:51:05 Config A/D Result=40 13:51:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:05 Get A/D filter: -9.255963e+061 result=40 13:51:05 Get A/D value=-858993460 result=40 13:51:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:05 Parameters OK 13:51:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:05 Set A/D data flow result=40 13:51:05 Set A/D channel type result=40 13:51:05 Set A/D encoding result=40 13:51:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:05 Set channel filter=0.000000e+000 result=40 13:51:05 Config A/D Result=40 13:51:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:05 Get A/D filter: -9.255963e+061 result=40 13:51:05 Get A/D value=-858993460 result=40 13:51:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:05 Aux= 13:51:05 Message to Camera, serial 118489 queued 13:51:42 Received message from Master: op=PointingHead serial=118502 13:51:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:51:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:51:42 Point started: ret=0 13:51:42 point_skyscan result=0 13:51:43 Check angles 13:51:43 SkyScan query 13:51:43 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.405<-17427 Statuses=0009 0009 13:51:43 Msec=0 True Az=109.14 Ze=-81.405 Az status=0009 Ze status=0009 13:51:43 Check angles 13:51:43 SkyScan query 13:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.36<-18824 Statuses=0008 0009 13:51:44 Msec=750 True Az=112.995 Ze=-102.36 Az status=0008 Ze status=0009 13:51:44 Check angles 13:51:44 SkyScan query 13:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 13:51:45 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 13:51:45 Check angles 13:51:45 SkyScan query 13:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.27<-21618 Statuses=0008 0009 13:51:46 Msec=2250 True Az=112.995 Ze=-144.27 Az status=0008 Ze status=0009 13:51:46 Check angles 13:51:46 SkyScan query 13:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.24<-23016 Statuses=0008 0009 13:51:46 Msec=3000 True Az=112.995 Ze=-165.24 Az status=0008 Ze status=0009 13:51:46 Check angles 13:51:46 SkyScan query 13:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:51:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:51:47 Message to Master queued w/err=0: serial=118502 error=0 13:51:52 Received message from Master: op=Filter serial=118503 13:51:52 Color wheel filter change from 0 to 0 13:51:52 FLIGetFilterPos err=0 currentPosition=0 13:51:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:52 Filter is already there-color wheel unchanged 13:51:52 Received message from Master: op=Shutter serial=118504 13:51:52 Shutter LASER open 13:51:52 Received message from Camera: op=State serial=118506 13:51:52 GetSingleValue result=40 Value=cccccccc 13:51:52 SkyScan query 13:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:51:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:53 Parameters OK 13:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:53 Set A/D data flow result=40 13:51:53 Set A/D channel type result=40 13:51:53 Set A/D encoding result=40 13:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:53 Set channel filter=0.000000e+000 result=40 13:51:53 Config A/D Result=40 13:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:53 Get A/D filter: -9.255963e+061 result=40 13:51:53 Get A/D value=-858993460 result=40 13:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:53 Parameters OK 13:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:53 Set A/D data flow result=40 13:51:53 Set A/D channel type result=40 13:51:53 Set A/D encoding result=40 13:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:53 Set channel filter=0.000000e+000 result=40 13:51:53 Config A/D Result=40 13:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:53 Get A/D filter: -9.255963e+061 result=40 13:51:53 Get A/D value=-858993460 result=40 13:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:53 Aux= 13:51:53 Message to Camera, serial 118506 queued 13:52:01 Received message from Master: op=Shutter serial=118516 13:52:01 Shutter LASER close 13:52:02 Received message from Master: op=PointingHead serial=118520 13:52:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:52:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:52:02 Point started: ret=0 13:52:02 point_skyscan result=0 13:52:03 Check angles 13:52:03 SkyScan query 13:52:04 SkyScan query done: ret=0 az=89.43<-5962 ze=156.69<-1554 Statuses=0009 0009 13:52:04 Msec=0 True Az=89.43 Ze=156.69 Az status=0009 Ze status=0009 13:52:04 Check angles 13:52:04 SkyScan query 13:52:04 SkyScan query done: ret=0 az=71.985<-4799 ze=135.735<-2951 Statuses=0009 0009 13:52:04 Msec=750 True Az=71.985 Ze=135.735 Az status=0009 Ze status=0009 13:52:04 Check angles 13:52:04 SkyScan query 13:52:05 SkyScan query done: ret=0 az=54.63<-3642 ze=114.765<-4349 Statuses=0009 0009 13:52:05 Msec=1500 True Az=54.63 Ze=114.765 Az status=0009 Ze status=0009 13:52:05 Check angles 13:52:05 SkyScan query 13:52:06 SkyScan query done: ret=0 az=40.95<-2730 ze=93.405<-5773 Statuses=0009 0009 13:52:06 Msec=2250 True Az=40.95 Ze=93.405 Az status=0009 Ze status=0009 13:52:06 Check angles 13:52:06 SkyScan query 13:52:07 SkyScan query done: ret=0 az=40.995<-2733 ze=72.435<-7171 Statuses=0008 0009 13:52:07 Msec=3000 True Az=40.995 Ze=72.435 Az status=0008 Ze status=0009 13:52:07 Check angles 13:52:07 SkyScan query 13:52:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 13:52:07 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 13:52:08 Check angles 13:52:08 SkyScan query 13:52:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:52:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:52:08 Message to Master queued w/err=0: serial=118520 error=0 13:52:13 Received message from Master: op=Filter serial=118521 13:52:13 Color wheel filter change from 0 to 0 13:52:13 FLIGetFilterPos err=0 currentPosition=0 13:52:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:13 Filter is already there-color wheel unchanged 13:52:13 Received message from Master: op=Shutter serial=118522 13:52:13 Shutter LASER close 13:52:13 Received message from Camera: op=State serial=118524 13:52:13 GetSingleValue result=40 Value=cccccccc 13:52:13 SkyScan query 13:52:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:52:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:14 Parameters OK 13:52:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:14 Set A/D data flow result=40 13:52:14 Set A/D channel type result=40 13:52:14 Set A/D encoding result=40 13:52:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:14 Set channel filter=0.000000e+000 result=40 13:52:14 Config A/D Result=40 13:52:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:14 Get A/D filter: -9.255963e+061 result=40 13:52:14 Get A/D value=-858993460 result=40 13:52:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:14 Parameters OK 13:52:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:14 Set A/D data flow result=40 13:52:14 Set A/D channel type result=40 13:52:14 Set A/D encoding result=40 13:52:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:14 Set channel filter=0.000000e+000 result=40 13:52:14 Config A/D Result=40 13:52:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:14 Get A/D filter: -9.255963e+061 result=40 13:52:14 Get A/D value=-858993460 result=40 13:52:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:14 Aux= 13:52:14 Message to Camera, serial 118524 queued 13:52:51 Received message from Master: op=PointingHead serial=118537 13:52:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:52:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:52:51 Point started: ret=0 13:52:51 point_skyscan result=0 13:52:52 Check angles 13:52:52 SkyScan query 13:52:53 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 13:52:53 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 13:52:53 Check angles 13:52:53 SkyScan query 13:52:53 SkyScan query done: ret=0 az=81.855<-5457 ze=66.51<-7566 Statuses=0009 0008 13:52:53 Msec=750 True Az=81.855 Ze=66.51 Az status=0009 Ze status=0008 13:52:54 Check angles 13:52:54 SkyScan query 13:52:54 SkyScan query done: ret=0 az=99.795<-6653 ze=66.495<-7567 Statuses=0009 0008 13:52:54 Msec=1500 True Az=99.795 Ze=66.495 Az status=0009 Ze status=0008 13:52:54 Check angles 13:52:54 SkyScan query 13:52:55 SkyScan query done: ret=0 az=117.645<-7843 ze=66.495<-7567 Statuses=0009 0008 13:52:55 Msec=2250 True Az=117.645 Ze=66.495 Az status=0009 Ze status=0008 13:52:55 Check angles 13:52:55 SkyScan query 13:52:56 SkyScan query done: ret=0 az=135.195<-9013 ze=66.495<-7567 Statuses=0009 0008 13:52:56 Msec=3000 True Az=135.195 Ze=66.495 Az status=0009 Ze status=0008 13:52:56 Check angles 13:52:56 SkyScan query 13:52:56 SkyScan query done: ret=0 az=152.52<-10168 ze=66.495<-7567 Statuses=0009 0008 13:52:56 Msec=3750 True Az=152.52 Ze=66.495 Az status=0009 Ze status=0008 13:52:57 Check angles 13:52:57 SkyScan query 13:52:57 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:52:57 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:52:57 Message to Master queued w/err=0: serial=118537 error=0 13:53:02 Received message from Master: op=Filter serial=118538 13:53:02 Color wheel filter change from 0 to 0 13:53:02 FLIGetFilterPos err=0 currentPosition=0 13:53:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:02 Filter is already there-color wheel unchanged 13:53:02 Received message from Master: op=Shutter serial=118539 13:53:02 Shutter LASER close 13:53:02 Received message from Camera: op=State serial=118541 13:53:02 GetSingleValue result=40 Value=cccccccc 13:53:02 SkyScan query 13:53:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:53:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:03 Parameters OK 13:53:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:03 Set A/D data flow result=40 13:53:03 Set A/D channel type result=40 13:53:03 Set A/D encoding result=40 13:53:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:03 Set channel filter=0.000000e+000 result=40 13:53:03 Config A/D Result=40 13:53:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:03 Get A/D filter: -9.255963e+061 result=40 13:53:03 Get A/D value=-858993460 result=40 13:53:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:03 Parameters OK 13:53:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:03 Set A/D data flow result=40 13:53:03 Set A/D channel type result=40 13:53:03 Set A/D encoding result=40 13:53:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:03 Set channel filter=0.000000e+000 result=40 13:53:03 Config A/D Result=40 13:53:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:03 Get A/D filter: -9.255963e+061 result=40 13:53:03 Get A/D value=-858993460 result=40 13:53:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:03 Aux= 13:53:03 Message to Camera, serial 118541 queued 13:53:40 Received message from Master: op=PointingHead serial=118554 13:53:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:53:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:53:40 Point started: ret=0 13:53:40 point_skyscan result=0 13:53:41 Check angles 13:53:41 SkyScan query 13:53:41 SkyScan query done: ret=0 az=135.18<-9012 ze=36.96<-9536 Statuses=0009 0009 13:53:41 Msec=0 True Az=135.18 Ze=36.96 Az status=0009 Ze status=0009 13:53:42 Check angles 13:53:42 SkyScan query 13:53:42 SkyScan query done: ret=0 az=117.285<-7819 ze=15.63<-10958 Statuses=0009 0009 13:53:42 Msec=750 True Az=117.285 Ze=15.63 Az status=0009 Ze status=0009 13:53:42 Check angles 13:53:42 SkyScan query 13:53:43 SkyScan query done: ret=0 az=99.585<-6639 ze=-5.79<-12386 Statuses=0009 0009 13:53:43 Msec=1500 True Az=99.585 Ze=-5.79 Az status=0009 Ze status=0009 13:53:43 Check angles 13:53:43 SkyScan query 13:53:44 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.745<-13783 Statuses=0009 0009 13:53:44 Msec=2250 True Az=82.125 Ze=-26.745 Az status=0009 Ze status=0009 13:53:44 Check angles 13:53:44 SkyScan query 13:53:44 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.565<-14571 Statuses=0009 0008 13:53:44 Msec=3000 True Az=64.605 Ze=-38.565 Az status=0009 Ze status=0008 13:53:45 Check angles 13:53:45 SkyScan query 13:53:45 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 13:53:45 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 13:53:45 Check angles 13:53:45 SkyScan query 13:53:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:53:46 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:53:46 Message to Master queued w/err=0: serial=118554 error=0 13:53:51 Received message from Master: op=Filter serial=118555 13:53:51 Color wheel filter change from 0 to 0 13:53:51 FLIGetFilterPos err=0 currentPosition=0 13:53:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:51 Filter is already there-color wheel unchanged 13:53:51 Received message from Master: op=Shutter serial=118556 13:53:51 Shutter LASER close 13:53:51 Received message from Camera: op=State serial=118558 13:53:51 GetSingleValue result=40 Value=cccccccc 13:53:51 SkyScan query 13:53:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:53:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:52 Parameters OK 13:53:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:52 Set A/D data flow result=40 13:53:52 Set A/D channel type result=40 13:53:52 Set A/D encoding result=40 13:53:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:52 Set channel filter=0.000000e+000 result=40 13:53:52 Config A/D Result=40 13:53:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:52 Get A/D filter: -9.255963e+061 result=40 13:53:52 Get A/D value=-858993460 result=40 13:53:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:52 Parameters OK 13:53:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:52 Set A/D data flow result=40 13:53:52 Set A/D channel type result=40 13:53:52 Set A/D encoding result=40 13:53:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:52 Set channel filter=0.000000e+000 result=40 13:53:52 Config A/D Result=40 13:53:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:52 Get A/D filter: -9.255963e+061 result=40 13:53:52 Get A/D value=-858993460 result=40 13:53:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:52 Aux= 13:53:52 Message to Camera, serial 118558 queued 13:54:29 Received message from Master: op=PointingHead serial=118571 13:54:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:54:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:54:29 Point started: ret=0 13:54:29 point_skyscan result=0 13:54:30 Check angles 13:54:30 SkyScan query 13:54:30 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.085<-16539 Statuses=0009 0009 13:54:30 Msec=0 True Az=63.885 Ze=-68.085 Az status=0009 Ze status=0009 13:54:30 Check angles 13:54:30 SkyScan query 13:54:31 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.1<-17940 Statuses=0009 0009 13:54:31 Msec=750 True Az=81.345 Ze=-89.1 Az status=0009 Ze status=0009 13:54:31 Check angles 13:54:31 SkyScan query 13:54:32 SkyScan query done: ret=0 az=98.7<-6580 ze=-110.01<-19334 Statuses=0009 0009 13:54:32 Msec=1500 True Az=98.7 Ze=-110.01 Az status=0009 Ze status=0009 13:54:32 Check angles 13:54:32 SkyScan query 13:54:33 SkyScan query done: ret=0 az=116.28<-7752 ze=-130.995<-20733 Statuses=0009 0009 13:54:33 Msec=2250 True Az=116.28 Ze=-130.995 Az status=0009 Ze status=0009 13:54:33 Check angles 13:54:33 SkyScan query 13:54:33 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.555<-21437 Statuses=0009 0008 13:54:33 Msec=3000 True Az=131.085 Ze=-141.555 Az status=0009 Ze status=0008 13:54:33 Check angles 13:54:33 SkyScan query 13:54:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 13:54:34 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 13:54:34 Message to Master queued w/err=0: serial=118571 error=0 13:54:39 Received message from Master: op=Filter serial=118572 13:54:39 Color wheel filter change from 0 to 0 13:54:39 FLIGetFilterPos err=0 currentPosition=0 13:54:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:39 Filter is already there-color wheel unchanged 13:54:39 Received message from Master: op=Shutter serial=118573 13:54:39 Shutter LASER close 13:54:39 Received message from Camera: op=State serial=118575 13:54:39 GetSingleValue result=40 Value=cccccccc 13:54:39 SkyScan query 13:54:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:54:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:40 Parameters OK 13:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:40 Set A/D data flow result=40 13:54:40 Set A/D channel type result=40 13:54:40 Set A/D encoding result=40 13:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:40 Set channel filter=0.000000e+000 result=40 13:54:40 Config A/D Result=40 13:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:40 Get A/D filter: -9.255963e+061 result=40 13:54:40 Get A/D value=-858993460 result=40 13:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:40 Parameters OK 13:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:40 Set A/D data flow result=40 13:54:40 Set A/D channel type result=40 13:54:40 Set A/D encoding result=40 13:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:40 Set channel filter=0.000000e+000 result=40 13:54:40 Config A/D Result=40 13:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:40 Get A/D filter: -9.255963e+061 result=40 13:54:40 Get A/D value=-858993460 result=40 13:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:40 Aux= 13:54:40 Message to Camera, serial 118575 queued 13:55:17 Received message from Master: op=PointingHead serial=118588 13:55:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:55:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:55:17 Point started: ret=0 13:55:17 point_skyscan result=0 13:55:18 Check angles 13:55:18 SkyScan query 13:55:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 13:55:18 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 13:55:18 Check angles 13:55:18 SkyScan query 13:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:55:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:55:19 Message to Master queued w/err=0: serial=118588 error=0 13:55:24 Received message from Master: op=Filter serial=118589 13:55:24 Color wheel filter change from 0 to 0 13:55:24 FLIGetFilterPos err=0 currentPosition=0 13:55:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:24 Filter is already there-color wheel unchanged 13:55:24 Received message from Master: op=Shutter serial=118590 13:55:24 Shutter LASER open 13:55:24 Received message from Camera: op=State serial=118592 13:55:24 GetSingleValue result=40 Value=cccccccc 13:55:24 SkyScan query 13:55:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:55:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:25 Parameters OK 13:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:25 Set A/D data flow result=40 13:55:25 Set A/D channel type result=40 13:55:25 Set A/D encoding result=40 13:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:25 Set channel filter=0.000000e+000 result=40 13:55:25 Config A/D Result=40 13:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:25 Get A/D filter: -9.255963e+061 result=40 13:55:25 Get A/D value=-858993460 result=40 13:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:25 Parameters OK 13:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:25 Set A/D data flow result=40 13:55:25 Set A/D channel type result=40 13:55:25 Set A/D encoding result=40 13:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:25 Set channel filter=0.000000e+000 result=40 13:55:25 Config A/D Result=40 13:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:25 Get A/D filter: -9.255963e+061 result=40 13:55:25 Get A/D value=-858993460 result=40 13:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:25 Aux= 13:55:25 Message to Camera, serial 118592 queued 13:55:33 Received message from Master: op=Shutter serial=118602 13:55:33 Shutter LASER close 13:55:34 Received message from Master: op=PointingHead serial=118606 13:55:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:55:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:55:34 Point started: ret=0 13:55:34 point_skyscan result=0 13:55:35 Check angles 13:55:35 SkyScan query 13:55:36 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.995<-21533 Statuses=0009 0009 13:55:36 Msec=0 True Az=136.23 Ze=-142.995 Az status=0009 Ze status=0009 [UTC 2018-12-13 13:55:36] 13:55:36 Check angles 13:55:36 SkyScan query 13:55:37 SkyScan query done: ret=0 az=155.235<-10349 ze=-120.3<-20020 Statuses=0009 0009 13:55:37 Msec=750 True Az=155.235 Ze=-120.3 Az status=0009 Ze status=0009 13:55:37 Check angles 13:55:37 SkyScan query 13:55:37 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.605<-18707 Statuses=0009 0009 13:55:37 Msec=1500 True Az=171.57 Ze=-100.605 Az status=0009 Ze status=0009 13:55:37 Check angles 13:55:37 SkyScan query 13:55:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 13:55:38 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 13:55:38 Check angles 13:55:38 SkyScan query 13:55:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.725<-15915 Statuses=0008 0009 13:55:39 Msec=3000 True Az=176.01 Ze=-58.725 Az status=0008 Ze status=0009 13:55:39 Check angles 13:55:39 SkyScan query 13:55:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 13:55:39 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 13:55:39 Message to Master queued w/err=0: serial=118606 error=0 13:55:44 Received message from Master: op=Filter serial=118607 13:55:44 Color wheel filter change from 0 to 0 13:55:44 FLIGetFilterPos err=0 currentPosition=0 13:55:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:44 Filter is already there-color wheel unchanged 13:55:45 Received message from Master: op=Shutter serial=118608 13:55:45 Shutter LASER close 13:55:45 Received message from Camera: op=State serial=118610 13:55:45 GetSingleValue result=40 Value=cccccccc 13:55:45 SkyScan query 13:55:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:55:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:45 Parameters OK 13:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:45 Set A/D data flow result=40 13:55:45 Set A/D channel type result=40 13:55:45 Set A/D encoding result=40 13:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:45 Set channel filter=0.000000e+000 result=40 13:55:45 Config A/D Result=40 13:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:45 Get A/D filter: -9.255963e+061 result=40 13:55:45 Get A/D value=-858993460 result=40 13:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:45 Parameters OK 13:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:45 Set A/D data flow result=40 13:55:45 Set A/D channel type result=40 13:55:45 Set A/D encoding result=40 13:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:45 Set channel filter=0.000000e+000 result=40 13:55:45 Config A/D Result=40 13:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:45 Get A/D filter: -9.255963e+061 result=40 13:55:45 Get A/D value=-858993460 result=40 13:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:45 Aux= 13:55:45 Message to Camera, serial 118610 queued [UTC 2018-12-13 13:55:52] 13:56:22 Received message from Master: op=PointingHead serial=118623 13:56:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:56:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:56:23 Point started: ret=0 13:56:23 point_skyscan result=0 13:56:23 Check angles 13:56:23 SkyScan query 13:56:24 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.495<-13433 Statuses=0009 0009 13:56:24 Msec=0 True Az=152.79 Ze=-21.495 Az status=0009 Ze status=0009 13:56:24 Check angles 13:56:24 SkyScan query 13:56:25 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.51<-12034 Statuses=0009 0009 13:56:25 Msec=750 True Az=135.315 Ze=-0.51 Az status=0009 Ze status=0009 13:56:25 Check angles 13:56:25 SkyScan query 13:56:25 SkyScan query done: ret=0 az=117.405<-7827 ze=20.865<-10609 Statuses=0009 0009 13:56:25 Msec=1500 True Az=117.405 Ze=20.865 Az status=0009 Ze status=0009 13:56:26 Check angles 13:56:26 SkyScan query 13:56:26 SkyScan query done: ret=0 az=100.065<-6671 ze=41.82<-9212 Statuses=0009 0009 13:56:26 Msec=2250 True Az=100.065 Ze=41.82 Az status=0009 Ze status=0009 13:56:26 Check angles 13:56:26 SkyScan query 13:56:27 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 13:56:27 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 13:56:27 Check angles 13:56:27 SkyScan query 13:56:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:56:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:56:28 Message to Master queued w/err=0: serial=118623 error=0 13:56:33 Received message from Master: op=Filter serial=118624 13:56:33 Color wheel filter change from 0 to 0 13:56:33 FLIGetFilterPos err=0 currentPosition=0 13:56:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:33 Filter is already there-color wheel unchanged 13:56:33 Received message from Master: op=Shutter serial=118625 13:56:33 Shutter LASER close 13:56:33 Received message from Camera: op=State serial=118627 13:56:33 GetSingleValue result=40 Value=cccccccc 13:56:33 SkyScan query 13:56:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:56:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:33 Parameters OK 13:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:33 Set A/D data flow result=40 13:56:33 Set A/D channel type result=40 13:56:33 Set A/D encoding result=40 13:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:33 Set channel filter=0.000000e+000 result=40 13:56:33 Config A/D Result=40 13:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:33 Get A/D filter: -9.255963e+061 result=40 13:56:33 Get A/D value=-858993460 result=40 13:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:33 Parameters OK 13:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:33 Set A/D data flow result=40 13:56:33 Set A/D channel type result=40 13:56:33 Set A/D encoding result=40 13:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:33 Set channel filter=0.000000e+000 result=40 13:56:33 Config A/D Result=40 13:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:33 Get A/D filter: -9.255963e+061 result=40 13:56:33 Get A/D value=-858993460 result=40 13:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:33 Aux= 13:56:33 Message to Camera, serial 118627 queued 13:57:10 Received message from Master: op=PointingHead serial=118640 13:57:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:57:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:57:11 Point started: ret=0 13:57:11 point_skyscan result=0 13:57:11 Check angles 13:57:11 SkyScan query 13:57:12 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 13:57:12 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 13:57:12 Check angles 13:57:12 SkyScan query 13:57:13 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 13:57:13 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 13:57:13 Check angles 13:57:13 SkyScan query 13:57:13 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 13:57:13 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 13:57:14 Check angles 13:57:14 SkyScan query 13:57:14 SkyScan query done: ret=0 az=161.16<-10744 ze=38.505<-9433 Statuses=0009 0008 13:57:14 Msec=2250 True Az=161.16 Ze=38.505 Az status=0009 Ze status=0008 13:57:14 Check angles 13:57:14 SkyScan query 13:57:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:57:15 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:57:15 Check angles 13:57:15 SkyScan query 13:57:16 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:57:16 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:57:16 Message to Master queued w/err=0: serial=118640 error=0 13:57:21 Received message from Master: op=Filter serial=118641 13:57:21 Color wheel filter change from 0 to 0 13:57:21 FLIGetFilterPos err=0 currentPosition=0 13:57:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:21 Filter is already there-color wheel unchanged 13:57:21 Received message from Master: op=Shutter serial=118642 13:57:21 Shutter LASER close 13:57:21 Received message from Camera: op=State serial=118644 13:57:21 GetSingleValue result=40 Value=cccccccc 13:57:21 SkyScan query 13:57:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:57:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:22 Parameters OK 13:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:22 Set A/D data flow result=40 13:57:22 Set A/D channel type result=40 13:57:22 Set A/D encoding result=40 13:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:22 Set channel filter=0.000000e+000 result=40 13:57:22 Config A/D Result=40 13:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:22 Get A/D filter: -9.255963e+061 result=40 13:57:22 Get A/D value=-858993460 result=40 13:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:22 Parameters OK 13:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:22 Set A/D data flow result=40 13:57:22 Set A/D channel type result=40 13:57:22 Set A/D encoding result=40 13:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:22 Set channel filter=0.000000e+000 result=40 13:57:22 Config A/D Result=40 13:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:22 Get A/D filter: -9.255963e+061 result=40 13:57:22 Get A/D value=-858993460 result=40 13:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:22 Aux= 13:57:22 Message to Camera, serial 118644 queued 13:57:57 Received message from Master: op=PointingHead serial=118656 13:57:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:57:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:57:58 Point started: ret=0 13:57:58 point_skyscan result=0 13:57:59 Check angles 13:57:59 SkyScan query 13:57:59 SkyScan query done: ret=0 az=152.955<-10197 ze=8.64<-11424 Statuses=0009 0009 13:57:59 Msec=0 True Az=152.955 Ze=8.64 Az status=0009 Ze status=0009 13:57:59 Check angles 13:57:59 SkyScan query 13:58:00 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.3<-12820 Statuses=0009 0009 13:58:00 Msec=750 True Az=135.435 Ze=-12.3 Az status=0009 Ze status=0009 13:58:00 Check angles 13:58:00 SkyScan query 13:58:01 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.69<-14246 Statuses=0009 0009 13:58:01 Msec=1500 True Az=117.6 Ze=-33.69 Az status=0009 Ze status=0009 13:58:01 Check angles 13:58:01 SkyScan query 13:58:01 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 13:58:01 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 13:58:02 Check angles 13:58:02 SkyScan query 13:58:02 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:58:02 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:58:02 Check angles 13:58:02 SkyScan query 13:58:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:58:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:58:03 Message to Master queued w/err=0: serial=118656 error=0 13:58:08 Received message from Master: op=Filter serial=118657 13:58:08 Color wheel filter change from 0 to 0 13:58:08 FLIGetFilterPos err=0 currentPosition=0 13:58:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:08 Filter is already there-color wheel unchanged 13:58:08 Received message from Master: op=Shutter serial=118658 13:58:08 Shutter LASER close 13:58:08 Received message from Camera: op=State serial=118660 13:58:08 GetSingleValue result=40 Value=cccccccc 13:58:08 SkyScan query 13:58:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:58:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:09 Parameters OK 13:58:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:09 Set A/D data flow result=40 13:58:09 Set A/D channel type result=40 13:58:09 Set A/D encoding result=40 13:58:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:09 Set channel filter=0.000000e+000 result=40 13:58:09 Config A/D Result=40 13:58:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:09 Get A/D filter: -9.255963e+061 result=40 13:58:09 Get A/D value=-858993460 result=40 13:58:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:09 Parameters OK 13:58:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:09 Set A/D data flow result=40 13:58:09 Set A/D channel type result=40 13:58:09 Set A/D encoding result=40 13:58:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:09 Set channel filter=0.000000e+000 result=40 13:58:09 Config A/D Result=40 13:58:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:09 Get A/D filter: -9.255963e+061 result=40 13:58:09 Get A/D value=-858993460 result=40 13:58:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:09 Aux= 13:58:09 Message to Camera, serial 118660 queued 13:58:46 Received message from Master: op=PointingHead serial=118673 13:58:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:58:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:58:46 Point started: ret=0 13:58:46 point_skyscan result=0 13:58:47 Check angles 13:58:47 SkyScan query 13:58:47 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.33<-17422 Statuses=0009 0009 13:58:47 Msec=0 True Az=109.005 Ze=-81.33 Az status=0009 Ze status=0009 13:58:47 Check angles 13:58:47 SkyScan query 13:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.72<-18848 Statuses=0008 0009 13:58:48 Msec=750 True Az=112.995 Ze=-102.72 Az status=0008 Ze status=0009 13:58:48 Check angles 13:58:48 SkyScan query 13:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.11<-20274 Statuses=0008 0009 13:58:49 Msec=1500 True Az=112.995 Ze=-124.11 Az status=0008 Ze status=0009 13:58:49 Check angles 13:58:49 SkyScan query 13:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.515<-21701 Statuses=0008 0009 13:58:49 Msec=2250 True Az=112.995 Ze=-145.515 Az status=0008 Ze status=0009 13:58:50 Check angles 13:58:50 SkyScan query 13:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.455<-23097 Statuses=0008 0009 13:58:50 Msec=3000 True Az=112.995 Ze=-166.455 Az status=0008 Ze status=0009 13:58:50 Check angles 13:58:50 SkyScan query 13:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:58:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:58:51 Message to Master queued w/err=0: serial=118673 error=0 13:58:56 Received message from Master: op=Filter serial=118674 13:58:56 Color wheel filter change from 0 to 0 13:58:56 FLIGetFilterPos err=0 currentPosition=0 13:58:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:56 Filter is already there-color wheel unchanged 13:58:56 Received message from Master: op=Shutter serial=118675 13:58:56 Shutter LASER open 13:58:56 Received message from Camera: op=State serial=118677 13:58:56 GetSingleValue result=40 Value=cccccccc 13:58:56 SkyScan query 13:58:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:58:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:57 Parameters OK 13:58:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:57 Set A/D data flow result=40 13:58:57 Set A/D channel type result=40 13:58:57 Set A/D encoding result=40 13:58:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:57 Set channel filter=0.000000e+000 result=40 13:58:57 Config A/D Result=40 13:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:57 Get A/D filter: -9.255963e+061 result=40 13:58:57 Get A/D value=-858993460 result=40 13:58:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:57 Parameters OK 13:58:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:57 Set A/D data flow result=40 13:58:57 Set A/D channel type result=40 13:58:57 Set A/D encoding result=40 13:58:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:57 Set channel filter=0.000000e+000 result=40 13:58:57 Config A/D Result=40 13:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:57 Get A/D filter: -9.255963e+061 result=40 13:58:57 Get A/D value=-858993460 result=40 13:58:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:57 Aux= 13:58:57 Message to Camera, serial 118677 queued 13:59:05 Received message from Master: op=Shutter serial=118687 13:59:05 Shutter LASER close 13:59:06 Received message from Master: op=PointingHead serial=118691 13:59:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:59:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:59:06 Point started: ret=0 13:59:06 point_skyscan result=0 13:59:07 Check angles 13:59:07 SkyScan query 13:59:07 SkyScan query done: ret=0 az=90.09<-6006 ze=157.455<-1503 Statuses=0009 0009 13:59:07 Msec=0 True Az=90.09 Ze=157.455 Az status=0009 Ze status=0009 13:59:08 Check angles 13:59:08 SkyScan query 13:59:08 SkyScan query done: ret=0 az=72.24<-4816 ze=136.02<-2932 Statuses=0009 0009 13:59:08 Msec=750 True Az=72.24 Ze=136.02 Az status=0009 Ze status=0009 13:59:08 Check angles 13:59:08 SkyScan query 13:59:09 SkyScan query done: ret=0 az=54.795<-3653 ze=115.095<-4327 Statuses=0009 0009 13:59:09 Msec=1500 True Az=54.795 Ze=115.095 Az status=0009 Ze status=0009 13:59:09 Check angles 13:59:09 SkyScan query 13:59:10 SkyScan query done: ret=0 az=40.92<-2728 ze=94.11<-5726 Statuses=0009 0009 13:59:10 Msec=2250 True Az=40.92 Ze=94.11 Az status=0009 Ze status=0009 13:59:10 Check angles 13:59:10 SkyScan query 13:59:10 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 13:59:10 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 13:59:11 Check angles 13:59:11 SkyScan query 13:59:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 13:59:11 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 13:59:11 Check angles 13:59:11 SkyScan query 13:59:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:59:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:59:12 Message to Master queued w/err=0: serial=118691 error=0 13:59:17 Received message from Master: op=Filter serial=118692 13:59:17 Color wheel filter change from 0 to 0 13:59:17 FLIGetFilterPos err=0 currentPosition=0 13:59:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:17 Filter is already there-color wheel unchanged 13:59:17 Received message from Master: op=Shutter serial=118693 13:59:17 Shutter LASER close 13:59:17 Received message from Camera: op=State serial=118695 13:59:17 GetSingleValue result=40 Value=cccccccc 13:59:17 SkyScan query 13:59:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:59:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:18 Parameters OK 13:59:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:18 Set A/D data flow result=40 13:59:18 Set A/D channel type result=40 13:59:18 Set A/D encoding result=40 13:59:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:18 Set channel filter=0.000000e+000 result=40 13:59:18 Config A/D Result=40 13:59:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:18 Get A/D filter: -9.255963e+061 result=40 13:59:18 Get A/D value=-858993460 result=40 13:59:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:18 Parameters OK 13:59:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:18 Set A/D data flow result=40 13:59:18 Set A/D channel type result=40 13:59:18 Set A/D encoding result=40 13:59:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:18 Set channel filter=0.000000e+000 result=40 13:59:18 Config A/D Result=40 13:59:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:18 Get A/D filter: -9.255963e+061 result=40 13:59:18 Get A/D value=-858993460 result=40 13:59:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:18 Aux= 13:59:18 Message to Camera, serial 118695 queued 13:59:55 Received message from Master: op=PointingHead serial=118708 13:59:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:59:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:59:55 Point started: ret=0 13:59:55 point_skyscan result=0 13:59:56 Check angles 13:59:56 SkyScan query 13:59:56 SkyScan query done: ret=0 az=64.44<-4296 ze=66.555<-7563 Statuses=0009 0008 13:59:56 Msec=0 True Az=64.44 Ze=66.555 Az status=0009 Ze status=0008 13:59:57 Check angles 13:59:57 SkyScan query 13:59:57 SkyScan query done: ret=0 az=81.78<-5452 ze=66.51<-7566 Statuses=0009 0008 13:59:57 Msec=750 True Az=81.78 Ze=66.51 Az status=0009 Ze status=0008 13:59:57 Check angles 13:59:57 SkyScan query 13:59:58 SkyScan query done: ret=0 az=99.735<-6649 ze=66.495<-7567 Statuses=0009 0008 13:59:58 Msec=1500 True Az=99.735 Ze=66.495 Az status=0009 Ze status=0008 13:59:58 Check angles 13:59:58 SkyScan query 13:59:59 SkyScan query done: ret=0 az=117.24<-7816 ze=66.495<-7567 Statuses=0009 0008 13:59:59 Msec=2250 True Az=117.24 Ze=66.495 Az status=0009 Ze status=0008 13:59:59 Check angles 13:59:59 SkyScan query 13:59:59 SkyScan query done: ret=0 az=134.7<-8980 ze=66.495<-7567 Statuses=0009 0008 13:59:59 Msec=3000 True Az=134.7 Ze=66.495 Az status=0009 Ze status=0008 14:00:00 Check angles 14:00:00 SkyScan query 14:00:00 SkyScan query done: ret=0 az=152.025<-10135 ze=66.495<-7567 Statuses=0009 0008 14:00:00 Msec=3750 True Az=152.025 Ze=66.495 Az status=0009 Ze status=0008 14:00:00 Check angles 14:00:00 SkyScan query 14:00:01 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:00:01 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:00:01 Message to Master queued w/err=0: serial=118708 error=0 14:00:06 Received message from Master: op=Filter serial=118709 14:00:06 Color wheel filter change from 0 to 0 14:00:06 FLIGetFilterPos err=0 currentPosition=0 14:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:06 Filter is already there-color wheel unchanged 14:00:06 Received message from Master: op=Shutter serial=118710 14:00:06 Shutter LASER close 14:00:06 Received message from Camera: op=State serial=118712 14:00:06 GetSingleValue result=40 Value=cccccccc 14:00:06 SkyScan query 14:00:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:07 Parameters OK 14:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:07 Set A/D data flow result=40 14:00:07 Set A/D channel type result=40 14:00:07 Set A/D encoding result=40 14:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:07 Set channel filter=0.000000e+000 result=40 14:00:07 Config A/D Result=40 14:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:07 Get A/D filter: -9.255963e+061 result=40 14:00:07 Get A/D value=-858993460 result=40 14:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:07 Parameters OK 14:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:07 Set A/D data flow result=40 14:00:07 Set A/D channel type result=40 14:00:07 Set A/D encoding result=40 14:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:07 Set channel filter=0.000000e+000 result=40 14:00:07 Config A/D Result=40 14:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:07 Get A/D filter: -9.255963e+061 result=40 14:00:07 Get A/D value=-858993460 result=40 14:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:07 Aux= 14:00:07 Message to Camera, serial 118712 queued 14:00:44 Received message from Master: op=PointingHead serial=118725 14:00:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:00:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:00:44 Point started: ret=0 14:00:44 point_skyscan result=0 14:00:45 Check angles 14:00:45 SkyScan query 14:00:45 SkyScan query done: ret=0 az=135.12<-9008 ze=36.84<-9544 Statuses=0009 0009 14:00:45 Msec=0 True Az=135.12 Ze=36.84 Az status=0009 Ze status=0009 14:00:45 Check angles 14:00:45 SkyScan query 14:00:46 SkyScan query done: ret=0 az=117.285<-7819 ze=15.495<-10967 Statuses=0009 0009 14:00:46 Msec=750 True Az=117.285 Ze=15.495 Az status=0009 Ze status=0009 14:00:46 Check angles 14:00:46 SkyScan query 14:00:47 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.49<-12366 Statuses=0009 0009 14:00:47 Msec=1500 True Az=99.885 Ze=-5.49 Az status=0009 Ze status=0009 14:00:47 Check angles 14:00:47 SkyScan query 14:00:47 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.43<-13762 Statuses=0009 0009 14:00:47 Msec=2250 True Az=82.29 Ze=-26.43 Az status=0009 Ze status=0009 14:00:48 Check angles 14:00:48 SkyScan query 14:00:48 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.58<-14572 Statuses=0009 0008 14:00:48 Msec=3000 True Az=64.92 Ze=-38.58 Az status=0009 Ze status=0008 14:00:48 Check angles 14:00:48 SkyScan query 14:00:49 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.52<-14568 Statuses=0009 0008 14:00:49 Msec=3750 True Az=47.445 Ze=-38.52 Az status=0009 Ze status=0008 14:00:49 Check angles 14:00:49 SkyScan query 14:00:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:00:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:00:50 Message to Master queued w/err=0: serial=118725 error=0 14:00:55 Received message from Master: op=Filter serial=118726 14:00:55 Color wheel filter change from 0 to 0 14:00:55 FLIGetFilterPos err=0 currentPosition=0 14:00:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:55 Filter is already there-color wheel unchanged 14:00:55 Received message from Master: op=Shutter serial=118727 14:00:55 Shutter LASER close 14:00:55 Received message from Camera: op=State serial=118729 14:00:55 GetSingleValue result=40 Value=cccccccc 14:00:55 SkyScan query 14:00:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:00:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:56 Parameters OK 14:00:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:56 Set A/D data flow result=40 14:00:56 Set A/D channel type result=40 14:00:56 Set A/D encoding result=40 14:00:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:56 Set channel filter=0.000000e+000 result=40 14:00:56 Config A/D Result=40 14:00:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:56 Get A/D filter: -9.255963e+061 result=40 14:00:56 Get A/D value=-858993460 result=40 14:00:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:56 Parameters OK 14:00:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:56 Set A/D data flow result=40 14:00:56 Set A/D channel type result=40 14:00:56 Set A/D encoding result=40 14:00:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:56 Set channel filter=0.000000e+000 result=40 14:00:56 Config A/D Result=40 14:00:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:56 Get A/D filter: -9.255963e+061 result=40 14:00:56 Get A/D value=-858993460 result=40 14:00:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:56 Aux= 14:00:56 Message to Camera, serial 118729 queued 14:01:32 Received message from Master: op=PointingHead serial=118742 14:01:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:01:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:01:33 Point started: ret=0 14:01:33 point_skyscan result=0 14:01:33 Check angles 14:01:33 SkyScan query 14:01:34 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.385<-16559 Statuses=0009 0009 14:01:34 Msec=0 True Az=64.065 Ze=-68.385 Az status=0009 Ze status=0009 14:01:34 Check angles 14:01:34 SkyScan query 14:01:35 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.385<-17959 Statuses=0009 0009 14:01:35 Msec=750 True Az=81.6 Ze=-89.385 Az status=0009 Ze status=0009 14:01:35 Check angles 14:01:35 SkyScan query 14:01:36 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.745<-19383 Statuses=0009 0009 14:01:36 Msec=1500 True Az=99.45 Ze=-110.745 Az status=0009 Ze status=0009 14:01:36 Check angles 14:01:36 SkyScan query 14:01:36 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.67<-20778 Statuses=0009 0009 14:01:36 Msec=2250 True Az=116.85 Ze=-131.67 Az status=0009 Ze status=0009 14:01:36 Check angles 14:01:36 SkyScan query 14:01:37 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 14:01:37 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 14:01:37 Check angles 14:01:37 SkyScan query 14:01:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 14:01:38 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 14:01:38 Message to Master queued w/err=0: serial=118742 error=0 14:01:43 Received message from Master: op=Filter serial=118743 14:01:43 Color wheel filter change from 0 to 0 14:01:43 FLIGetFilterPos err=0 currentPosition=0 14:01:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:43 Filter is already there-color wheel unchanged 14:01:43 Received message from Master: op=Shutter serial=118744 14:01:43 Shutter LASER close 14:01:43 Received message from Camera: op=State serial=118746 14:01:43 GetSingleValue result=40 Value=cccccccc 14:01:43 SkyScan query 14:01:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:01:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:44 Parameters OK 14:01:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:44 Set A/D data flow result=40 14:01:44 Set A/D channel type result=40 14:01:44 Set A/D encoding result=40 14:01:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:44 Set channel filter=0.000000e+000 result=40 14:01:44 Config A/D Result=40 14:01:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:44 Get A/D filter: -9.255963e+061 result=40 14:01:44 Get A/D value=-858993460 result=40 14:01:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:44 Parameters OK 14:01:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:44 Set A/D data flow result=40 14:01:44 Set A/D channel type result=40 14:01:44 Set A/D encoding result=40 14:01:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:44 Set channel filter=0.000000e+000 result=40 14:01:44 Config A/D Result=40 14:01:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:44 Get A/D filter: -9.255963e+061 result=40 14:01:44 Get A/D value=-858993460 result=40 14:01:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:44 Aux= 14:01:44 Message to Camera, serial 118746 queued 14:02:20 Received message from Master: op=PointingHead serial=118759 14:02:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:02:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:02:21 Point started: ret=0 14:02:21 point_skyscan result=0 14:02:22 Check angles 14:02:22 SkyScan query 14:02:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 14:02:22 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 14:02:22 Check angles 14:02:22 SkyScan query 14:02:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:02:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:02:23 Message to Master queued w/err=0: serial=118759 error=0 14:02:28 Received message from Master: op=Filter serial=118760 14:02:28 Color wheel filter change from 0 to 0 14:02:28 FLIGetFilterPos err=0 currentPosition=0 14:02:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:28 Filter is already there-color wheel unchanged 14:02:28 Received message from Master: op=Shutter serial=118761 14:02:28 Shutter LASER open 14:02:28 Received message from Camera: op=State serial=118763 14:02:28 GetSingleValue result=40 Value=cccccccc 14:02:28 SkyScan query 14:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:02:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:29 Parameters OK 14:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:29 Set A/D data flow result=40 14:02:29 Set A/D channel type result=40 14:02:29 Set A/D encoding result=40 14:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:29 Set channel filter=0.000000e+000 result=40 14:02:29 Config A/D Result=40 14:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:29 Get A/D filter: -9.255963e+061 result=40 14:02:29 Get A/D value=-858993460 result=40 14:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:29 Parameters OK 14:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:29 Set A/D data flow result=40 14:02:29 Set A/D channel type result=40 14:02:29 Set A/D encoding result=40 14:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:29 Set channel filter=0.000000e+000 result=40 14:02:29 Config A/D Result=40 14:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:29 Get A/D filter: -9.255963e+061 result=40 14:02:29 Get A/D value=-858993460 result=40 14:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:29 Aux= 14:02:29 Message to Camera, serial 118763 queued 14:02:36 Received message from Master: op=Shutter serial=118772 14:02:36 Shutter LASER close 14:02:37 Received message from Master: op=PointingHead serial=118776 14:02:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:02:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:02:37 Point started: ret=0 14:02:37 point_skyscan result=0 14:02:38 Check angles 14:02:38 SkyScan query 14:02:39 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.01<-21534 Statuses=0009 0009 14:02:39 Msec=0 True Az=136.17 Ze=-143.01 Az status=0009 Ze status=0009 14:02:39 Check angles 14:02:39 SkyScan query 14:02:39 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.07<-20138 Statuses=0009 0009 14:02:39 Msec=750 True Az=153.63 Ze=-122.07 Az status=0009 Ze status=0009 14:02:39 Check angles 14:02:39 SkyScan query 14:02:40 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.145<-18743 Statuses=0009 0009 14:02:40 Msec=1500 True Az=171.24 Ze=-101.145 Az status=0009 Ze status=0009 14:02:40 Check angles 14:02:40 SkyScan query 14:02:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.71<-17314 Statuses=0008 0009 14:02:41 Msec=2250 True Az=176.01 Ze=-79.71 Az status=0008 Ze status=0009 14:02:41 Check angles 14:02:41 SkyScan query 14:02:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.74<-15916 Statuses=0008 0009 14:02:42 Msec=3000 True Az=176.01 Ze=-58.74 Az status=0008 Ze status=0009 14:02:42 Check angles 14:02:42 SkyScan query 14:02:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:02:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:02:42 Message to Master queued w/err=0: serial=118776 error=0 14:02:47 Received message from Master: op=Filter serial=118777 14:02:47 Color wheel filter change from 0 to 0 14:02:47 FLIGetFilterPos err=0 currentPosition=0 14:02:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:47 Filter is already there-color wheel unchanged 14:02:47 Received message from Master: op=Shutter serial=118778 14:02:47 Shutter LASER close 14:02:48 Received message from Camera: op=State serial=118780 14:02:48 GetSingleValue result=40 Value=cccccccc 14:02:48 SkyScan query 14:02:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:02:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:48 Parameters OK 14:02:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:48 Set A/D data flow result=40 14:02:48 Set A/D channel type result=40 14:02:48 Set A/D encoding result=40 14:02:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:48 Set channel filter=0.000000e+000 result=40 14:02:48 Config A/D Result=40 14:02:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:48 Get A/D filter: -9.255963e+061 result=40 14:02:48 Get A/D value=-858993460 result=40 14:02:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:48 Parameters OK 14:02:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:48 Set A/D data flow result=40 14:02:48 Set A/D channel type result=40 14:02:48 Set A/D encoding result=40 14:02:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:48 Set channel filter=0.000000e+000 result=40 14:02:48 Config A/D Result=40 14:02:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:48 Get A/D filter: -9.255963e+061 result=40 14:02:48 Get A/D value=-858993460 result=40 14:02:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:48 Aux= 14:02:48 Message to Camera, serial 118780 queued 14:03:25 Received message from Master: op=PointingHead serial=118793 14:03:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:03:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:03:25 Point started: ret=0 14:03:25 point_skyscan result=0 14:03:26 Check angles 14:03:26 SkyScan query 14:03:27 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.345<-13423 Statuses=0009 0009 14:03:27 Msec=0 True Az=152.715 Ze=-21.345 Az status=0009 Ze status=0009 14:03:27 Check angles 14:03:27 SkyScan query 14:03:28 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.39<-12026 Statuses=0009 0009 14:03:28 Msec=750 True Az=135.21 Ze=-0.39 Az status=0009 Ze status=0009 14:03:28 Check angles 14:03:28 SkyScan query 14:03:28 SkyScan query done: ret=0 az=117.675<-7845 ze=20.55<-10630 Statuses=0009 0009 14:03:28 Msec=1500 True Az=117.675 Ze=20.55 Az status=0009 Ze status=0009 14:03:28 Check angles 14:03:28 SkyScan query 14:03:29 SkyScan query done: ret=0 az=100.305<-6687 ze=41.535<-9231 Statuses=0009 0009 14:03:29 Msec=2250 True Az=100.305 Ze=41.535 Az status=0009 Ze status=0009 14:03:29 Check angles 14:03:29 SkyScan query 14:03:30 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 14:03:30 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 14:03:30 Check angles 14:03:30 SkyScan query 14:03:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:03:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:03:31 Message to Master queued w/err=0: serial=118793 error=0 14:03:36 Received message from Master: op=Filter serial=118794 14:03:36 Color wheel filter change from 0 to 0 14:03:36 FLIGetFilterPos err=0 currentPosition=0 14:03:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:36 Filter is already there-color wheel unchanged 14:03:36 Received message from Master: op=Shutter serial=118795 14:03:36 Shutter LASER close 14:03:36 Received message from Camera: op=State serial=118797 14:03:36 GetSingleValue result=40 Value=cccccccc 14:03:36 SkyScan query 14:03:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:03:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:36 Parameters OK 14:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:36 Set A/D data flow result=40 14:03:36 Set A/D channel type result=40 14:03:36 Set A/D encoding result=40 14:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:36 Set channel filter=0.000000e+000 result=40 14:03:36 Config A/D Result=40 14:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:36 Get A/D filter: -9.255963e+061 result=40 14:03:36 Get A/D value=-858993460 result=40 14:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:36 Parameters OK 14:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:36 Set A/D data flow result=40 14:03:36 Set A/D channel type result=40 14:03:36 Set A/D encoding result=40 14:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:36 Set channel filter=0.000000e+000 result=40 14:03:36 Config A/D Result=40 14:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:36 Get A/D filter: -9.255963e+061 result=40 14:03:36 Get A/D value=-858993460 result=40 14:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:36 Aux= 14:03:36 Message to Camera, serial 118797 queued 14:04:13 Received message from Master: op=PointingHead serial=118810 14:04:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:04:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:04:13 Point started: ret=0 14:04:13 point_skyscan result=0 14:04:14 Check angles 14:04:14 SkyScan query 14:04:15 SkyScan query done: ret=0 az=109.095<-7273 ze=38.475<-9435 Statuses=0009 0008 14:04:15 Msec=0 True Az=109.095 Ze=38.475 Az status=0009 Ze status=0008 14:04:15 Check angles 14:04:15 SkyScan query 14:04:16 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 14:04:16 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 14:04:16 Check angles 14:04:16 SkyScan query 14:04:16 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 14:04:16 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 14:04:17 Check angles 14:04:17 SkyScan query 14:04:17 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 14:04:17 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 14:04:17 Check angles 14:04:17 SkyScan query 14:04:18 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:04:18 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:04:18 Check angles 14:04:18 SkyScan query 14:04:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:04:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:04:19 Message to Master queued w/err=0: serial=118810 error=0 14:04:24 Received message from Master: op=Filter serial=118811 14:04:24 Color wheel filter change from 0 to 0 14:04:24 FLIGetFilterPos err=0 currentPosition=0 14:04:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:24 Filter is already there-color wheel unchanged 14:04:24 Received message from Master: op=Shutter serial=118812 14:04:24 Shutter LASER close 14:04:24 Received message from Camera: op=State serial=118814 14:04:24 GetSingleValue result=40 Value=cccccccc 14:04:24 SkyScan query 14:04:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:04:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:24 Parameters OK 14:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:24 Set A/D data flow result=40 14:04:24 Set A/D channel type result=40 14:04:24 Set A/D encoding result=40 14:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:24 Set channel filter=0.000000e+000 result=40 14:04:24 Config A/D Result=40 14:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:24 Get A/D filter: -9.255963e+061 result=40 14:04:24 Get A/D value=-858993460 result=40 14:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:24 Parameters OK 14:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:24 Set A/D data flow result=40 14:04:24 Set A/D channel type result=40 14:04:24 Set A/D encoding result=40 14:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:24 Set channel filter=0.000000e+000 result=40 14:04:24 Config A/D Result=40 14:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:24 Get A/D filter: -9.255963e+061 result=40 14:04:24 Get A/D value=-858993460 result=40 14:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:24 Aux= 14:04:24 Message to Camera, serial 118814 queued 14:05:00 Received message from Master: op=PointingHead serial=118826 14:05:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:05:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:05:01 Point started: ret=0 14:05:01 point_skyscan result=0 14:05:01 Check angles 14:05:01 SkyScan query 14:05:02 SkyScan query done: ret=0 az=152.97<-10198 ze=8.7<-11420 Statuses=0009 0009 14:05:02 Msec=0 True Az=152.97 Ze=8.7 Az status=0009 Ze status=0009 14:05:02 Check angles 14:05:02 SkyScan query 14:05:03 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.255<-12817 Statuses=0009 0009 14:05:03 Msec=750 True Az=135.435 Ze=-12.255 Az status=0009 Ze status=0009 14:05:03 Check angles 14:05:03 SkyScan query 14:05:03 SkyScan query done: ret=0 az=118.035<-7869 ze=-33.195<-14213 Statuses=0009 0009 14:05:03 Msec=1500 True Az=118.035 Ze=-33.195 Az status=0009 Ze status=0009 14:05:04 Check angles 14:05:04 SkyScan query 14:05:04 SkyScan query done: ret=0 az=100.635<-6709 ze=-51.525<-15435 Statuses=0009 0009 14:05:04 Msec=2250 True Az=100.635 Ze=-51.525 Az status=0009 Ze status=0009 14:05:04 Check angles 14:05:04 SkyScan query 14:05:05 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:05:05 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:05:05 Check angles 14:05:05 SkyScan query 14:05:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:05:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:05:06 Message to Master queued w/err=0: serial=118826 error=0 14:05:11 Received message from Master: op=Filter serial=118827 14:05:11 Color wheel filter change from 0 to 0 14:05:11 FLIGetFilterPos err=0 currentPosition=0 14:05:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:11 Filter is already there-color wheel unchanged 14:05:11 Received message from Master: op=Shutter serial=118828 14:05:11 Shutter LASER close 14:05:11 Received message from Camera: op=State serial=118830 14:05:11 GetSingleValue result=40 Value=cccccccc 14:05:11 SkyScan query 14:05:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:05:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:12 Parameters OK 14:05:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:12 Set A/D data flow result=40 14:05:12 Set A/D channel type result=40 14:05:12 Set A/D encoding result=40 14:05:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:12 Set channel filter=0.000000e+000 result=40 14:05:12 Config A/D Result=40 14:05:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:12 Get A/D filter: -9.255963e+061 result=40 14:05:12 Get A/D value=-858993460 result=40 14:05:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:12 Parameters OK 14:05:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:12 Set A/D data flow result=40 14:05:12 Set A/D channel type result=40 14:05:12 Set A/D encoding result=40 14:05:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:12 Set channel filter=0.000000e+000 result=40 14:05:12 Config A/D Result=40 14:05:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:12 Get A/D filter: -9.255963e+061 result=40 14:05:12 Get A/D value=-858993460 result=40 14:05:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:12 Aux= 14:05:12 Message to Camera, serial 118830 queued 14:05:48 Received message from Master: op=PointingHead serial=118843 14:05:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:05:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:05:49 Point started: ret=0 14:05:49 point_skyscan result=0 14:05:49 Check angles 14:05:49 SkyScan query 14:05:50 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.21<-17414 Statuses=0009 0009 14:05:50 Msec=0 True Az=108.93 Ze=-81.21 Az status=0009 Ze status=0009 14:05:50 Check angles 14:05:50 SkyScan query 14:05:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.6<-18840 Statuses=0008 0009 14:05:51 Msec=750 True Az=112.995 Ze=-102.6 Az status=0008 Ze status=0009 14:05:51 Check angles 14:05:51 SkyScan query 14:05:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.99<-20266 Statuses=0008 0009 14:05:52 Msec=1500 True Az=112.995 Ze=-123.99 Az status=0008 Ze status=0009 14:05:52 Check angles 14:05:52 SkyScan query 14:05:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 14:05:52 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 14:05:53 Check angles 14:05:53 SkyScan query 14:05:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 14:05:53 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 14:05:53 Check angles 14:05:53 SkyScan query 14:05:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:05:54 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:05:54 Message to Master queued w/err=0: serial=118843 error=0 14:05:59 Received message from Master: op=Filter serial=118844 14:05:59 Color wheel filter change from 0 to 0 14:05:59 FLIGetFilterPos err=0 currentPosition=0 14:05:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:59 Filter is already there-color wheel unchanged 14:05:59 Received message from Master: op=Shutter serial=118845 14:05:59 Shutter LASER open 14:05:59 Received message from Camera: op=State serial=118847 14:05:59 GetSingleValue result=40 Value=cccccccc 14:05:59 SkyScan query 14:06:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:06:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:00 Parameters OK 14:06:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:00 Set A/D data flow result=40 14:06:00 Set A/D channel type result=40 14:06:00 Set A/D encoding result=40 14:06:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:00 Set channel filter=0.000000e+000 result=40 14:06:00 Config A/D Result=40 14:06:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:00 Get A/D filter: -9.255963e+061 result=40 14:06:00 Get A/D value=-858993460 result=40 14:06:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:00 Parameters OK 14:06:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:00 Set A/D data flow result=40 14:06:00 Set A/D channel type result=40 14:06:00 Set A/D encoding result=40 14:06:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:00 Set channel filter=0.000000e+000 result=40 14:06:00 Config A/D Result=40 14:06:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:00 Get A/D filter: -9.255963e+061 result=40 14:06:00 Get A/D value=-858993460 result=40 14:06:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:00 Aux= 14:06:00 Message to Camera, serial 118847 queued 14:06:08 Received message from Master: op=Shutter serial=118857 14:06:08 Shutter LASER close 14:06:09 Received message from Master: op=PointingHead serial=118861 14:06:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:06:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-13 14:06:09] 14:06:09 Point started: ret=0 14:06:09 point_skyscan result=0 14:06:10 Check angles 14:06:10 SkyScan query 14:06:10 SkyScan query done: ret=0 az=88.5<-5900 ze=155.52<-1632 Statuses=0009 0009 14:06:10 Msec=0 True Az=88.5 Ze=155.52 Az status=0009 Ze status=0009 14:06:11 Check angles 14:06:11 SkyScan query 14:06:11 SkyScan query done: ret=0 az=70.995<-4733 ze=134.535<-3031 Statuses=0009 0009 14:06:11 Msec=750 True Az=70.995 Ze=134.535 Az status=0009 Ze status=0009 14:06:11 Check angles 14:06:11 SkyScan query 14:06:12 SkyScan query done: ret=0 az=53.685<-3579 ze=113.61<-4426 Statuses=0009 0009 14:06:12 Msec=1500 True Az=53.685 Ze=113.61 Az status=0009 Ze status=0009 14:06:12 Check angles 14:06:12 SkyScan query 14:06:13 SkyScan query done: ret=0 az=41.025<-2735 ze=92.625<-5825 Statuses=0009 0009 14:06:13 Msec=2250 True Az=41.025 Ze=92.625 Az status=0009 Ze status=0009 14:06:13 Check angles 14:06:13 SkyScan query 14:06:13 SkyScan query done: ret=0 az=40.995<-2733 ze=71.685<-7221 Statuses=0008 0009 14:06:13 Msec=3000 True Az=40.995 Ze=71.685 Az status=0008 Ze status=0009 14:06:14 Check angles 14:06:14 SkyScan query 14:06:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.945<-8537 Statuses=0008 0009 14:06:14 Msec=3750 True Az=40.995 Ze=51.945 Az status=0008 Ze status=0009 14:06:14 Check angles 14:06:14 SkyScan query 14:06:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:06:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:06:15 Message to Master queued w/err=0: serial=118861 error=0 14:06:20 Received message from Master: op=Filter serial=118862 14:06:20 Color wheel filter change from 0 to 0 14:06:20 FLIGetFilterPos err=0 currentPosition=0 14:06:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:20 Filter is already there-color wheel unchanged 14:06:20 Received message from Master: op=Shutter serial=118863 14:06:20 Shutter LASER close 14:06:20 Received message from Camera: op=State serial=118865 14:06:20 GetSingleValue result=40 Value=cccccccc 14:06:20 SkyScan query 14:06:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:06:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:21 Parameters OK 14:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:21 Set A/D data flow result=40 14:06:21 Set A/D channel type result=40 14:06:21 Set A/D encoding result=40 14:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:21 Set channel filter=0.000000e+000 result=40 14:06:21 Config A/D Result=40 14:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:21 Get A/D filter: -9.255963e+061 result=40 14:06:21 Get A/D value=-858993460 result=40 14:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:21 Parameters OK 14:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:21 Set A/D data flow result=40 14:06:21 Set A/D channel type result=40 14:06:21 Set A/D encoding result=40 14:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:21 Set channel filter=0.000000e+000 result=40 14:06:21 Config A/D Result=40 14:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:21 Get A/D filter: -9.255963e+061 result=40 14:06:21 Get A/D value=-858993460 result=40 14:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:21 Aux= 14:06:21 Message to Camera, serial 118865 queued 14:06:58 Received message from Master: op=PointingHead serial=118878 14:06:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:06:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:06:58 Point started: ret=0 14:06:58 point_skyscan result=0 14:06:59 Check angles 14:06:59 SkyScan query 14:06:59 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 14:06:59 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 14:07:00 Check angles 14:07:00 SkyScan query 14:07:00 SkyScan query done: ret=0 az=82.08<-5472 ze=66.495<-7567 Statuses=0009 0008 14:07:00 Msec=750 True Az=82.08 Ze=66.495 Az status=0009 Ze status=0008 14:07:00 Check angles 14:07:00 SkyScan query 14:07:01 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 14:07:01 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 14:07:01 Check angles 14:07:01 SkyScan query 14:07:02 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 14:07:02 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 14:07:02 Check angles 14:07:02 SkyScan query 14:07:02 SkyScan query done: ret=0 az=134.505<-8967 ze=66.495<-7567 Statuses=0009 0008 14:07:02 Msec=3000 True Az=134.505 Ze=66.495 Az status=0009 Ze status=0008 14:07:03 Check angles 14:07:03 SkyScan query 14:07:03 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 14:07:03 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 14:07:03 Check angles 14:07:03 SkyScan query 14:07:04 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:07:04 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:07:04 Message to Master queued w/err=0: serial=118878 error=0 14:07:09 Received message from Master: op=Filter serial=118879 14:07:09 Color wheel filter change from 0 to 0 14:07:09 FLIGetFilterPos err=0 currentPosition=0 14:07:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:09 Filter is already there-color wheel unchanged 14:07:09 Received message from Master: op=Shutter serial=118880 14:07:09 Shutter LASER close 14:07:09 Received message from Camera: op=State serial=118882 14:07:09 GetSingleValue result=40 Value=cccccccc 14:07:09 SkyScan query 14:07:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:07:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:10 Parameters OK 14:07:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:10 Set A/D data flow result=40 14:07:10 Set A/D channel type result=40 14:07:10 Set A/D encoding result=40 14:07:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:10 Set channel filter=0.000000e+000 result=40 14:07:10 Config A/D Result=40 14:07:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:10 Get A/D filter: -9.255963e+061 result=40 14:07:10 Get A/D value=-858993460 result=40 14:07:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:10 Parameters OK 14:07:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:10 Set A/D data flow result=40 14:07:10 Set A/D channel type result=40 14:07:10 Set A/D encoding result=40 14:07:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:10 Set channel filter=0.000000e+000 result=40 14:07:10 Config A/D Result=40 14:07:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:10 Get A/D filter: -9.255963e+061 result=40 14:07:10 Get A/D value=-858993460 result=40 14:07:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:10 Aux= 14:07:10 Message to Camera, serial 118882 queued 14:07:47 Received message from Master: op=PointingHead serial=118895 14:07:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:07:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:07:47 Point started: ret=0 14:07:47 point_skyscan result=0 14:07:48 Check angles 14:07:48 SkyScan query 14:07:48 SkyScan query done: ret=0 az=134.49<-8966 ze=36.18<-9588 Statuses=0009 0009 14:07:48 Msec=0 True Az=134.49 Ze=36.18 Az status=0009 Ze status=0009 14:07:48 Check angles 14:07:48 SkyScan query 14:07:49 SkyScan query done: ret=0 az=117.015<-7801 ze=15.255<-10983 Statuses=0009 0009 14:07:49 Msec=750 True Az=117.015 Ze=15.255 Az status=0009 Ze status=0009 14:07:49 Check angles 14:07:49 SkyScan query 14:07:50 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.715<-12381 Statuses=0009 0009 14:07:50 Msec=1500 True Az=99.66 Ze=-5.715 Az status=0009 Ze status=0009 14:07:50 Check angles 14:07:50 SkyScan query 14:07:51 SkyScan query done: ret=0 az=82.065<-5471 ze=-26.67<-13778 Statuses=0009 0009 14:07:51 Msec=2250 True Az=82.065 Ze=-26.67 Az status=0009 Ze status=0009 14:07:51 Check angles 14:07:51 SkyScan query 14:07:51 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.565<-14571 Statuses=0009 0008 14:07:51 Msec=3000 True Az=64.62 Ze=-38.565 Az status=0009 Ze status=0008 14:07:51 Check angles 14:07:51 SkyScan query 14:07:52 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.535<-14569 Statuses=0009 0008 14:07:52 Msec=3750 True Az=47.19 Ze=-38.535 Az status=0009 Ze status=0008 14:07:52 Check angles 14:07:52 SkyScan query 14:07:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:07:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:07:53 Message to Master queued w/err=0: serial=118895 error=0 14:07:58 Received message from Master: op=Filter serial=118896 14:07:58 Color wheel filter change from 0 to 0 14:07:58 FLIGetFilterPos err=0 currentPosition=0 14:07:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:58 Filter is already there-color wheel unchanged 14:07:58 Received message from Master: op=Shutter serial=118897 14:07:58 Shutter LASER close 14:07:58 Received message from Camera: op=State serial=118899 14:07:58 GetSingleValue result=40 Value=cccccccc 14:07:58 SkyScan query 14:07:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:07:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:59 Parameters OK 14:07:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:59 Set A/D data flow result=40 14:07:59 Set A/D channel type result=40 14:07:59 Set A/D encoding result=40 14:07:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:59 Set channel filter=0.000000e+000 result=40 14:07:59 Config A/D Result=40 14:07:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:59 Get A/D filter: -9.255963e+061 result=40 14:07:59 Get A/D value=-858993460 result=40 14:07:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:59 Parameters OK 14:07:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:59 Set A/D data flow result=40 14:07:59 Set A/D channel type result=40 14:07:59 Set A/D encoding result=40 14:07:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:59 Set channel filter=0.000000e+000 result=40 14:07:59 Config A/D Result=40 14:07:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:59 Get A/D filter: -9.255963e+061 result=40 14:07:59 Get A/D value=-858993460 result=40 14:07:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:59 Aux= 14:07:59 Message to Camera, serial 118899 queued 14:08:35 Received message from Master: op=PointingHead serial=118912 14:08:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:08:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:08:36 Point started: ret=0 14:08:36 point_skyscan result=0 14:08:36 Check angles 14:08:36 SkyScan query 14:08:37 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.49<-16566 Statuses=0009 0009 14:08:37 Msec=0 True Az=64.2 Ze=-68.49 Az status=0009 Ze status=0009 14:08:37 Check angles 14:08:37 SkyScan query 14:08:38 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.505<-17967 Statuses=0009 0009 14:08:38 Msec=750 True Az=81.63 Ze=-89.505 Az status=0009 Ze status=0009 14:08:38 Check angles 14:08:38 SkyScan query 14:08:39 SkyScan query done: ret=0 az=99.525<-6635 ze=-110.88<-19392 Statuses=0009 0009 14:08:39 Msec=1500 True Az=99.525 Ze=-110.88 Az status=0009 Ze status=0009 14:08:39 Check angles 14:08:39 SkyScan query 14:08:39 SkyScan query done: ret=0 az=117.39<-7826 ze=-132.21<-20814 Statuses=0009 0009 14:08:39 Msec=2250 True Az=117.39 Ze=-132.21 Az status=0009 Ze status=0009 14:08:40 Check angles 14:08:40 SkyScan query 14:08:40 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 14:08:40 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 14:08:40 Check angles 14:08:40 SkyScan query 14:08:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:08:41 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:08:41 Message to Master queued w/err=0: serial=118912 error=0 14:08:46 Received message from Master: op=Filter serial=118913 14:08:46 Color wheel filter change from 0 to 0 14:08:46 FLIGetFilterPos err=0 currentPosition=0 14:08:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:46 Filter is already there-color wheel unchanged 14:08:46 Received message from Master: op=Shutter serial=118914 14:08:46 Shutter LASER close 14:08:46 Received message from Camera: op=State serial=118916 14:08:46 GetSingleValue result=40 Value=cccccccc 14:08:46 SkyScan query 14:08:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:08:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:47 Parameters OK 14:08:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:47 Set A/D data flow result=40 14:08:47 Set A/D channel type result=40 14:08:47 Set A/D encoding result=40 14:08:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:47 Set channel filter=0.000000e+000 result=40 14:08:47 Config A/D Result=40 14:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:47 Get A/D filter: -9.255963e+061 result=40 14:08:47 Get A/D value=-858993460 result=40 14:08:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:47 Parameters OK 14:08:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:47 Set A/D data flow result=40 14:08:47 Set A/D channel type result=40 14:08:47 Set A/D encoding result=40 14:08:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:47 Set channel filter=0.000000e+000 result=40 14:08:47 Config A/D Result=40 14:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:47 Get A/D filter: -9.255963e+061 result=40 14:08:47 Get A/D value=-858993460 result=40 14:08:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:47 Aux= 14:08:47 Message to Camera, serial 118916 queued 14:09:23 Received message from Master: op=PointingHead serial=118929 14:09:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:09:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:09:24 Point started: ret=0 14:09:24 point_skyscan result=0 14:09:25 Check angles 14:09:25 SkyScan query 14:09:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.42<-23428 Statuses=0009 0009 14:09:25 Msec=0 True Az=113.01 Ze=-171.42 Az status=0009 Ze status=0009 14:09:25 Check angles 14:09:25 SkyScan query 14:09:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:09:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:09:26 Message to Master queued w/err=0: serial=118929 error=0 14:09:31 Received message from Master: op=Filter serial=118930 14:09:31 Color wheel filter change from 0 to 0 14:09:31 FLIGetFilterPos err=0 currentPosition=0 14:09:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:31 Filter is already there-color wheel unchanged 14:09:31 Received message from Master: op=Shutter serial=118931 14:09:31 Shutter LASER open 14:09:31 Received message from Camera: op=State serial=118933 14:09:31 GetSingleValue result=40 Value=cccccccc 14:09:31 SkyScan query 14:09:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:09:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:32 Parameters OK 14:09:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:32 Set A/D data flow result=40 14:09:32 Set A/D channel type result=40 14:09:32 Set A/D encoding result=40 14:09:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:32 Set channel filter=0.000000e+000 result=40 14:09:32 Config A/D Result=40 14:09:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:32 Get A/D filter: -9.255963e+061 result=40 14:09:32 Get A/D value=-858993460 result=40 14:09:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:32 Parameters OK 14:09:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:32 Set A/D data flow result=40 14:09:32 Set A/D channel type result=40 14:09:32 Set A/D encoding result=40 14:09:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:32 Set channel filter=0.000000e+000 result=40 14:09:32 Config A/D Result=40 14:09:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:32 Get A/D filter: -9.255963e+061 result=40 14:09:32 Get A/D value=-858993460 result=40 14:09:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:32 Aux= 14:09:32 Message to Camera, serial 118933 queued 14:09:40 Received message from Master: op=Shutter serial=118943 14:09:40 Shutter LASER close 14:09:41 Received message from Master: op=PointingHead serial=118947 14:09:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:09:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:09:41 Point started: ret=0 14:09:41 point_skyscan result=0 14:09:42 Check angles 14:09:42 SkyScan query 14:09:43 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.205<-21547 Statuses=0009 0009 14:09:43 Msec=0 True Az=135.975 Ze=-143.205 Az status=0009 Ze status=0009 14:09:43 Check angles 14:09:43 SkyScan query 14:09:43 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.25<-20150 Statuses=0009 0009 14:09:43 Msec=750 True Az=153.435 Ze=-122.25 Az status=0009 Ze status=0009 14:09:43 Check angles 14:09:43 SkyScan query 14:09:44 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.355<-18757 Statuses=0009 0009 14:09:44 Msec=1500 True Az=170.97 Ze=-101.355 Az status=0009 Ze status=0009 14:09:44 Check angles 14:09:44 SkyScan query 14:09:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.355<-17357 Statuses=0008 0009 14:09:45 Msec=2250 True Az=176.01 Ze=-80.355 Az status=0008 Ze status=0009 14:09:45 Check angles 14:09:45 SkyScan query 14:09:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.415<-15961 Statuses=0008 0009 14:09:46 Msec=3000 True Az=176.01 Ze=-59.415 Az status=0008 Ze status=0009 14:09:46 Check angles 14:09:46 SkyScan query 14:09:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:09:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:09:46 Message to Master queued w/err=0: serial=118947 error=0 14:09:51 Received message from Master: op=Filter serial=118948 14:09:51 Color wheel filter change from 0 to 0 14:09:51 FLIGetFilterPos err=0 currentPosition=0 14:09:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:51 Filter is already there-color wheel unchanged 14:09:51 Received message from Master: op=Shutter serial=118949 14:09:51 Shutter LASER close 14:09:52 Received message from Camera: op=State serial=118951 14:09:52 GetSingleValue result=40 Value=cccccccc 14:09:52 SkyScan query 14:09:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:09:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:52 Parameters OK 14:09:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:52 Set A/D data flow result=40 14:09:52 Set A/D channel type result=40 14:09:52 Set A/D encoding result=40 14:09:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:52 Set channel filter=0.000000e+000 result=40 14:09:52 Config A/D Result=40 14:09:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:52 Get A/D filter: -9.255963e+061 result=40 14:09:52 Get A/D value=-858993460 result=40 14:09:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:52 Parameters OK 14:09:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:52 Set A/D data flow result=40 14:09:52 Set A/D channel type result=40 14:09:52 Set A/D encoding result=40 14:09:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:52 Set channel filter=0.000000e+000 result=40 14:09:52 Config A/D Result=40 14:09:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:52 Get A/D filter: -9.255963e+061 result=40 14:09:52 Get A/D value=-858993460 result=40 14:09:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:52 Aux= 14:09:52 Message to Camera, serial 118951 queued 14:10:29 Received message from Master: op=PointingHead serial=118964 14:10:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:10:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:10:29 Point started: ret=0 14:10:29 point_skyscan result=0 14:10:30 Check angles 14:10:30 SkyScan query 14:10:31 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.525<-13435 Statuses=0009 0009 14:10:31 Msec=0 True Az=152.73 Ze=-21.525 Az status=0009 Ze status=0009 14:10:31 Check angles 14:10:31 SkyScan query 14:10:31 SkyScan query done: ret=0 az=134.835<-8989 ze=-0.105<-12007 Statuses=0009 0009 14:10:31 Msec=750 True Az=134.835 Ze=-0.105 Az status=0009 Ze status=0009 14:10:32 Check angles 14:10:32 SkyScan query 14:10:32 SkyScan query done: ret=0 az=117.375<-7825 ze=20.85<-10610 Statuses=0009 0009 14:10:32 Msec=1500 True Az=117.375 Ze=20.85 Az status=0009 Ze status=0009 14:10:32 Check angles 14:10:32 SkyScan query 14:10:33 SkyScan query done: ret=0 az=99.975<-6665 ze=41.79<-9214 Statuses=0009 0009 14:10:33 Msec=2250 True Az=99.975 Ze=41.79 Az status=0009 Ze status=0009 14:10:33 Check angles 14:10:33 SkyScan query 14:10:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 14:10:34 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 14:10:34 Check angles 14:10:34 SkyScan query 14:10:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:10:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:10:34 Message to Master queued w/err=0: serial=118964 error=0 14:10:39 Received message from Master: op=Filter serial=118965 14:10:39 Color wheel filter change from 0 to 0 14:10:39 FLIGetFilterPos err=0 currentPosition=0 14:10:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:39 Filter is already there-color wheel unchanged 14:10:40 Received message from Master: op=Shutter serial=118966 14:10:40 Shutter LASER close 14:10:40 Received message from Camera: op=State serial=118968 14:10:40 GetSingleValue result=40 Value=cccccccc 14:10:40 SkyScan query 14:10:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:10:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:40 Parameters OK 14:10:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:40 Set A/D data flow result=40 14:10:40 Set A/D channel type result=40 14:10:40 Set A/D encoding result=40 14:10:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:40 Set channel filter=0.000000e+000 result=40 14:10:40 Config A/D Result=40 14:10:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:40 Get A/D filter: -9.255963e+061 result=40 14:10:40 Get A/D value=-858993460 result=40 14:10:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:40 Parameters OK 14:10:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:40 Set A/D data flow result=40 14:10:40 Set A/D channel type result=40 14:10:40 Set A/D encoding result=40 14:10:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:40 Set channel filter=0.000000e+000 result=40 14:10:40 Config A/D Result=40 14:10:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:40 Get A/D filter: -9.255963e+061 result=40 14:10:40 Get A/D value=-858993460 result=40 14:10:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:40 Aux= 14:10:40 Message to Camera, serial 118968 queued 14:11:17 Received message from Master: op=PointingHead serial=118981 14:11:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:11:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:11:17 Point started: ret=0 14:11:17 point_skyscan result=0 14:11:18 Check angles 14:11:18 SkyScan query 14:11:19 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 14:11:19 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 14:11:19 Check angles 14:11:19 SkyScan query 14:11:20 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 14:11:20 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 14:11:20 Check angles 14:11:20 SkyScan query 14:11:20 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 14:11:20 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 14:11:20 Check angles 14:11:20 SkyScan query 14:11:21 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 14:11:21 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 14:11:21 Check angles 14:11:21 SkyScan query 14:11:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:11:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:11:22 Check angles 14:11:22 SkyScan query 14:11:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:11:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:11:23 Message to Master queued w/err=0: serial=118981 error=0 14:11:28 Received message from Master: op=Filter serial=118982 14:11:28 Color wheel filter change from 0 to 0 14:11:28 FLIGetFilterPos err=0 currentPosition=0 14:11:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:28 Filter is already there-color wheel unchanged 14:11:28 Received message from Master: op=Shutter serial=118983 14:11:28 Shutter LASER close 14:11:28 Received message from Camera: op=State serial=118985 14:11:28 GetSingleValue result=40 Value=cccccccc 14:11:28 SkyScan query 14:11:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:11:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:28 Parameters OK 14:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:28 Set A/D data flow result=40 14:11:28 Set A/D channel type result=40 14:11:28 Set A/D encoding result=40 14:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:28 Set channel filter=0.000000e+000 result=40 14:11:28 Config A/D Result=40 14:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:28 Get A/D filter: -9.255963e+061 result=40 14:11:28 Get A/D value=-858993460 result=40 14:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:28 Parameters OK 14:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:28 Set A/D data flow result=40 14:11:28 Set A/D channel type result=40 14:11:28 Set A/D encoding result=40 14:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:28 Set channel filter=0.000000e+000 result=40 14:11:28 Config A/D Result=40 14:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:28 Get A/D filter: -9.255963e+061 result=40 14:11:28 Get A/D value=-858993460 result=40 14:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:28 Aux= 14:11:28 Message to Camera, serial 118985 queued 14:12:05 Received message from Master: op=PointingHead serial=118998 14:12:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:12:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:12:06 Point started: ret=0 14:12:06 point_skyscan result=0 14:12:06 Check angles 14:12:06 SkyScan query 14:12:07 SkyScan query done: ret=0 az=152.73<-10182 ze=8.28<-11448 Statuses=0009 0009 14:12:07 Msec=0 True Az=152.73 Ze=8.28 Az status=0009 Ze status=0009 14:12:07 Check angles 14:12:07 SkyScan query 14:12:08 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.66<-12844 Statuses=0009 0009 14:12:08 Msec=750 True Az=135.15 Ze=-12.66 Az status=0009 Ze status=0009 14:12:08 Check angles 14:12:08 SkyScan query 14:12:09 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.615<-14241 Statuses=0009 0009 14:12:09 Msec=1500 True Az=117.63 Ze=-33.615 Az status=0009 Ze status=0009 14:12:09 Check angles 14:12:09 SkyScan query 14:12:09 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 14:12:09 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 14:12:09 Check angles 14:12:09 SkyScan query 14:12:10 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:12:10 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:12:10 Check angles 14:12:10 SkyScan query 14:12:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:12:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:12:11 Message to Master queued w/err=0: serial=118998 error=0 14:12:16 Received message from Master: op=Filter serial=118999 14:12:16 Color wheel filter change from 0 to 0 14:12:16 FLIGetFilterPos err=0 currentPosition=0 14:12:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:16 Filter is already there-color wheel unchanged 14:12:16 Received message from Master: op=Shutter serial=119000 14:12:16 Shutter LASER close 14:12:16 Received message from Camera: op=State serial=119002 14:12:16 GetSingleValue result=40 Value=cccccccc 14:12:16 SkyScan query 14:12:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:12:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:17 Parameters OK 14:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:17 Set A/D data flow result=40 14:12:17 Set A/D channel type result=40 14:12:17 Set A/D encoding result=40 14:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:17 Set channel filter=0.000000e+000 result=40 14:12:17 Config A/D Result=40 14:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:17 Get A/D filter: -9.255963e+061 result=40 14:12:17 Get A/D value=-858993460 result=40 14:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:17 Parameters OK 14:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:17 Set A/D data flow result=40 14:12:17 Set A/D channel type result=40 14:12:17 Set A/D encoding result=40 14:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:17 Set channel filter=0.000000e+000 result=40 14:12:17 Config A/D Result=40 14:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:17 Get A/D filter: -9.255963e+061 result=40 14:12:17 Get A/D value=-858993460 result=40 14:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:17 Aux= 14:12:17 Message to Camera, serial 119002 queued 14:12:53 Received message from Master: op=PointingHead serial=119015 14:12:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:12:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:12:54 Point started: ret=0 14:12:54 point_skyscan result=0 14:12:54 Check angles 14:12:54 SkyScan query 14:12:55 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.57<-17438 Statuses=0009 0009 14:12:55 Msec=0 True Az=109.2 Ze=-81.57 Az status=0009 Ze status=0009 14:12:55 Check angles 14:12:55 SkyScan query 14:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.93<-18862 Statuses=0008 0009 14:12:56 Msec=750 True Az=112.995 Ze=-102.93 Az status=0008 Ze status=0009 14:12:56 Check angles 14:12:56 SkyScan query 14:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 14:12:57 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 14:12:57 Check angles 14:12:57 SkyScan query 14:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 14:12:57 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 14:12:58 Check angles 14:12:58 SkyScan query 14:12:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.2<-23080 Statuses=0008 0009 14:12:58 Msec=3000 True Az=112.995 Ze=-166.2 Az status=0008 Ze status=0009 14:12:58 Check angles 14:12:58 SkyScan query 14:12:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:12:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:12:59 Message to Master queued w/err=0: serial=119015 error=0 14:13:04 Received message from Master: op=Filter serial=119016 14:13:04 Color wheel filter change from 0 to 0 14:13:04 FLIGetFilterPos err=0 currentPosition=0 14:13:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:04 Filter is already there-color wheel unchanged 14:13:04 Received message from Master: op=Shutter serial=119017 14:13:04 Shutter LASER open 14:13:04 Received message from Camera: op=State serial=119019 14:13:04 GetSingleValue result=40 Value=cccccccc 14:13:04 SkyScan query 14:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:13:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:05 Parameters OK 14:13:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:05 Set A/D data flow result=40 14:13:05 Set A/D channel type result=40 14:13:05 Set A/D encoding result=40 14:13:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:05 Set channel filter=0.000000e+000 result=40 14:13:05 Config A/D Result=40 14:13:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:05 Get A/D filter: -9.255963e+061 result=40 14:13:05 Get A/D value=-858993460 result=40 14:13:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:05 Parameters OK 14:13:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:05 Set A/D data flow result=40 14:13:05 Set A/D channel type result=40 14:13:05 Set A/D encoding result=40 14:13:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:05 Set channel filter=0.000000e+000 result=40 14:13:05 Config A/D Result=40 14:13:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:05 Get A/D filter: -9.255963e+061 result=40 14:13:05 Get A/D value=-858993460 result=40 14:13:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:05 Aux= 14:13:05 Message to Camera, serial 119019 queued 14:13:13 Received message from Master: op=Shutter serial=119029 14:13:13 Shutter LASER close 14:13:14 Received message from Master: op=PointingHead serial=119033 14:13:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:13:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:13:14 Point started: ret=0 14:13:14 point_skyscan result=0 14:13:15 Check angles 14:13:15 SkyScan query 14:13:15 SkyScan query done: ret=0 az=89.85<-5990 ze=157.245<-1517 Statuses=0009 0009 14:13:15 Msec=0 True Az=89.85 Ze=157.245 Az status=0009 Ze status=0009 14:13:15 Check angles 14:13:15 SkyScan query 14:13:16 SkyScan query done: ret=0 az=72.3<-4820 ze=136.245<-2917 Statuses=0009 0009 14:13:16 Msec=750 True Az=72.3 Ze=136.245 Az status=0009 Ze status=0009 14:13:16 Check angles 14:13:16 SkyScan query 14:13:17 SkyScan query done: ret=0 az=54.72<-3648 ze=114.87<-4342 Statuses=0009 0009 14:13:17 Msec=1500 True Az=54.72 Ze=114.87 Az status=0009 Ze status=0009 14:13:17 Check angles 14:13:17 SkyScan query 14:13:18 SkyScan query done: ret=0 az=40.98<-2732 ze=93.51<-5766 Statuses=0009 0009 14:13:18 Msec=2250 True Az=40.98 Ze=93.51 Az status=0009 Ze status=0009 14:13:18 Check angles 14:13:18 SkyScan query 14:13:18 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 14:13:18 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 14:13:19 Check angles 14:13:19 SkyScan query 14:13:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.095<-8527 Statuses=0008 0009 14:13:19 Msec=3750 True Az=40.995 Ze=52.095 Az status=0008 Ze status=0009 14:13:19 Check angles 14:13:19 SkyScan query 14:13:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:13:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:13:20 Message to Master queued w/err=0: serial=119033 error=0 14:13:25 Received message from Master: op=Filter serial=119034 14:13:25 Color wheel filter change from 0 to 0 14:13:25 FLIGetFilterPos err=0 currentPosition=0 14:13:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:25 Filter is already there-color wheel unchanged 14:13:25 Received message from Master: op=Shutter serial=119035 14:13:25 Shutter LASER close 14:13:25 Received message from Camera: op=State serial=119037 14:13:25 GetSingleValue result=40 Value=cccccccc 14:13:25 SkyScan query 14:13:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:13:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:26 Parameters OK 14:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:26 Set A/D data flow result=40 14:13:26 Set A/D channel type result=40 14:13:26 Set A/D encoding result=40 14:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:26 Set channel filter=0.000000e+000 result=40 14:13:26 Config A/D Result=40 14:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:26 Get A/D filter: -9.255963e+061 result=40 14:13:26 Get A/D value=-858993460 result=40 14:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:26 Parameters OK 14:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:26 Set A/D data flow result=40 14:13:26 Set A/D channel type result=40 14:13:26 Set A/D encoding result=40 14:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:26 Set channel filter=0.000000e+000 result=40 14:13:26 Config A/D Result=40 14:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:26 Get A/D filter: -9.255963e+061 result=40 14:13:26 Get A/D value=-858993460 result=40 14:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:26 Aux= 14:13:26 Message to Camera, serial 119037 queued 14:14:03 Received message from Master: op=PointingHead serial=119050 14:14:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:14:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:14:03 Point started: ret=0 14:14:03 point_skyscan result=0 14:14:04 Check angles 14:14:04 SkyScan query 14:14:04 SkyScan query done: ret=0 az=63.9<-4260 ze=66.555<-7563 Statuses=0009 0008 14:14:04 Msec=0 True Az=63.9 Ze=66.555 Az status=0009 Ze status=0008 14:14:04 Check angles 14:14:04 SkyScan query 14:14:05 SkyScan query done: ret=0 az=81.375<-5425 ze=66.495<-7567 Statuses=0009 0008 14:14:05 Msec=750 True Az=81.375 Ze=66.495 Az status=0009 Ze status=0008 14:14:05 Check angles 14:14:05 SkyScan query 14:14:06 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 14:14:06 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 14:14:06 Check angles 14:14:06 SkyScan query 14:14:07 SkyScan query done: ret=0 az=116.7<-7780 ze=66.495<-7567 Statuses=0009 0008 14:14:07 Msec=2250 True Az=116.7 Ze=66.495 Az status=0009 Ze status=0008 14:14:07 Check angles 14:14:07 SkyScan query 14:14:07 SkyScan query done: ret=0 az=134.175<-8945 ze=66.495<-7567 Statuses=0009 0008 14:14:07 Msec=3000 True Az=134.175 Ze=66.495 Az status=0009 Ze status=0008 14:14:08 Check angles 14:14:08 SkyScan query 14:14:08 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 14:14:08 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 14:14:08 Check angles 14:14:08 SkyScan query 14:14:09 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:14:09 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:14:09 Message to Master queued w/err=0: serial=119050 error=0 14:14:14 Received message from Master: op=Filter serial=119051 14:14:14 Color wheel filter change from 0 to 0 14:14:14 FLIGetFilterPos err=0 currentPosition=0 14:14:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:14 Filter is already there-color wheel unchanged 14:14:14 Received message from Master: op=Shutter serial=119052 14:14:14 Shutter LASER close 14:14:14 Received message from Camera: op=State serial=119054 14:14:14 GetSingleValue result=40 Value=cccccccc 14:14:14 SkyScan query 14:14:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:14:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:15 Parameters OK 14:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:15 Set A/D data flow result=40 14:14:15 Set A/D channel type result=40 14:14:15 Set A/D encoding result=40 14:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:15 Set channel filter=0.000000e+000 result=40 14:14:15 Config A/D Result=40 14:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:15 Get A/D filter: -9.255963e+061 result=40 14:14:15 Get A/D value=-858993460 result=40 14:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:15 Parameters OK 14:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:15 Set A/D data flow result=40 14:14:15 Set A/D channel type result=40 14:14:15 Set A/D encoding result=40 14:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:15 Set channel filter=0.000000e+000 result=40 14:14:15 Config A/D Result=40 14:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:15 Get A/D filter: -9.255963e+061 result=40 14:14:15 Get A/D value=-858993460 result=40 14:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:15 Aux= 14:14:15 Message to Camera, serial 119054 queued 14:14:51 Received message from Master: op=PointingHead serial=119067 14:14:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:14:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:14:52 Point started: ret=0 14:14:52 point_skyscan result=0 14:14:53 Check angles 14:14:53 SkyScan query 14:14:53 SkyScan query done: ret=0 az=134.58<-8972 ze=36.255<-9583 Statuses=0009 0009 14:14:53 Msec=0 True Az=134.58 Ze=36.255 Az status=0009 Ze status=0009 14:14:53 Check angles 14:14:53 SkyScan query 14:14:54 SkyScan query done: ret=0 az=116.79<-7786 ze=14.85<-11010 Statuses=0009 0009 14:14:54 Msec=750 True Az=116.79 Ze=14.85 Az status=0009 Ze status=0009 14:14:54 Check angles 14:14:54 SkyScan query 14:14:55 SkyScan query done: ret=0 az=99.36<-6624 ze=-6.12<-12408 Statuses=0009 0009 14:14:55 Msec=1500 True Az=99.36 Ze=-6.12 Az status=0009 Ze status=0009 14:14:55 Check angles 14:14:55 SkyScan query 14:14:55 SkyScan query done: ret=0 az=81.93<-5462 ze=-27.075<-13805 Statuses=0009 0009 14:14:55 Msec=2250 True Az=81.93 Ze=-27.075 Az status=0009 Ze status=0009 14:14:56 Check angles 14:14:56 SkyScan query 14:14:56 SkyScan query done: ret=0 az=64.41<-4294 ze=-38.565<-14571 Statuses=0009 0008 14:14:56 Msec=3000 True Az=64.41 Ze=-38.565 Az status=0009 Ze status=0008 14:14:56 Check angles 14:14:56 SkyScan query 14:14:57 SkyScan query done: ret=0 az=46.95<-3130 ze=-38.535<-14569 Statuses=0009 0008 14:14:57 Msec=3750 True Az=46.95 Ze=-38.535 Az status=0009 Ze status=0008 14:14:57 Check angles 14:14:57 SkyScan query 14:14:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:14:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:14:58 Message to Master queued w/err=0: serial=119067 error=0 14:15:03 Received message from Master: op=Filter serial=119068 14:15:03 Color wheel filter change from 0 to 0 14:15:03 FLIGetFilterPos err=0 currentPosition=0 14:15:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:03 Filter is already there-color wheel unchanged 14:15:03 Received message from Master: op=Shutter serial=119069 14:15:03 Shutter LASER close 14:15:03 Received message from Camera: op=State serial=119071 14:15:03 GetSingleValue result=40 Value=cccccccc 14:15:03 SkyScan query 14:15:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:03 Parameters OK 14:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:03 Set A/D data flow result=40 14:15:03 Set A/D channel type result=40 14:15:03 Set A/D encoding result=40 14:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:03 Set channel filter=0.000000e+000 result=40 14:15:03 Config A/D Result=40 14:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:03 Get A/D filter: -9.255963e+061 result=40 14:15:03 Get A/D value=-858993460 result=40 14:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:03 Parameters OK 14:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:03 Set A/D data flow result=40 14:15:03 Set A/D channel type result=40 14:15:03 Set A/D encoding result=40 14:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:03 Set channel filter=0.000000e+000 result=40 14:15:03 Config A/D Result=40 14:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:03 Get A/D filter: -9.255963e+061 result=40 14:15:03 Get A/D value=-858993460 result=40 14:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:03 Aux= 14:15:03 Message to Camera, serial 119071 queued 14:15:27 Received message from Master: op=Identify serial=119072 14:15:40 Received message from Master: op=PointingHead serial=119087 14:15:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:15:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:15:41 Point started: ret=0 14:15:41 point_skyscan result=0 14:15:41 Check angles 14:15:41 SkyScan query 14:15:42 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.61<-16574 Statuses=0009 0009 14:15:42 Msec=0 True Az=64.215 Ze=-68.61 Az status=0009 Ze status=0009 14:15:42 Check angles 14:15:42 SkyScan query 14:15:43 SkyScan query done: ret=0 az=81.69<-5446 ze=-89.58<-17972 Statuses=0009 0009 14:15:43 Msec=750 True Az=81.69 Ze=-89.58 Az status=0009 Ze status=0009 14:15:43 Check angles 14:15:43 SkyScan query 14:15:44 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.55<-19370 Statuses=0009 0009 14:15:44 Msec=1500 True Az=99.105 Ze=-110.55 Az status=0009 Ze status=0009 14:15:44 Check angles 14:15:44 SkyScan query 14:15:44 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.445<-20763 Statuses=0009 0009 14:15:44 Msec=2250 True Az=116.61 Ze=-131.445 Az status=0009 Ze status=0009 14:15:44 Check angles 14:15:44 SkyScan query 14:15:45 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 14:15:45 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 14:15:45 Check angles 14:15:45 SkyScan query 14:15:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:15:46 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:15:46 Message to Master queued w/err=0: serial=119087 error=0 14:15:51 Received message from Master: op=Filter serial=119088 14:15:51 Color wheel filter change from 0 to 0 14:15:51 FLIGetFilterPos err=0 currentPosition=0 14:15:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:51 Filter is already there-color wheel unchanged 14:15:51 Received message from Master: op=Shutter serial=119089 14:15:51 Shutter LASER close 14:15:51 Received message from Camera: op=State serial=119091 14:15:51 GetSingleValue result=40 Value=cccccccc 14:15:51 SkyScan query 14:15:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:15:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:52 Parameters OK 14:15:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:52 Set A/D data flow result=40 14:15:52 Set A/D channel type result=40 14:15:52 Set A/D encoding result=40 14:15:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:52 Set channel filter=0.000000e+000 result=40 14:15:52 Config A/D Result=40 14:15:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:52 Get A/D filter: -9.255963e+061 result=40 14:15:52 Get A/D value=-858993460 result=40 14:15:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:52 Parameters OK 14:15:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:52 Set A/D data flow result=40 14:15:52 Set A/D channel type result=40 14:15:52 Set A/D encoding result=40 14:15:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:52 Set channel filter=0.000000e+000 result=40 14:15:52 Config A/D Result=40 14:15:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:52 Get A/D filter: -9.255963e+061 result=40 14:15:52 Get A/D value=-858993460 result=40 [UTC 2018-12-13 14:15:52] 14:15:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:52 Aux= 14:15:52 Message to Camera, serial 119091 queued [UTC 2018-12-13 14:15:52] 14:16:28 Received message from Master: op=PointingHead serial=119104 14:16:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:16:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:16:29 Point started: ret=0 14:16:29 point_skyscan result=0 14:16:29 Check angles 14:16:29 SkyScan query 14:16:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 14:16:30 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 14:16:30 Check angles 14:16:30 SkyScan query 14:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:16:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:16:31 Message to Master queued w/err=0: serial=119104 error=0 14:16:36 Received message from Master: op=Filter serial=119105 14:16:36 Color wheel filter change from 0 to 0 14:16:36 FLIGetFilterPos err=0 currentPosition=0 14:16:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:36 Filter is already there-color wheel unchanged 14:16:36 Received message from Master: op=Shutter serial=119106 14:16:36 Shutter LASER open 14:16:36 Received message from Camera: op=State serial=119108 14:16:36 GetSingleValue result=40 Value=cccccccc 14:16:36 SkyScan query 14:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:16:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:37 Parameters OK 14:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:37 Set A/D data flow result=40 14:16:37 Set A/D channel type result=40 14:16:37 Set A/D encoding result=40 14:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:37 Set channel filter=0.000000e+000 result=40 14:16:37 Config A/D Result=40 14:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:37 Get A/D filter: -9.255963e+061 result=40 14:16:37 Get A/D value=-858993460 result=40 14:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:37 Parameters OK 14:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:37 Set A/D data flow result=40 14:16:37 Set A/D channel type result=40 14:16:37 Set A/D encoding result=40 14:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:37 Set channel filter=0.000000e+000 result=40 14:16:37 Config A/D Result=40 14:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:37 Get A/D filter: -9.255963e+061 result=40 14:16:37 Get A/D value=-858993460 result=40 14:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:37 Aux= 14:16:37 Message to Camera, serial 119108 queued 14:16:44 Received message from Master: op=Shutter serial=119117 14:16:44 Shutter LASER close 14:16:45 Received message from Master: op=PointingHead serial=119121 14:16:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:16:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:16:45 Point started: ret=0 14:16:45 point_skyscan result=0 14:16:46 Check angles 14:16:46 SkyScan query 14:16:46 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.37<-21558 Statuses=0009 0009 14:16:46 Msec=0 True Az=135.9 Ze=-143.37 Az status=0009 Ze status=0009 14:16:47 Check angles 14:16:47 SkyScan query 14:16:47 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.415<-20161 Statuses=0009 0009 14:16:47 Msec=750 True Az=153.36 Ze=-122.415 Az status=0009 Ze status=0009 14:16:47 Check angles 14:16:47 SkyScan query 14:16:48 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.505<-18767 Statuses=0009 0009 14:16:48 Msec=1500 True Az=170.79 Ze=-101.505 Az status=0009 Ze status=0009 14:16:48 Check angles 14:16:48 SkyScan query 14:16:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.49<-17366 Statuses=0008 0009 14:16:49 Msec=2250 True Az=176.01 Ze=-80.49 Az status=0008 Ze status=0009 14:16:49 Check angles 14:16:49 SkyScan query 14:16:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.085<-15939 Statuses=0008 0009 14:16:49 Msec=3000 True Az=176.01 Ze=-59.085 Az status=0008 Ze status=0009 14:16:50 Check angles 14:16:50 SkyScan query 14:16:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:16:50 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:16:50 Message to Master queued w/err=0: serial=119121 error=0 14:16:55 Received message from Master: op=Filter serial=119122 14:16:55 Color wheel filter change from 0 to 0 14:16:55 FLIGetFilterPos err=0 currentPosition=0 14:16:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:55 Filter is already there-color wheel unchanged 14:16:55 Received message from Master: op=Shutter serial=119123 14:16:55 Shutter LASER close 14:16:56 Received message from Camera: op=State serial=119125 14:16:56 GetSingleValue result=40 Value=cccccccc 14:16:56 SkyScan query 14:16:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:16:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:56 Parameters OK 14:16:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:56 Set A/D data flow result=40 14:16:56 Set A/D channel type result=40 14:16:56 Set A/D encoding result=40 14:16:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:56 Set channel filter=0.000000e+000 result=40 14:16:56 Config A/D Result=40 14:16:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:56 Get A/D filter: -9.255963e+061 result=40 14:16:56 Get A/D value=-858993460 result=40 14:16:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:56 Parameters OK 14:16:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:56 Set A/D data flow result=40 14:16:56 Set A/D channel type result=40 14:16:56 Set A/D encoding result=40 14:16:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:56 Set channel filter=0.000000e+000 result=40 14:16:56 Config A/D Result=40 14:16:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:56 Get A/D filter: -9.255963e+061 result=40 14:16:56 Get A/D value=-858993460 result=40 14:16:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:56 Aux= 14:16:56 Message to Camera, serial 119125 queued 14:17:33 Received message from Master: op=PointingHead serial=119138 14:17:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:17:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:17:33 Point started: ret=0 14:17:33 point_skyscan result=0 14:17:34 Check angles 14:17:34 SkyScan query 14:17:35 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.05<-13470 Statuses=0009 0009 14:17:35 Msec=0 True Az=153.225 Ze=-22.05 Az status=0009 Ze status=0009 14:17:35 Check angles 14:17:35 SkyScan query 14:17:35 SkyScan query done: ret=0 az=135.81<-9054 ze=-1.08<-12072 Statuses=0009 0009 14:17:35 Msec=750 True Az=135.81 Ze=-1.08 Az status=0009 Ze status=0009 14:17:36 Check angles 14:17:36 SkyScan query 14:17:36 SkyScan query done: ret=0 az=118.245<-7883 ze=19.875<-10675 Statuses=0009 0009 14:17:36 Msec=1500 True Az=118.245 Ze=19.875 Az status=0009 Ze status=0009 14:17:36 Check angles 14:17:36 SkyScan query 14:17:37 SkyScan query done: ret=0 az=100.86<-6724 ze=40.83<-9278 Statuses=0009 0009 14:17:37 Msec=2250 True Az=100.86 Ze=40.83 Az status=0009 Ze status=0009 14:17:37 Check angles 14:17:37 SkyScan query 14:17:38 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 14:17:38 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 14:17:38 Check angles 14:17:38 SkyScan query 14:17:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:17:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:17:38 Message to Master queued w/err=0: serial=119138 error=0 14:17:43 Received message from Master: op=Filter serial=119139 14:17:43 Color wheel filter change from 0 to 0 14:17:43 FLIGetFilterPos err=0 currentPosition=0 14:17:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:43 Filter is already there-color wheel unchanged 14:17:44 Received message from Master: op=Shutter serial=119140 14:17:44 Shutter LASER close 14:17:44 Received message from Camera: op=State serial=119142 14:17:44 GetSingleValue result=40 Value=cccccccc 14:17:44 SkyScan query 14:17:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:17:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:44 Parameters OK 14:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:44 Set A/D data flow result=40 14:17:44 Set A/D channel type result=40 14:17:44 Set A/D encoding result=40 14:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:44 Set channel filter=0.000000e+000 result=40 14:17:44 Config A/D Result=40 14:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:44 Get A/D filter: -9.255963e+061 result=40 14:17:44 Get A/D value=-858993460 result=40 14:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:44 Parameters OK 14:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:44 Set A/D data flow result=40 14:17:44 Set A/D channel type result=40 14:17:44 Set A/D encoding result=40 14:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:44 Set channel filter=0.000000e+000 result=40 14:17:44 Config A/D Result=40 14:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:44 Get A/D filter: -9.255963e+061 result=40 14:17:44 Get A/D value=-858993460 result=40 14:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:44 Aux= 14:17:44 Message to Camera, serial 119142 queued 14:18:21 Received message from Master: op=PointingHead serial=119155 14:18:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:18:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:18:21 Point started: ret=0 14:18:21 point_skyscan result=0 14:18:22 Check angles 14:18:22 SkyScan query 14:18:23 SkyScan query done: ret=0 az=108.78<-7252 ze=38.475<-9435 Statuses=0009 0008 14:18:23 Msec=0 True Az=108.78 Ze=38.475 Az status=0009 Ze status=0008 14:18:23 Check angles 14:18:23 SkyScan query 14:18:23 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 14:18:23 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 14:18:24 Check angles 14:18:24 SkyScan query 14:18:24 SkyScan query done: ret=0 az=143.775<-9585 ze=38.505<-9433 Statuses=0009 0008 14:18:24 Msec=1500 True Az=143.775 Ze=38.505 Az status=0009 Ze status=0008 14:18:24 Check angles 14:18:24 SkyScan query 14:18:25 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 14:18:25 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 14:18:25 Check angles 14:18:25 SkyScan query 14:18:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:18:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:18:26 Check angles 14:18:26 SkyScan query 14:18:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:18:26 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:18:26 Message to Master queued w/err=0: serial=119155 error=0 14:18:31 Received message from Master: op=Filter serial=119156 14:18:31 Color wheel filter change from 0 to 0 14:18:31 FLIGetFilterPos err=0 currentPosition=0 14:18:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:31 Filter is already there-color wheel unchanged 14:18:32 Received message from Master: op=Shutter serial=119157 14:18:32 Shutter LASER close 14:18:32 Received message from Camera: op=State serial=119159 14:18:32 GetSingleValue result=40 Value=cccccccc 14:18:32 SkyScan query 14:18:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:32 Parameters OK 14:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:32 Set A/D data flow result=40 14:18:32 Set A/D channel type result=40 14:18:32 Set A/D encoding result=40 14:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:32 Set channel filter=0.000000e+000 result=40 14:18:32 Config A/D Result=40 14:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:32 Get A/D filter: -9.255963e+061 result=40 14:18:32 Get A/D value=-858993460 result=40 14:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:32 Parameters OK 14:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:32 Set A/D data flow result=40 14:18:32 Set A/D channel type result=40 14:18:32 Set A/D encoding result=40 14:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:32 Set channel filter=0.000000e+000 result=40 14:18:32 Config A/D Result=40 14:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:32 Get A/D filter: -9.255963e+061 result=40 14:18:32 Get A/D value=-858993460 result=40 14:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:32 Aux= 14:18:32 Message to Camera, serial 119159 queued 14:19:09 Received message from Master: op=PointingHead serial=119172 14:19:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:19:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:19:09 Point started: ret=0 14:19:09 point_skyscan result=0 14:19:10 Check angles 14:19:10 SkyScan query 14:19:11 SkyScan query done: ret=0 az=153.225<-10215 ze=9<-11400 Statuses=0009 0009 14:19:11 Msec=0 True Az=153.225 Ze=9 Az status=0009 Ze status=0009 14:19:11 Check angles 14:19:11 SkyScan query 14:19:12 SkyScan query done: ret=0 az=135.885<-9059 ze=-11.985<-12799 Statuses=0009 0009 14:19:12 Msec=750 True Az=135.885 Ze=-11.985 Az status=0009 Ze status=0009 14:19:12 Check angles 14:19:12 SkyScan query 14:19:12 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.865<-14191 Statuses=0009 0009 14:19:12 Msec=1500 True Az=118.26 Ze=-32.865 Az status=0009 Ze status=0009 14:19:12 Check angles 14:19:12 SkyScan query 14:19:13 SkyScan query done: ret=0 az=100.83<-6722 ze=-51.495<-15433 Statuses=0009 0009 14:19:13 Msec=2250 True Az=100.83 Ze=-51.495 Az status=0009 Ze status=0009 14:19:13 Check angles 14:19:13 SkyScan query 14:19:14 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:19:14 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:19:14 Check angles 14:19:14 SkyScan query 14:19:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:19:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:19:15 Message to Master queued w/err=0: serial=119172 error=0 14:19:20 Received message from Master: op=Filter serial=119173 14:19:20 Color wheel filter change from 0 to 0 14:19:20 FLIGetFilterPos err=0 currentPosition=0 14:19:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:20 Filter is already there-color wheel unchanged 14:19:20 Received message from Master: op=Shutter serial=119174 14:19:20 Shutter LASER close 14:19:20 Received message from Camera: op=State serial=119176 14:19:20 GetSingleValue result=40 Value=cccccccc 14:19:20 SkyScan query 14:19:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:19:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:20 Parameters OK 14:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:20 Set A/D data flow result=40 14:19:20 Set A/D channel type result=40 14:19:20 Set A/D encoding result=40 14:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:20 Set channel filter=0.000000e+000 result=40 14:19:20 Config A/D Result=40 14:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:20 Get A/D filter: -9.255963e+061 result=40 14:19:20 Get A/D value=-858993460 result=40 14:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:20 Parameters OK 14:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:20 Set A/D data flow result=40 14:19:20 Set A/D channel type result=40 14:19:20 Set A/D encoding result=40 14:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:20 Set channel filter=0.000000e+000 result=40 14:19:20 Config A/D Result=40 14:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:20 Get A/D filter: -9.255963e+061 result=40 14:19:20 Get A/D value=-858993460 result=40 14:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:20 Aux= 14:19:20 Message to Camera, serial 119176 queued 14:19:57 Received message from Master: op=PointingHead serial=119189 14:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:19:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:19:58 Point started: ret=0 14:19:58 point_skyscan result=0 14:19:58 Check angles 14:19:58 SkyScan query 14:19:59 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.06<-17404 Statuses=0009 0009 14:19:59 Msec=0 True Az=108.795 Ze=-81.06 Az status=0009 Ze status=0009 14:19:59 Check angles 14:19:59 SkyScan query 14:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 14:20:00 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 14:20:00 Check angles 14:20:00 SkyScan query 14:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.075<-20205 Statuses=0008 0009 14:20:00 Msec=1500 True Az=112.995 Ze=-123.075 Az status=0008 Ze status=0009 14:20:01 Check angles 14:20:01 SkyScan query 14:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 14:20:01 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 14:20:01 Check angles 14:20:01 SkyScan query 14:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.895<-22993 Statuses=0008 0009 14:20:02 Msec=3000 True Az=112.995 Ze=-164.895 Az status=0008 Ze status=0009 14:20:02 Check angles 14:20:02 SkyScan query 14:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:20:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:20:03 Message to Master queued w/err=0: serial=119189 error=0 14:20:08 Received message from Master: op=Filter serial=119190 14:20:08 Color wheel filter change from 0 to 0 14:20:08 FLIGetFilterPos err=0 currentPosition=0 14:20:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:08 Filter is already there-color wheel unchanged 14:20:08 Received message from Master: op=Shutter serial=119191 14:20:08 Shutter LASER open 14:20:08 Received message from Camera: op=State serial=119193 14:20:08 GetSingleValue result=40 Value=cccccccc 14:20:08 SkyScan query 14:20:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:20:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:09 Parameters OK 14:20:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:09 Set A/D data flow result=40 14:20:09 Set A/D channel type result=40 14:20:09 Set A/D encoding result=40 14:20:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:09 Set channel filter=0.000000e+000 result=40 14:20:09 Config A/D Result=40 14:20:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:09 Get A/D filter: -9.255963e+061 result=40 14:20:09 Get A/D value=-858993460 result=40 14:20:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:09 Parameters OK 14:20:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:09 Set A/D data flow result=40 14:20:09 Set A/D channel type result=40 14:20:09 Set A/D encoding result=40 14:20:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:09 Set channel filter=0.000000e+000 result=40 14:20:09 Config A/D Result=40 14:20:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:09 Get A/D filter: -9.255963e+061 result=40 14:20:09 Get A/D value=-858993460 result=40 14:20:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:09 Aux= 14:20:09 Message to Camera, serial 119193 queued 14:20:17 Received message from Master: op=Shutter serial=119203 14:20:17 Shutter LASER close 14:20:17 Received message from Master: op=PointingHead serial=119207 14:20:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:20:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:20:18 Point started: ret=0 14:20:18 point_skyscan result=0 14:20:19 Check angles 14:20:19 SkyScan query 14:20:19 SkyScan query done: ret=0 az=89.625<-5975 ze=156.915<-1539 Statuses=0009 0009 14:20:19 Msec=0 True Az=89.625 Ze=156.915 Az status=0009 Ze status=0009 14:20:19 Check angles 14:20:19 SkyScan query 14:20:20 SkyScan query done: ret=0 az=71.76<-4784 ze=135.54<-2964 Statuses=0009 0009 14:20:20 Msec=750 True Az=71.76 Ze=135.54 Az status=0009 Ze status=0009 14:20:20 Check angles 14:20:20 SkyScan query 14:20:21 SkyScan query done: ret=0 az=54.51<-3634 ze=114.54<-4364 Statuses=0009 0009 14:20:21 Msec=1500 True Az=54.51 Ze=114.54 Az status=0009 Ze status=0009 14:20:21 Check angles 14:20:21 SkyScan query 14:20:21 SkyScan query done: ret=0 az=40.965<-2731 ze=93.615<-5759 Statuses=0009 0009 14:20:21 Msec=2250 True Az=40.965 Ze=93.615 Az status=0009 Ze status=0009 14:20:22 Check angles 14:20:22 SkyScan query 14:20:22 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 14:20:22 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 14:20:22 Check angles 14:20:22 SkyScan query 14:20:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 14:20:23 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 14:20:23 Check angles 14:20:23 SkyScan query 14:20:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:20:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:20:24 Message to Master queued w/err=0: serial=119207 error=0 14:20:29 Received message from Master: op=Filter serial=119208 14:20:29 Color wheel filter change from 0 to 0 14:20:29 FLIGetFilterPos err=0 currentPosition=0 14:20:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:29 Filter is already there-color wheel unchanged 14:20:29 Received message from Master: op=Shutter serial=119209 14:20:29 Shutter LASER close 14:20:29 Received message from Camera: op=State serial=119211 14:20:29 GetSingleValue result=40 Value=cccccccc 14:20:29 SkyScan query 14:20:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:20:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:30 Parameters OK 14:20:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:30 Set A/D data flow result=40 14:20:30 Set A/D channel type result=40 14:20:30 Set A/D encoding result=40 14:20:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:30 Set channel filter=0.000000e+000 result=40 14:20:30 Config A/D Result=40 14:20:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:30 Get A/D filter: -9.255963e+061 result=40 14:20:30 Get A/D value=-858993460 result=40 14:20:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:30 Parameters OK 14:20:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:30 Set A/D data flow result=40 14:20:30 Set A/D channel type result=40 14:20:30 Set A/D encoding result=40 14:20:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:30 Set channel filter=0.000000e+000 result=40 14:20:30 Config A/D Result=40 14:20:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:30 Get A/D filter: -9.255963e+061 result=40 14:20:30 Get A/D value=-858993460 result=40 14:20:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:30 Aux= 14:20:30 Message to Camera, serial 119211 queued 14:21:06 Received message from Master: op=PointingHead serial=119223 14:21:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:21:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:21:06 Point started: ret=0 14:21:06 point_skyscan result=0 14:21:07 Check angles 14:21:07 SkyScan query 14:21:07 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 14:21:07 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 14:21:07 Check angles 14:21:07 SkyScan query 14:21:08 SkyScan query done: ret=0 az=81.615<-5441 ze=66.495<-7567 Statuses=0009 0008 14:21:08 Msec=750 True Az=81.615 Ze=66.495 Az status=0009 Ze status=0008 14:21:08 Check angles 14:21:08 SkyScan query 14:21:09 SkyScan query done: ret=0 az=99.03<-6602 ze=66.495<-7567 Statuses=0009 0008 14:21:09 Msec=1500 True Az=99.03 Ze=66.495 Az status=0009 Ze status=0008 14:21:09 Check angles 14:21:09 SkyScan query 14:21:09 SkyScan query done: ret=0 az=116.475<-7765 ze=66.495<-7567 Statuses=0009 0008 14:21:09 Msec=2250 True Az=116.475 Ze=66.495 Az status=0009 Ze status=0008 14:21:10 Check angles 14:21:10 SkyScan query 14:21:10 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 14:21:10 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 14:21:10 Check angles 14:21:10 SkyScan query 14:21:11 SkyScan query done: ret=0 az=151.665<-10111 ze=66.495<-7567 Statuses=0009 0008 14:21:11 Msec=3750 True Az=151.665 Ze=66.495 Az status=0009 Ze status=0008 14:21:11 Check angles 14:21:11 SkyScan query 14:21:12 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:21:12 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:21:12 Message to Master queued w/err=0: serial=119223 error=0 14:21:17 Received message from Master: op=Filter serial=119224 14:21:17 Color wheel filter change from 0 to 0 14:21:17 FLIGetFilterPos err=0 currentPosition=0 14:21:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:17 Filter is already there-color wheel unchanged 14:21:17 Received message from Master: op=Shutter serial=119225 14:21:17 Shutter LASER close 14:21:17 Received message from Camera: op=State serial=119227 14:21:17 GetSingleValue result=40 Value=cccccccc 14:21:17 SkyScan query 14:21:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:21:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:17 Parameters OK 14:21:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:17 Set A/D data flow result=40 14:21:17 Set A/D channel type result=40 14:21:17 Set A/D encoding result=40 14:21:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:17 Set channel filter=0.000000e+000 result=40 14:21:17 Config A/D Result=40 14:21:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:17 Get A/D filter: -9.255963e+061 result=40 14:21:17 Get A/D value=-858993460 result=40 14:21:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:17 Parameters OK 14:21:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:17 Set A/D data flow result=40 14:21:17 Set A/D channel type result=40 14:21:17 Set A/D encoding result=40 14:21:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:17 Set channel filter=0.000000e+000 result=40 14:21:17 Config A/D Result=40 14:21:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:17 Get A/D filter: -9.255963e+061 result=40 14:21:17 Get A/D value=-858993460 result=40 14:21:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:17 Aux= 14:21:17 Message to Camera, serial 119227 queued 14:21:54 Received message from Master: op=PointingHead serial=119240 14:21:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:21:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:21:55 Point started: ret=0 14:21:55 point_skyscan result=0 14:21:55 Check angles 14:21:55 SkyScan query 14:21:56 SkyScan query done: ret=0 az=134.97<-8998 ze=36.69<-9554 Statuses=0009 0009 14:21:56 Msec=0 True Az=134.97 Ze=36.69 Az status=0009 Ze status=0009 14:21:56 Check angles 14:21:56 SkyScan query 14:21:57 SkyScan query done: ret=0 az=117.495<-7833 ze=15.75<-10950 Statuses=0009 0009 14:21:57 Msec=750 True Az=117.495 Ze=15.75 Az status=0009 Ze status=0009 14:21:57 Check angles 14:21:57 SkyScan query 14:21:58 SkyScan query done: ret=0 az=100.05<-6670 ze=-5.235<-12349 Statuses=0009 0009 14:21:58 Msec=1500 True Az=100.05 Ze=-5.235 Az status=0009 Ze status=0009 14:21:58 Check angles 14:21:58 SkyScan query 14:21:58 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.625<-13775 Statuses=0009 0009 14:21:58 Msec=2250 True Az=82.2 Ze=-26.625 Az status=0009 Ze status=0009 14:21:58 Check angles 14:21:58 SkyScan query 14:21:59 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.565<-14571 Statuses=0009 0008 14:21:59 Msec=3000 True Az=64.62 Ze=-38.565 Az status=0009 Ze status=0008 14:21:59 Check angles 14:21:59 SkyScan query 14:22:00 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.535<-14569 Statuses=0009 0008 14:22:00 Msec=3750 True Az=47.19 Ze=-38.535 Az status=0009 Ze status=0008 14:22:00 Check angles 14:22:00 SkyScan query 14:22:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:22:01 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:22:01 Message to Master queued w/err=0: serial=119240 error=0 14:22:06 Received message from Master: op=Filter serial=119241 14:22:06 Color wheel filter change from 0 to 0 14:22:06 FLIGetFilterPos err=0 currentPosition=0 14:22:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:06 Filter is already there-color wheel unchanged 14:22:06 Received message from Master: op=Shutter serial=119242 14:22:06 Shutter LASER close 14:22:06 Received message from Camera: op=State serial=119244 14:22:06 GetSingleValue result=40 Value=cccccccc 14:22:06 SkyScan query 14:22:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:22:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:06 Parameters OK 14:22:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:06 Set A/D data flow result=40 14:22:06 Set A/D channel type result=40 14:22:06 Set A/D encoding result=40 14:22:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:06 Set channel filter=0.000000e+000 result=40 14:22:06 Config A/D Result=40 14:22:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:06 Get A/D filter: -9.255963e+061 result=40 14:22:06 Get A/D value=-858993460 result=40 14:22:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:06 Parameters OK 14:22:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:06 Set A/D data flow result=40 14:22:06 Set A/D channel type result=40 14:22:06 Set A/D encoding result=40 14:22:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:06 Set channel filter=0.000000e+000 result=40 14:22:06 Config A/D Result=40 14:22:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:06 Get A/D filter: -9.255963e+061 result=40 14:22:06 Get A/D value=-858993460 result=40 14:22:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:06 Aux= 14:22:06 Message to Camera, serial 119244 queued 14:22:43 Received message from Master: op=PointingHead serial=119257 14:22:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:22:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:22:44 Point started: ret=0 14:22:44 point_skyscan result=0 14:22:44 Check angles 14:22:44 SkyScan query 14:22:45 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.46<-16564 Statuses=0009 0009 14:22:45 Msec=0 True Az=64.065 Ze=-68.46 Az status=0009 Ze status=0009 14:22:45 Check angles 14:22:45 SkyScan query 14:22:46 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.43<-17962 Statuses=0009 0009 14:22:46 Msec=750 True Az=81.585 Ze=-89.43 Az status=0009 Ze status=0009 14:22:46 Check angles 14:22:46 SkyScan query 14:22:46 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.865<-19391 Statuses=0009 0009 14:22:46 Msec=1500 True Az=99.285 Ze=-110.865 Az status=0009 Ze status=0009 14:22:47 Check angles 14:22:47 SkyScan query 14:22:47 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.73<-20782 Statuses=0009 0009 14:22:47 Msec=2250 True Az=116.82 Ze=-131.73 Az status=0009 Ze status=0009 14:22:47 Check angles 14:22:47 SkyScan query 14:22:48 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 14:22:48 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 14:22:48 Check angles 14:22:48 SkyScan query 14:22:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:22:49 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:22:49 Message to Master queued w/err=0: serial=119257 error=0 14:22:54 Received message from Master: op=Filter serial=119258 14:22:54 Color wheel filter change from 0 to 0 14:22:54 FLIGetFilterPos err=0 currentPosition=0 14:22:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:54 Filter is already there-color wheel unchanged 14:22:54 Received message from Master: op=Shutter serial=119259 14:22:54 Shutter LASER close 14:22:54 Received message from Camera: op=State serial=119261 14:22:54 GetSingleValue result=40 Value=cccccccc 14:22:54 SkyScan query 14:22:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:22:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:54 Parameters OK 14:22:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:54 Set A/D data flow result=40 14:22:54 Set A/D channel type result=40 14:22:54 Set A/D encoding result=40 14:22:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:54 Set channel filter=0.000000e+000 result=40 14:22:54 Config A/D Result=40 14:22:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:54 Get A/D filter: -9.255963e+061 result=40 14:22:54 Get A/D value=-858993460 result=40 14:22:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:54 Parameters OK 14:22:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:54 Set A/D data flow result=40 14:22:54 Set A/D channel type result=40 14:22:54 Set A/D encoding result=40 14:22:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:54 Set channel filter=0.000000e+000 result=40 14:22:54 Config A/D Result=40 14:22:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:54 Get A/D filter: -9.255963e+061 result=40 14:22:54 Get A/D value=-858993460 result=40 14:22:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:54 Aux= 14:22:54 Message to Camera, serial 119261 queued 14:23:31 Received message from Master: op=PointingHead serial=119274 14:23:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:23:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:23:32 Point started: ret=0 14:23:32 point_skyscan result=0 14:23:32 Check angles 14:23:32 SkyScan query 14:23:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 14:23:33 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 14:23:33 Check angles 14:23:33 SkyScan query 14:23:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:23:34 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:23:34 Message to Master queued w/err=0: serial=119274 error=0 14:23:39 Received message from Master: op=Filter serial=119275 14:23:39 Color wheel filter change from 0 to 0 14:23:39 FLIGetFilterPos err=0 currentPosition=0 14:23:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:39 Filter is already there-color wheel unchanged 14:23:39 Received message from Master: op=Shutter serial=119276 14:23:39 Shutter LASER open 14:23:39 Received message from Camera: op=State serial=119278 14:23:39 GetSingleValue result=40 Value=cccccccc 14:23:39 SkyScan query 14:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:23:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:40 Parameters OK 14:23:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:40 Set A/D data flow result=40 14:23:40 Set A/D channel type result=40 14:23:40 Set A/D encoding result=40 14:23:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:40 Set channel filter=0.000000e+000 result=40 14:23:40 Config A/D Result=40 14:23:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:40 Get A/D filter: -9.255963e+061 result=40 14:23:40 Get A/D value=-858993460 result=40 14:23:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:40 Parameters OK 14:23:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:40 Set A/D data flow result=40 14:23:40 Set A/D channel type result=40 14:23:40 Set A/D encoding result=40 14:23:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:40 Set channel filter=0.000000e+000 result=40 14:23:40 Config A/D Result=40 14:23:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:40 Get A/D filter: -9.255963e+061 result=40 14:23:40 Get A/D value=-858993460 result=40 14:23:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:40 Aux= 14:23:40 Message to Camera, serial 119278 queued 14:23:48 Received message from Master: op=Shutter serial=119288 14:23:48 Shutter LASER close 14:23:49 Received message from Master: op=PointingHead serial=119292 14:23:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:23:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:23:49 Point started: ret=0 14:23:49 point_skyscan result=0 14:23:50 Check angles 14:23:50 SkyScan query 14:23:50 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.175<-21545 Statuses=0009 0009 14:23:50 Msec=0 True Az=136.02 Ze=-143.175 Az status=0009 Ze status=0009 14:23:50 Check angles 14:23:50 SkyScan query 14:23:51 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.77<-20118 Statuses=0009 0009 14:23:51 Msec=750 True Az=153.885 Ze=-121.77 Az status=0009 Ze status=0009 14:23:51 Check angles 14:23:51 SkyScan query 14:23:52 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.785<-18719 Statuses=0009 0009 14:23:52 Msec=1500 True Az=171.45 Ze=-100.785 Az status=0009 Ze status=0009 14:23:52 Check angles 14:23:52 SkyScan query 14:23:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.89<-17326 Statuses=0008 0009 14:23:53 Msec=2250 True Az=176.01 Ze=-79.89 Az status=0008 Ze status=0009 14:23:53 Check angles 14:23:53 SkyScan query 14:23:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.425<-15895 Statuses=0008 0009 14:23:53 Msec=3000 True Az=176.01 Ze=-58.425 Az status=0008 Ze status=0009 14:23:53 Check angles 14:23:53 SkyScan query 14:23:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 14:23:54 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 14:23:54 Message to Master queued w/err=0: serial=119292 error=0 14:23:59 Received message from Master: op=Filter serial=119293 14:23:59 Color wheel filter change from 0 to 0 14:23:59 FLIGetFilterPos err=0 currentPosition=0 14:23:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:59 Filter is already there-color wheel unchanged 14:23:59 Received message from Master: op=Shutter serial=119294 14:23:59 Shutter LASER close 14:23:59 Received message from Camera: op=State serial=119296 14:23:59 GetSingleValue result=40 Value=cccccccc 14:23:59 SkyScan query 14:24:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:24:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:00 Parameters OK 14:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:00 Set A/D data flow result=40 14:24:00 Set A/D channel type result=40 14:24:00 Set A/D encoding result=40 14:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:00 Set channel filter=0.000000e+000 result=40 14:24:00 Config A/D Result=40 14:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:00 Get A/D filter: -9.255963e+061 result=40 14:24:00 Get A/D value=-858993460 result=40 14:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:00 Parameters OK 14:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:00 Set A/D data flow result=40 14:24:00 Set A/D channel type result=40 14:24:00 Set A/D encoding result=40 14:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:00 Set channel filter=0.000000e+000 result=40 14:24:00 Config A/D Result=40 14:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:00 Get A/D filter: -9.255963e+061 result=40 14:24:00 Get A/D value=-858993460 result=40 14:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:00 Aux= 14:24:00 Message to Camera, serial 119296 queued 14:24:37 Received message from Master: op=PointingHead serial=119309 14:24:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:24:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:24:37 Point started: ret=0 14:24:37 point_skyscan result=0 14:24:38 Check angles 14:24:38 SkyScan query 14:24:38 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.63<-13442 Statuses=0009 0009 14:24:38 Msec=0 True Az=152.76 Ze=-21.63 Az status=0009 Ze status=0009 14:24:39 Check angles 14:24:39 SkyScan query 14:24:39 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.63<-12042 Statuses=0009 0009 14:24:39 Msec=750 True Az=135.36 Ze=-0.63 Az status=0009 Ze status=0009 14:24:39 Check angles 14:24:39 SkyScan query 14:24:40 SkyScan query done: ret=0 az=117.81<-7854 ze=20.28<-10648 Statuses=0009 0009 14:24:40 Msec=1500 True Az=117.81 Ze=20.28 Az status=0009 Ze status=0009 14:24:40 Check angles 14:24:40 SkyScan query 14:24:41 SkyScan query done: ret=0 az=100.11<-6674 ze=41.7<-9220 Statuses=0009 0009 14:24:41 Msec=2250 True Az=100.11 Ze=41.7 Az status=0009 Ze status=0009 14:24:41 Check angles 14:24:41 SkyScan query 14:24:41 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 14:24:41 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 14:24:42 Check angles 14:24:42 SkyScan query 14:24:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:24:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:24:42 Message to Master queued w/err=0: serial=119309 error=0 14:24:47 Received message from Master: op=Filter serial=119310 14:24:47 Color wheel filter change from 0 to 0 14:24:47 FLIGetFilterPos err=0 currentPosition=0 14:24:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:47 Filter is already there-color wheel unchanged 14:24:47 Received message from Master: op=Shutter serial=119311 14:24:47 Shutter LASER close 14:24:47 Received message from Camera: op=State serial=119313 14:24:47 GetSingleValue result=40 Value=cccccccc 14:24:47 SkyScan query 14:24:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:24:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:48 Parameters OK 14:24:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:48 Set A/D data flow result=40 14:24:48 Set A/D channel type result=40 14:24:48 Set A/D encoding result=40 14:24:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:48 Set channel filter=0.000000e+000 result=40 14:24:48 Config A/D Result=40 14:24:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:48 Get A/D filter: -9.255963e+061 result=40 14:24:48 Get A/D value=-858993460 result=40 14:24:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:48 Parameters OK 14:24:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:48 Set A/D data flow result=40 14:24:48 Set A/D channel type result=40 14:24:48 Set A/D encoding result=40 14:24:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:48 Set channel filter=0.000000e+000 result=40 14:24:48 Config A/D Result=40 14:24:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:48 Get A/D filter: -9.255963e+061 result=40 14:24:48 Get A/D value=-858993460 result=40 14:24:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:48 Aux= 14:24:48 Message to Camera, serial 119313 queued 14:25:25 Received message from Master: op=PointingHead serial=119326 14:25:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:25:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:25:25 Point started: ret=0 14:25:25 point_skyscan result=0 14:25:26 Check angles 14:25:26 SkyScan query 14:25:27 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 14:25:27 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 14:25:27 Check angles 14:25:27 SkyScan query 14:25:27 SkyScan query done: ret=0 az=126.96<-8464 ze=38.505<-9433 Statuses=0009 0008 14:25:27 Msec=750 True Az=126.96 Ze=38.505 Az status=0009 Ze status=0008 14:25:27 Check angles 14:25:27 SkyScan query 14:25:28 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 14:25:28 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 14:25:28 Check angles 14:25:28 SkyScan query 14:25:29 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 14:25:29 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 14:25:29 Check angles 14:25:29 SkyScan query 14:25:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:25:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:25:30 Check angles 14:25:30 SkyScan query 14:25:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:25:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:25:30 Message to Master queued w/err=0: serial=119326 error=0 14:25:35 Received message from Master: op=Filter serial=119327 14:25:35 Color wheel filter change from 0 to 0 14:25:35 FLIGetFilterPos err=0 currentPosition=0 14:25:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:35 Filter is already there-color wheel unchanged 14:25:35 Received message from Master: op=Shutter serial=119328 14:25:35 Shutter LASER close 14:25:36 Received message from Camera: op=State serial=119330 14:25:36 GetSingleValue result=40 Value=cccccccc 14:25:36 SkyScan query 14:25:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:25:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:36 Parameters OK 14:25:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:36 Set A/D data flow result=40 14:25:36 Set A/D channel type result=40 14:25:36 Set A/D encoding result=40 14:25:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:36 Set channel filter=0.000000e+000 result=40 14:25:36 Config A/D Result=40 14:25:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:36 Get A/D filter: -9.255963e+061 result=40 14:25:36 Get A/D value=-858993460 result=40 14:25:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:36 Parameters OK 14:25:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:36 Set A/D data flow result=40 14:25:36 Set A/D channel type result=40 14:25:36 Set A/D encoding result=40 14:25:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:36 Set channel filter=0.000000e+000 result=40 14:25:36 Config A/D Result=40 14:25:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:36 Get A/D filter: -9.255963e+061 result=40 14:25:36 Get A/D value=-858993460 result=40 14:25:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:36 Aux= 14:25:36 Message to Camera, serial 119330 queued 14:26:13 Received message from Master: op=PointingHead serial=119343 14:26:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:26:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:26:13 Point started: ret=0 14:26:13 point_skyscan result=0 14:26:14 Check angles 14:26:14 SkyScan query 14:26:15 SkyScan query done: ret=0 az=152.97<-10198 ze=8.82<-11412 Statuses=0009 0009 14:26:15 Msec=0 True Az=152.97 Ze=8.82 Az status=0009 Ze status=0009 14:26:15 Check angles 14:26:15 SkyScan query 14:26:15 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.15<-12810 Statuses=0009 0009 14:26:15 Msec=750 True Az=135.42 Ze=-12.15 Az status=0009 Ze status=0009 14:26:16 Check angles 14:26:16 SkyScan query 14:26:16 SkyScan query done: ret=0 az=118.035<-7869 ze=-33.09<-14206 Statuses=0009 0009 14:26:16 Msec=1500 True Az=118.035 Ze=-33.09 Az status=0009 Ze status=0009 14:26:16 Check angles 14:26:16 SkyScan query [UTC 2018-12-13 14:26:17] 14:26:17 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.555<-15437 Statuses=0009 0009 14:26:17 Msec=2250 True Az=100.185 Ze=-51.555 Az status=0009 Ze status=0009 14:26:17 Check angles 14:26:17 SkyScan query 14:26:18 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:26:18 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:26:18 Check angles 14:26:18 SkyScan query 14:26:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:26:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:26:18 Message to Master queued w/err=0: serial=119343 error=0 14:26:23 Received message from Master: op=Filter serial=119344 14:26:23 Color wheel filter change from 0 to 0 14:26:23 FLIGetFilterPos err=0 currentPosition=0 14:26:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:23 Filter is already there-color wheel unchanged 14:26:24 Received message from Master: op=Shutter serial=119345 14:26:24 Shutter LASER close 14:26:24 Received message from Camera: op=State serial=119347 14:26:24 GetSingleValue result=40 Value=cccccccc 14:26:24 SkyScan query 14:26:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:26:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:24 Parameters OK 14:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:24 Set A/D data flow result=40 14:26:24 Set A/D channel type result=40 14:26:24 Set A/D encoding result=40 14:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:24 Set channel filter=0.000000e+000 result=40 14:26:24 Config A/D Result=40 14:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:24 Get A/D filter: -9.255963e+061 result=40 14:26:24 Get A/D value=-858993460 result=40 14:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:24 Parameters OK 14:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:24 Set A/D data flow result=40 14:26:24 Set A/D channel type result=40 14:26:24 Set A/D encoding result=40 14:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:24 Set channel filter=0.000000e+000 result=40 14:26:24 Config A/D Result=40 14:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:24 Get A/D filter: -9.255963e+061 result=40 14:26:24 Get A/D value=-858993460 result=40 14:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:24 Aux= 14:26:24 Message to Camera, serial 119347 queued 14:27:01 Received message from Master: op=PointingHead serial=119360 14:27:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:27:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:27:01 Point started: ret=0 14:27:01 point_skyscan result=0 14:27:02 Check angles 14:27:02 SkyScan query 14:27:03 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.21<-17414 Statuses=0009 0009 14:27:03 Msec=0 True Az=108.915 Ze=-81.21 Az status=0009 Ze status=0009 14:27:03 Check angles 14:27:03 SkyScan query 14:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.165<-18811 Statuses=0008 0009 14:27:03 Msec=750 True Az=112.995 Ze=-102.165 Az status=0008 Ze status=0009 14:27:04 Check angles 14:27:04 SkyScan query 14:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.555<-20237 Statuses=0008 0009 14:27:04 Msec=1500 True Az=112.995 Ze=-123.555 Az status=0008 Ze status=0009 14:27:04 Check angles 14:27:04 SkyScan query 14:27:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 14:27:05 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 14:27:05 Check angles 14:27:05 SkyScan query 14:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.45<-23030 Statuses=0008 0009 14:27:06 Msec=3000 True Az=112.995 Ze=-165.45 Az status=0008 Ze status=0009 14:27:06 Check angles 14:27:06 SkyScan query 14:27:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:27:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:27:07 Message to Master queued w/err=0: serial=119360 error=0 14:27:12 Received message from Master: op=Filter serial=119361 14:27:12 Color wheel filter change from 0 to 0 14:27:12 FLIGetFilterPos err=0 currentPosition=0 14:27:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:12 Filter is already there-color wheel unchanged 14:27:12 Received message from Master: op=Shutter serial=119362 14:27:12 Shutter LASER open 14:27:12 Received message from Camera: op=State serial=119364 14:27:12 GetSingleValue result=40 Value=cccccccc 14:27:12 SkyScan query 14:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:27:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:12 Parameters OK 14:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:12 Set A/D data flow result=40 14:27:12 Set A/D channel type result=40 14:27:12 Set A/D encoding result=40 14:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:12 Set channel filter=0.000000e+000 result=40 14:27:12 Config A/D Result=40 14:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:12 Get A/D filter: -9.255963e+061 result=40 14:27:12 Get A/D value=-858993460 result=40 14:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:12 Parameters OK 14:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:12 Set A/D data flow result=40 14:27:12 Set A/D channel type result=40 14:27:12 Set A/D encoding result=40 14:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:12 Set channel filter=0.000000e+000 result=40 14:27:12 Config A/D Result=40 14:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:12 Get A/D filter: -9.255963e+061 result=40 14:27:12 Get A/D value=-858993460 result=40 14:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:12 Aux= 14:27:12 Message to Camera, serial 119364 queued 14:27:21 Received message from Master: op=Shutter serial=119374 14:27:21 Shutter LASER close 14:27:21 Received message from Master: op=PointingHead serial=119378 14:27:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:27:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:27:22 Point started: ret=0 14:27:22 point_skyscan result=0 14:27:22 Check angles 14:27:22 SkyScan query 14:27:23 SkyScan query done: ret=0 az=90.015<-6001 ze=157.335<-1511 Statuses=0009 0009 14:27:23 Msec=0 True Az=90.015 Ze=157.335 Az status=0009 Ze status=0009 14:27:23 Check angles 14:27:23 SkyScan query 14:27:24 SkyScan query done: ret=0 az=72.525<-4835 ze=136.35<-2910 Statuses=0009 0009 14:27:24 Msec=750 True Az=72.525 Ze=136.35 Az status=0009 Ze status=0009 14:27:24 Check angles 14:27:24 SkyScan query 14:27:25 SkyScan query done: ret=0 az=55.08<-3672 ze=115.455<-4303 Statuses=0009 0009 14:27:25 Msec=1500 True Az=55.08 Ze=115.455 Az status=0009 Ze status=0009 14:27:25 Check angles 14:27:25 SkyScan query 14:27:25 SkyScan query done: ret=0 az=40.98<-2732 ze=94.41<-5706 Statuses=0009 0009 14:27:25 Msec=2250 True Az=40.98 Ze=94.41 Az status=0009 Ze status=0009 14:27:25 Check angles 14:27:25 SkyScan query 14:27:26 SkyScan query done: ret=0 az=40.995<-2733 ze=73.5<-7100 Statuses=0008 0009 14:27:26 Msec=3000 True Az=40.995 Ze=73.5 Az status=0008 Ze status=0009 14:27:26 Check angles 14:27:26 SkyScan query 14:27:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.89<-8474 Statuses=0008 0009 14:27:27 Msec=3750 True Az=40.995 Ze=52.89 Az status=0008 Ze status=0009 14:27:27 Check angles 14:27:27 SkyScan query 14:27:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:27:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:27:28 Message to Master queued w/err=0: serial=119378 error=0 14:27:33 Received message from Master: op=Filter serial=119379 14:27:33 Color wheel filter change from 0 to 0 14:27:33 FLIGetFilterPos err=0 currentPosition=0 14:27:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:33 Filter is already there-color wheel unchanged 14:27:33 Received message from Master: op=Shutter serial=119380 14:27:33 Shutter LASER close 14:27:33 Received message from Camera: op=State serial=119382 14:27:33 GetSingleValue result=40 Value=cccccccc 14:27:33 SkyScan query 14:27:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:27:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:33 Parameters OK 14:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:33 Set A/D data flow result=40 14:27:33 Set A/D channel type result=40 14:27:33 Set A/D encoding result=40 14:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:33 Set channel filter=0.000000e+000 result=40 14:27:33 Config A/D Result=40 14:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:33 Get A/D filter: -9.255963e+061 result=40 14:27:33 Get A/D value=-858993460 result=40 14:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:33 Parameters OK 14:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:33 Set A/D data flow result=40 14:27:33 Set A/D channel type result=40 14:27:33 Set A/D encoding result=40 14:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:33 Set channel filter=0.000000e+000 result=40 14:27:33 Config A/D Result=40 14:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:33 Get A/D filter: -9.255963e+061 result=40 14:27:33 Get A/D value=-858993460 result=40 14:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:33 Aux= 14:27:33 Message to Camera, serial 119382 queued 14:28:10 Received message from Master: op=PointingHead serial=119395 14:28:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:28:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:28:11 Point started: ret=0 14:28:11 point_skyscan result=0 14:28:11 Check angles 14:28:11 SkyScan query 14:28:12 SkyScan query done: ret=0 az=63.78<-4252 ze=66.54<-7564 Statuses=0009 0008 14:28:12 Msec=0 True Az=63.78 Ze=66.54 Az status=0009 Ze status=0008 14:28:12 Check angles 14:28:12 SkyScan query 14:28:13 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 14:28:13 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 14:28:13 Check angles 14:28:13 SkyScan query 14:28:13 SkyScan query done: ret=0 az=98.64<-6576 ze=66.495<-7567 Statuses=0009 0008 14:28:13 Msec=1500 True Az=98.64 Ze=66.495 Az status=0009 Ze status=0008 14:28:14 Check angles 14:28:14 SkyScan query 14:28:14 SkyScan query done: ret=0 az=116.22<-7748 ze=66.495<-7567 Statuses=0009 0008 14:28:14 Msec=2250 True Az=116.22 Ze=66.495 Az status=0009 Ze status=0008 14:28:14 Check angles 14:28:14 SkyScan query 14:28:15 SkyScan query done: ret=0 az=133.605<-8907 ze=66.495<-7567 Statuses=0009 0008 14:28:15 Msec=3000 True Az=133.605 Ze=66.495 Az status=0009 Ze status=0008 14:28:15 Check angles 14:28:15 SkyScan query 14:28:16 SkyScan query done: ret=0 az=151.11<-10074 ze=66.495<-7567 Statuses=0009 0008 14:28:16 Msec=3750 True Az=151.11 Ze=66.495 Az status=0009 Ze status=0008 14:28:16 Check angles 14:28:16 SkyScan query 14:28:16 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:28:16 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:28:16 Message to Master queued w/err=0: serial=119395 error=0 14:28:21 Received message from Master: op=Filter serial=119396 14:28:21 Color wheel filter change from 0 to 0 14:28:21 FLIGetFilterPos err=0 currentPosition=0 14:28:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:21 Filter is already there-color wheel unchanged 14:28:22 Received message from Master: op=Shutter serial=119397 14:28:22 Shutter LASER close 14:28:22 Received message from Camera: op=State serial=119399 14:28:22 GetSingleValue result=40 Value=cccccccc 14:28:22 SkyScan query 14:28:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:28:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:22 Parameters OK 14:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:22 Set A/D data flow result=40 14:28:22 Set A/D channel type result=40 14:28:22 Set A/D encoding result=40 14:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:22 Set channel filter=0.000000e+000 result=40 14:28:22 Config A/D Result=40 14:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:22 Get A/D filter: -9.255963e+061 result=40 14:28:22 Get A/D value=-858993460 result=40 14:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:22 Parameters OK 14:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:22 Set A/D data flow result=40 14:28:22 Set A/D channel type result=40 14:28:22 Set A/D encoding result=40 14:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:22 Set channel filter=0.000000e+000 result=40 14:28:22 Config A/D Result=40 14:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:22 Get A/D filter: -9.255963e+061 result=40 14:28:22 Get A/D value=-858993460 result=40 14:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:22 Aux= 14:28:22 Message to Camera, serial 119399 queued 14:28:59 Received message from Master: op=PointingHead serial=119412 14:28:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:28:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:28:59 Point started: ret=0 14:28:59 point_skyscan result=0 14:29:00 Check angles 14:29:00 SkyScan query 14:29:01 SkyScan query done: ret=0 az=134.58<-8972 ze=36.285<-9581 Statuses=0009 0009 14:29:01 Msec=0 True Az=134.58 Ze=36.285 Az status=0009 Ze status=0009 14:29:01 Check angles 14:29:01 SkyScan query 14:29:02 SkyScan query done: ret=0 az=117.135<-7809 ze=15.33<-10978 Statuses=0009 0009 14:29:02 Msec=750 True Az=117.135 Ze=15.33 Az status=0009 Ze status=0009 14:29:02 Check angles 14:29:02 SkyScan query 14:29:02 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.655<-12377 Statuses=0009 0009 14:29:02 Msec=1500 True Az=99.69 Ze=-5.655 Az status=0009 Ze status=0009 14:29:02 Check angles 14:29:02 SkyScan query 14:29:03 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.58<-13772 Statuses=0009 0009 14:29:03 Msec=2250 True Az=82.26 Ze=-26.58 Az status=0009 Ze status=0009 14:29:03 Check angles 14:29:03 SkyScan query 14:29:04 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.565<-14571 Statuses=0009 0008 14:29:04 Msec=3000 True Az=64.695 Ze=-38.565 Az status=0009 Ze status=0008 14:29:04 Check angles 14:29:04 SkyScan query 14:29:05 SkyScan query done: ret=0 az=47.25<-3150 ze=-38.535<-14569 Statuses=0009 0008 14:29:05 Msec=3750 True Az=47.25 Ze=-38.535 Az status=0009 Ze status=0008 14:29:05 Check angles 14:29:05 SkyScan query 14:29:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:29:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:29:05 Message to Master queued w/err=0: serial=119412 error=0 14:29:10 Received message from Master: op=Filter serial=119413 14:29:10 Color wheel filter change from 0 to 0 14:29:10 FLIGetFilterPos err=0 currentPosition=0 14:29:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:10 Filter is already there-color wheel unchanged 14:29:10 Received message from Master: op=Shutter serial=119414 14:29:10 Shutter LASER close 14:29:10 Received message from Camera: op=State serial=119416 14:29:10 GetSingleValue result=40 Value=cccccccc 14:29:10 SkyScan query 14:29:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:29:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:11 Parameters OK 14:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:11 Set A/D data flow result=40 14:29:11 Set A/D channel type result=40 14:29:11 Set A/D encoding result=40 14:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:11 Set channel filter=0.000000e+000 result=40 14:29:11 Config A/D Result=40 14:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:11 Get A/D filter: -9.255963e+061 result=40 14:29:11 Get A/D value=-858993460 result=40 14:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:11 Parameters OK 14:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:11 Set A/D data flow result=40 14:29:11 Set A/D channel type result=40 14:29:11 Set A/D encoding result=40 14:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:11 Set channel filter=0.000000e+000 result=40 14:29:11 Config A/D Result=40 14:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:11 Get A/D filter: -9.255963e+061 result=40 14:29:11 Get A/D value=-858993460 result=40 14:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:11 Aux= 14:29:11 Message to Camera, serial 119416 queued 14:29:48 Received message from Master: op=PointingHead serial=119429 14:29:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:29:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:29:48 Point started: ret=0 14:29:48 point_skyscan result=0 14:29:49 Check angles 14:29:49 SkyScan query 14:29:50 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.43<-16562 Statuses=0009 0009 14:29:50 Msec=0 True Az=64.23 Ze=-68.43 Az status=0009 Ze status=0009 14:29:50 Check angles 14:29:50 SkyScan query 14:29:50 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.43<-17962 Statuses=0009 0009 14:29:50 Msec=750 True Az=81.6 Ze=-89.43 Az status=0009 Ze status=0009 14:29:50 Check angles 14:29:50 SkyScan query 14:29:51 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.37<-19358 Statuses=0009 0009 14:29:51 Msec=1500 True Az=99.12 Ze=-110.37 Az status=0009 Ze status=0009 14:29:51 Check angles 14:29:51 SkyScan query 14:29:52 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.295<-20753 Statuses=0009 0009 14:29:52 Msec=2250 True Az=116.715 Ze=-131.295 Az status=0009 Ze status=0009 14:29:52 Check angles 14:29:52 SkyScan query 14:29:53 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 14:29:53 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 14:29:53 Check angles 14:29:53 SkyScan query 14:29:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 14:29:53 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 14:29:53 Message to Master queued w/err=0: serial=119429 error=0 14:29:58 Received message from Master: op=Filter serial=119430 14:29:58 Color wheel filter change from 0 to 0 14:29:58 FLIGetFilterPos err=0 currentPosition=0 14:29:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:58 Filter is already there-color wheel unchanged 14:29:58 Received message from Master: op=Shutter serial=119431 14:29:58 Shutter LASER close 14:29:59 Received message from Camera: op=State serial=119433 14:29:59 GetSingleValue result=40 Value=cccccccc 14:29:59 SkyScan query 14:29:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:29:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:59 Parameters OK 14:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:59 Set A/D data flow result=40 14:29:59 Set A/D channel type result=40 14:29:59 Set A/D encoding result=40 14:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:59 Set channel filter=0.000000e+000 result=40 14:29:59 Config A/D Result=40 14:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:59 Get A/D filter: -9.255963e+061 result=40 14:29:59 Get A/D value=-858993460 result=40 14:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:59 Parameters OK 14:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:59 Set A/D data flow result=40 14:29:59 Set A/D channel type result=40 14:29:59 Set A/D encoding result=40 14:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:59 Set channel filter=0.000000e+000 result=40 14:29:59 Config A/D Result=40 14:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:59 Get A/D filter: -9.255963e+061 result=40 14:29:59 Get A/D value=-858993460 result=40 14:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:59 Aux= 14:29:59 Message to Camera, serial 119433 queued 14:30:36 Received message from Master: op=PointingHead serial=119446 14:30:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:30:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:30:36 Point started: ret=0 14:30:36 point_skyscan result=0 14:30:37 Check angles 14:30:37 SkyScan query 14:30:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 14:30:38 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 14:30:38 Check angles 14:30:38 SkyScan query 14:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:30:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:30:38 Message to Master queued w/err=0: serial=119446 error=0 14:30:43 Received message from Master: op=Filter serial=119447 14:30:43 Color wheel filter change from 0 to 0 14:30:43 FLIGetFilterPos err=0 currentPosition=0 14:30:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:43 Filter is already there-color wheel unchanged 14:30:44 Received message from Master: op=Shutter serial=119448 14:30:44 Shutter LASER open 14:30:44 Received message from Camera: op=State serial=119450 14:30:44 GetSingleValue result=40 Value=cccccccc 14:30:44 SkyScan query 14:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:30:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:44 Parameters OK 14:30:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:44 Set A/D data flow result=40 14:30:44 Set A/D channel type result=40 14:30:44 Set A/D encoding result=40 14:30:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:44 Set channel filter=0.000000e+000 result=40 14:30:44 Config A/D Result=40 14:30:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:44 Get A/D filter: -9.255963e+061 result=40 14:30:44 Get A/D value=-858993460 result=40 14:30:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:44 Parameters OK 14:30:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:44 Set A/D data flow result=40 14:30:44 Set A/D channel type result=40 14:30:44 Set A/D encoding result=40 14:30:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:44 Set channel filter=0.000000e+000 result=40 14:30:44 Config A/D Result=40 14:30:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:44 Get A/D filter: -9.255963e+061 result=40 14:30:44 Get A/D value=-858993460 result=40 14:30:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:44 Aux= 14:30:44 Message to Camera, serial 119450 queued 14:30:52 Received message from Master: op=Shutter serial=119459 14:30:52 Shutter LASER close 14:30:52 Received message from Master: op=PointingHead serial=119463 14:30:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:30:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:30:53 Point started: ret=0 14:30:53 point_skyscan result=0 14:30:53 Check angles 14:30:53 SkyScan query 14:30:54 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.25<-21550 Statuses=0009 0009 14:30:54 Msec=0 True Az=135.945 Ze=-143.25 Az status=0009 Ze status=0009 14:30:54 Check angles 14:30:54 SkyScan query 14:30:55 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.295<-20153 Statuses=0009 0009 14:30:55 Msec=750 True Az=153.435 Ze=-122.295 Az status=0009 Ze status=0009 14:30:55 Check angles 14:30:55 SkyScan query 14:30:56 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.385<-18759 Statuses=0009 0009 14:30:56 Msec=1500 True Az=170.895 Ze=-101.385 Az status=0009 Ze status=0009 14:30:56 Check angles 14:30:56 SkyScan query 14:30:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.385<-17359 Statuses=0008 0009 14:30:56 Msec=2250 True Az=176.01 Ze=-80.385 Az status=0008 Ze status=0009 14:30:56 Check angles 14:30:56 SkyScan query 14:30:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.43<-15962 Statuses=0008 0009 14:30:57 Msec=3000 True Az=176.01 Ze=-59.43 Az status=0008 Ze status=0009 14:30:57 Check angles 14:30:57 SkyScan query 14:30:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:30:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:30:58 Message to Master queued w/err=0: serial=119463 error=0 14:31:03 Received message from Master: op=Filter serial=119464 14:31:03 Color wheel filter change from 0 to 0 14:31:03 FLIGetFilterPos err=0 currentPosition=0 14:31:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:03 Filter is already there-color wheel unchanged 14:31:03 Received message from Master: op=Shutter serial=119465 14:31:03 Shutter LASER close 14:31:03 Received message from Camera: op=State serial=119467 14:31:03 GetSingleValue result=40 Value=cccccccc 14:31:03 SkyScan query 14:31:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:31:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:04 Parameters OK 14:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:04 Set A/D data flow result=40 14:31:04 Set A/D channel type result=40 14:31:04 Set A/D encoding result=40 14:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:04 Set channel filter=0.000000e+000 result=40 14:31:04 Config A/D Result=40 14:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:04 Get A/D filter: -9.255963e+061 result=40 14:31:04 Get A/D value=-858993460 result=40 14:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:04 Parameters OK 14:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:04 Set A/D data flow result=40 14:31:04 Set A/D channel type result=40 14:31:04 Set A/D encoding result=40 14:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:04 Set channel filter=0.000000e+000 result=40 14:31:04 Config A/D Result=40 14:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:04 Get A/D filter: -9.255963e+061 result=40 14:31:04 Get A/D value=-858993460 result=40 14:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:04 Aux= 14:31:04 Message to Camera, serial 119467 queued 14:31:41 Received message from Master: op=PointingHead serial=119480 14:31:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:31:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:31:41 Point started: ret=0 14:31:41 point_skyscan result=0 14:31:42 Check angles 14:31:42 SkyScan query 14:31:42 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.84<-13456 Statuses=0009 0009 14:31:42 Msec=0 True Az=152.97 Ze=-21.84 Az status=0009 Ze status=0009 14:31:42 Check angles 14:31:42 SkyScan query 14:31:43 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.42<-12028 Statuses=0009 0009 14:31:43 Msec=750 True Az=135.165 Ze=-0.42 Az status=0009 Ze status=0009 14:31:43 Check angles 14:31:43 SkyScan query 14:31:44 SkyScan query done: ret=0 az=117.6<-7840 ze=20.535<-10631 Statuses=0009 0009 14:31:44 Msec=1500 True Az=117.6 Ze=20.535 Az status=0009 Ze status=0009 14:31:44 Check angles 14:31:44 SkyScan query 14:31:44 SkyScan query done: ret=0 az=99.96<-6664 ze=41.925<-9205 Statuses=0009 0009 14:31:44 Msec=2250 True Az=99.96 Ze=41.925 Az status=0009 Ze status=0009 14:31:45 Check angles 14:31:45 SkyScan query 14:31:45 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 14:31:45 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 14:31:45 Check angles 14:31:45 SkyScan query 14:31:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:31:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:31:46 Message to Master queued w/err=0: serial=119480 error=0 14:31:51 Received message from Master: op=Filter serial=119481 14:31:51 Color wheel filter change from 0 to 0 14:31:51 FLIGetFilterPos err=0 currentPosition=0 14:31:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:51 Filter is already there-color wheel unchanged 14:31:51 Received message from Master: op=Shutter serial=119482 14:31:51 Shutter LASER close 14:31:51 Received message from Camera: op=State serial=119484 14:31:51 GetSingleValue result=40 Value=cccccccc 14:31:51 SkyScan query 14:31:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:31:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:52 Parameters OK 14:31:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:52 Set A/D data flow result=40 14:31:52 Set A/D channel type result=40 14:31:52 Set A/D encoding result=40 14:31:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:52 Set channel filter=0.000000e+000 result=40 14:31:52 Config A/D Result=40 14:31:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:52 Get A/D filter: -9.255963e+061 result=40 14:31:52 Get A/D value=-858993460 result=40 14:31:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:52 Parameters OK 14:31:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:52 Set A/D data flow result=40 14:31:52 Set A/D channel type result=40 14:31:52 Set A/D encoding result=40 14:31:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:52 Set channel filter=0.000000e+000 result=40 14:31:52 Config A/D Result=40 14:31:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:52 Get A/D filter: -9.255963e+061 result=40 14:31:52 Get A/D value=-858993460 result=40 14:31:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:52 Aux= 14:31:52 Message to Camera, serial 119484 queued 14:32:29 Received message from Master: op=PointingHead serial=119497 14:32:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:32:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:32:29 Point started: ret=0 14:32:29 point_skyscan result=0 14:32:30 Check angles 14:32:30 SkyScan query 14:32:30 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 14:32:30 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 14:32:30 Check angles 14:32:30 SkyScan query 14:32:31 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 14:32:31 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 14:32:31 Check angles 14:32:31 SkyScan query 14:32:32 SkyScan query done: ret=0 az=144.525<-9635 ze=38.505<-9433 Statuses=0009 0008 14:32:32 Msec=1500 True Az=144.525 Ze=38.505 Az status=0009 Ze status=0008 14:32:32 Check angles 14:32:32 SkyScan query 14:32:33 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 14:32:33 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 14:32:33 Check angles 14:32:33 SkyScan query 14:32:33 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:32:33 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:32:33 Check angles 14:32:33 SkyScan query 14:32:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:32:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:32:34 Message to Master queued w/err=0: serial=119497 error=0 14:32:39 Received message from Master: op=Filter serial=119498 14:32:39 Color wheel filter change from 0 to 0 14:32:39 FLIGetFilterPos err=0 currentPosition=0 14:32:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:39 Filter is already there-color wheel unchanged 14:32:39 Received message from Master: op=Shutter serial=119499 14:32:39 Shutter LASER close 14:32:39 Received message from Camera: op=State serial=119501 14:32:39 GetSingleValue result=40 Value=cccccccc 14:32:39 SkyScan query 14:32:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:32:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:40 Parameters OK 14:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:40 Set A/D data flow result=40 14:32:40 Set A/D channel type result=40 14:32:40 Set A/D encoding result=40 14:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:40 Set channel filter=0.000000e+000 result=40 14:32:40 Config A/D Result=40 14:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:40 Get A/D filter: -9.255963e+061 result=40 14:32:40 Get A/D value=-858993460 result=40 14:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:40 Parameters OK 14:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:40 Set A/D data flow result=40 14:32:40 Set A/D channel type result=40 14:32:40 Set A/D encoding result=40 14:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:40 Set channel filter=0.000000e+000 result=40 14:32:40 Config A/D Result=40 14:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:40 Get A/D filter: -9.255963e+061 result=40 14:32:40 Get A/D value=-858993460 result=40 14:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:40 Aux= 14:32:40 Message to Camera, serial 119501 queued 14:33:17 Received message from Master: op=PointingHead serial=119514 14:33:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:33:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:33:17 Point started: ret=0 14:33:17 point_skyscan result=0 14:33:18 Check angles 14:33:18 SkyScan query 14:33:18 SkyScan query done: ret=0 az=152.97<-10198 ze=8.685<-11421 Statuses=0009 0009 14:33:18 Msec=0 True Az=152.97 Ze=8.685 Az status=0009 Ze status=0009 14:33:19 Check angles 14:33:19 SkyScan query 14:33:19 SkyScan query done: ret=0 az=135.555<-9037 ze=-12.27<-12818 Statuses=0009 0009 14:33:19 Msec=750 True Az=135.555 Ze=-12.27 Az status=0009 Ze status=0009 14:33:19 Check angles 14:33:19 SkyScan query 14:33:20 SkyScan query done: ret=0 az=117.99<-7866 ze=-33.21<-14214 Statuses=0009 0009 14:33:20 Msec=1500 True Az=117.99 Ze=-33.21 Az status=0009 Ze status=0009 14:33:20 Check angles 14:33:20 SkyScan query 14:33:21 SkyScan query done: ret=0 az=100.605<-6707 ze=-51.54<-15436 Statuses=0009 0009 14:33:21 Msec=2250 True Az=100.605 Ze=-51.54 Az status=0009 Ze status=0009 14:33:21 Check angles 14:33:21 SkyScan query 14:33:21 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:33:21 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:33:22 Check angles 14:33:22 SkyScan query 14:33:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:33:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:33:22 Message to Master queued w/err=0: serial=119514 error=0 14:33:27 Received message from Master: op=Filter serial=119515 14:33:27 Color wheel filter change from 0 to 0 14:33:27 FLIGetFilterPos err=0 currentPosition=0 14:33:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:27 Filter is already there-color wheel unchanged 14:33:27 Received message from Master: op=Shutter serial=119516 14:33:27 Shutter LASER close 14:33:27 Received message from Camera: op=State serial=119518 14:33:27 GetSingleValue result=40 Value=cccccccc 14:33:27 SkyScan query 14:33:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:33:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:28 Parameters OK 14:33:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:28 Set A/D data flow result=40 14:33:28 Set A/D channel type result=40 14:33:28 Set A/D encoding result=40 14:33:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:28 Set channel filter=0.000000e+000 result=40 14:33:28 Config A/D Result=40 14:33:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:28 Get A/D filter: -9.255963e+061 result=40 14:33:28 Get A/D value=-858993460 result=40 14:33:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:28 Parameters OK 14:33:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:28 Set A/D data flow result=40 14:33:28 Set A/D channel type result=40 14:33:28 Set A/D encoding result=40 14:33:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:28 Set channel filter=0.000000e+000 result=40 14:33:28 Config A/D Result=40 14:33:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:28 Get A/D filter: -9.255963e+061 result=40 14:33:28 Get A/D value=-858993460 result=40 14:33:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:28 Aux= 14:33:28 Message to Camera, serial 119518 queued 14:34:05 Received message from Master: op=PointingHead serial=119531 14:34:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:34:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:34:05 Point started: ret=0 14:34:05 point_skyscan result=0 14:34:06 Check angles 14:34:06 SkyScan query 14:34:06 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.75<-17450 Statuses=0009 0009 14:34:06 Msec=0 True Az=109.335 Ze=-81.75 Az status=0009 Ze status=0009 14:34:07 Check angles 14:34:07 SkyScan query 14:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 14:34:07 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 14:34:07 Check angles 14:34:07 SkyScan query 14:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.08<-20272 Statuses=0008 0009 14:34:08 Msec=1500 True Az=112.995 Ze=-124.08 Az status=0008 Ze status=0009 14:34:08 Check angles 14:34:08 SkyScan query 14:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 14:34:09 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 14:34:09 Check angles 14:34:09 SkyScan query 14:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 14:34:09 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 14:34:10 Check angles 14:34:10 SkyScan query 14:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:34:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:34:10 Message to Master queued w/err=0: serial=119531 error=0 14:34:15 Received message from Master: op=Filter serial=119532 14:34:15 Color wheel filter change from 0 to 0 14:34:15 FLIGetFilterPos err=0 currentPosition=0 14:34:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:15 Filter is already there-color wheel unchanged 14:34:15 Received message from Master: op=Shutter serial=119533 14:34:15 Shutter LASER open 14:34:16 Received message from Camera: op=State serial=119535 14:34:16 GetSingleValue result=40 Value=cccccccc 14:34:16 SkyScan query 14:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:34:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:16 Parameters OK 14:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:16 Set A/D data flow result=40 14:34:16 Set A/D channel type result=40 14:34:16 Set A/D encoding result=40 14:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:16 Set channel filter=0.000000e+000 result=40 14:34:16 Config A/D Result=40 14:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:16 Get A/D filter: -9.255963e+061 result=40 14:34:16 Get A/D value=-858993460 result=40 14:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:16 Parameters OK 14:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:16 Set A/D data flow result=40 14:34:16 Set A/D channel type result=40 14:34:16 Set A/D encoding result=40 14:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:16 Set channel filter=0.000000e+000 result=40 14:34:16 Config A/D Result=40 14:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:16 Get A/D filter: -9.255963e+061 result=40 14:34:16 Get A/D value=-858993460 result=40 14:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:16 Aux= 14:34:16 Message to Camera, serial 119535 queued 14:34:25 Received message from Master: op=Shutter serial=119545 14:34:25 Shutter LASER close 14:34:25 Received message from Master: op=PointingHead serial=119549 14:34:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:34:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:34:25 Point started: ret=0 14:34:25 point_skyscan result=0 14:34:26 Check angles 14:34:26 SkyScan query 14:34:27 SkyScan query done: ret=0 az=89.625<-5975 ze=156.99<-1534 Statuses=0009 0009 14:34:27 Msec=0 True Az=89.625 Ze=156.99 Az status=0009 Ze status=0009 14:34:27 Check angles 14:34:27 SkyScan query 14:34:27 SkyScan query done: ret=0 az=71.82<-4788 ze=135.585<-2961 Statuses=0009 0009 14:34:27 Msec=750 True Az=71.82 Ze=135.585 Az status=0009 Ze status=0009 14:34:28 Check angles 14:34:28 SkyScan query 14:34:28 SkyScan query done: ret=0 az=54.54<-3636 ze=114.63<-4358 Statuses=0009 0009 14:34:28 Msec=1500 True Az=54.54 Ze=114.63 Az status=0009 Ze status=0009 14:34:28 Check angles 14:34:28 SkyScan query 14:34:29 SkyScan query done: ret=0 az=40.965<-2731 ze=93.675<-5755 Statuses=0009 0009 14:34:29 Msec=2250 True Az=40.965 Ze=93.675 Az status=0009 Ze status=0009 14:34:29 Check angles 14:34:29 SkyScan query 14:34:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.705<-7153 Statuses=0008 0009 14:34:30 Msec=3000 True Az=40.995 Ze=72.705 Az status=0008 Ze status=0009 14:34:30 Check angles 14:34:30 SkyScan query 14:34:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 14:34:30 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 14:34:31 Check angles 14:34:31 SkyScan query 14:34:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:34:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:34:31 Message to Master queued w/err=0: serial=119549 error=0 14:34:36 Received message from Master: op=Filter serial=119550 14:34:36 Color wheel filter change from 0 to 0 14:34:36 FLIGetFilterPos err=0 currentPosition=0 14:34:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:36 Filter is already there-color wheel unchanged 14:34:36 Received message from Master: op=Shutter serial=119551 14:34:36 Shutter LASER close 14:34:37 Received message from Camera: op=State serial=119553 14:34:37 GetSingleValue result=40 Value=cccccccc 14:34:37 SkyScan query 14:34:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:34:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:37 Parameters OK 14:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:37 Set A/D data flow result=40 14:34:37 Set A/D channel type result=40 14:34:37 Set A/D encoding result=40 14:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:37 Set channel filter=0.000000e+000 result=40 14:34:37 Config A/D Result=40 14:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:37 Get A/D filter: -9.255963e+061 result=40 14:34:37 Get A/D value=-858993460 result=40 14:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:37 Parameters OK 14:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:37 Set A/D data flow result=40 14:34:37 Set A/D channel type result=40 14:34:37 Set A/D encoding result=40 14:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:37 Set channel filter=0.000000e+000 result=40 14:34:37 Config A/D Result=40 14:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:37 Get A/D filter: -9.255963e+061 result=40 14:34:37 Get A/D value=-858993460 result=40 14:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:37 Aux= 14:34:37 Message to Camera, serial 119553 queued 14:35:14 Received message from Master: op=PointingHead serial=119566 14:35:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:35:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:35:14 Point started: ret=0 14:35:14 point_skyscan result=0 14:35:15 Check angles 14:35:15 SkyScan query 14:35:16 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 14:35:16 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 14:35:16 Check angles 14:35:16 SkyScan query 14:35:16 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 14:35:16 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 14:35:17 Check angles 14:35:17 SkyScan query 14:35:17 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 14:35:17 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 14:35:17 Check angles 14:35:17 SkyScan query 14:35:18 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 14:35:18 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 14:35:18 Check angles 14:35:18 SkyScan query 14:35:19 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 14:35:19 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 14:35:19 Check angles 14:35:19 SkyScan query 14:35:19 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 14:35:19 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 14:35:20 Check angles 14:35:20 SkyScan query 14:35:20 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:35:20 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:35:20 Message to Master queued w/err=0: serial=119566 error=0 14:35:25 Received message from Master: op=Filter serial=119567 14:35:25 Color wheel filter change from 0 to 0 14:35:25 FLIGetFilterPos err=0 currentPosition=0 14:35:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:25 Filter is already there-color wheel unchanged 14:35:25 Received message from Master: op=Shutter serial=119568 14:35:25 Shutter LASER close 14:35:25 Received message from Camera: op=State serial=119570 14:35:25 GetSingleValue result=40 Value=cccccccc 14:35:25 SkyScan query 14:35:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:35:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:26 Parameters OK 14:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:26 Set A/D data flow result=40 14:35:26 Set A/D channel type result=40 14:35:26 Set A/D encoding result=40 14:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:26 Set channel filter=0.000000e+000 result=40 14:35:26 Config A/D Result=40 14:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:26 Get A/D filter: -9.255963e+061 result=40 14:35:26 Get A/D value=-858993460 result=40 14:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:26 Parameters OK 14:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:26 Set A/D data flow result=40 14:35:26 Set A/D channel type result=40 14:35:26 Set A/D encoding result=40 14:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:26 Set channel filter=0.000000e+000 result=40 14:35:26 Config A/D Result=40 14:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:26 Get A/D filter: -9.255963e+061 result=40 14:35:26 Get A/D value=-858993460 result=40 14:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:26 Aux= 14:35:26 Message to Camera, serial 119570 queued [UTC 2018-12-13 14:35:52] 14:36:03 Received message from Master: op=PointingHead serial=119583 14:36:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:36:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:36:03 Point started: ret=0 14:36:03 point_skyscan result=0 14:36:04 Check angles 14:36:04 SkyScan query 14:36:05 SkyScan query done: ret=0 az=134.52<-8968 ze=36.21<-9586 Statuses=0009 0009 14:36:05 Msec=0 True Az=134.52 Ze=36.21 Az status=0009 Ze status=0009 14:36:05 Check angles 14:36:05 SkyScan query 14:36:05 SkyScan query done: ret=0 az=117.015<-7801 ze=15.3<-10980 Statuses=0009 0009 14:36:05 Msec=750 True Az=117.015 Ze=15.3 Az status=0009 Ze status=0009 14:36:05 Check angles 14:36:05 SkyScan query 14:36:06 SkyScan query done: ret=0 az=99.6<-6640 ze=-5.685<-12379 Statuses=0009 0009 14:36:06 Msec=1500 True Az=99.6 Ze=-5.685 Az status=0009 Ze status=0009 14:36:06 Check angles 14:36:06 SkyScan query 14:36:07 SkyScan query done: ret=0 az=82.17<-5478 ze=-26.625<-13775 Statuses=0009 0009 14:36:07 Msec=2250 True Az=82.17 Ze=-26.625 Az status=0009 Ze status=0009 14:36:07 Check angles 14:36:07 SkyScan query 14:36:08 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.565<-14571 Statuses=0009 0008 14:36:08 Msec=3000 True Az=64.635 Ze=-38.565 Az status=0009 Ze status=0008 14:36:08 Check angles 14:36:08 SkyScan query 14:36:08 SkyScan query done: ret=0 az=46.755<-3117 ze=-38.535<-14569 Statuses=0009 0008 14:36:08 Msec=3750 True Az=46.755 Ze=-38.535 Az status=0009 Ze status=0008 14:36:08 Check angles 14:36:08 SkyScan query 14:36:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:36:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:36:09 Message to Master queued w/err=0: serial=119583 error=0 14:36:14 Received message from Master: op=Filter serial=119584 14:36:14 Color wheel filter change from 0 to 0 14:36:14 FLIGetFilterPos err=0 currentPosition=0 14:36:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:14 Filter is already there-color wheel unchanged 14:36:14 Received message from Master: op=Shutter serial=119585 14:36:14 Shutter LASER close 14:36:14 Received message from Camera: op=State serial=119587 14:36:14 GetSingleValue result=40 Value=cccccccc 14:36:14 SkyScan query 14:36:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:36:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:15 Parameters OK 14:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:15 Set A/D data flow result=40 14:36:15 Set A/D channel type result=40 14:36:15 Set A/D encoding result=40 14:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:15 Set channel filter=0.000000e+000 result=40 14:36:15 Config A/D Result=40 14:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:15 Get A/D filter: -9.255963e+061 result=40 14:36:15 Get A/D value=-858993460 result=40 14:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:15 Parameters OK 14:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:15 Set A/D data flow result=40 14:36:15 Set A/D channel type result=40 14:36:15 Set A/D encoding result=40 14:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:15 Set channel filter=0.000000e+000 result=40 14:36:15 Config A/D Result=40 14:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:15 Get A/D filter: -9.255963e+061 result=40 14:36:15 Get A/D value=-858993460 result=40 14:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:15 Aux= 14:36:15 Message to Camera, serial 119587 queued 14:36:52 Received message from Master: op=PointingHead serial=119600 14:36:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:36:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:36:52 Point started: ret=0 14:36:52 point_skyscan result=0 14:36:53 Check angles 14:36:53 SkyScan query 14:36:53 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.34<-16556 Statuses=0009 0009 14:36:53 Msec=0 True Az=64.005 Ze=-68.34 Az status=0009 Ze status=0009 14:36:54 Check angles 14:36:54 SkyScan query 14:36:54 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.34<-17956 Statuses=0009 0009 14:36:54 Msec=750 True Az=81.57 Ze=-89.34 Az status=0009 Ze status=0009 14:36:54 Check angles 14:36:54 SkyScan query 14:36:55 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.28<-19352 Statuses=0009 0009 14:36:55 Msec=1500 True Az=98.985 Ze=-110.28 Az status=0009 Ze status=0009 14:36:55 Check angles 14:36:55 SkyScan query 14:36:56 SkyScan query done: ret=0 az=116.43<-7762 ze=-131.22<-20748 Statuses=0009 0009 14:36:56 Msec=2250 True Az=116.43 Ze=-131.22 Az status=0009 Ze status=0009 14:36:56 Check angles 14:36:56 SkyScan query 14:36:56 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 14:36:56 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 14:36:57 Check angles 14:36:57 SkyScan query 14:36:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:36:57 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:36:57 Message to Master queued w/err=0: serial=119600 error=0 14:37:02 Received message from Master: op=Filter serial=119601 14:37:02 Color wheel filter change from 0 to 0 14:37:02 FLIGetFilterPos err=0 currentPosition=0 14:37:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:02 Filter is already there-color wheel unchanged 14:37:02 Received message from Master: op=Shutter serial=119602 14:37:02 Shutter LASER close 14:37:02 Received message from Camera: op=State serial=119604 14:37:02 GetSingleValue result=40 Value=cccccccc 14:37:02 SkyScan query 14:37:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:37:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:03 Parameters OK 14:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:03 Set A/D data flow result=40 14:37:03 Set A/D channel type result=40 14:37:03 Set A/D encoding result=40 14:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:03 Set channel filter=0.000000e+000 result=40 14:37:03 Config A/D Result=40 14:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:03 Get A/D filter: -9.255963e+061 result=40 14:37:03 Get A/D value=-858993460 result=40 14:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:03 Parameters OK 14:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:03 Set A/D data flow result=40 14:37:03 Set A/D channel type result=40 14:37:03 Set A/D encoding result=40 14:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:03 Set channel filter=0.000000e+000 result=40 14:37:03 Config A/D Result=40 14:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:03 Get A/D filter: -9.255963e+061 result=40 14:37:03 Get A/D value=-858993460 result=40 14:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:03 Aux= 14:37:03 Message to Camera, serial 119604 queued 14:37:40 Received message from Master: op=PointingHead serial=119617 14:37:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:37:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:37:40 Point started: ret=0 14:37:40 point_skyscan result=0 14:37:41 Check angles 14:37:41 SkyScan query 14:37:41 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 14:37:41 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 14:37:42 Check angles 14:37:42 SkyScan query 14:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:37:42 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:37:42 Message to Master queued w/err=0: serial=119617 error=0 14:37:47 Received message from Master: op=Filter serial=119618 14:37:47 Color wheel filter change from 0 to 0 14:37:47 FLIGetFilterPos err=0 currentPosition=0 14:37:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:47 Filter is already there-color wheel unchanged 14:37:47 Received message from Master: op=Shutter serial=119619 14:37:47 Shutter LASER open 14:37:48 Received message from Camera: op=State serial=119621 14:37:48 GetSingleValue result=40 Value=cccccccc 14:37:48 SkyScan query 14:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:37:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:48 Parameters OK 14:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:48 Set A/D data flow result=40 14:37:48 Set A/D channel type result=40 14:37:48 Set A/D encoding result=40 14:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:48 Set channel filter=0.000000e+000 result=40 14:37:48 Config A/D Result=40 14:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:48 Get A/D filter: -9.255963e+061 result=40 14:37:48 Get A/D value=-858993460 result=40 14:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:48 Parameters OK 14:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:48 Set A/D data flow result=40 14:37:48 Set A/D channel type result=40 14:37:48 Set A/D encoding result=40 14:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:48 Set channel filter=0.000000e+000 result=40 14:37:48 Config A/D Result=40 14:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:48 Get A/D filter: -9.255963e+061 result=40 14:37:48 Get A/D value=-858993460 result=40 14:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:48 Aux= 14:37:48 Message to Camera, serial 119621 queued 14:37:57 Received message from Master: op=Shutter serial=119631 14:37:57 Shutter LASER close 14:37:57 Received message from Master: op=PointingHead serial=119635 14:37:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:37:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:37:58 Point started: ret=0 14:37:58 point_skyscan result=0 14:37:58 Check angles 14:37:58 SkyScan query 14:37:59 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.875<-21525 Statuses=0009 0009 14:37:59 Msec=0 True Az=136.395 Ze=-142.875 Az status=0009 Ze status=0009 14:37:59 Check angles 14:37:59 SkyScan query 14:38:00 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.905<-20127 Statuses=0009 0009 14:38:00 Msec=750 True Az=153.825 Ze=-121.905 Az status=0009 Ze status=0009 14:38:00 Check angles 14:38:00 SkyScan query 14:38:00 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.95<-18730 Statuses=0009 0009 14:38:00 Msec=1500 True Az=171.42 Ze=-100.95 Az status=0009 Ze status=0009 14:38:01 Check angles 14:38:01 SkyScan query 14:38:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.055<-17337 Statuses=0008 0009 14:38:01 Msec=2250 True Az=176.01 Ze=-80.055 Az status=0008 Ze status=0009 14:38:01 Check angles 14:38:01 SkyScan query 14:38:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.04<-15936 Statuses=0008 0009 14:38:02 Msec=3000 True Az=176.01 Ze=-59.04 Az status=0008 Ze status=0009 14:38:02 Check angles 14:38:02 SkyScan query 14:38:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:38:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:38:03 Message to Master queued w/err=0: serial=119635 error=0 14:38:08 Received message from Master: op=Filter serial=119636 14:38:08 Color wheel filter change from 0 to 0 14:38:08 FLIGetFilterPos err=0 currentPosition=0 14:38:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:08 Filter is already there-color wheel unchanged 14:38:08 Received message from Master: op=Shutter serial=119637 14:38:08 Shutter LASER close 14:38:08 Received message from Camera: op=State serial=119639 14:38:08 GetSingleValue result=40 Value=cccccccc 14:38:08 SkyScan query 14:38:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:38:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:09 Parameters OK 14:38:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:09 Set A/D data flow result=40 14:38:09 Set A/D channel type result=40 14:38:09 Set A/D encoding result=40 14:38:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:09 Set channel filter=0.000000e+000 result=40 14:38:09 Config A/D Result=40 14:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:09 Get A/D filter: -9.255963e+061 result=40 14:38:09 Get A/D value=-858993460 result=40 14:38:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:09 Parameters OK 14:38:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:09 Set A/D data flow result=40 14:38:09 Set A/D channel type result=40 14:38:09 Set A/D encoding result=40 14:38:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:09 Set channel filter=0.000000e+000 result=40 14:38:09 Config A/D Result=40 14:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:09 Get A/D filter: -9.255963e+061 result=40 14:38:09 Get A/D value=-858993460 result=40 14:38:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:09 Aux= 14:38:09 Message to Camera, serial 119639 queued 14:38:45 Received message from Master: op=PointingHead serial=119652 14:38:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:38:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:38:46 Point started: ret=0 14:38:46 point_skyscan result=0 14:38:46 Check angles 14:38:46 SkyScan query 14:38:47 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.87<-13458 Statuses=0009 0009 14:38:47 Msec=0 True Az=153.105 Ze=-21.87 Az status=0009 Ze status=0009 14:38:47 Check angles 14:38:47 SkyScan query 14:38:48 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.87<-12058 Statuses=0009 0009 14:38:48 Msec=750 True Az=135.675 Ze=-0.87 Az status=0009 Ze status=0009 14:38:48 Check angles 14:38:48 SkyScan query 14:38:49 SkyScan query done: ret=0 az=118.095<-7873 ze=20.055<-10663 Statuses=0009 0009 14:38:49 Msec=1500 True Az=118.095 Ze=20.055 Az status=0009 Ze status=0009 14:38:49 Check angles 14:38:49 SkyScan query 14:38:49 SkyScan query done: ret=0 az=100.68<-6712 ze=41.025<-9265 Statuses=0009 0009 14:38:49 Msec=2250 True Az=100.68 Ze=41.025 Az status=0009 Ze status=0009 14:38:49 Check angles 14:38:49 SkyScan query 14:38:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 14:38:50 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 14:38:50 Check angles 14:38:50 SkyScan query 14:38:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:38:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:38:51 Message to Master queued w/err=0: serial=119652 error=0 14:38:56 Received message from Master: op=Filter serial=119653 14:38:56 Color wheel filter change from 0 to 0 14:38:56 FLIGetFilterPos err=0 currentPosition=0 14:38:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:56 Filter is already there-color wheel unchanged 14:38:56 Received message from Master: op=Shutter serial=119654 14:38:56 Shutter LASER close 14:38:56 Received message from Camera: op=State serial=119656 14:38:56 GetSingleValue result=40 Value=cccccccc 14:38:56 SkyScan query 14:38:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:38:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:57 Parameters OK 14:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:57 Set A/D data flow result=40 14:38:57 Set A/D channel type result=40 14:38:57 Set A/D encoding result=40 14:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:57 Set channel filter=0.000000e+000 result=40 14:38:57 Config A/D Result=40 14:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:57 Get A/D filter: -9.255963e+061 result=40 14:38:57 Get A/D value=-858993460 result=40 14:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:57 Parameters OK 14:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:57 Set A/D data flow result=40 14:38:57 Set A/D channel type result=40 14:38:57 Set A/D encoding result=40 14:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:57 Set channel filter=0.000000e+000 result=40 14:38:57 Config A/D Result=40 14:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:57 Get A/D filter: -9.255963e+061 result=40 14:38:57 Get A/D value=-858993460 result=40 14:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:57 Aux= 14:38:57 Message to Camera, serial 119656 queued 14:39:33 Received message from Master: op=PointingHead serial=119669 14:39:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:39:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:39:34 Point started: ret=0 14:39:34 point_skyscan result=0 14:39:35 Check angles 14:39:35 SkyScan query 14:39:35 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 14:39:35 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 14:39:35 Check angles 14:39:35 SkyScan query 14:39:36 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 14:39:36 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 14:39:36 Check angles 14:39:36 SkyScan query 14:39:37 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 14:39:37 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 14:39:37 Check angles 14:39:37 SkyScan query 14:39:37 SkyScan query done: ret=0 az=161.43<-10762 ze=38.505<-9433 Statuses=0009 0008 14:39:37 Msec=2250 True Az=161.43 Ze=38.505 Az status=0009 Ze status=0008 14:39:38 Check angles 14:39:38 SkyScan query 14:39:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:39:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:39:38 Check angles 14:39:38 SkyScan query 14:39:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:39:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:39:39 Message to Master queued w/err=0: serial=119669 error=0 14:39:44 Received message from Master: op=Filter serial=119670 14:39:44 Color wheel filter change from 0 to 0 14:39:44 FLIGetFilterPos err=0 currentPosition=0 14:39:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:44 Filter is already there-color wheel unchanged 14:39:44 Received message from Master: op=Shutter serial=119671 14:39:44 Shutter LASER close 14:39:44 Received message from Camera: op=State serial=119673 14:39:44 GetSingleValue result=40 Value=cccccccc 14:39:44 SkyScan query 14:39:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:39:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:45 Parameters OK 14:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:45 Set A/D data flow result=40 14:39:45 Set A/D channel type result=40 14:39:45 Set A/D encoding result=40 14:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:45 Set channel filter=0.000000e+000 result=40 14:39:45 Config A/D Result=40 14:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:45 Get A/D filter: -9.255963e+061 result=40 14:39:45 Get A/D value=-858993460 result=40 14:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:45 Parameters OK 14:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:45 Set A/D data flow result=40 14:39:45 Set A/D channel type result=40 14:39:45 Set A/D encoding result=40 14:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:45 Set channel filter=0.000000e+000 result=40 14:39:45 Config A/D Result=40 14:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:45 Get A/D filter: -9.255963e+061 result=40 14:39:45 Get A/D value=-858993460 result=40 14:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:45 Aux= 14:39:45 Message to Camera, serial 119673 queued 14:40:21 Received message from Master: op=PointingHead serial=119685 14:40:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:40:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:40:21 Point started: ret=0 14:40:21 point_skyscan result=0 14:40:22 Check angles 14:40:22 SkyScan query 14:40:22 SkyScan query done: ret=0 az=152.91<-10194 ze=8.595<-11427 Statuses=0009 0009 14:40:22 Msec=0 True Az=152.91 Ze=8.595 Az status=0009 Ze status=0009 14:40:22 Check angles 14:40:22 SkyScan query 14:40:23 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.345<-12823 Statuses=0009 0009 14:40:23 Msec=750 True Az=135.42 Ze=-12.345 Az status=0009 Ze status=0009 14:40:23 Check angles 14:40:23 SkyScan query 14:40:24 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.3<-14220 Statuses=0009 0009 14:40:24 Msec=1500 True Az=117.93 Ze=-33.3 Az status=0009 Ze status=0009 14:40:24 Check angles 14:40:24 SkyScan query 14:40:25 SkyScan query done: ret=0 az=100.545<-6703 ze=-51.525<-15435 Statuses=0009 0009 14:40:25 Msec=2250 True Az=100.545 Ze=-51.525 Az status=0009 Ze status=0009 14:40:25 Check angles 14:40:25 SkyScan query 14:40:25 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:40:25 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:40:25 Check angles 14:40:25 SkyScan query 14:40:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:40:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:40:26 Message to Master queued w/err=0: serial=119685 error=0 14:40:31 Received message from Master: op=Filter serial=119686 14:40:31 Color wheel filter change from 0 to 0 14:40:31 FLIGetFilterPos err=0 currentPosition=0 14:40:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:31 Filter is already there-color wheel unchanged 14:40:31 Received message from Master: op=Shutter serial=119687 14:40:31 Shutter LASER close 14:40:31 Received message from Camera: op=State serial=119689 14:40:31 GetSingleValue result=40 Value=cccccccc 14:40:31 SkyScan query 14:40:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:40:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:32 Parameters OK 14:40:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:32 Set A/D data flow result=40 14:40:32 Set A/D channel type result=40 14:40:32 Set A/D encoding result=40 14:40:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:32 Set channel filter=0.000000e+000 result=40 14:40:32 Config A/D Result=40 14:40:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:32 Get A/D filter: -9.255963e+061 result=40 14:40:32 Get A/D value=-858993460 result=40 14:40:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:32 Parameters OK 14:40:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:32 Set A/D data flow result=40 14:40:32 Set A/D channel type result=40 14:40:32 Set A/D encoding result=40 14:40:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:32 Set channel filter=0.000000e+000 result=40 14:40:32 Config A/D Result=40 14:40:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:32 Get A/D filter: -9.255963e+061 result=40 14:40:32 Get A/D value=-858993460 result=40 14:40:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:32 Aux= 14:40:32 Message to Camera, serial 119689 queued 14:41:09 Received message from Master: op=PointingHead serial=119702 14:41:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:41:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:41:09 Point started: ret=0 14:41:09 point_skyscan result=0 14:41:10 Check angles 14:41:10 SkyScan query 14:41:10 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.3<-17420 Statuses=0009 0009 14:41:10 Msec=0 True Az=108.99 Ze=-81.3 Az status=0009 Ze status=0009 14:41:10 Check angles 14:41:10 SkyScan query 14:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 14:41:11 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 14:41:11 Check angles 14:41:11 SkyScan query 14:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 14:41:12 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 14:41:12 Check angles 14:41:12 SkyScan query 14:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 14:41:13 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 14:41:13 Check angles 14:41:13 SkyScan query 14:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 14:41:13 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 14:41:13 Check angles 14:41:13 SkyScan query 14:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:41:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:41:14 Message to Master queued w/err=0: serial=119702 error=0 14:41:19 Received message from Master: op=Filter serial=119703 14:41:19 Color wheel filter change from 0 to 0 14:41:19 FLIGetFilterPos err=0 currentPosition=0 14:41:19 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:19 Filter is already there-color wheel unchanged 14:41:19 Received message from Master: op=Shutter serial=119704 14:41:19 Shutter LASER open 14:41:19 Received message from Camera: op=State serial=119706 14:41:19 GetSingleValue result=40 Value=cccccccc 14:41:19 SkyScan query 14:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:41:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:20 Parameters OK 14:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:20 Set A/D data flow result=40 14:41:20 Set A/D channel type result=40 14:41:20 Set A/D encoding result=40 14:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:20 Set channel filter=0.000000e+000 result=40 14:41:20 Config A/D Result=40 14:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:20 Get A/D filter: -9.255963e+061 result=40 14:41:20 Get A/D value=-858993460 result=40 14:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:20 Parameters OK 14:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:20 Set A/D data flow result=40 14:41:20 Set A/D channel type result=40 14:41:20 Set A/D encoding result=40 14:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:20 Set channel filter=0.000000e+000 result=40 14:41:20 Config A/D Result=40 14:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:20 Get A/D filter: -9.255963e+061 result=40 14:41:20 Get A/D value=-858993460 result=40 14:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:20 Aux= 14:41:20 Message to Camera, serial 119706 queued 14:41:28 Received message from Master: op=Shutter serial=119716 14:41:28 Shutter LASER close 14:41:29 Received message from Master: op=PointingHead serial=119720 14:41:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:41:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:41:29 Point started: ret=0 14:41:29 point_skyscan result=0 14:41:30 Check angles 14:41:30 SkyScan query 14:41:31 SkyScan query done: ret=0 az=89.865<-5991 ze=157.14<-1524 Statuses=0009 0009 14:41:31 Msec=0 True Az=89.865 Ze=157.14 Az status=0009 Ze status=0009 14:41:31 Check angles 14:41:31 SkyScan query 14:41:31 SkyScan query done: ret=0 az=72.015<-4801 ze=135.75<-2950 Statuses=0009 0009 14:41:31 Msec=750 True Az=72.015 Ze=135.75 Az status=0009 Ze status=0009 14:41:31 Check angles 14:41:31 SkyScan query 14:41:32 SkyScan query done: ret=0 az=54.405<-3627 ze=114.315<-4379 Statuses=0009 0009 14:41:32 Msec=1500 True Az=54.405 Ze=114.315 Az status=0009 Ze status=0009 14:41:32 Check angles 14:41:32 SkyScan query 14:41:33 SkyScan query done: ret=0 az=40.965<-2731 ze=93.42<-5772 Statuses=0009 0009 14:41:33 Msec=2250 True Az=40.965 Ze=93.42 Az status=0009 Ze status=0009 14:41:33 Check angles 14:41:33 SkyScan query 14:41:34 SkyScan query done: ret=0 az=40.995<-2733 ze=72.45<-7170 Statuses=0008 0009 14:41:34 Msec=3000 True Az=40.995 Ze=72.45 Az status=0008 Ze status=0009 14:41:34 Check angles 14:41:34 SkyScan query 14:41:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 14:41:34 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 14:41:34 Check angles 14:41:34 SkyScan query 14:41:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:41:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:41:35 Message to Master queued w/err=0: serial=119720 error=0 14:41:40 Received message from Master: op=Filter serial=119721 14:41:40 Color wheel filter change from 0 to 0 14:41:40 FLIGetFilterPos err=0 currentPosition=0 14:41:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:40 Filter is already there-color wheel unchanged 14:41:40 Received message from Master: op=Shutter serial=119722 14:41:40 Shutter LASER close 14:41:40 Received message from Camera: op=State serial=119724 14:41:40 GetSingleValue result=40 Value=cccccccc 14:41:40 SkyScan query 14:41:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:41:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:41 Parameters OK 14:41:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:41 Set A/D data flow result=40 14:41:41 Set A/D channel type result=40 14:41:41 Set A/D encoding result=40 14:41:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:41 Set channel filter=0.000000e+000 result=40 14:41:41 Config A/D Result=40 14:41:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:41 Get A/D filter: -9.255963e+061 result=40 14:41:41 Get A/D value=-858993460 result=40 14:41:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:41 Parameters OK 14:41:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:41 Set A/D data flow result=40 14:41:41 Set A/D channel type result=40 14:41:41 Set A/D encoding result=40 14:41:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:41 Set channel filter=0.000000e+000 result=40 14:41:41 Config A/D Result=40 14:41:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:41 Get A/D filter: -9.255963e+061 result=40 14:41:41 Get A/D value=-858993460 result=40 14:41:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:41 Aux= 14:41:41 Message to Camera, serial 119724 queued 14:42:18 Received message from Master: op=PointingHead serial=119737 14:42:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:42:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:42:18 Point started: ret=0 14:42:18 point_skyscan result=0 14:42:19 Check angles 14:42:19 SkyScan query 14:42:19 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 14:42:19 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 14:42:20 Check angles 14:42:20 SkyScan query 14:42:20 SkyScan query done: ret=0 az=81.6<-5440 ze=66.495<-7567 Statuses=0009 0008 14:42:20 Msec=750 True Az=81.6 Ze=66.495 Az status=0009 Ze status=0008 14:42:20 Check angles 14:42:20 SkyScan query 14:42:21 SkyScan query done: ret=0 az=99.12<-6608 ze=66.495<-7567 Statuses=0009 0008 14:42:21 Msec=1500 True Az=99.12 Ze=66.495 Az status=0009 Ze status=0008 14:42:21 Check angles 14:42:21 SkyScan query 14:42:22 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 14:42:22 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 14:42:22 Check angles 14:42:22 SkyScan query 14:42:22 SkyScan query done: ret=0 az=134.22<-8948 ze=66.495<-7567 Statuses=0009 0008 14:42:22 Msec=3000 True Az=134.22 Ze=66.495 Az status=0009 Ze status=0008 14:42:23 Check angles 14:42:23 SkyScan query 14:42:23 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 14:42:23 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 14:42:23 Check angles 14:42:23 SkyScan query 14:42:24 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:42:24 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:42:24 Message to Master queued w/err=0: serial=119737 error=0 14:42:29 Received message from Master: op=Filter serial=119738 14:42:29 Color wheel filter change from 0 to 0 14:42:29 FLIGetFilterPos err=0 currentPosition=0 14:42:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:29 Filter is already there-color wheel unchanged 14:42:29 Received message from Master: op=Shutter serial=119739 14:42:29 Shutter LASER close 14:42:29 Received message from Camera: op=State serial=119741 14:42:29 GetSingleValue result=40 Value=cccccccc 14:42:29 SkyScan query 14:42:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:42:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:30 Parameters OK 14:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:30 Set A/D data flow result=40 14:42:30 Set A/D channel type result=40 14:42:30 Set A/D encoding result=40 14:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:30 Set channel filter=0.000000e+000 result=40 14:42:30 Config A/D Result=40 14:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:30 Get A/D filter: -9.255963e+061 result=40 14:42:30 Get A/D value=-858993460 result=40 14:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:30 Parameters OK 14:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:30 Set A/D data flow result=40 14:42:30 Set A/D channel type result=40 14:42:30 Set A/D encoding result=40 14:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:30 Set channel filter=0.000000e+000 result=40 14:42:30 Config A/D Result=40 14:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:30 Get A/D filter: -9.255963e+061 result=40 14:42:30 Get A/D value=-858993460 result=40 14:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:30 Aux= 14:42:30 Message to Camera, serial 119741 queued 14:43:07 Received message from Master: op=PointingHead serial=119754 14:43:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:43:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:43:07 Point started: ret=0 14:43:07 point_skyscan result=0 14:43:08 Check angles 14:43:08 SkyScan query 14:43:08 SkyScan query done: ret=0 az=134.595<-8973 ze=36.315<-9579 Statuses=0009 0009 14:43:08 Msec=0 True Az=134.595 Ze=36.315 Az status=0009 Ze status=0009 14:43:08 Check angles 14:43:08 SkyScan query 14:43:09 SkyScan query done: ret=0 az=117.105<-7807 ze=15.405<-10973 Statuses=0009 0009 14:43:09 Msec=750 True Az=117.105 Ze=15.405 Az status=0009 Ze status=0009 14:43:09 Check angles 14:43:09 SkyScan query 14:43:10 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.595<-12373 Statuses=0009 0009 14:43:10 Msec=1500 True Az=99.78 Ze=-5.595 Az status=0009 Ze status=0009 14:43:10 Check angles 14:43:10 SkyScan query 14:43:11 SkyScan query done: ret=0 az=81.96<-5464 ze=-27.03<-13802 Statuses=0009 0009 14:43:11 Msec=2250 True Az=81.96 Ze=-27.03 Az status=0009 Ze status=0009 14:43:11 Check angles 14:43:11 SkyScan query 14:43:11 SkyScan query done: ret=0 az=64.02<-4268 ze=-38.58<-14572 Statuses=0009 0008 14:43:11 Msec=3000 True Az=64.02 Ze=-38.58 Az status=0009 Ze status=0008 14:43:12 Check angles 14:43:12 SkyScan query 14:43:12 SkyScan query done: ret=0 az=46.605<-3107 ze=-38.52<-14568 Statuses=0009 0008 14:43:12 Msec=3750 True Az=46.605 Ze=-38.52 Az status=0009 Ze status=0008 14:43:12 Check angles 14:43:12 SkyScan query 14:43:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:43:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:43:13 Message to Master queued w/err=0: serial=119754 error=0 14:43:18 Received message from Master: op=Filter serial=119755 14:43:18 Color wheel filter change from 0 to 0 14:43:18 FLIGetFilterPos err=0 currentPosition=0 14:43:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:18 Filter is already there-color wheel unchanged 14:43:18 Received message from Master: op=Shutter serial=119756 14:43:18 Shutter LASER close 14:43:18 Received message from Camera: op=State serial=119758 14:43:18 GetSingleValue result=40 Value=cccccccc 14:43:18 SkyScan query 14:43:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:43:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:19 Parameters OK 14:43:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:19 Set A/D data flow result=40 14:43:19 Set A/D channel type result=40 14:43:19 Set A/D encoding result=40 14:43:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:19 Set channel filter=0.000000e+000 result=40 14:43:19 Config A/D Result=40 14:43:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:19 Get A/D filter: -9.255963e+061 result=40 14:43:19 Get A/D value=-858993460 result=40 14:43:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:19 Parameters OK 14:43:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:19 Set A/D data flow result=40 14:43:19 Set A/D channel type result=40 14:43:19 Set A/D encoding result=40 14:43:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:19 Set channel filter=0.000000e+000 result=40 14:43:19 Config A/D Result=40 14:43:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:19 Get A/D filter: -9.255963e+061 result=40 14:43:19 Get A/D value=-858993460 result=40 14:43:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:19 Aux= 14:43:19 Message to Camera, serial 119758 queued 14:43:55 Received message from Master: op=PointingHead serial=119771 14:43:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:43:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:43:56 Point started: ret=0 14:43:56 point_skyscan result=0 14:43:57 Check angles 14:43:57 SkyScan query 14:43:57 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.475<-16565 Statuses=0009 0009 14:43:57 Msec=0 True Az=64.2 Ze=-68.475 Az status=0009 Ze status=0009 14:43:57 Check angles 14:43:57 SkyScan query 14:43:58 SkyScan query done: ret=0 az=82.065<-5471 ze=-89.895<-17993 Statuses=0009 0009 14:43:58 Msec=750 True Az=82.065 Ze=-89.895 Az status=0009 Ze status=0009 14:43:58 Check angles 14:43:58 SkyScan query 14:43:59 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.85<-19390 Statuses=0009 0009 14:43:59 Msec=1500 True Az=99.45 Ze=-110.85 Az status=0009 Ze status=0009 14:43:59 Check angles 14:43:59 SkyScan query 14:43:59 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.76<-20784 Statuses=0009 0009 14:43:59 Msec=2250 True Az=116.85 Ze=-131.76 Az status=0009 Ze status=0009 14:44:00 Check angles 14:44:00 SkyScan query 14:44:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 14:44:00 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 14:44:00 Check angles 14:44:00 SkyScan query 14:44:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:44:01 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:44:01 Message to Master queued w/err=0: serial=119771 error=0 14:44:06 Received message from Master: op=Filter serial=119772 14:44:06 Color wheel filter change from 0 to 0 14:44:06 FLIGetFilterPos err=0 currentPosition=0 14:44:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:06 Filter is already there-color wheel unchanged 14:44:06 Received message from Master: op=Shutter serial=119773 14:44:06 Shutter LASER close 14:44:06 Received message from Camera: op=State serial=119775 14:44:06 GetSingleValue result=40 Value=cccccccc 14:44:06 SkyScan query 14:44:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:44:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:07 Parameters OK 14:44:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:07 Set A/D data flow result=40 14:44:07 Set A/D channel type result=40 14:44:07 Set A/D encoding result=40 14:44:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:07 Set channel filter=0.000000e+000 result=40 14:44:07 Config A/D Result=40 14:44:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:07 Get A/D filter: -9.255963e+061 result=40 14:44:07 Get A/D value=-858993460 result=40 14:44:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:07 Parameters OK 14:44:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:07 Set A/D data flow result=40 14:44:07 Set A/D channel type result=40 14:44:07 Set A/D encoding result=40 14:44:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:07 Set channel filter=0.000000e+000 result=40 14:44:07 Config A/D Result=40 14:44:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:07 Get A/D filter: -9.255963e+061 result=40 14:44:07 Get A/D value=-858993460 result=40 14:44:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:07 Aux= 14:44:07 Message to Camera, serial 119775 queued 14:44:44 Received message from Master: op=PointingHead serial=119788 14:44:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:44:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:44:44 Point started: ret=0 14:44:44 point_skyscan result=0 14:44:45 Check angles 14:44:45 SkyScan query 14:44:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 14:44:45 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 14:44:45 Check angles 14:44:45 SkyScan query 14:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:44:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:44:46 Message to Master queued w/err=0: serial=119788 error=0 14:44:51 Received message from Master: op=Filter serial=119789 14:44:51 Color wheel filter change from 0 to 0 14:44:51 FLIGetFilterPos err=0 currentPosition=0 14:44:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:51 Filter is already there-color wheel unchanged 14:44:51 Received message from Master: op=Shutter serial=119790 14:44:51 Shutter LASER open 14:44:51 Received message from Camera: op=State serial=119792 14:44:51 GetSingleValue result=40 Value=cccccccc 14:44:51 SkyScan query 14:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:44:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:52 Parameters OK 14:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:52 Set A/D data flow result=40 14:44:52 Set A/D channel type result=40 14:44:52 Set A/D encoding result=40 14:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:52 Set channel filter=0.000000e+000 result=40 14:44:52 Config A/D Result=40 14:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:52 Get A/D filter: -9.255963e+061 result=40 14:44:52 Get A/D value=-858993460 result=40 14:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:52 Parameters OK 14:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:52 Set A/D data flow result=40 14:44:52 Set A/D channel type result=40 14:44:52 Set A/D encoding result=40 14:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:52 Set channel filter=0.000000e+000 result=40 14:44:52 Config A/D Result=40 14:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:52 Get A/D filter: -9.255963e+061 result=40 14:44:52 Get A/D value=-858993460 result=40 14:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:52 Aux= 14:44:52 Message to Camera, serial 119792 queued 14:44:59 Received message from Master: op=Shutter serial=119801 14:44:59 Shutter LASER close 14:45:00 Received message from Master: op=PointingHead serial=119805 14:45:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:45:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:45:00 Point started: ret=0 14:45:00 point_skyscan result=0 14:45:01 Check angles 14:45:01 SkyScan query 14:45:02 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.875<-21525 Statuses=0009 0009 14:45:02 Msec=0 True Az=136.365 Ze=-142.875 Az status=0009 Ze status=0009 14:45:02 Check angles 14:45:02 SkyScan query 14:45:02 SkyScan query done: ret=0 az=153.735<-10249 ze=-121.935<-20129 Statuses=0009 0009 14:45:02 Msec=750 True Az=153.735 Ze=-121.935 Az status=0009 Ze status=0009 14:45:03 Check angles 14:45:03 SkyScan query 14:45:03 SkyScan query done: ret=0 az=171.195<-11413 ze=-100.98<-18732 Statuses=0009 0009 14:45:03 Msec=1500 True Az=171.195 Ze=-100.98 Az status=0009 Ze status=0009 14:45:03 Check angles 14:45:03 SkyScan query 14:45:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.055<-17337 Statuses=0008 0009 14:45:04 Msec=2250 True Az=176.01 Ze=-80.055 Az status=0008 Ze status=0009 14:45:04 Check angles 14:45:04 SkyScan query 14:45:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.07<-15938 Statuses=0008 0009 14:45:05 Msec=3000 True Az=176.01 Ze=-59.07 Az status=0008 Ze status=0009 14:45:05 Check angles 14:45:05 SkyScan query 14:45:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:45:05 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:45:05 Message to Master queued w/err=0: serial=119805 error=0 14:45:10 Received message from Master: op=Filter serial=119806 14:45:10 Color wheel filter change from 0 to 0 14:45:10 FLIGetFilterPos err=0 currentPosition=0 14:45:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:10 Filter is already there-color wheel unchanged 14:45:11 Received message from Master: op=Shutter serial=119807 14:45:11 Shutter LASER close 14:45:11 Received message from Camera: op=State serial=119809 14:45:11 GetSingleValue result=40 Value=cccccccc 14:45:11 SkyScan query 14:45:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:45:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:11 Parameters OK 14:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:11 Set A/D data flow result=40 14:45:11 Set A/D channel type result=40 14:45:11 Set A/D encoding result=40 14:45:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:11 Set channel filter=0.000000e+000 result=40 14:45:11 Config A/D Result=40 14:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:11 Get A/D filter: -9.255963e+061 result=40 14:45:11 Get A/D value=-858993460 result=40 14:45:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:11 Parameters OK 14:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:11 Set A/D data flow result=40 14:45:11 Set A/D channel type result=40 14:45:11 Set A/D encoding result=40 14:45:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:11 Set channel filter=0.000000e+000 result=40 14:45:11 Config A/D Result=40 14:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:11 Get A/D filter: -9.255963e+061 result=40 14:45:11 Get A/D value=-858993460 result=40 14:45:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:11 Aux= 14:45:11 Message to Camera, serial 119809 queued 14:45:27 Received message from Master: op=Identify serial=119810 14:45:48 Received message from Master: op=PointingHead serial=119825 14:45:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:45:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:45:49 Point started: ret=0 14:45:49 point_skyscan result=0 14:45:49 Check angles 14:45:49 SkyScan query 14:45:50 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.54<-13436 Statuses=0009 0009 14:45:50 Msec=0 True Az=152.76 Ze=-21.54 Az status=0009 Ze status=0009 14:45:50 Check angles 14:45:50 SkyScan query 14:45:51 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.54<-12036 Statuses=0009 0009 14:45:51 Msec=750 True Az=135.36 Ze=-0.54 Az status=0009 Ze status=0009 14:45:51 Check angles [UTC 2018-12-13 14:45:51] 14:45:51 SkyScan query 14:45:51 SkyScan query done: ret=0 az=116.085<-7739 ze=22.53<-10498 Statuses=0009 0009 14:45:51 Msec=1500 True Az=116.085 Ze=22.53 Az status=0009 Ze status=0009 14:45:52 Check angles 14:45:52 SkyScan query 14:45:52 SkyScan query done: ret=0 az=100.11<-6674 ze=41.775<-9215 Statuses=0009 0009 14:45:52 Msec=2250 True Az=100.11 Ze=41.775 Az status=0009 Ze status=0009 14:45:52 Check angles 14:45:52 SkyScan query 14:45:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 14:45:53 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 14:45:53 Check angles 14:45:53 SkyScan query 14:45:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:45:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:45:54 Message to Master queued w/err=0: serial=119825 error=0 14:45:59 Received message from Master: op=Filter serial=119826 14:45:59 Color wheel filter change from 0 to 0 14:45:59 FLIGetFilterPos err=0 currentPosition=0 14:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:59 Filter is already there-color wheel unchanged 14:45:59 Received message from Master: op=Shutter serial=119827 14:45:59 Shutter LASER close 14:45:59 Received message from Camera: op=State serial=119829 14:45:59 GetSingleValue result=40 Value=cccccccc 14:45:59 SkyScan query 14:45:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:45:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:59 Parameters OK 14:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:59 Set A/D data flow result=40 14:45:59 Set A/D channel type result=40 14:45:59 Set A/D encoding result=40 14:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:59 Set channel filter=0.000000e+000 result=40 14:45:59 Config A/D Result=40 14:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:59 Get A/D filter: -9.255963e+061 result=40 14:45:59 Get A/D value=-858993460 result=40 14:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:59 Parameters OK 14:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:59 Set A/D data flow result=40 14:45:59 Set A/D channel type result=40 14:45:59 Set A/D encoding result=40 14:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:59 Set channel filter=0.000000e+000 result=40 14:45:59 Config A/D Result=40 14:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:59 Get A/D filter: -9.255963e+061 result=40 14:45:59 Get A/D value=-858993460 result=40 14:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:59 Aux= 14:45:59 Message to Camera, serial 119829 queued 14:46:36 Received message from Master: op=PointingHead serial=119842 14:46:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:46:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:46:37 Point started: ret=0 14:46:37 point_skyscan result=0 14:46:37 Check angles 14:46:37 SkyScan query 14:46:38 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 14:46:38 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 14:46:38 Check angles 14:46:38 SkyScan query 14:46:39 SkyScan query done: ret=0 az=127.17<-8478 ze=38.505<-9433 Statuses=0009 0008 14:46:39 Msec=750 True Az=127.17 Ze=38.505 Az status=0009 Ze status=0008 14:46:39 Check angles 14:46:39 SkyScan query 14:46:39 SkyScan query done: ret=0 az=145.05<-9670 ze=38.505<-9433 Statuses=0009 0008 14:46:39 Msec=1500 True Az=145.05 Ze=38.505 Az status=0009 Ze status=0008 14:46:40 Check angles 14:46:40 SkyScan query 14:46:40 SkyScan query done: ret=0 az=162.54<-10836 ze=38.505<-9433 Statuses=0009 0008 14:46:40 Msec=2250 True Az=162.54 Ze=38.505 Az status=0009 Ze status=0008 14:46:40 Check angles 14:46:40 SkyScan query 14:46:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:46:41 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:46:41 Check angles 14:46:41 SkyScan query 14:46:42 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:46:42 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:46:42 Message to Master queued w/err=0: serial=119842 error=0 14:46:47 Received message from Master: op=Filter serial=119843 14:46:47 Color wheel filter change from 0 to 0 14:46:47 FLIGetFilterPos err=0 currentPosition=0 14:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:47 Filter is already there-color wheel unchanged 14:46:47 Received message from Master: op=Shutter serial=119844 14:46:47 Shutter LASER close 14:46:47 Received message from Camera: op=State serial=119846 14:46:47 GetSingleValue result=40 Value=cccccccc 14:46:47 SkyScan query 14:46:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:46:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:48 Parameters OK 14:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:48 Set A/D data flow result=40 14:46:48 Set A/D channel type result=40 14:46:48 Set A/D encoding result=40 14:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:48 Set channel filter=0.000000e+000 result=40 14:46:48 Config A/D Result=40 14:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:48 Get A/D filter: -9.255963e+061 result=40 14:46:48 Get A/D value=-858993460 result=40 14:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:48 Parameters OK 14:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:48 Set A/D data flow result=40 14:46:48 Set A/D channel type result=40 14:46:48 Set A/D encoding result=40 14:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:48 Set channel filter=0.000000e+000 result=40 14:46:48 Config A/D Result=40 14:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:48 Get A/D filter: -9.255963e+061 result=40 14:46:48 Get A/D value=-858993460 result=40 14:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:48 Aux= 14:46:48 Message to Camera, serial 119846 queued 14:47:24 Received message from Master: op=PointingHead serial=119859 14:47:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:47:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:47:25 Point started: ret=0 14:47:25 point_skyscan result=0 14:47:25 Check angles 14:47:25 SkyScan query 14:47:26 SkyScan query done: ret=0 az=152.76<-10184 ze=8.46<-11436 Statuses=0009 0009 14:47:26 Msec=0 True Az=152.76 Ze=8.46 Az status=0009 Ze status=0009 14:47:26 Check angles 14:47:26 SkyScan query 14:47:27 SkyScan query done: ret=0 az=134.925<-8995 ze=-12.915<-12861 Statuses=0009 0009 14:47:27 Msec=750 True Az=134.925 Ze=-12.915 Az status=0009 Ze status=0009 14:47:27 Check angles 14:47:27 SkyScan query 14:47:28 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.915<-14261 Statuses=0009 0009 14:47:28 Msec=1500 True Az=117.465 Ze=-33.915 Az status=0009 Ze status=0009 14:47:28 Check angles 14:47:28 SkyScan query 14:47:28 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.57<-15438 Statuses=0009 0009 14:47:28 Msec=2250 True Az=100.065 Ze=-51.57 Az status=0009 Ze status=0009 14:47:28 Check angles 14:47:28 SkyScan query 14:47:29 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:47:29 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:47:29 Check angles 14:47:29 SkyScan query 14:47:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:47:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:47:30 Message to Master queued w/err=0: serial=119859 error=0 14:47:35 Received message from Master: op=Filter serial=119860 14:47:35 Color wheel filter change from 0 to 0 14:47:35 FLIGetFilterPos err=0 currentPosition=0 14:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:35 Filter is already there-color wheel unchanged 14:47:35 Received message from Master: op=Shutter serial=119861 14:47:35 Shutter LASER close 14:47:35 Received message from Camera: op=State serial=119863 14:47:35 GetSingleValue result=40 Value=cccccccc 14:47:35 SkyScan query 14:47:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:36 Parameters OK 14:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:36 Set A/D data flow result=40 14:47:36 Set A/D channel type result=40 14:47:36 Set A/D encoding result=40 14:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:36 Set channel filter=0.000000e+000 result=40 14:47:36 Config A/D Result=40 14:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:36 Get A/D filter: -9.255963e+061 result=40 14:47:36 Get A/D value=-858993460 result=40 14:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:36 Parameters OK 14:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:36 Set A/D data flow result=40 14:47:36 Set A/D channel type result=40 14:47:36 Set A/D encoding result=40 14:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:36 Set channel filter=0.000000e+000 result=40 14:47:36 Config A/D Result=40 14:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:36 Get A/D filter: -9.255963e+061 result=40 14:47:36 Get A/D value=-858993460 result=40 14:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:36 Aux= 14:47:36 Message to Camera, serial 119863 queued 14:48:12 Received message from Master: op=PointingHead serial=119876 14:48:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:48:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:48:13 Point started: ret=0 14:48:13 point_skyscan result=0 14:48:14 Check angles 14:48:14 SkyScan query 14:48:14 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.345<-17423 Statuses=0009 0009 14:48:14 Msec=0 True Az=109.155 Ze=-81.345 Az status=0009 Ze status=0009 14:48:14 Check angles 14:48:14 SkyScan query 14:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.315<-18821 Statuses=0008 0009 14:48:15 Msec=750 True Az=112.995 Ze=-102.315 Az status=0008 Ze status=0009 14:48:15 Check angles 14:48:15 SkyScan query 14:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.27<-20218 Statuses=0008 0009 14:48:16 Msec=1500 True Az=112.995 Ze=-123.27 Az status=0008 Ze status=0009 14:48:16 Check angles 14:48:16 SkyScan query 14:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.24<-21616 Statuses=0008 0009 14:48:16 Msec=2250 True Az=112.995 Ze=-144.24 Az status=0008 Ze status=0009 14:48:17 Check angles 14:48:17 SkyScan query 14:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.165<-23011 Statuses=0008 0009 14:48:17 Msec=3000 True Az=112.995 Ze=-165.165 Az status=0008 Ze status=0009 14:48:17 Check angles 14:48:17 SkyScan query 14:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:48:18 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:48:18 Message to Master queued w/err=0: serial=119876 error=0 14:48:23 Received message from Master: op=Filter serial=119877 14:48:23 Color wheel filter change from 0 to 0 14:48:23 FLIGetFilterPos err=0 currentPosition=0 14:48:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:23 Filter is already there-color wheel unchanged 14:48:23 Received message from Master: op=Shutter serial=119878 14:48:23 Shutter LASER open 14:48:23 Received message from Camera: op=State serial=119880 14:48:23 GetSingleValue result=40 Value=cccccccc 14:48:23 SkyScan query 14:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:48:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:24 Parameters OK 14:48:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:24 Set A/D data flow result=40 14:48:24 Set A/D channel type result=40 14:48:24 Set A/D encoding result=40 14:48:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:24 Set channel filter=0.000000e+000 result=40 14:48:24 Config A/D Result=40 14:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:24 Get A/D filter: -9.255963e+061 result=40 14:48:24 Get A/D value=-858993460 result=40 14:48:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:24 Parameters OK 14:48:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:24 Set A/D data flow result=40 14:48:24 Set A/D channel type result=40 14:48:24 Set A/D encoding result=40 14:48:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:24 Set channel filter=0.000000e+000 result=40 14:48:24 Config A/D Result=40 14:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:24 Get A/D filter: -9.255963e+061 result=40 14:48:24 Get A/D value=-858993460 result=40 14:48:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:24 Aux= 14:48:24 Message to Camera, serial 119880 queued 14:48:32 Received message from Master: op=Shutter serial=119890 14:48:32 Shutter LASER close 14:48:33 Received message from Master: op=PointingHead serial=119894 14:48:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:48:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:48:33 Point started: ret=0 14:48:33 point_skyscan result=0 14:48:34 Check angles 14:48:34 SkyScan query 14:48:34 SkyScan query done: ret=0 az=90.015<-6001 ze=157.365<-1509 Statuses=0009 0009 14:48:34 Msec=0 True Az=90.015 Ze=157.365 Az status=0009 Ze status=0009 14:48:34 Check angles 14:48:34 SkyScan query 14:48:35 SkyScan query done: ret=0 az=72.555<-4837 ze=136.395<-2907 Statuses=0009 0009 14:48:35 Msec=750 True Az=72.555 Ze=136.395 Az status=0009 Ze status=0009 14:48:35 Check angles 14:48:35 SkyScan query 14:48:36 SkyScan query done: ret=0 az=55.11<-3674 ze=115.47<-4302 Statuses=0009 0009 14:48:36 Msec=1500 True Az=55.11 Ze=115.47 Az status=0009 Ze status=0009 14:48:36 Check angles 14:48:36 SkyScan query 14:48:37 SkyScan query done: ret=0 az=40.92<-2728 ze=94.485<-5701 Statuses=0009 0009 14:48:37 Msec=2250 True Az=40.92 Ze=94.485 Az status=0009 Ze status=0009 14:48:37 Check angles 14:48:37 SkyScan query 14:48:37 SkyScan query done: ret=0 az=40.995<-2733 ze=73.56<-7096 Statuses=0008 0009 14:48:37 Msec=3000 True Az=40.995 Ze=73.56 Az status=0008 Ze status=0009 14:48:37 Check angles 14:48:37 SkyScan query 14:48:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.92<-8472 Statuses=0008 0009 14:48:38 Msec=3750 True Az=40.995 Ze=52.92 Az status=0008 Ze status=0009 14:48:38 Check angles 14:48:38 SkyScan query 14:48:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:48:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:48:39 Message to Master queued w/err=0: serial=119894 error=0 14:48:44 Received message from Master: op=Filter serial=119895 14:48:44 Color wheel filter change from 0 to 0 14:48:44 FLIGetFilterPos err=0 currentPosition=0 14:48:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:44 Filter is already there-color wheel unchanged 14:48:44 Received message from Master: op=Shutter serial=119896 14:48:44 Shutter LASER close 14:48:44 Received message from Camera: op=State serial=119898 14:48:44 GetSingleValue result=40 Value=cccccccc 14:48:44 SkyScan query 14:48:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:48:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:45 Parameters OK 14:48:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:45 Set A/D data flow result=40 14:48:45 Set A/D channel type result=40 14:48:45 Set A/D encoding result=40 14:48:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:45 Set channel filter=0.000000e+000 result=40 14:48:45 Config A/D Result=40 14:48:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:45 Get A/D filter: -9.255963e+061 result=40 14:48:45 Get A/D value=-858993460 result=40 14:48:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:45 Parameters OK 14:48:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:45 Set A/D data flow result=40 14:48:45 Set A/D channel type result=40 14:48:45 Set A/D encoding result=40 14:48:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:45 Set channel filter=0.000000e+000 result=40 14:48:45 Config A/D Result=40 14:48:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:45 Get A/D filter: -9.255963e+061 result=40 14:48:45 Get A/D value=-858993460 result=40 14:48:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:45 Aux= 14:48:45 Message to Camera, serial 119898 queued 14:49:22 Received message from Master: op=PointingHead serial=119911 14:49:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:49:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:49:22 Point started: ret=0 14:49:22 point_skyscan result=0 14:49:23 Check angles 14:49:23 SkyScan query 14:49:23 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 14:49:23 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 14:49:23 Check angles 14:49:23 SkyScan query 14:49:24 SkyScan query done: ret=0 az=81.81<-5454 ze=66.495<-7567 Statuses=0009 0008 14:49:24 Msec=750 True Az=81.81 Ze=66.495 Az status=0009 Ze status=0008 14:49:24 Check angles 14:49:24 SkyScan query 14:49:25 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 14:49:25 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 14:49:25 Check angles 14:49:25 SkyScan query 14:49:26 SkyScan query done: ret=0 az=117.195<-7813 ze=66.495<-7567 Statuses=0009 0008 14:49:26 Msec=2250 True Az=117.195 Ze=66.495 Az status=0009 Ze status=0008 14:49:26 Check angles 14:49:26 SkyScan query 14:49:26 SkyScan query done: ret=0 az=135.06<-9004 ze=66.495<-7567 Statuses=0009 0008 14:49:26 Msec=3000 True Az=135.06 Ze=66.495 Az status=0009 Ze status=0008 14:49:27 Check angles 14:49:27 SkyScan query 14:49:27 SkyScan query done: ret=0 az=152.43<-10162 ze=66.495<-7567 Statuses=0009 0008 14:49:27 Msec=3750 True Az=152.43 Ze=66.495 Az status=0009 Ze status=0008 14:49:27 Check angles 14:49:27 SkyScan query 14:49:28 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:49:28 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:49:28 Message to Master queued w/err=0: serial=119911 error=0 14:49:33 Received message from Master: op=Filter serial=119912 14:49:33 Color wheel filter change from 0 to 0 14:49:33 FLIGetFilterPos err=0 currentPosition=0 14:49:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:33 Filter is already there-color wheel unchanged 14:49:33 Received message from Master: op=Shutter serial=119913 14:49:33 Shutter LASER close 14:49:33 Received message from Camera: op=State serial=119915 14:49:33 GetSingleValue result=40 Value=cccccccc 14:49:33 SkyScan query 14:49:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:49:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:34 Parameters OK 14:49:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:34 Set A/D data flow result=40 14:49:34 Set A/D channel type result=40 14:49:34 Set A/D encoding result=40 14:49:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:34 Set channel filter=0.000000e+000 result=40 14:49:34 Config A/D Result=40 14:49:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:34 Get A/D filter: -9.255963e+061 result=40 14:49:34 Get A/D value=-858993460 result=40 14:49:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:34 Parameters OK 14:49:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:34 Set A/D data flow result=40 14:49:34 Set A/D channel type result=40 14:49:34 Set A/D encoding result=40 14:49:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:34 Set channel filter=0.000000e+000 result=40 14:49:34 Config A/D Result=40 14:49:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:34 Get A/D filter: -9.255963e+061 result=40 14:49:34 Get A/D value=-858993460 result=40 14:49:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:34 Aux= 14:49:34 Message to Camera, serial 119915 queued 14:50:11 Received message from Master: op=PointingHead serial=119928 14:50:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:50:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:50:11 Point started: ret=0 14:50:11 point_skyscan result=0 14:50:12 Check angles 14:50:12 SkyScan query 14:50:12 SkyScan query done: ret=0 az=134.985<-8999 ze=36.72<-9552 Statuses=0009 0009 14:50:12 Msec=0 True Az=134.985 Ze=36.72 Az status=0009 Ze status=0009 14:50:12 Check angles 14:50:12 SkyScan query 14:50:13 SkyScan query done: ret=0 az=117.54<-7836 ze=15.765<-10949 Statuses=0009 0009 14:50:13 Msec=750 True Az=117.54 Ze=15.765 Az status=0009 Ze status=0009 14:50:13 Check angles 14:50:13 SkyScan query 14:50:14 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.64<-12376 Statuses=0009 0009 14:50:14 Msec=1500 True Az=99.795 Ze=-5.64 Az status=0009 Ze status=0009 14:50:14 Check angles 14:50:14 SkyScan query 14:50:14 SkyScan query done: ret=0 az=81.96<-5464 ze=-27.06<-13804 Statuses=0009 0009 14:50:14 Msec=2250 True Az=81.96 Ze=-27.06 Az status=0009 Ze status=0009 14:50:15 Check angles 14:50:15 SkyScan query 14:50:15 SkyScan query done: ret=0 az=64.395<-4293 ze=-38.58<-14572 Statuses=0009 0008 14:50:15 Msec=3000 True Az=64.395 Ze=-38.58 Az status=0009 Ze status=0008 14:50:15 Check angles 14:50:15 SkyScan query 14:50:16 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.52<-14568 Statuses=0009 0008 14:50:16 Msec=3750 True Az=46.98 Ze=-38.52 Az status=0009 Ze status=0008 14:50:16 Check angles 14:50:16 SkyScan query 14:50:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:50:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:50:17 Message to Master queued w/err=0: serial=119928 error=0 14:50:22 Received message from Master: op=Filter serial=119929 14:50:22 Color wheel filter change from 0 to 0 14:50:22 FLIGetFilterPos err=0 currentPosition=0 14:50:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:22 Filter is already there-color wheel unchanged 14:50:22 Received message from Master: op=Shutter serial=119930 14:50:22 Shutter LASER close 14:50:22 Received message from Camera: op=State serial=119932 14:50:22 GetSingleValue result=40 Value=cccccccc 14:50:22 SkyScan query 14:50:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:50:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:23 Parameters OK 14:50:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:23 Set A/D data flow result=40 14:50:23 Set A/D channel type result=40 14:50:23 Set A/D encoding result=40 14:50:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:23 Set channel filter=0.000000e+000 result=40 14:50:23 Config A/D Result=40 14:50:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:23 Get A/D filter: -9.255963e+061 result=40 14:50:23 Get A/D value=-858993460 result=40 14:50:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:23 Parameters OK 14:50:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:23 Set A/D data flow result=40 14:50:23 Set A/D channel type result=40 14:50:23 Set A/D encoding result=40 14:50:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:23 Set channel filter=0.000000e+000 result=40 14:50:23 Config A/D Result=40 14:50:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:23 Get A/D filter: -9.255963e+061 result=40 14:50:23 Get A/D value=-858993460 result=40 14:50:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:23 Aux= 14:50:23 Message to Camera, serial 119932 queued 14:50:59 Received message from Master: op=PointingHead serial=119945 14:50:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:50:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:51:00 Point started: ret=0 14:51:00 point_skyscan result=0 14:51:00 Check angles 14:51:00 SkyScan query 14:51:01 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.13<-16542 Statuses=0009 0009 14:51:01 Msec=0 True Az=63.885 Ze=-68.13 Az status=0009 Ze status=0009 14:51:01 Check angles 14:51:01 SkyScan query 14:51:02 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.13<-17942 Statuses=0009 0009 14:51:02 Msec=750 True Az=81.33 Ze=-89.13 Az status=0009 Ze status=0009 14:51:02 Check angles 14:51:02 SkyScan query 14:51:03 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.535<-19369 Statuses=0009 0009 14:51:03 Msec=1500 True Az=99.15 Ze=-110.535 Az status=0009 Ze status=0009 14:51:03 Check angles 14:51:03 SkyScan query 14:51:03 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.865<-20791 Statuses=0009 0009 14:51:03 Msec=2250 True Az=117.105 Ze=-131.865 Az status=0009 Ze status=0009 14:51:03 Check angles 14:51:03 SkyScan query 14:51:04 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 14:51:04 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 14:51:04 Check angles 14:51:04 SkyScan query 14:51:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:51:05 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:51:05 Message to Master queued w/err=0: serial=119945 error=0 14:51:10 Received message from Master: op=Filter serial=119946 14:51:10 Color wheel filter change from 0 to 0 14:51:10 FLIGetFilterPos err=0 currentPosition=0 14:51:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:10 Filter is already there-color wheel unchanged 14:51:10 Received message from Master: op=Shutter serial=119947 14:51:10 Shutter LASER close 14:51:10 Received message from Camera: op=State serial=119949 14:51:10 GetSingleValue result=40 Value=cccccccc 14:51:10 SkyScan query 14:51:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:51:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:11 Parameters OK 14:51:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:11 Set A/D data flow result=40 14:51:11 Set A/D channel type result=40 14:51:11 Set A/D encoding result=40 14:51:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:11 Set channel filter=0.000000e+000 result=40 14:51:11 Config A/D Result=40 14:51:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:11 Get A/D filter: -9.255963e+061 result=40 14:51:11 Get A/D value=-858993460 result=40 14:51:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:11 Parameters OK 14:51:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:11 Set A/D data flow result=40 14:51:11 Set A/D channel type result=40 14:51:11 Set A/D encoding result=40 14:51:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:11 Set channel filter=0.000000e+000 result=40 14:51:11 Config A/D Result=40 14:51:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:11 Get A/D filter: -9.255963e+061 result=40 14:51:11 Get A/D value=-858993460 result=40 14:51:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:11 Aux= 14:51:11 Message to Camera, serial 119949 queued 14:51:47 Received message from Master: op=PointingHead serial=119962 14:51:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:51:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:51:48 Point started: ret=0 14:51:48 point_skyscan result=0 14:51:49 Check angles 14:51:49 SkyScan query 14:51:49 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 14:51:49 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 14:51:49 Check angles 14:51:49 SkyScan query 14:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:51:50 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:51:50 Message to Master queued w/err=0: serial=119962 error=0 14:51:55 Received message from Master: op=Filter serial=119963 14:51:55 Color wheel filter change from 0 to 0 14:51:55 FLIGetFilterPos err=0 currentPosition=0 14:51:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:55 Filter is already there-color wheel unchanged 14:51:55 Received message from Master: op=Shutter serial=119964 14:51:55 Shutter LASER open 14:51:55 Received message from Camera: op=State serial=119966 14:51:55 GetSingleValue result=40 Value=cccccccc 14:51:55 SkyScan query 14:51:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:51:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:56 Parameters OK 14:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:56 Set A/D data flow result=40 14:51:56 Set A/D channel type result=40 14:51:56 Set A/D encoding result=40 14:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:56 Set channel filter=0.000000e+000 result=40 14:51:56 Config A/D Result=40 14:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:56 Get A/D filter: -9.255963e+061 result=40 14:51:56 Get A/D value=-858993460 result=40 14:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:56 Parameters OK 14:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:56 Set A/D data flow result=40 14:51:56 Set A/D channel type result=40 14:51:56 Set A/D encoding result=40 14:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:56 Set channel filter=0.000000e+000 result=40 14:51:56 Config A/D Result=40 14:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:56 Get A/D filter: -9.255963e+061 result=40 14:51:56 Get A/D value=-858993460 result=40 14:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:56 Aux= 14:51:56 Message to Camera, serial 119966 queued 14:52:04 Received message from Master: op=Shutter serial=119976 14:52:04 Shutter LASER close 14:52:05 Received message from Master: op=PointingHead serial=119980 14:52:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:52:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:52:05 Point started: ret=0 14:52:05 point_skyscan result=0 14:52:06 Check angles 14:52:06 SkyScan query 14:52:06 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.475<-21565 Statuses=0009 0009 14:52:06 Msec=0 True Az=135.765 Ze=-143.475 Az status=0009 Ze status=0009 14:52:07 Check angles 14:52:07 SkyScan query 14:52:07 SkyScan query done: ret=0 az=153.255<-10217 ze=-122.505<-20167 Statuses=0009 0009 14:52:07 Msec=750 True Az=153.255 Ze=-122.505 Az status=0009 Ze status=0009 14:52:07 Check angles 14:52:07 SkyScan query 14:52:08 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.13<-18742 Statuses=0009 0009 14:52:08 Msec=1500 True Az=171.12 Ze=-101.13 Az status=0009 Ze status=0009 14:52:08 Check angles 14:52:08 SkyScan query 14:52:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.19<-17346 Statuses=0008 0009 14:52:09 Msec=2250 True Az=176.01 Ze=-80.19 Az status=0008 Ze status=0009 14:52:09 Check angles 14:52:09 SkyScan query 14:52:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.205<-15947 Statuses=0008 0009 14:52:10 Msec=3000 True Az=176.01 Ze=-59.205 Az status=0008 Ze status=0009 14:52:10 Check angles 14:52:10 SkyScan query 14:52:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:52:10 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:52:10 Message to Master queued w/err=0: serial=119980 error=0 14:52:15 Received message from Master: op=Filter serial=119981 14:52:15 Color wheel filter change from 0 to 0 14:52:15 FLIGetFilterPos err=0 currentPosition=0 14:52:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:15 Filter is already there-color wheel unchanged 14:52:15 Received message from Master: op=Shutter serial=119982 14:52:15 Shutter LASER close 14:52:16 Received message from Camera: op=State serial=119984 14:52:16 GetSingleValue result=40 Value=cccccccc 14:52:16 SkyScan query 14:52:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:52:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:16 Parameters OK 14:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:16 Set A/D data flow result=40 14:52:16 Set A/D channel type result=40 14:52:16 Set A/D encoding result=40 14:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:16 Set channel filter=0.000000e+000 result=40 14:52:16 Config A/D Result=40 14:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:16 Get A/D filter: -9.255963e+061 result=40 14:52:16 Get A/D value=-858993460 result=40 14:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:16 Parameters OK 14:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:16 Set A/D data flow result=40 14:52:16 Set A/D channel type result=40 14:52:16 Set A/D encoding result=40 14:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:16 Set channel filter=0.000000e+000 result=40 14:52:16 Config A/D Result=40 14:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:16 Get A/D filter: -9.255963e+061 result=40 14:52:16 Get A/D value=-858993460 result=40 14:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:16 Aux= 14:52:16 Message to Camera, serial 119984 queued 14:52:53 Received message from Master: op=PointingHead serial=119997 14:52:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:52:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:52:53 Point started: ret=0 14:52:53 point_skyscan result=0 14:52:54 Check angles 14:52:54 SkyScan query 14:52:55 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.75<-13450 Statuses=0009 0009 14:52:55 Msec=0 True Az=152.97 Ze=-21.75 Az status=0009 Ze status=0009 14:52:55 Check angles 14:52:55 SkyScan query 14:52:56 SkyScan query done: ret=0 az=135.075<-9005 ze=-0.3<-12020 Statuses=0009 0009 14:52:56 Msec=750 True Az=135.075 Ze=-0.3 Az status=0009 Ze status=0009 14:52:56 Check angles 14:52:56 SkyScan query 14:52:56 SkyScan query done: ret=0 az=117.555<-7837 ze=20.64<-10624 Statuses=0009 0009 14:52:56 Msec=1500 True Az=117.555 Ze=20.64 Az status=0009 Ze status=0009 14:52:56 Check angles 14:52:56 SkyScan query 14:52:57 SkyScan query done: ret=0 az=100.17<-6678 ze=41.61<-9226 Statuses=0009 0009 14:52:57 Msec=2250 True Az=100.17 Ze=41.61 Az status=0009 Ze status=0009 14:52:57 Check angles 14:52:57 SkyScan query 14:52:58 SkyScan query done: ret=0 az=86.01<-5734 ze=51.525<-8565 Statuses=0009 0008 14:52:58 Msec=3000 True Az=86.01 Ze=51.525 Az status=0009 Ze status=0008 14:52:58 Check angles 14:52:58 SkyScan query 14:52:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:52:59 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 14:52:59 Message to Master queued w/err=0: serial=119997 error=0 14:53:04 Received message from Master: op=Filter serial=119998 14:53:04 Color wheel filter change from 0 to 0 14:53:04 FLIGetFilterPos err=0 currentPosition=0 14:53:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:04 Filter is already there-color wheel unchanged 14:53:04 Received message from Master: op=Shutter serial=119999 14:53:04 Shutter LASER close 14:53:04 Received message from Camera: op=State serial=120001 14:53:04 GetSingleValue result=40 Value=cccccccc 14:53:04 SkyScan query 14:53:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 14:53:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:04 Parameters OK 14:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:04 Set A/D data flow result=40 14:53:04 Set A/D channel type result=40 14:53:04 Set A/D encoding result=40 14:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:04 Set channel filter=0.000000e+000 result=40 14:53:04 Config A/D Result=40 14:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:04 Get A/D filter: -9.255963e+061 result=40 14:53:04 Get A/D value=-858993460 result=40 14:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:04 Parameters OK 14:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:04 Set A/D data flow result=40 14:53:04 Set A/D channel type result=40 14:53:04 Set A/D encoding result=40 14:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:04 Set channel filter=0.000000e+000 result=40 14:53:04 Config A/D Result=40 14:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:04 Get A/D filter: -9.255963e+061 result=40 14:53:04 Get A/D value=-858993460 result=40 14:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:04 Aux= 14:53:04 Message to Camera, serial 120001 queued 14:53:41 Received message from Master: op=PointingHead serial=120014 14:53:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:53:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:53:41 Point started: ret=0 14:53:41 point_skyscan result=0 14:53:42 Check angles 14:53:42 SkyScan query 14:53:43 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 14:53:43 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 14:53:43 Check angles 14:53:43 SkyScan query 14:53:44 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 14:53:44 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 14:53:44 Check angles 14:53:44 SkyScan query 14:53:44 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 14:53:44 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 14:53:44 Check angles 14:53:44 SkyScan query 14:53:45 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 14:53:45 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 14:53:45 Check angles 14:53:45 SkyScan query 14:53:46 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:53:46 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:53:46 Check angles 14:53:46 SkyScan query 14:53:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:53:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:53:47 Message to Master queued w/err=0: serial=120014 error=0 14:53:52 Received message from Master: op=Filter serial=120015 14:53:52 Color wheel filter change from 0 to 0 14:53:52 FLIGetFilterPos err=0 currentPosition=0 14:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:52 Filter is already there-color wheel unchanged 14:53:52 Received message from Master: op=Shutter serial=120016 14:53:52 Shutter LASER close 14:53:52 Received message from Camera: op=State serial=120018 14:53:52 GetSingleValue result=40 Value=cccccccc 14:53:52 SkyScan query 14:53:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:53:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:52 Parameters OK 14:53:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:52 Set A/D data flow result=40 14:53:52 Set A/D channel type result=40 14:53:52 Set A/D encoding result=40 14:53:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:52 Set channel filter=0.000000e+000 result=40 14:53:52 Config A/D Result=40 14:53:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:52 Get A/D filter: -9.255963e+061 result=40 14:53:52 Get A/D value=-858993460 result=40 14:53:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:52 Parameters OK 14:53:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:52 Set A/D data flow result=40 14:53:52 Set A/D channel type result=40 14:53:52 Set A/D encoding result=40 14:53:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:52 Set channel filter=0.000000e+000 result=40 14:53:52 Config A/D Result=40 14:53:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:52 Get A/D filter: -9.255963e+061 result=40 14:53:52 Get A/D value=-858993460 result=40 14:53:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:52 Aux= 14:53:52 Message to Camera, serial 120018 queued 14:54:28 Received message from Master: op=PointingHead serial=120030 14:54:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:54:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:54:29 Point started: ret=0 14:54:29 point_skyscan result=0 14:54:29 Check angles 14:54:29 SkyScan query 14:54:30 SkyScan query done: ret=0 az=153.15<-10210 ze=8.865<-11409 Statuses=0009 0009 14:54:30 Msec=0 True Az=153.15 Ze=8.865 Az status=0009 Ze status=0009 14:54:30 Check angles 14:54:30 SkyScan query 14:54:31 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.495<-12833 Statuses=0009 0009 14:54:31 Msec=750 True Az=135.285 Ze=-12.495 Az status=0009 Ze status=0009 14:54:31 Check angles 14:54:31 SkyScan query 14:54:31 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.465<-14231 Statuses=0009 0009 14:54:31 Msec=1500 True Az=117.75 Ze=-33.465 Az status=0009 Ze status=0009 14:54:32 Check angles 14:54:32 SkyScan query 14:54:32 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.555<-15437 Statuses=0009 0009 14:54:32 Msec=2250 True Az=100.05 Ze=-51.555 Az status=0009 Ze status=0009 14:54:32 Check angles 14:54:32 SkyScan query 14:54:33 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:54:33 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:54:33 Check angles 14:54:33 SkyScan query 14:54:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:54:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:54:34 Message to Master queued w/err=0: serial=120030 error=0 14:54:39 Received message from Master: op=Filter serial=120031 14:54:39 Color wheel filter change from 0 to 0 14:54:39 FLIGetFilterPos err=0 currentPosition=0 14:54:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:39 Filter is already there-color wheel unchanged 14:54:39 Received message from Master: op=Shutter serial=120032 14:54:39 Shutter LASER close 14:54:39 Received message from Camera: op=State serial=120034 14:54:39 GetSingleValue result=40 Value=cccccccc 14:54:39 SkyScan query 14:54:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:54:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:40 Parameters OK 14:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:40 Set A/D data flow result=40 14:54:40 Set A/D channel type result=40 14:54:40 Set A/D encoding result=40 14:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:40 Set channel filter=0.000000e+000 result=40 14:54:40 Config A/D Result=40 14:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:40 Get A/D filter: -9.255963e+061 result=40 14:54:40 Get A/D value=-858993460 result=40 14:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:40 Parameters OK 14:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:40 Set A/D data flow result=40 14:54:40 Set A/D channel type result=40 14:54:40 Set A/D encoding result=40 14:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:40 Set channel filter=0.000000e+000 result=40 14:54:40 Config A/D Result=40 14:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:40 Get A/D filter: -9.255963e+061 result=40 14:54:40 Get A/D value=-858993460 result=40 14:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:40 Aux= 14:54:40 Message to Camera, serial 120034 queued 14:55:16 Received message from Master: op=PointingHead serial=120047 14:55:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:55:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:55:17 Point started: ret=0 14:55:17 point_skyscan result=0 14:55:17 Check angles 14:55:17 SkyScan query 14:55:18 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.315<-17421 Statuses=0009 0009 14:55:18 Msec=0 True Az=109.125 Ze=-81.315 Az status=0009 Ze status=0009 14:55:18 Check angles 14:55:18 SkyScan query 14:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 14:55:19 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 14:55:19 Check angles 14:55:19 SkyScan query 14:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.08<-20272 Statuses=0008 0009 14:55:20 Msec=1500 True Az=112.995 Ze=-124.08 Az status=0008 Ze status=0009 14:55:20 Check angles 14:55:20 SkyScan query 14:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 14:55:20 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 14:55:20 Check angles 14:55:20 SkyScan query 14:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.975<-23065 Statuses=0008 0009 14:55:21 Msec=3000 True Az=112.995 Ze=-165.975 Az status=0008 Ze status=0009 14:55:21 Check angles 14:55:21 SkyScan query 14:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:55:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:55:22 Message to Master queued w/err=0: serial=120047 error=0 14:55:27 Received message from Master: op=Filter serial=120048 14:55:27 Color wheel filter change from 0 to 0 14:55:27 FLIGetFilterPos err=0 currentPosition=0 14:55:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:27 Filter is already there-color wheel unchanged 14:55:27 Received message from Master: op=Shutter serial=120049 14:55:27 Shutter LASER open 14:55:27 Received message from Camera: op=State serial=120051 14:55:27 GetSingleValue result=40 Value=cccccccc 14:55:27 SkyScan query 14:55:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:55:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:28 Parameters OK 14:55:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:28 Set A/D data flow result=40 14:55:28 Set A/D channel type result=40 14:55:28 Set A/D encoding result=40 14:55:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:28 Set channel filter=0.000000e+000 result=40 14:55:28 Config A/D Result=40 14:55:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:28 Get A/D filter: -9.255963e+061 result=40 14:55:28 Get A/D value=-858993460 result=40 14:55:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:28 Parameters OK 14:55:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:28 Set A/D data flow result=40 14:55:28 Set A/D channel type result=40 14:55:28 Set A/D encoding result=40 14:55:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:28 Set channel filter=0.000000e+000 result=40 14:55:28 Config A/D Result=40 14:55:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:28 Get A/D filter: -9.255963e+061 result=40 14:55:28 Get A/D value=-858993460 result=40 14:55:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:28 Aux= 14:55:28 Message to Camera, serial 120051 queued 14:55:36 Received message from Master: op=Shutter serial=120061 14:55:36 Shutter LASER close 14:55:37 Received message from Master: op=PointingHead serial=120065 14:55:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:55:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:55:37 Point started: ret=0 14:55:37 point_skyscan result=0 14:55:38 Check angles 14:55:38 SkyScan query 14:55:38 SkyScan query done: ret=0 az=89.805<-5987 ze=157.08<-1528 Statuses=0009 0009 14:55:38 Msec=0 True Az=89.805 Ze=157.08 Az status=0009 Ze status=0009 14:55:38 Check angles 14:55:38 SkyScan query 14:55:39 SkyScan query done: ret=0 az=72.285<-4819 ze=136.11<-2926 Statuses=0009 0009 14:55:39 Msec=750 True Az=72.285 Ze=136.11 Az status=0009 Ze status=0009 14:55:39 Check angles 14:55:39 SkyScan query 14:55:40 SkyScan query done: ret=0 az=54.645<-3643 ze=114.705<-4353 Statuses=0009 0009 14:55:40 Msec=1500 True Az=54.645 Ze=114.705 Az status=0009 Ze status=0009 [UTC 2018-12-13 14:55:40] 14:55:40 Check angles 14:55:40 SkyScan query 14:55:41 SkyScan query done: ret=0 az=41.025<-2735 ze=92.01<-5866 Statuses=0009 0009 14:55:41 Msec=2250 True Az=41.025 Ze=92.01 Az status=0009 Ze status=0009 14:55:41 Check angles 14:55:41 SkyScan query 14:55:41 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 14:55:41 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 14:55:41 Check angles 14:55:41 SkyScan query 14:55:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 14:55:42 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 14:55:42 Check angles 14:55:42 SkyScan query 14:55:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:55:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:55:43 Message to Master queued w/err=0: serial=120065 error=0 14:55:48 Received message from Master: op=Filter serial=120066 14:55:48 Color wheel filter change from 0 to 0 14:55:48 FLIGetFilterPos err=0 currentPosition=0 14:55:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:48 Filter is already there-color wheel unchanged 14:55:48 Received message from Master: op=Shutter serial=120067 14:55:48 Shutter LASER close 14:55:48 Received message from Camera: op=State serial=120069 14:55:48 GetSingleValue result=40 Value=cccccccc 14:55:48 SkyScan query 14:55:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:55:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:49 Parameters OK 14:55:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:49 Set A/D data flow result=40 14:55:49 Set A/D channel type result=40 14:55:49 Set A/D encoding result=40 14:55:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:49 Set channel filter=0.000000e+000 result=40 14:55:49 Config A/D Result=40 14:55:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:49 Get A/D filter: -9.255963e+061 result=40 14:55:49 Get A/D value=-858993460 result=40 14:55:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:49 Parameters OK 14:55:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:49 Set A/D data flow result=40 14:55:49 Set A/D channel type result=40 14:55:49 Set A/D encoding result=40 14:55:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:49 Set channel filter=0.000000e+000 result=40 14:55:49 Config A/D Result=40 14:55:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:49 Get A/D filter: -9.255963e+061 result=40 14:55:49 Get A/D value=-858993460 result=40 14:55:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:49 Aux= 14:55:49 Message to Camera, serial 120069 queued [UTC 2018-12-13 14:55:52] 14:56:26 Received message from Master: op=PointingHead serial=120082 14:56:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:56:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:56:26 Point started: ret=0 14:56:26 point_skyscan result=0 14:56:27 Check angles 14:56:27 SkyScan query 14:56:27 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 14:56:27 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 14:56:27 Check angles 14:56:27 SkyScan query 14:56:28 SkyScan query done: ret=0 az=81.63<-5442 ze=66.495<-7567 Statuses=0009 0008 14:56:28 Msec=750 True Az=81.63 Ze=66.495 Az status=0009 Ze status=0008 14:56:28 Check angles 14:56:28 SkyScan query 14:56:29 SkyScan query done: ret=0 az=99.12<-6608 ze=66.495<-7567 Statuses=0009 0008 14:56:29 Msec=1500 True Az=99.12 Ze=66.495 Az status=0009 Ze status=0008 14:56:29 Check angles 14:56:29 SkyScan query 14:56:29 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 14:56:29 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 14:56:30 Check angles 14:56:30 SkyScan query 14:56:30 SkyScan query done: ret=0 az=134.52<-8968 ze=66.495<-7567 Statuses=0009 0008 14:56:30 Msec=3000 True Az=134.52 Ze=66.495 Az status=0009 Ze status=0008 14:56:30 Check angles 14:56:30 SkyScan query 14:56:31 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 14:56:31 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 14:56:31 Check angles 14:56:31 SkyScan query 14:56:32 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:56:32 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:56:32 Message to Master queued w/err=0: serial=120082 error=0 14:56:37 Received message from Master: op=Filter serial=120083 14:56:37 Color wheel filter change from 0 to 0 14:56:37 FLIGetFilterPos err=0 currentPosition=0 14:56:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:37 Filter is already there-color wheel unchanged 14:56:37 Received message from Master: op=Shutter serial=120084 14:56:37 Shutter LASER close 14:56:37 Received message from Camera: op=State serial=120086 14:56:37 GetSingleValue result=40 Value=cccccccc 14:56:37 SkyScan query 14:56:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:56:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:38 Parameters OK 14:56:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:38 Set A/D data flow result=40 14:56:38 Set A/D channel type result=40 14:56:38 Set A/D encoding result=40 14:56:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:38 Set channel filter=0.000000e+000 result=40 14:56:38 Config A/D Result=40 14:56:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:38 Get A/D filter: -9.255963e+061 result=40 14:56:38 Get A/D value=-858993460 result=40 14:56:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:38 Parameters OK 14:56:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:38 Set A/D data flow result=40 14:56:38 Set A/D channel type result=40 14:56:38 Set A/D encoding result=40 14:56:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:38 Set channel filter=0.000000e+000 result=40 14:56:38 Config A/D Result=40 14:56:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:38 Get A/D filter: -9.255963e+061 result=40 14:56:38 Get A/D value=-858993460 result=40 14:56:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:38 Aux= 14:56:38 Message to Camera, serial 120086 queued 14:57:14 Received message from Master: op=PointingHead serial=120099 14:57:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:57:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:57:15 Point started: ret=0 14:57:15 point_skyscan result=0 14:57:15 Check angles 14:57:15 SkyScan query 14:57:16 SkyScan query done: ret=0 az=134.97<-8998 ze=36.645<-9557 Statuses=0009 0009 14:57:16 Msec=0 True Az=134.97 Ze=36.645 Az status=0009 Ze status=0009 14:57:16 Check angles 14:57:16 SkyScan query 14:57:17 SkyScan query done: ret=0 az=117.48<-7832 ze=15.72<-10952 Statuses=0009 0009 14:57:17 Msec=750 True Az=117.48 Ze=15.72 Az status=0009 Ze status=0009 14:57:17 Check angles 14:57:17 SkyScan query 14:57:18 SkyScan query done: ret=0 az=100.095<-6673 ze=-5.265<-12351 Statuses=0009 0009 14:57:18 Msec=1500 True Az=100.095 Ze=-5.265 Az status=0009 Ze status=0009 14:57:18 Check angles 14:57:18 SkyScan query 14:57:18 SkyScan query done: ret=0 az=82.59<-5506 ze=-26.205<-13747 Statuses=0009 0009 14:57:18 Msec=2250 True Az=82.59 Ze=-26.205 Az status=0009 Ze status=0009 14:57:18 Check angles 14:57:18 SkyScan query 14:57:19 SkyScan query done: ret=0 az=65.1<-4340 ze=-38.565<-14571 Statuses=0009 0008 14:57:19 Msec=3000 True Az=65.1 Ze=-38.565 Az status=0009 Ze status=0008 14:57:19 Check angles 14:57:19 SkyScan query 14:57:20 SkyScan query done: ret=0 az=47.655<-3177 ze=-38.535<-14569 Statuses=0009 0008 14:57:20 Msec=3750 True Az=47.655 Ze=-38.535 Az status=0009 Ze status=0008 14:57:20 Check angles 14:57:20 SkyScan query 14:57:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:57:21 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:57:21 Message to Master queued w/err=0: serial=120099 error=0 14:57:26 Received message from Master: op=Filter serial=120100 14:57:26 Color wheel filter change from 0 to 0 14:57:26 FLIGetFilterPos err=0 currentPosition=0 14:57:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:26 Filter is already there-color wheel unchanged 14:57:26 Received message from Master: op=Shutter serial=120101 14:57:26 Shutter LASER close 14:57:26 Received message from Camera: op=State serial=120103 14:57:26 GetSingleValue result=40 Value=cccccccc 14:57:26 SkyScan query 14:57:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:57:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:26 Parameters OK 14:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:26 Set A/D data flow result=40 14:57:26 Set A/D channel type result=40 14:57:26 Set A/D encoding result=40 14:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:26 Set channel filter=0.000000e+000 result=40 14:57:26 Config A/D Result=40 14:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:26 Get A/D filter: -9.255963e+061 result=40 14:57:26 Get A/D value=-858993460 result=40 14:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:26 Parameters OK 14:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:26 Set A/D data flow result=40 14:57:26 Set A/D channel type result=40 14:57:26 Set A/D encoding result=40 14:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:26 Set channel filter=0.000000e+000 result=40 14:57:26 Config A/D Result=40 14:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:26 Get A/D filter: -9.255963e+061 result=40 14:57:26 Get A/D value=-858993460 result=40 14:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:26 Aux= 14:57:26 Message to Camera, serial 120103 queued 14:58:03 Received message from Master: op=PointingHead serial=120116 14:58:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:58:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:58:04 Point started: ret=0 14:58:04 point_skyscan result=0 14:58:04 Check angles 14:58:04 SkyScan query 14:58:05 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.04<-16536 Statuses=0009 0009 14:58:05 Msec=0 True Az=63.81 Ze=-68.04 Az status=0009 Ze status=0009 14:58:05 Check angles 14:58:05 SkyScan query 14:58:06 SkyScan query done: ret=0 az=81.105<-5407 ze=-89.025<-17935 Statuses=0009 0009 14:58:06 Msec=750 True Az=81.105 Ze=-89.025 Az status=0009 Ze status=0009 14:58:06 Check angles 14:58:06 SkyScan query 14:58:06 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.505<-19367 Statuses=0009 0009 14:58:06 Msec=1500 True Az=99.12 Ze=-110.505 Az status=0009 Ze status=0009 14:58:07 Check angles 14:58:07 SkyScan query 14:58:07 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.385<-20759 Statuses=0009 0009 14:58:07 Msec=2250 True Az=116.61 Ze=-131.385 Az status=0009 Ze status=0009 14:58:07 Check angles 14:58:07 SkyScan query 14:58:08 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 14:58:08 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 14:58:08 Check angles 14:58:08 SkyScan query 14:58:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 14:58:09 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 14:58:09 Message to Master queued w/err=0: serial=120116 error=0 14:58:14 Received message from Master: op=Filter serial=120117 14:58:14 Color wheel filter change from 0 to 0 14:58:14 FLIGetFilterPos err=0 currentPosition=0 14:58:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:14 Filter is already there-color wheel unchanged 14:58:14 Received message from Master: op=Shutter serial=120118 14:58:14 Shutter LASER close 14:58:14 Received message from Camera: op=State serial=120120 14:58:14 GetSingleValue result=40 Value=cccccccc 14:58:14 SkyScan query 14:58:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:58:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:14 Parameters OK 14:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:14 Set A/D data flow result=40 14:58:14 Set A/D channel type result=40 14:58:14 Set A/D encoding result=40 14:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:14 Set channel filter=0.000000e+000 result=40 14:58:14 Config A/D Result=40 14:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:14 Get A/D filter: -9.255963e+061 result=40 14:58:14 Get A/D value=-858993460 result=40 14:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:14 Parameters OK 14:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:14 Set A/D data flow result=40 14:58:14 Set A/D channel type result=40 14:58:14 Set A/D encoding result=40 14:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:14 Set channel filter=0.000000e+000 result=40 14:58:14 Config A/D Result=40 14:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:14 Get A/D filter: -9.255963e+061 result=40 14:58:14 Get A/D value=-858993460 result=40 14:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:14 Aux= 14:58:14 Message to Camera, serial 120120 queued 14:58:51 Received message from Master: op=PointingHead serial=120133 14:58:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:58:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:58:52 Point started: ret=0 14:58:52 point_skyscan result=0 14:58:52 Check angles 14:58:52 SkyScan query 14:58:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 14:58:53 Msec=0 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 14:58:53 Check angles 14:58:53 SkyScan query 14:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:58:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:58:54 Message to Master queued w/err=0: serial=120133 error=0 14:58:59 Received message from Master: op=Filter serial=120134 14:58:59 Color wheel filter change from 0 to 0 14:58:59 FLIGetFilterPos err=0 currentPosition=0 14:58:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:59 Filter is already there-color wheel unchanged 14:58:59 Received message from Master: op=Shutter serial=120135 14:58:59 Shutter LASER open 14:58:59 Received message from Camera: op=State serial=120137 14:58:59 GetSingleValue result=40 Value=cccccccc 14:58:59 SkyScan query 14:59:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:00 Parameters OK 14:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:00 Set A/D data flow result=40 14:59:00 Set A/D channel type result=40 14:59:00 Set A/D encoding result=40 14:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:00 Set channel filter=0.000000e+000 result=40 14:59:00 Config A/D Result=40 14:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:00 Get A/D filter: -9.255963e+061 result=40 14:59:00 Get A/D value=-858993460 result=40 14:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:00 Parameters OK 14:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:00 Set A/D data flow result=40 14:59:00 Set A/D channel type result=40 14:59:00 Set A/D encoding result=40 14:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:00 Set channel filter=0.000000e+000 result=40 14:59:00 Config A/D Result=40 14:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:00 Get A/D filter: -9.255963e+061 result=40 14:59:00 Get A/D value=-858993460 result=40 14:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:00 Aux= 14:59:00 Message to Camera, serial 120137 queued 14:59:07 Received message from Master: op=Shutter serial=120146 14:59:07 Shutter LASER close 14:59:08 Received message from Master: op=PointingHead serial=120150 14:59:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:59:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:59:08 Point started: ret=0 14:59:08 point_skyscan result=0 14:59:09 Check angles 14:59:09 SkyScan query 14:59:09 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.565<-21571 Statuses=0009 0009 14:59:09 Msec=0 True Az=135.705 Ze=-143.565 Az status=0009 Ze status=0009 14:59:10 Check angles 14:59:10 SkyScan query 14:59:10 SkyScan query done: ret=0 az=153.165<-10211 ze=-122.61<-20174 Statuses=0009 0009 14:59:10 Msec=750 True Az=153.165 Ze=-122.61 Az status=0009 Ze status=0009 14:59:10 Check angles 14:59:10 SkyScan query 14:59:11 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.7<-18780 Statuses=0009 0009 14:59:11 Msec=1500 True Az=170.745 Ze=-101.7 Az status=0009 Ze status=0009 14:59:11 Check angles 14:59:11 SkyScan query 14:59:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.655<-17377 Statuses=0008 0009 14:59:12 Msec=2250 True Az=176.01 Ze=-80.655 Az status=0008 Ze status=0009 14:59:12 Check angles 14:59:12 SkyScan query 14:59:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.745<-15983 Statuses=0008 0009 14:59:12 Msec=3000 True Az=176.01 Ze=-59.745 Az status=0008 Ze status=0009 14:59:13 Check angles 14:59:13 SkyScan query 14:59:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:59:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:59:13 Message to Master queued w/err=0: serial=120150 error=0 14:59:18 Received message from Master: op=Filter serial=120151 14:59:18 Color wheel filter change from 0 to 0 14:59:18 FLIGetFilterPos err=0 currentPosition=0 14:59:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:18 Filter is already there-color wheel unchanged 14:59:18 Received message from Master: op=Shutter serial=120152 14:59:18 Shutter LASER close 14:59:18 Received message from Camera: op=State serial=120154 14:59:18 GetSingleValue result=40 Value=cccccccc 14:59:18 SkyScan query 14:59:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:59:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:19 Parameters OK 14:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:19 Set A/D data flow result=40 14:59:19 Set A/D channel type result=40 14:59:19 Set A/D encoding result=40 14:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:19 Set channel filter=0.000000e+000 result=40 14:59:19 Config A/D Result=40 14:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:19 Get A/D filter: -9.255963e+061 result=40 14:59:19 Get A/D value=-858993460 result=40 14:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:19 Parameters OK 14:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:19 Set A/D data flow result=40 14:59:19 Set A/D channel type result=40 14:59:19 Set A/D encoding result=40 14:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:19 Set channel filter=0.000000e+000 result=40 14:59:19 Config A/D Result=40 14:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:19 Get A/D filter: -9.255963e+061 result=40 14:59:19 Get A/D value=-858993460 result=40 14:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:19 Aux= 14:59:19 Message to Camera, serial 120154 queued 14:59:56 Received message from Master: op=PointingHead serial=120167 14:59:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:59:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:59:56 Point started: ret=0 14:59:56 point_skyscan result=0 14:59:57 Check angles 14:59:57 SkyScan query 14:59:58 SkyScan query done: ret=0 az=152.43<-10162 ze=-21.165<-13411 Statuses=0009 0009 14:59:58 Msec=0 True Az=152.43 Ze=-21.165 Az status=0009 Ze status=0009 14:59:58 Check angles 14:59:58 SkyScan query 14:59:58 SkyScan query done: ret=0 az=134.865<-8991 ze=-0.135<-12009 Statuses=0009 0009 14:59:58 Msec=750 True Az=134.865 Ze=-0.135 Az status=0009 Ze status=0009 14:59:59 Check angles 14:59:59 SkyScan query 14:59:59 SkyScan query done: ret=0 az=117.09<-7806 ze=21.18<-10588 Statuses=0009 0009 14:59:59 Msec=1500 True Az=117.09 Ze=21.18 Az status=0009 Ze status=0009 14:59:59 Check angles 14:59:59 SkyScan query 15:00:00 SkyScan query done: ret=0 az=99.27<-6618 ze=42.495<-9167 Statuses=0009 0009 15:00:00 Msec=2250 True Az=99.27 Ze=42.495 Az status=0009 Ze status=0009 15:00:00 Check angles 15:00:00 SkyScan query 15:00:01 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 15:00:01 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 15:00:01 Check angles 15:00:01 SkyScan query 15:00:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:00:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:00:01 Message to Master queued w/err=0: serial=120167 error=0 15:00:06 Received message from Master: op=Filter serial=120168 15:00:06 Color wheel filter change from 0 to 0 15:00:06 FLIGetFilterPos err=0 currentPosition=0 15:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:06 Filter is already there-color wheel unchanged 15:00:07 Received message from Master: op=Shutter serial=120169 15:00:07 Shutter LASER close 15:00:07 Received message from Camera: op=State serial=120171 15:00:07 GetSingleValue result=40 Value=cccccccc 15:00:07 SkyScan query 15:00:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:07 Parameters OK 15:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:07 Set A/D data flow result=40 15:00:07 Set A/D channel type result=40 15:00:07 Set A/D encoding result=40 15:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:07 Set channel filter=0.000000e+000 result=40 15:00:07 Config A/D Result=40 15:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:07 Get A/D filter: -9.255963e+061 result=40 15:00:07 Get A/D value=-858993460 result=40 15:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:07 Parameters OK 15:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:07 Set A/D data flow result=40 15:00:07 Set A/D channel type result=40 15:00:07 Set A/D encoding result=40 15:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:07 Set channel filter=0.000000e+000 result=40 15:00:07 Config A/D Result=40 15:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:07 Get A/D filter: -9.255963e+061 result=40 15:00:07 Get A/D value=-858993460 result=40 15:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:07 Aux= 15:00:07 Message to Camera, serial 120171 queued 15:00:44 Received message from Master: op=PointingHead serial=120184 15:00:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:00:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:00:44 Point started: ret=0 15:00:44 point_skyscan result=0 15:00:45 Check angles 15:00:45 SkyScan query 15:00:46 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 15:00:46 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 15:00:46 Check angles 15:00:46 SkyScan query 15:00:46 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 15:00:46 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 15:00:47 Check angles 15:00:47 SkyScan query 15:00:47 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 15:00:47 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 15:00:47 Check angles 15:00:47 SkyScan query 15:00:48 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 15:00:48 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 15:00:48 Check angles 15:00:48 SkyScan query 15:00:49 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:00:49 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:00:49 Check angles 15:00:49 SkyScan query 15:00:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:00:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:00:49 Message to Master queued w/err=0: serial=120184 error=0 15:00:54 Received message from Master: op=Filter serial=120185 15:00:54 Color wheel filter change from 0 to 0 15:00:54 FLIGetFilterPos err=0 currentPosition=0 15:00:54 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:54 Filter is already there-color wheel unchanged 15:00:55 Received message from Master: op=Shutter serial=120186 15:00:55 Shutter LASER close 15:00:55 Received message from Camera: op=State serial=120188 15:00:55 GetSingleValue result=40 Value=cccccccc 15:00:55 SkyScan query 15:00:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:00:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:55 Parameters OK 15:00:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:55 Set A/D data flow result=40 15:00:55 Set A/D channel type result=40 15:00:55 Set A/D encoding result=40 15:00:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:55 Set channel filter=0.000000e+000 result=40 15:00:55 Config A/D Result=40 15:00:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:55 Get A/D filter: -9.255963e+061 result=40 15:00:55 Get A/D value=-858993460 result=40 15:00:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:55 Parameters OK 15:00:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:55 Set A/D data flow result=40 15:00:55 Set A/D channel type result=40 15:00:55 Set A/D encoding result=40 15:00:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:55 Set channel filter=0.000000e+000 result=40 15:00:55 Config A/D Result=40 15:00:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:55 Get A/D filter: -9.255963e+061 result=40 15:00:55 Get A/D value=-858993460 result=40 15:00:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:55 Aux= 15:00:55 Message to Camera, serial 120188 queued 15:01:32 Received message from Master: op=PointingHead serial=120201 15:01:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:01:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:01:32 Point started: ret=0 15:01:32 point_skyscan result=0 15:01:33 Check angles 15:01:33 SkyScan query 15:01:34 SkyScan query done: ret=0 az=152.91<-10194 ze=8.52<-11432 Statuses=0009 0009 15:01:34 Msec=0 True Az=152.91 Ze=8.52 Az status=0009 Ze status=0009 15:01:34 Check angles 15:01:34 SkyScan query 15:01:34 SkyScan query done: ret=0 az=135<-9000 ze=-12.84<-12856 Statuses=0009 0009 15:01:34 Msec=750 True Az=135 Ze=-12.84 Az status=0009 Ze status=0009 15:01:35 Check angles 15:01:35 SkyScan query 15:01:35 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.825<-14255 Statuses=0009 0009 15:01:35 Msec=1500 True Az=117.54 Ze=-33.825 Az status=0009 Ze status=0009 15:01:35 Check angles 15:01:35 SkyScan query 15:01:36 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 15:01:36 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 15:01:36 Check angles 15:01:36 SkyScan query 15:01:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 15:01:37 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 15:01:37 Check angles 15:01:37 SkyScan query 15:01:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:01:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:01:38 Message to Master queued w/err=0: serial=120201 error=0 15:01:43 Received message from Master: op=Filter serial=120202 15:01:43 Color wheel filter change from 0 to 0 15:01:43 FLIGetFilterPos err=0 currentPosition=0 15:01:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:43 Filter is already there-color wheel unchanged 15:01:43 Received message from Master: op=Shutter serial=120203 15:01:43 Shutter LASER close 15:01:43 Received message from Camera: op=State serial=120205 15:01:43 GetSingleValue result=40 Value=cccccccc 15:01:43 SkyScan query 15:01:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:01:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:43 Parameters OK 15:01:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:43 Set A/D data flow result=40 15:01:43 Set A/D channel type result=40 15:01:43 Set A/D encoding result=40 15:01:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:43 Set channel filter=0.000000e+000 result=40 15:01:43 Config A/D Result=40 15:01:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:43 Get A/D filter: -9.255963e+061 result=40 15:01:43 Get A/D value=-858993460 result=40 15:01:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:43 Parameters OK 15:01:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:43 Set A/D data flow result=40 15:01:43 Set A/D channel type result=40 15:01:43 Set A/D encoding result=40 15:01:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:43 Set channel filter=0.000000e+000 result=40 15:01:43 Config A/D Result=40 15:01:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:43 Get A/D filter: -9.255963e+061 result=40 15:01:43 Get A/D value=-858993460 result=40 15:01:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:43 Aux= 15:01:43 Message to Camera, serial 120205 queued 15:02:20 Received message from Master: op=PointingHead serial=120218 15:02:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:02:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:02:20 Point started: ret=0 15:02:20 point_skyscan result=0 15:02:21 Check angles 15:02:21 SkyScan query 15:02:22 SkyScan query done: ret=0 az=108.75<-7250 ze=-81.045<-17403 Statuses=0009 0009 15:02:22 Msec=0 True Az=108.75 Ze=-81.045 Az status=0009 Ze status=0009 15:02:22 Check angles 15:02:22 SkyScan query 15:02:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 15:02:23 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 15:02:23 Check angles 15:02:23 SkyScan query 15:02:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.84<-20256 Statuses=0008 0009 15:02:23 Msec=1500 True Az=112.995 Ze=-123.84 Az status=0008 Ze status=0009 15:02:23 Check angles 15:02:23 SkyScan query 15:02:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 15:02:24 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 15:02:24 Check angles 15:02:24 SkyScan query 15:02:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 15:02:25 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 15:02:25 Check angles 15:02:25 SkyScan query 15:02:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:02:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:02:26 Message to Master queued w/err=0: serial=120218 error=0 15:02:31 Received message from Master: op=Filter serial=120219 15:02:31 Color wheel filter change from 0 to 0 15:02:31 FLIGetFilterPos err=0 currentPosition=0 15:02:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:31 Filter is already there-color wheel unchanged 15:02:31 Received message from Master: op=Shutter serial=120220 15:02:31 Shutter LASER open 15:02:31 Received message from Camera: op=State serial=120222 15:02:31 GetSingleValue result=40 Value=cccccccc 15:02:31 SkyScan query 15:02:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:02:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:32 Parameters OK 15:02:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:32 Set A/D data flow result=40 15:02:32 Set A/D channel type result=40 15:02:32 Set A/D encoding result=40 15:02:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:32 Set channel filter=0.000000e+000 result=40 15:02:32 Config A/D Result=40 15:02:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:32 Get A/D filter: -9.255963e+061 result=40 15:02:32 Get A/D value=-858993460 result=40 15:02:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:32 Parameters OK 15:02:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:32 Set A/D data flow result=40 15:02:32 Set A/D channel type result=40 15:02:32 Set A/D encoding result=40 15:02:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:32 Set channel filter=0.000000e+000 result=40 15:02:32 Config A/D Result=40 15:02:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:32 Get A/D filter: -9.255963e+061 result=40 15:02:32 Get A/D value=-858993460 result=40 15:02:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:32 Aux= 15:02:32 Message to Camera, serial 120222 queued 15:02:40 Received message from Master: op=Shutter serial=120232 15:02:40 Shutter LASER close 15:02:40 Received message from Master: op=PointingHead serial=120236 15:02:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:02:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:02:41 Point started: ret=0 15:02:41 point_skyscan result=0 15:02:41 Check angles 15:02:41 SkyScan query 15:02:42 SkyScan query done: ret=0 az=89.64<-5976 ze=157.035<-1531 Statuses=0009 0009 15:02:42 Msec=0 True Az=89.64 Ze=157.035 Az status=0009 Ze status=0009 15:02:42 Check angles 15:02:42 SkyScan query 15:02:43 SkyScan query done: ret=0 az=72.21<-4814 ze=136.035<-2931 Statuses=0009 0009 15:02:43 Msec=750 True Az=72.21 Ze=136.035 Az status=0009 Ze status=0009 15:02:43 Check angles 15:02:43 SkyScan query 15:02:44 SkyScan query done: ret=0 az=54.87<-3658 ze=115.125<-4325 Statuses=0009 0009 15:02:44 Msec=1500 True Az=54.87 Ze=115.125 Az status=0009 Ze status=0009 15:02:44 Check angles 15:02:44 SkyScan query 15:02:44 SkyScan query done: ret=0 az=40.95<-2730 ze=94.11<-5726 Statuses=0009 0009 15:02:44 Msec=2250 True Az=40.95 Ze=94.11 Az status=0009 Ze status=0009 15:02:44 Check angles 15:02:44 SkyScan query 15:02:45 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 15:02:45 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 15:02:45 Check angles 15:02:45 SkyScan query 15:02:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 15:02:46 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 15:02:46 Check angles 15:02:46 SkyScan query 15:02:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:02:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:02:47 Message to Master queued w/err=0: serial=120236 error=0 15:02:52 Received message from Master: op=Filter serial=120237 15:02:52 Color wheel filter change from 0 to 0 15:02:52 FLIGetFilterPos err=0 currentPosition=0 15:02:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:52 Filter is already there-color wheel unchanged 15:02:52 Received message from Master: op=Shutter serial=120238 15:02:52 Shutter LASER close 15:02:52 Received message from Camera: op=State serial=120240 15:02:52 GetSingleValue result=40 Value=cccccccc 15:02:52 SkyScan query 15:02:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:02:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:52 Parameters OK 15:02:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:52 Set A/D data flow result=40 15:02:52 Set A/D channel type result=40 15:02:52 Set A/D encoding result=40 15:02:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:52 Set channel filter=0.000000e+000 result=40 15:02:52 Config A/D Result=40 15:02:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:52 Get A/D filter: -9.255963e+061 result=40 15:02:52 Get A/D value=-858993460 result=40 15:02:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:52 Parameters OK 15:02:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:52 Set A/D data flow result=40 15:02:52 Set A/D channel type result=40 15:02:52 Set A/D encoding result=40 15:02:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:52 Set channel filter=0.000000e+000 result=40 15:02:52 Config A/D Result=40 15:02:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:52 Get A/D filter: -9.255963e+061 result=40 15:02:52 Get A/D value=-858993460 result=40 15:02:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:52 Aux= 15:02:52 Message to Camera, serial 120240 queued 15:03:29 Received message from Master: op=PointingHead serial=120253 15:03:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:03:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:03:30 Point started: ret=0 15:03:30 point_skyscan result=0 15:03:31 Check angles 15:03:31 SkyScan query 15:03:31 SkyScan query done: ret=0 az=64.41<-4294 ze=66.555<-7563 Statuses=0009 0008 15:03:31 Msec=0 True Az=64.41 Ze=66.555 Az status=0009 Ze status=0008 15:03:31 Check angles 15:03:31 SkyScan query 15:03:32 SkyScan query done: ret=0 az=81.855<-5457 ze=66.495<-7567 Statuses=0009 0008 15:03:32 Msec=750 True Az=81.855 Ze=66.495 Az status=0009 Ze status=0008 15:03:32 Check angles 15:03:32 SkyScan query 15:03:33 SkyScan query done: ret=0 az=99.855<-6657 ze=66.495<-7567 Statuses=0009 0008 15:03:33 Msec=1500 True Az=99.855 Ze=66.495 Az status=0009 Ze status=0008 15:03:33 Check angles 15:03:33 SkyScan query 15:03:33 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 15:03:33 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 15:03:34 Check angles 15:03:34 SkyScan query 15:03:34 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 15:03:34 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 15:03:34 Check angles 15:03:34 SkyScan query 15:03:35 SkyScan query done: ret=0 az=152.4<-10160 ze=66.495<-7567 Statuses=0009 0008 15:03:35 Msec=3750 True Az=152.4 Ze=66.495 Az status=0009 Ze status=0008 15:03:35 Check angles 15:03:35 SkyScan query 15:03:36 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:03:36 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:03:36 Message to Master queued w/err=0: serial=120253 error=0 15:03:41 Received message from Master: op=Filter serial=120254 15:03:41 Color wheel filter change from 0 to 0 15:03:41 FLIGetFilterPos err=0 currentPosition=0 15:03:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:41 Filter is already there-color wheel unchanged 15:03:41 Received message from Master: op=Shutter serial=120255 15:03:41 Shutter LASER close 15:03:41 Received message from Camera: op=State serial=120257 15:03:41 GetSingleValue result=40 Value=cccccccc 15:03:41 SkyScan query 15:03:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:03:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:41 Parameters OK 15:03:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:41 Set A/D data flow result=40 15:03:41 Set A/D channel type result=40 15:03:41 Set A/D encoding result=40 15:03:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:41 Set channel filter=0.000000e+000 result=40 15:03:41 Config A/D Result=40 15:03:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:41 Get A/D filter: -9.255963e+061 result=40 15:03:41 Get A/D value=-858993460 result=40 15:03:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:41 Parameters OK 15:03:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:41 Set A/D data flow result=40 15:03:41 Set A/D channel type result=40 15:03:41 Set A/D encoding result=40 15:03:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:41 Set channel filter=0.000000e+000 result=40 15:03:41 Config A/D Result=40 15:03:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:41 Get A/D filter: -9.255963e+061 result=40 15:03:41 Get A/D value=-858993460 result=40 15:03:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:41 Aux= 15:03:41 Message to Camera, serial 120257 queued 15:04:18 Received message from Master: op=PointingHead serial=120270 15:04:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:04:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:04:19 Point started: ret=0 15:04:19 point_skyscan result=0 15:04:19 Check angles 15:04:19 SkyScan query 15:04:20 SkyScan query done: ret=0 az=134.82<-8988 ze=36.6<-9560 Statuses=0009 0009 15:04:20 Msec=0 True Az=134.82 Ze=36.6 Az status=0009 Ze status=0009 15:04:20 Check angles 15:04:20 SkyScan query 15:04:21 SkyScan query done: ret=0 az=117.285<-7819 ze=15.69<-10954 Statuses=0009 0009 15:04:21 Msec=750 True Az=117.285 Ze=15.69 Az status=0009 Ze status=0009 15:04:21 Check angles 15:04:21 SkyScan query 15:04:21 SkyScan query done: ret=0 az=99.615<-6641 ze=-5.715<-12381 Statuses=0009 0009 15:04:21 Msec=1500 True Az=99.615 Ze=-5.715 Az status=0009 Ze status=0009 15:04:22 Check angles 15:04:22 SkyScan query 15:04:22 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.7<-13780 Statuses=0009 0009 15:04:22 Msec=2250 True Az=82.185 Ze=-26.7 Az status=0009 Ze status=0009 15:04:22 Check angles 15:04:22 SkyScan query 15:04:23 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.565<-14571 Statuses=0009 0008 15:04:23 Msec=3000 True Az=64.65 Ze=-38.565 Az status=0009 Ze status=0008 15:04:23 Check angles 15:04:23 SkyScan query 15:04:24 SkyScan query done: ret=0 az=46.785<-3119 ze=-38.535<-14569 Statuses=0009 0008 15:04:24 Msec=3750 True Az=46.785 Ze=-38.535 Az status=0009 Ze status=0008 15:04:24 Check angles 15:04:24 SkyScan query 15:04:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:04:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:04:24 Message to Master queued w/err=0: serial=120270 error=0 15:04:29 Received message from Master: op=Filter serial=120271 15:04:29 Color wheel filter change from 0 to 0 15:04:29 FLIGetFilterPos err=0 currentPosition=0 15:04:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:29 Filter is already there-color wheel unchanged 15:04:30 Received message from Master: op=Shutter serial=120272 15:04:30 Shutter LASER close 15:04:30 Received message from Camera: op=State serial=120274 15:04:30 GetSingleValue result=40 Value=cccccccc 15:04:30 SkyScan query 15:04:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:04:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:30 Parameters OK 15:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:30 Set A/D data flow result=40 15:04:30 Set A/D channel type result=40 15:04:30 Set A/D encoding result=40 15:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:30 Set channel filter=0.000000e+000 result=40 15:04:30 Config A/D Result=40 15:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:30 Get A/D filter: -9.255963e+061 result=40 15:04:30 Get A/D value=-858993460 result=40 15:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:30 Parameters OK 15:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:30 Set A/D data flow result=40 15:04:30 Set A/D channel type result=40 15:04:30 Set A/D encoding result=40 15:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:30 Set channel filter=0.000000e+000 result=40 15:04:30 Config A/D Result=40 15:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:30 Get A/D filter: -9.255963e+061 result=40 15:04:30 Get A/D value=-858993460 result=40 15:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:30 Aux= 15:04:30 Message to Camera, serial 120274 queued 15:05:07 Received message from Master: op=PointingHead serial=120287 15:05:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:05:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:05:07 Point started: ret=0 15:05:07 point_skyscan result=0 15:05:08 Check angles 15:05:08 SkyScan query 15:05:09 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.745<-16583 Statuses=0009 0009 15:05:09 Msec=0 True Az=64.425 Ze=-68.745 Az status=0009 Ze status=0009 15:05:09 Check angles 15:05:09 SkyScan query 15:05:10 SkyScan query done: ret=0 az=82.29<-5486 ze=-90.135<-18009 Statuses=0009 0009 15:05:10 Msec=750 True Az=82.29 Ze=-90.135 Az status=0009 Ze status=0009 15:05:10 Check angles 15:05:10 SkyScan query 15:05:10 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.105<-19407 Statuses=0009 0009 15:05:10 Msec=1500 True Az=99.705 Ze=-111.105 Az status=0009 Ze status=0009 15:05:10 Check angles 15:05:10 SkyScan query 15:05:11 SkyScan query done: ret=0 az=117.315<-7821 ze=-132.03<-20802 Statuses=0009 0009 15:05:11 Msec=2250 True Az=117.315 Ze=-132.03 Az status=0009 Ze status=0009 15:05:11 Check angles 15:05:11 SkyScan query 15:05:12 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 15:05:12 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 15:05:12 Check angles 15:05:12 SkyScan query 15:05:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:05:13 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:05:13 Message to Master queued w/err=0: serial=120287 error=0 15:05:18 Received message from Master: op=Filter serial=120288 15:05:18 Color wheel filter change from 0 to 0 15:05:18 FLIGetFilterPos err=0 currentPosition=0 15:05:18 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:18 Filter is already there-color wheel unchanged 15:05:18 Received message from Master: op=Shutter serial=120289 15:05:18 Shutter LASER close 15:05:18 Received message from Camera: op=State serial=120291 15:05:18 GetSingleValue result=40 Value=cccccccc 15:05:18 SkyScan query 15:05:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:05:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:18 Parameters OK 15:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:18 Set A/D data flow result=40 15:05:18 Set A/D channel type result=40 15:05:18 Set A/D encoding result=40 15:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:18 Set channel filter=0.000000e+000 result=40 15:05:18 Config A/D Result=40 15:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:18 Get A/D filter: -9.255963e+061 result=40 15:05:18 Get A/D value=-858993460 result=40 15:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:18 Parameters OK 15:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:18 Set A/D data flow result=40 15:05:18 Set A/D channel type result=40 15:05:18 Set A/D encoding result=40 15:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:18 Set channel filter=0.000000e+000 result=40 15:05:18 Config A/D Result=40 15:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:18 Get A/D filter: -9.255963e+061 result=40 15:05:18 Get A/D value=-858993460 result=40 15:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:18 Aux= 15:05:18 Message to Camera, serial 120291 queued 15:05:55 Received message from Master: op=PointingHead serial=120304 15:05:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:05:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:05:56 Point started: ret=0 15:05:56 point_skyscan result=0 15:05:56 Check angles 15:05:56 SkyScan query 15:05:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 15:05:57 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 15:05:57 Check angles 15:05:57 SkyScan query 15:05:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:05:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:05:58 Message to Master queued w/err=0: serial=120304 error=0 15:06:03 Received message from Master: op=Filter serial=120305 15:06:03 Color wheel filter change from 0 to 0 15:06:03 FLIGetFilterPos err=0 currentPosition=0 15:06:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:03 Filter is already there-color wheel unchanged 15:06:03 Received message from Master: op=Shutter serial=120306 15:06:03 Shutter LASER open 15:06:03 Received message from Camera: op=State serial=120308 15:06:03 GetSingleValue result=40 Value=cccccccc 15:06:03 SkyScan query 15:06:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:06:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:04 Parameters OK 15:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:04 Set A/D data flow result=40 15:06:04 Set A/D channel type result=40 15:06:04 Set A/D encoding result=40 15:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:04 Set channel filter=0.000000e+000 result=40 15:06:04 Config A/D Result=40 15:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:04 Get A/D filter: -9.255963e+061 result=40 15:06:04 Get A/D value=-858993460 result=40 15:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:04 Parameters OK 15:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:04 Set A/D data flow result=40 15:06:04 Set A/D channel type result=40 15:06:04 Set A/D encoding result=40 15:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:04 Set channel filter=0.000000e+000 result=40 15:06:04 Config A/D Result=40 15:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:04 Get A/D filter: -9.255963e+061 result=40 15:06:04 Get A/D value=-858993460 result=40 15:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:04 Aux= 15:06:04 Message to Camera, serial 120308 queued 15:06:12 Received message from Master: op=Shutter serial=120318 15:06:12 Shutter LASER close 15:06:13 Received message from Master: op=PointingHead serial=120322 15:06:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:06:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:06:13 Point started: ret=0 15:06:13 point_skyscan result=0 15:06:14 Check angles 15:06:14 SkyScan query 15:06:14 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.385<-21559 Statuses=0009 0009 15:06:14 Msec=0 True Az=135.78 Ze=-143.385 Az status=0009 Ze status=0009 15:06:14 Check angles 15:06:14 SkyScan query [UTC 2018-12-13 15:06:15] 15:06:15 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.965<-20131 Statuses=0009 0009 15:06:15 Msec=750 True Az=153.72 Ze=-121.965 Az status=0009 Ze status=0009 15:06:15 Check angles 15:06:15 SkyScan query 15:06:16 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.085<-18739 Statuses=0009 0009 15:06:16 Msec=1500 True Az=171.18 Ze=-101.085 Az status=0009 Ze status=0009 15:06:16 Check angles 15:06:16 SkyScan query 15:06:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.115<-17341 Statuses=0008 0009 15:06:17 Msec=2250 True Az=176.01 Ze=-80.115 Az status=0008 Ze status=0009 15:06:17 Check angles 15:06:17 SkyScan query 15:06:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.13<-15942 Statuses=0008 0009 15:06:17 Msec=3000 True Az=176.01 Ze=-59.13 Az status=0008 Ze status=0009 15:06:17 Check angles 15:06:17 SkyScan query 15:06:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:06:18 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:06:18 Message to Master queued w/err=0: serial=120322 error=0 15:06:23 Received message from Master: op=Filter serial=120323 15:06:23 Color wheel filter change from 0 to 0 15:06:23 FLIGetFilterPos err=0 currentPosition=0 15:06:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:23 Filter is already there-color wheel unchanged 15:06:23 Received message from Master: op=Shutter serial=120324 15:06:23 Shutter LASER close 15:06:23 Received message from Camera: op=State serial=120326 15:06:23 GetSingleValue result=40 Value=cccccccc 15:06:23 SkyScan query 15:06:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:06:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:24 Parameters OK 15:06:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:24 Set A/D data flow result=40 15:06:24 Set A/D channel type result=40 15:06:24 Set A/D encoding result=40 15:06:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:24 Set channel filter=0.000000e+000 result=40 15:06:24 Config A/D Result=40 15:06:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:24 Get A/D filter: -9.255963e+061 result=40 15:06:24 Get A/D value=-858993460 result=40 15:06:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:24 Parameters OK 15:06:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:24 Set A/D data flow result=40 15:06:24 Set A/D channel type result=40 15:06:24 Set A/D encoding result=40 15:06:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:24 Set channel filter=0.000000e+000 result=40 15:06:24 Config A/D Result=40 15:06:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:24 Get A/D filter: -9.255963e+061 result=40 15:06:24 Get A/D value=-858993460 result=40 15:06:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:24 Aux= 15:06:24 Message to Camera, serial 120326 queued 15:07:01 Received message from Master: op=PointingHead serial=120339 15:07:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:07:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:07:01 Point started: ret=0 15:07:01 point_skyscan result=0 15:07:02 Check angles 15:07:02 SkyScan query 15:07:02 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.24<-13416 Statuses=0009 0009 15:07:02 Msec=0 True Az=152.7 Ze=-21.24 Az status=0009 Ze status=0009 15:07:03 Check angles 15:07:03 SkyScan query 15:07:03 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.285<-12019 Statuses=0009 0009 15:07:03 Msec=750 True Az=135.105 Ze=-0.285 Az status=0009 Ze status=0009 15:07:03 Check angles 15:07:03 SkyScan query 15:07:04 SkyScan query done: ret=0 az=117.33<-7822 ze=21.12<-10592 Statuses=0009 0009 15:07:04 Msec=1500 True Az=117.33 Ze=21.12 Az status=0009 Ze status=0009 15:07:04 Check angles 15:07:04 SkyScan query 15:07:05 SkyScan query done: ret=0 az=99.855<-6657 ze=42.045<-9197 Statuses=0009 0009 15:07:05 Msec=2250 True Az=99.855 Ze=42.045 Az status=0009 Ze status=0009 15:07:05 Check angles 15:07:05 SkyScan query 15:07:05 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 15:07:05 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 15:07:06 Check angles 15:07:06 SkyScan query 15:07:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:07:06 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:07:06 Message to Master queued w/err=0: serial=120339 error=0 15:07:11 Received message from Master: op=Filter serial=120340 15:07:11 Color wheel filter change from 0 to 0 15:07:11 FLIGetFilterPos err=0 currentPosition=0 15:07:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:11 Filter is already there-color wheel unchanged 15:07:11 Received message from Master: op=Shutter serial=120341 15:07:11 Shutter LASER close 15:07:11 Received message from Camera: op=State serial=120343 15:07:11 GetSingleValue result=40 Value=cccccccc 15:07:11 SkyScan query 15:07:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:07:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:12 Parameters OK 15:07:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:12 Set A/D data flow result=40 15:07:12 Set A/D channel type result=40 15:07:12 Set A/D encoding result=40 15:07:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:12 Set channel filter=0.000000e+000 result=40 15:07:12 Config A/D Result=40 15:07:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:12 Get A/D filter: -9.255963e+061 result=40 15:07:12 Get A/D value=-858993460 result=40 15:07:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:12 Parameters OK 15:07:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:12 Set A/D data flow result=40 15:07:12 Set A/D channel type result=40 15:07:12 Set A/D encoding result=40 15:07:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:12 Set channel filter=0.000000e+000 result=40 15:07:12 Config A/D Result=40 15:07:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:12 Get A/D filter: -9.255963e+061 result=40 15:07:12 Get A/D value=-858993460 result=40 15:07:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:12 Aux= 15:07:12 Message to Camera, serial 120343 queued 15:07:49 Received message from Master: op=PointingHead serial=120356 15:07:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:07:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:07:49 Point started: ret=0 15:07:49 point_skyscan result=0 15:07:50 Check angles 15:07:50 SkyScan query 15:07:50 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 15:07:50 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 15:07:51 Check angles 15:07:51 SkyScan query 15:07:51 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 15:07:51 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 15:07:51 Check angles 15:07:51 SkyScan query 15:07:52 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 15:07:52 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 15:07:52 Check angles 15:07:52 SkyScan query 15:07:53 SkyScan query done: ret=0 az=161.655<-10777 ze=38.505<-9433 Statuses=0009 0008 15:07:53 Msec=2250 True Az=161.655 Ze=38.505 Az status=0009 Ze status=0008 15:07:53 Check angles 15:07:53 SkyScan query 15:07:54 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:07:54 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:07:54 Check angles 15:07:54 SkyScan query 15:07:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:07:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:07:54 Message to Master queued w/err=0: serial=120356 error=0 15:07:59 Received message from Master: op=Filter serial=120357 15:07:59 Color wheel filter change from 0 to 0 15:07:59 FLIGetFilterPos err=0 currentPosition=0 15:07:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:59 Filter is already there-color wheel unchanged 15:07:59 Received message from Master: op=Shutter serial=120358 15:07:59 Shutter LASER close 15:07:59 Received message from Camera: op=State serial=120360 15:07:59 GetSingleValue result=40 Value=cccccccc 15:07:59 SkyScan query 15:08:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:08:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:00 Parameters OK 15:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:00 Set A/D data flow result=40 15:08:00 Set A/D channel type result=40 15:08:00 Set A/D encoding result=40 15:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:00 Set channel filter=0.000000e+000 result=40 15:08:00 Config A/D Result=40 15:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:00 Get A/D filter: -9.255963e+061 result=40 15:08:00 Get A/D value=-858993460 result=40 15:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:00 Parameters OK 15:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:00 Set A/D data flow result=40 15:08:00 Set A/D channel type result=40 15:08:00 Set A/D encoding result=40 15:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:00 Set channel filter=0.000000e+000 result=40 15:08:00 Config A/D Result=40 15:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:00 Get A/D filter: -9.255963e+061 result=40 15:08:00 Get A/D value=-858993460 result=40 15:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:00 Aux= 15:08:00 Message to Camera, serial 120360 queued 15:08:36 Received message from Master: op=PointingHead serial=120372 15:08:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:08:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:08:36 Point started: ret=0 15:08:36 point_skyscan result=0 15:08:37 Check angles 15:08:37 SkyScan query 15:08:38 SkyScan query done: ret=0 az=152.775<-10185 ze=8.52<-11432 Statuses=0009 0009 15:08:38 Msec=0 True Az=152.775 Ze=8.52 Az status=0009 Ze status=0009 15:08:38 Check angles 15:08:38 SkyScan query 15:08:38 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.405<-12827 Statuses=0009 0009 15:08:38 Msec=750 True Az=135.435 Ze=-12.405 Az status=0009 Ze status=0009 15:08:39 Check angles 15:08:39 SkyScan query 15:08:39 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.36<-14224 Statuses=0009 0009 15:08:39 Msec=1500 True Az=117.825 Ze=-33.36 Az status=0009 Ze status=0009 15:08:39 Check angles 15:08:39 SkyScan query 15:08:40 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 15:08:40 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 15:08:40 Check angles 15:08:40 SkyScan query 15:08:41 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:08:41 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:08:41 Check angles 15:08:41 SkyScan query 15:08:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:08:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:08:41 Message to Master queued w/err=0: serial=120372 error=0 15:08:46 Received message from Master: op=Filter serial=120373 15:08:46 Color wheel filter change from 0 to 0 15:08:46 FLIGetFilterPos err=0 currentPosition=0 15:08:46 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:46 Filter is already there-color wheel unchanged 15:08:47 Received message from Master: op=Shutter serial=120374 15:08:47 Shutter LASER close 15:08:47 Received message from Camera: op=State serial=120376 15:08:47 GetSingleValue result=40 Value=cccccccc 15:08:47 SkyScan query 15:08:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:08:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:47 Parameters OK 15:08:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:47 Set A/D data flow result=40 15:08:47 Set A/D channel type result=40 15:08:47 Set A/D encoding result=40 15:08:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:47 Set channel filter=0.000000e+000 result=40 15:08:47 Config A/D Result=40 15:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:47 Get A/D filter: -9.255963e+061 result=40 15:08:47 Get A/D value=-858993460 result=40 15:08:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:47 Parameters OK 15:08:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:47 Set A/D data flow result=40 15:08:47 Set A/D channel type result=40 15:08:47 Set A/D encoding result=40 15:08:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:47 Set channel filter=0.000000e+000 result=40 15:08:47 Config A/D Result=40 15:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:47 Get A/D filter: -9.255963e+061 result=40 15:08:47 Get A/D value=-858993460 result=40 15:08:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:47 Aux= 15:08:47 Message to Camera, serial 120376 queued 15:09:23 Received message from Master: op=PointingHead serial=120388 15:09:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:09:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:09:23 Point started: ret=0 15:09:23 point_skyscan result=0 15:09:24 Check angles 15:09:24 SkyScan query 15:09:25 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.03<-17402 Statuses=0009 0009 15:09:25 Msec=0 True Az=108.825 Ze=-81.03 Az status=0009 Ze status=0009 15:09:25 Check angles 15:09:25 SkyScan query 15:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 15:09:25 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 15:09:26 Check angles 15:09:26 SkyScan query 15:09:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.94<-20196 Statuses=0008 0009 15:09:26 Msec=1500 True Az=112.995 Ze=-122.94 Az status=0008 Ze status=0009 15:09:26 Check angles 15:09:26 SkyScan query 15:09:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 15:09:27 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 15:09:27 Check angles 15:09:27 SkyScan query 15:09:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 15:09:28 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 15:09:28 Check angles 15:09:28 SkyScan query 15:09:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:09:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:09:28 Message to Master queued w/err=0: serial=120388 error=0 15:09:33 Received message from Master: op=Filter serial=120389 15:09:33 Color wheel filter change from 0 to 0 15:09:33 FLIGetFilterPos err=0 currentPosition=0 15:09:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:33 Filter is already there-color wheel unchanged 15:09:34 Received message from Master: op=Shutter serial=120390 15:09:34 Shutter LASER open 15:09:34 Received message from Camera: op=State serial=120392 15:09:34 GetSingleValue result=40 Value=cccccccc 15:09:34 SkyScan query 15:09:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:09:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:34 Parameters OK 15:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:34 Set A/D data flow result=40 15:09:34 Set A/D channel type result=40 15:09:34 Set A/D encoding result=40 15:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:34 Set channel filter=0.000000e+000 result=40 15:09:34 Config A/D Result=40 15:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:34 Get A/D filter: -9.255963e+061 result=40 15:09:34 Get A/D value=-858993460 result=40 15:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:34 Parameters OK 15:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:34 Set A/D data flow result=40 15:09:34 Set A/D channel type result=40 15:09:34 Set A/D encoding result=40 15:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:34 Set channel filter=0.000000e+000 result=40 15:09:34 Config A/D Result=40 15:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:34 Get A/D filter: -9.255963e+061 result=40 15:09:34 Get A/D value=-858993460 result=40 15:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:34 Aux= 15:09:34 Message to Camera, serial 120392 queued 15:09:43 Received message from Master: op=Shutter serial=120402 15:09:43 Shutter LASER close 15:09:43 Received message from Master: op=PointingHead serial=120406 15:09:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:09:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:09:44 Point started: ret=0 15:09:44 point_skyscan result=0 15:09:44 Check angles 15:09:44 SkyScan query 15:09:45 SkyScan query done: ret=0 az=89.85<-5990 ze=157.14<-1524 Statuses=0009 0009 15:09:45 Msec=0 True Az=89.85 Ze=157.14 Az status=0009 Ze status=0009 15:09:45 Check angles 15:09:45 SkyScan query 15:09:46 SkyScan query done: ret=0 az=72<-4800 ze=135.75<-2950 Statuses=0009 0009 15:09:46 Msec=750 True Az=72 Ze=135.75 Az status=0009 Ze status=0009 15:09:46 Check angles 15:09:46 SkyScan query 15:09:46 SkyScan query done: ret=0 az=54.69<-3646 ze=114.78<-4348 Statuses=0009 0009 15:09:46 Msec=1500 True Az=54.69 Ze=114.78 Az status=0009 Ze status=0009 15:09:47 Check angles 15:09:47 SkyScan query 15:09:47 SkyScan query done: ret=0 az=40.935<-2729 ze=93.825<-5745 Statuses=0009 0009 15:09:47 Msec=2250 True Az=40.935 Ze=93.825 Az status=0009 Ze status=0009 15:09:47 Check angles 15:09:47 SkyScan query 15:09:48 SkyScan query done: ret=0 az=40.995<-2733 ze=72.435<-7171 Statuses=0008 0009 15:09:48 Msec=3000 True Az=40.995 Ze=72.435 Az status=0008 Ze status=0009 15:09:48 Check angles 15:09:48 SkyScan query 15:09:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 15:09:49 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 15:09:49 Check angles 15:09:49 SkyScan query 15:09:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:09:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:09:50 Message to Master queued w/err=0: serial=120406 error=0 15:09:55 Received message from Master: op=Filter serial=120407 15:09:55 Color wheel filter change from 0 to 0 15:09:55 FLIGetFilterPos err=0 currentPosition=0 15:09:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:55 Filter is already there-color wheel unchanged 15:09:55 Received message from Master: op=Shutter serial=120408 15:09:55 Shutter LASER close 15:09:55 Received message from Camera: op=State serial=120410 15:09:55 GetSingleValue result=40 Value=cccccccc 15:09:55 SkyScan query 15:09:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:09:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:55 Parameters OK 15:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:55 Set A/D data flow result=40 15:09:55 Set A/D channel type result=40 15:09:55 Set A/D encoding result=40 15:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:55 Set channel filter=0.000000e+000 result=40 15:09:55 Config A/D Result=40 15:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:55 Get A/D filter: -9.255963e+061 result=40 15:09:55 Get A/D value=-858993460 result=40 15:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:55 Parameters OK 15:09:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:55 Set A/D data flow result=40 15:09:55 Set A/D channel type result=40 15:09:55 Set A/D encoding result=40 15:09:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:55 Set channel filter=0.000000e+000 result=40 15:09:55 Config A/D Result=40 15:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:55 Get A/D filter: -9.255963e+061 result=40 15:09:55 Get A/D value=-858993460 result=40 15:09:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:55 Aux= 15:09:55 Message to Camera, serial 120410 queued 15:10:32 Received message from Master: op=PointingHead serial=120423 15:10:32 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:10:32 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:10:33 Point started: ret=0 15:10:33 point_skyscan result=0 15:10:33 Check angles 15:10:33 SkyScan query 15:10:34 SkyScan query done: ret=0 az=64.23<-4282 ze=66.54<-7564 Statuses=0009 0008 15:10:34 Msec=0 True Az=64.23 Ze=66.54 Az status=0009 Ze status=0008 15:10:34 Check angles 15:10:34 SkyScan query 15:10:35 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 15:10:35 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 15:10:35 Check angles 15:10:35 SkyScan query 15:10:35 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 15:10:35 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 15:10:36 Check angles 15:10:36 SkyScan query 15:10:36 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 15:10:36 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 15:10:36 Check angles 15:10:36 SkyScan query 15:10:37 SkyScan query done: ret=0 az=134.13<-8942 ze=66.495<-7567 Statuses=0009 0008 15:10:37 Msec=3000 True Az=134.13 Ze=66.495 Az status=0009 Ze status=0008 15:10:37 Check angles 15:10:37 SkyScan query 15:10:38 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 15:10:38 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 15:10:38 Check angles 15:10:38 SkyScan query 15:10:38 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:10:38 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:10:38 Message to Master queued w/err=0: serial=120423 error=0 15:10:43 Received message from Master: op=Filter serial=120424 15:10:43 Color wheel filter change from 0 to 0 15:10:43 FLIGetFilterPos err=0 currentPosition=0 15:10:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:43 Filter is already there-color wheel unchanged 15:10:44 Received message from Master: op=Shutter serial=120425 15:10:44 Shutter LASER close 15:10:44 Received message from Camera: op=State serial=120427 15:10:44 GetSingleValue result=40 Value=cccccccc 15:10:44 SkyScan query 15:10:44 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:10:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:44 Parameters OK 15:10:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:44 Set A/D data flow result=40 15:10:44 Set A/D channel type result=40 15:10:44 Set A/D encoding result=40 15:10:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:44 Set channel filter=0.000000e+000 result=40 15:10:44 Config A/D Result=40 15:10:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:44 Get A/D filter: -9.255963e+061 result=40 15:10:44 Get A/D value=-858993460 result=40 15:10:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:44 Parameters OK 15:10:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:44 Set A/D data flow result=40 15:10:44 Set A/D channel type result=40 15:10:44 Set A/D encoding result=40 15:10:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:44 Set channel filter=0.000000e+000 result=40 15:10:44 Config A/D Result=40 15:10:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:44 Get A/D filter: -9.255963e+061 result=40 15:10:44 Get A/D value=-858993460 result=40 15:10:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:44 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:44 Aux= 15:10:44 Message to Camera, serial 120427 queued 15:11:21 Received message from Master: op=PointingHead serial=120440 15:11:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:11:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:11:21 Point started: ret=0 15:11:21 point_skyscan result=0 15:11:22 Check angles 15:11:22 SkyScan query 15:11:23 SkyScan query done: ret=0 az=134.985<-8999 ze=36.72<-9552 Statuses=0009 0009 15:11:23 Msec=0 True Az=134.985 Ze=36.72 Az status=0009 Ze status=0009 15:11:23 Check angles 15:11:23 SkyScan query 15:11:23 SkyScan query done: ret=0 az=117.555<-7837 ze=15.765<-10949 Statuses=0009 0009 15:11:23 Msec=750 True Az=117.555 Ze=15.765 Az status=0009 Ze status=0009 15:11:24 Check angles 15:11:24 SkyScan query 15:11:24 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.61<-12374 Statuses=0009 0009 15:11:24 Msec=1500 True Az=99.825 Ze=-5.61 Az status=0009 Ze status=0009 15:11:24 Check angles 15:11:24 SkyScan query 15:11:25 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.565<-13771 Statuses=0009 0009 15:11:25 Msec=2250 True Az=82.275 Ze=-26.565 Az status=0009 Ze status=0009 15:11:25 Check angles 15:11:25 SkyScan query 15:11:26 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.565<-14571 Statuses=0009 0008 15:11:26 Msec=3000 True Az=64.725 Ze=-38.565 Az status=0009 Ze status=0008 15:11:26 Check angles 15:11:26 SkyScan query 15:11:27 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.535<-14569 Statuses=0009 0008 15:11:27 Msec=3750 True Az=47.31 Ze=-38.535 Az status=0009 Ze status=0008 15:11:27 Check angles 15:11:27 SkyScan query 15:11:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:11:27 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:11:27 Message to Master queued w/err=0: serial=120440 error=0 15:11:32 Received message from Master: op=Filter serial=120441 15:11:32 Color wheel filter change from 0 to 0 15:11:32 FLIGetFilterPos err=0 currentPosition=0 15:11:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:32 Filter is already there-color wheel unchanged 15:11:32 Received message from Master: op=Shutter serial=120442 15:11:32 Shutter LASER close 15:11:32 Received message from Camera: op=State serial=120444 15:11:32 GetSingleValue result=40 Value=cccccccc 15:11:32 SkyScan query 15:11:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:11:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:33 Parameters OK 15:11:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:33 Set A/D data flow result=40 15:11:33 Set A/D channel type result=40 15:11:33 Set A/D encoding result=40 15:11:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:33 Set channel filter=0.000000e+000 result=40 15:11:33 Config A/D Result=40 15:11:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:33 Get A/D filter: -9.255963e+061 result=40 15:11:33 Get A/D value=-858993460 result=40 15:11:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:33 Parameters OK 15:11:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:33 Set A/D data flow result=40 15:11:33 Set A/D channel type result=40 15:11:33 Set A/D encoding result=40 15:11:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:33 Set channel filter=0.000000e+000 result=40 15:11:33 Config A/D Result=40 15:11:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:33 Get A/D filter: -9.255963e+061 result=40 15:11:33 Get A/D value=-858993460 result=40 15:11:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:33 Aux= 15:11:33 Message to Camera, serial 120444 queued 15:12:10 Received message from Master: op=PointingHead serial=120457 15:12:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:12:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:12:10 Point started: ret=0 15:12:10 point_skyscan result=0 15:12:11 Check angles 15:12:11 SkyScan query 15:12:12 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.025<-16535 Statuses=0009 0009 15:12:12 Msec=0 True Az=63.84 Ze=-68.025 Az status=0009 Ze status=0009 15:12:12 Check angles 15:12:12 SkyScan query 15:12:12 SkyScan query done: ret=0 az=81.195<-5413 ze=-88.98<-17932 Statuses=0009 0009 15:12:12 Msec=750 True Az=81.195 Ze=-88.98 Az status=0009 Ze status=0009 15:12:12 Check angles 15:12:12 SkyScan query 15:12:13 SkyScan query done: ret=0 az=98.64<-6576 ze=-109.905<-19327 Statuses=0009 0009 15:12:13 Msec=1500 True Az=98.64 Ze=-109.905 Az status=0009 Ze status=0009 15:12:13 Check angles 15:12:13 SkyScan query 15:12:14 SkyScan query done: ret=0 az=116.145<-7743 ze=-130.905<-20727 Statuses=0009 0009 15:12:14 Msec=2250 True Az=116.145 Ze=-130.905 Az status=0009 Ze status=0009 15:12:14 Check angles 15:12:14 SkyScan query 15:12:15 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.555<-21437 Statuses=0009 0008 15:12:15 Msec=3000 True Az=131.085 Ze=-141.555 Az status=0009 Ze status=0008 15:12:15 Check angles 15:12:15 SkyScan query 15:12:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 15:12:15 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 15:12:15 Message to Master queued w/err=0: serial=120457 error=0 15:12:20 Received message from Master: op=Filter serial=120458 15:12:20 Color wheel filter change from 0 to 0 15:12:20 FLIGetFilterPos err=0 currentPosition=0 15:12:20 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:20 Filter is already there-color wheel unchanged 15:12:20 Received message from Master: op=Shutter serial=120459 15:12:20 Shutter LASER close 15:12:21 Received message from Camera: op=State serial=120461 15:12:21 GetSingleValue result=40 Value=cccccccc 15:12:21 SkyScan query 15:12:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:12:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:21 Parameters OK 15:12:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:21 Set A/D data flow result=40 15:12:21 Set A/D channel type result=40 15:12:21 Set A/D encoding result=40 15:12:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:21 Set channel filter=0.000000e+000 result=40 15:12:21 Config A/D Result=40 15:12:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:21 Get A/D filter: -9.255963e+061 result=40 15:12:21 Get A/D value=-858993460 result=40 15:12:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:21 Parameters OK 15:12:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:21 Set A/D data flow result=40 15:12:21 Set A/D channel type result=40 15:12:21 Set A/D encoding result=40 15:12:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:21 Set channel filter=0.000000e+000 result=40 15:12:21 Config A/D Result=40 15:12:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:21 Get A/D filter: -9.255963e+061 result=40 15:12:21 Get A/D value=-858993460 result=40 15:12:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:21 Aux= 15:12:21 Message to Camera, serial 120461 queued 15:12:58 Received message from Master: op=PointingHead serial=120474 15:12:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:12:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:12:58 Point started: ret=0 15:12:58 point_skyscan result=0 15:12:59 Check angles 15:12:59 SkyScan query 15:13:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 15:13:00 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 15:13:00 Check angles 15:13:00 SkyScan query 15:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:13:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:13:00 Message to Master queued w/err=0: serial=120474 error=0 15:13:05 Received message from Master: op=Filter serial=120475 15:13:05 Color wheel filter change from 0 to 0 15:13:05 FLIGetFilterPos err=0 currentPosition=0 15:13:05 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:05 Filter is already there-color wheel unchanged 15:13:06 Received message from Master: op=Shutter serial=120476 15:13:06 Shutter LASER open 15:13:06 Received message from Camera: op=State serial=120478 15:13:06 GetSingleValue result=40 Value=cccccccc 15:13:06 SkyScan query 15:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:13:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:06 Parameters OK 15:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:06 Set A/D data flow result=40 15:13:06 Set A/D channel type result=40 15:13:06 Set A/D encoding result=40 15:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:06 Set channel filter=0.000000e+000 result=40 15:13:06 Config A/D Result=40 15:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:06 Get A/D filter: -9.255963e+061 result=40 15:13:06 Get A/D value=-858993460 result=40 15:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:06 Parameters OK 15:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:06 Set A/D data flow result=40 15:13:06 Set A/D channel type result=40 15:13:06 Set A/D encoding result=40 15:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:06 Set channel filter=0.000000e+000 result=40 15:13:06 Config A/D Result=40 15:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:06 Get A/D filter: -9.255963e+061 result=40 15:13:06 Get A/D value=-858993460 result=40 15:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:06 Aux= 15:13:06 Message to Camera, serial 120478 queued 15:13:14 Received message from Master: op=Shutter serial=120487 15:13:14 Shutter LASER close 15:13:14 Received message from Master: op=PointingHead serial=120491 15:13:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:13:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:13:15 Point started: ret=0 15:13:15 point_skyscan result=0 15:13:15 Check angles 15:13:15 SkyScan query 15:13:16 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.355<-21557 Statuses=0009 0009 15:13:16 Msec=0 True Az=135.9 Ze=-143.355 Az status=0009 Ze status=0009 15:13:16 Check angles 15:13:16 SkyScan query 15:13:17 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.385<-20159 Statuses=0009 0009 15:13:17 Msec=750 True Az=153.375 Ze=-122.385 Az status=0009 Ze status=0009 15:13:17 Check angles 15:13:17 SkyScan query 15:13:18 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.49<-18766 Statuses=0009 0009 15:13:18 Msec=1500 True Az=170.85 Ze=-101.49 Az status=0009 Ze status=0009 15:13:18 Check angles 15:13:18 SkyScan query 15:13:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.085<-17339 Statuses=0008 0009 15:13:18 Msec=2250 True Az=176.01 Ze=-80.085 Az status=0008 Ze status=0009 15:13:18 Check angles 15:13:18 SkyScan query 15:13:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.055<-15937 Statuses=0008 0009 15:13:19 Msec=3000 True Az=176.01 Ze=-59.055 Az status=0008 Ze status=0009 15:13:19 Check angles 15:13:19 SkyScan query 15:13:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:13:20 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:13:20 Message to Master queued w/err=0: serial=120491 error=0 15:13:25 Received message from Master: op=Filter serial=120492 15:13:25 Color wheel filter change from 0 to 0 15:13:25 FLIGetFilterPos err=0 currentPosition=0 15:13:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:25 Filter is already there-color wheel unchanged 15:13:25 Received message from Master: op=Shutter serial=120493 15:13:25 Shutter LASER close 15:13:25 Received message from Camera: op=State serial=120495 15:13:25 GetSingleValue result=40 Value=cccccccc 15:13:25 SkyScan query 15:13:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:13:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:26 Parameters OK 15:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:26 Set A/D data flow result=40 15:13:26 Set A/D channel type result=40 15:13:26 Set A/D encoding result=40 15:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:26 Set channel filter=0.000000e+000 result=40 15:13:26 Config A/D Result=40 15:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:26 Get A/D filter: -9.255963e+061 result=40 15:13:26 Get A/D value=-858993460 result=40 15:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:26 Parameters OK 15:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:26 Set A/D data flow result=40 15:13:26 Set A/D channel type result=40 15:13:26 Set A/D encoding result=40 15:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:26 Set channel filter=0.000000e+000 result=40 15:13:26 Config A/D Result=40 15:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:26 Get A/D filter: -9.255963e+061 result=40 15:13:26 Get A/D value=-858993460 result=40 15:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:26 Aux= 15:13:26 Message to Camera, serial 120495 queued 15:14:03 Received message from Master: op=PointingHead serial=120508 15:14:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:14:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:14:03 Point started: ret=0 15:14:03 point_skyscan result=0 15:14:04 Check angles 15:14:04 SkyScan query 15:14:04 SkyScan query done: ret=0 az=152.64<-10176 ze=-21.21<-13414 Statuses=0009 0009 15:14:04 Msec=0 True Az=152.64 Ze=-21.21 Az status=0009 Ze status=0009 15:14:04 Check angles 15:14:04 SkyScan query 15:14:05 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.255<-12017 Statuses=0009 0009 15:14:05 Msec=750 True Az=135.045 Ze=-0.255 Az status=0009 Ze status=0009 15:14:05 Check angles 15:14:05 SkyScan query 15:14:06 SkyScan query done: ret=0 az=117.54<-7836 ze=20.685<-10621 Statuses=0009 0009 15:14:06 Msec=1500 True Az=117.54 Ze=20.685 Az status=0009 Ze status=0009 15:14:06 Check angles 15:14:06 SkyScan query 15:14:07 SkyScan query done: ret=0 az=100.17<-6678 ze=41.67<-9222 Statuses=0009 0009 15:14:07 Msec=2250 True Az=100.17 Ze=41.67 Az status=0009 Ze status=0009 15:14:07 Check angles 15:14:07 SkyScan query 15:14:07 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:14:07 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:14:07 Check angles 15:14:07 SkyScan query 15:14:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:14:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:14:08 Message to Master queued w/err=0: serial=120508 error=0 15:14:13 Received message from Master: op=Filter serial=120509 15:14:13 Color wheel filter change from 0 to 0 15:14:13 FLIGetFilterPos err=0 currentPosition=0 15:14:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:13 Filter is already there-color wheel unchanged 15:14:13 Received message from Master: op=Shutter serial=120510 15:14:13 Shutter LASER close 15:14:13 Received message from Camera: op=State serial=120512 15:14:13 GetSingleValue result=40 Value=cccccccc 15:14:13 SkyScan query 15:14:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:14:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:14 Parameters OK 15:14:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:14 Set A/D data flow result=40 15:14:14 Set A/D channel type result=40 15:14:14 Set A/D encoding result=40 15:14:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:14 Set channel filter=0.000000e+000 result=40 15:14:14 Config A/D Result=40 15:14:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:14 Get A/D filter: -9.255963e+061 result=40 15:14:14 Get A/D value=-858993460 result=40 15:14:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:14 Parameters OK 15:14:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:14 Set A/D data flow result=40 15:14:14 Set A/D channel type result=40 15:14:14 Set A/D encoding result=40 15:14:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:14 Set channel filter=0.000000e+000 result=40 15:14:14 Config A/D Result=40 15:14:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:14 Get A/D filter: -9.255963e+061 result=40 15:14:14 Get A/D value=-858993460 result=40 15:14:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:14 Aux= 15:14:14 Message to Camera, serial 120512 queued 15:14:51 Received message from Master: op=PointingHead serial=120525 15:14:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:14:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:14:51 Point started: ret=0 15:14:51 point_skyscan result=0 15:14:52 Check angles 15:14:52 SkyScan query 15:14:52 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 15:14:52 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 15:14:52 Check angles 15:14:52 SkyScan query 15:14:53 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 15:14:53 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 15:14:53 Check angles 15:14:53 SkyScan query 15:14:54 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 15:14:54 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 15:14:54 Check angles 15:14:54 SkyScan query 15:14:55 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 15:14:55 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 15:14:55 Check angles 15:14:55 SkyScan query 15:14:55 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:14:55 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:14:55 Check angles 15:14:55 SkyScan query 15:14:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:14:56 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:14:56 Message to Master queued w/err=0: serial=120525 error=0 15:15:01 Received message from Master: op=Filter serial=120526 15:15:01 Color wheel filter change from 0 to 0 15:15:01 FLIGetFilterPos err=0 currentPosition=0 15:15:01 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:01 Filter is already there-color wheel unchanged 15:15:01 Received message from Master: op=Shutter serial=120527 15:15:01 Shutter LASER close 15:15:01 Received message from Camera: op=State serial=120529 15:15:01 GetSingleValue result=40 Value=cccccccc 15:15:01 SkyScan query 15:15:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:15:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:02 Parameters OK 15:15:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:02 Set A/D data flow result=40 15:15:02 Set A/D channel type result=40 15:15:02 Set A/D encoding result=40 15:15:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:02 Set channel filter=0.000000e+000 result=40 15:15:02 Config A/D Result=40 15:15:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:02 Get A/D filter: -9.255963e+061 result=40 15:15:02 Get A/D value=-858993460 result=40 15:15:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:02 Parameters OK 15:15:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:02 Set A/D data flow result=40 15:15:02 Set A/D channel type result=40 15:15:02 Set A/D encoding result=40 15:15:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:02 Set channel filter=0.000000e+000 result=40 15:15:02 Config A/D Result=40 15:15:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:02 Get A/D filter: -9.255963e+061 result=40 15:15:02 Get A/D value=-858993460 result=40 15:15:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:02 Aux= 15:15:02 Message to Camera, serial 120529 queued 15:15:27 Received message from Master: op=Identify serial=120530 15:15:39 Received message from Master: op=PointingHead serial=120545 15:15:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:15:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:15:39 Point started: ret=0 15:15:39 point_skyscan result=0 15:15:40 Check angles 15:15:40 SkyScan query 15:15:40 SkyScan query done: ret=0 az=153.165<-10211 ze=8.805<-11413 Statuses=0009 0009 15:15:40 Msec=0 True Az=153.165 Ze=8.805 Az status=0009 Ze status=0009 15:15:41 Check angles 15:15:41 SkyScan query 15:15:41 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.51<-12834 Statuses=0009 0009 15:15:41 Msec=750 True Az=135.33 Ze=-12.51 Az status=0009 Ze status=0009 15:15:41 Check angles 15:15:41 SkyScan query 15:15:42 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.45<-14230 Statuses=0009 0009 15:15:42 Msec=1500 True Az=117.81 Ze=-33.45 Az status=0009 Ze status=0009 15:15:42 Check angles 15:15:42 SkyScan query 15:15:43 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 15:15:43 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 15:15:43 Check angles 15:15:43 SkyScan query 15:15:43 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:15:43 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:15:44 Check angles 15:15:44 SkyScan query 15:15:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:15:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:15:44 Message to Master queued w/err=0: serial=120545 error=0 15:15:49 Received message from Master: op=Filter serial=120546 15:15:49 Color wheel filter change from 0 to 0 15:15:49 FLIGetFilterPos err=0 currentPosition=0 15:15:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:49 Filter is already there-color wheel unchanged 15:15:49 Received message from Master: op=Shutter serial=120547 15:15:49 Shutter LASER close 15:15:49 Received message from Camera: op=State serial=120549 15:15:49 GetSingleValue result=40 Value=cccccccc 15:15:49 SkyScan query 15:15:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:15:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:50 Parameters OK 15:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:50 Set A/D data flow result=40 15:15:50 Set A/D channel type result=40 15:15:50 Set A/D encoding result=40 15:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:50 Set channel filter=0.000000e+000 result=40 15:15:50 Config A/D Result=40 15:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:50 Get A/D filter: -9.255963e+061 result=40 15:15:50 Get A/D value=-858993460 result=40 15:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:50 Parameters OK 15:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:50 Set A/D data flow result=40 15:15:50 Set A/D channel type result=40 15:15:50 Set A/D encoding result=40 15:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:50 Set channel filter=0.000000e+000 result=40 15:15:50 Config A/D Result=40 15:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:50 Get A/D filter: -9.255963e+061 result=40 15:15:50 Get A/D value=-858993460 result=40 15:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:50 Aux= 15:15:50 Message to Camera, serial 120549 queued [UTC 2018-12-13 15:15:52] 15:16:27 Received message from Master: op=PointingHead serial=120562 15:16:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:16:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:16:27 Point started: ret=0 15:16:27 point_skyscan result=0 15:16:28 Check angles 15:16:28 SkyScan query 15:16:28 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.27<-17418 Statuses=0009 0009 15:16:28 Msec=0 True Az=108.96 Ze=-81.27 Az status=0009 Ze status=0009 15:16:29 Check angles 15:16:29 SkyScan query 15:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 15:16:29 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 15:16:29 Check angles 15:16:29 SkyScan query 15:16:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.065<-20271 Statuses=0008 0009 15:16:30 Msec=1500 True Az=112.995 Ze=-124.065 Az status=0008 Ze status=0009 15:16:30 Check angles 15:16:30 SkyScan query 15:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.455<-21697 Statuses=0008 0009 15:16:31 Msec=2250 True Az=112.995 Ze=-145.455 Az status=0008 Ze status=0009 15:16:31 Check angles 15:16:31 SkyScan query 15:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.395<-23093 Statuses=0008 0009 15:16:31 Msec=3000 True Az=112.995 Ze=-166.395 Az status=0008 Ze status=0009 15:16:32 Check angles 15:16:32 SkyScan query 15:16:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:16:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:16:32 Message to Master queued w/err=0: serial=120562 error=0 15:16:37 Received message from Master: op=Filter serial=120563 15:16:37 Color wheel filter change from 0 to 0 15:16:37 FLIGetFilterPos err=0 currentPosition=0 15:16:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:37 Filter is already there-color wheel unchanged 15:16:37 Received message from Master: op=Shutter serial=120564 15:16:37 Shutter LASER open 15:16:38 Received message from Camera: op=State serial=120566 15:16:38 GetSingleValue result=40 Value=cccccccc 15:16:38 SkyScan query 15:16:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:16:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:38 Parameters OK 15:16:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:38 Set A/D data flow result=40 15:16:38 Set A/D channel type result=40 15:16:38 Set A/D encoding result=40 15:16:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:38 Set channel filter=0.000000e+000 result=40 15:16:38 Config A/D Result=40 15:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:38 Get A/D filter: -9.255963e+061 result=40 15:16:38 Get A/D value=-858993460 result=40 15:16:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:38 Parameters OK 15:16:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:38 Set A/D data flow result=40 15:16:38 Set A/D channel type result=40 15:16:38 Set A/D encoding result=40 15:16:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:38 Set channel filter=0.000000e+000 result=40 15:16:38 Config A/D Result=40 15:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:38 Get A/D filter: -9.255963e+061 result=40 15:16:38 Get A/D value=-858993460 result=40 15:16:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:38 Aux= 15:16:38 Message to Camera, serial 120566 queued 15:16:47 Received message from Master: op=Shutter serial=120576 15:16:47 Shutter LASER close 15:16:47 Received message from Master: op=PointingHead serial=120580 15:16:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:16:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:16:47 Point started: ret=0 15:16:47 point_skyscan result=0 15:16:48 Check angles 15:16:48 SkyScan query 15:16:49 SkyScan query done: ret=0 az=89.52<-5968 ze=156.855<-1543 Statuses=0009 0009 15:16:49 Msec=0 True Az=89.52 Ze=156.855 Az status=0009 Ze status=0009 15:16:49 Check angles 15:16:49 SkyScan query 15:16:49 SkyScan query done: ret=0 az=72<-4800 ze=135.885<-2941 Statuses=0009 0009 15:16:49 Msec=750 True Az=72 Ze=135.885 Az status=0009 Ze status=0009 15:16:50 Check angles 15:16:50 SkyScan query 15:16:50 SkyScan query done: ret=0 az=54.66<-3644 ze=114.945<-4337 Statuses=0009 0009 15:16:50 Msec=1500 True Az=54.66 Ze=114.945 Az status=0009 Ze status=0009 15:16:50 Check angles 15:16:50 SkyScan query 15:16:51 SkyScan query done: ret=0 az=40.95<-2730 ze=93.975<-5735 Statuses=0009 0009 15:16:51 Msec=2250 True Az=40.95 Ze=93.975 Az status=0009 Ze status=0009 15:16:51 Check angles 15:16:51 SkyScan query 15:16:52 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 15:16:52 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 15:16:52 Check angles 15:16:52 SkyScan query 15:16:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 15:16:52 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 15:16:53 Check angles 15:16:53 SkyScan query 15:16:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:16:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:16:53 Message to Master queued w/err=0: serial=120580 error=0 15:16:58 Received message from Master: op=Filter serial=120581 15:16:58 Color wheel filter change from 0 to 0 15:16:58 FLIGetFilterPos err=0 currentPosition=0 15:16:58 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:58 Filter is already there-color wheel unchanged 15:16:58 Received message from Master: op=Shutter serial=120582 15:16:58 Shutter LASER close 15:16:59 Received message from Camera: op=State serial=120584 15:16:59 GetSingleValue result=40 Value=cccccccc 15:16:59 SkyScan query 15:16:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:16:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:59 Parameters OK 15:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:59 Set A/D data flow result=40 15:16:59 Set A/D channel type result=40 15:16:59 Set A/D encoding result=40 15:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:59 Set channel filter=0.000000e+000 result=40 15:16:59 Config A/D Result=40 15:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:59 Get A/D filter: -9.255963e+061 result=40 15:16:59 Get A/D value=-858993460 result=40 15:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:59 Parameters OK 15:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:59 Set A/D data flow result=40 15:16:59 Set A/D channel type result=40 15:16:59 Set A/D encoding result=40 15:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:59 Set channel filter=0.000000e+000 result=40 15:16:59 Config A/D Result=40 15:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:59 Get A/D filter: -9.255963e+061 result=40 15:16:59 Get A/D value=-858993460 result=40 15:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:59 Aux= 15:16:59 Message to Camera, serial 120584 queued 15:17:36 Received message from Master: op=PointingHead serial=120597 15:17:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:17:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:17:36 Point started: ret=0 15:17:36 point_skyscan result=0 15:17:37 Check angles 15:17:37 SkyScan query 15:17:38 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 15:17:38 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 15:17:38 Check angles 15:17:38 SkyScan query 15:17:39 SkyScan query done: ret=0 az=81.48<-5432 ze=66.495<-7567 Statuses=0009 0008 15:17:39 Msec=750 True Az=81.48 Ze=66.495 Az status=0009 Ze status=0008 15:17:39 Check angles 15:17:39 SkyScan query 15:17:39 SkyScan query done: ret=0 az=98.94<-6596 ze=66.495<-7567 Statuses=0009 0008 15:17:39 Msec=1500 True Az=98.94 Ze=66.495 Az status=0009 Ze status=0008 15:17:39 Check angles 15:17:39 SkyScan query 15:17:40 SkyScan query done: ret=0 az=116.475<-7765 ze=66.495<-7567 Statuses=0009 0008 15:17:40 Msec=2250 True Az=116.475 Ze=66.495 Az status=0009 Ze status=0008 15:17:40 Check angles 15:17:40 SkyScan query 15:17:41 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 15:17:41 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 15:17:41 Check angles 15:17:41 SkyScan query 15:17:42 SkyScan query done: ret=0 az=151.23<-10082 ze=66.495<-7567 Statuses=0009 0008 15:17:42 Msec=3750 True Az=151.23 Ze=66.495 Az status=0009 Ze status=0008 15:17:42 Check angles 15:17:42 SkyScan query 15:17:42 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:17:42 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:17:42 Message to Master queued w/err=0: serial=120597 error=0 15:17:47 Received message from Master: op=Filter serial=120598 15:17:47 Color wheel filter change from 0 to 0 15:17:47 FLIGetFilterPos err=0 currentPosition=0 15:17:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:47 Filter is already there-color wheel unchanged 15:17:47 Received message from Master: op=Shutter serial=120599 15:17:47 Shutter LASER close 15:17:47 Received message from Camera: op=State serial=120601 15:17:47 GetSingleValue result=40 Value=cccccccc 15:17:47 SkyScan query 15:17:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:17:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:48 Parameters OK 15:17:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:48 Set A/D data flow result=40 15:17:48 Set A/D channel type result=40 15:17:48 Set A/D encoding result=40 15:17:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:48 Set channel filter=0.000000e+000 result=40 15:17:48 Config A/D Result=40 15:17:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:48 Get A/D filter: -9.255963e+061 result=40 15:17:48 Get A/D value=-858993460 result=40 15:17:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:48 Parameters OK 15:17:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:48 Set A/D data flow result=40 15:17:48 Set A/D channel type result=40 15:17:48 Set A/D encoding result=40 15:17:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:48 Set channel filter=0.000000e+000 result=40 15:17:48 Config A/D Result=40 15:17:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:48 Get A/D filter: -9.255963e+061 result=40 15:17:48 Get A/D value=-858993460 result=40 15:17:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:48 Aux= 15:17:48 Message to Camera, serial 120601 queued 15:18:25 Received message from Master: op=PointingHead serial=120614 15:18:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:18:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:18:25 Point started: ret=0 15:18:25 point_skyscan result=0 15:18:26 Check angles 15:18:26 SkyScan query 15:18:27 SkyScan query done: ret=0 az=134.73<-8982 ze=36.615<-9559 Statuses=0009 0009 15:18:27 Msec=0 True Az=134.73 Ze=36.615 Az status=0009 Ze status=0009 15:18:27 Check angles 15:18:27 SkyScan query 15:18:27 SkyScan query done: ret=0 az=117.21<-7814 ze=15.69<-10954 Statuses=0009 0009 15:18:27 Msec=750 True Az=117.21 Ze=15.69 Az status=0009 Ze status=0009 15:18:27 Check angles 15:18:27 SkyScan query 15:18:28 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.28<-12352 Statuses=0009 0009 15:18:28 Msec=1500 True Az=99.855 Ze=-5.28 Az status=0009 Ze status=0009 15:18:28 Check angles 15:18:28 SkyScan query 15:18:29 SkyScan query done: ret=0 az=82.38<-5492 ze=-26.22<-13748 Statuses=0009 0009 15:18:29 Msec=2250 True Az=82.38 Ze=-26.22 Az status=0009 Ze status=0009 15:18:29 Check angles 15:18:29 SkyScan query 15:18:30 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.58<-14572 Statuses=0009 0008 15:18:30 Msec=3000 True Az=64.86 Ze=-38.58 Az status=0009 Ze status=0008 15:18:30 Check angles 15:18:30 SkyScan query 15:18:30 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.52<-14568 Statuses=0009 0008 15:18:30 Msec=3750 True Az=47.415 Ze=-38.52 Az status=0009 Ze status=0008 15:18:30 Check angles 15:18:30 SkyScan query 15:18:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:18:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:18:31 Message to Master queued w/err=0: serial=120614 error=0 15:18:36 Received message from Master: op=Filter serial=120615 15:18:36 Color wheel filter change from 0 to 0 15:18:36 FLIGetFilterPos err=0 currentPosition=0 15:18:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:36 Filter is already there-color wheel unchanged 15:18:36 Received message from Master: op=Shutter serial=120616 15:18:36 Shutter LASER close 15:18:36 Received message from Camera: op=State serial=120618 15:18:36 GetSingleValue result=40 Value=cccccccc 15:18:36 SkyScan query 15:18:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:18:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:37 Parameters OK 15:18:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:37 Set A/D data flow result=40 15:18:37 Set A/D channel type result=40 15:18:37 Set A/D encoding result=40 15:18:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:37 Set channel filter=0.000000e+000 result=40 15:18:37 Config A/D Result=40 15:18:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:37 Get A/D filter: -9.255963e+061 result=40 15:18:37 Get A/D value=-858993460 result=40 15:18:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:37 Parameters OK 15:18:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:37 Set A/D data flow result=40 15:18:37 Set A/D channel type result=40 15:18:37 Set A/D encoding result=40 15:18:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:37 Set channel filter=0.000000e+000 result=40 15:18:37 Config A/D Result=40 15:18:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:37 Get A/D filter: -9.255963e+061 result=40 15:18:37 Get A/D value=-858993460 result=40 15:18:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:37 Aux= 15:18:37 Message to Camera, serial 120618 queued 15:19:14 Received message from Master: op=PointingHead serial=120631 15:19:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:19:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:19:14 Point started: ret=0 15:19:14 point_skyscan result=0 15:19:15 Check angles 15:19:15 SkyScan query 15:19:15 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.43<-16562 Statuses=0009 0009 15:19:15 Msec=0 True Az=64.065 Ze=-68.43 Az status=0009 Ze status=0009 15:19:16 Check angles 15:19:16 SkyScan query 15:19:16 SkyScan query done: ret=0 az=81.87<-5458 ze=-89.79<-17986 Statuses=0009 0009 15:19:16 Msec=750 True Az=81.87 Ze=-89.79 Az status=0009 Ze status=0009 15:19:16 Check angles 15:19:16 SkyScan query 15:19:17 SkyScan query done: ret=0 az=99.42<-6628 ze=-110.76<-19384 Statuses=0009 0009 15:19:17 Msec=1500 True Az=99.42 Ze=-110.76 Az status=0009 Ze status=0009 15:19:17 Check angles 15:19:17 SkyScan query 15:19:18 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.7<-20780 Statuses=0009 0009 15:19:18 Msec=2250 True Az=117.015 Ze=-131.7 Az status=0009 Ze status=0009 15:19:18 Check angles 15:19:18 SkyScan query 15:19:18 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 15:19:18 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 15:19:19 Check angles 15:19:19 SkyScan query 15:19:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 15:19:19 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 15:19:19 Message to Master queued w/err=0: serial=120631 error=0 15:19:24 Received message from Master: op=Filter serial=120632 15:19:24 Color wheel filter change from 0 to 0 15:19:24 FLIGetFilterPos err=0 currentPosition=0 15:19:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:24 Filter is already there-color wheel unchanged 15:19:24 Received message from Master: op=Shutter serial=120633 15:19:24 Shutter LASER close 15:19:24 Received message from Camera: op=State serial=120635 15:19:24 GetSingleValue result=40 Value=cccccccc 15:19:24 SkyScan query 15:19:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:19:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:25 Parameters OK 15:19:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:25 Set A/D data flow result=40 15:19:25 Set A/D channel type result=40 15:19:25 Set A/D encoding result=40 15:19:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:25 Set channel filter=0.000000e+000 result=40 15:19:25 Config A/D Result=40 15:19:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:25 Get A/D filter: -9.255963e+061 result=40 15:19:25 Get A/D value=-858993460 result=40 15:19:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:25 Parameters OK 15:19:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:25 Set A/D data flow result=40 15:19:25 Set A/D channel type result=40 15:19:25 Set A/D encoding result=40 15:19:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:25 Set channel filter=0.000000e+000 result=40 15:19:25 Config A/D Result=40 15:19:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:25 Get A/D filter: -9.255963e+061 result=40 15:19:25 Get A/D value=-858993460 result=40 15:19:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:25 Aux= 15:19:25 Message to Camera, serial 120635 queued 15:20:02 Received message from Master: op=PointingHead serial=120648 15:20:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:20:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:20:02 Point started: ret=0 15:20:02 point_skyscan result=0 15:20:03 Check angles 15:20:03 SkyScan query 15:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.36<-23424 Statuses=0009 0009 15:20:03 Msec=0 True Az=112.995 Ze=-171.36 Az status=0009 Ze status=0009 15:20:04 Check angles 15:20:04 SkyScan query 15:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:20:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:20:04 Message to Master queued w/err=0: serial=120648 error=0 15:20:09 Received message from Master: op=Filter serial=120649 15:20:09 Color wheel filter change from 0 to 0 15:20:09 FLIGetFilterPos err=0 currentPosition=0 15:20:09 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:09 Filter is already there-color wheel unchanged 15:20:09 Received message from Master: op=Shutter serial=120650 15:20:09 Shutter LASER open 15:20:10 Received message from Camera: op=State serial=120652 15:20:10 GetSingleValue result=40 Value=cccccccc 15:20:10 SkyScan query 15:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:20:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:10 Parameters OK 15:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:10 Set A/D data flow result=40 15:20:10 Set A/D channel type result=40 15:20:10 Set A/D encoding result=40 15:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:10 Set channel filter=0.000000e+000 result=40 15:20:10 Config A/D Result=40 15:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:10 Get A/D filter: -9.255963e+061 result=40 15:20:10 Get A/D value=-858993460 result=40 15:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:10 Parameters OK 15:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:10 Set A/D data flow result=40 15:20:10 Set A/D channel type result=40 15:20:10 Set A/D encoding result=40 15:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:10 Set channel filter=0.000000e+000 result=40 15:20:10 Config A/D Result=40 15:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:10 Get A/D filter: -9.255963e+061 result=40 15:20:10 Get A/D value=-858993460 result=40 15:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:10 Aux= 15:20:10 Message to Camera, serial 120652 queued 15:20:19 Received message from Master: op=Shutter serial=120662 15:20:19 Shutter LASER close 15:20:19 Received message from Master: op=PointingHead serial=120666 15:20:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:20:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:20:20 Point started: ret=0 15:20:20 point_skyscan result=0 15:20:20 Check angles 15:20:20 SkyScan query 15:20:21 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.4<-21560 Statuses=0009 0009 15:20:21 Msec=0 True Az=135.78 Ze=-143.4 Az status=0009 Ze status=0009 15:20:21 Check angles 15:20:21 SkyScan query 15:20:22 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.445<-20163 Statuses=0009 0009 15:20:22 Msec=750 True Az=153.39 Ze=-122.445 Az status=0009 Ze status=0009 15:20:22 Check angles 15:20:22 SkyScan query 15:20:22 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.475<-18765 Statuses=0009 0009 15:20:22 Msec=1500 True Az=170.775 Ze=-101.475 Az status=0009 Ze status=0009 15:20:23 Check angles 15:20:23 SkyScan query 15:20:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.52<-17368 Statuses=0008 0009 15:20:23 Msec=2250 True Az=176.01 Ze=-80.52 Az status=0008 Ze status=0009 15:20:23 Check angles 15:20:23 SkyScan query 15:20:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.625<-15975 Statuses=0008 0009 15:20:24 Msec=3000 True Az=176.01 Ze=-59.625 Az status=0008 Ze status=0009 15:20:24 Check angles 15:20:24 SkyScan query 15:20:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:20:25 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:20:25 Message to Master queued w/err=0: serial=120666 error=0 15:20:30 Received message from Master: op=Filter serial=120667 15:20:30 Color wheel filter change from 0 to 0 15:20:30 FLIGetFilterPos err=0 currentPosition=0 15:20:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:30 Filter is already there-color wheel unchanged 15:20:30 Received message from Master: op=Shutter serial=120668 15:20:30 Shutter LASER close 15:20:30 Received message from Camera: op=State serial=120670 15:20:30 GetSingleValue result=40 Value=cccccccc 15:20:30 SkyScan query 15:20:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:20:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:31 Parameters OK 15:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:31 Set A/D data flow result=40 15:20:31 Set A/D channel type result=40 15:20:31 Set A/D encoding result=40 15:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:31 Set channel filter=0.000000e+000 result=40 15:20:31 Config A/D Result=40 15:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:31 Get A/D filter: -9.255963e+061 result=40 15:20:31 Get A/D value=-858993460 result=40 15:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:31 Parameters OK 15:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:31 Set A/D data flow result=40 15:20:31 Set A/D channel type result=40 15:20:31 Set A/D encoding result=40 15:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:31 Set channel filter=0.000000e+000 result=40 15:20:31 Config A/D Result=40 15:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:31 Get A/D filter: -9.255963e+061 result=40 15:20:31 Get A/D value=-858993460 result=40 15:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:31 Aux= 15:20:31 Message to Camera, serial 120670 queued 15:21:07 Received message from Master: op=PointingHead serial=120683 15:21:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:21:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:21:08 Point started: ret=0 15:21:08 point_skyscan result=0 15:21:08 Check angles 15:21:08 SkyScan query 15:21:09 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.6<-13440 Statuses=0009 0009 15:21:09 Msec=0 True Az=152.775 Ze=-21.6 Az status=0009 Ze status=0009 15:21:09 Check angles 15:21:09 SkyScan query 15:21:10 SkyScan query done: ret=0 az=134.925<-8995 ze=-0.165<-12011 Statuses=0009 0009 15:21:10 Msec=750 True Az=134.925 Ze=-0.165 Az status=0009 Ze status=0009 15:21:10 Check angles 15:21:10 SkyScan query 15:21:11 SkyScan query done: ret=0 az=117.495<-7833 ze=20.775<-10615 Statuses=0009 0009 15:21:11 Msec=1500 True Az=117.495 Ze=20.775 Az status=0009 Ze status=0009 15:21:11 Check angles 15:21:11 SkyScan query 15:21:11 SkyScan query done: ret=0 az=100.065<-6671 ze=41.745<-9217 Statuses=0009 0009 15:21:11 Msec=2250 True Az=100.065 Ze=41.745 Az status=0009 Ze status=0009 15:21:11 Check angles 15:21:11 SkyScan query 15:21:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 15:21:12 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 15:21:12 Check angles 15:21:12 SkyScan query 15:21:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:21:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:21:13 Message to Master queued w/err=0: serial=120683 error=0 15:21:18 Received message from Master: op=Filter serial=120684 15:21:18 Color wheel filter change from 0 to 0 15:21:18 FLIGetFilterPos err=0 currentPosition=0 15:21:18 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:18 Filter is already there-color wheel unchanged 15:21:18 Received message from Master: op=Shutter serial=120685 15:21:18 Shutter LASER close 15:21:18 Received message from Camera: op=State serial=120687 15:21:18 GetSingleValue result=40 Value=cccccccc 15:21:18 SkyScan query 15:21:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:21:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:19 Parameters OK 15:21:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:19 Set A/D data flow result=40 15:21:19 Set A/D channel type result=40 15:21:19 Set A/D encoding result=40 15:21:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:19 Set channel filter=0.000000e+000 result=40 15:21:19 Config A/D Result=40 15:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:19 Get A/D filter: -9.255963e+061 result=40 15:21:19 Get A/D value=-858993460 result=40 15:21:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:19 Parameters OK 15:21:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:19 Set A/D data flow result=40 15:21:19 Set A/D channel type result=40 15:21:19 Set A/D encoding result=40 15:21:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:19 Set channel filter=0.000000e+000 result=40 15:21:19 Config A/D Result=40 15:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:19 Get A/D filter: -9.255963e+061 result=40 15:21:19 Get A/D value=-858993460 result=40 15:21:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:19 Aux= 15:21:19 Message to Camera, serial 120687 queued 15:21:55 Received message from Master: op=PointingHead serial=120700 15:21:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:21:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:21:56 Point started: ret=0 15:21:56 point_skyscan result=0 15:21:57 Check angles 15:21:57 SkyScan query 15:21:57 SkyScan query done: ret=0 az=109.125<-7275 ze=38.475<-9435 Statuses=0009 0008 15:21:57 Msec=0 True Az=109.125 Ze=38.475 Az status=0009 Ze status=0008 15:21:57 Check angles 15:21:57 SkyScan query 15:21:58 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 15:21:58 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 15:21:58 Check angles 15:21:58 SkyScan query 15:21:59 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 15:21:59 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 15:21:59 Check angles 15:21:59 SkyScan query 15:21:59 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 15:21:59 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 15:22:00 Check angles 15:22:00 SkyScan query 15:22:00 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:22:00 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:22:00 Check angles 15:22:00 SkyScan query 15:22:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:22:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:22:01 Message to Master queued w/err=0: serial=120700 error=0 15:22:06 Received message from Master: op=Filter serial=120701 15:22:06 Color wheel filter change from 0 to 0 15:22:06 FLIGetFilterPos err=0 currentPosition=0 15:22:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:06 Filter is already there-color wheel unchanged 15:22:06 Received message from Master: op=Shutter serial=120702 15:22:06 Shutter LASER close 15:22:06 Received message from Camera: op=State serial=120704 15:22:06 GetSingleValue result=40 Value=cccccccc 15:22:06 SkyScan query 15:22:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:22:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:07 Parameters OK 15:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:07 Set A/D data flow result=40 15:22:07 Set A/D channel type result=40 15:22:07 Set A/D encoding result=40 15:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:07 Set channel filter=0.000000e+000 result=40 15:22:07 Config A/D Result=40 15:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:07 Get A/D filter: -9.255963e+061 result=40 15:22:07 Get A/D value=-858993460 result=40 15:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:07 Parameters OK 15:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:07 Set A/D data flow result=40 15:22:07 Set A/D channel type result=40 15:22:07 Set A/D encoding result=40 15:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:07 Set channel filter=0.000000e+000 result=40 15:22:07 Config A/D Result=40 15:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:07 Get A/D filter: -9.255963e+061 result=40 15:22:07 Get A/D value=-858993460 result=40 15:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:07 Aux= 15:22:07 Message to Camera, serial 120704 queued 15:22:44 Received message from Master: op=PointingHead serial=120717 15:22:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:22:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:22:44 Point started: ret=0 15:22:44 point_skyscan result=0 15:22:45 Check angles 15:22:45 SkyScan query 15:22:45 SkyScan query done: ret=0 az=152.985<-10199 ze=8.61<-11426 Statuses=0009 0009 15:22:45 Msec=0 True Az=152.985 Ze=8.61 Az status=0009 Ze status=0009 15:22:45 Check angles 15:22:45 SkyScan query 15:22:46 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.345<-12823 Statuses=0009 0009 15:22:46 Msec=750 True Az=135.405 Ze=-12.345 Az status=0009 Ze status=0009 15:22:46 Check angles 15:22:46 SkyScan query 15:22:47 SkyScan query done: ret=0 az=117.975<-7865 ze=-33.285<-14219 Statuses=0009 0009 15:22:47 Msec=1500 True Az=117.975 Ze=-33.285 Az status=0009 Ze status=0009 15:22:47 Check angles 15:22:47 SkyScan query 15:22:48 SkyScan query done: ret=0 az=100.59<-6706 ze=-51.54<-15436 Statuses=0009 0009 15:22:48 Msec=2250 True Az=100.59 Ze=-51.54 Az status=0009 Ze status=0009 15:22:48 Check angles 15:22:48 SkyScan query 15:22:48 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:22:48 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:22:48 Check angles 15:22:48 SkyScan query 15:22:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:22:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:22:49 Message to Master queued w/err=0: serial=120717 error=0 15:22:54 Received message from Master: op=Filter serial=120718 15:22:54 Color wheel filter change from 0 to 0 15:22:54 FLIGetFilterPos err=0 currentPosition=0 15:22:54 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:54 Filter is already there-color wheel unchanged 15:22:54 Received message from Master: op=Shutter serial=120719 15:22:54 Shutter LASER close 15:22:54 Received message from Camera: op=State serial=120721 15:22:54 GetSingleValue result=40 Value=cccccccc 15:22:54 SkyScan query 15:22:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:22:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:55 Parameters OK 15:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:55 Set A/D data flow result=40 15:22:55 Set A/D channel type result=40 15:22:55 Set A/D encoding result=40 15:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:55 Set channel filter=0.000000e+000 result=40 15:22:55 Config A/D Result=40 15:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:55 Get A/D filter: -9.255963e+061 result=40 15:22:55 Get A/D value=-858993460 result=40 15:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:55 Parameters OK 15:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:55 Set A/D data flow result=40 15:22:55 Set A/D channel type result=40 15:22:55 Set A/D encoding result=40 15:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:55 Set channel filter=0.000000e+000 result=40 15:22:55 Config A/D Result=40 15:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:55 Get A/D filter: -9.255963e+061 result=40 15:22:55 Get A/D value=-858993460 result=40 15:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:55 Aux= 15:22:55 Message to Camera, serial 120721 queued 15:23:32 Received message from Master: op=PointingHead serial=120734 15:23:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:23:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:23:32 Point started: ret=0 15:23:32 point_skyscan result=0 15:23:33 Check angles 15:23:33 SkyScan query 15:23:33 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.81<-17454 Statuses=0009 0009 15:23:33 Msec=0 True Az=109.395 Ze=-81.81 Az status=0009 Ze status=0009 15:23:34 Check angles 15:23:34 SkyScan query 15:23:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.125<-18875 Statuses=0008 0009 15:23:34 Msec=750 True Az=112.995 Ze=-103.125 Az status=0008 Ze status=0009 15:23:34 Check angles 15:23:34 SkyScan query 15:23:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.095<-20273 Statuses=0008 0009 15:23:35 Msec=1500 True Az=112.995 Ze=-124.095 Az status=0008 Ze status=0009 15:23:35 Check angles 15:23:35 SkyScan query 15:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 15:23:36 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 15:23:36 Check angles 15:23:36 SkyScan query 15:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.975<-23065 Statuses=0008 0009 15:23:36 Msec=3000 True Az=112.995 Ze=-165.975 Az status=0008 Ze status=0009 15:23:37 Check angles 15:23:37 SkyScan query 15:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:23:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:23:37 Message to Master queued w/err=0: serial=120734 error=0 15:23:42 Received message from Master: op=Filter serial=120735 15:23:42 Color wheel filter change from 0 to 0 15:23:42 FLIGetFilterPos err=0 currentPosition=0 15:23:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:42 Filter is already there-color wheel unchanged 15:23:42 Received message from Master: op=Shutter serial=120736 15:23:42 Shutter LASER open 15:23:42 Received message from Camera: op=State serial=120738 15:23:42 GetSingleValue result=40 Value=cccccccc 15:23:42 SkyScan query 15:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:23:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:43 Parameters OK 15:23:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:43 Set A/D data flow result=40 15:23:43 Set A/D channel type result=40 15:23:43 Set A/D encoding result=40 15:23:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:43 Set channel filter=0.000000e+000 result=40 15:23:43 Config A/D Result=40 15:23:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:43 Get A/D filter: -9.255963e+061 result=40 15:23:43 Get A/D value=-858993460 result=40 15:23:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:43 Parameters OK 15:23:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:43 Set A/D data flow result=40 15:23:43 Set A/D channel type result=40 15:23:43 Set A/D encoding result=40 15:23:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:43 Set channel filter=0.000000e+000 result=40 15:23:43 Config A/D Result=40 15:23:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:43 Get A/D filter: -9.255963e+061 result=40 15:23:43 Get A/D value=-858993460 result=40 15:23:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:43 Aux= 15:23:43 Message to Camera, serial 120738 queued 15:23:51 Received message from Master: op=Shutter serial=120748 15:23:51 Shutter LASER close 15:23:52 Received message from Master: op=PointingHead serial=120752 15:23:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:23:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:23:52 Point started: ret=0 15:23:52 point_skyscan result=0 15:23:53 Check angles 15:23:53 SkyScan query 15:23:54 SkyScan query done: ret=0 az=90.015<-6001 ze=157.38<-1508 Statuses=0009 0009 15:23:54 Msec=0 True Az=90.015 Ze=157.38 Az status=0009 Ze status=0009 15:23:54 Check angles 15:23:54 SkyScan query 15:23:54 SkyScan query done: ret=0 az=72.045<-4803 ze=135.99<-2934 Statuses=0009 0009 15:23:54 Msec=750 True Az=72.045 Ze=135.99 Az status=0009 Ze status=0009 15:23:55 Check angles 15:23:55 SkyScan query 15:23:55 SkyScan query done: ret=0 az=54.51<-3634 ze=114.555<-4363 Statuses=0009 0009 15:23:55 Msec=1500 True Az=54.51 Ze=114.555 Az status=0009 Ze status=0009 15:23:55 Check angles 15:23:55 SkyScan query 15:23:56 SkyScan query done: ret=0 az=40.935<-2729 ze=93.63<-5758 Statuses=0009 0009 15:23:56 Msec=2250 True Az=40.935 Ze=93.63 Az status=0009 Ze status=0009 15:23:56 Check angles 15:23:56 SkyScan query 15:23:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 15:23:57 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 15:23:57 Check angles 15:23:57 SkyScan query 15:23:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 15:23:57 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 15:23:58 Check angles 15:23:58 SkyScan query 15:23:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:23:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:23:58 Message to Master queued w/err=0: serial=120752 error=0 15:24:03 Received message from Master: op=Filter serial=120753 15:24:03 Color wheel filter change from 0 to 0 15:24:03 FLIGetFilterPos err=0 currentPosition=0 15:24:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:03 Filter is already there-color wheel unchanged 15:24:03 Received message from Master: op=Shutter serial=120754 15:24:03 Shutter LASER close 15:24:03 Received message from Camera: op=State serial=120756 15:24:03 GetSingleValue result=40 Value=cccccccc 15:24:03 SkyScan query 15:24:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:24:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:04 Parameters OK 15:24:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:04 Set A/D data flow result=40 15:24:04 Set A/D channel type result=40 15:24:04 Set A/D encoding result=40 15:24:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:04 Set channel filter=0.000000e+000 result=40 15:24:04 Config A/D Result=40 15:24:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:04 Get A/D filter: -9.255963e+061 result=40 15:24:04 Get A/D value=-858993460 result=40 15:24:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:04 Parameters OK 15:24:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:04 Set A/D data flow result=40 15:24:04 Set A/D channel type result=40 15:24:04 Set A/D encoding result=40 15:24:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:04 Set channel filter=0.000000e+000 result=40 15:24:04 Config A/D Result=40 15:24:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:04 Get A/D filter: -9.255963e+061 result=40 15:24:04 Get A/D value=-858993460 result=40 15:24:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:04 Aux= 15:24:04 Message to Camera, serial 120756 queued 15:24:41 Received message from Master: op=PointingHead serial=120769 15:24:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:24:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:24:41 Point started: ret=0 15:24:41 point_skyscan result=0 15:24:42 Check angles 15:24:42 SkyScan query 15:24:43 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 15:24:43 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 15:24:43 Check angles 15:24:43 SkyScan query 15:24:43 SkyScan query done: ret=0 az=81.615<-5441 ze=66.51<-7566 Statuses=0009 0008 15:24:43 Msec=750 True Az=81.615 Ze=66.51 Az status=0009 Ze status=0008 15:24:43 Check angles 15:24:43 SkyScan query 15:24:44 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 15:24:44 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 15:24:44 Check angles 15:24:44 SkyScan query 15:24:45 SkyScan query done: ret=0 az=116.7<-7780 ze=66.495<-7567 Statuses=0009 0008 15:24:45 Msec=2250 True Az=116.7 Ze=66.495 Az status=0009 Ze status=0008 15:24:45 Check angles 15:24:45 SkyScan query 15:24:46 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 15:24:46 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 15:24:46 Check angles 15:24:46 SkyScan query 15:24:46 SkyScan query done: ret=0 az=151.485<-10099 ze=66.495<-7567 Statuses=0009 0008 15:24:46 Msec=3750 True Az=151.485 Ze=66.495 Az status=0009 Ze status=0008 15:24:46 Check angles 15:24:46 SkyScan query 15:24:47 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:24:47 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:24:47 Message to Master queued w/err=0: serial=120769 error=0 15:24:52 Received message from Master: op=Filter serial=120770 15:24:52 Color wheel filter change from 0 to 0 15:24:52 FLIGetFilterPos err=0 currentPosition=0 15:24:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:52 Filter is already there-color wheel unchanged 15:24:52 Received message from Master: op=Shutter serial=120771 15:24:52 Shutter LASER close 15:24:52 Received message from Camera: op=State serial=120773 15:24:52 GetSingleValue result=40 Value=cccccccc 15:24:52 SkyScan query 15:24:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:24:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:53 Parameters OK 15:24:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:53 Set A/D data flow result=40 15:24:53 Set A/D channel type result=40 15:24:53 Set A/D encoding result=40 15:24:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:53 Set channel filter=0.000000e+000 result=40 15:24:53 Config A/D Result=40 15:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:53 Get A/D filter: -9.255963e+061 result=40 15:24:53 Get A/D value=-858993460 result=40 15:24:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:53 Parameters OK 15:24:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:53 Set A/D data flow result=40 15:24:53 Set A/D channel type result=40 15:24:53 Set A/D encoding result=40 15:24:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:53 Set channel filter=0.000000e+000 result=40 15:24:53 Config A/D Result=40 15:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:53 Get A/D filter: -9.255963e+061 result=40 15:24:53 Get A/D value=-858993460 result=40 15:24:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:53 Aux= 15:24:53 Message to Camera, serial 120773 queued 15:25:29 Received message from Master: op=PointingHead serial=120785 15:25:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:25:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:25:29 Point started: ret=0 15:25:29 point_skyscan result=0 15:25:30 Check angles 15:25:30 SkyScan query 15:25:30 SkyScan query done: ret=0 az=135.045<-9003 ze=36.705<-9553 Statuses=0009 0009 15:25:30 Msec=0 True Az=135.045 Ze=36.705 Az status=0009 Ze status=0009 15:25:31 Check angles 15:25:31 SkyScan query 15:25:31 SkyScan query done: ret=0 az=117.57<-7838 ze=15.78<-10948 Statuses=0009 0009 15:25:31 Msec=750 True Az=117.57 Ze=15.78 Az status=0009 Ze status=0009 15:25:31 Check angles 15:25:31 SkyScan query 15:25:32 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.19<-12346 Statuses=0009 0009 15:25:32 Msec=1500 True Az=100.2 Ze=-5.19 Az status=0009 Ze status=0009 15:25:32 Check angles 15:25:32 SkyScan query 15:25:33 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.565<-13771 Statuses=0009 0009 15:25:33 Msec=2250 True Az=82.26 Ze=-26.565 Az status=0009 Ze status=0009 15:25:33 Check angles 15:25:33 SkyScan query 15:25:33 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.565<-14571 Statuses=0009 0008 15:25:33 Msec=3000 True Az=64.8 Ze=-38.565 Az status=0009 Ze status=0008 15:25:34 Check angles 15:25:34 SkyScan query 15:25:34 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.535<-14569 Statuses=0009 0008 15:25:34 Msec=3750 True Az=47.355 Ze=-38.535 Az status=0009 Ze status=0008 15:25:34 Check angles 15:25:34 SkyScan query 15:25:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:25:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:25:35 Message to Master queued w/err=0: serial=120785 error=0 15:25:40 Received message from Master: op=Filter serial=120786 15:25:40 Color wheel filter change from 0 to 0 15:25:40 FLIGetFilterPos err=0 currentPosition=0 15:25:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:40 Filter is already there-color wheel unchanged 15:25:40 Received message from Master: op=Shutter serial=120787 15:25:40 Shutter LASER close 15:25:40 Received message from Camera: op=State serial=120789 15:25:40 GetSingleValue result=40 Value=cccccccc 15:25:40 SkyScan query 15:25:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:25:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:41 Parameters OK 15:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:41 Set A/D data flow result=40 15:25:41 Set A/D channel type result=40 15:25:41 Set A/D encoding result=40 15:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:41 Set channel filter=0.000000e+000 result=40 15:25:41 Config A/D Result=40 15:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:41 Get A/D filter: -9.255963e+061 result=40 15:25:41 Get A/D value=-858993460 result=40 15:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:41 Parameters OK 15:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:41 Set A/D data flow result=40 15:25:41 Set A/D channel type result=40 15:25:41 Set A/D encoding result=40 15:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:41 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-13 15:25:41] 15:25:41 Config A/D Result=40 15:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:41 Get A/D filter: -9.255963e+061 result=40 15:25:41 Get A/D value=-858993460 result=40 15:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:41 Aux= 15:25:41 Message to Camera, serial 120789 queued 15:26:18 Received message from Master: op=PointingHead serial=120802 15:26:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:26:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:26:18 Point started: ret=0 15:26:18 point_skyscan result=0 15:26:19 Check angles 15:26:19 SkyScan query 15:26:19 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.58<-16572 Statuses=0009 0009 15:26:19 Msec=0 True Az=64.23 Ze=-68.58 Az status=0009 Ze status=0009 15:26:19 Check angles 15:26:19 SkyScan query 15:26:20 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.565<-17971 Statuses=0009 0009 15:26:20 Msec=750 True Az=81.735 Ze=-89.565 Az status=0009 Ze status=0009 15:26:20 Check angles 15:26:20 SkyScan query 15:26:21 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.535<-19369 Statuses=0009 0009 15:26:21 Msec=1500 True Az=99.15 Ze=-110.535 Az status=0009 Ze status=0009 15:26:21 Check angles 15:26:21 SkyScan query 15:26:22 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.475<-20765 Statuses=0009 0009 15:26:22 Msec=2250 True Az=116.73 Ze=-131.475 Az status=0009 Ze status=0009 15:26:22 Check angles 15:26:22 SkyScan query 15:26:22 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 15:26:22 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 15:26:22 Check angles 15:26:22 SkyScan query 15:26:23 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:26:23 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:26:23 Message to Master queued w/err=0: serial=120802 error=0 15:26:28 Received message from Master: op=Filter serial=120803 15:26:28 Color wheel filter change from 0 to 0 15:26:28 FLIGetFilterPos err=0 currentPosition=0 15:26:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:28 Filter is already there-color wheel unchanged 15:26:28 Received message from Master: op=Shutter serial=120804 15:26:28 Shutter LASER close 15:26:28 Received message from Camera: op=State serial=120806 15:26:28 GetSingleValue result=40 Value=cccccccc 15:26:28 SkyScan query 15:26:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:26:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:29 Parameters OK 15:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:29 Set A/D data flow result=40 15:26:29 Set A/D channel type result=40 15:26:29 Set A/D encoding result=40 15:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:29 Set channel filter=0.000000e+000 result=40 15:26:29 Config A/D Result=40 15:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:29 Get A/D filter: -9.255963e+061 result=40 15:26:29 Get A/D value=-858993460 result=40 15:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:29 Parameters OK 15:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:29 Set A/D data flow result=40 15:26:29 Set A/D channel type result=40 15:26:29 Set A/D encoding result=40 15:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:29 Set channel filter=0.000000e+000 result=40 15:26:29 Config A/D Result=40 15:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:29 Get A/D filter: -9.255963e+061 result=40 15:26:29 Get A/D value=-858993460 result=40 15:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:26:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:26:29 Aux= 15:26:29 Message to Camera, serial 120806 queued 15:27:06 Received message from Master: op=PointingHead serial=120819 15:27:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:27:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:27:06 Point started: ret=0 15:27:06 point_skyscan result=0 15:27:07 Check angles 15:27:07 SkyScan query 15:27:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 15:27:07 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 15:27:07 Check angles 15:27:07 SkyScan query 15:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:27:08 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:27:08 Message to Master queued w/err=0: serial=120819 error=0 15:27:13 Received message from Master: op=Filter serial=120820 15:27:13 Color wheel filter change from 0 to 0 15:27:13 FLIGetFilterPos err=0 currentPosition=0 15:27:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:13 Filter is already there-color wheel unchanged 15:27:13 Received message from Master: op=Shutter serial=120821 15:27:13 Shutter LASER open 15:27:13 Received message from Camera: op=State serial=120823 15:27:13 GetSingleValue result=40 Value=cccccccc 15:27:13 SkyScan query 15:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:27:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:14 Parameters OK 15:27:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:14 Set A/D data flow result=40 15:27:14 Set A/D channel type result=40 15:27:14 Set A/D encoding result=40 15:27:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:14 Set channel filter=0.000000e+000 result=40 15:27:14 Config A/D Result=40 15:27:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:14 Get A/D filter: -9.255963e+061 result=40 15:27:14 Get A/D value=-858993460 result=40 15:27:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:14 Parameters OK 15:27:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:14 Set A/D data flow result=40 15:27:14 Set A/D channel type result=40 15:27:14 Set A/D encoding result=40 15:27:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:14 Set channel filter=0.000000e+000 result=40 15:27:14 Config A/D Result=40 15:27:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:14 Get A/D filter: -9.255963e+061 result=40 15:27:14 Get A/D value=-858993460 result=40 15:27:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:14 Aux= 15:27:14 Message to Camera, serial 120823 queued 15:27:21 Received message from Master: op=Shutter serial=120832 15:27:21 Shutter LASER close 15:27:22 Received message from Master: op=PointingHead serial=120836 15:27:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:27:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:27:22 Point started: ret=0 15:27:22 point_skyscan result=0 15:27:23 Check angles 15:27:23 SkyScan query 15:27:24 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.385<-21559 Statuses=0009 0009 15:27:24 Msec=0 True Az=135.825 Ze=-143.385 Az status=0009 Ze status=0009 15:27:24 Check angles 15:27:24 SkyScan query 15:27:24 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.965<-20131 Statuses=0009 0009 15:27:24 Msec=750 True Az=153.705 Ze=-121.965 Az status=0009 Ze status=0009 15:27:25 Check angles 15:27:25 SkyScan query 15:27:25 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.04<-18736 Statuses=0009 0009 15:27:25 Msec=1500 True Az=171.24 Ze=-101.04 Az status=0009 Ze status=0009 15:27:25 Check angles 15:27:25 SkyScan query 15:27:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.1<-17340 Statuses=0008 0009 15:27:26 Msec=2250 True Az=176.01 Ze=-80.1 Az status=0008 Ze status=0009 15:27:26 Check angles 15:27:26 SkyScan query 15:27:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 15:27:27 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 15:27:27 Check angles 15:27:27 SkyScan query 15:27:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:27:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:27:28 Message to Master queued w/err=0: serial=120836 error=0 15:27:33 Received message from Master: op=Filter serial=120837 15:27:33 Color wheel filter change from 0 to 0 15:27:33 FLIGetFilterPos err=0 currentPosition=0 15:27:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:33 Filter is already there-color wheel unchanged 15:27:33 Received message from Master: op=Shutter serial=120838 15:27:33 Shutter LASER close 15:27:33 Received message from Camera: op=State serial=120840 15:27:33 GetSingleValue result=40 Value=cccccccc 15:27:33 SkyScan query 15:27:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:27:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:33 Parameters OK 15:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:33 Set A/D data flow result=40 15:27:33 Set A/D channel type result=40 15:27:33 Set A/D encoding result=40 15:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:33 Set channel filter=0.000000e+000 result=40 15:27:33 Config A/D Result=40 15:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:33 Get A/D filter: -9.255963e+061 result=40 15:27:33 Get A/D value=-858993460 result=40 15:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:33 Parameters OK 15:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:33 Set A/D data flow result=40 15:27:33 Set A/D channel type result=40 15:27:33 Set A/D encoding result=40 15:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:33 Set channel filter=0.000000e+000 result=40 15:27:33 Config A/D Result=40 15:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:33 Get A/D filter: -9.255963e+061 result=40 15:27:33 Get A/D value=-858993460 result=40 15:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:33 Aux= 15:27:33 Message to Camera, serial 120840 queued 15:28:10 Received message from Master: op=PointingHead serial=120853 15:28:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:28:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:28:11 Point started: ret=0 15:28:11 point_skyscan result=0 15:28:11 Check angles 15:28:11 SkyScan query 15:28:12 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.555<-13437 Statuses=0009 0009 15:28:12 Msec=0 True Az=152.79 Ze=-21.555 Az status=0009 Ze status=0009 15:28:12 Check angles 15:28:12 SkyScan query 15:28:13 SkyScan query done: ret=0 az=134.94<-8996 ze=-0.105<-12007 Statuses=0009 0009 15:28:13 Msec=750 True Az=134.94 Ze=-0.105 Az status=0009 Ze status=0009 15:28:13 Check angles 15:28:13 SkyScan query 15:28:13 SkyScan query done: ret=0 az=117.42<-7828 ze=20.85<-10610 Statuses=0009 0009 15:28:13 Msec=1500 True Az=117.42 Ze=20.85 Az status=0009 Ze status=0009 15:28:14 Check angles 15:28:14 SkyScan query 15:28:14 SkyScan query done: ret=0 az=100.02<-6668 ze=41.805<-9213 Statuses=0009 0009 15:28:14 Msec=2250 True Az=100.02 Ze=41.805 Az status=0009 Ze status=0009 15:28:14 Check angles 15:28:14 SkyScan query 15:28:15 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 15:28:15 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 15:28:15 Check angles 15:28:15 SkyScan query 15:28:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:28:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:28:16 Message to Master queued w/err=0: serial=120853 error=0 15:28:21 Received message from Master: op=Filter serial=120854 15:28:21 Color wheel filter change from 0 to 0 15:28:21 FLIGetFilterPos err=0 currentPosition=0 15:28:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:21 Filter is already there-color wheel unchanged 15:28:21 Received message from Master: op=Shutter serial=120855 15:28:21 Shutter LASER close 15:28:21 Received message from Camera: op=State serial=120857 15:28:21 GetSingleValue result=40 Value=cccccccc 15:28:21 SkyScan query 15:28:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:28:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:22 Parameters OK 15:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:22 Set A/D data flow result=40 15:28:22 Set A/D channel type result=40 15:28:22 Set A/D encoding result=40 15:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:22 Set channel filter=0.000000e+000 result=40 15:28:22 Config A/D Result=40 15:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:22 Get A/D filter: -9.255963e+061 result=40 15:28:22 Get A/D value=-858993460 result=40 15:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:22 Parameters OK 15:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:22 Set A/D data flow result=40 15:28:22 Set A/D channel type result=40 15:28:22 Set A/D encoding result=40 15:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:22 Set channel filter=0.000000e+000 result=40 15:28:22 Config A/D Result=40 15:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:22 Get A/D filter: -9.255963e+061 result=40 15:28:22 Get A/D value=-858993460 result=40 15:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:28:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:28:22 Aux= 15:28:22 Message to Camera, serial 120857 queued 15:28:58 Received message from Master: op=PointingHead serial=120870 15:28:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:28:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:28:59 Point started: ret=0 15:28:59 point_skyscan result=0 15:28:59 Check angles 15:28:59 SkyScan query 15:29:00 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 15:29:00 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 15:29:00 Check angles 15:29:00 SkyScan query 15:29:01 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 15:29:01 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 15:29:01 Check angles 15:29:01 SkyScan query 15:29:02 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 15:29:02 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 15:29:02 Check angles 15:29:02 SkyScan query 15:29:02 SkyScan query done: ret=0 az=161.745<-10783 ze=38.505<-9433 Statuses=0009 0008 15:29:02 Msec=2250 True Az=161.745 Ze=38.505 Az status=0009 Ze status=0008 15:29:02 Check angles 15:29:02 SkyScan query 15:29:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:29:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:29:03 Check angles 15:29:03 SkyScan query 15:29:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:29:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:29:04 Message to Master queued w/err=0: serial=120870 error=0 15:29:09 Received message from Master: op=Filter serial=120871 15:29:09 Color wheel filter change from 0 to 0 15:29:09 FLIGetFilterPos err=0 currentPosition=0 15:29:09 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:09 Filter is already there-color wheel unchanged 15:29:09 Received message from Master: op=Shutter serial=120872 15:29:09 Shutter LASER close 15:29:09 Received message from Camera: op=State serial=120874 15:29:09 GetSingleValue result=40 Value=cccccccc 15:29:09 SkyScan query 15:29:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:29:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:10 Parameters OK 15:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:10 Set A/D data flow result=40 15:29:10 Set A/D channel type result=40 15:29:10 Set A/D encoding result=40 15:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:10 Set channel filter=0.000000e+000 result=40 15:29:10 Config A/D Result=40 15:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:10 Get A/D filter: -9.255963e+061 result=40 15:29:10 Get A/D value=-858993460 result=40 15:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:10 Parameters OK 15:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:10 Set A/D data flow result=40 15:29:10 Set A/D channel type result=40 15:29:10 Set A/D encoding result=40 15:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:10 Set channel filter=0.000000e+000 result=40 15:29:10 Config A/D Result=40 15:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:10 Get A/D filter: -9.255963e+061 result=40 15:29:10 Get A/D value=-858993460 result=40 15:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:10 Aux= 15:29:10 Message to Camera, serial 120874 queued 15:29:46 Received message from Master: op=PointingHead serial=120887 15:29:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:29:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:29:47 Point started: ret=0 15:29:47 point_skyscan result=0 15:29:48 Check angles 15:29:48 SkyScan query 15:29:48 SkyScan query done: ret=0 az=152.76<-10184 ze=8.37<-11442 Statuses=0009 0009 15:29:48 Msec=0 True Az=152.76 Ze=8.37 Az status=0009 Ze status=0009 15:29:48 Check angles 15:29:48 SkyScan query 15:29:49 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.585<-12839 Statuses=0009 0009 15:29:49 Msec=750 True Az=135.18 Ze=-12.585 Az status=0009 Ze status=0009 15:29:49 Check angles 15:29:49 SkyScan query 15:29:50 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.51<-14234 Statuses=0009 0009 15:29:50 Msec=1500 True Az=117.6 Ze=-33.51 Az status=0009 Ze status=0009 15:29:50 Check angles 15:29:50 SkyScan query 15:29:50 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 15:29:50 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 15:29:51 Check angles 15:29:51 SkyScan query 15:29:51 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:29:51 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:29:51 Check angles 15:29:51 SkyScan query 15:29:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:29:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:29:52 Message to Master queued w/err=0: serial=120887 error=0 15:29:57 Received message from Master: op=Filter serial=120888 15:29:57 Color wheel filter change from 0 to 0 15:29:57 FLIGetFilterPos err=0 currentPosition=0 15:29:57 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:57 Filter is already there-color wheel unchanged 15:29:57 Received message from Master: op=Shutter serial=120889 15:29:57 Shutter LASER close 15:29:57 Received message from Camera: op=State serial=120891 15:29:57 GetSingleValue result=40 Value=cccccccc 15:29:57 SkyScan query 15:29:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:29:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:58 Parameters OK 15:29:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:58 Set A/D data flow result=40 15:29:58 Set A/D channel type result=40 15:29:58 Set A/D encoding result=40 15:29:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:58 Set channel filter=0.000000e+000 result=40 15:29:58 Config A/D Result=40 15:29:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:58 Get A/D filter: -9.255963e+061 result=40 15:29:58 Get A/D value=-858993460 result=40 15:29:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:58 Parameters OK 15:29:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:58 Set A/D data flow result=40 15:29:58 Set A/D channel type result=40 15:29:58 Set A/D encoding result=40 15:29:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:58 Set channel filter=0.000000e+000 result=40 15:29:58 Config A/D Result=40 15:29:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:58 Get A/D filter: -9.255963e+061 result=40 15:29:58 Get A/D value=-858993460 result=40 15:29:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:58 Aux= 15:29:58 Message to Camera, serial 120891 queued 15:30:34 Received message from Master: op=PointingHead serial=120904 15:30:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:30:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:30:35 Point started: ret=0 15:30:35 point_skyscan result=0 15:30:36 Check angles 15:30:36 SkyScan query 15:30:36 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.3<-17420 Statuses=0009 0009 15:30:36 Msec=0 True Az=109.005 Ze=-81.3 Az status=0009 Ze status=0009 15:30:36 Check angles 15:30:36 SkyScan query 15:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 15:30:37 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 15:30:37 Check angles 15:30:37 SkyScan query 15:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 15:30:38 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 15:30:38 Check angles 15:30:38 SkyScan query 15:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 15:30:38 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 15:30:39 Check angles 15:30:39 SkyScan query 15:30:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.135<-23009 Statuses=0008 0009 15:30:39 Msec=3000 True Az=112.995 Ze=-165.135 Az status=0008 Ze status=0009 15:30:39 Check angles 15:30:39 SkyScan query 15:30:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:30:40 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:30:40 Message to Master queued w/err=0: serial=120904 error=0 15:30:45 Received message from Master: op=Filter serial=120905 15:30:45 Color wheel filter change from 0 to 0 15:30:45 FLIGetFilterPos err=0 currentPosition=0 15:30:45 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:45 Filter is already there-color wheel unchanged 15:30:45 Received message from Master: op=Shutter serial=120906 15:30:45 Shutter LASER open 15:30:45 Received message from Camera: op=State serial=120908 15:30:45 GetSingleValue result=40 Value=cccccccc 15:30:45 SkyScan query 15:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:30:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:46 Parameters OK 15:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:46 Set A/D data flow result=40 15:30:46 Set A/D channel type result=40 15:30:46 Set A/D encoding result=40 15:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:46 Set channel filter=0.000000e+000 result=40 15:30:46 Config A/D Result=40 15:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:46 Get A/D filter: -9.255963e+061 result=40 15:30:46 Get A/D value=-858993460 result=40 15:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:46 Parameters OK 15:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:46 Set A/D data flow result=40 15:30:46 Set A/D channel type result=40 15:30:46 Set A/D encoding result=40 15:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:46 Set channel filter=0.000000e+000 result=40 15:30:46 Config A/D Result=40 15:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:46 Get A/D filter: -9.255963e+061 result=40 15:30:46 Get A/D value=-858993460 result=40 15:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:46 Aux= 15:30:46 Message to Camera, serial 120908 queued 15:30:54 Received message from Master: op=Shutter serial=120918 15:30:54 Shutter LASER close 15:30:55 Received message from Master: op=PointingHead serial=120922 15:30:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:30:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:30:55 Point started: ret=0 15:30:55 point_skyscan result=0 15:30:56 Check angles 15:30:56 SkyScan query 15:30:56 SkyScan query done: ret=0 az=90.015<-6001 ze=157.365<-1509 Statuses=0009 0009 15:30:56 Msec=0 True Az=90.015 Ze=157.365 Az status=0009 Ze status=0009 15:30:57 Check angles 15:30:57 SkyScan query 15:30:57 SkyScan query done: ret=0 az=72.57<-4838 ze=136.38<-2908 Statuses=0009 0009 15:30:57 Msec=750 True Az=72.57 Ze=136.38 Az status=0009 Ze status=0009 15:30:57 Check angles 15:30:57 SkyScan query 15:30:58 SkyScan query done: ret=0 az=55.065<-3671 ze=115.47<-4302 Statuses=0009 0009 15:30:58 Msec=1500 True Az=55.065 Ze=115.47 Az status=0009 Ze status=0009 15:30:58 Check angles 15:30:58 SkyScan query 15:30:59 SkyScan query done: ret=0 az=40.95<-2730 ze=94.485<-5701 Statuses=0009 0009 15:30:59 Msec=2250 True Az=40.95 Ze=94.485 Az status=0009 Ze status=0009 15:30:59 Check angles 15:30:59 SkyScan query 15:30:59 SkyScan query done: ret=0 az=40.995<-2733 ze=73.545<-7097 Statuses=0008 0009 15:30:59 Msec=3000 True Az=40.995 Ze=73.545 Az status=0008 Ze status=0009 15:31:00 Check angles 15:31:00 SkyScan query 15:31:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.935<-8471 Statuses=0008 0009 15:31:00 Msec=3750 True Az=40.995 Ze=52.935 Az status=0008 Ze status=0009 15:31:00 Check angles 15:31:00 SkyScan query 15:31:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:31:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:31:01 Message to Master queued w/err=0: serial=120922 error=0 15:31:06 Received message from Master: op=Filter serial=120923 15:31:06 Color wheel filter change from 0 to 0 15:31:06 FLIGetFilterPos err=0 currentPosition=0 15:31:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:31:06 Filter is already there-color wheel unchanged 15:31:06 Received message from Master: op=Shutter serial=120924 15:31:06 Shutter LASER close 15:31:06 Received message from Camera: op=State serial=120926 15:31:06 GetSingleValue result=40 Value=cccccccc 15:31:06 SkyScan query 15:31:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:31:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:07 Parameters OK 15:31:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:07 Set A/D data flow result=40 15:31:07 Set A/D channel type result=40 15:31:07 Set A/D encoding result=40 15:31:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:07 Set channel filter=0.000000e+000 result=40 15:31:07 Config A/D Result=40 15:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:07 Get A/D filter: -9.255963e+061 result=40 15:31:07 Get A/D value=-858993460 result=40 15:31:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:07 Parameters OK 15:31:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:07 Set A/D data flow result=40 15:31:07 Set A/D channel type result=40 15:31:07 Set A/D encoding result=40 15:31:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:07 Set channel filter=0.000000e+000 result=40 15:31:07 Config A/D Result=40 15:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:07 Get A/D filter: -9.255963e+061 result=40 15:31:07 Get A/D value=-858993460 result=40 15:31:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:31:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:31:07 Aux= 15:31:07 Message to Camera, serial 120926 queued 15:31:44 Received message from Master: op=PointingHead serial=120939 15:31:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:31:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:31:44 Point started: ret=0 15:31:44 point_skyscan result=0 15:31:45 Check angles 15:31:45 SkyScan query 15:31:45 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 15:31:45 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 15:31:46 Check angles 15:31:46 SkyScan query 15:31:46 SkyScan query done: ret=0 az=81.54<-5436 ze=66.495<-7567 Statuses=0009 0008 15:31:46 Msec=750 True Az=81.54 Ze=66.495 Az status=0009 Ze status=0008 15:31:46 Check angles 15:31:46 SkyScan query 15:31:47 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 15:31:47 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 15:31:47 Check angles 15:31:47 SkyScan query 15:31:48 SkyScan query done: ret=0 az=116.505<-7767 ze=66.495<-7567 Statuses=0009 0008 15:31:48 Msec=2250 True Az=116.505 Ze=66.495 Az status=0009 Ze status=0008 15:31:48 Check angles 15:31:48 SkyScan query 15:31:48 SkyScan query done: ret=0 az=133.92<-8928 ze=66.495<-7567 Statuses=0009 0008 15:31:48 Msec=3000 True Az=133.92 Ze=66.495 Az status=0009 Ze status=0008 15:31:49 Check angles 15:31:49 SkyScan query 15:31:49 SkyScan query done: ret=0 az=151.29<-10086 ze=66.495<-7567 Statuses=0009 0008 15:31:49 Msec=3750 True Az=151.29 Ze=66.495 Az status=0009 Ze status=0008 15:31:49 Check angles 15:31:49 SkyScan query 15:31:50 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:31:50 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:31:50 Message to Master queued w/err=0: serial=120939 error=0 15:31:55 Received message from Master: op=Filter serial=120940 15:31:55 Color wheel filter change from 0 to 0 15:31:55 FLIGetFilterPos err=0 currentPosition=0 15:31:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:31:55 Filter is already there-color wheel unchanged 15:31:55 Received message from Master: op=Shutter serial=120941 15:31:55 Shutter LASER close 15:31:55 Received message from Camera: op=State serial=120943 15:31:55 GetSingleValue result=40 Value=cccccccc 15:31:55 SkyScan query 15:31:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:31:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:56 Parameters OK 15:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:56 Set A/D data flow result=40 15:31:56 Set A/D channel type result=40 15:31:56 Set A/D encoding result=40 15:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:56 Set channel filter=0.000000e+000 result=40 15:31:56 Config A/D Result=40 15:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:56 Get A/D filter: -9.255963e+061 result=40 15:31:56 Get A/D value=-858993460 result=40 15:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:56 Parameters OK 15:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:56 Set A/D data flow result=40 15:31:56 Set A/D channel type result=40 15:31:56 Set A/D encoding result=40 15:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:56 Set channel filter=0.000000e+000 result=40 15:31:56 Config A/D Result=40 15:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:56 Get A/D filter: -9.255963e+061 result=40 15:31:56 Get A/D value=-858993460 result=40 15:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:31:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:31:56 Aux= 15:31:56 Message to Camera, serial 120943 queued 15:32:33 Received message from Master: op=PointingHead serial=120956 15:32:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:32:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:32:33 Point started: ret=0 15:32:33 point_skyscan result=0 15:32:34 Check angles 15:32:34 SkyScan query 15:32:34 SkyScan query done: ret=0 az=134.79<-8986 ze=36.6<-9560 Statuses=0009 0009 15:32:34 Msec=0 True Az=134.79 Ze=36.6 Az status=0009 Ze status=0009 15:32:34 Check angles 15:32:34 SkyScan query 15:32:35 SkyScan query done: ret=0 az=117.03<-7802 ze=15.24<-10984 Statuses=0009 0009 15:32:35 Msec=750 True Az=117.03 Ze=15.24 Az status=0009 Ze status=0009 15:32:35 Check angles 15:32:35 SkyScan query 15:32:36 SkyScan query done: ret=0 az=99.255<-6617 ze=-6.21<-12414 Statuses=0009 0009 15:32:36 Msec=1500 True Az=99.255 Ze=-6.21 Az status=0009 Ze status=0009 15:32:36 Check angles 15:32:36 SkyScan query 15:32:36 SkyScan query done: ret=0 az=81.75<-5450 ze=-27.165<-13811 Statuses=0009 0009 15:32:36 Msec=2250 True Az=81.75 Ze=-27.165 Az status=0009 Ze status=0009 15:32:37 Check angles 15:32:37 SkyScan query 15:32:37 SkyScan query done: ret=0 az=64.305<-4287 ze=-38.565<-14571 Statuses=0009 0008 15:32:37 Msec=3000 True Az=64.305 Ze=-38.565 Az status=0009 Ze status=0008 15:32:37 Check angles 15:32:37 SkyScan query 15:32:38 SkyScan query done: ret=0 az=46.755<-3117 ze=-38.535<-14569 Statuses=0009 0008 15:32:38 Msec=3750 True Az=46.755 Ze=-38.535 Az status=0009 Ze status=0008 15:32:38 Check angles 15:32:38 SkyScan query 15:32:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:32:39 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:32:39 Message to Master queued w/err=0: serial=120956 error=0 15:32:44 Received message from Master: op=Filter serial=120957 15:32:44 Color wheel filter change from 0 to 0 15:32:44 FLIGetFilterPos err=0 currentPosition=0 15:32:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:44 Filter is already there-color wheel unchanged 15:32:44 Received message from Master: op=Shutter serial=120958 15:32:44 Shutter LASER close 15:32:44 Received message from Camera: op=State serial=120960 15:32:44 GetSingleValue result=40 Value=cccccccc 15:32:44 SkyScan query 15:32:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:32:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:45 Parameters OK 15:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:45 Set A/D data flow result=40 15:32:45 Set A/D channel type result=40 15:32:45 Set A/D encoding result=40 15:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:45 Set channel filter=0.000000e+000 result=40 15:32:45 Config A/D Result=40 15:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:45 Get A/D filter: -9.255963e+061 result=40 15:32:45 Get A/D value=-858993460 result=40 15:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:45 Parameters OK 15:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:45 Set A/D data flow result=40 15:32:45 Set A/D channel type result=40 15:32:45 Set A/D encoding result=40 15:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:45 Set channel filter=0.000000e+000 result=40 15:32:45 Config A/D Result=40 15:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:45 Get A/D filter: -9.255963e+061 result=40 15:32:45 Get A/D value=-858993460 result=40 15:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:45 Aux= 15:32:45 Message to Camera, serial 120960 queued 15:33:21 Received message from Master: op=PointingHead serial=120973 15:33:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:33:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:33:22 Point started: ret=0 15:33:22 point_skyscan result=0 15:33:22 Check angles 15:33:22 SkyScan query 15:33:23 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.445<-16563 Statuses=0009 0009 15:33:23 Msec=0 True Az=64.2 Ze=-68.445 Az status=0009 Ze status=0009 15:33:23 Check angles 15:33:23 SkyScan query 15:33:24 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.43<-17962 Statuses=0009 0009 15:33:24 Msec=750 True Az=81.51 Ze=-89.43 Az status=0009 Ze status=0009 15:33:24 Check angles 15:33:24 SkyScan query 15:33:25 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.385<-19359 Statuses=0009 0009 15:33:25 Msec=1500 True Az=99.09 Ze=-110.385 Az status=0009 Ze status=0009 15:33:25 Check angles 15:33:25 SkyScan query 15:33:25 SkyScan query done: ret=0 az=116.565<-7771 ze=-131.31<-20754 Statuses=0009 0009 15:33:25 Msec=2250 True Az=116.565 Ze=-131.31 Az status=0009 Ze status=0009 15:33:25 Check angles 15:33:25 SkyScan query 15:33:26 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 15:33:26 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 15:33:26 Check angles 15:33:26 SkyScan query 15:33:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:33:27 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:33:27 Message to Master queued w/err=0: serial=120973 error=0 15:33:32 Received message from Master: op=Filter serial=120974 15:33:32 Color wheel filter change from 0 to 0 15:33:32 FLIGetFilterPos err=0 currentPosition=0 15:33:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:33:32 Filter is already there-color wheel unchanged 15:33:32 Received message from Master: op=Shutter serial=120975 15:33:32 Shutter LASER close 15:33:32 Received message from Camera: op=State serial=120977 15:33:32 GetSingleValue result=40 Value=cccccccc 15:33:32 SkyScan query 15:33:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:33:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:33 Parameters OK 15:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:33 Set A/D data flow result=40 15:33:33 Set A/D channel type result=40 15:33:33 Set A/D encoding result=40 15:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:33 Set channel filter=0.000000e+000 result=40 15:33:33 Config A/D Result=40 15:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:33 Get A/D filter: -9.255963e+061 result=40 15:33:33 Get A/D value=-858993460 result=40 15:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:33 Parameters OK 15:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:33 Set A/D data flow result=40 15:33:33 Set A/D channel type result=40 15:33:33 Set A/D encoding result=40 15:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:33 Set channel filter=0.000000e+000 result=40 15:33:33 Config A/D Result=40 15:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:33 Get A/D filter: -9.255963e+061 result=40 15:33:33 Get A/D value=-858993460 result=40 15:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:33:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:33:33 Aux= 15:33:33 Message to Camera, serial 120977 queued 15:34:09 Received message from Master: op=PointingHead serial=120990 15:34:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:34:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:34:10 Point started: ret=0 15:34:10 point_skyscan result=0 15:34:11 Check angles 15:34:11 SkyScan query 15:34:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 15:34:11 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 15:34:11 Check angles 15:34:11 SkyScan query 15:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:34:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:34:12 Message to Master queued w/err=0: serial=120990 error=0 15:34:17 Received message from Master: op=Filter serial=120991 15:34:17 Color wheel filter change from 0 to 0 15:34:17 FLIGetFilterPos err=0 currentPosition=0 15:34:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:17 Filter is already there-color wheel unchanged 15:34:17 Received message from Master: op=Shutter serial=120992 15:34:17 Shutter LASER open 15:34:17 Received message from Camera: op=State serial=120994 15:34:17 GetSingleValue result=40 Value=cccccccc 15:34:17 SkyScan query 15:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:34:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:18 Parameters OK 15:34:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:18 Set A/D data flow result=40 15:34:18 Set A/D channel type result=40 15:34:18 Set A/D encoding result=40 15:34:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:18 Set channel filter=0.000000e+000 result=40 15:34:18 Config A/D Result=40 15:34:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:18 Get A/D filter: -9.255963e+061 result=40 15:34:18 Get A/D value=-858993460 result=40 15:34:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:18 Parameters OK 15:34:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:18 Set A/D data flow result=40 15:34:18 Set A/D channel type result=40 15:34:18 Set A/D encoding result=40 15:34:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:18 Set channel filter=0.000000e+000 result=40 15:34:18 Config A/D Result=40 15:34:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:18 Get A/D filter: -9.255963e+061 result=40 15:34:18 Get A/D value=-858993460 result=40 15:34:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:18 Aux= 15:34:18 Message to Camera, serial 120994 queued 15:34:26 Received message from Master: op=Shutter serial=121004 15:34:26 Shutter LASER close 15:34:27 Received message from Master: op=PointingHead serial=121008 15:34:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:34:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:34:27 Point started: ret=0 15:34:27 point_skyscan result=0 15:34:28 Check angles 15:34:28 SkyScan query 15:34:28 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.04<-21536 Statuses=0009 0009 15:34:28 Msec=0 True Az=136.155 Ze=-143.04 Az status=0009 Ze status=0009 15:34:29 Check angles 15:34:29 SkyScan query 15:34:29 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.07<-20138 Statuses=0009 0009 15:34:29 Msec=750 True Az=153.6 Ze=-122.07 Az status=0009 Ze status=0009 15:34:29 Check angles 15:34:29 SkyScan query 15:34:30 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.16<-18744 Statuses=0009 0009 15:34:30 Msec=1500 True Az=171.195 Ze=-101.16 Az status=0009 Ze status=0009 15:34:30 Check angles 15:34:30 SkyScan query 15:34:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.205<-17347 Statuses=0008 0009 15:34:31 Msec=2250 True Az=176.01 Ze=-80.205 Az status=0008 Ze status=0009 15:34:31 Check angles 15:34:31 SkyScan query 15:34:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 15:34:31 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 15:34:32 Check angles 15:34:32 SkyScan query 15:34:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:34:32 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:34:32 Message to Master queued w/err=0: serial=121008 error=0 15:34:37 Received message from Master: op=Filter serial=121009 15:34:37 Color wheel filter change from 0 to 0 15:34:37 FLIGetFilterPos err=0 currentPosition=0 15:34:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:37 Filter is already there-color wheel unchanged 15:34:37 Received message from Master: op=Shutter serial=121010 15:34:37 Shutter LASER close 15:34:38 Received message from Camera: op=State serial=121012 15:34:38 GetSingleValue result=40 Value=cccccccc 15:34:38 SkyScan query 15:34:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:34:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:38 Parameters OK 15:34:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:38 Set A/D data flow result=40 15:34:38 Set A/D channel type result=40 15:34:38 Set A/D encoding result=40 15:34:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:38 Set channel filter=0.000000e+000 result=40 15:34:38 Config A/D Result=40 15:34:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:38 Get A/D filter: -9.255963e+061 result=40 15:34:38 Get A/D value=-858993460 result=40 15:34:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:38 Parameters OK 15:34:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:38 Set A/D data flow result=40 15:34:38 Set A/D channel type result=40 15:34:38 Set A/D encoding result=40 15:34:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:38 Set channel filter=0.000000e+000 result=40 15:34:38 Config A/D Result=40 15:34:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:38 Get A/D filter: -9.255963e+061 result=40 15:34:38 Get A/D value=-858993460 result=40 15:34:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:38 Aux= 15:34:38 Message to Camera, serial 121012 queued 15:35:15 Received message from Master: op=PointingHead serial=121025 15:35:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:35:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:35:15 Point started: ret=0 15:35:15 point_skyscan result=0 15:35:16 Check angles 15:35:16 SkyScan query 15:35:17 SkyScan query done: ret=0 az=152.52<-10168 ze=-21.225<-13415 Statuses=0009 0009 15:35:17 Msec=0 True Az=152.52 Ze=-21.225 Az status=0009 Ze status=0009 15:35:17 Check angles 15:35:17 SkyScan query 15:35:17 SkyScan query done: ret=0 az=134.58<-8972 ze=0.15<-11990 Statuses=0009 0009 15:35:17 Msec=750 True Az=134.58 Ze=0.15 Az status=0009 Ze status=0009 15:35:18 Check angles 15:35:18 SkyScan query 15:35:18 SkyScan query done: ret=0 az=117.105<-7807 ze=21.12<-10592 Statuses=0009 0009 15:35:18 Msec=1500 True Az=117.105 Ze=21.12 Az status=0009 Ze status=0009 15:35:18 Check angles 15:35:18 SkyScan query 15:35:19 SkyScan query done: ret=0 az=99.33<-6622 ze=42.48<-9168 Statuses=0009 0009 15:35:19 Msec=2250 True Az=99.33 Ze=42.48 Az status=0009 Ze status=0009 15:35:19 Check angles 15:35:19 SkyScan query 15:35:20 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 15:35:20 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 15:35:20 Check angles 15:35:20 SkyScan query 15:35:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:35:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:35:20 Message to Master queued w/err=0: serial=121025 error=0 15:35:25 Received message from Master: op=Filter serial=121026 15:35:25 Color wheel filter change from 0 to 0 15:35:25 FLIGetFilterPos err=0 currentPosition=0 15:35:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:35:25 Filter is already there-color wheel unchanged 15:35:26 Received message from Master: op=Shutter serial=121027 15:35:26 Shutter LASER close 15:35:26 Received message from Camera: op=State serial=121029 15:35:26 GetSingleValue result=40 Value=cccccccc 15:35:26 SkyScan query 15:35:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:35:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:26 Parameters OK 15:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:26 Set A/D data flow result=40 15:35:26 Set A/D channel type result=40 15:35:26 Set A/D encoding result=40 15:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:26 Set channel filter=0.000000e+000 result=40 15:35:26 Config A/D Result=40 15:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:26 Get A/D filter: -9.255963e+061 result=40 15:35:26 Get A/D value=-858993460 result=40 15:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:26 Parameters OK 15:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:26 Set A/D data flow result=40 15:35:26 Set A/D channel type result=40 15:35:26 Set A/D encoding result=40 15:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:26 Set channel filter=0.000000e+000 result=40 15:35:26 Config A/D Result=40 15:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:26 Get A/D filter: -9.255963e+061 result=40 15:35:26 Get A/D value=-858993460 result=40 15:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:35:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:35:26 Aux= 15:35:26 Message to Camera, serial 121029 queued [UTC 2018-12-13 15:35:52] 15:36:03 Received message from Master: op=PointingHead serial=121042 15:36:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:36:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:36:03 Point started: ret=0 15:36:03 point_skyscan result=0 15:36:04 Check angles 15:36:04 SkyScan query 15:36:05 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 15:36:05 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 15:36:05 Check angles 15:36:05 SkyScan query 15:36:06 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 15:36:06 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 15:36:06 Check angles 15:36:06 SkyScan query 15:36:06 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 15:36:06 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 15:36:06 Check angles 15:36:06 SkyScan query 15:36:07 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 15:36:07 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 15:36:07 Check angles 15:36:07 SkyScan query 15:36:08 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:36:08 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:36:08 Check angles 15:36:08 SkyScan query 15:36:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:36:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:36:09 Message to Master queued w/err=0: serial=121042 error=0 15:36:14 Received message from Master: op=Filter serial=121043 15:36:14 Color wheel filter change from 0 to 0 15:36:14 FLIGetFilterPos err=0 currentPosition=0 15:36:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:14 Filter is already there-color wheel unchanged 15:36:14 Received message from Master: op=Shutter serial=121044 15:36:14 Shutter LASER close 15:36:14 Received message from Camera: op=State serial=121046 15:36:14 GetSingleValue result=40 Value=cccccccc 15:36:14 SkyScan query 15:36:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:36:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:14 Parameters OK 15:36:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:14 Set A/D data flow result=40 15:36:14 Set A/D channel type result=40 15:36:14 Set A/D encoding result=40 15:36:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:14 Set channel filter=0.000000e+000 result=40 15:36:14 Config A/D Result=40 15:36:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:14 Get A/D filter: -9.255963e+061 result=40 15:36:14 Get A/D value=-858993460 result=40 15:36:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:14 Parameters OK 15:36:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:14 Set A/D data flow result=40 15:36:14 Set A/D channel type result=40 15:36:14 Set A/D encoding result=40 15:36:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:14 Set channel filter=0.000000e+000 result=40 15:36:14 Config A/D Result=40 15:36:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:14 Get A/D filter: -9.255963e+061 result=40 15:36:14 Get A/D value=-858993460 result=40 15:36:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:14 Aux= 15:36:14 Message to Camera, serial 121046 queued 15:36:51 Received message from Master: op=PointingHead serial=121059 15:36:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:36:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:36:52 Point started: ret=0 15:36:52 point_skyscan result=0 15:36:52 Check angles 15:36:52 SkyScan query 15:36:53 SkyScan query done: ret=0 az=153.24<-10216 ze=8.955<-11403 Statuses=0009 0009 15:36:53 Msec=0 True Az=153.24 Ze=8.955 Az status=0009 Ze status=0009 15:36:53 Check angles 15:36:53 SkyScan query 15:36:54 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.435<-12829 Statuses=0009 0009 15:36:54 Msec=750 True Az=135.405 Ze=-12.435 Az status=0009 Ze status=0009 15:36:54 Check angles 15:36:54 SkyScan query 15:36:54 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.375<-14225 Statuses=0009 0009 15:36:54 Msec=1500 True Az=117.78 Ze=-33.375 Az status=0009 Ze status=0009 15:36:55 Check angles 15:36:55 SkyScan query 15:36:55 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.54<-15436 Statuses=0009 0009 15:36:55 Msec=2250 True Az=100.38 Ze=-51.54 Az status=0009 Ze status=0009 15:36:55 Check angles 15:36:55 SkyScan query 15:36:56 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:36:56 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:36:56 Check angles 15:36:56 SkyScan query 15:36:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:36:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:36:57 Message to Master queued w/err=0: serial=121059 error=0 15:37:02 Received message from Master: op=Filter serial=121060 15:37:02 Color wheel filter change from 0 to 0 15:37:02 FLIGetFilterPos err=0 currentPosition=0 15:37:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:37:02 Filter is already there-color wheel unchanged 15:37:02 Received message from Master: op=Shutter serial=121061 15:37:02 Shutter LASER close 15:37:02 Received message from Camera: op=State serial=121063 15:37:02 GetSingleValue result=40 Value=cccccccc 15:37:02 SkyScan query 15:37:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:37:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:02 Parameters OK 15:37:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:02 Set A/D data flow result=40 15:37:02 Set A/D channel type result=40 15:37:02 Set A/D encoding result=40 15:37:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:02 Set channel filter=0.000000e+000 result=40 15:37:02 Config A/D Result=40 15:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:02 Get A/D filter: -9.255963e+061 result=40 15:37:02 Get A/D value=-858993460 result=40 15:37:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:02 Parameters OK 15:37:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:02 Set A/D data flow result=40 15:37:02 Set A/D channel type result=40 15:37:02 Set A/D encoding result=40 15:37:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:02 Set channel filter=0.000000e+000 result=40 15:37:02 Config A/D Result=40 15:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:02 Get A/D filter: -9.255963e+061 result=40 15:37:02 Get A/D value=-858993460 result=40 15:37:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:37:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:37:02 Aux= 15:37:02 Message to Camera, serial 121063 queued 15:37:39 Received message from Master: op=PointingHead serial=121076 15:37:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:37:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:37:40 Point started: ret=0 15:37:40 point_skyscan result=0 15:37:40 Check angles 15:37:40 SkyScan query 15:37:41 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.27<-17418 Statuses=0009 0009 15:37:41 Msec=0 True Az=109.005 Ze=-81.27 Az status=0009 Ze status=0009 15:37:41 Check angles 15:37:41 SkyScan query 15:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 15:37:42 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 15:37:42 Check angles 15:37:42 SkyScan query 15:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.065<-20271 Statuses=0008 0009 15:37:42 Msec=1500 True Az=112.995 Ze=-124.065 Az status=0008 Ze status=0009 15:37:43 Check angles 15:37:43 SkyScan query 15:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.44<-21696 Statuses=0008 0009 15:37:43 Msec=2250 True Az=112.995 Ze=-145.44 Az status=0008 Ze status=0009 15:37:43 Check angles 15:37:43 SkyScan query 15:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.41<-23094 Statuses=0008 0009 15:37:44 Msec=3000 True Az=112.995 Ze=-166.41 Az status=0008 Ze status=0009 15:37:44 Check angles 15:37:44 SkyScan query 15:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:37:45 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:37:45 Message to Master queued w/err=0: serial=121076 error=0 15:37:50 Received message from Master: op=Filter serial=121077 15:37:50 Color wheel filter change from 0 to 0 15:37:50 FLIGetFilterPos err=0 currentPosition=0 15:37:50 FLIGetStepsRemaining err=0 RemainingSteps=0 15:37:50 Filter is already there-color wheel unchanged 15:37:50 Received message from Master: op=Shutter serial=121078 15:37:50 Shutter LASER open 15:37:50 Received message from Camera: op=State serial=121080 15:37:50 GetSingleValue result=40 Value=cccccccc 15:37:50 SkyScan query 15:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:37:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:51 Parameters OK 15:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:51 Set A/D data flow result=40 15:37:51 Set A/D channel type result=40 15:37:51 Set A/D encoding result=40 15:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:51 Set channel filter=0.000000e+000 result=40 15:37:51 Config A/D Result=40 15:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:51 Get A/D filter: -9.255963e+061 result=40 15:37:51 Get A/D value=-858993460 result=40 15:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:51 Parameters OK 15:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:51 Set A/D data flow result=40 15:37:51 Set A/D channel type result=40 15:37:51 Set A/D encoding result=40 15:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:51 Set channel filter=0.000000e+000 result=40 15:37:51 Config A/D Result=40 15:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:51 Get A/D filter: -9.255963e+061 result=40 15:37:51 Get A/D value=-858993460 result=40 15:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:37:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:37:51 Aux= 15:37:51 Message to Camera, serial 121080 queued 15:37:59 Received message from Master: op=Shutter serial=121090 15:37:59 Shutter LASER close 15:38:00 Received message from Master: op=PointingHead serial=121094 15:38:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:38:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:38:00 Point started: ret=0 15:38:00 point_skyscan result=0 15:38:01 Check angles 15:38:01 SkyScan query 15:38:01 SkyScan query done: ret=0 az=89.82<-5988 ze=157.23<-1518 Statuses=0009 0009 15:38:01 Msec=0 True Az=89.82 Ze=157.23 Az status=0009 Ze status=0009 15:38:01 Check angles 15:38:01 SkyScan query 15:38:02 SkyScan query done: ret=0 az=71.985<-4799 ze=135.795<-2947 Statuses=0009 0009 15:38:02 Msec=750 True Az=71.985 Ze=135.795 Az status=0009 Ze status=0009 15:38:02 Check angles 15:38:02 SkyScan query 15:38:03 SkyScan query done: ret=0 az=54.72<-3648 ze=114.825<-4345 Statuses=0009 0009 15:38:03 Msec=1500 True Az=54.72 Ze=114.825 Az status=0009 Ze status=0009 15:38:03 Check angles 15:38:03 SkyScan query 15:38:03 SkyScan query done: ret=0 az=40.935<-2729 ze=93.885<-5741 Statuses=0009 0009 15:38:03 Msec=2250 True Az=40.935 Ze=93.885 Az status=0009 Ze status=0009 15:38:04 Check angles 15:38:04 SkyScan query 15:38:04 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 15:38:04 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 15:38:04 Check angles 15:38:04 SkyScan query 15:38:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 15:38:05 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 15:38:05 Check angles 15:38:05 SkyScan query 15:38:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:38:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:38:06 Message to Master queued w/err=0: serial=121094 error=0 15:38:11 Received message from Master: op=Filter serial=121095 15:38:11 Color wheel filter change from 0 to 0 15:38:11 FLIGetFilterPos err=0 currentPosition=0 15:38:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:11 Filter is already there-color wheel unchanged 15:38:11 Received message from Master: op=Shutter serial=121096 15:38:11 Shutter LASER close 15:38:11 Received message from Camera: op=State serial=121098 15:38:11 GetSingleValue result=40 Value=cccccccc 15:38:11 SkyScan query 15:38:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:38:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:12 Parameters OK 15:38:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:12 Set A/D data flow result=40 15:38:12 Set A/D channel type result=40 15:38:12 Set A/D encoding result=40 15:38:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:12 Set channel filter=0.000000e+000 result=40 15:38:12 Config A/D Result=40 15:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:12 Get A/D filter: -9.255963e+061 result=40 15:38:12 Get A/D value=-858993460 result=40 15:38:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:12 Parameters OK 15:38:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:12 Set A/D data flow result=40 15:38:12 Set A/D channel type result=40 15:38:12 Set A/D encoding result=40 15:38:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:12 Set channel filter=0.000000e+000 result=40 15:38:12 Config A/D Result=40 15:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:12 Get A/D filter: -9.255963e+061 result=40 15:38:12 Get A/D value=-858993460 result=40 15:38:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:12 Aux= 15:38:12 Message to Camera, serial 121098 queued 15:38:48 Received message from Master: op=PointingHead serial=121111 15:38:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:38:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:38:49 Point started: ret=0 15:38:49 point_skyscan result=0 15:38:50 Check angles 15:38:50 SkyScan query 15:38:50 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 15:38:50 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 15:38:50 Check angles 15:38:50 SkyScan query 15:38:51 SkyScan query done: ret=0 az=81.825<-5455 ze=66.495<-7567 Statuses=0009 0008 15:38:51 Msec=750 True Az=81.825 Ze=66.495 Az status=0009 Ze status=0008 15:38:51 Check angles 15:38:51 SkyScan query 15:38:52 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 15:38:52 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 15:38:52 Check angles 15:38:52 SkyScan query 15:38:52 SkyScan query done: ret=0 az=117.375<-7825 ze=66.495<-7567 Statuses=0009 0008 15:38:52 Msec=2250 True Az=117.375 Ze=66.495 Az status=0009 Ze status=0008 15:38:53 Check angles 15:38:53 SkyScan query 15:38:53 SkyScan query done: ret=0 az=134.745<-8983 ze=66.495<-7567 Statuses=0009 0008 15:38:53 Msec=3000 True Az=134.745 Ze=66.495 Az status=0009 Ze status=0008 15:38:53 Check angles 15:38:53 SkyScan query 15:38:54 SkyScan query done: ret=0 az=152.43<-10162 ze=66.495<-7567 Statuses=0009 0008 15:38:54 Msec=3750 True Az=152.43 Ze=66.495 Az status=0009 Ze status=0008 15:38:54 Check angles 15:38:54 SkyScan query 15:38:55 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:38:55 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:38:55 Message to Master queued w/err=0: serial=121111 error=0 15:39:00 Received message from Master: op=Filter serial=121112 15:39:00 Color wheel filter change from 0 to 0 15:39:00 FLIGetFilterPos err=0 currentPosition=0 15:39:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:00 Filter is already there-color wheel unchanged 15:39:00 Received message from Master: op=Shutter serial=121113 15:39:00 Shutter LASER close 15:39:00 Received message from Camera: op=State serial=121115 15:39:00 GetSingleValue result=40 Value=cccccccc 15:39:00 SkyScan query 15:39:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:39:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:00 Parameters OK 15:39:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:00 Set A/D data flow result=40 15:39:00 Set A/D channel type result=40 15:39:00 Set A/D encoding result=40 15:39:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:00 Set channel filter=0.000000e+000 result=40 15:39:00 Config A/D Result=40 15:39:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:00 Get A/D filter: -9.255963e+061 result=40 15:39:00 Get A/D value=-858993460 result=40 15:39:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:00 Parameters OK 15:39:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:00 Set A/D data flow result=40 15:39:00 Set A/D channel type result=40 15:39:00 Set A/D encoding result=40 15:39:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:00 Set channel filter=0.000000e+000 result=40 15:39:00 Config A/D Result=40 15:39:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:00 Get A/D filter: -9.255963e+061 result=40 15:39:00 Get A/D value=-858993460 result=40 15:39:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:00 Aux= 15:39:00 Message to Camera, serial 121115 queued 15:39:37 Received message from Master: op=PointingHead serial=121128 15:39:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:39:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:39:38 Point started: ret=0 15:39:38 point_skyscan result=0 15:39:38 Check angles 15:39:38 SkyScan query 15:39:39 SkyScan query done: ret=0 az=135.195<-9013 ze=36.885<-9541 Statuses=0009 0009 15:39:39 Msec=0 True Az=135.195 Ze=36.885 Az status=0009 Ze status=0009 15:39:39 Check angles 15:39:39 SkyScan query 15:39:40 SkyScan query done: ret=0 az=117.705<-7847 ze=15.93<-10938 Statuses=0009 0009 15:39:40 Msec=750 True Az=117.705 Ze=15.93 Az status=0009 Ze status=0009 15:39:40 Check angles 15:39:40 SkyScan query 15:39:41 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.445<-12363 Statuses=0009 0009 15:39:41 Msec=1500 True Az=99.885 Ze=-5.445 Az status=0009 Ze status=0009 15:39:41 Check angles 15:39:41 SkyScan query 15:39:41 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.4<-13760 Statuses=0009 0009 15:39:41 Msec=2250 True Az=82.425 Ze=-26.4 Az status=0009 Ze status=0009 15:39:41 Check angles 15:39:41 SkyScan query 15:39:42 SkyScan query done: ret=0 az=64.905<-4327 ze=-38.565<-14571 Statuses=0009 0008 15:39:42 Msec=3000 True Az=64.905 Ze=-38.565 Az status=0009 Ze status=0008 15:39:42 Check angles 15:39:42 SkyScan query 15:39:43 SkyScan query done: ret=0 az=47.46<-3164 ze=-38.535<-14569 Statuses=0009 0008 15:39:43 Msec=3750 True Az=47.46 Ze=-38.535 Az status=0009 Ze status=0008 15:39:43 Check angles 15:39:43 SkyScan query 15:39:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:39:44 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:39:44 Message to Master queued w/err=0: serial=121128 error=0 15:39:49 Received message from Master: op=Filter serial=121129 15:39:49 Color wheel filter change from 0 to 0 15:39:49 FLIGetFilterPos err=0 currentPosition=0 15:39:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:49 Filter is already there-color wheel unchanged 15:39:49 Received message from Master: op=Shutter serial=121130 15:39:49 Shutter LASER close 15:39:49 Received message from Camera: op=State serial=121132 15:39:49 GetSingleValue result=40 Value=cccccccc 15:39:49 SkyScan query 15:39:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:39:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:49 Parameters OK 15:39:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:49 Set A/D data flow result=40 15:39:49 Set A/D channel type result=40 15:39:49 Set A/D encoding result=40 15:39:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:49 Set channel filter=0.000000e+000 result=40 15:39:49 Config A/D Result=40 15:39:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:49 Get A/D filter: -9.255963e+061 result=40 15:39:49 Get A/D value=-858993460 result=40 15:39:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:49 Parameters OK 15:39:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:49 Set A/D data flow result=40 15:39:49 Set A/D channel type result=40 15:39:49 Set A/D encoding result=40 15:39:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:49 Set channel filter=0.000000e+000 result=40 15:39:49 Config A/D Result=40 15:39:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:49 Get A/D filter: -9.255963e+061 result=40 15:39:49 Get A/D value=-858993460 result=40 15:39:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:49 Aux= 15:39:49 Message to Camera, serial 121132 queued 15:40:26 Received message from Master: op=PointingHead serial=121145 15:40:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:40:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:40:26 Point started: ret=0 15:40:26 point_skyscan result=0 15:40:27 Check angles 15:40:27 SkyScan query 15:40:28 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.115<-16541 Statuses=0009 0009 15:40:28 Msec=0 True Az=63.825 Ze=-68.115 Az status=0009 Ze status=0009 15:40:28 Check angles 15:40:28 SkyScan query 15:40:29 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.55<-17970 Statuses=0009 0009 15:40:29 Msec=750 True Az=81.585 Ze=-89.55 Az status=0009 Ze status=0009 15:40:29 Check angles 15:40:29 SkyScan query 15:40:29 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.49<-19366 Statuses=0009 0009 15:40:29 Msec=1500 True Az=99.09 Ze=-110.49 Az status=0009 Ze status=0009 15:40:29 Check angles 15:40:29 SkyScan query 15:40:30 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.43<-20762 Statuses=0009 0009 15:40:30 Msec=2250 True Az=116.715 Ze=-131.43 Az status=0009 Ze status=0009 15:40:30 Check angles 15:40:30 SkyScan query 15:40:31 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 15:40:31 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 15:40:31 Check angles 15:40:31 SkyScan query 15:40:32 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:40:32 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:40:32 Message to Master queued w/err=0: serial=121145 error=0 15:40:37 Received message from Master: op=Filter serial=121146 15:40:37 Color wheel filter change from 0 to 0 15:40:37 FLIGetFilterPos err=0 currentPosition=0 15:40:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:40:37 Filter is already there-color wheel unchanged 15:40:37 Received message from Master: op=Shutter serial=121147 15:40:37 Shutter LASER close 15:40:37 Received message from Camera: op=State serial=121149 15:40:37 GetSingleValue result=40 Value=cccccccc 15:40:37 SkyScan query 15:40:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:40:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:37 Parameters OK 15:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:37 Set A/D data flow result=40 15:40:37 Set A/D channel type result=40 15:40:37 Set A/D encoding result=40 15:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:37 Set channel filter=0.000000e+000 result=40 15:40:37 Config A/D Result=40 15:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:37 Get A/D filter: -9.255963e+061 result=40 15:40:37 Get A/D value=-858993460 result=40 15:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:37 Parameters OK 15:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:37 Set A/D data flow result=40 15:40:37 Set A/D channel type result=40 15:40:37 Set A/D encoding result=40 15:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:37 Set channel filter=0.000000e+000 result=40 15:40:37 Config A/D Result=40 15:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:37 Get A/D filter: -9.255963e+061 result=40 15:40:37 Get A/D value=-858993460 result=40 15:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:40:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:40:37 Aux= 15:40:37 Message to Camera, serial 121149 queued 15:41:14 Received message from Master: op=PointingHead serial=121162 15:41:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:41:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:41:15 Point started: ret=0 15:41:15 point_skyscan result=0 15:41:15 Check angles 15:41:15 SkyScan query 15:41:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 15:41:16 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 15:41:16 Check angles 15:41:16 SkyScan query 15:41:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:41:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:41:17 Message to Master queued w/err=0: serial=121162 error=0 15:41:22 Received message from Master: op=Filter serial=121163 15:41:22 Color wheel filter change from 0 to 0 15:41:22 FLIGetFilterPos err=0 currentPosition=0 15:41:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:22 Filter is already there-color wheel unchanged 15:41:22 Received message from Master: op=Shutter serial=121164 15:41:22 Shutter LASER open 15:41:22 Received message from Camera: op=State serial=121166 15:41:22 GetSingleValue result=40 Value=cccccccc 15:41:22 SkyScan query 15:41:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:41:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:23 Parameters OK 15:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:23 Set A/D data flow result=40 15:41:23 Set A/D channel type result=40 15:41:23 Set A/D encoding result=40 15:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:23 Set channel filter=0.000000e+000 result=40 15:41:23 Config A/D Result=40 15:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:23 Get A/D filter: -9.255963e+061 result=40 15:41:23 Get A/D value=-858993460 result=40 15:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:23 Parameters OK 15:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:23 Set A/D data flow result=40 15:41:23 Set A/D channel type result=40 15:41:23 Set A/D encoding result=40 15:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:23 Set channel filter=0.000000e+000 result=40 15:41:23 Config A/D Result=40 15:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:23 Get A/D filter: -9.255963e+061 result=40 15:41:23 Get A/D value=-858993460 result=40 15:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:23 Aux= 15:41:23 Message to Camera, serial 121166 queued 15:41:30 Received message from Master: op=Shutter serial=121175 15:41:30 Shutter LASER close 15:41:31 Received message from Master: op=PointingHead serial=121179 15:41:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:41:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:41:31 Point started: ret=0 15:41:31 point_skyscan result=0 15:41:32 Check angles 15:41:32 SkyScan query 15:41:32 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.4<-21560 Statuses=0009 0009 15:41:32 Msec=0 True Az=135.825 Ze=-143.4 Az status=0009 Ze status=0009 15:41:33 Check angles 15:41:33 SkyScan query 15:41:33 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.965<-20131 Statuses=0009 0009 15:41:33 Msec=750 True Az=153.69 Ze=-121.965 Az status=0009 Ze status=0009 15:41:33 Check angles 15:41:33 SkyScan query 15:41:34 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.545<-18703 Statuses=0009 0009 15:41:34 Msec=1500 True Az=171.57 Ze=-100.545 Az status=0009 Ze status=0009 15:41:34 Check angles 15:41:34 SkyScan query 15:41:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 15:41:35 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 15:41:35 Check angles 15:41:35 SkyScan query 15:41:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 15:41:35 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 15:41:36 Check angles 15:41:36 SkyScan query 15:41:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:41:36 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:41:36 Message to Master queued w/err=0: serial=121179 error=0 15:41:41 Received message from Master: op=Filter serial=121180 15:41:41 Color wheel filter change from 0 to 0 15:41:41 FLIGetFilterPos err=0 currentPosition=0 15:41:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:41 Filter is already there-color wheel unchanged 15:41:41 Received message from Master: op=Shutter serial=121181 15:41:41 Shutter LASER close 15:41:41 Received message from Camera: op=State serial=121183 15:41:41 GetSingleValue result=40 Value=cccccccc 15:41:41 SkyScan query 15:41:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:41:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:42 Parameters OK 15:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:42 Set A/D data flow result=40 15:41:42 Set A/D channel type result=40 15:41:42 Set A/D encoding result=40 15:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:42 Set channel filter=0.000000e+000 result=40 15:41:42 Config A/D Result=40 15:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:42 Get A/D filter: -9.255963e+061 result=40 15:41:42 Get A/D value=-858993460 result=40 15:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:42 Parameters OK 15:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:42 Set A/D data flow result=40 15:41:42 Set A/D channel type result=40 15:41:42 Set A/D encoding result=40 15:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:42 Set channel filter=0.000000e+000 result=40 15:41:42 Config A/D Result=40 15:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:42 Get A/D filter: -9.255963e+061 result=40 15:41:42 Get A/D value=-858993460 result=40 15:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:42 Aux= 15:41:42 Message to Camera, serial 121183 queued 15:42:19 Received message from Master: op=PointingHead serial=121196 15:42:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:42:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:42:19 Point started: ret=0 15:42:19 point_skyscan result=0 15:42:20 Check angles 15:42:20 SkyScan query 15:42:21 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.05<-13470 Statuses=0009 0009 15:42:21 Msec=0 True Az=153.225 Ze=-22.05 Az status=0009 Ze status=0009 15:42:21 Check angles 15:42:21 SkyScan query 15:42:21 SkyScan query done: ret=0 az=135.81<-9054 ze=-1.065<-12071 Statuses=0009 0009 15:42:21 Msec=750 True Az=135.81 Ze=-1.065 Az status=0009 Ze status=0009 15:42:21 Check angles 15:42:21 SkyScan query 15:42:22 SkyScan query done: ret=0 az=118.245<-7883 ze=19.875<-10675 Statuses=0009 0009 15:42:22 Msec=1500 True Az=118.245 Ze=19.875 Az status=0009 Ze status=0009 15:42:22 Check angles 15:42:22 SkyScan query 15:42:23 SkyScan query done: ret=0 az=100.875<-6725 ze=40.83<-9278 Statuses=0009 0009 15:42:23 Msec=2250 True Az=100.875 Ze=40.83 Az status=0009 Ze status=0009 15:42:23 Check angles 15:42:23 SkyScan query 15:42:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:42:24 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:42:24 Check angles 15:42:24 SkyScan query 15:42:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:42:24 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:42:24 Message to Master queued w/err=0: serial=121196 error=0 15:42:29 Received message from Master: op=Filter serial=121197 15:42:29 Color wheel filter change from 0 to 0 15:42:29 FLIGetFilterPos err=0 currentPosition=0 15:42:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:42:29 Filter is already there-color wheel unchanged 15:42:29 Received message from Master: op=Shutter serial=121198 15:42:29 Shutter LASER close 15:42:29 Received message from Camera: op=State serial=121200 15:42:29 GetSingleValue result=40 Value=cccccccc 15:42:29 SkyScan query 15:42:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:42:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:30 Parameters OK 15:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:30 Set A/D data flow result=40 15:42:30 Set A/D channel type result=40 15:42:30 Set A/D encoding result=40 15:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:30 Set channel filter=0.000000e+000 result=40 15:42:30 Config A/D Result=40 15:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:30 Get A/D filter: -9.255963e+061 result=40 15:42:30 Get A/D value=-858993460 result=40 15:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:30 Parameters OK 15:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:30 Set A/D data flow result=40 15:42:30 Set A/D channel type result=40 15:42:30 Set A/D encoding result=40 15:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:30 Set channel filter=0.000000e+000 result=40 15:42:30 Config A/D Result=40 15:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:30 Get A/D filter: -9.255963e+061 result=40 15:42:30 Get A/D value=-858993460 result=40 15:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:42:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:42:30 Aux= 15:42:30 Message to Camera, serial 121200 queued 15:43:07 Received message from Master: op=PointingHead serial=121213 15:43:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:43:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:43:07 Point started: ret=0 15:43:07 point_skyscan result=0 15:43:08 Check angles 15:43:08 SkyScan query 15:43:09 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 15:43:09 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 15:43:09 Check angles 15:43:09 SkyScan query 15:43:09 SkyScan query done: ret=0 az=126.96<-8464 ze=38.505<-9433 Statuses=0009 0008 15:43:09 Msec=750 True Az=126.96 Ze=38.505 Az status=0009 Ze status=0008 15:43:10 Check angles 15:43:10 SkyScan query 15:43:10 SkyScan query done: ret=0 az=144.84<-9656 ze=38.505<-9433 Statuses=0009 0008 15:43:10 Msec=1500 True Az=144.84 Ze=38.505 Az status=0009 Ze status=0008 15:43:10 Check angles 15:43:10 SkyScan query 15:43:11 SkyScan query done: ret=0 az=162.24<-10816 ze=38.505<-9433 Statuses=0009 0008 15:43:11 Msec=2250 True Az=162.24 Ze=38.505 Az status=0009 Ze status=0008 15:43:11 Check angles 15:43:11 SkyScan query 15:43:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:43:12 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:43:12 Check angles 15:43:12 SkyScan query 15:43:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:43:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:43:12 Message to Master queued w/err=0: serial=121213 error=0 15:43:17 Received message from Master: op=Filter serial=121214 15:43:17 Color wheel filter change from 0 to 0 15:43:17 FLIGetFilterPos err=0 currentPosition=0 15:43:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:43:17 Filter is already there-color wheel unchanged 15:43:18 Received message from Master: op=Shutter serial=121215 15:43:18 Shutter LASER close 15:43:18 Received message from Camera: op=State serial=121217 15:43:18 GetSingleValue result=40 Value=cccccccc 15:43:18 SkyScan query 15:43:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:43:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:18 Parameters OK 15:43:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:18 Set A/D data flow result=40 15:43:18 Set A/D channel type result=40 15:43:18 Set A/D encoding result=40 15:43:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:18 Set channel filter=0.000000e+000 result=40 15:43:18 Config A/D Result=40 15:43:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:18 Get A/D filter: -9.255963e+061 result=40 15:43:18 Get A/D value=-858993460 result=40 15:43:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:18 Parameters OK 15:43:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:18 Set A/D data flow result=40 15:43:18 Set A/D channel type result=40 15:43:18 Set A/D encoding result=40 15:43:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:18 Set channel filter=0.000000e+000 result=40 15:43:18 Config A/D Result=40 15:43:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:18 Get A/D filter: -9.255963e+061 result=40 15:43:18 Get A/D value=-858993460 result=40 15:43:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:43:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:43:18 Aux= 15:43:18 Message to Camera, serial 121217 queued 15:43:55 Received message from Master: op=PointingHead serial=121230 15:43:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:43:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:43:55 Point started: ret=0 15:43:55 point_skyscan result=0 15:43:56 Check angles 15:43:56 SkyScan query 15:43:57 SkyScan query done: ret=0 az=152.58<-10172 ze=8.25<-11450 Statuses=0009 0009 15:43:57 Msec=0 True Az=152.58 Ze=8.25 Az status=0009 Ze status=0009 15:43:57 Check angles 15:43:57 SkyScan query 15:43:57 SkyScan query done: ret=0 az=134.61<-8974 ze=-13.095<-12873 Statuses=0009 0009 15:43:57 Msec=750 True Az=134.61 Ze=-13.095 Az status=0009 Ze status=0009 15:43:58 Check angles 15:43:58 SkyScan query 15:43:58 SkyScan query done: ret=0 az=117.12<-7808 ze=-34.11<-14274 Statuses=0009 0009 15:43:58 Msec=1500 True Az=117.12 Ze=-34.11 Az status=0009 Ze status=0009 15:43:58 Check angles 15:43:58 SkyScan query 15:43:59 SkyScan query done: ret=0 az=99.84<-6656 ze=-51.57<-15438 Statuses=0009 0009 15:43:59 Msec=2250 True Az=99.84 Ze=-51.57 Az status=0009 Ze status=0009 15:43:59 Check angles 15:43:59 SkyScan query 15:44:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 15:44:00 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 15:44:00 Check angles 15:44:00 SkyScan query 15:44:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:44:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:44:00 Message to Master queued w/err=0: serial=121230 error=0 15:44:05 Received message from Master: op=Filter serial=121231 15:44:05 Color wheel filter change from 0 to 0 15:44:05 FLIGetFilterPos err=0 currentPosition=0 15:44:05 FLIGetStepsRemaining err=0 RemainingSteps=0 15:44:05 Filter is already there-color wheel unchanged 15:44:06 Received message from Master: op=Shutter serial=121232 15:44:06 Shutter LASER close 15:44:06 Received message from Camera: op=State serial=121234 15:44:06 GetSingleValue result=40 Value=cccccccc 15:44:06 SkyScan query 15:44:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:44:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:06 Parameters OK 15:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:06 Set A/D data flow result=40 15:44:06 Set A/D channel type result=40 15:44:06 Set A/D encoding result=40 15:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:06 Set channel filter=0.000000e+000 result=40 15:44:06 Config A/D Result=40 15:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:06 Get A/D filter: -9.255963e+061 result=40 15:44:06 Get A/D value=-858993460 result=40 15:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:06 Parameters OK 15:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:06 Set A/D data flow result=40 15:44:06 Set A/D channel type result=40 15:44:06 Set A/D encoding result=40 15:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:06 Set channel filter=0.000000e+000 result=40 15:44:06 Config A/D Result=40 15:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:06 Get A/D filter: -9.255963e+061 result=40 15:44:06 Get A/D value=-858993460 result=40 15:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:06 Aux= 15:44:06 Message to Camera, serial 121234 queued 15:44:43 Received message from Master: op=PointingHead serial=121247 15:44:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:44:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:44:43 Point started: ret=0 15:44:43 point_skyscan result=0 15:44:44 Check angles 15:44:44 SkyScan query 15:44:45 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.315<-17421 Statuses=0009 0009 15:44:45 Msec=0 True Az=109.14 Ze=-81.315 Az status=0009 Ze status=0009 15:44:45 Check angles 15:44:45 SkyScan query 15:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 15:44:45 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 15:44:46 Check angles 15:44:46 SkyScan query 15:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 15:44:46 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 15:44:46 Check angles 15:44:46 SkyScan query 15:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.225<-21615 Statuses=0008 0009 15:44:47 Msec=2250 True Az=112.995 Ze=-144.225 Az status=0008 Ze status=0009 15:44:47 Check angles 15:44:47 SkyScan query 15:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.165<-23011 Statuses=0008 0009 15:44:48 Msec=3000 True Az=112.995 Ze=-165.165 Az status=0008 Ze status=0009 15:44:48 Check angles 15:44:48 SkyScan query 15:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:44:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:44:48 Message to Master queued w/err=0: serial=121247 error=0 15:44:53 Received message from Master: op=Filter serial=121248 15:44:53 Color wheel filter change from 0 to 0 15:44:53 FLIGetFilterPos err=0 currentPosition=0 15:44:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:44:53 Filter is already there-color wheel unchanged 15:44:54 Received message from Master: op=Shutter serial=121249 15:44:54 Shutter LASER open 15:44:54 Received message from Camera: op=State serial=121251 15:44:54 GetSingleValue result=40 Value=cccccccc 15:44:54 SkyScan query 15:44:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:44:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:54 Parameters OK 15:44:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:54 Set A/D data flow result=40 15:44:54 Set A/D channel type result=40 15:44:54 Set A/D encoding result=40 15:44:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:54 Set channel filter=0.000000e+000 result=40 15:44:54 Config A/D Result=40 15:44:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:54 Get A/D filter: -9.255963e+061 result=40 15:44:54 Get A/D value=-858993460 result=40 15:44:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:54 Parameters OK 15:44:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:54 Set A/D data flow result=40 15:44:54 Set A/D channel type result=40 15:44:54 Set A/D encoding result=40 15:44:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:54 Set channel filter=0.000000e+000 result=40 15:44:54 Config A/D Result=40 15:44:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:54 Get A/D filter: -9.255963e+061 result=40 15:44:54 Get A/D value=-858993460 result=40 15:44:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:54 Aux= 15:44:54 Message to Camera, serial 121251 queued 15:45:03 Received message from Master: op=Shutter serial=121261 15:45:03 Shutter LASER close 15:45:03 Received message from Master: op=PointingHead serial=121265 15:45:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:45:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:45:04 Point started: ret=0 15:45:04 point_skyscan result=0 15:45:04 Check angles 15:45:04 SkyScan query 15:45:05 SkyScan query done: ret=0 az=89.865<-5991 ze=157.26<-1516 Statuses=0009 0009 15:45:05 Msec=0 True Az=89.865 Ze=157.26 Az status=0009 Ze status=0009 15:45:05 Check angles 15:45:05 SkyScan query 15:45:06 SkyScan query done: ret=0 az=72.045<-4803 ze=135.87<-2942 Statuses=0009 0009 15:45:06 Msec=750 True Az=72.045 Ze=135.87 Az status=0009 Ze status=0009 15:45:06 Check angles 15:45:06 SkyScan query 15:45:06 SkyScan query done: ret=0 az=54.735<-3649 ze=114.885<-4341 Statuses=0009 0009 15:45:06 Msec=1500 True Az=54.735 Ze=114.885 Az status=0009 Ze status=0009 15:45:07 Check angles 15:45:07 SkyScan query 15:45:07 SkyScan query done: ret=0 az=40.95<-2730 ze=93.945<-5737 Statuses=0009 0009 15:45:07 Msec=2250 True Az=40.95 Ze=93.945 Az status=0009 Ze status=0009 15:45:07 Check angles 15:45:07 SkyScan query 15:45:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 15:45:08 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 15:45:08 Check angles 15:45:08 SkyScan query 15:45:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 15:45:09 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 15:45:09 Check angles 15:45:09 SkyScan query 15:45:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:45:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:45:10 Message to Master queued w/err=0: serial=121265 error=0 15:45:15 Received message from Master: op=Filter serial=121266 15:45:15 Color wheel filter change from 0 to 0 15:45:15 FLIGetFilterPos err=0 currentPosition=0 15:45:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:15 Filter is already there-color wheel unchanged 15:45:15 Received message from Master: op=Shutter serial=121267 15:45:15 Shutter LASER close 15:45:15 Received message from Camera: op=State serial=121269 15:45:15 GetSingleValue result=40 Value=cccccccc 15:45:15 SkyScan query 15:45:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:45:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:15 Parameters OK 15:45:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:15 Set A/D data flow result=40 15:45:15 Set A/D channel type result=40 15:45:15 Set A/D encoding result=40 15:45:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:15 Set channel filter=0.000000e+000 result=40 15:45:15 Config A/D Result=40 15:45:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:15 Get A/D filter: -9.255963e+061 result=40 15:45:15 Get A/D value=-858993460 result=40 15:45:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:15 Parameters OK 15:45:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:15 Set A/D data flow result=40 15:45:15 Set A/D channel type result=40 15:45:15 Set A/D encoding result=40 15:45:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:15 Set channel filter=0.000000e+000 result=40 15:45:15 Config A/D Result=40 15:45:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:15 Get A/D filter: -9.255963e+061 result=40 15:45:15 Get A/D value=-858993460 result=40 15:45:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:15 Aux= [UTC 2018-12-13 15:45:15] 15:45:15 Message to Camera, serial 121269 queued 15:45:27 Received message from Master: op=Identify serial=121270 15:45:52 Received message from Master: op=PointingHead serial=121285 15:45:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:45:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:45:53 Point started: ret=0 15:45:53 point_skyscan result=0 15:45:53 Check angles 15:45:53 SkyScan query 15:45:54 SkyScan query done: ret=0 az=64.095<-4273 ze=66.555<-7563 Statuses=0009 0008 15:45:54 Msec=0 True Az=64.095 Ze=66.555 Az status=0009 Ze status=0008 15:45:54 Check angles 15:45:54 SkyScan query 15:45:55 SkyScan query done: ret=0 az=81.87<-5458 ze=66.495<-7567 Statuses=0009 0008 15:45:55 Msec=750 True Az=81.87 Ze=66.495 Az status=0009 Ze status=0008 15:45:55 Check angles 15:45:55 SkyScan query 15:45:56 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 15:45:56 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 15:45:56 Check angles 15:45:56 SkyScan query 15:45:56 SkyScan query done: ret=0 az=117.225<-7815 ze=66.495<-7567 Statuses=0009 0008 15:45:56 Msec=2250 True Az=117.225 Ze=66.495 Az status=0009 Ze status=0008 15:45:56 Check angles 15:45:56 SkyScan query 15:45:57 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 15:45:57 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 15:45:57 Check angles 15:45:57 SkyScan query 15:45:58 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 15:45:58 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 15:45:58 Check angles 15:45:58 SkyScan query 15:45:59 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:45:59 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:45:59 Message to Master queued w/err=0: serial=121285 error=0 15:46:04 Received message from Master: op=Filter serial=121286 15:46:04 Color wheel filter change from 0 to 0 15:46:04 FLIGetFilterPos err=0 currentPosition=0 15:46:04 FLIGetStepsRemaining err=0 RemainingSteps=0 15:46:04 Filter is already there-color wheel unchanged 15:46:04 Received message from Master: op=Shutter serial=121287 15:46:04 Shutter LASER close 15:46:04 Received message from Camera: op=State serial=121289 15:46:04 GetSingleValue result=40 Value=cccccccc 15:46:04 SkyScan query 15:46:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:46:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:04 Parameters OK 15:46:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:04 Set A/D data flow result=40 15:46:04 Set A/D channel type result=40 15:46:04 Set A/D encoding result=40 15:46:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:04 Set channel filter=0.000000e+000 result=40 15:46:04 Config A/D Result=40 15:46:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:04 Get A/D filter: -9.255963e+061 result=40 15:46:04 Get A/D value=-858993460 result=40 15:46:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:04 Parameters OK 15:46:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:04 Set A/D data flow result=40 15:46:04 Set A/D channel type result=40 15:46:04 Set A/D encoding result=40 15:46:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:04 Set channel filter=0.000000e+000 result=40 15:46:04 Config A/D Result=40 15:46:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:04 Get A/D filter: -9.255963e+061 result=40 15:46:04 Get A/D value=-858993460 result=40 15:46:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:46:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:46:04 Aux= 15:46:04 Message to Camera, serial 121289 queued 15:46:41 Received message from Master: op=PointingHead serial=121302 15:46:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:46:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:46:42 Point started: ret=0 15:46:42 point_skyscan result=0 15:46:42 Check angles 15:46:42 SkyScan query 15:46:43 SkyScan query done: ret=0 az=134.805<-8987 ze=36.465<-9569 Statuses=0009 0009 15:46:43 Msec=0 True Az=134.805 Ze=36.465 Az status=0009 Ze status=0009 15:46:43 Check angles 15:46:43 SkyScan query 15:46:44 SkyScan query done: ret=0 az=117.3<-7820 ze=15.54<-10964 Statuses=0009 0009 15:46:44 Msec=750 True Az=117.3 Ze=15.54 Az status=0009 Ze status=0009 15:46:44 Check angles 15:46:44 SkyScan query 15:46:44 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.52<-12368 Statuses=0009 0009 15:46:44 Msec=1500 True Az=99.885 Ze=-5.52 Az status=0009 Ze status=0009 15:46:45 Check angles 15:46:45 SkyScan query 15:46:45 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.4<-13760 Statuses=0009 0009 15:46:45 Msec=2250 True Az=82.41 Ze=-26.4 Az status=0009 Ze status=0009 15:46:45 Check angles 15:46:45 SkyScan query 15:46:46 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.565<-14571 Statuses=0009 0008 15:46:46 Msec=3000 True Az=64.875 Ze=-38.565 Az status=0009 Ze status=0008 15:46:46 Check angles 15:46:46 SkyScan query 15:46:47 SkyScan query done: ret=0 az=47.4<-3160 ze=-38.535<-14569 Statuses=0009 0008 15:46:47 Msec=3750 True Az=47.4 Ze=-38.535 Az status=0009 Ze status=0008 15:46:47 Check angles 15:46:47 SkyScan query 15:46:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:46:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:46:47 Message to Master queued w/err=0: serial=121302 error=0 15:46:52 Received message from Master: op=Filter serial=121303 15:46:52 Color wheel filter change from 0 to 0 15:46:52 FLIGetFilterPos err=0 currentPosition=0 15:46:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:46:52 Filter is already there-color wheel unchanged 15:46:53 Received message from Master: op=Shutter serial=121304 15:46:53 Shutter LASER close 15:46:53 Received message from Camera: op=State serial=121306 15:46:53 GetSingleValue result=40 Value=cccccccc 15:46:53 SkyScan query 15:46:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:46:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:53 Parameters OK 15:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:53 Set A/D data flow result=40 15:46:53 Set A/D channel type result=40 15:46:53 Set A/D encoding result=40 15:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:53 Set channel filter=0.000000e+000 result=40 15:46:53 Config A/D Result=40 15:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:53 Get A/D filter: -9.255963e+061 result=40 15:46:53 Get A/D value=-858993460 result=40 15:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:53 Parameters OK 15:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:53 Set A/D data flow result=40 15:46:53 Set A/D channel type result=40 15:46:53 Set A/D encoding result=40 15:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:53 Set channel filter=0.000000e+000 result=40 15:46:53 Config A/D Result=40 15:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:53 Get A/D filter: -9.255963e+061 result=40 15:46:53 Get A/D value=-858993460 result=40 15:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:46:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:46:53 Aux= 15:46:53 Message to Camera, serial 121306 queued 15:47:30 Received message from Master: op=PointingHead serial=121319 15:47:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:47:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:47:30 Point started: ret=0 15:47:30 point_skyscan result=0 15:47:31 Check angles 15:47:31 SkyScan query 15:47:32 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.34<-16556 Statuses=0009 0009 15:47:32 Msec=0 True Az=64.095 Ze=-68.34 Az status=0009 Ze status=0009 15:47:32 Check angles 15:47:32 SkyScan query 15:47:32 SkyScan query done: ret=0 az=81.87<-5458 ze=-89.76<-17984 Statuses=0009 0009 15:47:32 Msec=750 True Az=81.87 Ze=-89.76 Az status=0009 Ze status=0009 15:47:33 Check angles 15:47:33 SkyScan query 15:47:33 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.73<-19382 Statuses=0009 0009 15:47:33 Msec=1500 True Az=99.39 Ze=-110.73 Az status=0009 Ze status=0009 15:47:33 Check angles 15:47:33 SkyScan query 15:47:34 SkyScan query done: ret=0 az=117.33<-7822 ze=-132.075<-20805 Statuses=0009 0009 15:47:34 Msec=2250 True Az=117.33 Ze=-132.075 Az status=0009 Ze status=0009 15:47:34 Check angles 15:47:34 SkyScan query 15:47:35 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 15:47:35 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 15:47:35 Check angles 15:47:35 SkyScan query 15:47:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:47:35 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:47:35 Message to Master queued w/err=0: serial=121319 error=0 15:47:40 Received message from Master: op=Filter serial=121320 15:47:40 Color wheel filter change from 0 to 0 15:47:40 FLIGetFilterPos err=0 currentPosition=0 15:47:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:47:40 Filter is already there-color wheel unchanged 15:47:41 Received message from Master: op=Shutter serial=121321 15:47:41 Shutter LASER close 15:47:41 Received message from Camera: op=State serial=121323 15:47:41 GetSingleValue result=40 Value=cccccccc 15:47:41 SkyScan query 15:47:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:47:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:41 Parameters OK 15:47:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:41 Set A/D data flow result=40 15:47:41 Set A/D channel type result=40 15:47:41 Set A/D encoding result=40 15:47:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:41 Set channel filter=0.000000e+000 result=40 15:47:41 Config A/D Result=40 15:47:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:41 Get A/D filter: -9.255963e+061 result=40 15:47:41 Get A/D value=-858993460 result=40 15:47:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:41 Parameters OK 15:47:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:41 Set A/D data flow result=40 15:47:41 Set A/D channel type result=40 15:47:41 Set A/D encoding result=40 15:47:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:41 Set channel filter=0.000000e+000 result=40 15:47:41 Config A/D Result=40 15:47:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:41 Get A/D filter: -9.255963e+061 result=40 15:47:41 Get A/D value=-858993460 result=40 15:47:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:47:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:47:41 Aux= 15:47:41 Message to Camera, serial 121323 queued 15:48:18 Received message from Master: op=PointingHead serial=121336 15:48:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:48:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:48:18 Point started: ret=0 15:48:18 point_skyscan result=0 15:48:19 Check angles 15:48:19 SkyScan query 15:48:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 15:48:20 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 15:48:20 Check angles 15:48:20 SkyScan query 15:48:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:48:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:48:21 Message to Master queued w/err=0: serial=121336 error=0 15:48:26 Received message from Master: op=Filter serial=121337 15:48:26 Color wheel filter change from 0 to 0 15:48:26 FLIGetFilterPos err=0 currentPosition=0 15:48:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:26 Filter is already there-color wheel unchanged 15:48:26 Received message from Master: op=Shutter serial=121338 15:48:26 Shutter LASER open 15:48:26 Received message from Camera: op=State serial=121340 15:48:26 GetSingleValue result=40 Value=cccccccc 15:48:26 SkyScan query 15:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:48:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:26 Parameters OK 15:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:26 Set A/D data flow result=40 15:48:26 Set A/D channel type result=40 15:48:26 Set A/D encoding result=40 15:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:26 Set channel filter=0.000000e+000 result=40 15:48:26 Config A/D Result=40 15:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:26 Get A/D filter: -9.255963e+061 result=40 15:48:26 Get A/D value=-858993460 result=40 15:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:26 Parameters OK 15:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:26 Set A/D data flow result=40 15:48:26 Set A/D channel type result=40 15:48:26 Set A/D encoding result=40 15:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:26 Set channel filter=0.000000e+000 result=40 15:48:26 Config A/D Result=40 15:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:26 Get A/D filter: -9.255963e+061 result=40 15:48:26 Get A/D value=-858993460 result=40 15:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:26 Aux= 15:48:26 Message to Camera, serial 121340 queued 15:48:35 Received message from Master: op=Shutter serial=121350 15:48:35 Shutter LASER close 15:48:35 Received message from Master: op=PointingHead serial=121354 15:48:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:48:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:48:36 Point started: ret=0 15:48:36 point_skyscan result=0 15:48:37 Check angles 15:48:37 SkyScan query 15:48:37 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.31<-21554 Statuses=0009 0009 15:48:37 Msec=0 True Az=135.885 Ze=-143.31 Az status=0009 Ze status=0009 15:48:37 Check angles 15:48:37 SkyScan query 15:48:38 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.89<-20126 Statuses=0009 0009 15:48:38 Msec=750 True Az=153.81 Ze=-121.89 Az status=0009 Ze status=0009 15:48:38 Check angles 15:48:38 SkyScan query 15:48:39 SkyScan query done: ret=0 az=171.21<-11414 ze=-100.95<-18730 Statuses=0009 0009 15:48:39 Msec=1500 True Az=171.21 Ze=-100.95 Az status=0009 Ze status=0009 15:48:39 Check angles 15:48:39 SkyScan query 15:48:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.04<-17336 Statuses=0008 0009 15:48:39 Msec=2250 True Az=176.01 Ze=-80.04 Az status=0008 Ze status=0009 15:48:40 Check angles 15:48:40 SkyScan query 15:48:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.56<-15904 Statuses=0008 0009 15:48:40 Msec=3000 True Az=176.01 Ze=-58.56 Az status=0008 Ze status=0009 15:48:40 Check angles 15:48:40 SkyScan query 15:48:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:48:41 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:48:41 Message to Master queued w/err=0: serial=121354 error=0 15:48:46 Received message from Master: op=Filter serial=121355 15:48:46 Color wheel filter change from 0 to 0 15:48:46 FLIGetFilterPos err=0 currentPosition=0 15:48:46 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:46 Filter is already there-color wheel unchanged 15:48:46 Received message from Master: op=Shutter serial=121356 15:48:46 Shutter LASER close 15:48:46 Received message from Camera: op=State serial=121358 15:48:46 GetSingleValue result=40 Value=cccccccc 15:48:46 SkyScan query 15:48:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:48:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:47 Parameters OK 15:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:47 Set A/D data flow result=40 15:48:47 Set A/D channel type result=40 15:48:47 Set A/D encoding result=40 15:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:47 Set channel filter=0.000000e+000 result=40 15:48:47 Config A/D Result=40 15:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:47 Get A/D filter: -9.255963e+061 result=40 15:48:47 Get A/D value=-858993460 result=40 15:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:47 Parameters OK 15:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:47 Set A/D data flow result=40 15:48:47 Set A/D channel type result=40 15:48:47 Set A/D encoding result=40 15:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:47 Set channel filter=0.000000e+000 result=40 15:48:47 Config A/D Result=40 15:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:47 Get A/D filter: -9.255963e+061 result=40 15:48:47 Get A/D value=-858993460 result=40 15:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:47 Aux= 15:48:47 Message to Camera, serial 121358 queued 15:49:24 Received message from Master: op=PointingHead serial=121371 15:49:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:49:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:49:24 Point started: ret=0 15:49:24 point_skyscan result=0 15:49:25 Check angles 15:49:25 SkyScan query 15:49:25 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.645<-13443 Statuses=0009 0009 15:49:25 Msec=0 True Az=152.955 Ze=-21.645 Az status=0009 Ze status=0009 15:49:26 Check angles 15:49:26 SkyScan query 15:49:26 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.285<-12019 Statuses=0009 0009 15:49:26 Msec=750 True Az=135.12 Ze=-0.285 Az status=0009 Ze status=0009 15:49:26 Check angles 15:49:26 SkyScan query 15:49:27 SkyScan query done: ret=0 az=117.57<-7838 ze=20.685<-10621 Statuses=0009 0009 15:49:27 Msec=1500 True Az=117.57 Ze=20.685 Az status=0009 Ze status=0009 15:49:27 Check angles 15:49:27 SkyScan query 15:49:28 SkyScan query done: ret=0 az=100.2<-6680 ze=41.64<-9224 Statuses=0009 0009 15:49:28 Msec=2250 True Az=100.2 Ze=41.64 Az status=0009 Ze status=0009 15:49:28 Check angles 15:49:28 SkyScan query 15:49:28 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:49:28 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:49:29 Check angles 15:49:29 SkyScan query 15:49:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:49:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:49:29 Message to Master queued w/err=0: serial=121371 error=0 15:49:34 Received message from Master: op=Filter serial=121372 15:49:34 Color wheel filter change from 0 to 0 15:49:34 FLIGetFilterPos err=0 currentPosition=0 15:49:34 FLIGetStepsRemaining err=0 RemainingSteps=0 15:49:34 Filter is already there-color wheel unchanged 15:49:34 Received message from Master: op=Shutter serial=121373 15:49:34 Shutter LASER close 15:49:34 Received message from Camera: op=State serial=121375 15:49:34 GetSingleValue result=40 Value=cccccccc 15:49:34 SkyScan query 15:49:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:49:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:35 Parameters OK 15:49:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:35 Set A/D data flow result=40 15:49:35 Set A/D channel type result=40 15:49:35 Set A/D encoding result=40 15:49:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:35 Set channel filter=0.000000e+000 result=40 15:49:35 Config A/D Result=40 15:49:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:35 Get A/D filter: -9.255963e+061 result=40 15:49:35 Get A/D value=-858993460 result=40 15:49:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:35 Parameters OK 15:49:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:35 Set A/D data flow result=40 15:49:35 Set A/D channel type result=40 15:49:35 Set A/D encoding result=40 15:49:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:35 Set channel filter=0.000000e+000 result=40 15:49:35 Config A/D Result=40 15:49:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:35 Get A/D filter: -9.255963e+061 result=40 15:49:35 Get A/D value=-858993460 result=40 15:49:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:49:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:49:35 Aux= 15:49:35 Message to Camera, serial 121375 queued 15:50:12 Received message from Master: op=PointingHead serial=121388 15:50:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:50:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:50:12 Point started: ret=0 15:50:12 point_skyscan result=0 15:50:13 Check angles 15:50:13 SkyScan query 15:50:13 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 15:50:13 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 15:50:14 Check angles 15:50:14 SkyScan query 15:50:14 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 15:50:14 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 15:50:14 Check angles 15:50:14 SkyScan query 15:50:15 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 15:50:15 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 15:50:15 Check angles 15:50:15 SkyScan query 15:50:16 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 15:50:16 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 15:50:16 Check angles 15:50:16 SkyScan query 15:50:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:50:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:50:17 Check angles 15:50:17 SkyScan query 15:50:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:50:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:50:17 Message to Master queued w/err=0: serial=121388 error=0 15:50:22 Received message from Master: op=Filter serial=121389 15:50:22 Color wheel filter change from 0 to 0 15:50:22 FLIGetFilterPos err=0 currentPosition=0 15:50:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:50:22 Filter is already there-color wheel unchanged 15:50:22 Received message from Master: op=Shutter serial=121390 15:50:22 Shutter LASER close 15:50:22 Received message from Camera: op=State serial=121392 15:50:22 GetSingleValue result=40 Value=cccccccc 15:50:22 SkyScan query 15:50:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:50:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:23 Parameters OK 15:50:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:23 Set A/D data flow result=40 15:50:23 Set A/D channel type result=40 15:50:23 Set A/D encoding result=40 15:50:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:23 Set channel filter=0.000000e+000 result=40 15:50:23 Config A/D Result=40 15:50:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:23 Get A/D filter: -9.255963e+061 result=40 15:50:23 Get A/D value=-858993460 result=40 15:50:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:23 Parameters OK 15:50:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:23 Set A/D data flow result=40 15:50:23 Set A/D channel type result=40 15:50:23 Set A/D encoding result=40 15:50:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:23 Set channel filter=0.000000e+000 result=40 15:50:23 Config A/D Result=40 15:50:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:23 Get A/D filter: -9.255963e+061 result=40 15:50:23 Get A/D value=-858993460 result=40 15:50:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:50:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:50:23 Aux= 15:50:23 Message to Camera, serial 121392 queued 15:50:59 Received message from Master: op=PointingHead serial=121404 15:50:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:50:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:50:59 Point started: ret=0 15:50:59 point_skyscan result=0 15:51:00 Check angles 15:51:00 SkyScan query 15:51:01 SkyScan query done: ret=0 az=153.165<-10211 ze=9<-11400 Statuses=0009 0009 15:51:01 Msec=0 True Az=153.165 Ze=9 Az status=0009 Ze status=0009 15:51:01 Check angles 15:51:01 SkyScan query 15:51:01 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.525<-12835 Statuses=0009 0009 15:51:01 Msec=750 True Az=135.315 Ze=-12.525 Az status=0009 Ze status=0009 15:51:02 Check angles 15:51:02 SkyScan query 15:51:02 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.33<-14222 Statuses=0009 0009 15:51:02 Msec=1500 True Az=117.81 Ze=-33.33 Az status=0009 Ze status=0009 15:51:02 Check angles 15:51:02 SkyScan query 15:51:03 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.555<-15437 Statuses=0009 0009 15:51:03 Msec=2250 True Az=100.08 Ze=-51.555 Az status=0009 Ze status=0009 15:51:03 Check angles 15:51:03 SkyScan query 15:51:04 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:51:04 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:51:04 Check angles 15:51:04 SkyScan query 15:51:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:51:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:51:04 Message to Master queued w/err=0: serial=121404 error=0 15:51:09 Received message from Master: op=Filter serial=121405 15:51:09 Color wheel filter change from 0 to 0 15:51:09 FLIGetFilterPos err=0 currentPosition=0 15:51:09 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:09 Filter is already there-color wheel unchanged 15:51:10 Received message from Master: op=Shutter serial=121406 15:51:10 Shutter LASER close 15:51:10 Received message from Camera: op=State serial=121408 15:51:10 GetSingleValue result=40 Value=cccccccc 15:51:10 SkyScan query 15:51:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:51:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:10 Parameters OK 15:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:10 Set A/D data flow result=40 15:51:10 Set A/D channel type result=40 15:51:10 Set A/D encoding result=40 15:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:10 Set channel filter=0.000000e+000 result=40 15:51:10 Config A/D Result=40 15:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:10 Get A/D filter: -9.255963e+061 result=40 15:51:10 Get A/D value=-858993460 result=40 15:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:10 Parameters OK 15:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:10 Set A/D data flow result=40 15:51:10 Set A/D channel type result=40 15:51:10 Set A/D encoding result=40 15:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:10 Set channel filter=0.000000e+000 result=40 15:51:10 Config A/D Result=40 15:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:10 Get A/D filter: -9.255963e+061 result=40 15:51:10 Get A/D value=-858993460 result=40 15:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:10 Aux= 15:51:10 Message to Camera, serial 121408 queued 15:51:47 Received message from Master: op=PointingHead serial=121421 15:51:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:51:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:51:47 Point started: ret=0 15:51:47 point_skyscan result=0 15:51:48 Check angles 15:51:48 SkyScan query 15:51:49 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.36<-17424 Statuses=0009 0009 15:51:49 Msec=0 True Az=109.14 Ze=-81.36 Az status=0009 Ze status=0009 15:51:49 Check angles 15:51:49 SkyScan query 15:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 15:51:49 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 15:51:50 Check angles 15:51:50 SkyScan query 15:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.14<-20276 Statuses=0008 0009 15:51:50 Msec=1500 True Az=112.995 Ze=-124.14 Az status=0008 Ze status=0009 15:51:50 Check angles 15:51:50 SkyScan query 15:51:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 15:51:51 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 15:51:51 Check angles 15:51:51 SkyScan query 15:51:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 15:51:52 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 15:51:52 Check angles 15:51:52 SkyScan query 15:51:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:51:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:51:52 Message to Master queued w/err=0: serial=121421 error=0 15:51:57 Received message from Master: op=Filter serial=121422 15:51:57 Color wheel filter change from 0 to 0 15:51:57 FLIGetFilterPos err=0 currentPosition=0 15:51:57 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:57 Filter is already there-color wheel unchanged 15:51:58 Received message from Master: op=Shutter serial=121423 15:51:58 Shutter LASER open 15:51:58 Received message from Camera: op=State serial=121425 15:51:58 GetSingleValue result=40 Value=cccccccc 15:51:58 SkyScan query 15:51:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:51:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:58 Parameters OK 15:51:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:58 Set A/D data flow result=40 15:51:58 Set A/D channel type result=40 15:51:58 Set A/D encoding result=40 15:51:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:58 Set channel filter=0.000000e+000 result=40 15:51:58 Config A/D Result=40 15:51:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:58 Get A/D filter: -9.255963e+061 result=40 15:51:58 Get A/D value=-858993460 result=40 15:51:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:58 Parameters OK 15:51:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:58 Set A/D data flow result=40 15:51:58 Set A/D channel type result=40 15:51:58 Set A/D encoding result=40 15:51:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:58 Set channel filter=0.000000e+000 result=40 15:51:58 Config A/D Result=40 15:51:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:58 Get A/D filter: -9.255963e+061 result=40 15:51:58 Get A/D value=-858993460 result=40 15:51:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:58 Aux= 15:51:58 Message to Camera, serial 121425 queued 15:52:07 Received message from Master: op=Shutter serial=121435 15:52:07 Shutter LASER close 15:52:07 Received message from Master: op=PointingHead serial=121439 15:52:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:52:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:52:08 Point started: ret=0 15:52:08 point_skyscan result=0 15:52:08 Check angles 15:52:08 SkyScan query 15:52:09 SkyScan query done: ret=0 az=89.64<-5976 ze=157.035<-1531 Statuses=0009 0009 15:52:09 Msec=0 True Az=89.64 Ze=157.035 Az status=0009 Ze status=0009 15:52:09 Check angles 15:52:09 SkyScan query 15:52:10 SkyScan query done: ret=0 az=72.225<-4815 ze=136.08<-2928 Statuses=0009 0009 15:52:10 Msec=750 True Az=72.225 Ze=136.08 Az status=0009 Ze status=0009 15:52:10 Check angles 15:52:10 SkyScan query 15:52:10 SkyScan query done: ret=0 az=54.6<-3640 ze=114.69<-4354 Statuses=0009 0009 15:52:10 Msec=1500 True Az=54.6 Ze=114.69 Az status=0009 Ze status=0009 15:52:11 Check angles 15:52:11 SkyScan query 15:52:11 SkyScan query done: ret=0 az=40.965<-2731 ze=93.735<-5751 Statuses=0009 0009 15:52:11 Msec=2250 True Az=40.965 Ze=93.735 Az status=0009 Ze status=0009 15:52:11 Check angles 15:52:11 SkyScan query 15:52:12 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 15:52:12 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 15:52:12 Check angles 15:52:12 SkyScan query 15:52:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 15:52:13 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 15:52:13 Check angles 15:52:13 SkyScan query 15:52:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:52:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:52:13 Message to Master queued w/err=0: serial=121439 error=0 15:52:18 Received message from Master: op=Filter serial=121440 15:52:18 Color wheel filter change from 0 to 0 15:52:18 FLIGetFilterPos err=0 currentPosition=0 15:52:18 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:18 Filter is already there-color wheel unchanged 15:52:19 Received message from Master: op=Shutter serial=121441 15:52:19 Shutter LASER close 15:52:19 Received message from Camera: op=State serial=121443 15:52:19 GetSingleValue result=40 Value=cccccccc 15:52:19 SkyScan query 15:52:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:52:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:19 Parameters OK 15:52:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:19 Set A/D data flow result=40 15:52:19 Set A/D channel type result=40 15:52:19 Set A/D encoding result=40 15:52:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:19 Set channel filter=0.000000e+000 result=40 15:52:19 Config A/D Result=40 15:52:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:19 Get A/D filter: -9.255963e+061 result=40 15:52:19 Get A/D value=-858993460 result=40 15:52:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:19 Parameters OK 15:52:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:19 Set A/D data flow result=40 15:52:19 Set A/D channel type result=40 15:52:19 Set A/D encoding result=40 15:52:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:19 Set channel filter=0.000000e+000 result=40 15:52:19 Config A/D Result=40 15:52:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:19 Get A/D filter: -9.255963e+061 result=40 15:52:19 Get A/D value=-858993460 result=40 15:52:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:19 Aux= 15:52:19 Message to Camera, serial 121443 queued 15:52:56 Received message from Master: op=PointingHead serial=121456 15:52:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:52:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:52:57 Point started: ret=0 15:52:57 point_skyscan result=0 15:52:57 Check angles 15:52:57 SkyScan query 15:52:58 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 15:52:58 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 15:52:58 Check angles 15:52:58 SkyScan query 15:52:59 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 15:52:59 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 15:52:59 Check angles 15:52:59 SkyScan query 15:52:59 SkyScan query done: ret=0 az=99.36<-6624 ze=66.495<-7567 Statuses=0009 0008 15:52:59 Msec=1500 True Az=99.36 Ze=66.495 Az status=0009 Ze status=0008 15:53:00 Check angles 15:53:00 SkyScan query 15:53:00 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 15:53:00 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 15:53:00 Check angles 15:53:00 SkyScan query 15:53:01 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 15:53:01 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 15:53:01 Check angles 15:53:01 SkyScan query 15:53:02 SkyScan query done: ret=0 az=151.59<-10106 ze=66.495<-7567 Statuses=0009 0008 15:53:02 Msec=3750 True Az=151.59 Ze=66.495 Az status=0009 Ze status=0008 15:53:02 Check angles 15:53:02 SkyScan query 15:53:02 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:53:02 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:53:02 Message to Master queued w/err=0: serial=121456 error=0 15:53:07 Received message from Master: op=Filter serial=121457 15:53:07 Color wheel filter change from 0 to 0 15:53:07 FLIGetFilterPos err=0 currentPosition=0 15:53:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:53:07 Filter is already there-color wheel unchanged 15:53:08 Received message from Master: op=Shutter serial=121458 15:53:08 Shutter LASER close 15:53:08 Received message from Camera: op=State serial=121460 15:53:08 GetSingleValue result=40 Value=cccccccc 15:53:08 SkyScan query 15:53:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:53:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:08 Parameters OK 15:53:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:08 Set A/D data flow result=40 15:53:08 Set A/D channel type result=40 15:53:08 Set A/D encoding result=40 15:53:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:08 Set channel filter=0.000000e+000 result=40 15:53:08 Config A/D Result=40 15:53:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:08 Get A/D filter: -9.255963e+061 result=40 15:53:08 Get A/D value=-858993460 result=40 15:53:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:08 Parameters OK 15:53:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:08 Set A/D data flow result=40 15:53:08 Set A/D channel type result=40 15:53:08 Set A/D encoding result=40 15:53:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:08 Set channel filter=0.000000e+000 result=40 15:53:08 Config A/D Result=40 15:53:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:08 Get A/D filter: -9.255963e+061 result=40 15:53:08 Get A/D value=-858993460 result=40 15:53:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:53:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:53:08 Aux= 15:53:08 Message to Camera, serial 121460 queued 15:53:45 Received message from Master: op=PointingHead serial=121473 15:53:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:53:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:53:45 Point started: ret=0 15:53:45 point_skyscan result=0 15:53:46 Check angles 15:53:46 SkyScan query 15:53:47 SkyScan query done: ret=0 az=134.55<-8970 ze=36.255<-9583 Statuses=0009 0009 15:53:47 Msec=0 True Az=134.55 Ze=36.255 Az status=0009 Ze status=0009 15:53:47 Check angles 15:53:47 SkyScan query 15:53:47 SkyScan query done: ret=0 az=116.73<-7782 ze=14.805<-11013 Statuses=0009 0009 15:53:47 Msec=750 True Az=116.73 Ze=14.805 Az status=0009 Ze status=0009 15:53:48 Check angles 15:53:48 SkyScan query 15:53:48 SkyScan query done: ret=0 az=98.805<-6587 ze=-6.6<-12440 Statuses=0009 0009 15:53:48 Msec=1500 True Az=98.805 Ze=-6.6 Az status=0009 Ze status=0009 15:53:48 Check angles 15:53:48 SkyScan query 15:53:49 SkyScan query done: ret=0 az=81.525<-5435 ze=-27.57<-13838 Statuses=0009 0009 15:53:49 Msec=2250 True Az=81.525 Ze=-27.57 Az status=0009 Ze status=0009 15:53:49 Check angles 15:53:49 SkyScan query 15:53:50 SkyScan query done: ret=0 az=63.945<-4263 ze=-38.58<-14572 Statuses=0009 0008 15:53:50 Msec=3000 True Az=63.945 Ze=-38.58 Az status=0009 Ze status=0008 15:53:50 Check angles 15:53:50 SkyScan query 15:53:50 SkyScan query done: ret=0 az=46.545<-3103 ze=-38.52<-14568 Statuses=0009 0008 15:53:50 Msec=3750 True Az=46.545 Ze=-38.52 Az status=0009 Ze status=0008 15:53:51 Check angles 15:53:51 SkyScan query 15:53:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:53:51 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:53:51 Message to Master queued w/err=0: serial=121473 error=0 15:53:56 Received message from Master: op=Filter serial=121474 15:53:56 Color wheel filter change from 0 to 0 15:53:56 FLIGetFilterPos err=0 currentPosition=0 15:53:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:53:56 Filter is already there-color wheel unchanged 15:53:56 Received message from Master: op=Shutter serial=121475 15:53:56 Shutter LASER close 15:53:56 Received message from Camera: op=State serial=121477 15:53:56 GetSingleValue result=40 Value=cccccccc 15:53:56 SkyScan query 15:53:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:53:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:57 Parameters OK 15:53:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:57 Set A/D data flow result=40 15:53:57 Set A/D channel type result=40 15:53:57 Set A/D encoding result=40 15:53:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:57 Set channel filter=0.000000e+000 result=40 15:53:57 Config A/D Result=40 15:53:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:57 Get A/D filter: -9.255963e+061 result=40 15:53:57 Get A/D value=-858993460 result=40 15:53:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:57 Parameters OK 15:53:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:57 Set A/D data flow result=40 15:53:57 Set A/D channel type result=40 15:53:57 Set A/D encoding result=40 15:53:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:57 Set channel filter=0.000000e+000 result=40 15:53:57 Config A/D Result=40 15:53:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:57 Get A/D filter: -9.255963e+061 result=40 15:53:57 Get A/D value=-858993460 result=40 15:53:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:53:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:53:57 Aux= 15:53:57 Message to Camera, serial 121477 queued 15:54:34 Received message from Master: op=PointingHead serial=121490 15:54:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:54:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:54:34 Point started: ret=0 15:54:34 point_skyscan result=0 15:54:35 Check angles 15:54:35 SkyScan query 15:54:36 SkyScan query done: ret=0 az=63.825<-4255 ze=-67.995<-16533 Statuses=0009 0009 15:54:36 Msec=0 True Az=63.825 Ze=-67.995 Az status=0009 Ze status=0009 15:54:36 Check angles 15:54:36 SkyScan query 15:54:36 SkyScan query done: ret=0 az=81.18<-5412 ze=-88.98<-17932 Statuses=0009 0009 15:54:36 Msec=750 True Az=81.18 Ze=-88.98 Az status=0009 Ze status=0009 15:54:36 Check angles 15:54:36 SkyScan query 15:54:37 SkyScan query done: ret=0 az=98.67<-6578 ze=-109.905<-19327 Statuses=0009 0009 15:54:37 Msec=1500 True Az=98.67 Ze=-109.905 Az status=0009 Ze status=0009 15:54:37 Check angles 15:54:37 SkyScan query 15:54:38 SkyScan query done: ret=0 az=116.16<-7744 ze=-130.89<-20726 Statuses=0009 0009 15:54:38 Msec=2250 True Az=116.16 Ze=-130.89 Az status=0009 Ze status=0009 15:54:38 Check angles 15:54:38 SkyScan query 15:54:39 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 15:54:39 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 15:54:39 Check angles 15:54:39 SkyScan query 15:54:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:54:39 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:54:39 Message to Master queued w/err=0: serial=121490 error=0 15:54:44 Received message from Master: op=Filter serial=121491 15:54:44 Color wheel filter change from 0 to 0 15:54:44 FLIGetFilterPos err=0 currentPosition=0 15:54:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:54:44 Filter is already there-color wheel unchanged 15:54:44 Received message from Master: op=Shutter serial=121492 15:54:44 Shutter LASER close 15:54:44 Received message from Camera: op=State serial=121494 15:54:44 GetSingleValue result=40 Value=cccccccc 15:54:44 SkyScan query 15:54:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:54:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:45 Parameters OK 15:54:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:45 Set A/D data flow result=40 15:54:45 Set A/D channel type result=40 15:54:45 Set A/D encoding result=40 15:54:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:45 Set channel filter=0.000000e+000 result=40 15:54:45 Config A/D Result=40 15:54:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:45 Get A/D filter: -9.255963e+061 result=40 15:54:45 Get A/D value=-858993460 result=40 15:54:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:45 Parameters OK 15:54:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:45 Set A/D data flow result=40 15:54:45 Set A/D channel type result=40 15:54:45 Set A/D encoding result=40 15:54:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:45 Set channel filter=0.000000e+000 result=40 15:54:45 Config A/D Result=40 15:54:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:45 Get A/D filter: -9.255963e+061 result=40 15:54:45 Get A/D value=-858993460 result=40 15:54:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:54:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:54:45 Aux= 15:54:45 Message to Camera, serial 121494 queued 15:55:22 Received message from Master: op=PointingHead serial=121507 15:55:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:55:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:55:22 Point started: ret=0 15:55:22 point_skyscan result=0 15:55:23 Check angles 15:55:23 SkyScan query 15:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0009 0009 15:55:24 Msec=0 True Az=112.995 Ze=-171.3 Az status=0009 Ze status=0009 15:55:24 Check angles 15:55:24 SkyScan query 15:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:55:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:55:24 Message to Master queued w/err=0: serial=121507 error=0 15:55:29 Received message from Master: op=Filter serial=121508 15:55:29 Color wheel filter change from 0 to 0 15:55:29 FLIGetFilterPos err=0 currentPosition=0 15:55:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:55:29 Filter is already there-color wheel unchanged 15:55:30 Received message from Master: op=Shutter serial=121509 15:55:30 Shutter LASER open 15:55:30 Received message from Camera: op=State serial=121511 15:55:30 GetSingleValue result=40 Value=cccccccc 15:55:30 SkyScan query 15:55:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:55:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:30 Parameters OK 15:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:30 Set A/D data flow result=40 15:55:30 Set A/D channel type result=40 15:55:30 Set A/D encoding result=40 15:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:30 Set channel filter=0.000000e+000 result=40 15:55:30 Config A/D Result=40 15:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:30 Get A/D filter: -9.255963e+061 result=40 15:55:30 Get A/D value=-858993460 result=40 15:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:30 Parameters OK 15:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:30 Set A/D data flow result=40 15:55:30 Set A/D channel type result=40 15:55:30 Set A/D encoding result=40 15:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:30 Set channel filter=0.000000e+000 result=40 15:55:30 Config A/D Result=40 15:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:30 Get A/D filter: -9.255963e+061 result=40 15:55:30 Get A/D value=-858993460 result=40 15:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:55:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:55:30 Aux= 15:55:30 Message to Camera, serial 121511 queued 15:55:38 Received message from Master: op=Shutter serial=121520 15:55:38 Shutter LASER close 15:55:38 Received message from Master: op=PointingHead serial=121524 15:55:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:55:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:55:39 Point started: ret=0 15:55:39 point_skyscan result=0 15:55:39 Check angles 15:55:39 SkyScan query 15:55:40 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.445<-21563 Statuses=0009 0009 15:55:40 Msec=0 True Az=135.765 Ze=-143.445 Az status=0009 Ze status=0009 [UTC 2018-12-13 15:55:40] 15:55:40 Check angles 15:55:40 SkyScan query 15:55:41 SkyScan query done: ret=0 az=155.085<-10339 ze=-120.255<-20017 Statuses=0009 0009 15:55:41 Msec=750 True Az=155.085 Ze=-120.255 Az status=0009 Ze status=0009 15:55:41 Check angles 15:55:41 SkyScan query 15:55:42 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.085<-18739 Statuses=0009 0009 15:55:42 Msec=1500 True Az=171.18 Ze=-101.085 Az status=0009 Ze status=0009 15:55:42 Check angles 15:55:42 SkyScan query 15:55:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.695<-17313 Statuses=0008 0009 15:55:42 Msec=2250 True Az=176.01 Ze=-79.695 Az status=0008 Ze status=0009 15:55:42 Check angles 15:55:42 SkyScan query 15:55:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.695<-15913 Statuses=0008 0009 15:55:43 Msec=3000 True Az=176.01 Ze=-58.695 Az status=0008 Ze status=0009 15:55:43 Check angles 15:55:43 SkyScan query 15:55:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:55:44 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:55:44 Message to Master queued w/err=0: serial=121524 error=0 15:55:49 Received message from Master: op=Filter serial=121525 15:55:49 Color wheel filter change from 0 to 0 15:55:49 FLIGetFilterPos err=0 currentPosition=0 15:55:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:55:49 Filter is already there-color wheel unchanged 15:55:49 Received message from Master: op=Shutter serial=121526 15:55:49 Shutter LASER close 15:55:49 Received message from Camera: op=State serial=121528 15:55:49 GetSingleValue result=40 Value=cccccccc 15:55:49 SkyScan query 15:55:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:55:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:50 Parameters OK 15:55:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:50 Set A/D data flow result=40 15:55:50 Set A/D channel type result=40 15:55:50 Set A/D encoding result=40 15:55:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:50 Set channel filter=0.000000e+000 result=40 15:55:50 Config A/D Result=40 15:55:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:50 Get A/D filter: -9.255963e+061 result=40 15:55:50 Get A/D value=-858993460 result=40 15:55:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:50 Parameters OK 15:55:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:50 Set A/D data flow result=40 15:55:50 Set A/D channel type result=40 15:55:50 Set A/D encoding result=40 15:55:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:50 Set channel filter=0.000000e+000 result=40 15:55:50 Config A/D Result=40 15:55:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:50 Get A/D filter: -9.255963e+061 result=40 15:55:50 Get A/D value=-858993460 result=40 15:55:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:55:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:55:50 Aux= 15:55:50 Message to Camera, serial 121528 queued [UTC 2018-12-13 15:55:52] 15:56:27 Received message from Master: op=PointingHead serial=121541 15:56:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:56:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:56:27 Point started: ret=0 15:56:27 point_skyscan result=0 15:56:28 Check angles 15:56:28 SkyScan query 15:56:28 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.63<-13442 Statuses=0009 0009 15:56:28 Msec=0 True Az=152.91 Ze=-21.63 Az status=0009 Ze status=0009 15:56:28 Check angles 15:56:28 SkyScan query 15:56:29 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.63<-12042 Statuses=0009 0009 15:56:29 Msec=750 True Az=135.435 Ze=-0.63 Az status=0009 Ze status=0009 15:56:29 Check angles 15:56:29 SkyScan query 15:56:30 SkyScan query done: ret=0 az=117.57<-7838 ze=20.745<-10617 Statuses=0009 0009 15:56:30 Msec=1500 True Az=117.57 Ze=20.745 Az status=0009 Ze status=0009 15:56:30 Check angles 15:56:30 SkyScan query 15:56:31 SkyScan query done: ret=0 az=99.705<-6647 ze=42.135<-9191 Statuses=0009 0009 15:56:31 Msec=2250 True Az=99.705 Ze=42.135 Az status=0009 Ze status=0009 15:56:31 Check angles 15:56:31 SkyScan query 15:56:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:56:31 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:56:31 Check angles 15:56:31 SkyScan query 15:56:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:56:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:56:32 Message to Master queued w/err=0: serial=121541 error=0 15:56:37 Received message from Master: op=Filter serial=121542 15:56:37 Color wheel filter change from 0 to 0 15:56:37 FLIGetFilterPos err=0 currentPosition=0 15:56:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:56:37 Filter is already there-color wheel unchanged 15:56:37 Received message from Master: op=Shutter serial=121543 15:56:37 Shutter LASER close 15:56:37 Received message from Camera: op=State serial=121545 15:56:37 GetSingleValue result=40 Value=cccccccc 15:56:37 SkyScan query 15:56:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:56:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:38 Parameters OK 15:56:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:38 Set A/D data flow result=40 15:56:38 Set A/D channel type result=40 15:56:38 Set A/D encoding result=40 15:56:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:38 Set channel filter=0.000000e+000 result=40 15:56:38 Config A/D Result=40 15:56:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:38 Get A/D filter: -9.255963e+061 result=40 15:56:38 Get A/D value=-858993460 result=40 15:56:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:38 Parameters OK 15:56:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:38 Set A/D data flow result=40 15:56:38 Set A/D channel type result=40 15:56:38 Set A/D encoding result=40 15:56:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:38 Set channel filter=0.000000e+000 result=40 15:56:38 Config A/D Result=40 15:56:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:38 Get A/D filter: -9.255963e+061 result=40 15:56:38 Get A/D value=-858993460 result=40 15:56:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:56:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:56:38 Aux= 15:56:38 Message to Camera, serial 121545 queued 15:57:15 Received message from Master: op=PointingHead serial=121558 15:57:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:57:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:57:15 Point started: ret=0 15:57:15 point_skyscan result=0 15:57:16 Check angles 15:57:16 SkyScan query 15:57:16 SkyScan query done: ret=0 az=109.32<-7288 ze=38.49<-9434 Statuses=0009 0008 15:57:16 Msec=0 True Az=109.32 Ze=38.49 Az status=0009 Ze status=0008 15:57:17 Check angles 15:57:17 SkyScan query 15:57:17 SkyScan query done: ret=0 az=126.75<-8450 ze=38.49<-9434 Statuses=0009 0008 15:57:17 Msec=750 True Az=126.75 Ze=38.49 Az status=0009 Ze status=0008 15:57:17 Check angles 15:57:17 SkyScan query 15:57:18 SkyScan query done: ret=0 az=144.585<-9639 ze=38.505<-9433 Statuses=0009 0008 15:57:18 Msec=1500 True Az=144.585 Ze=38.505 Az status=0009 Ze status=0008 15:57:18 Check angles 15:57:18 SkyScan query 15:57:19 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 15:57:19 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 15:57:19 Check angles 15:57:19 SkyScan query 15:57:19 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:57:19 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:57:20 Check angles 15:57:20 SkyScan query 15:57:20 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:57:20 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:57:20 Message to Master queued w/err=0: serial=121558 error=0 15:57:25 Received message from Master: op=Filter serial=121559 15:57:25 Color wheel filter change from 0 to 0 15:57:25 FLIGetFilterPos err=0 currentPosition=0 15:57:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:57:25 Filter is already there-color wheel unchanged 15:57:25 Received message from Master: op=Shutter serial=121560 15:57:25 Shutter LASER close 15:57:25 Received message from Camera: op=State serial=121562 15:57:25 GetSingleValue result=40 Value=cccccccc 15:57:25 SkyScan query 15:57:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:57:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:26 Parameters OK 15:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:26 Set A/D data flow result=40 15:57:26 Set A/D channel type result=40 15:57:26 Set A/D encoding result=40 15:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:26 Set channel filter=0.000000e+000 result=40 15:57:26 Config A/D Result=40 15:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:26 Get A/D filter: -9.255963e+061 result=40 15:57:26 Get A/D value=-858993460 result=40 15:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:26 Parameters OK 15:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:26 Set A/D data flow result=40 15:57:26 Set A/D channel type result=40 15:57:26 Set A/D encoding result=40 15:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:26 Set channel filter=0.000000e+000 result=40 15:57:26 Config A/D Result=40 15:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:26 Get A/D filter: -9.255963e+061 result=40 15:57:26 Get A/D value=-858993460 result=40 15:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:26 Aux= 15:57:26 Message to Camera, serial 121562 queued 15:58:02 Received message from Master: op=PointingHead serial=121574 15:58:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:58:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:58:02 Point started: ret=0 15:58:02 point_skyscan result=0 15:58:03 Check angles 15:58:03 SkyScan query 15:58:03 SkyScan query done: ret=0 az=152.91<-10194 ze=8.625<-11425 Statuses=0009 0009 15:58:03 Msec=0 True Az=152.91 Ze=8.625 Az status=0009 Ze status=0009 15:58:04 Check angles 15:58:04 SkyScan query 15:58:04 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.315<-12821 Statuses=0009 0009 15:58:04 Msec=750 True Az=135.42 Ze=-12.315 Az status=0009 Ze status=0009 15:58:04 Check angles 15:58:04 SkyScan query 15:58:05 SkyScan query done: ret=0 az=117.96<-7864 ze=-33.285<-14219 Statuses=0009 0009 15:58:05 Msec=1500 True Az=117.96 Ze=-33.285 Az status=0009 Ze status=0009 15:58:05 Check angles 15:58:05 SkyScan query 15:58:06 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.525<-15435 Statuses=0009 0009 15:58:06 Msec=2250 True Az=100.425 Ze=-51.525 Az status=0009 Ze status=0009 15:58:06 Check angles 15:58:06 SkyScan query 15:58:06 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:58:06 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:58:07 Check angles 15:58:07 SkyScan query 15:58:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:58:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:58:07 Message to Master queued w/err=0: serial=121574 error=0 15:58:12 Received message from Master: op=Filter serial=121575 15:58:12 Color wheel filter change from 0 to 0 15:58:12 FLIGetFilterPos err=0 currentPosition=0 15:58:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:58:12 Filter is already there-color wheel unchanged 15:58:12 Received message from Master: op=Shutter serial=121576 15:58:12 Shutter LASER close 15:58:12 Received message from Camera: op=State serial=121578 15:58:12 GetSingleValue result=40 Value=cccccccc 15:58:12 SkyScan query 15:58:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:58:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:13 Parameters OK 15:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:13 Set A/D data flow result=40 15:58:13 Set A/D channel type result=40 15:58:13 Set A/D encoding result=40 15:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:13 Set channel filter=0.000000e+000 result=40 15:58:13 Config A/D Result=40 15:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:13 Get A/D filter: -9.255963e+061 result=40 15:58:13 Get A/D value=-858993460 result=40 15:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:13 Parameters OK 15:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:13 Set A/D data flow result=40 15:58:13 Set A/D channel type result=40 15:58:13 Set A/D encoding result=40 15:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:13 Set channel filter=0.000000e+000 result=40 15:58:13 Config A/D Result=40 15:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:13 Get A/D filter: -9.255963e+061 result=40 15:58:13 Get A/D value=-858993460 result=40 15:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:58:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:58:13 Aux= 15:58:13 Message to Camera, serial 121578 queued 15:58:50 Received message from Master: op=PointingHead serial=121591 15:58:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:58:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:58:50 Point started: ret=0 15:58:50 point_skyscan result=0 15:58:51 Check angles 15:58:51 SkyScan query 15:58:52 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.015<-17401 Statuses=0009 0009 15:58:52 Msec=0 True Az=108.795 Ze=-81.015 Az status=0009 Ze status=0009 15:58:52 Check angles 15:58:52 SkyScan query 15:58:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 15:58:52 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 15:58:52 Check angles 15:58:52 SkyScan query 15:58:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 15:58:53 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 15:58:53 Check angles 15:58:53 SkyScan query 15:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.895<-21593 Statuses=0008 0009 15:58:54 Msec=2250 True Az=112.995 Ze=-143.895 Az status=0008 Ze status=0009 15:58:54 Check angles 15:58:54 SkyScan query 15:58:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.835<-22989 Statuses=0008 0009 15:58:55 Msec=3000 True Az=112.995 Ze=-164.835 Az status=0008 Ze status=0009 15:58:55 Check angles 15:58:55 SkyScan query 15:58:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:58:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:58:55 Message to Master queued w/err=0: serial=121591 error=0 15:59:00 Received message from Master: op=Filter serial=121592 15:59:00 Color wheel filter change from 0 to 0 15:59:00 FLIGetFilterPos err=0 currentPosition=0 15:59:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:59:00 Filter is already there-color wheel unchanged 15:59:00 Received message from Master: op=Shutter serial=121593 15:59:00 Shutter LASER open 15:59:01 Received message from Camera: op=State serial=121595 15:59:01 GetSingleValue result=40 Value=cccccccc 15:59:01 SkyScan query 15:59:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:59:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:01 Parameters OK 15:59:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:01 Set A/D data flow result=40 15:59:01 Set A/D channel type result=40 15:59:01 Set A/D encoding result=40 15:59:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:01 Set channel filter=0.000000e+000 result=40 15:59:01 Config A/D Result=40 15:59:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:01 Get A/D filter: -9.255963e+061 result=40 15:59:01 Get A/D value=-858993460 result=40 15:59:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:01 Parameters OK 15:59:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:01 Set A/D data flow result=40 15:59:01 Set A/D channel type result=40 15:59:01 Set A/D encoding result=40 15:59:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:01 Set channel filter=0.000000e+000 result=40 15:59:01 Config A/D Result=40 15:59:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:01 Get A/D filter: -9.255963e+061 result=40 15:59:01 Get A/D value=-858993460 result=40 15:59:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:59:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:59:01 Aux= 15:59:01 Message to Camera, serial 121595 queued 15:59:10 Received message from Master: op=Shutter serial=121605 15:59:10 Shutter LASER close 15:59:10 Received message from Master: op=PointingHead serial=121609 15:59:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:59:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:59:10 Point started: ret=0 15:59:10 point_skyscan result=0 15:59:11 Check angles 15:59:11 SkyScan query 15:59:12 SkyScan query done: ret=0 az=89.595<-5973 ze=156.825<-1545 Statuses=0009 0009 15:59:12 Msec=0 True Az=89.595 Ze=156.825 Az status=0009 Ze status=0009 15:59:12 Check angles 15:59:12 SkyScan query 15:59:12 SkyScan query done: ret=0 az=72.045<-4803 ze=135.87<-2942 Statuses=0009 0009 15:59:12 Msec=750 True Az=72.045 Ze=135.87 Az status=0009 Ze status=0009 15:59:13 Check angles 15:59:13 SkyScan query 15:59:13 SkyScan query done: ret=0 az=54.735<-3649 ze=114.93<-4338 Statuses=0009 0009 15:59:13 Msec=1500 True Az=54.735 Ze=114.93 Az status=0009 Ze status=0009 15:59:13 Check angles 15:59:13 SkyScan query 15:59:14 SkyScan query done: ret=0 az=40.95<-2730 ze=93.945<-5737 Statuses=0009 0009 15:59:14 Msec=2250 True Az=40.95 Ze=93.945 Az status=0009 Ze status=0009 15:59:14 Check angles 15:59:14 SkyScan query 15:59:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.99<-7134 Statuses=0008 0009 15:59:15 Msec=3000 True Az=40.995 Ze=72.99 Az status=0008 Ze status=0009 15:59:15 Check angles 15:59:15 SkyScan query 15:59:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 15:59:15 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 15:59:16 Check angles 15:59:16 SkyScan query 15:59:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:59:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:59:16 Message to Master queued w/err=0: serial=121609 error=0 15:59:21 Received message from Master: op=Filter serial=121610 15:59:21 Color wheel filter change from 0 to 0 15:59:21 FLIGetFilterPos err=0 currentPosition=0 15:59:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:59:21 Filter is already there-color wheel unchanged 15:59:21 Received message from Master: op=Shutter serial=121611 15:59:21 Shutter LASER close 15:59:22 Received message from Camera: op=State serial=121613 15:59:22 GetSingleValue result=40 Value=cccccccc 15:59:22 SkyScan query 15:59:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:59:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:22 Parameters OK 15:59:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:22 Set A/D data flow result=40 15:59:22 Set A/D channel type result=40 15:59:22 Set A/D encoding result=40 15:59:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:22 Set channel filter=0.000000e+000 result=40 15:59:22 Config A/D Result=40 15:59:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:22 Get A/D filter: -9.255963e+061 result=40 15:59:22 Get A/D value=-858993460 result=40 15:59:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:22 Parameters OK 15:59:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:22 Set A/D data flow result=40 15:59:22 Set A/D channel type result=40 15:59:22 Set A/D encoding result=40 15:59:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:22 Set channel filter=0.000000e+000 result=40 15:59:22 Config A/D Result=40 15:59:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:22 Get A/D filter: -9.255963e+061 result=40 15:59:22 Get A/D value=-858993460 result=40 15:59:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:59:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:59:22 Aux= 15:59:22 Message to Camera, serial 121613 queued 15:59:59 Received message from Master: op=PointingHead serial=121626 15:59:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:59:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:59:59 Point started: ret=0 15:59:59 point_skyscan result=0 16:00:00 Check angles 16:00:00 SkyScan query 16:00:01 SkyScan query done: ret=0 az=64.23<-4282 ze=66.54<-7564 Statuses=0009 0008 16:00:01 Msec=0 True Az=64.23 Ze=66.54 Az status=0009 Ze status=0008 16:00:01 Check angles 16:00:01 SkyScan query 16:00:01 SkyScan query done: ret=0 az=81.615<-5441 ze=66.51<-7566 Statuses=0009 0008 16:00:01 Msec=750 True Az=81.615 Ze=66.51 Az status=0009 Ze status=0008 16:00:02 Check angles 16:00:02 SkyScan query 16:00:02 SkyScan query done: ret=0 az=99.09<-6606 ze=66.495<-7567 Statuses=0009 0008 16:00:02 Msec=1500 True Az=99.09 Ze=66.495 Az status=0009 Ze status=0008 16:00:02 Check angles 16:00:02 SkyScan query 16:00:03 SkyScan query done: ret=0 az=116.625<-7775 ze=66.495<-7567 Statuses=0009 0008 16:00:03 Msec=2250 True Az=116.625 Ze=66.495 Az status=0009 Ze status=0008 16:00:03 Check angles 16:00:03 SkyScan query 16:00:04 SkyScan query done: ret=0 az=134.04<-8936 ze=66.495<-7567 Statuses=0009 0008 16:00:04 Msec=3000 True Az=134.04 Ze=66.495 Az status=0009 Ze status=0008 16:00:04 Check angles 16:00:04 SkyScan query 16:00:04 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 16:00:04 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 16:00:05 Check angles 16:00:05 SkyScan query 16:00:05 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:00:05 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:00:05 Message to Master queued w/err=0: serial=121626 error=0 16:00:10 Received message from Master: op=Filter serial=121627 16:00:10 Color wheel filter change from 0 to 0 16:00:10 FLIGetFilterPos err=0 currentPosition=0 16:00:10 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:10 Filter is already there-color wheel unchanged 16:00:10 Received message from Master: op=Shutter serial=121628 16:00:10 Shutter LASER close 16:00:10 Received message from Camera: op=State serial=121630 16:00:10 GetSingleValue result=40 Value=cccccccc 16:00:10 SkyScan query 16:00:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:00:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:11 Parameters OK 16:00:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:11 Set A/D data flow result=40 16:00:11 Set A/D channel type result=40 16:00:11 Set A/D encoding result=40 16:00:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:11 Set channel filter=0.000000e+000 result=40 16:00:11 Config A/D Result=40 16:00:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:11 Get A/D filter: -9.255963e+061 result=40 16:00:11 Get A/D value=-858993460 result=40 16:00:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:11 Parameters OK 16:00:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:11 Set A/D data flow result=40 16:00:11 Set A/D channel type result=40 16:00:11 Set A/D encoding result=40 16:00:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:11 Set channel filter=0.000000e+000 result=40 16:00:11 Config A/D Result=40 16:00:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:11 Get A/D filter: -9.255963e+061 result=40 16:00:11 Get A/D value=-858993460 result=40 16:00:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:11 Aux= 16:00:11 Message to Camera, serial 121630 queued 16:00:48 Received message from Master: op=PointingHead serial=121643 16:00:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:00:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:00:48 Point started: ret=0 16:00:48 point_skyscan result=0 16:00:49 Check angles 16:00:49 SkyScan query 16:00:50 SkyScan query done: ret=0 az=134.805<-8987 ze=36.465<-9569 Statuses=0009 0009 16:00:50 Msec=0 True Az=134.805 Ze=36.465 Az status=0009 Ze status=0009 16:00:50 Check angles 16:00:50 SkyScan query 16:00:50 SkyScan query done: ret=0 az=117.255<-7817 ze=15.555<-10963 Statuses=0009 0009 16:00:50 Msec=750 True Az=117.255 Ze=15.555 Az status=0009 Ze status=0009 16:00:50 Check angles 16:00:50 SkyScan query 16:00:51 SkyScan query done: ret=0 az=99.57<-6638 ze=-5.865<-12391 Statuses=0009 0009 16:00:51 Msec=1500 True Az=99.57 Ze=-5.865 Az status=0009 Ze status=0009 16:00:51 Check angles 16:00:51 SkyScan query 16:00:52 SkyScan query done: ret=0 az=82.065<-5471 ze=-26.85<-13790 Statuses=0009 0009 16:00:52 Msec=2250 True Az=82.065 Ze=-26.85 Az status=0009 Ze status=0009 16:00:52 Check angles 16:00:52 SkyScan query 16:00:53 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.58<-14572 Statuses=0009 0008 16:00:53 Msec=3000 True Az=64.545 Ze=-38.58 Az status=0009 Ze status=0008 16:00:53 Check angles 16:00:53 SkyScan query 16:00:53 SkyScan query done: ret=0 az=47.145<-3143 ze=-38.52<-14568 Statuses=0009 0008 16:00:53 Msec=3750 True Az=47.145 Ze=-38.52 Az status=0009 Ze status=0008 16:00:53 Check angles 16:00:53 SkyScan query 16:00:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:00:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:00:54 Message to Master queued w/err=0: serial=121643 error=0 16:00:59 Received message from Master: op=Filter serial=121644 16:00:59 Color wheel filter change from 0 to 0 16:00:59 FLIGetFilterPos err=0 currentPosition=0 16:00:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:59 Filter is already there-color wheel unchanged 16:00:59 Received message from Master: op=Shutter serial=121645 16:00:59 Shutter LASER close 16:00:59 Received message from Camera: op=State serial=121647 16:00:59 GetSingleValue result=40 Value=cccccccc 16:00:59 SkyScan query 16:01:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:01:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:00 Parameters OK 16:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:00 Set A/D data flow result=40 16:01:00 Set A/D channel type result=40 16:01:00 Set A/D encoding result=40 16:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:00 Set channel filter=0.000000e+000 result=40 16:01:00 Config A/D Result=40 16:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:00 Get A/D filter: -9.255963e+061 result=40 16:01:00 Get A/D value=-858993460 result=40 16:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:00 Parameters OK 16:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:00 Set A/D data flow result=40 16:01:00 Set A/D channel type result=40 16:01:00 Set A/D encoding result=40 16:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:00 Set channel filter=0.000000e+000 result=40 16:01:00 Config A/D Result=40 16:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:00 Get A/D filter: -9.255963e+061 result=40 16:01:00 Get A/D value=-858993460 result=40 16:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:01:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:01:00 Aux= 16:01:00 Message to Camera, serial 121647 queued 16:01:37 Received message from Master: op=PointingHead serial=121660 16:01:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:01:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:01:37 Point started: ret=0 16:01:37 point_skyscan result=0 16:01:38 Check angles 16:01:38 SkyScan query 16:01:38 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.505<-16567 Statuses=0009 0009 16:01:38 Msec=0 True Az=64.095 Ze=-68.505 Az status=0009 Ze status=0009 16:01:39 Check angles 16:01:39 SkyScan query 16:01:39 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.31<-17954 Statuses=0009 0009 16:01:39 Msec=750 True Az=81.39 Ze=-89.31 Az status=0009 Ze status=0009 16:01:39 Check angles 16:01:39 SkyScan query 16:01:40 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.265<-19351 Statuses=0009 0009 16:01:40 Msec=1500 True Az=98.895 Ze=-110.265 Az status=0009 Ze status=0009 16:01:40 Check angles 16:01:40 SkyScan query 16:01:41 SkyScan query done: ret=0 az=116.4<-7760 ze=-131.205<-20747 Statuses=0009 0009 16:01:41 Msec=2250 True Az=116.4 Ze=-131.205 Az status=0009 Ze status=0009 16:01:41 Check angles 16:01:41 SkyScan query 16:01:41 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 16:01:41 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 16:01:42 Check angles 16:01:42 SkyScan query 16:01:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 16:01:42 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 16:01:42 Message to Master queued w/err=0: serial=121660 error=0 16:01:47 Received message from Master: op=Filter serial=121661 16:01:47 Color wheel filter change from 0 to 0 16:01:47 FLIGetFilterPos err=0 currentPosition=0 16:01:47 FLIGetStepsRemaining err=0 RemainingSteps=0 16:01:47 Filter is already there-color wheel unchanged 16:01:47 Received message from Master: op=Shutter serial=121662 16:01:47 Shutter LASER close 16:01:47 Received message from Camera: op=State serial=121664 16:01:47 GetSingleValue result=40 Value=cccccccc 16:01:47 SkyScan query 16:01:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:48 Parameters OK 16:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:48 Set A/D data flow result=40 16:01:48 Set A/D channel type result=40 16:01:48 Set A/D encoding result=40 16:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:48 Set channel filter=0.000000e+000 result=40 16:01:48 Config A/D Result=40 16:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:48 Get A/D filter: -9.255963e+061 result=40 16:01:48 Get A/D value=-858993460 result=40 16:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:48 Parameters OK 16:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:48 Set A/D data flow result=40 16:01:48 Set A/D channel type result=40 16:01:48 Set A/D encoding result=40 16:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:48 Set channel filter=0.000000e+000 result=40 16:01:48 Config A/D Result=40 16:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:48 Get A/D filter: -9.255963e+061 result=40 16:01:48 Get A/D value=-858993460 result=40 16:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:01:48 Aux= 16:01:48 Message to Camera, serial 121664 queued 16:02:25 Received message from Master: op=PointingHead serial=121677 16:02:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:02:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:02:25 Point started: ret=0 16:02:25 point_skyscan result=0 16:02:26 Check angles 16:02:26 SkyScan query 16:02:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0009 0009 16:02:26 Msec=0 True Az=112.995 Ze=-171.495 Az status=0009 Ze status=0009 16:02:27 Check angles 16:02:27 SkyScan query 16:02:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:02:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:02:27 Message to Master queued w/err=0: serial=121677 error=0 16:02:32 Received message from Master: op=Filter serial=121678 16:02:32 Color wheel filter change from 0 to 0 16:02:32 FLIGetFilterPos err=0 currentPosition=0 16:02:32 FLIGetStepsRemaining err=0 RemainingSteps=0 16:02:32 Filter is already there-color wheel unchanged 16:02:32 Received message from Master: op=Shutter serial=121679 16:02:32 Shutter LASER open 16:02:33 Received message from Camera: op=State serial=121681 16:02:33 GetSingleValue result=40 Value=cccccccc 16:02:33 SkyScan query 16:02:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:02:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:33 Parameters OK 16:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:33 Set A/D data flow result=40 16:02:33 Set A/D channel type result=40 16:02:33 Set A/D encoding result=40 16:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:33 Set channel filter=0.000000e+000 result=40 16:02:33 Config A/D Result=40 16:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:33 Get A/D filter: -9.255963e+061 result=40 16:02:33 Get A/D value=-858993460 result=40 16:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:33 Parameters OK 16:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:33 Set A/D data flow result=40 16:02:33 Set A/D channel type result=40 16:02:33 Set A/D encoding result=40 16:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:33 Set channel filter=0.000000e+000 result=40 16:02:33 Config A/D Result=40 16:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:33 Get A/D filter: -9.255963e+061 result=40 16:02:33 Get A/D value=-858993460 result=40 16:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:02:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:02:33 Aux= 16:02:33 Message to Camera, serial 121681 queued 16:02:42 Received message from Master: op=Shutter serial=121691 16:02:42 Shutter LASER close 16:02:42 Received message from Master: op=PointingHead serial=121695 16:02:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:02:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:02:42 Point started: ret=0 16:02:42 point_skyscan result=0 16:02:43 Check angles 16:02:43 SkyScan query 16:02:44 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.295<-21553 Statuses=0009 0009 16:02:44 Msec=0 True Az=135.945 Ze=-143.295 Az status=0009 Ze status=0009 16:02:44 Check angles 16:02:44 SkyScan query 16:02:45 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.89<-20126 Statuses=0009 0009 16:02:45 Msec=750 True Az=153.81 Ze=-121.89 Az status=0009 Ze status=0009 16:02:45 Check angles 16:02:45 SkyScan query 16:02:45 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.95<-18730 Statuses=0009 0009 16:02:45 Msec=1500 True Az=171.24 Ze=-100.95 Az status=0009 Ze status=0009 16:02:45 Check angles 16:02:45 SkyScan query 16:02:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 16:02:46 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 16:02:46 Check angles 16:02:46 SkyScan query 16:02:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.56<-15904 Statuses=0008 0009 16:02:47 Msec=3000 True Az=176.01 Ze=-58.56 Az status=0008 Ze status=0009 16:02:47 Check angles 16:02:47 SkyScan query 16:02:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:02:48 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:02:48 Message to Master queued w/err=0: serial=121695 error=0 16:02:53 Received message from Master: op=Filter serial=121696 16:02:53 Color wheel filter change from 0 to 0 16:02:53 FLIGetFilterPos err=0 currentPosition=0 16:02:53 FLIGetStepsRemaining err=0 RemainingSteps=0 16:02:53 Filter is already there-color wheel unchanged 16:02:53 Received message from Master: op=Shutter serial=121697 16:02:53 Shutter LASER close 16:02:53 Received message from Camera: op=State serial=121699 16:02:53 GetSingleValue result=40 Value=cccccccc 16:02:53 SkyScan query 16:02:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:02:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:54 Parameters OK 16:02:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:54 Set A/D data flow result=40 16:02:54 Set A/D channel type result=40 16:02:54 Set A/D encoding result=40 16:02:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:54 Set channel filter=0.000000e+000 result=40 16:02:54 Config A/D Result=40 16:02:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:54 Get A/D filter: -9.255963e+061 result=40 16:02:54 Get A/D value=-858993460 result=40 16:02:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:54 Parameters OK 16:02:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:54 Set A/D data flow result=40 16:02:54 Set A/D channel type result=40 16:02:54 Set A/D encoding result=40 16:02:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:54 Set channel filter=0.000000e+000 result=40 16:02:54 Config A/D Result=40 16:02:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:54 Get A/D filter: -9.255963e+061 result=40 16:02:54 Get A/D value=-858993460 result=40 16:02:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:02:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:02:54 Aux= 16:02:54 Message to Camera, serial 121699 queued 16:03:30 Received message from Master: op=PointingHead serial=121712 16:03:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:03:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:03:31 Point started: ret=0 16:03:31 point_skyscan result=0 16:03:31 Check angles 16:03:31 SkyScan query 16:03:32 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.39<-13426 Statuses=0009 0009 16:03:32 Msec=0 True Az=152.73 Ze=-21.39 Az status=0009 Ze status=0009 16:03:32 Check angles 16:03:32 SkyScan query 16:03:33 SkyScan query done: ret=0 az=135.285<-9019 ze=-0.405<-12027 Statuses=0009 0009 16:03:33 Msec=750 True Az=135.285 Ze=-0.405 Az status=0009 Ze status=0009 16:03:33 Check angles 16:03:33 SkyScan query 16:03:34 SkyScan query done: ret=0 az=117.375<-7825 ze=20.97<-10602 Statuses=0009 0009 16:03:34 Msec=1500 True Az=117.375 Ze=20.97 Az status=0009 Ze status=0009 16:03:34 Check angles 16:03:34 SkyScan query 16:03:34 SkyScan query done: ret=0 az=99.99<-6666 ze=41.925<-9205 Statuses=0009 0009 16:03:34 Msec=2250 True Az=99.99 Ze=41.925 Az status=0009 Ze status=0009 16:03:34 Check angles 16:03:34 SkyScan query 16:03:35 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:03:35 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:03:35 Check angles 16:03:35 SkyScan query 16:03:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:03:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:03:36 Message to Master queued w/err=0: serial=121712 error=0 16:03:41 Received message from Master: op=Filter serial=121713 16:03:41 Color wheel filter change from 0 to 0 16:03:41 FLIGetFilterPos err=0 currentPosition=0 16:03:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:03:41 Filter is already there-color wheel unchanged 16:03:41 Received message from Master: op=Shutter serial=121714 16:03:41 Shutter LASER close 16:03:41 Received message from Camera: op=State serial=121716 16:03:41 GetSingleValue result=40 Value=cccccccc 16:03:41 SkyScan query 16:03:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:03:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:42 Parameters OK 16:03:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:42 Set A/D data flow result=40 16:03:42 Set A/D channel type result=40 16:03:42 Set A/D encoding result=40 16:03:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:42 Set channel filter=0.000000e+000 result=40 16:03:42 Config A/D Result=40 16:03:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:42 Get A/D filter: -9.255963e+061 result=40 16:03:42 Get A/D value=-858993460 result=40 16:03:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:42 Parameters OK 16:03:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:42 Set A/D data flow result=40 16:03:42 Set A/D channel type result=40 16:03:42 Set A/D encoding result=40 16:03:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:42 Set channel filter=0.000000e+000 result=40 16:03:42 Config A/D Result=40 16:03:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:42 Get A/D filter: -9.255963e+061 result=40 16:03:42 Get A/D value=-858993460 result=40 16:03:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:03:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:03:42 Aux= 16:03:42 Message to Camera, serial 121716 queued 16:04:18 Received message from Master: op=PointingHead serial=121729 16:04:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:04:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:04:19 Point started: ret=0 16:04:19 point_skyscan result=0 16:04:20 Check angles 16:04:20 SkyScan query 16:04:20 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 16:04:20 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 16:04:20 Check angles 16:04:20 SkyScan query 16:04:21 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 16:04:21 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 16:04:21 Check angles 16:04:21 SkyScan query 16:04:22 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 16:04:22 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 16:04:22 Check angles 16:04:22 SkyScan query 16:04:22 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 16:04:22 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 16:04:23 Check angles 16:04:23 SkyScan query 16:04:23 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:04:23 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:04:23 Check angles 16:04:23 SkyScan query 16:04:24 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:04:24 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:04:24 Message to Master queued w/err=0: serial=121729 error=0 16:04:29 Received message from Master: op=Filter serial=121730 16:04:29 Color wheel filter change from 0 to 0 16:04:29 FLIGetFilterPos err=0 currentPosition=0 16:04:29 FLIGetStepsRemaining err=0 RemainingSteps=0 16:04:29 Filter is already there-color wheel unchanged 16:04:29 Received message from Master: op=Shutter serial=121731 16:04:29 Shutter LASER close 16:04:29 Received message from Camera: op=State serial=121733 16:04:29 GetSingleValue result=40 Value=cccccccc 16:04:29 SkyScan query 16:04:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:04:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:30 Parameters OK 16:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:30 Set A/D data flow result=40 16:04:30 Set A/D channel type result=40 16:04:30 Set A/D encoding result=40 16:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:30 Set channel filter=0.000000e+000 result=40 16:04:30 Config A/D Result=40 16:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:30 Get A/D filter: -9.255963e+061 result=40 16:04:30 Get A/D value=-858993460 result=40 16:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:30 Parameters OK 16:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:30 Set A/D data flow result=40 16:04:30 Set A/D channel type result=40 16:04:30 Set A/D encoding result=40 16:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:30 Set channel filter=0.000000e+000 result=40 16:04:30 Config A/D Result=40 16:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:30 Get A/D filter: -9.255963e+061 result=40 16:04:30 Get A/D value=-858993460 result=40 16:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:04:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:04:30 Aux= 16:04:30 Message to Camera, serial 121733 queued 16:05:07 Received message from Master: op=PointingHead serial=121746 16:05:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:05:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:05:07 Point started: ret=0 16:05:07 point_skyscan result=0 16:05:08 Check angles 16:05:08 SkyScan query 16:05:08 SkyScan query done: ret=0 az=152.595<-10173 ze=8.16<-11456 Statuses=0009 0009 16:05:08 Msec=0 True Az=152.595 Ze=8.16 Az status=0009 Ze status=0009 16:05:08 Check angles 16:05:08 SkyScan query 16:05:09 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.75<-12850 Statuses=0009 0009 16:05:09 Msec=750 True Az=135.12 Ze=-12.75 Az status=0009 Ze status=0009 16:05:09 Check angles 16:05:09 SkyScan query 16:05:10 SkyScan query done: ret=0 az=117.51<-7834 ze=-33.72<-14248 Statuses=0009 0009 16:05:10 Msec=1500 True Az=117.51 Ze=-33.72 Az status=0009 Ze status=0009 16:05:10 Check angles 16:05:10 SkyScan query 16:05:11 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 16:05:11 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 16:05:11 Check angles 16:05:11 SkyScan query 16:05:11 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:05:11 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:05:11 Check angles 16:05:11 SkyScan query 16:05:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:05:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:05:12 Message to Master queued w/err=0: serial=121746 error=0 16:05:17 Received message from Master: op=Filter serial=121747 16:05:17 Color wheel filter change from 0 to 0 16:05:17 FLIGetFilterPos err=0 currentPosition=0 16:05:17 FLIGetStepsRemaining err=0 RemainingSteps=0 16:05:17 Filter is already there-color wheel unchanged 16:05:17 Received message from Master: op=Shutter serial=121748 16:05:17 Shutter LASER close 16:05:17 Received message from Camera: op=State serial=121750 16:05:17 GetSingleValue result=40 Value=cccccccc 16:05:17 SkyScan query 16:05:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:05:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:18 Parameters OK 16:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:18 Set A/D data flow result=40 16:05:18 Set A/D channel type result=40 16:05:18 Set A/D encoding result=40 16:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:18 Set channel filter=0.000000e+000 result=40 16:05:18 Config A/D Result=40 16:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:18 Get A/D filter: -9.255963e+061 result=40 16:05:18 Get A/D value=-858993460 result=40 16:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:18 Parameters OK 16:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:18 Set A/D data flow result=40 16:05:18 Set A/D channel type result=40 16:05:18 Set A/D encoding result=40 16:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:18 Set channel filter=0.000000e+000 result=40 16:05:18 Config A/D Result=40 16:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:18 Get A/D filter: -9.255963e+061 result=40 16:05:18 Get A/D value=-858993460 result=40 16:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:05:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:05:18 Aux= 16:05:18 Message to Camera, serial 121750 queued 16:05:55 Received message from Master: op=PointingHead serial=121763 16:05:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:05:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:05:55 Point started: ret=0 16:05:55 point_skyscan result=0 16:05:56 Check angles 16:05:56 SkyScan query 16:05:56 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.555<-17437 Statuses=0009 0009 16:05:56 Msec=0 True Az=109.2 Ze=-81.555 Az status=0009 Ze status=0009 16:05:56 Check angles 16:05:56 SkyScan query 16:05:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.945<-18863 Statuses=0008 0009 16:05:57 Msec=750 True Az=112.995 Ze=-102.945 Az status=0008 Ze status=0009 16:05:57 Check angles 16:05:57 SkyScan query 16:05:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 16:05:58 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 16:05:58 Check angles 16:05:58 SkyScan query 16:05:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 16:05:59 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 16:05:59 Check angles 16:05:59 SkyScan query 16:05:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.215<-23081 Statuses=0008 0009 16:05:59 Msec=3000 True Az=112.995 Ze=-166.215 Az status=0008 Ze status=0009 16:06:00 Check angles 16:06:00 SkyScan query 16:06:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:06:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:06:00 Message to Master queued w/err=0: serial=121763 error=0 16:06:05 Received message from Master: op=Filter serial=121764 16:06:05 Color wheel filter change from 0 to 0 16:06:05 FLIGetFilterPos err=0 currentPosition=0 16:06:05 FLIGetStepsRemaining err=0 RemainingSteps=0 16:06:05 Filter is already there-color wheel unchanged 16:06:05 Received message from Master: op=Shutter serial=121765 16:06:05 Shutter LASER open 16:06:05 Received message from Camera: op=State serial=121767 16:06:05 GetSingleValue result=40 Value=cccccccc 16:06:05 SkyScan query 16:06:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:06:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:06 Parameters OK 16:06:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:06 Set A/D data flow result=40 16:06:06 Set A/D channel type result=40 16:06:06 Set A/D encoding result=40 16:06:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:06 Set channel filter=0.000000e+000 result=40 16:06:06 Config A/D Result=40 16:06:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:06 Get A/D filter: -9.255963e+061 result=40 16:06:06 Get A/D value=-858993460 result=40 16:06:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:06 Parameters OK 16:06:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:06 Set A/D data flow result=40 16:06:06 Set A/D channel type result=40 16:06:06 Set A/D encoding result=40 16:06:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:06 Set channel filter=0.000000e+000 result=40 16:06:06 Config A/D Result=40 16:06:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:06 Get A/D filter: -9.255963e+061 result=40 16:06:06 Get A/D value=-858993460 result=40 16:06:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:06:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:06:06 Aux= 16:06:06 Message to Camera, serial 121767 queued 16:06:14 Received message from Master: op=Shutter serial=121777 16:06:14 Shutter LASER close 16:06:15 Received message from Master: op=PointingHead serial=121781 16:06:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:06:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-13 16:06:15] 16:06:15 Point started: ret=0 16:06:15 point_skyscan result=0 16:06:16 Check angles 16:06:16 SkyScan query 16:06:17 SkyScan query done: ret=0 az=88.5<-5900 ze=155.565<-1629 Statuses=0009 0009 16:06:17 Msec=0 True Az=88.5 Ze=155.565 Az status=0009 Ze status=0009 16:06:17 Check angles 16:06:17 SkyScan query 16:06:17 SkyScan query done: ret=0 az=70.98<-4732 ze=134.595<-3027 Statuses=0009 0009 16:06:17 Msec=750 True Az=70.98 Ze=134.595 Az status=0009 Ze status=0009 16:06:18 Check angles 16:06:18 SkyScan query 16:06:18 SkyScan query done: ret=0 az=53.64<-3576 ze=113.655<-4423 Statuses=0009 0009 16:06:18 Msec=1500 True Az=53.64 Ze=113.655 Az status=0009 Ze status=0009 16:06:18 Check angles 16:06:18 SkyScan query 16:06:19 SkyScan query done: ret=0 az=41.01<-2734 ze=92.7<-5820 Statuses=0009 0009 16:06:19 Msec=2250 True Az=41.01 Ze=92.7 Az status=0009 Ze status=0009 16:06:19 Check angles 16:06:19 SkyScan query 16:06:20 SkyScan query done: ret=0 az=40.995<-2733 ze=71.745<-7217 Statuses=0008 0009 16:06:20 Msec=3000 True Az=40.995 Ze=71.745 Az status=0008 Ze status=0009 16:06:20 Check angles 16:06:20 SkyScan query 16:06:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.975<-8535 Statuses=0008 0009 16:06:20 Msec=3750 True Az=40.995 Ze=51.975 Az status=0008 Ze status=0009 16:06:21 Check angles 16:06:21 SkyScan query 16:06:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:06:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:06:21 Message to Master queued w/err=0: serial=121781 error=0 16:06:26 Received message from Master: op=Filter serial=121782 16:06:26 Color wheel filter change from 0 to 0 16:06:26 FLIGetFilterPos err=0 currentPosition=0 16:06:26 FLIGetStepsRemaining err=0 RemainingSteps=0 16:06:26 Filter is already there-color wheel unchanged 16:06:26 Received message from Master: op=Shutter serial=121783 16:06:26 Shutter LASER close 16:06:26 Received message from Camera: op=State serial=121785 16:06:26 GetSingleValue result=40 Value=cccccccc 16:06:26 SkyScan query 16:06:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:06:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:27 Parameters OK 16:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:27 Set A/D data flow result=40 16:06:27 Set A/D channel type result=40 16:06:27 Set A/D encoding result=40 16:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:27 Set channel filter=0.000000e+000 result=40 16:06:27 Config A/D Result=40 16:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:27 Get A/D filter: -9.255963e+061 result=40 16:06:27 Get A/D value=-858993460 result=40 16:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:27 Parameters OK 16:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:27 Set A/D data flow result=40 16:06:27 Set A/D channel type result=40 16:06:27 Set A/D encoding result=40 16:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:27 Set channel filter=0.000000e+000 result=40 16:06:27 Config A/D Result=40 16:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:27 Get A/D filter: -9.255963e+061 result=40 16:06:27 Get A/D value=-858993460 result=40 16:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:06:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:06:27 Aux= 16:06:27 Message to Camera, serial 121785 queued 16:07:04 Received message from Master: op=PointingHead serial=121798 16:07:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:07:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:07:04 Point started: ret=0 16:07:04 point_skyscan result=0 16:07:05 Check angles 16:07:05 SkyScan query 16:07:06 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 16:07:06 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 16:07:06 Check angles 16:07:06 SkyScan query 16:07:06 SkyScan query done: ret=0 az=81.33<-5422 ze=66.495<-7567 Statuses=0009 0008 16:07:06 Msec=750 True Az=81.33 Ze=66.495 Az status=0009 Ze status=0008 16:07:06 Check angles 16:07:06 SkyScan query 16:07:07 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 16:07:07 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 16:07:07 Check angles 16:07:07 SkyScan query 16:07:08 SkyScan query done: ret=0 az=116.775<-7785 ze=66.495<-7567 Statuses=0009 0008 16:07:08 Msec=2250 True Az=116.775 Ze=66.495 Az status=0009 Ze status=0008 16:07:08 Check angles 16:07:08 SkyScan query 16:07:09 SkyScan query done: ret=0 az=134.145<-8943 ze=66.495<-7567 Statuses=0009 0008 16:07:09 Msec=3000 True Az=134.145 Ze=66.495 Az status=0009 Ze status=0008 16:07:09 Check angles 16:07:09 SkyScan query 16:07:09 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 16:07:09 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 16:07:10 Check angles 16:07:10 SkyScan query 16:07:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:07:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:07:10 Message to Master queued w/err=0: serial=121798 error=0 16:07:15 Received message from Master: op=Filter serial=121799 16:07:15 Color wheel filter change from 0 to 0 16:07:15 FLIGetFilterPos err=0 currentPosition=0 16:07:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:15 Filter is already there-color wheel unchanged 16:07:15 Received message from Master: op=Shutter serial=121800 16:07:15 Shutter LASER close 16:07:15 Received message from Camera: op=State serial=121802 16:07:15 GetSingleValue result=40 Value=cccccccc 16:07:15 SkyScan query 16:07:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:07:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:16 Parameters OK 16:07:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:16 Set A/D data flow result=40 16:07:16 Set A/D channel type result=40 16:07:16 Set A/D encoding result=40 16:07:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:16 Set channel filter=0.000000e+000 result=40 16:07:16 Config A/D Result=40 16:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:16 Get A/D filter: -9.255963e+061 result=40 16:07:16 Get A/D value=-858993460 result=40 16:07:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:16 Parameters OK 16:07:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:16 Set A/D data flow result=40 16:07:16 Set A/D channel type result=40 16:07:16 Set A/D encoding result=40 16:07:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:16 Set channel filter=0.000000e+000 result=40 16:07:16 Config A/D Result=40 16:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:16 Get A/D filter: -9.255963e+061 result=40 16:07:16 Get A/D value=-858993460 result=40 16:07:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:16 Aux= 16:07:16 Message to Camera, serial 121802 queued 16:07:53 Received message from Master: op=PointingHead serial=121815 16:07:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:07:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:07:53 Point started: ret=0 16:07:53 point_skyscan result=0 16:07:54 Check angles 16:07:54 SkyScan query 16:07:54 SkyScan query done: ret=0 az=135.045<-9003 ze=36.825<-9545 Statuses=0009 0009 16:07:54 Msec=0 True Az=135.045 Ze=36.825 Az status=0009 Ze status=0009 16:07:55 Check angles 16:07:55 SkyScan query 16:07:55 SkyScan query done: ret=0 az=117.585<-7839 ze=15.87<-10942 Statuses=0009 0009 16:07:55 Msec=750 True Az=117.585 Ze=15.87 Az status=0009 Ze status=0009 16:07:55 Check angles 16:07:55 SkyScan query 16:07:56 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.085<-12339 Statuses=0009 0009 16:07:56 Msec=1500 True Az=100.2 Ze=-5.085 Az status=0009 Ze status=0009 16:07:56 Check angles 16:07:56 SkyScan query 16:07:57 SkyScan query done: ret=0 az=82.605<-5507 ze=-26.025<-13735 Statuses=0009 0009 16:07:57 Msec=2250 True Az=82.605 Ze=-26.025 Az status=0009 Ze status=0009 16:07:57 Check angles 16:07:57 SkyScan query 16:07:57 SkyScan query done: ret=0 az=65.235<-4349 ze=-38.58<-14572 Statuses=0009 0008 16:07:57 Msec=3000 True Az=65.235 Ze=-38.58 Az status=0009 Ze status=0008 16:07:58 Check angles 16:07:58 SkyScan query 16:07:58 SkyScan query done: ret=0 az=47.775<-3185 ze=-38.52<-14568 Statuses=0009 0008 16:07:58 Msec=3750 True Az=47.775 Ze=-38.52 Az status=0009 Ze status=0008 16:07:58 Check angles 16:07:58 SkyScan query 16:07:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:07:59 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:07:59 Message to Master queued w/err=0: serial=121815 error=0 16:08:04 Received message from Master: op=Filter serial=121816 16:08:04 Color wheel filter change from 0 to 0 16:08:04 FLIGetFilterPos err=0 currentPosition=0 16:08:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:08:04 Filter is already there-color wheel unchanged 16:08:04 Received message from Master: op=Shutter serial=121817 16:08:04 Shutter LASER close 16:08:04 Received message from Camera: op=State serial=121819 16:08:04 GetSingleValue result=40 Value=cccccccc 16:08:04 SkyScan query 16:08:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:08:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:05 Parameters OK 16:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:05 Set A/D data flow result=40 16:08:05 Set A/D channel type result=40 16:08:05 Set A/D encoding result=40 16:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:05 Set channel filter=0.000000e+000 result=40 16:08:05 Config A/D Result=40 16:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:05 Get A/D filter: -9.255963e+061 result=40 16:08:05 Get A/D value=-858993460 result=40 16:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:05 Parameters OK 16:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:05 Set A/D data flow result=40 16:08:05 Set A/D channel type result=40 16:08:05 Set A/D encoding result=40 16:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:05 Set channel filter=0.000000e+000 result=40 16:08:05 Config A/D Result=40 16:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:05 Get A/D filter: -9.255963e+061 result=40 16:08:05 Get A/D value=-858993460 result=40 16:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:08:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:08:05 Aux= 16:08:05 Message to Camera, serial 121819 queued 16:08:42 Received message from Master: op=PointingHead serial=121832 16:08:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:08:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:08:42 Point started: ret=0 16:08:42 point_skyscan result=0 16:08:43 Check angles 16:08:43 SkyScan query 16:08:43 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.265<-16551 Statuses=0009 0009 16:08:43 Msec=0 True Az=63.9 Ze=-68.265 Az status=0009 Ze status=0009 16:08:43 Check angles 16:08:43 SkyScan query 16:08:44 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.265<-17951 Statuses=0009 0009 16:08:44 Msec=750 True Az=81.315 Ze=-89.265 Az status=0009 Ze status=0009 16:08:44 Check angles 16:08:44 SkyScan query 16:08:45 SkyScan query done: ret=0 az=98.805<-6587 ze=-110.19<-19346 Statuses=0009 0009 16:08:45 Msec=1500 True Az=98.805 Ze=-110.19 Az status=0009 Ze status=0009 16:08:45 Check angles 16:08:45 SkyScan query 16:08:45 SkyScan query done: ret=0 az=116.325<-7755 ze=-131.145<-20743 Statuses=0009 0009 16:08:45 Msec=2250 True Az=116.325 Ze=-131.145 Az status=0009 Ze status=0009 16:08:46 Check angles 16:08:46 SkyScan query 16:08:46 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 16:08:46 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 16:08:46 Check angles 16:08:46 SkyScan query 16:08:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:08:47 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:08:47 Message to Master queued w/err=0: serial=121832 error=0 16:08:52 Received message from Master: op=Filter serial=121833 16:08:52 Color wheel filter change from 0 to 0 16:08:52 FLIGetFilterPos err=0 currentPosition=0 16:08:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:08:52 Filter is already there-color wheel unchanged 16:08:52 Received message from Master: op=Shutter serial=121834 16:08:52 Shutter LASER close 16:08:52 Received message from Camera: op=State serial=121836 16:08:52 GetSingleValue result=40 Value=cccccccc 16:08:52 SkyScan query 16:08:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:08:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:53 Parameters OK 16:08:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:53 Set A/D data flow result=40 16:08:53 Set A/D channel type result=40 16:08:53 Set A/D encoding result=40 16:08:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:53 Set channel filter=0.000000e+000 result=40 16:08:53 Config A/D Result=40 16:08:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:53 Get A/D filter: -9.255963e+061 result=40 16:08:53 Get A/D value=-858993460 result=40 16:08:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:53 Parameters OK 16:08:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:53 Set A/D data flow result=40 16:08:53 Set A/D channel type result=40 16:08:53 Set A/D encoding result=40 16:08:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:53 Set channel filter=0.000000e+000 result=40 16:08:53 Config A/D Result=40 16:08:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:53 Get A/D filter: -9.255963e+061 result=40 16:08:53 Get A/D value=-858993460 result=40 16:08:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:08:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:08:53 Aux= 16:08:53 Message to Camera, serial 121836 queued 16:09:30 Received message from Master: op=PointingHead serial=121849 16:09:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:09:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:09:30 Point started: ret=0 16:09:30 point_skyscan result=0 16:09:31 Check angles 16:09:31 SkyScan query 16:09:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 16:09:31 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 16:09:31 Check angles 16:09:31 SkyScan query 16:09:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:09:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:09:32 Message to Master queued w/err=0: serial=121849 error=0 16:09:37 Received message from Master: op=Filter serial=121850 16:09:37 Color wheel filter change from 0 to 0 16:09:37 FLIGetFilterPos err=0 currentPosition=0 16:09:37 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:37 Filter is already there-color wheel unchanged 16:09:37 Received message from Master: op=Shutter serial=121851 16:09:37 Shutter LASER open 16:09:37 Received message from Camera: op=State serial=121853 16:09:37 GetSingleValue result=40 Value=cccccccc 16:09:37 SkyScan query 16:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:09:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:38 Parameters OK 16:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:38 Set A/D data flow result=40 16:09:38 Set A/D channel type result=40 16:09:38 Set A/D encoding result=40 16:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:38 Set channel filter=0.000000e+000 result=40 16:09:38 Config A/D Result=40 16:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:38 Get A/D filter: -9.255963e+061 result=40 16:09:38 Get A/D value=-858993460 result=40 16:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:38 Parameters OK 16:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:38 Set A/D data flow result=40 16:09:38 Set A/D channel type result=40 16:09:38 Set A/D encoding result=40 16:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:38 Set channel filter=0.000000e+000 result=40 16:09:38 Config A/D Result=40 16:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:38 Get A/D filter: -9.255963e+061 result=40 16:09:38 Get A/D value=-858993460 result=40 16:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:38 Aux= 16:09:38 Message to Camera, serial 121853 queued 16:09:45 Received message from Master: op=Shutter serial=121862 16:09:45 Shutter LASER close 16:09:46 Received message from Master: op=PointingHead serial=121866 16:09:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:09:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:09:46 Point started: ret=0 16:09:46 point_skyscan result=0 16:09:47 Check angles 16:09:47 SkyScan query 16:09:48 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.385<-21559 Statuses=0009 0009 16:09:48 Msec=0 True Az=135.855 Ze=-143.385 Az status=0009 Ze status=0009 16:09:48 Check angles 16:09:48 SkyScan query 16:09:48 SkyScan query done: ret=0 az=153.27<-10218 ze=-122.46<-20164 Statuses=0009 0009 16:09:48 Msec=750 True Az=153.27 Ze=-122.46 Az status=0009 Ze status=0009 16:09:49 Check angles 16:09:49 SkyScan query 16:09:49 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.07<-18738 Statuses=0009 0009 16:09:49 Msec=1500 True Az=171.15 Ze=-101.07 Az status=0009 Ze status=0009 16:09:49 Check angles 16:09:49 SkyScan query 16:09:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 16:09:50 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 16:09:50 Check angles 16:09:50 SkyScan query 16:09:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.23<-15882 Statuses=0008 0009 16:09:51 Msec=3000 True Az=176.01 Ze=-58.23 Az status=0008 Ze status=0009 16:09:51 Check angles 16:09:51 SkyScan query 16:09:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 16:09:51 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 16:09:51 Message to Master queued w/err=0: serial=121866 error=0 16:09:56 Received message from Master: op=Filter serial=121867 16:09:56 Color wheel filter change from 0 to 0 16:09:56 FLIGetFilterPos err=0 currentPosition=0 16:09:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:56 Filter is already there-color wheel unchanged 16:09:57 Received message from Master: op=Shutter serial=121868 16:09:57 Shutter LASER close 16:09:57 Received message from Camera: op=State serial=121870 16:09:57 GetSingleValue result=40 Value=cccccccc 16:09:57 SkyScan query 16:09:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:09:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:57 Parameters OK 16:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:57 Set A/D data flow result=40 16:09:57 Set A/D channel type result=40 16:09:57 Set A/D encoding result=40 16:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:57 Set channel filter=0.000000e+000 result=40 16:09:57 Config A/D Result=40 16:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:57 Get A/D filter: -9.255963e+061 result=40 16:09:57 Get A/D value=-858993460 result=40 16:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:57 Parameters OK 16:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:57 Set A/D data flow result=40 16:09:57 Set A/D channel type result=40 16:09:57 Set A/D encoding result=40 16:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:57 Set channel filter=0.000000e+000 result=40 16:09:57 Config A/D Result=40 16:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:57 Get A/D filter: -9.255963e+061 result=40 16:09:57 Get A/D value=-858993460 result=40 16:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:57 Aux= 16:09:57 Message to Camera, serial 121870 queued 16:10:34 Received message from Master: op=PointingHead serial=121883 16:10:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:10:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:10:35 Point started: ret=0 16:10:35 point_skyscan result=0 16:10:35 Check angles 16:10:35 SkyScan query 16:10:36 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.99<-13466 Statuses=0009 0009 16:10:36 Msec=0 True Az=153.18 Ze=-21.99 Az status=0009 Ze status=0009 16:10:36 Check angles 16:10:36 SkyScan query 16:10:37 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.54<-12036 Statuses=0009 0009 16:10:37 Msec=750 True Az=135.36 Ze=-0.54 Az status=0009 Ze status=0009 16:10:37 Check angles 16:10:37 SkyScan query 16:10:37 SkyScan query done: ret=0 az=117.495<-7833 ze=20.85<-10610 Statuses=0009 0009 16:10:37 Msec=1500 True Az=117.495 Ze=20.85 Az status=0009 Ze status=0009 16:10:38 Check angles 16:10:38 SkyScan query 16:10:38 SkyScan query done: ret=0 az=100.125<-6675 ze=41.805<-9213 Statuses=0009 0009 16:10:38 Msec=2250 True Az=100.125 Ze=41.805 Az status=0009 Ze status=0009 16:10:38 Check angles 16:10:38 SkyScan query 16:10:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 16:10:39 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 16:10:39 Check angles 16:10:39 SkyScan query 16:10:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 16:10:40 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 16:10:40 Message to Master queued w/err=0: serial=121883 error=0 16:10:45 Received message from Master: op=Filter serial=121884 16:10:45 Color wheel filter change from 0 to 0 16:10:45 FLIGetFilterPos err=0 currentPosition=0 16:10:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:10:45 Filter is already there-color wheel unchanged 16:10:45 Received message from Master: op=Shutter serial=121885 16:10:45 Shutter LASER close 16:10:45 Received message from Camera: op=State serial=121887 16:10:45 GetSingleValue result=40 Value=cccccccc 16:10:45 SkyScan query 16:10:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:10:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:45 Parameters OK 16:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:45 Set A/D data flow result=40 16:10:45 Set A/D channel type result=40 16:10:45 Set A/D encoding result=40 16:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:45 Set channel filter=0.000000e+000 result=40 16:10:45 Config A/D Result=40 16:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:45 Get A/D filter: -9.255963e+061 result=40 16:10:45 Get A/D value=-858993460 result=40 16:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:45 Parameters OK 16:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:45 Set A/D data flow result=40 16:10:45 Set A/D channel type result=40 16:10:45 Set A/D encoding result=40 16:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:45 Set channel filter=0.000000e+000 result=40 16:10:45 Config A/D Result=40 16:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:45 Get A/D filter: -9.255963e+061 result=40 16:10:45 Get A/D value=-858993460 result=40 16:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:10:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:10:45 Aux= 16:10:45 Message to Camera, serial 121887 queued 16:11:22 Received message from Master: op=PointingHead serial=121900 16:11:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:11:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:11:23 Point started: ret=0 16:11:23 point_skyscan result=0 16:11:23 Check angles 16:11:23 SkyScan query 16:11:24 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 16:11:24 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 16:11:24 Check angles 16:11:24 SkyScan query 16:11:25 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 16:11:25 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 16:11:25 Check angles 16:11:25 SkyScan query 16:11:25 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 16:11:25 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 16:11:26 Check angles 16:11:26 SkyScan query 16:11:26 SkyScan query done: ret=0 az=161.88<-10792 ze=38.505<-9433 Statuses=0009 0008 16:11:26 Msec=2250 True Az=161.88 Ze=38.505 Az status=0009 Ze status=0008 16:11:26 Check angles 16:11:26 SkyScan query 16:11:27 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:11:27 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:11:27 Check angles 16:11:27 SkyScan query 16:11:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:11:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:11:28 Message to Master queued w/err=0: serial=121900 error=0 16:11:33 Received message from Master: op=Filter serial=121901 16:11:33 Color wheel filter change from 0 to 0 16:11:33 FLIGetFilterPos err=0 currentPosition=0 16:11:33 FLIGetStepsRemaining err=0 RemainingSteps=0 16:11:33 Filter is already there-color wheel unchanged 16:11:33 Received message from Master: op=Shutter serial=121902 16:11:33 Shutter LASER close 16:11:33 Received message from Camera: op=State serial=121904 16:11:33 GetSingleValue result=40 Value=cccccccc 16:11:33 SkyScan query 16:11:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:11:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:34 Parameters OK 16:11:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:34 Set A/D data flow result=40 16:11:34 Set A/D channel type result=40 16:11:34 Set A/D encoding result=40 16:11:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:34 Set channel filter=0.000000e+000 result=40 16:11:34 Config A/D Result=40 16:11:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:34 Get A/D filter: -9.255963e+061 result=40 16:11:34 Get A/D value=-858993460 result=40 16:11:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:34 Parameters OK 16:11:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:34 Set A/D data flow result=40 16:11:34 Set A/D channel type result=40 16:11:34 Set A/D encoding result=40 16:11:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:34 Set channel filter=0.000000e+000 result=40 16:11:34 Config A/D Result=40 16:11:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:34 Get A/D filter: -9.255963e+061 result=40 16:11:34 Get A/D value=-858993460 result=40 16:11:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:11:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:11:34 Aux= 16:11:34 Message to Camera, serial 121904 queued 16:12:10 Received message from Master: op=PointingHead serial=121917 16:12:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:12:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:12:11 Point started: ret=0 16:12:11 point_skyscan result=0 16:12:11 Check angles 16:12:11 SkyScan query 16:12:12 SkyScan query done: ret=0 az=152.76<-10184 ze=8.505<-11433 Statuses=0009 0009 16:12:12 Msec=0 True Az=152.76 Ze=8.505 Az status=0009 Ze status=0009 16:12:12 Check angles 16:12:12 SkyScan query 16:12:13 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.405<-12827 Statuses=0009 0009 16:12:13 Msec=750 True Az=135.435 Ze=-12.405 Az status=0009 Ze status=0009 16:12:13 Check angles 16:12:13 SkyScan query 16:12:14 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.39<-14226 Statuses=0009 0009 16:12:14 Msec=1500 True Az=117.825 Ze=-33.39 Az status=0009 Ze status=0009 16:12:14 Check angles 16:12:14 SkyScan query 16:12:14 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 16:12:14 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 16:12:14 Check angles 16:12:14 SkyScan query 16:12:15 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:12:15 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:12:15 Check angles 16:12:15 SkyScan query 16:12:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:12:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:12:16 Message to Master queued w/err=0: serial=121917 error=0 16:12:21 Received message from Master: op=Filter serial=121918 16:12:21 Color wheel filter change from 0 to 0 16:12:21 FLIGetFilterPos err=0 currentPosition=0 16:12:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:12:21 Filter is already there-color wheel unchanged 16:12:21 Received message from Master: op=Shutter serial=121919 16:12:21 Shutter LASER close 16:12:21 Received message from Camera: op=State serial=121921 16:12:21 GetSingleValue result=40 Value=cccccccc 16:12:21 SkyScan query 16:12:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:12:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:22 Parameters OK 16:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:22 Set A/D data flow result=40 16:12:22 Set A/D channel type result=40 16:12:22 Set A/D encoding result=40 16:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:22 Set channel filter=0.000000e+000 result=40 16:12:22 Config A/D Result=40 16:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:22 Get A/D filter: -9.255963e+061 result=40 16:12:22 Get A/D value=-858993460 result=40 16:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:22 Parameters OK 16:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:22 Set A/D data flow result=40 16:12:22 Set A/D channel type result=40 16:12:22 Set A/D encoding result=40 16:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:22 Set channel filter=0.000000e+000 result=40 16:12:22 Config A/D Result=40 16:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:22 Get A/D filter: -9.255963e+061 result=40 16:12:22 Get A/D value=-858993460 result=40 16:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:12:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:12:22 Aux= 16:12:22 Message to Camera, serial 121921 queued 16:12:58 Received message from Master: op=PointingHead serial=121934 16:12:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:12:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:12:59 Point started: ret=0 16:12:59 point_skyscan result=0 16:13:00 Check angles 16:13:00 SkyScan query 16:13:00 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.255<-17417 Statuses=0009 0009 16:13:00 Msec=0 True Az=108.96 Ze=-81.255 Az status=0009 Ze status=0009 16:13:00 Check angles 16:13:00 SkyScan query 16:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 16:13:01 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 16:13:01 Check angles 16:13:01 SkyScan query 16:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.165<-20211 Statuses=0008 0009 16:13:02 Msec=1500 True Az=112.995 Ze=-123.165 Az status=0008 Ze status=0009 16:13:02 Check angles 16:13:02 SkyScan query 16:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.24<-21616 Statuses=0008 0009 16:13:02 Msec=2250 True Az=112.995 Ze=-144.24 Az status=0008 Ze status=0009 16:13:03 Check angles 16:13:03 SkyScan query 16:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 16:13:03 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 16:13:03 Check angles 16:13:03 SkyScan query 16:13:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:13:04 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:13:04 Message to Master queued w/err=0: serial=121934 error=0 16:13:09 Received message from Master: op=Filter serial=121935 16:13:09 Color wheel filter change from 0 to 0 16:13:09 FLIGetFilterPos err=0 currentPosition=0 16:13:09 FLIGetStepsRemaining err=0 RemainingSteps=0 16:13:09 Filter is already there-color wheel unchanged 16:13:09 Received message from Master: op=Shutter serial=121936 16:13:09 Shutter LASER open 16:13:09 Received message from Camera: op=State serial=121938 16:13:09 GetSingleValue result=40 Value=cccccccc 16:13:09 SkyScan query 16:13:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:13:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:10 Parameters OK 16:13:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:10 Set A/D data flow result=40 16:13:10 Set A/D channel type result=40 16:13:10 Set A/D encoding result=40 16:13:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:10 Set channel filter=0.000000e+000 result=40 16:13:10 Config A/D Result=40 16:13:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:10 Get A/D filter: -9.255963e+061 result=40 16:13:10 Get A/D value=-858993460 result=40 16:13:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:10 Parameters OK 16:13:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:10 Set A/D data flow result=40 16:13:10 Set A/D channel type result=40 16:13:10 Set A/D encoding result=40 16:13:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:10 Set channel filter=0.000000e+000 result=40 16:13:10 Config A/D Result=40 16:13:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:10 Get A/D filter: -9.255963e+061 result=40 16:13:10 Get A/D value=-858993460 result=40 16:13:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:10 Aux= 16:13:10 Message to Camera, serial 121938 queued 16:13:18 Received message from Master: op=Shutter serial=121948 16:13:18 Shutter LASER close 16:13:19 Received message from Master: op=PointingHead serial=121952 16:13:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:13:19 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:13:19 Point started: ret=0 16:13:19 point_skyscan result=0 16:13:20 Check angles 16:13:20 SkyScan query 16:13:20 SkyScan query done: ret=0 az=90.09<-6006 ze=157.41<-1506 Statuses=0009 0009 16:13:20 Msec=0 True Az=90.09 Ze=157.41 Az status=0009 Ze status=0009 16:13:20 Check angles 16:13:20 SkyScan query 16:13:21 SkyScan query done: ret=0 az=72.615<-4841 ze=136.44<-2904 Statuses=0009 0009 16:13:21 Msec=750 True Az=72.615 Ze=136.44 Az status=0009 Ze status=0009 16:13:21 Check angles 16:13:21 SkyScan query 16:13:22 SkyScan query done: ret=0 az=55.125<-3675 ze=115.515<-4299 Statuses=0009 0009 16:13:22 Msec=1500 True Az=55.125 Ze=115.515 Az status=0009 Ze status=0009 16:13:22 Check angles 16:13:22 SkyScan query 16:13:23 SkyScan query done: ret=0 az=40.95<-2730 ze=94.515<-5699 Statuses=0009 0009 16:13:23 Msec=2250 True Az=40.95 Ze=94.515 Az status=0009 Ze status=0009 16:13:23 Check angles 16:13:23 SkyScan query 16:13:23 SkyScan query done: ret=0 az=40.995<-2733 ze=73.14<-7124 Statuses=0008 0009 16:13:23 Msec=3000 True Az=40.995 Ze=73.14 Az status=0008 Ze status=0009 16:13:23 Check angles 16:13:23 SkyScan query 16:13:24 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 16:13:24 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 16:13:24 Check angles 16:13:24 SkyScan query 16:13:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:13:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:13:25 Message to Master queued w/err=0: serial=121952 error=0 16:13:30 Received message from Master: op=Filter serial=121953 16:13:30 Color wheel filter change from 0 to 0 16:13:30 FLIGetFilterPos err=0 currentPosition=0 16:13:30 FLIGetStepsRemaining err=0 RemainingSteps=0 16:13:30 Filter is already there-color wheel unchanged 16:13:30 Received message from Master: op=Shutter serial=121954 16:13:30 Shutter LASER close 16:13:30 Received message from Camera: op=State serial=121956 16:13:30 GetSingleValue result=40 Value=cccccccc 16:13:30 SkyScan query 16:13:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:13:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:31 Parameters OK 16:13:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:31 Set A/D data flow result=40 16:13:31 Set A/D channel type result=40 16:13:31 Set A/D encoding result=40 16:13:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:31 Set channel filter=0.000000e+000 result=40 16:13:31 Config A/D Result=40 16:13:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:31 Get A/D filter: -9.255963e+061 result=40 16:13:31 Get A/D value=-858993460 result=40 16:13:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:31 Parameters OK 16:13:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:31 Set A/D data flow result=40 16:13:31 Set A/D channel type result=40 16:13:31 Set A/D encoding result=40 16:13:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:31 Set channel filter=0.000000e+000 result=40 16:13:31 Config A/D Result=40 16:13:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:31 Get A/D filter: -9.255963e+061 result=40 16:13:31 Get A/D value=-858993460 result=40 16:13:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:31 Aux= 16:13:31 Message to Camera, serial 121956 queued 16:14:08 Received message from Master: op=PointingHead serial=121969 16:14:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:14:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:14:08 Point started: ret=0 16:14:08 point_skyscan result=0 16:14:09 Check angles 16:14:09 SkyScan query 16:14:09 SkyScan query done: ret=0 az=64.425<-4295 ze=66.555<-7563 Statuses=0009 0008 16:14:09 Msec=0 True Az=64.425 Ze=66.555 Az status=0009 Ze status=0008 16:14:10 Check angles 16:14:10 SkyScan query 16:14:10 SkyScan query done: ret=0 az=82.32<-5488 ze=66.495<-7567 Statuses=0009 0008 16:14:10 Msec=750 True Az=82.32 Ze=66.495 Az status=0009 Ze status=0008 16:14:10 Check angles 16:14:10 SkyScan query 16:14:11 SkyScan query done: ret=0 az=99.705<-6647 ze=66.495<-7567 Statuses=0009 0008 16:14:11 Msec=1500 True Az=99.705 Ze=66.495 Az status=0009 Ze status=0008 16:14:11 Check angles 16:14:11 SkyScan query 16:14:12 SkyScan query done: ret=0 az=117.585<-7839 ze=66.495<-7567 Statuses=0009 0008 16:14:12 Msec=2250 True Az=117.585 Ze=66.495 Az status=0009 Ze status=0008 16:14:12 Check angles 16:14:12 SkyScan query 16:14:12 SkyScan query done: ret=0 az=135.42<-9028 ze=66.495<-7567 Statuses=0009 0008 16:14:12 Msec=3000 True Az=135.42 Ze=66.495 Az status=0009 Ze status=0008 16:14:13 Check angles 16:14:13 SkyScan query 16:14:13 SkyScan query done: ret=0 az=153.315<-10221 ze=66.495<-7567 Statuses=0009 0008 16:14:13 Msec=3750 True Az=153.315 Ze=66.495 Az status=0009 Ze status=0008 16:14:13 Check angles 16:14:13 SkyScan query 16:14:14 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:14:14 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:14:14 Message to Master queued w/err=0: serial=121969 error=0 16:14:19 Received message from Master: op=Filter serial=121970 16:14:19 Color wheel filter change from 0 to 0 16:14:19 FLIGetFilterPos err=0 currentPosition=0 16:14:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:19 Filter is already there-color wheel unchanged 16:14:19 Received message from Master: op=Shutter serial=121971 16:14:19 Shutter LASER close 16:14:19 Received message from Camera: op=State serial=121973 16:14:19 GetSingleValue result=40 Value=cccccccc 16:14:19 SkyScan query 16:14:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:14:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:20 Parameters OK 16:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:20 Set A/D data flow result=40 16:14:20 Set A/D channel type result=40 16:14:20 Set A/D encoding result=40 16:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:20 Set channel filter=0.000000e+000 result=40 16:14:20 Config A/D Result=40 16:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:20 Get A/D filter: -9.255963e+061 result=40 16:14:20 Get A/D value=-858993460 result=40 16:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:20 Parameters OK 16:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:20 Set A/D data flow result=40 16:14:20 Set A/D channel type result=40 16:14:20 Set A/D encoding result=40 16:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:20 Set channel filter=0.000000e+000 result=40 16:14:20 Config A/D Result=40 16:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:20 Get A/D filter: -9.255963e+061 result=40 16:14:20 Get A/D value=-858993460 result=40 16:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:20 Aux= 16:14:20 Message to Camera, serial 121973 queued 16:14:57 Received message from Master: op=PointingHead serial=121986 16:14:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:14:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:14:57 Point started: ret=0 16:14:57 point_skyscan result=0 16:14:58 Check angles 16:14:58 SkyScan query 16:14:58 SkyScan query done: ret=0 az=135.075<-9005 ze=36.72<-9552 Statuses=0009 0009 16:14:58 Msec=0 True Az=135.075 Ze=36.72 Az status=0009 Ze status=0009 16:14:58 Check angles 16:14:58 SkyScan query 16:14:59 SkyScan query done: ret=0 az=117.585<-7839 ze=15.78<-10948 Statuses=0009 0009 16:14:59 Msec=750 True Az=117.585 Ze=15.78 Az status=0009 Ze status=0009 16:14:59 Check angles 16:14:59 SkyScan query 16:15:00 SkyScan query done: ret=0 az=100.215<-6681 ze=-5.19<-12346 Statuses=0009 0009 16:15:00 Msec=1500 True Az=100.215 Ze=-5.19 Az status=0009 Ze status=0009 16:15:00 Check angles 16:15:00 SkyScan query 16:15:01 SkyScan query done: ret=0 az=82.665<-5511 ze=-26.13<-13742 Statuses=0009 0009 16:15:01 Msec=2250 True Az=82.665 Ze=-26.13 Az status=0009 Ze status=0009 16:15:01 Check angles 16:15:01 SkyScan query 16:15:01 SkyScan query done: ret=0 az=65.19<-4346 ze=-38.565<-14571 Statuses=0009 0008 16:15:01 Msec=3000 True Az=65.19 Ze=-38.565 Az status=0009 Ze status=0008 16:15:01 Check angles 16:15:01 SkyScan query 16:15:02 SkyScan query done: ret=0 az=47.715<-3181 ze=-38.535<-14569 Statuses=0009 0008 16:15:02 Msec=3750 True Az=47.715 Ze=-38.535 Az status=0009 Ze status=0008 16:15:02 Check angles 16:15:02 SkyScan query 16:15:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:15:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:15:03 Message to Master queued w/err=0: serial=121986 error=0 16:15:08 Received message from Master: op=Filter serial=121987 16:15:08 Color wheel filter change from 0 to 0 16:15:08 FLIGetFilterPos err=0 currentPosition=0 16:15:08 FLIGetStepsRemaining err=0 RemainingSteps=0 16:15:08 Filter is already there-color wheel unchanged 16:15:08 Received message from Master: op=Shutter serial=121988 16:15:08 Shutter LASER close 16:15:08 Received message from Camera: op=State serial=121990 16:15:08 GetSingleValue result=40 Value=cccccccc 16:15:08 SkyScan query 16:15:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:15:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:09 Parameters OK 16:15:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:09 Set A/D data flow result=40 16:15:09 Set A/D channel type result=40 16:15:09 Set A/D encoding result=40 16:15:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:09 Set channel filter=0.000000e+000 result=40 16:15:09 Config A/D Result=40 16:15:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:09 Get A/D filter: -9.255963e+061 result=40 16:15:09 Get A/D value=-858993460 result=40 16:15:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:09 Parameters OK 16:15:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:09 Set A/D data flow result=40 16:15:09 Set A/D channel type result=40 16:15:09 Set A/D encoding result=40 16:15:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:09 Set channel filter=0.000000e+000 result=40 16:15:09 Config A/D Result=40 16:15:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:09 Get A/D filter: -9.255963e+061 result=40 16:15:09 Get A/D value=-858993460 result=40 16:15:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:15:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:15:09 Aux= 16:15:09 Message to Camera, serial 121990 queued 16:15:27 Received message from Master: op=Identify serial=121991 16:15:45 Received message from Master: op=PointingHead serial=122006 16:15:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:15:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:15:46 Point started: ret=0 16:15:46 point_skyscan result=0 16:15:46 Check angles 16:15:46 SkyScan query 16:15:47 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.52<-16568 Statuses=0009 0009 16:15:47 Msec=0 True Az=64.23 Ze=-68.52 Az status=0009 Ze status=0009 16:15:47 Check angles 16:15:47 SkyScan query 16:15:48 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.505<-17967 Statuses=0009 0009 16:15:48 Msec=750 True Az=81.555 Ze=-89.505 Az status=0009 Ze status=0009 16:15:48 Check angles 16:15:48 SkyScan query 16:15:49 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.46<-19364 Statuses=0009 0009 16:15:49 Msec=1500 True Az=99.105 Ze=-110.46 Az status=0009 Ze status=0009 16:15:49 Check angles 16:15:49 SkyScan query 16:15:49 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.925<-20795 Statuses=0009 0009 16:15:49 Msec=2250 True Az=117.075 Ze=-131.925 Az status=0009 Ze status=0009 16:15:50 Check angles 16:15:50 SkyScan query 16:15:50 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 16:15:50 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 16:15:50 Check angles 16:15:50 SkyScan query 16:15:51 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:15:51 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:15:51 Message to Master queued w/err=0: serial=122006 error=0 [UTC 2018-12-13 16:15:52] 16:15:56 Received message from Master: op=Filter serial=122007 16:15:56 Color wheel filter change from 0 to 0 16:15:56 FLIGetFilterPos err=0 currentPosition=0 16:15:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:15:56 Filter is already there-color wheel unchanged 16:15:56 Received message from Master: op=Shutter serial=122008 16:15:56 Shutter LASER close 16:15:56 Received message from Camera: op=State serial=122010 16:15:56 GetSingleValue result=40 Value=cccccccc 16:15:56 SkyScan query 16:15:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:15:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:57 Parameters OK 16:15:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:57 Set A/D data flow result=40 16:15:57 Set A/D channel type result=40 16:15:57 Set A/D encoding result=40 16:15:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:57 Set channel filter=0.000000e+000 result=40 16:15:57 Config A/D Result=40 16:15:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:57 Get A/D filter: -9.255963e+061 result=40 16:15:57 Get A/D value=-858993460 result=40 16:15:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:57 Parameters OK 16:15:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:57 Set A/D data flow result=40 16:15:57 Set A/D channel type result=40 16:15:57 Set A/D encoding result=40 16:15:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:57 Set channel filter=0.000000e+000 result=40 16:15:57 Config A/D Result=40 16:15:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:57 Get A/D filter: -9.255963e+061 result=40 16:15:57 Get A/D value=-858993460 result=40 16:15:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:15:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:15:57 Aux= 16:15:57 Message to Camera, serial 122010 queued 16:16:33 Received message from Master: op=PointingHead serial=122023 16:16:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:16:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:16:34 Point started: ret=0 16:16:34 point_skyscan result=0 16:16:35 Check angles 16:16:35 SkyScan query 16:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 16:16:35 Msec=0 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 16:16:35 Check angles 16:16:35 SkyScan query 16:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:16:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:16:36 Message to Master queued w/err=0: serial=122023 error=0 16:16:41 Received message from Master: op=Filter serial=122024 16:16:41 Color wheel filter change from 0 to 0 16:16:41 FLIGetFilterPos err=0 currentPosition=0 16:16:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:41 Filter is already there-color wheel unchanged 16:16:41 Received message from Master: op=Shutter serial=122025 16:16:41 Shutter LASER open 16:16:41 Received message from Camera: op=State serial=122027 16:16:41 GetSingleValue result=40 Value=cccccccc 16:16:41 SkyScan query 16:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:16:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:42 Parameters OK 16:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:42 Set A/D data flow result=40 16:16:42 Set A/D channel type result=40 16:16:42 Set A/D encoding result=40 16:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:42 Set channel filter=0.000000e+000 result=40 16:16:42 Config A/D Result=40 16:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:42 Get A/D filter: -9.255963e+061 result=40 16:16:42 Get A/D value=-858993460 result=40 16:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:42 Parameters OK 16:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:42 Set A/D data flow result=40 16:16:42 Set A/D channel type result=40 16:16:42 Set A/D encoding result=40 16:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:42 Set channel filter=0.000000e+000 result=40 16:16:42 Config A/D Result=40 16:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:42 Get A/D filter: -9.255963e+061 result=40 16:16:42 Get A/D value=-858993460 result=40 16:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:42 Aux= 16:16:42 Message to Camera, serial 122027 queued 16:16:50 Received message from Master: op=Shutter serial=122037 16:16:50 Shutter LASER close 16:16:51 Received message from Master: op=PointingHead serial=122041 16:16:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:16:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:16:51 Point started: ret=0 16:16:51 point_skyscan result=0 16:16:52 Check angles 16:16:52 SkyScan query 16:16:53 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.43<-21562 Statuses=0009 0009 16:16:53 Msec=0 True Az=135.765 Ze=-143.43 Az status=0009 Ze status=0009 16:16:53 Check angles 16:16:53 SkyScan query 16:16:53 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.025<-20135 Statuses=0009 0009 16:16:53 Msec=750 True Az=153.63 Ze=-122.025 Az status=0009 Ze status=0009 16:16:53 Check angles 16:16:53 SkyScan query 16:16:54 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.115<-18741 Statuses=0009 0009 16:16:54 Msec=1500 True Az=171.225 Ze=-101.115 Az status=0009 Ze status=0009 16:16:54 Check angles 16:16:54 SkyScan query 16:16:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.16<-17344 Statuses=0008 0009 16:16:55 Msec=2250 True Az=176.01 Ze=-80.16 Az status=0008 Ze status=0009 16:16:55 Check angles 16:16:55 SkyScan query 16:16:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.71<-15914 Statuses=0008 0009 16:16:56 Msec=3000 True Az=176.01 Ze=-58.71 Az status=0008 Ze status=0009 16:16:56 Check angles 16:16:56 SkyScan query 16:16:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:16:56 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:16:56 Message to Master queued w/err=0: serial=122041 error=0 16:17:01 Received message from Master: op=Filter serial=122042 16:17:01 Color wheel filter change from 0 to 0 16:17:01 FLIGetFilterPos err=0 currentPosition=0 16:17:01 FLIGetStepsRemaining err=0 RemainingSteps=0 16:17:01 Filter is already there-color wheel unchanged 16:17:02 Received message from Master: op=Shutter serial=122043 16:17:02 Shutter LASER close 16:17:02 Received message from Camera: op=State serial=122045 16:17:02 GetSingleValue result=40 Value=cccccccc 16:17:02 SkyScan query 16:17:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:17:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:02 Parameters OK 16:17:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:02 Set A/D data flow result=40 16:17:02 Set A/D channel type result=40 16:17:02 Set A/D encoding result=40 16:17:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:02 Set channel filter=0.000000e+000 result=40 16:17:02 Config A/D Result=40 16:17:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:02 Get A/D filter: -9.255963e+061 result=40 16:17:02 Get A/D value=-858993460 result=40 16:17:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:02 Parameters OK 16:17:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:02 Set A/D data flow result=40 16:17:02 Set A/D channel type result=40 16:17:02 Set A/D encoding result=40 16:17:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:02 Set channel filter=0.000000e+000 result=40 16:17:02 Config A/D Result=40 16:17:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:02 Get A/D filter: -9.255963e+061 result=40 16:17:02 Get A/D value=-858993460 result=40 16:17:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:17:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:17:02 Aux= 16:17:02 Message to Camera, serial 122045 queued 16:17:39 Received message from Master: op=PointingHead serial=122058 16:17:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:17:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:17:39 Point started: ret=0 16:17:39 point_skyscan result=0 16:17:40 Check angles 16:17:40 SkyScan query 16:17:41 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.975<-13465 Statuses=0009 0009 16:17:41 Msec=0 True Az=153.18 Ze=-21.975 Az status=0009 Ze status=0009 16:17:41 Check angles 16:17:41 SkyScan query 16:17:42 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.975<-12065 Statuses=0009 0009 16:17:42 Msec=750 True Az=135.735 Ze=-0.975 Az status=0009 Ze status=0009 16:17:42 Check angles 16:17:42 SkyScan query 16:17:42 SkyScan query done: ret=0 az=118.14<-7876 ze=19.965<-10669 Statuses=0009 0009 16:17:42 Msec=1500 True Az=118.14 Ze=19.965 Az status=0009 Ze status=0009 16:17:42 Check angles 16:17:42 SkyScan query 16:17:43 SkyScan query done: ret=0 az=100.755<-6717 ze=40.92<-9272 Statuses=0009 0009 16:17:43 Msec=2250 True Az=100.755 Ze=40.92 Az status=0009 Ze status=0009 16:17:43 Check angles 16:17:43 SkyScan query 16:17:44 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:17:44 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:17:44 Check angles 16:17:44 SkyScan query 16:17:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:17:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:17:45 Message to Master queued w/err=0: serial=122058 error=0 16:17:50 Received message from Master: op=Filter serial=122059 16:17:50 Color wheel filter change from 0 to 0 16:17:50 FLIGetFilterPos err=0 currentPosition=0 16:17:50 FLIGetStepsRemaining err=0 RemainingSteps=0 16:17:50 Filter is already there-color wheel unchanged 16:17:50 Received message from Master: op=Shutter serial=122060 16:17:50 Shutter LASER close 16:17:50 Received message from Camera: op=State serial=122062 16:17:50 GetSingleValue result=40 Value=cccccccc 16:17:50 SkyScan query 16:17:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:17:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:50 Parameters OK 16:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:50 Set A/D data flow result=40 16:17:50 Set A/D channel type result=40 16:17:50 Set A/D encoding result=40 16:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:50 Set channel filter=0.000000e+000 result=40 16:17:50 Config A/D Result=40 16:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:50 Get A/D filter: -9.255963e+061 result=40 16:17:50 Get A/D value=-858993460 result=40 16:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:50 Parameters OK 16:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:50 Set A/D data flow result=40 16:17:50 Set A/D channel type result=40 16:17:50 Set A/D encoding result=40 16:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:50 Set channel filter=0.000000e+000 result=40 16:17:50 Config A/D Result=40 16:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:50 Get A/D filter: -9.255963e+061 result=40 16:17:50 Get A/D value=-858993460 result=40 16:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:17:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:17:50 Aux= 16:17:50 Message to Camera, serial 122062 queued 16:18:27 Received message from Master: op=PointingHead serial=122075 16:18:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:18:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:18:27 Point started: ret=0 16:18:27 point_skyscan result=0 16:18:28 Check angles 16:18:28 SkyScan query 16:18:29 SkyScan query done: ret=0 az=108.825<-7255 ze=38.49<-9434 Statuses=0009 0008 16:18:29 Msec=0 True Az=108.825 Ze=38.49 Az status=0009 Ze status=0008 16:18:29 Check angles 16:18:29 SkyScan query 16:18:30 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 16:18:30 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 16:18:30 Check angles 16:18:30 SkyScan query 16:18:30 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 16:18:30 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 16:18:30 Check angles 16:18:30 SkyScan query 16:18:31 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 16:18:31 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 16:18:31 Check angles 16:18:31 SkyScan query 16:18:32 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:18:32 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:18:32 Check angles 16:18:32 SkyScan query 16:18:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:18:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:18:33 Message to Master queued w/err=0: serial=122075 error=0 16:18:38 Received message from Master: op=Filter serial=122076 16:18:38 Color wheel filter change from 0 to 0 16:18:38 FLIGetFilterPos err=0 currentPosition=0 16:18:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:18:38 Filter is already there-color wheel unchanged 16:18:38 Received message from Master: op=Shutter serial=122077 16:18:38 Shutter LASER close 16:18:38 Received message from Camera: op=State serial=122079 16:18:38 GetSingleValue result=40 Value=cccccccc 16:18:38 SkyScan query 16:18:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:18:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:38 Parameters OK 16:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:38 Set A/D data flow result=40 16:18:38 Set A/D channel type result=40 16:18:38 Set A/D encoding result=40 16:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:38 Set channel filter=0.000000e+000 result=40 16:18:38 Config A/D Result=40 16:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:38 Get A/D filter: -9.255963e+061 result=40 16:18:38 Get A/D value=-858993460 result=40 16:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:38 Parameters OK 16:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:38 Set A/D data flow result=40 16:18:38 Set A/D channel type result=40 16:18:38 Set A/D encoding result=40 16:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:38 Set channel filter=0.000000e+000 result=40 16:18:38 Config A/D Result=40 16:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:38 Get A/D filter: -9.255963e+061 result=40 16:18:38 Get A/D value=-858993460 result=40 16:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:18:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:18:38 Aux= 16:18:38 Message to Camera, serial 122079 queued 16:19:14 Received message from Master: op=PointingHead serial=122091 16:19:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:19:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:19:15 Point started: ret=0 16:19:15 point_skyscan result=0 16:19:15 Check angles 16:19:15 SkyScan query 16:19:16 SkyScan query done: ret=0 az=153.225<-10215 ze=8.925<-11405 Statuses=0009 0009 16:19:16 Msec=0 True Az=153.225 Ze=8.925 Az status=0009 Ze status=0009 16:19:16 Check angles 16:19:16 SkyScan query 16:19:17 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.42<-12828 Statuses=0009 0009 16:19:17 Msec=750 True Az=135.24 Ze=-12.42 Az status=0009 Ze status=0009 16:19:17 Check angles 16:19:17 SkyScan query 16:19:18 SkyScan query done: ret=0 az=117.87<-7858 ze=-33.405<-14227 Statuses=0009 0009 16:19:18 Msec=1500 True Az=117.87 Ze=-33.405 Az status=0009 Ze status=0009 16:19:18 Check angles 16:19:18 SkyScan query 16:19:18 SkyScan query done: ret=0 az=100.515<-6701 ze=-51.555<-15437 Statuses=0009 0009 16:19:18 Msec=2250 True Az=100.515 Ze=-51.555 Az status=0009 Ze status=0009 16:19:18 Check angles 16:19:18 SkyScan query 16:19:19 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 16:19:19 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 16:19:19 Check angles 16:19:19 SkyScan query 16:19:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:19:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:19:20 Message to Master queued w/err=0: serial=122091 error=0 16:19:25 Received message from Master: op=Filter serial=122092 16:19:25 Color wheel filter change from 0 to 0 16:19:25 FLIGetFilterPos err=0 currentPosition=0 16:19:25 FLIGetStepsRemaining err=0 RemainingSteps=0 16:19:25 Filter is already there-color wheel unchanged 16:19:25 Received message from Master: op=Shutter serial=122093 16:19:25 Shutter LASER close 16:19:25 Received message from Camera: op=State serial=122095 16:19:25 GetSingleValue result=40 Value=cccccccc 16:19:25 SkyScan query 16:19:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:19:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:26 Parameters OK 16:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:26 Set A/D data flow result=40 16:19:26 Set A/D channel type result=40 16:19:26 Set A/D encoding result=40 16:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:26 Set channel filter=0.000000e+000 result=40 16:19:26 Config A/D Result=40 16:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:26 Get A/D filter: -9.255963e+061 result=40 16:19:26 Get A/D value=-858993460 result=40 16:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:26 Parameters OK 16:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:26 Set A/D data flow result=40 16:19:26 Set A/D channel type result=40 16:19:26 Set A/D encoding result=40 16:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:26 Set channel filter=0.000000e+000 result=40 16:19:26 Config A/D Result=40 16:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:26 Get A/D filter: -9.255963e+061 result=40 16:19:26 Get A/D value=-858993460 result=40 16:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:19:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:19:26 Aux= 16:19:26 Message to Camera, serial 122095 queued 16:20:02 Received message from Master: op=PointingHead serial=122108 16:20:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:20:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:20:03 Point started: ret=0 16:20:03 point_skyscan result=0 16:20:03 Check angles 16:20:03 SkyScan query 16:20:04 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.015<-17401 Statuses=0009 0009 16:20:04 Msec=0 True Az=108.81 Ze=-81.015 Az status=0009 Ze status=0009 16:20:04 Check angles 16:20:04 SkyScan query 16:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 16:20:05 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 16:20:05 Check angles 16:20:05 SkyScan query 16:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.375<-20225 Statuses=0008 0009 16:20:06 Msec=1500 True Az=112.995 Ze=-123.375 Az status=0008 Ze status=0009 16:20:06 Check angles 16:20:06 SkyScan query 16:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 16:20:06 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 16:20:06 Check angles 16:20:06 SkyScan query 16:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 16:20:07 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 16:20:07 Check angles 16:20:07 SkyScan query 16:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:20:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:20:08 Message to Master queued w/err=0: serial=122108 error=0 16:20:13 Received message from Master: op=Filter serial=122109 16:20:13 Color wheel filter change from 0 to 0 16:20:13 FLIGetFilterPos err=0 currentPosition=0 16:20:13 FLIGetStepsRemaining err=0 RemainingSteps=0 16:20:13 Filter is already there-color wheel unchanged 16:20:13 Received message from Master: op=Shutter serial=122110 16:20:13 Shutter LASER open 16:20:13 Received message from Camera: op=State serial=122112 16:20:13 GetSingleValue result=40 Value=cccccccc 16:20:13 SkyScan query 16:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:20:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:14 Parameters OK 16:20:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:14 Set A/D data flow result=40 16:20:14 Set A/D channel type result=40 16:20:14 Set A/D encoding result=40 16:20:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:14 Set channel filter=0.000000e+000 result=40 16:20:14 Config A/D Result=40 16:20:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:14 Get A/D filter: -9.255963e+061 result=40 16:20:14 Get A/D value=-858993460 result=40 16:20:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:14 Parameters OK 16:20:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:14 Set A/D data flow result=40 16:20:14 Set A/D channel type result=40 16:20:14 Set A/D encoding result=40 16:20:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:14 Set channel filter=0.000000e+000 result=40 16:20:14 Config A/D Result=40 16:20:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:14 Get A/D filter: -9.255963e+061 result=40 16:20:14 Get A/D value=-858993460 result=40 16:20:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:20:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:20:14 Aux= 16:20:14 Message to Camera, serial 122112 queued 16:20:22 Received message from Master: op=Shutter serial=122122 16:20:22 Shutter LASER close 16:20:23 Received message from Master: op=PointingHead serial=122126 16:20:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:20:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:20:23 Point started: ret=0 16:20:23 point_skyscan result=0 16:20:24 Check angles 16:20:24 SkyScan query 16:20:24 SkyScan query done: ret=0 az=89.58<-5972 ze=156.72<-1552 Statuses=0009 0009 16:20:24 Msec=0 True Az=89.58 Ze=156.72 Az status=0009 Ze status=0009 16:20:24 Check angles 16:20:24 SkyScan query 16:20:25 SkyScan query done: ret=0 az=72.015<-4801 ze=135.765<-2949 Statuses=0009 0009 16:20:25 Msec=750 True Az=72.015 Ze=135.765 Az status=0009 Ze status=0009 16:20:25 Check angles 16:20:25 SkyScan query 16:20:26 SkyScan query done: ret=0 az=54.735<-3649 ze=114.78<-4348 Statuses=0009 0009 16:20:26 Msec=1500 True Az=54.735 Ze=114.78 Az status=0009 Ze status=0009 16:20:26 Check angles 16:20:26 SkyScan query 16:20:27 SkyScan query done: ret=0 az=40.92<-2728 ze=93.855<-5743 Statuses=0009 0009 16:20:27 Msec=2250 True Az=40.92 Ze=93.855 Az status=0009 Ze status=0009 16:20:27 Check angles 16:20:27 SkyScan query 16:20:27 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 16:20:27 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 16:20:27 Check angles 16:20:27 SkyScan query 16:20:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 16:20:28 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 16:20:28 Check angles 16:20:28 SkyScan query 16:20:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:20:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:20:29 Message to Master queued w/err=0: serial=122126 error=0 16:20:34 Received message from Master: op=Filter serial=122127 16:20:34 Color wheel filter change from 0 to 0 16:20:34 FLIGetFilterPos err=0 currentPosition=0 16:20:34 FLIGetStepsRemaining err=0 RemainingSteps=0 16:20:34 Filter is already there-color wheel unchanged 16:20:34 Received message from Master: op=Shutter serial=122128 16:20:34 Shutter LASER close 16:20:34 Received message from Camera: op=State serial=122130 16:20:34 GetSingleValue result=40 Value=cccccccc 16:20:34 SkyScan query 16:20:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:20:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:35 Parameters OK 16:20:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:35 Set A/D data flow result=40 16:20:35 Set A/D channel type result=40 16:20:35 Set A/D encoding result=40 16:20:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:35 Set channel filter=0.000000e+000 result=40 16:20:35 Config A/D Result=40 16:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:35 Get A/D filter: -9.255963e+061 result=40 16:20:35 Get A/D value=-858993460 result=40 16:20:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:35 Parameters OK 16:20:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:35 Set A/D data flow result=40 16:20:35 Set A/D channel type result=40 16:20:35 Set A/D encoding result=40 16:20:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:35 Set channel filter=0.000000e+000 result=40 16:20:35 Config A/D Result=40 16:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:35 Get A/D filter: -9.255963e+061 result=40 16:20:35 Get A/D value=-858993460 result=40 16:20:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:20:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:20:35 Aux= 16:20:35 Message to Camera, serial 122130 queued 16:21:12 Received message from Master: op=PointingHead serial=122143 16:21:12 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:21:12 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:21:12 Point started: ret=0 16:21:12 point_skyscan result=0 16:21:13 Check angles 16:21:13 SkyScan query 16:21:13 SkyScan query done: ret=0 az=64.095<-4273 ze=66.555<-7563 Statuses=0009 0008 16:21:13 Msec=0 True Az=64.095 Ze=66.555 Az status=0009 Ze status=0008 16:21:13 Check angles 16:21:13 SkyScan query 16:21:14 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 16:21:14 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 16:21:14 Check angles 16:21:14 SkyScan query 16:21:15 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 16:21:15 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 16:21:15 Check angles 16:21:15 SkyScan query 16:21:15 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 16:21:15 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 16:21:16 Check angles 16:21:16 SkyScan query 16:21:16 SkyScan query done: ret=0 az=134.085<-8939 ze=66.495<-7567 Statuses=0009 0008 16:21:16 Msec=3000 True Az=134.085 Ze=66.495 Az status=0009 Ze status=0008 16:21:16 Check angles 16:21:16 SkyScan query 16:21:17 SkyScan query done: ret=0 az=151.38<-10092 ze=66.495<-7567 Statuses=0009 0008 16:21:17 Msec=3750 True Az=151.38 Ze=66.495 Az status=0009 Ze status=0008 16:21:17 Check angles 16:21:17 SkyScan query 16:21:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:21:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:21:18 Message to Master queued w/err=0: serial=122143 error=0 16:21:23 Received message from Master: op=Filter serial=122144 16:21:23 Color wheel filter change from 0 to 0 16:21:23 FLIGetFilterPos err=0 currentPosition=0 16:21:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:21:23 Filter is already there-color wheel unchanged 16:21:23 Received message from Master: op=Shutter serial=122145 16:21:23 Shutter LASER close 16:21:23 Received message from Camera: op=State serial=122147 16:21:23 GetSingleValue result=40 Value=cccccccc 16:21:23 SkyScan query 16:21:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:21:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:24 Parameters OK 16:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:24 Set A/D data flow result=40 16:21:24 Set A/D channel type result=40 16:21:24 Set A/D encoding result=40 16:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:24 Set channel filter=0.000000e+000 result=40 16:21:24 Config A/D Result=40 16:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:24 Get A/D filter: -9.255963e+061 result=40 16:21:24 Get A/D value=-858993460 result=40 16:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:24 Parameters OK 16:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:24 Set A/D data flow result=40 16:21:24 Set A/D channel type result=40 16:21:24 Set A/D encoding result=40 16:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:24 Set channel filter=0.000000e+000 result=40 16:21:24 Config A/D Result=40 16:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:24 Get A/D filter: -9.255963e+061 result=40 16:21:24 Get A/D value=-858993460 result=40 16:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:21:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:21:24 Aux= 16:21:24 Message to Camera, serial 122147 queued 16:22:00 Received message from Master: op=PointingHead serial=122160 16:22:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:22:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:22:01 Point started: ret=0 16:22:01 point_skyscan result=0 16:22:01 Check angles 16:22:01 SkyScan query 16:22:02 SkyScan query done: ret=0 az=135.06<-9004 ze=36.75<-9550 Statuses=0009 0009 16:22:02 Msec=0 True Az=135.06 Ze=36.75 Az status=0009 Ze status=0009 16:22:02 Check angles 16:22:02 SkyScan query 16:22:03 SkyScan query done: ret=0 az=117.57<-7838 ze=15.81<-10946 Statuses=0009 0009 16:22:03 Msec=750 True Az=117.57 Ze=15.81 Az status=0009 Ze status=0009 16:22:03 Check angles 16:22:03 SkyScan query 16:22:04 SkyScan query done: ret=0 az=100.185<-6679 ze=-5.175<-12345 Statuses=0009 0009 16:22:04 Msec=1500 True Az=100.185 Ze=-5.175 Az status=0009 Ze status=0009 16:22:04 Check angles 16:22:04 SkyScan query 16:22:04 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.115<-13741 Statuses=0009 0009 16:22:04 Msec=2250 True Az=82.65 Ze=-26.115 Az status=0009 Ze status=0009 16:22:04 Check angles 16:22:04 SkyScan query 16:22:05 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.565<-14571 Statuses=0009 0008 16:22:05 Msec=3000 True Az=64.8 Ze=-38.565 Az status=0009 Ze status=0008 16:22:05 Check angles 16:22:05 SkyScan query 16:22:06 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.52<-14568 Statuses=0009 0008 16:22:06 Msec=3750 True Az=47.025 Ze=-38.52 Az status=0009 Ze status=0008 16:22:06 Check angles 16:22:06 SkyScan query 16:22:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:22:07 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:22:07 Message to Master queued w/err=0: serial=122160 error=0 16:22:12 Received message from Master: op=Filter serial=122161 16:22:12 Color wheel filter change from 0 to 0 16:22:12 FLIGetFilterPos err=0 currentPosition=0 16:22:12 FLIGetStepsRemaining err=0 RemainingSteps=0 16:22:12 Filter is already there-color wheel unchanged 16:22:12 Received message from Master: op=Shutter serial=122162 16:22:12 Shutter LASER close 16:22:12 Received message from Camera: op=State serial=122164 16:22:12 GetSingleValue result=40 Value=cccccccc 16:22:12 SkyScan query 16:22:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:22:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:12 Parameters OK 16:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:12 Set A/D data flow result=40 16:22:12 Set A/D channel type result=40 16:22:12 Set A/D encoding result=40 16:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:12 Set channel filter=0.000000e+000 result=40 16:22:12 Config A/D Result=40 16:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:12 Get A/D filter: -9.255963e+061 result=40 16:22:12 Get A/D value=-858993460 result=40 16:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:12 Parameters OK 16:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:12 Set A/D data flow result=40 16:22:12 Set A/D channel type result=40 16:22:12 Set A/D encoding result=40 16:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:12 Set channel filter=0.000000e+000 result=40 16:22:12 Config A/D Result=40 16:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:12 Get A/D filter: -9.255963e+061 result=40 16:22:12 Get A/D value=-858993460 result=40 16:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:12 Aux= 16:22:12 Message to Camera, serial 122164 queued 16:22:49 Received message from Master: op=PointingHead serial=122177 16:22:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:22:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:22:50 Point started: ret=0 16:22:50 point_skyscan result=0 16:22:50 Check angles 16:22:50 SkyScan query 16:22:51 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.1<-16540 Statuses=0009 0009 16:22:51 Msec=0 True Az=63.885 Ze=-68.1 Az status=0009 Ze status=0009 16:22:51 Check angles 16:22:51 SkyScan query 16:22:52 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.085<-17939 Statuses=0009 0009 16:22:52 Msec=750 True Az=81.315 Ze=-89.085 Az status=0009 Ze status=0009 16:22:52 Check angles 16:22:52 SkyScan query 16:22:52 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.085<-19339 Statuses=0009 0009 16:22:52 Msec=1500 True Az=98.82 Ze=-110.085 Az status=0009 Ze status=0009 16:22:53 Check angles 16:22:53 SkyScan query 16:22:53 SkyScan query done: ret=0 az=116.22<-7748 ze=-130.995<-20733 Statuses=0009 0009 16:22:53 Msec=2250 True Az=116.22 Ze=-130.995 Az status=0009 Ze status=0009 16:22:53 Check angles 16:22:53 SkyScan query 16:22:54 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 16:22:54 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 16:22:54 Check angles 16:22:54 SkyScan query 16:22:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:22:55 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:22:55 Message to Master queued w/err=0: serial=122177 error=0 16:23:00 Received message from Master: op=Filter serial=122178 16:23:00 Color wheel filter change from 0 to 0 16:23:00 FLIGetFilterPos err=0 currentPosition=0 16:23:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:00 Filter is already there-color wheel unchanged 16:23:00 Received message from Master: op=Shutter serial=122179 16:23:00 Shutter LASER close 16:23:00 Received message from Camera: op=State serial=122181 16:23:00 GetSingleValue result=40 Value=cccccccc 16:23:00 SkyScan query 16:23:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:23:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:00 Parameters OK 16:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:00 Set A/D data flow result=40 16:23:00 Set A/D channel type result=40 16:23:00 Set A/D encoding result=40 16:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:00 Set channel filter=0.000000e+000 result=40 16:23:00 Config A/D Result=40 16:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:00 Get A/D filter: -9.255963e+061 result=40 16:23:00 Get A/D value=-858993460 result=40 16:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:00 Parameters OK 16:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:00 Set A/D data flow result=40 16:23:00 Set A/D channel type result=40 16:23:00 Set A/D encoding result=40 16:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:00 Set channel filter=0.000000e+000 result=40 16:23:00 Config A/D Result=40 16:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:00 Get A/D filter: -9.255963e+061 result=40 16:23:00 Get A/D value=-858993460 result=40 16:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:00 Aux= 16:23:00 Message to Camera, serial 122181 queued 16:23:37 Received message from Master: op=PointingHead serial=122194 16:23:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:23:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:23:38 Point started: ret=0 16:23:38 point_skyscan result=0 16:23:38 Check angles 16:23:38 SkyScan query 16:23:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.42<-23428 Statuses=0009 0009 16:23:39 Msec=0 True Az=113.01 Ze=-171.42 Az status=0009 Ze status=0009 16:23:39 Check angles 16:23:39 SkyScan query 16:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:23:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:23:40 Message to Master queued w/err=0: serial=122194 error=0 16:23:45 Received message from Master: op=Filter serial=122195 16:23:45 Color wheel filter change from 0 to 0 16:23:45 FLIGetFilterPos err=0 currentPosition=0 16:23:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:45 Filter is already there-color wheel unchanged 16:23:45 Received message from Master: op=Shutter serial=122196 16:23:45 Shutter LASER open 16:23:45 Received message from Camera: op=State serial=122198 16:23:45 GetSingleValue result=40 Value=cccccccc 16:23:45 SkyScan query 16:23:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:23:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:46 Parameters OK 16:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:46 Set A/D data flow result=40 16:23:46 Set A/D channel type result=40 16:23:46 Set A/D encoding result=40 16:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:46 Set channel filter=0.000000e+000 result=40 16:23:46 Config A/D Result=40 16:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:46 Get A/D filter: -9.255963e+061 result=40 16:23:46 Get A/D value=-858993460 result=40 16:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:46 Parameters OK 16:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:46 Set A/D data flow result=40 16:23:46 Set A/D channel type result=40 16:23:46 Set A/D encoding result=40 16:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:46 Set channel filter=0.000000e+000 result=40 16:23:46 Config A/D Result=40 16:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:46 Get A/D filter: -9.255963e+061 result=40 16:23:46 Get A/D value=-858993460 result=40 16:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:46 Aux= 16:23:46 Message to Camera, serial 122198 queued 16:23:53 Received message from Master: op=Shutter serial=122207 16:23:53 Shutter LASER close 16:23:54 Received message from Master: op=PointingHead serial=122211 16:23:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:23:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:23:54 Point started: ret=0 16:23:54 point_skyscan result=0 16:23:55 Check angles 16:23:55 SkyScan query 16:23:55 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.265<-21551 Statuses=0009 0009 16:23:55 Msec=0 True Az=135.765 Ze=-143.265 Az status=0009 Ze status=0009 16:23:56 Check angles 16:23:56 SkyScan query 16:23:56 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.415<-20161 Statuses=0009 0009 16:23:56 Msec=750 True Az=153.375 Ze=-122.415 Az status=0009 Ze status=0009 16:23:56 Check angles 16:23:56 SkyScan query 16:23:57 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.52<-18768 Statuses=0009 0009 16:23:57 Msec=1500 True Az=170.76 Ze=-101.52 Az status=0009 Ze status=0009 16:23:57 Check angles 16:23:57 SkyScan query 16:23:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.085<-17339 Statuses=0008 0009 16:23:58 Msec=2250 True Az=176.01 Ze=-80.085 Az status=0008 Ze status=0009 16:23:58 Check angles 16:23:58 SkyScan query 16:23:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.115<-15941 Statuses=0008 0009 16:23:58 Msec=3000 True Az=176.01 Ze=-59.115 Az status=0008 Ze status=0009 16:23:59 Check angles 16:23:59 SkyScan query 16:23:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 16:23:59 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 16:23:59 Message to Master queued w/err=0: serial=122211 error=0 16:24:04 Received message from Master: op=Filter serial=122212 16:24:04 Color wheel filter change from 0 to 0 16:24:04 FLIGetFilterPos err=0 currentPosition=0 16:24:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:24:04 Filter is already there-color wheel unchanged 16:24:04 Received message from Master: op=Shutter serial=122213 16:24:04 Shutter LASER close 16:24:04 Received message from Camera: op=State serial=122215 16:24:04 GetSingleValue result=40 Value=cccccccc 16:24:04 SkyScan query 16:24:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:24:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:05 Parameters OK 16:24:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:05 Set A/D data flow result=40 16:24:05 Set A/D channel type result=40 16:24:05 Set A/D encoding result=40 16:24:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:05 Set channel filter=0.000000e+000 result=40 16:24:05 Config A/D Result=40 16:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:05 Get A/D filter: -9.255963e+061 result=40 16:24:05 Get A/D value=-858993460 result=40 16:24:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:05 Parameters OK 16:24:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:05 Set A/D data flow result=40 16:24:05 Set A/D channel type result=40 16:24:05 Set A/D encoding result=40 16:24:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:05 Set channel filter=0.000000e+000 result=40 16:24:05 Config A/D Result=40 16:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:05 Get A/D filter: -9.255963e+061 result=40 16:24:05 Get A/D value=-858993460 result=40 16:24:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:24:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:24:05 Aux= 16:24:05 Message to Camera, serial 122215 queued 16:24:42 Received message from Master: op=PointingHead serial=122228 16:24:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:24:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:24:42 Point started: ret=0 16:24:42 point_skyscan result=0 16:24:43 Check angles 16:24:43 SkyScan query 16:24:44 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.705<-13447 Statuses=0009 0009 16:24:44 Msec=0 True Az=152.985 Ze=-21.705 Az status=0009 Ze status=0009 16:24:44 Check angles 16:24:44 SkyScan query 16:24:44 SkyScan query done: ret=0 az=135.6<-9040 ze=-0.705<-12047 Statuses=0009 0009 16:24:44 Msec=750 True Az=135.6 Ze=-0.705 Az status=0009 Ze status=0009 16:24:44 Check angles 16:24:44 SkyScan query 16:24:45 SkyScan query done: ret=0 az=118.035<-7869 ze=20.205<-10653 Statuses=0009 0009 16:24:45 Msec=1500 True Az=118.035 Ze=20.205 Az status=0009 Ze status=0009 16:24:45 Check angles 16:24:45 SkyScan query 16:24:46 SkyScan query done: ret=0 az=100.245<-6683 ze=41.655<-9223 Statuses=0009 0009 16:24:46 Msec=2250 True Az=100.245 Ze=41.655 Az status=0009 Ze status=0009 16:24:46 Check angles 16:24:46 SkyScan query 16:24:47 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 16:24:47 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 16:24:47 Check angles 16:24:47 SkyScan query 16:24:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:24:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:24:47 Message to Master queued w/err=0: serial=122228 error=0 16:24:52 Received message from Master: op=Filter serial=122229 16:24:52 Color wheel filter change from 0 to 0 16:24:52 FLIGetFilterPos err=0 currentPosition=0 16:24:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:24:52 Filter is already there-color wheel unchanged 16:24:52 Received message from Master: op=Shutter serial=122230 16:24:52 Shutter LASER close 16:24:53 Received message from Camera: op=State serial=122232 16:24:53 GetSingleValue result=40 Value=cccccccc 16:24:53 SkyScan query 16:24:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:24:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:53 Parameters OK 16:24:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:53 Set A/D data flow result=40 16:24:53 Set A/D channel type result=40 16:24:53 Set A/D encoding result=40 16:24:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:53 Set channel filter=0.000000e+000 result=40 16:24:53 Config A/D Result=40 16:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:53 Get A/D filter: -9.255963e+061 result=40 16:24:53 Get A/D value=-858993460 result=40 16:24:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:53 Parameters OK 16:24:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:53 Set A/D data flow result=40 16:24:53 Set A/D channel type result=40 16:24:53 Set A/D encoding result=40 16:24:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:53 Set channel filter=0.000000e+000 result=40 16:24:53 Config A/D Result=40 16:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:53 Get A/D filter: -9.255963e+061 result=40 16:24:53 Get A/D value=-858993460 result=40 16:24:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:24:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:24:53 Aux= 16:24:53 Message to Camera, serial 122232 queued 16:25:30 Received message from Master: op=PointingHead serial=122245 16:25:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:25:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:25:30 Point started: ret=0 16:25:30 point_skyscan result=0 16:25:31 Check angles 16:25:31 SkyScan query 16:25:32 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 16:25:32 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 16:25:32 Check angles 16:25:32 SkyScan query 16:25:32 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 16:25:32 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 16:25:33 Check angles 16:25:33 SkyScan query 16:25:33 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 16:25:33 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 16:25:33 Check angles 16:25:33 SkyScan query 16:25:34 SkyScan query done: ret=0 az=162.24<-10816 ze=38.505<-9433 Statuses=0009 0008 16:25:34 Msec=2250 True Az=162.24 Ze=38.505 Az status=0009 Ze status=0008 16:25:34 Check angles 16:25:34 SkyScan query 16:25:35 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:25:35 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:25:35 Check angles 16:25:35 SkyScan query 16:25:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:25:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:25:35 Message to Master queued w/err=0: serial=122245 error=0 16:25:40 Received message from Master: op=Filter serial=122246 16:25:40 Color wheel filter change from 0 to 0 16:25:40 FLIGetFilterPos err=0 currentPosition=0 16:25:40 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:40 Filter is already there-color wheel unchanged 16:25:41 Received message from Master: op=Shutter serial=122247 16:25:41 Shutter LASER close 16:25:41 Received message from Camera: op=State serial=122249 16:25:41 GetSingleValue result=40 Value=cccccccc 16:25:41 SkyScan query 16:25:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:25:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:41 Parameters OK 16:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:41 Set A/D data flow result=40 16:25:41 Set A/D channel type result=40 16:25:41 Set A/D encoding result=40 16:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:41 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-13 16:25:41] 16:25:41 Config A/D Result=40 16:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:41 Get A/D filter: -9.255963e+061 result=40 16:25:41 Get A/D value=-858993460 result=40 16:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:41 Parameters OK 16:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:41 Set A/D data flow result=40 16:25:41 Set A/D channel type result=40 16:25:41 Set A/D encoding result=40 16:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:41 Set channel filter=0.000000e+000 result=40 16:25:41 Config A/D Result=40 16:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:41 Get A/D filter: -9.255963e+061 result=40 16:25:41 Get A/D value=-858993460 result=40 16:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:41 Aux= 16:25:41 Message to Camera, serial 122249 queued 16:26:18 Received message from Master: op=PointingHead serial=122262 16:26:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:26:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:26:18 Point started: ret=0 16:26:18 point_skyscan result=0 16:26:19 Check angles 16:26:19 SkyScan query 16:26:20 SkyScan query done: ret=0 az=152.97<-10198 ze=8.625<-11425 Statuses=0009 0009 16:26:20 Msec=0 True Az=152.97 Ze=8.625 Az status=0009 Ze status=0009 16:26:20 Check angles 16:26:20 SkyScan query 16:26:20 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.735<-12849 Statuses=0009 0009 16:26:20 Msec=750 True Az=135.09 Ze=-12.735 Az status=0009 Ze status=0009 16:26:21 Check angles 16:26:21 SkyScan query 16:26:21 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.72<-14248 Statuses=0009 0009 16:26:21 Msec=1500 True Az=117.585 Ze=-33.72 Az status=0009 Ze status=0009 16:26:21 Check angles 16:26:21 SkyScan query 16:26:22 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.555<-15437 Statuses=0009 0009 16:26:22 Msec=2250 True Az=100.2 Ze=-51.555 Az status=0009 Ze status=0009 16:26:22 Check angles 16:26:22 SkyScan query 16:26:23 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:26:23 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:26:23 Check angles 16:26:23 SkyScan query 16:26:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 16:26:23 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 16:26:23 Message to Master queued w/err=0: serial=122262 error=0 16:26:28 Received message from Master: op=Filter serial=122263 16:26:28 Color wheel filter change from 0 to 0 16:26:28 FLIGetFilterPos err=0 currentPosition=0 16:26:28 FLIGetStepsRemaining err=0 RemainingSteps=0 16:26:28 Filter is already there-color wheel unchanged 16:26:29 Received message from Master: op=Shutter serial=122264 16:26:29 Shutter LASER close 16:26:29 Received message from Camera: op=State serial=122266 16:26:29 GetSingleValue result=40 Value=cccccccc 16:26:29 SkyScan query 16:26:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:26:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:29 Parameters OK 16:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:29 Set A/D data flow result=40 16:26:29 Set A/D channel type result=40 16:26:29 Set A/D encoding result=40 16:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:29 Set channel filter=0.000000e+000 result=40 16:26:29 Config A/D Result=40 16:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:29 Get A/D filter: -9.255963e+061 result=40 16:26:29 Get A/D value=-858993460 result=40 16:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:29 Parameters OK 16:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:29 Set A/D data flow result=40 16:26:29 Set A/D channel type result=40 16:26:29 Set A/D encoding result=40 16:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:29 Set channel filter=0.000000e+000 result=40 16:26:29 Config A/D Result=40 16:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:29 Get A/D filter: -9.255963e+061 result=40 16:26:29 Get A/D value=-858993460 result=40 16:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:26:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:26:29 Aux= 16:26:29 Message to Camera, serial 122266 queued 16:27:06 Received message from Master: op=PointingHead serial=122279 16:27:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:27:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:27:06 Point started: ret=0 16:27:06 point_skyscan result=0 16:27:07 Check angles 16:27:07 SkyScan query 16:27:08 SkyScan query done: ret=0 az=108.81<-7254 ze=-80.955<-17397 Statuses=0009 0009 16:27:08 Msec=0 True Az=108.81 Ze=-80.955 Az status=0009 Ze status=0009 16:27:08 Check angles 16:27:08 SkyScan query 16:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.36<-18824 Statuses=0008 0009 16:27:08 Msec=750 True Az=112.995 Ze=-102.36 Az status=0008 Ze status=0009 16:27:09 Check angles 16:27:09 SkyScan query 16:27:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.315<-20221 Statuses=0008 0009 16:27:09 Msec=1500 True Az=112.995 Ze=-123.315 Az status=0008 Ze status=0009 16:27:09 Check angles 16:27:09 SkyScan query 16:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.285<-21619 Statuses=0008 0009 16:27:10 Msec=2250 True Az=112.995 Ze=-144.285 Az status=0008 Ze status=0009 16:27:10 Check angles 16:27:10 SkyScan query 16:27:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 16:27:11 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 16:27:11 Check angles 16:27:11 SkyScan query 16:27:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:27:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:27:11 Message to Master queued w/err=0: serial=122279 error=0 16:27:16 Received message from Master: op=Filter serial=122280 16:27:16 Color wheel filter change from 0 to 0 16:27:16 FLIGetFilterPos err=0 currentPosition=0 16:27:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:16 Filter is already there-color wheel unchanged 16:27:17 Received message from Master: op=Shutter serial=122281 16:27:17 Shutter LASER open 16:27:17 Received message from Camera: op=State serial=122283 16:27:17 GetSingleValue result=40 Value=cccccccc 16:27:17 SkyScan query 16:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:27:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:17 Parameters OK 16:27:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:17 Set A/D data flow result=40 16:27:17 Set A/D channel type result=40 16:27:17 Set A/D encoding result=40 16:27:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:17 Set channel filter=0.000000e+000 result=40 16:27:17 Config A/D Result=40 16:27:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:17 Get A/D filter: -9.255963e+061 result=40 16:27:17 Get A/D value=-858993460 result=40 16:27:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:17 Parameters OK 16:27:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:17 Set A/D data flow result=40 16:27:17 Set A/D channel type result=40 16:27:17 Set A/D encoding result=40 16:27:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:17 Set channel filter=0.000000e+000 result=40 16:27:17 Config A/D Result=40 16:27:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:17 Get A/D filter: -9.255963e+061 result=40 16:27:17 Get A/D value=-858993460 result=40 16:27:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:17 Aux= 16:27:17 Message to Camera, serial 122283 queued 16:27:26 Received message from Master: op=Shutter serial=122293 16:27:26 Shutter LASER close 16:27:26 Received message from Master: op=PointingHead serial=122297 16:27:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:27:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:27:27 Point started: ret=0 16:27:27 point_skyscan result=0 16:27:27 Check angles 16:27:27 SkyScan query 16:27:28 SkyScan query done: ret=0 az=89.85<-5990 ze=157.215<-1519 Statuses=0009 0009 16:27:28 Msec=0 True Az=89.85 Ze=157.215 Az status=0009 Ze status=0009 16:27:28 Check angles 16:27:28 SkyScan query 16:27:29 SkyScan query done: ret=0 az=72.015<-4801 ze=135.825<-2945 Statuses=0009 0009 16:27:29 Msec=750 True Az=72.015 Ze=135.825 Az status=0009 Ze status=0009 16:27:29 Check angles 16:27:29 SkyScan query 16:27:29 SkyScan query done: ret=0 az=54.42<-3628 ze=114.405<-4373 Statuses=0009 0009 16:27:29 Msec=1500 True Az=54.42 Ze=114.405 Az status=0009 Ze status=0009 16:27:30 Check angles 16:27:30 SkyScan query 16:27:30 SkyScan query done: ret=0 az=40.98<-2732 ze=93.495<-5767 Statuses=0009 0009 16:27:30 Msec=2250 True Az=40.98 Ze=93.495 Az status=0009 Ze status=0009 16:27:30 Check angles 16:27:30 SkyScan query 16:27:31 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 16:27:31 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 16:27:31 Check angles 16:27:31 SkyScan query 16:27:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.095<-8527 Statuses=0008 0009 16:27:32 Msec=3750 True Az=40.995 Ze=52.095 Az status=0008 Ze status=0009 16:27:32 Check angles 16:27:32 SkyScan query 16:27:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:27:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:27:33 Message to Master queued w/err=0: serial=122297 error=0 16:27:38 Received message from Master: op=Filter serial=122298 16:27:38 Color wheel filter change from 0 to 0 16:27:38 FLIGetFilterPos err=0 currentPosition=0 16:27:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:38 Filter is already there-color wheel unchanged 16:27:38 Received message from Master: op=Shutter serial=122299 16:27:38 Shutter LASER close 16:27:38 Received message from Camera: op=State serial=122301 16:27:38 GetSingleValue result=40 Value=cccccccc 16:27:38 SkyScan query 16:27:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:27:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:38 Parameters OK 16:27:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:38 Set A/D data flow result=40 16:27:38 Set A/D channel type result=40 16:27:38 Set A/D encoding result=40 16:27:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:38 Set channel filter=0.000000e+000 result=40 16:27:38 Config A/D Result=40 16:27:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:38 Get A/D filter: -9.255963e+061 result=40 16:27:38 Get A/D value=-858993460 result=40 16:27:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:38 Parameters OK 16:27:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:38 Set A/D data flow result=40 16:27:38 Set A/D channel type result=40 16:27:38 Set A/D encoding result=40 16:27:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:38 Set channel filter=0.000000e+000 result=40 16:27:38 Config A/D Result=40 16:27:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:38 Get A/D filter: -9.255963e+061 result=40 16:27:38 Get A/D value=-858993460 result=40 16:27:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:38 Aux= 16:27:38 Message to Camera, serial 122301 queued 16:28:15 Received message from Master: op=PointingHead serial=122314 16:28:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:28:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:28:16 Point started: ret=0 16:28:16 point_skyscan result=0 16:28:16 Check angles 16:28:16 SkyScan query 16:28:17 SkyScan query done: ret=0 az=63.87<-4258 ze=66.54<-7564 Statuses=0009 0008 16:28:17 Msec=0 True Az=63.87 Ze=66.54 Az status=0009 Ze status=0008 16:28:17 Check angles 16:28:17 SkyScan query 16:28:18 SkyScan query done: ret=0 az=81.465<-5431 ze=66.51<-7566 Statuses=0009 0008 16:28:18 Msec=750 True Az=81.465 Ze=66.51 Az status=0009 Ze status=0008 16:28:18 Check angles 16:28:18 SkyScan query 16:28:19 SkyScan query done: ret=0 az=98.895<-6593 ze=66.495<-7567 Statuses=0009 0008 16:28:19 Msec=1500 True Az=98.895 Ze=66.495 Az status=0009 Ze status=0008 16:28:19 Check angles 16:28:19 SkyScan query 16:28:19 SkyScan query done: ret=0 az=116.265<-7751 ze=66.495<-7567 Statuses=0009 0008 16:28:19 Msec=2250 True Az=116.265 Ze=66.495 Az status=0009 Ze status=0008 16:28:19 Check angles 16:28:19 SkyScan query 16:28:20 SkyScan query done: ret=0 az=133.875<-8925 ze=66.495<-7567 Statuses=0009 0008 16:28:20 Msec=3000 True Az=133.875 Ze=66.495 Az status=0009 Ze status=0008 16:28:20 Check angles 16:28:20 SkyScan query 16:28:21 SkyScan query done: ret=0 az=151.2<-10080 ze=66.495<-7567 Statuses=0009 0008 16:28:21 Msec=3750 True Az=151.2 Ze=66.495 Az status=0009 Ze status=0008 16:28:21 Check angles 16:28:21 SkyScan query 16:28:22 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:28:22 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:28:22 Message to Master queued w/err=0: serial=122314 error=0 16:28:27 Received message from Master: op=Filter serial=122315 16:28:27 Color wheel filter change from 0 to 0 16:28:27 FLIGetFilterPos err=0 currentPosition=0 16:28:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:28:27 Filter is already there-color wheel unchanged 16:28:27 Received message from Master: op=Shutter serial=122316 16:28:27 Shutter LASER close 16:28:27 Received message from Camera: op=State serial=122318 16:28:27 GetSingleValue result=40 Value=cccccccc 16:28:27 SkyScan query 16:28:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:28:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:27 Parameters OK 16:28:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:27 Set A/D data flow result=40 16:28:27 Set A/D channel type result=40 16:28:27 Set A/D encoding result=40 16:28:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:27 Set channel filter=0.000000e+000 result=40 16:28:27 Config A/D Result=40 16:28:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:27 Get A/D filter: -9.255963e+061 result=40 16:28:27 Get A/D value=-858993460 result=40 16:28:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:27 Parameters OK 16:28:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:27 Set A/D data flow result=40 16:28:27 Set A/D channel type result=40 16:28:27 Set A/D encoding result=40 16:28:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:27 Set channel filter=0.000000e+000 result=40 16:28:27 Config A/D Result=40 16:28:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:27 Get A/D filter: -9.255963e+061 result=40 16:28:27 Get A/D value=-858993460 result=40 16:28:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:28:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:28:27 Aux= 16:28:27 Message to Camera, serial 122318 queued 16:29:04 Received message from Master: op=PointingHead serial=122331 16:29:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:29:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:29:04 Point started: ret=0 16:29:04 point_skyscan result=0 16:29:05 Check angles 16:29:05 SkyScan query 16:29:06 SkyScan query done: ret=0 az=134.79<-8986 ze=36.555<-9563 Statuses=0009 0009 16:29:06 Msec=0 True Az=134.79 Ze=36.555 Az status=0009 Ze status=0009 16:29:06 Check angles 16:29:06 SkyScan query 16:29:07 SkyScan query done: ret=0 az=117.255<-7817 ze=15.615<-10959 Statuses=0009 0009 16:29:07 Msec=750 True Az=117.255 Ze=15.615 Az status=0009 Ze status=0009 16:29:07 Check angles 16:29:07 SkyScan query 16:29:07 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.37<-12358 Statuses=0009 0009 16:29:07 Msec=1500 True Az=99.885 Ze=-5.37 Az status=0009 Ze status=0009 16:29:07 Check angles 16:29:07 SkyScan query 16:29:08 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.31<-13754 Statuses=0009 0009 16:29:08 Msec=2250 True Az=82.455 Ze=-26.31 Az status=0009 Ze status=0009 16:29:08 Check angles 16:29:08 SkyScan query 16:29:09 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.565<-14571 Statuses=0009 0008 16:29:09 Msec=3000 True Az=64.875 Ze=-38.565 Az status=0009 Ze status=0008 16:29:09 Check angles 16:29:09 SkyScan query 16:29:10 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.535<-14569 Statuses=0009 0008 16:29:10 Msec=3750 True Az=47.16 Ze=-38.535 Az status=0009 Ze status=0008 16:29:10 Check angles 16:29:10 SkyScan query 16:29:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:29:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:29:10 Message to Master queued w/err=0: serial=122331 error=0 16:29:15 Received message from Master: op=Filter serial=122332 16:29:15 Color wheel filter change from 0 to 0 16:29:15 FLIGetFilterPos err=0 currentPosition=0 16:29:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:15 Filter is already there-color wheel unchanged 16:29:15 Received message from Master: op=Shutter serial=122333 16:29:15 Shutter LASER close 16:29:16 Received message from Camera: op=State serial=122335 16:29:16 GetSingleValue result=40 Value=cccccccc 16:29:16 SkyScan query 16:29:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:29:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:16 Parameters OK 16:29:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:16 Set A/D data flow result=40 16:29:16 Set A/D channel type result=40 16:29:16 Set A/D encoding result=40 16:29:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:16 Set channel filter=0.000000e+000 result=40 16:29:16 Config A/D Result=40 16:29:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:16 Get A/D filter: -9.255963e+061 result=40 16:29:16 Get A/D value=-858993460 result=40 16:29:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:16 Parameters OK 16:29:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:16 Set A/D data flow result=40 16:29:16 Set A/D channel type result=40 16:29:16 Set A/D encoding result=40 16:29:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:16 Set channel filter=0.000000e+000 result=40 16:29:16 Config A/D Result=40 16:29:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:16 Get A/D filter: -9.255963e+061 result=40 16:29:16 Get A/D value=-858993460 result=40 16:29:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:16 Aux= 16:29:16 Message to Camera, serial 122335 queued 16:29:53 Received message from Master: op=PointingHead serial=122348 16:29:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:29:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:29:53 Point started: ret=0 16:29:53 point_skyscan result=0 16:29:54 Check angles 16:29:54 SkyScan query 16:29:55 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.325<-16555 Statuses=0009 0009 16:29:55 Msec=0 True Az=64.2 Ze=-68.325 Az status=0009 Ze status=0009 16:29:55 Check angles 16:29:55 SkyScan query 16:29:55 SkyScan query done: ret=0 az=81.675<-5445 ze=-89.31<-17954 Statuses=0009 0009 16:29:55 Msec=750 True Az=81.675 Ze=-89.31 Az status=0009 Ze status=0009 16:29:56 Check angles 16:29:56 SkyScan query 16:29:56 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.25<-19350 Statuses=0009 0009 16:29:56 Msec=1500 True Az=99.18 Ze=-110.25 Az status=0009 Ze status=0009 16:29:56 Check angles 16:29:56 SkyScan query 16:29:57 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.205<-20747 Statuses=0009 0009 16:29:57 Msec=2250 True Az=116.61 Ze=-131.205 Az status=0009 Ze status=0009 16:29:57 Check angles 16:29:57 SkyScan query 16:29:58 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 16:29:58 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 16:29:58 Check angles 16:29:58 SkyScan query 16:29:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:29:58 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:29:58 Message to Master queued w/err=0: serial=122348 error=0 16:30:03 Received message from Master: op=Filter serial=122349 16:30:03 Color wheel filter change from 0 to 0 16:30:03 FLIGetFilterPos err=0 currentPosition=0 16:30:03 FLIGetStepsRemaining err=0 RemainingSteps=0 16:30:03 Filter is already there-color wheel unchanged 16:30:04 Received message from Master: op=Shutter serial=122350 16:30:04 Shutter LASER close 16:30:04 Received message from Camera: op=State serial=122352 16:30:04 GetSingleValue result=40 Value=cccccccc 16:30:04 SkyScan query 16:30:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:30:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:04 Parameters OK 16:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:04 Set A/D data flow result=40 16:30:04 Set A/D channel type result=40 16:30:04 Set A/D encoding result=40 16:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:04 Set channel filter=0.000000e+000 result=40 16:30:04 Config A/D Result=40 16:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:04 Get A/D filter: -9.255963e+061 result=40 16:30:04 Get A/D value=-858993460 result=40 16:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:04 Parameters OK 16:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:04 Set A/D data flow result=40 16:30:04 Set A/D channel type result=40 16:30:04 Set A/D encoding result=40 16:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:04 Set channel filter=0.000000e+000 result=40 16:30:04 Config A/D Result=40 16:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:04 Get A/D filter: -9.255963e+061 result=40 16:30:04 Get A/D value=-858993460 result=40 16:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:30:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:30:04 Aux= 16:30:04 Message to Camera, serial 122352 queued 16:30:41 Received message from Master: op=PointingHead serial=122365 16:30:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:30:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:30:41 Point started: ret=0 16:30:41 point_skyscan result=0 16:30:42 Check angles 16:30:42 SkyScan query 16:30:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 16:30:43 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 16:30:43 Check angles 16:30:43 SkyScan query 16:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:30:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:30:43 Message to Master queued w/err=0: serial=122365 error=0 16:30:48 Received message from Master: op=Filter serial=122366 16:30:48 Color wheel filter change from 0 to 0 16:30:48 FLIGetFilterPos err=0 currentPosition=0 16:30:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:30:48 Filter is already there-color wheel unchanged 16:30:49 Received message from Master: op=Shutter serial=122367 16:30:49 Shutter LASER open 16:30:49 Received message from Camera: op=State serial=122369 16:30:49 GetSingleValue result=40 Value=cccccccc 16:30:49 SkyScan query 16:30:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:30:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:49 Parameters OK 16:30:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:49 Set A/D data flow result=40 16:30:49 Set A/D channel type result=40 16:30:49 Set A/D encoding result=40 16:30:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:49 Set channel filter=0.000000e+000 result=40 16:30:49 Config A/D Result=40 16:30:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:49 Get A/D filter: -9.255963e+061 result=40 16:30:49 Get A/D value=-858993460 result=40 16:30:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:49 Parameters OK 16:30:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:49 Set A/D data flow result=40 16:30:49 Set A/D channel type result=40 16:30:49 Set A/D encoding result=40 16:30:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:49 Set channel filter=0.000000e+000 result=40 16:30:49 Config A/D Result=40 16:30:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:49 Get A/D filter: -9.255963e+061 result=40 16:30:49 Get A/D value=-858993460 result=40 16:30:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:30:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:30:49 Aux= 16:30:49 Message to Camera, serial 122369 queued 16:30:58 Received message from Master: op=Shutter serial=122379 16:30:58 Shutter LASER close 16:30:58 Received message from Master: op=PointingHead serial=122383 16:30:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:30:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:30:59 Point started: ret=0 16:30:59 point_skyscan result=0 16:31:00 Check angles 16:31:00 SkyScan query 16:31:00 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.055<-21537 Statuses=0009 0009 16:31:00 Msec=0 True Az=136.14 Ze=-143.055 Az status=0009 Ze status=0009 16:31:00 Check angles 16:31:00 SkyScan query 16:31:01 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.085<-20139 Statuses=0009 0009 16:31:01 Msec=750 True Az=153.585 Ze=-122.085 Az status=0009 Ze status=0009 16:31:01 Check angles 16:31:01 SkyScan query 16:31:02 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.175<-18745 Statuses=0009 0009 16:31:02 Msec=1500 True Az=171.075 Ze=-101.175 Az status=0009 Ze status=0009 16:31:02 Check angles 16:31:02 SkyScan query 16:31:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 16:31:02 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 16:31:03 Check angles 16:31:03 SkyScan query 16:31:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.785<-15919 Statuses=0008 0009 16:31:03 Msec=3000 True Az=176.01 Ze=-58.785 Az status=0008 Ze status=0009 16:31:03 Check angles 16:31:03 SkyScan query 16:31:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:31:04 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:31:04 Message to Master queued w/err=0: serial=122383 error=0 16:31:09 Received message from Master: op=Filter serial=122384 16:31:09 Color wheel filter change from 0 to 0 16:31:09 FLIGetFilterPos err=0 currentPosition=0 16:31:09 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:09 Filter is already there-color wheel unchanged 16:31:09 Received message from Master: op=Shutter serial=122385 16:31:09 Shutter LASER close 16:31:09 Received message from Camera: op=State serial=122387 16:31:09 GetSingleValue result=40 Value=cccccccc 16:31:09 SkyScan query 16:31:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:31:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:10 Parameters OK 16:31:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:10 Set A/D data flow result=40 16:31:10 Set A/D channel type result=40 16:31:10 Set A/D encoding result=40 16:31:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:10 Set channel filter=0.000000e+000 result=40 16:31:10 Config A/D Result=40 16:31:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:10 Get A/D filter: -9.255963e+061 result=40 16:31:10 Get A/D value=-858993460 result=40 16:31:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:10 Parameters OK 16:31:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:10 Set A/D data flow result=40 16:31:10 Set A/D channel type result=40 16:31:10 Set A/D encoding result=40 16:31:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:10 Set channel filter=0.000000e+000 result=40 16:31:10 Config A/D Result=40 16:31:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:10 Get A/D filter: -9.255963e+061 result=40 16:31:10 Get A/D value=-858993460 result=40 16:31:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:10 Aux= 16:31:10 Message to Camera, serial 122387 queued 16:31:47 Received message from Master: op=PointingHead serial=122400 16:31:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:31:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:31:47 Point started: ret=0 16:31:47 point_skyscan result=0 16:31:48 Check angles 16:31:48 SkyScan query 16:31:48 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.795<-13453 Statuses=0009 0009 16:31:48 Msec=0 True Az=152.985 Ze=-21.795 Az status=0009 Ze status=0009 16:31:48 Check angles 16:31:48 SkyScan query 16:31:49 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.81<-12054 Statuses=0009 0009 16:31:49 Msec=750 True Az=135.615 Ze=-0.81 Az status=0009 Ze status=0009 16:31:49 Check angles 16:31:49 SkyScan query 16:31:50 SkyScan query done: ret=0 az=118.05<-7870 ze=20.13<-10658 Statuses=0009 0009 16:31:50 Msec=1500 True Az=118.05 Ze=20.13 Az status=0009 Ze status=0009 16:31:50 Check angles 16:31:50 SkyScan query 16:31:51 SkyScan query done: ret=0 az=100.68<-6712 ze=41.085<-9261 Statuses=0009 0009 16:31:51 Msec=2250 True Az=100.68 Ze=41.085 Az status=0009 Ze status=0009 16:31:51 Check angles 16:31:51 SkyScan query 16:31:51 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 16:31:51 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 16:31:51 Check angles 16:31:51 SkyScan query 16:31:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:31:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:31:52 Message to Master queued w/err=0: serial=122400 error=0 16:31:57 Received message from Master: op=Filter serial=122401 16:31:57 Color wheel filter change from 0 to 0 16:31:57 FLIGetFilterPos err=0 currentPosition=0 16:31:57 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:57 Filter is already there-color wheel unchanged 16:31:57 Received message from Master: op=Shutter serial=122402 16:31:57 Shutter LASER close 16:31:57 Received message from Camera: op=State serial=122404 16:31:57 GetSingleValue result=40 Value=cccccccc 16:31:57 SkyScan query 16:31:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:31:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:58 Parameters OK 16:31:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:58 Set A/D data flow result=40 16:31:58 Set A/D channel type result=40 16:31:58 Set A/D encoding result=40 16:31:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:58 Set channel filter=0.000000e+000 result=40 16:31:58 Config A/D Result=40 16:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:58 Get A/D filter: -9.255963e+061 result=40 16:31:58 Get A/D value=-858993460 result=40 16:31:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:58 Parameters OK 16:31:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:58 Set A/D data flow result=40 16:31:58 Set A/D channel type result=40 16:31:58 Set A/D encoding result=40 16:31:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:58 Set channel filter=0.000000e+000 result=40 16:31:58 Config A/D Result=40 16:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:58 Get A/D filter: -9.255963e+061 result=40 16:31:58 Get A/D value=-858993460 result=40 16:31:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:58 Aux= 16:31:58 Message to Camera, serial 122404 queued 16:32:35 Received message from Master: op=PointingHead serial=122417 16:32:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:32:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:32:35 Point started: ret=0 16:32:35 point_skyscan result=0 16:32:36 Check angles 16:32:36 SkyScan query 16:32:36 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 16:32:36 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 16:32:37 Check angles 16:32:37 SkyScan query 16:32:37 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 16:32:37 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 16:32:37 Check angles 16:32:37 SkyScan query 16:32:38 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 16:32:38 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 16:32:38 Check angles 16:32:38 SkyScan query 16:32:39 SkyScan query done: ret=0 az=161.64<-10776 ze=38.505<-9433 Statuses=0009 0008 16:32:39 Msec=2250 True Az=161.64 Ze=38.505 Az status=0009 Ze status=0008 16:32:39 Check angles 16:32:39 SkyScan query 16:32:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:32:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:32:40 Check angles 16:32:40 SkyScan query 16:32:40 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:32:40 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:32:40 Message to Master queued w/err=0: serial=122417 error=0 16:32:45 Received message from Master: op=Filter serial=122418 16:32:45 Color wheel filter change from 0 to 0 16:32:45 FLIGetFilterPos err=0 currentPosition=0 16:32:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:45 Filter is already there-color wheel unchanged 16:32:45 Received message from Master: op=Shutter serial=122419 16:32:45 Shutter LASER close 16:32:45 Received message from Camera: op=State serial=122421 16:32:45 GetSingleValue result=40 Value=cccccccc 16:32:45 SkyScan query 16:32:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:32:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:46 Parameters OK 16:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:46 Set A/D data flow result=40 16:32:46 Set A/D channel type result=40 16:32:46 Set A/D encoding result=40 16:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:46 Set channel filter=0.000000e+000 result=40 16:32:46 Config A/D Result=40 16:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:46 Get A/D filter: -9.255963e+061 result=40 16:32:46 Get A/D value=-858993460 result=40 16:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:46 Parameters OK 16:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:46 Set A/D data flow result=40 16:32:46 Set A/D channel type result=40 16:32:46 Set A/D encoding result=40 16:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:46 Set channel filter=0.000000e+000 result=40 16:32:46 Config A/D Result=40 16:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:46 Get A/D filter: -9.255963e+061 result=40 16:32:46 Get A/D value=-858993460 result=40 16:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:46 Aux= 16:32:46 Message to Camera, serial 122421 queued 16:33:22 Received message from Master: op=PointingHead serial=122433 16:33:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:33:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:33:22 Point started: ret=0 16:33:22 point_skyscan result=0 16:33:23 Check angles 16:33:23 SkyScan query 16:33:24 SkyScan query done: ret=0 az=153.105<-10207 ze=8.82<-11412 Statuses=0009 0009 16:33:24 Msec=0 True Az=153.105 Ze=8.82 Az status=0009 Ze status=0009 16:33:24 Check angles 16:33:24 SkyScan query 16:33:24 SkyScan query done: ret=0 az=135.645<-9043 ze=-12.15<-12810 Statuses=0009 0009 16:33:24 Msec=750 True Az=135.645 Ze=-12.15 Az status=0009 Ze status=0009 16:33:24 Check angles 16:33:24 SkyScan query 16:33:25 SkyScan query done: ret=0 az=118.14<-7876 ze=-33.06<-14204 Statuses=0009 0009 16:33:25 Msec=1500 True Az=118.14 Ze=-33.06 Az status=0009 Ze status=0009 16:33:25 Check angles 16:33:25 SkyScan query 16:33:26 SkyScan query done: ret=0 az=100.74<-6716 ze=-51.525<-15435 Statuses=0009 0009 16:33:26 Msec=2250 True Az=100.74 Ze=-51.525 Az status=0009 Ze status=0009 16:33:26 Check angles 16:33:26 SkyScan query 16:33:27 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:33:27 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:33:27 Check angles 16:33:27 SkyScan query 16:33:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:33:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:33:27 Message to Master queued w/err=0: serial=122433 error=0 16:33:32 Received message from Master: op=Filter serial=122434 16:33:32 Color wheel filter change from 0 to 0 16:33:32 FLIGetFilterPos err=0 currentPosition=0 16:33:32 FLIGetStepsRemaining err=0 RemainingSteps=0 16:33:32 Filter is already there-color wheel unchanged 16:33:32 Received message from Master: op=Shutter serial=122435 16:33:32 Shutter LASER close 16:33:32 Received message from Camera: op=State serial=122437 16:33:32 GetSingleValue result=40 Value=cccccccc 16:33:32 SkyScan query 16:33:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:33:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:33 Parameters OK 16:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:33 Set A/D data flow result=40 16:33:33 Set A/D channel type result=40 16:33:33 Set A/D encoding result=40 16:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:33 Set channel filter=0.000000e+000 result=40 16:33:33 Config A/D Result=40 16:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:33 Get A/D filter: -9.255963e+061 result=40 16:33:33 Get A/D value=-858993460 result=40 16:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:33 Parameters OK 16:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:33 Set A/D data flow result=40 16:33:33 Set A/D channel type result=40 16:33:33 Set A/D encoding result=40 16:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:33 Set channel filter=0.000000e+000 result=40 16:33:33 Config A/D Result=40 16:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:33 Get A/D filter: -9.255963e+061 result=40 16:33:33 Get A/D value=-858993460 result=40 16:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:33:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:33:33 Aux= 16:33:33 Message to Camera, serial 122437 queued 16:34:10 Received message from Master: op=PointingHead serial=122450 16:34:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:34:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:34:10 Point started: ret=0 16:34:10 point_skyscan result=0 16:34:11 Check angles 16:34:11 SkyScan query 16:34:12 SkyScan query done: ret=0 az=109.53<-7302 ze=-81.78<-17452 Statuses=0009 0009 16:34:12 Msec=0 True Az=109.53 Ze=-81.78 Az status=0009 Ze status=0009 16:34:12 Check angles 16:34:12 SkyScan query 16:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.245<-18883 Statuses=0008 0009 16:34:12 Msec=750 True Az=112.995 Ze=-103.245 Az status=0008 Ze status=0009 16:34:13 Check angles 16:34:13 SkyScan query 16:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.11<-20274 Statuses=0008 0009 16:34:13 Msec=1500 True Az=112.995 Ze=-124.11 Az status=0008 Ze status=0009 16:34:13 Check angles 16:34:13 SkyScan query 16:34:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 16:34:14 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 16:34:14 Check angles 16:34:14 SkyScan query 16:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.975<-23065 Statuses=0008 0009 16:34:15 Msec=3000 True Az=112.995 Ze=-165.975 Az status=0008 Ze status=0009 16:34:15 Check angles 16:34:15 SkyScan query 16:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:34:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:34:15 Message to Master queued w/err=0: serial=122450 error=0 16:34:20 Received message from Master: op=Filter serial=122451 16:34:20 Color wheel filter change from 0 to 0 16:34:20 FLIGetFilterPos err=0 currentPosition=0 16:34:20 FLIGetStepsRemaining err=0 RemainingSteps=0 16:34:20 Filter is already there-color wheel unchanged 16:34:21 Received message from Master: op=Shutter serial=122452 16:34:21 Shutter LASER open 16:34:21 Received message from Camera: op=State serial=122454 16:34:21 GetSingleValue result=40 Value=cccccccc 16:34:21 SkyScan query 16:34:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:34:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:21 Parameters OK 16:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:21 Set A/D data flow result=40 16:34:21 Set A/D channel type result=40 16:34:21 Set A/D encoding result=40 16:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:21 Set channel filter=0.000000e+000 result=40 16:34:21 Config A/D Result=40 16:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:21 Get A/D filter: -9.255963e+061 result=40 16:34:21 Get A/D value=-858993460 result=40 16:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:21 Parameters OK 16:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:21 Set A/D data flow result=40 16:34:21 Set A/D channel type result=40 16:34:21 Set A/D encoding result=40 16:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:21 Set channel filter=0.000000e+000 result=40 16:34:21 Config A/D Result=40 16:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:21 Get A/D filter: -9.255963e+061 result=40 16:34:21 Get A/D value=-858993460 result=40 16:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:34:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:34:21 Aux= 16:34:21 Message to Camera, serial 122454 queued 16:34:30 Received message from Master: op=Shutter serial=122464 16:34:30 Shutter LASER close 16:34:30 Received message from Master: op=PointingHead serial=122468 16:34:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:34:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:34:31 Point started: ret=0 16:34:31 point_skyscan result=0 16:34:31 Check angles 16:34:31 SkyScan query 16:34:32 SkyScan query done: ret=0 az=89.595<-5973 ze=156.825<-1545 Statuses=0009 0009 16:34:32 Msec=0 True Az=89.595 Ze=156.825 Az status=0009 Ze status=0009 16:34:32 Check angles 16:34:32 SkyScan query 16:34:33 SkyScan query done: ret=0 az=71.505<-4767 ze=135.45<-2970 Statuses=0009 0009 16:34:33 Msec=750 True Az=71.505 Ze=135.45 Az status=0009 Ze status=0009 16:34:33 Check angles 16:34:33 SkyScan query 16:34:33 SkyScan query done: ret=0 az=54.45<-3630 ze=114.39<-4374 Statuses=0009 0009 16:34:33 Msec=1500 True Az=54.45 Ze=114.39 Az status=0009 Ze status=0009 16:34:34 Check angles 16:34:34 SkyScan query 16:34:34 SkyScan query done: ret=0 az=40.95<-2730 ze=93.525<-5765 Statuses=0009 0009 16:34:34 Msec=2250 True Az=40.95 Ze=93.525 Az status=0009 Ze status=0009 16:34:34 Check angles 16:34:34 SkyScan query 16:34:35 SkyScan query done: ret=0 az=40.995<-2733 ze=72.12<-7192 Statuses=0008 0009 16:34:35 Msec=3000 True Az=40.995 Ze=72.12 Az status=0008 Ze status=0009 16:34:35 Check angles 16:34:35 SkyScan query 16:34:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.11<-8526 Statuses=0008 0009 16:34:36 Msec=3750 True Az=40.995 Ze=52.11 Az status=0008 Ze status=0009 16:34:36 Check angles 16:34:36 SkyScan query 16:34:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:34:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:34:36 Message to Master queued w/err=0: serial=122468 error=0 16:34:41 Received message from Master: op=Filter serial=122469 16:34:41 Color wheel filter change from 0 to 0 16:34:41 FLIGetFilterPos err=0 currentPosition=0 16:34:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:34:41 Filter is already there-color wheel unchanged 16:34:42 Received message from Master: op=Shutter serial=122470 16:34:42 Shutter LASER close 16:34:42 Received message from Camera: op=State serial=122472 16:34:42 GetSingleValue result=40 Value=cccccccc 16:34:42 SkyScan query 16:34:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:34:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:42 Parameters OK 16:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:42 Set A/D data flow result=40 16:34:42 Set A/D channel type result=40 16:34:42 Set A/D encoding result=40 16:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:42 Set channel filter=0.000000e+000 result=40 16:34:42 Config A/D Result=40 16:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:42 Get A/D filter: -9.255963e+061 result=40 16:34:42 Get A/D value=-858993460 result=40 16:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:42 Parameters OK 16:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:42 Set A/D data flow result=40 16:34:42 Set A/D channel type result=40 16:34:42 Set A/D encoding result=40 16:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:42 Set channel filter=0.000000e+000 result=40 16:34:42 Config A/D Result=40 16:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:42 Get A/D filter: -9.255963e+061 result=40 16:34:42 Get A/D value=-858993460 result=40 16:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:34:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:34:42 Aux= 16:34:42 Message to Camera, serial 122472 queued 16:35:19 Received message from Master: op=PointingHead serial=122485 16:35:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:35:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:35:19 Point started: ret=0 16:35:19 point_skyscan result=0 16:35:20 Check angles 16:35:20 SkyScan query 16:35:21 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 16:35:21 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 16:35:21 Check angles 16:35:21 SkyScan query 16:35:22 SkyScan query done: ret=0 az=81.33<-5422 ze=66.495<-7567 Statuses=0009 0008 16:35:22 Msec=750 True Az=81.33 Ze=66.495 Az status=0009 Ze status=0008 16:35:22 Check angles 16:35:22 SkyScan query 16:35:22 SkyScan query done: ret=0 az=98.79<-6586 ze=66.495<-7567 Statuses=0009 0008 16:35:22 Msec=1500 True Az=98.79 Ze=66.495 Az status=0009 Ze status=0008 16:35:22 Check angles 16:35:22 SkyScan query 16:35:23 SkyScan query done: ret=0 az=116.175<-7745 ze=66.495<-7567 Statuses=0009 0008 16:35:23 Msec=2250 True Az=116.175 Ze=66.495 Az status=0009 Ze status=0008 16:35:23 Check angles 16:35:23 SkyScan query 16:35:24 SkyScan query done: ret=0 az=133.8<-8920 ze=66.495<-7567 Statuses=0009 0008 16:35:24 Msec=3000 True Az=133.8 Ze=66.495 Az status=0009 Ze status=0008 16:35:24 Check angles 16:35:24 SkyScan query 16:35:25 SkyScan query done: ret=0 az=151.44<-10096 ze=66.495<-7567 Statuses=0009 0008 16:35:25 Msec=3750 True Az=151.44 Ze=66.495 Az status=0009 Ze status=0008 16:35:25 Check angles 16:35:25 SkyScan query 16:35:25 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:35:25 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:35:25 Message to Master queued w/err=0: serial=122485 error=0 16:35:30 Received message from Master: op=Filter serial=122486 16:35:30 Color wheel filter change from 0 to 0 16:35:30 FLIGetFilterPos err=0 currentPosition=0 16:35:30 FLIGetStepsRemaining err=0 RemainingSteps=0 16:35:30 Filter is already there-color wheel unchanged 16:35:30 Received message from Master: op=Shutter serial=122487 16:35:30 Shutter LASER close 16:35:31 Received message from Camera: op=State serial=122489 16:35:31 GetSingleValue result=40 Value=cccccccc 16:35:31 SkyScan query 16:35:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:35:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:31 Parameters OK 16:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 [UTC 2018-12-13 16:35:31] 16:35:31 Set A/D data flow result=40 16:35:31 Set A/D channel type result=40 16:35:31 Set A/D encoding result=40 16:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:31 Set channel filter=0.000000e+000 result=40 16:35:31 Config A/D Result=40 16:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:31 Get A/D filter: -9.255963e+061 result=40 16:35:31 Get A/D value=-858993460 result=40 16:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:31 Parameters OK 16:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:31 Set A/D data flow result=40 16:35:31 Set A/D channel type result=40 16:35:31 Set A/D encoding result=40 16:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:31 Set channel filter=0.000000e+000 result=40 16:35:31 Config A/D Result=40 16:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:31 Get A/D filter: -9.255963e+061 result=40 16:35:31 Get A/D value=-858993460 result=40 16:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:35:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:35:31 Aux= 16:35:31 Message to Camera, serial 122489 queued [UTC 2018-12-13 16:35:52] 16:36:08 Received message from Master: op=PointingHead serial=122502 16:36:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:36:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:36:08 Point started: ret=0 16:36:08 point_skyscan result=0 16:36:09 Check angles 16:36:09 SkyScan query 16:36:10 SkyScan query done: ret=0 az=135.06<-9004 ze=36.855<-9543 Statuses=0009 0009 16:36:10 Msec=0 True Az=135.06 Ze=36.855 Az status=0009 Ze status=0009 16:36:10 Check angles 16:36:10 SkyScan query 16:36:10 SkyScan query done: ret=0 az=117.525<-7835 ze=15.9<-10940 Statuses=0009 0009 16:36:10 Msec=750 True Az=117.525 Ze=15.9 Az status=0009 Ze status=0009 16:36:11 Check angles 16:36:11 SkyScan query 16:36:11 SkyScan query done: ret=0 az=100.17<-6678 ze=-5.055<-12337 Statuses=0009 0009 16:36:11 Msec=1500 True Az=100.17 Ze=-5.055 Az status=0009 Ze status=0009 16:36:11 Check angles 16:36:11 SkyScan query 16:36:12 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.01<-13734 Statuses=0009 0009 16:36:12 Msec=2250 True Az=82.65 Ze=-26.01 Az status=0009 Ze status=0009 16:36:12 Check angles 16:36:12 SkyScan query 16:36:13 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.58<-14572 Statuses=0009 0008 16:36:13 Msec=3000 True Az=64.755 Ze=-38.58 Az status=0009 Ze status=0008 16:36:13 Check angles 16:36:13 SkyScan query 16:36:13 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.52<-14568 Statuses=0009 0008 16:36:13 Msec=3750 True Az=47.31 Ze=-38.52 Az status=0009 Ze status=0008 16:36:14 Check angles 16:36:14 SkyScan query 16:36:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:36:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:36:14 Message to Master queued w/err=0: serial=122502 error=0 16:36:19 Received message from Master: op=Filter serial=122503 16:36:19 Color wheel filter change from 0 to 0 16:36:19 FLIGetFilterPos err=0 currentPosition=0 16:36:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:19 Filter is already there-color wheel unchanged 16:36:19 Received message from Master: op=Shutter serial=122504 16:36:19 Shutter LASER close 16:36:19 Received message from Camera: op=State serial=122506 16:36:19 GetSingleValue result=40 Value=cccccccc 16:36:19 SkyScan query 16:36:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:36:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:20 Parameters OK 16:36:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:20 Set A/D data flow result=40 16:36:20 Set A/D channel type result=40 16:36:20 Set A/D encoding result=40 16:36:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:20 Set channel filter=0.000000e+000 result=40 16:36:20 Config A/D Result=40 16:36:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:20 Get A/D filter: -9.255963e+061 result=40 16:36:20 Get A/D value=-858993460 result=40 16:36:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:20 Parameters OK 16:36:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:20 Set A/D data flow result=40 16:36:20 Set A/D channel type result=40 16:36:20 Set A/D encoding result=40 16:36:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:20 Set channel filter=0.000000e+000 result=40 16:36:20 Config A/D Result=40 16:36:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:20 Get A/D filter: -9.255963e+061 result=40 16:36:20 Get A/D value=-858993460 result=40 16:36:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:20 Aux= 16:36:20 Message to Camera, serial 122506 queued 16:36:57 Received message from Master: op=PointingHead serial=122519 16:36:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:36:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:36:57 Point started: ret=0 16:36:57 point_skyscan result=0 16:36:58 Check angles 16:36:58 SkyScan query 16:36:58 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.775<-16585 Statuses=0009 0009 16:36:58 Msec=0 True Az=64.425 Ze=-68.775 Az status=0009 Ze status=0009 16:36:59 Check angles 16:36:59 SkyScan query 16:36:59 SkyScan query done: ret=0 az=82.365<-5491 ze=-90.165<-18011 Statuses=0009 0009 16:36:59 Msec=750 True Az=82.365 Ze=-90.165 Az status=0009 Ze status=0009 16:36:59 Check angles 16:36:59 SkyScan query 16:37:00 SkyScan query done: ret=0 az=99.72<-6648 ze=-111.105<-19407 Statuses=0009 0009 16:37:00 Msec=1500 True Az=99.72 Ze=-111.105 Az status=0009 Ze status=0009 16:37:00 Check angles 16:37:00 SkyScan query 16:37:01 SkyScan query done: ret=0 az=117.225<-7815 ze=-132.03<-20802 Statuses=0009 0009 16:37:01 Msec=2250 True Az=117.225 Ze=-132.03 Az status=0009 Ze status=0009 16:37:01 Check angles 16:37:01 SkyScan query 16:37:01 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 16:37:01 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 16:37:02 Check angles 16:37:02 SkyScan query 16:37:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 16:37:02 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 16:37:02 Message to Master queued w/err=0: serial=122519 error=0 16:37:07 Received message from Master: op=Filter serial=122520 16:37:07 Color wheel filter change from 0 to 0 16:37:07 FLIGetFilterPos err=0 currentPosition=0 16:37:07 FLIGetStepsRemaining err=0 RemainingSteps=0 16:37:07 Filter is already there-color wheel unchanged 16:37:07 Received message from Master: op=Shutter serial=122521 16:37:07 Shutter LASER close 16:37:07 Received message from Camera: op=State serial=122523 16:37:07 GetSingleValue result=40 Value=cccccccc 16:37:07 SkyScan query 16:37:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:37:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:08 Parameters OK 16:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:08 Set A/D data flow result=40 16:37:08 Set A/D channel type result=40 16:37:08 Set A/D encoding result=40 16:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:08 Set channel filter=0.000000e+000 result=40 16:37:08 Config A/D Result=40 16:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:08 Get A/D filter: -9.255963e+061 result=40 16:37:08 Get A/D value=-858993460 result=40 16:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:08 Parameters OK 16:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:08 Set A/D data flow result=40 16:37:08 Set A/D channel type result=40 16:37:08 Set A/D encoding result=40 16:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:08 Set channel filter=0.000000e+000 result=40 16:37:08 Config A/D Result=40 16:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:08 Get A/D filter: -9.255963e+061 result=40 16:37:08 Get A/D value=-858993460 result=40 16:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:37:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:37:08 Aux= 16:37:08 Message to Camera, serial 122523 queued 16:37:45 Received message from Master: op=PointingHead serial=122536 16:37:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:37:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:37:45 Point started: ret=0 16:37:45 point_skyscan result=0 16:37:46 Check angles 16:37:46 SkyScan query 16:37:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 16:37:46 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 16:37:47 Check angles 16:37:47 SkyScan query 16:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:37:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:37:47 Message to Master queued w/err=0: serial=122536 error=0 16:37:52 Received message from Master: op=Filter serial=122537 16:37:52 Color wheel filter change from 0 to 0 16:37:52 FLIGetFilterPos err=0 currentPosition=0 16:37:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:37:52 Filter is already there-color wheel unchanged 16:37:52 Received message from Master: op=Shutter serial=122538 16:37:52 Shutter LASER open 16:37:53 Received message from Camera: op=State serial=122540 16:37:53 GetSingleValue result=40 Value=cccccccc 16:37:53 SkyScan query 16:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:37:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:53 Parameters OK 16:37:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:53 Set A/D data flow result=40 16:37:53 Set A/D channel type result=40 16:37:53 Set A/D encoding result=40 16:37:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:53 Set channel filter=0.000000e+000 result=40 16:37:53 Config A/D Result=40 16:37:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:53 Get A/D filter: -9.255963e+061 result=40 16:37:53 Get A/D value=-858993460 result=40 16:37:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:53 Parameters OK 16:37:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:53 Set A/D data flow result=40 16:37:53 Set A/D channel type result=40 16:37:53 Set A/D encoding result=40 16:37:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:53 Set channel filter=0.000000e+000 result=40 16:37:53 Config A/D Result=40 16:37:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:53 Get A/D filter: -9.255963e+061 result=40 16:37:53 Get A/D value=-858993460 result=40 16:37:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:37:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:37:53 Aux= 16:37:53 Message to Camera, serial 122540 queued 16:38:01 Received message from Master: op=Shutter serial=122549 16:38:01 Shutter LASER close 16:38:01 Received message from Master: op=PointingHead serial=122553 16:38:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:38:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:38:02 Point started: ret=0 16:38:02 point_skyscan result=0 16:38:02 Check angles 16:38:02 SkyScan query 16:38:03 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.025<-21535 Statuses=0009 0009 16:38:03 Msec=0 True Az=136.155 Ze=-143.025 Az status=0009 Ze status=0009 16:38:03 Check angles 16:38:03 SkyScan query 16:38:04 SkyScan query done: ret=0 az=153.99<-10266 ze=-121.665<-20111 Statuses=0009 0009 16:38:04 Msec=750 True Az=153.99 Ze=-121.665 Az status=0009 Ze status=0009 16:38:04 Check angles 16:38:04 SkyScan query 16:38:04 SkyScan query done: ret=0 az=171.855<-11457 ze=-100.2<-18680 Statuses=0009 0009 16:38:04 Msec=1500 True Az=171.855 Ze=-100.2 Az status=0009 Ze status=0009 16:38:05 Check angles 16:38:05 SkyScan query 16:38:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.275<-17285 Statuses=0008 0009 16:38:05 Msec=2250 True Az=176.01 Ze=-79.275 Az status=0008 Ze status=0009 16:38:05 Check angles 16:38:05 SkyScan query 16:38:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.305<-15887 Statuses=0008 0009 16:38:06 Msec=3000 True Az=176.01 Ze=-58.305 Az status=0008 Ze status=0009 16:38:06 Check angles 16:38:06 SkyScan query 16:38:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:38:07 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:38:07 Message to Master queued w/err=0: serial=122553 error=0 16:38:12 Received message from Master: op=Filter serial=122554 16:38:12 Color wheel filter change from 0 to 0 16:38:12 FLIGetFilterPos err=0 currentPosition=0 16:38:12 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:12 Filter is already there-color wheel unchanged 16:38:12 Received message from Master: op=Shutter serial=122555 16:38:12 Shutter LASER close 16:38:12 Received message from Camera: op=State serial=122557 16:38:12 GetSingleValue result=40 Value=cccccccc 16:38:12 SkyScan query 16:38:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:38:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:13 Parameters OK 16:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:13 Set A/D data flow result=40 16:38:13 Set A/D channel type result=40 16:38:13 Set A/D encoding result=40 16:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:13 Set channel filter=0.000000e+000 result=40 16:38:13 Config A/D Result=40 16:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:13 Get A/D filter: -9.255963e+061 result=40 16:38:13 Get A/D value=-858993460 result=40 16:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:13 Parameters OK 16:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:13 Set A/D data flow result=40 16:38:13 Set A/D channel type result=40 16:38:13 Set A/D encoding result=40 16:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:13 Set channel filter=0.000000e+000 result=40 16:38:13 Config A/D Result=40 16:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:13 Get A/D filter: -9.255963e+061 result=40 16:38:13 Get A/D value=-858993460 result=40 16:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:13 Aux= 16:38:13 Message to Camera, serial 122557 queued 16:38:49 Received message from Master: op=PointingHead serial=122570 16:38:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:38:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:38:50 Point started: ret=0 16:38:50 point_skyscan result=0 16:38:51 Check angles 16:38:51 SkyScan query 16:38:51 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.765<-13451 Statuses=0009 0009 16:38:51 Msec=0 True Az=152.97 Ze=-21.765 Az status=0009 Ze status=0009 16:38:51 Check angles 16:38:51 SkyScan query 16:38:52 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.78<-12052 Statuses=0009 0009 16:38:52 Msec=750 True Az=135.57 Ze=-0.78 Az status=0009 Ze status=0009 16:38:52 Check angles 16:38:52 SkyScan query 16:38:53 SkyScan query done: ret=0 az=117.87<-7858 ze=20.13<-10658 Statuses=0009 0009 16:38:53 Msec=1500 True Az=117.87 Ze=20.13 Az status=0009 Ze status=0009 16:38:53 Check angles 16:38:53 SkyScan query 16:38:53 SkyScan query done: ret=0 az=100.62<-6708 ze=41.145<-9257 Statuses=0009 0009 16:38:53 Msec=2250 True Az=100.62 Ze=41.145 Az status=0009 Ze status=0009 16:38:54 Check angles 16:38:54 SkyScan query 16:38:54 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 16:38:54 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 16:38:54 Check angles 16:38:54 SkyScan query 16:38:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:38:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:38:55 Message to Master queued w/err=0: serial=122570 error=0 16:39:00 Received message from Master: op=Filter serial=122571 16:39:00 Color wheel filter change from 0 to 0 16:39:00 FLIGetFilterPos err=0 currentPosition=0 16:39:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:39:00 Filter is already there-color wheel unchanged 16:39:00 Received message from Master: op=Shutter serial=122572 16:39:00 Shutter LASER close 16:39:00 Received message from Camera: op=State serial=122574 16:39:00 GetSingleValue result=40 Value=cccccccc 16:39:00 SkyScan query 16:39:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:39:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:01 Parameters OK 16:39:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:01 Set A/D data flow result=40 16:39:01 Set A/D channel type result=40 16:39:01 Set A/D encoding result=40 16:39:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:01 Set channel filter=0.000000e+000 result=40 16:39:01 Config A/D Result=40 16:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:01 Get A/D filter: -9.255963e+061 result=40 16:39:01 Get A/D value=-858993460 result=40 16:39:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:01 Parameters OK 16:39:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:01 Set A/D data flow result=40 16:39:01 Set A/D channel type result=40 16:39:01 Set A/D encoding result=40 16:39:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:01 Set channel filter=0.000000e+000 result=40 16:39:01 Config A/D Result=40 16:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:01 Get A/D filter: -9.255963e+061 result=40 16:39:01 Get A/D value=-858993460 result=40 16:39:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:39:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:39:01 Aux= 16:39:01 Message to Camera, serial 122574 queued 16:39:38 Received message from Master: op=PointingHead serial=122587 16:39:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:39:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:39:38 Point started: ret=0 16:39:38 point_skyscan result=0 16:39:39 Check angles 16:39:39 SkyScan query 16:39:39 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 16:39:39 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 16:39:39 Check angles 16:39:39 SkyScan query 16:39:40 SkyScan query done: ret=0 az=127.155<-8477 ze=38.505<-9433 Statuses=0009 0008 16:39:40 Msec=750 True Az=127.155 Ze=38.505 Az status=0009 Ze status=0008 16:39:40 Check angles 16:39:40 SkyScan query 16:39:41 SkyScan query done: ret=0 az=145.035<-9669 ze=38.505<-9433 Statuses=0009 0008 16:39:41 Msec=1500 True Az=145.035 Ze=38.505 Az status=0009 Ze status=0008 16:39:41 Check angles 16:39:41 SkyScan query 16:39:41 SkyScan query done: ret=0 az=162.525<-10835 ze=38.505<-9433 Statuses=0009 0008 16:39:41 Msec=2250 True Az=162.525 Ze=38.505 Az status=0009 Ze status=0008 16:39:42 Check angles 16:39:42 SkyScan query 16:39:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:39:42 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:39:42 Check angles 16:39:42 SkyScan query 16:39:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:39:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:39:43 Message to Master queued w/err=0: serial=122587 error=0 16:39:48 Received message from Master: op=Filter serial=122588 16:39:48 Color wheel filter change from 0 to 0 16:39:48 FLIGetFilterPos err=0 currentPosition=0 16:39:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:39:48 Filter is already there-color wheel unchanged 16:39:48 Received message from Master: op=Shutter serial=122589 16:39:48 Shutter LASER close 16:39:48 Received message from Camera: op=State serial=122591 16:39:48 GetSingleValue result=40 Value=cccccccc 16:39:48 SkyScan query 16:39:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:39:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:49 Parameters OK 16:39:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:49 Set A/D data flow result=40 16:39:49 Set A/D channel type result=40 16:39:49 Set A/D encoding result=40 16:39:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:49 Set channel filter=0.000000e+000 result=40 16:39:49 Config A/D Result=40 16:39:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:49 Get A/D filter: -9.255963e+061 result=40 16:39:49 Get A/D value=-858993460 result=40 16:39:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:49 Parameters OK 16:39:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:49 Set A/D data flow result=40 16:39:49 Set A/D channel type result=40 16:39:49 Set A/D encoding result=40 16:39:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:49 Set channel filter=0.000000e+000 result=40 16:39:49 Config A/D Result=40 16:39:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:49 Get A/D filter: -9.255963e+061 result=40 16:39:49 Get A/D value=-858993460 result=40 16:39:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:39:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:39:49 Aux= 16:39:49 Message to Camera, serial 122591 queued 16:40:26 Received message from Master: op=PointingHead serial=122604 16:40:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:40:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:40:26 Point started: ret=0 16:40:26 point_skyscan result=0 16:40:27 Check angles 16:40:27 SkyScan query 16:40:27 SkyScan query done: ret=0 az=152.715<-10181 ze=8.22<-11452 Statuses=0009 0009 16:40:27 Msec=0 True Az=152.715 Ze=8.22 Az status=0009 Ze status=0009 16:40:27 Check angles 16:40:27 SkyScan query 16:40:28 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.72<-12848 Statuses=0009 0009 16:40:28 Msec=750 True Az=135.165 Ze=-12.72 Az status=0009 Ze status=0009 16:40:28 Check angles 16:40:28 SkyScan query 16:40:29 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.675<-14245 Statuses=0009 0009 16:40:29 Msec=1500 True Az=117.615 Ze=-33.675 Az status=0009 Ze status=0009 16:40:29 Check angles 16:40:29 SkyScan query 16:40:30 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 16:40:30 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 16:40:30 Check angles 16:40:30 SkyScan query 16:40:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:40:30 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:40:30 Check angles 16:40:30 SkyScan query 16:40:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:40:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:40:31 Message to Master queued w/err=0: serial=122604 error=0 16:40:36 Received message from Master: op=Filter serial=122605 16:40:36 Color wheel filter change from 0 to 0 16:40:36 FLIGetFilterPos err=0 currentPosition=0 16:40:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:40:36 Filter is already there-color wheel unchanged 16:40:36 Received message from Master: op=Shutter serial=122606 16:40:36 Shutter LASER close 16:40:36 Received message from Camera: op=State serial=122608 16:40:36 GetSingleValue result=40 Value=cccccccc 16:40:36 SkyScan query 16:40:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:40:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:37 Parameters OK 16:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:37 Set A/D data flow result=40 16:40:37 Set A/D channel type result=40 16:40:37 Set A/D encoding result=40 16:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:37 Set channel filter=0.000000e+000 result=40 16:40:37 Config A/D Result=40 16:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:37 Get A/D filter: -9.255963e+061 result=40 16:40:37 Get A/D value=-858993460 result=40 16:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:37 Parameters OK 16:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:37 Set A/D data flow result=40 16:40:37 Set A/D channel type result=40 16:40:37 Set A/D encoding result=40 16:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:37 Set channel filter=0.000000e+000 result=40 16:40:37 Config A/D Result=40 16:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:37 Get A/D filter: -9.255963e+061 result=40 16:40:37 Get A/D value=-858993460 result=40 16:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:40:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:40:37 Aux= 16:40:37 Message to Camera, serial 122608 queued 16:41:14 Received message from Master: op=PointingHead serial=122621 16:41:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:41:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:41:14 Point started: ret=0 16:41:14 point_skyscan result=0 16:41:15 Check angles 16:41:15 SkyScan query 16:41:15 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.81<-17454 Statuses=0009 0009 16:41:15 Msec=0 True Az=109.395 Ze=-81.81 Az status=0009 Ze status=0009 16:41:16 Check angles 16:41:16 SkyScan query 16:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.69<-18846 Statuses=0008 0009 16:41:16 Msec=750 True Az=112.995 Ze=-102.69 Az status=0008 Ze status=0009 16:41:16 Check angles 16:41:16 SkyScan query 16:41:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 16:41:17 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 16:41:17 Check angles 16:41:17 SkyScan query 16:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 16:41:18 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 16:41:18 Check angles 16:41:18 SkyScan query 16:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 16:41:18 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 16:41:19 Check angles 16:41:19 SkyScan query 16:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:41:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:41:19 Message to Master queued w/err=0: serial=122621 error=0 16:41:24 Received message from Master: op=Filter serial=122622 16:41:24 Color wheel filter change from 0 to 0 16:41:24 FLIGetFilterPos err=0 currentPosition=0 16:41:24 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:24 Filter is already there-color wheel unchanged 16:41:24 Received message from Master: op=Shutter serial=122623 16:41:24 Shutter LASER open 16:41:24 Received message from Camera: op=State serial=122625 16:41:24 GetSingleValue result=40 Value=cccccccc 16:41:24 SkyScan query 16:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:25 Parameters OK 16:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:25 Set A/D data flow result=40 16:41:25 Set A/D channel type result=40 16:41:25 Set A/D encoding result=40 16:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:25 Set channel filter=0.000000e+000 result=40 16:41:25 Config A/D Result=40 16:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:25 Get A/D filter: -9.255963e+061 result=40 16:41:25 Get A/D value=-858993460 result=40 16:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:25 Parameters OK 16:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:25 Set A/D data flow result=40 16:41:25 Set A/D channel type result=40 16:41:25 Set A/D encoding result=40 16:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:25 Set channel filter=0.000000e+000 result=40 16:41:25 Config A/D Result=40 16:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:25 Get A/D filter: -9.255963e+061 result=40 16:41:25 Get A/D value=-858993460 result=40 16:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:25 Aux= 16:41:25 Message to Camera, serial 122625 queued 16:41:33 Received message from Master: op=Shutter serial=122635 16:41:33 Shutter LASER close 16:41:34 Received message from Master: op=PointingHead serial=122639 16:41:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:41:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:41:34 Point started: ret=0 16:41:34 point_skyscan result=0 16:41:35 Check angles 16:41:35 SkyScan query 16:41:36 SkyScan query done: ret=0 az=90.015<-6001 ze=157.515<-1499 Statuses=0009 0009 16:41:36 Msec=0 True Az=90.015 Ze=157.515 Az status=0009 Ze status=0009 16:41:36 Check angles 16:41:36 SkyScan query 16:41:36 SkyScan query done: ret=0 az=72.54<-4836 ze=136.53<-2898 Statuses=0009 0009 16:41:36 Msec=750 True Az=72.54 Ze=136.53 Az status=0009 Ze status=0009 16:41:36 Check angles 16:41:36 SkyScan query 16:41:37 SkyScan query done: ret=0 az=55.08<-3672 ze=115.605<-4293 Statuses=0009 0009 16:41:37 Msec=1500 True Az=55.08 Ze=115.605 Az status=0009 Ze status=0009 16:41:37 Check angles 16:41:37 SkyScan query 16:41:38 SkyScan query done: ret=0 az=40.965<-2731 ze=94.605<-5693 Statuses=0009 0009 16:41:38 Msec=2250 True Az=40.965 Ze=94.605 Az status=0009 Ze status=0009 16:41:38 Check angles 16:41:38 SkyScan query 16:41:39 SkyScan query done: ret=0 az=40.995<-2733 ze=73.695<-7087 Statuses=0008 0009 16:41:39 Msec=3000 True Az=40.995 Ze=73.695 Az status=0008 Ze status=0009 16:41:39 Check angles 16:41:39 SkyScan query 16:41:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.995<-8467 Statuses=0008 0009 16:41:39 Msec=3750 True Az=40.995 Ze=52.995 Az status=0008 Ze status=0009 16:41:39 Check angles 16:41:39 SkyScan query 16:41:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:41:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:41:40 Message to Master queued w/err=0: serial=122639 error=0 16:41:45 Received message from Master: op=Filter serial=122640 16:41:45 Color wheel filter change from 0 to 0 16:41:45 FLIGetFilterPos err=0 currentPosition=0 16:41:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:45 Filter is already there-color wheel unchanged 16:41:45 Received message from Master: op=Shutter serial=122641 16:41:45 Shutter LASER close 16:41:45 Received message from Camera: op=State serial=122643 16:41:45 GetSingleValue result=40 Value=cccccccc 16:41:45 SkyScan query 16:41:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:41:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:46 Parameters OK 16:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:46 Set A/D data flow result=40 16:41:46 Set A/D channel type result=40 16:41:46 Set A/D encoding result=40 16:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:46 Set channel filter=0.000000e+000 result=40 16:41:46 Config A/D Result=40 16:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:46 Get A/D filter: -9.255963e+061 result=40 16:41:46 Get A/D value=-858993460 result=40 16:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:46 Parameters OK 16:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:46 Set A/D data flow result=40 16:41:46 Set A/D channel type result=40 16:41:46 Set A/D encoding result=40 16:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:46 Set channel filter=0.000000e+000 result=40 16:41:46 Config A/D Result=40 16:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:46 Get A/D filter: -9.255963e+061 result=40 16:41:46 Get A/D value=-858993460 result=40 16:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:46 Aux= 16:41:46 Message to Camera, serial 122643 queued 16:42:23 Received message from Master: op=PointingHead serial=122656 16:42:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:42:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:42:23 Point started: ret=0 16:42:23 point_skyscan result=0 16:42:24 Check angles 16:42:24 SkyScan query 16:42:25 SkyScan query done: ret=0 az=64.275<-4285 ze=66.555<-7563 Statuses=0009 0008 16:42:25 Msec=0 True Az=64.275 Ze=66.555 Az status=0009 Ze status=0008 16:42:25 Check angles 16:42:25 SkyScan query 16:42:25 SkyScan query done: ret=0 az=81.72<-5448 ze=66.495<-7567 Statuses=0009 0008 16:42:25 Msec=750 True Az=81.72 Ze=66.495 Az status=0009 Ze status=0008 16:42:25 Check angles 16:42:25 SkyScan query 16:42:26 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 16:42:26 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 16:42:26 Check angles 16:42:26 SkyScan query 16:42:27 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 16:42:27 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 16:42:27 Check angles 16:42:27 SkyScan query 16:42:28 SkyScan query done: ret=0 az=134.1<-8940 ze=66.495<-7567 Statuses=0009 0008 16:42:28 Msec=3000 True Az=134.1 Ze=66.495 Az status=0009 Ze status=0008 16:42:28 Check angles 16:42:28 SkyScan query 16:42:28 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 16:42:28 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 16:42:28 Check angles 16:42:28 SkyScan query 16:42:29 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:42:29 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:42:29 Message to Master queued w/err=0: serial=122656 error=0 16:42:34 Received message from Master: op=Filter serial=122657 16:42:34 Color wheel filter change from 0 to 0 16:42:34 FLIGetFilterPos err=0 currentPosition=0 16:42:34 FLIGetStepsRemaining err=0 RemainingSteps=0 16:42:34 Filter is already there-color wheel unchanged 16:42:34 Received message from Master: op=Shutter serial=122658 16:42:34 Shutter LASER close 16:42:34 Received message from Camera: op=State serial=122660 16:42:34 GetSingleValue result=40 Value=cccccccc 16:42:34 SkyScan query 16:42:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:42:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:35 Parameters OK 16:42:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:35 Set A/D data flow result=40 16:42:35 Set A/D channel type result=40 16:42:35 Set A/D encoding result=40 16:42:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:35 Set channel filter=0.000000e+000 result=40 16:42:35 Config A/D Result=40 16:42:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:35 Get A/D filter: -9.255963e+061 result=40 16:42:35 Get A/D value=-858993460 result=40 16:42:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:35 Parameters OK 16:42:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:35 Set A/D data flow result=40 16:42:35 Set A/D channel type result=40 16:42:35 Set A/D encoding result=40 16:42:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:35 Set channel filter=0.000000e+000 result=40 16:42:35 Config A/D Result=40 16:42:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:35 Get A/D filter: -9.255963e+061 result=40 16:42:35 Get A/D value=-858993460 result=40 16:42:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:42:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:42:35 Aux= 16:42:35 Message to Camera, serial 122660 queued 16:43:12 Received message from Master: op=PointingHead serial=122673 16:43:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:43:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:43:12 Point started: ret=0 16:43:12 point_skyscan result=0 16:43:13 Check angles 16:43:13 SkyScan query 16:43:13 SkyScan query done: ret=0 az=134.82<-8988 ze=36.645<-9557 Statuses=0009 0009 16:43:13 Msec=0 True Az=134.82 Ze=36.645 Az status=0009 Ze status=0009 16:43:14 Check angles 16:43:14 SkyScan query 16:43:14 SkyScan query done: ret=0 az=117.465<-7831 ze=15.705<-10953 Statuses=0009 0009 16:43:14 Msec=750 True Az=117.465 Ze=15.705 Az status=0009 Ze status=0009 16:43:14 Check angles 16:43:14 SkyScan query 16:43:15 SkyScan query done: ret=0 az=100.08<-6672 ze=-5.265<-12351 Statuses=0009 0009 16:43:15 Msec=1500 True Az=100.08 Ze=-5.265 Az status=0009 Ze status=0009 16:43:15 Check angles 16:43:15 SkyScan query 16:43:16 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.22<-13748 Statuses=0009 0009 16:43:16 Msec=2250 True Az=82.47 Ze=-26.22 Az status=0009 Ze status=0009 16:43:16 Check angles 16:43:16 SkyScan query 16:43:16 SkyScan query done: ret=0 az=65.115<-4341 ze=-38.565<-14571 Statuses=0009 0008 16:43:16 Msec=3000 True Az=65.115 Ze=-38.565 Az status=0009 Ze status=0008 16:43:17 Check angles 16:43:17 SkyScan query 16:43:17 SkyScan query done: ret=0 az=47.67<-3178 ze=-38.535<-14569 Statuses=0009 0008 16:43:17 Msec=3750 True Az=47.67 Ze=-38.535 Az status=0009 Ze status=0008 16:43:17 Check angles 16:43:17 SkyScan query 16:43:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:43:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:43:18 Message to Master queued w/err=0: serial=122673 error=0 16:43:23 Received message from Master: op=Filter serial=122674 16:43:23 Color wheel filter change from 0 to 0 16:43:23 FLIGetFilterPos err=0 currentPosition=0 16:43:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:23 Filter is already there-color wheel unchanged 16:43:23 Received message from Master: op=Shutter serial=122675 16:43:23 Shutter LASER close 16:43:23 Received message from Camera: op=State serial=122677 16:43:23 GetSingleValue result=40 Value=cccccccc 16:43:23 SkyScan query 16:43:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:43:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:24 Parameters OK 16:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:24 Set A/D data flow result=40 16:43:24 Set A/D channel type result=40 16:43:24 Set A/D encoding result=40 16:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:24 Set channel filter=0.000000e+000 result=40 16:43:24 Config A/D Result=40 16:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:24 Get A/D filter: -9.255963e+061 result=40 16:43:24 Get A/D value=-858993460 result=40 16:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:24 Parameters OK 16:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:24 Set A/D data flow result=40 16:43:24 Set A/D channel type result=40 16:43:24 Set A/D encoding result=40 16:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:24 Set channel filter=0.000000e+000 result=40 16:43:24 Config A/D Result=40 16:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:24 Get A/D filter: -9.255963e+061 result=40 16:43:24 Get A/D value=-858993460 result=40 16:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:24 Aux= 16:43:24 Message to Camera, serial 122677 queued 16:44:00 Received message from Master: op=PointingHead serial=122690 16:44:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:44:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:44:01 Point started: ret=0 16:44:01 point_skyscan result=0 16:44:02 Check angles 16:44:02 SkyScan query 16:44:02 SkyScan query done: ret=0 az=63.78<-4252 ze=-67.98<-16532 Statuses=0009 0009 16:44:02 Msec=0 True Az=63.78 Ze=-67.98 Az status=0009 Ze status=0009 16:44:02 Check angles 16:44:02 SkyScan query 16:44:03 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.445<-17963 Statuses=0009 0009 16:44:03 Msec=750 True Az=81.57 Ze=-89.445 Az status=0009 Ze status=0009 16:44:03 Check angles 16:44:03 SkyScan query 16:44:04 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.37<-19358 Statuses=0009 0009 16:44:04 Msec=1500 True Az=99.06 Ze=-110.37 Az status=0009 Ze status=0009 16:44:04 Check angles 16:44:04 SkyScan query 16:44:04 SkyScan query done: ret=0 az=116.58<-7772 ze=-131.325<-20755 Statuses=0009 0009 16:44:04 Msec=2250 True Az=116.58 Ze=-131.325 Az status=0009 Ze status=0009 16:44:05 Check angles 16:44:05 SkyScan query 16:44:05 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 16:44:05 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 16:44:05 Check angles 16:44:05 SkyScan query 16:44:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:44:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:44:06 Message to Master queued w/err=0: serial=122690 error=0 16:44:11 Received message from Master: op=Filter serial=122691 16:44:11 Color wheel filter change from 0 to 0 16:44:11 FLIGetFilterPos err=0 currentPosition=0 16:44:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:44:11 Filter is already there-color wheel unchanged 16:44:11 Received message from Master: op=Shutter serial=122692 16:44:11 Shutter LASER close 16:44:11 Received message from Camera: op=State serial=122694 16:44:11 GetSingleValue result=40 Value=cccccccc 16:44:11 SkyScan query 16:44:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:44:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:12 Parameters OK 16:44:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:12 Set A/D data flow result=40 16:44:12 Set A/D channel type result=40 16:44:12 Set A/D encoding result=40 16:44:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:12 Set channel filter=0.000000e+000 result=40 16:44:12 Config A/D Result=40 16:44:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:12 Get A/D filter: -9.255963e+061 result=40 16:44:12 Get A/D value=-858993460 result=40 16:44:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:12 Parameters OK 16:44:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:12 Set A/D data flow result=40 16:44:12 Set A/D channel type result=40 16:44:12 Set A/D encoding result=40 16:44:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:12 Set channel filter=0.000000e+000 result=40 16:44:12 Config A/D Result=40 16:44:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:12 Get A/D filter: -9.255963e+061 result=40 16:44:12 Get A/D value=-858993460 result=40 16:44:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:44:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:44:12 Aux= 16:44:12 Message to Camera, serial 122694 queued 16:44:49 Received message from Master: op=PointingHead serial=122707 16:44:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:44:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:44:49 Point started: ret=0 16:44:49 point_skyscan result=0 16:44:50 Check angles 16:44:50 SkyScan query 16:44:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 16:44:50 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 16:44:50 Check angles 16:44:50 SkyScan query 16:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:44:51 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:44:51 Message to Master queued w/err=0: serial=122707 error=0 16:44:56 Received message from Master: op=Filter serial=122708 16:44:56 Color wheel filter change from 0 to 0 16:44:56 FLIGetFilterPos err=0 currentPosition=0 16:44:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:44:56 Filter is already there-color wheel unchanged 16:44:56 Received message from Master: op=Shutter serial=122709 16:44:56 Shutter LASER open 16:44:56 Received message from Camera: op=State serial=122711 16:44:56 GetSingleValue result=40 Value=cccccccc 16:44:56 SkyScan query 16:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:44:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:57 Parameters OK 16:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:57 Set A/D data flow result=40 16:44:57 Set A/D channel type result=40 16:44:57 Set A/D encoding result=40 16:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:57 Set channel filter=0.000000e+000 result=40 16:44:57 Config A/D Result=40 16:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:57 Get A/D filter: -9.255963e+061 result=40 16:44:57 Get A/D value=-858993460 result=40 16:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:57 Parameters OK 16:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:57 Set A/D data flow result=40 16:44:57 Set A/D channel type result=40 16:44:57 Set A/D encoding result=40 16:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:57 Set channel filter=0.000000e+000 result=40 16:44:57 Config A/D Result=40 16:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:57 Get A/D filter: -9.255963e+061 result=40 16:44:57 Get A/D value=-858993460 result=40 16:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:44:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:44:57 Aux= 16:44:57 Message to Camera, serial 122711 queued 16:45:05 Received message from Master: op=Shutter serial=122721 16:45:05 Shutter LASER close 16:45:06 Received message from Master: op=PointingHead serial=122725 16:45:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:45:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:45:06 Point started: ret=0 16:45:06 point_skyscan result=0 16:45:07 Check angles 16:45:07 SkyScan query 16:45:08 SkyScan query done: ret=0 az=136.23<-9082 ze=-143.16<-21544 Statuses=0009 0009 16:45:08 Msec=0 True Az=136.23 Ze=-143.16 Az status=0009 Ze status=0009 16:45:08 Check angles 16:45:08 SkyScan query 16:45:08 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.175<-20145 Statuses=0009 0009 16:45:08 Msec=750 True Az=153.57 Ze=-122.175 Az status=0009 Ze status=0009 16:45:09 Check angles 16:45:09 SkyScan query 16:45:09 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.295<-18753 Statuses=0009 0009 16:45:09 Msec=1500 True Az=171.105 Ze=-101.295 Az status=0009 Ze status=0009 16:45:09 Check angles 16:45:09 SkyScan query 16:45:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.295<-17353 Statuses=0008 0009 16:45:10 Msec=2250 True Az=176.01 Ze=-80.295 Az status=0008 Ze status=0009 16:45:10 Check angles 16:45:10 SkyScan query 16:45:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.34<-15956 Statuses=0008 0009 16:45:11 Msec=3000 True Az=176.01 Ze=-59.34 Az status=0008 Ze status=0009 16:45:11 Check angles 16:45:11 SkyScan query 16:45:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:45:11 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:45:11 Message to Master queued w/err=0: serial=122725 error=0 16:45:16 Received message from Master: op=Filter serial=122726 16:45:16 Color wheel filter change from 0 to 0 16:45:16 FLIGetFilterPos err=0 currentPosition=0 16:45:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:16 Filter is already there-color wheel unchanged 16:45:17 Received message from Master: op=Shutter serial=122727 16:45:17 Shutter LASER close 16:45:17 Received message from Camera: op=State serial=122729 16:45:17 GetSingleValue result=40 Value=cccccccc 16:45:17 SkyScan query 16:45:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:45:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:17 Parameters OK 16:45:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:17 Set A/D data flow result=40 16:45:17 Set A/D channel type result=40 16:45:17 Set A/D encoding result=40 16:45:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:17 Set channel filter=0.000000e+000 result=40 16:45:17 Config A/D Result=40 16:45:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:17 Get A/D filter: -9.255963e+061 result=40 16:45:17 Get A/D value=-858993460 result=40 16:45:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:17 Parameters OK 16:45:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:17 Set A/D data flow result=40 16:45:17 Set A/D channel type result=40 16:45:17 Set A/D encoding result=40 16:45:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:17 Set channel filter=0.000000e+000 result=40 16:45:17 Config A/D Result=40 16:45:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:17 Get A/D filter: -9.255963e+061 result=40 16:45:17 Get A/D value=-858993460 result=40 16:45:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:17 Aux= 16:45:17 Message to Camera, serial 122729 queued 16:45:27 Received message from Master: op=Identify serial=122730 16:45:53 Received message from Master: op=PointingHead serial=122744 16:45:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:45:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:45:54 Point started: ret=0 16:45:54 point_skyscan result=0 16:45:54 Check angles 16:45:54 SkyScan query 16:45:55 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.975<-13465 Statuses=0009 0009 16:45:55 Msec=0 True Az=153.18 Ze=-21.975 Az status=0009 Ze status=0009 16:45:55 Check angles 16:45:55 SkyScan query 16:45:56 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.99<-12066 Statuses=0009 0009 16:45:56 Msec=750 True Az=135.735 Ze=-0.99 Az status=0009 Ze status=0009 16:45:56 Check angles [UTC 2018-12-13 16:45:56] 16:45:56 SkyScan query 16:45:56 SkyScan query done: ret=0 az=116.745<-7783 ze=21.705<-10553 Statuses=0009 0009 16:45:56 Msec=1500 True Az=116.745 Ze=21.705 Az status=0009 Ze status=0009 16:45:57 Check angles 16:45:57 SkyScan query 16:45:57 SkyScan query done: ret=0 az=100.77<-6718 ze=40.935<-9271 Statuses=0009 0009 16:45:57 Msec=2250 True Az=100.77 Ze=40.935 Az status=0009 Ze status=0009 16:45:57 Check angles 16:45:57 SkyScan query 16:45:58 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:45:58 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:45:58 Check angles 16:45:58 SkyScan query 16:45:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:45:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:45:59 Message to Master queued w/err=0: serial=122744 error=0 16:46:04 Received message from Master: op=Filter serial=122745 16:46:04 Color wheel filter change from 0 to 0 16:46:04 FLIGetFilterPos err=0 currentPosition=0 16:46:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:46:04 Filter is already there-color wheel unchanged 16:46:04 Received message from Master: op=Shutter serial=122746 16:46:04 Shutter LASER close 16:46:04 Received message from Camera: op=State serial=122748 16:46:04 GetSingleValue result=40 Value=cccccccc 16:46:04 SkyScan query 16:46:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:46:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:04 Parameters OK 16:46:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:04 Set A/D data flow result=40 16:46:04 Set A/D channel type result=40 16:46:04 Set A/D encoding result=40 16:46:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:04 Set channel filter=0.000000e+000 result=40 16:46:04 Config A/D Result=40 16:46:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:04 Get A/D filter: -9.255963e+061 result=40 16:46:04 Get A/D value=-858993460 result=40 16:46:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:04 Parameters OK 16:46:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:04 Set A/D data flow result=40 16:46:04 Set A/D channel type result=40 16:46:04 Set A/D encoding result=40 16:46:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:04 Set channel filter=0.000000e+000 result=40 16:46:04 Config A/D Result=40 16:46:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:04 Get A/D filter: -9.255963e+061 result=40 16:46:04 Get A/D value=-858993460 result=40 16:46:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:46:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:46:04 Aux= 16:46:04 Message to Camera, serial 122748 queued 16:46:41 Received message from Master: op=PointingHead serial=122761 16:46:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:46:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:46:42 Point started: ret=0 16:46:42 point_skyscan result=0 16:46:42 Check angles 16:46:42 SkyScan query 16:46:43 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 16:46:43 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 16:46:43 Check angles 16:46:43 SkyScan query 16:46:44 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 16:46:44 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 16:46:44 Check angles 16:46:44 SkyScan query 16:46:44 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 16:46:44 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 16:46:45 Check angles 16:46:45 SkyScan query 16:46:45 SkyScan query done: ret=0 az=162.165<-10811 ze=38.505<-9433 Statuses=0009 0008 16:46:45 Msec=2250 True Az=162.165 Ze=38.505 Az status=0009 Ze status=0008 16:46:45 Check angles 16:46:45 SkyScan query 16:46:46 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:46:46 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:46:46 Check angles 16:46:46 SkyScan query 16:46:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:46:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:46:47 Message to Master queued w/err=0: serial=122761 error=0 16:46:52 Received message from Master: op=Filter serial=122762 16:46:52 Color wheel filter change from 0 to 0 16:46:52 FLIGetFilterPos err=0 currentPosition=0 16:46:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:46:52 Filter is already there-color wheel unchanged 16:46:52 Received message from Master: op=Shutter serial=122763 16:46:52 Shutter LASER close 16:46:52 Received message from Camera: op=State serial=122765 16:46:52 GetSingleValue result=40 Value=cccccccc 16:46:52 SkyScan query 16:46:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:46:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:53 Parameters OK 16:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:53 Set A/D data flow result=40 16:46:53 Set A/D channel type result=40 16:46:53 Set A/D encoding result=40 16:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:53 Set channel filter=0.000000e+000 result=40 16:46:53 Config A/D Result=40 16:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:53 Get A/D filter: -9.255963e+061 result=40 16:46:53 Get A/D value=-858993460 result=40 16:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:53 Parameters OK 16:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:53 Set A/D data flow result=40 16:46:53 Set A/D channel type result=40 16:46:53 Set A/D encoding result=40 16:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:53 Set channel filter=0.000000e+000 result=40 16:46:53 Config A/D Result=40 16:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:53 Get A/D filter: -9.255963e+061 result=40 16:46:53 Get A/D value=-858993460 result=40 16:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:46:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:46:53 Aux= 16:46:53 Message to Camera, serial 122765 queued 16:47:28 Received message from Master: op=PointingHead serial=122777 16:47:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:47:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:47:29 Point started: ret=0 16:47:29 point_skyscan result=0 16:47:30 Check angles 16:47:30 SkyScan query 16:47:30 SkyScan query done: ret=0 az=152.97<-10198 ze=8.775<-11415 Statuses=0009 0009 16:47:30 Msec=0 True Az=152.97 Ze=8.775 Az status=0009 Ze status=0009 16:47:30 Check angles 16:47:30 SkyScan query 16:47:31 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.225<-12815 Statuses=0009 0009 16:47:31 Msec=750 True Az=135.6 Ze=-12.225 Az status=0009 Ze status=0009 16:47:31 Check angles 16:47:31 SkyScan query 16:47:32 SkyScan query done: ret=0 az=117.96<-7864 ze=-33.12<-14208 Statuses=0009 0009 16:47:32 Msec=1500 True Az=117.96 Ze=-33.12 Az status=0009 Ze status=0009 16:47:32 Check angles 16:47:32 SkyScan query 16:47:32 SkyScan query done: ret=0 az=100.65<-6710 ze=-51.525<-15435 Statuses=0009 0009 16:47:32 Msec=2250 True Az=100.65 Ze=-51.525 Az status=0009 Ze status=0009 16:47:33 Check angles 16:47:33 SkyScan query 16:47:33 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:47:33 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:47:33 Check angles 16:47:33 SkyScan query 16:47:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:47:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:47:34 Message to Master queued w/err=0: serial=122777 error=0 16:47:39 Received message from Master: op=Filter serial=122778 16:47:39 Color wheel filter change from 0 to 0 16:47:39 FLIGetFilterPos err=0 currentPosition=0 16:47:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:47:39 Filter is already there-color wheel unchanged 16:47:39 Received message from Master: op=Shutter serial=122779 16:47:39 Shutter LASER close 16:47:39 Received message from Camera: op=State serial=122781 16:47:39 GetSingleValue result=40 Value=cccccccc 16:47:39 SkyScan query 16:47:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:47:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:40 Parameters OK 16:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:40 Set A/D data flow result=40 16:47:40 Set A/D channel type result=40 16:47:40 Set A/D encoding result=40 16:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:40 Set channel filter=0.000000e+000 result=40 16:47:40 Config A/D Result=40 16:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:40 Get A/D filter: -9.255963e+061 result=40 16:47:40 Get A/D value=-858993460 result=40 16:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:40 Parameters OK 16:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:40 Set A/D data flow result=40 16:47:40 Set A/D channel type result=40 16:47:40 Set A/D encoding result=40 16:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:40 Set channel filter=0.000000e+000 result=40 16:47:40 Config A/D Result=40 16:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:40 Get A/D filter: -9.255963e+061 result=40 16:47:40 Get A/D value=-858993460 result=40 16:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:47:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:47:40 Aux= 16:47:40 Message to Camera, serial 122781 queued 16:48:17 Received message from Master: op=PointingHead serial=122794 16:48:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:48:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:48:17 Point started: ret=0 16:48:17 point_skyscan result=0 16:48:18 Check angles 16:48:18 SkyScan query 16:48:18 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.09<-17406 Statuses=0009 0009 16:48:18 Msec=0 True Az=108.885 Ze=-81.09 Az status=0009 Ze status=0009 16:48:18 Check angles 16:48:18 SkyScan query 16:48:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 16:48:19 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 16:48:19 Check angles 16:48:19 SkyScan query 16:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 16:48:20 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 16:48:20 Check angles 16:48:20 SkyScan query 16:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 16:48:20 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 16:48:21 Check angles 16:48:21 SkyScan query 16:48:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 16:48:21 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 16:48:21 Check angles 16:48:21 SkyScan query 16:48:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:48:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:48:22 Message to Master queued w/err=0: serial=122794 error=0 16:48:27 Received message from Master: op=Filter serial=122795 16:48:27 Color wheel filter change from 0 to 0 16:48:27 FLIGetFilterPos err=0 currentPosition=0 16:48:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:27 Filter is already there-color wheel unchanged 16:48:27 Received message from Master: op=Shutter serial=122796 16:48:27 Shutter LASER open 16:48:27 Received message from Camera: op=State serial=122798 16:48:27 GetSingleValue result=40 Value=cccccccc 16:48:27 SkyScan query 16:48:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:48:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:28 Parameters OK 16:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:28 Set A/D data flow result=40 16:48:28 Set A/D channel type result=40 16:48:28 Set A/D encoding result=40 16:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:28 Set channel filter=0.000000e+000 result=40 16:48:28 Config A/D Result=40 16:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:28 Get A/D filter: -9.255963e+061 result=40 16:48:28 Get A/D value=-858993460 result=40 16:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:28 Parameters OK 16:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:28 Set A/D data flow result=40 16:48:28 Set A/D channel type result=40 16:48:28 Set A/D encoding result=40 16:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:28 Set channel filter=0.000000e+000 result=40 16:48:28 Config A/D Result=40 16:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:28 Get A/D filter: -9.255963e+061 result=40 16:48:28 Get A/D value=-858993460 result=40 16:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:28 Aux= 16:48:28 Message to Camera, serial 122798 queued 16:48:36 Received message from Master: op=Shutter serial=122808 16:48:36 Shutter LASER close 16:48:37 Received message from Master: op=PointingHead serial=122812 16:48:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:48:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:48:37 Point started: ret=0 16:48:37 point_skyscan result=0 16:48:38 Check angles 16:48:38 SkyScan query 16:48:38 SkyScan query done: ret=0 az=90.15<-6010 ze=157.53<-1498 Statuses=0009 0009 16:48:38 Msec=0 True Az=90.15 Ze=157.53 Az status=0009 Ze status=0009 16:48:39 Check angles 16:48:39 SkyScan query 16:48:39 SkyScan query done: ret=0 az=72.3<-4820 ze=136.14<-2924 Statuses=0009 0009 16:48:39 Msec=750 True Az=72.3 Ze=136.14 Az status=0009 Ze status=0009 16:48:39 Check angles 16:48:39 SkyScan query 16:48:40 SkyScan query done: ret=0 az=54.615<-3641 ze=114.735<-4351 Statuses=0009 0009 16:48:40 Msec=1500 True Az=54.615 Ze=114.735 Az status=0009 Ze status=0009 16:48:40 Check angles 16:48:40 SkyScan query 16:48:41 SkyScan query done: ret=0 az=40.98<-2732 ze=93.36<-5776 Statuses=0009 0009 16:48:41 Msec=2250 True Az=40.98 Ze=93.36 Az status=0009 Ze status=0009 16:48:41 Check angles 16:48:41 SkyScan query 16:48:41 SkyScan query done: ret=0 az=40.995<-2733 ze=72.375<-7175 Statuses=0008 0009 16:48:41 Msec=3000 True Az=40.995 Ze=72.375 Az status=0008 Ze status=0009 16:48:42 Check angles 16:48:42 SkyScan query 16:48:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.05<-8530 Statuses=0008 0009 16:48:42 Msec=3750 True Az=40.995 Ze=52.05 Az status=0008 Ze status=0009 16:48:42 Check angles 16:48:42 SkyScan query 16:48:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:48:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:48:43 Message to Master queued w/err=0: serial=122812 error=0 16:48:48 Received message from Master: op=Filter serial=122813 16:48:48 Color wheel filter change from 0 to 0 16:48:48 FLIGetFilterPos err=0 currentPosition=0 16:48:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:48 Filter is already there-color wheel unchanged 16:48:48 Received message from Master: op=Shutter serial=122814 16:48:48 Shutter LASER close 16:48:48 Received message from Camera: op=State serial=122816 16:48:48 GetSingleValue result=40 Value=cccccccc 16:48:48 SkyScan query 16:48:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:48:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:49 Parameters OK 16:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:49 Set A/D data flow result=40 16:48:49 Set A/D channel type result=40 16:48:49 Set A/D encoding result=40 16:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:49 Set channel filter=0.000000e+000 result=40 16:48:49 Config A/D Result=40 16:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:49 Get A/D filter: -9.255963e+061 result=40 16:48:49 Get A/D value=-858993460 result=40 16:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:49 Parameters OK 16:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:49 Set A/D data flow result=40 16:48:49 Set A/D channel type result=40 16:48:49 Set A/D encoding result=40 16:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:49 Set channel filter=0.000000e+000 result=40 16:48:49 Config A/D Result=40 16:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:49 Get A/D filter: -9.255963e+061 result=40 16:48:49 Get A/D value=-858993460 result=40 16:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:49 Aux= 16:48:49 Message to Camera, serial 122816 queued 16:49:26 Received message from Master: op=PointingHead serial=122829 16:49:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:49:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:49:26 Point started: ret=0 16:49:26 point_skyscan result=0 16:49:27 Check angles 16:49:27 SkyScan query 16:49:27 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 16:49:27 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 16:49:28 Check angles 16:49:28 SkyScan query 16:49:28 SkyScan query done: ret=0 az=81.27<-5418 ze=66.495<-7567 Statuses=0009 0008 16:49:28 Msec=750 True Az=81.27 Ze=66.495 Az status=0009 Ze status=0008 16:49:28 Check angles 16:49:28 SkyScan query 16:49:29 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 16:49:29 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 16:49:29 Check angles 16:49:29 SkyScan query 16:49:30 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 16:49:30 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 16:49:30 Check angles 16:49:30 SkyScan query 16:49:30 SkyScan query done: ret=0 az=134.1<-8940 ze=66.495<-7567 Statuses=0009 0008 16:49:30 Msec=3000 True Az=134.1 Ze=66.495 Az status=0009 Ze status=0008 16:49:31 Check angles 16:49:31 SkyScan query 16:49:31 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 16:49:31 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 16:49:31 Check angles 16:49:31 SkyScan query 16:49:32 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:49:32 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:49:32 Message to Master queued w/err=0: serial=122829 error=0 16:49:37 Received message from Master: op=Filter serial=122830 16:49:37 Color wheel filter change from 0 to 0 16:49:37 FLIGetFilterPos err=0 currentPosition=0 16:49:37 FLIGetStepsRemaining err=0 RemainingSteps=0 16:49:37 Filter is already there-color wheel unchanged 16:49:37 Received message from Master: op=Shutter serial=122831 16:49:37 Shutter LASER close 16:49:37 Received message from Camera: op=State serial=122833 16:49:37 GetSingleValue result=40 Value=cccccccc 16:49:37 SkyScan query 16:49:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:49:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:38 Parameters OK 16:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:38 Set A/D data flow result=40 16:49:38 Set A/D channel type result=40 16:49:38 Set A/D encoding result=40 16:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:38 Set channel filter=0.000000e+000 result=40 16:49:38 Config A/D Result=40 16:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:38 Get A/D filter: -9.255963e+061 result=40 16:49:38 Get A/D value=-858993460 result=40 16:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:38 Parameters OK 16:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:38 Set A/D data flow result=40 16:49:38 Set A/D channel type result=40 16:49:38 Set A/D encoding result=40 16:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:38 Set channel filter=0.000000e+000 result=40 16:49:38 Config A/D Result=40 16:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:38 Get A/D filter: -9.255963e+061 result=40 16:49:38 Get A/D value=-858993460 result=40 16:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:49:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:49:38 Aux= 16:49:38 Message to Camera, serial 122833 queued 16:50:15 Received message from Master: op=PointingHead serial=122846 16:50:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:50:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:50:15 Point started: ret=0 16:50:15 point_skyscan result=0 16:50:16 Check angles 16:50:16 SkyScan query 16:50:16 SkyScan query done: ret=0 az=134.925<-8995 ze=36.63<-9558 Statuses=0009 0009 16:50:16 Msec=0 True Az=134.925 Ze=36.63 Az status=0009 Ze status=0009 16:50:16 Check angles 16:50:16 SkyScan query 16:50:17 SkyScan query done: ret=0 az=117.075<-7805 ze=15.3<-10980 Statuses=0009 0009 16:50:17 Msec=750 True Az=117.075 Ze=15.3 Az status=0009 Ze status=0009 16:50:17 Check angles 16:50:17 SkyScan query 16:50:18 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.685<-12379 Statuses=0009 0009 16:50:18 Msec=1500 True Az=99.66 Ze=-5.685 Az status=0009 Ze status=0009 16:50:18 Check angles 16:50:18 SkyScan query 16:50:19 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.625<-13775 Statuses=0009 0009 16:50:19 Msec=2250 True Az=82.2 Ze=-26.625 Az status=0009 Ze status=0009 16:50:19 Check angles 16:50:19 SkyScan query 16:50:19 SkyScan query done: ret=0 az=64.335<-4289 ze=-38.565<-14571 Statuses=0009 0008 16:50:19 Msec=3000 True Az=64.335 Ze=-38.565 Az status=0009 Ze status=0008 16:50:19 Check angles 16:50:19 SkyScan query 16:50:20 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.52<-14568 Statuses=0009 0008 16:50:20 Msec=3750 True Az=46.935 Ze=-38.52 Az status=0009 Ze status=0008 16:50:20 Check angles 16:50:20 SkyScan query 16:50:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:50:21 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:50:21 Message to Master queued w/err=0: serial=122846 error=0 16:50:26 Received message from Master: op=Filter serial=122847 16:50:26 Color wheel filter change from 0 to 0 16:50:26 FLIGetFilterPos err=0 currentPosition=0 16:50:26 FLIGetStepsRemaining err=0 RemainingSteps=0 16:50:26 Filter is already there-color wheel unchanged 16:50:26 Received message from Master: op=Shutter serial=122848 16:50:26 Shutter LASER close 16:50:26 Received message from Camera: op=State serial=122850 16:50:26 GetSingleValue result=40 Value=cccccccc 16:50:26 SkyScan query 16:50:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:50:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:27 Parameters OK 16:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:27 Set A/D data flow result=40 16:50:27 Set A/D channel type result=40 16:50:27 Set A/D encoding result=40 16:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:27 Set channel filter=0.000000e+000 result=40 16:50:27 Config A/D Result=40 16:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:27 Get A/D filter: -9.255963e+061 result=40 16:50:27 Get A/D value=-858993460 result=40 16:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:27 Parameters OK 16:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:27 Set A/D data flow result=40 16:50:27 Set A/D channel type result=40 16:50:27 Set A/D encoding result=40 16:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:27 Set channel filter=0.000000e+000 result=40 16:50:27 Config A/D Result=40 16:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:27 Get A/D filter: -9.255963e+061 result=40 16:50:27 Get A/D value=-858993460 result=40 16:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:50:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:50:27 Aux= 16:50:27 Message to Camera, serial 122850 queued 16:51:03 Received message from Master: op=PointingHead serial=122863 16:51:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:51:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:51:04 Point started: ret=0 16:51:04 point_skyscan result=0 16:51:05 Check angles 16:51:05 SkyScan query 16:51:05 SkyScan query done: ret=0 az=64.53<-4302 ze=-68.865<-16591 Statuses=0009 0009 16:51:05 Msec=0 True Az=64.53 Ze=-68.865 Az status=0009 Ze status=0009 16:51:05 Check angles 16:51:05 SkyScan query 16:51:06 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.805<-17987 Statuses=0009 0009 16:51:06 Msec=750 True Az=81.9 Ze=-89.805 Az status=0009 Ze status=0009 16:51:06 Check angles 16:51:06 SkyScan query 16:51:07 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.79<-19386 Statuses=0009 0009 16:51:07 Msec=1500 True Az=99.39 Ze=-110.79 Az status=0009 Ze status=0009 16:51:07 Check angles 16:51:07 SkyScan query 16:51:07 SkyScan query done: ret=0 az=116.94<-7796 ze=-131.7<-20780 Statuses=0009 0009 16:51:07 Msec=2250 True Az=116.94 Ze=-131.7 Az status=0009 Ze status=0009 16:51:08 Check angles 16:51:08 SkyScan query 16:51:08 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 16:51:08 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 16:51:08 Check angles 16:51:08 SkyScan query 16:51:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:51:09 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:51:09 Message to Master queued w/err=0: serial=122863 error=0 16:51:14 Received message from Master: op=Filter serial=122864 16:51:14 Color wheel filter change from 0 to 0 16:51:14 FLIGetFilterPos err=0 currentPosition=0 16:51:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:14 Filter is already there-color wheel unchanged 16:51:14 Received message from Master: op=Shutter serial=122865 16:51:14 Shutter LASER close 16:51:14 Received message from Camera: op=State serial=122867 16:51:14 GetSingleValue result=40 Value=cccccccc 16:51:14 SkyScan query 16:51:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:51:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:15 Parameters OK 16:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:15 Set A/D data flow result=40 16:51:15 Set A/D channel type result=40 16:51:15 Set A/D encoding result=40 16:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:15 Set channel filter=0.000000e+000 result=40 16:51:15 Config A/D Result=40 16:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:15 Get A/D filter: -9.255963e+061 result=40 16:51:15 Get A/D value=-858993460 result=40 16:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:15 Parameters OK 16:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:15 Set A/D data flow result=40 16:51:15 Set A/D channel type result=40 16:51:15 Set A/D encoding result=40 16:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:15 Set channel filter=0.000000e+000 result=40 16:51:15 Config A/D Result=40 16:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:15 Get A/D filter: -9.255963e+061 result=40 16:51:15 Get A/D value=-858993460 result=40 16:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:51:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:51:15 Aux= 16:51:15 Message to Camera, serial 122867 queued 16:51:51 Received message from Master: op=PointingHead serial=122880 16:51:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:51:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:51:52 Point started: ret=0 16:51:52 point_skyscan result=0 16:51:53 Check angles 16:51:53 SkyScan query 16:51:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 16:51:53 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 16:51:53 Check angles 16:51:53 SkyScan query 16:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:51:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:51:54 Message to Master queued w/err=0: serial=122880 error=0 16:51:59 Received message from Master: op=Filter serial=122881 16:51:59 Color wheel filter change from 0 to 0 16:51:59 FLIGetFilterPos err=0 currentPosition=0 16:51:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:59 Filter is already there-color wheel unchanged 16:51:59 Received message from Master: op=Shutter serial=122882 16:51:59 Shutter LASER open 16:51:59 Received message from Camera: op=State serial=122884 16:51:59 GetSingleValue result=40 Value=cccccccc 16:51:59 SkyScan query 16:52:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:52:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:00 Parameters OK 16:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:00 Set A/D data flow result=40 16:52:00 Set A/D channel type result=40 16:52:00 Set A/D encoding result=40 16:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:00 Set channel filter=0.000000e+000 result=40 16:52:00 Config A/D Result=40 16:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:00 Get A/D filter: -9.255963e+061 result=40 16:52:00 Get A/D value=-858993460 result=40 16:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:00 Parameters OK 16:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:00 Set A/D data flow result=40 16:52:00 Set A/D channel type result=40 16:52:00 Set A/D encoding result=40 16:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:00 Set channel filter=0.000000e+000 result=40 16:52:00 Config A/D Result=40 16:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:00 Get A/D filter: -9.255963e+061 result=40 16:52:00 Get A/D value=-858993460 result=40 16:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:52:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:52:00 Aux= 16:52:00 Message to Camera, serial 122884 queued 16:52:07 Received message from Master: op=Shutter serial=122893 16:52:07 Shutter LASER close 16:52:08 Received message from Master: op=PointingHead serial=122897 16:52:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:52:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:52:08 Point started: ret=0 16:52:08 point_skyscan result=0 16:52:09 Check angles 16:52:09 SkyScan query 16:52:10 SkyScan query done: ret=0 az=136.275<-9085 ze=-142.725<-21515 Statuses=0009 0009 16:52:10 Msec=0 True Az=136.275 Ze=-142.725 Az status=0009 Ze status=0009 16:52:10 Check angles 16:52:10 SkyScan query 16:52:10 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.205<-20147 Statuses=0009 0009 16:52:10 Msec=750 True Az=153.525 Ze=-122.205 Az status=0009 Ze status=0009 16:52:11 Check angles 16:52:11 SkyScan query 16:52:11 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.31<-18754 Statuses=0009 0009 16:52:11 Msec=1500 True Az=171.015 Ze=-101.31 Az status=0009 Ze status=0009 16:52:11 Check angles 16:52:11 SkyScan query 16:52:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 16:52:12 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 16:52:12 Check angles 16:52:12 SkyScan query 16:52:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.89<-15926 Statuses=0008 0009 16:52:13 Msec=3000 True Az=176.01 Ze=-58.89 Az status=0008 Ze status=0009 16:52:13 Check angles 16:52:13 SkyScan query 16:52:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:52:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:52:13 Message to Master queued w/err=0: serial=122897 error=0 16:52:18 Received message from Master: op=Filter serial=122898 16:52:18 Color wheel filter change from 0 to 0 16:52:18 FLIGetFilterPos err=0 currentPosition=0 16:52:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:52:18 Filter is already there-color wheel unchanged 16:52:19 Received message from Master: op=Shutter serial=122899 16:52:19 Shutter LASER close 16:52:19 Received message from Camera: op=State serial=122901 16:52:19 GetSingleValue result=40 Value=cccccccc 16:52:19 SkyScan query 16:52:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:52:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:19 Parameters OK 16:52:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:19 Set A/D data flow result=40 16:52:19 Set A/D channel type result=40 16:52:19 Set A/D encoding result=40 16:52:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:19 Set channel filter=0.000000e+000 result=40 16:52:19 Config A/D Result=40 16:52:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:19 Get A/D filter: -9.255963e+061 result=40 16:52:19 Get A/D value=-858993460 result=40 16:52:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:19 Parameters OK 16:52:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:19 Set A/D data flow result=40 16:52:19 Set A/D channel type result=40 16:52:19 Set A/D encoding result=40 16:52:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:19 Set channel filter=0.000000e+000 result=40 16:52:19 Config A/D Result=40 16:52:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:19 Get A/D filter: -9.255963e+061 result=40 16:52:19 Get A/D value=-858993460 result=40 16:52:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:52:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:52:19 Aux= 16:52:19 Message to Camera, serial 122901 queued 16:52:56 Received message from Master: op=PointingHead serial=122914 16:52:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:52:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:52:56 Point started: ret=0 16:52:56 point_skyscan result=0 16:52:57 Check angles 16:52:57 SkyScan query 16:52:58 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.66<-13444 Statuses=0009 0009 16:52:58 Msec=0 True Az=152.925 Ze=-21.66 Az status=0009 Ze status=0009 16:52:58 Check angles 16:52:58 SkyScan query 16:52:59 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.675<-12045 Statuses=0009 0009 16:52:59 Msec=750 True Az=135.42 Ze=-0.675 Az status=0009 Ze status=0009 16:52:59 Check angles 16:52:59 SkyScan query 16:52:59 SkyScan query done: ret=0 az=117.84<-7856 ze=20.265<-10649 Statuses=0009 0009 16:52:59 Msec=1500 True Az=117.84 Ze=20.265 Az status=0009 Ze status=0009 16:52:59 Check angles 16:52:59 SkyScan query 16:53:00 SkyScan query done: ret=0 az=100.44<-6696 ze=41.25<-9250 Statuses=0009 0009 16:53:00 Msec=2250 True Az=100.44 Ze=41.25 Az status=0009 Ze status=0009 16:53:00 Check angles 16:53:00 SkyScan query 16:53:01 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 16:53:01 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 16:53:01 Check angles 16:53:01 SkyScan query 16:53:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:53:02 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:53:02 Message to Master queued w/err=0: serial=122914 error=0 16:53:07 Received message from Master: op=Filter serial=122915 16:53:07 Color wheel filter change from 0 to 0 16:53:07 FLIGetFilterPos err=0 currentPosition=0 16:53:07 FLIGetStepsRemaining err=0 RemainingSteps=0 16:53:07 Filter is already there-color wheel unchanged 16:53:07 Received message from Master: op=Shutter serial=122916 16:53:07 Shutter LASER close 16:53:07 Received message from Camera: op=State serial=122918 16:53:07 GetSingleValue result=40 Value=cccccccc 16:53:07 SkyScan query 16:53:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:53:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:07 Parameters OK 16:53:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:07 Set A/D data flow result=40 16:53:07 Set A/D channel type result=40 16:53:07 Set A/D encoding result=40 16:53:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:07 Set channel filter=0.000000e+000 result=40 16:53:07 Config A/D Result=40 16:53:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:07 Get A/D filter: -9.255963e+061 result=40 16:53:07 Get A/D value=-858993460 result=40 16:53:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:07 Parameters OK 16:53:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:07 Set A/D data flow result=40 16:53:07 Set A/D channel type result=40 16:53:07 Set A/D encoding result=40 16:53:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:07 Set channel filter=0.000000e+000 result=40 16:53:07 Config A/D Result=40 16:53:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:07 Get A/D filter: -9.255963e+061 result=40 16:53:07 Get A/D value=-858993460 result=40 16:53:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:07 Aux= 16:53:07 Message to Camera, serial 122918 queued 16:53:44 Received message from Master: op=PointingHead serial=122931 16:53:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:53:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:53:45 Point started: ret=0 16:53:45 point_skyscan result=0 16:53:45 Check angles 16:53:45 SkyScan query 16:53:46 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 16:53:46 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 16:53:46 Check angles 16:53:46 SkyScan query 16:53:47 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 16:53:47 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 16:53:47 Check angles 16:53:47 SkyScan query 16:53:47 SkyScan query done: ret=0 az=143.805<-9587 ze=38.505<-9433 Statuses=0009 0008 16:53:47 Msec=1500 True Az=143.805 Ze=38.505 Az status=0009 Ze status=0008 16:53:48 Check angles 16:53:48 SkyScan query 16:53:48 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 16:53:48 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 16:53:48 Check angles 16:53:48 SkyScan query 16:53:49 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:53:49 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:53:49 Check angles 16:53:49 SkyScan query 16:53:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:53:50 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:53:50 Message to Master queued w/err=0: serial=122931 error=0 16:53:55 Received message from Master: op=Filter serial=122932 16:53:55 Color wheel filter change from 0 to 0 16:53:55 FLIGetFilterPos err=0 currentPosition=0 16:53:55 FLIGetStepsRemaining err=0 RemainingSteps=0 16:53:55 Filter is already there-color wheel unchanged 16:53:55 Received message from Master: op=Shutter serial=122933 16:53:55 Shutter LASER close 16:53:55 Received message from Camera: op=State serial=122935 16:53:55 GetSingleValue result=40 Value=cccccccc 16:53:55 SkyScan query 16:53:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:53:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:55 Parameters OK 16:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:55 Set A/D data flow result=40 16:53:55 Set A/D channel type result=40 16:53:55 Set A/D encoding result=40 16:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:55 Set channel filter=0.000000e+000 result=40 16:53:55 Config A/D Result=40 16:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:55 Get A/D filter: -9.255963e+061 result=40 16:53:55 Get A/D value=-858993460 result=40 16:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:55 Parameters OK 16:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:55 Set A/D data flow result=40 16:53:55 Set A/D channel type result=40 16:53:55 Set A/D encoding result=40 16:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:55 Set channel filter=0.000000e+000 result=40 16:53:55 Config A/D Result=40 16:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:55 Get A/D filter: -9.255963e+061 result=40 16:53:55 Get A/D value=-858993460 result=40 16:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:55 Aux= 16:53:55 Message to Camera, serial 122935 queued 16:54:32 Received message from Master: op=PointingHead serial=122948 16:54:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:54:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:54:33 Point started: ret=0 16:54:33 point_skyscan result=0 16:54:33 Check angles 16:54:33 SkyScan query 16:54:34 SkyScan query done: ret=0 az=152.715<-10181 ze=8.34<-11444 Statuses=0009 0009 16:54:34 Msec=0 True Az=152.715 Ze=8.34 Az status=0009 Ze status=0009 16:54:34 Check angles 16:54:34 SkyScan query 16:54:35 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.585<-12839 Statuses=0009 0009 16:54:35 Msec=750 True Az=135.135 Ze=-12.585 Az status=0009 Ze status=0009 16:54:35 Check angles 16:54:35 SkyScan query 16:54:35 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.57<-14238 Statuses=0009 0009 16:54:35 Msec=1500 True Az=117.585 Ze=-33.57 Az status=0009 Ze status=0009 16:54:36 Check angles 16:54:36 SkyScan query 16:54:36 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.555<-15437 Statuses=0009 0009 16:54:36 Msec=2250 True Az=100.32 Ze=-51.555 Az status=0009 Ze status=0009 16:54:36 Check angles 16:54:36 SkyScan query 16:54:37 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:54:37 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:54:37 Check angles 16:54:37 SkyScan query 16:54:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:54:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:54:38 Message to Master queued w/err=0: serial=122948 error=0 16:54:43 Received message from Master: op=Filter serial=122949 16:54:43 Color wheel filter change from 0 to 0 16:54:43 FLIGetFilterPos err=0 currentPosition=0 16:54:43 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:43 Filter is already there-color wheel unchanged 16:54:43 Received message from Master: op=Shutter serial=122950 16:54:43 Shutter LASER close 16:54:43 Received message from Camera: op=State serial=122952 16:54:43 GetSingleValue result=40 Value=cccccccc 16:54:43 SkyScan query 16:54:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:54:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:43 Parameters OK 16:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:43 Set A/D data flow result=40 16:54:43 Set A/D channel type result=40 16:54:43 Set A/D encoding result=40 16:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:43 Set channel filter=0.000000e+000 result=40 16:54:43 Config A/D Result=40 16:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:43 Get A/D filter: -9.255963e+061 result=40 16:54:43 Get A/D value=-858993460 result=40 16:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:43 Parameters OK 16:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:43 Set A/D data flow result=40 16:54:43 Set A/D channel type result=40 16:54:43 Set A/D encoding result=40 16:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:43 Set channel filter=0.000000e+000 result=40 16:54:43 Config A/D Result=40 16:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:43 Get A/D filter: -9.255963e+061 result=40 16:54:43 Get A/D value=-858993460 result=40 16:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:54:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:54:43 Aux= 16:54:43 Message to Camera, serial 122952 queued 16:55:20 Received message from Master: op=PointingHead serial=122965 16:55:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:55:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:55:21 Point started: ret=0 16:55:21 point_skyscan result=0 16:55:21 Check angles 16:55:21 SkyScan query 16:55:22 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.255<-17417 Statuses=0009 0009 16:55:22 Msec=0 True Az=108.945 Ze=-81.255 Az status=0009 Ze status=0009 16:55:22 Check angles 16:55:22 SkyScan query 16:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 16:55:23 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 16:55:23 Check angles 16:55:23 SkyScan query 16:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 16:55:24 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 16:55:24 Check angles 16:55:24 SkyScan query 16:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.12<-21608 Statuses=0008 0009 16:55:24 Msec=2250 True Az=112.995 Ze=-144.12 Az status=0008 Ze status=0009 16:55:24 Check angles 16:55:24 SkyScan query 16:55:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 16:55:25 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 16:55:25 Check angles 16:55:25 SkyScan query 16:55:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:55:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:55:26 Message to Master queued w/err=0: serial=122965 error=0 16:55:31 Received message from Master: op=Filter serial=122966 16:55:31 Color wheel filter change from 0 to 0 16:55:31 FLIGetFilterPos err=0 currentPosition=0 16:55:31 FLIGetStepsRemaining err=0 RemainingSteps=0 16:55:31 Filter is already there-color wheel unchanged 16:55:31 Received message from Master: op=Shutter serial=122967 16:55:31 Shutter LASER open 16:55:31 Received message from Camera: op=State serial=122969 16:55:31 GetSingleValue result=40 Value=cccccccc 16:55:31 SkyScan query 16:55:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:55:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:32 Parameters OK 16:55:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:32 Set A/D data flow result=40 16:55:32 Set A/D channel type result=40 16:55:32 Set A/D encoding result=40 16:55:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:32 Set channel filter=0.000000e+000 result=40 16:55:32 Config A/D Result=40 16:55:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:32 Get A/D filter: -9.255963e+061 result=40 16:55:32 Get A/D value=-858993460 result=40 16:55:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:32 Parameters OK 16:55:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:32 Set A/D data flow result=40 16:55:32 Set A/D channel type result=40 16:55:32 Set A/D encoding result=40 16:55:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:32 Set channel filter=0.000000e+000 result=40 16:55:32 Config A/D Result=40 16:55:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:32 Get A/D filter: -9.255963e+061 result=40 16:55:32 Get A/D value=-858993460 result=40 16:55:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:32 Aux= 16:55:32 Message to Camera, serial 122969 queued 16:55:40 Received message from Master: op=Shutter serial=122979 16:55:40 Shutter LASER close 16:55:41 Received message from Master: op=PointingHead serial=122983 16:55:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:55:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:55:41 Point started: ret=0 16:55:41 point_skyscan result=0 16:55:42 Check angles 16:55:42 SkyScan query 16:55:42 SkyScan query done: ret=0 az=89.805<-5987 ze=157.08<-1528 Statuses=0009 0009 16:55:42 Msec=0 True Az=89.805 Ze=157.08 Az status=0009 Ze status=0009 16:55:42 Check angles 16:55:42 SkyScan query 16:55:43 SkyScan query done: ret=0 az=71.925<-4795 ze=135.69<-2954 Statuses=0009 0009 16:55:43 Msec=750 True Az=71.925 Ze=135.69 Az status=0009 Ze status=0009 16:55:43 Check angles 16:55:43 SkyScan query 16:55:44 SkyScan query done: ret=0 az=54.66<-3644 ze=114.72<-4352 Statuses=0009 0009 16:55:44 Msec=1500 True Az=54.66 Ze=114.72 Az status=0009 Ze status=0009 [UTC 2018-12-13 16:55:44] 16:55:44 Check angles 16:55:44 SkyScan query 16:55:45 SkyScan query done: ret=0 az=40.95<-2730 ze=92.04<-5864 Statuses=0009 0009 16:55:45 Msec=2250 True Az=40.95 Ze=92.04 Az status=0009 Ze status=0009 16:55:45 Check angles 16:55:45 SkyScan query 16:55:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.795<-7147 Statuses=0008 0009 16:55:45 Msec=3000 True Az=40.995 Ze=72.795 Az status=0008 Ze status=0009 16:55:45 Check angles 16:55:45 SkyScan query 16:55:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 16:55:46 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 16:55:46 Check angles 16:55:46 SkyScan query 16:55:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:55:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:55:47 Message to Master queued w/err=0: serial=122983 error=0 16:55:52 Received message from Master: op=Filter serial=122984 16:55:52 Color wheel filter change from 0 to 0 16:55:52 FLIGetFilterPos err=0 currentPosition=0 16:55:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:55:52 Filter is already there-color wheel unchanged 16:55:52 Received message from Master: op=Shutter serial=122985 16:55:52 Shutter LASER close 16:55:52 Received message from Camera: op=State serial=122987 16:55:52 GetSingleValue result=40 Value=cccccccc 16:55:52 SkyScan query 16:55:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:55:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:53 Parameters OK 16:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:53 Set A/D data flow result=40 16:55:53 Set A/D channel type result=40 16:55:53 Set A/D encoding result=40 16:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:53 Set channel filter=0.000000e+000 result=40 16:55:53 Config A/D Result=40 16:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:53 Get A/D filter: -9.255963e+061 result=40 16:55:53 Get A/D value=-858993460 result=40 16:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:53 Parameters OK 16:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:53 Set A/D data flow result=40 16:55:53 Set A/D channel type result=40 16:55:53 Set A/D encoding result=40 16:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:53 Set channel filter=0.000000e+000 result=40 16:55:53 Config A/D Result=40 16:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:53 Get A/D filter: -9.255963e+061 result=40 16:55:53 Get A/D value=-858993460 result=40 16:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:53 Aux= 16:55:53 Message to Camera, serial 122987 queued [UTC 2018-12-13 16:55:53] 16:56:30 Received message from Master: op=PointingHead serial=123000 16:56:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:56:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:56:30 Point started: ret=0 16:56:30 point_skyscan result=0 16:56:31 Check angles 16:56:31 SkyScan query 16:56:31 SkyScan query done: ret=0 az=64.29<-4286 ze=66.555<-7563 Statuses=0009 0008 16:56:31 Msec=0 True Az=64.29 Ze=66.555 Az status=0009 Ze status=0008 16:56:31 Check angles 16:56:31 SkyScan query 16:56:32 SkyScan query done: ret=0 az=81.69<-5446 ze=66.51<-7566 Statuses=0009 0008 16:56:32 Msec=750 True Az=81.69 Ze=66.51 Az status=0009 Ze status=0008 16:56:32 Check angles 16:56:32 SkyScan query 16:56:33 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 16:56:33 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 16:56:33 Check angles 16:56:33 SkyScan query 16:56:33 SkyScan query done: ret=0 az=116.88<-7792 ze=66.495<-7567 Statuses=0009 0008 16:56:33 Msec=2250 True Az=116.88 Ze=66.495 Az status=0009 Ze status=0008 16:56:34 Check angles 16:56:34 SkyScan query 16:56:34 SkyScan query done: ret=0 az=134.205<-8947 ze=66.495<-7567 Statuses=0009 0008 16:56:34 Msec=3000 True Az=134.205 Ze=66.495 Az status=0009 Ze status=0008 16:56:34 Check angles 16:56:34 SkyScan query 16:56:35 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 16:56:35 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 16:56:35 Check angles 16:56:35 SkyScan query 16:56:36 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:56:36 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:56:36 Message to Master queued w/err=0: serial=123000 error=0 16:56:41 Received message from Master: op=Filter serial=123001 16:56:41 Color wheel filter change from 0 to 0 16:56:41 FLIGetFilterPos err=0 currentPosition=0 16:56:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:56:41 Filter is already there-color wheel unchanged 16:56:41 Received message from Master: op=Shutter serial=123002 16:56:41 Shutter LASER close 16:56:41 Received message from Camera: op=State serial=123004 16:56:41 GetSingleValue result=40 Value=cccccccc 16:56:41 SkyScan query 16:56:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:56:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:42 Parameters OK 16:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:42 Set A/D data flow result=40 16:56:42 Set A/D channel type result=40 16:56:42 Set A/D encoding result=40 16:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:42 Set channel filter=0.000000e+000 result=40 16:56:42 Config A/D Result=40 16:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:42 Get A/D filter: -9.255963e+061 result=40 16:56:42 Get A/D value=-858993460 result=40 16:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:42 Parameters OK 16:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:42 Set A/D data flow result=40 16:56:42 Set A/D channel type result=40 16:56:42 Set A/D encoding result=40 16:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:42 Set channel filter=0.000000e+000 result=40 16:56:42 Config A/D Result=40 16:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:42 Get A/D filter: -9.255963e+061 result=40 16:56:42 Get A/D value=-858993460 result=40 16:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:56:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:56:42 Aux= 16:56:42 Message to Camera, serial 123004 queued 16:57:18 Received message from Master: op=PointingHead serial=123017 16:57:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:57:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:57:19 Point started: ret=0 16:57:19 point_skyscan result=0 16:57:19 Check angles 16:57:19 SkyScan query 16:57:20 SkyScan query done: ret=0 az=134.82<-8988 ze=36.54<-9564 Statuses=0009 0009 16:57:20 Msec=0 True Az=134.82 Ze=36.54 Az status=0009 Ze status=0009 16:57:20 Check angles 16:57:20 SkyScan query 16:57:21 SkyScan query done: ret=0 az=116.985<-7799 ze=15.135<-10991 Statuses=0009 0009 16:57:21 Msec=750 True Az=116.985 Ze=15.135 Az status=0009 Ze status=0009 16:57:21 Check angles 16:57:21 SkyScan query 16:57:22 SkyScan query done: ret=0 az=99.615<-6641 ze=-5.85<-12390 Statuses=0009 0009 16:57:22 Msec=1500 True Az=99.615 Ze=-5.85 Az status=0009 Ze status=0009 16:57:22 Check angles 16:57:22 SkyScan query 16:57:22 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.79<-13786 Statuses=0009 0009 16:57:22 Msec=2250 True Az=82.08 Ze=-26.79 Az status=0009 Ze status=0009 16:57:23 Check angles 16:57:23 SkyScan query 16:57:23 SkyScan query done: ret=0 az=64.2<-4280 ze=-38.565<-14571 Statuses=0009 0008 16:57:23 Msec=3000 True Az=64.2 Ze=-38.565 Az status=0009 Ze status=0008 16:57:23 Check angles 16:57:23 SkyScan query 16:57:24 SkyScan query done: ret=0 az=46.425<-3095 ze=-38.52<-14568 Statuses=0009 0008 16:57:24 Msec=3750 True Az=46.425 Ze=-38.52 Az status=0009 Ze status=0008 16:57:24 Check angles 16:57:24 SkyScan query 16:57:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:57:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:57:25 Message to Master queued w/err=0: serial=123017 error=0 16:57:30 Received message from Master: op=Filter serial=123018 16:57:30 Color wheel filter change from 0 to 0 16:57:30 FLIGetFilterPos err=0 currentPosition=0 16:57:30 FLIGetStepsRemaining err=0 RemainingSteps=0 16:57:30 Filter is already there-color wheel unchanged 16:57:30 Received message from Master: op=Shutter serial=123019 16:57:30 Shutter LASER close 16:57:30 Received message from Camera: op=State serial=123021 16:57:30 GetSingleValue result=40 Value=cccccccc 16:57:30 SkyScan query 16:57:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:57:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:30 Parameters OK 16:57:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:30 Set A/D data flow result=40 16:57:30 Set A/D channel type result=40 16:57:30 Set A/D encoding result=40 16:57:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:30 Set channel filter=0.000000e+000 result=40 16:57:30 Config A/D Result=40 16:57:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:30 Get A/D filter: -9.255963e+061 result=40 16:57:30 Get A/D value=-858993460 result=40 16:57:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:30 Parameters OK 16:57:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:30 Set A/D data flow result=40 16:57:30 Set A/D channel type result=40 16:57:30 Set A/D encoding result=40 16:57:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:30 Set channel filter=0.000000e+000 result=40 16:57:30 Config A/D Result=40 16:57:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:30 Get A/D filter: -9.255963e+061 result=40 16:57:30 Get A/D value=-858993460 result=40 16:57:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:57:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:57:30 Aux= 16:57:30 Message to Camera, serial 123021 queued 16:58:07 Received message from Master: op=PointingHead serial=123034 16:58:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:58:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:58:08 Point started: ret=0 16:58:08 point_skyscan result=0 16:58:08 Check angles 16:58:08 SkyScan query 16:58:09 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.835<-16589 Statuses=0009 0009 16:58:09 Msec=0 True Az=64.425 Ze=-68.835 Az status=0009 Ze status=0009 16:58:09 Check angles 16:58:09 SkyScan query 16:58:10 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.79<-17986 Statuses=0009 0009 16:58:10 Msec=750 True Az=81.885 Ze=-89.79 Az status=0009 Ze status=0009 16:58:10 Check angles 16:58:10 SkyScan query 16:58:10 SkyScan query done: ret=0 az=99.795<-6653 ze=-111.165<-19411 Statuses=0009 0009 16:58:10 Msec=1500 True Az=99.795 Ze=-111.165 Az status=0009 Ze status=0009 16:58:11 Check angles 16:58:11 SkyScan query 16:58:11 SkyScan query done: ret=0 az=117.66<-7844 ze=-132.51<-20834 Statuses=0009 0009 16:58:11 Msec=2250 True Az=117.66 Ze=-132.51 Az status=0009 Ze status=0009 16:58:11 Check angles 16:58:11 SkyScan query 16:58:12 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 16:58:12 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 16:58:12 Check angles 16:58:12 SkyScan query 16:58:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:58:13 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:58:13 Message to Master queued w/err=0: serial=123034 error=0 16:58:18 Received message from Master: op=Filter serial=123035 16:58:18 Color wheel filter change from 0 to 0 16:58:18 FLIGetFilterPos err=0 currentPosition=0 16:58:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:58:18 Filter is already there-color wheel unchanged 16:58:18 Received message from Master: op=Shutter serial=123036 16:58:18 Shutter LASER close 16:58:18 Received message from Camera: op=State serial=123038 16:58:18 GetSingleValue result=40 Value=cccccccc 16:58:18 SkyScan query 16:58:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:58:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:19 Parameters OK 16:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:19 Set A/D data flow result=40 16:58:19 Set A/D channel type result=40 16:58:19 Set A/D encoding result=40 16:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:19 Set channel filter=0.000000e+000 result=40 16:58:19 Config A/D Result=40 16:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:19 Get A/D filter: -9.255963e+061 result=40 16:58:19 Get A/D value=-858993460 result=40 16:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:19 Parameters OK 16:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:19 Set A/D data flow result=40 16:58:19 Set A/D channel type result=40 16:58:19 Set A/D encoding result=40 16:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:19 Set channel filter=0.000000e+000 result=40 16:58:19 Config A/D Result=40 16:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:19 Get A/D filter: -9.255963e+061 result=40 16:58:19 Get A/D value=-858993460 result=40 16:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:58:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:58:19 Aux= 16:58:19 Message to Camera, serial 123038 queued 16:58:55 Received message from Master: op=PointingHead serial=123051 16:58:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:58:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:58:56 Point started: ret=0 16:58:56 point_skyscan result=0 16:58:56 Check angles 16:58:56 SkyScan query 16:58:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.51<-23434 Statuses=0009 0009 16:58:57 Msec=0 True Az=113.01 Ze=-171.51 Az status=0009 Ze status=0009 16:58:57 Check angles 16:58:57 SkyScan query 16:58:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:58:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:58:58 Message to Master queued w/err=0: serial=123051 error=0 16:59:03 Received message from Master: op=Filter serial=123052 16:59:03 Color wheel filter change from 0 to 0 16:59:03 FLIGetFilterPos err=0 currentPosition=0 16:59:03 FLIGetStepsRemaining err=0 RemainingSteps=0 16:59:03 Filter is already there-color wheel unchanged 16:59:03 Received message from Master: op=Shutter serial=123053 16:59:03 Shutter LASER open 16:59:03 Received message from Camera: op=State serial=123055 16:59:03 GetSingleValue result=40 Value=cccccccc 16:59:03 SkyScan query 16:59:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:59:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:04 Parameters OK 16:59:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:04 Set A/D data flow result=40 16:59:04 Set A/D channel type result=40 16:59:04 Set A/D encoding result=40 16:59:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:04 Set channel filter=0.000000e+000 result=40 16:59:04 Config A/D Result=40 16:59:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:04 Get A/D filter: -9.255963e+061 result=40 16:59:04 Get A/D value=-858993460 result=40 16:59:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:04 Parameters OK 16:59:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:04 Set A/D data flow result=40 16:59:04 Set A/D channel type result=40 16:59:04 Set A/D encoding result=40 16:59:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:04 Set channel filter=0.000000e+000 result=40 16:59:04 Config A/D Result=40 16:59:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:04 Get A/D filter: -9.255963e+061 result=40 16:59:04 Get A/D value=-858993460 result=40 16:59:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:59:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:59:04 Aux= 16:59:04 Message to Camera, serial 123055 queued 16:59:12 Received message from Master: op=Shutter serial=123065 16:59:12 Shutter LASER close 16:59:13 Received message from Master: op=PointingHead serial=123069 16:59:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:59:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:59:13 Point started: ret=0 16:59:13 point_skyscan result=0 16:59:14 Check angles 16:59:14 SkyScan query 16:59:14 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.415<-21561 Statuses=0009 0009 16:59:14 Msec=0 True Az=135.825 Ze=-143.415 Az status=0009 Ze status=0009 16:59:15 Check angles 16:59:15 SkyScan query 16:59:15 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.98<-20132 Statuses=0009 0009 16:59:15 Msec=750 True Az=153.75 Ze=-121.98 Az status=0009 Ze status=0009 16:59:15 Check angles 16:59:15 SkyScan query 16:59:16 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.07<-18738 Statuses=0009 0009 16:59:16 Msec=1500 True Az=171.225 Ze=-101.07 Az status=0009 Ze status=0009 16:59:16 Check angles 16:59:16 SkyScan query 16:59:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.13<-17342 Statuses=0008 0009 16:59:17 Msec=2250 True Az=176.01 Ze=-80.13 Az status=0008 Ze status=0009 16:59:17 Check angles 16:59:17 SkyScan query 16:59:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 16:59:17 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 16:59:18 Check angles 16:59:18 SkyScan query 16:59:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 16:59:18 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 16:59:18 Message to Master queued w/err=0: serial=123069 error=0 16:59:23 Received message from Master: op=Filter serial=123070 16:59:23 Color wheel filter change from 0 to 0 16:59:23 FLIGetFilterPos err=0 currentPosition=0 16:59:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:59:23 Filter is already there-color wheel unchanged 16:59:23 Received message from Master: op=Shutter serial=123071 16:59:23 Shutter LASER close 16:59:24 Received message from Camera: op=State serial=123073 16:59:24 GetSingleValue result=40 Value=cccccccc 16:59:24 SkyScan query 16:59:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:59:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:24 Parameters OK 16:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:24 Set A/D data flow result=40 16:59:24 Set A/D channel type result=40 16:59:24 Set A/D encoding result=40 16:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:24 Set channel filter=0.000000e+000 result=40 16:59:24 Config A/D Result=40 16:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:24 Get A/D filter: -9.255963e+061 result=40 16:59:24 Get A/D value=-858993460 result=40 16:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:24 Parameters OK 16:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:24 Set A/D data flow result=40 16:59:24 Set A/D channel type result=40 16:59:24 Set A/D encoding result=40 16:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:24 Set channel filter=0.000000e+000 result=40 16:59:24 Config A/D Result=40 16:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:24 Get A/D filter: -9.255963e+061 result=40 16:59:24 Get A/D value=-858993460 result=40 16:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:59:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:59:24 Aux= 16:59:24 Message to Camera, serial 123073 queued 17:00:01 Received message from Master: op=PointingHead serial=123086 17:00:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:00:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:00:01 Point started: ret=0 17:00:01 point_skyscan result=0 17:00:02 Check angles 17:00:02 SkyScan query 17:00:03 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.42<-13428 Statuses=0009 0009 17:00:03 Msec=0 True Az=152.655 Ze=-21.42 Az status=0009 Ze status=0009 17:00:03 Check angles 17:00:03 SkyScan query 17:00:03 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.435<-12029 Statuses=0009 0009 17:00:03 Msec=750 True Az=135.12 Ze=-0.435 Az status=0009 Ze status=0009 17:00:04 Check angles 17:00:04 SkyScan query 17:00:04 SkyScan query done: ret=0 az=117.285<-7819 ze=20.955<-10603 Statuses=0009 0009 17:00:04 Msec=1500 True Az=117.285 Ze=20.955 Az status=0009 Ze status=0009 17:00:04 Check angles 17:00:04 SkyScan query 17:00:05 SkyScan query done: ret=0 az=99.75<-6650 ze=41.88<-9208 Statuses=0009 0009 17:00:05 Msec=2250 True Az=99.75 Ze=41.88 Az status=0009 Ze status=0009 17:00:05 Check angles 17:00:05 SkyScan query 17:00:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 17:00:06 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 17:00:06 Check angles 17:00:06 SkyScan query 17:00:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:00:06 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:00:06 Message to Master queued w/err=0: serial=123086 error=0 17:00:11 Received message from Master: op=Filter serial=123087 17:00:11 Color wheel filter change from 0 to 0 17:00:11 FLIGetFilterPos err=0 currentPosition=0 17:00:11 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:11 Filter is already there-color wheel unchanged 17:00:12 Received message from Master: op=Shutter serial=123088 17:00:12 Shutter LASER close 17:00:12 Received message from Camera: op=State serial=123090 17:00:12 GetSingleValue result=40 Value=cccccccc 17:00:12 SkyScan query 17:00:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:00:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:12 Parameters OK 17:00:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:12 Set A/D data flow result=40 17:00:12 Set A/D channel type result=40 17:00:12 Set A/D encoding result=40 17:00:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:12 Set channel filter=0.000000e+000 result=40 17:00:12 Config A/D Result=40 17:00:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:12 Get A/D filter: -9.255963e+061 result=40 17:00:12 Get A/D value=-858993460 result=40 17:00:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:12 Parameters OK 17:00:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:12 Set A/D data flow result=40 17:00:12 Set A/D channel type result=40 17:00:12 Set A/D encoding result=40 17:00:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:12 Set channel filter=0.000000e+000 result=40 17:00:12 Config A/D Result=40 17:00:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:12 Get A/D filter: -9.255963e+061 result=40 17:00:12 Get A/D value=-858993460 result=40 17:00:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:12 Aux= 17:00:12 Message to Camera, serial 123090 queued 17:00:49 Received message from Master: op=PointingHead serial=123103 17:00:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:00:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:00:49 Point started: ret=0 17:00:49 point_skyscan result=0 17:00:50 Check angles 17:00:50 SkyScan query 17:00:51 SkyScan query done: ret=0 az=109.44<-7296 ze=38.49<-9434 Statuses=0009 0008 17:00:51 Msec=0 True Az=109.44 Ze=38.49 Az status=0009 Ze status=0008 17:00:51 Check angles 17:00:51 SkyScan query 17:00:52 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 17:00:52 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 17:00:52 Check angles 17:00:52 SkyScan query 17:00:52 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 17:00:52 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 17:00:52 Check angles 17:00:52 SkyScan query 17:00:53 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 17:00:53 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 17:00:53 Check angles 17:00:53 SkyScan query 17:00:54 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:00:54 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:00:54 Check angles 17:00:54 SkyScan query 17:00:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:00:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:00:55 Message to Master queued w/err=0: serial=123103 error=0 17:01:00 Received message from Master: op=Filter serial=123104 17:01:00 Color wheel filter change from 0 to 0 17:01:00 FLIGetFilterPos err=0 currentPosition=0 17:01:00 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:00 Filter is already there-color wheel unchanged 17:01:00 Received message from Master: op=Shutter serial=123105 17:01:00 Shutter LASER close 17:01:00 Received message from Camera: op=State serial=123107 17:01:00 GetSingleValue result=40 Value=cccccccc 17:01:00 SkyScan query 17:01:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:01:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:00 Parameters OK 17:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:00 Set A/D data flow result=40 17:01:00 Set A/D channel type result=40 17:01:00 Set A/D encoding result=40 17:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:00 Set channel filter=0.000000e+000 result=40 17:01:00 Config A/D Result=40 17:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:00 Get A/D filter: -9.255963e+061 result=40 17:01:00 Get A/D value=-858993460 result=40 17:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:00 Parameters OK 17:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:00 Set A/D data flow result=40 17:01:00 Set A/D channel type result=40 17:01:00 Set A/D encoding result=40 17:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:00 Set channel filter=0.000000e+000 result=40 17:01:00 Config A/D Result=40 17:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:00 Get A/D filter: -9.255963e+061 result=40 17:01:00 Get A/D value=-858993460 result=40 17:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:01:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:01:00 Aux= 17:01:00 Message to Camera, serial 123107 queued 17:01:37 Received message from Master: op=PointingHead serial=123120 17:01:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:01:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:01:38 Point started: ret=0 17:01:38 point_skyscan result=0 17:01:38 Check angles 17:01:38 SkyScan query 17:01:39 SkyScan query done: ret=0 az=152.97<-10198 ze=8.73<-11418 Statuses=0009 0009 17:01:39 Msec=0 True Az=152.97 Ze=8.73 Az status=0009 Ze status=0009 17:01:39 Check angles 17:01:39 SkyScan query 17:01:40 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.27<-12818 Statuses=0009 0009 17:01:40 Msec=750 True Az=135.42 Ze=-12.27 Az status=0009 Ze status=0009 17:01:40 Check angles 17:01:40 SkyScan query 17:01:40 SkyScan query done: ret=0 az=117.975<-7865 ze=-33.18<-14212 Statuses=0009 0009 17:01:40 Msec=1500 True Az=117.975 Ze=-33.18 Az status=0009 Ze status=0009 17:01:41 Check angles 17:01:41 SkyScan query 17:01:41 SkyScan query done: ret=0 az=100.56<-6704 ze=-51.525<-15435 Statuses=0009 0009 17:01:41 Msec=2250 True Az=100.56 Ze=-51.525 Az status=0009 Ze status=0009 17:01:41 Check angles 17:01:41 SkyScan query 17:01:42 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:01:42 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:01:42 Check angles 17:01:42 SkyScan query 17:01:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:01:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:01:43 Message to Master queued w/err=0: serial=123120 error=0 17:01:48 Received message from Master: op=Filter serial=123121 17:01:48 Color wheel filter change from 0 to 0 17:01:48 FLIGetFilterPos err=0 currentPosition=0 17:01:48 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:48 Filter is already there-color wheel unchanged 17:01:48 Received message from Master: op=Shutter serial=123122 17:01:48 Shutter LASER close 17:01:48 Received message from Camera: op=State serial=123124 17:01:48 GetSingleValue result=40 Value=cccccccc 17:01:48 SkyScan query 17:01:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:48 Parameters OK 17:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:48 Set A/D data flow result=40 17:01:48 Set A/D channel type result=40 17:01:48 Set A/D encoding result=40 17:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:48 Set channel filter=0.000000e+000 result=40 17:01:48 Config A/D Result=40 17:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:48 Get A/D filter: -9.255963e+061 result=40 17:01:48 Get A/D value=-858993460 result=40 17:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:48 Parameters OK 17:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:48 Set A/D data flow result=40 17:01:48 Set A/D channel type result=40 17:01:48 Set A/D encoding result=40 17:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:48 Set channel filter=0.000000e+000 result=40 17:01:48 Config A/D Result=40 17:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:48 Get A/D filter: -9.255963e+061 result=40 17:01:48 Get A/D value=-858993460 result=40 17:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:01:48 Aux= 17:01:48 Message to Camera, serial 123124 queued 17:02:24 Received message from Master: op=PointingHead serial=123136 17:02:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:02:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:02:25 Point started: ret=0 17:02:25 point_skyscan result=0 17:02:25 Check angles 17:02:25 SkyScan query 17:02:26 SkyScan query done: ret=0 az=108.735<-7249 ze=-81.045<-17403 Statuses=0009 0009 17:02:26 Msec=0 True Az=108.735 Ze=-81.045 Az status=0009 Ze status=0009 17:02:26 Check angles 17:02:26 SkyScan query 17:02:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 17:02:27 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 17:02:27 Check angles 17:02:27 SkyScan query 17:02:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 17:02:28 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 17:02:28 Check angles 17:02:28 SkyScan query 17:02:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 17:02:28 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 17:02:28 Check angles 17:02:28 SkyScan query 17:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 17:02:29 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 17:02:29 Check angles 17:02:29 SkyScan query 17:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:02:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:02:30 Message to Master queued w/err=0: serial=123136 error=0 17:02:35 Received message from Master: op=Filter serial=123137 17:02:35 Color wheel filter change from 0 to 0 17:02:35 FLIGetFilterPos err=0 currentPosition=0 17:02:35 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:35 Filter is already there-color wheel unchanged 17:02:35 Received message from Master: op=Shutter serial=123138 17:02:35 Shutter LASER open 17:02:35 Received message from Camera: op=State serial=123140 17:02:35 GetSingleValue result=40 Value=cccccccc 17:02:35 SkyScan query 17:02:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:02:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:36 Parameters OK 17:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:36 Set A/D data flow result=40 17:02:36 Set A/D channel type result=40 17:02:36 Set A/D encoding result=40 17:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:36 Set channel filter=0.000000e+000 result=40 17:02:36 Config A/D Result=40 17:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:36 Get A/D filter: -9.255963e+061 result=40 17:02:36 Get A/D value=-858993460 result=40 17:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:36 Parameters OK 17:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:36 Set A/D data flow result=40 17:02:36 Set A/D channel type result=40 17:02:36 Set A/D encoding result=40 17:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:36 Set channel filter=0.000000e+000 result=40 17:02:36 Config A/D Result=40 17:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:36 Get A/D filter: -9.255963e+061 result=40 17:02:36 Get A/D value=-858993460 result=40 17:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:36 Aux= 17:02:36 Message to Camera, serial 123140 queued 17:02:44 Received message from Master: op=Shutter serial=123150 17:02:44 Shutter LASER close 17:02:45 Received message from Master: op=PointingHead serial=123154 17:02:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:02:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:02:45 Point started: ret=0 17:02:45 point_skyscan result=0 17:02:46 Check angles 17:02:46 SkyScan query 17:02:46 SkyScan query done: ret=0 az=89.52<-5968 ze=156.75<-1550 Statuses=0009 0009 17:02:46 Msec=0 True Az=89.52 Ze=156.75 Az status=0009 Ze status=0009 17:02:46 Check angles 17:02:46 SkyScan query 17:02:47 SkyScan query done: ret=0 az=71.55<-4770 ze=135.36<-2976 Statuses=0009 0009 17:02:47 Msec=750 True Az=71.55 Ze=135.36 Az status=0009 Ze status=0009 17:02:47 Check angles 17:02:47 SkyScan query 17:02:48 SkyScan query done: ret=0 az=54.39<-3626 ze=114.39<-4374 Statuses=0009 0009 17:02:48 Msec=1500 True Az=54.39 Ze=114.39 Az status=0009 Ze status=0009 17:02:48 Check angles 17:02:48 SkyScan query 17:02:48 SkyScan query done: ret=0 az=40.995<-2733 ze=93.465<-5769 Statuses=0009 0009 17:02:48 Msec=2250 True Az=40.995 Ze=93.465 Az status=0009 Ze status=0009 17:02:49 Check angles 17:02:49 SkyScan query 17:02:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.09<-7194 Statuses=0008 0009 17:02:49 Msec=3000 True Az=40.995 Ze=72.09 Az status=0008 Ze status=0009 17:02:49 Check angles 17:02:49 SkyScan query 17:02:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.08<-8528 Statuses=0008 0009 17:02:50 Msec=3750 True Az=40.995 Ze=52.08 Az status=0008 Ze status=0009 17:02:50 Check angles 17:02:50 SkyScan query 17:02:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:02:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:02:51 Message to Master queued w/err=0: serial=123154 error=0 17:02:56 Received message from Master: op=Filter serial=123155 17:02:56 Color wheel filter change from 0 to 0 17:02:56 FLIGetFilterPos err=0 currentPosition=0 17:02:56 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:56 Filter is already there-color wheel unchanged 17:02:56 Received message from Master: op=Shutter serial=123156 17:02:56 Shutter LASER close 17:02:56 Received message from Camera: op=State serial=123158 17:02:56 GetSingleValue result=40 Value=cccccccc 17:02:56 SkyScan query 17:02:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:02:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:57 Parameters OK 17:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:57 Set A/D data flow result=40 17:02:57 Set A/D channel type result=40 17:02:57 Set A/D encoding result=40 17:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:57 Set channel filter=0.000000e+000 result=40 17:02:57 Config A/D Result=40 17:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:57 Get A/D filter: -9.255963e+061 result=40 17:02:57 Get A/D value=-858993460 result=40 17:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:57 Parameters OK 17:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:57 Set A/D data flow result=40 17:02:57 Set A/D channel type result=40 17:02:57 Set A/D encoding result=40 17:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:57 Set channel filter=0.000000e+000 result=40 17:02:57 Config A/D Result=40 17:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:57 Get A/D filter: -9.255963e+061 result=40 17:02:57 Get A/D value=-858993460 result=40 17:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:57 Aux= 17:02:57 Message to Camera, serial 123158 queued 17:03:34 Received message from Master: op=PointingHead serial=123171 17:03:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:03:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:03:34 Point started: ret=0 17:03:34 point_skyscan result=0 17:03:35 Check angles 17:03:35 SkyScan query 17:03:35 SkyScan query done: ret=0 az=64.365<-4291 ze=66.555<-7563 Statuses=0009 0008 17:03:35 Msec=0 True Az=64.365 Ze=66.555 Az status=0009 Ze status=0008 17:03:35 Check angles 17:03:35 SkyScan query 17:03:36 SkyScan query done: ret=0 az=81.915<-5461 ze=66.495<-7567 Statuses=0009 0008 17:03:36 Msec=750 True Az=81.915 Ze=66.495 Az status=0009 Ze status=0008 17:03:36 Check angles 17:03:36 SkyScan query 17:03:37 SkyScan query done: ret=0 az=99.42<-6628 ze=66.495<-7567 Statuses=0009 0008 17:03:37 Msec=1500 True Az=99.42 Ze=66.495 Az status=0009 Ze status=0008 17:03:37 Check angles 17:03:37 SkyScan query 17:03:37 SkyScan query done: ret=0 az=116.805<-7787 ze=66.495<-7567 Statuses=0009 0008 17:03:37 Msec=2250 True Az=116.805 Ze=66.495 Az status=0009 Ze status=0008 17:03:38 Check angles 17:03:38 SkyScan query 17:03:38 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 17:03:38 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 17:03:38 Check angles 17:03:38 SkyScan query 17:03:39 SkyScan query done: ret=0 az=152.07<-10138 ze=66.495<-7567 Statuses=0009 0008 17:03:39 Msec=3750 True Az=152.07 Ze=66.495 Az status=0009 Ze status=0008 17:03:39 Check angles 17:03:39 SkyScan query 17:03:40 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 17:03:40 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 17:03:40 Message to Master queued w/err=0: serial=123171 error=0 17:03:45 Received message from Master: op=Filter serial=123172 17:03:45 Color wheel filter change from 0 to 0 17:03:45 FLIGetFilterPos err=0 currentPosition=0 17:03:45 FLIGetStepsRemaining err=0 RemainingSteps=0 17:03:45 Filter is already there-color wheel unchanged 17:03:45 Received message from Master: op=Shutter serial=123173 17:03:45 Shutter LASER close 17:03:45 Received message from Camera: op=State serial=123175 17:03:45 GetSingleValue result=40 Value=cccccccc 17:03:45 SkyScan query 17:03:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:03:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:46 Parameters OK 17:03:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:46 Set A/D data flow result=40 17:03:46 Set A/D channel type result=40 17:03:46 Set A/D encoding result=40 17:03:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:46 Set channel filter=0.000000e+000 result=40 17:03:46 Config A/D Result=40 17:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:46 Get A/D filter: -9.255963e+061 result=40 17:03:46 Get A/D value=-858993460 result=40 17:03:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:46 Parameters OK 17:03:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:46 Set A/D data flow result=40 17:03:46 Set A/D channel type result=40 17:03:46 Set A/D encoding result=40 17:03:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:46 Set channel filter=0.000000e+000 result=40 17:03:46 Config A/D Result=40 17:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:46 Get A/D filter: -9.255963e+061 result=40 17:03:46 Get A/D value=-858993460 result=40 17:03:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:03:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:03:46 Aux= 17:03:46 Message to Camera, serial 123175 queued 17:04:22 Received message from Master: op=PointingHead serial=123188 17:04:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:04:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:04:23 Point started: ret=0 17:04:23 point_skyscan result=0 17:04:23 Check angles 17:04:23 SkyScan query 17:04:24 SkyScan query done: ret=0 az=135.195<-9013 ze=36.93<-9538 Statuses=0009 0009 17:04:24 Msec=0 True Az=135.195 Ze=36.93 Az status=0009 Ze status=0009 17:04:24 Check angles 17:04:24 SkyScan query 17:04:25 SkyScan query done: ret=0 az=117.72<-7848 ze=15.96<-10936 Statuses=0009 0009 17:04:25 Msec=750 True Az=117.72 Ze=15.96 Az status=0009 Ze status=0009 17:04:25 Check angles 17:04:25 SkyScan query 17:04:26 SkyScan query done: ret=0 az=100.335<-6689 ze=-4.995<-12333 Statuses=0009 0009 17:04:26 Msec=1500 True Az=100.335 Ze=-4.995 Az status=0009 Ze status=0009 17:04:26 Check angles 17:04:26 SkyScan query 17:04:26 SkyScan query done: ret=0 az=82.83<-5522 ze=-25.965<-13731 Statuses=0009 0009 17:04:26 Msec=2250 True Az=82.83 Ze=-25.965 Az status=0009 Ze status=0009 17:04:26 Check angles 17:04:26 SkyScan query 17:04:27 SkyScan query done: ret=0 az=65.325<-4355 ze=-38.565<-14571 Statuses=0009 0008 17:04:27 Msec=3000 True Az=65.325 Ze=-38.565 Az status=0009 Ze status=0008 17:04:27 Check angles 17:04:27 SkyScan query 17:04:28 SkyScan query done: ret=0 az=47.865<-3191 ze=-38.535<-14569 Statuses=0009 0008 17:04:28 Msec=3750 True Az=47.865 Ze=-38.535 Az status=0009 Ze status=0008 17:04:28 Check angles 17:04:28 SkyScan query 17:04:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:04:29 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:04:29 Message to Master queued w/err=0: serial=123188 error=0 17:04:34 Received message from Master: op=Filter serial=123189 17:04:34 Color wheel filter change from 0 to 0 17:04:34 FLIGetFilterPos err=0 currentPosition=0 17:04:34 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:34 Filter is already there-color wheel unchanged 17:04:34 Received message from Master: op=Shutter serial=123190 17:04:34 Shutter LASER close 17:04:34 Received message from Camera: op=State serial=123192 17:04:34 GetSingleValue result=40 Value=cccccccc 17:04:34 SkyScan query 17:04:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:04:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:34 Parameters OK 17:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:34 Set A/D data flow result=40 17:04:34 Set A/D channel type result=40 17:04:34 Set A/D encoding result=40 17:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:34 Set channel filter=0.000000e+000 result=40 17:04:34 Config A/D Result=40 17:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:34 Get A/D filter: -9.255963e+061 result=40 17:04:34 Get A/D value=-858993460 result=40 17:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:34 Parameters OK 17:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:34 Set A/D data flow result=40 17:04:34 Set A/D channel type result=40 17:04:34 Set A/D encoding result=40 17:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:34 Set channel filter=0.000000e+000 result=40 17:04:34 Config A/D Result=40 17:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:34 Get A/D filter: -9.255963e+061 result=40 17:04:34 Get A/D value=-858993460 result=40 17:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:34 Aux= 17:04:34 Message to Camera, serial 123192 queued 17:05:11 Received message from Master: op=PointingHead serial=123205 17:05:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:05:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:05:11 Point started: ret=0 17:05:11 point_skyscan result=0 17:05:12 Check angles 17:05:12 SkyScan query 17:05:13 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.085<-16539 Statuses=0009 0009 17:05:13 Msec=0 True Az=63.825 Ze=-68.085 Az status=0009 Ze status=0009 17:05:13 Check angles 17:05:13 SkyScan query 17:05:14 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.52<-17968 Statuses=0009 0009 17:05:14 Msec=750 True Az=81.585 Ze=-89.52 Az status=0009 Ze status=0009 17:05:14 Check angles 17:05:14 SkyScan query 17:05:14 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.49<-19366 Statuses=0009 0009 17:05:14 Msec=1500 True Az=99.12 Ze=-110.49 Az status=0009 Ze status=0009 17:05:14 Check angles 17:05:14 SkyScan query 17:05:15 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.415<-20761 Statuses=0009 0009 17:05:15 Msec=2250 True Az=116.655 Ze=-131.415 Az status=0009 Ze status=0009 17:05:15 Check angles 17:05:15 SkyScan query 17:05:16 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 17:05:16 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 17:05:16 Check angles 17:05:16 SkyScan query 17:05:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:05:17 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:05:17 Message to Master queued w/err=0: serial=123205 error=0 17:05:22 Received message from Master: op=Filter serial=123206 17:05:22 Color wheel filter change from 0 to 0 17:05:22 FLIGetFilterPos err=0 currentPosition=0 17:05:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:05:22 Filter is already there-color wheel unchanged 17:05:22 Received message from Master: op=Shutter serial=123207 17:05:22 Shutter LASER close 17:05:22 Received message from Camera: op=State serial=123209 17:05:22 GetSingleValue result=40 Value=cccccccc 17:05:22 SkyScan query 17:05:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:05:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:22 Parameters OK 17:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:22 Set A/D data flow result=40 17:05:22 Set A/D channel type result=40 17:05:22 Set A/D encoding result=40 17:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:22 Set channel filter=0.000000e+000 result=40 17:05:22 Config A/D Result=40 17:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:22 Get A/D filter: -9.255963e+061 result=40 17:05:22 Get A/D value=-858993460 result=40 17:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:22 Parameters OK 17:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:22 Set A/D data flow result=40 17:05:22 Set A/D channel type result=40 17:05:22 Set A/D encoding result=40 17:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:22 Set channel filter=0.000000e+000 result=40 17:05:22 Config A/D Result=40 17:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:22 Get A/D filter: -9.255963e+061 result=40 17:05:22 Get A/D value=-858993460 result=40 17:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:05:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:05:22 Aux= 17:05:22 Message to Camera, serial 123209 queued 17:05:59 Received message from Master: op=PointingHead serial=123222 17:05:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:05:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:06:00 Point started: ret=0 17:06:00 point_skyscan result=0 17:06:00 Check angles 17:06:00 SkyScan query 17:06:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.88<-23392 Statuses=0009 0009 17:06:01 Msec=0 True Az=113.01 Ze=-170.88 Az status=0009 Ze status=0009 17:06:01 Check angles 17:06:01 SkyScan query 17:06:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:06:02 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:06:02 Message to Master queued w/err=0: serial=123222 error=0 17:06:07 Received message from Master: op=Filter serial=123223 17:06:07 Color wheel filter change from 0 to 0 17:06:07 FLIGetFilterPos err=0 currentPosition=0 17:06:07 FLIGetStepsRemaining err=0 RemainingSteps=0 17:06:07 Filter is already there-color wheel unchanged 17:06:07 Received message from Master: op=Shutter serial=123224 17:06:07 Shutter LASER open 17:06:07 Received message from Camera: op=State serial=123226 17:06:07 GetSingleValue result=40 Value=cccccccc 17:06:07 SkyScan query 17:06:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:06:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:08 Parameters OK 17:06:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:08 Set A/D data flow result=40 17:06:08 Set A/D channel type result=40 17:06:08 Set A/D encoding result=40 17:06:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:08 Set channel filter=0.000000e+000 result=40 17:06:08 Config A/D Result=40 17:06:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:08 Get A/D filter: -9.255963e+061 result=40 17:06:08 Get A/D value=-858993460 result=40 17:06:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:08 Parameters OK 17:06:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:08 Set A/D data flow result=40 17:06:08 Set A/D channel type result=40 17:06:08 Set A/D encoding result=40 17:06:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:08 Set channel filter=0.000000e+000 result=40 17:06:08 Config A/D Result=40 17:06:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:08 Get A/D filter: -9.255963e+061 result=40 17:06:08 Get A/D value=-858993460 result=40 17:06:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:06:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:06:08 Aux= 17:06:08 Message to Camera, serial 123226 queued 17:06:15 Received message from Master: op=Shutter serial=123235 17:06:15 Shutter LASER close 17:06:16 Received message from Master: op=PointingHead serial=123239 17:06:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:06:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:06:16 Point started: ret=0 17:06:16 point_skyscan result=0 17:06:17 Check angles 17:06:17 SkyScan query 17:06:17 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.92<-21528 Statuses=0009 0009 17:06:17 Msec=0 True Az=136.23 Ze=-142.92 Az status=0009 Ze status=0009 17:06:17 Check angles 17:06:17 SkyScan query [UTC 2018-12-13 17:06:18] 17:06:18 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.965<-20131 Statuses=0009 0009 17:06:18 Msec=750 True Az=153.75 Ze=-121.965 Az status=0009 Ze status=0009 17:06:18 Check angles 17:06:18 SkyScan query 17:06:19 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.025<-18735 Statuses=0009 0009 17:06:19 Msec=1500 True Az=171.225 Ze=-101.025 Az status=0009 Ze status=0009 17:06:19 Check angles 17:06:19 SkyScan query 17:06:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.62<-17308 Statuses=0008 0009 17:06:20 Msec=2250 True Az=176.01 Ze=-79.62 Az status=0008 Ze status=0009 17:06:20 Check angles 17:06:20 SkyScan query 17:06:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 17:06:20 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 17:06:20 Check angles 17:06:20 SkyScan query 17:06:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:06:21 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:06:21 Message to Master queued w/err=0: serial=123239 error=0 17:06:26 Received message from Master: op=Filter serial=123240 17:06:26 Color wheel filter change from 0 to 0 17:06:26 FLIGetFilterPos err=0 currentPosition=0 17:06:26 FLIGetStepsRemaining err=0 RemainingSteps=0 17:06:26 Filter is already there-color wheel unchanged 17:06:26 Received message from Master: op=Shutter serial=123241 17:06:26 Shutter LASER close 17:06:26 Received message from Camera: op=State serial=123243 17:06:26 GetSingleValue result=40 Value=cccccccc 17:06:26 SkyScan query 17:06:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:06:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:27 Parameters OK 17:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:27 Set A/D data flow result=40 17:06:27 Set A/D channel type result=40 17:06:27 Set A/D encoding result=40 17:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:27 Set channel filter=0.000000e+000 result=40 17:06:27 Config A/D Result=40 17:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:27 Get A/D filter: -9.255963e+061 result=40 17:06:27 Get A/D value=-858993460 result=40 17:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:27 Parameters OK 17:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:27 Set A/D data flow result=40 17:06:27 Set A/D channel type result=40 17:06:27 Set A/D encoding result=40 17:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:27 Set channel filter=0.000000e+000 result=40 17:06:27 Config A/D Result=40 17:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:27 Get A/D filter: -9.255963e+061 result=40 17:06:27 Get A/D value=-858993460 result=40 17:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:06:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:06:27 Aux= 17:06:27 Message to Camera, serial 123243 queued 17:07:04 Received message from Master: op=PointingHead serial=123256 17:07:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:07:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:07:04 Point started: ret=0 17:07:04 point_skyscan result=0 17:07:05 Check angles 17:07:05 SkyScan query 17:07:05 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.915<-13461 Statuses=0009 0009 17:07:05 Msec=0 True Az=153.12 Ze=-21.915 Az status=0009 Ze status=0009 17:07:06 Check angles 17:07:06 SkyScan query 17:07:06 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.9<-12060 Statuses=0009 0009 17:07:06 Msec=750 True Az=135.675 Ze=-0.9 Az status=0009 Ze status=0009 17:07:06 Check angles 17:07:06 SkyScan query 17:07:07 SkyScan query done: ret=0 az=118.08<-7872 ze=20.025<-10665 Statuses=0009 0009 17:07:07 Msec=1500 True Az=118.08 Ze=20.025 Az status=0009 Ze status=0009 17:07:07 Check angles 17:07:07 SkyScan query 17:07:08 SkyScan query done: ret=0 az=100.71<-6714 ze=41.025<-9265 Statuses=0009 0009 17:07:08 Msec=2250 True Az=100.71 Ze=41.025 Az status=0009 Ze status=0009 17:07:08 Check angles 17:07:08 SkyScan query 17:07:08 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 17:07:08 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 17:07:09 Check angles 17:07:09 SkyScan query 17:07:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:07:09 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:07:09 Message to Master queued w/err=0: serial=123256 error=0 17:07:14 Received message from Master: op=Filter serial=123257 17:07:14 Color wheel filter change from 0 to 0 17:07:14 FLIGetFilterPos err=0 currentPosition=0 17:07:14 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:14 Filter is already there-color wheel unchanged 17:07:14 Received message from Master: op=Shutter serial=123258 17:07:14 Shutter LASER close 17:07:14 Received message from Camera: op=State serial=123260 17:07:14 GetSingleValue result=40 Value=cccccccc 17:07:14 SkyScan query 17:07:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:07:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:15 Parameters OK 17:07:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:15 Set A/D data flow result=40 17:07:15 Set A/D channel type result=40 17:07:15 Set A/D encoding result=40 17:07:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:15 Set channel filter=0.000000e+000 result=40 17:07:15 Config A/D Result=40 17:07:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:15 Get A/D filter: -9.255963e+061 result=40 17:07:15 Get A/D value=-858993460 result=40 17:07:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:15 Parameters OK 17:07:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:15 Set A/D data flow result=40 17:07:15 Set A/D channel type result=40 17:07:15 Set A/D encoding result=40 17:07:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:15 Set channel filter=0.000000e+000 result=40 17:07:15 Config A/D Result=40 17:07:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:15 Get A/D filter: -9.255963e+061 result=40 17:07:15 Get A/D value=-858993460 result=40 17:07:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:15 Aux= 17:07:15 Message to Camera, serial 123260 queued 17:07:52 Received message from Master: op=PointingHead serial=123273 17:07:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:07:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:07:52 Point started: ret=0 17:07:52 point_skyscan result=0 17:07:53 Check angles 17:07:53 SkyScan query 17:07:54 SkyScan query done: ret=0 az=108.78<-7252 ze=38.475<-9435 Statuses=0009 0008 17:07:54 Msec=0 True Az=108.78 Ze=38.475 Az status=0009 Ze status=0008 17:07:54 Check angles 17:07:54 SkyScan query 17:07:54 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 17:07:54 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 17:07:54 Check angles 17:07:54 SkyScan query 17:07:55 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 17:07:55 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 17:07:55 Check angles 17:07:55 SkyScan query 17:07:56 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 17:07:56 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 17:07:56 Check angles 17:07:56 SkyScan query 17:07:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:07:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:07:57 Check angles 17:07:57 SkyScan query 17:07:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:07:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:07:57 Message to Master queued w/err=0: serial=123273 error=0 17:08:02 Received message from Master: op=Filter serial=123274 17:08:02 Color wheel filter change from 0 to 0 17:08:02 FLIGetFilterPos err=0 currentPosition=0 17:08:02 FLIGetStepsRemaining err=0 RemainingSteps=0 17:08:02 Filter is already there-color wheel unchanged 17:08:02 Received message from Master: op=Shutter serial=123275 17:08:02 Shutter LASER close 17:08:02 Received message from Camera: op=State serial=123277 17:08:02 GetSingleValue result=40 Value=cccccccc 17:08:02 SkyScan query 17:08:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:08:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:03 Parameters OK 17:08:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:03 Set A/D data flow result=40 17:08:03 Set A/D channel type result=40 17:08:03 Set A/D encoding result=40 17:08:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:03 Set channel filter=0.000000e+000 result=40 17:08:03 Config A/D Result=40 17:08:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:03 Get A/D filter: -9.255963e+061 result=40 17:08:03 Get A/D value=-858993460 result=40 17:08:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:03 Parameters OK 17:08:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:03 Set A/D data flow result=40 17:08:03 Set A/D channel type result=40 17:08:03 Set A/D encoding result=40 17:08:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:03 Set channel filter=0.000000e+000 result=40 17:08:03 Config A/D Result=40 17:08:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:03 Get A/D filter: -9.255963e+061 result=40 17:08:03 Get A/D value=-858993460 result=40 17:08:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:08:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:08:03 Aux= 17:08:03 Message to Camera, serial 123277 queued 17:08:40 Received message from Master: op=PointingHead serial=123290 17:08:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:08:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:08:40 Point started: ret=0 17:08:40 point_skyscan result=0 17:08:41 Check angles 17:08:41 SkyScan query 17:08:42 SkyScan query done: ret=0 az=153.105<-10207 ze=8.97<-11402 Statuses=0009 0009 17:08:42 Msec=0 True Az=153.105 Ze=8.97 Az status=0009 Ze status=0009 17:08:42 Check angles 17:08:42 SkyScan query 17:08:42 SkyScan query done: ret=0 az=135.63<-9042 ze=-12.015<-12801 Statuses=0009 0009 17:08:42 Msec=750 True Az=135.63 Ze=-12.015 Az status=0009 Ze status=0009 17:08:42 Check angles 17:08:42 SkyScan query 17:08:43 SkyScan query done: ret=0 az=118.08<-7872 ze=-32.91<-14194 Statuses=0009 0009 17:08:43 Msec=1500 True Az=118.08 Ze=-32.91 Az status=0009 Ze status=0009 17:08:43 Check angles 17:08:43 SkyScan query 17:08:44 SkyScan query done: ret=0 az=100.68<-6712 ze=-51.51<-15434 Statuses=0009 0009 17:08:44 Msec=2250 True Az=100.68 Ze=-51.51 Az status=0009 Ze status=0009 17:08:44 Check angles 17:08:44 SkyScan query 17:08:45 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:08:45 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:08:45 Check angles 17:08:45 SkyScan query 17:08:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:08:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:08:45 Message to Master queued w/err=0: serial=123290 error=0 17:08:50 Received message from Master: op=Filter serial=123291 17:08:50 Color wheel filter change from 0 to 0 17:08:50 FLIGetFilterPos err=0 currentPosition=0 17:08:50 FLIGetStepsRemaining err=0 RemainingSteps=0 17:08:50 Filter is already there-color wheel unchanged 17:08:50 Received message from Master: op=Shutter serial=123292 17:08:50 Shutter LASER close 17:08:51 Received message from Camera: op=State serial=123294 17:08:51 GetSingleValue result=40 Value=cccccccc 17:08:51 SkyScan query 17:08:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:51 Parameters OK 17:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:51 Set A/D data flow result=40 17:08:51 Set A/D channel type result=40 17:08:51 Set A/D encoding result=40 17:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:51 Set channel filter=0.000000e+000 result=40 17:08:51 Config A/D Result=40 17:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:51 Get A/D filter: -9.255963e+061 result=40 17:08:51 Get A/D value=-858993460 result=40 17:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:51 Parameters OK 17:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:51 Set A/D data flow result=40 17:08:51 Set A/D channel type result=40 17:08:51 Set A/D encoding result=40 17:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:51 Set channel filter=0.000000e+000 result=40 17:08:51 Config A/D Result=40 17:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:51 Get A/D filter: -9.255963e+061 result=40 17:08:51 Get A/D value=-858993460 result=40 17:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:08:51 Aux= 17:08:51 Message to Camera, serial 123294 queued 17:09:28 Received message from Master: op=PointingHead serial=123307 17:09:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:09:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:09:28 Point started: ret=0 17:09:28 point_skyscan result=0 17:09:29 Check angles 17:09:29 SkyScan query 17:09:30 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.195<-17413 Statuses=0009 0009 17:09:30 Msec=0 True Az=108.87 Ze=-81.195 Az status=0009 Ze status=0009 17:09:30 Check angles 17:09:30 SkyScan query 17:09:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.6<-18840 Statuses=0008 0009 17:09:30 Msec=750 True Az=112.995 Ze=-102.6 Az status=0008 Ze status=0009 17:09:31 Check angles 17:09:31 SkyScan query 17:09:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.54<-20236 Statuses=0008 0009 17:09:31 Msec=1500 True Az=112.995 Ze=-123.54 Az status=0008 Ze status=0009 17:09:31 Check angles 17:09:31 SkyScan query 17:09:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 17:09:32 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 17:09:32 Check angles 17:09:32 SkyScan query 17:09:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.855<-23057 Statuses=0008 0009 17:09:33 Msec=3000 True Az=112.995 Ze=-165.855 Az status=0008 Ze status=0009 17:09:33 Check angles 17:09:33 SkyScan query 17:09:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:09:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:09:33 Message to Master queued w/err=0: serial=123307 error=0 17:09:38 Received message from Master: op=Filter serial=123308 17:09:38 Color wheel filter change from 0 to 0 17:09:38 FLIGetFilterPos err=0 currentPosition=0 17:09:38 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:38 Filter is already there-color wheel unchanged 17:09:39 Received message from Master: op=Shutter serial=123309 17:09:39 Shutter LASER open 17:09:39 Received message from Camera: op=State serial=123311 17:09:39 GetSingleValue result=40 Value=cccccccc 17:09:39 SkyScan query 17:09:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:09:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:39 Parameters OK 17:09:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:39 Set A/D data flow result=40 17:09:39 Set A/D channel type result=40 17:09:39 Set A/D encoding result=40 17:09:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:39 Set channel filter=0.000000e+000 result=40 17:09:39 Config A/D Result=40 17:09:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:39 Get A/D filter: -9.255963e+061 result=40 17:09:39 Get A/D value=-858993460 result=40 17:09:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:39 Parameters OK 17:09:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:39 Set A/D data flow result=40 17:09:39 Set A/D channel type result=40 17:09:39 Set A/D encoding result=40 17:09:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:39 Set channel filter=0.000000e+000 result=40 17:09:39 Config A/D Result=40 17:09:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:39 Get A/D filter: -9.255963e+061 result=40 17:09:39 Get A/D value=-858993460 result=40 17:09:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:39 Aux= 17:09:39 Message to Camera, serial 123311 queued 17:09:48 Received message from Master: op=Shutter serial=123321 17:09:48 Shutter LASER close 17:09:48 Received message from Master: op=PointingHead serial=123325 17:09:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:09:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:09:48 Point started: ret=0 17:09:48 point_skyscan result=0 17:09:49 Check angles 17:09:49 SkyScan query 17:09:50 SkyScan query done: ret=0 az=89.85<-5990 ze=157.185<-1521 Statuses=0009 0009 17:09:50 Msec=0 True Az=89.85 Ze=157.185 Az status=0009 Ze status=0009 17:09:50 Check angles 17:09:50 SkyScan query 17:09:51 SkyScan query done: ret=0 az=71.985<-4799 ze=135.78<-2948 Statuses=0009 0009 17:09:51 Msec=750 True Az=71.985 Ze=135.78 Az status=0009 Ze status=0009 17:09:51 Check angles 17:09:51 SkyScan query 17:09:51 SkyScan query done: ret=0 az=54.255<-3617 ze=114.345<-4377 Statuses=0009 0009 17:09:51 Msec=1500 True Az=54.255 Ze=114.345 Az status=0009 Ze status=0009 17:09:52 Check angles 17:09:52 SkyScan query 17:09:52 SkyScan query done: ret=0 az=41.01<-2734 ze=93.42<-5772 Statuses=0009 0009 17:09:52 Msec=2250 True Az=41.01 Ze=93.42 Az status=0009 Ze status=0009 17:09:52 Check angles 17:09:52 SkyScan query 17:09:53 SkyScan query done: ret=0 az=40.98<-2732 ze=72.45<-7170 Statuses=0008 0009 17:09:53 Msec=3000 True Az=40.98 Ze=72.45 Az status=0008 Ze status=0009 17:09:53 Check angles 17:09:53 SkyScan query 17:09:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 17:09:54 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 17:09:54 Check angles 17:09:54 SkyScan query 17:09:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:09:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:09:54 Message to Master queued w/err=0: serial=123325 error=0 17:09:59 Received message from Master: op=Filter serial=123326 17:09:59 Color wheel filter change from 0 to 0 17:09:59 FLIGetFilterPos err=0 currentPosition=0 17:09:59 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:59 Filter is already there-color wheel unchanged 17:10:00 Received message from Master: op=Shutter serial=123327 17:10:00 Shutter LASER close 17:10:00 Received message from Camera: op=State serial=123329 17:10:00 GetSingleValue result=40 Value=cccccccc 17:10:00 SkyScan query 17:10:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:10:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:00 Parameters OK 17:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:00 Set A/D data flow result=40 17:10:00 Set A/D channel type result=40 17:10:00 Set A/D encoding result=40 17:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:00 Set channel filter=0.000000e+000 result=40 17:10:00 Config A/D Result=40 17:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:00 Get A/D filter: -9.255963e+061 result=40 17:10:00 Get A/D value=-858993460 result=40 17:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:00 Parameters OK 17:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:00 Set A/D data flow result=40 17:10:00 Set A/D channel type result=40 17:10:00 Set A/D encoding result=40 17:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:00 Set channel filter=0.000000e+000 result=40 17:10:00 Config A/D Result=40 17:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:00 Get A/D filter: -9.255963e+061 result=40 17:10:00 Get A/D value=-858993460 result=40 17:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:10:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:10:00 Aux= 17:10:00 Message to Camera, serial 123329 queued 17:10:37 Received message from Master: op=PointingHead serial=123342 17:10:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:10:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:10:38 Point started: ret=0 17:10:38 point_skyscan result=0 17:10:38 Check angles 17:10:38 SkyScan query 17:10:39 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 17:10:39 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 17:10:39 Check angles 17:10:39 SkyScan query 17:10:40 SkyScan query done: ret=0 az=81.3<-5420 ze=66.495<-7567 Statuses=0009 0008 17:10:40 Msec=750 True Az=81.3 Ze=66.495 Az status=0009 Ze status=0008 17:10:40 Check angles 17:10:40 SkyScan query 17:10:40 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 17:10:40 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 17:10:41 Check angles 17:10:41 SkyScan query 17:10:41 SkyScan query done: ret=0 az=116.22<-7748 ze=66.495<-7567 Statuses=0009 0008 17:10:41 Msec=2250 True Az=116.22 Ze=66.495 Az status=0009 Ze status=0008 17:10:41 Check angles 17:10:41 SkyScan query 17:10:42 SkyScan query done: ret=0 az=133.86<-8924 ze=66.495<-7567 Statuses=0009 0008 17:10:42 Msec=3000 True Az=133.86 Ze=66.495 Az status=0009 Ze status=0008 17:10:42 Check angles 17:10:42 SkyScan query 17:10:43 SkyScan query done: ret=0 az=151.485<-10099 ze=66.495<-7567 Statuses=0009 0008 17:10:43 Msec=3750 True Az=151.485 Ze=66.495 Az status=0009 Ze status=0008 17:10:43 Check angles 17:10:43 SkyScan query 17:10:43 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 17:10:43 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 17:10:43 Message to Master queued w/err=0: serial=123342 error=0 17:10:48 Received message from Master: op=Filter serial=123343 17:10:48 Color wheel filter change from 0 to 0 17:10:48 FLIGetFilterPos err=0 currentPosition=0 17:10:48 FLIGetStepsRemaining err=0 RemainingSteps=0 17:10:48 Filter is already there-color wheel unchanged 17:10:49 Received message from Master: op=Shutter serial=123344 17:10:49 Shutter LASER close 17:10:49 Received message from Camera: op=State serial=123346 17:10:49 GetSingleValue result=40 Value=cccccccc 17:10:49 SkyScan query 17:10:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:10:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:49 Parameters OK 17:10:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:49 Set A/D data flow result=40 17:10:49 Set A/D channel type result=40 17:10:49 Set A/D encoding result=40 17:10:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:49 Set channel filter=0.000000e+000 result=40 17:10:49 Config A/D Result=40 17:10:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:49 Get A/D filter: -9.255963e+061 result=40 17:10:49 Get A/D value=-858993460 result=40 17:10:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:49 Parameters OK 17:10:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:49 Set A/D data flow result=40 17:10:49 Set A/D channel type result=40 17:10:49 Set A/D encoding result=40 17:10:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:49 Set channel filter=0.000000e+000 result=40 17:10:49 Config A/D Result=40 17:10:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:49 Get A/D filter: -9.255963e+061 result=40 17:10:49 Get A/D value=-858993460 result=40 17:10:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:10:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:10:49 Aux= 17:10:49 Message to Camera, serial 123346 queued 17:11:26 Received message from Master: op=PointingHead serial=123359 17:11:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:11:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:11:26 Point started: ret=0 17:11:26 point_skyscan result=0 17:11:27 Check angles 17:11:27 SkyScan query 17:11:28 SkyScan query done: ret=0 az=134.58<-8972 ze=36.24<-9584 Statuses=0009 0009 17:11:28 Msec=0 True Az=134.58 Ze=36.24 Az status=0009 Ze status=0009 17:11:28 Check angles 17:11:28 SkyScan query 17:11:28 SkyScan query done: ret=0 az=117.06<-7804 ze=15.33<-10978 Statuses=0009 0009 17:11:28 Msec=750 True Az=117.06 Ze=15.33 Az status=0009 Ze status=0009 17:11:29 Check angles 17:11:29 SkyScan query 17:11:29 SkyScan query done: ret=0 az=99.765<-6651 ze=-5.67<-12378 Statuses=0009 0009 17:11:29 Msec=1500 True Az=99.765 Ze=-5.67 Az status=0009 Ze status=0009 17:11:29 Check angles 17:11:29 SkyScan query 17:11:30 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.64<-13776 Statuses=0009 0009 17:11:30 Msec=2250 True Az=82.23 Ze=-26.64 Az status=0009 Ze status=0009 17:11:30 Check angles 17:11:30 SkyScan query 17:11:31 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.58<-14572 Statuses=0009 0008 17:11:31 Msec=3000 True Az=64.68 Ze=-38.58 Az status=0009 Ze status=0008 17:11:31 Check angles 17:11:31 SkyScan query 17:11:31 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.52<-14568 Statuses=0009 0008 17:11:31 Msec=3750 True Az=46.935 Ze=-38.52 Az status=0009 Ze status=0008 17:11:32 Check angles 17:11:32 SkyScan query 17:11:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:11:32 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:11:32 Message to Master queued w/err=0: serial=123359 error=0 17:11:37 Received message from Master: op=Filter serial=123360 17:11:37 Color wheel filter change from 0 to 0 17:11:37 FLIGetFilterPos err=0 currentPosition=0 17:11:37 FLIGetStepsRemaining err=0 RemainingSteps=0 17:11:37 Filter is already there-color wheel unchanged 17:11:37 Received message from Master: op=Shutter serial=123361 17:11:37 Shutter LASER close 17:11:37 Received message from Camera: op=State serial=123363 17:11:37 GetSingleValue result=40 Value=cccccccc 17:11:37 SkyScan query 17:11:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:11:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:38 Parameters OK 17:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:38 Set A/D data flow result=40 17:11:38 Set A/D channel type result=40 17:11:38 Set A/D encoding result=40 17:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:38 Set channel filter=0.000000e+000 result=40 17:11:38 Config A/D Result=40 17:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:38 Get A/D filter: -9.255963e+061 result=40 17:11:38 Get A/D value=-858993460 result=40 17:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:38 Parameters OK 17:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:38 Set A/D data flow result=40 17:11:38 Set A/D channel type result=40 17:11:38 Set A/D encoding result=40 17:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:38 Set channel filter=0.000000e+000 result=40 17:11:38 Config A/D Result=40 17:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:38 Get A/D filter: -9.255963e+061 result=40 17:11:38 Get A/D value=-858993460 result=40 17:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:11:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:11:38 Aux= 17:11:38 Message to Camera, serial 123363 queued 17:12:15 Received message from Master: op=PointingHead serial=123376 17:12:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:12:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:12:15 Point started: ret=0 17:12:15 point_skyscan result=0 17:12:16 Check angles 17:12:16 SkyScan query 17:12:16 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.115<-16541 Statuses=0009 0009 17:12:16 Msec=0 True Az=63.96 Ze=-68.115 Az status=0009 Ze status=0009 17:12:17 Check angles 17:12:17 SkyScan query 17:12:17 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.115<-17941 Statuses=0009 0009 17:12:17 Msec=750 True Az=81.315 Ze=-89.115 Az status=0009 Ze status=0009 17:12:17 Check angles 17:12:17 SkyScan query 17:12:18 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.535<-19369 Statuses=0009 0009 17:12:18 Msec=1500 True Az=99.33 Ze=-110.535 Az status=0009 Ze status=0009 17:12:18 Check angles 17:12:18 SkyScan query 17:12:19 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.46<-20764 Statuses=0009 0009 17:12:19 Msec=2250 True Az=116.82 Ze=-131.46 Az status=0009 Ze status=0009 17:12:19 Check angles 17:12:19 SkyScan query 17:12:20 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 17:12:20 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 17:12:20 Check angles 17:12:20 SkyScan query 17:12:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:12:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:12:20 Message to Master queued w/err=0: serial=123376 error=0 17:12:25 Received message from Master: op=Filter serial=123377 17:12:25 Color wheel filter change from 0 to 0 17:12:25 FLIGetFilterPos err=0 currentPosition=0 17:12:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:12:25 Filter is already there-color wheel unchanged 17:12:25 Received message from Master: op=Shutter serial=123378 17:12:25 Shutter LASER close 17:12:25 Received message from Camera: op=State serial=123380 17:12:25 GetSingleValue result=40 Value=cccccccc 17:12:25 SkyScan query 17:12:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:26 Parameters OK 17:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:26 Set A/D data flow result=40 17:12:26 Set A/D channel type result=40 17:12:26 Set A/D encoding result=40 17:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:26 Set channel filter=0.000000e+000 result=40 17:12:26 Config A/D Result=40 17:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:26 Get A/D filter: -9.255963e+061 result=40 17:12:26 Get A/D value=-858993460 result=40 17:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:26 Parameters OK 17:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:26 Set A/D data flow result=40 17:12:26 Set A/D channel type result=40 17:12:26 Set A/D encoding result=40 17:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:26 Set channel filter=0.000000e+000 result=40 17:12:26 Config A/D Result=40 17:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:26 Get A/D filter: -9.255963e+061 result=40 17:12:26 Get A/D value=-858993460 result=40 17:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:12:26 Aux= 17:12:26 Message to Camera, serial 123380 queued 17:13:03 Received message from Master: op=PointingHead serial=123393 17:13:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:13:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:13:03 Point started: ret=0 17:13:03 point_skyscan result=0 17:13:04 Check angles 17:13:04 SkyScan query 17:13:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 17:13:05 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 17:13:05 Check angles 17:13:05 SkyScan query 17:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:13:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:13:05 Message to Master queued w/err=0: serial=123393 error=0 17:13:10 Received message from Master: op=Filter serial=123394 17:13:10 Color wheel filter change from 0 to 0 17:13:10 FLIGetFilterPos err=0 currentPosition=0 17:13:10 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:10 Filter is already there-color wheel unchanged 17:13:10 Received message from Master: op=Shutter serial=123395 17:13:10 Shutter LASER open 17:13:11 Received message from Camera: op=State serial=123397 17:13:11 GetSingleValue result=40 Value=cccccccc 17:13:11 SkyScan query 17:13:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:13:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:11 Parameters OK 17:13:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:11 Set A/D data flow result=40 17:13:11 Set A/D channel type result=40 17:13:11 Set A/D encoding result=40 17:13:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:11 Set channel filter=0.000000e+000 result=40 17:13:11 Config A/D Result=40 17:13:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:11 Get A/D filter: -9.255963e+061 result=40 17:13:11 Get A/D value=-858993460 result=40 17:13:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:11 Parameters OK 17:13:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:11 Set A/D data flow result=40 17:13:11 Set A/D channel type result=40 17:13:11 Set A/D encoding result=40 17:13:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:11 Set channel filter=0.000000e+000 result=40 17:13:11 Config A/D Result=40 17:13:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:11 Get A/D filter: -9.255963e+061 result=40 17:13:11 Get A/D value=-858993460 result=40 17:13:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:11 Aux= 17:13:11 Message to Camera, serial 123397 queued 17:13:20 Received message from Master: op=Shutter serial=123407 17:13:20 Shutter LASER close 17:13:20 Received message from Master: op=PointingHead serial=123411 17:13:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:13:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:13:21 Point started: ret=0 17:13:21 point_skyscan result=0 17:13:21 Check angles 17:13:21 SkyScan query 17:13:22 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.98<-21532 Statuses=0009 0009 17:13:22 Msec=0 True Az=136.185 Ze=-142.98 Az status=0009 Ze status=0009 17:13:22 Check angles 17:13:22 SkyScan query 17:13:23 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.59<-20106 Statuses=0009 0009 17:13:23 Msec=750 True Az=154.02 Ze=-121.59 Az status=0009 Ze status=0009 17:13:23 Check angles 17:13:23 SkyScan query 17:13:23 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.56<-18704 Statuses=0009 0009 17:13:23 Msec=1500 True Az=171.555 Ze=-100.56 Az status=0009 Ze status=0009 17:13:24 Check angles 17:13:24 SkyScan query 17:13:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.215<-17281 Statuses=0008 0009 17:13:24 Msec=2250 True Az=176.01 Ze=-79.215 Az status=0008 Ze status=0009 17:13:24 Check angles 17:13:24 SkyScan query 17:13:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.87<-15858 Statuses=0008 0009 17:13:25 Msec=3000 True Az=176.01 Ze=-57.87 Az status=0008 Ze status=0009 17:13:25 Check angles 17:13:25 SkyScan query 17:13:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 17:13:26 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 17:13:26 Message to Master queued w/err=0: serial=123411 error=0 17:13:31 Received message from Master: op=Filter serial=123412 17:13:31 Color wheel filter change from 0 to 0 17:13:31 FLIGetFilterPos err=0 currentPosition=0 17:13:31 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:31 Filter is already there-color wheel unchanged 17:13:31 Received message from Master: op=Shutter serial=123413 17:13:31 Shutter LASER close 17:13:31 Received message from Camera: op=State serial=123415 17:13:31 GetSingleValue result=40 Value=cccccccc 17:13:31 SkyScan query 17:13:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:13:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:32 Parameters OK 17:13:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:32 Set A/D data flow result=40 17:13:32 Set A/D channel type result=40 17:13:32 Set A/D encoding result=40 17:13:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:32 Set channel filter=0.000000e+000 result=40 17:13:32 Config A/D Result=40 17:13:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:32 Get A/D filter: -9.255963e+061 result=40 17:13:32 Get A/D value=-858993460 result=40 17:13:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:32 Parameters OK 17:13:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:32 Set A/D data flow result=40 17:13:32 Set A/D channel type result=40 17:13:32 Set A/D encoding result=40 17:13:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:32 Set channel filter=0.000000e+000 result=40 17:13:32 Config A/D Result=40 17:13:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:32 Get A/D filter: -9.255963e+061 result=40 17:13:32 Get A/D value=-858993460 result=40 17:13:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:32 Aux= 17:13:32 Message to Camera, serial 123415 queued 17:14:08 Received message from Master: op=PointingHead serial=123428 17:14:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:14:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:14:09 Point started: ret=0 17:14:09 point_skyscan result=0 17:14:10 Check angles 17:14:10 SkyScan query 17:14:10 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.735<-13449 Statuses=0009 0009 17:14:10 Msec=0 True Az=152.97 Ze=-21.735 Az status=0009 Ze status=0009 17:14:10 Check angles 17:14:10 SkyScan query 17:14:11 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.735<-12049 Statuses=0009 0009 17:14:11 Msec=750 True Az=135.57 Ze=-0.735 Az status=0009 Ze status=0009 17:14:11 Check angles 17:14:11 SkyScan query 17:14:12 SkyScan query done: ret=0 az=117.96<-7864 ze=20.19<-10654 Statuses=0009 0009 17:14:12 Msec=1500 True Az=117.96 Ze=20.19 Az status=0009 Ze status=0009 17:14:12 Check angles 17:14:12 SkyScan query 17:14:12 SkyScan query done: ret=0 az=100.605<-6707 ze=41.175<-9255 Statuses=0009 0009 17:14:12 Msec=2250 True Az=100.605 Ze=41.175 Az status=0009 Ze status=0009 17:14:13 Check angles 17:14:13 SkyScan query 17:14:13 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 17:14:13 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 17:14:13 Check angles 17:14:13 SkyScan query 17:14:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:14:14 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:14:14 Message to Master queued w/err=0: serial=123428 error=0 17:14:19 Received message from Master: op=Filter serial=123429 17:14:19 Color wheel filter change from 0 to 0 17:14:19 FLIGetFilterPos err=0 currentPosition=0 17:14:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:14:19 Filter is already there-color wheel unchanged 17:14:19 Received message from Master: op=Shutter serial=123430 17:14:19 Shutter LASER close 17:14:19 Received message from Camera: op=State serial=123432 17:14:19 GetSingleValue result=40 Value=cccccccc 17:14:19 SkyScan query 17:14:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:14:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:20 Parameters OK 17:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:20 Set A/D data flow result=40 17:14:20 Set A/D channel type result=40 17:14:20 Set A/D encoding result=40 17:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:20 Set channel filter=0.000000e+000 result=40 17:14:20 Config A/D Result=40 17:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:20 Get A/D filter: -9.255963e+061 result=40 17:14:20 Get A/D value=-858993460 result=40 17:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:20 Parameters OK 17:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:20 Set A/D data flow result=40 17:14:20 Set A/D channel type result=40 17:14:20 Set A/D encoding result=40 17:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:20 Set channel filter=0.000000e+000 result=40 17:14:20 Config A/D Result=40 17:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:20 Get A/D filter: -9.255963e+061 result=40 17:14:20 Get A/D value=-858993460 result=40 17:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:14:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:14:20 Aux= 17:14:20 Message to Camera, serial 123432 queued 17:14:57 Received message from Master: op=PointingHead serial=123445 17:14:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:14:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:14:57 Point started: ret=0 17:14:57 point_skyscan result=0 17:14:58 Check angles 17:14:58 SkyScan query 17:14:58 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 17:14:58 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 17:14:58 Check angles 17:14:58 SkyScan query 17:14:59 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 17:14:59 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 17:14:59 Check angles 17:14:59 SkyScan query 17:15:00 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 17:15:00 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 17:15:00 Check angles 17:15:00 SkyScan query 17:15:00 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 17:15:00 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 17:15:01 Check angles 17:15:01 SkyScan query 17:15:01 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:15:01 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:15:01 Check angles 17:15:01 SkyScan query 17:15:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:15:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:15:02 Message to Master queued w/err=0: serial=123445 error=0 17:15:07 Received message from Master: op=Filter serial=123446 17:15:07 Color wheel filter change from 0 to 0 17:15:07 FLIGetFilterPos err=0 currentPosition=0 17:15:07 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:07 Filter is already there-color wheel unchanged 17:15:07 Received message from Master: op=Shutter serial=123447 17:15:07 Shutter LASER close 17:15:07 Received message from Camera: op=State serial=123449 17:15:07 GetSingleValue result=40 Value=cccccccc 17:15:07 SkyScan query 17:15:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:15:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:08 Parameters OK 17:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:08 Set A/D data flow result=40 17:15:08 Set A/D channel type result=40 17:15:08 Set A/D encoding result=40 17:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:08 Set channel filter=0.000000e+000 result=40 17:15:08 Config A/D Result=40 17:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:08 Get A/D filter: -9.255963e+061 result=40 17:15:08 Get A/D value=-858993460 result=40 17:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:08 Parameters OK 17:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:08 Set A/D data flow result=40 17:15:08 Set A/D channel type result=40 17:15:08 Set A/D encoding result=40 17:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:08 Set channel filter=0.000000e+000 result=40 17:15:08 Config A/D Result=40 17:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:08 Get A/D filter: -9.255963e+061 result=40 17:15:08 Get A/D value=-858993460 result=40 17:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:08 Aux= 17:15:08 Message to Camera, serial 123449 queued 17:15:27 Received message from Master: op=Identify serial=123450 17:15:44 Received message from Master: op=PointingHead serial=123464 17:15:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:15:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:15:44 Point started: ret=0 17:15:44 point_skyscan result=0 17:15:45 Check angles 17:15:45 SkyScan query 17:15:45 SkyScan query done: ret=0 az=152.595<-10173 ze=8.145<-11457 Statuses=0009 0009 17:15:45 Msec=0 True Az=152.595 Ze=8.145 Az status=0009 Ze status=0009 17:15:46 Check angles 17:15:46 SkyScan query 17:15:46 SkyScan query done: ret=0 az=134.61<-8974 ze=-13.23<-12882 Statuses=0009 0009 17:15:46 Msec=750 True Az=134.61 Ze=-13.23 Az status=0009 Ze status=0009 17:15:46 Check angles 17:15:46 SkyScan query 17:15:47 SkyScan query done: ret=0 az=117.27<-7818 ze=-34.2<-14280 Statuses=0009 0009 17:15:47 Msec=1500 True Az=117.27 Ze=-34.2 Az status=0009 Ze status=0009 17:15:47 Check angles 17:15:47 SkyScan query 17:15:48 SkyScan query done: ret=0 az=99.735<-6649 ze=-51.555<-15437 Statuses=0009 0009 17:15:48 Msec=2250 True Az=99.735 Ze=-51.555 Az status=0009 Ze status=0009 17:15:48 Check angles 17:15:48 SkyScan query 17:15:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 17:15:48 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 17:15:49 Check angles 17:15:49 SkyScan query 17:15:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:15:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:15:49 Message to Master queued w/err=0: serial=123464 error=0 [UTC 2018-12-13 17:15:52] 17:15:54 Received message from Master: op=Filter serial=123465 17:15:54 Color wheel filter change from 0 to 0 17:15:54 FLIGetFilterPos err=0 currentPosition=0 17:15:54 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:54 Filter is already there-color wheel unchanged 17:15:54 Received message from Master: op=Shutter serial=123466 17:15:54 Shutter LASER close 17:15:54 Received message from Camera: op=State serial=123468 17:15:54 GetSingleValue result=40 Value=cccccccc 17:15:54 SkyScan query 17:15:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:15:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:55 Parameters OK 17:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:55 Set A/D data flow result=40 17:15:55 Set A/D channel type result=40 17:15:55 Set A/D encoding result=40 17:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:55 Set channel filter=0.000000e+000 result=40 17:15:55 Config A/D Result=40 17:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:55 Get A/D filter: -9.255963e+061 result=40 17:15:55 Get A/D value=-858993460 result=40 17:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:55 Parameters OK 17:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:55 Set A/D data flow result=40 17:15:55 Set A/D channel type result=40 17:15:55 Set A/D encoding result=40 17:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:55 Set channel filter=0.000000e+000 result=40 17:15:55 Config A/D Result=40 17:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:55 Get A/D filter: -9.255963e+061 result=40 17:15:55 Get A/D value=-858993460 result=40 17:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:55 Aux= 17:15:55 Message to Camera, serial 123468 queued 17:16:32 Received message from Master: op=PointingHead serial=123481 17:16:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:16:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:16:32 Point started: ret=0 17:16:32 point_skyscan result=0 17:16:33 Check angles 17:16:33 SkyScan query 17:16:33 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.33<-17422 Statuses=0009 0009 17:16:33 Msec=0 True Az=109.005 Ze=-81.33 Az status=0009 Ze status=0009 17:16:34 Check angles 17:16:34 SkyScan query 17:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 17:16:34 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 17:16:34 Check angles 17:16:34 SkyScan query 17:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.125<-20275 Statuses=0008 0009 17:16:35 Msec=1500 True Az=112.995 Ze=-124.125 Az status=0008 Ze status=0009 17:16:35 Check angles 17:16:35 SkyScan query 17:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 17:16:36 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 17:16:36 Check angles 17:16:36 SkyScan query 17:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.455<-23097 Statuses=0008 0009 17:16:36 Msec=3000 True Az=112.995 Ze=-166.455 Az status=0008 Ze status=0009 17:16:37 Check angles 17:16:37 SkyScan query 17:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:16:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:16:37 Message to Master queued w/err=0: serial=123481 error=0 17:16:42 Received message from Master: op=Filter serial=123482 17:16:42 Color wheel filter change from 0 to 0 17:16:42 FLIGetFilterPos err=0 currentPosition=0 17:16:42 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:42 Filter is already there-color wheel unchanged 17:16:42 Received message from Master: op=Shutter serial=123483 17:16:42 Shutter LASER open 17:16:43 Received message from Camera: op=State serial=123485 17:16:43 GetSingleValue result=40 Value=cccccccc 17:16:43 SkyScan query 17:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:16:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:43 Parameters OK 17:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:43 Set A/D data flow result=40 17:16:43 Set A/D channel type result=40 17:16:43 Set A/D encoding result=40 17:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:43 Set channel filter=0.000000e+000 result=40 17:16:43 Config A/D Result=40 17:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:43 Get A/D filter: -9.255963e+061 result=40 17:16:43 Get A/D value=-858993460 result=40 17:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:43 Parameters OK 17:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:43 Set A/D data flow result=40 17:16:43 Set A/D channel type result=40 17:16:43 Set A/D encoding result=40 17:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:43 Set channel filter=0.000000e+000 result=40 17:16:43 Config A/D Result=40 17:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:43 Get A/D filter: -9.255963e+061 result=40 17:16:43 Get A/D value=-858993460 result=40 17:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:43 Aux= 17:16:43 Message to Camera, serial 123485 queued 17:16:52 Received message from Master: op=Shutter serial=123495 17:16:52 Shutter LASER close 17:16:52 Received message from Master: op=PointingHead serial=123499 17:16:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:16:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:16:52 Point started: ret=0 17:16:52 point_skyscan result=0 17:16:53 Check angles 17:16:53 SkyScan query 17:16:54 SkyScan query done: ret=0 az=89.85<-5990 ze=157.41<-1506 Statuses=0009 0009 17:16:54 Msec=0 True Az=89.85 Ze=157.41 Az status=0009 Ze status=0009 17:16:54 Check angles 17:16:54 SkyScan query 17:16:54 SkyScan query done: ret=0 az=72.03<-4802 ze=136.02<-2932 Statuses=0009 0009 17:16:54 Msec=750 True Az=72.03 Ze=136.02 Az status=0009 Ze status=0009 17:16:55 Check angles 17:16:55 SkyScan query 17:16:55 SkyScan query done: ret=0 az=54.39<-3626 ze=114.6<-4360 Statuses=0009 0009 17:16:55 Msec=1500 True Az=54.39 Ze=114.6 Az status=0009 Ze status=0009 17:16:55 Check angles 17:16:55 SkyScan query 17:16:56 SkyScan query done: ret=0 az=41.025<-2735 ze=93.675<-5755 Statuses=0009 0009 17:16:56 Msec=2250 True Az=41.025 Ze=93.675 Az status=0009 Ze status=0009 17:16:56 Check angles 17:16:56 SkyScan query 17:16:57 SkyScan query done: ret=0 az=40.98<-2732 ze=72.285<-7181 Statuses=0008 0009 17:16:57 Msec=3000 True Az=40.98 Ze=72.285 Az status=0008 Ze status=0009 17:16:57 Check angles 17:16:57 SkyScan query 17:16:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.005<-8533 Statuses=0008 0009 17:16:57 Msec=3750 True Az=40.995 Ze=52.005 Az status=0008 Ze status=0009 17:16:58 Check angles 17:16:58 SkyScan query 17:16:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:16:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:16:58 Message to Master queued w/err=0: serial=123499 error=0 17:17:03 Received message from Master: op=Filter serial=123500 17:17:03 Color wheel filter change from 0 to 0 17:17:03 FLIGetFilterPos err=0 currentPosition=0 17:17:03 FLIGetStepsRemaining err=0 RemainingSteps=0 17:17:03 Filter is already there-color wheel unchanged 17:17:03 Received message from Master: op=Shutter serial=123501 17:17:03 Shutter LASER close 17:17:04 Received message from Camera: op=State serial=123503 17:17:04 GetSingleValue result=40 Value=cccccccc 17:17:04 SkyScan query 17:17:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:17:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:04 Parameters OK 17:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:04 Set A/D data flow result=40 17:17:04 Set A/D channel type result=40 17:17:04 Set A/D encoding result=40 17:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:04 Set channel filter=0.000000e+000 result=40 17:17:04 Config A/D Result=40 17:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:04 Get A/D filter: -9.255963e+061 result=40 17:17:04 Get A/D value=-858993460 result=40 17:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:04 Parameters OK 17:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:04 Set A/D data flow result=40 17:17:04 Set A/D channel type result=40 17:17:04 Set A/D encoding result=40 17:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:04 Set channel filter=0.000000e+000 result=40 17:17:04 Config A/D Result=40 17:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:04 Get A/D filter: -9.255963e+061 result=40 17:17:04 Get A/D value=-858993460 result=40 17:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:17:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:17:04 Aux= 17:17:04 Message to Camera, serial 123503 queued 17:17:41 Received message from Master: op=PointingHead serial=123516 17:17:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:17:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:17:41 Point started: ret=0 17:17:41 point_skyscan result=0 17:17:42 Check angles 17:17:42 SkyScan query 17:17:43 SkyScan query done: ret=0 az=63.9<-4260 ze=66.555<-7563 Statuses=0009 0008 17:17:43 Msec=0 True Az=63.9 Ze=66.555 Az status=0009 Ze status=0008 17:17:43 Check angles 17:17:43 SkyScan query 17:17:43 SkyScan query done: ret=0 az=81.075<-5405 ze=66.51<-7566 Statuses=0009 0008 17:17:43 Msec=750 True Az=81.075 Ze=66.51 Az status=0009 Ze status=0008 17:17:44 Check angles 17:17:44 SkyScan query 17:17:44 SkyScan query done: ret=0 az=98.625<-6575 ze=66.495<-7567 Statuses=0009 0008 17:17:44 Msec=1500 True Az=98.625 Ze=66.495 Az status=0009 Ze status=0008 17:17:44 Check angles 17:17:44 SkyScan query 17:17:45 SkyScan query done: ret=0 az=116.16<-7744 ze=66.495<-7567 Statuses=0009 0008 17:17:45 Msec=2250 True Az=116.16 Ze=66.495 Az status=0009 Ze status=0008 17:17:45 Check angles 17:17:45 SkyScan query 17:17:46 SkyScan query done: ret=0 az=133.695<-8913 ze=66.495<-7567 Statuses=0009 0008 17:17:46 Msec=3000 True Az=133.695 Ze=66.495 Az status=0009 Ze status=0008 17:17:46 Check angles 17:17:46 SkyScan query 17:17:46 SkyScan query done: ret=0 az=151.035<-10069 ze=66.495<-7567 Statuses=0009 0008 17:17:46 Msec=3750 True Az=151.035 Ze=66.495 Az status=0009 Ze status=0008 17:17:47 Check angles 17:17:47 SkyScan query 17:17:47 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 17:17:47 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 17:17:47 Message to Master queued w/err=0: serial=123516 error=0 17:17:52 Received message from Master: op=Filter serial=123517 17:17:52 Color wheel filter change from 0 to 0 17:17:52 FLIGetFilterPos err=0 currentPosition=0 17:17:52 FLIGetStepsRemaining err=0 RemainingSteps=0 17:17:52 Filter is already there-color wheel unchanged 17:17:52 Received message from Master: op=Shutter serial=123518 17:17:52 Shutter LASER close 17:17:52 Received message from Camera: op=State serial=123520 17:17:52 GetSingleValue result=40 Value=cccccccc 17:17:52 SkyScan query 17:17:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:17:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:53 Parameters OK 17:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:53 Set A/D data flow result=40 17:17:53 Set A/D channel type result=40 17:17:53 Set A/D encoding result=40 17:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:53 Set channel filter=0.000000e+000 result=40 17:17:53 Config A/D Result=40 17:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:53 Get A/D filter: -9.255963e+061 result=40 17:17:53 Get A/D value=-858993460 result=40 17:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:53 Parameters OK 17:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:53 Set A/D data flow result=40 17:17:53 Set A/D channel type result=40 17:17:53 Set A/D encoding result=40 17:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:53 Set channel filter=0.000000e+000 result=40 17:17:53 Config A/D Result=40 17:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:53 Get A/D filter: -9.255963e+061 result=40 17:17:53 Get A/D value=-858993460 result=40 17:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:17:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:17:53 Aux= 17:17:53 Message to Camera, serial 123520 queued 17:18:29 Received message from Master: op=PointingHead serial=123532 17:18:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:18:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:18:29 Point started: ret=0 17:18:29 point_skyscan result=0 17:18:30 Check angles 17:18:30 SkyScan query 17:18:30 SkyScan query done: ret=0 az=135.045<-9003 ze=36.705<-9553 Statuses=0009 0009 17:18:30 Msec=0 True Az=135.045 Ze=36.705 Az status=0009 Ze status=0009 17:18:31 Check angles 17:18:31 SkyScan query 17:18:31 SkyScan query done: ret=0 az=117.525<-7835 ze=15.795<-10947 Statuses=0009 0009 17:18:31 Msec=750 True Az=117.525 Ze=15.795 Az status=0009 Ze status=0009 17:18:31 Check angles 17:18:31 SkyScan query 17:18:32 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.61<-12374 Statuses=0009 0009 17:18:32 Msec=1500 True Az=99.81 Ze=-5.61 Az status=0009 Ze status=0009 17:18:32 Check angles 17:18:32 SkyScan query 17:18:33 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.565<-13771 Statuses=0009 0009 17:18:33 Msec=2250 True Az=82.29 Ze=-26.565 Az status=0009 Ze status=0009 17:18:33 Check angles 17:18:33 SkyScan query 17:18:33 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.58<-14572 Statuses=0009 0008 17:18:33 Msec=3000 True Az=64.725 Ze=-38.58 Az status=0009 Ze status=0008 17:18:34 Check angles 17:18:34 SkyScan query 17:18:34 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.52<-14568 Statuses=0009 0008 17:18:34 Msec=3750 True Az=46.98 Ze=-38.52 Az status=0009 Ze status=0008 17:18:34 Check angles 17:18:34 SkyScan query 17:18:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:18:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:18:35 Message to Master queued w/err=0: serial=123532 error=0 17:18:40 Received message from Master: op=Filter serial=123533 17:18:40 Color wheel filter change from 0 to 0 17:18:40 FLIGetFilterPos err=0 currentPosition=0 17:18:40 FLIGetStepsRemaining err=0 RemainingSteps=0 17:18:40 Filter is already there-color wheel unchanged 17:18:40 Received message from Master: op=Shutter serial=123534 17:18:40 Shutter LASER close 17:18:40 Received message from Camera: op=State serial=123536 17:18:40 GetSingleValue result=40 Value=cccccccc 17:18:40 SkyScan query 17:18:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:18:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:41 Parameters OK 17:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:41 Set A/D data flow result=40 17:18:41 Set A/D channel type result=40 17:18:41 Set A/D encoding result=40 17:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:41 Set channel filter=0.000000e+000 result=40 17:18:41 Config A/D Result=40 17:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:41 Get A/D filter: -9.255963e+061 result=40 17:18:41 Get A/D value=-858993460 result=40 17:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:41 Parameters OK 17:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:41 Set A/D data flow result=40 17:18:41 Set A/D channel type result=40 17:18:41 Set A/D encoding result=40 17:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:41 Set channel filter=0.000000e+000 result=40 17:18:41 Config A/D Result=40 17:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:41 Get A/D filter: -9.255963e+061 result=40 17:18:41 Get A/D value=-858993460 result=40 17:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:18:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:18:41 Aux= 17:18:41 Message to Camera, serial 123536 queued 17:19:18 Received message from Master: op=PointingHead serial=123549 17:19:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:19:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:19:18 Point started: ret=0 17:19:18 point_skyscan result=0 17:19:19 Check angles 17:19:19 SkyScan query 17:19:19 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.535<-16569 Statuses=0009 0009 17:19:19 Msec=0 True Az=64.215 Ze=-68.535 Az status=0009 Ze status=0009 17:19:19 Check angles 17:19:19 SkyScan query 17:19:20 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.52<-17968 Statuses=0009 0009 17:19:20 Msec=750 True Az=81.645 Ze=-89.52 Az status=0009 Ze status=0009 17:19:20 Check angles 17:19:20 SkyScan query 17:19:21 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.475<-19365 Statuses=0009 0009 17:19:21 Msec=1500 True Az=99.06 Ze=-110.475 Az status=0009 Ze status=0009 17:19:21 Check angles 17:19:21 SkyScan query 17:19:22 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.43<-20762 Statuses=0009 0009 17:19:22 Msec=2250 True Az=116.55 Ze=-131.43 Az status=0009 Ze status=0009 17:19:22 Check angles 17:19:22 SkyScan query 17:19:22 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 17:19:22 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 17:19:22 Check angles 17:19:22 SkyScan query 17:19:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 17:19:23 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 17:19:23 Message to Master queued w/err=0: serial=123549 error=0 17:19:28 Received message from Master: op=Filter serial=123550 17:19:28 Color wheel filter change from 0 to 0 17:19:28 FLIGetFilterPos err=0 currentPosition=0 17:19:28 FLIGetStepsRemaining err=0 RemainingSteps=0 17:19:28 Filter is already there-color wheel unchanged 17:19:28 Received message from Master: op=Shutter serial=123551 17:19:28 Shutter LASER close 17:19:28 Received message from Camera: op=State serial=123553 17:19:28 GetSingleValue result=40 Value=cccccccc 17:19:28 SkyScan query 17:19:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:19:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:29 Parameters OK 17:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:29 Set A/D data flow result=40 17:19:29 Set A/D channel type result=40 17:19:29 Set A/D encoding result=40 17:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:29 Set channel filter=0.000000e+000 result=40 17:19:29 Config A/D Result=40 17:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:29 Get A/D filter: -9.255963e+061 result=40 17:19:29 Get A/D value=-858993460 result=40 17:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:29 Parameters OK 17:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:29 Set A/D data flow result=40 17:19:29 Set A/D channel type result=40 17:19:29 Set A/D encoding result=40 17:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:29 Set channel filter=0.000000e+000 result=40 17:19:29 Config A/D Result=40 17:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:29 Get A/D filter: -9.255963e+061 result=40 17:19:29 Get A/D value=-858993460 result=40 17:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:19:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:19:29 Aux= 17:19:29 Message to Camera, serial 123553 queued 17:20:06 Received message from Master: op=PointingHead serial=123566 17:20:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:20:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:20:06 Point started: ret=0 17:20:06 point_skyscan result=0 17:20:07 Check angles 17:20:07 SkyScan query 17:20:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 17:20:07 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 17:20:08 Check angles 17:20:08 SkyScan query 17:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:20:08 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:20:08 Message to Master queued w/err=0: serial=123566 error=0 17:20:13 Received message from Master: op=Filter serial=123567 17:20:13 Color wheel filter change from 0 to 0 17:20:13 FLIGetFilterPos err=0 currentPosition=0 17:20:13 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:13 Filter is already there-color wheel unchanged 17:20:13 Received message from Master: op=Shutter serial=123568 17:20:13 Shutter LASER open 17:20:13 Received message from Camera: op=State serial=123570 17:20:13 GetSingleValue result=40 Value=cccccccc 17:20:13 SkyScan query 17:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:20:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:14 Parameters OK 17:20:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:14 Set A/D data flow result=40 17:20:14 Set A/D channel type result=40 17:20:14 Set A/D encoding result=40 17:20:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:14 Set channel filter=0.000000e+000 result=40 17:20:14 Config A/D Result=40 17:20:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:14 Get A/D filter: -9.255963e+061 result=40 17:20:14 Get A/D value=-858993460 result=40 17:20:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:14 Parameters OK 17:20:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:14 Set A/D data flow result=40 17:20:14 Set A/D channel type result=40 17:20:14 Set A/D encoding result=40 17:20:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:14 Set channel filter=0.000000e+000 result=40 17:20:14 Config A/D Result=40 17:20:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:14 Get A/D filter: -9.255963e+061 result=40 17:20:14 Get A/D value=-858993460 result=40 17:20:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:14 Aux= 17:20:14 Message to Camera, serial 123570 queued 17:20:22 Received message from Master: op=Shutter serial=123579 17:20:22 Shutter LASER close 17:20:22 Received message from Master: op=PointingHead serial=123583 17:20:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:20:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:20:22 Point started: ret=0 17:20:22 point_skyscan result=0 17:20:23 Check angles 17:20:23 SkyScan query 17:20:24 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.19<-21546 Statuses=0009 0009 17:20:24 Msec=0 True Az=135.96 Ze=-143.19 Az status=0009 Ze status=0009 17:20:24 Check angles 17:20:24 SkyScan query 17:20:25 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.25<-20150 Statuses=0009 0009 17:20:25 Msec=750 True Az=153.42 Ze=-122.25 Az status=0009 Ze status=0009 17:20:25 Check angles 17:20:25 SkyScan query 17:20:25 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.34<-18756 Statuses=0009 0009 17:20:25 Msec=1500 True Az=171.015 Ze=-101.34 Az status=0009 Ze status=0009 17:20:25 Check angles 17:20:25 SkyScan query 17:20:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.34<-17356 Statuses=0008 0009 17:20:26 Msec=2250 True Az=176.01 Ze=-80.34 Az status=0008 Ze status=0009 17:20:26 Check angles 17:20:26 SkyScan query 17:20:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.385<-15959 Statuses=0008 0009 17:20:27 Msec=3000 True Az=176.01 Ze=-59.385 Az status=0008 Ze status=0009 17:20:27 Check angles 17:20:27 SkyScan query 17:20:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:20:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:20:28 Message to Master queued w/err=0: serial=123583 error=0 17:20:33 Received message from Master: op=Filter serial=123584 17:20:33 Color wheel filter change from 0 to 0 17:20:33 FLIGetFilterPos err=0 currentPosition=0 17:20:33 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:33 Filter is already there-color wheel unchanged 17:20:33 Received message from Master: op=Shutter serial=123585 17:20:33 Shutter LASER close 17:20:33 Received message from Camera: op=State serial=123587 17:20:33 GetSingleValue result=40 Value=cccccccc 17:20:33 SkyScan query 17:20:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:20:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:33 Parameters OK 17:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:33 Set A/D data flow result=40 17:20:33 Set A/D channel type result=40 17:20:33 Set A/D encoding result=40 17:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:33 Set channel filter=0.000000e+000 result=40 17:20:33 Config A/D Result=40 17:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:33 Get A/D filter: -9.255963e+061 result=40 17:20:33 Get A/D value=-858993460 result=40 17:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:33 Parameters OK 17:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:33 Set A/D data flow result=40 17:20:33 Set A/D channel type result=40 17:20:33 Set A/D encoding result=40 17:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:33 Set channel filter=0.000000e+000 result=40 17:20:33 Config A/D Result=40 17:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:33 Get A/D filter: -9.255963e+061 result=40 17:20:33 Get A/D value=-858993460 result=40 17:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:33 Aux= 17:20:33 Message to Camera, serial 123587 queued 17:21:10 Received message from Master: op=PointingHead serial=123600 17:21:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:21:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:21:11 Point started: ret=0 17:21:11 point_skyscan result=0 17:21:11 Check angles 17:21:11 SkyScan query 17:21:12 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.225<-13415 Statuses=0009 0009 17:21:12 Msec=0 True Az=152.58 Ze=-21.225 Az status=0009 Ze status=0009 17:21:12 Check angles 17:21:12 SkyScan query 17:21:13 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.255<-12017 Statuses=0009 0009 17:21:13 Msec=750 True Az=135.09 Ze=-0.255 Az status=0009 Ze status=0009 17:21:13 Check angles 17:21:13 SkyScan query 17:21:14 SkyScan query done: ret=0 az=117.57<-7838 ze=20.67<-10622 Statuses=0009 0009 17:21:14 Msec=1500 True Az=117.57 Ze=20.67 Az status=0009 Ze status=0009 17:21:14 Check angles 17:21:14 SkyScan query 17:21:14 SkyScan query done: ret=0 az=100.2<-6680 ze=41.655<-9223 Statuses=0009 0009 17:21:14 Msec=2250 True Az=100.2 Ze=41.655 Az status=0009 Ze status=0009 17:21:14 Check angles 17:21:14 SkyScan query 17:21:15 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 17:21:15 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 17:21:15 Check angles 17:21:15 SkyScan query 17:21:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:21:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:21:16 Message to Master queued w/err=0: serial=123600 error=0 17:21:21 Received message from Master: op=Filter serial=123601 17:21:21 Color wheel filter change from 0 to 0 17:21:21 FLIGetFilterPos err=0 currentPosition=0 17:21:21 FLIGetStepsRemaining err=0 RemainingSteps=0 17:21:21 Filter is already there-color wheel unchanged 17:21:21 Received message from Master: op=Shutter serial=123602 17:21:21 Shutter LASER close 17:21:21 Received message from Camera: op=State serial=123604 17:21:21 GetSingleValue result=40 Value=cccccccc 17:21:21 SkyScan query 17:21:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:21:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:22 Parameters OK 17:21:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:22 Set A/D data flow result=40 17:21:22 Set A/D channel type result=40 17:21:22 Set A/D encoding result=40 17:21:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:22 Set channel filter=0.000000e+000 result=40 17:21:22 Config A/D Result=40 17:21:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:22 Get A/D filter: -9.255963e+061 result=40 17:21:22 Get A/D value=-858993460 result=40 17:21:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:22 Parameters OK 17:21:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:22 Set A/D data flow result=40 17:21:22 Set A/D channel type result=40 17:21:22 Set A/D encoding result=40 17:21:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:22 Set channel filter=0.000000e+000 result=40 17:21:22 Config A/D Result=40 17:21:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:22 Get A/D filter: -9.255963e+061 result=40 17:21:22 Get A/D value=-858993460 result=40 17:21:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:21:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:21:22 Aux= 17:21:22 Message to Camera, serial 123604 queued 17:21:58 Received message from Master: op=PointingHead serial=123617 17:21:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:21:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:21:59 Point started: ret=0 17:21:59 point_skyscan result=0 17:21:59 Check angles 17:21:59 SkyScan query 17:22:00 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 17:22:00 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 17:22:00 Check angles 17:22:00 SkyScan query 17:22:01 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 17:22:01 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 17:22:01 Check angles 17:22:01 SkyScan query 17:22:02 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 17:22:02 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 17:22:02 Check angles 17:22:02 SkyScan query 17:22:02 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 17:22:02 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 17:22:02 Check angles 17:22:02 SkyScan query 17:22:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:22:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:22:03 Check angles 17:22:03 SkyScan query 17:22:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:22:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:22:04 Message to Master queued w/err=0: serial=123617 error=0 17:22:09 Received message from Master: op=Filter serial=123618 17:22:09 Color wheel filter change from 0 to 0 17:22:09 FLIGetFilterPos err=0 currentPosition=0 17:22:09 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:09 Filter is already there-color wheel unchanged 17:22:09 Received message from Master: op=Shutter serial=123619 17:22:09 Shutter LASER close 17:22:09 Received message from Camera: op=State serial=123621 17:22:09 GetSingleValue result=40 Value=cccccccc 17:22:09 SkyScan query 17:22:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:22:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:10 Parameters OK 17:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:10 Set A/D data flow result=40 17:22:10 Set A/D channel type result=40 17:22:10 Set A/D encoding result=40 17:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:10 Set channel filter=0.000000e+000 result=40 17:22:10 Config A/D Result=40 17:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:10 Get A/D filter: -9.255963e+061 result=40 17:22:10 Get A/D value=-858993460 result=40 17:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:10 Parameters OK 17:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:10 Set A/D data flow result=40 17:22:10 Set A/D channel type result=40 17:22:10 Set A/D encoding result=40 17:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:10 Set channel filter=0.000000e+000 result=40 17:22:10 Config A/D Result=40 17:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:10 Get A/D filter: -9.255963e+061 result=40 17:22:10 Get A/D value=-858993460 result=40 17:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:10 Aux= 17:22:10 Message to Camera, serial 123621 queued 17:22:46 Received message from Master: op=PointingHead serial=123634 17:22:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:22:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:22:47 Point started: ret=0 17:22:47 point_skyscan result=0 17:22:48 Check angles 17:22:48 SkyScan query 17:22:48 SkyScan query done: ret=0 az=152.775<-10185 ze=8.475<-11435 Statuses=0009 0009 17:22:48 Msec=0 True Az=152.775 Ze=8.475 Az status=0009 Ze status=0009 17:22:48 Check angles 17:22:48 SkyScan query 17:22:49 SkyScan query done: ret=0 az=134.955<-8997 ze=-12.9<-12860 Statuses=0009 0009 17:22:49 Msec=750 True Az=134.955 Ze=-12.9 Az status=0009 Ze status=0009 17:22:49 Check angles 17:22:49 SkyScan query 17:22:50 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.87<-14258 Statuses=0009 0009 17:22:50 Msec=1500 True Az=117.525 Ze=-33.87 Az status=0009 Ze status=0009 17:22:50 Check angles 17:22:50 SkyScan query 17:22:50 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.57<-15438 Statuses=0009 0009 17:22:50 Msec=2250 True Az=100.125 Ze=-51.57 Az status=0009 Ze status=0009 17:22:51 Check angles 17:22:51 SkyScan query 17:22:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 17:22:51 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 17:22:51 Check angles 17:22:51 SkyScan query 17:22:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:22:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:22:52 Message to Master queued w/err=0: serial=123634 error=0 17:22:57 Received message from Master: op=Filter serial=123635 17:22:57 Color wheel filter change from 0 to 0 17:22:57 FLIGetFilterPos err=0 currentPosition=0 17:22:57 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:57 Filter is already there-color wheel unchanged 17:22:57 Received message from Master: op=Shutter serial=123636 17:22:57 Shutter LASER close 17:22:57 Received message from Camera: op=State serial=123638 17:22:57 GetSingleValue result=40 Value=cccccccc 17:22:57 SkyScan query 17:22:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:22:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:58 Parameters OK 17:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:58 Set A/D data flow result=40 17:22:58 Set A/D channel type result=40 17:22:58 Set A/D encoding result=40 17:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:58 Set channel filter=0.000000e+000 result=40 17:22:58 Config A/D Result=40 17:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:58 Get A/D filter: -9.255963e+061 result=40 17:22:58 Get A/D value=-858993460 result=40 17:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:58 Parameters OK 17:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:58 Set A/D data flow result=40 17:22:58 Set A/D channel type result=40 17:22:58 Set A/D encoding result=40 17:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:58 Set channel filter=0.000000e+000 result=40 17:22:58 Config A/D Result=40 17:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:58 Get A/D filter: -9.255963e+061 result=40 17:22:58 Get A/D value=-858993460 result=40 17:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:58 Aux= 17:22:58 Message to Camera, serial 123638 queued 17:23:35 Received message from Master: op=PointingHead serial=123651 17:23:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:23:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:23:35 Point started: ret=0 17:23:35 point_skyscan result=0 17:23:36 Check angles 17:23:36 SkyScan query 17:23:36 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.21<-17414 Statuses=0009 0009 17:23:36 Msec=0 True Az=108.945 Ze=-81.21 Az status=0009 Ze status=0009 17:23:36 Check angles 17:23:36 SkyScan query 17:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 17:23:37 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 17:23:37 Check angles 17:23:37 SkyScan query 17:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 17:23:38 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 17:23:38 Check angles 17:23:38 SkyScan query 17:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 17:23:38 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 17:23:39 Check angles 17:23:39 SkyScan query 17:23:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 17:23:39 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 17:23:39 Check angles 17:23:39 SkyScan query 17:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:23:40 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:23:40 Message to Master queued w/err=0: serial=123651 error=0 17:23:45 Received message from Master: op=Filter serial=123652 17:23:45 Color wheel filter change from 0 to 0 17:23:45 FLIGetFilterPos err=0 currentPosition=0 17:23:45 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:45 Filter is already there-color wheel unchanged 17:23:45 Received message from Master: op=Shutter serial=123653 17:23:45 Shutter LASER open 17:23:45 Received message from Camera: op=State serial=123655 17:23:45 GetSingleValue result=40 Value=cccccccc 17:23:45 SkyScan query 17:23:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:23:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:46 Parameters OK 17:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:46 Set A/D data flow result=40 17:23:46 Set A/D channel type result=40 17:23:46 Set A/D encoding result=40 17:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:46 Set channel filter=0.000000e+000 result=40 17:23:46 Config A/D Result=40 17:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:46 Get A/D filter: -9.255963e+061 result=40 17:23:46 Get A/D value=-858993460 result=40 17:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:46 Parameters OK 17:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:46 Set A/D data flow result=40 17:23:46 Set A/D channel type result=40 17:23:46 Set A/D encoding result=40 17:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:46 Set channel filter=0.000000e+000 result=40 17:23:46 Config A/D Result=40 17:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:46 Get A/D filter: -9.255963e+061 result=40 17:23:46 Get A/D value=-858993460 result=40 17:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:46 Aux= 17:23:46 Message to Camera, serial 123655 queued 17:23:54 Received message from Master: op=Shutter serial=123665 17:23:54 Shutter LASER close 17:23:55 Received message from Master: op=PointingHead serial=123669 17:23:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:23:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:23:55 Point started: ret=0 17:23:55 point_skyscan result=0 17:23:56 Check angles 17:23:56 SkyScan query 17:23:56 SkyScan query done: ret=0 az=89.85<-5990 ze=157.17<-1522 Statuses=0009 0009 17:23:56 Msec=0 True Az=89.85 Ze=157.17 Az status=0009 Ze status=0009 17:23:57 Check angles 17:23:57 SkyScan query 17:23:57 SkyScan query done: ret=0 az=72.27<-4818 ze=136.185<-2921 Statuses=0009 0009 17:23:57 Msec=750 True Az=72.27 Ze=136.185 Az status=0009 Ze status=0009 17:23:57 Check angles 17:23:57 SkyScan query 17:23:58 SkyScan query done: ret=0 az=54.915<-3661 ze=115.275<-4315 Statuses=0009 0009 17:23:58 Msec=1500 True Az=54.915 Ze=115.275 Az status=0009 Ze status=0009 17:23:58 Check angles 17:23:58 SkyScan query 17:23:59 SkyScan query done: ret=0 az=40.98<-2732 ze=94.29<-5714 Statuses=0009 0009 17:23:59 Msec=2250 True Az=40.98 Ze=94.29 Az status=0009 Ze status=0009 17:23:59 Check angles 17:23:59 SkyScan query 17:23:59 SkyScan query done: ret=0 az=40.995<-2733 ze=73.32<-7112 Statuses=0008 0009 17:23:59 Msec=3000 True Az=40.995 Ze=73.32 Az status=0008 Ze status=0009 17:24:00 Check angles 17:24:00 SkyScan query 17:24:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 17:24:00 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 17:24:00 Check angles 17:24:00 SkyScan query 17:24:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:24:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:24:01 Message to Master queued w/err=0: serial=123669 error=0 17:24:06 Received message from Master: op=Filter serial=123670 17:24:06 Color wheel filter change from 0 to 0 17:24:06 FLIGetFilterPos err=0 currentPosition=0 17:24:06 FLIGetStepsRemaining err=0 RemainingSteps=0 17:24:06 Filter is already there-color wheel unchanged 17:24:06 Received message from Master: op=Shutter serial=123671 17:24:06 Shutter LASER close 17:24:06 Received message from Camera: op=State serial=123673 17:24:06 GetSingleValue result=40 Value=cccccccc 17:24:06 SkyScan query 17:24:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:24:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:07 Parameters OK 17:24:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:07 Set A/D data flow result=40 17:24:07 Set A/D channel type result=40 17:24:07 Set A/D encoding result=40 17:24:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:07 Set channel filter=0.000000e+000 result=40 17:24:07 Config A/D Result=40 17:24:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:07 Get A/D filter: -9.255963e+061 result=40 17:24:07 Get A/D value=-858993460 result=40 17:24:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:07 Parameters OK 17:24:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:07 Set A/D data flow result=40 17:24:07 Set A/D channel type result=40 17:24:07 Set A/D encoding result=40 17:24:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:07 Set channel filter=0.000000e+000 result=40 17:24:07 Config A/D Result=40 17:24:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:07 Get A/D filter: -9.255963e+061 result=40 17:24:07 Get A/D value=-858993460 result=40 17:24:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:24:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:24:07 Aux= 17:24:07 Message to Camera, serial 123673 queued 17:24:44 Received message from Master: op=PointingHead serial=123686 17:24:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:24:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:24:44 Point started: ret=0 17:24:44 point_skyscan result=0 17:24:45 Check angles 17:24:45 SkyScan query 17:24:45 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 17:24:45 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 17:24:46 Check angles 17:24:46 SkyScan query 17:24:46 SkyScan query done: ret=0 az=81.81<-5454 ze=66.495<-7567 Statuses=0009 0008 17:24:46 Msec=750 True Az=81.81 Ze=66.495 Az status=0009 Ze status=0008 17:24:46 Check angles 17:24:46 SkyScan query 17:24:47 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 17:24:47 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 17:24:47 Check angles 17:24:47 SkyScan query 17:24:48 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 17:24:48 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 17:24:48 Check angles 17:24:48 SkyScan query 17:24:48 SkyScan query done: ret=0 az=134.265<-8951 ze=66.495<-7567 Statuses=0009 0008 17:24:48 Msec=3000 True Az=134.265 Ze=66.495 Az status=0009 Ze status=0008 17:24:49 Check angles 17:24:49 SkyScan query 17:24:49 SkyScan query done: ret=0 az=151.56<-10104 ze=66.495<-7567 Statuses=0009 0008 17:24:49 Msec=3750 True Az=151.56 Ze=66.495 Az status=0009 Ze status=0008 17:24:49 Check angles 17:24:49 SkyScan query 17:24:50 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 17:24:50 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 17:24:50 Message to Master queued w/err=0: serial=123686 error=0 17:24:55 Received message from Master: op=Filter serial=123687 17:24:55 Color wheel filter change from 0 to 0 17:24:55 FLIGetFilterPos err=0 currentPosition=0 17:24:55 FLIGetStepsRemaining err=0 RemainingSteps=0 17:24:55 Filter is already there-color wheel unchanged 17:24:55 Received message from Master: op=Shutter serial=123688 17:24:55 Shutter LASER close 17:24:55 Received message from Camera: op=State serial=123690 17:24:55 GetSingleValue result=40 Value=cccccccc 17:24:55 SkyScan query 17:24:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:24:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:56 Parameters OK 17:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:56 Set A/D data flow result=40 17:24:56 Set A/D channel type result=40 17:24:56 Set A/D encoding result=40 17:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:56 Set channel filter=0.000000e+000 result=40 17:24:56 Config A/D Result=40 17:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:56 Get A/D filter: -9.255963e+061 result=40 17:24:56 Get A/D value=-858993460 result=40 17:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:56 Parameters OK 17:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:56 Set A/D data flow result=40 17:24:56 Set A/D channel type result=40 17:24:56 Set A/D encoding result=40 17:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:56 Set channel filter=0.000000e+000 result=40 17:24:56 Config A/D Result=40 17:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:56 Get A/D filter: -9.255963e+061 result=40 17:24:56 Get A/D value=-858993460 result=40 17:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:24:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:24:56 Aux= 17:24:56 Message to Camera, serial 123690 queued 17:25:32 Received message from Master: op=PointingHead serial=123703 17:25:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:25:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:25:33 Point started: ret=0 17:25:33 point_skyscan result=0 17:25:34 Check angles 17:25:34 SkyScan query 17:25:34 SkyScan query done: ret=0 az=134.82<-8988 ze=36.51<-9566 Statuses=0009 0009 17:25:34 Msec=0 True Az=134.82 Ze=36.51 Az status=0009 Ze status=0009 17:25:34 Check angles 17:25:34 SkyScan query 17:25:35 SkyScan query done: ret=0 az=117.315<-7821 ze=15.6<-10960 Statuses=0009 0009 17:25:35 Msec=750 True Az=117.315 Ze=15.6 Az status=0009 Ze status=0009 17:25:35 Check angles 17:25:35 SkyScan query 17:25:36 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.415<-12361 Statuses=0009 0009 17:25:36 Msec=1500 True Az=99.84 Ze=-5.415 Az status=0009 Ze status=0009 17:25:36 Check angles 17:25:36 SkyScan query 17:25:36 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.82<-13788 Statuses=0009 0009 17:25:36 Msec=2250 True Az=82.125 Ze=-26.82 Az status=0009 Ze status=0009 17:25:37 Check angles 17:25:37 SkyScan query 17:25:37 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.58<-14572 Statuses=0009 0008 17:25:37 Msec=3000 True Az=64.62 Ze=-38.58 Az status=0009 Ze status=0008 [UTC 2018-12-13 17:25:37] 17:25:37 Check angles 17:25:37 SkyScan query 17:25:38 SkyScan query done: ret=0 az=45.705<-3047 ze=-38.52<-14568 Statuses=0009 0008 17:25:38 Msec=3750 True Az=45.705 Ze=-38.52 Az status=0009 Ze status=0008 17:25:38 Check angles 17:25:38 SkyScan query 17:25:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:25:39 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:25:39 Message to Master queued w/err=0: serial=123703 error=0 17:25:44 Received message from Master: op=Filter serial=123704 17:25:44 Color wheel filter change from 0 to 0 17:25:44 FLIGetFilterPos err=0 currentPosition=0 17:25:44 FLIGetStepsRemaining err=0 RemainingSteps=0 17:25:44 Filter is already there-color wheel unchanged 17:25:44 Received message from Master: op=Shutter serial=123705 17:25:44 Shutter LASER close 17:25:44 Received message from Camera: op=State serial=123707 17:25:44 GetSingleValue result=40 Value=cccccccc 17:25:44 SkyScan query 17:25:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:25:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:44 Parameters OK 17:25:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:44 Set A/D data flow result=40 17:25:44 Set A/D channel type result=40 17:25:44 Set A/D encoding result=40 17:25:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:44 Set channel filter=0.000000e+000 result=40 17:25:44 Config A/D Result=40 17:25:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:44 Get A/D filter: -9.255963e+061 result=40 17:25:44 Get A/D value=-858993460 result=40 17:25:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:44 Parameters OK 17:25:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:44 Set A/D data flow result=40 17:25:44 Set A/D channel type result=40 17:25:44 Set A/D encoding result=40 17:25:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:44 Set channel filter=0.000000e+000 result=40 17:25:44 Config A/D Result=40 17:25:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:44 Get A/D filter: -9.255963e+061 result=40 17:25:44 Get A/D value=-858993460 result=40 17:25:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:25:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:25:44 Aux= 17:25:44 Message to Camera, serial 123707 queued 17:26:21 Received message from Master: op=PointingHead serial=123720 17:26:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:26:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:26:22 Point started: ret=0 17:26:22 point_skyscan result=0 17:26:22 Check angles 17:26:22 SkyScan query 17:26:23 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.28<-16552 Statuses=0009 0009 17:26:23 Msec=0 True Az=63.975 Ze=-68.28 Az status=0009 Ze status=0009 17:26:23 Check angles 17:26:23 SkyScan query 17:26:24 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.7<-17980 Statuses=0009 0009 17:26:24 Msec=750 True Az=81.78 Ze=-89.7 Az status=0009 Ze status=0009 17:26:24 Check angles 17:26:24 SkyScan query 17:26:25 SkyScan query done: ret=0 az=99.42<-6628 ze=-110.685<-19379 Statuses=0009 0009 17:26:25 Msec=1500 True Az=99.42 Ze=-110.685 Az status=0009 Ze status=0009 17:26:25 Check angles 17:26:25 SkyScan query 17:26:25 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.595<-20773 Statuses=0009 0009 17:26:25 Msec=2250 True Az=116.925 Ze=-131.595 Az status=0009 Ze status=0009 17:26:25 Check angles 17:26:25 SkyScan query 17:26:26 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 17:26:26 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 17:26:26 Check angles 17:26:26 SkyScan query 17:26:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:26:27 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:26:27 Message to Master queued w/err=0: serial=123720 error=0 17:26:32 Received message from Master: op=Filter serial=123721 17:26:32 Color wheel filter change from 0 to 0 17:26:32 FLIGetFilterPos err=0 currentPosition=0 17:26:32 FLIGetStepsRemaining err=0 RemainingSteps=0 17:26:32 Filter is already there-color wheel unchanged 17:26:32 Received message from Master: op=Shutter serial=123722 17:26:32 Shutter LASER close 17:26:32 Received message from Camera: op=State serial=123724 17:26:32 GetSingleValue result=40 Value=cccccccc 17:26:32 SkyScan query 17:26:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:26:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:33 Parameters OK 17:26:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:33 Set A/D data flow result=40 17:26:33 Set A/D channel type result=40 17:26:33 Set A/D encoding result=40 17:26:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:33 Set channel filter=0.000000e+000 result=40 17:26:33 Config A/D Result=40 17:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:33 Get A/D filter: -9.255963e+061 result=40 17:26:33 Get A/D value=-858993460 result=40 17:26:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:33 Parameters OK 17:26:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:33 Set A/D data flow result=40 17:26:33 Set A/D channel type result=40 17:26:33 Set A/D encoding result=40 17:26:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:33 Set channel filter=0.000000e+000 result=40 17:26:33 Config A/D Result=40 17:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:33 Get A/D filter: -9.255963e+061 result=40 17:26:33 Get A/D value=-858993460 result=40 17:26:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:26:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:26:33 Aux= 17:26:33 Message to Camera, serial 123724 queued 17:27:09 Received message from Master: op=PointingHead serial=123737 17:27:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:27:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:27:10 Point started: ret=0 17:27:10 point_skyscan result=0 17:27:10 Check angles 17:27:10 SkyScan query 17:27:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 17:27:11 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 17:27:11 Check angles 17:27:11 SkyScan query 17:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:27:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:27:12 Message to Master queued w/err=0: serial=123737 error=0 17:27:17 Received message from Master: op=Filter serial=123738 17:27:17 Color wheel filter change from 0 to 0 17:27:17 FLIGetFilterPos err=0 currentPosition=0 17:27:17 FLIGetStepsRemaining err=0 RemainingSteps=0 17:27:17 Filter is already there-color wheel unchanged 17:27:17 Received message from Master: op=Shutter serial=123739 17:27:17 Shutter LASER open 17:27:17 Received message from Camera: op=State serial=123741 17:27:17 GetSingleValue result=40 Value=cccccccc 17:27:17 SkyScan query 17:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:27:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:18 Parameters OK 17:27:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:18 Set A/D data flow result=40 17:27:18 Set A/D channel type result=40 17:27:18 Set A/D encoding result=40 17:27:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:18 Set channel filter=0.000000e+000 result=40 17:27:18 Config A/D Result=40 17:27:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:18 Get A/D filter: -9.255963e+061 result=40 17:27:18 Get A/D value=-858993460 result=40 17:27:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:18 Parameters OK 17:27:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:18 Set A/D data flow result=40 17:27:18 Set A/D channel type result=40 17:27:18 Set A/D encoding result=40 17:27:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:18 Set channel filter=0.000000e+000 result=40 17:27:18 Config A/D Result=40 17:27:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:18 Get A/D filter: -9.255963e+061 result=40 17:27:18 Get A/D value=-858993460 result=40 17:27:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:27:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:27:18 Aux= 17:27:18 Message to Camera, serial 123741 queued 17:27:26 Received message from Master: op=Shutter serial=123751 17:27:26 Shutter LASER close 17:27:27 Received message from Master: op=PointingHead serial=123755 17:27:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:27:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:27:27 Point started: ret=0 17:27:27 point_skyscan result=0 17:27:28 Check angles 17:27:28 SkyScan query 17:27:28 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.265<-21551 Statuses=0009 0009 17:27:28 Msec=0 True Az=135.915 Ze=-143.265 Az status=0009 Ze status=0009 17:27:29 Check angles 17:27:29 SkyScan query 17:27:29 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.31<-20154 Statuses=0009 0009 17:27:29 Msec=750 True Az=153.36 Ze=-122.31 Az status=0009 Ze status=0009 17:27:29 Check angles 17:27:29 SkyScan query 17:27:30 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.905<-18727 Statuses=0009 0009 17:27:30 Msec=1500 True Az=171.24 Ze=-100.905 Az status=0009 Ze status=0009 17:27:30 Check angles 17:27:30 SkyScan query 17:27:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.53<-17302 Statuses=0008 0009 17:27:31 Msec=2250 True Az=176.01 Ze=-79.53 Az status=0008 Ze status=0009 17:27:31 Check angles 17:27:31 SkyScan query 17:27:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.545<-15903 Statuses=0008 0009 17:27:31 Msec=3000 True Az=176.01 Ze=-58.545 Az status=0008 Ze status=0009 17:27:32 Check angles 17:27:32 SkyScan query 17:27:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:27:32 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:27:32 Message to Master queued w/err=0: serial=123755 error=0 17:27:37 Received message from Master: op=Filter serial=123756 17:27:37 Color wheel filter change from 0 to 0 17:27:37 FLIGetFilterPos err=0 currentPosition=0 17:27:37 FLIGetStepsRemaining err=0 RemainingSteps=0 17:27:37 Filter is already there-color wheel unchanged 17:27:37 Received message from Master: op=Shutter serial=123757 17:27:37 Shutter LASER close 17:27:38 Received message from Camera: op=State serial=123759 17:27:38 GetSingleValue result=40 Value=cccccccc 17:27:38 SkyScan query 17:27:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:27:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:38 Parameters OK 17:27:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:38 Set A/D data flow result=40 17:27:38 Set A/D channel type result=40 17:27:38 Set A/D encoding result=40 17:27:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:38 Set channel filter=0.000000e+000 result=40 17:27:38 Config A/D Result=40 17:27:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:38 Get A/D filter: -9.255963e+061 result=40 17:27:38 Get A/D value=-858993460 result=40 17:27:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:38 Parameters OK 17:27:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:38 Set A/D data flow result=40 17:27:38 Set A/D channel type result=40 17:27:38 Set A/D encoding result=40 17:27:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:38 Set channel filter=0.000000e+000 result=40 17:27:38 Config A/D Result=40 17:27:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:38 Get A/D filter: -9.255963e+061 result=40 17:27:38 Get A/D value=-858993460 result=40 17:27:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:27:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:27:38 Aux= 17:27:38 Message to Camera, serial 123759 queued 17:28:15 Received message from Master: op=PointingHead serial=123772 17:28:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:28:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:28:15 Point started: ret=0 17:28:15 point_skyscan result=0 17:28:16 Check angles 17:28:16 SkyScan query 17:28:17 SkyScan query done: ret=0 az=153.15<-10210 ze=-22.08<-13472 Statuses=0009 0009 17:28:17 Msec=0 True Az=153.15 Ze=-22.08 Az status=0009 Ze status=0009 17:28:17 Check angles 17:28:17 SkyScan query 17:28:17 SkyScan query done: ret=0 az=135.87<-9058 ze=-1.065<-12071 Statuses=0009 0009 17:28:17 Msec=750 True Az=135.87 Ze=-1.065 Az status=0009 Ze status=0009 17:28:18 Check angles 17:28:18 SkyScan query 17:28:18 SkyScan query done: ret=0 az=118.29<-7886 ze=19.845<-10677 Statuses=0009 0009 17:28:18 Msec=1500 True Az=118.29 Ze=19.845 Az status=0009 Ze status=0009 17:28:18 Check angles 17:28:18 SkyScan query 17:28:19 SkyScan query done: ret=0 az=100.845<-6723 ze=40.845<-9277 Statuses=0009 0009 17:28:19 Msec=2250 True Az=100.845 Ze=40.845 Az status=0009 Ze status=0009 17:28:19 Check angles 17:28:19 SkyScan query 17:28:20 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 17:28:20 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 17:28:20 Check angles 17:28:20 SkyScan query 17:28:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 17:28:20 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 17:28:20 Message to Master queued w/err=0: serial=123772 error=0 17:28:25 Received message from Master: op=Filter serial=123773 17:28:25 Color wheel filter change from 0 to 0 17:28:25 FLIGetFilterPos err=0 currentPosition=0 17:28:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:28:25 Filter is already there-color wheel unchanged 17:28:26 Received message from Master: op=Shutter serial=123774 17:28:26 Shutter LASER close 17:28:26 Received message from Camera: op=State serial=123776 17:28:26 GetSingleValue result=40 Value=cccccccc 17:28:26 SkyScan query 17:28:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:28:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:26 Parameters OK 17:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:26 Set A/D data flow result=40 17:28:26 Set A/D channel type result=40 17:28:26 Set A/D encoding result=40 17:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:26 Set channel filter=0.000000e+000 result=40 17:28:26 Config A/D Result=40 17:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:26 Get A/D filter: -9.255963e+061 result=40 17:28:26 Get A/D value=-858993460 result=40 17:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:26 Parameters OK 17:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:26 Set A/D data flow result=40 17:28:26 Set A/D channel type result=40 17:28:26 Set A/D encoding result=40 17:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:26 Set channel filter=0.000000e+000 result=40 17:28:26 Config A/D Result=40 17:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:26 Get A/D filter: -9.255963e+061 result=40 17:28:26 Get A/D value=-858993460 result=40 17:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:28:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:28:26 Aux= 17:28:26 Message to Camera, serial 123776 queued 17:29:03 Received message from Master: op=PointingHead serial=123789 17:29:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:29:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:29:03 Point started: ret=0 17:29:03 point_skyscan result=0 17:29:04 Check angles 17:29:04 SkyScan query 17:29:05 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 17:29:05 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 17:29:05 Check angles 17:29:05 SkyScan query 17:29:05 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 17:29:05 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 17:29:06 Check angles 17:29:06 SkyScan query 17:29:06 SkyScan query done: ret=0 az=144.63<-9642 ze=38.505<-9433 Statuses=0009 0008 17:29:06 Msec=1500 True Az=144.63 Ze=38.505 Az status=0009 Ze status=0008 17:29:06 Check angles 17:29:06 SkyScan query 17:29:07 SkyScan query done: ret=0 az=162.525<-10835 ze=38.505<-9433 Statuses=0009 0008 17:29:07 Msec=2250 True Az=162.525 Ze=38.505 Az status=0009 Ze status=0008 17:29:07 Check angles 17:29:07 SkyScan query 17:29:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 17:29:08 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 17:29:08 Check angles 17:29:08 SkyScan query 17:29:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:29:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:29:08 Message to Master queued w/err=0: serial=123789 error=0 17:29:13 Received message from Master: op=Filter serial=123790 17:29:13 Color wheel filter change from 0 to 0 17:29:13 FLIGetFilterPos err=0 currentPosition=0 17:29:13 FLIGetStepsRemaining err=0 RemainingSteps=0 17:29:13 Filter is already there-color wheel unchanged 17:29:14 Received message from Master: op=Shutter serial=123791 17:29:14 Shutter LASER close 17:29:14 Received message from Camera: op=State serial=123793 17:29:14 GetSingleValue result=40 Value=cccccccc 17:29:14 SkyScan query 17:29:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:29:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:14 Parameters OK 17:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:14 Set A/D data flow result=40 17:29:14 Set A/D channel type result=40 17:29:14 Set A/D encoding result=40 17:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:14 Set channel filter=0.000000e+000 result=40 17:29:14 Config A/D Result=40 17:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:14 Get A/D filter: -9.255963e+061 result=40 17:29:14 Get A/D value=-858993460 result=40 17:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:14 Parameters OK 17:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:14 Set A/D data flow result=40 17:29:14 Set A/D channel type result=40 17:29:14 Set A/D encoding result=40 17:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:14 Set channel filter=0.000000e+000 result=40 17:29:14 Config A/D Result=40 17:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:14 Get A/D filter: -9.255963e+061 result=40 17:29:14 Get A/D value=-858993460 result=40 17:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:29:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:29:14 Aux= 17:29:14 Message to Camera, serial 123793 queued 17:29:51 Received message from Master: op=PointingHead serial=123806 17:29:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:29:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:29:52 Point started: ret=0 17:29:52 point_skyscan result=0 17:29:52 Check angles 17:29:52 SkyScan query 17:29:53 SkyScan query done: ret=0 az=153.15<-10210 ze=8.895<-11407 Statuses=0009 0009 17:29:53 Msec=0 True Az=153.15 Ze=8.895 Az status=0009 Ze status=0009 17:29:53 Check angles 17:29:53 SkyScan query 17:29:54 SkyScan query done: ret=0 az=135.69<-9046 ze=-12.09<-12806 Statuses=0009 0009 17:29:54 Msec=750 True Az=135.69 Ze=-12.09 Az status=0009 Ze status=0009 17:29:54 Check angles 17:29:54 SkyScan query 17:29:54 SkyScan query done: ret=0 az=118.17<-7878 ze=-33.18<-14212 Statuses=0009 0009 17:29:54 Msec=1500 True Az=118.17 Ze=-33.18 Az status=0009 Ze status=0009 17:29:55 Check angles 17:29:55 SkyScan query 17:29:55 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 17:29:55 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 17:29:55 Check angles 17:29:55 SkyScan query 17:29:56 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:29:56 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:29:56 Check angles 17:29:56 SkyScan query 17:29:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:29:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:29:57 Message to Master queued w/err=0: serial=123806 error=0 17:30:02 Received message from Master: op=Filter serial=123807 17:30:02 Color wheel filter change from 0 to 0 17:30:02 FLIGetFilterPos err=0 currentPosition=0 17:30:02 FLIGetStepsRemaining err=0 RemainingSteps=0 17:30:02 Filter is already there-color wheel unchanged 17:30:02 Received message from Master: op=Shutter serial=123808 17:30:02 Shutter LASER close 17:30:02 Received message from Camera: op=State serial=123810 17:30:02 GetSingleValue result=40 Value=cccccccc 17:30:02 SkyScan query 17:30:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:30:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:02 Parameters OK 17:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:02 Set A/D data flow result=40 17:30:02 Set A/D channel type result=40 17:30:02 Set A/D encoding result=40 17:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:02 Set channel filter=0.000000e+000 result=40 17:30:02 Config A/D Result=40 17:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:02 Get A/D filter: -9.255963e+061 result=40 17:30:02 Get A/D value=-858993460 result=40 17:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:02 Parameters OK 17:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:02 Set A/D data flow result=40 17:30:02 Set A/D channel type result=40 17:30:02 Set A/D encoding result=40 17:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:02 Set channel filter=0.000000e+000 result=40 17:30:02 Config A/D Result=40 17:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:02 Get A/D filter: -9.255963e+061 result=40 17:30:02 Get A/D value=-858993460 result=40 17:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:30:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:30:02 Aux= 17:30:02 Message to Camera, serial 123810 queued 17:30:39 Received message from Master: op=PointingHead serial=123823 17:30:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:30:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:30:40 Point started: ret=0 17:30:40 point_skyscan result=0 17:30:40 Check angles 17:30:40 SkyScan query 17:30:41 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.165<-17411 Statuses=0009 0009 17:30:41 Msec=0 True Az=108.885 Ze=-81.165 Az status=0009 Ze status=0009 17:30:41 Check angles 17:30:41 SkyScan query 17:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 17:30:42 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 17:30:42 Check angles 17:30:42 SkyScan query 17:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 17:30:42 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 17:30:43 Check angles 17:30:43 SkyScan query 17:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.48<-21632 Statuses=0008 0009 17:30:43 Msec=2250 True Az=112.995 Ze=-144.48 Az status=0008 Ze status=0009 17:30:43 Check angles 17:30:43 SkyScan query 17:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 17:30:44 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 17:30:44 Check angles 17:30:44 SkyScan query 17:30:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:30:45 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:30:45 Message to Master queued w/err=0: serial=123823 error=0 17:30:50 Received message from Master: op=Filter serial=123824 17:30:50 Color wheel filter change from 0 to 0 17:30:50 FLIGetFilterPos err=0 currentPosition=0 17:30:50 FLIGetStepsRemaining err=0 RemainingSteps=0 17:30:50 Filter is already there-color wheel unchanged 17:30:50 Received message from Master: op=Shutter serial=123825 17:30:50 Shutter LASER open 17:30:50 Received message from Camera: op=State serial=123827 17:30:50 GetSingleValue result=40 Value=cccccccc 17:30:50 SkyScan query 17:30:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:30:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:51 Parameters OK 17:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:51 Set A/D data flow result=40 17:30:51 Set A/D channel type result=40 17:30:51 Set A/D encoding result=40 17:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:51 Set channel filter=0.000000e+000 result=40 17:30:51 Config A/D Result=40 17:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:51 Get A/D filter: -9.255963e+061 result=40 17:30:51 Get A/D value=-858993460 result=40 17:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:51 Parameters OK 17:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:51 Set A/D data flow result=40 17:30:51 Set A/D channel type result=40 17:30:51 Set A/D encoding result=40 17:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:51 Set channel filter=0.000000e+000 result=40 17:30:51 Config A/D Result=40 17:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:51 Get A/D filter: -9.255963e+061 result=40 17:30:51 Get A/D value=-858993460 result=40 17:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:30:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:30:51 Aux= 17:30:51 Message to Camera, serial 123827 queued 17:30:59 Received message from Master: op=Shutter serial=123837 17:30:59 Shutter LASER close 17:30:59 Received message from Master: op=PointingHead serial=123841 17:30:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:30:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:31:00 Point started: ret=0 17:31:00 point_skyscan result=0 17:31:01 Check angles 17:31:01 SkyScan query 17:31:01 SkyScan query done: ret=0 az=89.85<-5990 ze=157.245<-1517 Statuses=0009 0009 17:31:01 Msec=0 True Az=89.85 Ze=157.245 Az status=0009 Ze status=0009 17:31:01 Check angles 17:31:01 SkyScan query 17:31:02 SkyScan query done: ret=0 az=72.435<-4829 ze=136.26<-2916 Statuses=0009 0009 17:31:02 Msec=750 True Az=72.435 Ze=136.26 Az status=0009 Ze status=0009 17:31:02 Check angles 17:31:02 SkyScan query 17:31:03 SkyScan query done: ret=0 az=54.915<-3661 ze=115.35<-4310 Statuses=0009 0009 17:31:03 Msec=1500 True Az=54.915 Ze=115.35 Az status=0009 Ze status=0009 17:31:03 Check angles 17:31:03 SkyScan query 17:31:03 SkyScan query done: ret=0 az=40.935<-2729 ze=94.335<-5711 Statuses=0009 0009 17:31:03 Msec=2250 True Az=40.935 Ze=94.335 Az status=0009 Ze status=0009 17:31:04 Check angles 17:31:04 SkyScan query 17:31:04 SkyScan query done: ret=0 az=40.995<-2733 ze=73.41<-7106 Statuses=0008 0009 17:31:04 Msec=3000 True Az=40.995 Ze=73.41 Az status=0008 Ze status=0009 17:31:04 Check angles 17:31:04 SkyScan query 17:31:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.815<-8479 Statuses=0008 0009 17:31:05 Msec=3750 True Az=40.995 Ze=52.815 Az status=0008 Ze status=0009 17:31:05 Check angles 17:31:05 SkyScan query 17:31:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:31:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:31:06 Message to Master queued w/err=0: serial=123841 error=0 17:31:11 Received message from Master: op=Filter serial=123842 17:31:11 Color wheel filter change from 0 to 0 17:31:11 FLIGetFilterPos err=0 currentPosition=0 17:31:11 FLIGetStepsRemaining err=0 RemainingSteps=0 17:31:11 Filter is already there-color wheel unchanged 17:31:11 Received message from Master: op=Shutter serial=123843 17:31:11 Shutter LASER close 17:31:11 Received message from Camera: op=State serial=123845 17:31:11 GetSingleValue result=40 Value=cccccccc 17:31:11 SkyScan query 17:31:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:31:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:12 Parameters OK 17:31:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:12 Set A/D data flow result=40 17:31:12 Set A/D channel type result=40 17:31:12 Set A/D encoding result=40 17:31:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:12 Set channel filter=0.000000e+000 result=40 17:31:12 Config A/D Result=40 17:31:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:12 Get A/D filter: -9.255963e+061 result=40 17:31:12 Get A/D value=-858993460 result=40 17:31:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:12 Parameters OK 17:31:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:12 Set A/D data flow result=40 17:31:12 Set A/D channel type result=40 17:31:12 Set A/D encoding result=40 17:31:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:12 Set channel filter=0.000000e+000 result=40 17:31:12 Config A/D Result=40 17:31:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:12 Get A/D filter: -9.255963e+061 result=40 17:31:12 Get A/D value=-858993460 result=40 17:31:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:31:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:31:12 Aux= 17:31:12 Message to Camera, serial 123845 queued 17:31:48 Received message from Master: op=PointingHead serial=123858 17:31:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:31:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:31:49 Point started: ret=0 17:31:49 point_skyscan result=0 17:31:49 Check angles 17:31:49 SkyScan query 17:31:50 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 17:31:50 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 17:31:50 Check angles 17:31:50 SkyScan query 17:31:51 SkyScan query done: ret=0 az=82.065<-5471 ze=66.495<-7567 Statuses=0009 0008 17:31:51 Msec=750 True Az=82.065 Ze=66.495 Az status=0009 Ze status=0008 17:31:51 Check angles 17:31:51 SkyScan query 17:31:52 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 17:31:52 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 17:31:52 Check angles 17:31:52 SkyScan query 17:31:52 SkyScan query done: ret=0 az=116.97<-7798 ze=66.495<-7567 Statuses=0009 0008 17:31:52 Msec=2250 True Az=116.97 Ze=66.495 Az status=0009 Ze status=0008 17:31:53 Check angles 17:31:53 SkyScan query 17:31:53 SkyScan query done: ret=0 az=134.85<-8990 ze=66.495<-7567 Statuses=0009 0008 17:31:53 Msec=3000 True Az=134.85 Ze=66.495 Az status=0009 Ze status=0008 17:31:53 Check angles 17:31:53 SkyScan query 17:31:54 SkyScan query done: ret=0 az=152.52<-10168 ze=66.495<-7567 Statuses=0009 0008 17:31:54 Msec=3750 True Az=152.52 Ze=66.495 Az status=0009 Ze status=0008 17:31:54 Check angles 17:31:54 SkyScan query 17:31:55 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:31:55 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:31:55 Message to Master queued w/err=0: serial=123858 error=0 17:32:00 Received message from Master: op=Filter serial=123859 17:32:00 Color wheel filter change from 0 to 0 17:32:00 FLIGetFilterPos err=0 currentPosition=0 17:32:00 FLIGetStepsRemaining err=0 RemainingSteps=0 17:32:00 Filter is already there-color wheel unchanged 17:32:00 Received message from Master: op=Shutter serial=123860 17:32:00 Shutter LASER close 17:32:00 Received message from Camera: op=State serial=123862 17:32:00 GetSingleValue result=40 Value=cccccccc 17:32:00 SkyScan query 17:32:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:32:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:00 Parameters OK 17:32:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:00 Set A/D data flow result=40 17:32:00 Set A/D channel type result=40 17:32:00 Set A/D encoding result=40 17:32:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:00 Set channel filter=0.000000e+000 result=40 17:32:00 Config A/D Result=40 17:32:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:00 Get A/D filter: -9.255963e+061 result=40 17:32:00 Get A/D value=-858993460 result=40 17:32:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:00 Parameters OK 17:32:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:00 Set A/D data flow result=40 17:32:00 Set A/D channel type result=40 17:32:00 Set A/D encoding result=40 17:32:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:00 Set channel filter=0.000000e+000 result=40 17:32:00 Config A/D Result=40 17:32:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:00 Get A/D filter: -9.255963e+061 result=40 17:32:00 Get A/D value=-858993460 result=40 17:32:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:32:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:32:00 Aux= 17:32:00 Message to Camera, serial 123862 queued 17:32:37 Received message from Master: op=PointingHead serial=123875 17:32:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:32:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:32:38 Point started: ret=0 17:32:38 point_skyscan result=0 17:32:38 Check angles 17:32:38 SkyScan query 17:32:39 SkyScan query done: ret=0 az=134.805<-8987 ze=36.51<-9566 Statuses=0009 0009 17:32:39 Msec=0 True Az=134.805 Ze=36.51 Az status=0009 Ze status=0009 17:32:39 Check angles 17:32:39 SkyScan query 17:32:40 SkyScan query done: ret=0 az=117.285<-7819 ze=15.6<-10960 Statuses=0009 0009 17:32:40 Msec=750 True Az=117.285 Ze=15.6 Az status=0009 Ze status=0009 17:32:40 Check angles 17:32:40 SkyScan query 17:32:40 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.385<-12359 Statuses=0009 0009 17:32:40 Msec=1500 True Az=99.9 Ze=-5.385 Az status=0009 Ze status=0009 17:32:41 Check angles 17:32:41 SkyScan query 17:32:41 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.82<-13788 Statuses=0009 0009 17:32:41 Msec=2250 True Az=82.125 Ze=-26.82 Az status=0009 Ze status=0009 17:32:41 Check angles 17:32:41 SkyScan query 17:32:42 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.58<-14572 Statuses=0009 0008 17:32:42 Msec=3000 True Az=64.65 Ze=-38.58 Az status=0009 Ze status=0008 17:32:42 Check angles 17:32:42 SkyScan query 17:32:43 SkyScan query done: ret=0 az=46.8<-3120 ze=-38.52<-14568 Statuses=0009 0008 17:32:43 Msec=3750 True Az=46.8 Ze=-38.52 Az status=0009 Ze status=0008 17:32:43 Check angles 17:32:43 SkyScan query 17:32:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:32:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:32:43 Message to Master queued w/err=0: serial=123875 error=0 17:32:48 Received message from Master: op=Filter serial=123876 17:32:48 Color wheel filter change from 0 to 0 17:32:48 FLIGetFilterPos err=0 currentPosition=0 17:32:48 FLIGetStepsRemaining err=0 RemainingSteps=0 17:32:48 Filter is already there-color wheel unchanged 17:32:49 Received message from Master: op=Shutter serial=123877 17:32:49 Shutter LASER close 17:32:49 Received message from Camera: op=State serial=123879 17:32:49 GetSingleValue result=40 Value=cccccccc 17:32:49 SkyScan query 17:32:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:32:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:49 Parameters OK 17:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:49 Set A/D data flow result=40 17:32:49 Set A/D channel type result=40 17:32:49 Set A/D encoding result=40 17:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:49 Set channel filter=0.000000e+000 result=40 17:32:49 Config A/D Result=40 17:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:49 Get A/D filter: -9.255963e+061 result=40 17:32:49 Get A/D value=-858993460 result=40 17:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:49 Parameters OK 17:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:49 Set A/D data flow result=40 17:32:49 Set A/D channel type result=40 17:32:49 Set A/D encoding result=40 17:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:49 Set channel filter=0.000000e+000 result=40 17:32:49 Config A/D Result=40 17:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:49 Get A/D filter: -9.255963e+061 result=40 17:32:49 Get A/D value=-858993460 result=40 17:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:32:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:32:49 Aux= 17:32:49 Message to Camera, serial 123879 queued 17:33:26 Received message from Master: op=PointingHead serial=123892 17:33:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:33:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:33:26 Point started: ret=0 17:33:26 point_skyscan result=0 17:33:27 Check angles 17:33:27 SkyScan query 17:33:28 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.31<-16554 Statuses=0009 0009 17:33:28 Msec=0 True Az=64.23 Ze=-68.31 Az status=0009 Ze status=0009 17:33:28 Check angles 17:33:28 SkyScan query 17:33:28 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.31<-17954 Statuses=0009 0009 17:33:28 Msec=750 True Az=81.585 Ze=-89.31 Az status=0009 Ze status=0009 17:33:29 Check angles 17:33:29 SkyScan query 17:33:29 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.715<-19381 Statuses=0009 0009 17:33:29 Msec=1500 True Az=99.45 Ze=-110.715 Az status=0009 Ze status=0009 17:33:29 Check angles 17:33:29 SkyScan query 17:33:30 SkyScan query done: ret=0 az=116.94<-7796 ze=-131.61<-20774 Statuses=0009 0009 17:33:30 Msec=2250 True Az=116.94 Ze=-131.61 Az status=0009 Ze status=0009 17:33:30 Check angles 17:33:30 SkyScan query 17:33:31 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 17:33:31 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 17:33:31 Check angles 17:33:31 SkyScan query 17:33:32 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:33:32 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:33:32 Message to Master queued w/err=0: serial=123892 error=0 17:33:37 Received message from Master: op=Filter serial=123893 17:33:37 Color wheel filter change from 0 to 0 17:33:37 FLIGetFilterPos err=0 currentPosition=0 17:33:37 FLIGetStepsRemaining err=0 RemainingSteps=0 17:33:37 Filter is already there-color wheel unchanged 17:33:37 Received message from Master: op=Shutter serial=123894 17:33:37 Shutter LASER close 17:33:37 Received message from Camera: op=State serial=123896 17:33:37 GetSingleValue result=40 Value=cccccccc 17:33:37 SkyScan query 17:33:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:33:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:37 Parameters OK 17:33:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:37 Set A/D data flow result=40 17:33:37 Set A/D channel type result=40 17:33:37 Set A/D encoding result=40 17:33:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:37 Set channel filter=0.000000e+000 result=40 17:33:37 Config A/D Result=40 17:33:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:37 Get A/D filter: -9.255963e+061 result=40 17:33:37 Get A/D value=-858993460 result=40 17:33:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:37 Parameters OK 17:33:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:37 Set A/D data flow result=40 17:33:37 Set A/D channel type result=40 17:33:37 Set A/D encoding result=40 17:33:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:37 Set channel filter=0.000000e+000 result=40 17:33:37 Config A/D Result=40 17:33:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:37 Get A/D filter: -9.255963e+061 result=40 17:33:37 Get A/D value=-858993460 result=40 17:33:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:33:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:33:37 Aux= 17:33:37 Message to Camera, serial 123896 queued 17:34:14 Received message from Master: op=PointingHead serial=123909 17:34:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:34:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:34:14 Point started: ret=0 17:34:14 point_skyscan result=0 17:34:15 Check angles 17:34:15 SkyScan query 17:34:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 17:34:16 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 17:34:16 Check angles 17:34:16 SkyScan query 17:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:34:17 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:34:17 Message to Master queued w/err=0: serial=123909 error=0 17:34:22 Received message from Master: op=Filter serial=123910 17:34:22 Color wheel filter change from 0 to 0 17:34:22 FLIGetFilterPos err=0 currentPosition=0 17:34:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:22 Filter is already there-color wheel unchanged 17:34:22 Received message from Master: op=Shutter serial=123911 17:34:22 Shutter LASER open 17:34:22 Received message from Camera: op=State serial=123913 17:34:22 GetSingleValue result=40 Value=cccccccc 17:34:22 SkyScan query 17:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:34:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:22 Parameters OK 17:34:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:22 Set A/D data flow result=40 17:34:22 Set A/D channel type result=40 17:34:22 Set A/D encoding result=40 17:34:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:22 Set channel filter=0.000000e+000 result=40 17:34:22 Config A/D Result=40 17:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:22 Get A/D filter: -9.255963e+061 result=40 17:34:22 Get A/D value=-858993460 result=40 17:34:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:22 Parameters OK 17:34:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:22 Set A/D data flow result=40 17:34:22 Set A/D channel type result=40 17:34:22 Set A/D encoding result=40 17:34:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:22 Set channel filter=0.000000e+000 result=40 17:34:22 Config A/D Result=40 17:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:22 Get A/D filter: -9.255963e+061 result=40 17:34:22 Get A/D value=-858993460 result=40 17:34:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:34:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:34:22 Aux= 17:34:22 Message to Camera, serial 123913 queued 17:34:30 Received message from Master: op=Shutter serial=123922 17:34:30 Shutter LASER close 17:34:31 Received message from Master: op=PointingHead serial=123926 17:34:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:34:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:34:31 Point started: ret=0 17:34:31 point_skyscan result=0 17:34:32 Check angles 17:34:32 SkyScan query 17:34:32 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.115<-21541 Statuses=0009 0009 17:34:32 Msec=0 True Az=136.155 Ze=-143.115 Az status=0009 Ze status=0009 17:34:32 Check angles 17:34:32 SkyScan query 17:34:33 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.175<-20145 Statuses=0009 0009 17:34:33 Msec=750 True Az=153.555 Ze=-122.175 Az status=0009 Ze status=0009 17:34:33 Check angles 17:34:33 SkyScan query 17:34:34 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.25<-18750 Statuses=0009 0009 17:34:34 Msec=1500 True Az=171.09 Ze=-101.25 Az status=0009 Ze status=0009 17:34:34 Check angles 17:34:34 SkyScan query 17:34:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 17:34:35 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 17:34:35 Check angles 17:34:35 SkyScan query 17:34:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.845<-15923 Statuses=0008 0009 17:34:35 Msec=3000 True Az=176.01 Ze=-58.845 Az status=0008 Ze status=0009 17:34:35 Check angles 17:34:35 SkyScan query 17:34:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 17:34:36 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 17:34:36 Message to Master queued w/err=0: serial=123926 error=0 17:34:41 Received message from Master: op=Filter serial=123927 17:34:41 Color wheel filter change from 0 to 0 17:34:41 FLIGetFilterPos err=0 currentPosition=0 17:34:41 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:41 Filter is already there-color wheel unchanged 17:34:41 Received message from Master: op=Shutter serial=123928 17:34:41 Shutter LASER close 17:34:41 Received message from Camera: op=State serial=123930 17:34:41 GetSingleValue result=40 Value=cccccccc 17:34:41 SkyScan query 17:34:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:34:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:42 Parameters OK 17:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:42 Set A/D data flow result=40 17:34:42 Set A/D channel type result=40 17:34:42 Set A/D encoding result=40 17:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:42 Set channel filter=0.000000e+000 result=40 17:34:42 Config A/D Result=40 17:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:42 Get A/D filter: -9.255963e+061 result=40 17:34:42 Get A/D value=-858993460 result=40 17:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:42 Parameters OK 17:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:42 Set A/D data flow result=40 17:34:42 Set A/D channel type result=40 17:34:42 Set A/D encoding result=40 17:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:42 Set channel filter=0.000000e+000 result=40 17:34:42 Config A/D Result=40 17:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:42 Get A/D filter: -9.255963e+061 result=40 17:34:42 Get A/D value=-858993460 result=40 17:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:34:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:34:42 Aux= 17:34:42 Message to Camera, serial 123930 queued 17:35:19 Received message from Master: op=PointingHead serial=123943 17:35:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:35:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:35:19 Point started: ret=0 17:35:19 point_skyscan result=0 17:35:20 Check angles 17:35:20 SkyScan query 17:35:20 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.69<-13446 Statuses=0009 0009 17:35:20 Msec=0 True Az=152.955 Ze=-21.69 Az status=0009 Ze status=0009 17:35:21 Check angles 17:35:21 SkyScan query 17:35:21 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.69<-12046 Statuses=0009 0009 17:35:21 Msec=750 True Az=135.525 Ze=-0.69 Az status=0009 Ze status=0009 17:35:21 Check angles 17:35:21 SkyScan query 17:35:22 SkyScan query done: ret=0 az=117.99<-7866 ze=20.235<-10651 Statuses=0009 0009 17:35:22 Msec=1500 True Az=117.99 Ze=20.235 Az status=0009 Ze status=0009 17:35:22 Check angles 17:35:22 SkyScan query 17:35:23 SkyScan query done: ret=0 az=100.605<-6707 ze=41.235<-9251 Statuses=0009 0009 17:35:23 Msec=2250 True Az=100.605 Ze=41.235 Az status=0009 Ze status=0009 17:35:23 Check angles 17:35:23 SkyScan query 17:35:23 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 17:35:23 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 17:35:24 Check angles 17:35:24 SkyScan query 17:35:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:35:24 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:35:24 Message to Master queued w/err=0: serial=123943 error=0 17:35:29 Received message from Master: op=Filter serial=123944 17:35:29 Color wheel filter change from 0 to 0 17:35:29 FLIGetFilterPos err=0 currentPosition=0 17:35:29 FLIGetStepsRemaining err=0 RemainingSteps=0 17:35:29 Filter is already there-color wheel unchanged 17:35:29 Received message from Master: op=Shutter serial=123945 17:35:29 Shutter LASER close 17:35:29 Received message from Camera: op=State serial=123947 17:35:29 GetSingleValue result=40 Value=cccccccc 17:35:29 SkyScan query [UTC 2018-12-13 17:35:30] 17:35:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:35:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:30 Parameters OK 17:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:30 Set A/D data flow result=40 17:35:30 Set A/D channel type result=40 17:35:30 Set A/D encoding result=40 17:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:30 Set channel filter=0.000000e+000 result=40 17:35:30 Config A/D Result=40 17:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:30 Get A/D filter: -9.255963e+061 result=40 17:35:30 Get A/D value=-858993460 result=40 17:35:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:35:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:30 Parameters OK 17:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:30 Set A/D data flow result=40 17:35:30 Set A/D channel type result=40 17:35:30 Set A/D encoding result=40 17:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:30 Set channel filter=0.000000e+000 result=40 17:35:30 Config A/D Result=40 17:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:30 Get A/D filter: -9.255963e+061 result=40 17:35:30 Get A/D value=-858993460 result=40 17:35:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:35:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:35:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:35:30 Aux= 17:35:30 Message to Camera, serial 123947 queued [UTC 2018-12-13 17:35:52] 17:36:07 Received message from Master: op=PointingHead serial=123960 17:36:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:36:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:36:07 Point started: ret=0 17:36:07 point_skyscan result=0 17:36:08 Check angles 17:36:08 SkyScan query 17:36:09 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 17:36:09 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 17:36:09 Check angles 17:36:09 SkyScan query 17:36:09 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 17:36:09 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 17:36:09 Check angles 17:36:09 SkyScan query 17:36:10 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 17:36:10 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 17:36:10 Check angles 17:36:10 SkyScan query 17:36:11 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 17:36:11 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 17:36:11 Check angles 17:36:11 SkyScan query 17:36:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:36:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:36:12 Check angles 17:36:12 SkyScan query 17:36:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:36:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:36:12 Message to Master queued w/err=0: serial=123960 error=0 17:36:17 Received message from Master: op=Filter serial=123961 17:36:17 Color wheel filter change from 0 to 0 17:36:17 FLIGetFilterPos err=0 currentPosition=0 17:36:17 FLIGetStepsRemaining err=0 RemainingSteps=0 17:36:17 Filter is already there-color wheel unchanged 17:36:17 Received message from Master: op=Shutter serial=123962 17:36:17 Shutter LASER close 17:36:18 Received message from Camera: op=State serial=123964 17:36:18 GetSingleValue result=40 Value=cccccccc 17:36:18 SkyScan query 17:36:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:36:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:18 Parameters OK 17:36:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:18 Set A/D data flow result=40 17:36:18 Set A/D channel type result=40 17:36:18 Set A/D encoding result=40 17:36:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:18 Set channel filter=0.000000e+000 result=40 17:36:18 Config A/D Result=40 17:36:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:18 Get A/D filter: -9.255963e+061 result=40 17:36:18 Get A/D value=-858993460 result=40 17:36:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:18 Parameters OK 17:36:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:18 Set A/D data flow result=40 17:36:18 Set A/D channel type result=40 17:36:18 Set A/D encoding result=40 17:36:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:18 Set channel filter=0.000000e+000 result=40 17:36:18 Config A/D Result=40 17:36:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:18 Get A/D filter: -9.255963e+061 result=40 17:36:18 Get A/D value=-858993460 result=40 17:36:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:36:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:36:18 Aux= 17:36:18 Message to Camera, serial 123964 queued 17:36:56 Received message from Master: op=PointingHead serial=123977 17:36:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:36:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:36:56 Point started: ret=0 17:36:56 point_skyscan result=0 17:36:57 Check angles 17:36:57 SkyScan query 17:36:58 SkyScan query done: ret=0 az=152.535<-10169 ze=68.82<-7412 Statuses=0009 0009 17:36:58 Msec=0 True Az=152.535 Ze=68.82 Az status=0009 Ze status=0009 17:36:58 Check angles 17:36:58 SkyScan query 17:36:58 SkyScan query done: ret=0 az=135.03<-9002 ze=89.85<-6010 Statuses=0009 0009 17:36:58 Msec=750 True Az=135.03 Ze=89.85 Az status=0009 Ze status=0009 17:36:59 Check angles 17:36:59 SkyScan query 17:36:59 SkyScan query done: ret=0 az=117.54<-7836 ze=110.745<-4617 Statuses=0009 0009 17:36:59 Msec=1500 True Az=117.54 Ze=110.745 Az status=0009 Ze status=0009 17:36:59 Check angles 17:36:59 SkyScan query 17:37:00 SkyScan query done: ret=0 az=112.995<-7533 ze=131.715<-3219 Statuses=0008 0009 17:37:00 Msec=2250 True Az=112.995 Ze=131.715 Az status=0008 Ze status=0009 17:37:00 Check angles 17:37:00 SkyScan query 17:37:01 SkyScan query done: ret=0 az=112.995<-7533 ze=152.64<-1824 Statuses=0008 0009 17:37:01 Msec=3000 True Az=112.995 Ze=152.64 Az status=0008 Ze status=0009 17:37:01 Check angles 17:37:01 SkyScan query 17:37:01 SkyScan query done: ret=0 az=112.995<-7533 ze=174.045<-397 Statuses=0008 0009 17:37:01 Msec=3750 True Az=112.995 Ze=174.045 Az status=0008 Ze status=0009 17:37:02 Check angles 17:37:02 SkyScan query 17:37:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 17:37:02 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 17:37:02 Message to Master queued w/err=0: serial=123977 error=0 17:37:07 Received message from Master: op=Filter serial=123978 17:37:07 Color wheel filter change from 0 to 2 17:37:07 FLIGetFilterPos err=0 currentPosition=0 17:37:07 FLIGetStepsRemaining err=0 RemainingSteps=0 17:37:10 FLISetFilterPos err=0 rqPosition=2 17:37:10 FLIGetStepsRemaining err=0 RemainingSteps=0 17:37:10 Check after 0.00 sec for filter wheel DIn/CWh=0 17:37:10 FLIGetFilterPos err=0 currentPosition=2 17:37:10 FLIGetStepsRemaining err=0 RemainingSteps=0 17:37:10 Received message from Master: op=Shutter serial=123979 17:37:10 Shutter LASER close 17:37:11 Received message from Camera: op=State serial=123981 17:37:11 GetSingleValue result=40 Value=cccccccc 17:37:11 SkyScan query 17:37:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:37:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:11 Parameters OK 17:37:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:11 Set A/D data flow result=40 17:37:11 Set A/D channel type result=40 17:37:11 Set A/D encoding result=40 17:37:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:11 Set channel filter=0.000000e+000 result=40 17:37:11 Config A/D Result=40 17:37:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:11 Get A/D filter: -9.255963e+061 result=40 17:37:11 Get A/D value=-858993460 result=40 17:37:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:11 Parameters OK 17:37:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:11 Set A/D data flow result=40 17:37:11 Set A/D channel type result=40 17:37:11 Set A/D encoding result=40 17:37:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:11 Set channel filter=0.000000e+000 result=40 17:37:11 Config A/D Result=40 17:37:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:11 Get A/D filter: -9.255963e+061 result=40 17:37:11 Get A/D value=-858993460 result=40 17:37:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:37:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:37:11 Aux= 17:37:11 Message to Camera, serial 123981 queued 17:37:17 Received message from Master: op=PointingHead serial=123992 17:37:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:37:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:37:17 Point started: ret=0 17:37:17 point_skyscan result=0 17:37:18 Check angles 17:37:18 SkyScan query 17:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 17:37:19 Msec=0 True Az=112.995 Ze=-172.98 Az status=0008 Ze status=0008 17:37:19 Message to Master queued w/err=0: serial=123992 error=0 17:37:24 Received message from Master: op=Filter serial=123993 17:37:24 Color wheel filter change from 2 to 2 17:37:24 FLIGetFilterPos err=0 currentPosition=2 17:37:24 FLIGetStepsRemaining err=0 RemainingSteps=0 17:37:24 Filter is already there-color wheel unchanged 17:37:24 Received message from Master: op=Shutter serial=123994 17:37:24 Shutter LASER close 17:37:24 Received message from Camera: op=State serial=123996 17:37:24 GetSingleValue result=40 Value=cccccccc 17:37:24 SkyScan query 17:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:37:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:25 Parameters OK 17:37:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:25 Set A/D data flow result=40 17:37:25 Set A/D channel type result=40 17:37:25 Set A/D encoding result=40 17:37:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:25 Set channel filter=0.000000e+000 result=40 17:37:25 Config A/D Result=40 17:37:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:25 Get A/D filter: -9.255963e+061 result=40 17:37:25 Get A/D value=-858993460 result=40 17:37:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:25 Parameters OK 17:37:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:25 Set A/D data flow result=40 17:37:25 Set A/D channel type result=40 17:37:25 Set A/D encoding result=40 17:37:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:25 Set channel filter=0.000000e+000 result=40 17:37:25 Config A/D Result=40 17:37:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:25 Get A/D filter: -9.255963e+061 result=40 17:37:25 Get A/D value=-858993460 result=40 17:37:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:37:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:37:25 Aux= 17:37:25 Message to Camera, serial 123996 queued 17:38:01 Received message from Master: op=PointingHead serial=124008 17:38:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:38:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:38:01 Point started: ret=0 17:38:01 point_skyscan result=0 17:38:02 Check angles 17:38:02 SkyScan query 17:38:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:38:02 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:38:02 Message to Master queued w/err=0: serial=124008 error=0 17:38:07 Received message from Master: op=Filter serial=124009 17:38:07 Color wheel filter change from 2 to 2 17:38:07 FLIGetFilterPos err=0 currentPosition=2 17:38:07 FLIGetStepsRemaining err=0 RemainingSteps=0 17:38:07 Filter is already there-color wheel unchanged 17:38:07 Received message from Master: op=Shutter serial=124010 17:38:07 Shutter LASER close 17:38:08 Received message from Camera: op=State serial=124012 17:38:08 GetSingleValue result=40 Value=cccccccc 17:38:08 SkyScan query 17:38:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:38:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:08 Parameters OK 17:38:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:08 Set A/D data flow result=40 17:38:08 Set A/D channel type result=40 17:38:08 Set A/D encoding result=40 17:38:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:08 Set channel filter=0.000000e+000 result=40 17:38:08 Config A/D Result=40 17:38:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:08 Get A/D filter: -9.255963e+061 result=40 17:38:08 Get A/D value=-858993460 result=40 17:38:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:08 Parameters OK 17:38:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:08 Set A/D data flow result=40 17:38:08 Set A/D channel type result=40 17:38:08 Set A/D encoding result=40 17:38:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:08 Set channel filter=0.000000e+000 result=40 17:38:08 Config A/D Result=40 17:38:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:08 Get A/D filter: -9.255963e+061 result=40 17:38:08 Get A/D value=-858993460 result=40 17:38:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:38:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:38:08 Aux= 17:38:08 Message to Camera, serial 124012 queued 17:38:16 Received message from Master: op=Log close serial=124026 17:38:16 Log file close 17:38:16 * END OF LOG *